3 # Copyright (C) 2000-2008 Erik Andersen <andersen@uclibc.org>
5 # Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
8 #--------------------------------------------------------------
9 # You shouldn't need to mess with anything beyond this point...
10 #--------------------------------------------------------------
11 clean_targets := clean realclean distclean \
12 objclean-y headers_clean-y CLEAN_utils
13 noconfig_targets := menuconfig config oldconfig silentoldconfig randconfig \
14 defconfig allyesconfig allnoconfig \
15 release dist tags help
17 include $(top_srcdir)Rules.mak
18 sub_headers := headers
20 KCONFIG_CONFIG := $(top_builddir).config
24 ifeq ($(HAVE_DOT_CONFIG),y)
29 # In this section, we need .config
30 -include $(top_builddir).config.cmd
32 else # ifeq ($(HAVE_DOT_CONFIG),y)
37 @echo "Need to make a config file first, run: make menuconfig"
40 endif # ifeq ($(HAVE_DOT_CONFIG),y)
42 include $(top_srcdir)ldso/Makefile.in
43 include $(top_srcdir)libcrypt/Makefile.in
44 include $(top_srcdir)libintl/Makefile.in
45 include $(top_srcdir)libm/Makefile.in
46 include $(top_srcdir)libnsl/Makefile.in
47 include $(top_srcdir)libresolv/Makefile.in
48 include $(top_srcdir)libutil/Makefile.in
49 include $(top_srcdir)libpthread/Makefile.in
50 include $(top_srcdir)librt/Makefile.in
51 include $(top_srcdir)libubacktrace/Makefile.in
52 include $(top_srcdir)extra/locale/Makefile.in
54 # last included to catch all the objects added by others (locales/threads)
55 include $(top_srcdir)libc/Makefile.in
57 conf := $(top_builddir)extra/config/conf
58 mconf := $(top_builddir)extra/config/mconf
60 ifeq ($(HAVE_DOT_CONFIG),y)
61 # If the .config changes then we have to make sure that our includes are
62 # updated properly. This would normally work by saying that the headers
63 # have uClibc_config.h as prerequisite but since we _symlink_ the headers
64 # and do not (?) want to rely on 'make -L' we better update them right here,
65 # on spot to save us from alot of hazzle.
66 $(top_builddir)include/bits/uClibc_config.h: $(conf) $(KCONFIG_CONFIG) $(top_srcdir)extra/scripts/conf-header.sh | $(top_builddir)include/bits $(top_builddir)include/config
68 $(Q)@$< -s $(top_srcdir)extra/Configs/Config.in
69 $(Q)$(top_srcdir)extra/scripts/conf-header.sh $(KCONFIG_CONFIG) > $@
72 # The above doesn't work for threads, though. Just using check-symlinks for now.
73 # XXX: FIXME: this is ugly
76 $(top_builddir)include/config/linuxthreads/old.h $(top_builddir)include/config/linuxthreads/new.h:
79 # For the moment, we have to keep re-running this target
80 # because the fix includes scripts rely on pre-processers
81 # in order to generate the headers correctly :(. That
82 # means we can't use the $(HOSTCC) in order to get the
84 ifeq ($(ARCH_USE_MMU),y)
85 export header_extra_args =
87 export header_extra_args = -n
89 HEADERS_BITS_COMMON := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/common/bits/*.h))
90 HEADERS_BITS_ARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/*.h))
91 HEADERS_BITS_SUBARCH :=
92 ifneq ($(TARGET_SUBARCH),)
93 HEADERS_BITS_SUBARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(TARGET_SUBARCH)/*.h))
95 HEADERS_BITS_COMMON := $(filter-out $(HEADERS_BITS_ARCH) $(HEADERS_BITS_SUBARCH) $(HEADERS_BITS_PTHREAD),$(HEADERS_BITS_COMMON))
97 HEADERS_SYS_COMMON := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/common/sys/*.h))
98 HEADERS_SYS_ARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/sys/*.h))
99 HEADERS_SYS_COMMON := $(filter-out $(HEADERS_SYS_ARCH),$(HEADERS_SYS_COMMON))
101 ALL_HEADERS_COMMON := $(top_builddir)include/fpu_control.h \
102 $(top_builddir)include/dl-osinfo.h \
103 $(top_builddir)include/hp-timing.h
104 ALL_HEADERS_BITS_COMMON := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_COMMON))
105 ALL_HEADERS_BITS_ARCH := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_ARCH))
106 ifneq ($(TARGET_SUBARCH),)
107 ALL_HEADERS_BITS_SUBARCH := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_SUBARCH))
109 ALL_HEADERS_BITS_SUBARCH :=
111 ALL_HEADERS_SYS_COMMON := $(addprefix $(top_builddir)include/sys/,$(HEADERS_SYS_COMMON))
112 ALL_HEADERS_SYS_ARCH := $(addprefix $(top_builddir)include/sys/,$(HEADERS_SYS_ARCH))
114 target-headers-sysdep := \
115 $(ALL_HEADERS_COMMON) \
116 $(ALL_HEADERS_BITS_COMMON) \
117 $(ALL_HEADERS_BITS_ARCH) \
118 $(ALL_HEADERS_BITS_SUBARCH) \
119 $(ALL_HEADERS_SYS_COMMON) \
120 $(ALL_HEADERS_SYS_ARCH) \
121 $(ALL_HEADERS_BITS_PTHREAD)
123 $(top_builddir)include/fpu_control.h:
125 $(Q)[ -r $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/$(@F) ] && \
126 $(LN) -fs $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/$(@F) $@ || \
127 $(LN) -fs $(call rel_srcdir)libc/sysdeps/linux/common/$(@F) $@
129 $(top_builddir)include/dl-osinfo.h $(top_builddir)include/hp-timing.h:
130 $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/$(@F) $@
132 $(ALL_HEADERS_BITS_COMMON):
133 $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/bits/$(@F) $@
135 $(ALL_HEADERS_BITS_ARCH):
136 $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(@F) $@
138 ifneq ($(TARGET_SUBARCH),)
139 $(ALL_HEADERS_BITS_SUBARCH):
140 $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(TARGET_SUBARCH)/$(@F) $@
143 ifneq ($(strip $(ALL_HEADERS_SYS_COMMON)),)
144 $(ALL_HEADERS_SYS_COMMON):
145 $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/sys/$(@F) $@
148 ifneq ($(strip $(ALL_HEADERS_SYS_ARCH)),)
149 $(ALL_HEADERS_SYS_ARCH):
150 $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/sys/$(@F) $@
153 $(target-headers-sysdep) $(pregen-headers-y): | $(top_builddir)include/bits $(top_builddir)include/sys
156 $(do_rm) $(ALL_HEADERS_COMMON)
157 headers_clean-y += HEADERCLEAN_common
159 # The headers. Arch specific headers are specified via ARCH_HEADERS in
160 # libc/sysdeps/linux/$(TARGET_ARCH)/Makefile.arch which appends those via
161 # libc/sysdeps/linux/Makefile.commonarch to headers-y
162 headers-y += $(target-headers-sysdep)
164 headers: $(top_builddir)include/bits/uClibc_config.h | subdirs
165 subdirs: $(addprefix $(top_builddir),$(subdirs))
166 pregen-headers: $(top_builddir)include/bits/sysnum.h $(pregen-headers-y)
167 pregen: headers pregen-headers
168 $(Q)$(if $(UCLIBC_HAS_LOCALE),$(MAKE) -C extra/locale locale_headers)
170 $(top_builddir)include/bits/sysnum.h: $(top_srcdir)extra/scripts/gen_bits_syscall_h.sh | $(top_builddir)include/bits
173 tmp=`mktemp $(top_builddir)include/bits/sysnum.h.XXXXXX 2>/dev/null || true`; \
174 [ -z "$$tmp" ] && tmp='$(top_builddir)include/bits/sysnum.h.new'; \
175 KERNEL_HEADERS="${KERNEL_HEADERS}" top_builddir="$(top_builddir)" CC="$(CC) $(CPU_CFLAGS)" $(SHELL) $< > $$tmp; \
176 if cmp $(top_builddir)include/bits/sysnum.h $$tmp >/dev/null 2>&1; then \
179 mv -f $$tmp $(top_builddir)include/bits/sysnum.h; \
181 @# Ugly linux specific hack..
182 $(Q)if grep -q __NR_ $@; then true; else \
184 echo "ERROR: Could not generate syscalls."; \
185 echo "Make sure that you have proper kernel headers."; \
186 echo "Your .config in KERNEL_HEADERS=\"\" was set to:"; \
187 echo "${KERNEL_HEADERS}"; \
191 .PHONY: $(LOCAL_INSTALL_PATH)
192 $(LOCAL_INSTALL_PATH):
193 $(Q)$(MAKE) PREFIX=$(shell pwd)/$(LOCAL_INSTALL_PATH) RUNTIME_PREFIX=/ \
198 install: install_runtime install_dev
201 RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB=$(shell $(top_srcdir)extra/scripts/relative_path.sh $(DEVEL_PREFIX)$(MULTILIB_DIR) $(RUNTIME_PREFIX)$(MULTILIB_DIR))
205 $(top_builddir)extra/scripts/unifdef: |$(top_builddir)extra/scripts
206 $(top_builddir)extra/scripts/unifdef: $(top_srcdir)extra/scripts/unifdef.c
209 # Installs header files.
210 # a "y" here means the feature is enabled and so we should *not* rm it.
211 # if the option expands to nothing though, we can punt the headers.
216 bits/uClibc_arch_features.h \
217 bits/kernel_sigaction.h \
219 bits/kernel_types.h \
221 bits/syscalls-common.h \
222 bits/uClibc_fpmax.h \
223 bits/uClibc_uintmaxtostr.h \
224 bits/uClibc_uwchar.h \
225 bits/uClibc_va_copy.h \
226 bits/sigcontextinfo.h \
232 ifeq ($(UCLIBC_STRICT_HEADERS),y)
233 HEADERS_RM- += sgtty.h
235 HEADERS_RM-$(HAVE_SHARED) += dlfcn.h bits/dlfcn.h
236 HEADERS_RM-$(PTHREADS_DEBUG_SUPPORT) += thread_db.h
237 HEADERS_RM-$(UCLIBC_HAS_BSD_ERR) += err.h
238 HEADERS_RM-$(UCLIBC_HAS_CRYPT) += crypt.h
239 HEADERS_RM-$(UCLIBC_HAS_EPOLL) += sys/epoll.h
240 HEADERS_RM-$(UCLIBC_HAS_FENV) += fenv.h bits/fenv.h bits/fenvinline.h
241 HEADERS_RM-$(UCLIBC_HAS_FLOATS) += complex.h fpu_control.h ieee754.h \
245 HEADERS_RM-$(findstring y,$(UCLIBC_HAS_FTW)$(UCLIBC_HAS_NFTW)) += ftw.h
246 HEADERS_RM-$(UCLIBC_HAS_FTS) += fts.h
247 HEADERS_RM-$(UCLIBC_HAS_GETTEXT_AWARENESS) += libintl.h
248 HEADERS_RM-$(UCLIBC_HAS_GLIBC_CUSTOM_PRINTF) += printf.h
249 HEADERS_RM-$(UCLIBC_HAS_GLOB) += glob.h
250 HEADERS_RM-$(UCLIBC_HAS_GNU_ERROR) += error.h
251 HEADERS_RM-$(UCLIBC_HAS_GNU_GETOPT)$(UCLIBC_HAS_GETOPT_LONG) += getopt.h
252 HEADERS_RM-$(UCLIBC_HAS_IPV6) += netinet/ip6.h netinet/icmp6.h
253 HEADERS_RM-$(UCLIBC_HAS_BACKTRACE) += execinfo.h
254 HEADERS_RM-$(UCLIBC_HAS_LOCALE) += iconv.h bits/uClibc_ctype.h
255 HEADERS_RM-$(UCLIBC_HAS_PTY) += pty.h
256 HEADERS_RM-$(UCLIBC_HAS_REALTIME) += mqueue.h bits/mqueue.h sched.h \
259 HEADERS_RM-$(UCLIBC_HAS_REGEX) += regex.h regexp.h
260 HEADERS_RM-$(UCLIBC_HAS_RPC) += rpc
261 HEADERS_RM-$(UCLIBC_HAS_SHADOW) += shadow.h
262 HEADERS_RM-$(UCLIBC_HAS_SOCKET) += sys/socket.h bits/socket.h sys/socketvar.h
263 HEADERS_RM-$(UCLIBC_HAS_SYSLOG) += syslog.h sys/syslog.h bits/syslog*.h
264 HEADERS_RM-$(UCLIBC_HAS_THREADS) += *thread*.h semaphore.h \
267 HEADERS_RM-$(UCLIBC_HAS_THREADS_NATIVE) += atomic.h bits/atomic.h
268 HEADERS_RM-$(UCLIBC_HAS_UTMPX) += bits/utmpx.h utmpx.h
269 HEADERS_RM-$(UCLIBC_HAS_WCHAR) += wchar.h wctype.h
270 HEADERS_RM-$(UCLIBC_HAS_WORDEXP) += wordexp.h
271 HEADERS_RM-$(UCLIBC_HAS_XATTR) += sys/xattr.h
272 HEADERS_RM-$(UCLIBC_HAS_XLOCALE) += xlocale.h
273 HEADERS_RM-$(UCLIBC_LINUX_SPECIFIC) += sys/fsuid.h sys/inotify.h sys/perm.h \
285 HEADERS_RM-$(UCLIBC_SUPPORT_AI_ADDRCONFIG) += ifaddrs.h
286 HEADERS_RM-$(UCLIBC_SV4_DEPRECATED) += ustat.h sys/ustat.h bits/ustat.h
287 HEADERS_RM-$(UCLIBC_SUSV3_LEGACY) += sys/timeb.h regexp.h
288 HEADERS_RM-$(UCLIBC_SUSV4_LEGACY) += utime.h ucontext.h
290 ifneq ($(findstring install,$(MAKECMDGOALS)),)
291 $(addprefix $(PREFIX)$(DEVEL_PREFIX),include $(MULTILIB_DIR)):
293 # avoid warning about duplicate targets in rule or overrides
294 ifneq ($(abspath $(RUNTIME_PREFIX)$(MULTILIB_DIR)),$(abspath $(DEVEL_PREFIX)$(MULTILIB_DIR)))
295 $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR):
299 install_headers: headers $(top_builddir)extra/scripts/unifdef | $(PREFIX)$(DEVEL_PREFIX)include
300 @$(call disp_install,"include -> $(PREFIX)$(DEVEL_PREFIX)include")
301 $(Q)top_builddir=$(top_builddir) \
302 $(top_srcdir)extra/scripts/install_headers.sh \
303 include $(PREFIX)$(DEVEL_PREFIX)include
304 ifneq ($(O),) # only run this step in O is set i.e. make O=/my/builddir/ ..
305 @$(call disp_install,"$(top_builddir)/include -> $(PREFIX)$(DEVEL_PREFIX)include")
306 $(Q)top_builddir=$(top_builddir) \
307 $(top_srcdir)extra/scripts/install_headers.sh \
308 $(top_builddir)/include $(PREFIX)$(DEVEL_PREFIX)include
310 $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && $(RM) -r $(HEADERS_RM-)
311 ifeq ($(UCLIBC_HAS_WCHAR),)
312 $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && mv -f wchar-stub.h wchar.h
314 $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && $(RM) -f wchar-stub.h
317 # Installs startfiles
318 install_startfiles: startfiles | $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)
319 -$(INSTALL) -m 644 $(startfiles) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/
321 # Installs development library links.
322 install_dev: install_headers install_runtime install_startfiles | $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)
323 -$(INSTALL) -m 644 $(top_builddir)lib/*.a $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/
324 ifeq ($(HAVE_SHARED),y)
325 for i in `cd $(top_builddir) && find lib/ -type l -name 'lib[a-zA-Z]*.so' | \
326 $(SED) -e 's/lib\///'` ; do \
327 $(LN) -sf $(RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB)$$i.$(ABI_VERSION) \
328 $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/$$i; \
330 ifeq ($(HARDWIRED_ABSPATH),y)
331 if [ -f $(top_builddir)lib/libc.so -a -f $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME) ] ; then \
332 $(RM) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \
333 $(SED) -e 's:$(NONSHARED_LIBNAME):$(DEVEL_PREFIX)$(MULTILIB_DIR)/$(NONSHARED_LIBNAME):' \
334 -e 's:$(SHARED_LIBNAME):$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME):' \
335 -e 's:$(UCLIBC_LDSO):$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(UCLIBC_LDSO):' \
336 $(top_builddir)lib/libc.so > $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \
337 $(SED) -i -e 's://:/:g' $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \
340 -$(INSTALL) -m 755 $(top_builddir)lib/libc.so $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/
342 ifeq ($(UCLIBC_HAS_BACKTRACE),y)
343 # Add the AS_NEEDED entry for libubacktrace.so
344 if [ -f $(top_builddir)lib/libc.so -a -f $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME) ] ; then \
345 echo "GROUP ( $(UBACKTRACE_ASNEEDED) )" >> $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \
348 ifeq ($(UCLIBC_HAS_THREADS),y)
349 ifneq ($(LINUXTHREADS_OLD),y)
350 ifeq ($(HARDWIRED_ABSPATH),y)
351 if [ -f $(top_builddir)lib/libpthread.so -a -f $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)/libpthread.so.$(ABI_VERSION) ] ; then \
352 $(RM) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \
353 cp $(top_srcdir)extra/scripts/format.lds $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \
354 echo "GROUP ( $(RUNTIME_PREFIX)$(MULTILIB_DIR)/libpthread.so.$(ABI_VERSION) $(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread_nonshared.a )" \
355 >> $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \
356 $(SED) -i -e 's://:/:g' $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \
359 -$(INSTALL) -m 755 $(top_builddir)lib/libpthread.so $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/
363 ifeq ($(PTHREADS_DEBUG_SUPPORT),y)
364 $(LN) -sf $(RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB)libthread_db.so.1 \
365 $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libthread_db.so
368 # # If we build shared libraries then the static libs are PIC...
369 # # Make _pic.a symlinks to make mklibs.py and similar tools happy.
370 if [ -d $(top_builddir)lib ] ; then \
371 for i in `cd $(top_builddir) && find lib/ -type f -name 'lib*.a' | $(SED) -e 's/lib\///'` ; do \
372 $(LN) -sf $$i $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/`echo $$i \
373 | $(SED) -e 's/\.a$$/_pic.a/'`; \
378 ifeq ($(UCLIBC_FORMAT_SHARED_FLAT),y)
379 for file in $(top_builddir)lib/lib*.gdb; do \
380 if test -f $$file; then \
381 $(INSTALL) -m 755 $$file $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR); \
382 $(INSTALL) -m 755 `echo $$file | $(SED) 's/\.gdb$$//'` \
383 $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR); \
388 # Installs run-time libraries
389 install_runtime: all | $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)
390 ifeq ($(HAVE_SHARED),y)
391 $(INSTALL) -m 755 $(top_builddir)lib/lib*-$(VERSION).so \
392 $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)
393 (cd $(top_builddir)lib && $(TAR) -cf - *.so.*) | $(TAR) -xf - -C $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)
394 @if [ -x $(top_builddir)lib/$(UCLIBC_LDSO_NAME)-$(VERSION).so ] ; then \
397 $(INSTALL) -m 755 $(top_builddir)lib/$(UCLIBC_LDSO_NAME)-$(VERSION).so \
398 $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR); \
403 $(Q)$(MAKE) CROSS="$(CROSS)" CC="$(CC)" -C utils $@
405 # Installs helper applications, such as 'ldd' and 'ldconfig'
407 $(Q)$(MAKE) CROSS="$(CROSS)" CC="$(CC)" -C utils utils_install
409 endif # ifeq ($(HAVE_DOT_CONFIG),y)
412 $(Q)$(MAKE) CROSS="$(CROSS)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils $@
414 install_hostutils: hostutils
415 $(Q)$(MAKE) CROSS="$(CROSS)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils utils_install
417 $(addprefix $(top_builddir),include include/bits include/sys include/config lib extra/config/lxdialog extra/locale extra/scripts $(subdirs)):
421 # ---------------------------------------------------------------------------
422 $(conf) $(mconf): | $(top_builddir)include/config $(top_builddir)extra/config/lxdialog
423 $(Q)$(MAKE) -C extra/config $(@F)
425 arch-defconfigs := $(notdir $(wildcard $(top_srcdir)extra/Configs/defconfigs/$(ARCH)/*_defconfig))
428 $(Q)$< extra/Configs/Config.in
431 $(Q)$< extra/Configs/Config.in
434 $(Q)$< -o extra/Configs/Config.in
436 silentoldconfig: $(conf)
437 $(Q)$< -s extra/Configs/Config.in
440 $(Q)$< -r extra/Configs/Config.in
442 allyesconfig: $(conf)
443 $(Q)$< -y extra/Configs/Config.in
444 $(SED) -i -e "s/^DODEBUG=.*/# DODEBUG is not set/" \
445 -e "s/^DOASSERTS=.*/# DOASSERTS is not set/" \
446 -e "s/^SUPPORT_LD_DEBUG_EARLY=.*/# SUPPORT_LD_DEBUG_EARLY is not set/" \
447 -e "s/^SUPPORT_LD_DEBUG=.*/# SUPPORT_LD_DEBUG is not set/" \
448 -e "s/^UCLIBC_MJN3_ONLY=.*/# UCLIBC_MJN3_ONLY is not set/" \
450 $(Q)$< -o extra/Configs/Config.in
453 $(Q)$< -n extra/Configs/Config.in
456 $(Q)$< -D extra/Configs/defconfigs/$(ARCH)/$@ extra/Configs/Config.in
459 $(Q)$< -D extra/Configs/defconfigs/$(ARCH)/$@ extra/Configs/Config.in
462 $(Q)$(MAKE) -C extra/config CLEAN_extra/config
465 $(Q)$(RM) $(top_builddir)include/fpu_control.h $(top_builddir)include/dl-osinfo.h $(top_builddir)include/hp-timing.h
467 for i in `(cd libc/sysdeps/linux/common/sys; ls *.h)` ; do \
468 $(RM) $(top_builddir)include/sys/$$i; \
470 if [ -d libc/sysdeps/linux/$(TARGET_ARCH)/sys ] ; then \
471 for i in `(cd libc/sysdeps/linux/$(TARGET_ARCH)/sys; ls *.h)` ; do \
472 $(RM) $(top_builddir)include/sys/$$i; \
477 $(Q)$(RM) -r $(top_builddir)lib $(top_builddir)include/bits
478 @$(MAKE) -C utils CLEAN_utils
479 +$(MAKE) -s -C test clean
480 @$(RM) $(top_builddir)include/linux $(top_builddir)include/asm*
481 $(Q)$(RM) $(top_builddir)extra/scripts/unifdef
482 $(Q)$(RM) -r $(LOCAL_INSTALL_PATH)
485 -find . \( -name core -o -name \*.orig -o -name \*~ -o -name .\*.dep \) -exec $(RM) {} \;
486 $(RM) $(top_builddir).config $(top_builddir).config.old $(top_builddir).config.cmd
487 $(RM) $(top_builddir)extra/locale/*.tgz
488 $(MAKE) -C extra/config distclean
491 $(RM) ../uClibc-$(VERSION).tar
492 git archive --format=tar --prefix=uClibc-$(VERSION)/ HEAD \
493 > ../uClibc-$(VERSION).tar
494 cat ../uClibc-$(VERSION).tar | bzip2 -c9 > ../uClibc-$(VERSION).tar.bz2
495 cat ../uClibc-$(VERSION).tar | xz -e -c8 > ../uClibc-$(VERSION).tar.xz
496 du -b ../uClibc-$(VERSION).tar.{bz2,xz}
498 test check: test_compile
501 test_compile: $(LOCAL_INSTALL_PATH)
502 $(Q)$(MAKE) -C test compile