2 * linux/arch/arm/mach-pxa/lubbock.c
4 * Support for the Intel DBPXA250 Development Platform.
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #include <linux/gpio.h>
15 #include <linux/gpio/machine.h>
16 #include <linux/module.h>
17 #include <linux/kernel.h>
18 #include <linux/init.h>
20 #include <linux/platform_device.h>
21 #include <linux/syscore_ops.h>
22 #include <linux/major.h>
24 #include <linux/interrupt.h>
25 #include <linux/mtd/mtd.h>
26 #include <linux/mtd/partitions.h>
27 #include <linux/smc91x.h>
28 #include <linux/slab.h>
29 #include <linux/leds.h>
31 #include <linux/spi/spi.h>
32 #include <linux/spi/ads7846.h>
33 #include <linux/spi/pxa2xx_spi.h>
35 #include <asm/setup.h>
36 #include <asm/memory.h>
37 #include <asm/mach-types.h>
38 #include <mach/hardware.h>
40 #include <asm/sizes.h>
42 #include <asm/mach/arch.h>
43 #include <asm/mach/map.h>
44 #include <asm/mach/irq.h>
45 #include <asm/mach/flash.h>
47 #include <asm/hardware/sa1111.h>
49 #include <mach/pxa25x.h>
50 #include <mach/audio.h>
51 #include <mach/lubbock.h>
53 #include <linux/platform_data/irda-pxaficp.h>
54 #include <linux/platform_data/video-pxafb.h>
55 #include <linux/platform_data/mmc-pxamci.h>
57 #include <mach/smemc.h>
62 static unsigned long lubbock_pin_config[] __initdata = {
63 GPIO15_nCS_1, /* CS1 - Flash */
64 GPIO78_nCS_2, /* CS2 - Baseboard FGPA */
65 GPIO79_nCS_3, /* CS3 - SMC ethernet */
66 GPIO80_nCS_4, /* CS4 - SA1111 */
75 GPIO29_AC97_SDATA_IN_0,
76 GPIO30_AC97_SDATA_OUT,
79 /* LCD - 16bpp DSTN */
80 GPIOxx_LCD_DSTN_16BPP,
108 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
111 #define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
112 #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
114 void lubbock_set_hexled(uint32_t value)
119 void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
123 local_irq_save(flags);
124 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
125 local_irq_restore(flags);
127 EXPORT_SYMBOL(lubbock_set_misc_wr);
129 static int lubbock_udc_is_connected(void)
131 return (LUB_MISC_RD & (1 << 9)) == 0;
134 static struct pxa2xx_udc_mach_info udc_info __initdata = {
135 .udc_is_connected = lubbock_udc_is_connected,
136 // no D+ pullup; lubbock can't connect/disconnect in software
139 static struct resource sa1111_resources[] = {
143 .flags = IORESOURCE_MEM,
146 .start = LUBBOCK_SA1111_IRQ,
147 .end = LUBBOCK_SA1111_IRQ,
148 .flags = IORESOURCE_IRQ,
152 static struct sa1111_platform_data sa1111_info = {
153 .irq_base = LUBBOCK_SA1111_IRQ_BASE,
154 .disable_devs = SA1111_DEVID_SAC,
157 static struct platform_device sa1111_device = {
160 .num_resources = ARRAY_SIZE(sa1111_resources),
161 .resource = sa1111_resources,
163 .platform_data = &sa1111_info,
167 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
168 * you can select it to replace the ucb1400 by switching the touchscreen cable
169 * (to J5) and poking board registers (as done below). Else it's only useful
170 * for the temperature sensors.
172 static struct pxa2xx_spi_master pxa_ssp_master_info = {
176 static int lubbock_ads7846_pendown_state(void)
178 /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
182 static struct ads7846_platform_data ads_info = {
184 .vref_delay_usecs = 100, /* internal, no cap */
185 .get_pendown_state = lubbock_ads7846_pendown_state,
186 // .x_plate_ohms = 500, /* GUESS! */
187 // .y_plate_ohms = 500, /* GUESS! */
190 static void ads7846_cs(u32 command)
192 static const unsigned TS_nCS = 1 << 11;
193 lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
196 static struct pxa2xx_spi_chip ads_hw = {
199 .cs_control = ads7846_cs,
202 static struct spi_board_info spi_board_info[] __initdata = { {
203 .modalias = "ads7846",
204 .platform_data = &ads_info,
205 .controller_data = &ads_hw,
206 .irq = LUBBOCK_BB_IRQ,
207 .max_speed_hz = 120000 /* max sample rate at 3V */
208 * 26 /* command + data + overhead */,
214 static struct resource smc91x_resources[] = {
216 .name = "smc91x-regs",
219 .flags = IORESOURCE_MEM,
222 .start = LUBBOCK_ETH_IRQ,
223 .end = LUBBOCK_ETH_IRQ,
224 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
227 .name = "smc91x-attrib",
230 .flags = IORESOURCE_MEM,
234 static struct smc91x_platdata lubbock_smc91x_info = {
235 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
238 static struct platform_device smc91x_device = {
241 .num_resources = ARRAY_SIZE(smc91x_resources),
242 .resource = smc91x_resources,
244 .platform_data = &lubbock_smc91x_info,
248 static struct resource flash_resources[] = {
252 .flags = IORESOURCE_MEM,
256 .end = 0x04000000 + SZ_64M - 1,
257 .flags = IORESOURCE_MEM,
261 static struct mtd_partition lubbock_partitions[] = {
263 .name = "Bootloader",
266 .mask_flags = MTD_WRITEABLE /* force read-only */
270 .offset = 0x00040000,
272 .name = "Filesystem",
273 .size = MTDPART_SIZ_FULL,
278 static struct flash_platform_data lubbock_flash_data[2] = {
280 .map_name = "cfi_probe",
281 .parts = lubbock_partitions,
282 .nr_parts = ARRAY_SIZE(lubbock_partitions),
284 .map_name = "cfi_probe",
290 static struct platform_device lubbock_flash_device[2] = {
292 .name = "pxa2xx-flash",
295 .platform_data = &lubbock_flash_data[0],
297 .resource = &flash_resources[0],
301 .name = "pxa2xx-flash",
304 .platform_data = &lubbock_flash_data[1],
306 .resource = &flash_resources[1],
311 static struct resource lubbock_cplds_resources[] = {
313 .start = LUBBOCK_FPGA_PHYS + 0xc0,
314 .end = LUBBOCK_FPGA_PHYS + 0xe0 - 1,
315 .flags = IORESOURCE_MEM,
318 .start = PXA_GPIO_TO_IRQ(0),
319 .end = PXA_GPIO_TO_IRQ(0),
320 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
323 .start = LUBBOCK_IRQ(0),
324 .end = LUBBOCK_IRQ(6),
325 .flags = IORESOURCE_IRQ,
329 static struct platform_device lubbock_cplds_device = {
330 .name = "pxa_cplds_irqs",
332 .resource = &lubbock_cplds_resources[0],
337 static struct platform_device *devices[] __initdata = {
340 &lubbock_flash_device[0],
341 &lubbock_flash_device[1],
342 &lubbock_cplds_device,
345 static struct pxafb_mode_info sharp_lm8v31_mode = {
356 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
360 static struct pxafb_mach_info sharp_lm8v31 = {
361 .modes = &sharp_lm8v31_mode,
365 .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
366 LCD_AC_BIAS_FREQ(255),
369 #define MMC_POLL_RATE msecs_to_jiffies(1000)
371 static void lubbock_mmc_poll(unsigned long);
372 static irq_handler_t mmc_detect_int;
374 static struct timer_list mmc_timer = {
375 .function = lubbock_mmc_poll,
378 static void lubbock_mmc_poll(unsigned long data)
382 /* clear any previous irq state, then ... */
383 local_irq_save(flags);
384 LUB_IRQ_SET_CLR &= ~(1 << 0);
385 local_irq_restore(flags);
387 /* poll until mmc/sd card is removed */
388 if (LUB_IRQ_SET_CLR & (1 << 0))
389 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
391 (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
392 enable_irq(LUBBOCK_SD_IRQ);
396 static irqreturn_t lubbock_detect_int(int irq, void *data)
398 /* IRQ is level triggered; disable, and poll for removal */
400 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
402 return mmc_detect_int(irq, data);
405 static int lubbock_mci_init(struct device *dev,
406 irq_handler_t detect_int,
409 /* detect card insert/eject */
410 mmc_detect_int = detect_int;
411 init_timer(&mmc_timer);
412 mmc_timer.data = (unsigned long) data;
413 return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
414 0, "lubbock-sd-detect", data);
417 static int lubbock_mci_get_ro(struct device *dev)
419 return (LUB_MISC_RD & (1 << 2)) != 0;
422 static void lubbock_mci_exit(struct device *dev, void *data)
424 free_irq(LUBBOCK_SD_IRQ, data);
425 del_timer_sync(&mmc_timer);
428 static struct pxamci_platform_data lubbock_mci_platform_data = {
429 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
430 .detect_delay_ms = 10,
431 .init = lubbock_mci_init,
432 .get_ro = lubbock_mci_get_ro,
433 .exit = lubbock_mci_exit,
434 .gpio_card_detect = -1,
439 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
443 local_irq_save(flags);
444 if (mode & IR_SIRMODE) {
445 LUB_MISC_WR &= ~(1 << 4);
446 } else if (mode & IR_FIRMODE) {
447 LUB_MISC_WR |= 1 << 4;
449 pxa2xx_transceiver_mode(dev, mode);
450 local_irq_restore(flags);
453 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
455 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
456 .transceiver_mode = lubbock_irda_transceiver_mode,
459 static void __init lubbock_init(void)
461 int flashboot = (LUB_CONF_SWITCHES & 1);
463 pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
465 pxa_set_ffuart_info(NULL);
466 pxa_set_btuart_info(NULL);
467 pxa_set_stuart_info(NULL);
469 clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
470 pxa_set_udc_info(&udc_info);
471 pxa_set_fb_info(NULL, &sharp_lm8v31);
472 pxa_set_mci_info(&lubbock_mci_platform_data);
473 pxa_set_ficp_info(&lubbock_ficp_platform_data);
474 pxa_set_ac97_info(NULL);
476 lubbock_flash_data[0].width = lubbock_flash_data[1].width =
477 (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
478 /* Compensate for the nROMBT switch which swaps the flash banks */
479 printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
480 flashboot?"Flash":"ROM", flashboot);
482 lubbock_flash_data[flashboot^1].name = "application-flash";
483 lubbock_flash_data[flashboot].name = "boot-rom";
484 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
486 pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
487 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
490 static struct map_desc lubbock_io_desc[] __initdata = {
492 .virtual = LUBBOCK_FPGA_VIRT,
493 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
494 .length = 0x00100000,
499 static void __init lubbock_map_io(void)
502 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
508 * Driver for the 8 discrete LEDs available for general use:
509 * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
510 * so be sure to not monkey with them here.
513 #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
515 struct led_classdev cdev;
520 * The triggers lines up below will only be used if the
521 * LED triggers are compiled in.
523 static const struct {
527 { "lubbock:D28", "default-on", },
528 { "lubbock:D27", "cpu0", },
529 { "lubbock:D26", "heartbeat" },
537 static void lubbock_led_set(struct led_classdev *cdev,
538 enum led_brightness b)
540 struct lubbock_led *led = container_of(cdev,
541 struct lubbock_led, cdev);
542 u32 reg = LUB_DISC_BLNK_LED;
549 LUB_DISC_BLNK_LED = reg;
552 static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
554 struct lubbock_led *led = container_of(cdev,
555 struct lubbock_led, cdev);
556 u32 reg = LUB_DISC_BLNK_LED;
558 return (reg & led->mask) ? LED_FULL : LED_OFF;
561 static int __init lubbock_leds_init(void)
565 if (!machine_is_lubbock())
569 LUB_DISC_BLNK_LED |= 0xff;
570 for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
571 struct lubbock_led *led;
573 led = kzalloc(sizeof(*led), GFP_KERNEL);
577 led->cdev.name = lubbock_leds[i].name;
578 led->cdev.brightness_set = lubbock_led_set;
579 led->cdev.brightness_get = lubbock_led_get;
580 led->cdev.default_trigger = lubbock_leds[i].trigger;
583 if (led_classdev_register(NULL, &led->cdev) < 0) {
593 * Since we may have triggers on any subsystem, defer registration
594 * until after subsystem_init.
596 fs_initcall(lubbock_leds_init);
599 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
600 /* Maintainer: MontaVista Software Inc. */
601 .map_io = lubbock_map_io,
602 .nr_irqs = LUBBOCK_NR_IRQS,
603 .init_irq = pxa25x_init_irq,
604 .handle_irq = pxa25x_handle_irq,
605 .init_time = pxa_timer_init,
606 .init_machine = lubbock_init,
607 .restart = pxa_restart,