drivers/net/dsa/b53/b53_common.c

   1 /*
   2  * B53 switch driver main logic
   3  *
   4  * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
   5  * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
   6  *
   7  * Permission to use, copy, modify, and/or distribute this software for any
   8  * purpose with or without fee is hereby granted, provided that the above
   9  * copyright notice and this permission notice appear in all copies.
  10  *
  11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  18  */
  19
  20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  21
  22 #include <linux/delay.h>
  23 #include <linux/export.h>
  24 #include <linux/gpio.h>
  25 #include <linux/kernel.h>
  26 #include <linux/module.h>
  27 #include <linux/platform_data/b53.h>
  28 #include <linux/phy.h>
  29 #include <linux/etherdevice.h>
  30 #include <linux/if_bridge.h>
  31 #include <net/dsa.h>
  32
  33 #include "b53_regs.h"
  34 #include "b53_priv.h"
  35
  36 struct b53_mib_desc {
  37         u8 size;
  38         u8 offset;
  39         const char *name;
  40 };
  41
  42 /* BCM5365 MIB counters */
  43 static const struct b53_mib_desc b53_mibs_65[] = {
  44         { 8, 0x00, "TxOctets" },
  45         { 4, 0x08, "TxDropPkts" },
  46         { 4, 0x10, "TxBroadcastPkts" },
  47         { 4, 0x14, "TxMulticastPkts" },
  48         { 4, 0x18, "TxUnicastPkts" },
  49         { 4, 0x1c, "TxCollisions" },
  50         { 4, 0x20, "TxSingleCollision" },
  51         { 4, 0x24, "TxMultipleCollision" },
  52         { 4, 0x28, "TxDeferredTransmit" },
  53         { 4, 0x2c, "TxLateCollision" },
  54         { 4, 0x30, "TxExcessiveCollision" },
  55         { 4, 0x38, "TxPausePkts" },
  56         { 8, 0x44, "RxOctets" },
  57         { 4, 0x4c, "RxUndersizePkts" },
  58         { 4, 0x50, "RxPausePkts" },
  59         { 4, 0x54, "Pkts64Octets" },
  60         { 4, 0x58, "Pkts65to127Octets" },
  61         { 4, 0x5c, "Pkts128to255Octets" },
  62         { 4, 0x60, "Pkts256to511Octets" },
  63         { 4, 0x64, "Pkts512to1023Octets" },
  64         { 4, 0x68, "Pkts1024to1522Octets" },
  65         { 4, 0x6c, "RxOversizePkts" },
  66         { 4, 0x70, "RxJabbers" },
  67         { 4, 0x74, "RxAlignmentErrors" },
  68         { 4, 0x78, "RxFCSErrors" },
  69         { 8, 0x7c, "RxGoodOctets" },
  70         { 4, 0x84, "RxDropPkts" },
  71         { 4, 0x88, "RxUnicastPkts" },
  72         { 4, 0x8c, "RxMulticastPkts" },
  73         { 4, 0x90, "RxBroadcastPkts" },
  74         { 4, 0x94, "RxSAChanges" },
  75         { 4, 0x98, "RxFragments" },
  76 };
  77
  78 #define B53_MIBS_65_SIZE        ARRAY_SIZE(b53_mibs_65)
  79
  80 /* BCM63xx MIB counters */
  81 static const struct b53_mib_desc b53_mibs_63xx[] = {
  82         { 8, 0x00, "TxOctets" },
  83         { 4, 0x08, "TxDropPkts" },
  84         { 4, 0x0c, "TxQoSPkts" },
  85         { 4, 0x10, "TxBroadcastPkts" },
  86         { 4, 0x14, "TxMulticastPkts" },
  87         { 4, 0x18, "TxUnicastPkts" },
  88         { 4, 0x1c, "TxCollisions" },
  89         { 4, 0x20, "TxSingleCollision" },
  90         { 4, 0x24, "TxMultipleCollision" },
  91         { 4, 0x28, "TxDeferredTransmit" },
  92         { 4, 0x2c, "TxLateCollision" },
  93         { 4, 0x30, "TxExcessiveCollision" },
  94         { 4, 0x38, "TxPausePkts" },
  95         { 8, 0x3c, "TxQoSOctets" },
  96         { 8, 0x44, "RxOctets" },
  97         { 4, 0x4c, "RxUndersizePkts" },
  98         { 4, 0x50, "RxPausePkts" },
  99         { 4, 0x54, "Pkts64Octets" },
 100         { 4, 0x58, "Pkts65to127Octets" },
 101         { 4, 0x5c, "Pkts128to255Octets" },
 102         { 4, 0x60, "Pkts256to511Octets" },
 103         { 4, 0x64, "Pkts512to1023Octets" },
 104         { 4, 0x68, "Pkts1024to1522Octets" },
 105         { 4, 0x6c, "RxOversizePkts" },
 106         { 4, 0x70, "RxJabbers" },
 107         { 4, 0x74, "RxAlignmentErrors" },
 108         { 4, 0x78, "RxFCSErrors" },
 109         { 8, 0x7c, "RxGoodOctets" },
 110         { 4, 0x84, "RxDropPkts" },
 111         { 4, 0x88, "RxUnicastPkts" },
 112         { 4, 0x8c, "RxMulticastPkts" },
 113         { 4, 0x90, "RxBroadcastPkts" },
 114         { 4, 0x94, "RxSAChanges" },
 115         { 4, 0x98, "RxFragments" },
 116         { 4, 0xa0, "RxSymbolErrors" },
 117         { 4, 0xa4, "RxQoSPkts" },
 118         { 8, 0xa8, "RxQoSOctets" },
 119         { 4, 0xb0, "Pkts1523to2047Octets" },
 120         { 4, 0xb4, "Pkts2048to4095Octets" },
 121         { 4, 0xb8, "Pkts4096to8191Octets" },
 122         { 4, 0xbc, "Pkts8192to9728Octets" },
 123         { 4, 0xc0, "RxDiscarded" },
 124 };
 125
 126 #define B53_MIBS_63XX_SIZE      ARRAY_SIZE(b53_mibs_63xx)
 127
 128 /* MIB counters */
 129 static const struct b53_mib_desc b53_mibs[] = {
 130         { 8, 0x00, "TxOctets" },
 131         { 4, 0x08, "TxDropPkts" },
 132         { 4, 0x10, "TxBroadcastPkts" },
 133         { 4, 0x14, "TxMulticastPkts" },
 134         { 4, 0x18, "TxUnicastPkts" },
 135         { 4, 0x1c, "TxCollisions" },
 136         { 4, 0x20, "TxSingleCollision" },
 137         { 4, 0x24, "TxMultipleCollision" },
 138         { 4, 0x28, "TxDeferredTransmit" },
 139         { 4, 0x2c, "TxLateCollision" },
 140         { 4, 0x30, "TxExcessiveCollision" },
 141         { 4, 0x38, "TxPausePkts" },
 142         { 8, 0x50, "RxOctets" },
 143         { 4, 0x58, "RxUndersizePkts" },
 144         { 4, 0x5c, "RxPausePkts" },
 145         { 4, 0x60, "Pkts64Octets" },
 146         { 4, 0x64, "Pkts65to127Octets" },
 147         { 4, 0x68, "Pkts128to255Octets" },
 148         { 4, 0x6c, "Pkts256to511Octets" },
 149         { 4, 0x70, "Pkts512to1023Octets" },
 150         { 4, 0x74, "Pkts1024to1522Octets" },
 151         { 4, 0x78, "RxOversizePkts" },
 152         { 4, 0x7c, "RxJabbers" },
 153         { 4, 0x80, "RxAlignmentErrors" },
 154         { 4, 0x84, "RxFCSErrors" },
 155         { 8, 0x88, "RxGoodOctets" },
 156         { 4, 0x90, "RxDropPkts" },
 157         { 4, 0x94, "RxUnicastPkts" },
 158         { 4, 0x98, "RxMulticastPkts" },
 159         { 4, 0x9c, "RxBroadcastPkts" },
 160         { 4, 0xa0, "RxSAChanges" },
 161         { 4, 0xa4, "RxFragments" },
 162         { 4, 0xa8, "RxJumboPkts" },
 163         { 4, 0xac, "RxSymbolErrors" },
 164         { 4, 0xc0, "RxDiscarded" },
 165 };
 166
 167 #define B53_MIBS_SIZE   ARRAY_SIZE(b53_mibs)
 168
 169 static const struct b53_mib_desc b53_mibs_58xx[] = {
 170         { 8, 0x00, "TxOctets" },
 171         { 4, 0x08, "TxDropPkts" },
 172         { 4, 0x0c, "TxQPKTQ0" },
 173         { 4, 0x10, "TxBroadcastPkts" },
 174         { 4, 0x14, "TxMulticastPkts" },
 175         { 4, 0x18, "TxUnicastPKts" },
 176         { 4, 0x1c, "TxCollisions" },
 177         { 4, 0x20, "TxSingleCollision" },
 178         { 4, 0x24, "TxMultipleCollision" },
 179         { 4, 0x28, "TxDeferredCollision" },
 180         { 4, 0x2c, "TxLateCollision" },
 181         { 4, 0x30, "TxExcessiveCollision" },
 182         { 4, 0x34, "TxFrameInDisc" },
 183         { 4, 0x38, "TxPausePkts" },
 184         { 4, 0x3c, "TxQPKTQ1" },
 185         { 4, 0x40, "TxQPKTQ2" },
 186         { 4, 0x44, "TxQPKTQ3" },
 187         { 4, 0x48, "TxQPKTQ4" },
 188         { 4, 0x4c, "TxQPKTQ5" },
 189         { 8, 0x50, "RxOctets" },
 190         { 4, 0x58, "RxUndersizePkts" },
 191         { 4, 0x5c, "RxPausePkts" },
 192         { 4, 0x60, "RxPkts64Octets" },
 193         { 4, 0x64, "RxPkts65to127Octets" },
 194         { 4, 0x68, "RxPkts128to255Octets" },
 195         { 4, 0x6c, "RxPkts256to511Octets" },
 196         { 4, 0x70, "RxPkts512to1023Octets" },
 197         { 4, 0x74, "RxPkts1024toMaxPktsOctets" },
 198         { 4, 0x78, "RxOversizePkts" },
 199         { 4, 0x7c, "RxJabbers" },
 200         { 4, 0x80, "RxAlignmentErrors" },
 201         { 4, 0x84, "RxFCSErrors" },
 202         { 8, 0x88, "RxGoodOctets" },
 203         { 4, 0x90, "RxDropPkts" },
 204         { 4, 0x94, "RxUnicastPkts" },
 205         { 4, 0x98, "RxMulticastPkts" },
 206         { 4, 0x9c, "RxBroadcastPkts" },
 207         { 4, 0xa0, "RxSAChanges" },
 208         { 4, 0xa4, "RxFragments" },
 209         { 4, 0xa8, "RxJumboPkt" },
 210         { 4, 0xac, "RxSymblErr" },
 211         { 4, 0xb0, "InRangeErrCount" },
 212         { 4, 0xb4, "OutRangeErrCount" },
 213         { 4, 0xb8, "EEELpiEvent" },
 214         { 4, 0xbc, "EEELpiDuration" },
 215         { 4, 0xc0, "RxDiscard" },
 216         { 4, 0xc8, "TxQPKTQ6" },
 217         { 4, 0xcc, "TxQPKTQ7" },
 218         { 4, 0xd0, "TxPkts64Octets" },
 219         { 4, 0xd4, "TxPkts65to127Octets" },
 220         { 4, 0xd8, "TxPkts128to255Octets" },
 221         { 4, 0xdc, "TxPkts256to511Ocets" },
 222         { 4, 0xe0, "TxPkts512to1023Ocets" },
 223         { 4, 0xe4, "TxPkts1024toMaxPktOcets" },
 224 };
 225
 226 #define B53_MIBS_58XX_SIZE      ARRAY_SIZE(b53_mibs_58xx)
 227
 228 static int b53_do_vlan_op(struct b53_device *dev, u8 op)
 229 {
 230         unsigned int i;
 231
 232         b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
 233
 234         for (i = 0; i < 10; i++) {
 235                 u8 vta;
 236
 237                 b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
 238                 if (!(vta & VTA_START_CMD))
 239                         return 0;
 240
 241                 usleep_range(100, 200);
 242         }
 243
 244         return -EIO;
 245 }
 246
 247 static void b53_set_vlan_entry(struct b53_device *dev, u16 vid,
 248                                struct b53_vlan *vlan)
 249 {
 250         if (is5325(dev)) {
 251                 u32 entry = 0;
 252
 253                 if (vlan->members) {
 254                         entry = ((vlan->untag & VA_UNTAG_MASK_25) <<
 255                                  VA_UNTAG_S_25) | vlan->members;
 256                         if (dev->core_rev >= 3)
 257                                 entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
 258                         else
 259                                 entry |= VA_VALID_25;
 260                 }
 261
 262                 b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
 263                 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
 264                             VTA_RW_STATE_WR | VTA_RW_OP_EN);
 265         } else if (is5365(dev)) {
 266                 u16 entry = 0;
 267
 268                 if (vlan->members)
 269                         entry = ((vlan->untag & VA_UNTAG_MASK_65) <<
 270                                  VA_UNTAG_S_65) | vlan->members | VA_VALID_65;
 271
 272                 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
 273                 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
 274                             VTA_RW_STATE_WR | VTA_RW_OP_EN);
 275         } else {
 276                 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
 277                 b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
 278                             (vlan->untag << VTE_UNTAG_S) | vlan->members);
 279
 280                 b53_do_vlan_op(dev, VTA_CMD_WRITE);
 281         }
 282
 283         dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n",
 284                 vid, vlan->members, vlan->untag);
 285 }
 286
 287 static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
 288                                struct b53_vlan *vlan)
 289 {
 290         if (is5325(dev)) {
 291                 u32 entry = 0;
 292
 293                 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
 294                             VTA_RW_STATE_RD | VTA_RW_OP_EN);
 295                 b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry);
 296
 297                 if (dev->core_rev >= 3)
 298                         vlan->valid = !!(entry & VA_VALID_25_R4);
 299                 else
 300                         vlan->valid = !!(entry & VA_VALID_25);
 301                 vlan->members = entry & VA_MEMBER_MASK;
 302                 vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25;
 303
 304         } else if (is5365(dev)) {
 305                 u16 entry = 0;
 306
 307                 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
 308                             VTA_RW_STATE_WR | VTA_RW_OP_EN);
 309                 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry);
 310
 311                 vlan->valid = !!(entry & VA_VALID_65);
 312                 vlan->members = entry & VA_MEMBER_MASK;
 313                 vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65;
 314         } else {
 315                 u32 entry = 0;
 316
 317                 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
 318                 b53_do_vlan_op(dev, VTA_CMD_READ);
 319                 b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry);
 320                 vlan->members = entry & VTE_MEMBERS;
 321                 vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS;
 322                 vlan->valid = true;
 323         }
 324 }
 325
 326 static void b53_set_forwarding(struct b53_device *dev, int enable)
 327 {
 328         u8 mgmt;
 329
 330         b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
 331
 332         if (enable)
 333                 mgmt |= SM_SW_FWD_EN;
 334         else
 335                 mgmt &= ~SM_SW_FWD_EN;
 336
 337         b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
 338
 339         /* Include IMP port in dumb forwarding mode
 340          */
 341         b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
 342         mgmt |= B53_MII_DUMB_FWDG_EN;
 343         b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
 344 }
 345
 346 static void b53_enable_vlan(struct b53_device *dev, bool enable)
 347 {
 348         u8 mgmt, vc0, vc1, vc4 = 0, vc5;
 349
 350         b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
 351         b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
 352         b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
 353
 354         if (is5325(dev) || is5365(dev)) {
 355                 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
 356                 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
 357         } else if (is63xx(dev)) {
 358                 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
 359                 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
 360         } else {
 361                 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
 362                 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
 363         }
 364
 365         mgmt &= ~SM_SW_FWD_MODE;
 366
 367         if (enable) {
 368                 vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
 369                 vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
 370                 vc4 &= ~VC4_ING_VID_CHECK_MASK;
 371                 vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
 372                 vc5 |= VC5_DROP_VTABLE_MISS;
 373
 374                 if (is5325(dev))
 375                         vc0 &= ~VC0_RESERVED_1;
 376
 377                 if (is5325(dev) || is5365(dev))
 378                         vc1 |= VC1_RX_MCST_TAG_EN;
 379
 380         } else {
 381                 vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
 382                 vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
 383                 vc4 &= ~VC4_ING_VID_CHECK_MASK;
 384                 vc5 &= ~VC5_DROP_VTABLE_MISS;
 385
 386                 if (is5325(dev) || is5365(dev))
 387                         vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
 388                 else
 389                         vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
 390
 391                 if (is5325(dev) || is5365(dev))
 392                         vc1 &= ~VC1_RX_MCST_TAG_EN;
 393         }
 394
 395         if (!is5325(dev) && !is5365(dev))
 396                 vc5 &= ~VC5_VID_FFF_EN;
 397
 398         b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
 399         b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
 400
 401         if (is5325(dev) || is5365(dev)) {
 402                 /* enable the high 8 bit vid check on 5325 */
 403                 if (is5325(dev) && enable)
 404                         b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
 405                                    VC3_HIGH_8BIT_EN);
 406                 else
 407                         b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
 408
 409                 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
 410                 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
 411         } else if (is63xx(dev)) {
 412                 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
 413                 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
 414                 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
 415         } else {
 416                 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
 417                 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
 418                 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
 419         }
 420
 421         b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
 422 }
 423
 424 static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
 425 {
 426         u32 port_mask = 0;
 427         u16 max_size = JMS_MIN_SIZE;
 428
 429         if (is5325(dev) || is5365(dev))
 430                 return -EINVAL;
 431
 432         if (enable) {
 433                 port_mask = dev->enabled_ports;
 434                 max_size = JMS_MAX_SIZE;
 435                 if (allow_10_100)
 436                         port_mask |= JPM_10_100_JUMBO_EN;
 437         }
 438
 439         b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
 440         return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
 441 }
 442
 443 static int b53_flush_arl(struct b53_device *dev, u8 mask)
 444 {
 445         unsigned int i;
 446
 447         b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
 448                    FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
 449
 450         for (i = 0; i < 10; i++) {
 451                 u8 fast_age_ctrl;
 452
 453                 b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
 454                           &fast_age_ctrl);
 455
 456                 if (!(fast_age_ctrl & FAST_AGE_DONE))
 457                         goto out;
 458
 459                 msleep(1);
 460         }
 461
 462         return -ETIMEDOUT;
 463 out:
 464         /* Only age dynamic entries (default behavior) */
 465         b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
 466         return 0;
 467 }
 468
 469 static int b53_fast_age_port(struct b53_device *dev, int port)
 470 {
 471         b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
 472
 473         return b53_flush_arl(dev, FAST_AGE_PORT);
 474 }
 475
 476 static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
 477 {
 478         b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
 479
 480         return b53_flush_arl(dev, FAST_AGE_VLAN);
 481 }
 482
 483 void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 484 {
 485         struct b53_device *dev = ds->priv;
 486         unsigned int i;
 487         u16 pvlan;
 488
 489         /* Enable the IMP port to be in the same VLAN as the other ports
 490          * on a per-port basis such that we only have Port i and IMP in
 491          * the same VLAN.
 492          */
 493         b53_for_each_port(dev, i) {
 494                 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan);
 495                 pvlan |= BIT(cpu_port);
 496                 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
 497         }
 498 }
 499 EXPORT_SYMBOL(b53_imp_vlan_setup);
 500
 501 int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 502 {
 503         struct b53_device *dev = ds->priv;
 504         unsigned int cpu_port = ds->ports[port].cpu_dp->index;
 505         u16 pvlan;
 506
 507         /* Clear the Rx and Tx disable bits and set to no spanning tree */
 508         b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
 509
 510         /* Set this port, and only this one to be in the default VLAN,
 511          * if member of a bridge, restore its membership prior to
 512          * bringing down this port.
 513          */
 514         b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
 515         pvlan &= ~0x1ff;
 516         pvlan |= BIT(port);
 517         pvlan |= dev->ports[port].vlan_ctl_mask;
 518         b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
 519
 520         b53_imp_vlan_setup(ds, cpu_port);
 521
 522         /* If EEE was enabled, restore it */
 523         if (dev->ports[port].eee.eee_enabled)
 524                 b53_eee_enable_set(ds, port, true);
 525
 526         return 0;
 527 }
 528 EXPORT_SYMBOL(b53_enable_port);
 529
 530 void b53_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 531 {
 532         struct b53_device *dev = ds->priv;
 533         u8 reg;
 534
 535         /* Disable Tx/Rx for the port */
 536         b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
 537         reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
 538         b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
 539 }
 540 EXPORT_SYMBOL(b53_disable_port);
 541
 542 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
 543 {
 544         bool tag_en = !(ds->ops->get_tag_protocol(ds, port) ==
 545                          DSA_TAG_PROTO_NONE);
 546         struct b53_device *dev = ds->priv;
 547         u8 hdr_ctl, val;
 548         u16 reg;
 549
 550         /* Resolve which bit controls the Broadcom tag */
 551         switch (port) {
 552         case 8:
 553                 val = BRCM_HDR_P8_EN;
 554                 break;
 555         case 7:
 556                 val = BRCM_HDR_P7_EN;
 557                 break;
 558         case 5:
 559                 val = BRCM_HDR_P5_EN;
 560                 break;
 561         default:
 562                 val = 0;
 563                 break;
 564         }
 565
 566         /* Enable Broadcom tags for IMP port */
 567         b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
 568         if (tag_en)
 569                 hdr_ctl |= val;
 570         else
 571                 hdr_ctl &= ~val;
 572         b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
 573
 574         /* Registers below are only accessible on newer devices */
 575         if (!is58xx(dev))
 576                 return;
 577
 578         /* Enable reception Broadcom tag for CPU TX (switch RX) to
 579          * allow us to tag outgoing frames
 580          */
 581         b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, &reg);
 582         if (tag_en)
 583                 reg &= ~BIT(port);
 584         else
 585                 reg |= BIT(port);
 586         b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
 587
 588         /* Enable transmission of Broadcom tags from the switch (CPU RX) to
 589          * allow delivering frames to the per-port net_devices
 590          */
 591         b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, &reg);
 592         if (tag_en)
 593                 reg &= ~BIT(port);
 594         else
 595                 reg |= BIT(port);
 596         b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
 597 }
 598 EXPORT_SYMBOL(b53_brcm_hdr_setup);
 599
 600 static void b53_enable_cpu_port(struct b53_device *dev, int port)
 601 {
 602         u8 port_ctrl;
 603
 604         /* BCM5325 CPU port is at 8 */
 605         if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
 606                 port = B53_CPU_PORT;
 607
 608         port_ctrl = PORT_CTRL_RX_BCST_EN |
 609                     PORT_CTRL_RX_MCST_EN |
 610                     PORT_CTRL_RX_UCST_EN;
 611         b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
 612
 613         b53_brcm_hdr_setup(dev->ds, port);
 614 }
 615
 616 static void b53_enable_mib(struct b53_device *dev)
 617 {
 618         u8 gc;
 619
 620         b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
 621         gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
 622         b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
 623 }
 624
 625 int b53_configure_vlan(struct dsa_switch *ds)
 626 {
 627         struct b53_device *dev = ds->priv;
 628         struct b53_vlan vl = { 0 };
 629         int i;
 630
 631         /* clear all vlan entries */
 632         if (is5325(dev) || is5365(dev)) {
 633                 for (i = 1; i < dev->num_vlans; i++)
 634                         b53_set_vlan_entry(dev, i, &vl);
 635         } else {
 636                 b53_do_vlan_op(dev, VTA_CMD_CLEAR);
 637         }
 638
 639         b53_enable_vlan(dev, false);
 640
 641         b53_for_each_port(dev, i)
 642                 b53_write16(dev, B53_VLAN_PAGE,
 643                             B53_VLAN_PORT_DEF_TAG(i), 1);
 644
 645         if (!is5325(dev) && !is5365(dev))
 646                 b53_set_jumbo(dev, dev->enable_jumbo, false);
 647
 648         return 0;
 649 }
 650 EXPORT_SYMBOL(b53_configure_vlan);
 651
 652 static void b53_switch_reset_gpio(struct b53_device *dev)
 653 {
 654         int gpio = dev->reset_gpio;
 655
 656         if (gpio < 0)
 657                 return;
 658
 659         /* Reset sequence: RESET low(50ms)->high(20ms)
 660          */
 661         gpio_set_value(gpio, 0);
 662         mdelay(50);
 663
 664         gpio_set_value(gpio, 1);
 665         mdelay(20);
 666
 667         dev->current_page = 0xff;
 668 }
 669
 670 static int b53_switch_reset(struct b53_device *dev)
 671 {
 672         unsigned int timeout = 1000;
 673         u8 mgmt, reg;
 674
 675         b53_switch_reset_gpio(dev);
 676
 677         if (is539x(dev)) {
 678                 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
 679                 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
 680         }
 681
 682         /* This is specific to 58xx devices here, do not use is58xx() which
 683          * covers the larger Starfigther 2 family, including 7445/7278 which
 684          * still use this driver as a library and need to perform the reset
 685          * earlier.
 686          */
 687         if (dev->chip_id == BCM58XX_DEVICE_ID) {
 688                 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
 689                 reg |= SW_RST | EN_SW_RST | EN_CH_RST;
 690                 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
 691
 692                 do {
 693                         b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
 694                         if (!(reg & SW_RST))
 695                                 break;
 696
 697                         usleep_range(1000, 2000);
 698                 } while (timeout-- > 0);
 699
 700                 if (timeout == 0)
 701                         return -ETIMEDOUT;
 702         }
 703
 704         b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
 705
 706         if (!(mgmt & SM_SW_FWD_EN)) {
 707                 mgmt &= ~SM_SW_FWD_MODE;
 708                 mgmt |= SM_SW_FWD_EN;
 709
 710                 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
 711                 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
 712
 713                 if (!(mgmt & SM_SW_FWD_EN)) {
 714                         dev_err(dev->dev, "Failed to enable switch!\n");
 715                         return -EINVAL;
 716                 }
 717         }
 718
 719         b53_enable_mib(dev);
 720
 721         return b53_flush_arl(dev, FAST_AGE_STATIC);
 722 }
 723
 724 static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
 725 {
 726         struct b53_device *priv = ds->priv;
 727         u16 value = 0;
 728         int ret;
 729
 730         if (priv->ops->phy_read16)
 731                 ret = priv->ops->phy_read16(priv, addr, reg, &value);
 732         else
 733                 ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
 734                                  reg * 2, &value);
 735
 736         return ret ? ret : value;
 737 }
 738
 739 static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
 740 {
 741         struct b53_device *priv = ds->priv;
 742
 743         if (priv->ops->phy_write16)
 744                 return priv->ops->phy_write16(priv, addr, reg, val);
 745
 746         return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
 747 }
 748
 749 static int b53_reset_switch(struct b53_device *priv)
 750 {
 751         /* reset vlans */
 752         priv->enable_jumbo = false;
 753
 754         memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
 755         memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
 756
 757         return b53_switch_reset(priv);
 758 }
 759
 760 static int b53_apply_config(struct b53_device *priv)
 761 {
 762         /* disable switching */
 763         b53_set_forwarding(priv, 0);
 764
 765         b53_configure_vlan(priv->ds);
 766
 767         /* enable switching */
 768         b53_set_forwarding(priv, 1);
 769
 770         return 0;
 771 }
 772
 773 static void b53_reset_mib(struct b53_device *priv)
 774 {
 775         u8 gc;
 776
 777         b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
 778
 779         b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
 780         msleep(1);
 781         b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
 782         msleep(1);
 783 }
 784
 785 static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
 786 {
 787         if (is5365(dev))
 788                 return b53_mibs_65;
 789         else if (is63xx(dev))
 790                 return b53_mibs_63xx;
 791         else if (is58xx(dev))
 792                 return b53_mibs_58xx;
 793         else
 794                 return b53_mibs;
 795 }
 796
 797 static unsigned int b53_get_mib_size(struct b53_device *dev)
 798 {
 799         if (is5365(dev))
 800                 return B53_MIBS_65_SIZE;
 801         else if (is63xx(dev))
 802                 return B53_MIBS_63XX_SIZE;
 803         else if (is58xx(dev))
 804                 return B53_MIBS_58XX_SIZE;
 805         else
 806                 return B53_MIBS_SIZE;
 807 }
 808
 809 void b53_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
 810 {
 811         struct b53_device *dev = ds->priv;
 812         const struct b53_mib_desc *mibs = b53_get_mib(dev);
 813         unsigned int mib_size = b53_get_mib_size(dev);
 814         unsigned int i;
 815
 816         for (i = 0; i < mib_size; i++)
 817                 memcpy(data + i * ETH_GSTRING_LEN,
 818                        mibs[i].name, ETH_GSTRING_LEN);
 819 }
 820 EXPORT_SYMBOL(b53_get_strings);
 821
 822 void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
 823 {
 824         struct b53_device *dev = ds->priv;
 825         const struct b53_mib_desc *mibs = b53_get_mib(dev);
 826         unsigned int mib_size = b53_get_mib_size(dev);
 827         const struct b53_mib_desc *s;
 828         unsigned int i;
 829         u64 val = 0;
 830
 831         if (is5365(dev) && port == 5)
 832                 port = 8;
 833
 834         mutex_lock(&dev->stats_mutex);
 835
 836         for (i = 0; i < mib_size; i++) {
 837                 s = &mibs[i];
 838
 839                 if (s->size == 8) {
 840                         b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
 841                 } else {
 842                         u32 val32;
 843
 844                         b53_read32(dev, B53_MIB_PAGE(port), s->offset,
 845                                    &val32);
 846                         val = val32;
 847                 }
 848                 data[i] = (u64)val;
 849         }
 850
 851         mutex_unlock(&dev->stats_mutex);
 852 }
 853 EXPORT_SYMBOL(b53_get_ethtool_stats);
 854
 855 int b53_get_sset_count(struct dsa_switch *ds, int port)
 856 {
 857         struct b53_device *dev = ds->priv;
 858
 859         return b53_get_mib_size(dev);
 860 }
 861 EXPORT_SYMBOL(b53_get_sset_count);
 862
 863 static int b53_setup(struct dsa_switch *ds)
 864 {
 865         struct b53_device *dev = ds->priv;
 866         unsigned int port;
 867         int ret;
 868
 869         ret = b53_reset_switch(dev);
 870         if (ret) {
 871                 dev_err(ds->dev, "failed to reset switch\n");
 872                 return ret;
 873         }
 874
 875         b53_reset_mib(dev);
 876
 877         ret = b53_apply_config(dev);
 878         if (ret)
 879                 dev_err(ds->dev, "failed to apply configuration\n");
 880
 881         /* Configure IMP/CPU port, disable unused ports. Enabled
 882          * ports will be configured with .port_enable
 883          */
 884         for (port = 0; port < dev->num_ports; port++) {
 885                 if (dsa_is_cpu_port(ds, port))
 886                         b53_enable_cpu_port(dev, port);
 887                 else if (dsa_is_unused_port(ds, port))
 888                         b53_disable_port(ds, port, NULL);
 889         }
 890
 891         return ret;
 892 }
 893
 894 static void b53_adjust_link(struct dsa_switch *ds, int port,
 895                             struct phy_device *phydev)
 896 {
 897         struct b53_device *dev = ds->priv;
 898         struct ethtool_eee *p = &dev->ports[port].eee;
 899         u8 rgmii_ctrl = 0, reg = 0, off;
 900
 901         if (!phy_is_pseudo_fixed_link(phydev))
 902                 return;
 903
 904         /* Override the port settings */
 905         if (port == dev->cpu_port) {
 906                 off = B53_PORT_OVERRIDE_CTRL;
 907                 reg = PORT_OVERRIDE_EN;
 908         } else {
 909                 off = B53_GMII_PORT_OVERRIDE_CTRL(port);
 910                 reg = GMII_PO_EN;
 911         }
 912
 913         /* Set the link UP */
 914         if (phydev->link)
 915                 reg |= PORT_OVERRIDE_LINK;
 916
 917         if (phydev->duplex == DUPLEX_FULL)
 918                 reg |= PORT_OVERRIDE_FULL_DUPLEX;
 919
 920         switch (phydev->speed) {
 921         case 2000:
 922                 reg |= PORT_OVERRIDE_SPEED_2000M;
 923                 /* fallthrough */
 924         case SPEED_1000:
 925                 reg |= PORT_OVERRIDE_SPEED_1000M;
 926                 break;
 927         case SPEED_100:
 928                 reg |= PORT_OVERRIDE_SPEED_100M;
 929                 break;
 930         case SPEED_10:
 931                 reg |= PORT_OVERRIDE_SPEED_10M;
 932                 break;
 933         default:
 934                 dev_err(ds->dev, "unknown speed: %d\n", phydev->speed);
 935                 return;
 936         }
 937
 938         /* Enable flow control on BCM5301x's CPU port */
 939         if (is5301x(dev) && port == dev->cpu_port)
 940                 reg |= PORT_OVERRIDE_RX_FLOW | PORT_OVERRIDE_TX_FLOW;
 941
 942         if (phydev->pause) {
 943                 if (phydev->asym_pause)
 944                         reg |= PORT_OVERRIDE_TX_FLOW;
 945                 reg |= PORT_OVERRIDE_RX_FLOW;
 946         }
 947
 948         b53_write8(dev, B53_CTRL_PAGE, off, reg);
 949
 950         if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
 951                 if (port == 8)
 952                         off = B53_RGMII_CTRL_IMP;
 953                 else
 954                         off = B53_RGMII_CTRL_P(port);
 955
 956                 /* Configure the port RGMII clock delay by DLL disabled and
 957                  * tx_clk aligned timing (restoring to reset defaults)
 958                  */
 959                 b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
 960                 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
 961                                 RGMII_CTRL_TIMING_SEL);
 962
 963                 /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
 964                  * sure that we enable the port TX clock internal delay to
 965                  * account for this internal delay that is inserted, otherwise
 966                  * the switch won't be able to receive correctly.
 967                  *
 968                  * PHY_INTERFACE_MODE_RGMII means that we are not introducing
 969                  * any delay neither on transmission nor reception, so the
 970                  * BCM53125 must also be configured accordingly to account for
 971                  * the lack of delay and introduce
 972                  *
 973                  * The BCM53125 switch has its RX clock and TX clock control
 974                  * swapped, hence the reason why we modify the TX clock path in
 975                  * the "RGMII" case
 976                  */
 977                 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
 978                         rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
 979                 if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
 980                         rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
 981                 rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
 982                 b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
 983
 984                 dev_info(ds->dev, "Configured port %d for %s\n", port,
 985                          phy_modes(phydev->interface));
 986         }
 987
 988         /* configure MII port if necessary */
 989         if (is5325(dev)) {
 990                 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
 991                           &reg);
 992
 993                 /* reverse mii needs to be enabled */
 994                 if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
 995                         b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
 996                                    reg | PORT_OVERRIDE_RV_MII_25);
 997                         b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
 998                                   &reg);
 999
1000                         if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1001                                 dev_err(ds->dev,
1002                                         "Failed to enable reverse MII mode\n");
1003                                 return;
1004                         }
1005                 }
1006         } else if (is5301x(dev)) {
1007                 if (port != dev->cpu_port) {
1008                         u8 po_reg = B53_GMII_PORT_OVERRIDE_CTRL(dev->cpu_port);
1009                         u8 gmii_po;
1010
1011                         b53_read8(dev, B53_CTRL_PAGE, po_reg, &gmii_po);
1012                         gmii_po |= GMII_PO_LINK |
1013                                    GMII_PO_RX_FLOW |
1014                                    GMII_PO_TX_FLOW |
1015                                    GMII_PO_EN |
1016                                    GMII_PO_SPEED_2000M;
1017                         b53_write8(dev, B53_CTRL_PAGE, po_reg, gmii_po);
1018                 }
1019         }
1020
1021         /* Re-negotiate EEE if it was enabled already */
1022         p->eee_enabled = b53_eee_init(ds, port, phydev);
1023 }
1024
1025 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
1026 {
1027         return 0;
1028 }
1029 EXPORT_SYMBOL(b53_vlan_filtering);
1030
1031 int b53_vlan_prepare(struct dsa_switch *ds, int port,
1032                      const struct switchdev_obj_port_vlan *vlan)
1033 {
1034         struct b53_device *dev = ds->priv;
1035
1036         if ((is5325(dev) || is5365(dev)) && vlan->vid_begin == 0)
1037                 return -EOPNOTSUPP;
1038
1039         if (vlan->vid_end > dev->num_vlans)
1040                 return -ERANGE;
1041
1042         b53_enable_vlan(dev, true);
1043
1044         return 0;
1045 }
1046 EXPORT_SYMBOL(b53_vlan_prepare);
1047
1048 void b53_vlan_add(struct dsa_switch *ds, int port,
1049                   const struct switchdev_obj_port_vlan *vlan)
1050 {
1051         struct b53_device *dev = ds->priv;
1052         bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1053         bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
1054         struct b53_vlan *vl;
1055         u16 vid;
1056
1057         for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
1058                 vl = &dev->vlans[vid];
1059
1060                 b53_get_vlan_entry(dev, vid, vl);
1061
1062                 vl->members |= BIT(port);
1063                 if (untagged)
1064                         vl->untag |= BIT(port);
1065                 else
1066                         vl->untag &= ~BIT(port);
1067
1068                 b53_set_vlan_entry(dev, vid, vl);
1069                 b53_fast_age_vlan(dev, vid);
1070         }
1071
1072         if (pvid) {
1073                 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
1074                             vlan->vid_end);
1075                 b53_fast_age_vlan(dev, vid);
1076         }
1077 }
1078 EXPORT_SYMBOL(b53_vlan_add);
1079
1080 int b53_vlan_del(struct dsa_switch *ds, int port,
1081                  const struct switchdev_obj_port_vlan *vlan)
1082 {
1083         struct b53_device *dev = ds->priv;
1084         bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1085         struct b53_vlan *vl;
1086         u16 vid;
1087         u16 pvid;
1088
1089         b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
1090
1091         for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
1092                 vl = &dev->vlans[vid];
1093
1094                 b53_get_vlan_entry(dev, vid, vl);
1095
1096                 vl->members &= ~BIT(port);
1097
1098                 if (pvid == vid) {
1099                         if (is5325(dev) || is5365(dev))
1100                                 pvid = 1;
1101                         else
1102                                 pvid = 0;
1103                 }
1104
1105                 if (untagged)
1106                         vl->untag &= ~(BIT(port));
1107
1108                 b53_set_vlan_entry(dev, vid, vl);
1109                 b53_fast_age_vlan(dev, vid);
1110         }
1111
1112         b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
1113         b53_fast_age_vlan(dev, pvid);
1114
1115         return 0;
1116 }
1117 EXPORT_SYMBOL(b53_vlan_del);
1118
1119 /* Address Resolution Logic routines */
1120 static int b53_arl_op_wait(struct b53_device *dev)
1121 {
1122         unsigned int timeout = 10;
1123         u8 reg;
1124
1125         do {
1126                 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
1127                 if (!(reg & ARLTBL_START_DONE))
1128                         return 0;
1129
1130                 usleep_range(1000, 2000);
1131         } while (timeout--);
1132
1133         dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
1134
1135         return -ETIMEDOUT;
1136 }
1137
1138 static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
1139 {
1140         u8 reg;
1141
1142         if (op > ARLTBL_RW)
1143                 return -EINVAL;
1144
1145         b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
1146         reg |= ARLTBL_START_DONE;
1147         if (op)
1148                 reg |= ARLTBL_RW;
1149         else
1150                 reg &= ~ARLTBL_RW;
1151         b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
1152
1153         return b53_arl_op_wait(dev);
1154 }
1155
1156 static int b53_arl_read(struct b53_device *dev, u64 mac,
1157                         u16 vid, struct b53_arl_entry *ent, u8 *idx,
1158                         bool is_valid)
1159 {
1160         unsigned int i;
1161         int ret;
1162
1163         ret = b53_arl_op_wait(dev);
1164         if (ret)
1165                 return ret;
1166
1167         /* Read the bins */
1168         for (i = 0; i < dev->num_arl_entries; i++) {
1169                 u64 mac_vid;
1170                 u32 fwd_entry;
1171
1172                 b53_read64(dev, B53_ARLIO_PAGE,
1173                            B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
1174                 b53_read32(dev, B53_ARLIO_PAGE,
1175                            B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
1176                 b53_arl_to_entry(ent, mac_vid, fwd_entry);
1177
1178                 if (!(fwd_entry & ARLTBL_VALID))
1179                         continue;
1180                 if ((mac_vid & ARLTBL_MAC_MASK) != mac)
1181                         continue;
1182                 *idx = i;
1183         }
1184
1185         return -ENOENT;
1186 }
1187
1188 static int b53_arl_op(struct b53_device *dev, int op, int port,
1189                       const unsigned char *addr, u16 vid, bool is_valid)
1190 {
1191         struct b53_arl_entry ent;
1192         u32 fwd_entry;
1193         u64 mac, mac_vid = 0;
1194         u8 idx = 0;
1195         int ret;
1196
1197         /* Convert the array into a 64-bit MAC */
1198         mac = ether_addr_to_u64(addr);
1199
1200         /* Perform a read for the given MAC and VID */
1201         b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
1202         b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
1203
1204         /* Issue a read operation for this MAC */
1205         ret = b53_arl_rw_op(dev, 1);
1206         if (ret)
1207                 return ret;
1208
1209         ret = b53_arl_read(dev, mac, vid, &ent, &idx, is_valid);
1210         /* If this is a read, just finish now */
1211         if (op)
1212                 return ret;
1213
1214         /* We could not find a matching MAC, so reset to a new entry */
1215         if (ret) {
1216                 fwd_entry = 0;
1217                 idx = 1;
1218         }
1219
1220         memset(&ent, 0, sizeof(ent));
1221         ent.port = port;
1222         ent.is_valid = is_valid;
1223         ent.vid = vid;
1224         ent.is_static = true;
1225         memcpy(ent.mac, addr, ETH_ALEN);
1226         b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
1227
1228         b53_write64(dev, B53_ARLIO_PAGE,
1229                     B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
1230         b53_write32(dev, B53_ARLIO_PAGE,
1231                     B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
1232
1233         return b53_arl_rw_op(dev, 0);
1234 }
1235
1236 int b53_fdb_add(struct dsa_switch *ds, int port,
1237                 const unsigned char *addr, u16 vid)
1238 {
1239         struct b53_device *priv = ds->priv;
1240
1241         /* 5325 and 5365 require some more massaging, but could
1242          * be supported eventually
1243          */
1244         if (is5325(priv) || is5365(priv))
1245                 return -EOPNOTSUPP;
1246
1247         return b53_arl_op(priv, 0, port, addr, vid, true);
1248 }
1249 EXPORT_SYMBOL(b53_fdb_add);
1250
1251 int b53_fdb_del(struct dsa_switch *ds, int port,
1252                 const unsigned char *addr, u16 vid)
1253 {
1254         struct b53_device *priv = ds->priv;
1255
1256         return b53_arl_op(priv, 0, port, addr, vid, false);
1257 }
1258 EXPORT_SYMBOL(b53_fdb_del);
1259
1260 static int b53_arl_search_wait(struct b53_device *dev)
1261 {
1262         unsigned int timeout = 1000;
1263         u8 reg;
1264
1265         do {
1266                 b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, &reg);
1267                 if (!(reg & ARL_SRCH_STDN))
1268                         return 0;
1269
1270                 if (reg & ARL_SRCH_VLID)
1271                         return 0;
1272
1273                 usleep_range(1000, 2000);
1274         } while (timeout--);
1275
1276         return -ETIMEDOUT;
1277 }
1278
1279 static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
1280                               struct b53_arl_entry *ent)
1281 {
1282         u64 mac_vid;
1283         u32 fwd_entry;
1284
1285         b53_read64(dev, B53_ARLIO_PAGE,
1286                    B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
1287         b53_read32(dev, B53_ARLIO_PAGE,
1288                    B53_ARL_SRCH_RSTL(idx), &fwd_entry);
1289         b53_arl_to_entry(ent, mac_vid, fwd_entry);
1290 }
1291
1292 static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
1293                         dsa_fdb_dump_cb_t *cb, void *data)
1294 {
1295         if (!ent->is_valid)
1296                 return 0;
1297
1298         if (port != ent->port)
1299                 return 0;
1300
1301         return cb(ent->mac, ent->vid, ent->is_static, data);
1302 }
1303
1304 int b53_fdb_dump(struct dsa_switch *ds, int port,
1305                  dsa_fdb_dump_cb_t *cb, void *data)
1306 {
1307         struct b53_device *priv = ds->priv;
1308         struct b53_arl_entry results[2];
1309         unsigned int count = 0;
1310         int ret;
1311         u8 reg;
1312
1313         /* Start search operation */
1314         reg = ARL_SRCH_STDN;
1315         b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
1316
1317         do {
1318                 ret = b53_arl_search_wait(priv);
1319                 if (ret)
1320                         return ret;
1321
1322                 b53_arl_search_rd(priv, 0, &results[0]);
1323                 ret = b53_fdb_copy(port, &results[0], cb, data);
1324                 if (ret)
1325                         return ret;
1326
1327                 if (priv->num_arl_entries > 2) {
1328                         b53_arl_search_rd(priv, 1, &results[1]);
1329                         ret = b53_fdb_copy(port, &results[1], cb, data);
1330                         if (ret)
1331                                 return ret;
1332
1333                         if (!results[0].is_valid && !results[1].is_valid)
1334                                 break;
1335                 }
1336
1337         } while (count++ < 1024);
1338
1339         return 0;
1340 }
1341 EXPORT_SYMBOL(b53_fdb_dump);
1342
1343 int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br)
1344 {
1345         struct b53_device *dev = ds->priv;
1346         s8 cpu_port = ds->ports[port].cpu_dp->index;
1347         u16 pvlan, reg;
1348         unsigned int i;
1349
1350         /* Make this port leave the all VLANs join since we will have proper
1351          * VLAN entries from now on
1352          */
1353         if (is58xx(dev)) {
1354                 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
1355                 reg &= ~BIT(port);
1356                 if ((reg & BIT(cpu_port)) == BIT(cpu_port))
1357                         reg &= ~BIT(cpu_port);
1358                 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1359         }
1360
1361         b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1362
1363         b53_for_each_port(dev, i) {
1364                 if (dsa_to_port(ds, i)->bridge_dev != br)
1365                         continue;
1366
1367                 /* Add this local port to the remote port VLAN control
1368                  * membership and update the remote port bitmask
1369                  */
1370                 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
1371                 reg |= BIT(port);
1372                 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1373                 dev->ports[i].vlan_ctl_mask = reg;
1374
1375                 pvlan |= BIT(i);
1376         }
1377
1378         /* Configure the local port VLAN control membership to include
1379          * remote ports and update the local port bitmask
1380          */
1381         b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1382         dev->ports[port].vlan_ctl_mask = pvlan;
1383
1384         return 0;
1385 }
1386 EXPORT_SYMBOL(b53_br_join);
1387
1388 void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br)
1389 {
1390         struct b53_device *dev = ds->priv;
1391         struct b53_vlan *vl = &dev->vlans[0];
1392         s8 cpu_port = ds->ports[port].cpu_dp->index;
1393         unsigned int i;
1394         u16 pvlan, reg, pvid;
1395
1396         b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1397
1398         b53_for_each_port(dev, i) {
1399                 /* Don't touch the remaining ports */
1400                 if (dsa_to_port(ds, i)->bridge_dev != br)
1401                         continue;
1402
1403                 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
1404                 reg &= ~BIT(port);
1405                 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1406                 dev->ports[port].vlan_ctl_mask = reg;
1407
1408                 /* Prevent self removal to preserve isolation */
1409                 if (port != i)
1410                         pvlan &= ~BIT(i);
1411         }
1412
1413         b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1414         dev->ports[port].vlan_ctl_mask = pvlan;
1415
1416         if (is5325(dev) || is5365(dev))
1417                 pvid = 1;
1418         else
1419                 pvid = 0;
1420
1421         /* Make this port join all VLANs without VLAN entries */
1422         if (is58xx(dev)) {
1423                 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
1424                 reg |= BIT(port);
1425                 if (!(reg & BIT(cpu_port)))
1426                         reg |= BIT(cpu_port);
1427                 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1428         } else {
1429                 b53_get_vlan_entry(dev, pvid, vl);
1430                 vl->members |= BIT(port) | BIT(cpu_port);
1431                 vl->untag |= BIT(port) | BIT(cpu_port);
1432                 b53_set_vlan_entry(dev, pvid, vl);
1433         }
1434 }
1435 EXPORT_SYMBOL(b53_br_leave);
1436
1437 void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
1438 {
1439         struct b53_device *dev = ds->priv;
1440         u8 hw_state;
1441         u8 reg;
1442
1443         switch (state) {
1444         case BR_STATE_DISABLED:
1445                 hw_state = PORT_CTRL_DIS_STATE;
1446                 break;
1447         case BR_STATE_LISTENING:
1448                 hw_state = PORT_CTRL_LISTEN_STATE;
1449                 break;
1450         case BR_STATE_LEARNING:
1451                 hw_state = PORT_CTRL_LEARN_STATE;
1452                 break;
1453         case BR_STATE_FORWARDING:
1454                 hw_state = PORT_CTRL_FWD_STATE;
1455                 break;
1456         case BR_STATE_BLOCKING:
1457                 hw_state = PORT_CTRL_BLOCK_STATE;
1458                 break;
1459         default:
1460                 dev_err(ds->dev, "invalid STP state: %d\n", state);
1461                 return;
1462         }
1463
1464         b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
1465         reg &= ~PORT_CTRL_STP_STATE_MASK;
1466         reg |= hw_state;
1467         b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
1468 }
1469 EXPORT_SYMBOL(b53_br_set_stp_state);
1470
1471 void b53_br_fast_age(struct dsa_switch *ds, int port)
1472 {
1473         struct b53_device *dev = ds->priv;
1474
1475         if (b53_fast_age_port(dev, port))
1476                 dev_err(ds->dev, "fast ageing failed\n");
1477 }
1478 EXPORT_SYMBOL(b53_br_fast_age);
1479
1480 static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port)
1481 {
1482         /* Broadcom switches will accept enabling Broadcom tags on the
1483          * following ports: 5, 7 and 8, any other port is not supported
1484          */
1485         switch (port) {
1486         case B53_CPU_PORT_25:
1487         case 7:
1488         case B53_CPU_PORT:
1489                 return true;
1490         }
1491
1492         dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n", port);
1493         return false;
1494 }
1495
1496 enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port)
1497 {
1498         struct b53_device *dev = ds->priv;
1499
1500         /* Older models (5325, 5365) support a different tag format that we do
1501          * not support in net/dsa/tag_brcm.c yet. 539x and 531x5 require managed
1502          * mode to be turned on which means we need to specifically manage ARL
1503          * misses on multicast addresses (TBD).
1504          */
1505         if (is5325(dev) || is5365(dev) || is539x(dev) || is531x5(dev) ||
1506             !b53_can_enable_brcm_tags(ds, port))
1507                 return DSA_TAG_PROTO_NONE;
1508
1509         /* Broadcom BCM58xx chips have a flow accelerator on Port 8
1510          * which requires us to use the prepended Broadcom tag type
1511          */
1512         if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT)
1513                 return DSA_TAG_PROTO_BRCM_PREPEND;
1514
1515         return DSA_TAG_PROTO_BRCM;
1516 }
1517 EXPORT_SYMBOL(b53_get_tag_protocol);
1518
1519 int b53_mirror_add(struct dsa_switch *ds, int port,
1520                    struct dsa_mall_mirror_tc_entry *mirror, bool ingress)
1521 {
1522         struct b53_device *dev = ds->priv;
1523         u16 reg, loc;
1524
1525         if (ingress)
1526                 loc = B53_IG_MIR_CTL;
1527         else
1528                 loc = B53_EG_MIR_CTL;
1529
1530         b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
1531         reg &= ~MIRROR_MASK;
1532         reg |= BIT(port);
1533         b53_write16(dev, B53_MGMT_PAGE, loc, reg);
1534
1535         b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
1536         reg &= ~CAP_PORT_MASK;
1537         reg |= mirror->to_local_port;
1538         reg |= MIRROR_EN;
1539         b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
1540
1541         return 0;
1542 }
1543 EXPORT_SYMBOL(b53_mirror_add);
1544
1545 void b53_mirror_del(struct dsa_switch *ds, int port,
1546                     struct dsa_mall_mirror_tc_entry *mirror)
1547 {
1548         struct b53_device *dev = ds->priv;
1549         bool loc_disable = false, other_loc_disable = false;
1550         u16 reg, loc;
1551
1552         if (mirror->ingress)
1553                 loc = B53_IG_MIR_CTL;
1554         else
1555                 loc = B53_EG_MIR_CTL;
1556
1557         /* Update the desired ingress/egress register */
1558         b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
1559         reg &= ~BIT(port);
1560         if (!(reg & MIRROR_MASK))
1561                 loc_disable = true;
1562         b53_write16(dev, B53_MGMT_PAGE, loc, reg);
1563
1564         /* Now look at the other one to know if we can disable mirroring
1565          * entirely
1566          */
1567         if (mirror->ingress)
1568                 b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, &reg);
1569         else
1570                 b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, &reg);
1571         if (!(reg & MIRROR_MASK))
1572                 other_loc_disable = true;
1573
1574         b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
1575         /* Both no longer have ports, let's disable mirroring */
1576         if (loc_disable && other_loc_disable) {
1577                 reg &= ~MIRROR_EN;
1578                 reg &= ~mirror->to_local_port;
1579         }
1580         b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
1581 }
1582 EXPORT_SYMBOL(b53_mirror_del);
1583
1584 void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
1585 {
1586         struct b53_device *dev = ds->priv;
1587         u16 reg;
1588
1589         b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, &reg);
1590         if (enable)
1591                 reg |= BIT(port);
1592         else
1593                 reg &= ~BIT(port);
1594         b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
1595 }
1596 EXPORT_SYMBOL(b53_eee_enable_set);
1597
1598
1599 /* Returns 0 if EEE was not enabled, or 1 otherwise
1600  */
1601 int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
1602 {
1603         int ret;
1604
1605         ret = phy_init_eee(phy, 0);
1606         if (ret)
1607                 return 0;
1608
1609         b53_eee_enable_set(ds, port, true);
1610
1611         return 1;
1612 }
1613 EXPORT_SYMBOL(b53_eee_init);
1614
1615 int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
1616 {
1617         struct b53_device *dev = ds->priv;
1618         struct ethtool_eee *p = &dev->ports[port].eee;
1619         u16 reg;
1620
1621         if (is5325(dev) || is5365(dev))
1622                 return -EOPNOTSUPP;
1623
1624         b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, &reg);
1625         e->eee_enabled = p->eee_enabled;
1626         e->eee_active = !!(reg & BIT(port));
1627
1628         return 0;
1629 }
1630 EXPORT_SYMBOL(b53_get_mac_eee);
1631
1632 int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
1633 {
1634         struct b53_device *dev = ds->priv;
1635         struct ethtool_eee *p = &dev->ports[port].eee;
1636
1637         if (is5325(dev) || is5365(dev))
1638                 return -EOPNOTSUPP;
1639
1640         p->eee_enabled = e->eee_enabled;
1641         b53_eee_enable_set(ds, port, e->eee_enabled);
1642
1643         return 0;
1644 }
1645 EXPORT_SYMBOL(b53_set_mac_eee);
1646
1647 static const struct dsa_switch_ops b53_switch_ops = {
1648         .get_tag_protocol       = b53_get_tag_protocol,
1649         .setup                  = b53_setup,
1650         .get_strings            = b53_get_strings,
1651         .get_ethtool_stats      = b53_get_ethtool_stats,
1652         .get_sset_count         = b53_get_sset_count,
1653         .phy_read               = b53_phy_read16,
1654         .phy_write              = b53_phy_write16,
1655         .adjust_link            = b53_adjust_link,
1656         .port_enable            = b53_enable_port,
1657         .port_disable           = b53_disable_port,
1658         .get_mac_eee            = b53_get_mac_eee,
1659         .set_mac_eee            = b53_set_mac_eee,
1660         .port_bridge_join       = b53_br_join,
1661         .port_bridge_leave      = b53_br_leave,
1662         .port_stp_state_set     = b53_br_set_stp_state,
1663         .port_fast_age          = b53_br_fast_age,
1664         .port_vlan_filtering    = b53_vlan_filtering,
1665         .port_vlan_prepare      = b53_vlan_prepare,
1666         .port_vlan_add          = b53_vlan_add,
1667         .port_vlan_del          = b53_vlan_del,
1668         .port_fdb_dump          = b53_fdb_dump,
1669         .port_fdb_add           = b53_fdb_add,
1670         .port_fdb_del           = b53_fdb_del,
1671         .port_mirror_add        = b53_mirror_add,
1672         .port_mirror_del        = b53_mirror_del,
1673 };
1674
1675 struct b53_chip_data {
1676         u32 chip_id;
1677         const char *dev_name;
1678         u16 vlans;
1679         u16 enabled_ports;
1680         u8 cpu_port;
1681         u8 vta_regs[3];
1682         u8 arl_entries;
1683         u8 duplex_reg;
1684         u8 jumbo_pm_reg;
1685         u8 jumbo_size_reg;
1686 };
1687
1688 #define B53_VTA_REGS    \
1689         { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
1690 #define B53_VTA_REGS_9798 \
1691         { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
1692 #define B53_VTA_REGS_63XX \
1693         { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
1694
1695 static const struct b53_chip_data b53_switch_chips[] = {
1696         {
1697                 .chip_id = BCM5325_DEVICE_ID,
1698                 .dev_name = "BCM5325",
1699                 .vlans = 16,
1700                 .enabled_ports = 0x1f,
1701                 .arl_entries = 2,
1702                 .cpu_port = B53_CPU_PORT_25,
1703                 .duplex_reg = B53_DUPLEX_STAT_FE,
1704         },
1705         {
1706                 .chip_id = BCM5365_DEVICE_ID,
1707                 .dev_name = "BCM5365",
1708                 .vlans = 256,
1709                 .enabled_ports = 0x1f,
1710                 .arl_entries = 2,
1711                 .cpu_port = B53_CPU_PORT_25,
1712                 .duplex_reg = B53_DUPLEX_STAT_FE,
1713         },
1714         {
1715                 .chip_id = BCM5395_DEVICE_ID,
1716                 .dev_name = "BCM5395",
1717                 .vlans = 4096,
1718                 .enabled_ports = 0x1f,
1719                 .arl_entries = 4,
1720                 .cpu_port = B53_CPU_PORT,
1721                 .vta_regs = B53_VTA_REGS,
1722                 .duplex_reg = B53_DUPLEX_STAT_GE,
1723                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1724                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1725         },
1726         {
1727                 .chip_id = BCM5397_DEVICE_ID,
1728                 .dev_name = "BCM5397",
1729                 .vlans = 4096,
1730                 .enabled_ports = 0x1f,
1731                 .arl_entries = 4,
1732                 .cpu_port = B53_CPU_PORT,
1733                 .vta_regs = B53_VTA_REGS_9798,
1734                 .duplex_reg = B53_DUPLEX_STAT_GE,
1735                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1736                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1737         },
1738         {
1739                 .chip_id = BCM5398_DEVICE_ID,
1740                 .dev_name = "BCM5398",
1741                 .vlans = 4096,
1742                 .enabled_ports = 0x7f,
1743                 .arl_entries = 4,
1744                 .cpu_port = B53_CPU_PORT,
1745                 .vta_regs = B53_VTA_REGS_9798,
1746                 .duplex_reg = B53_DUPLEX_STAT_GE,
1747                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1748                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1749         },
1750         {
1751                 .chip_id = BCM53115_DEVICE_ID,
1752                 .dev_name = "BCM53115",
1753                 .vlans = 4096,
1754                 .enabled_ports = 0x1f,
1755                 .arl_entries = 4,
1756                 .vta_regs = B53_VTA_REGS,
1757                 .cpu_port = B53_CPU_PORT,
1758                 .duplex_reg = B53_DUPLEX_STAT_GE,
1759                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1760                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1761         },
1762         {
1763                 .chip_id = BCM53125_DEVICE_ID,
1764                 .dev_name = "BCM53125",
1765                 .vlans = 4096,
1766                 .enabled_ports = 0xff,
1767                 .arl_entries = 4,
1768                 .cpu_port = B53_CPU_PORT,
1769                 .vta_regs = B53_VTA_REGS,
1770                 .duplex_reg = B53_DUPLEX_STAT_GE,
1771                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1772                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1773         },
1774         {
1775                 .chip_id = BCM53128_DEVICE_ID,
1776                 .dev_name = "BCM53128",
1777                 .vlans = 4096,
1778                 .enabled_ports = 0x1ff,
1779                 .arl_entries = 4,
1780                 .cpu_port = B53_CPU_PORT,
1781                 .vta_regs = B53_VTA_REGS,
1782                 .duplex_reg = B53_DUPLEX_STAT_GE,
1783                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1784                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1785         },
1786         {
1787                 .chip_id = BCM63XX_DEVICE_ID,
1788                 .dev_name = "BCM63xx",
1789                 .vlans = 4096,
1790                 .enabled_ports = 0, /* pdata must provide them */
1791                 .arl_entries = 4,
1792                 .cpu_port = B53_CPU_PORT,
1793                 .vta_regs = B53_VTA_REGS_63XX,
1794                 .duplex_reg = B53_DUPLEX_STAT_63XX,
1795                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
1796                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
1797         },
1798         {
1799                 .chip_id = BCM53010_DEVICE_ID,
1800                 .dev_name = "BCM53010",
1801                 .vlans = 4096,
1802                 .enabled_ports = 0x1f,
1803                 .arl_entries = 4,
1804                 .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
1805                 .vta_regs = B53_VTA_REGS,
1806                 .duplex_reg = B53_DUPLEX_STAT_GE,
1807                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1808                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1809         },
1810         {
1811                 .chip_id = BCM53011_DEVICE_ID,
1812                 .dev_name = "BCM53011",
1813                 .vlans = 4096,
1814                 .enabled_ports = 0x1bf,
1815                 .arl_entries = 4,
1816                 .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
1817                 .vta_regs = B53_VTA_REGS,
1818                 .duplex_reg = B53_DUPLEX_STAT_GE,
1819                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1820                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1821         },
1822         {
1823                 .chip_id = BCM53012_DEVICE_ID,
1824                 .dev_name = "BCM53012",
1825                 .vlans = 4096,
1826                 .enabled_ports = 0x1bf,
1827                 .arl_entries = 4,
1828                 .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
1829                 .vta_regs = B53_VTA_REGS,
1830                 .duplex_reg = B53_DUPLEX_STAT_GE,
1831                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1832                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1833         },
1834         {
1835                 .chip_id = BCM53018_DEVICE_ID,
1836                 .dev_name = "BCM53018",
1837                 .vlans = 4096,
1838                 .enabled_ports = 0x1f,
1839                 .arl_entries = 4,
1840                 .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
1841                 .vta_regs = B53_VTA_REGS,
1842                 .duplex_reg = B53_DUPLEX_STAT_GE,
1843                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1844                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1845         },
1846         {
1847                 .chip_id = BCM53019_DEVICE_ID,
1848                 .dev_name = "BCM53019",
1849                 .vlans = 4096,
1850                 .enabled_ports = 0x1f,
1851                 .arl_entries = 4,
1852                 .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
1853                 .vta_regs = B53_VTA_REGS,
1854                 .duplex_reg = B53_DUPLEX_STAT_GE,
1855                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1856                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1857         },
1858         {
1859                 .chip_id = BCM58XX_DEVICE_ID,
1860                 .dev_name = "BCM585xx/586xx/88312",
1861                 .vlans  = 4096,
1862                 .enabled_ports = 0x1ff,
1863                 .arl_entries = 4,
1864                 .cpu_port = B53_CPU_PORT,
1865                 .vta_regs = B53_VTA_REGS,
1866                 .duplex_reg = B53_DUPLEX_STAT_GE,
1867                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1868                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1869         },
1870         {
1871                 .chip_id = BCM7445_DEVICE_ID,
1872                 .dev_name = "BCM7445",
1873                 .vlans  = 4096,
1874                 .enabled_ports = 0x1ff,
1875                 .arl_entries = 4,
1876                 .cpu_port = B53_CPU_PORT,
1877                 .vta_regs = B53_VTA_REGS,
1878                 .duplex_reg = B53_DUPLEX_STAT_GE,
1879                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1880                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1881         },
1882         {
1883                 .chip_id = BCM7278_DEVICE_ID,
1884                 .dev_name = "BCM7278",
1885                 .vlans = 4096,
1886                 .enabled_ports = 0x1ff,
1887                 .arl_entries= 4,
1888                 .cpu_port = B53_CPU_PORT,
1889                 .vta_regs = B53_VTA_REGS,
1890                 .duplex_reg = B53_DUPLEX_STAT_GE,
1891                 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1892                 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1893         },
1894 };
1895
1896 static int b53_switch_init(struct b53_device *dev)
1897 {
1898         unsigned int i;
1899         int ret;
1900
1901         for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
1902                 const struct b53_chip_data *chip = &b53_switch_chips[i];
1903
1904                 if (chip->chip_id == dev->chip_id) {
1905                         if (!dev->enabled_ports)
1906                                 dev->enabled_ports = chip->enabled_ports;
1907                         dev->name = chip->dev_name;
1908                         dev->duplex_reg = chip->duplex_reg;
1909                         dev->vta_regs[0] = chip->vta_regs[0];
1910                         dev->vta_regs[1] = chip->vta_regs[1];
1911                         dev->vta_regs[2] = chip->vta_regs[2];
1912                         dev->jumbo_pm_reg = chip->jumbo_pm_reg;
1913                         dev->cpu_port = chip->cpu_port;
1914                         dev->num_vlans = chip->vlans;
1915                         dev->num_arl_entries = chip->arl_entries;
1916                         break;
1917                 }
1918         }
1919
1920         /* check which BCM5325x version we have */
1921         if (is5325(dev)) {
1922                 u8 vc4;
1923
1924                 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
1925
1926                 /* check reserved bits */
1927                 switch (vc4 & 3) {
1928                 case 1:
1929                         /* BCM5325E */
1930                         break;
1931                 case 3:
1932                         /* BCM5325F - do not use port 4 */
1933                         dev->enabled_ports &= ~BIT(4);
1934                         break;
1935                 default:
1936 /* On the BCM47XX SoCs this is the supported internal switch.*/
1937 #ifndef CONFIG_BCM47XX
1938                         /* BCM5325M */
1939                         return -EINVAL;
1940 #else
1941                         break;
1942 #endif
1943                 }
1944         } else if (dev->chip_id == BCM53115_DEVICE_ID) {
1945                 u64 strap_value;
1946
1947                 b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value);
1948                 /* use second IMP port if GMII is enabled */
1949                 if (strap_value & SV_GMII_CTRL_115)
1950                         dev->cpu_port = 5;
1951         }
1952
1953         /* cpu port is always last */
1954         dev->num_ports = dev->cpu_port + 1;
1955         dev->enabled_ports |= BIT(dev->cpu_port);
1956
1957         dev->ports = devm_kzalloc(dev->dev,
1958                                   sizeof(struct b53_port) * dev->num_ports,
1959                                   GFP_KERNEL);
1960         if (!dev->ports)
1961                 return -ENOMEM;
1962
1963         dev->vlans = devm_kzalloc(dev->dev,
1964                                   sizeof(struct b53_vlan) * dev->num_vlans,
1965                                   GFP_KERNEL);
1966         if (!dev->vlans)
1967                 return -ENOMEM;
1968
1969         dev->reset_gpio = b53_switch_get_reset_gpio(dev);
1970         if (dev->reset_gpio >= 0) {
1971                 ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
1972                                             GPIOF_OUT_INIT_HIGH, "robo_reset");
1973                 if (ret)
1974                         return ret;
1975         }
1976
1977         return 0;
1978 }
1979
1980 struct b53_device *b53_switch_alloc(struct device *base,
1981                                     const struct b53_io_ops *ops,
1982                                     void *priv)
1983 {
1984         struct dsa_switch *ds;
1985         struct b53_device *dev;
1986
1987         ds = dsa_switch_alloc(base, DSA_MAX_PORTS);
1988         if (!ds)
1989                 return NULL;
1990
1991         dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
1992         if (!dev)
1993                 return NULL;
1994
1995         ds->priv = dev;
1996         dev->dev = base;
1997
1998         dev->ds = ds;
1999         dev->priv = priv;
2000         dev->ops = ops;
2001         ds->ops = &b53_switch_ops;
2002         mutex_init(&dev->reg_mutex);
2003         mutex_init(&dev->stats_mutex);
2004
2005         return dev;
2006 }
2007 EXPORT_SYMBOL(b53_switch_alloc);
2008
2009 int b53_switch_detect(struct b53_device *dev)
2010 {
2011         u32 id32;
2012         u16 tmp;
2013         u8 id8;
2014         int ret;
2015
2016         ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
2017         if (ret)
2018                 return ret;
2019
2020         switch (id8) {
2021         case 0:
2022                 /* BCM5325 and BCM5365 do not have this register so reads
2023                  * return 0. But the read operation did succeed, so assume this
2024                  * is one of them.
2025                  *
2026                  * Next check if we can write to the 5325's VTA register; for
2027                  * 5365 it is read only.
2028                  */
2029                 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
2030                 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
2031
2032                 if (tmp == 0xf)
2033                         dev->chip_id = BCM5325_DEVICE_ID;
2034                 else
2035                         dev->chip_id = BCM5365_DEVICE_ID;
2036                 break;
2037         case BCM5395_DEVICE_ID:
2038         case BCM5397_DEVICE_ID:
2039         case BCM5398_DEVICE_ID:
2040                 dev->chip_id = id8;
2041                 break;
2042         default:
2043                 ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
2044                 if (ret)
2045                         return ret;
2046
2047                 switch (id32) {
2048                 case BCM53115_DEVICE_ID:
2049                 case BCM53125_DEVICE_ID:
2050                 case BCM53128_DEVICE_ID:
2051                 case BCM53010_DEVICE_ID:
2052                 case BCM53011_DEVICE_ID:
2053                 case BCM53012_DEVICE_ID:
2054                 case BCM53018_DEVICE_ID:
2055                 case BCM53019_DEVICE_ID:
2056                         dev->chip_id = id32;
2057                         break;
2058                 default:
2059                         pr_err("unsupported switch detected (BCM53%02x/BCM%x)\n",
2060                                id8, id32);
2061                         return -ENODEV;
2062                 }
2063         }
2064
2065         if (dev->chip_id == BCM5325_DEVICE_ID)
2066                 return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
2067                                  &dev->core_rev);
2068         else
2069                 return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
2070                                  &dev->core_rev);
2071 }
2072 EXPORT_SYMBOL(b53_switch_detect);
2073
2074 int b53_switch_register(struct b53_device *dev)
2075 {
2076         int ret;
2077
2078         if (dev->pdata) {
2079                 dev->chip_id = dev->pdata->chip_id;
2080                 dev->enabled_ports = dev->pdata->enabled_ports;
2081         }
2082
2083         if (!dev->chip_id && b53_switch_detect(dev))
2084                 return -EINVAL;
2085
2086         ret = b53_switch_init(dev);
2087         if (ret)
2088                 return ret;
2089
2090         pr_info("found switch: %s, rev %i\n", dev->name, dev->core_rev);
2091
2092         return dsa_register_switch(dev->ds);
2093 }
2094 EXPORT_SYMBOL(b53_switch_register);
2095
2096 MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
2097 MODULE_DESCRIPTION("B53 switch library");
2098 MODULE_LICENSE("Dual BSD/GPL");