2 * Copyright (C) 2013,2014 Russell King
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
14 * This file is distributed in the hope that it will be useful
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
42 #include <dt-bindings/gpio/gpio.h>
44 clk_sdio: sdio-clock {
45 compatible = "gpio-gate-clock";
47 pinctrl-names = "default";
48 pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
49 enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
53 compatible = "simple-bus";
56 compatible = "regulator-fixed";
59 pinctrl-names = "default";
60 pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
61 regulator-name = "brcm_reg";
62 regulator-min-microvolt = <3300000>;
63 regulator-max-microvolt = <3300000>;
64 startup-delay-us = <200000>;
68 usdhc1_pwrseq: usdhc1_pwrseq {
69 compatible = "mmc-pwrseq-simple";
70 reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
71 <&gpio6 0 GPIO_ACTIVE_LOW>;
73 clock-names = "ext_clock";
79 pinctrl_microsom_brcm_bt: microsom-brcm-bt {
81 MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070
82 MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x40013070
83 MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070
87 pinctrl_microsom_brcm_osc: microsom-brcm-osc {
89 MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
93 pinctrl_microsom_brcm_reg: microsom-brcm-reg {
95 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x40013070
99 pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
101 MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0
102 MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x40013070
103 MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070
104 MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x40013070
108 pinctrl_microsom_uart1: microsom-uart1 {
110 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
111 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
115 pinctrl_microsom_uart4: microsom-uart4 {
117 MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
118 MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
119 MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
120 MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
124 pinctrl_microsom_usdhc1: microsom-usdhc1 {
126 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
127 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
128 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
129 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
130 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
131 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
138 pinctrl-names = "default";
139 pinctrl-0 = <&pinctrl_microsom_uart1>;
143 /* UART4 - Connected to optional BRCM Wifi/BT/FM */
145 pinctrl-names = "default";
146 pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
151 /* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
153 pinctrl-names = "default";
154 pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
156 mmc-pwrseq = <&usdhc1_pwrseq>;
157 keep-power-in-suspend;
159 vmmc-supply = <®_brcm>;