1 // SPDX-License-Identifier: GPL-2.0
2 #include "tegra194.dtsi"
4 #include <dt-bindings/mfd/max77620.h>
7 model = "NVIDIA Jetson AGX Xavier";
8 compatible = "nvidia,p2888", "nvidia,tegra194";
11 ethernet0 = "/cbb@0/ethernet@2490000";
12 sdhci0 = "/cbb@0/sdhci@3460000";
13 sdhci1 = "/cbb@0/sdhci@3400000";
16 i2c1 = "/cbb@0/i2c@3160000";
17 i2c2 = "/cbb@0/i2c@c240000";
18 i2c3 = "/cbb@0/i2c@3180000";
19 i2c4 = "/cbb@0/i2c@3190000";
20 i2c5 = "/cbb@0/i2c@31c0000";
21 i2c6 = "/cbb@0/i2c@c250000";
22 i2c7 = "/cbb@0/i2c@31e0000";
26 bootargs = "console=ttyS0,115200n8";
27 stdout-path = "serial0:115200n8";
34 phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
43 compatible = "ethernet-phy-ieee802.3-c22";
45 interrupt-parent = <&gpio>;
46 interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
51 memory-controller@2c00000 {
61 cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
70 vqmmc-supply = <&vdd_1v8ls>;
71 vmmc-supply = <&vdd_emmc_3v3>;
79 nvidia,invert-interrupt;
88 compatible = "maxim,max20024";
91 interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
92 #interrupt-cells = <2>;
98 pinctrl-names = "default";
99 pinctrl-0 = <&max20024_default>;
101 max20024_default: pinmux {
109 function = "fps-out";
110 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
115 function = "fps-out";
116 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
121 function = "fps-out";
122 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
127 function = "32k-out1";
128 drive-push-pull = <1>;
134 drive-push-pull = <1>;
140 drive-push-pull = <0>;
146 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
147 maxim,shutdown-fps-time-period-us = <640>;
151 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
152 maxim,shutdown-fps-time-period-us = <640>;
153 maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
157 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
158 maxim,shutdown-fps-time-period-us = <640>;
163 in-sd0-supply = <&vdd_5v0_sys>;
164 in-sd1-supply = <&vdd_5v0_sys>;
165 in-sd2-supply = <&vdd_5v0_sys>;
166 in-sd3-supply = <&vdd_5v0_sys>;
167 in-sd4-supply = <&vdd_5v0_sys>;
169 in-ldo0-1-supply = <&vdd_5v0_sys>;
170 in-ldo2-supply = <&vdd_5v0_sys>;
171 in-ldo3-5-supply = <&vdd_5v0_sys>;
172 in-ldo4-6-supply = <&vdd_5v0_sys>;
173 in-ldo7-8-supply = <&vdd_1v8ls>;
176 regulator-name = "VDDIO_SYS_1V0";
177 regulator-min-microvolt = <1000000>;
178 regulator-max-microvolt = <1000000>;
184 regulator-name = "VDDIO_SYS_1V8HS";
185 regulator-min-microvolt = <1800000>;
186 regulator-max-microvolt = <1800000>;
192 regulator-name = "VDDIO_SYS_1V8LS";
193 regulator-min-microvolt = <1800000>;
194 regulator-max-microvolt = <1800000>;
200 regulator-name = "VDDIO_AO_1V8";
201 regulator-min-microvolt = <1800000>;
202 regulator-max-microvolt = <1800000>;
208 regulator-name = "VDD_DDR_1V1";
209 regulator-min-microvolt = <1100000>;
210 regulator-max-microvolt = <1100000>;
216 regulator-name = "VDD_RTC";
217 regulator-min-microvolt = <800000>;
218 regulator-max-microvolt = <800000>;
224 regulator-name = "VDDIO_AO_3V3";
225 regulator-min-microvolt = <3300000>;
226 regulator-max-microvolt = <3300000>;
232 regulator-name = "VDD_EMMC_3V3";
233 regulator-min-microvolt = <3300000>;
234 regulator-max-microvolt = <3300000>;
238 regulator-name = "VDD_USB_3V3";
239 regulator-min-microvolt = <3300000>;
240 regulator-max-microvolt = <3300000>;
244 regulator-name = "VDD_SDIO_3V3";
245 regulator-min-microvolt = <3300000>;
246 regulator-max-microvolt = <3300000>;
250 regulator-name = "AVDD_CSI_1V2";
251 regulator-min-microvolt = <1200000>;
252 regulator-max-microvolt = <1200000>;
257 temperature-sensor@4c {
258 compatible = "ti,tmp451";
261 interrupt-parent = <&gpio>;
262 interrupts = <TEGRA194_MAIN_GPIO(H, 2)
264 vcc-supply = <&vdd_1v8ls>;
266 #thermal-sensor-cells = <1>;
272 compatible = "simple-bus";
273 #address-cells = <1>;
276 vdd_5v0_sys: regulator@0 {
277 compatible = "regulator-fixed";
280 regulator-name = "VIN_SYS_5V0";
281 regulator-min-microvolt = <5000000>;
282 regulator-max-microvolt = <5000000>;
287 vdd_hdmi: regulator@1 {
288 compatible = "regulator-fixed";
291 regulator-name = "VDD_5V0_HDMI_CON";
292 regulator-min-microvolt = <5000000>;
293 regulator-max-microvolt = <5000000>;
294 gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
298 vdd_3v3_pcie: regulator@2 {
299 compatible = "regulator-fixed";
302 regulator-name = "PEX_3V3";
303 regulator-min-microvolt = <3300000>;
304 regulator-max-microvolt = <3300000>;
305 gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
310 vdd_12v_pcie: regulator@3 {
311 compatible = "regulator-fixed";
314 regulator-name = "VDD_12V";
315 regulator-min-microvolt = <1200000>;
316 regulator-max-microvolt = <1200000>;
317 gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;