1 # Only use ANDROID_BUILD_SHELL to wrap around bash.
2 # DO NOT use other shells such as zsh.
3 ifdef ANDROID_BUILD_SHELL
4 SHELL := $(ANDROID_BUILD_SHELL)
6 # Use bash, not whatever shell somebody has installed as /bin/sh
7 # This is repeated in config.mk, since envsetup.sh runs that file
12 # this turns off the suffix rules built into make
15 # If a rule fails, delete $@.
18 # Figure out where we are.
19 #TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST)))
20 #TOP := $(patsubst %/,%,$(TOP))
22 # TOPDIR is the normal variable you should use, because
23 # if we are executing relative to the current directory
24 # it can be "", whereas TOP must be "." which causes
25 # pattern matching probles when make strips off the
26 # trailing "./" from paths in various places.
33 # check for broken versions of make
34 ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") = 3.81))
35 $(warning ********************************************************************************)
36 $(warning * You are using version $(MAKE_VERSION) of make.)
37 $(warning * Android can only be built by version 3.81.)
38 $(warning * see http://source.android.com/source/download.html)
39 $(warning ********************************************************************************)
46 BUILD_SYSTEM := $(TOPDIR)build/core
48 # This is the default target. It must be the first declared target.
53 # Used to force goals to build. Only use for conditionally defined goals.
57 # Targets that provide quick help on the build system.
58 include $(BUILD_SYSTEM)/help.mk
60 # Set up various standard variables based on configuration
61 # and host information.
62 include $(BUILD_SYSTEM)/config.mk
64 # This allows us to force a clean build - included after the config.make
65 # environment setup is done, but before we generate any dependencies. This
66 # file does the rm -rf inline so the deps which are all done below will
67 # be generated correctly
68 include $(BUILD_SYSTEM)/cleanbuild.mk
70 VERSION_CHECK_SEQUENCE_NUMBER := 2
71 -include $(OUT_DIR)/versions_checked.mk
72 ifneq ($(VERSION_CHECK_SEQUENCE_NUMBER),$(VERSIONS_CHECKED))
74 $(info Checking build tools versions...)
76 ifeq ($(BUILD_OS),linux)
77 build_arch := $(shell uname -m)
78 ifneq (64,$(findstring 64,$(build_arch)))
79 $(warning ************************************************************)
80 $(warning You are attempting to build on a 32-bit system.)
81 $(warning Only 64-bit build environments are supported beyond froyo/2.2.)
82 $(warning ************************************************************)
87 ifneq ($(HOST_OS),windows)
88 ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc)
89 # check for a case sensitive file system
90 ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \
91 echo a > $(OUT_DIR)/casecheck.txt; \
92 echo B > $(OUT_DIR)/CaseCheck.txt; \
93 cat $(OUT_DIR)/casecheck.txt))
94 $(warning ************************************************************)
95 $(warning You are building on a case-insensitive filesystem.)
96 $(warning Please move your source tree to a case-sensitive filesystem.)
97 $(warning ************************************************************)
98 $(error Case-insensitive filesystems not supported)
103 # Make sure that there are no spaces in the absolute path; the
104 # build system can't deal with them.
105 ifneq ($(words $(shell pwd)),1)
106 $(warning ************************************************************)
107 $(warning You are building in a directory whose absolute path contains)
108 $(warning a space character:)
110 $(warning "$(shell pwd)")
112 $(warning Please move your source tree to a path that does not contain)
113 $(warning any spaces.)
114 $(warning ************************************************************)
115 $(error Directory names containing spaces not supported)
119 # Check for the correct version of java
120 java_version := $(shell java -version 2>&1 | head -n 1 | grep '[ "]1\.6[\. "$$]')
121 ifeq ($(strip $(java_version)),)
122 $(info ************************************************************)
123 $(info You are attempting to build with the incorrect version)
126 $(info Your version is: $(shell java -version 2>&1 | head -n 1).)
127 $(info The correct version is: 1.6.)
129 $(info Please follow the machine setup instructions at)
130 $(info $(space)$(space)$(space)$(space)http://source.android.com/source/download.html)
131 $(info ************************************************************)
135 # Check for the correct version of javac
136 javac_version := $(shell javac -version 2>&1 | head -n 1 | grep '[ "]1\.6[\. "$$]')
137 ifeq ($(strip $(javac_version)),)
138 $(info ************************************************************)
139 $(info You are attempting to build with the incorrect version)
142 $(info Your version is: $(shell javac -version 2>&1 | head -n 1).)
143 $(info The correct version is: 1.6.)
145 $(info Please follow the machine setup instructions at)
146 $(info $(space)$(space)$(space)$(space)http://source.android.com/source/download.html)
147 $(info ************************************************************)
151 $(shell echo 'VERSIONS_CHECKED := $(VERSION_CHECK_SEQUENCE_NUMBER)' \
152 > $(OUT_DIR)/versions_checked.mk)
155 # These are the modifier targets that don't do anything themselves, but
156 # change the behavior of the build.
157 # (must be defined before including definitions.make)
158 INTERNAL_MODIFIER_TARGETS := showcommands checkbuild all
160 # Bring in standard build system definitions.
161 include $(BUILD_SYSTEM)/definitions.mk
163 # Bring in dex_preopt.mk
164 include $(BUILD_SYSTEM)/dex_preopt.mk
166 ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),)
167 $(info ***************************************************************)
168 $(info ***************************************************************)
169 $(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \
170 the make command line.)
171 # XXX The single quote on this line fixes gvim's syntax highlighting.
172 # Without which, the rest of this file is impossible to read.
173 $(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or)
175 $(info ***************************************************************)
176 $(info ***************************************************************)
180 ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),)
181 $(info ***************************************************************)
182 $(info ***************************************************************)
183 $(info Invalid variant: $(TARGET_BUILD_VARIANT)
184 $(info Valid values are: $(INTERNAL_VALID_VARIANTS)
185 $(info ***************************************************************)
186 $(info ***************************************************************)
191 ### In this section we set up the things that are different
192 ### between the build variants
196 ifneq ($(filter sdk,$(MAKECMDGOALS)),)
199 ifneq ($(filter win_sdk,$(MAKECMDGOALS)),)
202 ifneq ($(filter sdk_addon,$(MAKECMDGOALS)),)
209 user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT))
210 enable_target_debugging := true
211 ifneq (,$(user_variant))
212 # Target is secure in user builds.
213 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1
215 tags_to_install := user
216 ifeq ($(user_variant),userdebug)
217 # Pick up some extra useful tools
218 tags_to_install += debug
220 # Enable Dalvik lock contention logging for userdebug builds.
221 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.lockprof.threshold=500
223 # Disable debugging in plain user builds.
224 enable_target_debugging :=
227 # TODO: Remove this and the corresponding block in
228 # config/product_config.make once host-based Dalvik preoptimization is
230 ifneq (true,$(DISABLE_DEXPREOPT))
231 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true)
232 WITH_DEXPREOPT := true
236 # Disallow mock locations by default for user builds
237 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0
240 # Turn on checkjni for non-user builds.
241 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1
242 # Set device insecure for non-user builds.
243 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0
244 # Allow mock locations by default for non user builds
245 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1
246 endif # !user_variant
248 ifeq (true,$(strip $(enable_target_debugging)))
249 # Target is more debuggable and adbd is on by default
250 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1
251 # Include the debugging/testing OTA keys in this build.
252 INCLUDE_TEST_OTA_KEYS := true
253 else # !enable_target_debugging
254 # Target is less debuggable and adbd is off by default
255 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0
256 endif # !enable_target_debugging
260 ifeq ($(TARGET_BUILD_VARIANT),eng)
261 tags_to_install := user debug eng
262 # Don't require the setup wizard on eng builds
263 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\
264 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) \
265 ro.setupwizard.mode=OPTIONAL
270 ifeq ($(TARGET_BUILD_VARIANT),tests)
271 tags_to_install := user debug eng tests
277 ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1)
278 $(error The 'sdk' target may not be specified with any other targets)
281 # TODO: this should be eng I think. Since the sdk is built from the eng
283 tags_to_install := user debug eng
284 ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true
285 ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes
289 BUILD_WITHOUT_PV := true
293 ifneq ($(filter dalvik.gc.type-precise,$(PRODUCT_TAGS)),)
294 # Enabling type-precise GC results in larger optimized DEX files. The
295 # additional storage requirements for ".odex" files can cause /system
296 # to overflow on some devices, so this is configured separately for
298 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.dexopt-flags=m=y
301 # Install an apns-conf.xml file if one's not already being installed.
302 ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES)))
303 PRODUCT_COPY_FILES += \
304 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml
305 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),)
306 $(warning implicitly installing apns-conf_sdk.xml)
309 # If we're on an eng or tests build, but not on the sdk, and we have
310 # a better one, use that instead.
311 ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),)
313 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml)
314 ifneq ($(strip $(apns_to_use)),)
315 PRODUCT_COPY_FILES := \
316 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \
317 $(strip $(apns_to_use)):system/etc/apns-conf.xml
322 ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android
324 # enable vm tracing in files for now to help track
325 # the cause of ANRs in the content process
326 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt
328 # ------------------------------------------------------------
329 # Define a function that, given a list of module tags, returns
330 # non-empty if that module should be installed in /system.
332 # For most goals, anything not tagged with the "tests" tag should
333 # be installed in /system.
334 define should-install-to-system
335 $(if $(filter tests,$(1)),,true)
339 # For the sdk goal, anything with the "samples" tag should be
340 # installed in /data even if that module also has "eng"/"debug"/"user".
341 define should-install-to-system
342 $(if $(filter samples tests,$(1)),,true)
347 # If they only used the modifier goals (showcommands, checkbuild), we'll actually
348 # build the default target.
349 ifeq ($(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS)),)
350 .PHONY: $(INTERNAL_MODIFIER_TARGETS)
351 $(INTERNAL_MODIFIER_TARGETS): $(DEFAULT_GOAL)
354 # These targets are going to delete stuff, don't bother including
355 # the whole directory tree if that's all we're going to do
356 ifeq ($(MAKECMDGOALS),clean)
359 ifeq ($(MAKECMDGOALS),clobber)
362 ifeq ($(MAKECMDGOALS),dataclean)
365 ifeq ($(MAKECMDGOALS),installclean)
369 # Bring in all modules that need to be built.
370 ifneq ($(dont_bother),true)
372 ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc)
374 $(info Building the SDK under darwin-ppc is actually obsolete and unsupported.)
378 ifeq ($(HOST_OS),windows)
382 ifeq ($(SDK_ONLY),true)
384 # ----- SDK for Windows ------
385 # These configure the build targets that are available for the SDK under Windows.
386 # The first section defines all the C/C++ tools that can be compiled in C/C++,
387 # the second section defines all the Java ones (assuming javac is available.)
392 build/tools/zipalign \
395 dalvik/tools/dmtracedump \
396 dalvik/tools/hprof-conv \
398 development/tools/etc1tool \
399 development/tools/line_endings \
406 external/sqlite/dist \
410 sdk/emulator/mksdcard \
413 system/core/fastboot \
414 system/core/libcutils \
416 system/core/libzipfile
418 # The following can only be built if "javac" is available.
419 # This check is used when building parts of the SDK under Cygwin.
420 ifneq (,$(shell which javac 2>/dev/null))
422 build/tools/signapk \
429 sdk/hierarchyviewer2 \
438 development/tools/mkstubs \
441 $(warning SDK_ONLY: javac not available.)
444 # Exclude tools/acp when cross-compiling windows under linux
445 ifeq ($(findstring Linux,$(UNAME)),)
446 subdirs += build/tools/acp
450 ifeq ($(BUILD_TINY_ANDROID), true)
452 # TINY_ANDROID is a super-minimal build configuration, handy for board
453 # bringup and very low level debugging
458 system/extras/ext4_utils \
462 build/tools/apriori \
469 else # !BUILD_TINY_ANDROID
472 # Typical build; include any Android.mk files we can find.
478 endif # !BUILD_TINY_ANDROID
482 # Before we go and include all of the module makefiles, stash away
483 # the PRODUCT_* values so that later we can verify they are not modified.
484 stash_product_vars:=true
485 ifeq ($(stash_product_vars),true)
486 $(call stash-product-vars, __STASHED)
489 ifneq ($(ONE_SHOT_MAKEFILE),)
490 # We've probably been invoked by the "mm" shell function
491 # with a subdirectory's makefile.
492 include $(ONE_SHOT_MAKEFILE)
493 # Change CUSTOM_MODULES to include only modules that were
494 # defined by this makefile; this will install all of those
495 # modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE
496 # so that the modules will be installed in the same place they
497 # would have been with a normal make.
498 CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS)))
500 # Stub out the notice targets, which probably aren't defined
501 # when using ONE_SHOT_MAKEFILE.
505 else # ONE_SHOT_MAKEFILE
508 # Include all of the makefiles in the system
511 # Can't use first-makefiles-under here because
512 # --mindepth=2 makes the prunes not work.
513 subdir_makefiles := \
514 $(shell build/tools/findleaves.py --prune=out --prune=.repo --prune=.git $(subdirs) Android.mk)
516 include $(subdir_makefiles)
517 endif # ONE_SHOT_MAKEFILE
519 ifeq ($(stash_product_vars),true)
520 $(call assert-product-vars, __STASHED)
523 include $(BUILD_SYSTEM)/legacy_prebuilts.mk
524 ifneq ($(filter-out $(GRANDFATHERED_ALL_PREBUILT),$(strip $(notdir $(ALL_PREBUILT)))),)
525 $(warning *** Some files have been added to ALL_PREBUILT.)
527 $(warning * ALL_PREBUILT is a deprecated mechanism that)
528 $(warning * should not be used for new files.)
529 $(warning * As an alternative, use PRODUCT_COPY_FILES in)
530 $(warning * the appropriate product definition.)
531 $(warning * build/target/product/core.mk is the product)
532 $(warning * definition used in all products.)
534 $(foreach bad_prebuilt,$(filter-out $(GRANDFATHERED_ALL_PREBUILT),$(strip $(notdir $(ALL_PREBUILT)))),$(warning * unexpected $(bad_prebuilt) in ALL_PREBUILT))
536 $(error ALL_PREBUILT contains unexpected files)
539 # -------------------------------------------------------------------
540 # All module makefiles have been included at this point.
541 # -------------------------------------------------------------------
543 # -------------------------------------------------------------------
544 # Include any makefiles that must happen after the module makefiles
545 # have been included.
546 # TODO: have these files register themselves via a global var rather
547 # than hard-coding the list here.
549 # Only include this during a full build, otherwise we can't be
550 # guaranteed that any policies were included.
551 -include frameworks/policies/base/PolicyConfig.mk
554 # -------------------------------------------------------------------
555 # Fix up CUSTOM_MODULES to refer to installed files rather than
556 # just bare module names. Leave unknown modules alone in case
557 # they're actually full paths to a particular file.
558 known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES))
559 unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES))
561 $(call module-installed-files,$(known_custom_modules)) \
562 $(unknown_custom_modules)
564 # -------------------------------------------------------------------
565 # Define dependencies for modules that require other modules.
566 # This can only happen now, after we've read in all module makefiles.
568 # TODO: deal with the fact that a bare module name isn't
569 # unambiguous enough. Maybe declare short targets like
570 # APPS:Quake or HOST:SHARED_LIBRARIES:libutils.
571 # BUG: the system image won't know to depend on modules that are
572 # brought in as requirements of other modules.
573 define add-required-deps
576 $(foreach m,$(ALL_MODULES), \
577 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \
579 $(eval r := $(call module-installed-files,$(r))) \
580 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \
588 # -------------------------------------------------------------------
589 # Figure out our module sets.
591 # Of the modules defined by the component makefiles,
592 # determine what we actually want to build.
593 Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \
595 # TODO: Remove the 3 places in the tree that use
596 # ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list.
599 # The base list of modules to build for this product is specified
600 # by the appropriate product definition file, which was included
601 # by product_config.make.
602 user_PACKAGES := $(call module-installed-files, \
603 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES))
605 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):)
606 $(foreach p,$(user_PACKAGES),$(info : $(p)))
610 # We're not doing a full build, and are probably only including
611 # a subset of the module makefiles. Don't try to build any modules
612 # requested by the product, because we probably won't have rules
616 # Use tags to get the non-APPS user modules. Use the product
617 # definition files to get the APPS user modules.
618 user_MODULES := $(sort $(call get-tagged-modules,user shell_$(TARGET_SHELL)))
619 user_MODULES := $(user_MODULES) $(user_PACKAGES)
621 eng_MODULES := $(sort $(call get-tagged-modules,eng))
622 debug_MODULES := $(sort $(call get-tagged-modules,debug))
623 tests_MODULES := $(sort $(call get-tagged-modules,tests))
625 ifeq ($(strip $(tags_to_install)),)
626 $(error ASSERTION FAILED: tags_to_install should not be empty)
628 modules_to_install := $(sort $(Default_MODULES) \
629 $(foreach tag,$(tags_to_install),$($(tag)_MODULES)))
631 # Some packages may override others using LOCAL_OVERRIDES_PACKAGES.
632 # Filter out (do not install) any overridden packages.
633 overridden_packages := $(call get-package-overrides,$(modules_to_install))
634 ifdef overridden_packages
635 # old_modules_to_install := $(modules_to_install)
636 modules_to_install := \
637 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \
638 $(modules_to_install))
640 #$(error filtered out
641 # $(filter-out $(modules_to_install),$(old_modules_to_install)))
643 # Don't include any GNU targets in the SDK. It's ok (and necessary)
644 # to build the host tools, but nothing that's going to be installed
645 # on the target (including static libraries).
647 target_gnu_MODULES := \
649 $(TARGET_OUT_INTERMEDIATES)/% \
651 $(TARGET_OUT_DATA)/%, \
652 $(sort $(call get-tagged-modules,gnu)))
653 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d)))
654 modules_to_install := \
655 $(filter-out $(target_gnu_MODULES),$(modules_to_install))
659 # build/core/Makefile contains extra stuff that we don't want to pollute this
660 # top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES
661 # contains everything that's built during the current make, but it also further
662 # extends ALL_DEFAULT_INSTALLED_MODULES.
663 ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install)
664 include $(BUILD_SYSTEM)/Makefile
665 modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES))
666 ALL_DEFAULT_INSTALLED_MODULES :=
670 # These are additional goals that we build, in order to make sure that there
671 # is as little code as possible in the tree that doesn't build.
672 modules_to_check := $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).CHECKED))
674 # If you would like to build all goals, and not skip any intermediate
675 # steps, you can pass the "all" modifier goal on the commandline.
676 ifneq ($(filter all,$(MAKECMDGOALS)),)
677 modules_to_check += $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).BUILT))
680 # for easier debugging
681 modules_to_check := $(sort $(modules_to_check))
682 #$(error modules_to_check $(modules_to_check))
684 # -------------------------------------------------------------------
685 # This is used to to get the ordering right, you can also use these,
686 # but they're considered undocumented, so don't complain if their
689 prebuilt: $(ALL_PREBUILT)
691 # An internal target that depends on all copied headers
692 # (see copy_headers.make). Other targets that need the
693 # headers to be copied first can depend on this target.
694 .PHONY: all_copied_headers
695 all_copied_headers: ;
697 $(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers
699 # All the droid stuff, in directories
702 $(modules_to_install) \
703 $(modules_to_check) \
704 $(INSTALLED_ANDROID_INFO_TXT_TARGET)
706 # -------------------------------------------------------------------
709 checkbuild: $(modules_to_check)
712 ramdisk: $(INSTALLED_RAMDISK_TARGET)
714 .PHONY: systemtarball
715 systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET)
718 boottarball: $(INSTALLED_BOOTTARBALL_TARGET)
720 .PHONY: userdataimage
721 userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET)
723 ifneq (,$(filter userdataimage, $(MAKECMDGOALS)))
724 $(call dist-for-goals, userdataimage, $(BUILT_USERDATAIMAGE_TARGET))
727 .PHONY: userdatatarball
728 userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET)
731 bootimage: $(INSTALLED_BOOTIMAGE_TARGET)
733 ifeq ($(BUILD_TINY_ANDROID), true)
734 INSTALLED_RECOVERYIMAGE_TARGET :=
737 # Build files and then package it into the rom formats
741 $(INSTALLED_BOOTIMAGE_TARGET) \
742 $(INSTALLED_RECOVERYIMAGE_TARGET) \
743 $(INSTALLED_USERDATAIMAGE_TARGET) \
744 $(INSTALLED_FILES_FILE)
746 # dist_files only for putting your library into the dist directory with a full build.
749 ifeq ($(EMMA_INSTRUMENT),true)
750 $(call dist-for-goals, dist_files, $(EMMA_META_ZIP))
753 # Dist for droid if droid is among the cmd goals, or no cmd goal is given.
754 ifneq ($(filter droid,$(MAKECMDGOALS))$(filter ||,|$(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))|),)
756 ifneq ($(TARGET_BUILD_APPS),)
757 # If this build is just for apps, only build apps and not the full system by default.
759 unbundled_build_modules :=
760 ifneq ($(filter all,$(TARGET_BUILD_APPS)),)
761 # If they used the magic goal "all" then build all apps in the source tree.
762 unbundled_build_modules := $(foreach m,$(sort $(ALL_MODULES)),$(if $(filter APPS,$(ALL_MODULES.$(m).CLASS)),$(m)))
764 unbundled_build_modules := $(TARGET_BUILD_APPS)
767 # dist the unbundled app.
768 $(call dist-for-goals,apps_only, \
769 $(foreach m,$(unbundled_build_modules),$(ALL_MODULES.$(m).INSTALLED)) \
773 apps_only: $(unbundled_build_modules)
777 else # TARGET_BUILD_APPS
778 $(call dist-for-goals, droidcore, \
779 $(INTERNAL_UPDATE_PACKAGE_TARGET) \
780 $(INTERNAL_OTA_PACKAGE_TARGET) \
783 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \
784 $(PACKAGE_STATS_FILE) \
785 $(INSTALLED_FILES_FILE) \
786 $(INSTALLED_BUILD_PROP_TARGET) \
787 $(BUILT_TARGET_FILES_PACKAGE) \
788 $(INSTALLED_ANDROID_INFO_TXT_TARGET) \
789 $(INSTALLED_RAMDISK_TARGET) \
792 # Building a full system-- the default is to build droidcore
793 droid: droidcore dist_files
795 endif # TARGET_BUILD_APPS
796 endif # droid in $(MAKECMDGOALS)
802 # phony target that include any targets in $(ALL_MODULES)
804 all_modules: $(ALL_MODULES)
810 ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET)
811 sdk: $(ALL_SDK_TARGETS)
812 ifneq ($(filter sdk,$(MAKECMDGOALS)),)
813 $(call dist-for-goals,sdk, \
820 sample_MODULES := $(sort $(call get-tagged-modules,samples))
821 sample_APKS_DEST_PATH := $(TARGET_COMMON_OUT_ROOT)/samples
822 sample_APKS_COLLECTION := \
823 $(foreach module,$(sample_MODULES),$(sample_APKS_DEST_PATH)/$(notdir $(module)))
824 $(foreach module,$(sample_MODULES),$(eval $(call \
825 copy-one-file,$(module),$(sample_APKS_DEST_PATH)/$(notdir $(module)))))
826 sample_ADDITIONAL_INSTALLED := \
827 $(filter-out $(modules_to_install) $(modules_to_check) $(ALL_PREBUILT),$(sample_MODULES))
828 samplecode: $(sample_APKS_COLLECTION)
829 @echo "Collect sample code apks: $^"
830 # remove apks that are not intended to be installed.
831 rm -f $(sample_ADDITIONAL_INSTALLED)
834 findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET)
839 @echo "Entire build directory removed."
844 # The rules for dataclean and installclean are defined in cleanbuild.mk.
846 #xxx scrape this from ALL_MODULE_NAME_TAGS
849 @echo "Available sub-modules:"
850 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \
851 tr -s ' ' '\n' | sort -u | $(COLUMN)