arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (C) 2016 Marvell Technology Group Ltd.
   4  *
   5  * Device Tree file for MACCHIATOBin Armada 8040 community board platform
   6  */
   7
   8 #include "armada-8040.dtsi"
   9
  10 #include <dt-bindings/gpio/gpio.h>
  11
  12 / {
  13         model = "Marvell 8040 MACCHIATOBin";
  14         compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
  15                         "marvell,armada-ap806-quad", "marvell,armada-ap806";
  16
  17         chosen {
  18                 stdout-path = "serial0:115200n8";
  19         };
  20
  21         memory@0 {
  22                 device_type = "memory";
  23                 reg = <0x0 0x0 0x0 0x80000000>;
  24         };
  25
  26         aliases {
  27                 ethernet0 = &cp0_eth0;
  28                 ethernet1 = &cp1_eth0;
  29                 ethernet2 = &cp1_eth1;
  30                 ethernet3 = &cp1_eth2;
  31         };
  32
  33         /* Regulator labels correspond with schematics */
  34         v_3_3: regulator-3-3v {
  35                 compatible = "regulator-fixed";
  36                 regulator-name = "v_3_3";
  37                 regulator-min-microvolt = <3300000>;
  38                 regulator-max-microvolt = <3300000>;
  39                 regulator-always-on;
  40                 status = "okay";
  41         };
  42
  43         v_vddo_h: regulator-1-8v {
  44                 compatible = "regulator-fixed";
  45                 regulator-name = "v_vddo_h";
  46                 regulator-min-microvolt = <1800000>;
  47                 regulator-max-microvolt = <1800000>;
  48                 regulator-always-on;
  49                 status = "okay";
  50         };
  51
  52         v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
  53                 compatible = "regulator-fixed";
  54                 enable-active-high;
  55                 gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
  56                 pinctrl-names = "default";
  57                 pinctrl-0 = <&cp0_xhci_vbus_pins>;
  58                 regulator-name = "v_5v0_usb3_hst_vbus";
  59                 regulator-min-microvolt = <5000000>;
  60                 regulator-max-microvolt = <5000000>;
  61                 status = "okay";
  62         };
  63
  64         usb3h0_phy: usb3_phy0 {
  65                 compatible = "usb-nop-xceiv";
  66                 vcc-supply = <&v_5v0_usb3_hst_vbus>;
  67         };
  68
  69         sfp_eth0: sfp-eth0 {
  70                 /* CON15,16 - CPM lane 4 */
  71                 compatible = "sff,sfp";
  72                 i2c-bus = <&sfpp0_i2c>;
  73                 los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
  74                 mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
  75                 tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
  76                 tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
  77                 pinctrl-names = "default";
  78                 pinctrl-0 = <&cp1_sfpp0_pins>;
  79         };
  80
  81         sfp_eth1: sfp-eth1 {
  82                 /* CON17,18 - CPS lane 4 */
  83                 compatible = "sff,sfp";
  84                 i2c-bus = <&sfpp1_i2c>;
  85                 los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
  86                 mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
  87                 tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
  88                 tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
  89                 pinctrl-names = "default";
  90                 pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
  91         };
  92
  93         sfp_eth3: sfp-eth3 {
  94                 /* CON13,14 - CPS lane 5 */
  95                 compatible = "sff,sfp";
  96                 i2c-bus = <&sfp_1g_i2c>;
  97                 los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
  98                 mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
  99                 tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
 100                 tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
 101                 pinctrl-names = "default";
 102                 pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
 103         };
 104 };
 105
 106 &uart0 {
 107         status = "okay";
 108         pinctrl-0 = <&uart0_pins>;
 109         pinctrl-names = "default";
 110 };
 111
 112 &ap_sdhci0 {
 113         bus-width = <8>;
 114         /*
 115          * Not stable in HS modes - phy needs "more calibration", so add
 116          * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
 117          */
 118         marvell,xenon-phy-slow-mode;
 119         no-1-8-v;
 120         no-sd;
 121         no-sdio;
 122         non-removable;
 123         status = "okay";
 124         vqmmc-supply = <&v_vddo_h>;
 125 };
 126
 127 &cp0_i2c0 {
 128         clock-frequency = <100000>;
 129         pinctrl-names = "default";
 130         pinctrl-0 = <&cp0_i2c0_pins>;
 131         status = "okay";
 132 };
 133
 134 &cp0_i2c1 {
 135         clock-frequency = <100000>;
 136         pinctrl-names = "default";
 137         pinctrl-0 = <&cp0_i2c1_pins>;
 138         status = "okay";
 139
 140         i2c-switch@70 {
 141                 compatible = "nxp,pca9548";
 142                 #address-cells = <1>;
 143                 #size-cells = <0>;
 144                 reg = <0x70>;
 145
 146                 sfpp0_i2c: i2c@0 {
 147                         #address-cells = <1>;
 148                         #size-cells = <0>;
 149                         reg = <0>;
 150                 };
 151                 sfpp1_i2c: i2c@1 {
 152                         #address-cells = <1>;
 153                         #size-cells = <0>;
 154                         reg = <1>;
 155                 };
 156                 sfp_1g_i2c: i2c@2 {
 157                         #address-cells = <1>;
 158                         #size-cells = <0>;
 159                         reg = <2>;
 160                 };
 161         };
 162 };
 163
 164 /* J25 UART header */
 165 &cp0_uart1 {
 166         pinctrl-names = "default";
 167         pinctrl-0 = <&cp0_uart1_pins>;
 168         status = "okay";
 169 };
 170
 171 &cp0_mdio {
 172         pinctrl-names = "default";
 173         pinctrl-0 = <&cp0_ge_mdio_pins>;
 174         status = "okay";
 175
 176         ge_phy: ethernet-phy@0 {
 177                 reg = <0>;
 178         };
 179 };
 180
 181 &cp0_pcie0 {
 182         pinctrl-names = "default";
 183         pinctrl-0 = <&cp0_pcie_pins>;
 184         num-lanes = <4>;
 185         num-viewport = <8>;
 186         reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
 187         status = "okay";
 188 };
 189
 190 &cp0_pinctrl {
 191         cp0_ge_mdio_pins: ge-mdio-pins {
 192                 marvell,pins = "mpp32", "mpp34";
 193                 marvell,function = "ge";
 194         };
 195         cp0_i2c1_pins: i2c1-pins {
 196                 marvell,pins = "mpp35", "mpp36";
 197                 marvell,function = "i2c1";
 198         };
 199         cp0_i2c0_pins: i2c0-pins {
 200                 marvell,pins = "mpp37", "mpp38";
 201                 marvell,function = "i2c0";
 202         };
 203         cp0_uart1_pins: uart1-pins {
 204                 marvell,pins = "mpp40", "mpp41";
 205                 marvell,function = "uart1";
 206         };
 207         cp0_xhci_vbus_pins: xhci0-vbus-pins {
 208                 marvell,pins = "mpp47";
 209                 marvell,function = "gpio";
 210         };
 211         cp0_sfp_1g_pins: sfp-1g-pins {
 212                 marvell,pins = "mpp51", "mpp53", "mpp54";
 213                 marvell,function = "gpio";
 214         };
 215         cp0_pcie_pins: pcie-pins {
 216                 marvell,pins = "mpp52";
 217                 marvell,function = "gpio";
 218         };
 219         cp0_sdhci_pins: sdhci-pins {
 220                 marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
 221                                "mpp60", "mpp61";
 222                 marvell,function = "sdio";
 223         };
 224         cp0_sfpp1_pins: sfpp1-pins {
 225                 marvell,pins = "mpp62";
 226                 marvell,function = "gpio";
 227         };
 228 };
 229
 230 &cp0_ethernet {
 231         status = "okay";
 232 };
 233
 234 &cp0_eth0 {
 235         /* Generic PHY, providing serdes lanes */
 236         phys = <&cp0_comphy4 0>;
 237 };
 238
 239 &cp0_sata0 {
 240         /* CPM Lane 0 - U29 */
 241         status = "okay";
 242 };
 243
 244 &cp0_sdhci0 {
 245         /* U6 */
 246         broken-cd;
 247         bus-width = <4>;
 248         pinctrl-names = "default";
 249         pinctrl-0 = <&cp0_sdhci_pins>;
 250         status = "okay";
 251         vqmmc-supply = <&v_3_3>;
 252 };
 253
 254 &cp0_usb3_0 {
 255         /* J38? - USB2.0 only */
 256         status = "okay";
 257 };
 258
 259 &cp0_usb3_1 {
 260         /* J38? - USB2.0 only */
 261         status = "okay";
 262 };
 263
 264 &cp1_ethernet {
 265         status = "okay";
 266 };
 267
 268 &cp1_eth0 {
 269         /* Generic PHY, providing serdes lanes */
 270         phys = <&cp1_comphy4 0>;
 271 };
 272
 273 &cp1_eth1 {
 274         /* CPS Lane 0 - J5 (Gigabit RJ45) */
 275         status = "okay";
 276         /* Network PHY */
 277         phy = <&ge_phy>;
 278         phy-mode = "sgmii";
 279         /* Generic PHY, providing serdes lanes */
 280         phys = <&cp1_comphy0 1>;
 281 };
 282
 283 &cp1_eth2 {
 284         /* CPS Lane 5 */
 285         status = "okay";
 286         /* Network PHY */
 287         phy-mode = "2500base-x";
 288         managed = "in-band-status";
 289         /* Generic PHY, providing serdes lanes */
 290         phys = <&cp1_comphy5 2>;
 291         sfp = <&sfp_eth3>;
 292 };
 293
 294 &cp1_pinctrl {
 295         cp1_sfpp1_pins: sfpp1-pins {
 296                 marvell,pins = "mpp8", "mpp10", "mpp11";
 297                 marvell,function = "gpio";
 298         };
 299         cp1_spi1_pins: spi1-pins {
 300                 marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
 301                 marvell,function = "spi1";
 302         };
 303         cp1_uart0_pins: uart0-pins {
 304                 marvell,pins = "mpp6", "mpp7";
 305                 marvell,function = "uart0";
 306         };
 307         cp1_sfp_1g_pins: sfp-1g-pins {
 308                 marvell,pins = "mpp24";
 309                 marvell,function = "gpio";
 310         };
 311         cp1_sfpp0_pins: sfpp0-pins {
 312                 marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
 313                 marvell,function = "gpio";
 314         };
 315 };
 316
 317 /* J27 UART header */
 318 &cp1_uart0 {
 319         pinctrl-names = "default";
 320         pinctrl-0 = <&cp1_uart0_pins>;
 321         status = "okay";
 322 };
 323
 324 &cp1_sata0 {
 325         /* CPS Lane 1 - U32 */
 326         /* CPS Lane 3 - U31 */
 327         status = "okay";
 328 };
 329
 330 &cp1_spi1 {
 331         pinctrl-names = "default";
 332         pinctrl-0 = <&cp1_spi1_pins>;
 333         status = "okay";
 334
 335         spi-flash@0 {
 336                 compatible = "st,w25q32";
 337                 spi-max-frequency = <50000000>;
 338                 reg = <0>;
 339         };
 340 };
 341
 342 &cp1_usb3_0 {
 343         /* CPS Lane 2 - CON7 */
 344         usb-phy = <&usb3h0_phy>;
 345         status = "okay";
 346 };