drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h

   1 /* SPDX-License-Identifier: MIT */
   2 /*
   3  * Copyright © 2014-2019 Intel Corporation
   4  */
   5
   6 #ifndef _INTEL_GUC_FWIF_H
   7 #define _INTEL_GUC_FWIF_H
   8
   9 #include <linux/bits.h>
  10 #include <linux/compiler.h>
  11 #include <linux/types.h>
  12
  13 #define GUC_CLIENT_PRIORITY_KMD_HIGH    0
  14 #define GUC_CLIENT_PRIORITY_HIGH        1
  15 #define GUC_CLIENT_PRIORITY_KMD_NORMAL  2
  16 #define GUC_CLIENT_PRIORITY_NORMAL      3
  17 #define GUC_CLIENT_PRIORITY_NUM         4
  18
  19 #define GUC_MAX_STAGE_DESCRIPTORS       1024
  20 #define GUC_INVALID_STAGE_ID            GUC_MAX_STAGE_DESCRIPTORS
  21
  22 #define GUC_RENDER_ENGINE               0
  23 #define GUC_VIDEO_ENGINE                1
  24 #define GUC_BLITTER_ENGINE              2
  25 #define GUC_VIDEOENHANCE_ENGINE         3
  26 #define GUC_VIDEO_ENGINE2               4
  27 #define GUC_MAX_ENGINES_NUM             (GUC_VIDEO_ENGINE2 + 1)
  28
  29 #define GUC_MAX_ENGINE_CLASSES          5
  30 #define GUC_MAX_INSTANCES_PER_CLASS     16
  31
  32 #define GUC_DOORBELL_INVALID            256
  33
  34 #define GUC_WQ_SIZE                     (PAGE_SIZE * 2)
  35
  36 /* Work queue item header definitions */
  37 #define WQ_STATUS_ACTIVE                1
  38 #define WQ_STATUS_SUSPENDED             2
  39 #define WQ_STATUS_CMD_ERROR             3
  40 #define WQ_STATUS_ENGINE_ID_NOT_USED    4
  41 #define WQ_STATUS_SUSPENDED_FROM_RESET  5
  42 #define WQ_TYPE_SHIFT                   0
  43 #define   WQ_TYPE_BATCH_BUF             (0x1 << WQ_TYPE_SHIFT)
  44 #define   WQ_TYPE_PSEUDO                (0x2 << WQ_TYPE_SHIFT)
  45 #define   WQ_TYPE_INORDER               (0x3 << WQ_TYPE_SHIFT)
  46 #define   WQ_TYPE_NOOP                  (0x4 << WQ_TYPE_SHIFT)
  47 #define WQ_TARGET_SHIFT                 10
  48 #define WQ_LEN_SHIFT                    16
  49 #define WQ_NO_WCFLUSH_WAIT              (1 << 27)
  50 #define WQ_PRESENT_WORKLOAD             (1 << 28)
  51
  52 #define WQ_RING_TAIL_SHIFT              20
  53 #define WQ_RING_TAIL_MAX                0x7FF   /* 2^11 QWords */
  54 #define WQ_RING_TAIL_MASK               (WQ_RING_TAIL_MAX << WQ_RING_TAIL_SHIFT)
  55
  56 #define GUC_STAGE_DESC_ATTR_ACTIVE      BIT(0)
  57 #define GUC_STAGE_DESC_ATTR_PENDING_DB  BIT(1)
  58 #define GUC_STAGE_DESC_ATTR_KERNEL      BIT(2)
  59 #define GUC_STAGE_DESC_ATTR_PREEMPT     BIT(3)
  60 #define GUC_STAGE_DESC_ATTR_RESET       BIT(4)
  61 #define GUC_STAGE_DESC_ATTR_WQLOCKED    BIT(5)
  62 #define GUC_STAGE_DESC_ATTR_PCH         BIT(6)
  63 #define GUC_STAGE_DESC_ATTR_TERMINATED  BIT(7)
  64
  65 /* New GuC control data */
  66 #define GUC_CTL_CTXINFO                 0
  67 #define   GUC_CTL_CTXNUM_IN16_SHIFT     0
  68 #define   GUC_CTL_BASE_ADDR_SHIFT       12
  69
  70 #define GUC_CTL_LOG_PARAMS              1
  71 #define   GUC_LOG_VALID                 (1 << 0)
  72 #define   GUC_LOG_NOTIFY_ON_HALF_FULL   (1 << 1)
  73 #define   GUC_LOG_ALLOC_IN_MEGABYTE     (1 << 3)
  74 #define   GUC_LOG_CRASH_SHIFT           4
  75 #define   GUC_LOG_CRASH_MASK            (0x3 << GUC_LOG_CRASH_SHIFT)
  76 #define   GUC_LOG_DPC_SHIFT             6
  77 #define   GUC_LOG_DPC_MASK              (0x7 << GUC_LOG_DPC_SHIFT)
  78 #define   GUC_LOG_ISR_SHIFT             9
  79 #define   GUC_LOG_ISR_MASK              (0x7 << GUC_LOG_ISR_SHIFT)
  80 #define   GUC_LOG_BUF_ADDR_SHIFT        12
  81
  82 #define GUC_CTL_WA                      2
  83 #define GUC_CTL_FEATURE                 3
  84 #define   GUC_CTL_DISABLE_SCHEDULER     (1 << 14)
  85
  86 #define GUC_CTL_DEBUG                   4
  87 #define   GUC_LOG_VERBOSITY_SHIFT       0
  88 #define   GUC_LOG_VERBOSITY_LOW         (0 << GUC_LOG_VERBOSITY_SHIFT)
  89 #define   GUC_LOG_VERBOSITY_MED         (1 << GUC_LOG_VERBOSITY_SHIFT)
  90 #define   GUC_LOG_VERBOSITY_HIGH        (2 << GUC_LOG_VERBOSITY_SHIFT)
  91 #define   GUC_LOG_VERBOSITY_ULTRA       (3 << GUC_LOG_VERBOSITY_SHIFT)
  92 /* Verbosity range-check limits, without the shift */
  93 #define   GUC_LOG_VERBOSITY_MIN         0
  94 #define   GUC_LOG_VERBOSITY_MAX         3
  95 #define   GUC_LOG_VERBOSITY_MASK        0x0000000f
  96 #define   GUC_LOG_DESTINATION_MASK      (3 << 4)
  97 #define   GUC_LOG_DISABLED              (1 << 6)
  98 #define   GUC_PROFILE_ENABLED           (1 << 7)
  99
 100 #define GUC_CTL_ADS                     5
 101 #define   GUC_ADS_ADDR_SHIFT            1
 102 #define   GUC_ADS_ADDR_MASK             (0xFFFFF << GUC_ADS_ADDR_SHIFT)
 103
 104 #define GUC_CTL_MAX_DWORDS              (SOFT_SCRATCH_COUNT - 2) /* [1..14] */
 105
 106 /* Work item for submitting workloads into work queue of GuC. */
 107 struct guc_wq_item {
 108         u32 header;
 109         u32 context_desc;
 110         u32 submit_element_info;
 111         u32 fence_id;
 112 } __packed;
 113
 114 struct guc_process_desc {
 115         u32 stage_id;
 116         u64 db_base_addr;
 117         u32 head;
 118         u32 tail;
 119         u32 error_offset;
 120         u64 wq_base_addr;
 121         u32 wq_size_bytes;
 122         u32 wq_status;
 123         u32 engine_presence;
 124         u32 priority;
 125         u32 reserved[30];
 126 } __packed;
 127
 128 /* engine id and context id is packed into guc_execlist_context.context_id*/
 129 #define GUC_ELC_CTXID_OFFSET            0
 130 #define GUC_ELC_ENGINE_OFFSET           29
 131
 132 /* The execlist context including software and HW information */
 133 struct guc_execlist_context {
 134         u32 context_desc;
 135         u32 context_id;
 136         u32 ring_status;
 137         u32 ring_lrca;
 138         u32 ring_begin;
 139         u32 ring_end;
 140         u32 ring_next_free_location;
 141         u32 ring_current_tail_pointer_value;
 142         u8 engine_state_submit_value;
 143         u8 engine_state_wait_value;
 144         u16 pagefault_count;
 145         u16 engine_submit_queue_count;
 146 } __packed;
 147
 148 /*
 149  * This structure describes a stage set arranged for a particular communication
 150  * between uKernel (GuC) and Driver (KMD). Technically, this is known as a
 151  * "GuC Context descriptor" in the specs, but we use the term "stage descriptor"
 152  * to avoid confusion with all the other things already named "context" in the
 153  * driver. A static pool of these descriptors are stored inside a GEM object
 154  * (stage_desc_pool) which is held for the entire lifetime of our interaction
 155  * with the GuC, being allocated before the GuC is loaded with its firmware.
 156  */
 157 struct guc_stage_desc {
 158         u32 sched_common_area;
 159         u32 stage_id;
 160         u32 pas_id;
 161         u8 engines_used;
 162         u64 db_trigger_cpu;
 163         u32 db_trigger_uk;
 164         u64 db_trigger_phy;
 165         u16 db_id;
 166
 167         struct guc_execlist_context lrc[GUC_MAX_ENGINES_NUM];
 168
 169         u8 attribute;
 170
 171         u32 priority;
 172
 173         u32 wq_sampled_tail_offset;
 174         u32 wq_total_submit_enqueues;
 175
 176         u32 process_desc;
 177         u32 wq_addr;
 178         u32 wq_size;
 179
 180         u32 engine_presence;
 181
 182         u8 engine_suspended;
 183
 184         u8 reserved0[3];
 185         u64 reserved1[1];
 186
 187         u64 desc_private;
 188 } __packed;
 189
 190 /**
 191  * DOC: CTB based communication
 192  *
 193  * The CTB (command transport buffer) communication between Host and GuC
 194  * is based on u32 data stream written to the shared buffer. One buffer can
 195  * be used to transmit data only in one direction (one-directional channel).
 196  *
 197  * Current status of the each buffer is stored in the buffer descriptor.
 198  * Buffer descriptor holds tail and head fields that represents active data
 199  * stream. The tail field is updated by the data producer (sender), and head
 200  * field is updated by the data consumer (receiver)::
 201  *
 202  *      +------------+
 203  *      | DESCRIPTOR |          +=================+============+========+
 204  *      +============+          |                 | MESSAGE(s) |        |
 205  *      | address    |--------->+=================+============+========+
 206  *      +------------+
 207  *      | head       |          ^-----head--------^
 208  *      +------------+
 209  *      | tail       |          ^---------tail-----------------^
 210  *      +------------+
 211  *      | size       |          ^---------------size--------------------^
 212  *      +------------+
 213  *
 214  * Each message in data stream starts with the single u32 treated as a header,
 215  * followed by optional set of u32 data that makes message specific payload::
 216  *
 217  *      +------------+---------+---------+---------+
 218  *      |         MESSAGE                          |
 219  *      +------------+---------+---------+---------+
 220  *      |   msg[0]   |   [1]   |   ...   |  [n-1]  |
 221  *      +------------+---------+---------+---------+
 222  *      |   MESSAGE  |       MESSAGE PAYLOAD       |
 223  *      +   HEADER   +---------+---------+---------+
 224  *      |            |    0    |   ...   |    n    |
 225  *      +======+=====+=========+=========+=========+
 226  *      | 31:16| code|         |         |         |
 227  *      +------+-----+         |         |         |
 228  *      |  15:5|flags|         |         |         |
 229  *      +------+-----+         |         |         |
 230  *      |   4:0|  len|         |         |         |
 231  *      +------+-----+---------+---------+---------+
 232  *
 233  *                   ^-------------len-------------^
 234  *
 235  * The message header consists of:
 236  *
 237  * - **len**, indicates length of the message payload (in u32)
 238  * - **code**, indicates message code
 239  * - **flags**, holds various bits to control message handling
 240  */
 241
 242 /*
 243  * Describes single command transport buffer.
 244  * Used by both guc-master and clients.
 245  */
 246 struct guc_ct_buffer_desc {
 247         u32 addr;               /* gfx address */
 248         u64 host_private;       /* host private data */
 249         u32 size;               /* size in bytes */
 250         u32 head;               /* offset updated by GuC*/
 251         u32 tail;               /* offset updated by owner */
 252         u32 is_in_error;        /* error indicator */
 253         u32 fence;              /* fence updated by GuC */
 254         u32 status;             /* status updated by GuC */
 255         u32 owner;              /* id of the channel owner */
 256         u32 owner_sub_id;       /* owner-defined field for extra tracking */
 257         u32 reserved[5];
 258 } __packed;
 259
 260 /* Type of command transport buffer */
 261 #define INTEL_GUC_CT_BUFFER_TYPE_SEND   0x0u
 262 #define INTEL_GUC_CT_BUFFER_TYPE_RECV   0x1u
 263
 264 /*
 265  * Definition of the command transport message header (DW0)
 266  *
 267  * bit[4..0]    message len (in dwords)
 268  * bit[7..5]    reserved
 269  * bit[8]       response (G2H only)
 270  * bit[8]       write fence to desc (H2G only)
 271  * bit[9]       write status to H2G buff (H2G only)
 272  * bit[10]      send status back via G2H (H2G only)
 273  * bit[15..11]  reserved
 274  * bit[31..16]  action code
 275  */
 276 #define GUC_CT_MSG_LEN_SHIFT                    0
 277 #define GUC_CT_MSG_LEN_MASK                     0x1F
 278 #define GUC_CT_MSG_IS_RESPONSE                  (1 << 8)
 279 #define GUC_CT_MSG_WRITE_FENCE_TO_DESC          (1 << 8)
 280 #define GUC_CT_MSG_WRITE_STATUS_TO_BUFF         (1 << 9)
 281 #define GUC_CT_MSG_SEND_STATUS                  (1 << 10)
 282 #define GUC_CT_MSG_ACTION_SHIFT                 16
 283 #define GUC_CT_MSG_ACTION_MASK                  0xFFFF
 284
 285 #define GUC_FORCEWAKE_RENDER    (1 << 0)
 286 #define GUC_FORCEWAKE_MEDIA     (1 << 1)
 287
 288 #define GUC_POWER_UNSPECIFIED   0
 289 #define GUC_POWER_D0            1
 290 #define GUC_POWER_D1            2
 291 #define GUC_POWER_D2            3
 292 #define GUC_POWER_D3            4
 293
 294 /* Scheduling policy settings */
 295
 296 /* Reset engine upon preempt failure */
 297 #define POLICY_RESET_ENGINE             (1<<0)
 298 /* Preempt to idle on quantum expiry */
 299 #define POLICY_PREEMPT_TO_IDLE          (1<<1)
 300
 301 #define POLICY_MAX_NUM_WI 15
 302 #define POLICY_DEFAULT_DPC_PROMOTE_TIME_US 500000
 303 #define POLICY_DEFAULT_EXECUTION_QUANTUM_US 1000000
 304 #define POLICY_DEFAULT_PREEMPTION_TIME_US 500000
 305 #define POLICY_DEFAULT_FAULT_TIME_US 250000
 306
 307 struct guc_policy {
 308         /* Time for one workload to execute. (in micro seconds) */
 309         u32 execution_quantum;
 310         /* Time to wait for a preemption request to completed before issuing a
 311          * reset. (in micro seconds). */
 312         u32 preemption_time;
 313         /* How much time to allow to run after the first fault is observed.
 314          * Then preempt afterwards. (in micro seconds) */
 315         u32 fault_time;
 316         u32 policy_flags;
 317         u32 reserved[8];
 318 } __packed;
 319
 320 struct guc_policies {
 321         struct guc_policy policy[GUC_CLIENT_PRIORITY_NUM][GUC_MAX_ENGINE_CLASSES];
 322         u32 submission_queue_depth[GUC_MAX_ENGINE_CLASSES];
 323         /* In micro seconds. How much time to allow before DPC processing is
 324          * called back via interrupt (to prevent DPC queue drain starving).
 325          * Typically 1000s of micro seconds (example only, not granularity). */
 326         u32 dpc_promote_time;
 327
 328         /* Must be set to take these new values. */
 329         u32 is_valid;
 330
 331         /* Max number of WIs to process per call. A large value may keep CS
 332          * idle. */
 333         u32 max_num_work_items;
 334
 335         u32 reserved[4];
 336 } __packed;
 337
 338 /* GuC MMIO reg state struct */
 339
 340
 341 #define GUC_REGSET_MAX_REGISTERS        64
 342 #define GUC_S3_SAVE_SPACE_PAGES         10
 343
 344 struct guc_mmio_reg {
 345         u32 offset;
 346         u32 value;
 347         u32 flags;
 348 #define GUC_REGSET_MASKED               (1 << 0)
 349 } __packed;
 350
 351 struct guc_mmio_regset {
 352         struct guc_mmio_reg registers[GUC_REGSET_MAX_REGISTERS];
 353         u32 values_valid;
 354         u32 number_of_registers;
 355 } __packed;
 356
 357 /* GuC register sets */
 358 struct guc_mmio_reg_state {
 359         struct guc_mmio_regset engine_reg[GUC_MAX_ENGINE_CLASSES][GUC_MAX_INSTANCES_PER_CLASS];
 360         u32 reserved[98];
 361 } __packed;
 362
 363 /* HW info */
 364 struct guc_gt_system_info {
 365         u32 slice_enabled;
 366         u32 rcs_enabled;
 367         u32 reserved0;
 368         u32 bcs_enabled;
 369         u32 vdbox_enable_mask;
 370         u32 vdbox_sfc_support_mask;
 371         u32 vebox_enable_mask;
 372         u32 reserved[9];
 373 } __packed;
 374
 375 /* Clients info */
 376 struct guc_ct_pool_entry {
 377         struct guc_ct_buffer_desc desc;
 378         u32 reserved[7];
 379 } __packed;
 380
 381 #define GUC_CT_POOL_SIZE        2
 382
 383 struct guc_clients_info {
 384         u32 clients_num;
 385         u32 reserved0[13];
 386         u32 ct_pool_addr;
 387         u32 ct_pool_count;
 388         u32 reserved[4];
 389 } __packed;
 390
 391 /* GuC Additional Data Struct */
 392 struct guc_ads {
 393         u32 reg_state_addr;
 394         u32 reg_state_buffer;
 395         u32 scheduler_policies;
 396         u32 gt_system_info;
 397         u32 clients_info;
 398         u32 control_data;
 399         u32 golden_context_lrca[GUC_MAX_ENGINE_CLASSES];
 400         u32 eng_state_size[GUC_MAX_ENGINE_CLASSES];
 401         u32 reserved[16];
 402 } __packed;
 403
 404 /* GuC logging structures */
 405
 406 enum guc_log_buffer_type {
 407         GUC_ISR_LOG_BUFFER,
 408         GUC_DPC_LOG_BUFFER,
 409         GUC_CRASH_DUMP_LOG_BUFFER,
 410         GUC_MAX_LOG_BUFFER
 411 };
 412
 413 /**
 414  * struct guc_log_buffer_state - GuC log buffer state
 415  *
 416  * Below state structure is used for coordination of retrieval of GuC firmware
 417  * logs. Separate state is maintained for each log buffer type.
 418  * read_ptr points to the location where i915 read last in log buffer and
 419  * is read only for GuC firmware. write_ptr is incremented by GuC with number
 420  * of bytes written for each log entry and is read only for i915.
 421  * When any type of log buffer becomes half full, GuC sends a flush interrupt.
 422  * GuC firmware expects that while it is writing to 2nd half of the buffer,
 423  * first half would get consumed by Host and then get a flush completed
 424  * acknowledgment from Host, so that it does not end up doing any overwrite
 425  * causing loss of logs. So when buffer gets half filled & i915 has requested
 426  * for interrupt, GuC will set flush_to_file field, set the sampled_write_ptr
 427  * to the value of write_ptr and raise the interrupt.
 428  * On receiving the interrupt i915 should read the buffer, clear flush_to_file
 429  * field and also update read_ptr with the value of sample_write_ptr, before
 430  * sending an acknowledgment to GuC. marker & version fields are for internal
 431  * usage of GuC and opaque to i915. buffer_full_cnt field is incremented every
 432  * time GuC detects the log buffer overflow.
 433  */
 434 struct guc_log_buffer_state {
 435         u32 marker[2];
 436         u32 read_ptr;
 437         u32 write_ptr;
 438         u32 size;
 439         u32 sampled_write_ptr;
 440         union {
 441                 struct {
 442                         u32 flush_to_file:1;
 443                         u32 buffer_full_cnt:4;
 444                         u32 reserved:27;
 445                 };
 446                 u32 flags;
 447         };
 448         u32 version;
 449 } __packed;
 450
 451 struct guc_ctx_report {
 452         u32 report_return_status;
 453         u32 reserved1[64];
 454         u32 affected_count;
 455         u32 reserved2[2];
 456 } __packed;
 457
 458 /* GuC Shared Context Data Struct */
 459 struct guc_shared_ctx_data {
 460         u32 addr_of_last_preempted_data_low;
 461         u32 addr_of_last_preempted_data_high;
 462         u32 addr_of_last_preempted_data_high_tmp;
 463         u32 padding;
 464         u32 is_mapped_to_proxy;
 465         u32 proxy_ctx_id;
 466         u32 engine_reset_ctx_id;
 467         u32 media_reset_count;
 468         u32 reserved1[8];
 469         u32 uk_last_ctx_switch_reason;
 470         u32 was_reset;
 471         u32 lrca_gpu_addr;
 472         u64 execlist_ctx;
 473         u32 reserved2[66];
 474         struct guc_ctx_report preempt_ctx_report[GUC_MAX_ENGINES_NUM];
 475 } __packed;
 476
 477 /**
 478  * DOC: MMIO based communication
 479  *
 480  * The MMIO based communication between Host and GuC uses software scratch
 481  * registers, where first register holds data treated as message header,
 482  * and other registers are used to hold message payload.
 483  *
 484  * For Gen9+, GuC uses software scratch registers 0xC180-0xC1B8,
 485  * but no H2G command takes more than 8 parameters and the GuC FW
 486  * itself uses an 8-element array to store the H2G message.
 487  *
 488  *      +-----------+---------+---------+---------+
 489  *      |  MMIO[0]  | MMIO[1] |   ...   | MMIO[n] |
 490  *      +-----------+---------+---------+---------+
 491  *      | header    |      optional payload       |
 492  *      +======+====+=========+=========+=========+
 493  *      | 31:28|type|         |         |         |
 494  *      +------+----+         |         |         |
 495  *      | 27:16|data|         |         |         |
 496  *      +------+----+         |         |         |
 497  *      |  15:0|code|         |         |         |
 498  *      +------+----+---------+---------+---------+
 499  *
 500  * The message header consists of:
 501  *
 502  * - **type**, indicates message type
 503  * - **code**, indicates message code, is specific for **type**
 504  * - **data**, indicates message data, optional, depends on **code**
 505  *
 506  * The following message **types** are supported:
 507  *
 508  * - **REQUEST**, indicates Host-to-GuC request, requested GuC action code
 509  *   must be priovided in **code** field. Optional action specific parameters
 510  *   can be provided in remaining payload registers or **data** field.
 511  *
 512  * - **RESPONSE**, indicates GuC-to-Host response from earlier GuC request,
 513  *   action response status will be provided in **code** field. Optional
 514  *   response data can be returned in remaining payload registers or **data**
 515  *   field.
 516  */
 517
 518 #define GUC_MAX_MMIO_MSG_LEN            8
 519
 520 #define INTEL_GUC_MSG_TYPE_SHIFT        28
 521 #define INTEL_GUC_MSG_TYPE_MASK         (0xF << INTEL_GUC_MSG_TYPE_SHIFT)
 522 #define INTEL_GUC_MSG_DATA_SHIFT        16
 523 #define INTEL_GUC_MSG_DATA_MASK         (0xFFF << INTEL_GUC_MSG_DATA_SHIFT)
 524 #define INTEL_GUC_MSG_CODE_SHIFT        0
 525 #define INTEL_GUC_MSG_CODE_MASK         (0xFFFF << INTEL_GUC_MSG_CODE_SHIFT)
 526
 527 #define __INTEL_GUC_MSG_GET(T, m) \
 528         (((m) & INTEL_GUC_MSG_ ## T ## _MASK) >> INTEL_GUC_MSG_ ## T ## _SHIFT)
 529 #define INTEL_GUC_MSG_TO_TYPE(m)        __INTEL_GUC_MSG_GET(TYPE, m)
 530 #define INTEL_GUC_MSG_TO_DATA(m)        __INTEL_GUC_MSG_GET(DATA, m)
 531 #define INTEL_GUC_MSG_TO_CODE(m)        __INTEL_GUC_MSG_GET(CODE, m)
 532
 533 enum intel_guc_msg_type {
 534         INTEL_GUC_MSG_TYPE_REQUEST = 0x0,
 535         INTEL_GUC_MSG_TYPE_RESPONSE = 0xF,
 536 };
 537
 538 #define __INTEL_GUC_MSG_TYPE_IS(T, m) \
 539         (INTEL_GUC_MSG_TO_TYPE(m) == INTEL_GUC_MSG_TYPE_ ## T)
 540 #define INTEL_GUC_MSG_IS_REQUEST(m)     __INTEL_GUC_MSG_TYPE_IS(REQUEST, m)
 541 #define INTEL_GUC_MSG_IS_RESPONSE(m)    __INTEL_GUC_MSG_TYPE_IS(RESPONSE, m)
 542
 543 enum intel_guc_action {
 544         INTEL_GUC_ACTION_DEFAULT = 0x0,
 545         INTEL_GUC_ACTION_REQUEST_PREEMPTION = 0x2,
 546         INTEL_GUC_ACTION_REQUEST_ENGINE_RESET = 0x3,
 547         INTEL_GUC_ACTION_ALLOCATE_DOORBELL = 0x10,
 548         INTEL_GUC_ACTION_DEALLOCATE_DOORBELL = 0x20,
 549         INTEL_GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE = 0x30,
 550         INTEL_GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x40,
 551         INTEL_GUC_ACTION_FORCE_LOG_BUFFER_FLUSH = 0x302,
 552         INTEL_GUC_ACTION_ENTER_S_STATE = 0x501,
 553         INTEL_GUC_ACTION_EXIT_S_STATE = 0x502,
 554         INTEL_GUC_ACTION_SLPC_REQUEST = 0x3003,
 555         INTEL_GUC_ACTION_SAMPLE_FORCEWAKE = 0x3005,
 556         INTEL_GUC_ACTION_AUTHENTICATE_HUC = 0x4000,
 557         INTEL_GUC_ACTION_REGISTER_COMMAND_TRANSPORT_BUFFER = 0x4505,
 558         INTEL_GUC_ACTION_DEREGISTER_COMMAND_TRANSPORT_BUFFER = 0x4506,
 559         INTEL_GUC_ACTION_LIMIT
 560 };
 561
 562 enum intel_guc_preempt_options {
 563         INTEL_GUC_PREEMPT_OPTION_DROP_WORK_Q = 0x4,
 564         INTEL_GUC_PREEMPT_OPTION_DROP_SUBMIT_Q = 0x8,
 565 };
 566
 567 enum intel_guc_report_status {
 568         INTEL_GUC_REPORT_STATUS_UNKNOWN = 0x0,
 569         INTEL_GUC_REPORT_STATUS_ACKED = 0x1,
 570         INTEL_GUC_REPORT_STATUS_ERROR = 0x2,
 571         INTEL_GUC_REPORT_STATUS_COMPLETE = 0x4,
 572 };
 573
 574 enum intel_guc_sleep_state_status {
 575         INTEL_GUC_SLEEP_STATE_SUCCESS = 0x1,
 576         INTEL_GUC_SLEEP_STATE_PREEMPT_TO_IDLE_FAILED = 0x2,
 577         INTEL_GUC_SLEEP_STATE_ENGINE_RESET_FAILED = 0x3
 578 #define INTEL_GUC_SLEEP_STATE_INVALID_MASK 0x80000000
 579 };
 580
 581 #define GUC_LOG_CONTROL_LOGGING_ENABLED (1 << 0)
 582 #define GUC_LOG_CONTROL_VERBOSITY_SHIFT 4
 583 #define GUC_LOG_CONTROL_VERBOSITY_MASK  (0xF << GUC_LOG_CONTROL_VERBOSITY_SHIFT)
 584 #define GUC_LOG_CONTROL_DEFAULT_LOGGING (1 << 8)
 585
 586 enum intel_guc_response_status {
 587         INTEL_GUC_RESPONSE_STATUS_SUCCESS = 0x0,
 588         INTEL_GUC_RESPONSE_STATUS_GENERIC_FAIL = 0xF000,
 589 };
 590
 591 #define INTEL_GUC_MSG_IS_RESPONSE_SUCCESS(m) \
 592          (typecheck(u32, (m)) && \
 593           ((m) & (INTEL_GUC_MSG_TYPE_MASK | INTEL_GUC_MSG_CODE_MASK)) == \
 594           ((INTEL_GUC_MSG_TYPE_RESPONSE << INTEL_GUC_MSG_TYPE_SHIFT) | \
 595            (INTEL_GUC_RESPONSE_STATUS_SUCCESS << INTEL_GUC_MSG_CODE_SHIFT)))
 596
 597 /* This action will be programmed in C1BC - SOFT_SCRATCH_15_REG */
 598 enum intel_guc_recv_message {
 599         INTEL_GUC_RECV_MSG_CRASH_DUMP_POSTED = BIT(1),
 600         INTEL_GUC_RECV_MSG_FLUSH_LOG_BUFFER = BIT(3)
 601 };
 602
 603 #endif