1 .\" Copyright (C) 1995 Andries Brouwer (aeb@cwi.nl)
3 .\" %%%LICENSE_START(VERBATIM)
4 .\" Permission is granted to make and distribute verbatim copies of this
5 .\" manual provided the copyright notice and this permission notice are
6 .\" preserved on all copies.
8 .\" Permission is granted to copy and distribute modified versions of this
9 .\" manual under the conditions for verbatim copying, provided that the
10 .\" entire resulting derived work is distributed under the terms of a
11 .\" permission notice identical to this one.
13 .\" Since the Linux kernel and libraries are constantly changing, this
14 .\" manual page may be incorrect or out-of-date. The author(s) assume no
15 .\" responsibility for errors or omissions, or for damages resulting from
16 .\" the use of the information contained herein. The author(s) may not
17 .\" have taken the same level of care in the production of this manual,
18 .\" which is licensed free of charge, as they might when working
21 .\" Formatted or processed versions of this manual, if unaccompanied by
22 .\" the source, must acknowledge the copyright and authors of this work.
25 .\" Written 11 June 1995 by Andries Brouwer <aeb@cwi.nl>
26 .\" Modified 22 July 1995 by Michael Chastain <mec@duracef.shout.net>:
27 .\" Derived from 'readdir.2'.
28 .\" Modified Tue Oct 22 08:11:14 EDT 1996 by Eric S. Raymond <esr@thyrsus.com>
30 .\"*******************************************************************
32 .\" This file was generated with po4a. Translate the source file.
34 .\"*******************************************************************
35 .TH GETDENTS 2 2012\-08\-03 Linux "Linux Programmer's Manual"
37 getdents \- ディレクトリ・エントリを取得する
40 \fBint getdents(unsigned int \fP\fIfd\fP\fB, struct linux_dirent *\fP\fIdirp\fP\fB,\fP
41 \fB unsigned int \fP\fIcount\fP\fB);\fP
44 \fI注\fP: このシステムコールに対する glibc のラッパー関数は用意されていない。「注意」の節を参照のこと。
46 これはあなたの関心を引くような関数ではない。 POSIX 準拠の C ライブラリインターフェースについては \fBreaddir\fP(3) を見ること。
47 このページは、カーネルシステムコールの生のインターフェースについて 記載したものである。
49 \fBgetdents\fP() システムコールは、オープン済みのファイルディスクリプタ \fIfd\fP で参照されるディレクトリから
50 \fIlinux_dirent\fP 構造体をいくつか読み出し、 \fIdirp\fP が指しているバッファに格納する。 \fIcount\fP
53 \fIlinux_dirent\fP 構造体は以下のように宣言されている:
58 unsigned long d_ino; /* Inode number */
59 unsigned long d_off; /* Offset to next \fIlinux_dirent\fP */
60 unsigned short d_reclen; /* Length of this \fIlinux_dirent\fP */
61 char d_name[]; /* Filename (null\-terminated) */
62 /* length is actually (d_reclen \- 2 \-
63 offsetof(struct linux_dirent, d_name) */
65 char pad; // Zero padding byte
66 char d_type; // File type (only since Linux 2.6.4;
67 // offset is (d_reclen \- 1))
74 \fId_ino\fP は inode 番号である。 \fId_off\fP はディレクトリの先頭から次の \fIlinux_dirent\fP の先頭までの距離である。
75 \fId_reclen\fP はこの \fIlinux_dirent\fP 全体のサイズである。 \fId_name\fP
76 はヌル(null)文字で終わるファイル名である。
78 \fId_type\fP は、構造体の最後のバイトであり、ファイルタイプを示す。 \fId_type\fP は以下の値の一つを取る
79 (\fI<dirent.h>\fP で定義されている)。
105 \fId_type\fP フィールドは Linux 2.6.4 から実装されている。 これは \fIlinux_dirent\fP
106 構造体のうち、以前はゼロで埋められていた空間に配置されている。 従って、2.6.3 以前のカーネルでは、このフィールドにアクセスしようとすると 常に値
107 0 (\fBDT_UNKNOWN\fP) が返される。
110 .\" The same sentence is in readdir.2
111 現在のところ、 \fId_type\fP でファイルタイプを返す機能が完全にサポートされているのは、 いくつかのファイルシステムにおいてのみである
112 (Btrfs, ext2, ext3, ext4 はサポートしている)。 どのアプリケーションも、 \fBDT_UNKNOWN\fP
113 が返された際に適切に処理できなければならない。
115 成功した場合は、読み込んだバイト数が返される。 ディレクトリの終わりならば 0 が返される。 エラーの場合は \-1 を返され、 \fIerrno\fP
120 ファイルディスクリプタ \fIfd\fP が不正である。
123 引き数が呼び出したプロセスのアドレス空間外を指している。
132 ファイルディスクリプタがディレクトリを参照していない。
134 .\" SVr4 documents additional ENOLINK, EIO error conditions.
137 glibc はこのシステムコールに対するラッパー関数を提供していないので、 \fBsyscall\fP(2) を使って呼び出すこと。
138 \fIlinux_dirent\fP 構造体は自分で定義する必要がある。しかし、たいていはこのシステムコールではなく \fBreaddir\fP(3)
141 このシステムコールは \fBreaddir\fP(2) を置き換えるものである。
143 元々の Linux の \fBgetdents\fP() システムコールは、大きなファイルシステムと
144 大きなファイルオフセットを扱うことができなかった。
145 その結果、Linux 2.4 で \fBgetdents64\fP() が追加された。
146 \fBgetdents64\fP() では、\fIlinux_dirent\fP 構造体のフィールド \fId_ino\fP と
147 \fId_off\fP でビット幅の大きなデータ型が使われている。
149 .\" FIXME: This program uses the older getdents(0 system call
150 .\" and the structure with smaller field widths.
151 下記のプログラムは \fBgetdents\fP() の使用例を示したものである。 以下は、このプログラムを ext2 ディレクトリで実行した際に得られる
156 $\fB ./a.out /testfs/\fP
157 \-\-\-\-\-\-\-\-\-\-\-\-\-\-\- nread=120 \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
158 i\-node# file type d_reclen d_off d_name
161 11 directory 24 44 lost+found
163 228929 directory 16 68 sub
164 16353 directory 16 80 sub2
165 130817 directory 16 4096 sub3
172 #include <dirent.h> /* Defines DT_* constants */
177 #include <sys/stat.h>
178 #include <sys/syscall.h>
180 #define handle_error(msg) \e
181 do { perror(msg); exit(EXIT_FAILURE); } while (0)
183 struct linux_dirent {
186 unsigned short d_reclen;
190 #define BUF_SIZE 1024
193 main(int argc, char *argv[])
197 struct linux_dirent *d;
201 fd = open(argc > 1 ? argv[1] : ".", O_RDONLY | O_DIRECTORY);
203 handle_error("open");
206 nread = syscall(SYS_getdents, fd, buf, BUF_SIZE);
208 handle_error("getdents");
213 printf("\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- nread=%d \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\en", nread);
214 printf("i\-node# file type d_reclen d_off d_name\en");
215 for (bpos = 0; bpos < nread;) {
216 d = (struct linux_dirent *) (buf + bpos);
217 printf("%8ld ", d\->d_ino);
218 d_type = *(buf + bpos + d\->d_reclen \- 1);
219 printf("%\-10s ", (d_type == DT_REG) ? "regular" :
220 (d_type == DT_DIR) ? "directory" :
221 (d_type == DT_FIFO) ? "FIFO" :
222 (d_type == DT_SOCK) ? "socket" :
223 (d_type == DT_LNK) ? "symlink" :
224 (d_type == DT_BLK) ? "block dev" :
225 (d_type == DT_CHR) ? "char dev" : "???");
226 printf("%4d %10lld %s\en", d\->d_reclen,
227 (long long) d\->d_off, d\->d_name);
228 bpos += d\->d_reclen;
236 \fBreaddir\fP(2), \fBreaddir\fP(3)
238 この man ページは Linux \fIman\-pages\fP プロジェクトのリリース 3.50 の一部
239 である。プロジェクトの説明とバグ報告に関する情報は
240 http://www.kernel.org/doc/man\-pages/ に書かれている。