resolved conflicts for merge of 7749a1c5 to jb-mr1-dev

[android-x86/frameworks-base.git] / core / res / res / values / config.xml

<?xml version="1.0" encoding="utf-8"?>
<!--
/*
** Copyright 2009, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
**     http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->

<!-- These resources are around just to allow their values to be customized
     for different hardware and product builds.  Do not translate. -->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
    <!-- Do not translate. Defines the slots for the right-hand side icons.  That is to say, the
         icons in the status bar that are not notifications. -->
    <string-array name="config_statusBarIcons">
       <item><xliff:g id="id">ime</xliff:g></item>
       <item><xliff:g id="id">sync_failing</xliff:g></item>
       <item><xliff:g id="id">sync_active</xliff:g></item>
       <item><xliff:g id="id">gps</xliff:g></item>
       <item><xliff:g id="id">bluetooth</xliff:g></item>
       <item><xliff:g id="id">nfc</xliff:g></item>
       <item><xliff:g id="id">tty</xliff:g></item>
       <item><xliff:g id="id">speakerphone</xliff:g></item>
       <item><xliff:g id="id">mute</xliff:g></item>
       <item><xliff:g id="id">volume</xliff:g></item>
       <item><xliff:g id="id">wifi</xliff:g></item>
       <item><xliff:g id="id">cdma_eri</xliff:g></item>
       <item><xliff:g id="id">data_connection</xliff:g></item>
       <item><xliff:g id="id">phone_evdo_signal</xliff:g></item>
       <item><xliff:g id="id">phone_signal</xliff:g></item>
       <item><xliff:g id="id">battery</xliff:g></item>
       <item><xliff:g id="id">alarm_clock</xliff:g></item>
       <item><xliff:g id="id">secure</xliff:g></item>
       <item><xliff:g id="id">clock</xliff:g></item>
    </string-array>

    <!-- Flag indicating whether the surface flinger has limited
         alpha compositing functionality in hardware.  If set, the window
         manager will disable alpha trasformation in animations where not
         strictly needed. -->
    <bool name="config_sf_limitedAlpha">false</bool>

    <!-- Default value used to block data calls if ims is not
         connected.  If you use the ims apn DCT will block
         any other apn from connecting until ims apn is connected-->
    <bool name="ImsConnectedDefaultValue">false</bool>

    <!-- Flag indicating whether the surface flinger is inefficient
         at performing a blur.  Used by parts of the UI to turn off
         the blur effect where it isn't worth the performance hit.
         As of Honeycomb, blurring is not supported anymore. -->
    <bool name="config_sf_slowBlur">true</bool>

    <!-- Flag indicating that the media framework should allow changing
         master volume stream and nothing else . -->
    <bool name="config_useMasterVolume">false</bool>

    <!-- Flag indicating that the media framework should support playing of sounds on volume
         key usage.  This adds noticeable additional overhead to volume key processing, so
         is disableable for products for which it is irrelevant. -->
    <bool name="config_useVolumeKeySounds">true</bool>

    <!-- Array of integer pairs controlling the rate at which the master volume changes
         in response to volume up and down key events.
         The first integer of each pair is compared against the current master volume
         (in range 0 to 100).
         The last pair with first integer <= the current volume is chosen,
         and the second integer of the pair indicates the amount to increase the master volume
         when volume up is pressed. -->
    <integer-array name="config_masterVolumeRamp">
        <item>0</item>  <item>5</item>  <!-- default: always increase volume by 5% -->
    </integer-array>

    <!-- The attenuation in dB applied to the sound effects played
         through AudioManager.playSoundEffect() when no volume is specified. -->
    <integer name="config_soundEffectVolumeDb">-6</integer>

    <!-- The attenuation in dB applied to the lock/unlock sounds. -->
    <integer name="config_lockSoundVolumeDb">-6</integer>

    <!-- Flag indicating whether the AUDIO_BECOMING_NOISY notification should
         be sent during a change to the audio output device. -->
    <bool name="config_sendAudioBecomingNoisy">true</bool>

    <!-- The duration (in milliseconds) of a short animation. -->
    <integer name="config_shortAnimTime">200</integer>

    <!-- The duration (in milliseconds) of a medium-length animation. -->
    <integer name="config_mediumAnimTime">400</integer>

    <!-- The duration (in milliseconds) of a long animation. -->
    <integer name="config_longAnimTime">500</integer>

    <!-- The duration (in milliseconds) of the activity open/close and fragment open/close animations. -->
    <integer name="config_activityShortDur">150</integer>
    <integer name="config_activityDefaultDur">220</integer>

    <!-- Duration for the dim animation behind a dialog.  This may be either
         a percentage, which is relative to the duration of the enter/open
         animation of the window being shown that is dimming behind, or it may
         be an integer for a constant duration. -->
    <fraction name="config_dimBehindFadeDuration">100%</fraction>

    <!-- The maximum width we would prefer dialogs to be.  0 if there is no
         maximum (let them grow as large as the screen).  Actual values are
         specified for -large and -xlarge configurations. -->
    <dimen name="config_prefDialogWidth">320dp</dimen>

    <!-- Enables or disables fading edges when marquee is enabled in TextView. -->
    <bool name="config_ui_enableFadingMarquee">true</bool>

    <!-- Whether dialogs should close automatically when the user touches outside
         of them.  This should not normally be modified. -->
    <bool name="config_closeDialogWhenTouchOutside">true</bool>

    <!-- The duration (in milliseconds) that the radio will scan for a signal
         when there's no network connection. If the scan doesn't timeout, use zero -->
    <integer name="config_radioScanningTimeout">0</integer>

    <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION.
         Please don't copy them, copy anything else. -->

    <!-- This string array should be overridden by the device to present a list of network
         attributes.  This is used by the connectivity manager to decide which networks can coexist
         based on the hardware -->
    <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
         [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
    <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
         before automatically restore the default connection.  Set -1 if the connection
         does not require auto-restore. -->
    <!-- the 6th element indicates boot-time dependency-met value. -->
    <string-array translatable="false" name="networkAttributes">
        <item>"wifi,1,1,1,-1,true"</item>
        <item>"mobile,0,0,0,-1,true"</item>
        <item>"mobile_mms,2,0,2,60000,true"</item>
        <item>"mobile_supl,3,0,2,60000,true"</item>
        <item>"mobile_hipri,5,0,3,60000,true"</item>
        <item>"mobile_fota,10,0,2,60000,true"</item>
        <item>"mobile_ims,11,0,2,60000,true"</item>
        <item>"mobile_cbs,12,0,2,60000,true"</item>
        <item>"wifi_p2p,13,1,0,-1,true"</item>
    </string-array>

    <!-- Array of ConnectivityManager.TYPE_xxxx constants for networks that may only
         be controlled by systemOrSignature apps.  -->
    <integer-array translatable="false" name="config_protectedNetworks">
        <item>10</item>
        <item>11</item>
        <item>12</item>
    </integer-array>

    <!-- This string array should be overridden by the device to present a list of radio
         attributes.  This is used by the connectivity manager to decide which networks can coexist
         based on the hardware -->
    <!-- An Array of "[ConnectivityManager connectionType],
                      [# simultaneous connection types]"  -->
    <string-array translatable="false" name="radioAttributes">
        <item>"1,1"</item>
        <item>"0,1"</item>
    </string-array>

    <!-- Set of NetworkInfo.getType() that reflect data usage. -->
    <integer-array translatable="false" name="config_data_usage_network_types">
        <item>0</item> <!-- TYPE_MOBILE -->
        <item>2</item> <!-- TYPE_MOBILE_MMS -->
        <item>3</item> <!-- TYPE_MOBILE_SUPL -->
        <item>4</item> <!-- TYPE_MOBILE_DUN -->
        <item>5</item> <!-- TYPE_MOBILE_HIPRI -->
        <item>10</item> <!-- TYPE_MOBILE_FOTA -->
        <item>11</item> <!-- TYPE_MOBILE_IMS -->
        <item>12</item> <!-- TYPE_MOBILE_CBS -->
    </integer-array>

    <!-- The maximum duration (in milliseconds) we expect a network transition to take -->
    <integer name="config_networkTransitionTimeout">60000</integer>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         USB interfaces.  If the device doesn't want to support tething over USB this should
         be empty.  An example would be "usb.*" -->
    <string-array translatable="false" name="config_tether_usb_regexs">
    </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
         should be empty.  An example would be "softap.*" -->
    <string-array translatable="false" name="config_tether_wifi_regexs">
    </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         WiMAX interfaces.  If the device doesn't want to support tethering over Wifi this
         should be empty.  An example would be "softap.*" -->
    <string-array translatable="false" name="config_tether_wimax_regexs">
    </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         bluetooth interfaces.  If the device doesn't want to support tethering over bluetooth this
         should be empty. -->
    <string-array translatable="false" name="config_tether_bluetooth_regexs">
    </string-array>

    <!-- Max number of Bluetooth tethering connections allowed. If this is
         updated config_tether_dhcp_range has to be updated appropriately. -->
    <integer translateable="false" name="config_max_pan_devices">5</integer>

    <!-- Dhcp range (min, max) to use for tethering purposes -->
    <string-array translatable="false" name="config_tether_dhcp_range">
    </string-array>

    <!-- Regex of wired ethernet ifaces -->
    <string translatable="false" name="config_ethernet_iface_regex">eth\\d</string>

    <!-- If the mobile hotspot feature requires provisioning, a package name and class name
        can be provided to launch a supported application that provisions the devices.

        Example Usage:

        String[] appDetails = getStringArray(R.array.config_mobile_hotspot_provision_app);
        Intent intent = new Intent(Intent.ACTION_MAIN);
        intent.setClassName(appDetails[0], appDetails[1]);
        startActivityForResult(intent, 0);

        public void onActivityResult(int requestCode, int resultCode, Intent intent) {
            super.onActivityResult(requestCode, resultCode, intent);
            if (requestCode == 0) {
                if (resultCode == Activity.RESULT_OK) {
                    //Mobile hotspot provisioning successful
                } else {
                    //Mobile hotspot provisioning failed
                }
            }

        See src/com/android/settings/TetherSettings.java for more details.
        -->
    <!-- The first element is the package name and the second element is the class name
         of the provisioning app -->
    <string-array translatable="false" name="config_mobile_hotspot_provision_app">
    <!--
        <item>com.example.provisioning</item>
        <item>com.example.provisioning.Activity</item>
    -->
    </string-array>

    <!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering -->
    <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
    <!== [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH -->
    <integer-array translatable="false" name="config_tether_upstream_types">
        <item>0</item>
        <item>1</item>
        <item>5</item>
        <item>7</item>
        <item>9</item>
    </integer-array>

    <!-- If the DUN connection for this CDMA device supports more than just DUN -->
    <!-- traffic you should list them here. -->
    <!-- If this device is not CDMA this is ignored.  If this list is empty on -->
    <!-- a DUN-requiring CDMA device, the DUN APN will just support just DUN. -->
    <string-array translatable="false" name="config_cdma_dun_supported_types">
    </string-array>

    <!-- String containing the apn value for tethering.  May be overriden by secure settings
         TETHER_DUN_APN.  Value is a comma separated series of strings:
         "name,apn,proxy,port,username,password,server,mmsc,mmsproxy,mmsport,mcc,mnc,auth,type"
         note that empty fields can be ommitted: "name,apn,,,,,,,,,310,260,,DUN" -->
    <string translatable="false" name="config_tether_apndata"></string>

    <!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
    <bool translatable="false" name="config_wifi_dual_band_support">false</bool>

    <!-- Boolean indicating whether the wifi chipset has p2p support -->
    <bool translatable="false" name="config_wifi_p2p_support">false</bool>
    <!-- Device type information conforming to Annex B format in WiFi Direct specification.
         The default represents a dual-mode smartphone -->
    <string translatable="false" name="config_wifi_p2p_device_type">10-0050F204-5</string>

    <!-- Boolean indicating whether the wifi chipset supports background scanning mechanism.
         This mechanism allows the host to remain in suspend state and the dongle to actively
         scan and wake the host when a configured SSID is detected by the dongle. This chipset
         capability can provide power savings when wifi needs to be always kept on. -->
    <bool translatable="false" name="config_wifi_background_scan_support">false</bool>

    <!-- Integer indicating wpa_supplicant scan interval in milliseconds -->
    <integer translatable="false" name="config_wifi_supplicant_scan_interval">15000</integer>

    <!-- Integer indicating the framework scan interval in milliseconds. This is used in the scenario
         where the chipset does not support background scanning (config_wifi_background_scan_suport
         is false) to set up a periodic wake up scan so that the device can connect to a new access
         point on the move. A value of 0 means no periodic scans will be used in the framework. -->
    <integer translatable="false" name="config_wifi_framework_scan_interval">300000</integer>

    <!-- Wifi driver stop delay, in milliseconds.
         Default value is 2 minutes. -->
    <integer translatable="false" name="config_wifi_driver_stop_delay">120000</integer>

    <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
         Software implementation will be used if config_hardware_auto_brightness_available is not set -->
    <bool name="config_automatic_brightness_available">false</bool>

    <!-- Don't name config resources like this.  It should look like config_annoyDianne -->
    <bool name="config_annoy_dianne">true</bool>

    <!-- XXXXXX END OF RESOURCES USING WRONG NAMING CONVENTION -->

    <!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
    <bool name="config_unplugTurnsOnScreen">false</bool>

    <!-- If this is true, the screen will fade off. -->
    <bool name="config_animateScreenLights">true</bool>

    <!-- If this is true, key chords can be used to take a screenshot on the device. -->
    <bool name="config_enableScreenshotChord">true</bool>

    <!-- If true, the screen can be rotated via the accelerometer in all 4
         rotations as the default behavior. -->
    <bool name="config_allowAllRotations">false</bool>

    <!-- If true, the direction rotation is applied to get to an application's requested
         orientation is reversed.  Normally, the model is that landscape is
         clockwise from portrait; thus on a portrait device an app requesting
         landscape will cause a clockwise rotation, and on a landscape device an
         app requesting portrait will cause a counter-clockwise rotation.  Setting
         true here reverses that logic. -->
    <bool name="config_reverseDefaultRotation">false</bool>

    <!-- The number of degrees to rotate the display when the keyboard is open.
         A value of -1 means no change in orientation by default. -->
    <integer name="config_lidOpenRotation">-1</integer>

    <!-- The number of degrees to rotate the display when the device is in a desk dock.
         A value of -1 means no change in orientation by default. -->
    <integer name="config_deskDockRotation">-1</integer>

    <!-- The number of degrees to rotate the display when the device is in a car dock.
         A value of -1 means no change in orientation by default. -->
    <integer name="config_carDockRotation">-1</integer>

    <!-- Control the default UI mode type to use when there is no other type override
         happening.  One of the following values (See Configuration.java):
             1  UI_MODE_TYPE_NORMAL
             4  UI_MODE_TYPE_TELEVISION
             5  UI_MODE_TYPE_APPLIANCE
         Any other values will have surprising consequences. -->
    <integer name="config_defaultUiModeType">1</integer>

    <!-- Control whether being in the desk dock (and powered) always
         keeps the screen on.  By default it stays on when plugged in to
         AC.  0 will not keep it on; or together 1 to stay on when plugged
         in to AC and 2 to stay on when plugged in to USB.  (So 3 for both.) -->
    <integer name="config_deskDockKeepsScreenOn">1</integer>

    <!-- Control whether being in the car dock (and powered) always
         keeps the screen on.  By default it stays on when plugged in to
         AC.  0 will not keep it on; or together 1 to stay on when plugged
         in to AC and 2 to stay on when plugged in to USB.  (So 3 for both.) -->
    <integer name="config_carDockKeepsScreenOn">1</integer>

    <!-- Control whether being in the desk dock should enable accelerometer
         based screen orientation.  This defaults to true because it is
         common for desk docks to be sold in a variety of form factors
         with different orientations.  Since we cannot always tell these docks
         apart and the docks cannot report their true orientation on their own,
         we rely on gravity to determine the effective orientation. -->
    <bool name="config_deskDockEnablesAccelerometer">true</bool>

    <!-- Control whether being in the car dock should enable accelerometer based
         screen orientation.  This defaults to true because putting a device in
         a car dock make the accelerometer more a physical input (like a lid). -->
    <bool name="config_carDockEnablesAccelerometer">true</bool>

    <!-- Indicate whether the lid state impacts the accessibility of
         the physical keyboard.  0 means it doesn't, 1 means it is accessible
         when the lid is open, 2 means it is accessible when the lid is
         closed.  The default is 0. -->
    <integer name="config_lidKeyboardAccessibility">0</integer>

    <!-- Indicate whether the lid state impacts the accessibility of
         the navigation buttons.  0 means it doesn't, 1 means it is accessible
         when the lid is open, 2 means it is accessible when the lid is
         closed.  The default is 0. -->
    <integer name="config_lidNavigationAccessibility">0</integer>

    <!-- Indicate whether closing the lid causes the device to go to sleep and opening
         it causes the device to wake up.
         The default is false. -->
    <bool name="config_lidControlsSleep">false</bool>

    <!-- Control the behavior when the user long presses the power button.
            0 - Nothing
            1 - Global actions menu
            2 - Power off (with confirmation)
    -->
    <integer name="config_longPressOnPowerBehavior">1</integer>

    <!-- Indicate whether the SD card is accessible without removing the battery. -->
    <bool name="config_batterySdCardAccessibility">false</bool>

    <!-- List of file paths for USB host busses to exclude from USB host support.
         For example, if the first USB bus on the device is used to communicate
         with the modem or some other restricted hardware, add "/dev/bus/usb/001/"
         to this list.  If this is empty, no parts of the host USB bus will be excluded.
    -->
    <string-array name="config_usbHostBlacklist" translatable="false">
    </string-array>

    <!-- List of paths to serial ports that are available to the serial manager.
         for example, /dev/ttyUSB0
    -->
    <string-array translatable="false" name="config_serialPorts">
    </string-array>

    <!-- Vibrator pattern for feedback about a long screen/key press -->
    <integer-array name="config_longPressVibePattern">
        <item>0</item>
        <item>1</item>
        <item>20</item>
        <item>21</item>
    </integer-array>

    <!-- Vibrator pattern for feedback about touching a virtual key -->
    <integer-array name="config_virtualKeyVibePattern">
        <item>0</item>
        <item>10</item>
        <item>20</item>
        <item>30</item>
    </integer-array>

    <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
    <integer-array name="config_keyboardTapVibePattern">
        <item>40</item>
    </integer-array>

    <!-- Vibrator pattern for feedback about booting with safe mode disabled -->
    <integer-array name="config_safeModeDisabledVibePattern">
        <item>0</item>
        <item>1</item>
        <item>20</item>
        <item>21</item>
    </integer-array>

    <!-- Vibrator pattern for feedback about booting with safe mode disabled -->
    <integer-array name="config_safeModeEnabledVibePattern">
        <item>0</item>
        <item>1</item>
        <item>20</item>
        <item>21</item>
        <item>500</item>
        <item>600</item>
    </integer-array>

    <!-- Vibrator pattern for feedback about hitting a scroll barrier -->
    <integer-array name="config_scrollBarrierVibePattern">
        <item>0</item>
        <item>15</item>
        <item>10</item>
        <item>10</item>
    </integer-array>

    <bool name="config_use_strict_phone_number_comparation">false</bool>

    <!-- Display low battery warning when battery level dips to this value.
         Also, the battery stats are flushed to disk when we hit this level.  -->
    <integer name="config_criticalBatteryWarningLevel">4</integer>

    <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. -->
    <integer name="config_shutdownBatteryTemperature">680</integer>

    <!-- Display low battery warning when battery level dips to this value -->
    <!-- Display low battery warning when battery level dips to this value -->
    <integer name="config_lowBatteryWarningLevel">15</integer>

    <!-- Close low battery warning when battery level reaches this value -->
    <integer name="config_lowBatteryCloseWarningLevel">20</integer>

    <!-- Default color for notification LED. -->
    <color name="config_defaultNotificationColor">#ffffffff</color>

    <!-- Default LED on time for notification LED in milliseconds. -->
    <integer name="config_defaultNotificationLedOn">500</integer>

    <!-- Default LED off time for notification LED in milliseconds. -->
    <integer name="config_defaultNotificationLedOff">2000</integer>

    <!-- Default value for led color when battery is low on charge -->
    <integer name="config_notificationsBatteryLowARGB">0xFFFF0000</integer>

    <!-- Default value for led color when battery is medium charged -->
    <integer name="config_notificationsBatteryMediumARGB">0xFFFFFF00</integer>

    <!-- Default value for led color when battery is fully charged -->
    <integer name="config_notificationsBatteryFullARGB">0xFF00FF00</integer>

    <!-- Default value for LED on time when the battery is low on charge in miliseconds -->
    <integer name="config_notificationsBatteryLedOn">125</integer>

    <!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
    <bool name="config_intrusiveNotificationLed">false</bool>

    <!-- Default value for LED off time when the battery is low on charge in miliseconds -->
    <integer name="config_notificationsBatteryLedOff">2875</integer>

    <!-- Allow the menu hard key to be disabled in LockScreen on some devices -->
    <bool name="config_disableMenuKeyInLockScreen">false</bool>

    <!-- Don't show lock screen before unlock screen (PIN/pattern/password) -->
    <bool name="config_enableLockBeforeUnlockScreen">false</bool>

    <!-- Diable lockscreen rotation by default -->
    <bool name="config_enableLockScreenRotation">false</bool>

    <!-- Enable puk unlockscreen by default.
         If unlock screen is disabled, the puk should be unlocked through Emergency Dialer -->
    <bool name="config_enable_puk_unlock_screen">true</bool>

    <!-- Enable emergency call when sim is locked or puk locked. Some countries/carriers do not
         allow emergency calls to be placed without the IMSI, which is locked in the SIM.
         If so, this should be set to 'false' in an overlay. -->
    <bool name="config_enable_emergency_call_while_sim_locked">true</bool>

    <!-- Control the behavior when the user long presses the home button.
            0 - Nothing
            1 - Recent apps dialog
            2 - Recent apps view in SystemUI
         This needs to match the constants in
         policy/src/com/android/internal/policy/impl/PhoneWindowManager.java
    -->
    <integer name="config_longPressOnHomeBehavior">2</integer>

    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
         The N entries of this array define N + 1 control points as follows:

         Point 1:        LUX <= 0 (implicit)
         Point 2:        0 < level[1] == LUX < level[2]
         ...
         Point N:        level[N - 1] == LUX < level[N]
         Point N + 1:    level[N] <= LUX < infinity

         The control points must be strictly increasing.  Each control point
         corresponds to an entry in the brightness backlight values arrays.
         For example, if LUX == level[1] (first element of the levels array)
         then the brightness will be determined by value[1] (first element
         of the brightness values array).

         Spline interpolation is used to determine the auto-brightness
         backlight values for LUX levels between these control points.

         Must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessLevels">
    </integer-array>

    <!-- Minimum screen brightness setting allowed by the power manager.
         The user is forbidden from setting the brightness below this level. -->
    <integer name="config_screenBrightnessSettingMinimum">10</integer>

    <!-- Maximum screen brightness allowed by the power manager.
         The user is forbidden from setting the brightness above this level. -->
    <integer name="config_screenBrightnessSettingMaximum">255</integer>

    <!-- Default screen brightness setting.
         Must be in the range specified by minimum and maximum. -->
    <integer name="config_screenBrightnessSettingDefault">102</integer>

    <!-- Screen brightness used to dim the screen when the user activity
         timeout expires.  May be less than the minimum allowed brightness setting
         that can be set by the user. -->
    <integer name="config_screenBrightnessDim">10</integer>

    <!-- Array of output values for LCD backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
         The brightness values must be between 0 and 255 and be non-decreasing.
         This must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessLcdBacklightValues">
    </integer-array>

    <!-- Array of output values for button backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
         The brightness values must be between 0 and 255 and be non-decreasing.
         This must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessButtonBacklightValues">
    </integer-array>

    <!-- Array of output values for keyboard backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
         The brightness values must be between 0 and 255 and be non-decreasing.
         This must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessKeyboardBacklightValues">
    </integer-array>

    <!-- Amount of time it takes for the light sensor to warm up in milliseconds.
         For this time after the screen turns on, the Power Manager
         will not debounce light sensor readings -->
    <integer name="config_lightSensorWarmupTime">0</integer>

    <!-- Enables swipe versus poly-finger touch disambiguation in the KeyboardView -->
    <bool name="config_swipeDisambiguation">true</bool>

    <!-- Specifies the amount of time to disable virtual keys after the screen is touched
         in order to filter out accidental virtual key presses due to swiping gestures
         or taps near the edge of the display.  May be 0 to disable the feature.
         It is recommended that this value be no more than 250 ms.
         This feature should be disabled for most devices. -->
    <integer name="config_virtualKeyQuietTimeMillis">0</integer>

    <!-- Component name of the default wallpaper. This will be ImageWallpaper if not
         specified -->
    <string name="default_wallpaper_component" translatable="false">@null</string>

    <!-- True if WallpaperService is enabled -->
    <bool name="config_enableWallpaperService">true</bool>

    <!-- Package name(s) containing location provider support.
         These packages can contain services implementing location providers,
         such as the Geocode Provider, Network Location Provider, and
         Fused Location Provider. They will each be searched for
         service components implementing these providers.
         It is strongly recommended that the packages explicitly named
         below are on the system image, so that they will not map to
         a 3rd party application.
         The location framework also has support for installation
         of new location providers at run-time. The new package does not
         have to be explicitly listed here, however it must have a signature
         that matches the signature of at least one package on this list.
         Platforms should overlay additional packages in
         config_overlay_locationProviderPackageNames, instead of overlaying
         this config, if they only want to append packages and not replace
         the entire array.
         -->
    <string-array name="config_locationProviderPackageNames" translatable="false">
        <item>com.android.location.fused</item>
    </string-array>

    <!-- Pacakge name(s) supplied by overlay, and appended to
         config_locationProviderPackageNames. -->
    <string-array name="config_overlay_locationProviderPackageNames" translatable="false" />

    <!-- Boolean indicating if current platform supports bluetooth SCO for off call
    use cases -->
    <bool name="config_bluetooth_sco_off_call">true</bool>

    <!-- Boolean indicating if current platform supports bluetooth wide band
         speech -->
    <bool name="config_bluetooth_wide_band_speech">true</bool>

    <!-- Boolean indicating if current platform supports quick switch-on/off of
         Bluetooth Module -->
    <bool name="config_bluetooth_adapter_quick_switch">true</bool>

    <!-- The default data-use polling period. -->
    <integer name="config_datause_polling_period_sec">600</integer>

    <!-- The default data-use threshold in bytes. 0 disables-->
    <integer name="config_datause_threshold_bytes">0</integer>

    <!-- The default reduced-datarate value in kilobits per sec -->
    <integer name="config_datause_throttle_kbitsps">300</integer>

    <!-- The default iface on which to monitor data use -->
    <string name="config_datause_iface" translatable="false">rmnet0</string>

    <!-- The default reduced-datarate notification mask -->
    <!-- 2 means give warning -->
    <integer name="config_datause_notification_type">2</integer>

    <!-- Flag indicating whether the current device is "voice capable".
         If true, this means that the device supports circuit-switched
         (i.e. voice) phone calls over the telephony network, and is
         allowed to display the in-call UI while a cellular voice call is
         active.  This can be overridden to false for "data only" devices
         which can't make voice calls and don't support any in-call UI.

         Note: this flag is subtly different from the
         PackageManager.FEATURE_TELEPHONY system feature, which is
         available on *any* device with a telephony radio, even if the
         device is data-only. -->
    <bool name="config_voice_capable">true</bool>

    <!-- Flag indicating whether the current device allows sms service.
         If true, this means that the device supports both sending and
         receiving sms via the telephony network.
         This can be overridden to false for "data only" devices
         which can't send and receive sms message.

         Note: Disable SMS also disable voicemail waiting sms,
               cell broadcasting sms, and MMS. -->
    <bool name="config_sms_capable">true</bool>

    <!-- Enable/disable default bluetooth profiles:
        HSP_AG, ObexObjectPush, Audio, NAP -->
    <bool name="config_bluetooth_default_profiles">true</bool>

    <!-- IP address of the dns server to use if nobody else suggests one -->
    <string name="config_default_dns_server" translatable="false">8.8.8.8</string>

    <!-- The default character set for GsmAlphabet -->
    <!-- Empty string means MBCS is not considered -->
    <string name="gsm_alphabet_default_charset" translatable="false"></string>

    <!-- Enables SIP on WIFI only -->
    <bool name="config_sip_wifi_only">false</bool>

    <!-- Enables built-in SIP phone capability -->
    <bool name="config_built_in_sip_phone">true</bool>

    <!-- Boolean indicating if restoring network selection should be skipped -->
    <!-- The restoring is handled by modem if it is true-->
    <bool translatable="false" name="skip_restoring_network_selection">false</bool>

    <!-- Maximum number of database connections opened and managed by framework layer
         to handle queries on each database when using Write-Ahead Logging. -->
    <integer name="db_connection_pool_size">4</integer>

    <!-- The default journal mode to use use when Write-Ahead Logging is not active.
         Choices are: OFF, DELETE, TRUNCATE, PERSIST and MEMORY.
         PERSIST may improve performance by reducing how often journal blocks are
         reallocated (compared to truncation) resulting in better data block locality
         and less churn of the storage media. -->
    <string name="db_default_journal_mode">PERSIST</string>

    <!-- Maximum size of the persistent journal file in bytes.
         If the journal file grows to be larger than this amount then SQLite will
         truncate it after committing the transaction. -->
    <integer name="db_journal_size_limit">524288</integer>

    <!-- The database synchronization mode when using the default journal mode.
         FULL is safest and preserves durability at the cost of extra fsyncs.
         NORMAL also preserves durability in non-WAL modes and uses checksums to ensure
         integrity although there is a small chance that an error might go unnoticed.
         Choices are: FULL, NORMAL, OFF. -->
    <string name="db_default_sync_mode">FULL</string>

    <!-- The database synchronization mode when using Write-Ahead Logging.
         FULL is safest and preserves durability at the cost of extra fsyncs.
         NORMAL sacrifices durability in WAL mode because syncs are only performed before
         and after checkpoint operations.  If checkpoints are infrequent and power loss
         occurs, then committed transactions could be lost and applications might break.
         Choices are: FULL, NORMAL, OFF. -->
    <string name="db_wal_sync_mode">FULL</string>

    <!-- The Write-Ahead Log auto-checkpoint interval in database pages (typically 1 to 4KB).
         The log is checkpointed automatically whenever it exceeds this many pages.
         When a database is reopened, its journal mode is set back to the default
         journal mode, which may cause a checkpoint operation to occur.  Checkpoints
         can also happen at other times when transactions are committed.
         The bigger the WAL file, the longer a checkpoint operation takes, so we try
         to keep the WAL file relatively small to avoid long delays.
         The size of the WAL file is also constrained by 'db_journal_size_limit'. -->
    <integer name="db_wal_autocheckpoint">100</integer>

    <!-- Max space (in MB) allocated to DownloadManager to store the downloaded
         files if they are to be stored in DownloadManager's data dir,
         which typically is /data/data/com.android.providers.downloads/files -->
    <integer name="config_downloadDataDirSize">100</integer>

    <!-- Max number of downloads allowed to proceed concurrently -->
    <integer name="config_MaxConcurrentDownloadsAllowed">5</integer>

    <!-- When the free space available in DownloadManager's data dir falls
         below the percentage value specified by this param, DownloadManager
         starts removing files to try to make percentage of available
         free space above this threshold value. -->
    <integer name="config_downloadDataDirLowSpaceThreshold">10</integer>

    <!-- The URL that should be sent in an x-wap-profile header with an HTTP request,
         as defined in the Open Mobile Alliance User Agent Profile specification
         OMA-TS-UAProf-V2_0-20060206-A Section 8.1.1.1. If the URL contains a '%s'
         format string then that substring will be replaced with the value of
         Build.MODEL. The format string shall not be escaped. -->
    <string name="config_useragentprofile_url" translatable="false"></string>

    <!-- When a database query is executed, the results retuned are paginated
         in pages of size (in KB) indicated by this value -->
    <integer name="config_cursorWindowSize">2048</integer>

    <!-- Sets whether menu shortcuts should be displayed on panel menus when
         a keyboard is present. -->
    <bool name="config_showMenuShortcutsWhenKeyboardPresent">false</bool>

    <!-- Do not translate. Defines the slots is Two Digit Number for dialing normally not USSD -->
    <string-array name="config_twoDigitNumberPattern" translatable="false">
    </string-array>

    <!-- The VoiceMail default value is displayed to my own number if it is true -->
    <bool name="config_telephony_use_own_number_for_voicemail">false</bool>

    <!-- If this value is true, Sms encoded as octet is decoded by utf8 decoder.
         If false, decoded by Latin decoder. -->
    <bool name="config_sms_utf8_support">false</bool>

    <!-- If this value is true, The mms content-disposition field is supported correctly.
         If false, Content-disposition fragments are ignored -->
    <bool name="config_mms_content_disposition_support">true</bool>

    <!-- National Language Identifier codes for the following two config items.
         (from 3GPP TS 23.038 V9.1.1 Table 6.2.1.2.4.1):
          0  - reserved
          1  - Turkish
          2  - Spanish (single shift table only)
          3  - Portuguese
          4  - Bengali
          5  - Gujarati
          6  - Hindi
          7  - Kannada
          8  - Malayalam
          9  - Oriya
         10  - Punjabi
         11  - Tamil
         12  - Telugu
         13  - Urdu
         14+ - reserved -->

    <!-- National language single shift tables to enable for SMS encoding.
         Decoding is always enabled. 3GPP TS 23.038 states that this feature
         should not be enabled until a formal request is issued by the relevant
         national regulatory body. Array elements are codes from the table above.
         Example 1: devices sold in Turkey must include table 1 to conform with
           By-Law Number 27230. (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf)
         Example 2: devices sold in India should include tables 4 through 13
           to enable use of the new Release 9 tables for Indic languages. -->
    <integer-array name="config_sms_enabled_single_shift_tables"></integer-array>

    <!-- National language locking shift tables to enable for SMS encoding.
         Decoding is always enabled. 3GPP TS 23.038 states that this feature
         should not be enabled until a formal request is issued by the relevant
         national regulatory body. Array elements are codes from the table above.
         Example 1: devices sold in Turkey must include table 1 after the
           Turkish Telecommunication Authority requires locking shift encoding
           to be enabled (est. July 2012). (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf)
           See also: http://www.mobitech.com.tr/tr/ersanozturkblog_en/index.php?entry=entry090223-160014
         Example 2: devices sold in India should include tables 4 through 13
         to enable use of the new Release 9 tables for Indic languages. -->
    <integer-array name="config_sms_enabled_locking_shift_tables"></integer-array>

    <!-- Set to true if the RSSI should always display CDMA signal strength even on EVDO -->
    <bool name="config_alwaysUseCdmaRssi">false</bool>


    <!-- If this value is true, duplicate Source/Destination port fields
         in WDP header of some carriers OMADM wap push are supported.
         ex: MSGTYPE-TotalSegments-CurrentSegment
             -SourcePortDestPort-SourcePortDestPort-OMADM PDU
         If false, not supported. -->
    <bool name="config_duplicate_port_omadm_wappush">false</bool>

    <!-- Maximum numerical value that will be shown in a status bar
         notification icon or in the notification itself. Will be replaced
         with @string/status_bar_notification_info_overflow when shown in the
         UI. -->
    <integer name="status_bar_notification_info_maxnum">999</integer>

    <!-- Path to an ISO image to be shared with via USB mass storage.
         This is intended to allow packaging drivers or tools for installation on a PC. -->
    <string translatable="false" name="config_isoImagePath"></string>

    <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
         autodetected from the Configuration. -->
    <bool name="config_showNavigationBar">false</bool>

    <!-- Whether action menu items should be displayed in ALLCAPS or not.
         Defaults to true. If this is not appropriate for specific locales
         it should be disabled in that locale's resources. -->
    <bool name="config_actionMenuItemAllCaps">true</bool>

    <!-- Whether action menu items should obey the "withText" showAsAction
         flag. This may be set to false for situations where space is
         extremely limited. -->
    <bool name="config_allowActionMenuItemTextWithIcon">false</bool>

    <!-- Remote server that can provide NTP responses. -->
    <string translatable="false" name="config_ntpServer">2.android.pool.ntp.org</string>
    <!-- Timeout to wait for NTP server response. -->
    <integer name="config_ntpTimeout">20000</integer>

    <!-- Default network policy warning threshold, in megabytes. -->
    <integer name="config_networkPolicyDefaultWarning">2048</integer>

    <!-- Set and Unsets WiMAX -->
    <bool name="config_wimaxEnabled">false</bool>
    <!-- Location of the wimax framwork jar location -->
    <string name="config_wimaxServiceJarLocation" translatable="false"></string>
    <!-- Location of the wimax native library locaiton -->
    <string name="config_wimaxNativeLibLocation" translatable="false"></string>
    <!-- Name of the wimax manager class -->
    <string name="config_wimaxManagerClassname" translatable="false"></string>
    <!-- Name of the wimax service class -->
    <string name="config_wimaxServiceClassname" translatable="false"></string>
    <!-- Name of the wimax state tracker clas -->
    <string name="config_wimaxStateTrackerClassname" translatable="false"></string>

    <!-- enable screen saver feature -->
    <bool name="config_enableDreams">true</bool>

    <!-- Base "touch slop" value used by ViewConfiguration as a
         movement threshold where scrolling should begin. -->
    <dimen name="config_viewConfigurationTouchSlop">8dp</dimen>

    <!-- Maximum number of grid columns permitted in the ResolverActivity
         used for picking activities to handle an intent. -->
    <integer name="config_maxResolverActivityColumns">2</integer>

    <!-- Array of OEM specific USB mode override config.
         OEM can override a certain USB mode depending on ro.bootmode.
         Specify an array of below items to set override rule.
         [bootmode]:[original USB mode]:[USB mode used]-->
    <integer-array translatable="false" name="config_oemUsbModeOverride">
    </integer-array>

    <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. -->
    <bool name="config_cellBroadcastAppLinks">false</bool>

    <!-- The default value if the SyncStorageEngine should sync automatically or not -->
    <bool name="config_syncstorageengine_masterSyncAutomatically">true</bool>

    <!--  Maximum number of supported users -->
    <integer name="config_multiuserMaximumUsers">10</integer>
</resources>