1 <<NinjaSCSI-32Bi/UDE CardBus/PCI card driver for Linux>>
6 This is Workbit corp.'s(http://www.workbit.co.jp/) NinjaSCSI-32Bi
7 (http://www.workbit.co.jp/ts/z_njsc32bi.html) PCMCIA card and NinjaSCSI-32UDE
8 PCI card driver module for Linux.
14 [1] This driver requires Kernel 2.4.x/2.6.x or later.
15 And you want to load the module when Ninja card was inserted, you also
16 install "hotplug" (http://linux-hotplug.sourceforge.net/) utility.
18 [2] Insert Ninja card to your PC, and check your card is NinjaSCSI-32Bi/UDE
23 01:00.0 SCSI storage controller: I-O Data Device, Inc. CBSC-II duo SCSI PCMCIA card (rev 01)
25 [3] This driver requires Kernel 2.4/2.6's source code. Please install cernel
28 [4] Please check your kernel have PCI, CardBus, PCMCIA and SCSI support.
29 If not, rebuild your kernel. And also requires PCMCIA-CS if you use
32 [5] Extract this archive somewhere.
34 [6] Edit "Makefile" and type "make" to compile the driver.
36 [7] Copy "nsp32.o" to /lib/modules/<kernel version>/kernel/driver/scsi/pcmcia/ .
38 [8] Type "depmod -ae" to re-made "/lib/modules/<kernel version>/modules.pcimap"
40 [9] Ok. Now you can use Ninja card in CardBus mode. Check your Ninja card is in
41 CardBus mode, and insert the card to PC card slot.
46 If you eject card when doing some operation for your SCSI device or suspend
47 your computer, you encount some *BAD* error like disk crash.
48 It works good when I using this driver right way. But I'm not guarantee
49 your data. Please backup your data when you use this driver.
54 No, no, this is Copyleft software. See GPL.