perf/x86/uncore: Correct the number of CHAs on EMR

[tomoyo/tomoyo-test1.git] / drivers / i3c / master.c

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2018 Cadence Design Systems Inc.
 *
 * Author: Boris Brezillon <boris.brezillon@bootlin.com>
 */

#include <linux/atomic.h>
#include <linux/bug.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>

#include "internals.h"

static DEFINE_IDR(i3c_bus_idr);
static DEFINE_MUTEX(i3c_core_lock);
static int __i3c_first_dynamic_bus_num;

/**
 * i3c_bus_maintenance_lock - Lock the bus for a maintenance operation
 * @bus: I3C bus to take the lock on
 *
 * This function takes the bus lock so that no other operations can occur on
 * the bus. This is needed for all kind of bus maintenance operation, like
 * - enabling/disabling slave events
 * - re-triggering DAA
 * - changing the dynamic address of a device
 * - relinquishing mastership
 * - ...
 *
 * The reason for this kind of locking is that we don't want drivers and core
 * logic to rely on I3C device information that could be changed behind their
 * back.
 */
static void i3c_bus_maintenance_lock(struct i3c_bus *bus)
{
        down_write(&bus->lock);
}

/**
 * i3c_bus_maintenance_unlock - Release the bus lock after a maintenance
 *                            operation
 * @bus: I3C bus to release the lock on
 *
 * Should be called when the bus maintenance operation is done. See
 * i3c_bus_maintenance_lock() for more details on what these maintenance
 * operations are.
 */
static void i3c_bus_maintenance_unlock(struct i3c_bus *bus)
{
        up_write(&bus->lock);
}

/**
 * i3c_bus_normaluse_lock - Lock the bus for a normal operation
 * @bus: I3C bus to take the lock on
 *
 * This function takes the bus lock for any operation that is not a maintenance
 * operation (see i3c_bus_maintenance_lock() for a non-exhaustive list of
 * maintenance operations). Basically all communications with I3C devices are
 * normal operations (HDR, SDR transfers or CCC commands that do not change bus
 * state or I3C dynamic address).
 *
 * Note that this lock is not guaranteeing serialization of normal operations.
 * In other words, transfer requests passed to the I3C master can be submitted
 * in parallel and I3C master drivers have to use their own locking to make
 * sure two different communications are not inter-mixed, or access to the
 * output/input queue is not done while the engine is busy.
 */
void i3c_bus_normaluse_lock(struct i3c_bus *bus)
{
        down_read(&bus->lock);
}

/**
 * i3c_bus_normaluse_unlock - Release the bus lock after a normal operation
 * @bus: I3C bus to release the lock on
 *
 * Should be called when a normal operation is done. See
 * i3c_bus_normaluse_lock() for more details on what these normal operations
 * are.
 */
void i3c_bus_normaluse_unlock(struct i3c_bus *bus)
{
        up_read(&bus->lock);
}

static struct i3c_master_controller *
i3c_bus_to_i3c_master(struct i3c_bus *i3cbus)
{
        return container_of(i3cbus, struct i3c_master_controller, bus);
}

static struct i3c_master_controller *dev_to_i3cmaster(struct device *dev)
{
        return container_of(dev, struct i3c_master_controller, dev);
}

static const struct device_type i3c_device_type;

static struct i3c_bus *dev_to_i3cbus(struct device *dev)
{
        struct i3c_master_controller *master;

        if (dev->type == &i3c_device_type)
                return dev_to_i3cdev(dev)->bus;

        master = dev_to_i3cmaster(dev);

        return &master->bus;
}

static struct i3c_dev_desc *dev_to_i3cdesc(struct device *dev)
{
        struct i3c_master_controller *master;

        if (dev->type == &i3c_device_type)
                return dev_to_i3cdev(dev)->desc;

        master = dev_to_i3cmaster(dev);

        return master->this;
}

static ssize_t bcr_show(struct device *dev,
                        struct device_attribute *da,
                        char *buf)
{
        struct i3c_bus *bus = dev_to_i3cbus(dev);
        struct i3c_dev_desc *desc;
        ssize_t ret;

        i3c_bus_normaluse_lock(bus);
        desc = dev_to_i3cdesc(dev);
        ret = sprintf(buf, "%x\n", desc->info.bcr);
        i3c_bus_normaluse_unlock(bus);

        return ret;
}
static DEVICE_ATTR_RO(bcr);

static ssize_t dcr_show(struct device *dev,
                        struct device_attribute *da,
                        char *buf)
{
        struct i3c_bus *bus = dev_to_i3cbus(dev);
        struct i3c_dev_desc *desc;
        ssize_t ret;

        i3c_bus_normaluse_lock(bus);
        desc = dev_to_i3cdesc(dev);
        ret = sprintf(buf, "%x\n", desc->info.dcr);
        i3c_bus_normaluse_unlock(bus);

        return ret;
}
static DEVICE_ATTR_RO(dcr);

static ssize_t pid_show(struct device *dev,
                        struct device_attribute *da,
                        char *buf)
{
        struct i3c_bus *bus = dev_to_i3cbus(dev);
        struct i3c_dev_desc *desc;
        ssize_t ret;

        i3c_bus_normaluse_lock(bus);
        desc = dev_to_i3cdesc(dev);
        ret = sprintf(buf, "%llx\n", desc->info.pid);
        i3c_bus_normaluse_unlock(bus);

        return ret;
}
static DEVICE_ATTR_RO(pid);

static ssize_t dynamic_address_show(struct device *dev,
                                    struct device_attribute *da,
                                    char *buf)
{
        struct i3c_bus *bus = dev_to_i3cbus(dev);
        struct i3c_dev_desc *desc;
        ssize_t ret;

        i3c_bus_normaluse_lock(bus);
        desc = dev_to_i3cdesc(dev);
        ret = sprintf(buf, "%02x\n", desc->info.dyn_addr);
        i3c_bus_normaluse_unlock(bus);

        return ret;
}
static DEVICE_ATTR_RO(dynamic_address);

static const char * const hdrcap_strings[] = {
        "hdr-ddr", "hdr-tsp", "hdr-tsl",
};

static ssize_t hdrcap_show(struct device *dev,
                           struct device_attribute *da,
                           char *buf)
{
        struct i3c_bus *bus = dev_to_i3cbus(dev);
        struct i3c_dev_desc *desc;
        ssize_t offset = 0, ret;
        unsigned long caps;
        int mode;

        i3c_bus_normaluse_lock(bus);
        desc = dev_to_i3cdesc(dev);
        caps = desc->info.hdr_cap;
        for_each_set_bit(mode, &caps, 8) {
                if (mode >= ARRAY_SIZE(hdrcap_strings))
                        break;

                if (!hdrcap_strings[mode])
                        continue;

                ret = sprintf(buf + offset, offset ? " %s" : "%s",
                              hdrcap_strings[mode]);
                if (ret < 0)
                        goto out;

                offset += ret;
        }

        ret = sprintf(buf + offset, "\n");
        if (ret < 0)
                goto out;

        ret = offset + ret;

out:
        i3c_bus_normaluse_unlock(bus);

        return ret;
}
static DEVICE_ATTR_RO(hdrcap);

static ssize_t modalias_show(struct device *dev,
                             struct device_attribute *da, char *buf)
{
        struct i3c_device *i3c = dev_to_i3cdev(dev);
        struct i3c_device_info devinfo;
        u16 manuf, part, ext;

        i3c_device_get_info(i3c, &devinfo);
        manuf = I3C_PID_MANUF_ID(devinfo.pid);
        part = I3C_PID_PART_ID(devinfo.pid);
        ext = I3C_PID_EXTRA_INFO(devinfo.pid);

        if (I3C_PID_RND_LOWER_32BITS(devinfo.pid))
                return sprintf(buf, "i3c:dcr%02Xmanuf%04X", devinfo.dcr,
                               manuf);

        return sprintf(buf, "i3c:dcr%02Xmanuf%04Xpart%04Xext%04X",
                       devinfo.dcr, manuf, part, ext);
}
static DEVICE_ATTR_RO(modalias);

static struct attribute *i3c_device_attrs[] = {
        &dev_attr_bcr.attr,
        &dev_attr_dcr.attr,
        &dev_attr_pid.attr,
        &dev_attr_dynamic_address.attr,
        &dev_attr_hdrcap.attr,
        &dev_attr_modalias.attr,
        NULL,
};
ATTRIBUTE_GROUPS(i3c_device);

static int i3c_device_uevent(const struct device *dev, struct kobj_uevent_env *env)
{
        const struct i3c_device *i3cdev = dev_to_i3cdev(dev);
        struct i3c_device_info devinfo;
        u16 manuf, part, ext;

        i3c_device_get_info(i3cdev, &devinfo);
        manuf = I3C_PID_MANUF_ID(devinfo.pid);
        part = I3C_PID_PART_ID(devinfo.pid);
        ext = I3C_PID_EXTRA_INFO(devinfo.pid);

        if (I3C_PID_RND_LOWER_32BITS(devinfo.pid))
                return add_uevent_var(env, "MODALIAS=i3c:dcr%02Xmanuf%04X",
                                      devinfo.dcr, manuf);

        return add_uevent_var(env,
                              "MODALIAS=i3c:dcr%02Xmanuf%04Xpart%04Xext%04X",
                              devinfo.dcr, manuf, part, ext);
}

static const struct device_type i3c_device_type = {
        .groups = i3c_device_groups,
        .uevent = i3c_device_uevent,
};

static int i3c_device_match(struct device *dev, struct device_driver *drv)
{
        struct i3c_device *i3cdev;
        struct i3c_driver *i3cdrv;

        if (dev->type != &i3c_device_type)
                return 0;

        i3cdev = dev_to_i3cdev(dev);
        i3cdrv = drv_to_i3cdrv(drv);
        if (i3c_device_match_id(i3cdev, i3cdrv->id_table))
                return 1;

        return 0;
}

static int i3c_device_probe(struct device *dev)
{
        struct i3c_device *i3cdev = dev_to_i3cdev(dev);
        struct i3c_driver *driver = drv_to_i3cdrv(dev->driver);

        return driver->probe(i3cdev);
}

static void i3c_device_remove(struct device *dev)
{
        struct i3c_device *i3cdev = dev_to_i3cdev(dev);
        struct i3c_driver *driver = drv_to_i3cdrv(dev->driver);

        if (driver->remove)
                driver->remove(i3cdev);

        i3c_device_free_ibi(i3cdev);
}

struct bus_type i3c_bus_type = {
        .name = "i3c",
        .match = i3c_device_match,
        .probe = i3c_device_probe,
        .remove = i3c_device_remove,
};

static enum i3c_addr_slot_status
i3c_bus_get_addr_slot_status(struct i3c_bus *bus, u16 addr)
{
        unsigned long status;
        int bitpos = addr * 2;

        if (addr > I2C_MAX_ADDR)
                return I3C_ADDR_SLOT_RSVD;

        status = bus->addrslots[bitpos / BITS_PER_LONG];
        status >>= bitpos % BITS_PER_LONG;

        return status & I3C_ADDR_SLOT_STATUS_MASK;
}

static void i3c_bus_set_addr_slot_status(struct i3c_bus *bus, u16 addr,
                                         enum i3c_addr_slot_status status)
{
        int bitpos = addr * 2;
        unsigned long *ptr;

        if (addr > I2C_MAX_ADDR)
                return;

        ptr = bus->addrslots + (bitpos / BITS_PER_LONG);
        *ptr &= ~((unsigned long)I3C_ADDR_SLOT_STATUS_MASK <<
                                                (bitpos % BITS_PER_LONG));
        *ptr |= (unsigned long)status << (bitpos % BITS_PER_LONG);
}

static bool i3c_bus_dev_addr_is_avail(struct i3c_bus *bus, u8 addr)
{
        enum i3c_addr_slot_status status;

        status = i3c_bus_get_addr_slot_status(bus, addr);

        return status == I3C_ADDR_SLOT_FREE;
}

static int i3c_bus_get_free_addr(struct i3c_bus *bus, u8 start_addr)
{
        enum i3c_addr_slot_status status;
        u8 addr;

        for (addr = start_addr; addr < I3C_MAX_ADDR; addr++) {
                status = i3c_bus_get_addr_slot_status(bus, addr);
                if (status == I3C_ADDR_SLOT_FREE)
                        return addr;
        }

        return -ENOMEM;
}

static void i3c_bus_init_addrslots(struct i3c_bus *bus)
{
        int i;

        /* Addresses 0 to 7 are reserved. */
        for (i = 0; i < 8; i++)
                i3c_bus_set_addr_slot_status(bus, i, I3C_ADDR_SLOT_RSVD);

        /*
         * Reserve broadcast address and all addresses that might collide
         * with the broadcast address when facing a single bit error.
         */
        i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR,
                                     I3C_ADDR_SLOT_RSVD);
        for (i = 0; i < 7; i++)
                i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR ^ BIT(i),
                                             I3C_ADDR_SLOT_RSVD);
}

static void i3c_bus_cleanup(struct i3c_bus *i3cbus)
{
        mutex_lock(&i3c_core_lock);
        idr_remove(&i3c_bus_idr, i3cbus->id);
        mutex_unlock(&i3c_core_lock);
}

static int i3c_bus_init(struct i3c_bus *i3cbus, struct device_node *np)
{
        int ret, start, end, id = -1;

        init_rwsem(&i3cbus->lock);
        INIT_LIST_HEAD(&i3cbus->devs.i2c);
        INIT_LIST_HEAD(&i3cbus->devs.i3c);
        i3c_bus_init_addrslots(i3cbus);
        i3cbus->mode = I3C_BUS_MODE_PURE;

        if (np)
                id = of_alias_get_id(np, "i3c");

        mutex_lock(&i3c_core_lock);
        if (id >= 0) {
                start = id;
                end = start + 1;
        } else {
                start = __i3c_first_dynamic_bus_num;
                end = 0;
        }

        ret = idr_alloc(&i3c_bus_idr, i3cbus, start, end, GFP_KERNEL);
        mutex_unlock(&i3c_core_lock);

        if (ret < 0)
                return ret;

        i3cbus->id = ret;

        return 0;
}

static const char * const i3c_bus_mode_strings[] = {
        [I3C_BUS_MODE_PURE] = "pure",
        [I3C_BUS_MODE_MIXED_FAST] = "mixed-fast",
        [I3C_BUS_MODE_MIXED_LIMITED] = "mixed-limited",
        [I3C_BUS_MODE_MIXED_SLOW] = "mixed-slow",
};

static ssize_t mode_show(struct device *dev,
                         struct device_attribute *da,
                         char *buf)
{
        struct i3c_bus *i3cbus = dev_to_i3cbus(dev);
        ssize_t ret;

        i3c_bus_normaluse_lock(i3cbus);
        if (i3cbus->mode < 0 ||
            i3cbus->mode >= ARRAY_SIZE(i3c_bus_mode_strings) ||
            !i3c_bus_mode_strings[i3cbus->mode])
                ret = sprintf(buf, "unknown\n");
        else
                ret = sprintf(buf, "%s\n", i3c_bus_mode_strings[i3cbus->mode]);
        i3c_bus_normaluse_unlock(i3cbus);

        return ret;
}
static DEVICE_ATTR_RO(mode);

static ssize_t current_master_show(struct device *dev,
                                   struct device_attribute *da,
                                   char *buf)
{
        struct i3c_bus *i3cbus = dev_to_i3cbus(dev);
        ssize_t ret;

        i3c_bus_normaluse_lock(i3cbus);
        ret = sprintf(buf, "%d-%llx\n", i3cbus->id,
                      i3cbus->cur_master->info.pid);
        i3c_bus_normaluse_unlock(i3cbus);

        return ret;
}
static DEVICE_ATTR_RO(current_master);

static ssize_t i3c_scl_frequency_show(struct device *dev,
                                      struct device_attribute *da,
                                      char *buf)
{
        struct i3c_bus *i3cbus = dev_to_i3cbus(dev);
        ssize_t ret;

        i3c_bus_normaluse_lock(i3cbus);
        ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i3c);
        i3c_bus_normaluse_unlock(i3cbus);

        return ret;
}
static DEVICE_ATTR_RO(i3c_scl_frequency);

static ssize_t i2c_scl_frequency_show(struct device *dev,
                                      struct device_attribute *da,
                                      char *buf)
{
        struct i3c_bus *i3cbus = dev_to_i3cbus(dev);
        ssize_t ret;

        i3c_bus_normaluse_lock(i3cbus);
        ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i2c);
        i3c_bus_normaluse_unlock(i3cbus);

        return ret;
}
static DEVICE_ATTR_RO(i2c_scl_frequency);

static struct attribute *i3c_masterdev_attrs[] = {
        &dev_attr_mode.attr,
        &dev_attr_current_master.attr,
        &dev_attr_i3c_scl_frequency.attr,
        &dev_attr_i2c_scl_frequency.attr,
        &dev_attr_bcr.attr,
        &dev_attr_dcr.attr,
        &dev_attr_pid.attr,
        &dev_attr_dynamic_address.attr,
        &dev_attr_hdrcap.attr,
        NULL,
};
ATTRIBUTE_GROUPS(i3c_masterdev);

static void i3c_masterdev_release(struct device *dev)
{
        struct i3c_master_controller *master = dev_to_i3cmaster(dev);
        struct i3c_bus *bus = dev_to_i3cbus(dev);

        if (master->wq)
                destroy_workqueue(master->wq);

        WARN_ON(!list_empty(&bus->devs.i2c) || !list_empty(&bus->devs.i3c));
        i3c_bus_cleanup(bus);

        of_node_put(dev->of_node);
}

static const struct device_type i3c_masterdev_type = {
        .groups = i3c_masterdev_groups,
};

static int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode,
                            unsigned long max_i2c_scl_rate)
{
        struct i3c_master_controller *master = i3c_bus_to_i3c_master(i3cbus);

        i3cbus->mode = mode;

        switch (i3cbus->mode) {
        case I3C_BUS_MODE_PURE:
                if (!i3cbus->scl_rate.i3c)
                        i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
                break;
        case I3C_BUS_MODE_MIXED_FAST:
        case I3C_BUS_MODE_MIXED_LIMITED:
                if (!i3cbus->scl_rate.i3c)
                        i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
                if (!i3cbus->scl_rate.i2c)
                        i3cbus->scl_rate.i2c = max_i2c_scl_rate;
                break;
        case I3C_BUS_MODE_MIXED_SLOW:
                if (!i3cbus->scl_rate.i2c)
                        i3cbus->scl_rate.i2c = max_i2c_scl_rate;
                if (!i3cbus->scl_rate.i3c ||
                    i3cbus->scl_rate.i3c > i3cbus->scl_rate.i2c)
                        i3cbus->scl_rate.i3c = i3cbus->scl_rate.i2c;
                break;
        default:
                return -EINVAL;
        }

        dev_dbg(&master->dev, "i2c-scl = %ld Hz i3c-scl = %ld Hz\n",
                i3cbus->scl_rate.i2c, i3cbus->scl_rate.i3c);

        /*
         * I3C/I2C frequency may have been overridden, check that user-provided
         * values are not exceeding max possible frequency.
         */
        if (i3cbus->scl_rate.i3c > I3C_BUS_MAX_I3C_SCL_RATE ||
            i3cbus->scl_rate.i2c > I3C_BUS_I2C_FM_PLUS_SCL_RATE)
                return -EINVAL;

        return 0;
}

static struct i3c_master_controller *
i2c_adapter_to_i3c_master(struct i2c_adapter *adap)
{
        return container_of(adap, struct i3c_master_controller, i2c);
}

static struct i2c_adapter *
i3c_master_to_i2c_adapter(struct i3c_master_controller *master)
{
        return &master->i2c;
}

static void i3c_master_free_i2c_dev(struct i2c_dev_desc *dev)
{
        kfree(dev);
}

static struct i2c_dev_desc *
i3c_master_alloc_i2c_dev(struct i3c_master_controller *master,
                         u16 addr, u8 lvr)
{
        struct i2c_dev_desc *dev;

        dev = kzalloc(sizeof(*dev), GFP_KERNEL);
        if (!dev)
                return ERR_PTR(-ENOMEM);

        dev->common.master = master;
        dev->addr = addr;
        dev->lvr = lvr;

        return dev;
}

static void *i3c_ccc_cmd_dest_init(struct i3c_ccc_cmd_dest *dest, u8 addr,
                                   u16 payloadlen)
{
        dest->addr = addr;
        dest->payload.len = payloadlen;
        if (payloadlen)
                dest->payload.data = kzalloc(payloadlen, GFP_KERNEL);
        else
                dest->payload.data = NULL;

        return dest->payload.data;
}

static void i3c_ccc_cmd_dest_cleanup(struct i3c_ccc_cmd_dest *dest)
{
        kfree(dest->payload.data);
}

static void i3c_ccc_cmd_init(struct i3c_ccc_cmd *cmd, bool rnw, u8 id,
                             struct i3c_ccc_cmd_dest *dests,
                             unsigned int ndests)
{
        cmd->rnw = rnw ? 1 : 0;
        cmd->id = id;
        cmd->dests = dests;
        cmd->ndests = ndests;
        cmd->err = I3C_ERROR_UNKNOWN;
}

static int i3c_master_send_ccc_cmd_locked(struct i3c_master_controller *master,
                                          struct i3c_ccc_cmd *cmd)
{
        int ret;

        if (!cmd || !master)
                return -EINVAL;

        if (WARN_ON(master->init_done &&
                    !rwsem_is_locked(&master->bus.lock)))
                return -EINVAL;

        if (!master->ops->send_ccc_cmd)
                return -ENOTSUPP;

        if ((cmd->id & I3C_CCC_DIRECT) && (!cmd->dests || !cmd->ndests))
                return -EINVAL;

        if (master->ops->supports_ccc_cmd &&
            !master->ops->supports_ccc_cmd(master, cmd))
                return -ENOTSUPP;

        ret = master->ops->send_ccc_cmd(master, cmd);
        if (ret) {
                if (cmd->err != I3C_ERROR_UNKNOWN)
                        return cmd->err;

                return ret;
        }

        return 0;
}

static struct i2c_dev_desc *
i3c_master_find_i2c_dev_by_addr(const struct i3c_master_controller *master,
                                u16 addr)
{
        struct i2c_dev_desc *dev;

        i3c_bus_for_each_i2cdev(&master->bus, dev) {
                if (dev->addr == addr)
                        return dev;
        }

        return NULL;
}

/**
 * i3c_master_get_free_addr() - get a free address on the bus
 * @master: I3C master object
 * @start_addr: where to start searching
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: the first free address starting at @start_addr (included) or -ENOMEM
 * if there's no more address available.
 */
int i3c_master_get_free_addr(struct i3c_master_controller *master,
                             u8 start_addr)
{
        return i3c_bus_get_free_addr(&master->bus, start_addr);
}
EXPORT_SYMBOL_GPL(i3c_master_get_free_addr);

static void i3c_device_release(struct device *dev)
{
        struct i3c_device *i3cdev = dev_to_i3cdev(dev);

        WARN_ON(i3cdev->desc);

        of_node_put(i3cdev->dev.of_node);
        kfree(i3cdev);
}

static void i3c_master_free_i3c_dev(struct i3c_dev_desc *dev)
{
        kfree(dev);
}

static struct i3c_dev_desc *
i3c_master_alloc_i3c_dev(struct i3c_master_controller *master,
                         const struct i3c_device_info *info)
{
        struct i3c_dev_desc *dev;

        dev = kzalloc(sizeof(*dev), GFP_KERNEL);
        if (!dev)
                return ERR_PTR(-ENOMEM);

        dev->common.master = master;
        dev->info = *info;
        mutex_init(&dev->ibi_lock);

        return dev;
}

static int i3c_master_rstdaa_locked(struct i3c_master_controller *master,
                                    u8 addr)
{
        enum i3c_addr_slot_status addrstat;
        struct i3c_ccc_cmd_dest dest;
        struct i3c_ccc_cmd cmd;
        int ret;

        if (!master)
                return -EINVAL;

        addrstat = i3c_bus_get_addr_slot_status(&master->bus, addr);
        if (addr != I3C_BROADCAST_ADDR && addrstat != I3C_ADDR_SLOT_I3C_DEV)
                return -EINVAL;

        i3c_ccc_cmd_dest_init(&dest, addr, 0);
        i3c_ccc_cmd_init(&cmd, false,
                         I3C_CCC_RSTDAA(addr == I3C_BROADCAST_ADDR),
                         &dest, 1);
        ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
        i3c_ccc_cmd_dest_cleanup(&dest);

        return ret;
}

/**
 * i3c_master_entdaa_locked() - start a DAA (Dynamic Address Assignment)
 *                              procedure
 * @master: master used to send frames on the bus
 *
 * Send a ENTDAA CCC command to start a DAA procedure.
 *
 * Note that this function only sends the ENTDAA CCC command, all the logic
 * behind dynamic address assignment has to be handled in the I3C master
 * driver.
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: 0 in case of success, a positive I3C error code if the error is
 * one of the official Mx error codes, and a negative error code otherwise.
 */
int i3c_master_entdaa_locked(struct i3c_master_controller *master)
{
        struct i3c_ccc_cmd_dest dest;
        struct i3c_ccc_cmd cmd;
        int ret;

        i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR, 0);
        i3c_ccc_cmd_init(&cmd, false, I3C_CCC_ENTDAA, &dest, 1);
        ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
        i3c_ccc_cmd_dest_cleanup(&dest);

        return ret;
}
EXPORT_SYMBOL_GPL(i3c_master_entdaa_locked);

static int i3c_master_enec_disec_locked(struct i3c_master_controller *master,
                                        u8 addr, bool enable, u8 evts)
{
        struct i3c_ccc_events *events;
        struct i3c_ccc_cmd_dest dest;
        struct i3c_ccc_cmd cmd;
        int ret;

        events = i3c_ccc_cmd_dest_init(&dest, addr, sizeof(*events));
        if (!events)
                return -ENOMEM;

        events->events = evts;
        i3c_ccc_cmd_init(&cmd, false,
                         enable ?
                         I3C_CCC_ENEC(addr == I3C_BROADCAST_ADDR) :
                         I3C_CCC_DISEC(addr == I3C_BROADCAST_ADDR),
                         &dest, 1);
        ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
        i3c_ccc_cmd_dest_cleanup(&dest);

        return ret;
}

/**
 * i3c_master_disec_locked() - send a DISEC CCC command
 * @master: master used to send frames on the bus
 * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR
 * @evts: events to disable
 *
 * Send a DISEC CCC command to disable some or all events coming from a
 * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR.
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: 0 in case of success, a positive I3C error code if the error is
 * one of the official Mx error codes, and a negative error code otherwise.
 */
int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr,
                            u8 evts)
{
        return i3c_master_enec_disec_locked(master, addr, false, evts);
}
EXPORT_SYMBOL_GPL(i3c_master_disec_locked);

/**
 * i3c_master_enec_locked() - send an ENEC CCC command
 * @master: master used to send frames on the bus
 * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR
 * @evts: events to disable
 *
 * Sends an ENEC CCC command to enable some or all events coming from a
 * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR.
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: 0 in case of success, a positive I3C error code if the error is
 * one of the official Mx error codes, and a negative error code otherwise.
 */
int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr,
                           u8 evts)
{
        return i3c_master_enec_disec_locked(master, addr, true, evts);
}
EXPORT_SYMBOL_GPL(i3c_master_enec_locked);

/**
 * i3c_master_defslvs_locked() - send a DEFSLVS CCC command
 * @master: master used to send frames on the bus
 *
 * Send a DEFSLVS CCC command containing all the devices known to the @master.
 * This is useful when you have secondary masters on the bus to propagate
 * device information.
 *
 * This should be called after all I3C devices have been discovered (in other
 * words, after the DAA procedure has finished) and instantiated in
 * &i3c_master_controller_ops->bus_init().
 * It should also be called if a master ACKed an Hot-Join request and assigned
 * a dynamic address to the device joining the bus.
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: 0 in case of success, a positive I3C error code if the error is
 * one of the official Mx error codes, and a negative error code otherwise.
 */
int i3c_master_defslvs_locked(struct i3c_master_controller *master)
{
        struct i3c_ccc_defslvs *defslvs;
        struct i3c_ccc_dev_desc *desc;
        struct i3c_ccc_cmd_dest dest;
        struct i3c_dev_desc *i3cdev;
        struct i2c_dev_desc *i2cdev;
        struct i3c_ccc_cmd cmd;
        struct i3c_bus *bus;
        bool send = false;
        int ndevs = 0, ret;

        if (!master)
                return -EINVAL;

        bus = i3c_master_get_bus(master);
        i3c_bus_for_each_i3cdev(bus, i3cdev) {
                ndevs++;

                if (i3cdev == master->this)
                        continue;

                if (I3C_BCR_DEVICE_ROLE(i3cdev->info.bcr) ==
                    I3C_BCR_I3C_MASTER)
                        send = true;
        }

        /* No other master on the bus, skip DEFSLVS. */
        if (!send)
                return 0;

        i3c_bus_for_each_i2cdev(bus, i2cdev)
                ndevs++;

        defslvs = i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR,
                                        struct_size(defslvs, slaves,
                                                    ndevs - 1));
        if (!defslvs)
                return -ENOMEM;

        defslvs->count = ndevs;
        defslvs->master.bcr = master->this->info.bcr;
        defslvs->master.dcr = master->this->info.dcr;
        defslvs->master.dyn_addr = master->this->info.dyn_addr << 1;
        defslvs->master.static_addr = I3C_BROADCAST_ADDR << 1;

        desc = defslvs->slaves;
        i3c_bus_for_each_i2cdev(bus, i2cdev) {
                desc->lvr = i2cdev->lvr;
                desc->static_addr = i2cdev->addr << 1;
                desc++;
        }

        i3c_bus_for_each_i3cdev(bus, i3cdev) {
                /* Skip the I3C dev representing this master. */
                if (i3cdev == master->this)
                        continue;

                desc->bcr = i3cdev->info.bcr;
                desc->dcr = i3cdev->info.dcr;
                desc->dyn_addr = i3cdev->info.dyn_addr << 1;
                desc->static_addr = i3cdev->info.static_addr << 1;
                desc++;
        }

        i3c_ccc_cmd_init(&cmd, false, I3C_CCC_DEFSLVS, &dest, 1);
        ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
        i3c_ccc_cmd_dest_cleanup(&dest);

        return ret;
}
EXPORT_SYMBOL_GPL(i3c_master_defslvs_locked);

static int i3c_master_setda_locked(struct i3c_master_controller *master,
                                   u8 oldaddr, u8 newaddr, bool setdasa)
{
        struct i3c_ccc_cmd_dest dest;
        struct i3c_ccc_setda *setda;
        struct i3c_ccc_cmd cmd;
        int ret;

        if (!oldaddr || !newaddr)
                return -EINVAL;

        setda = i3c_ccc_cmd_dest_init(&dest, oldaddr, sizeof(*setda));
        if (!setda)
                return -ENOMEM;

        setda->addr = newaddr << 1;
        i3c_ccc_cmd_init(&cmd, false,
                         setdasa ? I3C_CCC_SETDASA : I3C_CCC_SETNEWDA,
                         &dest, 1);
        ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
        i3c_ccc_cmd_dest_cleanup(&dest);

        return ret;
}

static int i3c_master_setdasa_locked(struct i3c_master_controller *master,
                                     u8 static_addr, u8 dyn_addr)
{
        return i3c_master_setda_locked(master, static_addr, dyn_addr, true);
}

static int i3c_master_setnewda_locked(struct i3c_master_controller *master,
                                      u8 oldaddr, u8 newaddr)
{
        return i3c_master_setda_locked(master, oldaddr, newaddr, false);
}

static int i3c_master_getmrl_locked(struct i3c_master_controller *master,
                                    struct i3c_device_info *info)
{
        struct i3c_ccc_cmd_dest dest;
        struct i3c_ccc_mrl *mrl;
        struct i3c_ccc_cmd cmd;
        int ret;

        mrl = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*mrl));
        if (!mrl)
                return -ENOMEM;

        /*
         * When the device does not have IBI payload GETMRL only returns 2
         * bytes of data.
         */
        if (!(info->bcr & I3C_BCR_IBI_PAYLOAD))
                dest.payload.len -= 1;

        i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMRL, &dest, 1);
        ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
        if (ret)
                goto out;

        switch (dest.payload.len) {
        case 3:
                info->max_ibi_len = mrl->ibi_len;
                fallthrough;
        case 2:
                info->max_read_len = be16_to_cpu(mrl->read_len);
                break;
        default:
                ret = -EIO;
                goto out;
        }

out:
        i3c_ccc_cmd_dest_cleanup(&dest);

        return ret;
}

static int i3c_master_getmwl_locked(struct i3c_master_controller *master,
                                    struct i3c_device_info *info)
{
        struct i3c_ccc_cmd_dest dest;
        struct i3c_ccc_mwl *mwl;
        struct i3c_ccc_cmd cmd;
        int ret;

        mwl = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*mwl));
        if (!mwl)
                return -ENOMEM;

        i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMWL, &dest, 1);
        ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
        if (ret)
                goto out;

        if (dest.payload.len != sizeof(*mwl)) {
                ret = -EIO;
                goto out;
        }

        info->max_write_len = be16_to_cpu(mwl->len);

out:
        i3c_ccc_cmd_dest_cleanup(&dest);

        return ret;
}

static int i3c_master_getmxds_locked(struct i3c_master_controller *master,
                                     struct i3c_device_info *info)
{
        struct i3c_ccc_getmxds *getmaxds;
        struct i3c_ccc_cmd_dest dest;
        struct i3c_ccc_cmd cmd;
        int ret;

        getmaxds = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr,
                                         sizeof(*getmaxds));
        if (!getmaxds)
                return -ENOMEM;

        i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMXDS, &dest, 1);
        ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
        if (ret)
                goto out;

        if (dest.payload.len != 2 && dest.payload.len != 5) {
                ret = -EIO;
                goto out;
        }

        info->max_read_ds = getmaxds->maxrd;
        info->max_write_ds = getmaxds->maxwr;
        if (dest.payload.len == 5)
                info->max_read_turnaround = getmaxds->maxrdturn[0] |
                                            ((u32)getmaxds->maxrdturn[1] << 8) |
                                            ((u32)getmaxds->maxrdturn[2] << 16);

out:
        i3c_ccc_cmd_dest_cleanup(&dest);

        return ret;
}

static int i3c_master_gethdrcap_locked(struct i3c_master_controller *master,
                                       struct i3c_device_info *info)
{
        struct i3c_ccc_gethdrcap *gethdrcap;
        struct i3c_ccc_cmd_dest dest;
        struct i3c_ccc_cmd cmd;
        int ret;

        gethdrcap = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr,
                                          sizeof(*gethdrcap));
        if (!gethdrcap)
                return -ENOMEM;

        i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETHDRCAP, &dest, 1);
        ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
        if (ret)
                goto out;

        if (dest.payload.len != 1) {
                ret = -EIO;
                goto out;
        }

        info->hdr_cap = gethdrcap->modes;

out:
        i3c_ccc_cmd_dest_cleanup(&dest);

        return ret;
}

static int i3c_master_getpid_locked(struct i3c_master_controller *master,
                                    struct i3c_device_info *info)
{
        struct i3c_ccc_getpid *getpid;
        struct i3c_ccc_cmd_dest dest;
        struct i3c_ccc_cmd cmd;
        int ret, i;

        getpid = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getpid));
        if (!getpid)
                return -ENOMEM;

        i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETPID, &dest, 1);
        ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
        if (ret)
                goto out;

        info->pid = 0;
        for (i = 0; i < sizeof(getpid->pid); i++) {
                int sft = (sizeof(getpid->pid) - i - 1) * 8;

                info->pid |= (u64)getpid->pid[i] << sft;
        }

out:
        i3c_ccc_cmd_dest_cleanup(&dest);

        return ret;
}

static int i3c_master_getbcr_locked(struct i3c_master_controller *master,
                                    struct i3c_device_info *info)
{
        struct i3c_ccc_getbcr *getbcr;
        struct i3c_ccc_cmd_dest dest;
        struct i3c_ccc_cmd cmd;
        int ret;

        getbcr = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getbcr));
        if (!getbcr)
                return -ENOMEM;

        i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETBCR, &dest, 1);
        ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
        if (ret)
                goto out;

        info->bcr = getbcr->bcr;

out:
        i3c_ccc_cmd_dest_cleanup(&dest);

        return ret;
}

static int i3c_master_getdcr_locked(struct i3c_master_controller *master,
                                    struct i3c_device_info *info)
{
        struct i3c_ccc_getdcr *getdcr;
        struct i3c_ccc_cmd_dest dest;
        struct i3c_ccc_cmd cmd;
        int ret;

        getdcr = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getdcr));
        if (!getdcr)
                return -ENOMEM;

        i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETDCR, &dest, 1);
        ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
        if (ret)
                goto out;

        info->dcr = getdcr->dcr;

out:
        i3c_ccc_cmd_dest_cleanup(&dest);

        return ret;
}

static int i3c_master_retrieve_dev_info(struct i3c_dev_desc *dev)
{
        struct i3c_master_controller *master = i3c_dev_get_master(dev);
        enum i3c_addr_slot_status slot_status;
        int ret;

        if (!dev->info.dyn_addr)
                return -EINVAL;

        slot_status = i3c_bus_get_addr_slot_status(&master->bus,
                                                   dev->info.dyn_addr);
        if (slot_status == I3C_ADDR_SLOT_RSVD ||
            slot_status == I3C_ADDR_SLOT_I2C_DEV)
                return -EINVAL;

        ret = i3c_master_getpid_locked(master, &dev->info);
        if (ret)
                return ret;

        ret = i3c_master_getbcr_locked(master, &dev->info);
        if (ret)
                return ret;

        ret = i3c_master_getdcr_locked(master, &dev->info);
        if (ret)
                return ret;

        if (dev->info.bcr & I3C_BCR_MAX_DATA_SPEED_LIM) {
                ret = i3c_master_getmxds_locked(master, &dev->info);
                if (ret)
                        return ret;
        }

        if (dev->info.bcr & I3C_BCR_IBI_PAYLOAD)
                dev->info.max_ibi_len = 1;

        i3c_master_getmrl_locked(master, &dev->info);
        i3c_master_getmwl_locked(master, &dev->info);

        if (dev->info.bcr & I3C_BCR_HDR_CAP) {
                ret = i3c_master_gethdrcap_locked(master, &dev->info);
                if (ret)
                        return ret;
        }

        return 0;
}

static void i3c_master_put_i3c_addrs(struct i3c_dev_desc *dev)
{
        struct i3c_master_controller *master = i3c_dev_get_master(dev);

        if (dev->info.static_addr)
                i3c_bus_set_addr_slot_status(&master->bus,
                                             dev->info.static_addr,
                                             I3C_ADDR_SLOT_FREE);

        if (dev->info.dyn_addr)
                i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr,
                                             I3C_ADDR_SLOT_FREE);

        if (dev->boardinfo && dev->boardinfo->init_dyn_addr)
                i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr,
                                             I3C_ADDR_SLOT_FREE);
}

static int i3c_master_get_i3c_addrs(struct i3c_dev_desc *dev)
{
        struct i3c_master_controller *master = i3c_dev_get_master(dev);
        enum i3c_addr_slot_status status;

        if (!dev->info.static_addr && !dev->info.dyn_addr)
                return 0;

        if (dev->info.static_addr) {
                status = i3c_bus_get_addr_slot_status(&master->bus,
                                                      dev->info.static_addr);
                if (status != I3C_ADDR_SLOT_FREE)
                        return -EBUSY;

                i3c_bus_set_addr_slot_status(&master->bus,
                                             dev->info.static_addr,
                                             I3C_ADDR_SLOT_I3C_DEV);
        }

        /*
         * ->init_dyn_addr should have been reserved before that, so, if we're
         * trying to apply a pre-reserved dynamic address, we should not try
         * to reserve the address slot a second time.
         */
        if (dev->info.dyn_addr &&
            (!dev->boardinfo ||
             dev->boardinfo->init_dyn_addr != dev->info.dyn_addr)) {
                status = i3c_bus_get_addr_slot_status(&master->bus,
                                                      dev->info.dyn_addr);
                if (status != I3C_ADDR_SLOT_FREE)
                        goto err_release_static_addr;

                i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr,
                                             I3C_ADDR_SLOT_I3C_DEV);
        }

        return 0;

err_release_static_addr:
        if (dev->info.static_addr)
                i3c_bus_set_addr_slot_status(&master->bus,
                                             dev->info.static_addr,
                                             I3C_ADDR_SLOT_FREE);

        return -EBUSY;
}

static int i3c_master_attach_i3c_dev(struct i3c_master_controller *master,
                                     struct i3c_dev_desc *dev)
{
        int ret;

        /*
         * We don't attach devices to the controller until they are
         * addressable on the bus.
         */
        if (!dev->info.static_addr && !dev->info.dyn_addr)
                return 0;

        ret = i3c_master_get_i3c_addrs(dev);
        if (ret)
                return ret;

        /* Do not attach the master device itself. */
        if (master->this != dev && master->ops->attach_i3c_dev) {
                ret = master->ops->attach_i3c_dev(dev);
                if (ret) {
                        i3c_master_put_i3c_addrs(dev);
                        return ret;
                }
        }

        list_add_tail(&dev->common.node, &master->bus.devs.i3c);

        return 0;
}

static int i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev,
                                       u8 old_dyn_addr)
{
        struct i3c_master_controller *master = i3c_dev_get_master(dev);
        enum i3c_addr_slot_status status;
        int ret;

        if (dev->info.dyn_addr != old_dyn_addr &&
            (!dev->boardinfo ||
             dev->info.dyn_addr != dev->boardinfo->init_dyn_addr)) {
                status = i3c_bus_get_addr_slot_status(&master->bus,
                                                      dev->info.dyn_addr);
                if (status != I3C_ADDR_SLOT_FREE)
                        return -EBUSY;
                i3c_bus_set_addr_slot_status(&master->bus,
                                             dev->info.dyn_addr,
                                             I3C_ADDR_SLOT_I3C_DEV);
                if (old_dyn_addr)
                        i3c_bus_set_addr_slot_status(&master->bus, old_dyn_addr,
                                                     I3C_ADDR_SLOT_FREE);
        }

        if (master->ops->reattach_i3c_dev) {
                ret = master->ops->reattach_i3c_dev(dev, old_dyn_addr);
                if (ret) {
                        i3c_master_put_i3c_addrs(dev);
                        return ret;
                }
        }

        return 0;
}

static void i3c_master_detach_i3c_dev(struct i3c_dev_desc *dev)
{
        struct i3c_master_controller *master = i3c_dev_get_master(dev);

        /* Do not detach the master device itself. */
        if (master->this != dev && master->ops->detach_i3c_dev)
                master->ops->detach_i3c_dev(dev);

        i3c_master_put_i3c_addrs(dev);
        list_del(&dev->common.node);
}

static int i3c_master_attach_i2c_dev(struct i3c_master_controller *master,
                                     struct i2c_dev_desc *dev)
{
        int ret;

        if (master->ops->attach_i2c_dev) {
                ret = master->ops->attach_i2c_dev(dev);
                if (ret)
                        return ret;
        }

        list_add_tail(&dev->common.node, &master->bus.devs.i2c);

        return 0;
}

static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
{
        struct i3c_master_controller *master = i2c_dev_get_master(dev);

        list_del(&dev->common.node);

        if (master->ops->detach_i2c_dev)
                master->ops->detach_i2c_dev(dev);
}

static int i3c_master_early_i3c_dev_add(struct i3c_master_controller *master,
                                          struct i3c_dev_boardinfo *boardinfo)
{
        struct i3c_device_info info = {
                .static_addr = boardinfo->static_addr,
                .pid = boardinfo->pid,
        };
        struct i3c_dev_desc *i3cdev;
        int ret;

        i3cdev = i3c_master_alloc_i3c_dev(master, &info);
        if (IS_ERR(i3cdev))
                return -ENOMEM;

        i3cdev->boardinfo = boardinfo;

        ret = i3c_master_attach_i3c_dev(master, i3cdev);
        if (ret)
                goto err_free_dev;

        ret = i3c_master_setdasa_locked(master, i3cdev->info.static_addr,
                                        i3cdev->boardinfo->init_dyn_addr);
        if (ret)
                goto err_detach_dev;

        i3cdev->info.dyn_addr = i3cdev->boardinfo->init_dyn_addr;
        ret = i3c_master_reattach_i3c_dev(i3cdev, 0);
        if (ret)
                goto err_rstdaa;

        ret = i3c_master_retrieve_dev_info(i3cdev);
        if (ret)
                goto err_rstdaa;

        return 0;

err_rstdaa:
        i3c_master_rstdaa_locked(master, i3cdev->boardinfo->init_dyn_addr);
err_detach_dev:
        i3c_master_detach_i3c_dev(i3cdev);
err_free_dev:
        i3c_master_free_i3c_dev(i3cdev);

        return ret;
}

static void
i3c_master_register_new_i3c_devs(struct i3c_master_controller *master)
{
        struct i3c_dev_desc *desc;
        int ret;

        if (!master->init_done)
                return;

        i3c_bus_for_each_i3cdev(&master->bus, desc) {
                if (desc->dev || !desc->info.dyn_addr || desc == master->this)
                        continue;

                desc->dev = kzalloc(sizeof(*desc->dev), GFP_KERNEL);
                if (!desc->dev)
                        continue;

                desc->dev->bus = &master->bus;
                desc->dev->desc = desc;
                desc->dev->dev.parent = &master->dev;
                desc->dev->dev.type = &i3c_device_type;
                desc->dev->dev.bus = &i3c_bus_type;
                desc->dev->dev.release = i3c_device_release;
                dev_set_name(&desc->dev->dev, "%d-%llx", master->bus.id,
                             desc->info.pid);

                if (desc->boardinfo)
                        desc->dev->dev.of_node = desc->boardinfo->of_node;

                ret = device_register(&desc->dev->dev);
                if (ret)
                        dev_err(&master->dev,
                                "Failed to add I3C device (err = %d)\n", ret);
        }
}

/**
 * i3c_master_do_daa() - do a DAA (Dynamic Address Assignment)
 * @master: master doing the DAA
 *
 * This function is instantiating an I3C device object and adding it to the
 * I3C device list. All device information are automatically retrieved using
 * standard CCC commands.
 *
 * The I3C device object is returned in case the master wants to attach
 * private data to it using i3c_dev_set_master_data().
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: a 0 in case of success, an negative error code otherwise.
 */
int i3c_master_do_daa(struct i3c_master_controller *master)
{
        int ret;

        i3c_bus_maintenance_lock(&master->bus);
        ret = master->ops->do_daa(master);
        i3c_bus_maintenance_unlock(&master->bus);

        if (ret)
                return ret;

        i3c_bus_normaluse_lock(&master->bus);
        i3c_master_register_new_i3c_devs(master);
        i3c_bus_normaluse_unlock(&master->bus);

        return 0;
}
EXPORT_SYMBOL_GPL(i3c_master_do_daa);

/**
 * i3c_master_set_info() - set master device information
 * @master: master used to send frames on the bus
 * @info: I3C device information
 *
 * Set master device info. This should be called from
 * &i3c_master_controller_ops->bus_init().
 *
 * Not all &i3c_device_info fields are meaningful for a master device.
 * Here is a list of fields that should be properly filled:
 *
 * - &i3c_device_info->dyn_addr
 * - &i3c_device_info->bcr
 * - &i3c_device_info->dcr
 * - &i3c_device_info->pid
 * - &i3c_device_info->hdr_cap if %I3C_BCR_HDR_CAP bit is set in
 *   &i3c_device_info->bcr
 *
 * This function must be called with the bus lock held in maintenance mode.
 *
 * Return: 0 if @info contains valid information (not every piece of
 * information can be checked, but we can at least make sure @info->dyn_addr
 * and @info->bcr are correct), -EINVAL otherwise.
 */
int i3c_master_set_info(struct i3c_master_controller *master,
                        const struct i3c_device_info *info)
{
        struct i3c_dev_desc *i3cdev;
        int ret;

        if (!i3c_bus_dev_addr_is_avail(&master->bus, info->dyn_addr))
                return -EINVAL;

        if (I3C_BCR_DEVICE_ROLE(info->bcr) == I3C_BCR_I3C_MASTER &&
            master->secondary)
                return -EINVAL;

        if (master->this)
                return -EINVAL;

        i3cdev = i3c_master_alloc_i3c_dev(master, info);
        if (IS_ERR(i3cdev))
                return PTR_ERR(i3cdev);

        master->this = i3cdev;
        master->bus.cur_master = master->this;

        ret = i3c_master_attach_i3c_dev(master, i3cdev);
        if (ret)
                goto err_free_dev;

        return 0;

err_free_dev:
        i3c_master_free_i3c_dev(i3cdev);

        return ret;
}
EXPORT_SYMBOL_GPL(i3c_master_set_info);

static void i3c_master_detach_free_devs(struct i3c_master_controller *master)
{
        struct i3c_dev_desc *i3cdev, *i3ctmp;
        struct i2c_dev_desc *i2cdev, *i2ctmp;

        list_for_each_entry_safe(i3cdev, i3ctmp, &master->bus.devs.i3c,
                                 common.node) {
                i3c_master_detach_i3c_dev(i3cdev);

                if (i3cdev->boardinfo && i3cdev->boardinfo->init_dyn_addr)
                        i3c_bus_set_addr_slot_status(&master->bus,
                                        i3cdev->boardinfo->init_dyn_addr,
                                        I3C_ADDR_SLOT_FREE);

                i3c_master_free_i3c_dev(i3cdev);
        }

        list_for_each_entry_safe(i2cdev, i2ctmp, &master->bus.devs.i2c,
                                 common.node) {
                i3c_master_detach_i2c_dev(i2cdev);
                i3c_bus_set_addr_slot_status(&master->bus,
                                             i2cdev->addr,
                                             I3C_ADDR_SLOT_FREE);
                i3c_master_free_i2c_dev(i2cdev);
        }
}

/**
 * i3c_master_bus_init() - initialize an I3C bus
 * @master: main master initializing the bus
 *
 * This function is following all initialisation steps described in the I3C
 * specification:
 *
 * 1. Attach I2C devs to the master so that the master can fill its internal
 *    device table appropriately
 *
 * 2. Call &i3c_master_controller_ops->bus_init() method to initialize
 *    the master controller. That's usually where the bus mode is selected
 *    (pure bus or mixed fast/slow bus)
 *
 * 3. Instruct all devices on the bus to drop their dynamic address. This is
 *    particularly important when the bus was previously configured by someone
 *    else (for example the bootloader)
 *
 * 4. Disable all slave events.
 *
 * 5. Reserve address slots for I3C devices with init_dyn_addr. And if devices
 *    also have static_addr, try to pre-assign dynamic addresses requested by
 *    the FW with SETDASA and attach corresponding statically defined I3C
 *    devices to the master.
 *
 * 6. Do a DAA (Dynamic Address Assignment) to assign dynamic addresses to all
 *    remaining I3C devices
 *
 * Once this is done, all I3C and I2C devices should be usable.
 *
 * Return: a 0 in case of success, an negative error code otherwise.
 */
static int i3c_master_bus_init(struct i3c_master_controller *master)
{
        enum i3c_addr_slot_status status;
        struct i2c_dev_boardinfo *i2cboardinfo;
        struct i3c_dev_boardinfo *i3cboardinfo;
        struct i2c_dev_desc *i2cdev;
        int ret;

        /*
         * First attach all devices with static definitions provided by the
         * FW.
         */
        list_for_each_entry(i2cboardinfo, &master->boardinfo.i2c, node) {
                status = i3c_bus_get_addr_slot_status(&master->bus,
                                                      i2cboardinfo->base.addr);
                if (status != I3C_ADDR_SLOT_FREE) {
                        ret = -EBUSY;
                        goto err_detach_devs;
                }

                i3c_bus_set_addr_slot_status(&master->bus,
                                             i2cboardinfo->base.addr,
                                             I3C_ADDR_SLOT_I2C_DEV);

                i2cdev = i3c_master_alloc_i2c_dev(master,
                                                  i2cboardinfo->base.addr,
                                                  i2cboardinfo->lvr);
                if (IS_ERR(i2cdev)) {
                        ret = PTR_ERR(i2cdev);
                        goto err_detach_devs;
                }

                ret = i3c_master_attach_i2c_dev(master, i2cdev);
                if (ret) {
                        i3c_master_free_i2c_dev(i2cdev);
                        goto err_detach_devs;
                }
        }

        /*
         * Now execute the controller specific ->bus_init() routine, which
         * might configure its internal logic to match the bus limitations.
         */
        ret = master->ops->bus_init(master);
        if (ret)
                goto err_detach_devs;

        /*
         * The master device should have been instantiated in ->bus_init(),
         * complain if this was not the case.
         */
        if (!master->this) {
                dev_err(&master->dev,
                        "master_set_info() was not called in ->bus_init()\n");
                ret = -EINVAL;
                goto err_bus_cleanup;
        }

        /*
         * Reset all dynamic address that may have been assigned before
         * (assigned by the bootloader for example).
         */
        ret = i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR);
        if (ret && ret != I3C_ERROR_M2)
                goto err_bus_cleanup;

        /* Disable all slave events before starting DAA. */
        ret = i3c_master_disec_locked(master, I3C_BROADCAST_ADDR,
                                      I3C_CCC_EVENT_SIR | I3C_CCC_EVENT_MR |
                                      I3C_CCC_EVENT_HJ);
        if (ret && ret != I3C_ERROR_M2)
                goto err_bus_cleanup;

        /*
         * Reserve init_dyn_addr first, and then try to pre-assign dynamic
         * address and retrieve device information if needed.
         * In case pre-assign dynamic address fails, setting dynamic address to
         * the requested init_dyn_addr is retried after DAA is done in
         * i3c_master_add_i3c_dev_locked().
         */
        list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {

                /*
                 * We don't reserve a dynamic address for devices that
                 * don't explicitly request one.
                 */
                if (!i3cboardinfo->init_dyn_addr)
                        continue;

                ret = i3c_bus_get_addr_slot_status(&master->bus,
                                                   i3cboardinfo->init_dyn_addr);
                if (ret != I3C_ADDR_SLOT_FREE) {
                        ret = -EBUSY;
                        goto err_rstdaa;
                }

                i3c_bus_set_addr_slot_status(&master->bus,
                                             i3cboardinfo->init_dyn_addr,
                                             I3C_ADDR_SLOT_I3C_DEV);

                /*
                 * Only try to create/attach devices that have a static
                 * address. Other devices will be created/attached when
                 * DAA happens, and the requested dynamic address will
                 * be set using SETNEWDA once those devices become
                 * addressable.
                 */

                if (i3cboardinfo->static_addr)
                        i3c_master_early_i3c_dev_add(master, i3cboardinfo);
        }

        ret = i3c_master_do_daa(master);
        if (ret)
                goto err_rstdaa;

        return 0;

err_rstdaa:
        i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR);

err_bus_cleanup:
        if (master->ops->bus_cleanup)
                master->ops->bus_cleanup(master);

err_detach_devs:
        i3c_master_detach_free_devs(master);

        return ret;
}

static void i3c_master_bus_cleanup(struct i3c_master_controller *master)
{
        if (master->ops->bus_cleanup)
                master->ops->bus_cleanup(master);

        i3c_master_detach_free_devs(master);
}

static void i3c_master_attach_boardinfo(struct i3c_dev_desc *i3cdev)
{
        struct i3c_master_controller *master = i3cdev->common.master;
        struct i3c_dev_boardinfo *i3cboardinfo;

        list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
                if (i3cdev->info.pid != i3cboardinfo->pid)
                        continue;

                i3cdev->boardinfo = i3cboardinfo;
                i3cdev->info.static_addr = i3cboardinfo->static_addr;
                return;
        }
}

static struct i3c_dev_desc *
i3c_master_search_i3c_dev_duplicate(struct i3c_dev_desc *refdev)
{
        struct i3c_master_controller *master = i3c_dev_get_master(refdev);
        struct i3c_dev_desc *i3cdev;

        i3c_bus_for_each_i3cdev(&master->bus, i3cdev) {
                if (i3cdev != refdev && i3cdev->info.pid == refdev->info.pid)
                        return i3cdev;
        }

        return NULL;
}

/**
 * i3c_master_add_i3c_dev_locked() - add an I3C slave to the bus
 * @master: master used to send frames on the bus
 * @addr: I3C slave dynamic address assigned to the device
 *
 * This function is instantiating an I3C device object and adding it to the
 * I3C device list. All device information are automatically retrieved using
 * standard CCC commands.
 *
 * The I3C device object is returned in case the master wants to attach
 * private data to it using i3c_dev_set_master_data().
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: a 0 in case of success, an negative error code otherwise.
 */
int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
                                  u8 addr)
{
        struct i3c_device_info info = { .dyn_addr = addr };
        struct i3c_dev_desc *newdev, *olddev;
        u8 old_dyn_addr = addr, expected_dyn_addr;
        struct i3c_ibi_setup ibireq = { };
        bool enable_ibi = false;
        int ret;

        if (!master)
                return -EINVAL;

        newdev = i3c_master_alloc_i3c_dev(master, &info);
        if (IS_ERR(newdev))
                return PTR_ERR(newdev);

        ret = i3c_master_attach_i3c_dev(master, newdev);
        if (ret)
                goto err_free_dev;

        ret = i3c_master_retrieve_dev_info(newdev);
        if (ret)
                goto err_detach_dev;

        i3c_master_attach_boardinfo(newdev);

        olddev = i3c_master_search_i3c_dev_duplicate(newdev);
        if (olddev) {
                newdev->dev = olddev->dev;
                if (newdev->dev)
                        newdev->dev->desc = newdev;

                /*
                 * We need to restore the IBI state too, so let's save the
                 * IBI information and try to restore them after olddev has
                 * been detached+released and its IBI has been stopped and
                 * the associated resources have been freed.
                 */
                mutex_lock(&olddev->ibi_lock);
                if (olddev->ibi) {
                        ibireq.handler = olddev->ibi->handler;
                        ibireq.max_payload_len = olddev->ibi->max_payload_len;
                        ibireq.num_slots = olddev->ibi->num_slots;

                        if (olddev->ibi->enabled) {
                                enable_ibi = true;
                                i3c_dev_disable_ibi_locked(olddev);
                        }

                        i3c_dev_free_ibi_locked(olddev);
                }
                mutex_unlock(&olddev->ibi_lock);

                old_dyn_addr = olddev->info.dyn_addr;

                i3c_master_detach_i3c_dev(olddev);
                i3c_master_free_i3c_dev(olddev);
        }

        /*
         * Depending on our previous state, the expected dynamic address might
         * differ:
         * - if the device already had a dynamic address assigned, let's try to
         *   re-apply this one
         * - if the device did not have a dynamic address and the firmware
         *   requested a specific address, pick this one
         * - in any other case, keep the address automatically assigned by the
         *   master
         */
        if (old_dyn_addr && old_dyn_addr != newdev->info.dyn_addr)
                expected_dyn_addr = old_dyn_addr;
        else if (newdev->boardinfo && newdev->boardinfo->init_dyn_addr)
                expected_dyn_addr = newdev->boardinfo->init_dyn_addr;
        else
                expected_dyn_addr = newdev->info.dyn_addr;

        if (newdev->info.dyn_addr != expected_dyn_addr) {
                /*
                 * Try to apply the expected dynamic address. If it fails, keep
                 * the address assigned by the master.
                 */
                ret = i3c_master_setnewda_locked(master,
                                                 newdev->info.dyn_addr,
                                                 expected_dyn_addr);
                if (!ret) {
                        old_dyn_addr = newdev->info.dyn_addr;
                        newdev->info.dyn_addr = expected_dyn_addr;
                        i3c_master_reattach_i3c_dev(newdev, old_dyn_addr);
                } else {
                        dev_err(&master->dev,
                                "Failed to assign reserved/old address to device %d%llx",
                                master->bus.id, newdev->info.pid);
                }
        }

        /*
         * Now is time to try to restore the IBI setup. If we're lucky,
         * everything works as before, otherwise, all we can do is complain.
         * FIXME: maybe we should add callback to inform the driver that it
         * should request the IBI again instead of trying to hide that from
         * him.
         */
        if (ibireq.handler) {
                mutex_lock(&newdev->ibi_lock);
                ret = i3c_dev_request_ibi_locked(newdev, &ibireq);
                if (ret) {
                        dev_err(&master->dev,
                                "Failed to request IBI on device %d-%llx",
                                master->bus.id, newdev->info.pid);
                } else if (enable_ibi) {
                        ret = i3c_dev_enable_ibi_locked(newdev);
                        if (ret)
                                dev_err(&master->dev,
                                        "Failed to re-enable IBI on device %d-%llx",
                                        master->bus.id, newdev->info.pid);
                }
                mutex_unlock(&newdev->ibi_lock);
        }

        return 0;

err_detach_dev:
        if (newdev->dev && newdev->dev->desc)
                newdev->dev->desc = NULL;

        i3c_master_detach_i3c_dev(newdev);

err_free_dev:
        i3c_master_free_i3c_dev(newdev);

        return ret;
}
EXPORT_SYMBOL_GPL(i3c_master_add_i3c_dev_locked);

#define OF_I3C_REG1_IS_I2C_DEV                  BIT(31)

static int
of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
                                struct device_node *node, u32 *reg)
{
        struct i2c_dev_boardinfo *boardinfo;
        struct device *dev = &master->dev;
        int ret;

        boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL);
        if (!boardinfo)
                return -ENOMEM;

        ret = of_i2c_get_board_info(dev, node, &boardinfo->base);
        if (ret)
                return ret;

        /*
         * The I3C Specification does not clearly say I2C devices with 10-bit
         * address are supported. These devices can't be passed properly through
         * DEFSLVS command.
         */
        if (boardinfo->base.flags & I2C_CLIENT_TEN) {
                dev_err(dev, "I2C device with 10 bit address not supported.");
                return -ENOTSUPP;
        }

        /* LVR is encoded in reg[2]. */
        boardinfo->lvr = reg[2];

        list_add_tail(&boardinfo->node, &master->boardinfo.i2c);
        of_node_get(node);

        return 0;
}

static int
of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
                                struct device_node *node, u32 *reg)
{
        struct i3c_dev_boardinfo *boardinfo;
        struct device *dev = &master->dev;
        enum i3c_addr_slot_status addrstatus;
        u32 init_dyn_addr = 0;

        boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL);
        if (!boardinfo)
                return -ENOMEM;

        if (reg[0]) {
                if (reg[0] > I3C_MAX_ADDR)
                        return -EINVAL;

                addrstatus = i3c_bus_get_addr_slot_status(&master->bus,
                                                          reg[0]);
                if (addrstatus != I3C_ADDR_SLOT_FREE)
                        return -EINVAL;
        }

        boardinfo->static_addr = reg[0];

        if (!of_property_read_u32(node, "assigned-address", &init_dyn_addr)) {
                if (init_dyn_addr > I3C_MAX_ADDR)
                        return -EINVAL;

                addrstatus = i3c_bus_get_addr_slot_status(&master->bus,
                                                          init_dyn_addr);
                if (addrstatus != I3C_ADDR_SLOT_FREE)
                        return -EINVAL;
        }

        boardinfo->pid = ((u64)reg[1] << 32) | reg[2];

        if ((boardinfo->pid & GENMASK_ULL(63, 48)) ||
            I3C_PID_RND_LOWER_32BITS(boardinfo->pid))
                return -EINVAL;

        boardinfo->init_dyn_addr = init_dyn_addr;
        boardinfo->of_node = of_node_get(node);
        list_add_tail(&boardinfo->node, &master->boardinfo.i3c);

        return 0;
}

static int of_i3c_master_add_dev(struct i3c_master_controller *master,
                                 struct device_node *node)
{
        u32 reg[3];
        int ret;

        if (!master || !node)
                return -EINVAL;

        ret = of_property_read_u32_array(node, "reg", reg, ARRAY_SIZE(reg));
        if (ret)
                return ret;

        /*
         * The manufacturer ID can't be 0. If reg[1] == 0 that means we're
         * dealing with an I2C device.
         */
        if (!reg[1])
                ret = of_i3c_master_add_i2c_boardinfo(master, node, reg);
        else
                ret = of_i3c_master_add_i3c_boardinfo(master, node, reg);

        return ret;
}

static int of_populate_i3c_bus(struct i3c_master_controller *master)
{
        struct device *dev = &master->dev;
        struct device_node *i3cbus_np = dev->of_node;
        struct device_node *node;
        int ret;
        u32 val;

        if (!i3cbus_np)
                return 0;

        for_each_available_child_of_node(i3cbus_np, node) {
                ret = of_i3c_master_add_dev(master, node);
                if (ret) {
                        of_node_put(node);
                        return ret;
                }
        }

        /*
         * The user might want to limit I2C and I3C speed in case some devices
         * on the bus are not supporting typical rates, or if the bus topology
         * prevents it from using max possible rate.
         */
        if (!of_property_read_u32(i3cbus_np, "i2c-scl-hz", &val))
                master->bus.scl_rate.i2c = val;

        if (!of_property_read_u32(i3cbus_np, "i3c-scl-hz", &val))
                master->bus.scl_rate.i3c = val;

        return 0;
}

static int i3c_master_i2c_adapter_xfer(struct i2c_adapter *adap,
                                       struct i2c_msg *xfers, int nxfers)
{
        struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap);
        struct i2c_dev_desc *dev;
        int i, ret;
        u16 addr;

        if (!xfers || !master || nxfers <= 0)
                return -EINVAL;

        if (!master->ops->i2c_xfers)
                return -ENOTSUPP;

        /* Doing transfers to different devices is not supported. */
        addr = xfers[0].addr;
        for (i = 1; i < nxfers; i++) {
                if (addr != xfers[i].addr)
                        return -ENOTSUPP;
        }

        i3c_bus_normaluse_lock(&master->bus);
        dev = i3c_master_find_i2c_dev_by_addr(master, addr);
        if (!dev)
                ret = -ENOENT;
        else
                ret = master->ops->i2c_xfers(dev, xfers, nxfers);
        i3c_bus_normaluse_unlock(&master->bus);

        return ret ? ret : nxfers;
}

static u32 i3c_master_i2c_funcs(struct i2c_adapter *adapter)
{
        return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
}

static u8 i3c_master_i2c_get_lvr(struct i2c_client *client)
{
        /* Fall back to no spike filters and FM bus mode. */
        u8 lvr = I3C_LVR_I2C_INDEX(2) | I3C_LVR_I2C_FM_MODE;

        if (client->dev.of_node) {
                u32 reg[3];

                if (!of_property_read_u32_array(client->dev.of_node, "reg",
                                                reg, ARRAY_SIZE(reg)))
                        lvr = reg[2];
        }

        return lvr;
}

static int i3c_master_i2c_attach(struct i2c_adapter *adap, struct i2c_client *client)
{
        struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap);
        enum i3c_addr_slot_status status;
        struct i2c_dev_desc *i2cdev;
        int ret;

        /* Already added by board info? */
        if (i3c_master_find_i2c_dev_by_addr(master, client->addr))
                return 0;

        status = i3c_bus_get_addr_slot_status(&master->bus, client->addr);
        if (status != I3C_ADDR_SLOT_FREE)
                return -EBUSY;

        i3c_bus_set_addr_slot_status(&master->bus, client->addr,
                                     I3C_ADDR_SLOT_I2C_DEV);

        i2cdev = i3c_master_alloc_i2c_dev(master, client->addr,
                                          i3c_master_i2c_get_lvr(client));
        if (IS_ERR(i2cdev)) {
                ret = PTR_ERR(i2cdev);
                goto out_clear_status;
        }

        ret = i3c_master_attach_i2c_dev(master, i2cdev);
        if (ret)
                goto out_free_dev;

        return 0;

out_free_dev:
        i3c_master_free_i2c_dev(i2cdev);
out_clear_status:
        i3c_bus_set_addr_slot_status(&master->bus, client->addr,
                                     I3C_ADDR_SLOT_FREE);

        return ret;
}

static int i3c_master_i2c_detach(struct i2c_adapter *adap, struct i2c_client *client)
{
        struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap);
        struct i2c_dev_desc *dev;

        dev = i3c_master_find_i2c_dev_by_addr(master, client->addr);
        if (!dev)
                return -ENODEV;

        i3c_master_detach_i2c_dev(dev);
        i3c_bus_set_addr_slot_status(&master->bus, dev->addr,
                                     I3C_ADDR_SLOT_FREE);
        i3c_master_free_i2c_dev(dev);

        return 0;
}

static const struct i2c_algorithm i3c_master_i2c_algo = {
        .master_xfer = i3c_master_i2c_adapter_xfer,
        .functionality = i3c_master_i2c_funcs,
};

static int i3c_i2c_notifier_call(struct notifier_block *nb, unsigned long action,
                                 void *data)
{
        struct i2c_adapter *adap;
        struct i2c_client *client;
        struct device *dev = data;
        struct i3c_master_controller *master;
        int ret;

        if (dev->type != &i2c_client_type)
                return 0;

        client = to_i2c_client(dev);
        adap = client->adapter;

        if (adap->algo != &i3c_master_i2c_algo)
                return 0;

        master = i2c_adapter_to_i3c_master(adap);

        i3c_bus_maintenance_lock(&master->bus);
        switch (action) {
        case BUS_NOTIFY_ADD_DEVICE:
                ret = i3c_master_i2c_attach(adap, client);
                break;
        case BUS_NOTIFY_DEL_DEVICE:
                ret = i3c_master_i2c_detach(adap, client);
                break;
        }
        i3c_bus_maintenance_unlock(&master->bus);

        return ret;
}

static struct notifier_block i2cdev_notifier = {
        .notifier_call = i3c_i2c_notifier_call,
};

static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master)
{
        struct i2c_adapter *adap = i3c_master_to_i2c_adapter(master);
        struct i2c_dev_desc *i2cdev;
        struct i2c_dev_boardinfo *i2cboardinfo;
        int ret;

        adap->dev.parent = master->dev.parent;
        adap->owner = master->dev.parent->driver->owner;
        adap->algo = &i3c_master_i2c_algo;
        strncpy(adap->name, dev_name(master->dev.parent), sizeof(adap->name));

        /* FIXME: Should we allow i3c masters to override these values? */
        adap->timeout = 1000;
        adap->retries = 3;

        ret = i2c_add_adapter(adap);
        if (ret)
                return ret;

        /*
         * We silently ignore failures here. The bus should keep working
         * correctly even if one or more i2c devices are not registered.
         */
        list_for_each_entry(i2cboardinfo, &master->boardinfo.i2c, node) {
                i2cdev = i3c_master_find_i2c_dev_by_addr(master,
                                                         i2cboardinfo->base.addr);
                if (WARN_ON(!i2cdev))
                        continue;
                i2cdev->dev = i2c_new_client_device(adap, &i2cboardinfo->base);
        }

        return 0;
}

static void i3c_master_i2c_adapter_cleanup(struct i3c_master_controller *master)
{
        struct i2c_dev_desc *i2cdev;

        i2c_del_adapter(&master->i2c);

        i3c_bus_for_each_i2cdev(&master->bus, i2cdev)
                i2cdev->dev = NULL;
}

static void i3c_master_unregister_i3c_devs(struct i3c_master_controller *master)
{
        struct i3c_dev_desc *i3cdev;

        i3c_bus_for_each_i3cdev(&master->bus, i3cdev) {
                if (!i3cdev->dev)
                        continue;

                i3cdev->dev->desc = NULL;
                if (device_is_registered(&i3cdev->dev->dev))
                        device_unregister(&i3cdev->dev->dev);
                else
                        put_device(&i3cdev->dev->dev);
                i3cdev->dev = NULL;
        }
}

/**
 * i3c_master_queue_ibi() - Queue an IBI
 * @dev: the device this IBI is coming from
 * @slot: the IBI slot used to store the payload
 *
 * Queue an IBI to the controller workqueue. The IBI handler attached to
 * the dev will be called from a workqueue context.
 */
void i3c_master_queue_ibi(struct i3c_dev_desc *dev, struct i3c_ibi_slot *slot)
{
        atomic_inc(&dev->ibi->pending_ibis);
        queue_work(dev->common.master->wq, &slot->work);
}
EXPORT_SYMBOL_GPL(i3c_master_queue_ibi);

static void i3c_master_handle_ibi(struct work_struct *work)
{
        struct i3c_ibi_slot *slot = container_of(work, struct i3c_ibi_slot,
                                                 work);
        struct i3c_dev_desc *dev = slot->dev;
        struct i3c_master_controller *master = i3c_dev_get_master(dev);
        struct i3c_ibi_payload payload;

        payload.data = slot->data;
        payload.len = slot->len;

        if (dev->dev)
                dev->ibi->handler(dev->dev, &payload);

        master->ops->recycle_ibi_slot(dev, slot);
        if (atomic_dec_and_test(&dev->ibi->pending_ibis))
                complete(&dev->ibi->all_ibis_handled);
}

static void i3c_master_init_ibi_slot(struct i3c_dev_desc *dev,
                                     struct i3c_ibi_slot *slot)
{
        slot->dev = dev;
        INIT_WORK(&slot->work, i3c_master_handle_ibi);
}

struct i3c_generic_ibi_slot {
        struct list_head node;
        struct i3c_ibi_slot base;
};

struct i3c_generic_ibi_pool {
        spinlock_t lock;
        unsigned int num_slots;
        struct i3c_generic_ibi_slot *slots;
        void *payload_buf;
        struct list_head free_slots;
        struct list_head pending;
};

/**
 * i3c_generic_ibi_free_pool() - Free a generic IBI pool
 * @pool: the IBI pool to free
 *
 * Free all IBI slots allated by a generic IBI pool.
 */
void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool)
{
        struct i3c_generic_ibi_slot *slot;
        unsigned int nslots = 0;

        while (!list_empty(&pool->free_slots)) {
                slot = list_first_entry(&pool->free_slots,
                                        struct i3c_generic_ibi_slot, node);
                list_del(&slot->node);
                nslots++;
        }

        /*
         * If the number of freed slots is not equal to the number of allocated
         * slots we have a leak somewhere.
         */
        WARN_ON(nslots != pool->num_slots);

        kfree(pool->payload_buf);
        kfree(pool->slots);
        kfree(pool);
}
EXPORT_SYMBOL_GPL(i3c_generic_ibi_free_pool);

/**
 * i3c_generic_ibi_alloc_pool() - Create a generic IBI pool
 * @dev: the device this pool will be used for
 * @req: IBI setup request describing what the device driver expects
 *
 * Create a generic IBI pool based on the information provided in @req.
 *
 * Return: a valid IBI pool in case of success, an ERR_PTR() otherwise.
 */
struct i3c_generic_ibi_pool *
i3c_generic_ibi_alloc_pool(struct i3c_dev_desc *dev,
                           const struct i3c_ibi_setup *req)
{
        struct i3c_generic_ibi_pool *pool;
        struct i3c_generic_ibi_slot *slot;
        unsigned int i;
        int ret;

        pool = kzalloc(sizeof(*pool), GFP_KERNEL);
        if (!pool)
                return ERR_PTR(-ENOMEM);

        spin_lock_init(&pool->lock);
        INIT_LIST_HEAD(&pool->free_slots);
        INIT_LIST_HEAD(&pool->pending);

        pool->slots = kcalloc(req->num_slots, sizeof(*slot), GFP_KERNEL);
        if (!pool->slots) {
                ret = -ENOMEM;
                goto err_free_pool;
        }

        if (req->max_payload_len) {
                pool->payload_buf = kcalloc(req->num_slots,
                                            req->max_payload_len, GFP_KERNEL);
                if (!pool->payload_buf) {
                        ret = -ENOMEM;
                        goto err_free_pool;
                }
        }

        for (i = 0; i < req->num_slots; i++) {
                slot = &pool->slots[i];
                i3c_master_init_ibi_slot(dev, &slot->base);

                if (req->max_payload_len)
                        slot->base.data = pool->payload_buf +
                                          (i * req->max_payload_len);

                list_add_tail(&slot->node, &pool->free_slots);
                pool->num_slots++;
        }

        return pool;

err_free_pool:
        i3c_generic_ibi_free_pool(pool);
        return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(i3c_generic_ibi_alloc_pool);

/**
 * i3c_generic_ibi_get_free_slot() - Get a free slot from a generic IBI pool
 * @pool: the pool to query an IBI slot on
 *
 * Search for a free slot in a generic IBI pool.
 * The slot should be returned to the pool using i3c_generic_ibi_recycle_slot()
 * when it's no longer needed.
 *
 * Return: a pointer to a free slot, or NULL if there's no free slot available.
 */
struct i3c_ibi_slot *
i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool)
{
        struct i3c_generic_ibi_slot *slot;
        unsigned long flags;

        spin_lock_irqsave(&pool->lock, flags);
        slot = list_first_entry_or_null(&pool->free_slots,
                                        struct i3c_generic_ibi_slot, node);
        if (slot)
                list_del(&slot->node);
        spin_unlock_irqrestore(&pool->lock, flags);

        return slot ? &slot->base : NULL;
}
EXPORT_SYMBOL_GPL(i3c_generic_ibi_get_free_slot);

/**
 * i3c_generic_ibi_recycle_slot() - Return a slot to a generic IBI pool
 * @pool: the pool to return the IBI slot to
 * @s: IBI slot to recycle
 *
 * Add an IBI slot back to its generic IBI pool. Should be called from the
 * master driver struct_master_controller_ops->recycle_ibi() method.
 */
void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool,
                                  struct i3c_ibi_slot *s)
{
        struct i3c_generic_ibi_slot *slot;
        unsigned long flags;

        if (!s)
                return;

        slot = container_of(s, struct i3c_generic_ibi_slot, base);
        spin_lock_irqsave(&pool->lock, flags);
        list_add_tail(&slot->node, &pool->free_slots);
        spin_unlock_irqrestore(&pool->lock, flags);
}
EXPORT_SYMBOL_GPL(i3c_generic_ibi_recycle_slot);

static int i3c_master_check_ops(const struct i3c_master_controller_ops *ops)
{
        if (!ops || !ops->bus_init || !ops->priv_xfers ||
            !ops->send_ccc_cmd || !ops->do_daa || !ops->i2c_xfers)
                return -EINVAL;

        if (ops->request_ibi &&
            (!ops->enable_ibi || !ops->disable_ibi || !ops->free_ibi ||
             !ops->recycle_ibi_slot))
                return -EINVAL;

        return 0;
}

/**
 * i3c_master_register() - register an I3C master
 * @master: master used to send frames on the bus
 * @parent: the parent device (the one that provides this I3C master
 *          controller)
 * @ops: the master controller operations
 * @secondary: true if you are registering a secondary master. Will return
 *             -ENOTSUPP if set to true since secondary masters are not yet
 *             supported
 *
 * This function takes care of everything for you:
 *
 * - creates and initializes the I3C bus
 * - populates the bus with static I2C devs if @parent->of_node is not
 *   NULL
 * - registers all I3C devices added by the controller during bus
 *   initialization
 * - registers the I2C adapter and all I2C devices
 *
 * Return: 0 in case of success, a negative error code otherwise.
 */
int i3c_master_register(struct i3c_master_controller *master,
                        struct device *parent,
                        const struct i3c_master_controller_ops *ops,
                        bool secondary)
{
        unsigned long i2c_scl_rate = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
        struct i3c_bus *i3cbus = i3c_master_get_bus(master);
        enum i3c_bus_mode mode = I3C_BUS_MODE_PURE;
        struct i2c_dev_boardinfo *i2cbi;
        int ret;

        /* We do not support secondary masters yet. */
        if (secondary)
                return -ENOTSUPP;

        ret = i3c_master_check_ops(ops);
        if (ret)
                return ret;

        master->dev.parent = parent;
        master->dev.of_node = of_node_get(parent->of_node);
        master->dev.bus = &i3c_bus_type;
        master->dev.type = &i3c_masterdev_type;
        master->dev.release = i3c_masterdev_release;
        master->ops = ops;
        master->secondary = secondary;
        INIT_LIST_HEAD(&master->boardinfo.i2c);
        INIT_LIST_HEAD(&master->boardinfo.i3c);

        ret = i3c_bus_init(i3cbus, master->dev.of_node);
        if (ret)
                return ret;

        device_initialize(&master->dev);
        dev_set_name(&master->dev, "i3c-%d", i3cbus->id);

        ret = of_populate_i3c_bus(master);
        if (ret)
                goto err_put_dev;

        list_for_each_entry(i2cbi, &master->boardinfo.i2c, node) {
                switch (i2cbi->lvr & I3C_LVR_I2C_INDEX_MASK) {
                case I3C_LVR_I2C_INDEX(0):
                        if (mode < I3C_BUS_MODE_MIXED_FAST)
                                mode = I3C_BUS_MODE_MIXED_FAST;
                        break;
                case I3C_LVR_I2C_INDEX(1):
                        if (mode < I3C_BUS_MODE_MIXED_LIMITED)
                                mode = I3C_BUS_MODE_MIXED_LIMITED;
                        break;
                case I3C_LVR_I2C_INDEX(2):
                        if (mode < I3C_BUS_MODE_MIXED_SLOW)
                                mode = I3C_BUS_MODE_MIXED_SLOW;
                        break;
                default:
                        ret = -EINVAL;
                        goto err_put_dev;
                }

                if (i2cbi->lvr & I3C_LVR_I2C_FM_MODE)
                        i2c_scl_rate = I3C_BUS_I2C_FM_SCL_RATE;
        }

        ret = i3c_bus_set_mode(i3cbus, mode, i2c_scl_rate);
        if (ret)
                goto err_put_dev;

        master->wq = alloc_workqueue("%s", 0, 0, dev_name(parent));
        if (!master->wq) {
                ret = -ENOMEM;
                goto err_put_dev;
        }

        ret = i3c_master_bus_init(master);
        if (ret)
                goto err_put_dev;

        ret = device_add(&master->dev);
        if (ret)
                goto err_cleanup_bus;

        /*
         * Expose our I3C bus as an I2C adapter so that I2C devices are exposed
         * through the I2C subsystem.
         */
        ret = i3c_master_i2c_adapter_init(master);
        if (ret)
                goto err_del_dev;

        /*
         * We're done initializing the bus and the controller, we can now
         * register I3C devices discovered during the initial DAA.
         */
        master->init_done = true;
        i3c_bus_normaluse_lock(&master->bus);
        i3c_master_register_new_i3c_devs(master);
        i3c_bus_normaluse_unlock(&master->bus);

        return 0;

err_del_dev:
        device_del(&master->dev);

err_cleanup_bus:
        i3c_master_bus_cleanup(master);

err_put_dev:
        put_device(&master->dev);

        return ret;
}
EXPORT_SYMBOL_GPL(i3c_master_register);

/**
 * i3c_master_unregister() - unregister an I3C master
 * @master: master used to send frames on the bus
 *
 * Basically undo everything done in i3c_master_register().
 */
void i3c_master_unregister(struct i3c_master_controller *master)
{
        i3c_master_i2c_adapter_cleanup(master);
        i3c_master_unregister_i3c_devs(master);
        i3c_master_bus_cleanup(master);
        device_unregister(&master->dev);
}
EXPORT_SYMBOL_GPL(i3c_master_unregister);

int i3c_dev_setdasa_locked(struct i3c_dev_desc *dev)
{
        struct i3c_master_controller *master;

        if (!dev)
                return -ENOENT;

        master = i3c_dev_get_master(dev);
        if (!master)
                return -EINVAL;

        if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
                !dev->boardinfo->static_addr)
                return -EINVAL;

        return i3c_master_setdasa_locked(master, dev->info.static_addr,
                                                dev->boardinfo->init_dyn_addr);
}

int i3c_dev_do_priv_xfers_locked(struct i3c_dev_desc *dev,
                                 struct i3c_priv_xfer *xfers,
                                 int nxfers)
{
        struct i3c_master_controller *master;

        if (!dev)
                return -ENOENT;

        master = i3c_dev_get_master(dev);
        if (!master || !xfers)
                return -EINVAL;

        if (!master->ops->priv_xfers)
                return -ENOTSUPP;

        return master->ops->priv_xfers(dev, xfers, nxfers);
}

int i3c_dev_disable_ibi_locked(struct i3c_dev_desc *dev)
{
        struct i3c_master_controller *master;
        int ret;

        if (!dev->ibi)
                return -EINVAL;

        master = i3c_dev_get_master(dev);
        ret = master->ops->disable_ibi(dev);
        if (ret)
                return ret;

        reinit_completion(&dev->ibi->all_ibis_handled);
        if (atomic_read(&dev->ibi->pending_ibis))
                wait_for_completion(&dev->ibi->all_ibis_handled);

        dev->ibi->enabled = false;

        return 0;
}

int i3c_dev_enable_ibi_locked(struct i3c_dev_desc *dev)
{
        struct i3c_master_controller *master = i3c_dev_get_master(dev);
        int ret;

        if (!dev->ibi)
                return -EINVAL;

        ret = master->ops->enable_ibi(dev);
        if (!ret)
                dev->ibi->enabled = true;

        return ret;
}

int i3c_dev_request_ibi_locked(struct i3c_dev_desc *dev,
                               const struct i3c_ibi_setup *req)
{
        struct i3c_master_controller *master = i3c_dev_get_master(dev);
        struct i3c_device_ibi_info *ibi;
        int ret;

        if (!master->ops->request_ibi)
                return -ENOTSUPP;

        if (dev->ibi)
                return -EBUSY;

        ibi = kzalloc(sizeof(*ibi), GFP_KERNEL);
        if (!ibi)
                return -ENOMEM;

        atomic_set(&ibi->pending_ibis, 0);
        init_completion(&ibi->all_ibis_handled);
        ibi->handler = req->handler;
        ibi->max_payload_len = req->max_payload_len;
        ibi->num_slots = req->num_slots;

        dev->ibi = ibi;
        ret = master->ops->request_ibi(dev, req);
        if (ret) {
                kfree(ibi);
                dev->ibi = NULL;
        }

        return ret;
}

void i3c_dev_free_ibi_locked(struct i3c_dev_desc *dev)
{
        struct i3c_master_controller *master = i3c_dev_get_master(dev);

        if (!dev->ibi)
                return;

        if (WARN_ON(dev->ibi->enabled))
                WARN_ON(i3c_dev_disable_ibi_locked(dev));

        master->ops->free_ibi(dev);
        kfree(dev->ibi);
        dev->ibi = NULL;
}

static int __init i3c_init(void)
{
        int res;

        res = of_alias_get_highest_id("i3c");
        if (res >= 0) {
                mutex_lock(&i3c_core_lock);
                __i3c_first_dynamic_bus_num = res + 1;
                mutex_unlock(&i3c_core_lock);
        }

        res = bus_register_notifier(&i2c_bus_type, &i2cdev_notifier);
        if (res)
                return res;

        res = bus_register(&i3c_bus_type);
        if (res)
                goto out_unreg_notifier;

        return 0;

out_unreg_notifier:
        bus_unregister_notifier(&i2c_bus_type, &i2cdev_notifier);

        return res;
}
subsys_initcall(i3c_init);

static void __exit i3c_exit(void)
{
        bus_unregister_notifier(&i2c_bus_type, &i2cdev_notifier);
        idr_destroy(&i3c_bus_idr);
        bus_unregister(&i3c_bus_type);
}
module_exit(i3c_exit);

MODULE_AUTHOR("Boris Brezillon <boris.brezillon@bootlin.com>");
MODULE_DESCRIPTION("I3C core");
MODULE_LICENSE("GPL v2");