arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         interrupt-parent = <&icoll>;
  16
  17         aliases {
  18                 gpio0 = &gpio0;
  19                 gpio1 = &gpio1;
  20                 gpio2 = &gpio2;
  21                 gpio3 = &gpio3;
  22                 gpio4 = &gpio4;
  23                 saif0 = &saif0;
  24                 saif1 = &saif1;
  25                 serial0 = &auart0;
  26                 serial1 = &auart1;
  27                 serial2 = &auart2;
  28                 serial3 = &auart3;
  29                 serial4 = &auart4;
  30                 ethernet0 = &mac0;
  31                 ethernet1 = &mac1;
  32         };
  33
  34         cpus {
  35                 cpu@0 {
  36                         compatible = "arm,arm926ejs";
  37                 };
  38         };
  39
  40         apb@80000000 {
  41                 compatible = "simple-bus";
  42                 #address-cells = <1>;
  43                 #size-cells = <1>;
  44                 reg = <0x80000000 0x80000>;
  45                 ranges;
  46
  47                 apbh@80000000 {
  48                         compatible = "simple-bus";
  49                         #address-cells = <1>;
  50                         #size-cells = <1>;
  51                         reg = <0x80000000 0x3c900>;
  52                         ranges;
  53
  54                         icoll: interrupt-controller@80000000 {
  55                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  56                                 interrupt-controller;
  57                                 #interrupt-cells = <1>;
  58                                 reg = <0x80000000 0x2000>;
  59                         };
  60
  61                         hsadc@80002000 {
  62                                 reg = <0x80002000 0x2000>;
  63                                 interrupts = <13 87>;
  64                                 dmas = <&dma_apbh 12>;
  65                                 dma-names = "rx";
  66                                 status = "disabled";
  67                         };
  68
  69                         dma_apbh: dma-apbh@80004000 {
  70                                 compatible = "fsl,imx28-dma-apbh";
  71                                 reg = <0x80004000 0x2000>;
  72                                 interrupts = <82 83 84 85
  73                                               88 88 88 88
  74                                               88 88 88 88
  75                                               87 86 0 0>;
  76                                 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
  77                                                   "gpmi0", "gmpi1", "gpmi2", "gmpi3",
  78                                                   "gpmi4", "gmpi5", "gpmi6", "gmpi7",
  79                                                   "hsadc", "lcdif", "empty", "empty";
  80                                 #dma-cells = <1>;
  81                                 dma-channels = <16>;
  82                                 clocks = <&clks 25>;
  83                         };
  84
  85                         perfmon@80006000 {
  86                                 reg = <0x80006000 0x800>;
  87                                 interrupts = <27>;
  88                                 status = "disabled";
  89                         };
  90
  91                         gpmi-nand@8000c000 {
  92                                 compatible = "fsl,imx28-gpmi-nand";
  93                                 #address-cells = <1>;
  94                                 #size-cells = <1>;
  95                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
  96                                 reg-names = "gpmi-nand", "bch";
  97                                 interrupts = <88>, <41>;
  98                                 interrupt-names = "gpmi-dma", "bch";
  99                                 clocks = <&clks 50>;
 100                                 clock-names = "gpmi_io";
 101                                 dmas = <&dma_apbh 4>;
 102                                 dma-names = "rx-tx";
 103                                 fsl,gpmi-dma-channel = <4>;
 104                                 status = "disabled";
 105                         };
 106
 107                         ssp0: ssp@80010000 {
 108                                 #address-cells = <1>;
 109                                 #size-cells = <0>;
 110                                 reg = <0x80010000 0x2000>;
 111                                 interrupts = <96 82>;
 112                                 clocks = <&clks 46>;
 113                                 dmas = <&dma_apbh 0>;
 114                                 dma-names = "rx-tx";
 115                                 fsl,ssp-dma-channel = <0>;
 116                                 status = "disabled";
 117                         };
 118
 119                         ssp1: ssp@80012000 {
 120                                 #address-cells = <1>;
 121                                 #size-cells = <0>;
 122                                 reg = <0x80012000 0x2000>;
 123                                 interrupts = <97 83>;
 124                                 clocks = <&clks 47>;
 125                                 dmas = <&dma_apbh 1>;
 126                                 dma-names = "rx-tx";
 127                                 fsl,ssp-dma-channel = <1>;
 128                                 status = "disabled";
 129                         };
 130
 131                         ssp2: ssp@80014000 {
 132                                 #address-cells = <1>;
 133                                 #size-cells = <0>;
 134                                 reg = <0x80014000 0x2000>;
 135                                 interrupts = <98 84>;
 136                                 clocks = <&clks 48>;
 137                                 dmas = <&dma_apbh 2>;
 138                                 dma-names = "rx-tx";
 139                                 fsl,ssp-dma-channel = <2>;
 140                                 status = "disabled";
 141                         };
 142
 143                         ssp3: ssp@80016000 {
 144                                 #address-cells = <1>;
 145                                 #size-cells = <0>;
 146                                 reg = <0x80016000 0x2000>;
 147                                 interrupts = <99 85>;
 148                                 clocks = <&clks 49>;
 149                                 dmas = <&dma_apbh 3>;
 150                                 dma-names = "rx-tx";
 151                                 fsl,ssp-dma-channel = <3>;
 152                                 status = "disabled";
 153                         };
 154
 155                         pinctrl@80018000 {
 156                                 #address-cells = <1>;
 157                                 #size-cells = <0>;
 158                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 159                                 reg = <0x80018000 0x2000>;
 160
 161                                 gpio0: gpio@0 {
 162                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 163                                         interrupts = <127>;
 164                                         gpio-controller;
 165                                         #gpio-cells = <2>;
 166                                         interrupt-controller;
 167                                         #interrupt-cells = <2>;
 168                                 };
 169
 170                                 gpio1: gpio@1 {
 171                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 172                                         interrupts = <126>;
 173                                         gpio-controller;
 174                                         #gpio-cells = <2>;
 175                                         interrupt-controller;
 176                                         #interrupt-cells = <2>;
 177                                 };
 178
 179                                 gpio2: gpio@2 {
 180                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 181                                         interrupts = <125>;
 182                                         gpio-controller;
 183                                         #gpio-cells = <2>;
 184                                         interrupt-controller;
 185                                         #interrupt-cells = <2>;
 186                                 };
 187
 188                                 gpio3: gpio@3 {
 189                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 190                                         interrupts = <124>;
 191                                         gpio-controller;
 192                                         #gpio-cells = <2>;
 193                                         interrupt-controller;
 194                                         #interrupt-cells = <2>;
 195                                 };
 196
 197                                 gpio4: gpio@4 {
 198                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 199                                         interrupts = <123>;
 200                                         gpio-controller;
 201                                         #gpio-cells = <2>;
 202                                         interrupt-controller;
 203                                         #interrupt-cells = <2>;
 204                                 };
 205
 206                                 duart_pins_a: duart@0 {
 207                                         reg = <0>;
 208                                         fsl,pinmux-ids = <
 209                                                 0x3102 /* MX28_PAD_PWM0__DUART_RX */
 210                                                 0x3112 /* MX28_PAD_PWM1__DUART_TX */
 211                                         >;
 212                                         fsl,drive-strength = <0>;
 213                                         fsl,voltage = <1>;
 214                                         fsl,pull-up = <0>;
 215                                 };
 216
 217                                 duart_pins_b: duart@1 {
 218                                         reg = <1>;
 219                                         fsl,pinmux-ids = <
 220                                                 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
 221                                                 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
 222                                         >;
 223                                         fsl,drive-strength = <0>;
 224                                         fsl,voltage = <1>;
 225                                         fsl,pull-up = <0>;
 226                                 };
 227
 228                                 duart_4pins_a: duart-4pins@0 {
 229                                         reg = <0>;
 230                                         fsl,pinmux-ids = <
 231                                                 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
 232                                                 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
 233                                                 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
 234                                                 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
 235                                         >;
 236                                         fsl,drive-strength = <0>;
 237                                         fsl,voltage = <1>;
 238                                         fsl,pull-up = <0>;
 239                                 };
 240
 241                                 gpmi_pins_a: gpmi-nand@0 {
 242                                         reg = <0>;
 243                                         fsl,pinmux-ids = <
 244                                                 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
 245                                                 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
 246                                                 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
 247                                                 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
 248                                                 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
 249                                                 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
 250                                                 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
 251                                                 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
 252                                                 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
 253                                                 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
 254                                                 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 255                                                 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 256                                                 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
 257                                                 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
 258                                                 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
 259                                         >;
 260                                         fsl,drive-strength = <0>;
 261                                         fsl,voltage = <1>;
 262                                         fsl,pull-up = <0>;
 263                                 };
 264
 265                                 gpmi_status_cfg: gpmi-status-cfg {
 266                                         fsl,pinmux-ids = <
 267                                                 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 268                                                 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 269                                                 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
 270                                         >;
 271                                         fsl,drive-strength = <2>;
 272                                 };
 273
 274                                 auart0_pins_a: auart0@0 {
 275                                         reg = <0>;
 276                                         fsl,pinmux-ids = <
 277                                                 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
 278                                                 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
 279                                                 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
 280                                                 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
 281                                         >;
 282                                         fsl,drive-strength = <0>;
 283                                         fsl,voltage = <1>;
 284                                         fsl,pull-up = <0>;
 285                                 };
 286
 287                                 auart0_2pins_a: auart0-2pins@0 {
 288                                         reg = <0>;
 289                                         fsl,pinmux-ids = <
 290                                                 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
 291                                                 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
 292                                         >;
 293                                         fsl,drive-strength = <0>;
 294                                         fsl,voltage = <1>;
 295                                         fsl,pull-up = <0>;
 296                                 };
 297
 298                                 auart1_pins_a: auart1@0 {
 299                                         reg = <0>;
 300                                         fsl,pinmux-ids = <
 301                                                 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
 302                                                 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
 303                                                 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
 304                                                 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
 305                                         >;
 306                                         fsl,drive-strength = <0>;
 307                                         fsl,voltage = <1>;
 308                                         fsl,pull-up = <0>;
 309                                 };
 310
 311                                 auart1_2pins_a: auart1-2pins@0 {
 312                                         reg = <0>;
 313                                         fsl,pinmux-ids = <
 314                                                 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
 315                                                 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
 316                                         >;
 317                                         fsl,drive-strength = <0>;
 318                                         fsl,voltage = <1>;
 319                                         fsl,pull-up = <0>;
 320                                 };
 321
 322                                 auart2_2pins_a: auart2-2pins@0 {
 323                                         reg = <0>;
 324                                         fsl,pinmux-ids = <
 325                                                 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
 326                                                 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
 327                                         >;
 328                                         fsl,drive-strength = <0>;
 329                                         fsl,voltage = <1>;
 330                                         fsl,pull-up = <0>;
 331                                 };
 332
 333                                 auart3_pins_a: auart3@0 {
 334                                         reg = <0>;
 335                                         fsl,pinmux-ids = <
 336                                                 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
 337                                                 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
 338                                                 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
 339                                                 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
 340                                         >;
 341                                         fsl,drive-strength = <0>;
 342                                         fsl,voltage = <1>;
 343                                         fsl,pull-up = <0>;
 344                                 };
 345
 346                                 auart3_2pins_a: auart3-2pins@0 {
 347                                         reg = <0>;
 348                                         fsl,pinmux-ids = <
 349                                                 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
 350                                                 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
 351                                         >;
 352                                         fsl,drive-strength = <0>;
 353                                         fsl,voltage = <1>;
 354                                         fsl,pull-up = <0>;
 355                                 };
 356
 357                                 mac0_pins_a: mac0@0 {
 358                                         reg = <0>;
 359                                         fsl,pinmux-ids = <
 360                                                 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
 361                                                 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
 362                                                 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
 363                                                 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
 364                                                 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
 365                                                 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
 366                                                 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
 367                                                 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
 368                                                 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
 369                                         >;
 370                                         fsl,drive-strength = <1>;
 371                                         fsl,voltage = <1>;
 372                                         fsl,pull-up = <1>;
 373                                 };
 374
 375                                 mac1_pins_a: mac1@0 {
 376                                         reg = <0>;
 377                                         fsl,pinmux-ids = <
 378                                                 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
 379                                                 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
 380                                                 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
 381                                                 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
 382                                                 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
 383                                                 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
 384                                         >;
 385                                         fsl,drive-strength = <1>;
 386                                         fsl,voltage = <1>;
 387                                         fsl,pull-up = <1>;
 388                                 };
 389
 390                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 391                                         reg = <0>;
 392                                         fsl,pinmux-ids = <
 393                                                 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
 394                                                 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
 395                                                 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
 396                                                 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
 397                                                 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
 398                                                 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
 399                                                 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
 400                                                 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
 401                                                 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
 402                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 403                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 404                                         >;
 405                                         fsl,drive-strength = <1>;
 406                                         fsl,voltage = <1>;
 407                                         fsl,pull-up = <1>;
 408                                 };
 409
 410                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 411                                         reg = <0>;
 412                                         fsl,pinmux-ids = <
 413                                                 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
 414                                                 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
 415                                                 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
 416                                                 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
 417                                                 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
 418                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 419                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 420                                         >;
 421                                         fsl,drive-strength = <1>;
 422                                         fsl,voltage = <1>;
 423                                         fsl,pull-up = <1>;
 424                                 };
 425
 426                                 mmc0_cd_cfg: mmc0-cd-cfg {
 427                                         fsl,pinmux-ids = <
 428                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 429                                         >;
 430                                         fsl,pull-up = <0>;
 431                                 };
 432
 433                                 mmc0_sck_cfg: mmc0-sck-cfg {
 434                                         fsl,pinmux-ids = <
 435                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 436                                         >;
 437                                         fsl,drive-strength = <2>;
 438                                         fsl,pull-up = <0>;
 439                                 };
 440
 441                                 i2c0_pins_a: i2c0@0 {
 442                                         reg = <0>;
 443                                         fsl,pinmux-ids = <
 444                                                 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
 445                                                 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
 446                                         >;
 447                                         fsl,drive-strength = <1>;
 448                                         fsl,voltage = <1>;
 449                                         fsl,pull-up = <1>;
 450                                 };
 451
 452                                 i2c0_pins_b: i2c0@1 {
 453                                         reg = <1>;
 454                                         fsl,pinmux-ids = <
 455                                                 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
 456                                                 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
 457                                         >;
 458                                         fsl,drive-strength = <1>;
 459                                         fsl,voltage = <1>;
 460                                         fsl,pull-up = <1>;
 461                                 };
 462
 463                                 i2c1_pins_a: i2c1@0 {
 464                                         reg = <0>;
 465                                         fsl,pinmux-ids = <
 466                                                 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
 467                                                 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
 468                                         >;
 469                                         fsl,drive-strength = <1>;
 470                                         fsl,voltage = <1>;
 471                                         fsl,pull-up = <1>;
 472                                 };
 473
 474                                 saif0_pins_a: saif0@0 {
 475                                         reg = <0>;
 476                                         fsl,pinmux-ids = <
 477                                                 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
 478                                                 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
 479                                                 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
 480                                                 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
 481                                         >;
 482                                         fsl,drive-strength = <2>;
 483                                         fsl,voltage = <1>;
 484                                         fsl,pull-up = <1>;
 485                                 };
 486
 487                                 saif1_pins_a: saif1@0 {
 488                                         reg = <0>;
 489                                         fsl,pinmux-ids = <
 490                                                 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
 491                                         >;
 492                                         fsl,drive-strength = <2>;
 493                                         fsl,voltage = <1>;
 494                                         fsl,pull-up = <1>;
 495                                 };
 496
 497                                 pwm0_pins_a: pwm0@0 {
 498                                         reg = <0>;
 499                                         fsl,pinmux-ids = <
 500                                                 0x3100 /* MX28_PAD_PWM0__PWM_0 */
 501                                         >;
 502                                         fsl,drive-strength = <0>;
 503                                         fsl,voltage = <1>;
 504                                         fsl,pull-up = <0>;
 505                                 };
 506
 507                                 pwm2_pins_a: pwm2@0 {
 508                                         reg = <0>;
 509                                         fsl,pinmux-ids = <
 510                                                 0x3120 /* MX28_PAD_PWM2__PWM_2 */
 511                                         >;
 512                                         fsl,drive-strength = <0>;
 513                                         fsl,voltage = <1>;
 514                                         fsl,pull-up = <0>;
 515                                 };
 516
 517                                 pwm3_pins_a: pwm3@0 {
 518                                         reg = <0>;
 519                                         fsl,pinmux-ids = <
 520                                                 0x31c0 /* MX28_PAD_PWM3__PWM_3 */
 521                                         >;
 522                                         fsl,drive-strength = <0>;
 523                                         fsl,voltage = <1>;
 524                                         fsl,pull-up = <0>;
 525                                 };
 526
 527                                 pwm3_pins_b: pwm3@1 {
 528                                         reg = <1>;
 529                                         fsl,pinmux-ids = <
 530                                                 0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */
 531                                         >;
 532                                         fsl,drive-strength = <0>;
 533                                         fsl,voltage = <1>;
 534                                         fsl,pull-up = <0>;
 535                                 };
 536
 537                                 pwm4_pins_a: pwm4@0 {
 538                                         reg = <0>;
 539                                         fsl,pinmux-ids = <
 540                                                 0x31d0 /* MX28_PAD_PWM4__PWM_4 */
 541                                         >;
 542                                         fsl,drive-strength = <0>;
 543                                         fsl,voltage = <1>;
 544                                         fsl,pull-up = <0>;
 545                                 };
 546
 547                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 548                                         reg = <0>;
 549                                         fsl,pinmux-ids = <
 550                                                 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
 551                                                 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
 552                                                 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
 553                                                 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
 554                                                 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
 555                                                 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
 556                                                 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
 557                                                 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
 558                                                 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
 559                                                 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
 560                                                 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
 561                                                 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
 562                                                 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
 563                                                 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
 564                                                 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
 565                                                 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
 566                                                 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
 567                                                 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
 568                                                 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
 569                                                 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
 570                                                 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
 571                                                 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
 572                                                 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
 573                                                 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
 574                                         >;
 575                                         fsl,drive-strength = <0>;
 576                                         fsl,voltage = <1>;
 577                                         fsl,pull-up = <0>;
 578                                 };
 579
 580                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
 581                                         reg = <0>;
 582                                         fsl,pinmux-ids = <
 583                                                 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
 584                                                 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
 585                                                 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
 586                                                 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
 587                                                 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
 588                                                 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
 589                                                 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
 590                                                 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
 591                                                 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
 592                                                 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
 593                                                 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
 594                                                 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
 595                                                 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
 596                                                 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
 597                                                 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
 598                                                 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
 599                                         >;
 600                                         fsl,drive-strength = <0>;
 601                                         fsl,voltage = <1>;
 602                                         fsl,pull-up = <0>;
 603                                 };
 604
 605                                 can0_pins_a: can0@0 {
 606                                         reg = <0>;
 607                                         fsl,pinmux-ids = <
 608                                                 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
 609                                                 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
 610                                         >;
 611                                         fsl,drive-strength = <0>;
 612                                         fsl,voltage = <1>;
 613                                         fsl,pull-up = <0>;
 614                                 };
 615
 616                                 can1_pins_a: can1@0 {
 617                                         reg = <0>;
 618                                         fsl,pinmux-ids = <
 619                                                 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
 620                                                 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
 621                                         >;
 622                                         fsl,drive-strength = <0>;
 623                                         fsl,voltage = <1>;
 624                                         fsl,pull-up = <0>;
 625                                 };
 626
 627                                 spi2_pins_a: spi2@0 {
 628                                         reg = <0>;
 629                                         fsl,pinmux-ids = <
 630                                                 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
 631                                                 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
 632                                                 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
 633                                                 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
 634                                         >;
 635                                         fsl,drive-strength = <1>;
 636                                         fsl,voltage = <1>;
 637                                         fsl,pull-up = <1>;
 638                                 };
 639
 640                                 usbphy0_pins_a: usbphy0@0 {
 641                                         reg = <0>;
 642                                         fsl,pinmux-ids = <
 643                                                 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
 644                                         >;
 645                                         fsl,drive-strength = <2>;
 646                                         fsl,voltage = <1>;
 647                                         fsl,pull-up = <0>;
 648                                 };
 649
 650                                 usbphy0_pins_b: usbphy0@1 {
 651                                         reg = <1>;
 652                                         fsl,pinmux-ids = <
 653                                                 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
 654                                         >;
 655                                         fsl,drive-strength = <2>;
 656                                         fsl,voltage = <1>;
 657                                         fsl,pull-up = <0>;
 658                                 };
 659
 660                                 usbphy1_pins_a: usbphy1@0 {
 661                                         reg = <0>;
 662                                         fsl,pinmux-ids = <
 663                                                 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
 664                                         >;
 665                                         fsl,drive-strength = <2>;
 666                                         fsl,voltage = <1>;
 667                                         fsl,pull-up = <0>;
 668                                 };
 669                         };
 670
 671                         digctl@8001c000 {
 672                                 compatible = "fsl,imx28-digctl";
 673                                 reg = <0x8001c000 0x2000>;
 674                                 interrupts = <89>;
 675                                 status = "disabled";
 676                         };
 677
 678                         etm@80022000 {
 679                                 reg = <0x80022000 0x2000>;
 680                                 status = "disabled";
 681                         };
 682
 683                         dma_apbx: dma-apbx@80024000 {
 684                                 compatible = "fsl,imx28-dma-apbx";
 685                                 reg = <0x80024000 0x2000>;
 686                                 interrupts = <78 79 66 0
 687                                               80 81 68 69
 688                                               70 71 72 73
 689                                               74 75 76 77>;
 690                                 interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
 691                                                   "saif0", "saif1", "i2c0", "i2c1",
 692                                                   "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 693                                                   "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 694                                 #dma-cells = <1>;
 695                                 dma-channels = <16>;
 696                                 clocks = <&clks 26>;
 697                         };
 698
 699                         dcp@80028000 {
 700                                 reg = <0x80028000 0x2000>;
 701                                 interrupts = <52 53 54>;
 702                                 status = "disabled";
 703                         };
 704
 705                         pxp@8002a000 {
 706                                 reg = <0x8002a000 0x2000>;
 707                                 interrupts = <39>;
 708                                 status = "disabled";
 709                         };
 710
 711                         ocotp@8002c000 {
 712                                 compatible = "fsl,ocotp";
 713                                 reg = <0x8002c000 0x2000>;
 714                                 status = "disabled";
 715                         };
 716
 717                         axi-ahb@8002e000 {
 718                                 reg = <0x8002e000 0x2000>;
 719                                 status = "disabled";
 720                         };
 721
 722                         lcdif@80030000 {
 723                                 compatible = "fsl,imx28-lcdif";
 724                                 reg = <0x80030000 0x2000>;
 725                                 interrupts = <38 86>;
 726                                 clocks = <&clks 55>;
 727                                 dmas = <&dma_apbh 13>;
 728                                 dma-names = "rx";
 729                                 status = "disabled";
 730                         };
 731
 732                         can0: can@80032000 {
 733                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 734                                 reg = <0x80032000 0x2000>;
 735                                 interrupts = <8>;
 736                                 clocks = <&clks 58>, <&clks 58>;
 737                                 clock-names = "ipg", "per";
 738                                 status = "disabled";
 739                         };
 740
 741                         can1: can@80034000 {
 742                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 743                                 reg = <0x80034000 0x2000>;
 744                                 interrupts = <9>;
 745                                 clocks = <&clks 59>, <&clks 59>;
 746                                 clock-names = "ipg", "per";
 747                                 status = "disabled";
 748                         };
 749
 750                         simdbg@8003c000 {
 751                                 reg = <0x8003c000 0x200>;
 752                                 status = "disabled";
 753                         };
 754
 755                         simgpmisel@8003c200 {
 756                                 reg = <0x8003c200 0x100>;
 757                                 status = "disabled";
 758                         };
 759
 760                         simsspsel@8003c300 {
 761                                 reg = <0x8003c300 0x100>;
 762                                 status = "disabled";
 763                         };
 764
 765                         simmemsel@8003c400 {
 766                                 reg = <0x8003c400 0x100>;
 767                                 status = "disabled";
 768                         };
 769
 770                         gpiomon@8003c500 {
 771                                 reg = <0x8003c500 0x100>;
 772                                 status = "disabled";
 773                         };
 774
 775                         simenet@8003c700 {
 776                                 reg = <0x8003c700 0x100>;
 777                                 status = "disabled";
 778                         };
 779
 780                         armjtag@8003c800 {
 781                                 reg = <0x8003c800 0x100>;
 782                                 status = "disabled";
 783                         };
 784                 };
 785
 786                 apbx@80040000 {
 787                         compatible = "simple-bus";
 788                         #address-cells = <1>;
 789                         #size-cells = <1>;
 790                         reg = <0x80040000 0x40000>;
 791                         ranges;
 792
 793                         clks: clkctrl@80040000 {
 794                                 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
 795                                 reg = <0x80040000 0x2000>;
 796                                 #clock-cells = <1>;
 797                         };
 798
 799                         saif0: saif@80042000 {
 800                                 compatible = "fsl,imx28-saif";
 801                                 reg = <0x80042000 0x2000>;
 802                                 interrupts = <59 80>;
 803                                 clocks = <&clks 53>;
 804                                 dmas = <&dma_apbx 4>;
 805                                 dma-names = "rx-tx";
 806                                 fsl,saif-dma-channel = <4>;
 807                                 status = "disabled";
 808                         };
 809
 810                         power@80044000 {
 811                                 reg = <0x80044000 0x2000>;
 812                                 status = "disabled";
 813                         };
 814
 815                         saif1: saif@80046000 {
 816                                 compatible = "fsl,imx28-saif";
 817                                 reg = <0x80046000 0x2000>;
 818                                 interrupts = <58 81>;
 819                                 clocks = <&clks 54>;
 820                                 dmas = <&dma_apbx 5>;
 821                                 dma-names = "rx-tx";
 822                                 fsl,saif-dma-channel = <5>;
 823                                 status = "disabled";
 824                         };
 825
 826                         lradc@80050000 {
 827                                 compatible = "fsl,imx28-lradc";
 828                                 reg = <0x80050000 0x2000>;
 829                                 interrupts = <10 14 15 16 17 18 19
 830                                                 20 21 22 23 24 25>;
 831                                 status = "disabled";
 832                         };
 833
 834                         spdif@80054000 {
 835                                 reg = <0x80054000 0x2000>;
 836                                 interrupts = <45 66>;
 837                                 dmas = <&dma_apbx 2>;
 838                                 dma-names = "tx";
 839                                 status = "disabled";
 840                         };
 841
 842                         rtc@80056000 {
 843                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 844                                 reg = <0x80056000 0x2000>;
 845                                 interrupts = <29>;
 846                         };
 847
 848                         i2c0: i2c@80058000 {
 849                                 #address-cells = <1>;
 850                                 #size-cells = <0>;
 851                                 compatible = "fsl,imx28-i2c";
 852                                 reg = <0x80058000 0x2000>;
 853                                 interrupts = <111 68>;
 854                                 clock-frequency = <100000>;
 855                                 dmas = <&dma_apbx 6>;
 856                                 dma-names = "rx-tx";
 857                                 fsl,i2c-dma-channel = <6>;
 858                                 status = "disabled";
 859                         };
 860
 861                         i2c1: i2c@8005a000 {
 862                                 #address-cells = <1>;
 863                                 #size-cells = <0>;
 864                                 compatible = "fsl,imx28-i2c";
 865                                 reg = <0x8005a000 0x2000>;
 866                                 interrupts = <110 69>;
 867                                 clock-frequency = <100000>;
 868                                 dmas = <&dma_apbx 7>;
 869                                 dma-names = "rx-tx";
 870                                 fsl,i2c-dma-channel = <7>;
 871                                 status = "disabled";
 872                         };
 873
 874                         pwm: pwm@80064000 {
 875                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 876                                 reg = <0x80064000 0x2000>;
 877                                 clocks = <&clks 44>;
 878                                 #pwm-cells = <2>;
 879                                 fsl,pwm-number = <8>;
 880                                 status = "disabled";
 881                         };
 882
 883                         timrot@80068000 {
 884                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
 885                                 reg = <0x80068000 0x2000>;
 886                                 interrupts = <48 49 50 51>;
 887                                 clocks = <&clks 26>;
 888                         };
 889
 890                         auart0: serial@8006a000 {
 891                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 892                                 reg = <0x8006a000 0x2000>;
 893                                 interrupts = <112 70 71>;
 894                                 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
 895                                 dma-names = "rx", "tx";
 896                                 fsl,auart-dma-channel = <8 9>;
 897                                 clocks = <&clks 45>;
 898                                 status = "disabled";
 899                         };
 900
 901                         auart1: serial@8006c000 {
 902                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 903                                 reg = <0x8006c000 0x2000>;
 904                                 interrupts = <113 72 73>;
 905                                 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
 906                                 dma-names = "rx", "tx";
 907                                 clocks = <&clks 45>;
 908                                 status = "disabled";
 909                         };
 910
 911                         auart2: serial@8006e000 {
 912                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 913                                 reg = <0x8006e000 0x2000>;
 914                                 interrupts = <114 74 75>;
 915                                 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
 916                                 dma-names = "rx", "tx";
 917                                 clocks = <&clks 45>;
 918                                 status = "disabled";
 919                         };
 920
 921                         auart3: serial@80070000 {
 922                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 923                                 reg = <0x80070000 0x2000>;
 924                                 interrupts = <115 76 77>;
 925                                 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
 926                                 dma-names = "rx", "tx";
 927                                 clocks = <&clks 45>;
 928                                 status = "disabled";
 929                         };
 930
 931                         auart4: serial@80072000 {
 932                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 933                                 reg = <0x80072000 0x2000>;
 934                                 interrupts = <116 78 79>;
 935                                 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
 936                                 dma-names = "rx", "tx";
 937                                 clocks = <&clks 45>;
 938                                 status = "disabled";
 939                         };
 940
 941                         duart: serial@80074000 {
 942                                 compatible = "arm,pl011", "arm,primecell";
 943                                 reg = <0x80074000 0x1000>;
 944                                 interrupts = <47>;
 945                                 clocks = <&clks 45>, <&clks 26>;
 946                                 clock-names = "uart", "apb_pclk";
 947                                 status = "disabled";
 948                         };
 949
 950                         usbphy0: usbphy@8007c000 {
 951                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 952                                 reg = <0x8007c000 0x2000>;
 953                                 clocks = <&clks 62>;
 954                                 status = "disabled";
 955                         };
 956
 957                         usbphy1: usbphy@8007e000 {
 958                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 959                                 reg = <0x8007e000 0x2000>;
 960                                 clocks = <&clks 63>;
 961                                 status = "disabled";
 962                         };
 963                 };
 964         };
 965
 966         ahb@80080000 {
 967                 compatible = "simple-bus";
 968                 #address-cells = <1>;
 969                 #size-cells = <1>;
 970                 reg = <0x80080000 0x80000>;
 971                 ranges;
 972
 973                 usb0: usb@80080000 {
 974                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 975                         reg = <0x80080000 0x10000>;
 976                         interrupts = <93>;
 977                         clocks = <&clks 60>;
 978                         fsl,usbphy = <&usbphy0>;
 979                         status = "disabled";
 980                 };
 981
 982                 usb1: usb@80090000 {
 983                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 984                         reg = <0x80090000 0x10000>;
 985                         interrupts = <92>;
 986                         clocks = <&clks 61>;
 987                         fsl,usbphy = <&usbphy1>;
 988                         status = "disabled";
 989                 };
 990
 991                 dflpt@800c0000 {
 992                         reg = <0x800c0000 0x10000>;
 993                         status = "disabled";
 994                 };
 995
 996                 mac0: ethernet@800f0000 {
 997                         compatible = "fsl,imx28-fec";
 998                         reg = <0x800f0000 0x4000>;
 999                         interrupts = <101>;
1000                         clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1001                         clock-names = "ipg", "ahb", "enet_out";
1002                         status = "disabled";
1003                 };
1004
1005                 mac1: ethernet@800f4000 {
1006                         compatible = "fsl,imx28-fec";
1007                         reg = <0x800f4000 0x4000>;
1008                         interrupts = <102>;
1009                         clocks = <&clks 57>, <&clks 57>;
1010                         clock-names = "ipg", "ahb";
1011                         status = "disabled";
1012                 };
1013
1014                 switch@800f8000 {
1015                         reg = <0x800f8000 0x8000>;
1016                         status = "disabled";
1017                 };
1018
1019         };
1020 };