1 # Only use ANDROID_BUILD_SHELL to wrap around bash.
2 # DO NOT use other shells such as zsh.
3 ifdef ANDROID_BUILD_SHELL
4 SHELL := $(ANDROID_BUILD_SHELL)
6 # Use bash, not whatever shell somebody has installed as /bin/sh
7 # This is repeated in config.mk, since envsetup.sh runs that file
12 # this turns off the suffix rules built into make
15 # If a rule fails, delete $@.
18 # Figure out where we are.
19 #TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST)))
20 #TOP := $(patsubst %/,%,$(TOP))
22 # TOPDIR is the normal variable you should use, because
23 # if we are executing relative to the current directory
24 # it can be "", whereas TOP must be "." which causes
25 # pattern matching probles when make strips off the
26 # trailing "./" from paths in various places.
33 # check for broken versions of make
34 ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") = 3.81))
35 $(warning ********************************************************************************)
36 $(warning * You are using version $(MAKE_VERSION) of make.)
37 $(warning * Android can only be built by version 3.81.)
38 $(warning * see http://source.android.com/source/download.html)
39 $(warning ********************************************************************************)
46 BUILD_SYSTEM := $(TOPDIR)build/core
48 # This is the default target. It must be the first declared target.
53 # Used to force goals to build. Only use for conditionally defined goals.
57 # Targets that provide quick help on the build system.
58 include $(BUILD_SYSTEM)/help.mk
60 # Set up various standard variables based on configuration
61 # and host information.
62 include $(BUILD_SYSTEM)/config.mk
64 # This allows us to force a clean build - included after the config.make
65 # environment setup is done, but before we generate any dependencies. This
66 # file does the rm -rf inline so the deps which are all done below will
67 # be generated correctly
68 include $(BUILD_SYSTEM)/cleanbuild.mk
70 VERSION_CHECK_SEQUENCE_NUMBER := 2
71 -include $(OUT_DIR)/versions_checked.mk
72 ifneq ($(VERSION_CHECK_SEQUENCE_NUMBER),$(VERSIONS_CHECKED))
74 $(info Checking build tools versions...)
76 ifeq ($(BUILD_OS),linux)
77 build_arch := $(shell uname -m)
78 ifneq (64,$(findstring 64,$(build_arch)))
79 $(warning ************************************************************)
80 $(warning You are attempting to build on a 32-bit system.)
81 $(warning Only 64-bit build environments are supported beyond froyo/2.2.)
82 $(warning ************************************************************)
87 ifneq ($(HOST_OS),windows)
88 ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc)
89 # check for a case sensitive file system
90 ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \
91 echo a > $(OUT_DIR)/casecheck.txt; \
92 echo B > $(OUT_DIR)/CaseCheck.txt; \
93 cat $(OUT_DIR)/casecheck.txt))
94 $(warning ************************************************************)
95 $(warning You are building on a case-insensitive filesystem.)
96 $(warning Please move your source tree to a case-sensitive filesystem.)
97 $(warning ************************************************************)
98 $(error Case-insensitive filesystems not supported)
103 # Make sure that there are no spaces in the absolute path; the
104 # build system can't deal with them.
105 ifneq ($(words $(shell pwd)),1)
106 $(warning ************************************************************)
107 $(warning You are building in a directory whose absolute path contains)
108 $(warning a space character:)
110 $(warning "$(shell pwd)")
112 $(warning Please move your source tree to a path that does not contain)
113 $(warning any spaces.)
114 $(warning ************************************************************)
115 $(error Directory names containing spaces not supported)
119 # Check for the correct version of java
120 java_version := $(shell java -version 2>&1 | head -n 1 | grep '[ "]1\.6[\. "$$]')
121 ifeq ($(strip $(java_version)),)
122 $(info ************************************************************)
123 $(info You are attempting to build with the incorrect version)
126 $(info Your version is: $(shell java -version 2>&1 | head -n 1).)
127 $(info The correct version is: 1.6.)
129 $(info Please follow the machine setup instructions at)
130 $(info $(space)$(space)$(space)$(space)http://source.android.com/source/download.html)
131 $(info ************************************************************)
135 # Check for the correct version of javac
136 javac_version := $(shell javac -version 2>&1 | head -n 1 | grep '[ "]1\.6[\. "$$]')
137 ifeq ($(strip $(javac_version)),)
138 $(info ************************************************************)
139 $(info You are attempting to build with the incorrect version)
142 $(info Your version is: $(shell javac -version 2>&1 | head -n 1).)
143 $(info The correct version is: 1.6.)
145 $(info Please follow the machine setup instructions at)
146 $(info $(space)$(space)$(space)$(space)http://source.android.com/source/download.html)
147 $(info ************************************************************)
151 $(shell echo 'VERSIONS_CHECKED := $(VERSION_CHECK_SEQUENCE_NUMBER)' \
152 > $(OUT_DIR)/versions_checked.mk)
155 # These are the modifier targets that don't do anything themselves, but
156 # change the behavior of the build.
157 # (must be defined before including definitions.make)
158 INTERNAL_MODIFIER_TARGETS := showcommands checkbuild all incrementaljavac
160 .PHONY: incrementaljavac
164 # ENABLE_INCREMENTALJAVAC should NOT be enabled by default, because change of
165 # a Java source file won't trigger rebuild of its dependent Java files.
166 # You can only enable it by adding "incrementaljavac" to your make command line.
167 # You are responsible for the correctness of the incremental build.
168 # This may decrease incremental build time dramatically for large Java libraries,
169 # such as core.jar, framework.jar, etc.
170 ENABLE_INCREMENTALJAVAC :=
171 ifneq (,$(filter incrementaljavac, $(MAKECMDGOALS)))
172 ENABLE_INCREMENTALJAVAC := true
173 MAKECMDGOALS := $(filter-out incrementaljavac, $(MAKECMDGOALS))
176 # Bring in standard build system definitions.
177 include $(BUILD_SYSTEM)/definitions.mk
179 # Bring in dex_preopt.mk
180 include $(BUILD_SYSTEM)/dex_preopt.mk
182 ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),)
183 $(info ***************************************************************)
184 $(info ***************************************************************)
185 $(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \
186 the make command line.)
187 # XXX The single quote on this line fixes gvim's syntax highlighting.
188 # Without which, the rest of this file is impossible to read.
189 $(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or)
191 $(info ***************************************************************)
192 $(info ***************************************************************)
196 ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),)
197 $(info ***************************************************************)
198 $(info ***************************************************************)
199 $(info Invalid variant: $(TARGET_BUILD_VARIANT)
200 $(info Valid values are: $(INTERNAL_VALID_VARIANTS)
201 $(info ***************************************************************)
202 $(info ***************************************************************)
207 ### In this section we set up the things that are different
208 ### between the build variants
213 ifneq ($(filter sdk win_sdk sdk_addon,$(MAKECMDGOALS)),)
220 user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT))
221 enable_target_debugging := true
222 ifneq (,$(user_variant))
223 # Target is secure in user builds.
224 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1
226 tags_to_install := user
227 ifeq ($(user_variant),userdebug)
228 # Pick up some extra useful tools
229 tags_to_install += debug
231 # Enable Dalvik lock contention logging for userdebug builds.
232 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.lockprof.threshold=500
234 # Disable debugging in plain user builds.
235 enable_target_debugging :=
238 # TODO: Remove this and the corresponding block in
239 # config/product_config.make once host-based Dalvik preoptimization is
241 ifneq (true,$(DISABLE_DEXPREOPT))
242 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true)
243 WITH_DEXPREOPT := true
247 # Disallow mock locations by default for user builds
248 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0
251 # Turn on checkjni for non-user builds.
252 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1
253 # Set device insecure for non-user builds.
254 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0
255 # Allow mock locations by default for non user builds
256 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1
257 endif # !user_variant
259 ifeq (true,$(strip $(enable_target_debugging)))
260 # Target is more debuggable and adbd is on by default
261 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1
262 # Include the debugging/testing OTA keys in this build.
263 INCLUDE_TEST_OTA_KEYS := true
264 else # !enable_target_debugging
265 # Target is less debuggable and adbd is off by default
266 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0
267 endif # !enable_target_debugging
271 ifeq ($(TARGET_BUILD_VARIANT),eng)
272 tags_to_install := user debug eng
273 # Don't require the setup wizard on eng builds
274 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\
275 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) \
276 ro.setupwizard.mode=OPTIONAL
281 ifeq ($(TARGET_BUILD_VARIANT),tests)
282 tags_to_install := user debug eng tests
289 # Detect if we want to build a repository for the SDK
290 sdk_repo_goal := $(strip $(filter sdk_repo,$(MAKECMDGOALS)))
291 MAKECMDGOALS := $(strip $(filter-out sdk_repo,$(MAKECMDGOALS)))
293 ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1)
294 $(error The 'sdk' target may not be specified with any other targets)
297 # TODO: this should be eng I think. Since the sdk is built from the eng
299 tags_to_install := user debug eng
300 ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true
301 ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes
305 BUILD_WITHOUT_PV := true
309 ifneq ($(filter dalvik.gc.type-precise,$(PRODUCT_TAGS)),)
310 # Enabling type-precise GC results in larger optimized DEX files. The
311 # additional storage requirements for ".odex" files can cause /system
312 # to overflow on some devices, so this is configured separately for
314 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.dexopt-flags=m=y
317 ifneq ($(BUILD_TINY_ANDROID),true)
318 # Install an apns-conf.xml file if one's not already being installed.
319 ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES)))
320 PRODUCT_COPY_FILES += \
321 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml
322 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),)
323 $(warning implicitly installing apns-conf_sdk.xml)
328 ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android
330 # enable vm tracing in files for now to help track
331 # the cause of ANRs in the content process
332 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt
334 # ------------------------------------------------------------
335 # Define a function that, given a list of module tags, returns
336 # non-empty if that module should be installed in /system.
338 # For most goals, anything not tagged with the "tests" tag should
339 # be installed in /system.
340 define should-install-to-system
341 $(if $(filter tests,$(1)),,true)
345 # For the sdk goal, anything with the "samples" tag should be
346 # installed in /data even if that module also has "eng"/"debug"/"user".
347 define should-install-to-system
348 $(if $(filter samples tests,$(1)),,true)
353 # If they only used the modifier goals (showcommands, checkbuild), we'll actually
354 # build the default target.
355 ifeq ($(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS)),)
356 .PHONY: $(INTERNAL_MODIFIER_TARGETS)
357 $(INTERNAL_MODIFIER_TARGETS): $(DEFAULT_GOAL)
360 # These targets are going to delete stuff, don't bother including
361 # the whole directory tree if that's all we're going to do
362 ifeq ($(MAKECMDGOALS),clean)
365 ifeq ($(MAKECMDGOALS),clobber)
368 ifeq ($(MAKECMDGOALS),dataclean)
371 ifeq ($(MAKECMDGOALS),installclean)
375 # Bring in all modules that need to be built.
376 ifneq ($(dont_bother),true)
378 ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc)
380 $(info Building the SDK under darwin-ppc is actually obsolete and unsupported.)
384 ifeq ($(HOST_OS),windows)
388 ifeq ($(SDK_ONLY),true)
390 # ----- SDK for Windows ------
391 # These configure the build targets that are available for the SDK under Windows.
392 # The first section defines all the C/C++ tools that can be compiled in C/C++,
393 # the second section defines all the Java ones (assuming javac is available.)
398 build/tools/zipalign \
401 dalvik/tools/dmtracedump \
402 dalvik/tools/hprof-conv \
404 development/tools/etc1tool \
405 development/tools/line_endings \
412 external/sqlite/dist \
416 sdk/emulator/mksdcard \
419 system/core/fastboot \
420 system/core/libcutils \
422 system/core/libzipfile
424 # The following can only be built if "javac" is available.
425 # This check is used when building parts of the SDK under Cygwin.
426 ifneq (,$(shell which javac 2>/dev/null))
428 build/tools/signapk \
436 sdk/hierarchyviewer2 \
445 development/tools/mkstubs \
448 $(warning SDK_ONLY: javac not available.)
451 # Exclude tools/acp when cross-compiling windows under linux
452 ifeq ($(findstring Linux,$(UNAME)),)
453 subdirs += build/tools/acp
457 ifeq ($(BUILD_TINY_ANDROID), true)
459 # TINY_ANDROID is a super-minimal build configuration, handy for board
460 # bringup and very low level debugging
465 system/extras/ext4_utils \
470 build/tools/apriori \
476 else # !BUILD_TINY_ANDROID
479 # Typical build; include any Android.mk files we can find.
485 endif # !BUILD_TINY_ANDROID
489 # Before we go and include all of the module makefiles, stash away
490 # the PRODUCT_* values so that later we can verify they are not modified.
491 stash_product_vars:=true
492 ifeq ($(stash_product_vars),true)
493 $(call stash-product-vars, __STASHED)
496 ifneq ($(ONE_SHOT_MAKEFILE),)
497 # We've probably been invoked by the "mm" shell function
498 # with a subdirectory's makefile.
499 include $(ONE_SHOT_MAKEFILE)
500 # Change CUSTOM_MODULES to include only modules that were
501 # defined by this makefile; this will install all of those
502 # modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE
503 # so that the modules will be installed in the same place they
504 # would have been with a normal make.
505 CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS)))
507 # Stub out the notice targets, which probably aren't defined
508 # when using ONE_SHOT_MAKEFILE.
512 else # ONE_SHOT_MAKEFILE
515 # Include all of the makefiles in the system
518 # Can't use first-makefiles-under here because
519 # --mindepth=2 makes the prunes not work.
520 subdir_makefiles := \
521 $(shell build/tools/findleaves.py --prune=out --prune=.repo --prune=.git $(subdirs) Android.mk)
523 include $(subdir_makefiles)
524 endif # ONE_SHOT_MAKEFILE
526 ifeq ($(stash_product_vars),true)
527 $(call assert-product-vars, __STASHED)
530 include $(BUILD_SYSTEM)/legacy_prebuilts.mk
531 ifneq ($(filter-out $(GRANDFATHERED_ALL_PREBUILT),$(strip $(notdir $(ALL_PREBUILT)))),)
532 $(warning *** Some files have been added to ALL_PREBUILT.)
534 $(warning * ALL_PREBUILT is a deprecated mechanism that)
535 $(warning * should not be used for new files.)
536 $(warning * As an alternative, use PRODUCT_COPY_FILES in)
537 $(warning * the appropriate product definition.)
538 $(warning * build/target/product/core.mk is the product)
539 $(warning * definition used in all products.)
541 $(foreach bad_prebuilt,$(filter-out $(GRANDFATHERED_ALL_PREBUILT),$(strip $(notdir $(ALL_PREBUILT)))),$(warning * unexpected $(bad_prebuilt) in ALL_PREBUILT))
543 $(error ALL_PREBUILT contains unexpected files)
546 # -------------------------------------------------------------------
547 # All module makefiles have been included at this point.
548 # -------------------------------------------------------------------
550 # -------------------------------------------------------------------
551 # Include any makefiles that must happen after the module makefiles
552 # have been included.
553 # TODO: have these files register themselves via a global var rather
554 # than hard-coding the list here.
556 # Only include this during a full build, otherwise we can't be
557 # guaranteed that any policies were included.
558 -include frameworks/policies/base/PolicyConfig.mk
561 # -------------------------------------------------------------------
562 # Fix up CUSTOM_MODULES to refer to installed files rather than
563 # just bare module names. Leave unknown modules alone in case
564 # they're actually full paths to a particular file.
565 known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES))
566 unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES))
568 $(call module-installed-files,$(known_custom_modules)) \
569 $(unknown_custom_modules)
571 # -------------------------------------------------------------------
572 # Define dependencies for modules that require other modules.
573 # This can only happen now, after we've read in all module makefiles.
575 # TODO: deal with the fact that a bare module name isn't
576 # unambiguous enough. Maybe declare short targets like
577 # APPS:Quake or HOST:SHARED_LIBRARIES:libutils.
578 # BUG: the system image won't know to depend on modules that are
579 # brought in as requirements of other modules.
580 define add-required-deps
583 $(foreach m,$(ALL_MODULES), \
584 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \
586 $(eval r := $(call module-installed-files,$(r))) \
587 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \
595 # -------------------------------------------------------------------
596 # Figure out our module sets.
598 # Of the modules defined by the component makefiles,
599 # determine what we actually want to build.
600 Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \
602 # TODO: Remove the 3 places in the tree that use
603 # ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list.
606 # The base list of modules to build for this product is specified
607 # by the appropriate product definition file, which was included
608 # by product_config.make.
609 user_PACKAGES := $(call module-installed-files, \
610 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES))
612 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):)
613 $(foreach p,$(user_PACKAGES),$(info : $(p)))
617 # We're not doing a full build, and are probably only including
618 # a subset of the module makefiles. Don't try to build any modules
619 # requested by the product, because we probably won't have rules
623 # Use tags to get the non-APPS user modules. Use the product
624 # definition files to get the APPS user modules.
625 user_MODULES := $(sort $(call get-tagged-modules,user shell_$(TARGET_SHELL)))
626 user_MODULES := $(user_MODULES) $(user_PACKAGES)
628 eng_MODULES := $(sort $(call get-tagged-modules,eng))
629 debug_MODULES := $(sort $(call get-tagged-modules,debug))
630 tests_MODULES := $(sort $(call get-tagged-modules,tests))
632 ifeq ($(strip $(tags_to_install)),)
633 $(error ASSERTION FAILED: tags_to_install should not be empty)
635 modules_to_install := $(sort $(Default_MODULES) \
636 $(foreach tag,$(tags_to_install),$($(tag)_MODULES)))
638 # Some packages may override others using LOCAL_OVERRIDES_PACKAGES.
639 # Filter out (do not install) any overridden packages.
640 overridden_packages := $(call get-package-overrides,$(modules_to_install))
641 ifdef overridden_packages
642 # old_modules_to_install := $(modules_to_install)
643 modules_to_install := \
644 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \
645 $(modules_to_install))
647 #$(error filtered out
648 # $(filter-out $(modules_to_install),$(old_modules_to_install)))
650 # Don't include any GNU targets in the SDK. It's ok (and necessary)
651 # to build the host tools, but nothing that's going to be installed
652 # on the target (including static libraries).
654 target_gnu_MODULES := \
656 $(TARGET_OUT_INTERMEDIATES)/% \
658 $(TARGET_OUT_DATA)/%, \
659 $(sort $(call get-tagged-modules,gnu)))
660 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d)))
661 modules_to_install := \
662 $(filter-out $(target_gnu_MODULES),$(modules_to_install))
666 # build/core/Makefile contains extra stuff that we don't want to pollute this
667 # top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES
668 # contains everything that's built during the current make, but it also further
669 # extends ALL_DEFAULT_INSTALLED_MODULES.
670 ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install)
671 include $(BUILD_SYSTEM)/Makefile
672 modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES))
673 ALL_DEFAULT_INSTALLED_MODULES :=
677 # These are additional goals that we build, in order to make sure that there
678 # is as little code as possible in the tree that doesn't build.
679 modules_to_check := $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).CHECKED))
681 # If you would like to build all goals, and not skip any intermediate
682 # steps, you can pass the "all" modifier goal on the commandline.
683 ifneq ($(filter all,$(MAKECMDGOALS)),)
684 modules_to_check += $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).BUILT))
687 # for easier debugging
688 modules_to_check := $(sort $(modules_to_check))
689 #$(error modules_to_check $(modules_to_check))
691 # -------------------------------------------------------------------
692 # This is used to to get the ordering right, you can also use these,
693 # but they're considered undocumented, so don't complain if their
696 prebuilt: $(ALL_PREBUILT)
698 # An internal target that depends on all copied headers
699 # (see copy_headers.make). Other targets that need the
700 # headers to be copied first can depend on this target.
701 .PHONY: all_copied_headers
702 all_copied_headers: ;
704 $(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers
706 # All the droid stuff, in directories
709 $(modules_to_install) \
710 $(modules_to_check) \
711 $(INSTALLED_ANDROID_INFO_TXT_TARGET)
713 # -------------------------------------------------------------------
716 checkbuild: $(modules_to_check)
719 ramdisk: $(INSTALLED_RAMDISK_TARGET)
721 .PHONY: systemtarball
722 systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET)
725 boottarball: $(INSTALLED_BOOTTARBALL_TARGET)
727 .PHONY: userdataimage
728 userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET)
730 ifneq (,$(filter userdataimage, $(MAKECMDGOALS)))
731 $(call dist-for-goals, userdataimage, $(BUILT_USERDATAIMAGE_TARGET))
734 .PHONY: userdatatarball
735 userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET)
738 bootimage: $(INSTALLED_BOOTIMAGE_TARGET)
740 ifeq ($(BUILD_TINY_ANDROID), true)
741 INSTALLED_RECOVERYIMAGE_TARGET :=
744 # Build files and then package it into the rom formats
748 $(INSTALLED_BOOTIMAGE_TARGET) \
749 $(INSTALLED_RECOVERYIMAGE_TARGET) \
750 $(INSTALLED_USERDATAIMAGE_TARGET) \
751 $(INSTALLED_FILES_FILE)
753 # dist_files only for putting your library into the dist directory with a full build.
756 ifeq ($(EMMA_INSTRUMENT),true)
757 $(call dist-for-goals, dist_files, $(EMMA_META_ZIP))
760 # Dist for droid if droid is among the cmd goals, or no cmd goal is given.
761 ifneq ($(filter droid,$(MAKECMDGOALS))$(filter ||,|$(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))|),)
763 ifneq ($(TARGET_BUILD_APPS),)
764 # If this build is just for apps, only build apps and not the full system by default.
766 unbundled_build_modules :=
767 ifneq ($(filter all,$(TARGET_BUILD_APPS)),)
768 # If they used the magic goal "all" then build all apps in the source tree.
769 unbundled_build_modules := $(foreach m,$(sort $(ALL_MODULES)),$(if $(filter APPS,$(ALL_MODULES.$(m).CLASS)),$(m)))
771 unbundled_build_modules := $(TARGET_BUILD_APPS)
774 # dist the unbundled app.
775 $(call dist-for-goals,apps_only, \
776 $(foreach m,$(unbundled_build_modules),$(ALL_MODULES.$(m).INSTALLED)) \
780 apps_only: $(unbundled_build_modules)
784 else # TARGET_BUILD_APPS
785 $(call dist-for-goals, droidcore, \
786 $(INTERNAL_UPDATE_PACKAGE_TARGET) \
787 $(INTERNAL_OTA_PACKAGE_TARGET) \
790 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \
791 $(PACKAGE_STATS_FILE) \
792 $(INSTALLED_FILES_FILE) \
793 $(INSTALLED_BUILD_PROP_TARGET) \
794 $(BUILT_TARGET_FILES_PACKAGE) \
795 $(INSTALLED_ANDROID_INFO_TXT_TARGET) \
796 $(INSTALLED_RAMDISK_TARGET) \
799 # Building a full system-- the default is to build droidcore
800 droid: droidcore dist_files
802 endif # TARGET_BUILD_APPS
803 endif # droid in $(MAKECMDGOALS)
809 # phony target that include any targets in $(ALL_MODULES)
811 all_modules: $(ALL_MODULES)
817 ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET)
818 sdk: $(ALL_SDK_TARGETS)
819 ifneq ($(filter sdk win_sdk,$(MAKECMDGOALS)),)
820 $(call dist-for-goals,sdk win_sdk, \
827 sample_MODULES := $(sort $(call get-tagged-modules,samples))
828 sample_APKS_DEST_PATH := $(TARGET_COMMON_OUT_ROOT)/samples
829 sample_APKS_COLLECTION := \
830 $(foreach module,$(sample_MODULES),$(sample_APKS_DEST_PATH)/$(notdir $(module)))
831 $(foreach module,$(sample_MODULES),$(eval $(call \
832 copy-one-file,$(module),$(sample_APKS_DEST_PATH)/$(notdir $(module)))))
833 sample_ADDITIONAL_INSTALLED := \
834 $(filter-out $(modules_to_install) $(modules_to_check) $(ALL_PREBUILT),$(sample_MODULES))
835 samplecode: $(sample_APKS_COLLECTION)
836 @echo "Collect sample code apks: $^"
837 # remove apks that are not intended to be installed.
838 rm -f $(sample_ADDITIONAL_INSTALLED)
841 findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET)
846 @echo "Entire build directory removed."
851 # The rules for dataclean and installclean are defined in cleanbuild.mk.
853 #xxx scrape this from ALL_MODULE_NAME_TAGS
856 @echo "Available sub-modules:"
857 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \
858 tr -s ' ' '\n' | sort -u | $(COLUMN)