OSDN Git Service

Merge 4.4.136 into android-4.4
[sagit-ice-cold/kernel_xiaomi_msm8998.git] / Makefile
1 VERSION = 4
2 PATCHLEVEL = 4
3 SUBLEVEL = 136
4 EXTRAVERSION =
5 NAME = Blurry Fish Butt
6
7 # *DOCUMENTATION*
8 # To see a list of typical targets execute "make help"
9 # More info can be located in ./README
10 # Comments in this file are targeted only to the developer, do not
11 # expect to learn how to build the kernel reading this file.
12
13 # o Do not use make's built-in rules and variables
14 #   (this increases performance and avoids hard-to-debug behaviour);
15 # o Look for make include files relative to root of kernel src
16 MAKEFLAGS += -rR --include-dir=$(CURDIR)
17
18 # Avoid funny character set dependencies
19 unexport LC_ALL
20 LC_COLLATE=C
21 LC_NUMERIC=C
22 export LC_COLLATE LC_NUMERIC
23
24 # Avoid interference with shell env settings
25 unexport GREP_OPTIONS
26
27 # We are using a recursive build, so we need to do a little thinking
28 # to get the ordering right.
29 #
30 # Most importantly: sub-Makefiles should only ever modify files in
31 # their own directory. If in some directory we have a dependency on
32 # a file in another dir (which doesn't happen often, but it's often
33 # unavoidable when linking the built-in.o targets which finally
34 # turn into vmlinux), we will call a sub make in that other dir, and
35 # after that we are sure that everything which is in that other dir
36 # is now up to date.
37 #
38 # The only cases where we need to modify files which have global
39 # effects are thus separated out and done before the recursive
40 # descending is started. They are now explicitly listed as the
41 # prepare rule.
42
43 # Beautify output
44 # ---------------------------------------------------------------------------
45 #
46 # Normally, we echo the whole command before executing it. By making
47 # that echo $($(quiet)$(cmd)), we now have the possibility to set
48 # $(quiet) to choose other forms of output instead, e.g.
49 #
50 #         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
51 #         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
52 #
53 # If $(quiet) is empty, the whole command will be printed.
54 # If it is set to "quiet_", only the short version will be printed.
55 # If it is set to "silent_", nothing will be printed at all, since
56 # the variable $(silent_cmd_cc_o_c) doesn't exist.
57 #
58 # A simple variant is to prefix commands with $(Q) - that's useful
59 # for commands that shall be hidden in non-verbose mode.
60 #
61 #       $(Q)ln $@ :<
62 #
63 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
64 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
65 #
66 # To put more focus on warnings, be less verbose as default
67 # Use 'make V=1' to see the full commands
68
69 ifeq ("$(origin V)", "command line")
70   KBUILD_VERBOSE = $(V)
71 endif
72 ifndef KBUILD_VERBOSE
73   KBUILD_VERBOSE = 0
74 endif
75
76 ifeq ($(KBUILD_VERBOSE),1)
77   quiet =
78   Q =
79 else
80   quiet=quiet_
81   Q = @
82 endif
83
84 # If the user is running make -s (silent mode), suppress echoing of
85 # commands
86
87 ifneq ($(filter 4.%,$(MAKE_VERSION)),)  # make-4
88 ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
89   quiet=silent_
90   tools_silent=s
91 endif
92 else                                    # make-3.8x
93 ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
94   quiet=silent_
95   tools_silent=-s
96 endif
97 endif
98
99 export quiet Q KBUILD_VERBOSE
100
101 # kbuild supports saving output files in a separate directory.
102 # To locate output files in a separate directory two syntaxes are supported.
103 # In both cases the working directory must be the root of the kernel src.
104 # 1) O=
105 # Use "make O=dir/to/store/output/files/"
106 #
107 # 2) Set KBUILD_OUTPUT
108 # Set the environment variable KBUILD_OUTPUT to point to the directory
109 # where the output files shall be placed.
110 # export KBUILD_OUTPUT=dir/to/store/output/files/
111 # make
112 #
113 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
114 # variable.
115
116 # KBUILD_SRC is set on invocation of make in OBJ directory
117 # KBUILD_SRC is not intended to be used by the regular user (for now)
118 ifeq ($(KBUILD_SRC),)
119
120 # OK, Make called in directory where kernel src resides
121 # Do we want to locate output files in a separate directory?
122 ifeq ("$(origin O)", "command line")
123   KBUILD_OUTPUT := $(O)
124 endif
125
126 # That's our default target when none is given on the command line
127 PHONY := _all
128 _all:
129
130 # Cancel implicit rules on top Makefile
131 $(CURDIR)/Makefile Makefile: ;
132
133 ifneq ($(words $(subst :, ,$(CURDIR))), 1)
134   $(error main directory cannot contain spaces nor colons)
135 endif
136
137 ifneq ($(KBUILD_OUTPUT),)
138 # Invoke a second make in the output directory, passing relevant variables
139 # check that the output directory actually exists
140 saved-output := $(KBUILD_OUTPUT)
141 KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
142                                                                 && /bin/pwd)
143 $(if $(KBUILD_OUTPUT),, \
144      $(error failed to create output directory "$(saved-output)"))
145
146 PHONY += $(MAKECMDGOALS) sub-make
147
148 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
149         @:
150
151 sub-make:
152         $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
153         -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
154
155 # Leave processing to above invocation of make
156 skip-makefile := 1
157 endif # ifneq ($(KBUILD_OUTPUT),)
158 endif # ifeq ($(KBUILD_SRC),)
159
160 # We process the rest of the Makefile if this is the final invocation of make
161 ifeq ($(skip-makefile),)
162
163 # Do not print "Entering directory ...",
164 # but we want to display it when entering to the output directory
165 # so that IDEs/editors are able to understand relative filenames.
166 MAKEFLAGS += --no-print-directory
167
168 # Call a source code checker (by default, "sparse") as part of the
169 # C compilation.
170 #
171 # Use 'make C=1' to enable checking of only re-compiled files.
172 # Use 'make C=2' to enable checking of *all* source files, regardless
173 # of whether they are re-compiled or not.
174 #
175 # See the file "Documentation/sparse.txt" for more details, including
176 # where to get the "sparse" utility.
177
178 ifeq ("$(origin C)", "command line")
179   KBUILD_CHECKSRC = $(C)
180 endif
181 ifndef KBUILD_CHECKSRC
182   KBUILD_CHECKSRC = 0
183 endif
184
185 # Use make M=dir to specify directory of external module to build
186 # Old syntax make ... SUBDIRS=$PWD is still supported
187 # Setting the environment variable KBUILD_EXTMOD take precedence
188 ifdef SUBDIRS
189   KBUILD_EXTMOD ?= $(SUBDIRS)
190 endif
191
192 ifeq ("$(origin M)", "command line")
193   KBUILD_EXTMOD := $(M)
194 endif
195
196 # If building an external module we do not care about the all: rule
197 # but instead _all depend on modules
198 PHONY += all
199 ifeq ($(KBUILD_EXTMOD),)
200 _all: all
201 else
202 _all: modules
203 endif
204
205 ifeq ($(KBUILD_SRC),)
206         # building in the source tree
207         srctree := .
208 else
209         ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
210                 # building in a subdirectory of the source tree
211                 srctree := ..
212         else
213                 srctree := $(KBUILD_SRC)
214         endif
215 endif
216 objtree         := .
217 src             := $(srctree)
218 obj             := $(objtree)
219
220 VPATH           := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
221
222 export srctree objtree VPATH
223
224 # SUBARCH tells the usermode build what the underlying arch is.  That is set
225 # first, and if a usermode build is happening, the "ARCH=um" on the command
226 # line overrides the setting of ARCH below.  If a native build is happening,
227 # then ARCH is assigned, getting whatever value it gets normally, and
228 # SUBARCH is subsequently ignored.
229
230 SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
231                                   -e s/sun4u/sparc64/ \
232                                   -e s/arm.*/arm/ -e s/sa110/arm/ \
233                                   -e s/s390x/s390/ -e s/parisc64/parisc/ \
234                                   -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
235                                   -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
236
237 # Cross compiling and selecting different set of gcc/bin-utils
238 # ---------------------------------------------------------------------------
239 #
240 # When performing cross compilation for other architectures ARCH shall be set
241 # to the target architecture. (See arch/* for the possibilities).
242 # ARCH can be set during invocation of make:
243 # make ARCH=ia64
244 # Another way is to have ARCH set in the environment.
245 # The default ARCH is the host where make is executed.
246
247 # CROSS_COMPILE specify the prefix used for all executables used
248 # during compilation. Only gcc and related bin-utils executables
249 # are prefixed with $(CROSS_COMPILE).
250 # CROSS_COMPILE can be set on the command line
251 # make CROSS_COMPILE=ia64-linux-
252 # Alternatively CROSS_COMPILE can be set in the environment.
253 # A third alternative is to store a setting in .config so that plain
254 # "make" in the configured kernel build directory always uses that.
255 # Default value for CROSS_COMPILE is not to prefix executables
256 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
257 ARCH            ?= $(SUBARCH)
258 CROSS_COMPILE   ?= $(CONFIG_CROSS_COMPILE:"%"=%)
259
260 # Architecture as present in compile.h
261 UTS_MACHINE     := $(ARCH)
262 SRCARCH         := $(ARCH)
263
264 # Additional ARCH settings for x86
265 ifeq ($(ARCH),i386)
266         SRCARCH := x86
267 endif
268 ifeq ($(ARCH),x86_64)
269         SRCARCH := x86
270 endif
271
272 # Additional ARCH settings for sparc
273 ifeq ($(ARCH),sparc32)
274        SRCARCH := sparc
275 endif
276 ifeq ($(ARCH),sparc64)
277        SRCARCH := sparc
278 endif
279
280 # Additional ARCH settings for sh
281 ifeq ($(ARCH),sh64)
282        SRCARCH := sh
283 endif
284
285 # Additional ARCH settings for tile
286 ifeq ($(ARCH),tilepro)
287        SRCARCH := tile
288 endif
289 ifeq ($(ARCH),tilegx)
290        SRCARCH := tile
291 endif
292
293 # Where to locate arch specific headers
294 hdr-arch  := $(SRCARCH)
295
296 KCONFIG_CONFIG  ?= .config
297 export KCONFIG_CONFIG
298
299 # SHELL used by kbuild
300 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
301           else if [ -x /bin/bash ]; then echo /bin/bash; \
302           else echo sh; fi ; fi)
303
304 HOSTCC       = gcc
305 HOSTCXX      = g++
306 HOSTCFLAGS   := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89
307 HOSTCXXFLAGS = -O2
308
309 ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1)
310 HOSTCFLAGS  += -Wno-unused-value -Wno-unused-parameter \
311                 -Wno-missing-field-initializers -fno-delete-null-pointer-checks
312 endif
313
314 # Decide whether to build built-in, modular, or both.
315 # Normally, just do built-in.
316
317 KBUILD_MODULES :=
318 KBUILD_BUILTIN := 1
319
320 # If we have only "make modules", don't compile built-in objects.
321 # When we're building modules with modversions, we need to consider
322 # the built-in objects during the descend as well, in order to
323 # make sure the checksums are up to date before we record them.
324
325 ifeq ($(MAKECMDGOALS),modules)
326   KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
327 endif
328
329 # If we have "make <whatever> modules", compile modules
330 # in addition to whatever we do anyway.
331 # Just "make" or "make all" shall build modules as well
332
333 ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
334   KBUILD_MODULES := 1
335 endif
336
337 ifeq ($(MAKECMDGOALS),)
338   KBUILD_MODULES := 1
339 endif
340
341 export KBUILD_MODULES KBUILD_BUILTIN
342 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
343
344 # We need some generic definitions (do not try to remake the file).
345 scripts/Kbuild.include: ;
346 include scripts/Kbuild.include
347
348 # Make variables (CC, etc...)
349 AS              = $(CROSS_COMPILE)as
350 LD              = $(CROSS_COMPILE)ld
351 CC              = $(CROSS_COMPILE)gcc
352 CPP             = $(CC) -E
353 AR              = $(CROSS_COMPILE)ar
354 NM              = $(CROSS_COMPILE)nm
355 STRIP           = $(CROSS_COMPILE)strip
356 OBJCOPY         = $(CROSS_COMPILE)objcopy
357 OBJDUMP         = $(CROSS_COMPILE)objdump
358 AWK             = awk
359 GENKSYMS        = scripts/genksyms/genksyms
360 INSTALLKERNEL  := installkernel
361 DEPMOD          = /sbin/depmod
362 PERL            = perl
363 PYTHON          = python
364 CHECK           = sparse
365
366 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
367                   -Wbitwise -Wno-return-void $(CF)
368 CFLAGS_MODULE   =
369 AFLAGS_MODULE   =
370 LDFLAGS_MODULE  =
371 CFLAGS_KERNEL   =
372 AFLAGS_KERNEL   =
373 CFLAGS_GCOV     = -fprofile-arcs -ftest-coverage -fno-tree-loop-im
374 CFLAGS_KCOV     = -fsanitize-coverage=trace-pc
375
376
377 # Use USERINCLUDE when you must reference the UAPI directories only.
378 USERINCLUDE    := \
379                 -I$(srctree)/arch/$(hdr-arch)/include/uapi \
380                 -Iarch/$(hdr-arch)/include/generated/uapi \
381                 -I$(srctree)/include/uapi \
382                 -Iinclude/generated/uapi \
383                 -include $(srctree)/include/linux/kconfig.h
384
385 # Use LINUXINCLUDE when you must reference the include/ directory.
386 # Needed to be compatible with the O= option
387 LINUXINCLUDE    := \
388                 -I$(srctree)/arch/$(hdr-arch)/include \
389                 -Iarch/$(hdr-arch)/include/generated/uapi \
390                 -Iarch/$(hdr-arch)/include/generated \
391                 $(if $(KBUILD_SRC), -I$(srctree)/include) \
392                 -Iinclude \
393                 $(USERINCLUDE)
394
395 KBUILD_CPPFLAGS := -D__KERNEL__
396
397 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
398                    -fno-strict-aliasing -fno-common \
399                    -Werror-implicit-function-declaration \
400                    -Wno-format-security \
401                    -std=gnu89 $(call cc-option,-fno-PIE)
402
403
404 KBUILD_AFLAGS_KERNEL :=
405 KBUILD_CFLAGS_KERNEL :=
406 KBUILD_AFLAGS   := -D__ASSEMBLY__ $(call cc-option,-fno-PIE)
407 KBUILD_AFLAGS_MODULE  := -DMODULE
408 KBUILD_CFLAGS_MODULE  := -DMODULE
409 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
410
411 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
412 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
413 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
414
415 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
416 export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
417 export CPP AR NM STRIP OBJCOPY OBJDUMP
418 export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE
419 export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
420
421 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
422 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV CFLAGS_KCOV CFLAGS_KASAN
423 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
424 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
425 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
426 export KBUILD_ARFLAGS
427
428 # When compiling out-of-tree modules, put MODVERDIR in the module
429 # tree rather than in the kernel tree. The kernel tree might
430 # even be read-only.
431 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
432
433 # Files to ignore in find ... statements
434
435 export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o    \
436                           -name CVS -o -name .pc -o -name .hg -o -name .git \) \
437                           -prune -o
438 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
439                          --exclude CVS --exclude .pc --exclude .hg --exclude .git
440
441 # ===========================================================================
442 # Rules shared between *config targets and build targets
443
444 # Basic helpers built in scripts/
445 PHONY += scripts_basic
446 scripts_basic:
447         $(Q)$(MAKE) $(build)=scripts/basic
448         $(Q)rm -f .tmp_quiet_recordmcount
449
450 # To avoid any implicit rule to kick in, define an empty command.
451 scripts/basic/%: scripts_basic ;
452
453 PHONY += outputmakefile
454 # outputmakefile generates a Makefile in the output directory, if using a
455 # separate output directory. This allows convenient use of make in the
456 # output directory.
457 outputmakefile:
458 ifneq ($(KBUILD_SRC),)
459         $(Q)ln -fsn $(srctree) source
460         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
461             $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
462 endif
463
464 # Support for using generic headers in asm-generic
465 PHONY += asm-generic
466 asm-generic:
467         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
468                     src=asm obj=arch/$(SRCARCH)/include/generated/asm
469         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
470                     src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm
471
472 # To make sure we do not include .config for any of the *config targets
473 # catch them early, and hand them over to scripts/kconfig/Makefile
474 # It is allowed to specify more targets when calling make, including
475 # mixing *config targets and build targets.
476 # For example 'make oldconfig all'.
477 # Detect when mixed targets is specified, and make a second invocation
478 # of make so .config is not included in this case either (for *config).
479
480 version_h := include/generated/uapi/linux/version.h
481 old_version_h := include/linux/version.h
482
483 no-dot-config-targets := clean mrproper distclean \
484                          cscope gtags TAGS tags help% %docs check% coccicheck \
485                          $(version_h) headers_% archheaders archscripts \
486                          kernelversion %src-pkg
487
488 config-targets := 0
489 mixed-targets  := 0
490 dot-config     := 1
491
492 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
493         ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
494                 dot-config := 0
495         endif
496 endif
497
498 ifeq ($(KBUILD_EXTMOD),)
499         ifneq ($(filter config %config,$(MAKECMDGOALS)),)
500                 config-targets := 1
501                 ifneq ($(words $(MAKECMDGOALS)),1)
502                         mixed-targets := 1
503                 endif
504         endif
505 endif
506 # install and module_install need also be processed one by one
507 ifneq ($(filter install,$(MAKECMDGOALS)),)
508         ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
509                 mixed-targets := 1
510         endif
511 endif
512
513 ifeq ($(mixed-targets),1)
514 # ===========================================================================
515 # We're called with mixed targets (*config and build targets).
516 # Handle them one by one.
517
518 PHONY += $(MAKECMDGOALS) __build_one_by_one
519
520 $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
521         @:
522
523 __build_one_by_one:
524         $(Q)set -e; \
525         for i in $(MAKECMDGOALS); do \
526                 $(MAKE) -f $(srctree)/Makefile $$i; \
527         done
528
529 else
530 ifeq ($(config-targets),1)
531 # ===========================================================================
532 # *config targets only - make sure prerequisites are updated, and descend
533 # in scripts/kconfig to make the *config target
534
535 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
536 # KBUILD_DEFCONFIG may point out an alternative default configuration
537 # used for 'make defconfig'
538 include arch/$(SRCARCH)/Makefile
539 export KBUILD_DEFCONFIG KBUILD_KCONFIG
540
541 config: scripts_basic outputmakefile FORCE
542         $(Q)$(MAKE) $(build)=scripts/kconfig $@
543
544 %config: scripts_basic outputmakefile FORCE
545         $(Q)$(MAKE) $(build)=scripts/kconfig $@
546
547 else
548 # ===========================================================================
549 # Build targets only - this includes vmlinux, arch specific targets, clean
550 # targets and others. In general all targets except *config targets.
551
552 ifeq ($(KBUILD_EXTMOD),)
553 # Additional helpers built in scripts/
554 # Carefully list dependencies so we do not try to build scripts twice
555 # in parallel
556 PHONY += scripts
557 scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \
558          asm-generic
559         $(Q)$(MAKE) $(build)=$(@)
560
561 # Objects we will link into vmlinux / subdirs we need to visit
562 init-y          := init/
563 drivers-y       := drivers/ sound/ firmware/
564 net-y           := net/
565 libs-y          := lib/
566 core-y          := usr/
567 virt-y          := virt/
568 endif # KBUILD_EXTMOD
569
570 ifeq ($(dot-config),1)
571 # Read in config
572 -include include/config/auto.conf
573
574 ifeq ($(KBUILD_EXTMOD),)
575 # Read in dependencies to all Kconfig* files, make sure to run
576 # oldconfig if changes are detected.
577 -include include/config/auto.conf.cmd
578
579 # To avoid any implicit rule to kick in, define an empty command
580 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
581
582 # If .config is newer than include/config/auto.conf, someone tinkered
583 # with it and forgot to run make oldconfig.
584 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
585 # we execute the config step to be sure to catch updated Kconfig files
586 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
587         $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
588 else
589 # external modules needs include/generated/autoconf.h and include/config/auto.conf
590 # but do not care if they are up-to-date. Use auto.conf to trigger the test
591 PHONY += include/config/auto.conf
592
593 include/config/auto.conf:
594         $(Q)test -e include/generated/autoconf.h -a -e $@ || (          \
595         echo >&2;                                                       \
596         echo >&2 "  ERROR: Kernel configuration is invalid.";           \
597         echo >&2 "         include/generated/autoconf.h or $@ are missing.";\
598         echo >&2 "         Run 'make oldconfig && make prepare' on kernel src to fix it.";      \
599         echo >&2 ;                                                      \
600         /bin/false)
601
602 endif # KBUILD_EXTMOD
603
604 else
605 # Dummy target needed, because used as prerequisite
606 include/config/auto.conf: ;
607 endif # $(dot-config)
608
609 # The all: target is the default when no target is given on the
610 # command line.
611 # This allow a user to issue only 'make' to build a kernel including modules
612 # Defaults to vmlinux, but the arch makefile usually adds further targets
613 all: vmlinux
614
615 # The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
616 # values of the respective KBUILD_* variables
617 ARCH_CPPFLAGS :=
618 ARCH_AFLAGS :=
619 ARCH_CFLAGS :=
620 include arch/$(SRCARCH)/Makefile
621
622 KBUILD_CFLAGS   += $(call cc-option,-fno-delete-null-pointer-checks,)
623 KBUILD_CFLAGS   += $(call cc-disable-warning,maybe-uninitialized,)
624 KBUILD_CFLAGS   += $(call cc-disable-warning,frame-address,)
625 KBUILD_CFLAGS   += $(call cc-disable-warning, format-truncation)
626 KBUILD_CFLAGS   += $(call cc-disable-warning, format-overflow)
627 KBUILD_CFLAGS   += $(call cc-disable-warning, int-in-bool-context)
628
629 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
630 KBUILD_CFLAGS   += $(call cc-option,-Oz,-Os)
631 else
632 ifdef CONFIG_PROFILE_ALL_BRANCHES
633 KBUILD_CFLAGS   += -O2
634 else
635 KBUILD_CFLAGS   += -O2
636 endif
637 endif
638
639 # Tell gcc to never replace conditional load with a non-conditional one
640 KBUILD_CFLAGS   += $(call cc-option,--param=allow-store-data-races=0)
641
642 # check for 'asm goto'
643 ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
644         KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
645         KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
646 endif
647
648 ifdef CONFIG_READABLE_ASM
649 # Disable optimizations that make assembler listings hard to read.
650 # reorder blocks reorders the control in the function
651 # ipa clone creates specialized cloned functions
652 # partial inlining inlines only parts of functions
653 KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \
654                  $(call cc-option,-fno-ipa-cp-clone,) \
655                  $(call cc-option,-fno-partial-inlining)
656 endif
657
658 ifneq ($(CONFIG_FRAME_WARN),0)
659 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
660 endif
661
662 # Handle stack protector mode.
663 #
664 # Since kbuild can potentially perform two passes (first with the old
665 # .config values and then with updated .config values), we cannot error out
666 # if a desired compiler option is unsupported. If we were to error, kbuild
667 # could never get to the second pass and actually notice that we changed
668 # the option to something that was supported.
669 #
670 # Additionally, we don't want to fallback and/or silently change which compiler
671 # flags will be used, since that leads to producing kernels with different
672 # security feature characteristics depending on the compiler used. ("But I
673 # selected CC_STACKPROTECTOR_STRONG! Why did it build with _REGULAR?!")
674 #
675 # The middle ground is to warn here so that the failed option is obvious, but
676 # to let the build fail with bad compiler flags so that we can't produce a
677 # kernel when there is a CONFIG and compiler mismatch.
678 #
679 ifdef CONFIG_CC_STACKPROTECTOR_REGULAR
680   stackp-flag := -fstack-protector
681   ifeq ($(call cc-option, $(stackp-flag)),)
682     $(warning Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: \
683              -fstack-protector not supported by compiler)
684   endif
685 else
686 ifdef CONFIG_CC_STACKPROTECTOR_STRONG
687   stackp-flag := -fstack-protector-strong
688   ifeq ($(call cc-option, $(stackp-flag)),)
689     $(warning Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: \
690               -fstack-protector-strong not supported by compiler)
691   endif
692 else
693   # Force off for distro compilers that enable stack protector by default.
694   stackp-flag := $(call cc-option, -fno-stack-protector)
695 endif
696 endif
697 KBUILD_CFLAGS += $(stackp-flag)
698
699 ifdef CONFIG_KCOV
700   ifeq ($(call cc-option, $(CFLAGS_KCOV)),)
701     $(warning Cannot use CONFIG_KCOV: \
702              -fsanitize-coverage=trace-pc is not supported by compiler)
703     CFLAGS_KCOV =
704   endif
705 endif
706
707 ifeq ($(cc-name),clang)
708 ifneq ($(CROSS_COMPILE),)
709 CLANG_TRIPLE    ?= $(CROSS_COMPILE)
710 CLANG_TARGET    := --target=$(notdir $(CLANG_TRIPLE:%-=%))
711 GCC_TOOLCHAIN   := $(realpath $(dir $(shell which $(LD)))/..)
712 endif
713 ifneq ($(GCC_TOOLCHAIN),)
714 CLANG_GCC_TC    := --gcc-toolchain=$(GCC_TOOLCHAIN)
715 endif
716 KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
717 KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
718 KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
719 KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable)
720 KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
721 KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
722 KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
723 KBUILD_CFLAGS += $(call cc-disable-warning, duplicate-decl-specifier)
724 # Quiet clang warning: comparison of unsigned expression < 0 is always false
725 KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
726 # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
727 # source of a reference will be _MergedGlobals and not on of the whitelisted names.
728 # See modpost pattern 2
729 KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
730 KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
731 KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
732 KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
733 else
734
735 # These warnings generated too much noise in a regular build.
736 # Use make W=1 to enable them (see scripts/Makefile.build)
737 KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
738 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
739 endif
740
741 ifdef CONFIG_FRAME_POINTER
742 KBUILD_CFLAGS   += -fno-omit-frame-pointer -fno-optimize-sibling-calls
743 else
744 # Some targets (ARM with Thumb2, for example), can't be built with frame
745 # pointers.  For those, we don't have FUNCTION_TRACER automatically
746 # select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
747 # incompatible with -fomit-frame-pointer with current GCC, so we don't use
748 # -fomit-frame-pointer with FUNCTION_TRACER.
749 ifndef CONFIG_FUNCTION_TRACER
750 KBUILD_CFLAGS   += -fomit-frame-pointer
751 endif
752 endif
753
754 KBUILD_CFLAGS   += $(call cc-option, -fno-var-tracking-assignments)
755
756 ifdef CONFIG_DEBUG_INFO
757 ifdef CONFIG_DEBUG_INFO_SPLIT
758 KBUILD_CFLAGS   += $(call cc-option, -gsplit-dwarf, -g)
759 else
760 KBUILD_CFLAGS   += -g
761 endif
762 KBUILD_AFLAGS   += -Wa,-gdwarf-2
763 endif
764 ifdef CONFIG_DEBUG_INFO_DWARF4
765 KBUILD_CFLAGS   += $(call cc-option, -gdwarf-4,)
766 endif
767
768 ifdef CONFIG_DEBUG_INFO_REDUCED
769 KBUILD_CFLAGS   += $(call cc-option, -femit-struct-debug-baseonly) \
770                    $(call cc-option,-fno-var-tracking)
771 endif
772
773 ifdef CONFIG_FUNCTION_TRACER
774 ifndef CC_FLAGS_FTRACE
775 CC_FLAGS_FTRACE := -pg
776 endif
777 export CC_FLAGS_FTRACE
778 ifdef CONFIG_HAVE_FENTRY
779 CC_USING_FENTRY := $(call cc-option, -mfentry -DCC_USING_FENTRY)
780 endif
781 KBUILD_CFLAGS   += $(CC_FLAGS_FTRACE) $(CC_USING_FENTRY)
782 KBUILD_AFLAGS   += $(CC_USING_FENTRY)
783 ifdef CONFIG_DYNAMIC_FTRACE
784         ifdef CONFIG_HAVE_C_RECORDMCOUNT
785                 BUILD_C_RECORDMCOUNT := y
786                 export BUILD_C_RECORDMCOUNT
787         endif
788 endif
789 endif
790
791 # We trigger additional mismatches with less inlining
792 ifdef CONFIG_DEBUG_SECTION_MISMATCH
793 KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
794 endif
795
796 # arch Makefile may override CC so keep this after arch Makefile is included
797 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
798 CHECKFLAGS     += $(NOSTDINC_FLAGS)
799
800 # warn about C99 declaration after statement
801 KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
802
803 # disable pointer signed / unsigned warnings in gcc 4.0
804 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
805
806 # disable invalid "can't wrap" optimizations for signed / pointers
807 KBUILD_CFLAGS   += $(call cc-option,-fno-strict-overflow)
808
809 # clang sets -fmerge-all-constants by default as optimization, but this
810 # is non-conforming behavior for C and in fact breaks the kernel, so we
811 # need to disable it here generally.
812 KBUILD_CFLAGS   += $(call cc-option,-fno-merge-all-constants)
813
814 # for gcc -fno-merge-all-constants disables everything, but it is fine
815 # to have actual conforming behavior enabled.
816 KBUILD_CFLAGS   += $(call cc-option,-fmerge-constants)
817
818 # Make sure -fstack-check isn't enabled (like gentoo apparently did)
819 KBUILD_CFLAGS  += $(call cc-option,-fno-stack-check,)
820
821 # conserve stack if available
822 KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
823
824 # disallow errors like 'EXPORT_GPL(foo);' with missing header
825 KBUILD_CFLAGS   += $(call cc-option,-Werror=implicit-int)
826
827 # require functions to have arguments in prototypes, not empty 'int foo()'
828 KBUILD_CFLAGS   += $(call cc-option,-Werror=strict-prototypes)
829
830 # Prohibit date/time macros, which would make the build non-deterministic
831 KBUILD_CFLAGS   += $(call cc-option,-Werror=date-time)
832
833 # use the deterministic mode of AR if available
834 KBUILD_ARFLAGS := $(call ar-option,D)
835
836 include scripts/Makefile.kasan
837 include scripts/Makefile.extrawarn
838
839 # Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the
840 # last assignments
841 KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS)
842 KBUILD_AFLAGS   += $(ARCH_AFLAGS)   $(KAFLAGS)
843 KBUILD_CFLAGS   += $(ARCH_CFLAGS)   $(KCFLAGS)
844
845 # Use --build-id when available.
846 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
847                               $(call cc-ldoption, -Wl$(comma)--build-id,))
848 KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
849 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
850
851 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
852 LDFLAGS_vmlinux += $(call ld-option, -X,)
853 endif
854
855 # Default kernel image to build when no specific target is given.
856 # KBUILD_IMAGE may be overruled on the command line or
857 # set in the environment
858 # Also any assignments in arch/$(ARCH)/Makefile take precedence over
859 # this default value
860 export KBUILD_IMAGE ?= vmlinux
861
862 #
863 # INSTALL_PATH specifies where to place the updated kernel and system map
864 # images. Default is /boot, but you can set it to other values
865 export  INSTALL_PATH ?= /boot
866
867 #
868 # INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots.
869 # Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as
870 # an argument if needed. Otherwise it defaults to the kernel install path
871 #
872 export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE)
873
874 #
875 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
876 # relocations required by build roots.  This is not defined in the
877 # makefile but the argument can be passed to make if needed.
878 #
879
880 MODLIB  = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
881 export MODLIB
882
883 #
884 # INSTALL_MOD_STRIP, if defined, will cause modules to be
885 # stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
886 # the default option --strip-debug will be used.  Otherwise,
887 # INSTALL_MOD_STRIP value will be used as the options to the strip command.
888
889 ifdef INSTALL_MOD_STRIP
890 ifeq ($(INSTALL_MOD_STRIP),1)
891 mod_strip_cmd = $(STRIP) --strip-debug
892 else
893 mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
894 endif # INSTALL_MOD_STRIP=1
895 else
896 mod_strip_cmd = true
897 endif # INSTALL_MOD_STRIP
898 export mod_strip_cmd
899
900 # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed
901 # after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP
902 # or CONFIG_MODULE_COMPRESS_XZ.
903
904 mod_compress_cmd = true
905 ifdef CONFIG_MODULE_COMPRESS
906   ifdef CONFIG_MODULE_COMPRESS_GZIP
907     mod_compress_cmd = gzip -n -f
908   endif # CONFIG_MODULE_COMPRESS_GZIP
909   ifdef CONFIG_MODULE_COMPRESS_XZ
910     mod_compress_cmd = xz -f
911   endif # CONFIG_MODULE_COMPRESS_XZ
912 endif # CONFIG_MODULE_COMPRESS
913 export mod_compress_cmd
914
915 # Select initial ramdisk compression format, default is gzip(1).
916 # This shall be used by the dracut(8) tool while creating an initramfs image.
917 #
918 INITRD_COMPRESS-y                  := gzip
919 INITRD_COMPRESS-$(CONFIG_RD_BZIP2) := bzip2
920 INITRD_COMPRESS-$(CONFIG_RD_LZMA)  := lzma
921 INITRD_COMPRESS-$(CONFIG_RD_XZ)    := xz
922 INITRD_COMPRESS-$(CONFIG_RD_LZO)   := lzo
923 INITRD_COMPRESS-$(CONFIG_RD_LZ4)   := lz4
924 # do not export INITRD_COMPRESS, since we didn't actually
925 # choose a sane default compression above.
926 # export INITRD_COMPRESS := $(INITRD_COMPRESS-y)
927
928 ifdef CONFIG_MODULE_SIG_ALL
929 $(eval $(call config_filename,MODULE_SIG_KEY))
930
931 mod_sign_cmd = scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODULE_SIG_KEY_SRCPREFIX)$(CONFIG_MODULE_SIG_KEY) certs/signing_key.x509
932 else
933 mod_sign_cmd = true
934 endif
935 export mod_sign_cmd
936
937
938 ifeq ($(KBUILD_EXTMOD),)
939 core-y          += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
940
941 vmlinux-dirs    := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
942                      $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
943                      $(net-y) $(net-m) $(libs-y) $(libs-m) $(virt-y)))
944
945 vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
946                      $(init-) $(core-) $(drivers-) $(net-) $(libs-) $(virt-))))
947
948 init-y          := $(patsubst %/, %/built-in.o, $(init-y))
949 core-y          := $(patsubst %/, %/built-in.o, $(core-y))
950 drivers-y       := $(patsubst %/, %/built-in.o, $(drivers-y))
951 net-y           := $(patsubst %/, %/built-in.o, $(net-y))
952 libs-y1         := $(patsubst %/, %/lib.a, $(libs-y))
953 libs-y2         := $(patsubst %/, %/built-in.o, $(libs-y))
954 libs-y          := $(libs-y1) $(libs-y2)
955 virt-y          := $(patsubst %/, %/built-in.o, $(virt-y))
956
957 # Externally visible symbols (used by link-vmlinux.sh)
958 export KBUILD_VMLINUX_INIT := $(head-y) $(init-y)
959 export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y) $(virt-y)
960 export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
961 export LDFLAGS_vmlinux
962 # used by scripts/pacmage/Makefile
963 export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) arch Documentation include samples scripts tools)
964
965 vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN)
966
967 # Final link of vmlinux
968       cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux)
969 quiet_cmd_link-vmlinux = LINK    $@
970
971 # Include targets which we want to
972 # execute if the rest of the kernel build went well.
973 vmlinux: scripts/link-vmlinux.sh $(vmlinux-deps) FORCE
974 ifdef CONFIG_HEADERS_CHECK
975         $(Q)$(MAKE) -f $(srctree)/Makefile headers_check
976 endif
977 ifdef CONFIG_SAMPLES
978         $(Q)$(MAKE) $(build)=samples
979 endif
980 ifdef CONFIG_BUILD_DOCSRC
981         $(Q)$(MAKE) $(build)=Documentation
982 endif
983 ifdef CONFIG_GDB_SCRIPTS
984         $(Q)ln -fsn `cd $(srctree) && /bin/pwd`/scripts/gdb/vmlinux-gdb.py
985 endif
986         +$(call if_changed,link-vmlinux)
987
988 # The actual objects are generated when descending,
989 # make sure no implicit rule kicks in
990 $(sort $(vmlinux-deps)): $(vmlinux-dirs) ;
991
992 # Handle descending into subdirectories listed in $(vmlinux-dirs)
993 # Preset locale variables to speed up the build process. Limit locale
994 # tweaks to this spot to avoid wrong language settings when running
995 # make menuconfig etc.
996 # Error messages still appears in the original language
997
998 PHONY += $(vmlinux-dirs)
999 $(vmlinux-dirs): prepare scripts
1000         $(Q)$(MAKE) $(build)=$@
1001
1002 define filechk_kernel.release
1003         echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1004 endef
1005
1006 # Store (new) KERNELRELEASE string in include/config/kernel.release
1007 include/config/kernel.release: include/config/auto.conf FORCE
1008         $(call filechk,kernel.release)
1009
1010
1011 # Things we need to do before we recursively start building the kernel
1012 # or the modules are listed in "prepare".
1013 # A multi level approach is used. prepareN is processed before prepareN-1.
1014 # archprepare is used in arch Makefiles and when processed asm symlink,
1015 # version.h and scripts_basic is processed / created.
1016
1017 # Listed in dependency order
1018 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1019
1020 # prepare3 is used to check if we are building in a separate output directory,
1021 # and if so do:
1022 # 1) Check that make has not been executed in the kernel src $(srctree)
1023 prepare3: include/config/kernel.release
1024 ifneq ($(KBUILD_SRC),)
1025         @$(kecho) '  Using $(srctree) as source for kernel'
1026         $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
1027                 echo >&2 "  $(srctree) is not clean, please run 'make mrproper'"; \
1028                 echo >&2 "  in the '$(srctree)' directory.";\
1029                 /bin/false; \
1030         fi;
1031 endif
1032
1033 # prepare2 creates a makefile if using a separate output directory
1034 prepare2: prepare3 outputmakefile asm-generic
1035
1036 prepare1: prepare2 $(version_h) include/generated/utsrelease.h \
1037                    include/config/auto.conf
1038         $(cmd_crmodverdir)
1039
1040 archprepare: archheaders archscripts prepare1 scripts_basic
1041
1042 prepare0: archprepare
1043         $(Q)$(MAKE) $(build)=.
1044
1045 # All the preparing..
1046 prepare: prepare0
1047
1048 # Generate some files
1049 # ---------------------------------------------------------------------------
1050
1051 # KERNELRELEASE can change from a few different places, meaning version.h
1052 # needs to be updated, so this check is forced on all builds
1053
1054 uts_len := 64
1055 define filechk_utsrelease.h
1056         if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
1057           echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
1058           exit 1;                                                         \
1059         fi;                                                               \
1060         (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
1061 endef
1062
1063 define filechk_version.h
1064         (echo \#define LINUX_VERSION_CODE $(shell                         \
1065         expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
1066         echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
1067 endef
1068
1069 $(version_h): $(srctree)/Makefile FORCE
1070         $(call filechk,version.h)
1071         $(Q)rm -f $(old_version_h)
1072
1073 include/generated/utsrelease.h: include/config/kernel.release FORCE
1074         $(call filechk,utsrelease.h)
1075
1076 PHONY += headerdep
1077 headerdep:
1078         $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
1079         $(srctree)/scripts/headerdep.pl -I$(srctree)/include
1080
1081 # ---------------------------------------------------------------------------
1082 # Firmware install
1083 INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
1084 export INSTALL_FW_PATH
1085
1086 PHONY += firmware_install
1087 firmware_install:
1088         @mkdir -p $(objtree)/firmware
1089         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
1090
1091 # ---------------------------------------------------------------------------
1092 # Kernel headers
1093
1094 #Default location for installed headers
1095 export INSTALL_HDR_PATH = $(objtree)/usr
1096
1097 # If we do an all arch process set dst to asm-$(hdr-arch)
1098 hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
1099
1100 PHONY += archheaders
1101 archheaders:
1102
1103 PHONY += archscripts
1104 archscripts:
1105
1106 PHONY += __headers
1107 __headers: $(version_h) scripts_basic asm-generic archheaders archscripts
1108         $(Q)$(MAKE) $(build)=scripts build_unifdef
1109
1110 PHONY += headers_install_all
1111 headers_install_all:
1112         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
1113
1114 PHONY += headers_install
1115 headers_install: __headers
1116         $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \
1117           $(error Headers not exportable for the $(SRCARCH) architecture))
1118         $(Q)$(MAKE) $(hdr-inst)=include/uapi
1119         $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst)
1120
1121 PHONY += headers_check_all
1122 headers_check_all: headers_install_all
1123         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
1124
1125 PHONY += headers_check
1126 headers_check: headers_install
1127         $(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
1128         $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1
1129
1130 # ---------------------------------------------------------------------------
1131 # Kernel selftest
1132
1133 PHONY += kselftest
1134 kselftest:
1135         $(Q)$(MAKE) -C tools/testing/selftests run_tests
1136
1137 kselftest-clean:
1138         $(Q)$(MAKE) -C tools/testing/selftests clean
1139
1140 # ---------------------------------------------------------------------------
1141 # Modules
1142
1143 ifdef CONFIG_MODULES
1144
1145 # By default, build modules as well
1146
1147 all: modules
1148
1149 # Build modules
1150 #
1151 # A module can be listed more than once in obj-m resulting in
1152 # duplicate lines in modules.order files.  Those are removed
1153 # using awk while concatenating to the final file.
1154
1155 PHONY += modules
1156 modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
1157         $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
1158         @$(kecho) '  Building modules, stage 2.';
1159         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1160         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
1161
1162 modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
1163         $(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
1164
1165 %/modules.builtin: include/config/auto.conf
1166         $(Q)$(MAKE) $(modbuiltin)=$*
1167
1168
1169 # Target to prepare building external modules
1170 PHONY += modules_prepare
1171 modules_prepare: prepare scripts
1172
1173 # Target to install modules
1174 PHONY += modules_install
1175 modules_install: _modinst_ _modinst_post
1176
1177 PHONY += _modinst_
1178 _modinst_:
1179         @rm -rf $(MODLIB)/kernel
1180         @rm -f $(MODLIB)/source
1181         @mkdir -p $(MODLIB)/kernel
1182         @ln -s `cd $(srctree) && /bin/pwd` $(MODLIB)/source
1183         @if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
1184                 rm -f $(MODLIB)/build ; \
1185                 ln -s $(CURDIR) $(MODLIB)/build ; \
1186         fi
1187         @cp -f $(objtree)/modules.order $(MODLIB)/
1188         @cp -f $(objtree)/modules.builtin $(MODLIB)/
1189         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1190
1191 # This depmod is only for convenience to give the initial
1192 # boot a modules.dep even before / is mounted read-write.  However the
1193 # boot script depmod is the master version.
1194 PHONY += _modinst_post
1195 _modinst_post: _modinst_
1196         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
1197         $(call cmd,depmod)
1198
1199 ifeq ($(CONFIG_MODULE_SIG), y)
1200 PHONY += modules_sign
1201 modules_sign:
1202         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign
1203 endif
1204
1205 else # CONFIG_MODULES
1206
1207 # Modules not configured
1208 # ---------------------------------------------------------------------------
1209
1210 modules modules_install: FORCE
1211         @echo >&2
1212         @echo >&2 "The present kernel configuration has modules disabled."
1213         @echo >&2 "Type 'make config' and enable loadable module support."
1214         @echo >&2 "Then build a kernel with module support enabled."
1215         @echo >&2
1216         @exit 1
1217
1218 endif # CONFIG_MODULES
1219
1220 ###
1221 # Cleaning is done on three levels.
1222 # make clean     Delete most generated files
1223 #                Leave enough to build external modules
1224 # make mrproper  Delete the current configuration, and all generated files
1225 # make distclean Remove editor backup files, patch leftover files and the like
1226
1227 # Directories & files removed with 'make clean'
1228 CLEAN_DIRS  += $(MODVERDIR)
1229
1230 # Directories & files removed with 'make mrproper'
1231 MRPROPER_DIRS  += include/config usr/include include/generated          \
1232                   arch/*/include/generated .tmp_objdiff
1233 MRPROPER_FILES += .config .config.old .version .old_version \
1234                   Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
1235                   signing_key.pem signing_key.priv signing_key.x509     \
1236                   x509.genkey extra_certificates signing_key.x509.keyid \
1237                   signing_key.x509.signer vmlinux-gdb.py
1238
1239 # clean - Delete most, but leave enough to build external modules
1240 #
1241 clean: rm-dirs  := $(CLEAN_DIRS)
1242 clean: rm-files := $(CLEAN_FILES)
1243 clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation samples)
1244
1245 PHONY += $(clean-dirs) clean archclean vmlinuxclean
1246 $(clean-dirs):
1247         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1248
1249 vmlinuxclean:
1250         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
1251
1252 clean: archclean vmlinuxclean
1253
1254 # mrproper - Delete all generated files, including .config
1255 #
1256 mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
1257 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1258 mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
1259
1260 PHONY += $(mrproper-dirs) mrproper archmrproper
1261 $(mrproper-dirs):
1262         $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1263
1264 mrproper: clean archmrproper $(mrproper-dirs)
1265         $(call cmd,rmdirs)
1266         $(call cmd,rmfiles)
1267
1268 # distclean
1269 #
1270 PHONY += distclean
1271
1272 distclean: mrproper
1273         @find $(srctree) $(RCS_FIND_IGNORE) \
1274                 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1275                 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1276                 -o -name '.*.rej' -o -name '*%'  -o -name 'core' \) \
1277                 -type f -print | xargs rm -f
1278
1279
1280 # Packaging of the kernel to various formats
1281 # ---------------------------------------------------------------------------
1282 # rpm target kept for backward compatibility
1283 package-dir     := scripts/package
1284
1285 %src-pkg: FORCE
1286         $(Q)$(MAKE) $(build)=$(package-dir) $@
1287 %pkg: include/config/kernel.release FORCE
1288         $(Q)$(MAKE) $(build)=$(package-dir) $@
1289 rpm: include/config/kernel.release FORCE
1290         $(Q)$(MAKE) $(build)=$(package-dir) $@
1291
1292
1293 # Brief documentation of the typical targets used
1294 # ---------------------------------------------------------------------------
1295
1296 boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
1297 boards := $(sort $(notdir $(boards)))
1298 board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
1299 board-dirs := $(sort $(notdir $(board-dirs:/=)))
1300
1301 help:
1302         @echo  'Cleaning targets:'
1303         @echo  '  clean           - Remove most generated files but keep the config and'
1304         @echo  '                    enough build support to build external modules'
1305         @echo  '  mrproper        - Remove all generated files + config + various backup files'
1306         @echo  '  distclean       - mrproper + remove editor backup and patch files'
1307         @echo  ''
1308         @echo  'Configuration targets:'
1309         @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1310         @echo  ''
1311         @echo  'Other generic targets:'
1312         @echo  '  all             - Build all targets marked with [*]'
1313         @echo  '* vmlinux         - Build the bare kernel'
1314         @echo  '* modules         - Build all modules'
1315         @echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1316         @echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
1317         @echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
1318         @echo  '  dir/            - Build all files in dir and below'
1319         @echo  '  dir/file.[ois]  - Build specified target only'
1320         @echo  '  dir/file.ll     - Build the LLVM assembly file'
1321         @echo  '                    (requires compiler support for LLVM assembly generation)'
1322         @echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
1323         @echo  '                    (requires a recent binutils and recent build (System.map))'
1324         @echo  '  dir/file.ko     - Build module including final link'
1325         @echo  '  modules_prepare - Set up for building external modules'
1326         @echo  '  tags/TAGS       - Generate tags file for editors'
1327         @echo  '  cscope          - Generate cscope index'
1328         @echo  '  gtags           - Generate GNU GLOBAL index'
1329         @echo  '  kernelrelease   - Output the release version string (use with make -s)'
1330         @echo  '  kernelversion   - Output the version stored in Makefile (use with make -s)'
1331         @echo  '  image_name      - Output the image name (use with make -s)'
1332         @echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1333          echo  '                    (default: $(INSTALL_HDR_PATH))'; \
1334          echo  ''
1335         @echo  'Static analysers'
1336         @echo  '  checkstack      - Generate a list of stack hogs'
1337         @echo  '  namespacecheck  - Name space analysis on compiled kernel'
1338         @echo  '  versioncheck    - Sanity check on version.h usage'
1339         @echo  '  includecheck    - Check for duplicate included header files'
1340         @echo  '  export_report   - List the usages of all exported symbols'
1341         @echo  '  headers_check   - Sanity check on exported headers'
1342         @echo  '  headerdep       - Detect inclusion cycles in headers'
1343         @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
1344         @echo  ''
1345         @echo  'Kernel selftest'
1346         @echo  '  kselftest       - Build and run kernel selftest (run as root)'
1347         @echo  '                    Build, install, and boot kernel before'
1348         @echo  '                    running kselftest on it'
1349         @echo  '  kselftest-clean - Remove all generated kselftest files'
1350         @echo  ''
1351         @echo  'Kernel packaging:'
1352         @$(MAKE) $(build)=$(package-dir) help
1353         @echo  ''
1354         @echo  'Documentation targets:'
1355         @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
1356         @echo  ''
1357         @echo  'Architecture specific targets ($(SRCARCH)):'
1358         @$(if $(archhelp),$(archhelp),\
1359                 echo '  No architecture specific help defined for $(SRCARCH)')
1360         @echo  ''
1361         @$(if $(boards), \
1362                 $(foreach b, $(boards), \
1363                 printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
1364                 echo '')
1365         @$(if $(board-dirs), \
1366                 $(foreach b, $(board-dirs), \
1367                 printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
1368                 printf "  %-16s - Show all of the above\\n" help-boards; \
1369                 echo '')
1370
1371         @echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1372         @echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
1373         @echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1374         @echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
1375         @echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1376         @echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1377         @echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
1378         @echo  '                1: warnings which may be relevant and do not occur too often'
1379         @echo  '                2: warnings which occur quite often but may still be relevant'
1380         @echo  '                3: more obscure warnings, can most likely be ignored'
1381         @echo  '                Multiple levels can be combined with W=12 or W=123'
1382         @echo  ''
1383         @echo  'Execute "make" or "make all" to build all targets marked with [*] '
1384         @echo  'For further info see the ./README file'
1385
1386
1387 help-board-dirs := $(addprefix help-,$(board-dirs))
1388
1389 help-boards: $(help-board-dirs)
1390
1391 boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig)))
1392
1393 $(help-board-dirs): help-%:
1394         @echo  'Architecture specific targets ($(SRCARCH) $*):'
1395         @$(if $(boards-per-dir), \
1396                 $(foreach b, $(boards-per-dir), \
1397                 printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
1398                 echo '')
1399
1400
1401 # Documentation targets
1402 # ---------------------------------------------------------------------------
1403 %docs: scripts_basic FORCE
1404         $(Q)$(MAKE) $(build)=scripts build_docproc build_check-lc_ctype
1405         $(Q)$(MAKE) $(build)=Documentation/DocBook $@
1406
1407 else # KBUILD_EXTMOD
1408
1409 ###
1410 # External module support.
1411 # When building external modules the kernel used as basis is considered
1412 # read-only, and no consistency checks are made and the make
1413 # system is not used on the basis kernel. If updates are required
1414 # in the basis kernel ordinary make commands (without M=...) must
1415 # be used.
1416 #
1417 # The following are the only valid targets when building external
1418 # modules.
1419 # make M=dir clean     Delete all automatically generated files
1420 # make M=dir modules   Make all modules in specified dir
1421 # make M=dir           Same as 'make M=dir modules'
1422 # make M=dir modules_install
1423 #                      Install the modules built in the module directory
1424 #                      Assumes install directory is already created
1425
1426 # We are always building modules
1427 KBUILD_MODULES := 1
1428 PHONY += crmodverdir
1429 crmodverdir:
1430         $(cmd_crmodverdir)
1431
1432 PHONY += $(objtree)/Module.symvers
1433 $(objtree)/Module.symvers:
1434         @test -e $(objtree)/Module.symvers || ( \
1435         echo; \
1436         echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
1437         echo "           is missing; modules will have no dependencies and modversions."; \
1438         echo )
1439
1440 module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
1441 PHONY += $(module-dirs) modules
1442 $(module-dirs): crmodverdir $(objtree)/Module.symvers
1443         $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
1444
1445 modules: $(module-dirs)
1446         @$(kecho) '  Building modules, stage 2.';
1447         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1448
1449 PHONY += modules_install
1450 modules_install: _emodinst_ _emodinst_post
1451
1452 install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
1453 PHONY += _emodinst_
1454 _emodinst_:
1455         $(Q)mkdir -p $(MODLIB)/$(install-dir)
1456         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1457
1458 PHONY += _emodinst_post
1459 _emodinst_post: _emodinst_
1460         $(call cmd,depmod)
1461
1462 clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
1463
1464 PHONY += $(clean-dirs) clean
1465 $(clean-dirs):
1466         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1467
1468 clean:  rm-dirs := $(MODVERDIR)
1469 clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
1470
1471 help:
1472         @echo  '  Building external modules.'
1473         @echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
1474         @echo  ''
1475         @echo  '  modules         - default target, build the module(s)'
1476         @echo  '  modules_install - install the module'
1477         @echo  '  clean           - remove generated files in module directory only'
1478         @echo  ''
1479
1480 # Dummies...
1481 PHONY += prepare scripts
1482 prepare: ;
1483 scripts: ;
1484 endif # KBUILD_EXTMOD
1485
1486 clean: $(clean-dirs)
1487         $(call cmd,rmdirs)
1488         $(call cmd,rmfiles)
1489         @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1490                 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1491                 -o -name '*.ko.*' \
1492                 -o -name '*.dwo'  \
1493                 -o -name '*.su'  \
1494                 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1495                 -o -name '*.symtypes' -o -name 'modules.order' \
1496                 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1497                 -o -name '*.ll' \
1498                 -o -name '*.gcno' \) -type f -print | xargs rm -f
1499
1500 # Generate tags for editors
1501 # ---------------------------------------------------------------------------
1502 quiet_cmd_tags = GEN     $@
1503       cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
1504
1505 tags TAGS cscope gtags: FORCE
1506         $(call cmd,tags)
1507
1508 # Scripts to check various things for consistency
1509 # ---------------------------------------------------------------------------
1510
1511 PHONY += includecheck versioncheck coccicheck namespacecheck export_report
1512
1513 includecheck:
1514         find $(srctree)/* $(RCS_FIND_IGNORE) \
1515                 -name '*.[hcS]' -type f -print | sort \
1516                 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
1517
1518 versioncheck:
1519         find $(srctree)/* $(RCS_FIND_IGNORE) \
1520                 -name '*.[hcS]' -type f -print | sort \
1521                 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
1522
1523 coccicheck:
1524         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
1525
1526 namespacecheck:
1527         $(PERL) $(srctree)/scripts/namespace.pl
1528
1529 export_report:
1530         $(PERL) $(srctree)/scripts/export_report.pl
1531
1532 endif #ifeq ($(config-targets),1)
1533 endif #ifeq ($(mixed-targets),1)
1534
1535 PHONY += checkstack kernelrelease kernelversion image_name
1536
1537 # UML needs a little special treatment here.  It wants to use the host
1538 # toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
1539 # else wants $(ARCH), including people doing cross-builds, which means
1540 # that $(SUBARCH) doesn't work here.
1541 ifeq ($(ARCH), um)
1542 CHECKSTACK_ARCH := $(SUBARCH)
1543 else
1544 CHECKSTACK_ARCH := $(ARCH)
1545 endif
1546 checkstack:
1547         $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
1548         $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
1549
1550 kernelrelease:
1551         @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1552
1553 kernelversion:
1554         @echo $(KERNELVERSION)
1555
1556 image_name:
1557         @echo $(KBUILD_IMAGE)
1558
1559 # Clear a bunch of variables before executing the submake
1560 tools/: FORCE
1561         $(Q)mkdir -p $(objtree)/tools
1562         $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(shell cd $(objtree) && /bin/pwd) subdir=tools -C $(src)/tools/
1563
1564 tools/%: FORCE
1565         $(Q)mkdir -p $(objtree)/tools
1566         $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(shell cd $(objtree) && /bin/pwd) subdir=tools -C $(src)/tools/ $*
1567
1568 # Single targets
1569 # ---------------------------------------------------------------------------
1570 # Single targets are compatible with:
1571 # - build with mixed source and output
1572 # - build with separate output dir 'make O=...'
1573 # - external modules
1574 #
1575 #  target-dir => where to store outputfile
1576 #  build-dir  => directory in kernel source tree to use
1577
1578 ifeq ($(KBUILD_EXTMOD),)
1579         build-dir  = $(patsubst %/,%,$(dir $@))
1580         target-dir = $(dir $@)
1581 else
1582         zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1583         build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1584         target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1585 endif
1586
1587 %.s: %.c prepare scripts FORCE
1588         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1589 %.i: %.c prepare scripts FORCE
1590         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1591 %.o: %.c prepare scripts FORCE
1592         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1593 %.lst: %.c prepare scripts FORCE
1594         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1595 %.s: %.S prepare scripts FORCE
1596         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1597 %.o: %.S prepare scripts FORCE
1598         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1599 %.symtypes: %.c prepare scripts FORCE
1600         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1601 %.ll: %.c prepare scripts FORCE
1602         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1603
1604 # Modules
1605 /: prepare scripts FORCE
1606         $(cmd_crmodverdir)
1607         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1608         $(build)=$(build-dir)
1609 # Make sure the latest headers are built for Documentation
1610 Documentation/: headers_install
1611 %/: prepare scripts FORCE
1612         $(cmd_crmodverdir)
1613         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1614         $(build)=$(build-dir)
1615 %.ko: prepare scripts FORCE
1616         $(cmd_crmodverdir)
1617         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
1618         $(build)=$(build-dir) $(@:.ko=.o)
1619         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1620
1621 # FIXME Should go into a make.lib or something
1622 # ===========================================================================
1623
1624 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
1625       cmd_rmdirs = rm -rf $(rm-dirs)
1626
1627 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
1628       cmd_rmfiles = rm -f $(rm-files)
1629
1630 # Run depmod only if we have System.map and depmod is executable
1631 quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
1632       cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
1633                    $(KERNELRELEASE) "$(patsubst y,_,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))"
1634
1635 # Create temporary dir for module support files
1636 # clean it up only when building all modules
1637 cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
1638                   $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
1639
1640 # read all saved command lines
1641
1642 targets := $(wildcard $(sort $(targets)))
1643 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1644
1645 ifneq ($(cmd_files),)
1646   $(cmd_files): ;       # Do not try to update included dependency files
1647   include $(cmd_files)
1648 endif
1649
1650 endif   # skip-makefile
1651
1652 PHONY += FORCE
1653 FORCE:
1654
1655 # Declare the contents of the .PHONY variable as phony.  We keep that
1656 # information in a variable so we can use it in if_changed and friends.
1657 .PHONY: $(PHONY)