1 # SPDX-License-Identifier: GPL-2.0-only
4 select ACPI_CCA_REQUIRED if ACPI
5 select ACPI_GENERIC_GSI if ACPI
6 select ACPI_GTDT if ACPI
7 select ACPI_IORT if ACPI
8 select ACPI_REDUCED_HARDWARE_ONLY if ACPI
9 select ACPI_MCFG if (ACPI && PCI)
10 select ACPI_SPCR_TABLE if ACPI
11 select ACPI_PPTT if ACPI
12 select ARCH_HAS_DEBUG_VIRTUAL
13 select ARCH_HAS_DEVMEM_IS_ALLOWED
14 select ARCH_HAS_DMA_PREP_COHERENT
15 select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
16 select ARCH_HAS_FAST_MULTIPLIER
17 select ARCH_HAS_FORTIFY_SOURCE
18 select ARCH_HAS_GCOV_PROFILE_ALL
19 select ARCH_HAS_GIGANTIC_PAGE
21 select ARCH_HAS_KEEPINITRD
22 select ARCH_HAS_MEMBARRIER_SYNC_CORE
23 select ARCH_HAS_PTE_DEVMAP
24 select ARCH_HAS_PTE_SPECIAL
25 select ARCH_HAS_SETUP_DMA_OPS
26 select ARCH_HAS_SET_DIRECT_MAP
27 select ARCH_HAS_SET_MEMORY
28 select ARCH_HAS_STRICT_KERNEL_RWX
29 select ARCH_HAS_STRICT_MODULE_RWX
30 select ARCH_HAS_SYNC_DMA_FOR_DEVICE
31 select ARCH_HAS_SYNC_DMA_FOR_CPU
32 select ARCH_HAS_SYSCALL_WRAPPER
33 select ARCH_HAS_TEARDOWN_DMA_OPS if IOMMU_SUPPORT
34 select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
35 select ARCH_HAVE_NMI_SAFE_CMPXCHG
36 select ARCH_INLINE_READ_LOCK if !PREEMPTION
37 select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION
38 select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPTION
39 select ARCH_INLINE_READ_LOCK_IRQSAVE if !PREEMPTION
40 select ARCH_INLINE_READ_UNLOCK if !PREEMPTION
41 select ARCH_INLINE_READ_UNLOCK_BH if !PREEMPTION
42 select ARCH_INLINE_READ_UNLOCK_IRQ if !PREEMPTION
43 select ARCH_INLINE_READ_UNLOCK_IRQRESTORE if !PREEMPTION
44 select ARCH_INLINE_WRITE_LOCK if !PREEMPTION
45 select ARCH_INLINE_WRITE_LOCK_BH if !PREEMPTION
46 select ARCH_INLINE_WRITE_LOCK_IRQ if !PREEMPTION
47 select ARCH_INLINE_WRITE_LOCK_IRQSAVE if !PREEMPTION
48 select ARCH_INLINE_WRITE_UNLOCK if !PREEMPTION
49 select ARCH_INLINE_WRITE_UNLOCK_BH if !PREEMPTION
50 select ARCH_INLINE_WRITE_UNLOCK_IRQ if !PREEMPTION
51 select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE if !PREEMPTION
52 select ARCH_INLINE_SPIN_TRYLOCK if !PREEMPTION
53 select ARCH_INLINE_SPIN_TRYLOCK_BH if !PREEMPTION
54 select ARCH_INLINE_SPIN_LOCK if !PREEMPTION
55 select ARCH_INLINE_SPIN_LOCK_BH if !PREEMPTION
56 select ARCH_INLINE_SPIN_LOCK_IRQ if !PREEMPTION
57 select ARCH_INLINE_SPIN_LOCK_IRQSAVE if !PREEMPTION
58 select ARCH_INLINE_SPIN_UNLOCK if !PREEMPTION
59 select ARCH_INLINE_SPIN_UNLOCK_BH if !PREEMPTION
60 select ARCH_INLINE_SPIN_UNLOCK_IRQ if !PREEMPTION
61 select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPTION
62 select ARCH_KEEP_MEMBLOCK
63 select ARCH_USE_CMPXCHG_LOCKREF
64 select ARCH_USE_QUEUED_RWLOCKS
65 select ARCH_USE_QUEUED_SPINLOCKS
66 select ARCH_SUPPORTS_MEMORY_FAILURE
67 select ARCH_SUPPORTS_ATOMIC_RMW
68 select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && (GCC_VERSION >= 50000 || CC_IS_CLANG)
69 select ARCH_SUPPORTS_NUMA_BALANCING
70 select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
71 select ARCH_WANT_DEFAULT_BPF_JIT
72 select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
73 select ARCH_WANT_FRAME_POINTERS
74 select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
75 select ARCH_HAS_UBSAN_SANITIZE_ALL
79 select AUDIT_ARCH_COMPAT_GENERIC
80 select ARM_GIC_V2M if PCI
82 select ARM_GIC_V3_ITS if PCI
84 select BUILDTIME_TABLE_SORT
85 select CLONE_BACKWARDS
87 select CPU_PM if (SUSPEND || CPU_IDLE)
89 select DCACHE_WORD_ACCESS
90 select DMA_DIRECT_REMAP
93 select GENERIC_ALLOCATOR
94 select GENERIC_ARCH_TOPOLOGY
95 select GENERIC_CLOCKEVENTS
96 select GENERIC_CLOCKEVENTS_BROADCAST
97 select GENERIC_CPU_AUTOPROBE
98 select GENERIC_CPU_VULNERABILITIES
99 select GENERIC_EARLY_IOREMAP
100 select GENERIC_IDLE_POLL_SETUP
101 select GENERIC_IRQ_MULTI_HANDLER
102 select GENERIC_IRQ_PROBE
103 select GENERIC_IRQ_SHOW
104 select GENERIC_IRQ_SHOW_LEVEL
105 select GENERIC_PCI_IOMAP
106 select GENERIC_PTDUMP
107 select GENERIC_SCHED_CLOCK
108 select GENERIC_SMP_IDLE_THREAD
109 select GENERIC_STRNCPY_FROM_USER
110 select GENERIC_STRNLEN_USER
111 select GENERIC_TIME_VSYSCALL
112 select GENERIC_GETTIMEOFDAY
113 select GENERIC_VDSO_CLOCK_MODE
114 select HANDLE_DOMAIN_IRQ
115 select HARDIRQS_SW_RESEND
117 select HAVE_ACPI_APEI if (ACPI && EFI)
118 select HAVE_ALIGNED_STRUCT_PAGE if SLUB
119 select HAVE_ARCH_AUDITSYSCALL
120 select HAVE_ARCH_BITREVERSE
121 select HAVE_ARCH_HUGE_VMAP
122 select HAVE_ARCH_JUMP_LABEL
123 select HAVE_ARCH_JUMP_LABEL_RELATIVE
124 select HAVE_ARCH_KASAN if !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
125 select HAVE_ARCH_KASAN_SW_TAGS if HAVE_ARCH_KASAN
126 select HAVE_ARCH_KGDB
127 select HAVE_ARCH_MMAP_RND_BITS
128 select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
129 select HAVE_ARCH_PREL32_RELOCATIONS
130 select HAVE_ARCH_SECCOMP_FILTER
131 select HAVE_ARCH_STACKLEAK
132 select HAVE_ARCH_THREAD_STRUCT_WHITELIST
133 select HAVE_ARCH_TRACEHOOK
134 select HAVE_ARCH_TRANSPARENT_HUGEPAGE
135 select HAVE_ARCH_VMAP_STACK
136 select HAVE_ARM_SMCCC
137 select HAVE_ASM_MODVERSIONS
139 select HAVE_C_RECORDMCOUNT
140 select HAVE_CMPXCHG_DOUBLE
141 select HAVE_CMPXCHG_LOCAL
142 select HAVE_CONTEXT_TRACKING
143 select HAVE_COPY_THREAD_TLS
144 select HAVE_DEBUG_BUGVERBOSE
145 select HAVE_DEBUG_KMEMLEAK
146 select HAVE_DMA_CONTIGUOUS
147 select HAVE_DYNAMIC_FTRACE
148 select HAVE_DYNAMIC_FTRACE_WITH_REGS \
149 if $(cc-option,-fpatchable-function-entry=2)
150 select HAVE_EFFICIENT_UNALIGNED_ACCESS
152 select HAVE_FTRACE_MCOUNT_RECORD
153 select HAVE_FUNCTION_TRACER
154 select HAVE_FUNCTION_ERROR_INJECTION
155 select HAVE_FUNCTION_GRAPH_TRACER
156 select HAVE_GCC_PLUGINS
157 select HAVE_HW_BREAKPOINT if PERF_EVENTS
158 select HAVE_IRQ_TIME_ACCOUNTING
159 select HAVE_MEMBLOCK_NODE_MAP if NUMA
161 select HAVE_PATA_PLATFORM
162 select HAVE_PERF_EVENTS
163 select HAVE_PERF_REGS
164 select HAVE_PERF_USER_STACK_DUMP
165 select HAVE_REGS_AND_STACK_ACCESS_API
166 select HAVE_FUNCTION_ARG_ACCESS_API
167 select HAVE_FUTEX_CMPXCHG if FUTEX
168 select MMU_GATHER_RCU_TABLE_FREE
170 select HAVE_STACKPROTECTOR
171 select HAVE_SYSCALL_TRACEPOINTS
173 select HAVE_KRETPROBES
174 select HAVE_GENERIC_VDSO
175 select IOMMU_DMA if IOMMU_SUPPORT
177 select IRQ_FORCED_THREADING
178 select MODULES_USE_ELF_RELA
179 select NEED_DMA_MAP_STATE
180 select NEED_SG_DMA_LENGTH
182 select OF_EARLY_FLATTREE
183 select PCI_DOMAINS_GENERIC if PCI
184 select PCI_ECAM if (ACPI && PCI)
185 select PCI_SYSCALL if PCI
190 select SYSCTL_EXCEPTION_TRACE
191 select THREAD_INFO_IN_TASK
193 ARM 64-bit (AArch64) Linux support.
201 config ARM64_PAGE_SHIFT
203 default 16 if ARM64_64K_PAGES
204 default 14 if ARM64_16K_PAGES
207 config ARM64_CONT_SHIFT
209 default 5 if ARM64_64K_PAGES
210 default 7 if ARM64_16K_PAGES
213 config ARCH_MMAP_RND_BITS_MIN
214 default 14 if ARM64_64K_PAGES
215 default 16 if ARM64_16K_PAGES
218 # max bits determined by the following formula:
219 # VA_BITS - PAGE_SHIFT - 3
220 config ARCH_MMAP_RND_BITS_MAX
221 default 19 if ARM64_VA_BITS=36
222 default 24 if ARM64_VA_BITS=39
223 default 27 if ARM64_VA_BITS=42
224 default 30 if ARM64_VA_BITS=47
225 default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
226 default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
227 default 33 if ARM64_VA_BITS=48
228 default 14 if ARM64_64K_PAGES
229 default 16 if ARM64_16K_PAGES
232 config ARCH_MMAP_RND_COMPAT_BITS_MIN
233 default 7 if ARM64_64K_PAGES
234 default 9 if ARM64_16K_PAGES
237 config ARCH_MMAP_RND_COMPAT_BITS_MAX
243 config STACKTRACE_SUPPORT
246 config ILLEGAL_POINTER_VALUE
248 default 0xdead000000000000
250 config LOCKDEP_SUPPORT
253 config TRACE_IRQFLAGS_SUPPORT
260 config GENERIC_BUG_RELATIVE_POINTERS
262 depends on GENERIC_BUG
264 config GENERIC_HWEIGHT
270 config GENERIC_CALIBRATE_DELAY
274 bool "Support DMA zone" if EXPERT
278 bool "Support DMA32 zone" if EXPERT
281 config ARCH_ENABLE_MEMORY_HOTPLUG
287 config KERNEL_MODE_NEON
290 config FIX_EARLYCON_MEM
293 config PGTABLE_LEVELS
295 default 2 if ARM64_16K_PAGES && ARM64_VA_BITS_36
296 default 2 if ARM64_64K_PAGES && ARM64_VA_BITS_42
297 default 3 if ARM64_64K_PAGES && (ARM64_VA_BITS_48 || ARM64_VA_BITS_52)
298 default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39
299 default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47
300 default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48
302 config ARCH_SUPPORTS_UPROBES
305 config ARCH_PROC_KCORE_TEXT
308 config BROKEN_GAS_INST
309 def_bool !$(as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n)
311 config KASAN_SHADOW_OFFSET
314 default 0xdfffa00000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && !KASAN_SW_TAGS
315 default 0xdfffd00000000000 if ARM64_VA_BITS_47 && !KASAN_SW_TAGS
316 default 0xdffffe8000000000 if ARM64_VA_BITS_42 && !KASAN_SW_TAGS
317 default 0xdfffffd000000000 if ARM64_VA_BITS_39 && !KASAN_SW_TAGS
318 default 0xdffffffa00000000 if ARM64_VA_BITS_36 && !KASAN_SW_TAGS
319 default 0xefff900000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && KASAN_SW_TAGS
320 default 0xefffc80000000000 if ARM64_VA_BITS_47 && KASAN_SW_TAGS
321 default 0xeffffe4000000000 if ARM64_VA_BITS_42 && KASAN_SW_TAGS
322 default 0xefffffc800000000 if ARM64_VA_BITS_39 && KASAN_SW_TAGS
323 default 0xeffffff900000000 if ARM64_VA_BITS_36 && KASAN_SW_TAGS
324 default 0xffffffffffffffff
326 source "arch/arm64/Kconfig.platforms"
328 menu "Kernel Features"
330 menu "ARM errata workarounds via the alternatives framework"
332 config ARM64_WORKAROUND_CLEAN_CACHE
335 config ARM64_ERRATUM_826319
336 bool "Cortex-A53: 826319: System might deadlock if a write cannot complete until read data is accepted"
338 select ARM64_WORKAROUND_CLEAN_CACHE
340 This option adds an alternative code sequence to work around ARM
341 erratum 826319 on Cortex-A53 parts up to r0p2 with an AMBA 4 ACE or
342 AXI master interface and an L2 cache.
344 If a Cortex-A53 uses an AMBA AXI4 ACE interface to other processors
345 and is unable to accept a certain write via this interface, it will
346 not progress on read data presented on the read data channel and the
349 The workaround promotes data cache clean instructions to
350 data cache clean-and-invalidate.
351 Please note that this does not necessarily enable the workaround,
352 as it depends on the alternative framework, which will only patch
353 the kernel if an affected CPU is detected.
357 config ARM64_ERRATUM_827319
358 bool "Cortex-A53: 827319: Data cache clean instructions might cause overlapping transactions to the interconnect"
360 select ARM64_WORKAROUND_CLEAN_CACHE
362 This option adds an alternative code sequence to work around ARM
363 erratum 827319 on Cortex-A53 parts up to r0p2 with an AMBA 5 CHI
364 master interface and an L2 cache.
366 Under certain conditions this erratum can cause a clean line eviction
367 to occur at the same time as another transaction to the same address
368 on the AMBA 5 CHI interface, which can cause data corruption if the
369 interconnect reorders the two transactions.
371 The workaround promotes data cache clean instructions to
372 data cache clean-and-invalidate.
373 Please note that this does not necessarily enable the workaround,
374 as it depends on the alternative framework, which will only patch
375 the kernel if an affected CPU is detected.
379 config ARM64_ERRATUM_824069
380 bool "Cortex-A53: 824069: Cache line might not be marked as clean after a CleanShared snoop"
382 select ARM64_WORKAROUND_CLEAN_CACHE
384 This option adds an alternative code sequence to work around ARM
385 erratum 824069 on Cortex-A53 parts up to r0p2 when it is connected
386 to a coherent interconnect.
388 If a Cortex-A53 processor is executing a store or prefetch for
389 write instruction at the same time as a processor in another
390 cluster is executing a cache maintenance operation to the same
391 address, then this erratum might cause a clean cache line to be
392 incorrectly marked as dirty.
394 The workaround promotes data cache clean instructions to
395 data cache clean-and-invalidate.
396 Please note that this option does not necessarily enable the
397 workaround, as it depends on the alternative framework, which will
398 only patch the kernel if an affected CPU is detected.
402 config ARM64_ERRATUM_819472
403 bool "Cortex-A53: 819472: Store exclusive instructions might cause data corruption"
405 select ARM64_WORKAROUND_CLEAN_CACHE
407 This option adds an alternative code sequence to work around ARM
408 erratum 819472 on Cortex-A53 parts up to r0p1 with an L2 cache
409 present when it is connected to a coherent interconnect.
411 If the processor is executing a load and store exclusive sequence at
412 the same time as a processor in another cluster is executing a cache
413 maintenance operation to the same address, then this erratum might
414 cause data corruption.
416 The workaround promotes data cache clean instructions to
417 data cache clean-and-invalidate.
418 Please note that this does not necessarily enable the workaround,
419 as it depends on the alternative framework, which will only patch
420 the kernel if an affected CPU is detected.
424 config ARM64_ERRATUM_832075
425 bool "Cortex-A57: 832075: possible deadlock on mixing exclusive memory accesses with device loads"
428 This option adds an alternative code sequence to work around ARM
429 erratum 832075 on Cortex-A57 parts up to r1p2.
431 Affected Cortex-A57 parts might deadlock when exclusive load/store
432 instructions to Write-Back memory are mixed with Device loads.
434 The workaround is to promote device loads to use Load-Acquire
436 Please note that this does not necessarily enable the workaround,
437 as it depends on the alternative framework, which will only patch
438 the kernel if an affected CPU is detected.
442 config ARM64_ERRATUM_834220
443 bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault"
447 This option adds an alternative code sequence to work around ARM
448 erratum 834220 on Cortex-A57 parts up to r1p2.
450 Affected Cortex-A57 parts might report a Stage 2 translation
451 fault as the result of a Stage 1 fault for load crossing a
452 page boundary when there is a permission or device memory
453 alignment fault at Stage 1 and a translation fault at Stage 2.
455 The workaround is to verify that the Stage 1 translation
456 doesn't generate a fault before handling the Stage 2 fault.
457 Please note that this does not necessarily enable the workaround,
458 as it depends on the alternative framework, which will only patch
459 the kernel if an affected CPU is detected.
463 config ARM64_ERRATUM_845719
464 bool "Cortex-A53: 845719: a load might read incorrect data"
468 This option adds an alternative code sequence to work around ARM
469 erratum 845719 on Cortex-A53 parts up to r0p4.
471 When running a compat (AArch32) userspace on an affected Cortex-A53
472 part, a load at EL0 from a virtual address that matches the bottom 32
473 bits of the virtual address used by a recent load at (AArch64) EL1
474 might return incorrect data.
476 The workaround is to write the contextidr_el1 register on exception
477 return to a 32-bit task.
478 Please note that this does not necessarily enable the workaround,
479 as it depends on the alternative framework, which will only patch
480 the kernel if an affected CPU is detected.
484 config ARM64_ERRATUM_843419
485 bool "Cortex-A53: 843419: A load or store might access an incorrect address"
487 select ARM64_MODULE_PLTS if MODULES
489 This option links the kernel with '--fix-cortex-a53-843419' and
490 enables PLT support to replace certain ADRP instructions, which can
491 cause subsequent memory accesses to use an incorrect address on
492 Cortex-A53 parts up to r0p4.
496 config ARM64_ERRATUM_1024718
497 bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update"
500 This option adds a workaround for ARM Cortex-A55 Erratum 1024718.
502 Affected Cortex-A55 cores (r0p0, r0p1, r1p0) could cause incorrect
503 update of the hardware dirty bit when the DBM/AP bits are updated
504 without a break-before-make. The workaround is to disable the usage
505 of hardware DBM locally on the affected cores. CPUs not affected by
506 this erratum will continue to use the feature.
510 config ARM64_ERRATUM_1418040
511 bool "Cortex-A76/Neoverse-N1: MRC read following MRRC read of specific Generic Timer in AArch32 might give incorrect result"
515 This option adds a workaround for ARM Cortex-A76/Neoverse-N1
516 errata 1188873 and 1418040.
518 Affected Cortex-A76/Neoverse-N1 cores (r0p0 to r3p1) could
519 cause register corruption when accessing the timer registers
520 from AArch32 userspace.
524 config ARM64_WORKAROUND_SPECULATIVE_AT_VHE
527 config ARM64_ERRATUM_1165522
528 bool "Cortex-A76: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation"
530 select ARM64_WORKAROUND_SPECULATIVE_AT_VHE
532 This option adds a workaround for ARM Cortex-A76 erratum 1165522.
534 Affected Cortex-A76 cores (r0p0, r1p0, r2p0) could end-up with
535 corrupted TLBs by speculating an AT instruction during a guest
540 config ARM64_ERRATUM_1530923
541 bool "Cortex-A55: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation"
543 select ARM64_WORKAROUND_SPECULATIVE_AT_VHE
545 This option adds a workaround for ARM Cortex-A55 erratum 1530923.
547 Affected Cortex-A55 cores (r0p0, r0p1, r1p0, r2p0) could end-up with
548 corrupted TLBs by speculating an AT instruction during a guest
553 config ARM64_ERRATUM_1286807
554 bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
556 select ARM64_WORKAROUND_REPEAT_TLBI
558 This option adds a workaround for ARM Cortex-A76 erratum 1286807.
560 On the affected Cortex-A76 cores (r0p0 to r3p0), if a virtual
561 address for a cacheable mapping of a location is being
562 accessed by a core while another core is remapping the virtual
563 address to a new physical page using the recommended
564 break-before-make sequence, then under very rare circumstances
565 TLBI+DSB completes before a read using the translation being
566 invalidated has been observed by other observers. The
567 workaround repeats the TLBI+DSB operation.
569 config ARM64_WORKAROUND_SPECULATIVE_AT_NVHE
572 config ARM64_ERRATUM_1319367
573 bool "Cortex-A57/A72: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation"
575 select ARM64_WORKAROUND_SPECULATIVE_AT_NVHE
577 This option adds work arounds for ARM Cortex-A57 erratum 1319537
578 and A72 erratum 1319367
580 Cortex-A57 and A72 cores could end-up with corrupted TLBs by
581 speculating an AT instruction during a guest context switch.
585 config ARM64_ERRATUM_1463225
586 bool "Cortex-A76: Software Step might prevent interrupt recognition"
589 This option adds a workaround for Arm Cortex-A76 erratum 1463225.
591 On the affected Cortex-A76 cores (r0p0 to r3p1), software stepping
592 of a system call instruction (SVC) can prevent recognition of
593 subsequent interrupts when software stepping is disabled in the
594 exception handler of the system call and either kernel debugging
595 is enabled or VHE is in use.
597 Work around the erratum by triggering a dummy step exception
598 when handling a system call from a task that is being stepped
599 in a VHE configuration of the kernel.
603 config ARM64_ERRATUM_1542419
604 bool "Neoverse-N1: workaround mis-ordering of instruction fetches"
607 This option adds a workaround for ARM Neoverse-N1 erratum
610 Affected Neoverse-N1 cores could execute a stale instruction when
611 modified by another CPU. The workaround depends on a firmware
614 Workaround the issue by hiding the DIC feature from EL0. This
615 forces user-space to perform cache maintenance.
619 config CAVIUM_ERRATUM_22375
620 bool "Cavium erratum 22375, 24313"
623 Enable workaround for errata 22375 and 24313.
625 This implements two gicv3-its errata workarounds for ThunderX. Both
626 with a small impact affecting only ITS table allocation.
628 erratum 22375: only alloc 8MB table size
629 erratum 24313: ignore memory access type
631 The fixes are in ITS initialization and basically ignore memory access
632 type and table size provided by the TYPER and BASER registers.
636 config CAVIUM_ERRATUM_23144
637 bool "Cavium erratum 23144: ITS SYNC hang on dual socket system"
641 ITS SYNC command hang for cross node io and collections/cpu mapping.
645 config CAVIUM_ERRATUM_23154
646 bool "Cavium erratum 23154: Access to ICC_IAR1_EL1 is not sync'ed"
649 The gicv3 of ThunderX requires a modified version for
650 reading the IAR status to ensure data synchronization
651 (access to icc_iar1_el1 is not sync'ed before and after).
655 config CAVIUM_ERRATUM_27456
656 bool "Cavium erratum 27456: Broadcast TLBI instructions may cause icache corruption"
659 On ThunderX T88 pass 1.x through 2.1 parts, broadcast TLBI
660 instructions may cause the icache to become corrupted if it
661 contains data for a non-current ASID. The fix is to
662 invalidate the icache when changing the mm context.
666 config CAVIUM_ERRATUM_30115
667 bool "Cavium erratum 30115: Guest may disable interrupts in host"
670 On ThunderX T88 pass 1.x through 2.2, T81 pass 1.0 through
671 1.2, and T83 Pass 1.0, KVM guest execution may disable
672 interrupts in host. Trapping both GICv3 group-0 and group-1
673 accesses sidesteps the issue.
677 config CAVIUM_TX2_ERRATUM_219
678 bool "Cavium ThunderX2 erratum 219: PRFM between TTBR change and ISB fails"
681 On Cavium ThunderX2, a load, store or prefetch instruction between a
682 TTBR update and the corresponding context synchronizing operation can
683 cause a spurious Data Abort to be delivered to any hardware thread in
686 Work around the issue by avoiding the problematic code sequence and
687 trapping KVM guest TTBRx_EL1 writes to EL2 when SMT is enabled. The
688 trap handler performs the corresponding register access, skips the
689 instruction and ensures context synchronization by virtue of the
694 config QCOM_FALKOR_ERRATUM_1003
695 bool "Falkor E1003: Incorrect translation due to ASID change"
698 On Falkor v1, an incorrect ASID may be cached in the TLB when ASID
699 and BADDR are changed together in TTBRx_EL1. Since we keep the ASID
700 in TTBR1_EL1, this situation only occurs in the entry trampoline and
701 then only for entries in the walk cache, since the leaf translation
702 is unchanged. Work around the erratum by invalidating the walk cache
703 entries for the trampoline before entering the kernel proper.
705 config ARM64_WORKAROUND_REPEAT_TLBI
708 config QCOM_FALKOR_ERRATUM_1009
709 bool "Falkor E1009: Prematurely complete a DSB after a TLBI"
711 select ARM64_WORKAROUND_REPEAT_TLBI
713 On Falkor v1, the CPU may prematurely complete a DSB following a
714 TLBI xxIS invalidate maintenance operation. Repeat the TLBI operation
715 one more time to fix the issue.
719 config QCOM_QDF2400_ERRATUM_0065
720 bool "QDF2400 E0065: Incorrect GITS_TYPER.ITT_Entry_size"
723 On Qualcomm Datacenter Technologies QDF2400 SoC, ITS hardware reports
724 ITE size incorrectly. The GITS_TYPER.ITT_Entry_size field should have
725 been indicated as 16Bytes (0xf), not 8Bytes (0x7).
729 config SOCIONEXT_SYNQUACER_PREITS
730 bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
733 Socionext Synquacer SoCs implement a separate h/w block to generate
734 MSI doorbell writes with non-zero values for the device ID.
738 config HISILICON_ERRATUM_161600802
739 bool "Hip07 161600802: Erroneous redistributor VLPI base"
742 The HiSilicon Hip07 SoC uses the wrong redistributor base
743 when issued ITS commands such as VMOVP and VMAPP, and requires
744 a 128kB offset to be applied to the target address in this commands.
748 config QCOM_FALKOR_ERRATUM_E1041
749 bool "Falkor E1041: Speculative instruction fetches might cause errant memory access"
752 Falkor CPU may speculatively fetch instructions from an improper
753 memory location when MMU translation is changed from SCTLR_ELn[M]=1
754 to SCTLR_ELn[M]=0. Prefix an ISB instruction to fix the problem.
758 config FUJITSU_ERRATUM_010001
759 bool "Fujitsu-A64FX erratum E#010001: Undefined fault may occur wrongly"
762 This option adds a workaround for Fujitsu-A64FX erratum E#010001.
763 On some variants of the Fujitsu-A64FX cores ver(1.0, 1.1), memory
764 accesses may cause undefined fault (Data abort, DFSC=0b111111).
765 This fault occurs under a specific hardware condition when a
766 load/store instruction performs an address translation using:
767 case-1 TTBR0_EL1 with TCR_EL1.NFD0 == 1.
768 case-2 TTBR0_EL2 with TCR_EL2.NFD0 == 1.
769 case-3 TTBR1_EL1 with TCR_EL1.NFD1 == 1.
770 case-4 TTBR1_EL2 with TCR_EL2.NFD1 == 1.
772 The workaround is to ensure these bits are clear in TCR_ELx.
773 The workaround only affects the Fujitsu-A64FX.
782 default ARM64_4K_PAGES
784 Page size (translation granule) configuration.
786 config ARM64_4K_PAGES
789 This feature enables 4KB pages support.
791 config ARM64_16K_PAGES
794 The system will use 16KB pages support. AArch32 emulation
795 requires applications compiled with 16K (or a multiple of 16K)
798 config ARM64_64K_PAGES
801 This feature enables 64KB pages support (4KB by default)
802 allowing only two levels of page tables and faster TLB
803 look-up. AArch32 emulation requires applications compiled
804 with 64K aligned segments.
809 prompt "Virtual address space size"
810 default ARM64_VA_BITS_39 if ARM64_4K_PAGES
811 default ARM64_VA_BITS_47 if ARM64_16K_PAGES
812 default ARM64_VA_BITS_42 if ARM64_64K_PAGES
814 Allows choosing one of multiple possible virtual address
815 space sizes. The level of translation table is determined by
816 a combination of page size and virtual address space size.
818 config ARM64_VA_BITS_36
819 bool "36-bit" if EXPERT
820 depends on ARM64_16K_PAGES
822 config ARM64_VA_BITS_39
824 depends on ARM64_4K_PAGES
826 config ARM64_VA_BITS_42
828 depends on ARM64_64K_PAGES
830 config ARM64_VA_BITS_47
832 depends on ARM64_16K_PAGES
834 config ARM64_VA_BITS_48
837 config ARM64_VA_BITS_52
839 depends on ARM64_64K_PAGES && (ARM64_PAN || !ARM64_SW_TTBR0_PAN)
841 Enable 52-bit virtual addressing for userspace when explicitly
842 requested via a hint to mmap(). The kernel will also use 52-bit
843 virtual addresses for its own mappings (provided HW support for
844 this feature is available, otherwise it reverts to 48-bit).
846 NOTE: Enabling 52-bit virtual addressing in conjunction with
847 ARMv8.3 Pointer Authentication will result in the PAC being
848 reduced from 7 bits to 3 bits, which may have a significant
849 impact on its susceptibility to brute-force attacks.
851 If unsure, select 48-bit virtual addressing instead.
855 config ARM64_FORCE_52BIT
856 bool "Force 52-bit virtual addresses for userspace"
857 depends on ARM64_VA_BITS_52 && EXPERT
859 For systems with 52-bit userspace VAs enabled, the kernel will attempt
860 to maintain compatibility with older software by providing 48-bit VAs
861 unless a hint is supplied to mmap.
863 This configuration option disables the 48-bit compatibility logic, and
864 forces all userspace addresses to be 52-bit on HW that supports it. One
865 should only enable this configuration option for stress testing userspace
866 memory management code. If unsure say N here.
870 default 36 if ARM64_VA_BITS_36
871 default 39 if ARM64_VA_BITS_39
872 default 42 if ARM64_VA_BITS_42
873 default 47 if ARM64_VA_BITS_47
874 default 48 if ARM64_VA_BITS_48
875 default 52 if ARM64_VA_BITS_52
878 prompt "Physical address space size"
879 default ARM64_PA_BITS_48
881 Choose the maximum physical address range that the kernel will
884 config ARM64_PA_BITS_48
887 config ARM64_PA_BITS_52
888 bool "52-bit (ARMv8.2)"
889 depends on ARM64_64K_PAGES
890 depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
892 Enable support for a 52-bit physical address space, introduced as
893 part of the ARMv8.2-LPA extension.
895 With this enabled, the kernel will also continue to work on CPUs that
896 do not support ARMv8.2-LPA, but with some added memory overhead (and
897 minor performance overhead).
903 default 48 if ARM64_PA_BITS_48
904 default 52 if ARM64_PA_BITS_52
908 default CPU_LITTLE_ENDIAN
910 Select the endianness of data accesses performed by the CPU. Userspace
911 applications will need to be compiled and linked for the endianness
912 that is selected here.
914 config CPU_BIG_ENDIAN
915 bool "Build big-endian kernel"
917 Say Y if you plan on running a kernel with a big-endian userspace.
919 config CPU_LITTLE_ENDIAN
920 bool "Build little-endian kernel"
922 Say Y if you plan on running a kernel with a little-endian userspace.
923 This is usually the case for distributions targeting arm64.
928 bool "Multi-core scheduler support"
930 Multi-core scheduler support improves the CPU scheduler's decision
931 making when dealing with multi-core CPU chips at a cost of slightly
932 increased overhead in some places. If unsure say N here.
935 bool "SMT scheduler support"
937 Improves the CPU scheduler's decision making when dealing with
938 MultiThreading at a cost of slightly increased overhead in some
939 places. If unsure say N here.
942 int "Maximum number of CPUs (2-4096)"
947 bool "Support for hot-pluggable CPUs"
948 select GENERIC_IRQ_MIGRATION
950 Say Y here to experiment with turning CPUs off and on. CPUs
951 can be controlled through /sys/devices/system/cpu.
953 # Common NUMA Features
955 bool "Numa Memory Allocation and Scheduler Support"
956 select ACPI_NUMA if ACPI
959 Enable NUMA (Non Uniform Memory Access) support.
961 The kernel will try to allocate memory used by a CPU on the
962 local memory of the CPU and add some more
963 NUMA awareness to the kernel.
966 int "Maximum NUMA Nodes (as a power of 2)"
969 depends on NEED_MULTIPLE_NODES
971 Specify the maximum number of NUMA Nodes available on the target
972 system. Increases memory reserved to accommodate various tables.
974 config USE_PERCPU_NUMA_NODE_ID
978 config HAVE_SETUP_PER_CPU_AREA
982 config NEED_PER_CPU_EMBED_FIRST_CHUNK
989 source "kernel/Kconfig.hz"
991 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
994 config ARCH_SPARSEMEM_ENABLE
996 select SPARSEMEM_VMEMMAP_ENABLE
998 config ARCH_SPARSEMEM_DEFAULT
999 def_bool ARCH_SPARSEMEM_ENABLE
1001 config ARCH_SELECT_MEMORY_MODEL
1002 def_bool ARCH_SPARSEMEM_ENABLE
1004 config ARCH_FLATMEM_ENABLE
1007 config HAVE_ARCH_PFN_VALID
1010 config HW_PERF_EVENTS
1014 config SYS_SUPPORTS_HUGETLBFS
1017 config ARCH_WANT_HUGE_PMD_SHARE
1019 config ARCH_HAS_CACHE_LINE_SIZE
1022 config ARCH_ENABLE_SPLIT_PMD_PTLOCK
1023 def_bool y if PGTABLE_LEVELS > 2
1026 bool "Enable seccomp to safely compute untrusted bytecode"
1028 This kernel feature is useful for number crunching applications
1029 that may need to compute untrusted bytecode during their
1030 execution. By using pipes or other transports made available to
1031 the process as file descriptors supporting the read/write
1032 syscalls, it's possible to isolate those applications in
1033 their own address space using seccomp. Once seccomp is
1034 enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
1035 and the task is only allowed to execute a few safe syscalls
1036 defined by each seccomp mode.
1039 bool "Enable paravirtualization code"
1041 This changes the kernel so it can modify itself when it is run
1042 under a hypervisor, potentially improving performance significantly
1043 over full virtualization.
1045 config PARAVIRT_TIME_ACCOUNTING
1046 bool "Paravirtual steal time accounting"
1049 Select this option to enable fine granularity task steal time
1050 accounting. Time spent executing other tasks in parallel with
1051 the current vCPU is discounted from the vCPU power. To account for
1052 that, there can be a small performance impact.
1054 If in doubt, say N here.
1057 depends on PM_SLEEP_SMP
1059 bool "kexec system call"
1061 kexec is a system call that implements the ability to shutdown your
1062 current kernel, and to start another kernel. It is like a reboot
1063 but it is independent of the system firmware. And like a reboot
1064 you can start any kernel with it, not just Linux.
1067 bool "kexec file based system call"
1070 This is new version of kexec system call. This system call is
1071 file based and takes file descriptors as system call argument
1072 for kernel and initramfs as opposed to list of segments as
1073 accepted by previous system call.
1076 bool "Verify kernel signature during kexec_file_load() syscall"
1077 depends on KEXEC_FILE
1079 Select this option to verify a signature with loaded kernel
1080 image. If configured, any attempt of loading a image without
1081 valid signature will fail.
1083 In addition to that option, you need to enable signature
1084 verification for the corresponding kernel image type being
1085 loaded in order for this to work.
1087 config KEXEC_IMAGE_VERIFY_SIG
1088 bool "Enable Image signature verification support"
1090 depends on KEXEC_SIG
1091 depends on EFI && SIGNED_PE_FILE_VERIFICATION
1093 Enable Image signature verification support.
1095 comment "Support for PE file signature verification disabled"
1096 depends on KEXEC_SIG
1097 depends on !EFI || !SIGNED_PE_FILE_VERIFICATION
1100 bool "Build kdump crash kernel"
1102 Generate crash dump after being started by kexec. This should
1103 be normally only set in special crash dump kernels which are
1104 loaded in the main kernel with kexec-tools into a specially
1105 reserved region and then later executed after a crash by
1108 For more details see Documentation/admin-guide/kdump/kdump.rst
1115 bool "Xen guest support on ARM64"
1116 depends on ARM64 && OF
1120 Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.
1122 config FORCE_MAX_ZONEORDER
1124 default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE)
1125 default "12" if (ARM64_16K_PAGES && TRANSPARENT_HUGEPAGE)
1128 The kernel memory allocator divides physically contiguous memory
1129 blocks into "zones", where each zone is a power of two number of
1130 pages. This option selects the largest power of two that the kernel
1131 keeps in the memory allocator. If you need to allocate very large
1132 blocks of physically contiguous memory, then you may need to
1133 increase this value.
1135 This config option is actually maximum order plus one. For example,
1136 a value of 11 means that the largest free memory block is 2^10 pages.
1138 We make sure that we can allocate upto a HugePage size for each configuration.
1140 MAX_ORDER = (PMD_SHIFT - PAGE_SHIFT) + 1 => PAGE_SHIFT - 2
1142 However for 4K, we choose a higher default value, 11 as opposed to 10, giving us
1143 4M allocations matching the default size used by generic code.
1145 config UNMAP_KERNEL_AT_EL0
1146 bool "Unmap kernel when running in userspace (aka \"KAISER\")" if EXPERT
1149 Speculation attacks against some high-performance processors can
1150 be used to bypass MMU permission checks and leak kernel data to
1151 userspace. This can be defended against by unmapping the kernel
1152 when running in userspace, mapping it back in on exception entry
1153 via a trampoline page in the vector table.
1157 config HARDEN_BRANCH_PREDICTOR
1158 bool "Harden the branch predictor against aliasing attacks" if EXPERT
1161 Speculation attacks against some high-performance processors rely on
1162 being able to manipulate the branch predictor for a victim context by
1163 executing aliasing branches in the attacker context. Such attacks
1164 can be partially mitigated against by clearing internal branch
1165 predictor state and limiting the prediction logic in some situations.
1167 This config option will take CPU-specific actions to harden the
1168 branch predictor against aliasing attacks and may rely on specific
1169 instruction sequences or control bits being set by the system
1174 config HARDEN_EL2_VECTORS
1175 bool "Harden EL2 vector mapping against system register leak" if EXPERT
1178 Speculation attacks against some high-performance processors can
1179 be used to leak privileged information such as the vector base
1180 register, resulting in a potential defeat of the EL2 layout
1183 This config option will map the vectors to a fixed location,
1184 independent of the EL2 code mapping, so that revealing VBAR_EL2
1185 to an attacker does not give away any extra information. This
1186 only gets enabled on affected CPUs.
1191 bool "Speculative Store Bypass Disable" if EXPERT
1194 This enables mitigation of the bypassing of previous stores
1195 by speculative loads.
1199 config RODATA_FULL_DEFAULT_ENABLED
1200 bool "Apply r/o permissions of VM areas also to their linear aliases"
1203 Apply read-only attributes of VM areas to the linear alias of
1204 the backing pages as well. This prevents code or read-only data
1205 from being modified (inadvertently or intentionally) via another
1206 mapping of the same memory page. This additional enhancement can
1207 be turned off at runtime by passing rodata=[off|on] (and turned on
1208 with rodata=full if this option is set to 'n')
1210 This requires the linear region to be mapped down to pages,
1211 which may adversely affect performance in some cases.
1213 config ARM64_SW_TTBR0_PAN
1214 bool "Emulate Privileged Access Never using TTBR0_EL1 switching"
1216 Enabling this option prevents the kernel from accessing
1217 user-space memory directly by pointing TTBR0_EL1 to a reserved
1218 zeroed area and reserved ASID. The user access routines
1219 restore the valid TTBR0_EL1 temporarily.
1221 config ARM64_TAGGED_ADDR_ABI
1222 bool "Enable the tagged user addresses syscall ABI"
1225 When this option is enabled, user applications can opt in to a
1226 relaxed ABI via prctl() allowing tagged addresses to be passed
1227 to system calls as pointer arguments. For details, see
1228 Documentation/arm64/tagged-address-abi.rst.
1231 bool "Kernel support for 32-bit EL0"
1232 depends on ARM64_4K_PAGES || EXPERT
1233 select COMPAT_BINFMT_ELF if BINFMT_ELF
1235 select OLD_SIGSUSPEND3
1236 select COMPAT_OLD_SIGACTION
1238 This option enables support for a 32-bit EL0 running under a 64-bit
1239 kernel at EL1. AArch32-specific components such as system calls,
1240 the user helper functions, VFP support and the ptrace interface are
1241 handled appropriately by the kernel.
1243 If you use a page size other than 4KB (i.e, 16KB or 64KB), please be aware
1244 that you will only be able to execute AArch32 binaries that were compiled
1245 with page size aligned segments.
1247 If you want to execute 32-bit userspace applications, say Y.
1251 config KUSER_HELPERS
1252 bool "Enable kuser helpers page for 32-bit applications"
1255 Warning: disabling this option may break 32-bit user programs.
1257 Provide kuser helpers to compat tasks. The kernel provides
1258 helper code to userspace in read only form at a fixed location
1259 to allow userspace to be independent of the CPU type fitted to
1260 the system. This permits binaries to be run on ARMv4 through
1261 to ARMv8 without modification.
1263 See Documentation/arm/kernel_user_helpers.rst for details.
1265 However, the fixed address nature of these helpers can be used
1266 by ROP (return orientated programming) authors when creating
1269 If all of the binaries and libraries which run on your platform
1270 are built specifically for your platform, and make no use of
1271 these helpers, then you can turn this option off to hinder
1272 such exploits. However, in that case, if a binary or library
1273 relying on those helpers is run, it will not function correctly.
1275 Say N here only if you are absolutely certain that you do not
1276 need these helpers; otherwise, the safe option is to say Y.
1279 bool "Enable vDSO for 32-bit applications"
1280 depends on !CPU_BIG_ENDIAN && "$(CROSS_COMPILE_COMPAT)" != ""
1281 select GENERIC_COMPAT_VDSO
1284 Place in the process address space of 32-bit applications an
1285 ELF shared object providing fast implementations of gettimeofday
1288 You must have a 32-bit build of glibc 2.22 or later for programs
1289 to seamlessly take advantage of this.
1291 menuconfig ARMV8_DEPRECATED
1292 bool "Emulate deprecated/obsolete ARMv8 instructions"
1295 Legacy software support may require certain instructions
1296 that have been deprecated or obsoleted in the architecture.
1298 Enable this config to enable selective emulation of these
1305 config SWP_EMULATION
1306 bool "Emulate SWP/SWPB instructions"
1308 ARMv8 obsoletes the use of A32 SWP/SWPB instructions such that
1309 they are always undefined. Say Y here to enable software
1310 emulation of these instructions for userspace using LDXR/STXR.
1312 In some older versions of glibc [<=2.8] SWP is used during futex
1313 trylock() operations with the assumption that the code will not
1314 be preempted. This invalid assumption may be more likely to fail
1315 with SWP emulation enabled, leading to deadlock of the user
1318 NOTE: when accessing uncached shared regions, LDXR/STXR rely
1319 on an external transaction monitoring block called a global
1320 monitor to maintain update atomicity. If your system does not
1321 implement a global monitor, this option can cause programs that
1322 perform SWP operations to uncached memory to deadlock.
1326 config CP15_BARRIER_EMULATION
1327 bool "Emulate CP15 Barrier instructions"
1329 The CP15 barrier instructions - CP15ISB, CP15DSB, and
1330 CP15DMB - are deprecated in ARMv8 (and ARMv7). It is
1331 strongly recommended to use the ISB, DSB, and DMB
1332 instructions instead.
1334 Say Y here to enable software emulation of these
1335 instructions for AArch32 userspace code. When this option is
1336 enabled, CP15 barrier usage is traced which can help
1337 identify software that needs updating.
1341 config SETEND_EMULATION
1342 bool "Emulate SETEND instruction"
1344 The SETEND instruction alters the data-endianness of the
1345 AArch32 EL0, and is deprecated in ARMv8.
1347 Say Y here to enable software emulation of the instruction
1348 for AArch32 userspace code.
1350 Note: All the cpus on the system must have mixed endian support at EL0
1351 for this feature to be enabled. If a new CPU - which doesn't support mixed
1352 endian - is hotplugged in after this feature has been enabled, there could
1353 be unexpected results in the applications.
1360 menu "ARMv8.1 architectural features"
1362 config ARM64_HW_AFDBM
1363 bool "Support for hardware updates of the Access and Dirty page flags"
1366 The ARMv8.1 architecture extensions introduce support for
1367 hardware updates of the access and dirty information in page
1368 table entries. When enabled in TCR_EL1 (HA and HD bits) on
1369 capable processors, accesses to pages with PTE_AF cleared will
1370 set this bit instead of raising an access flag fault.
1371 Similarly, writes to read-only pages with the DBM bit set will
1372 clear the read-only bit (AP[2]) instead of raising a
1375 Kernels built with this configuration option enabled continue
1376 to work on pre-ARMv8.1 hardware and the performance impact is
1377 minimal. If unsure, say Y.
1380 bool "Enable support for Privileged Access Never (PAN)"
1383 Privileged Access Never (PAN; part of the ARMv8.1 Extensions)
1384 prevents the kernel or hypervisor from accessing user-space (EL0)
1387 Choosing this option will cause any unprotected (not using
1388 copy_to_user et al) memory access to fail with a permission fault.
1390 The feature is detected at runtime, and will remain as a 'nop'
1391 instruction if the cpu does not implement the feature.
1393 config ARM64_LSE_ATOMICS
1395 default ARM64_USE_LSE_ATOMICS
1396 depends on $(as-instr,.arch_extension lse)
1398 config ARM64_USE_LSE_ATOMICS
1399 bool "Atomic instructions"
1400 depends on JUMP_LABEL
1403 As part of the Large System Extensions, ARMv8.1 introduces new
1404 atomic instructions that are designed specifically to scale in
1407 Say Y here to make use of these instructions for the in-kernel
1408 atomic routines. This incurs a small overhead on CPUs that do
1409 not support these instructions and requires the kernel to be
1410 built with binutils >= 2.25 in order for the new instructions
1414 bool "Enable support for Virtualization Host Extensions (VHE)"
1417 Virtualization Host Extensions (VHE) allow the kernel to run
1418 directly at EL2 (instead of EL1) on processors that support
1419 it. This leads to better performance for KVM, as they reduce
1420 the cost of the world switch.
1422 Selecting this option allows the VHE feature to be detected
1423 at runtime, and does not affect processors that do not
1424 implement this feature.
1428 menu "ARMv8.2 architectural features"
1431 bool "Enable support for User Access Override (UAO)"
1434 User Access Override (UAO; part of the ARMv8.2 Extensions)
1435 causes the 'unprivileged' variant of the load/store instructions to
1436 be overridden to be privileged.
1438 This option changes get_user() and friends to use the 'unprivileged'
1439 variant of the load/store instructions. This ensures that user-space
1440 really did have access to the supplied memory. When addr_limit is
1441 set to kernel memory the UAO bit will be set, allowing privileged
1442 access to kernel memory.
1444 Choosing this option will cause copy_to_user() et al to use user-space
1447 The feature is detected at runtime, the kernel will use the
1448 regular load/store instructions if the cpu does not implement the
1452 bool "Enable support for persistent memory"
1453 select ARCH_HAS_PMEM_API
1454 select ARCH_HAS_UACCESS_FLUSHCACHE
1456 Say Y to enable support for the persistent memory API based on the
1457 ARMv8.2 DCPoP feature.
1459 The feature is detected at runtime, and the kernel will use DC CVAC
1460 operations if DC CVAP is not supported (following the behaviour of
1461 DC CVAP itself if the system does not define a point of persistence).
1463 config ARM64_RAS_EXTN
1464 bool "Enable support for RAS CPU Extensions"
1467 CPUs that support the Reliability, Availability and Serviceability
1468 (RAS) Extensions, part of ARMv8.2 are able to track faults and
1469 errors, classify them and report them to software.
1471 On CPUs with these extensions system software can use additional
1472 barriers to determine if faults are pending and read the
1473 classification from a new set of registers.
1475 Selecting this feature will allow the kernel to use these barriers
1476 and access the new registers if the system supports the extension.
1477 Platform RAS features may additionally depend on firmware support.
1480 bool "Enable support for Common Not Private (CNP) translations"
1482 depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
1484 Common Not Private (CNP) allows translation table entries to
1485 be shared between different PEs in the same inner shareable
1486 domain, so the hardware can use this fact to optimise the
1487 caching of such entries in the TLB.
1489 Selecting this option allows the CNP feature to be detected
1490 at runtime, and does not affect PEs that do not implement
1495 menu "ARMv8.3 architectural features"
1497 config ARM64_PTR_AUTH
1498 bool "Enable support for pointer authentication"
1500 depends on !KVM || ARM64_VHE
1502 Pointer authentication (part of the ARMv8.3 Extensions) provides
1503 instructions for signing and authenticating pointers against secret
1504 keys, which can be used to mitigate Return Oriented Programming (ROP)
1507 This option enables these instructions at EL0 (i.e. for userspace).
1509 Choosing this option will cause the kernel to initialise secret keys
1510 for each process at exec() time, with these keys being
1511 context-switched along with the process.
1513 The feature is detected at runtime. If the feature is not present in
1514 hardware it will not be advertised to userspace/KVM guest nor will it
1515 be enabled. However, KVM guest also require VHE mode and hence
1516 CONFIG_ARM64_VHE=y option to use this feature.
1520 menu "ARMv8.5 architectural features"
1523 bool "Enable support for E0PD"
1526 E0PD (part of the ARMv8.5 extensions) allows us to ensure
1527 that EL0 accesses made via TTBR1 always fault in constant time,
1528 providing similar benefits to KASLR as those provided by KPTI, but
1529 with lower overhead and without disrupting legitimate access to
1530 kernel memory such as SPE.
1532 This option enables E0PD for TTBR1 where available.
1535 bool "Enable support for random number generation"
1538 Random number generation (part of the ARMv8.5 Extensions)
1539 provides a high bandwidth, cryptographically secure
1540 hardware random number generator.
1545 bool "ARM Scalable Vector Extension support"
1547 depends on !KVM || ARM64_VHE
1549 The Scalable Vector Extension (SVE) is an extension to the AArch64
1550 execution state which complements and extends the SIMD functionality
1551 of the base architecture to support much larger vectors and to enable
1552 additional vectorisation opportunities.
1554 To enable use of this extension on CPUs that implement it, say Y.
1556 On CPUs that support the SVE2 extensions, this option will enable
1559 Note that for architectural reasons, firmware _must_ implement SVE
1560 support when running on SVE capable hardware. The required support
1563 * version 1.5 and later of the ARM Trusted Firmware
1564 * the AArch64 boot wrapper since commit 5e1261e08abf
1565 ("bootwrapper: SVE: Enable SVE for EL2 and below").
1567 For other firmware implementations, consult the firmware documentation
1570 If you need the kernel to boot on SVE-capable hardware with broken
1571 firmware, you may need to say N here until you get your firmware
1572 fixed. Otherwise, you may experience firmware panics or lockups when
1573 booting the kernel. If unsure and you are not observing these
1574 symptoms, you should assume that it is safe to say Y.
1576 CPUs that support SVE are architecturally required to support the
1577 Virtualization Host Extensions (VHE), so the kernel makes no
1578 provision for supporting SVE alongside KVM without VHE enabled.
1579 Thus, you will need to enable CONFIG_ARM64_VHE if you want to support
1580 KVM in the same kernel image.
1582 config ARM64_MODULE_PLTS
1583 bool "Use PLTs to allow module memory to spill over into vmalloc area"
1585 select HAVE_MOD_ARCH_SPECIFIC
1587 Allocate PLTs when loading modules so that jumps and calls whose
1588 targets are too far away for their relative offsets to be encoded
1589 in the instructions themselves can be bounced via veneers in the
1590 module's PLT. This allows modules to be allocated in the generic
1591 vmalloc area after the dedicated module memory area has been
1594 When running with address space randomization (KASLR), the module
1595 region itself may be too far away for ordinary relative jumps and
1596 calls, and so in that case, module PLTs are required and cannot be
1599 Specific errata workaround(s) might also force module PLTs to be
1600 enabled (ARM64_ERRATUM_843419).
1602 config ARM64_PSEUDO_NMI
1603 bool "Support for NMI-like interrupts"
1606 Adds support for mimicking Non-Maskable Interrupts through the use of
1607 GIC interrupt priority. This support requires version 3 or later of
1610 This high priority configuration for interrupts needs to be
1611 explicitly enabled by setting the kernel parameter
1612 "irqchip.gicv3_pseudo_nmi" to 1.
1617 config ARM64_DEBUG_PRIORITY_MASKING
1618 bool "Debug interrupt priority masking"
1620 This adds runtime checks to functions enabling/disabling
1621 interrupts when using priority masking. The additional checks verify
1622 the validity of ICC_PMR_EL1 when calling concerned functions.
1629 select ARCH_HAS_RELR
1631 This builds the kernel as a Position Independent Executable (PIE),
1632 which retains all relocation metadata required to relocate the
1633 kernel binary at runtime to a different virtual address than the
1634 address it was linked at.
1635 Since AArch64 uses the RELA relocation format, this requires a
1636 relocation pass at runtime even if the kernel is loaded at the
1637 same address it was linked at.
1639 config RANDOMIZE_BASE
1640 bool "Randomize the address of the kernel image"
1641 select ARM64_MODULE_PLTS if MODULES
1644 Randomizes the virtual address at which the kernel image is
1645 loaded, as a security feature that deters exploit attempts
1646 relying on knowledge of the location of kernel internals.
1648 It is the bootloader's job to provide entropy, by passing a
1649 random u64 value in /chosen/kaslr-seed at kernel entry.
1651 When booting via the UEFI stub, it will invoke the firmware's
1652 EFI_RNG_PROTOCOL implementation (if available) to supply entropy
1653 to the kernel proper. In addition, it will randomise the physical
1654 location of the kernel Image as well.
1658 config RANDOMIZE_MODULE_REGION_FULL
1659 bool "Randomize the module region over a 4 GB range"
1660 depends on RANDOMIZE_BASE
1663 Randomizes the location of the module region inside a 4 GB window
1664 covering the core kernel. This way, it is less likely for modules
1665 to leak information about the location of core kernel data structures
1666 but it does imply that function calls between modules and the core
1667 kernel will need to be resolved via veneers in the module PLT.
1669 When this option is not set, the module region will be randomized over
1670 a limited range that contains the [_stext, _etext] interval of the
1671 core kernel, so branch relocations are always in range.
1673 config CC_HAVE_STACKPROTECTOR_SYSREG
1674 def_bool $(cc-option,-mstack-protector-guard=sysreg -mstack-protector-guard-reg=sp_el0 -mstack-protector-guard-offset=0)
1676 config STACKPROTECTOR_PER_TASK
1678 depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_SYSREG
1684 config ARM64_ACPI_PARKING_PROTOCOL
1685 bool "Enable support for the ARM64 ACPI parking protocol"
1688 Enable support for the ARM64 ACPI parking protocol. If disabled
1689 the kernel will not allow booting through the ARM64 ACPI parking
1690 protocol even if the corresponding data is present in the ACPI
1694 string "Default kernel command string"
1697 Provide a set of default command-line options at build time by
1698 entering them here. As a minimum, you should specify the the
1699 root device (e.g. root=/dev/nfs).
1701 config CMDLINE_FORCE
1702 bool "Always use the default kernel command string"
1703 depends on CMDLINE != ""
1705 Always use the default kernel command string, even if the boot
1706 loader passes other arguments to the kernel.
1707 This is useful if you cannot or don't want to change the
1708 command-line options your boot loader passes to the kernel.
1714 bool "UEFI runtime support"
1715 depends on OF && !CPU_BIG_ENDIAN
1716 depends on KERNEL_MODE_NEON
1717 select ARCH_SUPPORTS_ACPI
1720 select EFI_PARAMS_FROM_FDT
1721 select EFI_RUNTIME_WRAPPERS
1726 This option provides support for runtime services provided
1727 by UEFI firmware (such as non-volatile variables, realtime
1728 clock, and platform reset). A UEFI stub is also provided to
1729 allow the kernel to be booted as an EFI application. This
1730 is only useful on systems that have UEFI firmware.
1733 bool "Enable support for SMBIOS (DMI) tables"
1737 This enables SMBIOS/DMI feature for systems.
1739 This option is only useful on systems that have UEFI firmware.
1740 However, even with this option, the resultant kernel should
1741 continue to boot on existing non-UEFI platforms.
1745 config SYSVIPC_COMPAT
1747 depends on COMPAT && SYSVIPC
1749 config ARCH_ENABLE_HUGEPAGE_MIGRATION
1751 depends on HUGETLB_PAGE && MIGRATION
1753 menu "Power management options"
1755 source "kernel/power/Kconfig"
1757 config ARCH_HIBERNATION_POSSIBLE
1761 config ARCH_HIBERNATION_HEADER
1763 depends on HIBERNATION
1765 config ARCH_SUSPEND_POSSIBLE
1770 menu "CPU Power Management"
1772 source "drivers/cpuidle/Kconfig"
1774 source "drivers/cpufreq/Kconfig"
1778 source "drivers/firmware/Kconfig"
1780 source "drivers/acpi/Kconfig"
1782 source "arch/arm64/kvm/Kconfig"
1785 source "arch/arm64/crypto/Kconfig"