drivers/input/touchscreen/silead.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /* -------------------------------------------------------------------------
   3  * Copyright (C) 2014-2015, Intel Corporation
   4  *
   5  * Derived from:
   6  *  gslX68X.c
   7  *  Copyright (C) 2010-2015, Shanghai Sileadinc Co.Ltd
   8  *
   9  * -------------------------------------------------------------------------
  10  */
  11
  12 #include <linux/i2c.h>
  13 #include <linux/module.h>
  14 #include <linux/acpi.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/gpio/consumer.h>
  17 #include <linux/delay.h>
  18 #include <linux/firmware.h>
  19 #include <linux/input.h>
  20 #include <linux/input/mt.h>
  21 #include <linux/input/touchscreen.h>
  22 #include <linux/pm.h>
  23 #include <linux/pm_runtime.h>
  24 #include <linux/irq.h>
  25 #include <linux/regulator/consumer.h>
  26
  27 #include <asm/unaligned.h>
  28
  29 #define SILEAD_TS_NAME          "silead_ts"
  30
  31 #define SILEAD_REG_RESET        0xE0
  32 #define SILEAD_REG_DATA         0x80
  33 #define SILEAD_REG_TOUCH_NR     0x80
  34 #define SILEAD_REG_POWER        0xBC
  35 #define SILEAD_REG_CLOCK        0xE4
  36 #define SILEAD_REG_STATUS       0xB0
  37 #define SILEAD_REG_ID           0xFC
  38 #define SILEAD_REG_MEM_CHECK    0xB0
  39
  40 #define SILEAD_STATUS_OK        0x5A5A5A5A
  41 #define SILEAD_TS_DATA_LEN      44
  42 #define SILEAD_CLOCK            0x04
  43
  44 #define SILEAD_CMD_RESET        0x88
  45 #define SILEAD_CMD_START        0x00
  46
  47 #define SILEAD_POINT_DATA_LEN   0x04
  48 #define SILEAD_POINT_Y_OFF      0x00
  49 #define SILEAD_POINT_Y_MSB_OFF  0x01
  50 #define SILEAD_POINT_X_OFF      0x02
  51 #define SILEAD_POINT_X_MSB_OFF  0x03
  52 #define SILEAD_EXTRA_DATA_MASK  0xF0
  53
  54 #define SILEAD_CMD_SLEEP_MIN    10000
  55 #define SILEAD_CMD_SLEEP_MAX    20000
  56 #define SILEAD_POWER_SLEEP      20
  57 #define SILEAD_STARTUP_SLEEP    30
  58
  59 #define SILEAD_MAX_FINGERS      10
  60
  61 enum silead_ts_power {
  62         SILEAD_POWER_ON  = 1,
  63         SILEAD_POWER_OFF = 0
  64 };
  65
  66 struct silead_ts_data {
  67         struct i2c_client *client;
  68         struct gpio_desc *gpio_power;
  69         struct input_dev *input;
  70         struct input_dev *pen_input;
  71         struct regulator_bulk_data regulators[2];
  72         char fw_name[64];
  73         struct touchscreen_properties prop;
  74         u32 max_fingers;
  75         u32 chip_id;
  76         struct input_mt_pos pos[SILEAD_MAX_FINGERS];
  77         int slots[SILEAD_MAX_FINGERS];
  78         int id[SILEAD_MAX_FINGERS];
  79         u32 efi_fw_min_max[4];
  80         bool efi_fw_min_max_set;
  81         bool pen_supported;
  82         bool pen_down;
  83         u32 pen_x_res;
  84         u32 pen_y_res;
  85         int pen_up_count;
  86 };
  87
  88 struct silead_fw_data {
  89         u32 offset;
  90         u32 val;
  91 };
  92
  93 static void silead_apply_efi_fw_min_max(struct silead_ts_data *data)
  94 {
  95         struct input_absinfo *absinfo_x = &data->input->absinfo[ABS_MT_POSITION_X];
  96         struct input_absinfo *absinfo_y = &data->input->absinfo[ABS_MT_POSITION_Y];
  97
  98         if (!data->efi_fw_min_max_set)
  99                 return;
 100
 101         absinfo_x->minimum = data->efi_fw_min_max[0];
 102         absinfo_x->maximum = data->efi_fw_min_max[1];
 103         absinfo_y->minimum = data->efi_fw_min_max[2];
 104         absinfo_y->maximum = data->efi_fw_min_max[3];
 105
 106         if (data->prop.invert_x) {
 107                 absinfo_x->maximum -= absinfo_x->minimum;
 108                 absinfo_x->minimum = 0;
 109         }
 110
 111         if (data->prop.invert_y) {
 112                 absinfo_y->maximum -= absinfo_y->minimum;
 113                 absinfo_y->minimum = 0;
 114         }
 115
 116         if (data->prop.swap_x_y) {
 117                 swap(absinfo_x->minimum, absinfo_y->minimum);
 118                 swap(absinfo_x->maximum, absinfo_y->maximum);
 119         }
 120 }
 121
 122 static int silead_ts_request_input_dev(struct silead_ts_data *data)
 123 {
 124         struct device *dev = &data->client->dev;
 125         int error;
 126
 127         data->input = devm_input_allocate_device(dev);
 128         if (!data->input) {
 129                 dev_err(dev,
 130                         "Failed to allocate input device\n");
 131                 return -ENOMEM;
 132         }
 133
 134         input_set_abs_params(data->input, ABS_MT_POSITION_X, 0, 4095, 0, 0);
 135         input_set_abs_params(data->input, ABS_MT_POSITION_Y, 0, 4095, 0, 0);
 136         touchscreen_parse_properties(data->input, true, &data->prop);
 137         silead_apply_efi_fw_min_max(data);
 138
 139         input_mt_init_slots(data->input, data->max_fingers,
 140                             INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED |
 141                             INPUT_MT_TRACK);
 142
 143         if (device_property_read_bool(dev, "silead,home-button"))
 144                 input_set_capability(data->input, EV_KEY, KEY_LEFTMETA);
 145
 146         data->input->name = SILEAD_TS_NAME;
 147         data->input->phys = "input/ts";
 148         data->input->id.bustype = BUS_I2C;
 149
 150         error = input_register_device(data->input);
 151         if (error) {
 152                 dev_err(dev, "Failed to register input device: %d\n", error);
 153                         return error;
 154         }
 155
 156         return 0;
 157 }
 158
 159 static int silead_ts_request_pen_input_dev(struct silead_ts_data *data)
 160 {
 161         struct device *dev = &data->client->dev;
 162         int error;
 163
 164         if (!data->pen_supported)
 165                 return 0;
 166
 167         data->pen_input = devm_input_allocate_device(dev);
 168         if (!data->pen_input)
 169                 return -ENOMEM;
 170
 171         input_set_abs_params(data->pen_input, ABS_X, 0, 4095, 0, 0);
 172         input_set_abs_params(data->pen_input, ABS_Y, 0, 4095, 0, 0);
 173         input_set_capability(data->pen_input, EV_KEY, BTN_TOUCH);
 174         input_set_capability(data->pen_input, EV_KEY, BTN_TOOL_PEN);
 175         set_bit(INPUT_PROP_DIRECT, data->pen_input->propbit);
 176         touchscreen_parse_properties(data->pen_input, false, &data->prop);
 177         input_abs_set_res(data->pen_input, ABS_X, data->pen_x_res);
 178         input_abs_set_res(data->pen_input, ABS_Y, data->pen_y_res);
 179
 180         data->pen_input->name = SILEAD_TS_NAME " pen";
 181         data->pen_input->phys = "input/pen";
 182         data->input->id.bustype = BUS_I2C;
 183
 184         error = input_register_device(data->pen_input);
 185         if (error) {
 186                 dev_err(dev, "Failed to register pen input device: %d\n", error);
 187                 return error;
 188         }
 189
 190         return 0;
 191 }
 192
 193 static void silead_ts_set_power(struct i2c_client *client,
 194                                 enum silead_ts_power state)
 195 {
 196         struct silead_ts_data *data = i2c_get_clientdata(client);
 197
 198         if (data->gpio_power) {
 199                 gpiod_set_value_cansleep(data->gpio_power, state);
 200                 msleep(SILEAD_POWER_SLEEP);
 201         }
 202 }
 203
 204 static bool silead_ts_handle_pen_data(struct silead_ts_data *data, u8 *buf)
 205 {
 206         u8 *coord = buf + SILEAD_POINT_DATA_LEN;
 207         struct input_mt_pos pos;
 208
 209         if (!data->pen_supported || buf[2] != 0x00 || buf[3] != 0x00)
 210                 return false;
 211
 212         if (buf[0] == 0x00 && buf[1] == 0x00 && data->pen_down) {
 213                 data->pen_up_count++;
 214                 if (data->pen_up_count == 6) {
 215                         data->pen_down = false;
 216                         goto sync;
 217                 }
 218                 return true;
 219         }
 220
 221         if (buf[0] == 0x01 && buf[1] == 0x08) {
 222                 touchscreen_set_mt_pos(&pos, &data->prop,
 223                         get_unaligned_le16(&coord[SILEAD_POINT_X_OFF]) & 0xfff,
 224                         get_unaligned_le16(&coord[SILEAD_POINT_Y_OFF]) & 0xfff);
 225
 226                 input_report_abs(data->pen_input, ABS_X, pos.x);
 227                 input_report_abs(data->pen_input, ABS_Y, pos.y);
 228
 229                 data->pen_up_count = 0;
 230                 data->pen_down = true;
 231                 goto sync;
 232         }
 233
 234         return false;
 235
 236 sync:
 237         input_report_key(data->pen_input, BTN_TOOL_PEN, data->pen_down);
 238         input_report_key(data->pen_input, BTN_TOUCH, data->pen_down);
 239         input_sync(data->pen_input);
 240         return true;
 241 }
 242
 243 static void silead_ts_read_data(struct i2c_client *client)
 244 {
 245         struct silead_ts_data *data = i2c_get_clientdata(client);
 246         struct input_dev *input = data->input;
 247         struct device *dev = &client->dev;
 248         u8 *bufp, buf[SILEAD_TS_DATA_LEN];
 249         int touch_nr, softbutton, error, i;
 250         bool softbutton_pressed = false;
 251
 252         error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_DATA,
 253                                               SILEAD_TS_DATA_LEN, buf);
 254         if (error < 0) {
 255                 dev_err(dev, "Data read error %d\n", error);
 256                 return;
 257         }
 258
 259         if (buf[0] > data->max_fingers) {
 260                 dev_warn(dev, "More touches reported then supported %d > %d\n",
 261                          buf[0], data->max_fingers);
 262                 buf[0] = data->max_fingers;
 263         }
 264
 265         if (silead_ts_handle_pen_data(data, buf))
 266                 goto sync; /* Pen is down, release all previous touches */
 267
 268         touch_nr = 0;
 269         bufp = buf + SILEAD_POINT_DATA_LEN;
 270         for (i = 0; i < buf[0]; i++, bufp += SILEAD_POINT_DATA_LEN) {
 271                 softbutton = (bufp[SILEAD_POINT_Y_MSB_OFF] &
 272                               SILEAD_EXTRA_DATA_MASK) >> 4;
 273
 274                 if (softbutton) {
 275                         /*
 276                          * For now only respond to softbutton == 0x01, some
 277                          * tablets *without* a capacative button send 0x04
 278                          * when crossing the edges of the screen.
 279                          */
 280                         if (softbutton == 0x01)
 281                                 softbutton_pressed = true;
 282
 283                         continue;
 284                 }
 285
 286                 /*
 287                  * Bits 4-7 are the touch id, note not all models have
 288                  * hardware touch ids so atm we don't use these.
 289                  */
 290                 data->id[touch_nr] = (bufp[SILEAD_POINT_X_MSB_OFF] &
 291                                       SILEAD_EXTRA_DATA_MASK) >> 4;
 292                 touchscreen_set_mt_pos(&data->pos[touch_nr], &data->prop,
 293                         get_unaligned_le16(&bufp[SILEAD_POINT_X_OFF]) & 0xfff,
 294                         get_unaligned_le16(&bufp[SILEAD_POINT_Y_OFF]) & 0xfff);
 295                 touch_nr++;
 296         }
 297
 298         input_mt_assign_slots(input, data->slots, data->pos, touch_nr, 0);
 299
 300         for (i = 0; i < touch_nr; i++) {
 301                 input_mt_slot(input, data->slots[i]);
 302                 input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
 303                 input_report_abs(input, ABS_MT_POSITION_X, data->pos[i].x);
 304                 input_report_abs(input, ABS_MT_POSITION_Y, data->pos[i].y);
 305
 306                 dev_dbg(dev, "x=%d y=%d hw_id=%d sw_id=%d\n", data->pos[i].x,
 307                         data->pos[i].y, data->id[i], data->slots[i]);
 308         }
 309
 310 sync:
 311         input_mt_sync_frame(input);
 312         input_report_key(input, KEY_LEFTMETA, softbutton_pressed);
 313         input_sync(input);
 314 }
 315
 316 static int silead_ts_init(struct i2c_client *client)
 317 {
 318         struct silead_ts_data *data = i2c_get_clientdata(client);
 319         int error;
 320
 321         error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET,
 322                                           SILEAD_CMD_RESET);
 323         if (error)
 324                 goto i2c_write_err;
 325         usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
 326
 327         error = i2c_smbus_write_byte_data(client, SILEAD_REG_TOUCH_NR,
 328                                         data->max_fingers);
 329         if (error)
 330                 goto i2c_write_err;
 331         usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
 332
 333         error = i2c_smbus_write_byte_data(client, SILEAD_REG_CLOCK,
 334                                           SILEAD_CLOCK);
 335         if (error)
 336                 goto i2c_write_err;
 337         usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
 338
 339         error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET,
 340                                           SILEAD_CMD_START);
 341         if (error)
 342                 goto i2c_write_err;
 343         usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
 344
 345         return 0;
 346
 347 i2c_write_err:
 348         dev_err(&client->dev, "Registers clear error %d\n", error);
 349         return error;
 350 }
 351
 352 static int silead_ts_reset(struct i2c_client *client)
 353 {
 354         int error;
 355
 356         error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET,
 357                                           SILEAD_CMD_RESET);
 358         if (error)
 359                 goto i2c_write_err;
 360         usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
 361
 362         error = i2c_smbus_write_byte_data(client, SILEAD_REG_CLOCK,
 363                                           SILEAD_CLOCK);
 364         if (error)
 365                 goto i2c_write_err;
 366         usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
 367
 368         error = i2c_smbus_write_byte_data(client, SILEAD_REG_POWER,
 369                                           SILEAD_CMD_START);
 370         if (error)
 371                 goto i2c_write_err;
 372         usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
 373
 374         return 0;
 375
 376 i2c_write_err:
 377         dev_err(&client->dev, "Chip reset error %d\n", error);
 378         return error;
 379 }
 380
 381 static int silead_ts_startup(struct i2c_client *client)
 382 {
 383         int error;
 384
 385         error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, 0x00);
 386         if (error) {
 387                 dev_err(&client->dev, "Startup error %d\n", error);
 388                 return error;
 389         }
 390
 391         msleep(SILEAD_STARTUP_SLEEP);
 392
 393         return 0;
 394 }
 395
 396 static int silead_ts_load_fw(struct i2c_client *client)
 397 {
 398         struct device *dev = &client->dev;
 399         struct silead_ts_data *data = i2c_get_clientdata(client);
 400         const struct firmware *fw = NULL;
 401         struct silead_fw_data *fw_data;
 402         unsigned int fw_size, i;
 403         int error;
 404
 405         dev_dbg(dev, "Firmware file name: %s", data->fw_name);
 406
 407         /*
 408          * Unfortunately, at the time of writing this comment, we have been unable to
 409          * get permission from Silead, or from device OEMs, to distribute the necessary
 410          * Silead firmware files in linux-firmware.
 411          *
 412          * On a whole bunch of devices the UEFI BIOS code contains a touchscreen driver,
 413          * which contains an embedded copy of the firmware. The fw-loader code has a
 414          * "platform" fallback mechanism, which together with info on the firmware
 415          * from drivers/platform/x86/touchscreen_dmi.c will use the firmware from the
 416          * UEFI driver when the firmware is missing from /lib/firmware. This makes the
 417          * touchscreen work OOTB without users needing to manually download the firmware.
 418          *
 419          * The firmware bundled with the original Windows/Android is usually newer then
 420          * the firmware in the UEFI driver and it is better calibrated. This better
 421          * calibration can lead to significant differences in the reported min/max
 422          * coordinates.
 423          *
 424          * To deal with this we first try to load the firmware without "platform"
 425          * fallback. If that fails we retry with "platform" fallback and if that
 426          * succeeds we apply an (optional) set of alternative min/max values from the
 427          * "silead,efi-fw-min-max" property.
 428          */
 429         error = firmware_request_nowarn(&fw, data->fw_name, dev);
 430         if (error) {
 431                 error = firmware_request_platform(&fw, data->fw_name, dev);
 432                 if (error) {
 433                         dev_err(dev, "Firmware request error %d\n", error);
 434                         return error;
 435                 }
 436
 437                 error = device_property_read_u32_array(dev, "silead,efi-fw-min-max",
 438                                                        data->efi_fw_min_max,
 439                                                        ARRAY_SIZE(data->efi_fw_min_max));
 440                 if (!error)
 441                         data->efi_fw_min_max_set = true;
 442
 443                 /* The EFI (platform) embedded fw does not have pen support */
 444                 if (data->pen_supported) {
 445                         dev_warn(dev, "Warning loading '%s' from filesystem failed, using EFI embedded copy.\n",
 446                                  data->fw_name);
 447                         dev_warn(dev, "Warning pen support is known to be broken in the EFI embedded fw version\n");
 448                         data->pen_supported = false;
 449                 }
 450         }
 451
 452         fw_size = fw->size / sizeof(*fw_data);
 453         fw_data = (struct silead_fw_data *)fw->data;
 454
 455         for (i = 0; i < fw_size; i++) {
 456                 error = i2c_smbus_write_i2c_block_data(client,
 457                                                        fw_data[i].offset,
 458                                                        4,
 459                                                        (u8 *)&fw_data[i].val);
 460                 if (error) {
 461                         dev_err(dev, "Firmware load error %d\n", error);
 462                         break;
 463                 }
 464         }
 465
 466         release_firmware(fw);
 467         return error ?: 0;
 468 }
 469
 470 static u32 silead_ts_get_status(struct i2c_client *client)
 471 {
 472         int error;
 473         __le32 status;
 474
 475         error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_STATUS,
 476                                               sizeof(status), (u8 *)&status);
 477         if (error < 0) {
 478                 dev_err(&client->dev, "Status read error %d\n", error);
 479                 return error;
 480         }
 481
 482         return le32_to_cpu(status);
 483 }
 484
 485 static int silead_ts_get_id(struct i2c_client *client)
 486 {
 487         struct silead_ts_data *data = i2c_get_clientdata(client);
 488         __le32 chip_id;
 489         int error;
 490
 491         error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_ID,
 492                                               sizeof(chip_id), (u8 *)&chip_id);
 493         if (error < 0)
 494                 return error;
 495
 496         data->chip_id = le32_to_cpu(chip_id);
 497         dev_info(&client->dev, "Silead chip ID: 0x%8X", data->chip_id);
 498
 499         return 0;
 500 }
 501
 502 static int silead_ts_setup(struct i2c_client *client)
 503 {
 504         int error;
 505         u32 status;
 506
 507         /*
 508          * Some buggy BIOS-es bring up the chip in a stuck state where it
 509          * blocks the I2C bus. The following steps are necessary to
 510          * unstuck the chip / bus:
 511          * 1. Turn off the Silead chip.
 512          * 2. Try to do an I2C transfer with the chip, this will fail in
 513          *    response to which the I2C-bus-driver will call:
 514          *    i2c_recover_bus() which will unstuck the I2C-bus. Note the
 515          *    unstuck-ing of the I2C bus only works if we first drop the
 516          *    chip off the bus by turning it off.
 517          * 3. Turn the chip back on.
 518          *
 519          * On the x86/ACPI systems were this problem is seen, step 1. and
 520          * 3. require making ACPI calls and dealing with ACPI Power
 521          * Resources. The workaround below runtime-suspends the chip to
 522          * turn it off, leaving it up to the ACPI subsystem to deal with
 523          * this.
 524          */
 525
 526         if (device_property_read_bool(&client->dev,
 527                                       "silead,stuck-controller-bug")) {
 528                 pm_runtime_set_active(&client->dev);
 529                 pm_runtime_enable(&client->dev);
 530                 pm_runtime_allow(&client->dev);
 531
 532                 pm_runtime_suspend(&client->dev);
 533
 534                 dev_warn(&client->dev, FW_BUG "Stuck I2C bus: please ignore the next 'controller timed out' error\n");
 535                 silead_ts_get_id(client);
 536
 537                 /* The forbid will also resume the device */
 538                 pm_runtime_forbid(&client->dev);
 539                 pm_runtime_disable(&client->dev);
 540         }
 541
 542         silead_ts_set_power(client, SILEAD_POWER_OFF);
 543         silead_ts_set_power(client, SILEAD_POWER_ON);
 544
 545         error = silead_ts_get_id(client);
 546         if (error) {
 547                 dev_err(&client->dev, "Chip ID read error %d\n", error);
 548                 return error;
 549         }
 550
 551         error = silead_ts_init(client);
 552         if (error)
 553                 return error;
 554
 555         error = silead_ts_reset(client);
 556         if (error)
 557                 return error;
 558
 559         error = silead_ts_load_fw(client);
 560         if (error)
 561                 return error;
 562
 563         error = silead_ts_startup(client);
 564         if (error)
 565                 return error;
 566
 567         status = silead_ts_get_status(client);
 568         if (status != SILEAD_STATUS_OK) {
 569                 dev_err(&client->dev,
 570                         "Initialization error, status: 0x%X\n", status);
 571                 return -ENODEV;
 572         }
 573
 574         return 0;
 575 }
 576
 577 static irqreturn_t silead_ts_threaded_irq_handler(int irq, void *id)
 578 {
 579         struct silead_ts_data *data = id;
 580         struct i2c_client *client = data->client;
 581
 582         silead_ts_read_data(client);
 583
 584         return IRQ_HANDLED;
 585 }
 586
 587 static void silead_ts_read_props(struct i2c_client *client)
 588 {
 589         struct silead_ts_data *data = i2c_get_clientdata(client);
 590         struct device *dev = &client->dev;
 591         const char *str;
 592         int error;
 593
 594         error = device_property_read_u32(dev, "silead,max-fingers",
 595                                          &data->max_fingers);
 596         if (error) {
 597                 dev_dbg(dev, "Max fingers read error %d\n", error);
 598                 data->max_fingers = 5; /* Most devices handle up-to 5 fingers */
 599         }
 600
 601         error = device_property_read_string(dev, "firmware-name", &str);
 602         if (!error)
 603                 snprintf(data->fw_name, sizeof(data->fw_name),
 604                          "silead/%s", str);
 605         else
 606                 dev_dbg(dev, "Firmware file name read error. Using default.");
 607
 608         data->pen_supported = device_property_read_bool(dev, "silead,pen-supported");
 609         device_property_read_u32(dev, "silead,pen-resolution-x", &data->pen_x_res);
 610         device_property_read_u32(dev, "silead,pen-resolution-y", &data->pen_y_res);
 611 }
 612
 613 #ifdef CONFIG_ACPI
 614 static int silead_ts_set_default_fw_name(struct silead_ts_data *data,
 615                                          const struct i2c_device_id *id)
 616 {
 617         const struct acpi_device_id *acpi_id;
 618         struct device *dev = &data->client->dev;
 619         int i;
 620
 621         if (ACPI_HANDLE(dev)) {
 622                 acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
 623                 if (!acpi_id)
 624                         return -ENODEV;
 625
 626                 snprintf(data->fw_name, sizeof(data->fw_name),
 627                          "silead/%s.fw", acpi_id->id);
 628
 629                 for (i = 0; i < strlen(data->fw_name); i++)
 630                         data->fw_name[i] = tolower(data->fw_name[i]);
 631         } else {
 632                 snprintf(data->fw_name, sizeof(data->fw_name),
 633                          "silead/%s.fw", id->name);
 634         }
 635
 636         return 0;
 637 }
 638 #else
 639 static int silead_ts_set_default_fw_name(struct silead_ts_data *data,
 640                                          const struct i2c_device_id *id)
 641 {
 642         snprintf(data->fw_name, sizeof(data->fw_name),
 643                  "silead/%s.fw", id->name);
 644         return 0;
 645 }
 646 #endif
 647
 648 static void silead_disable_regulator(void *arg)
 649 {
 650         struct silead_ts_data *data = arg;
 651
 652         regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
 653 }
 654
 655 static int silead_ts_probe(struct i2c_client *client)
 656 {
 657         const struct i2c_device_id *id = i2c_client_get_device_id(client);
 658         struct silead_ts_data *data;
 659         struct device *dev = &client->dev;
 660         int error;
 661
 662         if (!i2c_check_functionality(client->adapter,
 663                                      I2C_FUNC_I2C |
 664                                      I2C_FUNC_SMBUS_READ_I2C_BLOCK |
 665                                      I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
 666                 dev_err(dev, "I2C functionality check failed\n");
 667                 return -ENXIO;
 668         }
 669
 670         data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 671         if (!data)
 672                 return -ENOMEM;
 673
 674         i2c_set_clientdata(client, data);
 675         data->client = client;
 676
 677         error = silead_ts_set_default_fw_name(data, id);
 678         if (error)
 679                 return error;
 680
 681         silead_ts_read_props(client);
 682
 683         /* We must have the IRQ provided by DT or ACPI subsystem */
 684         if (client->irq <= 0)
 685                 return -ENODEV;
 686
 687         data->regulators[0].supply = "vddio";
 688         data->regulators[1].supply = "avdd";
 689         error = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators),
 690                                         data->regulators);
 691         if (error)
 692                 return error;
 693
 694         /*
 695          * Enable regulators at probe and disable them at remove, we need
 696          * to keep the chip powered otherwise it forgets its firmware.
 697          */
 698         error = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
 699                                       data->regulators);
 700         if (error)
 701                 return error;
 702
 703         error = devm_add_action_or_reset(dev, silead_disable_regulator, data);
 704         if (error)
 705                 return error;
 706
 707         /* Power GPIO pin */
 708         data->gpio_power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW);
 709         if (IS_ERR(data->gpio_power)) {
 710                 if (PTR_ERR(data->gpio_power) != -EPROBE_DEFER)
 711                         dev_err(dev, "Shutdown GPIO request failed\n");
 712                 return PTR_ERR(data->gpio_power);
 713         }
 714
 715         error = silead_ts_setup(client);
 716         if (error)
 717                 return error;
 718
 719         error = silead_ts_request_input_dev(data);
 720         if (error)
 721                 return error;
 722
 723         error = silead_ts_request_pen_input_dev(data);
 724         if (error)
 725                 return error;
 726
 727         error = devm_request_threaded_irq(dev, client->irq,
 728                                           NULL, silead_ts_threaded_irq_handler,
 729                                           IRQF_ONESHOT, client->name, data);
 730         if (error) {
 731                 if (error != -EPROBE_DEFER)
 732                         dev_err(dev, "IRQ request failed %d\n", error);
 733                 return error;
 734         }
 735
 736         return 0;
 737 }
 738
 739 static int silead_ts_suspend(struct device *dev)
 740 {
 741         struct i2c_client *client = to_i2c_client(dev);
 742
 743         disable_irq(client->irq);
 744         silead_ts_set_power(client, SILEAD_POWER_OFF);
 745         return 0;
 746 }
 747
 748 static int silead_ts_resume(struct device *dev)
 749 {
 750         struct i2c_client *client = to_i2c_client(dev);
 751         bool second_try = false;
 752         int error, status;
 753
 754         silead_ts_set_power(client, SILEAD_POWER_ON);
 755
 756  retry:
 757         error = silead_ts_reset(client);
 758         if (error)
 759                 return error;
 760
 761         if (second_try) {
 762                 error = silead_ts_load_fw(client);
 763                 if (error)
 764                         return error;
 765         }
 766
 767         error = silead_ts_startup(client);
 768         if (error)
 769                 return error;
 770
 771         status = silead_ts_get_status(client);
 772         if (status != SILEAD_STATUS_OK) {
 773                 if (!second_try) {
 774                         second_try = true;
 775                         dev_dbg(dev, "Reloading firmware after unsuccessful resume\n");
 776                         goto retry;
 777                 }
 778                 dev_err(dev, "Resume error, status: 0x%02x\n", status);
 779                 return -ENODEV;
 780         }
 781
 782         enable_irq(client->irq);
 783
 784         return 0;
 785 }
 786
 787 static DEFINE_SIMPLE_DEV_PM_OPS(silead_ts_pm, silead_ts_suspend, silead_ts_resume);
 788
 789 static const struct i2c_device_id silead_ts_id[] = {
 790         { "gsl1680", 0 },
 791         { "gsl1688", 0 },
 792         { "gsl3670", 0 },
 793         { "gsl3675", 0 },
 794         { "gsl3692", 0 },
 795         { "mssl1680", 0 },
 796         { }
 797 };
 798 MODULE_DEVICE_TABLE(i2c, silead_ts_id);
 799
 800 #ifdef CONFIG_ACPI
 801 static const struct acpi_device_id silead_ts_acpi_match[] = {
 802         { "GSL1680", 0 },
 803         { "GSL1688", 0 },
 804         { "GSL3670", 0 },
 805         { "GSL3675", 0 },
 806         { "GSL3692", 0 },
 807         { "MSSL1680", 0 },
 808         { "MSSL0001", 0 },
 809         { "MSSL0002", 0 },
 810         { "MSSL0017", 0 },
 811         { }
 812 };
 813 MODULE_DEVICE_TABLE(acpi, silead_ts_acpi_match);
 814 #endif
 815
 816 #ifdef CONFIG_OF
 817 static const struct of_device_id silead_ts_of_match[] = {
 818         { .compatible = "silead,gsl1680" },
 819         { .compatible = "silead,gsl1688" },
 820         { .compatible = "silead,gsl3670" },
 821         { .compatible = "silead,gsl3675" },
 822         { .compatible = "silead,gsl3692" },
 823         { },
 824 };
 825 MODULE_DEVICE_TABLE(of, silead_ts_of_match);
 826 #endif
 827
 828 static struct i2c_driver silead_ts_driver = {
 829         .probe = silead_ts_probe,
 830         .id_table = silead_ts_id,
 831         .driver = {
 832                 .name = SILEAD_TS_NAME,
 833                 .acpi_match_table = ACPI_PTR(silead_ts_acpi_match),
 834                 .of_match_table = of_match_ptr(silead_ts_of_match),
 835                 .pm = pm_sleep_ptr(&silead_ts_pm),
 836         },
 837 };
 838 module_i2c_driver(silead_ts_driver);
 839
 840 MODULE_AUTHOR("Robert Dolca <robert.dolca@intel.com>");
 841 MODULE_DESCRIPTION("Silead I2C touchscreen driver");
 842 MODULE_LICENSE("GPL");