1 /******************************************************************************
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
31 #include "iwl-agn-calib.h"
32 #include "iwl-helpers.h"
34 static int iwlagn_disable_bss(struct iwl_priv *priv,
35 struct iwl_rxon_context *ctx,
36 struct iwl_rxon_cmd *send)
38 __le32 old_filter = send->filter_flags;
41 send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
42 ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, sizeof(*send), send);
44 send->filter_flags = old_filter;
47 IWL_ERR(priv, "Error clearing ASSOC_MSK on BSS (%d)\n", ret);
52 static int iwlagn_disable_pan(struct iwl_priv *priv,
53 struct iwl_rxon_context *ctx,
54 struct iwl_rxon_cmd *send)
56 struct iwl_notification_wait disable_wait;
57 __le32 old_filter = send->filter_flags;
58 u8 old_dev_type = send->dev_type;
61 iwlagn_init_notification_wait(priv, &disable_wait,
62 REPLY_WIPAN_DEACTIVATION_COMPLETE,
65 send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
66 send->dev_type = RXON_DEV_TYPE_P2P;
67 ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, sizeof(*send), send);
69 send->filter_flags = old_filter;
70 send->dev_type = old_dev_type;
73 IWL_ERR(priv, "Error disabling PAN (%d)\n", ret);
74 iwlagn_remove_notification(priv, &disable_wait);
76 ret = iwlagn_wait_notification(priv, &disable_wait, HZ);
78 IWL_ERR(priv, "Timed out waiting for PAN disable\n");
84 static void iwlagn_update_qos(struct iwl_priv *priv,
85 struct iwl_rxon_context *ctx)
92 ctx->qos_data.def_qos_parm.qos_flags = 0;
94 if (ctx->qos_data.qos_active)
95 ctx->qos_data.def_qos_parm.qos_flags |=
96 QOS_PARAM_FLG_UPDATE_EDCA_MSK;
99 ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
101 IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
102 ctx->qos_data.qos_active,
103 ctx->qos_data.def_qos_parm.qos_flags);
105 ret = iwl_send_cmd_pdu(priv, ctx->qos_cmd,
106 sizeof(struct iwl_qosparam_cmd),
107 &ctx->qos_data.def_qos_parm);
109 IWL_ERR(priv, "Failed to update QoS\n");
112 static int iwlagn_update_beacon(struct iwl_priv *priv,
113 struct ieee80211_vif *vif)
115 lockdep_assert_held(&priv->mutex);
117 dev_kfree_skb(priv->beacon_skb);
118 priv->beacon_skb = ieee80211_beacon_get(priv->hw, vif);
119 if (!priv->beacon_skb)
121 return iwlagn_send_beacon_cmd(priv);
125 * iwlagn_commit_rxon - commit staging_rxon to hardware
127 * The RXON command in staging_rxon is committed to the hardware and
128 * the active_rxon structure is updated with the new data. This
129 * function correctly transitions out of the RXON_ASSOC_MSK state if
130 * a HW tune is required based on the RXON structure changes.
132 int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
134 /* cast away the const for active_rxon in this function */
135 struct iwl_rxon_cmd *active = (void *)&ctx->active;
136 bool new_assoc = !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
137 bool old_assoc = !!(ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK);
140 lockdep_assert_held(&priv->mutex);
142 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
145 if (!iwl_is_alive(priv))
148 /* This function hardcodes a bunch of dual-mode assumptions */
149 BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
154 /* always get timestamp with Rx frame */
155 ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
157 if (ctx->ctxid == IWL_RXON_CTX_PAN && priv->_agn.hw_roc_channel) {
158 struct ieee80211_channel *chan = priv->_agn.hw_roc_channel;
160 iwl_set_rxon_channel(priv, chan, ctx);
161 iwl_set_flags_for_band(priv, ctx, chan->band, NULL);
162 ctx->staging.filter_flags |=
163 RXON_FILTER_ASSOC_MSK |
164 RXON_FILTER_PROMISC_MSK |
165 RXON_FILTER_CTL2HOST_MSK;
166 ctx->staging.dev_type = RXON_DEV_TYPE_P2P;
169 if (memcmp(&ctx->staging, &ctx->active,
170 sizeof(ctx->staging)) == 0)
174 if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
175 !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
176 ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
178 ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
180 ret = iwl_check_rxon_cmd(priv, ctx);
182 IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
187 * receive commit_rxon request
188 * abort any previous channel switch if still in process
190 if (priv->switch_rxon.switch_in_progress &&
191 (priv->switch_rxon.channel != ctx->staging.channel)) {
192 IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
193 le16_to_cpu(priv->switch_rxon.channel));
194 iwl_chswitch_done(priv, false);
198 * If we don't need to send a full RXON, we can use
199 * iwl_rxon_assoc_cmd which is used to reconfigure filter
200 * and other flags for the current radio configuration.
202 if (!iwl_full_rxon_required(priv, ctx)) {
203 ret = iwl_send_rxon_assoc(priv, ctx);
205 IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
209 memcpy(active, &ctx->staging, sizeof(*active));
210 iwl_print_rx_config_cmd(priv, ctx);
214 if (priv->cfg->ops->hcmd->set_pan_params) {
215 ret = priv->cfg->ops->hcmd->set_pan_params(priv);
220 iwl_set_rxon_hwcrypto(priv, ctx, !priv->cfg->mod_params->sw_crypto);
223 "Going to commit RXON\n"
224 " * with%s RXON_FILTER_ASSOC_MSK\n"
227 (new_assoc ? "" : "out"),
228 le16_to_cpu(ctx->staging.channel),
229 ctx->staging.bssid_addr);
232 * Always clear associated first, but with the correct config.
233 * This is required as for example station addition for the
234 * AP station must be done after the BSSID is set to correctly
235 * set up filters in the device.
237 if ((old_assoc && new_assoc) || !new_assoc) {
238 if (ctx->ctxid == IWL_RXON_CTX_BSS)
239 ret = iwlagn_disable_bss(priv, ctx, &ctx->staging);
241 ret = iwlagn_disable_pan(priv, ctx, &ctx->staging);
245 memcpy(active, &ctx->staging, sizeof(*active));
248 * Un-assoc RXON clears the station table and WEP
249 * keys, so we have to restore those afterwards.
251 iwl_clear_ucode_stations(priv, ctx);
252 iwl_restore_stations(priv, ctx);
253 ret = iwl_restore_default_wep_keys(priv, ctx);
255 IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
260 /* RXON timing must be before associated RXON */
261 ret = iwl_send_rxon_timing(priv, ctx);
263 IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
268 /* QoS info may be cleared by previous un-assoc RXON */
269 iwlagn_update_qos(priv, ctx);
272 * We'll run into this code path when beaconing is
273 * enabled, but then we also need to send the beacon
276 if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) {
277 ret = iwlagn_update_beacon(priv, ctx->vif);
280 "Error sending required beacon (%d)!\n",
286 priv->start_calib = 0;
288 * Apply the new configuration.
290 * Associated RXON doesn't clear the station table in uCode,
291 * so we don't need to restore stations etc. after this.
293 ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
294 sizeof(struct iwl_rxon_cmd), &ctx->staging);
296 IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
299 memcpy(active, &ctx->staging, sizeof(*active));
301 iwl_reprogram_ap_sta(priv, ctx);
303 /* IBSS beacon needs to be sent after setting assoc */
304 if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC))
305 if (iwlagn_update_beacon(priv, ctx->vif))
306 IWL_ERR(priv, "Error sending IBSS beacon\n");
309 iwl_print_rx_config_cmd(priv, ctx);
311 iwl_init_sensitivity(priv);
314 * If we issue a new RXON command which required a tune then we must
315 * send a new TXPOWER command or we won't be able to Tx any frames.
317 * It's expected we set power here if channel is changing.
319 ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
321 IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
328 int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed)
330 struct iwl_priv *priv = hw->priv;
331 struct iwl_rxon_context *ctx;
332 struct ieee80211_conf *conf = &hw->conf;
333 struct ieee80211_channel *channel = conf->channel;
334 const struct iwl_channel_info *ch_info;
336 bool ht_changed[NUM_IWL_RXON_CTX] = {};
338 IWL_DEBUG_MAC80211(priv, "changed %#x", changed);
340 mutex_lock(&priv->mutex);
342 if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) {
343 IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
347 if (!iwl_is_ready(priv)) {
348 IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
352 if (changed & (IEEE80211_CONF_CHANGE_SMPS |
353 IEEE80211_CONF_CHANGE_CHANNEL)) {
354 /* mac80211 uses static for non-HT which is what we want */
355 priv->current_ht_config.smps = conf->smps_mode;
358 * Recalculate chain counts.
360 * If monitor mode is enabled then mac80211 will
361 * set up the SM PS mode to OFF if an HT channel is
364 if (priv->cfg->ops->hcmd->set_rxon_chain)
365 for_each_context(priv, ctx)
366 priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
369 if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
372 ch_info = iwl_get_channel_info(priv, channel->band,
374 if (!is_channel_valid(ch_info)) {
375 IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
380 spin_lock_irqsave(&priv->lock, flags);
382 for_each_context(priv, ctx) {
383 /* Configure HT40 channels */
384 if (ctx->ht.enabled != conf_is_ht(conf)) {
385 ctx->ht.enabled = conf_is_ht(conf);
386 ht_changed[ctx->ctxid] = true;
389 if (ctx->ht.enabled) {
390 if (conf_is_ht40_minus(conf)) {
391 ctx->ht.extension_chan_offset =
392 IEEE80211_HT_PARAM_CHA_SEC_BELOW;
393 ctx->ht.is_40mhz = true;
394 } else if (conf_is_ht40_plus(conf)) {
395 ctx->ht.extension_chan_offset =
396 IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
397 ctx->ht.is_40mhz = true;
399 ctx->ht.extension_chan_offset =
400 IEEE80211_HT_PARAM_CHA_SEC_NONE;
401 ctx->ht.is_40mhz = false;
404 ctx->ht.is_40mhz = false;
407 * Default to no protection. Protection mode will
408 * later be set from BSS config in iwl_ht_conf
410 ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
412 /* if we are switching from ht to 2.4 clear flags
413 * from any ht related info since 2.4 does not
415 if (le16_to_cpu(ctx->staging.channel) !=
417 ctx->staging.flags = 0;
419 iwl_set_rxon_channel(priv, channel, ctx);
420 iwl_set_rxon_ht(priv, &priv->current_ht_config);
422 iwl_set_flags_for_band(priv, ctx, channel->band,
426 spin_unlock_irqrestore(&priv->lock, flags);
428 iwl_update_bcast_stations(priv);
431 * The list of supported rates and rate mask can be different
432 * for each band; since the band may have changed, reset
433 * the rate mask to what mac80211 lists.
438 if (changed & (IEEE80211_CONF_CHANGE_PS |
439 IEEE80211_CONF_CHANGE_IDLE)) {
440 ret = iwl_power_update_mode(priv, false);
442 IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
445 if (changed & IEEE80211_CONF_CHANGE_POWER) {
446 IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
447 priv->tx_power_user_lmt, conf->power_level);
449 iwl_set_tx_power(priv, conf->power_level, false);
452 for_each_context(priv, ctx) {
453 if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
455 iwlagn_commit_rxon(priv, ctx);
456 if (ht_changed[ctx->ctxid])
457 iwlagn_update_qos(priv, ctx);
460 mutex_unlock(&priv->mutex);
464 static void iwlagn_check_needed_chains(struct iwl_priv *priv,
465 struct iwl_rxon_context *ctx,
466 struct ieee80211_bss_conf *bss_conf)
468 struct ieee80211_vif *vif = ctx->vif;
469 struct iwl_rxon_context *tmp;
470 struct ieee80211_sta *sta;
471 struct iwl_ht_config *ht_conf = &priv->current_ht_config;
472 struct ieee80211_sta_ht_cap *ht_cap;
475 lockdep_assert_held(&priv->mutex);
478 case NL80211_IFTYPE_STATION:
480 sta = ieee80211_find_sta(vif, bss_conf->bssid);
483 * If at all, this can only happen through a race
484 * when the AP disconnects us while we're still
485 * setting up the connection, in that case mac80211
486 * will soon tell us about that.
488 need_multiple = false;
493 ht_cap = &sta->ht_cap;
495 need_multiple = true;
498 * If the peer advertises no support for receiving 2 and 3
499 * stream MCS rates, it can't be transmitting them either.
501 if (ht_cap->mcs.rx_mask[1] == 0 &&
502 ht_cap->mcs.rx_mask[2] == 0) {
503 need_multiple = false;
504 } else if (!(ht_cap->mcs.tx_params &
505 IEEE80211_HT_MCS_TX_DEFINED)) {
506 /* If it can't TX MCS at all ... */
507 need_multiple = false;
508 } else if (ht_cap->mcs.tx_params &
509 IEEE80211_HT_MCS_TX_RX_DIFF) {
513 * But if it can receive them, it might still not
514 * be able to transmit them, which is what we need
515 * to check here -- so check the number of streams
516 * it advertises for TX (if different from RX).
519 maxstreams = (ht_cap->mcs.tx_params &
520 IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK);
522 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
526 need_multiple = false;
531 case NL80211_IFTYPE_ADHOC:
533 need_multiple = false;
537 need_multiple = true;
541 ctx->ht_need_multiple_chains = need_multiple;
543 if (!need_multiple) {
544 /* check all contexts */
545 for_each_context(priv, tmp) {
548 if (tmp->ht_need_multiple_chains) {
549 need_multiple = true;
555 ht_conf->single_chain_sufficient = !need_multiple;
558 void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
559 struct ieee80211_vif *vif,
560 struct ieee80211_bss_conf *bss_conf,
563 struct iwl_priv *priv = hw->priv;
564 struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
568 mutex_lock(&priv->mutex);
570 if (unlikely(!iwl_is_ready(priv))) {
571 IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
572 mutex_unlock(&priv->mutex);
576 if (unlikely(!ctx->vif)) {
577 IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n");
578 mutex_unlock(&priv->mutex);
582 if (changes & BSS_CHANGED_BEACON_INT)
585 if (changes & BSS_CHANGED_QOS) {
586 ctx->qos_data.qos_active = bss_conf->qos;
587 iwlagn_update_qos(priv, ctx);
590 ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
591 if (vif->bss_conf.use_short_preamble)
592 ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
594 ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
596 if (changes & BSS_CHANGED_ASSOC) {
597 if (bss_conf->assoc) {
598 priv->timestamp = bss_conf->timestamp;
599 ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
602 * If we disassociate while there are pending
603 * frames, just wake up the queues and let the
604 * frames "escape" ... This shouldn't really
605 * be happening to start with, but we should
606 * not get stuck in this case either since it
607 * can happen if userspace gets confused.
609 if (ctx->last_tx_rejected) {
610 ctx->last_tx_rejected = false;
611 iwl_wake_any_queue(priv, ctx);
613 ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
617 if (ctx->ht.enabled) {
618 ctx->ht.protection = bss_conf->ht_operation_mode &
619 IEEE80211_HT_OP_MODE_PROTECTION;
620 ctx->ht.non_gf_sta_present = !!(bss_conf->ht_operation_mode &
621 IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
622 iwlagn_check_needed_chains(priv, ctx, bss_conf);
623 iwl_set_rxon_ht(priv, &priv->current_ht_config);
626 if (priv->cfg->ops->hcmd->set_rxon_chain)
627 priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
629 if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
630 ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
632 ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
634 if (bss_conf->use_cts_prot)
635 ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
637 ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
639 memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN);
641 if (vif->type == NL80211_IFTYPE_AP ||
642 vif->type == NL80211_IFTYPE_ADHOC) {
643 if (vif->bss_conf.enable_beacon) {
644 ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
645 priv->beacon_ctx = ctx;
647 ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
648 priv->beacon_ctx = NULL;
652 if (force || memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
653 iwlagn_commit_rxon(priv, ctx);
655 if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc) {
657 * The chain noise calibration will enable PM upon
658 * completion. If calibration has already been run
659 * then we need to enable power management here.
661 if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
662 iwl_power_update_mode(priv, false);
664 /* Enable RX differential gain and sensitivity calibrations */
665 iwl_chain_noise_reset(priv);
666 priv->start_calib = 1;
669 if (changes & BSS_CHANGED_IBSS) {
670 ret = iwlagn_manage_ibss_station(priv, vif,
671 bss_conf->ibss_joined);
673 IWL_ERR(priv, "failed to %s IBSS station %pM\n",
674 bss_conf->ibss_joined ? "add" : "remove",
678 if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC &&
680 if (iwlagn_update_beacon(priv, vif))
681 IWL_ERR(priv, "Error sending IBSS beacon\n");
684 mutex_unlock(&priv->mutex);
687 void iwlagn_post_scan(struct iwl_priv *priv)
689 struct iwl_rxon_context *ctx;
692 * Since setting the RXON may have been deferred while
693 * performing the scan, fire one off if needed
695 for_each_context(priv, ctx)
696 if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
697 iwlagn_commit_rxon(priv, ctx);
699 if (priv->cfg->ops->hcmd->set_pan_params)
700 priv->cfg->ops->hcmd->set_pan_params(priv);