3 # Copyright (C) 2000-2008 Erik Andersen <andersen@uclibc.org>
5 # Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
8 #--------------------------------------------------------------
9 # You shouldn't need to mess with anything beyond this point...
10 #--------------------------------------------------------------
11 clean_targets := clean realclean distclean \
12 objclean-y headers_clean-y CLEAN_utils
13 noconfig_targets := menuconfig config oldconfig silentoldconfig randconfig \
14 defconfig allyesconfig allnoconfig \
15 release dist tags help
17 include $(top_srcdir)Rules.mak
18 sub_headers := headers
20 KCONFIG_CONFIG := $(top_builddir).config
24 ifeq ($(HAVE_DOT_CONFIG),y)
29 # In this section, we need .config
30 -include $(top_builddir).config.cmd
32 else # ifeq ($(HAVE_DOT_CONFIG),y)
37 @echo "Need to make a config file first, run: make menuconfig"
40 endif # ifeq ($(HAVE_DOT_CONFIG),y)
42 include $(top_srcdir)ldso/Makefile.in
43 include $(top_srcdir)libcrypt/Makefile.in
44 include $(top_srcdir)libintl/Makefile.in
45 include $(top_srcdir)libm/Makefile.in
46 include $(top_srcdir)libnsl/Makefile.in
47 include $(top_srcdir)libresolv/Makefile.in
48 include $(top_srcdir)libutil/Makefile.in
49 include $(top_srcdir)libpthread/Makefile.in
50 include $(top_srcdir)librt/Makefile.in
51 include $(top_srcdir)libubacktrace/Makefile.in
52 include $(top_srcdir)extra/locale/Makefile.in
54 # last included to catch all the objects added by others (locales/threads)
55 include $(top_srcdir)libc/Makefile.in
57 conf := $(top_builddir)extra/config/conf
58 mconf := $(top_builddir)extra/config/mconf
60 ifeq ($(HAVE_DOT_CONFIG),y)
61 # If the .config changes then we have to make sure that our includes are
62 # updated properly. This would normally work by saying that the headers
63 # have uClibc_config.h as prerequisite but since we _symlink_ the headers
64 # and do not (?) want to rely on 'make -L' we better update them right here,
65 # on spot to save us from alot of hazzle.
66 $(top_builddir)include/bits/uClibc_config.h: $(conf) $(KCONFIG_CONFIG) $(top_srcdir)extra/scripts/conf-header.sh | $(top_builddir)include/bits $(top_builddir)include/config
68 $(Q)@$< -s $(top_srcdir)extra/Configs/Config.in
69 $(Q)$(top_srcdir)extra/scripts/conf-header.sh $(KCONFIG_CONFIG) > $@
72 # The above doesn't work for threads, though. Just using check-symlinks for now.
73 # XXX: FIXME: this is ugly
76 $(top_builddir)include/config/linuxthreads/old.h $(top_builddir)include/config/linuxthreads/new.h:
79 # For the moment, we have to keep re-running this target
80 # because the fix includes scripts rely on pre-processers
81 # in order to generate the headers correctly :(. That
82 # means we can't use the $(HOSTCC) in order to get the
84 ifeq ($(ARCH_USE_MMU),y)
85 export header_extra_args =
87 export header_extra_args = -n
89 HEADERS_BITS_COMMON := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/common/bits/*.h))
90 HEADERS_BITS_ARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/*.h))
91 HEADERS_BITS_SUBARCH :=
92 ifneq ($(TARGET_SUBARCH),)
93 HEADERS_BITS_SUBARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(TARGET_SUBARCH)/*.h))
95 ifneq ($(HEADERS_BITS_PTHREAD),)
96 HEADERS_BITS_ARCH := $(filter-out $(HEADERS_BITS_PTHREAD),$(HEADERS_BITS_ARCH))
97 HEADERS_BITS_SUBARCH:= $(filter-out $(HEADERS_BITS_PTHREAD),$(HEADERS_BITS_SUBARCH))
99 HEADERS_BITS_COMMON := $(filter-out $(HEADERS_BITS_ARCH) $(HEADERS_BITS_SUBARCH) $(HEADERS_BITS_PTHREAD),$(HEADERS_BITS_COMMON))
101 HEADERS_SYS_COMMON := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/common/sys/*.h))
102 HEADERS_SYS_ARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/sys/*.h))
103 HEADERS_SYS_COMMON := $(filter-out $(HEADERS_SYS_ARCH),$(HEADERS_SYS_COMMON))
105 ALL_HEADERS_COMMON := $(top_builddir)include/fpu_control.h \
106 $(top_builddir)include/jmpbuf-offsets.h \
107 $(top_builddir)include/jmpbuf-unwind.h \
108 $(top_builddir)include/dl-osinfo.h \
109 $(top_builddir)include/hp-timing.h
110 ALL_HEADERS_BITS_COMMON := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_COMMON))
111 ALL_HEADERS_BITS_ARCH := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_ARCH))
112 ifneq ($(TARGET_SUBARCH),)
113 ALL_HEADERS_BITS_SUBARCH := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_SUBARCH))
115 ALL_HEADERS_BITS_SUBARCH :=
117 ALL_HEADERS_SYS_COMMON := $(addprefix $(top_builddir)include/sys/,$(HEADERS_SYS_COMMON))
118 ALL_HEADERS_SYS_ARCH := $(addprefix $(top_builddir)include/sys/,$(HEADERS_SYS_ARCH))
120 target-headers-sysdep := \
121 $(ALL_HEADERS_COMMON) \
122 $(ALL_HEADERS_BITS_COMMON) \
123 $(ALL_HEADERS_BITS_ARCH) \
124 $(ALL_HEADERS_BITS_SUBARCH) \
125 $(ALL_HEADERS_SYS_COMMON) \
126 $(ALL_HEADERS_SYS_ARCH) \
127 $(ALL_HEADERS_BITS_PTHREAD)
129 $(top_builddir)include/fpu_control.h $(top_builddir)include/jmpbuf-offsets.h $(top_builddir)include/jmpbuf-unwind.h:
131 $(Q)[ -r $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/$(@F) ] && \
132 $(LN) -fs $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/$(@F) $@ || \
133 $(LN) -fs $(call rel_srcdir)libc/sysdeps/linux/common/$(@F) $@
135 $(top_builddir)include/dl-osinfo.h $(top_builddir)include/hp-timing.h:
136 $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/$(@F) $@
138 $(ALL_HEADERS_BITS_COMMON):
139 $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/bits/$(@F) $@
141 $(ALL_HEADERS_BITS_ARCH):
142 $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(@F) $@
144 ifneq ($(TARGET_SUBARCH),)
145 $(ALL_HEADERS_BITS_SUBARCH):
146 $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(TARGET_SUBARCH)/$(@F) $@
149 ifneq ($(strip $(ALL_HEADERS_SYS_COMMON)),)
150 $(ALL_HEADERS_SYS_COMMON):
151 $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/sys/$(@F) $@
154 ifneq ($(strip $(ALL_HEADERS_SYS_ARCH)),)
155 $(ALL_HEADERS_SYS_ARCH):
156 $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/sys/$(@F) $@
159 $(target-headers-sysdep) $(pregen-headers-y): | $(top_builddir)include/bits $(top_builddir)include/sys
162 $(do_rm) $(ALL_HEADERS_COMMON)
163 headers_clean-y += HEADERCLEAN_common
165 # The headers. Arch specific headers are specified via ARCH_HEADERS in
166 # libc/sysdeps/linux/$(TARGET_ARCH)/Makefile.arch which appends those via
167 # libc/sysdeps/linux/Makefile.commonarch to headers-y
168 headers-y += $(target-headers-sysdep)
170 headers: $(top_builddir)include/bits/uClibc_config.h | subdirs
171 subdirs: $(addprefix $(top_builddir),$(subdirs))
172 pregen-headers: $(top_builddir)include/bits/sysnum.h $(pregen-headers-y)
173 pregen: headers pregen-headers
174 $(Q)$(if $(UCLIBC_HAS_LOCALE),$(MAKE) -C extra/locale locale_headers)
176 $(top_builddir)include/bits/sysnum.h: $(top_srcdir)extra/scripts/gen_bits_syscall_h.sh | $(top_builddir)include/bits
179 tmp=`mktemp $(top_builddir)include/bits/sysnum.h.XXXXXX 2>/dev/null || true`; \
180 [ -z "$$tmp" ] && tmp='$(top_builddir)include/bits/sysnum.h.new'; \
181 KERNEL_HEADERS="${KERNEL_HEADERS}" top_builddir="$(top_builddir)" CC="$(CC) $(CPU_CFLAGS)" $(SHELL) $< > $$tmp; \
182 if cmp $(top_builddir)include/bits/sysnum.h $$tmp >/dev/null 2>&1; then \
185 mv -f $$tmp $(top_builddir)include/bits/sysnum.h; \
187 @# Ugly linux specific hack..
188 $(Q)if grep -q __NR_ $@; then true; else \
190 echo "ERROR: Could not generate syscalls."; \
191 echo "Make sure that you have proper kernel headers."; \
192 echo "Your .config in KERNEL_HEADERS=\"\" was set to:"; \
193 echo "${KERNEL_HEADERS}"; \
197 .PHONY: $(LOCAL_INSTALL_PATH)
198 $(LOCAL_INSTALL_PATH):
199 $(Q)$(MAKE) PREFIX=$(shell pwd)/$(LOCAL_INSTALL_PATH) RUNTIME_PREFIX=/ \
204 install: install_runtime install_dev
207 RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB=$(shell $(top_srcdir)extra/scripts/relative_path.sh $(DEVEL_PREFIX)$(MULTILIB_DIR) $(RUNTIME_PREFIX)$(MULTILIB_DIR))
211 $(top_builddir)extra/scripts/unifdef: |$(top_builddir)extra/scripts
212 $(top_builddir)extra/scripts/unifdef: $(top_srcdir)extra/scripts/unifdef.c
215 # Installs header files.
216 # a "y" here means the feature is enabled and so we should *not* rm it.
217 # if the option expands to nothing though, we can punt the headers.
226 bits/uClibc_arch_features.h \
227 bits/kernel_sigaction.h \
229 bits/kernel_types.h \
233 bits/syscalls-common.h \
234 bits/uClibc_fpmax.h \
235 bits/uClibc_mutex.h \
236 bits/uClibc_pthread.h \
237 bits/uClibc_uintmaxtostr.h \
238 bits/uClibc_uwchar.h \
239 bits/uClibc_va_copy.h \
240 bits/sigcontextinfo.h \
246 ifeq ($(UCLIBC_STRICT_HEADERS),y)
247 HEADERS_RM- += sgtty.h
249 HEADERS_RM-$(HAVE_SHARED) += dlfcn.h bits/dlfcn.h
250 HEADERS_RM-$(PTHREADS_DEBUG_SUPPORT) += thread_db.h
251 HEADERS_RM-$(UCLIBC_HAS_BSD_ERR) += err.h
252 HEADERS_RM-$(UCLIBC_HAS_CRYPT) += crypt.h
253 HEADERS_RM-$(UCLIBC_HAS_EPOLL) += sys/epoll.h
254 HEADERS_RM-$(UCLIBC_HAS_FENV) += fenv.h bits/fenv.h bits/fenvinline.h
255 HEADERS_RM-$(UCLIBC_HAS_FLOATS) += complex.h fpu_control.h ieee754.h \
259 HEADERS_RM-$(findstring y,$(UCLIBC_HAS_FTW)$(UCLIBC_HAS_NFTW)) += ftw.h
260 HEADERS_RM-$(UCLIBC_HAS_FTS) += fts.h
261 HEADERS_RM-$(UCLIBC_HAS_GETTEXT_AWARENESS) += libintl.h
262 HEADERS_RM-$(UCLIBC_HAS_GLIBC_CUSTOM_PRINTF) += printf.h
263 HEADERS_RM-$(UCLIBC_HAS_GLOB) += glob.h
264 HEADERS_RM-$(UCLIBC_HAS_GNU_ERROR) += error.h
265 HEADERS_RM-$(UCLIBC_HAS_GNU_GETOPT)$(UCLIBC_HAS_GETOPT_LONG) += getopt.h
266 HEADERS_RM-$(UCLIBC_HAS_IPV6) += netinet/ip6.h netinet/icmp6.h
267 HEADERS_RM-$(UCLIBC_HAS_BACKTRACE) += execinfo.h
268 HEADERS_RM-$(UCLIBC_HAS_LOCALE) += iconv.h bits/uClibc_ctype.h
269 HEADERS_RM-$(UCLIBC_HAS_PTY) += pty.h
270 HEADERS_RM-$(UCLIBC_HAS_REALTIME) += mqueue.h bits/mqueue.h sched.h \
273 HEADERS_RM-$(UCLIBC_HAS_REGEX) += regex.h regexp.h
274 HEADERS_RM-$(UCLIBC_HAS_RPC) += rpc
275 HEADERS_RM-$(UCLIBC_HAS_SHADOW) += shadow.h
276 HEADERS_RM-$(UCLIBC_HAS_SOCKET) += sys/socket.h bits/socket.h sys/socketvar.h
277 HEADERS_RM-$(UCLIBC_HAS_SYSLOG) += syslog.h sys/syslog.h bits/syslog*.h
278 HEADERS_RM-$(UCLIBC_HAS_THREADS) += *thread*.h semaphore.h \
281 HEADERS_RM-$(UCLIBC_HAS_THREADS_NATIVE) += atomic.h bits/atomic.h
282 HEADERS_RM-$(UCLIBC_HAS_UTMPX) += bits/utmpx.h utmpx.h
283 HEADERS_RM-$(UCLIBC_HAS_WCHAR) += wchar.h wctype.h
284 HEADERS_RM-$(UCLIBC_HAS_WORDEXP) += wordexp.h
285 HEADERS_RM-$(UCLIBC_HAS_XATTR) += sys/xattr.h
286 HEADERS_RM-$(UCLIBC_HAS_XLOCALE) += xlocale.h
287 HEADERS_RM-$(UCLIBC_LINUX_SPECIFIC) += sys/eventfd.h sys/fsuid.h \
306 HEADERS_RM-$(UCLIBC_SUPPORT_AI_ADDRCONFIG) += ifaddrs.h
307 HEADERS_RM-$(UCLIBC_SV4_DEPRECATED) += ustat.h sys/ustat.h bits/ustat.h
308 HEADERS_RM-$(UCLIBC_SUSV3_LEGACY) += sys/timeb.h regexp.h
309 HEADERS_RM-$(UCLIBC_SUSV4_LEGACY) += utime.h ucontext.h
310 HEADERS_RM-$(UCLIBC_HAS_ADVANCED_REALTIME) += spawn.h
312 ifneq ($(findstring install,$(MAKECMDGOALS)),)
313 $(addprefix $(PREFIX)$(DEVEL_PREFIX),include $(MULTILIB_DIR)):
315 # avoid warning about duplicate targets in rule or overrides
316 ifneq ($(abspath $(RUNTIME_PREFIX)$(MULTILIB_DIR)),$(abspath $(DEVEL_PREFIX)$(MULTILIB_DIR)))
317 $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR):
321 install_headers: headers $(top_builddir)extra/scripts/unifdef | $(PREFIX)$(DEVEL_PREFIX)include
322 @$(call disp_install,"include -> $(PREFIX)$(DEVEL_PREFIX)include")
323 $(Q)top_builddir=$(top_builddir) \
324 $(top_srcdir)extra/scripts/install_headers.sh \
325 include $(PREFIX)$(DEVEL_PREFIX)include
326 ifneq ($(O),) # only run this step in O is set i.e. make O=/my/builddir/ ..
327 @$(call disp_install,"$(top_builddir)/include -> $(PREFIX)$(DEVEL_PREFIX)include")
328 $(Q)top_builddir=$(top_builddir) \
329 $(top_srcdir)extra/scripts/install_headers.sh \
330 $(top_builddir)/include $(PREFIX)$(DEVEL_PREFIX)include
332 $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && $(RM) -r $(HEADERS_RM-)
333 ifeq ($(UCLIBC_HAS_WCHAR),)
334 $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && mv -f wchar-stub.h wchar.h
336 $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && $(RM) -f wchar-stub.h
339 # Installs startfiles
340 install_startfiles: startfiles | $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)
341 -$(INSTALL) -m 644 $(startfiles) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/
343 # Installs development library links.
344 install_dev: install_headers install_runtime install_startfiles | $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)
345 -$(INSTALL) -m 644 $(top_builddir)lib/*.a $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/
346 ifeq ($(HAVE_SHARED),y)
347 for i in `cd $(top_builddir) && find lib/ -type l -name 'lib[a-zA-Z]*.so' | \
348 $(SED) -e 's/lib\///'` ; do \
349 $(LN) -sf $(RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB)$$i.$(ABI_VERSION) \
350 $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/$$i; \
352 ifeq ($(HARDWIRED_ABSPATH),y)
353 if [ -f $(top_builddir)lib/libc.so -a -f $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME) ] ; then \
354 $(RM) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \
355 $(SED) -e 's:$(NONSHARED_LIBNAME):$(DEVEL_PREFIX)$(MULTILIB_DIR)/$(NONSHARED_LIBNAME):' \
356 -e 's:$(SHARED_LIBNAME):$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME):' \
357 -e 's:$(UCLIBC_LDSO):$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(UCLIBC_LDSO):' \
358 -e 's:$(UBACKTRACE_DSO):$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(UBACKTRACE_DSO):' \
359 $(top_builddir)lib/libc.so > $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \
360 $(SED) -i -e 's://:/:g' $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \
363 -$(INSTALL) -m 755 $(top_builddir)lib/libc.so $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/
365 ifeq ($(UCLIBC_HAS_THREADS),y)
366 ifneq ($(LINUXTHREADS_OLD),y)
367 ifeq ($(HARDWIRED_ABSPATH),y)
368 if [ -f $(top_builddir)lib/libpthread.so -a -f $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)/libpthread.so.$(ABI_VERSION) ] ; then \
369 $(RM) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \
370 cp $(top_srcdir)extra/scripts/format.lds $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \
371 echo "GROUP ( $(RUNTIME_PREFIX)$(MULTILIB_DIR)/libpthread.so.$(ABI_VERSION) $(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread_nonshared.a )" \
372 >> $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \
373 $(SED) -i -e 's://:/:g' $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \
376 -$(INSTALL) -m 755 $(top_builddir)lib/libpthread.so $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/
380 ifeq ($(PTHREADS_DEBUG_SUPPORT),y)
381 $(LN) -sf $(RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB)libthread_db.so.1 \
382 $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libthread_db.so
385 # # If we build shared libraries then the static libs are PIC...
386 # # Make _pic.a symlinks to make mklibs.py and similar tools happy.
387 if [ -d $(top_builddir)lib ] ; then \
388 for i in `cd $(top_builddir) && find lib/ -type f -name 'lib*.a' | $(SED) -e 's/lib\///'` ; do \
389 $(LN) -sf $$i $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/`echo $$i \
390 | $(SED) -e 's/\.a$$/_pic.a/'`; \
395 ifeq ($(UCLIBC_FORMAT_SHARED_FLAT),y)
396 for file in $(top_builddir)lib/lib*.gdb; do \
397 if test -f $$file; then \
398 $(INSTALL) -m 755 $$file $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR); \
399 $(INSTALL) -m 755 `echo $$file | $(SED) 's/\.gdb$$//'` \
400 $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR); \
405 # Installs run-time libraries
406 install_runtime: all | $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)
407 ifeq ($(HAVE_SHARED),y)
408 $(INSTALL) -m 755 $(top_builddir)lib/lib*-$(VERSION).so \
409 $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)
410 (cd $(top_builddir)lib && $(TAR) --exclude=$(UCLIBC_LDSO_NAME).so.lds -cf - *.so.*) \
411 | $(TAR) -xf - -C $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)
412 @if [ -x $(top_builddir)lib/$(UCLIBC_LDSO_NAME)-$(VERSION).so ] ; then \
415 $(INSTALL) -m 755 $(top_builddir)lib/$(UCLIBC_LDSO_NAME)-$(VERSION).so \
416 $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR); \
421 $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" -C utils $@
423 # Installs helper applications, such as 'ldd' and 'ldconfig'
425 $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" -C utils utils_install
427 endif # ifeq ($(HAVE_DOT_CONFIG),y)
430 $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils $@
432 install_hostutils: hostutils
433 $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils utils_install
435 $(addprefix $(top_builddir),include include/bits include/sys include/config lib extra/config/lxdialog extra/locale extra/scripts $(subdirs)):
439 # ---------------------------------------------------------------------------
440 $(conf) $(mconf): | $(top_builddir)include/config $(top_builddir)extra/config/lxdialog
441 $(Q)$(MAKE) -C extra/config $(@F)
443 arch-defconfigs := $(notdir $(wildcard $(top_srcdir)extra/Configs/defconfigs/$(ARCH)/*_defconfig))
446 $(Q)$< extra/Configs/Config.in
449 $(Q)$< extra/Configs/Config.in
452 $(Q)$< -o extra/Configs/Config.in
454 silentoldconfig: $(conf)
455 $(Q)$< -s extra/Configs/Config.in
458 $(Q)$< -r extra/Configs/Config.in
460 allyesconfig: $(conf)
461 $(Q)$< -y extra/Configs/Config.in
462 $(SED) -i -e "s/^DODEBUG=.*/# DODEBUG is not set/" \
463 -e "s/^DOASSERTS=.*/# DOASSERTS is not set/" \
464 -e "s/^SUPPORT_LD_DEBUG_EARLY=.*/# SUPPORT_LD_DEBUG_EARLY is not set/" \
465 -e "s/^SUPPORT_LD_DEBUG=.*/# SUPPORT_LD_DEBUG is not set/" \
466 -e "s/^UCLIBC_MJN3_ONLY=.*/# UCLIBC_MJN3_ONLY is not set/" \
468 $(Q)$< -o extra/Configs/Config.in
471 $(Q)$< -n extra/Configs/Config.in
473 cmd_defconfig = $(Q)$< -D extra/Configs/defconfigs/$(ARCH)/$@ extra/Configs/Config.in
474 defconfig: $(conf) ; $(cmd_defconfig)
475 %_defconfig: $(conf) ; $(cmd_defconfig)
478 $(Q)$(MAKE) -C extra/config CLEAN_extra/config
480 # The find here should continue to work as long as we are only symlinking
481 # headers in to include/. I don't see this changing to anything else, so
484 $(SECHO) " CLEAN include"
485 $(Q)$(RM) -r $(top_builddir)include/bits
486 $(Q)find $(top_builddir)include/ -type l -exec rm -f {} +
489 $(Q)$(RM) -r $(top_builddir)lib
490 @$(MAKE) -C utils CLEAN_utils
491 +$(MAKE) -s -C test clean
492 $(Q)$(RM) $(top_builddir)extra/scripts/unifdef
493 $(Q)$(RM) -r $(LOCAL_INSTALL_PATH)
496 -find . \( -name core -o -name \*.orig -o -name \*~ -o -name .\*.dep \) -exec $(RM) {} \;
497 $(RM) $(top_builddir).config $(top_builddir).config.old $(top_builddir).config.cmd
498 $(RM) $(top_builddir)extra/locale/*.tgz
499 $(MAKE) -C extra/config distclean
502 $(RM) ../uClibc-$(VERSION).tar
503 git archive --format=tar --prefix=uClibc-$(VERSION)/ HEAD \
504 > ../uClibc-$(VERSION).tar
505 cat ../uClibc-$(VERSION).tar | bzip2 -c9 > ../uClibc-$(VERSION).tar.bz2
506 cat ../uClibc-$(VERSION).tar | xz -e -c8 > ../uClibc-$(VERSION).tar.xz
507 du -b ../uClibc-$(VERSION).tar.{bz2,xz}
509 test check: test_compile
512 test_compile: $(LOCAL_INSTALL_PATH)
513 $(Q)$(MAKE) -C test compile