2 # Use bash, not whatever shell somebody has installed as /bin/sh
3 # This is repeated in config.mk, since envsetup.sh runs that file
7 # this turns off the suffix rules built into make
10 # If a rule fails, delete $@.
13 # Figure out where we are.
14 #TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST)))
15 #TOP := $(patsubst %/,%,$(TOP))
17 # TOPDIR is the normal variable you should use, because
18 # if we are executing relative to the current directory
19 # it can be "", whereas TOP must be "." which causes
20 # pattern matching probles when make strips off the
21 # trailing "./" from paths in various places.
28 # check for broken versions of make
29 ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81))
30 $(warning ********************************************************************************)
31 $(warning * You are using version $(MAKE_VERSION) of make.)
32 $(warning * You must upgrade to version 3.81 or greater.)
33 $(warning * see file://$(shell pwd)/docs/development-environment/machine-setup.html)
34 $(warning ********************************************************************************)
41 BUILD_SYSTEM := $(TOPDIR)build/core
43 # This is the default target. It must be the first declared target.
47 # Set up various standard variables based on configuration
48 # and host information.
49 include $(BUILD_SYSTEM)/config.mk
51 # This allows us to force a clean build - included after the config.make
52 # environment setup is done, but before we generate any dependencies. This
53 # file does the rm -rf inline so the deps which are all done below will
54 # be generated correctly
55 include $(BUILD_SYSTEM)/cleanbuild.mk
57 ifneq ($(HOST_OS),windows)
58 ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc)
59 # check for a case sensitive file system
60 ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \
61 echo a > $(OUT_DIR)/casecheck.txt; \
62 echo B > $(OUT_DIR)/CaseCheck.txt; \
63 cat $(OUT_DIR)/casecheck.txt))
64 $(warning ************************************************************)
65 $(warning You are building on a case-insensitive filesystem.)
66 $(warning Please move your source tree to a case-sensitive filesystem.)
67 $(warning ************************************************************)
68 $(error Case-insensitive filesystems not supported)
73 # Make sure that there are no spaces in the absolute path; the
74 # build system can't deal with them.
75 ifneq ($(words $(shell pwd)),1)
76 $(warning ************************************************************)
77 $(warning You are building in a directory whose absolute path contains)
78 $(warning a space character:)
80 $(warning "$(shell pwd)")
82 $(warning Please move your source tree to a path that does not contain)
83 $(warning any spaces.)
84 $(warning ************************************************************)
85 $(error Directory names containing spaces not supported)
88 # Set up version information.
89 include $(BUILD_SYSTEM)/version_defaults.mk
91 # These are the modifier targets that don't do anything themselves, but
92 # change the behavior of the build.
93 # (must be defined before including definitions.make)
94 INTERNAL_MODIFIER_TARGETS := showcommands
96 # Bring in standard build system definitions.
97 include $(BUILD_SYSTEM)/definitions.mk
99 ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),)
100 $(info ***************************************************************)
101 $(info ***************************************************************)
102 $(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \
103 the make command line.)
104 # XXX The single quote on this line fixes gvim's syntax highlighting.
105 # Without which, the rest of this file is impossible to read.
106 $(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or)
108 $(info ***************************************************************)
109 $(info ***************************************************************)
113 ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),)
114 $(info ***************************************************************)
115 $(info ***************************************************************)
116 $(info Invalid variant: $(TARGET_BUILD_VARIANT)
117 $(info Valid values are: $(INTERNAL_VALID_VARIANTS)
118 $(info ***************************************************************)
119 $(info ***************************************************************)
124 ### In this section we set up the things that are different
125 ### between the build variants
130 user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT))
131 enable_target_debugging := true
132 ifneq (,$(user_variant))
133 # Target is secure in user builds.
134 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1
136 tags_to_install := user
137 ifeq ($(user_variant),userdebug)
138 # Pick up some extra useful tools
139 tags_to_install += debug
141 # Disable debugging in plain user builds.
142 enable_target_debugging :=
145 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX.
146 # Also, remove the corresponding block in config/product_config.make.
147 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true)
148 WITH_DEXPREOPT := true
151 # Disallow mock locations by default for user builds
152 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0
155 # Turn on checkjni for non-user builds.
156 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1
157 # Set device insecure for non-user builds.
158 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0
159 # Allow mock locations by default for non user builds
160 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1
161 endif # !user_variant
163 ifeq (true,$(strip $(enable_target_debugging)))
164 # Target is more debuggable and adbd is on by default
165 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1
166 # Include the debugging/testing OTA keys in this build.
167 INCLUDE_TEST_OTA_KEYS := true
168 else # !enable_target_debugging
169 # Target is less debuggable and adbd is off by default
170 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0
171 endif # !enable_target_debugging
175 ifeq ($(TARGET_BUILD_VARIANT),eng)
176 tags_to_install := user debug eng
177 # Don't require the setup wizard on eng builds
178 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\
179 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES)))
184 ifeq ($(TARGET_BUILD_VARIANT),tests)
185 tags_to_install := user debug eng tests
190 ifneq ($(filter sdk,$(MAKECMDGOALS)),)
191 ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1)
192 $(error The 'sdk' target may not be specified with any other targets)
194 # TODO: this should be eng I think. Since the sdk is built from the eng
196 tags_to_install := user
197 ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true
198 ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes
200 # Enable sync for non-sdk builds only (sdk builds lack SubscribedFeedsProvider).
201 ADDITIONAL_BUILD_PROPERTIES += ro.config.sync=yes
204 # Install an apns-conf.xml file if one's not already being installed.
205 ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES)))
206 PRODUCT_COPY_FILES += \
207 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml
208 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),)
209 $(warning implicitly installing apns-conf_sdk.xml)
212 # If we're on an eng or tests build, but not on the sdk, and we have
213 # a better one, use that instead.
214 ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),)
215 ifeq ($(filter sdk,$(MAKECMDGOALS)),)
216 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml)
217 ifneq ($(strip $(apns_to_use)),)
218 PRODUCT_COPY_FILES := \
219 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \
220 $(strip $(apns_to_use)):system/etc/apns-conf.xml
225 ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android
227 # enable vm tracing in files for now to help track
228 # the cause of ANRs in the content process
229 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt
232 # ------------------------------------------------------------
233 # Define a function that, given a list of module tags, returns
234 # non-empty if that module should be installed in /system.
236 # For most goals, anything not tagged with the "tests" tag should
237 # be installed in /system.
238 define should-install-to-system
239 $(if $(filter tests,$(1)),,true)
242 ifneq (,$(filter sdk,$(MAKECMDGOALS)))
243 # For the sdk goal, anything with the "samples" tag should be
244 # installed in /data even if that module also has "eng"/"debug"/"user".
245 define should-install-to-system
246 $(if $(filter samples tests,$(1)),,true)
251 # If all they typed was make showcommands, we'll actually build
252 # the default target.
253 ifeq ($(MAKECMDGOALS),showcommands)
255 showcommands: $(DEFAULT_GOAL)
258 # These targets are going to delete stuff, don't bother including
259 # the whole directory tree if that's all we're going to do
260 ifeq ($(MAKECMDGOALS),clean)
263 ifeq ($(MAKECMDGOALS),clobber)
266 ifeq ($(MAKECMDGOALS),dataclean)
269 ifeq ($(MAKECMDGOALS),installclean)
273 # Bring in all modules that need to be built.
274 ifneq ($(dont_bother),true)
278 ifeq ($(HOST_OS),windows)
281 ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc)
285 ifeq ($(SDK_ONLY),true)
292 dalvik/tools/dmtracedump \
293 development/emulator/mksdcard \
294 development/tools/activitycreator \
295 development/tools/line_endings \
300 external/sqlite/dist \
302 frameworks/base/libs/utils \
303 frameworks/base/tools/aapt \
304 frameworks/base/tools/aidl \
306 system/core/fastboot \
307 system/core/libcutils \
309 system/core/libzipfile
311 # The following can only be built if "javac" is available.
312 # This check is used when building parts of the SDK under Cygwin.
313 ifneq (,$(shell which javac 2>/dev/null))
314 $(warning sdk-only: javac available.)
316 build/tools/signapk \
317 build/tools/zipalign \
321 development/tools/androidprefs \
322 development/tools/apkbuilder \
323 development/tools/jarutils \
324 development/tools/layoutlib_utils \
325 development/tools/ninepatch \
326 development/tools/sdkstats \
327 development/tools/sdkmanager \
329 frameworks/base/tools/layoutlib \
330 external/googleclient \
333 $(warning sdk-only: javac not available.)
336 # Exclude tools/acp when cross-compiling windows under linux
337 ifeq ($(findstring Linux,$(UNAME)),)
338 subdirs += build/tools/acp
342 ifeq ($(BUILD_TINY_ANDROID), true)
344 # TINY_ANDROID is a super-minimal build configuration, handy for board
345 # bringup and very low level debugging
347 INTERNAL_DEFAULT_DOCS_TARGETS :=
355 build/tools/apriori \
362 else # !BUILD_TINY_ANDROID
365 # Typical build; include any Android.mk files we can find.
367 INTERNAL_DEFAULT_DOCS_TARGETS := offline-sdk-docs
372 endif # !BUILD_TINY_ANDROID
376 # Can't use first-makefiles-under here because
377 # --mindepth=2 makes the prunes not work.
378 subdir_makefiles += \
379 $(shell build/tools/findleaves.sh --prune="./out" $(subdirs) Android.mk)
381 # Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)
382 # or under vendor/*/$(TARGET_DEVICE). Search in both places, but
383 # make sure only one exists.
384 # Real boards should always be associated with an OEM vendor.
387 $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \
388 vendor/*/$(TARGET_DEVICE)/BoardConfig.mk \
390 ifeq ($(board_config_mk),)
391 $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE))
393 ifneq ($(words $(board_config_mk)),1)
394 $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk))
396 include $(board_config_mk)
397 TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk)))
400 # Clean up/verify variables defined by the board config file.
401 TARGET_BOOTLOADER_BOARD_NAME := $(strip $(TARGET_BOOTLOADER_BOARD_NAME))
404 # Include all of the makefiles in the system
407 ifneq ($(ONE_SHOT_MAKEFILE),)
408 # We've probably been invoked by the "mm" shell function
409 # with a subdirectory's makefile.
410 include $(ONE_SHOT_MAKEFILE)
411 # Change CUSTOM_MODULES to include only modules that were
412 # defined by this makefile; this will install all of those
413 # modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE
414 # so that the modules will be installed in the same place they
415 # would have been with a normal make.
416 CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS),))
418 INTERNAL_DEFAULT_DOCS_TARGETS :=
419 # Stub out the notice targets, which probably aren't defined
420 # when using ONE_SHOT_MAKEFILE.
424 include $(subdir_makefiles)
426 # -------------------------------------------------------------------
427 # All module makefiles have been included at this point.
428 # -------------------------------------------------------------------
430 # -------------------------------------------------------------------
431 # Include any makefiles that must happen after the module makefiles
432 # have been included.
433 # TODO: have these files register themselves via a global var rather
434 # than hard-coding the list here.
436 # Only include this during a full build, otherwise we can't be
437 # guaranteed that any policies were included.
438 -include frameworks/policies/base/PolicyConfig.mk
441 # -------------------------------------------------------------------
442 # Fix up CUSTOM_MODULES to refer to installed files rather than
443 # just bare module names. Leave unknown modules alone in case
444 # they're actually full paths to a particular file.
445 known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES))
446 unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES))
448 $(call module-installed-files,$(known_custom_modules)) \
449 $(unknown_custom_modules)
451 # -------------------------------------------------------------------
452 # Define dependencies for modules that require other modules.
453 # This can only happen now, after we've read in all module makefiles.
455 # TODO: deal with the fact that a bare module name isn't
456 # unambiguous enough. Maybe declare short targets like
457 # APPS:Quake or HOST:SHARED_LIBRARIES:libutils.
458 # BUG: the system image won't know to depend on modules that are
459 # brought in as requirements of other modules.
460 define add-required-deps
463 $(foreach m,$(ALL_MODULES), \
464 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \
466 $(eval r := $(call module-installed-files,$(r))) \
467 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \
474 # -------------------------------------------------------------------
475 # Figure out our module sets.
477 # Of the modules defined by the component makefiles,
478 # determine what we actually want to build.
479 # If a module has the "restricted" tag on it, it
480 # poisons the rest of the tags and shouldn't appear
482 Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \
483 $(ALL_BUILT_MODULES) \
485 # TODO: Remove the 3 places in the tree that use
486 # ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list.
489 # The base list of modules to build for this product is specified
490 # by the appropriate product definition file, which was included
491 # by product_config.make.
492 user_PACKAGES := $(call module-installed-files, \
493 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES))
495 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):)
496 $(foreach p,$(user_PACKAGES),$(info : $(p)))
500 # We're not doing a full build, and are probably only including
501 # a subset of the module makefiles. Don't try to build any modules
502 # requested by the product, because we probably won't have rules
506 # Use tags to get the non-APPS user modules. Use the product
507 # definition files to get the APPS user modules.
508 user_MODULES := $(sort $(call get-tagged-modules,user,_class@APPS restricted))
509 user_MODULES := $(user_MODULES) $(user_PACKAGES)
511 eng_MODULES := $(sort $(call get-tagged-modules,eng,restricted))
512 debug_MODULES := $(sort $(call get-tagged-modules,debug,restricted))
513 tests_MODULES := $(sort $(call get-tagged-modules,tests,restricted))
515 ifeq ($(strip $(tags_to_install)),)
516 $(error ASSERTION FAILED: tags_to_install should not be empty)
518 modules_to_install := $(sort $(Default_MODULES) \
519 $(foreach tag,$(tags_to_install),$($(tag)_MODULES)))
521 # Some packages may override others using LOCAL_OVERRIDES_PACKAGES.
522 # Filter out (do not install) any overridden packages.
523 overridden_packages := $(call get-package-overrides,$(modules_to_install))
524 ifdef overridden_packages
525 # old_modules_to_install := $(modules_to_install)
526 modules_to_install := \
527 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \
528 $(modules_to_install))
530 #$(error filtered out
531 # $(filter-out $(modules_to_install),$(old_modules_to_install)))
533 # Don't include any GNU targets in the SDK. It's ok (and necessary)
534 # to build the host tools, but nothing that's going to be installed
535 # on the target (including static libraries).
536 ifneq ($(filter sdk,$(MAKECMDGOALS)),)
537 target_gnu_MODULES := \
539 $(TARGET_OUT_INTERMEDIATES)/% \
541 $(TARGET_OUT_DATA)/%, \
542 $(sort $(call get-tagged-modules,gnu)))
543 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d)))
544 modules_to_install := \
545 $(filter-out $(target_gnu_MODULES),$(modules_to_install))
549 # config/Makefile contains extra stuff that we don't want to pollute this
550 # top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES
551 # contains everything that's built during the current make, but it also further
552 # extends ALL_DEFAULT_INSTALLED_MODULES.
553 ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install)
554 include $(BUILD_SYSTEM)/Makefile
555 modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES))
556 ALL_DEFAULT_INSTALLED_MODULES :=
560 # -------------------------------------------------------------------
561 # This is used to to get the ordering right, you can also use these,
562 # but they're considered undocumented, so don't complain if their
565 prebuilt: $(ALL_PREBUILT)
567 # An internal target that depends on all copied headers
568 # (see copy_headers.make). Other targets that need the
569 # headers to be copied first can depend on this target.
570 .PHONY: all_copied_headers
571 all_copied_headers: ;
573 $(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers
575 # All the droid stuff, in directories
577 files: prebuilt $(modules_to_install) $(INSTALLED_ANDROID_INFO_TXT_TARGET)
579 # -------------------------------------------------------------------
582 ramdisk: $(INSTALLED_RAMDISK_TARGET)
584 .PHONY: systemtarball
585 systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET)
587 .PHONY: userdataimage
588 userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET)
590 .PHONY: userdatatarball
591 userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET)
594 bootimage: $(INSTALLED_BOOTIMAGE_TARGET)
596 ifeq ($(BUILD_TINY_ANDROID), true)
597 INSTALLED_RECOVERYIMAGE_TARGET :=
600 # Build files and then package it into the rom formats
604 $(INSTALLED_BOOTIMAGE_TARGET) \
605 $(INSTALLED_RECOVERYIMAGE_TARGET) \
606 $(INSTALLED_USERDATAIMAGE_TARGET) \
607 $(INTERNAL_DEFAULT_DOCS_TARGETS) \
608 $(INSTALLED_FILES_FILE)
610 # The actual files built by the droidcore target changes depending
611 # on the build variant.
613 droid tests: droidcore
615 $(call dist-for-goals, droid, \
616 $(INTERNAL_UPDATE_PACKAGE_TARGET) \
617 $(INTERNAL_OTA_PACKAGE_TARGET) \
620 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \
621 $(PACKAGE_STATS_FILE) \
622 $(INSTALLED_FILES_FILE) \
623 $(INSTALLED_BUILD_PROP_TARGET) \
624 $(BUILT_TARGET_FILES_PACKAGE) \
627 # Tests are installed in userdata.img. If we're building the tests
628 # variant, copy it for "make tests dist". Also copy a zip of the
629 # contents of userdata.img, so that people can easily extract a
631 ifeq ($(TARGET_BUILD_VARIANT),tests)
632 $(call dist-for-goals, droid, \
633 $(INSTALLED_USERDATAIMAGE_TARGET) \
634 $(BUILT_TESTS_ZIP_PACKAGE) \
642 ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET)
643 sdk: $(ALL_SDK_TARGETS)
644 $(call dist-for-goals,sdk,$(ALL_SDK_TARGETS))
647 findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET)
652 $(TARGET_COMMON_OUT_ROOT) \
654 $(HOST_COMMON_OUT_ROOT)
656 @for dir in $(dirs_to_clean) ; do \
657 echo "Cleaning $$dir..."; \
665 @echo "Entire build directory removed."
667 # The rules for dataclean and installclean are defined in cleanbuild.mk.
669 #xxx scrape this from ALL_MODULE_NAME_TAGS
672 @echo "Available sub-modules:"
673 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \
674 sed -e 's/ */\n/g' | sort -u | $(COLUMN)