1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _ASM_X86_PARAVIRT_TYPES_H
3 #define _ASM_X86_PARAVIRT_TYPES_H
5 /* Bitmask of what can be clobbered: usually at least eax. */
7 #define CLBR_EAX (1 << 0)
8 #define CLBR_ECX (1 << 1)
9 #define CLBR_EDX (1 << 2)
10 #define CLBR_EDI (1 << 3)
13 /* CLBR_ANY should match all regs platform has. For i386, that's just it */
14 #define CLBR_ANY ((1 << 4) - 1)
16 #define CLBR_ARG_REGS (CLBR_EAX | CLBR_EDX | CLBR_ECX)
17 #define CLBR_RET_REG (CLBR_EAX | CLBR_EDX)
18 #define CLBR_SCRATCH (0)
20 #define CLBR_RAX CLBR_EAX
21 #define CLBR_RCX CLBR_ECX
22 #define CLBR_RDX CLBR_EDX
23 #define CLBR_RDI CLBR_EDI
24 #define CLBR_RSI (1 << 4)
25 #define CLBR_R8 (1 << 5)
26 #define CLBR_R9 (1 << 6)
27 #define CLBR_R10 (1 << 7)
28 #define CLBR_R11 (1 << 8)
30 #define CLBR_ANY ((1 << 9) - 1)
32 #define CLBR_ARG_REGS (CLBR_RDI | CLBR_RSI | CLBR_RDX | \
33 CLBR_RCX | CLBR_R8 | CLBR_R9)
34 #define CLBR_RET_REG (CLBR_RAX)
35 #define CLBR_SCRATCH (CLBR_R10 | CLBR_R11)
39 #define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
43 #include <asm/desc_defs.h>
44 #include <asm/kmap_types.h>
45 #include <asm/pgtable_types.h>
46 #include <asm/nospec-branch.h>
56 struct flush_tlb_info;
58 struct vm_area_struct;
61 * Wrapper type for pointers to code which uses the non-standard
62 * calling convention. See PV_CALL_SAVE_REGS_THUNK below.
64 struct paravirt_callee_save {
70 #ifdef CONFIG_PARAVIRT_XXL
71 unsigned int kernel_rpl;
72 int shared_kernel_pmd;
75 u16 extra_user_64bit_cs; /* __USER_CS if none */
84 * Patch may replace one of the defined code sequences with
85 * arbitrary code, subject to the same register constraints.
86 * This generally means the code is not free to clobber any
87 * registers other than EAX. The patch function should return
88 * the number of bytes of code generated, as we nop pad the
89 * rest in generic code.
91 unsigned (*patch)(u8 type, void *insn_buff,
92 unsigned long addr, unsigned len);
93 } __no_randomize_layout;
95 #ifdef CONFIG_PARAVIRT_XXL
97 /* Set deferred update mode, used for batching operations. */
101 } __no_randomize_layout;
105 unsigned long long (*sched_clock)(void);
106 unsigned long long (*steal_clock)(int cpu);
107 } __no_randomize_layout;
110 /* hooks for various privileged instructions */
111 void (*io_delay)(void);
113 #ifdef CONFIG_PARAVIRT_XXL
114 unsigned long (*get_debugreg)(int regno);
115 void (*set_debugreg)(int regno, unsigned long value);
117 unsigned long (*read_cr0)(void);
118 void (*write_cr0)(unsigned long);
120 void (*write_cr4)(unsigned long);
122 /* Segment descriptor handling */
123 void (*load_tr_desc)(void);
124 void (*load_gdt)(const struct desc_ptr *);
125 void (*load_idt)(const struct desc_ptr *);
126 void (*set_ldt)(const void *desc, unsigned entries);
127 unsigned long (*store_tr)(void);
128 void (*load_tls)(struct thread_struct *t, unsigned int cpu);
130 void (*load_gs_index)(unsigned int idx);
132 void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
134 void (*write_gdt_entry)(struct desc_struct *,
135 int entrynum, const void *desc, int size);
136 void (*write_idt_entry)(gate_desc *,
137 int entrynum, const gate_desc *gate);
138 void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
139 void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
141 void (*load_sp0)(unsigned long sp0);
143 #ifdef CONFIG_X86_IOPL_IOPERM
144 void (*update_io_bitmap)(void);
147 void (*wbinvd)(void);
149 /* cpuid emulation, mostly so that caps bits can be disabled */
150 void (*cpuid)(unsigned int *eax, unsigned int *ebx,
151 unsigned int *ecx, unsigned int *edx);
153 /* Unsafe MSR operations. These will warn or panic on failure. */
154 u64 (*read_msr)(unsigned int msr);
155 void (*write_msr)(unsigned int msr, unsigned low, unsigned high);
158 * Safe MSR operations.
159 * read sets err to 0 or -EIO. write returns 0 or -EIO.
161 u64 (*read_msr_safe)(unsigned int msr, int *err);
162 int (*write_msr_safe)(unsigned int msr, unsigned low, unsigned high);
164 u64 (*read_pmc)(int counter);
167 * Switch to usermode gs and return to 64-bit usermode using
168 * sysret. Only used in 64-bit kernels to return to 64-bit
169 * processes. Usermode register state, including %rsp, must
170 * already be restored.
172 void (*usergs_sysret64)(void);
174 /* Normal iret. Jump to this with the standard iret stack
178 void (*swapgs)(void);
180 void (*start_context_switch)(struct task_struct *prev);
181 void (*end_context_switch)(struct task_struct *next);
183 } __no_randomize_layout;
186 #ifdef CONFIG_PARAVIRT_XXL
188 * Get/set interrupt state. save_fl and restore_fl are only
189 * expected to use X86_EFLAGS_IF; all other bits
190 * returned from save_fl are undefined, and may be ignored by
193 * NOTE: These functions callers expect the callee to preserve
194 * more registers than the standard C calling convention.
196 struct paravirt_callee_save save_fl;
197 struct paravirt_callee_save restore_fl;
198 struct paravirt_callee_save irq_disable;
199 struct paravirt_callee_save irq_enable;
201 void (*safe_halt)(void);
204 } __no_randomize_layout;
208 void (*flush_tlb_user)(void);
209 void (*flush_tlb_kernel)(void);
210 void (*flush_tlb_one_user)(unsigned long addr);
211 void (*flush_tlb_others)(const struct cpumask *cpus,
212 const struct flush_tlb_info *info);
214 void (*tlb_remove_table)(struct mmu_gather *tlb, void *table);
216 /* Hook for intercepting the destruction of an mm_struct. */
217 void (*exit_mmap)(struct mm_struct *mm);
219 #ifdef CONFIG_PARAVIRT_XXL
220 struct paravirt_callee_save read_cr2;
221 void (*write_cr2)(unsigned long);
223 unsigned long (*read_cr3)(void);
224 void (*write_cr3)(unsigned long);
226 /* Hooks for intercepting the creation/use of an mm_struct. */
227 void (*activate_mm)(struct mm_struct *prev,
228 struct mm_struct *next);
229 void (*dup_mmap)(struct mm_struct *oldmm,
230 struct mm_struct *mm);
232 /* Hooks for allocating and freeing a pagetable top-level */
233 int (*pgd_alloc)(struct mm_struct *mm);
234 void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
237 * Hooks for allocating/releasing pagetable pages when they're
238 * attached to a pagetable
240 void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
241 void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
242 void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
243 void (*alloc_p4d)(struct mm_struct *mm, unsigned long pfn);
244 void (*release_pte)(unsigned long pfn);
245 void (*release_pmd)(unsigned long pfn);
246 void (*release_pud)(unsigned long pfn);
247 void (*release_p4d)(unsigned long pfn);
249 /* Pagetable manipulation functions */
250 void (*set_pte)(pte_t *ptep, pte_t pteval);
251 void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
252 pte_t *ptep, pte_t pteval);
253 void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
255 pte_t (*ptep_modify_prot_start)(struct vm_area_struct *vma, unsigned long addr,
257 void (*ptep_modify_prot_commit)(struct vm_area_struct *vma, unsigned long addr,
258 pte_t *ptep, pte_t pte);
260 struct paravirt_callee_save pte_val;
261 struct paravirt_callee_save make_pte;
263 struct paravirt_callee_save pgd_val;
264 struct paravirt_callee_save make_pgd;
266 #if CONFIG_PGTABLE_LEVELS >= 3
267 #ifdef CONFIG_X86_PAE
268 void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
269 void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
271 void (*pmd_clear)(pmd_t *pmdp);
273 #endif /* CONFIG_X86_PAE */
275 void (*set_pud)(pud_t *pudp, pud_t pudval);
277 struct paravirt_callee_save pmd_val;
278 struct paravirt_callee_save make_pmd;
280 #if CONFIG_PGTABLE_LEVELS >= 4
281 struct paravirt_callee_save pud_val;
282 struct paravirt_callee_save make_pud;
284 void (*set_p4d)(p4d_t *p4dp, p4d_t p4dval);
286 #if CONFIG_PGTABLE_LEVELS >= 5
287 struct paravirt_callee_save p4d_val;
288 struct paravirt_callee_save make_p4d;
290 void (*set_pgd)(pgd_t *pgdp, pgd_t pgdval);
291 #endif /* CONFIG_PGTABLE_LEVELS >= 5 */
293 #endif /* CONFIG_PGTABLE_LEVELS >= 4 */
295 #endif /* CONFIG_PGTABLE_LEVELS >= 3 */
297 struct pv_lazy_ops lazy_mode;
301 /* Sometimes the physical address is a pfn, and sometimes its
302 an mfn. We can tell which is which from the index. */
303 void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
304 phys_addr_t phys, pgprot_t flags);
306 } __no_randomize_layout;
308 struct arch_spinlock;
310 #include <asm/spinlock_types.h>
316 void (*queued_spin_lock_slowpath)(struct qspinlock *lock, u32 val);
317 struct paravirt_callee_save queued_spin_unlock;
319 void (*wait)(u8 *ptr, u8 val);
320 void (*kick)(int cpu);
322 struct paravirt_callee_save vcpu_is_preempted;
323 } __no_randomize_layout;
325 /* This contains all the paravirt structures: we get a convenient
326 * number for each function using the offset which we use to indicate
328 struct paravirt_patch_template {
329 struct pv_init_ops init;
330 struct pv_time_ops time;
331 struct pv_cpu_ops cpu;
332 struct pv_irq_ops irq;
333 struct pv_mmu_ops mmu;
334 struct pv_lock_ops lock;
335 } __no_randomize_layout;
337 extern struct pv_info pv_info;
338 extern struct paravirt_patch_template pv_ops;
340 #define PARAVIRT_PATCH(x) \
341 (offsetof(struct paravirt_patch_template, x) / sizeof(void *))
343 #define paravirt_type(op) \
344 [paravirt_typenum] "i" (PARAVIRT_PATCH(op)), \
345 [paravirt_opptr] "i" (&(pv_ops.op))
346 #define paravirt_clobber(clobber) \
347 [paravirt_clobber] "i" (clobber)
350 * Generate some code, and mark it as patchable by the
351 * apply_paravirt() alternate instruction patcher.
353 #define _paravirt_alt(insn_string, type, clobber) \
354 "771:\n\t" insn_string "\n" "772:\n" \
355 ".pushsection .parainstructions,\"a\"\n" \
358 " .byte " type "\n" \
359 " .byte 772b-771b\n" \
360 " .short " clobber "\n" \
363 /* Generate patchable code, with the default asm parameters. */
364 #define paravirt_alt(insn_string) \
365 _paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
367 /* Simple instruction patching code. */
368 #define NATIVE_LABEL(a,x,b) "\n\t.globl " a #x "_" #b "\n" a #x "_" #b ":\n\t"
370 unsigned paravirt_patch_ident_64(void *insn_buff, unsigned len);
371 unsigned paravirt_patch_default(u8 type, void *insn_buff, unsigned long addr, unsigned len);
372 unsigned paravirt_patch_insns(void *insn_buff, unsigned len, const char *start, const char *end);
374 unsigned native_patch(u8 type, void *insn_buff, unsigned long addr, unsigned len);
376 int paravirt_disable_iospace(void);
379 * This generates an indirect call based on the operation type number.
380 * The type number, computed in PARAVIRT_PATCH, is derived from the
381 * offset into the paravirt_patch_template structure, and can therefore be
382 * freely converted back into a structure offset.
384 #define PARAVIRT_CALL \
385 ANNOTATE_RETPOLINE_SAFE \
386 "call *%c[paravirt_opptr];"
389 * These macros are intended to wrap calls through one of the paravirt
390 * ops structs, so that they can be later identified and patched at
393 * Normally, a call to a pv_op function is a simple indirect call:
394 * (pv_op_struct.operations)(args...).
396 * Unfortunately, this is a relatively slow operation for modern CPUs,
397 * because it cannot necessarily determine what the destination
398 * address is. In this case, the address is a runtime constant, so at
399 * the very least we can patch the call to e a simple direct call, or
400 * ideally, patch an inline implementation into the callsite. (Direct
401 * calls are essentially free, because the call and return addresses
402 * are completely predictable.)
404 * For i386, these macros rely on the standard gcc "regparm(3)" calling
405 * convention, in which the first three arguments are placed in %eax,
406 * %edx, %ecx (in that order), and the remaining arguments are placed
407 * on the stack. All caller-save registers (eax,edx,ecx) are expected
408 * to be modified (either clobbered or used for return values).
409 * X86_64, on the other hand, already specifies a register-based calling
410 * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
411 * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
412 * special handling for dealing with 4 arguments, unlike i386.
413 * However, x86_64 also have to clobber all caller saved registers, which
414 * unfortunately, are quite a bit (r8 - r11)
416 * The call instruction itself is marked by placing its start address
417 * and size into the .parainstructions section, so that
418 * apply_paravirt() in arch/i386/kernel/alternative.c can do the
419 * appropriate patching under the control of the backend pv_init_ops
422 * Unfortunately there's no way to get gcc to generate the args setup
423 * for the call, and then allow the call itself to be generated by an
424 * inline asm. Because of this, we must do the complete arg setup and
425 * return value handling from within these macros. This is fairly
428 * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
429 * It could be extended to more arguments, but there would be little
430 * to be gained from that. For each number of arguments, there are
431 * the two VCALL and CALL variants for void and non-void functions.
433 * When there is a return value, the invoker of the macro must specify
434 * the return type. The macro then uses sizeof() on that type to
435 * determine whether its a 32 or 64 bit value, and places the return
436 * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
437 * 64-bit). For x86_64 machines, it just returns at %rax regardless of
438 * the return value size.
440 * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
441 * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
444 * Small structures are passed and returned in registers. The macro
445 * calling convention can't directly deal with this, so the wrapper
446 * functions must do this.
448 * These PVOP_* macros are only defined within this header. This
449 * means that all uses must be wrapped in inline functions. This also
450 * makes sure the incoming and outgoing types are always correct.
453 #define PVOP_VCALL_ARGS \
454 unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx;
456 #define PVOP_CALL_ARGS PVOP_VCALL_ARGS
458 #define PVOP_CALL_ARG1(x) "a" ((unsigned long)(x))
459 #define PVOP_CALL_ARG2(x) "d" ((unsigned long)(x))
460 #define PVOP_CALL_ARG3(x) "c" ((unsigned long)(x))
462 #define PVOP_VCALL_CLOBBERS "=a" (__eax), "=d" (__edx), \
464 #define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS
466 #define PVOP_VCALLEE_CLOBBERS "=a" (__eax), "=d" (__edx)
467 #define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS
469 #define EXTRA_CLOBBERS
470 #define VEXTRA_CLOBBERS
471 #else /* CONFIG_X86_64 */
472 /* [re]ax isn't an arg, but the return val */
473 #define PVOP_VCALL_ARGS \
474 unsigned long __edi = __edi, __esi = __esi, \
475 __edx = __edx, __ecx = __ecx, __eax = __eax;
477 #define PVOP_CALL_ARGS PVOP_VCALL_ARGS
479 #define PVOP_CALL_ARG1(x) "D" ((unsigned long)(x))
480 #define PVOP_CALL_ARG2(x) "S" ((unsigned long)(x))
481 #define PVOP_CALL_ARG3(x) "d" ((unsigned long)(x))
482 #define PVOP_CALL_ARG4(x) "c" ((unsigned long)(x))
484 #define PVOP_VCALL_CLOBBERS "=D" (__edi), \
485 "=S" (__esi), "=d" (__edx), \
487 #define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS, "=a" (__eax)
489 /* void functions are still allowed [re]ax for scratch */
490 #define PVOP_VCALLEE_CLOBBERS "=a" (__eax)
491 #define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS
493 #define EXTRA_CLOBBERS , "r8", "r9", "r10", "r11"
494 #define VEXTRA_CLOBBERS , "rax", "r8", "r9", "r10", "r11"
495 #endif /* CONFIG_X86_32 */
497 #ifdef CONFIG_PARAVIRT_DEBUG
498 #define PVOP_TEST_NULL(op) BUG_ON(pv_ops.op == NULL)
500 #define PVOP_TEST_NULL(op) ((void)pv_ops.op)
503 #define PVOP_RETMASK(rettype) \
504 ({ unsigned long __mask = ~0UL; \
505 switch (sizeof(rettype)) { \
506 case 1: __mask = 0xffUL; break; \
507 case 2: __mask = 0xffffUL; break; \
508 case 4: __mask = 0xffffffffUL; break; \
515 #define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr, \
520 PVOP_TEST_NULL(op); \
521 /* This is 32-bit specific, but is okay in 64-bit */ \
522 /* since this condition will never hold */ \
523 if (sizeof(rettype) > sizeof(unsigned long)) { \
525 paravirt_alt(PARAVIRT_CALL) \
527 : call_clbr, ASM_CALL_CONSTRAINT \
528 : paravirt_type(op), \
529 paravirt_clobber(clbr), \
531 : "memory", "cc" extra_clbr); \
532 __ret = (rettype)((((u64)__edx) << 32) | __eax); \
535 paravirt_alt(PARAVIRT_CALL) \
537 : call_clbr, ASM_CALL_CONSTRAINT \
538 : paravirt_type(op), \
539 paravirt_clobber(clbr), \
541 : "memory", "cc" extra_clbr); \
542 __ret = (rettype)(__eax & PVOP_RETMASK(rettype)); \
547 #define __PVOP_CALL(rettype, op, pre, post, ...) \
548 ____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS, \
549 EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
551 #define __PVOP_CALLEESAVE(rettype, op, pre, post, ...) \
552 ____PVOP_CALL(rettype, op.func, CLBR_RET_REG, \
553 PVOP_CALLEE_CLOBBERS, , \
554 pre, post, ##__VA_ARGS__)
557 #define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...) \
560 PVOP_TEST_NULL(op); \
562 paravirt_alt(PARAVIRT_CALL) \
564 : call_clbr, ASM_CALL_CONSTRAINT \
565 : paravirt_type(op), \
566 paravirt_clobber(clbr), \
568 : "memory", "cc" extra_clbr); \
571 #define __PVOP_VCALL(op, pre, post, ...) \
572 ____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS, \
574 pre, post, ##__VA_ARGS__)
576 #define __PVOP_VCALLEESAVE(op, pre, post, ...) \
577 ____PVOP_VCALL(op.func, CLBR_RET_REG, \
578 PVOP_VCALLEE_CLOBBERS, , \
579 pre, post, ##__VA_ARGS__)
583 #define PVOP_CALL0(rettype, op) \
584 __PVOP_CALL(rettype, op, "", "")
585 #define PVOP_VCALL0(op) \
586 __PVOP_VCALL(op, "", "")
588 #define PVOP_CALLEE0(rettype, op) \
589 __PVOP_CALLEESAVE(rettype, op, "", "")
590 #define PVOP_VCALLEE0(op) \
591 __PVOP_VCALLEESAVE(op, "", "")
594 #define PVOP_CALL1(rettype, op, arg1) \
595 __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
596 #define PVOP_VCALL1(op, arg1) \
597 __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
599 #define PVOP_CALLEE1(rettype, op, arg1) \
600 __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
601 #define PVOP_VCALLEE1(op, arg1) \
602 __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
605 #define PVOP_CALL2(rettype, op, arg1, arg2) \
606 __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \
607 PVOP_CALL_ARG2(arg2))
608 #define PVOP_VCALL2(op, arg1, arg2) \
609 __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1), \
610 PVOP_CALL_ARG2(arg2))
612 #define PVOP_CALLEE2(rettype, op, arg1, arg2) \
613 __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \
614 PVOP_CALL_ARG2(arg2))
615 #define PVOP_VCALLEE2(op, arg1, arg2) \
616 __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1), \
617 PVOP_CALL_ARG2(arg2))
620 #define PVOP_CALL3(rettype, op, arg1, arg2, arg3) \
621 __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \
622 PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
623 #define PVOP_VCALL3(op, arg1, arg2, arg3) \
624 __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1), \
625 PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
627 /* This is the only difference in x86_64. We can make it much simpler */
629 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4) \
630 __PVOP_CALL(rettype, op, \
631 "push %[_arg4];", "lea 4(%%esp),%%esp;", \
632 PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \
633 PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
634 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4) \
636 "push %[_arg4];", "lea 4(%%esp),%%esp;", \
637 "0" ((u32)(arg1)), "1" ((u32)(arg2)), \
638 "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
640 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4) \
641 __PVOP_CALL(rettype, op, "", "", \
642 PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \
643 PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
644 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4) \
645 __PVOP_VCALL(op, "", "", \
646 PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \
647 PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
650 /* Lazy mode for batching updates / context switch */
651 enum paravirt_lazy_mode {
657 enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
658 void paravirt_start_context_switch(struct task_struct *prev);
659 void paravirt_end_context_switch(struct task_struct *next);
661 void paravirt_enter_lazy_mmu(void);
662 void paravirt_leave_lazy_mmu(void);
663 void paravirt_flush_lazy_mmu(void);
665 void _paravirt_nop(void);
666 u64 _paravirt_ident_64(u64);
668 #define paravirt_nop ((void *)_paravirt_nop)
670 /* These all sit in the .parainstructions section to tell us what to patch. */
671 struct paravirt_patch_site {
672 u8 *instr; /* original instructions */
673 u8 type; /* type of this instruction */
674 u8 len; /* length of original instruction */
677 extern struct paravirt_patch_site __parainstructions[],
678 __parainstructions_end[];
680 #endif /* __ASSEMBLY__ */
682 #endif /* _ASM_X86_PARAVIRT_TYPES_H */