2 * This file is part of the Chelsio T4 Ethernet driver for Linux.
4 * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
6 * This software is available to you under a choice of one of two
7 * licenses. You may choose to be licensed under the terms of the GNU
8 * General Public License (GPL) Version 2, available from the file
9 * COPYING in the main directory of this source tree, or the
10 * OpenIB.org BSD license below:
12 * Redistribution and use in source and binary forms, with or
13 * without modification, are permitted provided that the following
16 * - Redistributions of source code must retain the above
17 * copyright notice, this list of conditions and the following
20 * - Redistributions in binary form must reproduce the above
21 * copyright notice, this list of conditions and the following
22 * disclaimer in the documentation and/or other materials
23 * provided with the distribution.
25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
35 #include <linux/init.h>
36 #include <linux/delay.h>
42 * t4_wait_op_done_val - wait until an operation is completed
43 * @adapter: the adapter performing the operation
44 * @reg: the register to check for completion
45 * @mask: a single-bit field within @reg that indicates completion
46 * @polarity: the value of the field when the operation is completed
47 * @attempts: number of check iterations
48 * @delay: delay in usecs between iterations
49 * @valp: where to store the value of the register at completion time
51 * Wait until an operation is completed by checking a bit in a register
52 * up to @attempts times. If @valp is not NULL the value of the register
53 * at the time it indicated completion is stored there. Returns 0 if the
54 * operation completes and -EAGAIN otherwise.
56 static int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask,
57 int polarity, int attempts, int delay, u32 *valp)
60 u32 val = t4_read_reg(adapter, reg);
62 if (!!(val & mask) == polarity) {
74 static inline int t4_wait_op_done(struct adapter *adapter, int reg, u32 mask,
75 int polarity, int attempts, int delay)
77 return t4_wait_op_done_val(adapter, reg, mask, polarity, attempts,
82 * t4_set_reg_field - set a register field to a value
83 * @adapter: the adapter to program
84 * @addr: the register address
85 * @mask: specifies the portion of the register to modify
86 * @val: the new value for the register field
88 * Sets a register field specified by the supplied mask to the
91 void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask,
94 u32 v = t4_read_reg(adapter, addr) & ~mask;
96 t4_write_reg(adapter, addr, v | val);
97 (void) t4_read_reg(adapter, addr); /* flush */
101 * t4_read_indirect - read indirectly addressed registers
103 * @addr_reg: register holding the indirect address
104 * @data_reg: register holding the value of the indirect register
105 * @vals: where the read register values are stored
106 * @nregs: how many indirect registers to read
107 * @start_idx: index of first indirect register to read
109 * Reads registers that are accessed indirectly through an address/data
112 static void t4_read_indirect(struct adapter *adap, unsigned int addr_reg,
113 unsigned int data_reg, u32 *vals,
114 unsigned int nregs, unsigned int start_idx)
117 t4_write_reg(adap, addr_reg, start_idx);
118 *vals++ = t4_read_reg(adap, data_reg);
124 * Get the reply to a mailbox command and store it in @rpl in big-endian order.
126 static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit,
129 for ( ; nflit; nflit--, mbox_addr += 8)
130 *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr));
134 * Handle a FW assertion reported in a mailbox.
136 static void fw_asrt(struct adapter *adap, u32 mbox_addr)
138 struct fw_debug_cmd asrt;
140 get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr);
141 dev_alert(adap->pdev_dev,
142 "FW assertion at %.16s:%u, val0 %#x, val1 %#x\n",
143 asrt.u.assert.filename_0_7, ntohl(asrt.u.assert.line),
144 ntohl(asrt.u.assert.x), ntohl(asrt.u.assert.y));
147 static void dump_mbox(struct adapter *adap, int mbox, u32 data_reg)
149 dev_err(adap->pdev_dev,
150 "mbox %d: %llx %llx %llx %llx %llx %llx %llx %llx\n", mbox,
151 (unsigned long long)t4_read_reg64(adap, data_reg),
152 (unsigned long long)t4_read_reg64(adap, data_reg + 8),
153 (unsigned long long)t4_read_reg64(adap, data_reg + 16),
154 (unsigned long long)t4_read_reg64(adap, data_reg + 24),
155 (unsigned long long)t4_read_reg64(adap, data_reg + 32),
156 (unsigned long long)t4_read_reg64(adap, data_reg + 40),
157 (unsigned long long)t4_read_reg64(adap, data_reg + 48),
158 (unsigned long long)t4_read_reg64(adap, data_reg + 56));
162 * t4_wr_mbox_meat - send a command to FW through the given mailbox
164 * @mbox: index of the mailbox to use
165 * @cmd: the command to write
166 * @size: command length in bytes
167 * @rpl: where to optionally store the reply
168 * @sleep_ok: if true we may sleep while awaiting command completion
170 * Sends the given command to FW through the selected mailbox and waits
171 * for the FW to execute the command. If @rpl is not %NULL it is used to
172 * store the FW's reply to the command. The command and its optional
173 * reply are of the same length. FW can take up to %FW_CMD_MAX_TIMEOUT ms
174 * to respond. @sleep_ok determines whether we may sleep while awaiting
175 * the response. If sleeping is allowed we use progressive backoff
178 * The return value is 0 on success or a negative errno on failure. A
179 * failure can happen either because we are not able to execute the
180 * command or FW executes it but signals an error. In the latter case
181 * the return value is the error code indicated by FW (negated).
183 int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size,
184 void *rpl, bool sleep_ok)
186 static const int delay[] = {
187 1, 1, 3, 5, 10, 10, 20, 50, 100, 200
192 int i, ms, delay_idx;
193 const __be64 *p = cmd;
194 u32 data_reg = PF_REG(mbox, CIM_PF_MAILBOX_DATA);
195 u32 ctl_reg = PF_REG(mbox, CIM_PF_MAILBOX_CTRL);
197 if ((size & 15) || size > MBOX_LEN)
201 * If the device is off-line, as in EEH, commands will time out.
202 * Fail them early so we don't waste time waiting.
204 if (adap->pdev->error_state != pci_channel_io_normal)
207 v = MBOWNER_GET(t4_read_reg(adap, ctl_reg));
208 for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++)
209 v = MBOWNER_GET(t4_read_reg(adap, ctl_reg));
211 if (v != MBOX_OWNER_DRV)
212 return v ? -EBUSY : -ETIMEDOUT;
214 for (i = 0; i < size; i += 8)
215 t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p++));
217 t4_write_reg(adap, ctl_reg, MBMSGVALID | MBOWNER(MBOX_OWNER_FW));
218 t4_read_reg(adap, ctl_reg); /* flush write */
223 for (i = 0; i < FW_CMD_MAX_TIMEOUT; i += ms) {
225 ms = delay[delay_idx]; /* last element may repeat */
226 if (delay_idx < ARRAY_SIZE(delay) - 1)
232 v = t4_read_reg(adap, ctl_reg);
233 if (MBOWNER_GET(v) == MBOX_OWNER_DRV) {
234 if (!(v & MBMSGVALID)) {
235 t4_write_reg(adap, ctl_reg, 0);
239 res = t4_read_reg64(adap, data_reg);
240 if (FW_CMD_OP_GET(res >> 32) == FW_DEBUG_CMD) {
241 fw_asrt(adap, data_reg);
242 res = FW_CMD_RETVAL(EIO);
244 get_mbox_rpl(adap, rpl, size / 8, data_reg);
246 if (FW_CMD_RETVAL_GET((int)res))
247 dump_mbox(adap, mbox, data_reg);
248 t4_write_reg(adap, ctl_reg, 0);
249 return -FW_CMD_RETVAL_GET((int)res);
253 dump_mbox(adap, mbox, data_reg);
254 dev_err(adap->pdev_dev, "command %#x in mailbox %d timed out\n",
255 *(const u8 *)cmd, mbox);
260 * t4_mc_read - read from MC through backdoor accesses
262 * @addr: address of first byte requested
263 * @data: 64 bytes of data containing the requested address
264 * @ecc: where to store the corresponding 64-bit ECC word
266 * Read 64 bytes of data from MC starting at a 64-byte-aligned address
267 * that covers the requested address @addr. If @parity is not %NULL it
268 * is assigned the 64-bit ECC word for the read data.
270 int t4_mc_read(struct adapter *adap, u32 addr, __be32 *data, u64 *ecc)
274 if (t4_read_reg(adap, MC_BIST_CMD) & START_BIST)
276 t4_write_reg(adap, MC_BIST_CMD_ADDR, addr & ~0x3fU);
277 t4_write_reg(adap, MC_BIST_CMD_LEN, 64);
278 t4_write_reg(adap, MC_BIST_DATA_PATTERN, 0xc);
279 t4_write_reg(adap, MC_BIST_CMD, BIST_OPCODE(1) | START_BIST |
281 i = t4_wait_op_done(adap, MC_BIST_CMD, START_BIST, 0, 10, 1);
285 #define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA, i)
287 for (i = 15; i >= 0; i--)
288 *data++ = htonl(t4_read_reg(adap, MC_DATA(i)));
290 *ecc = t4_read_reg64(adap, MC_DATA(16));
296 * t4_edc_read - read from EDC through backdoor accesses
298 * @idx: which EDC to access
299 * @addr: address of first byte requested
300 * @data: 64 bytes of data containing the requested address
301 * @ecc: where to store the corresponding 64-bit ECC word
303 * Read 64 bytes of data from EDC starting at a 64-byte-aligned address
304 * that covers the requested address @addr. If @parity is not %NULL it
305 * is assigned the 64-bit ECC word for the read data.
307 int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc)
312 if (t4_read_reg(adap, EDC_BIST_CMD + idx) & START_BIST)
314 t4_write_reg(adap, EDC_BIST_CMD_ADDR + idx, addr & ~0x3fU);
315 t4_write_reg(adap, EDC_BIST_CMD_LEN + idx, 64);
316 t4_write_reg(adap, EDC_BIST_DATA_PATTERN + idx, 0xc);
317 t4_write_reg(adap, EDC_BIST_CMD + idx,
318 BIST_OPCODE(1) | BIST_CMD_GAP(1) | START_BIST);
319 i = t4_wait_op_done(adap, EDC_BIST_CMD + idx, START_BIST, 0, 10, 1);
323 #define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA, i) + idx)
325 for (i = 15; i >= 0; i--)
326 *data++ = htonl(t4_read_reg(adap, EDC_DATA(i)));
328 *ecc = t4_read_reg64(adap, EDC_DATA(16));
334 * Partial EEPROM Vital Product Data structure. Includes only the ID and
345 #define EEPROM_STAT_ADDR 0x7bfc
350 * t4_seeprom_wp - enable/disable EEPROM write protection
351 * @adapter: the adapter
352 * @enable: whether to enable or disable write protection
354 * Enables or disables write protection on the serial EEPROM.
356 int t4_seeprom_wp(struct adapter *adapter, bool enable)
358 unsigned int v = enable ? 0xc : 0;
359 int ret = pci_write_vpd(adapter->pdev, EEPROM_STAT_ADDR, 4, &v);
360 return ret < 0 ? ret : 0;
364 * get_vpd_params - read VPD parameters from VPD EEPROM
365 * @adapter: adapter to read
366 * @p: where to store the parameters
368 * Reads card parameters stored in VPD EEPROM.
370 static int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
374 u8 vpd[VPD_LEN], csum;
375 unsigned int vpdr_len;
376 const struct t4_vpd_hdr *v;
378 ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(vpd), vpd);
382 v = (const struct t4_vpd_hdr *)vpd;
383 vpdr_len = pci_vpd_lrdt_size(&v->vpdr_tag);
384 if (vpdr_len + sizeof(struct t4_vpd_hdr) > VPD_LEN) {
385 dev_err(adapter->pdev_dev, "bad VPD-R length %u\n", vpdr_len);
389 #define FIND_VPD_KW(var, name) do { \
390 var = pci_vpd_find_info_keyword(&v->id_tag, sizeof(struct t4_vpd_hdr), \
393 dev_err(adapter->pdev_dev, "missing VPD keyword " name "\n"); \
396 var += PCI_VPD_INFO_FLD_HDR_SIZE; \
399 FIND_VPD_KW(i, "RV");
400 for (csum = 0; i >= 0; i--)
404 dev_err(adapter->pdev_dev,
405 "corrupted VPD EEPROM, actual csum %u\n", csum);
409 FIND_VPD_KW(ec, "EC");
410 FIND_VPD_KW(sn, "SN");
413 memcpy(p->id, v->id_data, ID_LEN);
415 memcpy(p->ec, vpd + ec, EC_LEN);
417 i = pci_vpd_info_field_size(vpd + sn - PCI_VPD_INFO_FLD_HDR_SIZE);
418 memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN));
423 /* serial flash and firmware constants */
425 SF_ATTEMPTS = 10, /* max retries for SF operations */
427 /* flash command opcodes */
428 SF_PROG_PAGE = 2, /* program page */
429 SF_WR_DISABLE = 4, /* disable writes */
430 SF_RD_STATUS = 5, /* read status register */
431 SF_WR_ENABLE = 6, /* enable writes */
432 SF_RD_DATA_FAST = 0xb, /* read flash */
433 SF_RD_ID = 0x9f, /* read ID */
434 SF_ERASE_SECTOR = 0xd8, /* erase sector */
436 FW_MAX_SIZE = 512 * 1024,
440 * sf1_read - read data from the serial flash
441 * @adapter: the adapter
442 * @byte_cnt: number of bytes to read
443 * @cont: whether another operation will be chained
444 * @lock: whether to lock SF for PL access only
445 * @valp: where to store the read data
447 * Reads up to 4 bytes of data from the serial flash. The location of
448 * the read needs to be specified prior to calling this by issuing the
449 * appropriate commands to the serial flash.
451 static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont,
456 if (!byte_cnt || byte_cnt > 4)
458 if (t4_read_reg(adapter, SF_OP) & BUSY)
460 cont = cont ? SF_CONT : 0;
461 lock = lock ? SF_LOCK : 0;
462 t4_write_reg(adapter, SF_OP, lock | cont | BYTECNT(byte_cnt - 1));
463 ret = t4_wait_op_done(adapter, SF_OP, BUSY, 0, SF_ATTEMPTS, 5);
465 *valp = t4_read_reg(adapter, SF_DATA);
470 * sf1_write - write data to the serial flash
471 * @adapter: the adapter
472 * @byte_cnt: number of bytes to write
473 * @cont: whether another operation will be chained
474 * @lock: whether to lock SF for PL access only
475 * @val: value to write
477 * Writes up to 4 bytes of data to the serial flash. The location of
478 * the write needs to be specified prior to calling this by issuing the
479 * appropriate commands to the serial flash.
481 static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont,
484 if (!byte_cnt || byte_cnt > 4)
486 if (t4_read_reg(adapter, SF_OP) & BUSY)
488 cont = cont ? SF_CONT : 0;
489 lock = lock ? SF_LOCK : 0;
490 t4_write_reg(adapter, SF_DATA, val);
491 t4_write_reg(adapter, SF_OP, lock |
492 cont | BYTECNT(byte_cnt - 1) | OP_WR);
493 return t4_wait_op_done(adapter, SF_OP, BUSY, 0, SF_ATTEMPTS, 5);
497 * flash_wait_op - wait for a flash operation to complete
498 * @adapter: the adapter
499 * @attempts: max number of polls of the status register
500 * @delay: delay between polls in ms
502 * Wait for a flash operation to complete by polling the status register.
504 static int flash_wait_op(struct adapter *adapter, int attempts, int delay)
510 if ((ret = sf1_write(adapter, 1, 1, 1, SF_RD_STATUS)) != 0 ||
511 (ret = sf1_read(adapter, 1, 0, 1, &status)) != 0)
523 * t4_read_flash - read words from serial flash
524 * @adapter: the adapter
525 * @addr: the start address for the read
526 * @nwords: how many 32-bit words to read
527 * @data: where to store the read data
528 * @byte_oriented: whether to store data as bytes or as words
530 * Read the specified number of 32-bit words from the serial flash.
531 * If @byte_oriented is set the read data is stored as a byte array
532 * (i.e., big-endian), otherwise as 32-bit words in the platform's
535 static int t4_read_flash(struct adapter *adapter, unsigned int addr,
536 unsigned int nwords, u32 *data, int byte_oriented)
540 if (addr + nwords * sizeof(u32) > adapter->params.sf_size || (addr & 3))
543 addr = swab32(addr) | SF_RD_DATA_FAST;
545 if ((ret = sf1_write(adapter, 4, 1, 0, addr)) != 0 ||
546 (ret = sf1_read(adapter, 1, 1, 0, data)) != 0)
549 for ( ; nwords; nwords--, data++) {
550 ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data);
552 t4_write_reg(adapter, SF_OP, 0); /* unlock SF */
556 *data = htonl(*data);
562 * t4_write_flash - write up to a page of data to the serial flash
563 * @adapter: the adapter
564 * @addr: the start address to write
565 * @n: length of data to write in bytes
566 * @data: the data to write
568 * Writes up to a page of data (256 bytes) to the serial flash starting
569 * at the given address. All the data must be written to the same page.
571 static int t4_write_flash(struct adapter *adapter, unsigned int addr,
572 unsigned int n, const u8 *data)
576 unsigned int i, c, left, val, offset = addr & 0xff;
578 if (addr >= adapter->params.sf_size || offset + n > SF_PAGE_SIZE)
581 val = swab32(addr) | SF_PROG_PAGE;
583 if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 ||
584 (ret = sf1_write(adapter, 4, 1, 1, val)) != 0)
587 for (left = n; left; left -= c) {
589 for (val = 0, i = 0; i < c; ++i)
590 val = (val << 8) + *data++;
592 ret = sf1_write(adapter, c, c != left, 1, val);
596 ret = flash_wait_op(adapter, 8, 1);
600 t4_write_reg(adapter, SF_OP, 0); /* unlock SF */
602 /* Read the page to verify the write succeeded */
603 ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 1);
607 if (memcmp(data - n, (u8 *)buf + offset, n)) {
608 dev_err(adapter->pdev_dev,
609 "failed to correctly write the flash page at %#x\n",
616 t4_write_reg(adapter, SF_OP, 0); /* unlock SF */
621 * get_fw_version - read the firmware version
622 * @adapter: the adapter
623 * @vers: where to place the version
625 * Reads the FW version from flash.
627 static int get_fw_version(struct adapter *adapter, u32 *vers)
629 return t4_read_flash(adapter, adapter->params.sf_fw_start +
630 offsetof(struct fw_hdr, fw_ver), 1, vers, 0);
634 * get_tp_version - read the TP microcode version
635 * @adapter: the adapter
636 * @vers: where to place the version
638 * Reads the TP microcode version from flash.
640 static int get_tp_version(struct adapter *adapter, u32 *vers)
642 return t4_read_flash(adapter, adapter->params.sf_fw_start +
643 offsetof(struct fw_hdr, tp_microcode_ver),
648 * t4_check_fw_version - check if the FW is compatible with this driver
649 * @adapter: the adapter
651 * Checks if an adapter's FW is compatible with the driver. Returns 0
652 * if there's exact match, a negative error if the version could not be
653 * read or there's a major version mismatch, and a positive value if the
654 * expected major version is found but there's a minor version mismatch.
656 int t4_check_fw_version(struct adapter *adapter)
659 int ret, major, minor, micro;
661 ret = get_fw_version(adapter, &adapter->params.fw_vers);
663 ret = get_tp_version(adapter, &adapter->params.tp_vers);
665 ret = t4_read_flash(adapter, adapter->params.sf_fw_start +
666 offsetof(struct fw_hdr, intfver_nic),
671 major = FW_HDR_FW_VER_MAJOR_GET(adapter->params.fw_vers);
672 minor = FW_HDR_FW_VER_MINOR_GET(adapter->params.fw_vers);
673 micro = FW_HDR_FW_VER_MICRO_GET(adapter->params.fw_vers);
674 memcpy(adapter->params.api_vers, api_vers,
675 sizeof(adapter->params.api_vers));
677 if (major != FW_VERSION_MAJOR) { /* major mismatch - fail */
678 dev_err(adapter->pdev_dev,
679 "card FW has major version %u, driver wants %u\n",
680 major, FW_VERSION_MAJOR);
684 if (minor == FW_VERSION_MINOR && micro == FW_VERSION_MICRO)
685 return 0; /* perfect match */
687 /* Minor/micro version mismatch. Report it but often it's OK. */
692 * t4_flash_erase_sectors - erase a range of flash sectors
693 * @adapter: the adapter
694 * @start: the first sector to erase
695 * @end: the last sector to erase
697 * Erases the sectors in the given inclusive range.
699 static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end)
703 while (start <= end) {
704 if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 ||
705 (ret = sf1_write(adapter, 4, 0, 1,
706 SF_ERASE_SECTOR | (start << 8))) != 0 ||
707 (ret = flash_wait_op(adapter, 14, 500)) != 0) {
708 dev_err(adapter->pdev_dev,
709 "erase of flash sector %d failed, error %d\n",
715 t4_write_reg(adapter, SF_OP, 0); /* unlock SF */
720 * t4_load_fw - download firmware
722 * @fw_data: the firmware image to write
725 * Write the supplied firmware image to the card's serial flash.
727 int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size)
732 u8 first_page[SF_PAGE_SIZE];
733 const u32 *p = (const u32 *)fw_data;
734 const struct fw_hdr *hdr = (const struct fw_hdr *)fw_data;
735 unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
736 unsigned int fw_img_start = adap->params.sf_fw_start;
737 unsigned int fw_start_sec = fw_img_start / sf_sec_size;
740 dev_err(adap->pdev_dev, "FW image has no data\n");
744 dev_err(adap->pdev_dev,
745 "FW image size not multiple of 512 bytes\n");
748 if (ntohs(hdr->len512) * 512 != size) {
749 dev_err(adap->pdev_dev,
750 "FW image size differs from size in FW header\n");
753 if (size > FW_MAX_SIZE) {
754 dev_err(adap->pdev_dev, "FW image too large, max is %u bytes\n",
759 for (csum = 0, i = 0; i < size / sizeof(csum); i++)
762 if (csum != 0xffffffff) {
763 dev_err(adap->pdev_dev,
764 "corrupted firmware image, checksum %#x\n", csum);
768 i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */
769 ret = t4_flash_erase_sectors(adap, fw_start_sec, fw_start_sec + i - 1);
774 * We write the correct version at the end so the driver can see a bad
775 * version if the FW write fails. Start by writing a copy of the
776 * first page with a bad version.
778 memcpy(first_page, fw_data, SF_PAGE_SIZE);
779 ((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff);
780 ret = t4_write_flash(adap, fw_img_start, SF_PAGE_SIZE, first_page);
785 for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
786 addr += SF_PAGE_SIZE;
787 fw_data += SF_PAGE_SIZE;
788 ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data);
793 ret = t4_write_flash(adap,
794 fw_img_start + offsetof(struct fw_hdr, fw_ver),
795 sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver);
798 dev_err(adap->pdev_dev, "firmware download failed, error %d\n",
803 #define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\
804 FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_ANEG)
807 * t4_link_start - apply link configuration to MAC/PHY
808 * @phy: the PHY to setup
809 * @mac: the MAC to setup
810 * @lc: the requested link configuration
812 * Set up a port's MAC and PHY according to a desired link configuration.
813 * - If the PHY can auto-negotiate first decide what to advertise, then
814 * enable/disable auto-negotiation as desired, and reset.
815 * - If the PHY does not auto-negotiate just reset it.
816 * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
817 * otherwise do it later based on the outcome of auto-negotiation.
819 int t4_link_start(struct adapter *adap, unsigned int mbox, unsigned int port,
820 struct link_config *lc)
822 struct fw_port_cmd c;
823 unsigned int fc = 0, mdi = FW_PORT_MDI(FW_PORT_MDI_AUTO);
826 if (lc->requested_fc & PAUSE_RX)
827 fc |= FW_PORT_CAP_FC_RX;
828 if (lc->requested_fc & PAUSE_TX)
829 fc |= FW_PORT_CAP_FC_TX;
831 memset(&c, 0, sizeof(c));
832 c.op_to_portid = htonl(FW_CMD_OP(FW_PORT_CMD) | FW_CMD_REQUEST |
833 FW_CMD_EXEC | FW_PORT_CMD_PORTID(port));
834 c.action_to_len16 = htonl(FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) |
837 if (!(lc->supported & FW_PORT_CAP_ANEG)) {
838 c.u.l1cfg.rcap = htonl((lc->supported & ADVERT_MASK) | fc);
839 lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
840 } else if (lc->autoneg == AUTONEG_DISABLE) {
841 c.u.l1cfg.rcap = htonl(lc->requested_speed | fc | mdi);
842 lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
844 c.u.l1cfg.rcap = htonl(lc->advertising | fc | mdi);
846 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
850 * t4_restart_aneg - restart autonegotiation
852 * @mbox: mbox to use for the FW command
855 * Restarts autonegotiation for the selected port.
857 int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port)
859 struct fw_port_cmd c;
861 memset(&c, 0, sizeof(c));
862 c.op_to_portid = htonl(FW_CMD_OP(FW_PORT_CMD) | FW_CMD_REQUEST |
863 FW_CMD_EXEC | FW_PORT_CMD_PORTID(port));
864 c.action_to_len16 = htonl(FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) |
866 c.u.l1cfg.rcap = htonl(FW_PORT_CAP_ANEG);
867 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
871 unsigned int mask; /* bits to check in interrupt status */
872 const char *msg; /* message to print or NULL */
873 short stat_idx; /* stat counter to increment or -1 */
874 unsigned short fatal; /* whether the condition reported is fatal */
878 * t4_handle_intr_status - table driven interrupt handler
879 * @adapter: the adapter that generated the interrupt
880 * @reg: the interrupt status register to process
881 * @acts: table of interrupt actions
883 * A table driven interrupt handler that applies a set of masks to an
884 * interrupt status word and performs the corresponding actions if the
885 * interrupts described by the mask have occured. The actions include
886 * optionally emitting a warning or alert message. The table is terminated
887 * by an entry specifying mask 0. Returns the number of fatal interrupt
890 static int t4_handle_intr_status(struct adapter *adapter, unsigned int reg,
891 const struct intr_info *acts)
894 unsigned int mask = 0;
895 unsigned int status = t4_read_reg(adapter, reg);
897 for ( ; acts->mask; ++acts) {
898 if (!(status & acts->mask))
902 dev_alert(adapter->pdev_dev, "%s (0x%x)\n", acts->msg,
903 status & acts->mask);
904 } else if (acts->msg && printk_ratelimit())
905 dev_warn(adapter->pdev_dev, "%s (0x%x)\n", acts->msg,
906 status & acts->mask);
910 if (status) /* clear processed interrupts */
911 t4_write_reg(adapter, reg, status);
916 * Interrupt handler for the PCIE module.
918 static void pcie_intr_handler(struct adapter *adapter)
920 static const struct intr_info sysbus_intr_info[] = {
921 { RNPP, "RXNP array parity error", -1, 1 },
922 { RPCP, "RXPC array parity error", -1, 1 },
923 { RCIP, "RXCIF array parity error", -1, 1 },
924 { RCCP, "Rx completions control array parity error", -1, 1 },
925 { RFTP, "RXFT array parity error", -1, 1 },
928 static const struct intr_info pcie_port_intr_info[] = {
929 { TPCP, "TXPC array parity error", -1, 1 },
930 { TNPP, "TXNP array parity error", -1, 1 },
931 { TFTP, "TXFT array parity error", -1, 1 },
932 { TCAP, "TXCA array parity error", -1, 1 },
933 { TCIP, "TXCIF array parity error", -1, 1 },
934 { RCAP, "RXCA array parity error", -1, 1 },
935 { OTDD, "outbound request TLP discarded", -1, 1 },
936 { RDPE, "Rx data parity error", -1, 1 },
937 { TDUE, "Tx uncorrectable data error", -1, 1 },
940 static const struct intr_info pcie_intr_info[] = {
941 { MSIADDRLPERR, "MSI AddrL parity error", -1, 1 },
942 { MSIADDRHPERR, "MSI AddrH parity error", -1, 1 },
943 { MSIDATAPERR, "MSI data parity error", -1, 1 },
944 { MSIXADDRLPERR, "MSI-X AddrL parity error", -1, 1 },
945 { MSIXADDRHPERR, "MSI-X AddrH parity error", -1, 1 },
946 { MSIXDATAPERR, "MSI-X data parity error", -1, 1 },
947 { MSIXDIPERR, "MSI-X DI parity error", -1, 1 },
948 { PIOCPLPERR, "PCI PIO completion FIFO parity error", -1, 1 },
949 { PIOREQPERR, "PCI PIO request FIFO parity error", -1, 1 },
950 { TARTAGPERR, "PCI PCI target tag FIFO parity error", -1, 1 },
951 { CCNTPERR, "PCI CMD channel count parity error", -1, 1 },
952 { CREQPERR, "PCI CMD channel request parity error", -1, 1 },
953 { CRSPPERR, "PCI CMD channel response parity error", -1, 1 },
954 { DCNTPERR, "PCI DMA channel count parity error", -1, 1 },
955 { DREQPERR, "PCI DMA channel request parity error", -1, 1 },
956 { DRSPPERR, "PCI DMA channel response parity error", -1, 1 },
957 { HCNTPERR, "PCI HMA channel count parity error", -1, 1 },
958 { HREQPERR, "PCI HMA channel request parity error", -1, 1 },
959 { HRSPPERR, "PCI HMA channel response parity error", -1, 1 },
960 { CFGSNPPERR, "PCI config snoop FIFO parity error", -1, 1 },
961 { FIDPERR, "PCI FID parity error", -1, 1 },
962 { INTXCLRPERR, "PCI INTx clear parity error", -1, 1 },
963 { MATAGPERR, "PCI MA tag parity error", -1, 1 },
964 { PIOTAGPERR, "PCI PIO tag parity error", -1, 1 },
965 { RXCPLPERR, "PCI Rx completion parity error", -1, 1 },
966 { RXWRPERR, "PCI Rx write parity error", -1, 1 },
967 { RPLPERR, "PCI replay buffer parity error", -1, 1 },
968 { PCIESINT, "PCI core secondary fault", -1, 1 },
969 { PCIEPINT, "PCI core primary fault", -1, 1 },
970 { UNXSPLCPLERR, "PCI unexpected split completion error", -1, 0 },
976 fat = t4_handle_intr_status(adapter,
977 PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS,
979 t4_handle_intr_status(adapter,
980 PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS,
981 pcie_port_intr_info) +
982 t4_handle_intr_status(adapter, PCIE_INT_CAUSE, pcie_intr_info);
984 t4_fatal_err(adapter);
988 * TP interrupt handler.
990 static void tp_intr_handler(struct adapter *adapter)
992 static const struct intr_info tp_intr_info[] = {
993 { 0x3fffffff, "TP parity error", -1, 1 },
994 { FLMTXFLSTEMPTY, "TP out of Tx pages", -1, 1 },
998 if (t4_handle_intr_status(adapter, TP_INT_CAUSE, tp_intr_info))
999 t4_fatal_err(adapter);
1003 * SGE interrupt handler.
1005 static void sge_intr_handler(struct adapter *adapter)
1009 static const struct intr_info sge_intr_info[] = {
1010 { ERR_CPL_EXCEED_IQE_SIZE,
1011 "SGE received CPL exceeding IQE size", -1, 1 },
1012 { ERR_INVALID_CIDX_INC,
1013 "SGE GTS CIDX increment too large", -1, 0 },
1014 { ERR_CPL_OPCODE_0, "SGE received 0-length CPL", -1, 0 },
1015 { ERR_DROPPED_DB, "SGE doorbell dropped", -1, 0 },
1016 { ERR_DATA_CPL_ON_HIGH_QID1 | ERR_DATA_CPL_ON_HIGH_QID0,
1017 "SGE IQID > 1023 received CPL for FL", -1, 0 },
1018 { ERR_BAD_DB_PIDX3, "SGE DBP 3 pidx increment too large", -1,
1020 { ERR_BAD_DB_PIDX2, "SGE DBP 2 pidx increment too large", -1,
1022 { ERR_BAD_DB_PIDX1, "SGE DBP 1 pidx increment too large", -1,
1024 { ERR_BAD_DB_PIDX0, "SGE DBP 0 pidx increment too large", -1,
1026 { ERR_ING_CTXT_PRIO,
1027 "SGE too many priority ingress contexts", -1, 0 },
1028 { ERR_EGR_CTXT_PRIO,
1029 "SGE too many priority egress contexts", -1, 0 },
1030 { INGRESS_SIZE_ERR, "SGE illegal ingress QID", -1, 0 },
1031 { EGRESS_SIZE_ERR, "SGE illegal egress QID", -1, 0 },
1035 v = (u64)t4_read_reg(adapter, SGE_INT_CAUSE1) |
1036 ((u64)t4_read_reg(adapter, SGE_INT_CAUSE2) << 32);
1038 dev_alert(adapter->pdev_dev, "SGE parity error (%#llx)\n",
1039 (unsigned long long)v);
1040 t4_write_reg(adapter, SGE_INT_CAUSE1, v);
1041 t4_write_reg(adapter, SGE_INT_CAUSE2, v >> 32);
1044 if (t4_handle_intr_status(adapter, SGE_INT_CAUSE3, sge_intr_info) ||
1046 t4_fatal_err(adapter);
1050 * CIM interrupt handler.
1052 static void cim_intr_handler(struct adapter *adapter)
1054 static const struct intr_info cim_intr_info[] = {
1055 { PREFDROPINT, "CIM control register prefetch drop", -1, 1 },
1056 { OBQPARERR, "CIM OBQ parity error", -1, 1 },
1057 { IBQPARERR, "CIM IBQ parity error", -1, 1 },
1058 { MBUPPARERR, "CIM mailbox uP parity error", -1, 1 },
1059 { MBHOSTPARERR, "CIM mailbox host parity error", -1, 1 },
1060 { TIEQINPARERRINT, "CIM TIEQ outgoing parity error", -1, 1 },
1061 { TIEQOUTPARERRINT, "CIM TIEQ incoming parity error", -1, 1 },
1064 static const struct intr_info cim_upintr_info[] = {
1065 { RSVDSPACEINT, "CIM reserved space access", -1, 1 },
1066 { ILLTRANSINT, "CIM illegal transaction", -1, 1 },
1067 { ILLWRINT, "CIM illegal write", -1, 1 },
1068 { ILLRDINT, "CIM illegal read", -1, 1 },
1069 { ILLRDBEINT, "CIM illegal read BE", -1, 1 },
1070 { ILLWRBEINT, "CIM illegal write BE", -1, 1 },
1071 { SGLRDBOOTINT, "CIM single read from boot space", -1, 1 },
1072 { SGLWRBOOTINT, "CIM single write to boot space", -1, 1 },
1073 { BLKWRBOOTINT, "CIM block write to boot space", -1, 1 },
1074 { SGLRDFLASHINT, "CIM single read from flash space", -1, 1 },
1075 { SGLWRFLASHINT, "CIM single write to flash space", -1, 1 },
1076 { BLKWRFLASHINT, "CIM block write to flash space", -1, 1 },
1077 { SGLRDEEPROMINT, "CIM single EEPROM read", -1, 1 },
1078 { SGLWREEPROMINT, "CIM single EEPROM write", -1, 1 },
1079 { BLKRDEEPROMINT, "CIM block EEPROM read", -1, 1 },
1080 { BLKWREEPROMINT, "CIM block EEPROM write", -1, 1 },
1081 { SGLRDCTLINT , "CIM single read from CTL space", -1, 1 },
1082 { SGLWRCTLINT , "CIM single write to CTL space", -1, 1 },
1083 { BLKRDCTLINT , "CIM block read from CTL space", -1, 1 },
1084 { BLKWRCTLINT , "CIM block write to CTL space", -1, 1 },
1085 { SGLRDPLINT , "CIM single read from PL space", -1, 1 },
1086 { SGLWRPLINT , "CIM single write to PL space", -1, 1 },
1087 { BLKRDPLINT , "CIM block read from PL space", -1, 1 },
1088 { BLKWRPLINT , "CIM block write to PL space", -1, 1 },
1089 { REQOVRLOOKUPINT , "CIM request FIFO overwrite", -1, 1 },
1090 { RSPOVRLOOKUPINT , "CIM response FIFO overwrite", -1, 1 },
1091 { TIMEOUTINT , "CIM PIF timeout", -1, 1 },
1092 { TIMEOUTMAINT , "CIM PIF MA timeout", -1, 1 },
1098 fat = t4_handle_intr_status(adapter, CIM_HOST_INT_CAUSE,
1100 t4_handle_intr_status(adapter, CIM_HOST_UPACC_INT_CAUSE,
1103 t4_fatal_err(adapter);
1107 * ULP RX interrupt handler.
1109 static void ulprx_intr_handler(struct adapter *adapter)
1111 static const struct intr_info ulprx_intr_info[] = {
1112 { 0x1800000, "ULPRX context error", -1, 1 },
1113 { 0x7fffff, "ULPRX parity error", -1, 1 },
1117 if (t4_handle_intr_status(adapter, ULP_RX_INT_CAUSE, ulprx_intr_info))
1118 t4_fatal_err(adapter);
1122 * ULP TX interrupt handler.
1124 static void ulptx_intr_handler(struct adapter *adapter)
1126 static const struct intr_info ulptx_intr_info[] = {
1127 { PBL_BOUND_ERR_CH3, "ULPTX channel 3 PBL out of bounds", -1,
1129 { PBL_BOUND_ERR_CH2, "ULPTX channel 2 PBL out of bounds", -1,
1131 { PBL_BOUND_ERR_CH1, "ULPTX channel 1 PBL out of bounds", -1,
1133 { PBL_BOUND_ERR_CH0, "ULPTX channel 0 PBL out of bounds", -1,
1135 { 0xfffffff, "ULPTX parity error", -1, 1 },
1139 if (t4_handle_intr_status(adapter, ULP_TX_INT_CAUSE, ulptx_intr_info))
1140 t4_fatal_err(adapter);
1144 * PM TX interrupt handler.
1146 static void pmtx_intr_handler(struct adapter *adapter)
1148 static const struct intr_info pmtx_intr_info[] = {
1149 { PCMD_LEN_OVFL0, "PMTX channel 0 pcmd too large", -1, 1 },
1150 { PCMD_LEN_OVFL1, "PMTX channel 1 pcmd too large", -1, 1 },
1151 { PCMD_LEN_OVFL2, "PMTX channel 2 pcmd too large", -1, 1 },
1152 { ZERO_C_CMD_ERROR, "PMTX 0-length pcmd", -1, 1 },
1153 { PMTX_FRAMING_ERROR, "PMTX framing error", -1, 1 },
1154 { OESPI_PAR_ERROR, "PMTX oespi parity error", -1, 1 },
1155 { DB_OPTIONS_PAR_ERROR, "PMTX db_options parity error", -1, 1 },
1156 { ICSPI_PAR_ERROR, "PMTX icspi parity error", -1, 1 },
1157 { C_PCMD_PAR_ERROR, "PMTX c_pcmd parity error", -1, 1},
1161 if (t4_handle_intr_status(adapter, PM_TX_INT_CAUSE, pmtx_intr_info))
1162 t4_fatal_err(adapter);
1166 * PM RX interrupt handler.
1168 static void pmrx_intr_handler(struct adapter *adapter)
1170 static const struct intr_info pmrx_intr_info[] = {
1171 { ZERO_E_CMD_ERROR, "PMRX 0-length pcmd", -1, 1 },
1172 { PMRX_FRAMING_ERROR, "PMRX framing error", -1, 1 },
1173 { OCSPI_PAR_ERROR, "PMRX ocspi parity error", -1, 1 },
1174 { DB_OPTIONS_PAR_ERROR, "PMRX db_options parity error", -1, 1 },
1175 { IESPI_PAR_ERROR, "PMRX iespi parity error", -1, 1 },
1176 { E_PCMD_PAR_ERROR, "PMRX e_pcmd parity error", -1, 1},
1180 if (t4_handle_intr_status(adapter, PM_RX_INT_CAUSE, pmrx_intr_info))
1181 t4_fatal_err(adapter);
1185 * CPL switch interrupt handler.
1187 static void cplsw_intr_handler(struct adapter *adapter)
1189 static const struct intr_info cplsw_intr_info[] = {
1190 { CIM_OP_MAP_PERR, "CPLSW CIM op_map parity error", -1, 1 },
1191 { CIM_OVFL_ERROR, "CPLSW CIM overflow", -1, 1 },
1192 { TP_FRAMING_ERROR, "CPLSW TP framing error", -1, 1 },
1193 { SGE_FRAMING_ERROR, "CPLSW SGE framing error", -1, 1 },
1194 { CIM_FRAMING_ERROR, "CPLSW CIM framing error", -1, 1 },
1195 { ZERO_SWITCH_ERROR, "CPLSW no-switch error", -1, 1 },
1199 if (t4_handle_intr_status(adapter, CPL_INTR_CAUSE, cplsw_intr_info))
1200 t4_fatal_err(adapter);
1204 * LE interrupt handler.
1206 static void le_intr_handler(struct adapter *adap)
1208 static const struct intr_info le_intr_info[] = {
1209 { LIPMISS, "LE LIP miss", -1, 0 },
1210 { LIP0, "LE 0 LIP error", -1, 0 },
1211 { PARITYERR, "LE parity error", -1, 1 },
1212 { UNKNOWNCMD, "LE unknown command", -1, 1 },
1213 { REQQPARERR, "LE request queue parity error", -1, 1 },
1217 if (t4_handle_intr_status(adap, LE_DB_INT_CAUSE, le_intr_info))
1222 * MPS interrupt handler.
1224 static void mps_intr_handler(struct adapter *adapter)
1226 static const struct intr_info mps_rx_intr_info[] = {
1227 { 0xffffff, "MPS Rx parity error", -1, 1 },
1230 static const struct intr_info mps_tx_intr_info[] = {
1231 { TPFIFO, "MPS Tx TP FIFO parity error", -1, 1 },
1232 { NCSIFIFO, "MPS Tx NC-SI FIFO parity error", -1, 1 },
1233 { TXDATAFIFO, "MPS Tx data FIFO parity error", -1, 1 },
1234 { TXDESCFIFO, "MPS Tx desc FIFO parity error", -1, 1 },
1235 { BUBBLE, "MPS Tx underflow", -1, 1 },
1236 { SECNTERR, "MPS Tx SOP/EOP error", -1, 1 },
1237 { FRMERR, "MPS Tx framing error", -1, 1 },
1240 static const struct intr_info mps_trc_intr_info[] = {
1241 { FILTMEM, "MPS TRC filter parity error", -1, 1 },
1242 { PKTFIFO, "MPS TRC packet FIFO parity error", -1, 1 },
1243 { MISCPERR, "MPS TRC misc parity error", -1, 1 },
1246 static const struct intr_info mps_stat_sram_intr_info[] = {
1247 { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 },
1250 static const struct intr_info mps_stat_tx_intr_info[] = {
1251 { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 },
1254 static const struct intr_info mps_stat_rx_intr_info[] = {
1255 { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 },
1258 static const struct intr_info mps_cls_intr_info[] = {
1259 { MATCHSRAM, "MPS match SRAM parity error", -1, 1 },
1260 { MATCHTCAM, "MPS match TCAM parity error", -1, 1 },
1261 { HASHSRAM, "MPS hash SRAM parity error", -1, 1 },
1267 fat = t4_handle_intr_status(adapter, MPS_RX_PERR_INT_CAUSE,
1269 t4_handle_intr_status(adapter, MPS_TX_INT_CAUSE,
1271 t4_handle_intr_status(adapter, MPS_TRC_INT_CAUSE,
1272 mps_trc_intr_info) +
1273 t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_SRAM,
1274 mps_stat_sram_intr_info) +
1275 t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_TX_FIFO,
1276 mps_stat_tx_intr_info) +
1277 t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_RX_FIFO,
1278 mps_stat_rx_intr_info) +
1279 t4_handle_intr_status(adapter, MPS_CLS_INT_CAUSE,
1282 t4_write_reg(adapter, MPS_INT_CAUSE, CLSINT | TRCINT |
1283 RXINT | TXINT | STATINT);
1284 t4_read_reg(adapter, MPS_INT_CAUSE); /* flush */
1286 t4_fatal_err(adapter);
1289 #define MEM_INT_MASK (PERR_INT_CAUSE | ECC_CE_INT_CAUSE | ECC_UE_INT_CAUSE)
1292 * EDC/MC interrupt handler.
1294 static void mem_intr_handler(struct adapter *adapter, int idx)
1296 static const char name[3][5] = { "EDC0", "EDC1", "MC" };
1298 unsigned int addr, cnt_addr, v;
1300 if (idx <= MEM_EDC1) {
1301 addr = EDC_REG(EDC_INT_CAUSE, idx);
1302 cnt_addr = EDC_REG(EDC_ECC_STATUS, idx);
1304 addr = MC_INT_CAUSE;
1305 cnt_addr = MC_ECC_STATUS;
1308 v = t4_read_reg(adapter, addr) & MEM_INT_MASK;
1309 if (v & PERR_INT_CAUSE)
1310 dev_alert(adapter->pdev_dev, "%s FIFO parity error\n",
1312 if (v & ECC_CE_INT_CAUSE) {
1313 u32 cnt = ECC_CECNT_GET(t4_read_reg(adapter, cnt_addr));
1315 t4_write_reg(adapter, cnt_addr, ECC_CECNT_MASK);
1316 if (printk_ratelimit())
1317 dev_warn(adapter->pdev_dev,
1318 "%u %s correctable ECC data error%s\n",
1319 cnt, name[idx], cnt > 1 ? "s" : "");
1321 if (v & ECC_UE_INT_CAUSE)
1322 dev_alert(adapter->pdev_dev,
1323 "%s uncorrectable ECC data error\n", name[idx]);
1325 t4_write_reg(adapter, addr, v);
1326 if (v & (PERR_INT_CAUSE | ECC_UE_INT_CAUSE))
1327 t4_fatal_err(adapter);
1331 * MA interrupt handler.
1333 static void ma_intr_handler(struct adapter *adap)
1335 u32 v, status = t4_read_reg(adap, MA_INT_CAUSE);
1337 if (status & MEM_PERR_INT_CAUSE)
1338 dev_alert(adap->pdev_dev,
1339 "MA parity error, parity status %#x\n",
1340 t4_read_reg(adap, MA_PARITY_ERROR_STATUS));
1341 if (status & MEM_WRAP_INT_CAUSE) {
1342 v = t4_read_reg(adap, MA_INT_WRAP_STATUS);
1343 dev_alert(adap->pdev_dev, "MA address wrap-around error by "
1344 "client %u to address %#x\n",
1345 MEM_WRAP_CLIENT_NUM_GET(v),
1346 MEM_WRAP_ADDRESS_GET(v) << 4);
1348 t4_write_reg(adap, MA_INT_CAUSE, status);
1353 * SMB interrupt handler.
1355 static void smb_intr_handler(struct adapter *adap)
1357 static const struct intr_info smb_intr_info[] = {
1358 { MSTTXFIFOPARINT, "SMB master Tx FIFO parity error", -1, 1 },
1359 { MSTRXFIFOPARINT, "SMB master Rx FIFO parity error", -1, 1 },
1360 { SLVFIFOPARINT, "SMB slave FIFO parity error", -1, 1 },
1364 if (t4_handle_intr_status(adap, SMB_INT_CAUSE, smb_intr_info))
1369 * NC-SI interrupt handler.
1371 static void ncsi_intr_handler(struct adapter *adap)
1373 static const struct intr_info ncsi_intr_info[] = {
1374 { CIM_DM_PRTY_ERR, "NC-SI CIM parity error", -1, 1 },
1375 { MPS_DM_PRTY_ERR, "NC-SI MPS parity error", -1, 1 },
1376 { TXFIFO_PRTY_ERR, "NC-SI Tx FIFO parity error", -1, 1 },
1377 { RXFIFO_PRTY_ERR, "NC-SI Rx FIFO parity error", -1, 1 },
1381 if (t4_handle_intr_status(adap, NCSI_INT_CAUSE, ncsi_intr_info))
1386 * XGMAC interrupt handler.
1388 static void xgmac_intr_handler(struct adapter *adap, int port)
1390 u32 v = t4_read_reg(adap, PORT_REG(port, XGMAC_PORT_INT_CAUSE));
1392 v &= TXFIFO_PRTY_ERR | RXFIFO_PRTY_ERR;
1396 if (v & TXFIFO_PRTY_ERR)
1397 dev_alert(adap->pdev_dev, "XGMAC %d Tx FIFO parity error\n",
1399 if (v & RXFIFO_PRTY_ERR)
1400 dev_alert(adap->pdev_dev, "XGMAC %d Rx FIFO parity error\n",
1402 t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_INT_CAUSE), v);
1407 * PL interrupt handler.
1409 static void pl_intr_handler(struct adapter *adap)
1411 static const struct intr_info pl_intr_info[] = {
1412 { FATALPERR, "T4 fatal parity error", -1, 1 },
1413 { PERRVFID, "PL VFID_MAP parity error", -1, 1 },
1417 if (t4_handle_intr_status(adap, PL_PL_INT_CAUSE, pl_intr_info))
1421 #define PF_INTR_MASK (PFSW)
1422 #define GLBL_INTR_MASK (CIM | MPS | PL | PCIE | MC | EDC0 | \
1423 EDC1 | LE | TP | MA | PM_TX | PM_RX | ULP_RX | \
1424 CPL_SWITCH | SGE | ULP_TX)
1427 * t4_slow_intr_handler - control path interrupt handler
1428 * @adapter: the adapter
1430 * T4 interrupt handler for non-data global interrupt events, e.g., errors.
1431 * The designation 'slow' is because it involves register reads, while
1432 * data interrupts typically don't involve any MMIOs.
1434 int t4_slow_intr_handler(struct adapter *adapter)
1436 u32 cause = t4_read_reg(adapter, PL_INT_CAUSE);
1438 if (!(cause & GLBL_INTR_MASK))
1441 cim_intr_handler(adapter);
1443 mps_intr_handler(adapter);
1445 ncsi_intr_handler(adapter);
1447 pl_intr_handler(adapter);
1449 smb_intr_handler(adapter);
1451 xgmac_intr_handler(adapter, 0);
1453 xgmac_intr_handler(adapter, 1);
1454 if (cause & XGMAC_KR0)
1455 xgmac_intr_handler(adapter, 2);
1456 if (cause & XGMAC_KR1)
1457 xgmac_intr_handler(adapter, 3);
1459 pcie_intr_handler(adapter);
1461 mem_intr_handler(adapter, MEM_MC);
1463 mem_intr_handler(adapter, MEM_EDC0);
1465 mem_intr_handler(adapter, MEM_EDC1);
1467 le_intr_handler(adapter);
1469 tp_intr_handler(adapter);
1471 ma_intr_handler(adapter);
1473 pmtx_intr_handler(adapter);
1475 pmrx_intr_handler(adapter);
1477 ulprx_intr_handler(adapter);
1478 if (cause & CPL_SWITCH)
1479 cplsw_intr_handler(adapter);
1481 sge_intr_handler(adapter);
1483 ulptx_intr_handler(adapter);
1485 /* Clear the interrupts just processed for which we are the master. */
1486 t4_write_reg(adapter, PL_INT_CAUSE, cause & GLBL_INTR_MASK);
1487 (void) t4_read_reg(adapter, PL_INT_CAUSE); /* flush */
1492 * t4_intr_enable - enable interrupts
1493 * @adapter: the adapter whose interrupts should be enabled
1495 * Enable PF-specific interrupts for the calling function and the top-level
1496 * interrupt concentrator for global interrupts. Interrupts are already
1497 * enabled at each module, here we just enable the roots of the interrupt
1500 * Note: this function should be called only when the driver manages
1501 * non PF-specific interrupts from the various HW modules. Only one PCI
1502 * function at a time should be doing this.
1504 void t4_intr_enable(struct adapter *adapter)
1506 u32 pf = SOURCEPF_GET(t4_read_reg(adapter, PL_WHOAMI));
1508 t4_write_reg(adapter, SGE_INT_ENABLE3, ERR_CPL_EXCEED_IQE_SIZE |
1509 ERR_INVALID_CIDX_INC | ERR_CPL_OPCODE_0 |
1510 ERR_DROPPED_DB | ERR_DATA_CPL_ON_HIGH_QID1 |
1511 ERR_DATA_CPL_ON_HIGH_QID0 | ERR_BAD_DB_PIDX3 |
1512 ERR_BAD_DB_PIDX2 | ERR_BAD_DB_PIDX1 |
1513 ERR_BAD_DB_PIDX0 | ERR_ING_CTXT_PRIO |
1514 ERR_EGR_CTXT_PRIO | INGRESS_SIZE_ERR |
1516 t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE), PF_INTR_MASK);
1517 t4_set_reg_field(adapter, PL_INT_MAP0, 0, 1 << pf);
1521 * t4_intr_disable - disable interrupts
1522 * @adapter: the adapter whose interrupts should be disabled
1524 * Disable interrupts. We only disable the top-level interrupt
1525 * concentrators. The caller must be a PCI function managing global
1528 void t4_intr_disable(struct adapter *adapter)
1530 u32 pf = SOURCEPF_GET(t4_read_reg(adapter, PL_WHOAMI));
1532 t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE), 0);
1533 t4_set_reg_field(adapter, PL_INT_MAP0, 1 << pf, 0);
1537 * hash_mac_addr - return the hash value of a MAC address
1538 * @addr: the 48-bit Ethernet MAC address
1540 * Hashes a MAC address according to the hash function used by HW inexact
1541 * (hash) address matching.
1543 static int hash_mac_addr(const u8 *addr)
1545 u32 a = ((u32)addr[0] << 16) | ((u32)addr[1] << 8) | addr[2];
1546 u32 b = ((u32)addr[3] << 16) | ((u32)addr[4] << 8) | addr[5];
1554 * t4_config_rss_range - configure a portion of the RSS mapping table
1555 * @adapter: the adapter
1556 * @mbox: mbox to use for the FW command
1557 * @viid: virtual interface whose RSS subtable is to be written
1558 * @start: start entry in the table to write
1559 * @n: how many table entries to write
1560 * @rspq: values for the response queue lookup table
1561 * @nrspq: number of values in @rspq
1563 * Programs the selected part of the VI's RSS mapping table with the
1564 * provided values. If @nrspq < @n the supplied values are used repeatedly
1565 * until the full table range is populated.
1567 * The caller must ensure the values in @rspq are in the range allowed for
1570 int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid,
1571 int start, int n, const u16 *rspq, unsigned int nrspq)
1574 const u16 *rsp = rspq;
1575 const u16 *rsp_end = rspq + nrspq;
1576 struct fw_rss_ind_tbl_cmd cmd;
1578 memset(&cmd, 0, sizeof(cmd));
1579 cmd.op_to_viid = htonl(FW_CMD_OP(FW_RSS_IND_TBL_CMD) |
1580 FW_CMD_REQUEST | FW_CMD_WRITE |
1581 FW_RSS_IND_TBL_CMD_VIID(viid));
1582 cmd.retval_len16 = htonl(FW_LEN16(cmd));
1584 /* each fw_rss_ind_tbl_cmd takes up to 32 entries */
1586 int nq = min(n, 32);
1587 __be32 *qp = &cmd.iq0_to_iq2;
1589 cmd.niqid = htons(nq);
1590 cmd.startidx = htons(start);
1598 v = FW_RSS_IND_TBL_CMD_IQ0(*rsp);
1599 if (++rsp >= rsp_end)
1601 v |= FW_RSS_IND_TBL_CMD_IQ1(*rsp);
1602 if (++rsp >= rsp_end)
1604 v |= FW_RSS_IND_TBL_CMD_IQ2(*rsp);
1605 if (++rsp >= rsp_end)
1612 ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL);
1620 * t4_config_glbl_rss - configure the global RSS mode
1621 * @adapter: the adapter
1622 * @mbox: mbox to use for the FW command
1623 * @mode: global RSS mode
1624 * @flags: mode-specific flags
1626 * Sets the global RSS mode.
1628 int t4_config_glbl_rss(struct adapter *adapter, int mbox, unsigned int mode,
1631 struct fw_rss_glb_config_cmd c;
1633 memset(&c, 0, sizeof(c));
1634 c.op_to_write = htonl(FW_CMD_OP(FW_RSS_GLB_CONFIG_CMD) |
1635 FW_CMD_REQUEST | FW_CMD_WRITE);
1636 c.retval_len16 = htonl(FW_LEN16(c));
1637 if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL) {
1638 c.u.manual.mode_pkd = htonl(FW_RSS_GLB_CONFIG_CMD_MODE(mode));
1639 } else if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) {
1640 c.u.basicvirtual.mode_pkd =
1641 htonl(FW_RSS_GLB_CONFIG_CMD_MODE(mode));
1642 c.u.basicvirtual.synmapen_to_hashtoeplitz = htonl(flags);
1645 return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL);
1649 * t4_tp_get_tcp_stats - read TP's TCP MIB counters
1650 * @adap: the adapter
1651 * @v4: holds the TCP/IP counter values
1652 * @v6: holds the TCP/IPv6 counter values
1654 * Returns the values of TP's TCP/IP and TCP/IPv6 MIB counters.
1655 * Either @v4 or @v6 may be %NULL to skip the corresponding stats.
1657 void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4,
1658 struct tp_tcp_stats *v6)
1660 u32 val[TP_MIB_TCP_RXT_SEG_LO - TP_MIB_TCP_OUT_RST + 1];
1662 #define STAT_IDX(x) ((TP_MIB_TCP_##x) - TP_MIB_TCP_OUT_RST)
1663 #define STAT(x) val[STAT_IDX(x)]
1664 #define STAT64(x) (((u64)STAT(x##_HI) << 32) | STAT(x##_LO))
1667 t4_read_indirect(adap, TP_MIB_INDEX, TP_MIB_DATA, val,
1668 ARRAY_SIZE(val), TP_MIB_TCP_OUT_RST);
1669 v4->tcpOutRsts = STAT(OUT_RST);
1670 v4->tcpInSegs = STAT64(IN_SEG);
1671 v4->tcpOutSegs = STAT64(OUT_SEG);
1672 v4->tcpRetransSegs = STAT64(RXT_SEG);
1675 t4_read_indirect(adap, TP_MIB_INDEX, TP_MIB_DATA, val,
1676 ARRAY_SIZE(val), TP_MIB_TCP_V6OUT_RST);
1677 v6->tcpOutRsts = STAT(OUT_RST);
1678 v6->tcpInSegs = STAT64(IN_SEG);
1679 v6->tcpOutSegs = STAT64(OUT_SEG);
1680 v6->tcpRetransSegs = STAT64(RXT_SEG);
1688 * t4_read_mtu_tbl - returns the values in the HW path MTU table
1689 * @adap: the adapter
1690 * @mtus: where to store the MTU values
1691 * @mtu_log: where to store the MTU base-2 log (may be %NULL)
1693 * Reads the HW path MTU table.
1695 void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log)
1700 for (i = 0; i < NMTUS; ++i) {
1701 t4_write_reg(adap, TP_MTU_TABLE,
1702 MTUINDEX(0xff) | MTUVALUE(i));
1703 v = t4_read_reg(adap, TP_MTU_TABLE);
1704 mtus[i] = MTUVALUE_GET(v);
1706 mtu_log[i] = MTUWIDTH_GET(v);
1711 * init_cong_ctrl - initialize congestion control parameters
1712 * @a: the alpha values for congestion control
1713 * @b: the beta values for congestion control
1715 * Initialize the congestion control parameters.
1717 static void __devinit init_cong_ctrl(unsigned short *a, unsigned short *b)
1719 a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1;
1744 b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0;
1747 b[13] = b[14] = b[15] = b[16] = 3;
1748 b[17] = b[18] = b[19] = b[20] = b[21] = 4;
1749 b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5;
1754 /* The minimum additive increment value for the congestion control table */
1755 #define CC_MIN_INCR 2U
1758 * t4_load_mtus - write the MTU and congestion control HW tables
1759 * @adap: the adapter
1760 * @mtus: the values for the MTU table
1761 * @alpha: the values for the congestion control alpha parameter
1762 * @beta: the values for the congestion control beta parameter
1764 * Write the HW MTU table with the supplied MTUs and the high-speed
1765 * congestion control table with the supplied alpha, beta, and MTUs.
1766 * We write the two tables together because the additive increments
1767 * depend on the MTUs.
1769 void t4_load_mtus(struct adapter *adap, const unsigned short *mtus,
1770 const unsigned short *alpha, const unsigned short *beta)
1772 static const unsigned int avg_pkts[NCCTRL_WIN] = {
1773 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640,
1774 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480,
1775 28672, 40960, 57344, 81920, 114688, 163840, 229376
1780 for (i = 0; i < NMTUS; ++i) {
1781 unsigned int mtu = mtus[i];
1782 unsigned int log2 = fls(mtu);
1784 if (!(mtu & ((1 << log2) >> 2))) /* round */
1786 t4_write_reg(adap, TP_MTU_TABLE, MTUINDEX(i) |
1787 MTUWIDTH(log2) | MTUVALUE(mtu));
1789 for (w = 0; w < NCCTRL_WIN; ++w) {
1792 inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w],
1795 t4_write_reg(adap, TP_CCTRL_TABLE, (i << 21) |
1796 (w << 16) | (beta[w] << 13) | inc);
1802 * get_mps_bg_map - return the buffer groups associated with a port
1803 * @adap: the adapter
1804 * @idx: the port index
1806 * Returns a bitmap indicating which MPS buffer groups are associated
1807 * with the given port. Bit i is set if buffer group i is used by the
1810 static unsigned int get_mps_bg_map(struct adapter *adap, int idx)
1812 u32 n = NUMPORTS_GET(t4_read_reg(adap, MPS_CMN_CTL));
1815 return idx == 0 ? 0xf : 0;
1817 return idx < 2 ? (3 << (2 * idx)) : 0;
1822 * t4_get_port_stats - collect port statistics
1823 * @adap: the adapter
1824 * @idx: the port index
1825 * @p: the stats structure to fill
1827 * Collect statistics related to the given port from HW.
1829 void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p)
1831 u32 bgmap = get_mps_bg_map(adap, idx);
1833 #define GET_STAT(name) \
1834 t4_read_reg64(adap, PORT_REG(idx, MPS_PORT_STAT_##name##_L))
1835 #define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L)
1837 p->tx_octets = GET_STAT(TX_PORT_BYTES);
1838 p->tx_frames = GET_STAT(TX_PORT_FRAMES);
1839 p->tx_bcast_frames = GET_STAT(TX_PORT_BCAST);
1840 p->tx_mcast_frames = GET_STAT(TX_PORT_MCAST);
1841 p->tx_ucast_frames = GET_STAT(TX_PORT_UCAST);
1842 p->tx_error_frames = GET_STAT(TX_PORT_ERROR);
1843 p->tx_frames_64 = GET_STAT(TX_PORT_64B);
1844 p->tx_frames_65_127 = GET_STAT(TX_PORT_65B_127B);
1845 p->tx_frames_128_255 = GET_STAT(TX_PORT_128B_255B);
1846 p->tx_frames_256_511 = GET_STAT(TX_PORT_256B_511B);
1847 p->tx_frames_512_1023 = GET_STAT(TX_PORT_512B_1023B);
1848 p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B);
1849 p->tx_frames_1519_max = GET_STAT(TX_PORT_1519B_MAX);
1850 p->tx_drop = GET_STAT(TX_PORT_DROP);
1851 p->tx_pause = GET_STAT(TX_PORT_PAUSE);
1852 p->tx_ppp0 = GET_STAT(TX_PORT_PPP0);
1853 p->tx_ppp1 = GET_STAT(TX_PORT_PPP1);
1854 p->tx_ppp2 = GET_STAT(TX_PORT_PPP2);
1855 p->tx_ppp3 = GET_STAT(TX_PORT_PPP3);
1856 p->tx_ppp4 = GET_STAT(TX_PORT_PPP4);
1857 p->tx_ppp5 = GET_STAT(TX_PORT_PPP5);
1858 p->tx_ppp6 = GET_STAT(TX_PORT_PPP6);
1859 p->tx_ppp7 = GET_STAT(TX_PORT_PPP7);
1861 p->rx_octets = GET_STAT(RX_PORT_BYTES);
1862 p->rx_frames = GET_STAT(RX_PORT_FRAMES);
1863 p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST);
1864 p->rx_mcast_frames = GET_STAT(RX_PORT_MCAST);
1865 p->rx_ucast_frames = GET_STAT(RX_PORT_UCAST);
1866 p->rx_too_long = GET_STAT(RX_PORT_MTU_ERROR);
1867 p->rx_jabber = GET_STAT(RX_PORT_MTU_CRC_ERROR);
1868 p->rx_fcs_err = GET_STAT(RX_PORT_CRC_ERROR);
1869 p->rx_len_err = GET_STAT(RX_PORT_LEN_ERROR);
1870 p->rx_symbol_err = GET_STAT(RX_PORT_SYM_ERROR);
1871 p->rx_runt = GET_STAT(RX_PORT_LESS_64B);
1872 p->rx_frames_64 = GET_STAT(RX_PORT_64B);
1873 p->rx_frames_65_127 = GET_STAT(RX_PORT_65B_127B);
1874 p->rx_frames_128_255 = GET_STAT(RX_PORT_128B_255B);
1875 p->rx_frames_256_511 = GET_STAT(RX_PORT_256B_511B);
1876 p->rx_frames_512_1023 = GET_STAT(RX_PORT_512B_1023B);
1877 p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B);
1878 p->rx_frames_1519_max = GET_STAT(RX_PORT_1519B_MAX);
1879 p->rx_pause = GET_STAT(RX_PORT_PAUSE);
1880 p->rx_ppp0 = GET_STAT(RX_PORT_PPP0);
1881 p->rx_ppp1 = GET_STAT(RX_PORT_PPP1);
1882 p->rx_ppp2 = GET_STAT(RX_PORT_PPP2);
1883 p->rx_ppp3 = GET_STAT(RX_PORT_PPP3);
1884 p->rx_ppp4 = GET_STAT(RX_PORT_PPP4);
1885 p->rx_ppp5 = GET_STAT(RX_PORT_PPP5);
1886 p->rx_ppp6 = GET_STAT(RX_PORT_PPP6);
1887 p->rx_ppp7 = GET_STAT(RX_PORT_PPP7);
1889 p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0;
1890 p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0;
1891 p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0;
1892 p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0;
1893 p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0;
1894 p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0;
1895 p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0;
1896 p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0;
1903 * t4_wol_magic_enable - enable/disable magic packet WoL
1904 * @adap: the adapter
1905 * @port: the physical port index
1906 * @addr: MAC address expected in magic packets, %NULL to disable
1908 * Enables/disables magic packet wake-on-LAN for the selected port.
1910 void t4_wol_magic_enable(struct adapter *adap, unsigned int port,
1914 t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_MAGIC_MACID_LO),
1915 (addr[2] << 24) | (addr[3] << 16) |
1916 (addr[4] << 8) | addr[5]);
1917 t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_MAGIC_MACID_HI),
1918 (addr[0] << 8) | addr[1]);
1920 t4_set_reg_field(adap, PORT_REG(port, XGMAC_PORT_CFG2), MAGICEN,
1921 addr ? MAGICEN : 0);
1925 * t4_wol_pat_enable - enable/disable pattern-based WoL
1926 * @adap: the adapter
1927 * @port: the physical port index
1928 * @map: bitmap of which HW pattern filters to set
1929 * @mask0: byte mask for bytes 0-63 of a packet
1930 * @mask1: byte mask for bytes 64-127 of a packet
1931 * @crc: Ethernet CRC for selected bytes
1932 * @enable: enable/disable switch
1934 * Sets the pattern filters indicated in @map to mask out the bytes
1935 * specified in @mask0/@mask1 in received packets and compare the CRC of
1936 * the resulting packet against @crc. If @enable is %true pattern-based
1937 * WoL is enabled, otherwise disabled.
1939 int t4_wol_pat_enable(struct adapter *adap, unsigned int port, unsigned int map,
1940 u64 mask0, u64 mask1, unsigned int crc, bool enable)
1945 t4_set_reg_field(adap, PORT_REG(port, XGMAC_PORT_CFG2),
1952 #define EPIO_REG(name) PORT_REG(port, XGMAC_PORT_EPIO_##name)
1954 t4_write_reg(adap, EPIO_REG(DATA1), mask0 >> 32);
1955 t4_write_reg(adap, EPIO_REG(DATA2), mask1);
1956 t4_write_reg(adap, EPIO_REG(DATA3), mask1 >> 32);
1958 for (i = 0; i < NWOL_PAT; i++, map >>= 1) {
1962 /* write byte masks */
1963 t4_write_reg(adap, EPIO_REG(DATA0), mask0);
1964 t4_write_reg(adap, EPIO_REG(OP), ADDRESS(i) | EPIOWR);
1965 t4_read_reg(adap, EPIO_REG(OP)); /* flush */
1966 if (t4_read_reg(adap, EPIO_REG(OP)) & BUSY)
1970 t4_write_reg(adap, EPIO_REG(DATA0), crc);
1971 t4_write_reg(adap, EPIO_REG(OP), ADDRESS(i + 32) | EPIOWR);
1972 t4_read_reg(adap, EPIO_REG(OP)); /* flush */
1973 if (t4_read_reg(adap, EPIO_REG(OP)) & BUSY)
1978 t4_set_reg_field(adap, PORT_REG(port, XGMAC_PORT_CFG2), 0, PATEN);
1982 #define INIT_CMD(var, cmd, rd_wr) do { \
1983 (var).op_to_write = htonl(FW_CMD_OP(FW_##cmd##_CMD) | \
1984 FW_CMD_REQUEST | FW_CMD_##rd_wr); \
1985 (var).retval_len16 = htonl(FW_LEN16(var)); \
1989 * t4_mdio_rd - read a PHY register through MDIO
1990 * @adap: the adapter
1991 * @mbox: mailbox to use for the FW command
1992 * @phy_addr: the PHY address
1993 * @mmd: the PHY MMD to access (0 for clause 22 PHYs)
1994 * @reg: the register to read
1995 * @valp: where to store the value
1997 * Issues a FW command through the given mailbox to read a PHY register.
1999 int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
2000 unsigned int mmd, unsigned int reg, u16 *valp)
2003 struct fw_ldst_cmd c;
2005 memset(&c, 0, sizeof(c));
2006 c.op_to_addrspace = htonl(FW_CMD_OP(FW_LDST_CMD) | FW_CMD_REQUEST |
2007 FW_CMD_READ | FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_MDIO));
2008 c.cycles_to_len16 = htonl(FW_LEN16(c));
2009 c.u.mdio.paddr_mmd = htons(FW_LDST_CMD_PADDR(phy_addr) |
2010 FW_LDST_CMD_MMD(mmd));
2011 c.u.mdio.raddr = htons(reg);
2013 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
2015 *valp = ntohs(c.u.mdio.rval);
2020 * t4_mdio_wr - write a PHY register through MDIO
2021 * @adap: the adapter
2022 * @mbox: mailbox to use for the FW command
2023 * @phy_addr: the PHY address
2024 * @mmd: the PHY MMD to access (0 for clause 22 PHYs)
2025 * @reg: the register to write
2026 * @valp: value to write
2028 * Issues a FW command through the given mailbox to write a PHY register.
2030 int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
2031 unsigned int mmd, unsigned int reg, u16 val)
2033 struct fw_ldst_cmd c;
2035 memset(&c, 0, sizeof(c));
2036 c.op_to_addrspace = htonl(FW_CMD_OP(FW_LDST_CMD) | FW_CMD_REQUEST |
2037 FW_CMD_WRITE | FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_MDIO));
2038 c.cycles_to_len16 = htonl(FW_LEN16(c));
2039 c.u.mdio.paddr_mmd = htons(FW_LDST_CMD_PADDR(phy_addr) |
2040 FW_LDST_CMD_MMD(mmd));
2041 c.u.mdio.raddr = htons(reg);
2042 c.u.mdio.rval = htons(val);
2044 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
2048 * t4_fw_hello - establish communication with FW
2049 * @adap: the adapter
2050 * @mbox: mailbox to use for the FW command
2051 * @evt_mbox: mailbox to receive async FW events
2052 * @master: specifies the caller's willingness to be the device master
2053 * @state: returns the current device state
2055 * Issues a command to establish communication with FW.
2057 int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox,
2058 enum dev_master master, enum dev_state *state)
2061 struct fw_hello_cmd c;
2063 INIT_CMD(c, HELLO, WRITE);
2064 c.err_to_mbasyncnot = htonl(
2065 FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) |
2066 FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) |
2067 FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : 0xff) |
2068 FW_HELLO_CMD_MBASYNCNOT(evt_mbox));
2070 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
2071 if (ret == 0 && state) {
2072 u32 v = ntohl(c.err_to_mbasyncnot);
2073 if (v & FW_HELLO_CMD_INIT)
2074 *state = DEV_STATE_INIT;
2075 else if (v & FW_HELLO_CMD_ERR)
2076 *state = DEV_STATE_ERR;
2078 *state = DEV_STATE_UNINIT;
2084 * t4_fw_bye - end communication with FW
2085 * @adap: the adapter
2086 * @mbox: mailbox to use for the FW command
2088 * Issues a command to terminate communication with FW.
2090 int t4_fw_bye(struct adapter *adap, unsigned int mbox)
2092 struct fw_bye_cmd c;
2094 INIT_CMD(c, BYE, WRITE);
2095 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
2099 * t4_init_cmd - ask FW to initialize the device
2100 * @adap: the adapter
2101 * @mbox: mailbox to use for the FW command
2103 * Issues a command to FW to partially initialize the device. This
2104 * performs initialization that generally doesn't depend on user input.
2106 int t4_early_init(struct adapter *adap, unsigned int mbox)
2108 struct fw_initialize_cmd c;
2110 INIT_CMD(c, INITIALIZE, WRITE);
2111 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
2115 * t4_fw_reset - issue a reset to FW
2116 * @adap: the adapter
2117 * @mbox: mailbox to use for the FW command
2118 * @reset: specifies the type of reset to perform
2120 * Issues a reset command of the specified type to FW.
2122 int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset)
2124 struct fw_reset_cmd c;
2126 INIT_CMD(c, RESET, WRITE);
2127 c.val = htonl(reset);
2128 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
2132 * t4_query_params - query FW or device parameters
2133 * @adap: the adapter
2134 * @mbox: mailbox to use for the FW command
2137 * @nparams: the number of parameters
2138 * @params: the parameter names
2139 * @val: the parameter values
2141 * Reads the value of FW or device parameters. Up to 7 parameters can be
2144 int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
2145 unsigned int vf, unsigned int nparams, const u32 *params,
2149 struct fw_params_cmd c;
2150 __be32 *p = &c.param[0].mnem;
2155 memset(&c, 0, sizeof(c));
2156 c.op_to_vfn = htonl(FW_CMD_OP(FW_PARAMS_CMD) | FW_CMD_REQUEST |
2157 FW_CMD_READ | FW_PARAMS_CMD_PFN(pf) |
2158 FW_PARAMS_CMD_VFN(vf));
2159 c.retval_len16 = htonl(FW_LEN16(c));
2160 for (i = 0; i < nparams; i++, p += 2)
2161 *p = htonl(*params++);
2163 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
2165 for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2)
2171 * t4_set_params - sets FW or device parameters
2172 * @adap: the adapter
2173 * @mbox: mailbox to use for the FW command
2176 * @nparams: the number of parameters
2177 * @params: the parameter names
2178 * @val: the parameter values
2180 * Sets the value of FW or device parameters. Up to 7 parameters can be
2181 * specified at once.
2183 int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
2184 unsigned int vf, unsigned int nparams, const u32 *params,
2187 struct fw_params_cmd c;
2188 __be32 *p = &c.param[0].mnem;
2193 memset(&c, 0, sizeof(c));
2194 c.op_to_vfn = htonl(FW_CMD_OP(FW_PARAMS_CMD) | FW_CMD_REQUEST |
2195 FW_CMD_WRITE | FW_PARAMS_CMD_PFN(pf) |
2196 FW_PARAMS_CMD_VFN(vf));
2197 c.retval_len16 = htonl(FW_LEN16(c));
2199 *p++ = htonl(*params++);
2200 *p++ = htonl(*val++);
2203 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
2207 * t4_cfg_pfvf - configure PF/VF resource limits
2208 * @adap: the adapter
2209 * @mbox: mailbox to use for the FW command
2210 * @pf: the PF being configured
2211 * @vf: the VF being configured
2212 * @txq: the max number of egress queues
2213 * @txq_eth_ctrl: the max number of egress Ethernet or control queues
2214 * @rxqi: the max number of interrupt-capable ingress queues
2215 * @rxq: the max number of interruptless ingress queues
2216 * @tc: the PCI traffic class
2217 * @vi: the max number of virtual interfaces
2218 * @cmask: the channel access rights mask for the PF/VF
2219 * @pmask: the port access rights mask for the PF/VF
2220 * @nexact: the maximum number of exact MPS filters
2221 * @rcaps: read capabilities
2222 * @wxcaps: write/execute capabilities
2224 * Configures resource limits and capabilities for a physical or virtual
2227 int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf,
2228 unsigned int vf, unsigned int txq, unsigned int txq_eth_ctrl,
2229 unsigned int rxqi, unsigned int rxq, unsigned int tc,
2230 unsigned int vi, unsigned int cmask, unsigned int pmask,
2231 unsigned int nexact, unsigned int rcaps, unsigned int wxcaps)
2233 struct fw_pfvf_cmd c;
2235 memset(&c, 0, sizeof(c));
2236 c.op_to_vfn = htonl(FW_CMD_OP(FW_PFVF_CMD) | FW_CMD_REQUEST |
2237 FW_CMD_WRITE | FW_PFVF_CMD_PFN(pf) |
2238 FW_PFVF_CMD_VFN(vf));
2239 c.retval_len16 = htonl(FW_LEN16(c));
2240 c.niqflint_niq = htonl(FW_PFVF_CMD_NIQFLINT(rxqi) |
2241 FW_PFVF_CMD_NIQ(rxq));
2242 c.type_to_neq = htonl(FW_PFVF_CMD_CMASK(cmask) |
2243 FW_PFVF_CMD_PMASK(pmask) |
2244 FW_PFVF_CMD_NEQ(txq));
2245 c.tc_to_nexactf = htonl(FW_PFVF_CMD_TC(tc) | FW_PFVF_CMD_NVI(vi) |
2246 FW_PFVF_CMD_NEXACTF(nexact));
2247 c.r_caps_to_nethctrl = htonl(FW_PFVF_CMD_R_CAPS(rcaps) |
2248 FW_PFVF_CMD_WX_CAPS(wxcaps) |
2249 FW_PFVF_CMD_NETHCTRL(txq_eth_ctrl));
2250 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
2254 * t4_alloc_vi - allocate a virtual interface
2255 * @adap: the adapter
2256 * @mbox: mailbox to use for the FW command
2257 * @port: physical port associated with the VI
2258 * @pf: the PF owning the VI
2259 * @vf: the VF owning the VI
2260 * @nmac: number of MAC addresses needed (1 to 5)
2261 * @mac: the MAC addresses of the VI
2262 * @rss_size: size of RSS table slice associated with this VI
2264 * Allocates a virtual interface for the given physical port. If @mac is
2265 * not %NULL it contains the MAC addresses of the VI as assigned by FW.
2266 * @mac should be large enough to hold @nmac Ethernet addresses, they are
2267 * stored consecutively so the space needed is @nmac * 6 bytes.
2268 * Returns a negative error number or the non-negative VI id.
2270 int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port,
2271 unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac,
2272 unsigned int *rss_size)
2277 memset(&c, 0, sizeof(c));
2278 c.op_to_vfn = htonl(FW_CMD_OP(FW_VI_CMD) | FW_CMD_REQUEST |
2279 FW_CMD_WRITE | FW_CMD_EXEC |
2280 FW_VI_CMD_PFN(pf) | FW_VI_CMD_VFN(vf));
2281 c.alloc_to_len16 = htonl(FW_VI_CMD_ALLOC | FW_LEN16(c));
2282 c.portid_pkd = FW_VI_CMD_PORTID(port);
2285 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
2290 memcpy(mac, c.mac, sizeof(c.mac));
2293 memcpy(mac + 24, c.nmac3, sizeof(c.nmac3));
2295 memcpy(mac + 18, c.nmac2, sizeof(c.nmac2));
2297 memcpy(mac + 12, c.nmac1, sizeof(c.nmac1));
2299 memcpy(mac + 6, c.nmac0, sizeof(c.nmac0));
2303 *rss_size = FW_VI_CMD_RSSSIZE_GET(ntohs(c.rsssize_pkd));
2304 return FW_VI_CMD_VIID_GET(ntohs(c.type_viid));
2308 * t4_set_rxmode - set Rx properties of a virtual interface
2309 * @adap: the adapter
2310 * @mbox: mailbox to use for the FW command
2312 * @mtu: the new MTU or -1
2313 * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change
2314 * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change
2315 * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change
2316 * @vlanex: 1 to enable HW VLAN extraction, 0 to disable it, -1 no change
2317 * @sleep_ok: if true we may sleep while awaiting command completion
2319 * Sets Rx properties of a virtual interface.
2321 int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid,
2322 int mtu, int promisc, int all_multi, int bcast, int vlanex,
2325 struct fw_vi_rxmode_cmd c;
2327 /* convert to FW values */
2329 mtu = FW_RXMODE_MTU_NO_CHG;
2331 promisc = FW_VI_RXMODE_CMD_PROMISCEN_MASK;
2333 all_multi = FW_VI_RXMODE_CMD_ALLMULTIEN_MASK;
2335 bcast = FW_VI_RXMODE_CMD_BROADCASTEN_MASK;
2337 vlanex = FW_VI_RXMODE_CMD_VLANEXEN_MASK;
2339 memset(&c, 0, sizeof(c));
2340 c.op_to_viid = htonl(FW_CMD_OP(FW_VI_RXMODE_CMD) | FW_CMD_REQUEST |
2341 FW_CMD_WRITE | FW_VI_RXMODE_CMD_VIID(viid));
2342 c.retval_len16 = htonl(FW_LEN16(c));
2343 c.mtu_to_vlanexen = htonl(FW_VI_RXMODE_CMD_MTU(mtu) |
2344 FW_VI_RXMODE_CMD_PROMISCEN(promisc) |
2345 FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) |
2346 FW_VI_RXMODE_CMD_BROADCASTEN(bcast) |
2347 FW_VI_RXMODE_CMD_VLANEXEN(vlanex));
2348 return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok);
2352 * t4_alloc_mac_filt - allocates exact-match filters for MAC addresses
2353 * @adap: the adapter
2354 * @mbox: mailbox to use for the FW command
2356 * @free: if true any existing filters for this VI id are first removed
2357 * @naddr: the number of MAC addresses to allocate filters for (up to 7)
2358 * @addr: the MAC address(es)
2359 * @idx: where to store the index of each allocated filter
2360 * @hash: pointer to hash address filter bitmap
2361 * @sleep_ok: call is allowed to sleep
2363 * Allocates an exact-match filter for each of the supplied addresses and
2364 * sets it to the corresponding address. If @idx is not %NULL it should
2365 * have at least @naddr entries, each of which will be set to the index of
2366 * the filter allocated for the corresponding MAC address. If a filter
2367 * could not be allocated for an address its index is set to 0xffff.
2368 * If @hash is not %NULL addresses that fail to allocate an exact filter
2369 * are hashed and update the hash filter bitmap pointed at by @hash.
2371 * Returns a negative error number or the number of filters allocated.
2373 int t4_alloc_mac_filt(struct adapter *adap, unsigned int mbox,
2374 unsigned int viid, bool free, unsigned int naddr,
2375 const u8 **addr, u16 *idx, u64 *hash, bool sleep_ok)
2378 struct fw_vi_mac_cmd c;
2379 struct fw_vi_mac_exact *p;
2384 memset(&c, 0, sizeof(c));
2385 c.op_to_viid = htonl(FW_CMD_OP(FW_VI_MAC_CMD) | FW_CMD_REQUEST |
2386 FW_CMD_WRITE | (free ? FW_CMD_EXEC : 0) |
2387 FW_VI_MAC_CMD_VIID(viid));
2388 c.freemacs_to_len16 = htonl(FW_VI_MAC_CMD_FREEMACS(free) |
2389 FW_CMD_LEN16((naddr + 2) / 2));
2391 for (i = 0, p = c.u.exact; i < naddr; i++, p++) {
2392 p->valid_to_idx = htons(FW_VI_MAC_CMD_VALID |
2393 FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
2394 memcpy(p->macaddr, addr[i], sizeof(p->macaddr));
2397 ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok);
2401 for (i = 0, p = c.u.exact; i < naddr; i++, p++) {
2402 u16 index = FW_VI_MAC_CMD_IDX_GET(ntohs(p->valid_to_idx));
2405 idx[i] = index >= NEXACT_MAC ? 0xffff : index;
2406 if (index < NEXACT_MAC)
2409 *hash |= (1ULL << hash_mac_addr(addr[i]));
2415 * t4_change_mac - modifies the exact-match filter for a MAC address
2416 * @adap: the adapter
2417 * @mbox: mailbox to use for the FW command
2419 * @idx: index of existing filter for old value of MAC address, or -1
2420 * @addr: the new MAC address value
2421 * @persist: whether a new MAC allocation should be persistent
2422 * @add_smt: if true also add the address to the HW SMT
2424 * Modifies an exact-match filter and sets it to the new MAC address.
2425 * Note that in general it is not possible to modify the value of a given
2426 * filter so the generic way to modify an address filter is to free the one
2427 * being used by the old address value and allocate a new filter for the
2428 * new address value. @idx can be -1 if the address is a new addition.
2430 * Returns a negative error number or the index of the filter with the new
2433 int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid,
2434 int idx, const u8 *addr, bool persist, bool add_smt)
2437 struct fw_vi_mac_cmd c;
2438 struct fw_vi_mac_exact *p = c.u.exact;
2440 if (idx < 0) /* new allocation */
2441 idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC;
2442 mode = add_smt ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY;
2444 memset(&c, 0, sizeof(c));
2445 c.op_to_viid = htonl(FW_CMD_OP(FW_VI_MAC_CMD) | FW_CMD_REQUEST |
2446 FW_CMD_WRITE | FW_VI_MAC_CMD_VIID(viid));
2447 c.freemacs_to_len16 = htonl(FW_CMD_LEN16(1));
2448 p->valid_to_idx = htons(FW_VI_MAC_CMD_VALID |
2449 FW_VI_MAC_CMD_SMAC_RESULT(mode) |
2450 FW_VI_MAC_CMD_IDX(idx));
2451 memcpy(p->macaddr, addr, sizeof(p->macaddr));
2453 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
2455 ret = FW_VI_MAC_CMD_IDX_GET(ntohs(p->valid_to_idx));
2456 if (ret >= NEXACT_MAC)
2463 * t4_set_addr_hash - program the MAC inexact-match hash filter
2464 * @adap: the adapter
2465 * @mbox: mailbox to use for the FW command
2467 * @ucast: whether the hash filter should also match unicast addresses
2468 * @vec: the value to be written to the hash filter
2469 * @sleep_ok: call is allowed to sleep
2471 * Sets the 64-bit inexact-match hash filter for a virtual interface.
2473 int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid,
2474 bool ucast, u64 vec, bool sleep_ok)
2476 struct fw_vi_mac_cmd c;
2478 memset(&c, 0, sizeof(c));
2479 c.op_to_viid = htonl(FW_CMD_OP(FW_VI_MAC_CMD) | FW_CMD_REQUEST |
2480 FW_CMD_WRITE | FW_VI_ENABLE_CMD_VIID(viid));
2481 c.freemacs_to_len16 = htonl(FW_VI_MAC_CMD_HASHVECEN |
2482 FW_VI_MAC_CMD_HASHUNIEN(ucast) |
2484 c.u.hash.hashvec = cpu_to_be64(vec);
2485 return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok);
2489 * t4_enable_vi - enable/disable a virtual interface
2490 * @adap: the adapter
2491 * @mbox: mailbox to use for the FW command
2493 * @rx_en: 1=enable Rx, 0=disable Rx
2494 * @tx_en: 1=enable Tx, 0=disable Tx
2496 * Enables/disables a virtual interface.
2498 int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
2499 bool rx_en, bool tx_en)
2501 struct fw_vi_enable_cmd c;
2503 memset(&c, 0, sizeof(c));
2504 c.op_to_viid = htonl(FW_CMD_OP(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST |
2505 FW_CMD_EXEC | FW_VI_ENABLE_CMD_VIID(viid));
2506 c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_IEN(rx_en) |
2507 FW_VI_ENABLE_CMD_EEN(tx_en) | FW_LEN16(c));
2508 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
2512 * t4_identify_port - identify a VI's port by blinking its LED
2513 * @adap: the adapter
2514 * @mbox: mailbox to use for the FW command
2516 * @nblinks: how many times to blink LED at 2.5 Hz
2518 * Identifies a VI's port by blinking its LED.
2520 int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid,
2521 unsigned int nblinks)
2523 struct fw_vi_enable_cmd c;
2525 c.op_to_viid = htonl(FW_CMD_OP(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST |
2526 FW_CMD_EXEC | FW_VI_ENABLE_CMD_VIID(viid));
2527 c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_LED | FW_LEN16(c));
2528 c.blinkdur = htons(nblinks);
2529 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
2533 * t4_iq_free - free an ingress queue and its FLs
2534 * @adap: the adapter
2535 * @mbox: mailbox to use for the FW command
2536 * @pf: the PF owning the queues
2537 * @vf: the VF owning the queues
2538 * @iqtype: the ingress queue type
2539 * @iqid: ingress queue id
2540 * @fl0id: FL0 queue id or 0xffff if no attached FL0
2541 * @fl1id: FL1 queue id or 0xffff if no attached FL1
2543 * Frees an ingress queue and its associated FLs, if any.
2545 int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
2546 unsigned int vf, unsigned int iqtype, unsigned int iqid,
2547 unsigned int fl0id, unsigned int fl1id)
2551 memset(&c, 0, sizeof(c));
2552 c.op_to_vfn = htonl(FW_CMD_OP(FW_IQ_CMD) | FW_CMD_REQUEST |
2553 FW_CMD_EXEC | FW_IQ_CMD_PFN(pf) |
2555 c.alloc_to_len16 = htonl(FW_IQ_CMD_FREE | FW_LEN16(c));
2556 c.type_to_iqandstindex = htonl(FW_IQ_CMD_TYPE(iqtype));
2557 c.iqid = htons(iqid);
2558 c.fl0id = htons(fl0id);
2559 c.fl1id = htons(fl1id);
2560 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
2564 * t4_eth_eq_free - free an Ethernet egress queue
2565 * @adap: the adapter
2566 * @mbox: mailbox to use for the FW command
2567 * @pf: the PF owning the queue
2568 * @vf: the VF owning the queue
2569 * @eqid: egress queue id
2571 * Frees an Ethernet egress queue.
2573 int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
2574 unsigned int vf, unsigned int eqid)
2576 struct fw_eq_eth_cmd c;
2578 memset(&c, 0, sizeof(c));
2579 c.op_to_vfn = htonl(FW_CMD_OP(FW_EQ_ETH_CMD) | FW_CMD_REQUEST |
2580 FW_CMD_EXEC | FW_EQ_ETH_CMD_PFN(pf) |
2581 FW_EQ_ETH_CMD_VFN(vf));
2582 c.alloc_to_len16 = htonl(FW_EQ_ETH_CMD_FREE | FW_LEN16(c));
2583 c.eqid_pkd = htonl(FW_EQ_ETH_CMD_EQID(eqid));
2584 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
2588 * t4_ctrl_eq_free - free a control egress queue
2589 * @adap: the adapter
2590 * @mbox: mailbox to use for the FW command
2591 * @pf: the PF owning the queue
2592 * @vf: the VF owning the queue
2593 * @eqid: egress queue id
2595 * Frees a control egress queue.
2597 int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
2598 unsigned int vf, unsigned int eqid)
2600 struct fw_eq_ctrl_cmd c;
2602 memset(&c, 0, sizeof(c));
2603 c.op_to_vfn = htonl(FW_CMD_OP(FW_EQ_CTRL_CMD) | FW_CMD_REQUEST |
2604 FW_CMD_EXEC | FW_EQ_CTRL_CMD_PFN(pf) |
2605 FW_EQ_CTRL_CMD_VFN(vf));
2606 c.alloc_to_len16 = htonl(FW_EQ_CTRL_CMD_FREE | FW_LEN16(c));
2607 c.cmpliqid_eqid = htonl(FW_EQ_CTRL_CMD_EQID(eqid));
2608 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
2612 * t4_ofld_eq_free - free an offload egress queue
2613 * @adap: the adapter
2614 * @mbox: mailbox to use for the FW command
2615 * @pf: the PF owning the queue
2616 * @vf: the VF owning the queue
2617 * @eqid: egress queue id
2619 * Frees a control egress queue.
2621 int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
2622 unsigned int vf, unsigned int eqid)
2624 struct fw_eq_ofld_cmd c;
2626 memset(&c, 0, sizeof(c));
2627 c.op_to_vfn = htonl(FW_CMD_OP(FW_EQ_OFLD_CMD) | FW_CMD_REQUEST |
2628 FW_CMD_EXEC | FW_EQ_OFLD_CMD_PFN(pf) |
2629 FW_EQ_OFLD_CMD_VFN(vf));
2630 c.alloc_to_len16 = htonl(FW_EQ_OFLD_CMD_FREE | FW_LEN16(c));
2631 c.eqid_pkd = htonl(FW_EQ_OFLD_CMD_EQID(eqid));
2632 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
2636 * t4_handle_fw_rpl - process a FW reply message
2637 * @adap: the adapter
2638 * @rpl: start of the FW message
2640 * Processes a FW message, such as link state change messages.
2642 int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
2644 u8 opcode = *(const u8 *)rpl;
2646 if (opcode == FW_PORT_CMD) { /* link/module state change message */
2647 int speed = 0, fc = 0;
2648 const struct fw_port_cmd *p = (void *)rpl;
2649 int chan = FW_PORT_CMD_PORTID_GET(ntohl(p->op_to_portid));
2650 int port = adap->chan_map[chan];
2651 struct port_info *pi = adap2pinfo(adap, port);
2652 struct link_config *lc = &pi->link_cfg;
2653 u32 stat = ntohl(p->u.info.lstatus_to_modtype);
2654 int link_ok = (stat & FW_PORT_CMD_LSTATUS) != 0;
2655 u32 mod = FW_PORT_CMD_MODTYPE_GET(stat);
2657 if (stat & FW_PORT_CMD_RXPAUSE)
2659 if (stat & FW_PORT_CMD_TXPAUSE)
2661 if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M))
2663 else if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G))
2665 else if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
2666 speed = SPEED_10000;
2668 if (link_ok != lc->link_ok || speed != lc->speed ||
2669 fc != lc->fc) { /* something changed */
2670 lc->link_ok = link_ok;
2673 t4_os_link_changed(adap, port, link_ok);
2675 if (mod != pi->mod_type) {
2677 t4_os_portmod_changed(adap, port);
2683 static void __devinit get_pci_mode(struct adapter *adapter,
2684 struct pci_params *p)
2687 u32 pcie_cap = pci_pcie_cap(adapter->pdev);
2690 pci_read_config_word(adapter->pdev, pcie_cap + PCI_EXP_LNKSTA,
2692 p->speed = val & PCI_EXP_LNKSTA_CLS;
2693 p->width = (val & PCI_EXP_LNKSTA_NLW) >> 4;
2698 * init_link_config - initialize a link's SW state
2699 * @lc: structure holding the link state
2700 * @caps: link capabilities
2702 * Initializes the SW state maintained for each link, including the link's
2703 * capabilities and default speed/flow-control/autonegotiation settings.
2705 static void __devinit init_link_config(struct link_config *lc,
2708 lc->supported = caps;
2709 lc->requested_speed = 0;
2711 lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
2712 if (lc->supported & FW_PORT_CAP_ANEG) {
2713 lc->advertising = lc->supported & ADVERT_MASK;
2714 lc->autoneg = AUTONEG_ENABLE;
2715 lc->requested_fc |= PAUSE_AUTONEG;
2717 lc->advertising = 0;
2718 lc->autoneg = AUTONEG_DISABLE;
2722 int t4_wait_dev_ready(struct adapter *adap)
2724 if (t4_read_reg(adap, PL_WHOAMI) != 0xffffffff)
2727 return t4_read_reg(adap, PL_WHOAMI) != 0xffffffff ? 0 : -EIO;
2730 static int __devinit get_flash_params(struct adapter *adap)
2735 ret = sf1_write(adap, 1, 1, 0, SF_RD_ID);
2737 ret = sf1_read(adap, 3, 0, 1, &info);
2738 t4_write_reg(adap, SF_OP, 0); /* unlock SF */
2742 if ((info & 0xff) != 0x20) /* not a Numonix flash */
2744 info >>= 16; /* log2 of size */
2745 if (info >= 0x14 && info < 0x18)
2746 adap->params.sf_nsec = 1 << (info - 16);
2747 else if (info == 0x18)
2748 adap->params.sf_nsec = 64;
2751 adap->params.sf_size = 1 << info;
2752 adap->params.sf_fw_start =
2753 t4_read_reg(adap, CIM_BOOT_CFG) & BOOTADDR_MASK;
2758 * t4_prep_adapter - prepare SW and HW for operation
2759 * @adapter: the adapter
2760 * @reset: if true perform a HW reset
2762 * Initialize adapter SW state for the various HW modules, set initial
2763 * values for some adapter tunables, take PHYs out of reset, and
2764 * initialize the MDIO interface.
2766 int __devinit t4_prep_adapter(struct adapter *adapter)
2770 ret = t4_wait_dev_ready(adapter);
2774 get_pci_mode(adapter, &adapter->params.pci);
2775 adapter->params.rev = t4_read_reg(adapter, PL_REV);
2777 ret = get_flash_params(adapter);
2779 dev_err(adapter->pdev_dev, "error %d identifying flash\n", ret);
2783 ret = get_vpd_params(adapter, &adapter->params.vpd);
2787 init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd);
2790 * Default port for debugging in case we can't reach FW.
2792 adapter->params.nports = 1;
2793 adapter->params.portvec = 1;
2797 int __devinit t4_port_init(struct adapter *adap, int mbox, int pf, int vf)
2801 struct fw_port_cmd c;
2802 struct fw_rss_vi_config_cmd rvc;
2804 memset(&c, 0, sizeof(c));
2805 memset(&rvc, 0, sizeof(rvc));
2807 for_each_port(adap, i) {
2808 unsigned int rss_size;
2809 struct port_info *p = adap2pinfo(adap, i);
2811 while ((adap->params.portvec & (1 << j)) == 0)
2814 c.op_to_portid = htonl(FW_CMD_OP(FW_PORT_CMD) |
2815 FW_CMD_REQUEST | FW_CMD_READ |
2816 FW_PORT_CMD_PORTID(j));
2817 c.action_to_len16 = htonl(
2818 FW_PORT_CMD_ACTION(FW_PORT_ACTION_GET_PORT_INFO) |
2820 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
2824 ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size);
2831 p->rss_size = rss_size;
2832 memcpy(adap->port[i]->dev_addr, addr, ETH_ALEN);
2833 memcpy(adap->port[i]->perm_addr, addr, ETH_ALEN);
2834 adap->port[i]->dev_id = j;
2836 ret = ntohl(c.u.info.lstatus_to_modtype);
2837 p->mdio_addr = (ret & FW_PORT_CMD_MDIOCAP) ?
2838 FW_PORT_CMD_MDIOADDR_GET(ret) : -1;
2839 p->port_type = FW_PORT_CMD_PTYPE_GET(ret);
2840 p->mod_type = FW_PORT_MOD_TYPE_NA;
2842 rvc.op_to_viid = htonl(FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
2843 FW_CMD_REQUEST | FW_CMD_READ |
2844 FW_RSS_VI_CONFIG_CMD_VIID(p->viid));
2845 rvc.retval_len16 = htonl(FW_LEN16(rvc));
2846 ret = t4_wr_mbox(adap, mbox, &rvc, sizeof(rvc), &rvc);
2849 p->rss_mode = ntohl(rvc.u.basicvirtual.defaultq_to_udpen);
2851 init_link_config(&p->link_cfg, ntohs(c.u.info.pcap));