2 * Implement cfg80211 ("iw") support.
4 * Copyright (C) 2009 M&N Solutions GmbH, 61191 Rosbach, Germany
5 * Holger Schurig <hs4233@mail.mn-solutions.de>
9 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
11 #include <linux/hardirq.h>
12 #include <linux/sched.h>
13 #include <linux/wait.h>
14 #include <linux/slab.h>
15 #include <linux/ieee80211.h>
16 #include <net/cfg80211.h>
17 #include <asm/unaligned.h>
25 #define CHAN2G(_channel, _freq, _flags) { \
26 .band = IEEE80211_BAND_2GHZ, \
27 .center_freq = (_freq), \
28 .hw_value = (_channel), \
30 .max_antenna_gain = 0, \
34 static struct ieee80211_channel lbs_2ghz_channels[] = {
51 #define RATETAB_ENT(_rate, _hw_value, _flags) { \
53 .hw_value = (_hw_value), \
58 /* Table 6 in section 3.2.1.1 */
59 static struct ieee80211_rate lbs_rates[] = {
60 RATETAB_ENT(10, 0, 0),
61 RATETAB_ENT(20, 1, 0),
62 RATETAB_ENT(55, 2, 0),
63 RATETAB_ENT(110, 3, 0),
64 RATETAB_ENT(60, 9, 0),
65 RATETAB_ENT(90, 6, 0),
66 RATETAB_ENT(120, 7, 0),
67 RATETAB_ENT(180, 8, 0),
68 RATETAB_ENT(240, 9, 0),
69 RATETAB_ENT(360, 10, 0),
70 RATETAB_ENT(480, 11, 0),
71 RATETAB_ENT(540, 12, 0),
74 static struct ieee80211_supported_band lbs_band_2ghz = {
75 .channels = lbs_2ghz_channels,
76 .n_channels = ARRAY_SIZE(lbs_2ghz_channels),
77 .bitrates = lbs_rates,
78 .n_bitrates = ARRAY_SIZE(lbs_rates),
82 static const u32 cipher_suites[] = {
83 WLAN_CIPHER_SUITE_WEP40,
84 WLAN_CIPHER_SUITE_WEP104,
85 WLAN_CIPHER_SUITE_TKIP,
86 WLAN_CIPHER_SUITE_CCMP,
89 /* Time to stay on the channel */
90 #define LBS_DWELL_PASSIVE 100
91 #define LBS_DWELL_ACTIVE 40
94 /***************************************************************************
95 * Misc utility functions
97 * TLVs are Marvell specific. They are very similar to IEs, they have the
98 * same structure: type, length, data*. The only difference: for IEs, the
99 * type and length are u8, but for TLVs they're __le16.
103 * Convert NL80211's auth_type to the one from Libertas, see chapter 5.9.1
104 * in the firmware spec
106 static int lbs_auth_to_authtype(enum nl80211_auth_type auth_type)
111 case NL80211_AUTHTYPE_OPEN_SYSTEM:
112 case NL80211_AUTHTYPE_SHARED_KEY:
115 case NL80211_AUTHTYPE_AUTOMATIC:
116 ret = NL80211_AUTHTYPE_OPEN_SYSTEM;
118 case NL80211_AUTHTYPE_NETWORK_EAP:
122 /* silence compiler */
130 * Various firmware commands need the list of supported rates, but with
131 * the hight-bit set for basic rates
133 static int lbs_add_rates(u8 *rates)
137 for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) {
138 u8 rate = lbs_rates[i].bitrate / 5;
139 if (rate == 0x02 || rate == 0x04 ||
140 rate == 0x0b || rate == 0x16)
144 return ARRAY_SIZE(lbs_rates);
148 /***************************************************************************
149 * TLV utility functions
151 * TLVs are Marvell specific. They are very similar to IEs, they have the
152 * same structure: type, length, data*. The only difference: for IEs, the
153 * type and length are u8, but for TLVs they're __le16.
160 #define LBS_MAX_SSID_TLV_SIZE \
161 (sizeof(struct mrvl_ie_header) \
162 + IEEE80211_MAX_SSID_LEN)
164 static int lbs_add_ssid_tlv(u8 *tlv, const u8 *ssid, int ssid_len)
166 struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv;
171 * ssid 4d 4e 54 45 53 54
173 ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID);
174 ssid_tlv->header.len = cpu_to_le16(ssid_len);
175 memcpy(ssid_tlv->ssid, ssid, ssid_len);
176 return sizeof(ssid_tlv->header) + ssid_len;
181 * Add channel list TLV (section 8.4.2)
183 * Actual channel data comes from priv->wdev->wiphy->channels.
185 #define LBS_MAX_CHANNEL_LIST_TLV_SIZE \
186 (sizeof(struct mrvl_ie_header) \
187 + (LBS_SCAN_BEFORE_NAP * sizeof(struct chanscanparamset)))
189 static int lbs_add_channel_list_tlv(struct lbs_private *priv, u8 *tlv,
190 int last_channel, int active_scan)
192 int chanscanparamsize = sizeof(struct chanscanparamset) *
193 (last_channel - priv->scan_channel);
195 struct mrvl_ie_header *header = (void *) tlv;
198 * TLV-ID CHANLIST 01 01
200 * channel 00 01 00 00 00 64 00
204 * min scan time 00 00
205 * max scan time 64 00
206 * channel 2 00 02 00 00 00 64 00
210 header->type = cpu_to_le16(TLV_TYPE_CHANLIST);
211 header->len = cpu_to_le16(chanscanparamsize);
212 tlv += sizeof(struct mrvl_ie_header);
214 /* lbs_deb_scan("scan: channels %d to %d\n", priv->scan_channel,
216 memset(tlv, 0, chanscanparamsize);
218 while (priv->scan_channel < last_channel) {
219 struct chanscanparamset *param = (void *) tlv;
221 param->radiotype = CMD_SCAN_RADIO_TYPE_BG;
223 priv->scan_req->channels[priv->scan_channel]->hw_value;
225 param->maxscantime = cpu_to_le16(LBS_DWELL_ACTIVE);
227 param->chanscanmode.passivescan = 1;
228 param->maxscantime = cpu_to_le16(LBS_DWELL_PASSIVE);
230 tlv += sizeof(struct chanscanparamset);
231 priv->scan_channel++;
233 return sizeof(struct mrvl_ie_header) + chanscanparamsize;
240 * The rates are in lbs_bg_rates[], but for the 802.11b
241 * rates the high bit is set. We add this TLV only because
242 * there's a firmware which otherwise doesn't report all
245 #define LBS_MAX_RATES_TLV_SIZE \
246 (sizeof(struct mrvl_ie_header) \
247 + (ARRAY_SIZE(lbs_rates)))
249 /* Adds a TLV with all rates the hardware supports */
250 static int lbs_add_supported_rates_tlv(u8 *tlv)
253 struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv;
258 * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c
260 rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES);
261 tlv += sizeof(rate_tlv->header);
262 i = lbs_add_rates(tlv);
264 rate_tlv->header.len = cpu_to_le16(i);
265 return sizeof(rate_tlv->header) + i;
268 /* Add common rates from a TLV and return the new end of the TLV */
270 add_ie_rates(u8 *tlv, const u8 *ie, int *nrates)
272 int hw, ap, ap_max = ie[1];
275 /* Advance past IE header */
278 lbs_deb_hex(LBS_DEB_ASSOC, "AP IE Rates", (u8 *) ie, ap_max);
280 for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) {
281 hw_rate = lbs_rates[hw].bitrate / 5;
282 for (ap = 0; ap < ap_max; ap++) {
283 if (hw_rate == (ie[ap] & 0x7f)) {
285 *nrates = *nrates + 1;
293 * Adds a TLV with all rates the hardware *and* BSS supports.
295 static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss)
297 struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv;
298 const u8 *rates_eid, *ext_rates_eid;
301 rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES);
302 ext_rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_EXT_SUPP_RATES);
305 * 01 00 TLV_TYPE_RATES
309 rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES);
310 tlv += sizeof(rate_tlv->header);
312 /* Add basic rates */
314 tlv = add_ie_rates(tlv, rates_eid, &n);
316 /* Add extended rates, if any */
318 tlv = add_ie_rates(tlv, ext_rates_eid, &n);
320 lbs_deb_assoc("assoc: bss had no basic rate IE\n");
321 /* Fallback: add basic 802.11b rates */
329 rate_tlv->header.len = cpu_to_le16(n);
330 return sizeof(rate_tlv->header) + n;
337 * This is only needed for newer firmware (V9 and up).
339 #define LBS_MAX_AUTH_TYPE_TLV_SIZE \
340 sizeof(struct mrvl_ie_auth_type)
342 static int lbs_add_auth_type_tlv(u8 *tlv, enum nl80211_auth_type auth_type)
344 struct mrvl_ie_auth_type *auth = (void *) tlv;
347 * 1f 01 TLV_TYPE_AUTH_TYPE
351 auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE);
352 auth->header.len = cpu_to_le16(sizeof(*auth)-sizeof(auth->header));
353 auth->auth = cpu_to_le16(lbs_auth_to_authtype(auth_type));
354 return sizeof(*auth);
359 * Add channel (phy ds) TLV
361 #define LBS_MAX_CHANNEL_TLV_SIZE \
362 sizeof(struct mrvl_ie_header)
364 static int lbs_add_channel_tlv(u8 *tlv, u8 channel)
366 struct mrvl_ie_ds_param_set *ds = (void *) tlv;
369 * 03 00 TLV_TYPE_PHY_DS
373 ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS);
374 ds->header.len = cpu_to_le16(sizeof(*ds)-sizeof(ds->header));
375 ds->channel = channel;
381 * Add (empty) CF param TLV of the form:
383 #define LBS_MAX_CF_PARAM_TLV_SIZE \
384 sizeof(struct mrvl_ie_header)
386 static int lbs_add_cf_param_tlv(u8 *tlv)
388 struct mrvl_ie_cf_param_set *cf = (void *)tlv;
395 * 00 00 cfpmaxduration
396 * 00 00 cfpdurationremaining
398 cf->header.type = cpu_to_le16(TLV_TYPE_CF);
399 cf->header.len = cpu_to_le16(sizeof(*cf)-sizeof(cf->header));
406 #define LBS_MAX_WPA_TLV_SIZE \
407 (sizeof(struct mrvl_ie_header) \
408 + 128 /* TODO: I guessed the size */)
410 static int lbs_add_wpa_tlv(u8 *tlv, const u8 *ie, u8 ie_len)
415 * We need just convert an IE to an TLV. IEs use u8 for the header,
419 * but TLVs use __le16 instead:
426 tlv_len = *tlv++ = *ie++;
430 /* the TLV is two bytes larger than the IE */
438 static int lbs_cfg_set_channel(struct wiphy *wiphy,
439 struct net_device *netdev,
440 struct ieee80211_channel *channel,
441 enum nl80211_channel_type channel_type)
443 struct lbs_private *priv = wiphy_priv(wiphy);
446 lbs_deb_enter_args(LBS_DEB_CFG80211, "iface %s freq %d, type %d",
447 netdev_name(netdev), channel->center_freq, channel_type);
449 if (channel_type != NL80211_CHAN_NO_HT)
452 if (netdev == priv->mesh_dev)
453 ret = lbs_mesh_set_channel(priv, channel->hw_value);
455 ret = lbs_set_channel(priv, channel->hw_value);
458 lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
469 * When scanning, the firmware doesn't send a nul packet with the power-safe
470 * bit to the AP. So we cannot stay away from our current channel too long,
471 * otherwise we loose data. So take a "nap" while scanning every other
474 #define LBS_SCAN_BEFORE_NAP 4
478 * When the firmware reports back a scan-result, it gives us an "u8 rssi",
479 * which isn't really an RSSI, as it becomes larger when moving away from
480 * the AP. Anyway, we need to convert that into mBm.
482 #define LBS_SCAN_RSSI_TO_MBM(rssi) \
483 ((-(int)rssi + 3)*100)
485 static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy,
486 struct cmd_header *resp)
488 struct cfg80211_bss *bss;
489 struct cmd_ds_802_11_scan_rsp *scanresp = (void *)resp;
497 lbs_deb_enter(LBS_DEB_CFG80211);
499 bsssize = get_unaligned_le16(&scanresp->bssdescriptsize);
501 lbs_deb_scan("scan response: %d BSSs (%d bytes); resp size %d bytes\n",
502 scanresp->nr_sets, bsssize, le16_to_cpu(resp->size));
504 if (scanresp->nr_sets == 0) {
510 * The general layout of the scan response is described in chapter
511 * 5.7.1. Basically we have a common part, then any number of BSS
512 * descriptor sections. Finally we have section with the same number
515 * cmd_ds_802_11_scan_rsp
528 * MrvlIEtypes_TsfFimestamp_t
534 pos = scanresp->bssdesc_and_tlvbuffer;
536 lbs_deb_hex(LBS_DEB_SCAN, "SCAN_RSP", scanresp->bssdesc_and_tlvbuffer,
537 scanresp->bssdescriptsize);
539 tsfdesc = pos + bsssize;
540 tsfsize = 4 + 8 * scanresp->nr_sets;
541 lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TSF", (u8 *) tsfdesc, tsfsize);
543 /* Validity check: we expect a Marvell-Local TLV */
544 i = get_unaligned_le16(tsfdesc);
546 if (i != TLV_TYPE_TSFTIMESTAMP) {
547 lbs_deb_scan("scan response: invalid TSF Timestamp %d\n", i);
552 * Validity check: the TLV holds TSF values with 8 bytes each, so
553 * the size in the TLV must match the nr_sets value
555 i = get_unaligned_le16(tsfdesc);
557 if (i / 8 != scanresp->nr_sets) {
558 lbs_deb_scan("scan response: invalid number of TSF timestamp "
559 "sets (expected %d got %d)\n", scanresp->nr_sets,
564 for (i = 0; i < scanresp->nr_sets; i++) {
573 const u8 *ssid = NULL;
575 DECLARE_SSID_BUF(ssid_buf);
577 int len = get_unaligned_le16(pos);
585 /* Packet time stamp */
587 /* Beacon interval */
588 intvl = get_unaligned_le16(pos);
591 capa = get_unaligned_le16(pos);
594 /* To find out the channel, we must parse the IEs */
597 * 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon
598 * interval, capabilities
600 ielen = left = len - (6 + 1 + 8 + 2 + 2);
606 if (elen > left || elen == 0) {
607 lbs_deb_scan("scan response: invalid IE fmt\n");
611 if (id == WLAN_EID_DS_PARAMS)
613 if (id == WLAN_EID_SSID) {
621 /* No channel, no luck */
623 struct wiphy *wiphy = priv->wdev->wiphy;
624 int freq = ieee80211_channel_to_frequency(chan_no,
625 IEEE80211_BAND_2GHZ);
626 struct ieee80211_channel *channel =
627 ieee80211_get_channel(wiphy, freq);
629 lbs_deb_scan("scan: %pM, capa %04x, chan %2d, %s, "
631 bssid, capa, chan_no,
632 print_ssid(ssid_buf, ssid, ssid_len),
633 LBS_SCAN_RSSI_TO_MBM(rssi)/100);
636 !(channel->flags & IEEE80211_CHAN_DISABLED)) {
637 bss = cfg80211_inform_bss(wiphy, channel,
638 bssid, get_unaligned_le64(tsfdesc),
639 capa, intvl, ie, ielen,
640 LBS_SCAN_RSSI_TO_MBM(rssi),
642 cfg80211_put_bss(bss);
645 lbs_deb_scan("scan response: missing BSS channel IE\n");
652 lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret);
658 * Our scan command contains a TLV, consting of a SSID TLV, a channel list
659 * TLV and a rates TLV. Determine the maximum size of them:
661 #define LBS_SCAN_MAX_CMD_SIZE \
662 (sizeof(struct cmd_ds_802_11_scan) \
663 + LBS_MAX_SSID_TLV_SIZE \
664 + LBS_MAX_CHANNEL_LIST_TLV_SIZE \
665 + LBS_MAX_RATES_TLV_SIZE)
668 * Assumes priv->scan_req is initialized and valid
669 * Assumes priv->scan_channel is initialized
671 static void lbs_scan_worker(struct work_struct *work)
673 struct lbs_private *priv =
674 container_of(work, struct lbs_private, scan_work.work);
675 struct cmd_ds_802_11_scan *scan_cmd;
676 u8 *tlv; /* pointer into our current, growing TLV storage area */
678 int running, carrier;
680 lbs_deb_enter(LBS_DEB_SCAN);
682 scan_cmd = kzalloc(LBS_SCAN_MAX_CMD_SIZE, GFP_KERNEL);
683 if (scan_cmd == NULL)
684 goto out_no_scan_cmd;
686 /* prepare fixed part of scan command */
687 scan_cmd->bsstype = CMD_BSS_TYPE_ANY;
689 /* stop network while we're away from our main channel */
690 running = !netif_queue_stopped(priv->dev);
691 carrier = netif_carrier_ok(priv->dev);
693 netif_stop_queue(priv->dev);
695 netif_carrier_off(priv->dev);
697 /* prepare fixed part of scan command */
698 tlv = scan_cmd->tlvbuffer;
701 if (priv->scan_req->n_ssids && priv->scan_req->ssids[0].ssid_len > 0)
702 tlv += lbs_add_ssid_tlv(tlv,
703 priv->scan_req->ssids[0].ssid,
704 priv->scan_req->ssids[0].ssid_len);
706 /* add channel TLVs */
707 last_channel = priv->scan_channel + LBS_SCAN_BEFORE_NAP;
708 if (last_channel > priv->scan_req->n_channels)
709 last_channel = priv->scan_req->n_channels;
710 tlv += lbs_add_channel_list_tlv(priv, tlv, last_channel,
711 priv->scan_req->n_ssids);
714 tlv += lbs_add_supported_rates_tlv(tlv);
716 if (priv->scan_channel < priv->scan_req->n_channels) {
717 cancel_delayed_work(&priv->scan_work);
718 if (netif_running(priv->dev))
719 queue_delayed_work(priv->work_thread, &priv->scan_work,
720 msecs_to_jiffies(300));
723 /* This is the final data we are about to send */
724 scan_cmd->hdr.size = cpu_to_le16(tlv - (u8 *)scan_cmd);
725 lbs_deb_hex(LBS_DEB_SCAN, "SCAN_CMD", (void *)scan_cmd,
727 lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TLV", scan_cmd->tlvbuffer,
728 tlv - scan_cmd->tlvbuffer);
730 __lbs_cmd(priv, CMD_802_11_SCAN, &scan_cmd->hdr,
731 le16_to_cpu(scan_cmd->hdr.size),
734 if (priv->scan_channel >= priv->scan_req->n_channels) {
736 cancel_delayed_work(&priv->scan_work);
740 /* Restart network */
742 netif_carrier_on(priv->dev);
743 if (running && !priv->tx_pending_len)
744 netif_wake_queue(priv->dev);
748 /* Wake up anything waiting on scan completion */
749 if (priv->scan_req == NULL) {
750 lbs_deb_scan("scan: waking up waiters\n");
751 wake_up_all(&priv->scan_q);
755 lbs_deb_leave(LBS_DEB_SCAN);
758 static void _internal_start_scan(struct lbs_private *priv, bool internal,
759 struct cfg80211_scan_request *request)
761 lbs_deb_enter(LBS_DEB_CFG80211);
763 lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n",
764 request->n_ssids, request->n_channels, request->ie_len);
766 priv->scan_channel = 0;
767 priv->scan_req = request;
768 priv->internal_scan = internal;
770 queue_delayed_work(priv->work_thread, &priv->scan_work,
771 msecs_to_jiffies(50));
773 lbs_deb_leave(LBS_DEB_CFG80211);
777 * Clean up priv->scan_req. Should be used to handle the allocation details.
779 void lbs_scan_done(struct lbs_private *priv)
781 WARN_ON(!priv->scan_req);
783 if (priv->internal_scan)
784 kfree(priv->scan_req);
786 cfg80211_scan_done(priv->scan_req, false);
788 priv->scan_req = NULL;
791 static int lbs_cfg_scan(struct wiphy *wiphy,
792 struct net_device *dev,
793 struct cfg80211_scan_request *request)
795 struct lbs_private *priv = wiphy_priv(wiphy);
798 lbs_deb_enter(LBS_DEB_CFG80211);
800 if (priv->scan_req || delayed_work_pending(&priv->scan_work)) {
801 /* old scan request not yet processed */
806 _internal_start_scan(priv, false, request);
808 if (priv->surpriseremoved)
812 lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
823 void lbs_send_disconnect_notification(struct lbs_private *priv)
825 lbs_deb_enter(LBS_DEB_CFG80211);
827 cfg80211_disconnected(priv->dev,
832 lbs_deb_leave(LBS_DEB_CFG80211);
835 void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event)
837 lbs_deb_enter(LBS_DEB_CFG80211);
839 cfg80211_michael_mic_failure(priv->dev,
841 event == MACREG_INT_CODE_MIC_ERR_MULTICAST ?
842 NL80211_KEYTYPE_GROUP :
843 NL80211_KEYTYPE_PAIRWISE,
848 lbs_deb_leave(LBS_DEB_CFG80211);
860 * This removes all WEP keys
862 static int lbs_remove_wep_keys(struct lbs_private *priv)
864 struct cmd_ds_802_11_set_wep cmd;
867 lbs_deb_enter(LBS_DEB_CFG80211);
869 memset(&cmd, 0, sizeof(cmd));
870 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
871 cmd.keyindex = cpu_to_le16(priv->wep_tx_key);
872 cmd.action = cpu_to_le16(CMD_ACT_REMOVE);
874 ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd);
876 lbs_deb_leave(LBS_DEB_CFG80211);
883 static int lbs_set_wep_keys(struct lbs_private *priv)
885 struct cmd_ds_802_11_set_wep cmd;
889 lbs_deb_enter(LBS_DEB_CFG80211);
896 * action 02 00 ACT_ADD
898 * type for key 1 01 WEP40
902 * key 1 39 39 39 39 39 00 00 00
903 * 00 00 00 00 00 00 00 00
904 * key 2 00 00 00 00 00 00 00 00
905 * 00 00 00 00 00 00 00 00
906 * key 3 00 00 00 00 00 00 00 00
907 * 00 00 00 00 00 00 00 00
908 * key 4 00 00 00 00 00 00 00 00
910 if (priv->wep_key_len[0] || priv->wep_key_len[1] ||
911 priv->wep_key_len[2] || priv->wep_key_len[3]) {
912 /* Only set wep keys if we have at least one of them */
913 memset(&cmd, 0, sizeof(cmd));
914 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
915 cmd.keyindex = cpu_to_le16(priv->wep_tx_key);
916 cmd.action = cpu_to_le16(CMD_ACT_ADD);
918 for (i = 0; i < 4; i++) {
919 switch (priv->wep_key_len[i]) {
920 case WLAN_KEY_LEN_WEP40:
921 cmd.keytype[i] = CMD_TYPE_WEP_40_BIT;
923 case WLAN_KEY_LEN_WEP104:
924 cmd.keytype[i] = CMD_TYPE_WEP_104_BIT;
930 memcpy(cmd.keymaterial[i], priv->wep_key[i],
931 priv->wep_key_len[i]);
934 ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd);
936 /* Otherwise remove all wep keys */
937 ret = lbs_remove_wep_keys(priv);
940 lbs_deb_leave(LBS_DEB_CFG80211);
946 * Enable/Disable RSN status
948 static int lbs_enable_rsn(struct lbs_private *priv, int enable)
950 struct cmd_ds_802_11_enable_rsn cmd;
953 lbs_deb_enter_args(LBS_DEB_CFG80211, "%d", enable);
960 * action 01 00 ACT_SET
963 memset(&cmd, 0, sizeof(cmd));
964 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
965 cmd.action = cpu_to_le16(CMD_ACT_SET);
966 cmd.enable = cpu_to_le16(enable);
968 ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd);
970 lbs_deb_leave(LBS_DEB_CFG80211);
976 * Set WPA/WPA key material
980 * like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we
981 * get rid of WEXT, this should go into host.h
984 struct cmd_key_material {
985 struct cmd_header hdr;
988 struct MrvlIEtype_keyParamSet param;
991 static int lbs_set_key_material(struct lbs_private *priv,
994 u8 *key, u16 key_len)
996 struct cmd_key_material cmd;
999 lbs_deb_enter(LBS_DEB_CFG80211);
1002 * Example for WPA (TKIP):
1009 * TLV type 00 01 key param
1011 * key type 01 00 TKIP
1012 * key info 06 00 UNICAST | ENABLED
1016 memset(&cmd, 0, sizeof(cmd));
1017 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1018 cmd.action = cpu_to_le16(CMD_ACT_SET);
1019 cmd.param.type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL);
1020 cmd.param.length = cpu_to_le16(sizeof(cmd.param) - 4);
1021 cmd.param.keytypeid = cpu_to_le16(key_type);
1022 cmd.param.keyinfo = cpu_to_le16(key_info);
1023 cmd.param.keylen = cpu_to_le16(key_len);
1025 memcpy(cmd.param.key, key, key_len);
1027 ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd);
1029 lbs_deb_leave(LBS_DEB_CFG80211);
1035 * Sets the auth type (open, shared, etc) in the firmware. That
1036 * we use CMD_802_11_AUTHENTICATE is misleading, this firmware
1037 * command doesn't send an authentication frame at all, it just
1038 * stores the auth_type.
1040 static int lbs_set_authtype(struct lbs_private *priv,
1041 struct cfg80211_connect_params *sme)
1043 struct cmd_ds_802_11_authenticate cmd;
1046 lbs_deb_enter_args(LBS_DEB_CFG80211, "%d", sme->auth_type);
1053 * BSS id 00 13 19 80 da 30
1055 * reserved 00 00 00 00 00 00 00 00 00 00
1057 memset(&cmd, 0, sizeof(cmd));
1058 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1060 memcpy(cmd.bssid, sme->bssid, ETH_ALEN);
1061 /* convert auth_type */
1062 ret = lbs_auth_to_authtype(sme->auth_type);
1067 ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd);
1070 lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
1076 * Create association request
1078 #define LBS_ASSOC_MAX_CMD_SIZE \
1079 (sizeof(struct cmd_ds_802_11_associate) \
1080 - 512 /* cmd_ds_802_11_associate.iebuf */ \
1081 + LBS_MAX_SSID_TLV_SIZE \
1082 + LBS_MAX_CHANNEL_TLV_SIZE \
1083 + LBS_MAX_CF_PARAM_TLV_SIZE \
1084 + LBS_MAX_AUTH_TYPE_TLV_SIZE \
1085 + LBS_MAX_WPA_TLV_SIZE)
1087 static int lbs_associate(struct lbs_private *priv,
1088 struct cfg80211_bss *bss,
1089 struct cfg80211_connect_params *sme)
1091 struct cmd_ds_802_11_associate_response *resp;
1092 struct cmd_ds_802_11_associate *cmd = kzalloc(LBS_ASSOC_MAX_CMD_SIZE,
1095 size_t len, resp_ie_len;
1098 u8 *pos = &(cmd->iebuf[0]);
1101 lbs_deb_enter(LBS_DEB_CFG80211);
1113 * BSS id 00 13 19 80 da 30
1114 * capabilities 11 00
1115 * listen interval 0a 00
1116 * beacon interval 00 00
1118 * TLVs xx (up to 512 bytes)
1120 cmd->hdr.command = cpu_to_le16(CMD_802_11_ASSOCIATE);
1122 /* Fill in static fields */
1123 memcpy(cmd->bssid, bss->bssid, ETH_ALEN);
1124 cmd->listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL);
1125 cmd->capability = cpu_to_le16(bss->capability);
1128 ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID);
1130 pos += lbs_add_ssid_tlv(pos, ssid_eid + 2, ssid_eid[1]);
1132 lbs_deb_assoc("no SSID\n");
1134 /* add DS param TLV */
1136 pos += lbs_add_channel_tlv(pos, bss->channel->hw_value);
1138 lbs_deb_assoc("no channel\n");
1140 /* add (empty) CF param TLV */
1141 pos += lbs_add_cf_param_tlv(pos);
1144 tmp = pos + 4; /* skip Marvell IE header */
1145 pos += lbs_add_common_rates_tlv(pos, bss);
1146 lbs_deb_hex(LBS_DEB_ASSOC, "Common Rates", tmp, pos - tmp);
1148 /* add auth type TLV */
1149 if (MRVL_FW_MAJOR_REV(priv->fwrelease) >= 9)
1150 pos += lbs_add_auth_type_tlv(pos, sme->auth_type);
1152 /* add WPA/WPA2 TLV */
1153 if (sme->ie && sme->ie_len)
1154 pos += lbs_add_wpa_tlv(pos, sme->ie, sme->ie_len);
1156 len = (sizeof(*cmd) - sizeof(cmd->iebuf)) +
1157 (u16)(pos - (u8 *) &cmd->iebuf);
1158 cmd->hdr.size = cpu_to_le16(len);
1160 lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_CMD", (u8 *) cmd,
1161 le16_to_cpu(cmd->hdr.size));
1163 /* store for later use */
1164 memcpy(priv->assoc_bss, bss->bssid, ETH_ALEN);
1166 ret = lbs_cmd_with_response(priv, CMD_802_11_ASSOCIATE, cmd);
1170 /* generate connect message to cfg80211 */
1172 resp = (void *) cmd; /* recast for easier field access */
1173 status = le16_to_cpu(resp->statuscode);
1175 /* Older FW versions map the IEEE 802.11 Status Code in the association
1176 * response to the following values returned in resp->statuscode:
1178 * IEEE Status Code Marvell Status Code
1179 * 0 -> 0x0000 ASSOC_RESULT_SUCCESS
1180 * 13 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED
1181 * 14 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED
1182 * 15 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED
1183 * 16 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED
1184 * others -> 0x0003 ASSOC_RESULT_REFUSED
1186 * Other response codes:
1187 * 0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused)
1188 * 0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for
1189 * association response from the AP)
1191 if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) {
1196 lbs_deb_assoc("invalid association parameters\n");
1197 status = WLAN_STATUS_CAPS_UNSUPPORTED;
1200 lbs_deb_assoc("timer expired while waiting for AP\n");
1201 status = WLAN_STATUS_AUTH_TIMEOUT;
1204 lbs_deb_assoc("association refused by AP\n");
1205 status = WLAN_STATUS_ASSOC_DENIED_UNSPEC;
1208 lbs_deb_assoc("authentication refused by AP\n");
1209 status = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION;
1212 lbs_deb_assoc("association failure %d\n", status);
1213 /* v5 OLPC firmware does return the AP status code if
1214 * it's not one of the values above. Let that through.
1220 lbs_deb_assoc("status %d, statuscode 0x%04x, capability 0x%04x, "
1221 "aid 0x%04x\n", status, le16_to_cpu(resp->statuscode),
1222 le16_to_cpu(resp->capability), le16_to_cpu(resp->aid));
1224 resp_ie_len = le16_to_cpu(resp->hdr.size)
1227 cfg80211_connect_result(priv->dev,
1229 sme->ie, sme->ie_len,
1230 resp->iebuf, resp_ie_len,
1235 /* TODO: get rid of priv->connect_status */
1236 priv->connect_status = LBS_CONNECTED;
1237 netif_carrier_on(priv->dev);
1238 if (!priv->tx_pending_len)
1239 netif_tx_wake_all_queues(priv->dev);
1243 lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
1247 static struct cfg80211_scan_request *
1248 _new_connect_scan_req(struct wiphy *wiphy, struct cfg80211_connect_params *sme)
1250 struct cfg80211_scan_request *creq = NULL;
1251 int i, n_channels = 0;
1252 enum ieee80211_band band;
1254 for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
1255 if (wiphy->bands[band])
1256 n_channels += wiphy->bands[band]->n_channels;
1259 creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) +
1260 n_channels * sizeof(void *),
1265 /* SSIDs come after channels */
1266 creq->ssids = (void *)&creq->channels[n_channels];
1267 creq->n_channels = n_channels;
1270 /* Scan all available channels */
1272 for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
1275 if (!wiphy->bands[band])
1278 for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
1279 /* ignore disabled channels */
1280 if (wiphy->bands[band]->channels[j].flags &
1281 IEEE80211_CHAN_DISABLED)
1284 creq->channels[i] = &wiphy->bands[band]->channels[j];
1289 /* Set real number of channels specified in creq->channels[] */
1290 creq->n_channels = i;
1292 /* Scan for the SSID we're going to connect to */
1293 memcpy(creq->ssids[0].ssid, sme->ssid, sme->ssid_len);
1294 creq->ssids[0].ssid_len = sme->ssid_len;
1296 /* No channels found... */
1304 static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
1305 struct cfg80211_connect_params *sme)
1307 struct lbs_private *priv = wiphy_priv(wiphy);
1308 struct cfg80211_bss *bss = NULL;
1310 u8 preamble = RADIO_PREAMBLE_SHORT;
1312 if (dev == priv->mesh_dev)
1315 lbs_deb_enter(LBS_DEB_CFG80211);
1318 struct cfg80211_scan_request *creq;
1321 * Scan for the requested network after waiting for existing
1324 lbs_deb_assoc("assoc: waiting for existing scans\n");
1325 wait_event_interruptible_timeout(priv->scan_q,
1326 (priv->scan_req == NULL),
1329 creq = _new_connect_scan_req(wiphy, sme);
1335 lbs_deb_assoc("assoc: scanning for compatible AP\n");
1336 _internal_start_scan(priv, true, creq);
1338 lbs_deb_assoc("assoc: waiting for scan to complete\n");
1339 wait_event_interruptible_timeout(priv->scan_q,
1340 (priv->scan_req == NULL),
1342 lbs_deb_assoc("assoc: scanning competed\n");
1345 /* Find the BSS we want using available scan results */
1346 bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
1347 sme->ssid, sme->ssid_len,
1348 WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
1350 wiphy_err(wiphy, "assoc: bss %pM not in scan results\n",
1355 lbs_deb_assoc("trying %pM\n", bss->bssid);
1356 lbs_deb_assoc("cipher 0x%x, key index %d, key len %d\n",
1357 sme->crypto.cipher_group,
1358 sme->key_idx, sme->key_len);
1360 /* As this is a new connection, clear locally stored WEP keys */
1361 priv->wep_tx_key = 0;
1362 memset(priv->wep_key, 0, sizeof(priv->wep_key));
1363 memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len));
1365 /* set/remove WEP keys */
1366 switch (sme->crypto.cipher_group) {
1367 case WLAN_CIPHER_SUITE_WEP40:
1368 case WLAN_CIPHER_SUITE_WEP104:
1369 /* Store provided WEP keys in priv-> */
1370 priv->wep_tx_key = sme->key_idx;
1371 priv->wep_key_len[sme->key_idx] = sme->key_len;
1372 memcpy(priv->wep_key[sme->key_idx], sme->key, sme->key_len);
1373 /* Set WEP keys and WEP mode */
1374 lbs_set_wep_keys(priv);
1375 priv->mac_control |= CMD_ACT_MAC_WEP_ENABLE;
1376 lbs_set_mac_control(priv);
1377 /* No RSN mode for WEP */
1378 lbs_enable_rsn(priv, 0);
1380 case 0: /* there's no WLAN_CIPHER_SUITE_NONE definition */
1382 * If we don't have no WEP, no WPA and no WPA2,
1383 * we remove all keys like in the WPA/WPA2 setup,
1384 * we just don't set RSN.
1386 * Therefore: fall-through
1388 case WLAN_CIPHER_SUITE_TKIP:
1389 case WLAN_CIPHER_SUITE_CCMP:
1390 /* Remove WEP keys and WEP mode */
1391 lbs_remove_wep_keys(priv);
1392 priv->mac_control &= ~CMD_ACT_MAC_WEP_ENABLE;
1393 lbs_set_mac_control(priv);
1395 /* clear the WPA/WPA2 keys */
1396 lbs_set_key_material(priv,
1397 KEY_TYPE_ID_WEP, /* doesn't matter */
1398 KEY_INFO_WPA_UNICAST,
1400 lbs_set_key_material(priv,
1401 KEY_TYPE_ID_WEP, /* doesn't matter */
1404 /* RSN mode for WPA/WPA2 */
1405 lbs_enable_rsn(priv, sme->crypto.cipher_group != 0);
1408 wiphy_err(wiphy, "unsupported cipher group 0x%x\n",
1409 sme->crypto.cipher_group);
1414 ret = lbs_set_authtype(priv, sme);
1415 if (ret == -ENOTSUPP) {
1416 wiphy_err(wiphy, "unsupported authtype 0x%x\n", sme->auth_type);
1420 lbs_set_radio(priv, preamble, 1);
1422 /* Do the actual association */
1423 ret = lbs_associate(priv, bss, sme);
1427 cfg80211_put_bss(bss);
1428 lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
1432 int lbs_disconnect(struct lbs_private *priv, u16 reason)
1434 struct cmd_ds_802_11_deauthenticate cmd;
1437 memset(&cmd, 0, sizeof(cmd));
1438 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1439 /* Mildly ugly to use a locally store my own BSSID ... */
1440 memcpy(cmd.macaddr, &priv->assoc_bss, ETH_ALEN);
1441 cmd.reasoncode = cpu_to_le16(reason);
1443 ret = lbs_cmd_with_response(priv, CMD_802_11_DEAUTHENTICATE, &cmd);
1447 cfg80211_disconnected(priv->dev,
1451 priv->connect_status = LBS_DISCONNECTED;
1456 static int lbs_cfg_disconnect(struct wiphy *wiphy, struct net_device *dev,
1459 struct lbs_private *priv = wiphy_priv(wiphy);
1461 if (dev == priv->mesh_dev)
1464 lbs_deb_enter_args(LBS_DEB_CFG80211, "reason_code %d", reason_code);
1466 /* store for lbs_cfg_ret_disconnect() */
1467 priv->disassoc_reason = reason_code;
1469 return lbs_disconnect(priv, reason_code);
1472 static int lbs_cfg_set_default_key(struct wiphy *wiphy,
1473 struct net_device *netdev,
1474 u8 key_index, bool unicast,
1477 struct lbs_private *priv = wiphy_priv(wiphy);
1479 if (netdev == priv->mesh_dev)
1482 lbs_deb_enter(LBS_DEB_CFG80211);
1484 if (key_index != priv->wep_tx_key) {
1485 lbs_deb_assoc("set_default_key: to %d\n", key_index);
1486 priv->wep_tx_key = key_index;
1487 lbs_set_wep_keys(priv);
1494 static int lbs_cfg_add_key(struct wiphy *wiphy, struct net_device *netdev,
1495 u8 idx, bool pairwise, const u8 *mac_addr,
1496 struct key_params *params)
1498 struct lbs_private *priv = wiphy_priv(wiphy);
1503 if (netdev == priv->mesh_dev)
1506 lbs_deb_enter(LBS_DEB_CFG80211);
1508 lbs_deb_assoc("add_key: cipher 0x%x, mac_addr %pM\n",
1509 params->cipher, mac_addr);
1510 lbs_deb_assoc("add_key: key index %d, key len %d\n",
1511 idx, params->key_len);
1512 if (params->key_len)
1513 lbs_deb_hex(LBS_DEB_CFG80211, "KEY",
1514 params->key, params->key_len);
1516 lbs_deb_assoc("add_key: seq len %d\n", params->seq_len);
1517 if (params->seq_len)
1518 lbs_deb_hex(LBS_DEB_CFG80211, "SEQ",
1519 params->seq, params->seq_len);
1521 switch (params->cipher) {
1522 case WLAN_CIPHER_SUITE_WEP40:
1523 case WLAN_CIPHER_SUITE_WEP104:
1524 /* actually compare if something has changed ... */
1525 if ((priv->wep_key_len[idx] != params->key_len) ||
1526 memcmp(priv->wep_key[idx],
1527 params->key, params->key_len) != 0) {
1528 priv->wep_key_len[idx] = params->key_len;
1529 memcpy(priv->wep_key[idx],
1530 params->key, params->key_len);
1531 lbs_set_wep_keys(priv);
1534 case WLAN_CIPHER_SUITE_TKIP:
1535 case WLAN_CIPHER_SUITE_CCMP:
1536 key_info = KEY_INFO_WPA_ENABLED | ((idx == 0)
1537 ? KEY_INFO_WPA_UNICAST
1538 : KEY_INFO_WPA_MCAST);
1539 key_type = (params->cipher == WLAN_CIPHER_SUITE_TKIP)
1542 lbs_set_key_material(priv,
1545 params->key, params->key_len);
1548 wiphy_err(wiphy, "unhandled cipher 0x%x\n", params->cipher);
1557 static int lbs_cfg_del_key(struct wiphy *wiphy, struct net_device *netdev,
1558 u8 key_index, bool pairwise, const u8 *mac_addr)
1561 lbs_deb_enter(LBS_DEB_CFG80211);
1563 lbs_deb_assoc("del_key: key_idx %d, mac_addr %pM\n",
1564 key_index, mac_addr);
1567 struct lbs_private *priv = wiphy_priv(wiphy);
1569 * I think can keep this a NO-OP, because:
1571 * - we clear all keys whenever we do lbs_cfg_connect() anyway
1572 * - neither "iw" nor "wpa_supplicant" won't call this during
1573 * an ongoing connection
1574 * - TODO: but I have to check if this is still true when
1575 * I set the AP to periodic re-keying
1576 * - we've not kzallec() something when we've added a key at
1577 * lbs_cfg_connect() or lbs_cfg_add_key().
1579 * This causes lbs_cfg_del_key() only called at disconnect time,
1580 * where we'd just waste time deleting a key that is not going
1581 * to be used anyway.
1583 if (key_index < 3 && priv->wep_key_len[key_index]) {
1584 priv->wep_key_len[key_index] = 0;
1585 lbs_set_wep_keys(priv);
1597 static int lbs_cfg_get_station(struct wiphy *wiphy, struct net_device *dev,
1598 u8 *mac, struct station_info *sinfo)
1600 struct lbs_private *priv = wiphy_priv(wiphy);
1605 lbs_deb_enter(LBS_DEB_CFG80211);
1607 sinfo->filled |= STATION_INFO_TX_BYTES |
1608 STATION_INFO_TX_PACKETS |
1609 STATION_INFO_RX_BYTES |
1610 STATION_INFO_RX_PACKETS;
1611 sinfo->tx_bytes = priv->dev->stats.tx_bytes;
1612 sinfo->tx_packets = priv->dev->stats.tx_packets;
1613 sinfo->rx_bytes = priv->dev->stats.rx_bytes;
1614 sinfo->rx_packets = priv->dev->stats.rx_packets;
1616 /* Get current RSSI */
1617 ret = lbs_get_rssi(priv, &signal, &noise);
1619 sinfo->signal = signal;
1620 sinfo->filled |= STATION_INFO_SIGNAL;
1623 /* Convert priv->cur_rate from hw_value to NL80211 value */
1624 for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) {
1625 if (priv->cur_rate == lbs_rates[i].hw_value) {
1626 sinfo->txrate.legacy = lbs_rates[i].bitrate;
1627 sinfo->filled |= STATION_INFO_TX_BITRATE;
1642 static int lbs_change_intf(struct wiphy *wiphy, struct net_device *dev,
1643 enum nl80211_iftype type, u32 *flags,
1644 struct vif_params *params)
1646 struct lbs_private *priv = wiphy_priv(wiphy);
1649 if (dev == priv->mesh_dev)
1653 case NL80211_IFTYPE_MONITOR:
1654 case NL80211_IFTYPE_STATION:
1655 case NL80211_IFTYPE_ADHOC:
1661 lbs_deb_enter(LBS_DEB_CFG80211);
1663 if (priv->iface_running)
1664 ret = lbs_set_iface_type(priv, type);
1667 priv->wdev->iftype = type;
1669 lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
1680 * The firmware needs the following bits masked out of the beacon-derived
1681 * capability field when associating/joining to a BSS:
1682 * 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused)
1684 #define CAPINFO_MASK (~(0xda00))
1687 static void lbs_join_post(struct lbs_private *priv,
1688 struct cfg80211_ibss_params *params,
1689 u8 *bssid, u16 capability)
1691 u8 fake_ie[2 + IEEE80211_MAX_SSID_LEN + /* ssid */
1692 2 + 4 + /* basic rates */
1693 2 + 1 + /* DS parameter */
1695 2 + 8]; /* extended rates */
1697 struct cfg80211_bss *bss;
1699 lbs_deb_enter(LBS_DEB_CFG80211);
1702 * For cfg80211_inform_bss, we'll need a fake IE, as we can't get
1703 * the real IE from the firmware. So we fabricate a fake IE based on
1704 * what the firmware actually sends (sniffed with wireshark).
1707 *fake++ = WLAN_EID_SSID;
1708 *fake++ = params->ssid_len;
1709 memcpy(fake, params->ssid, params->ssid_len);
1710 fake += params->ssid_len;
1711 /* Fake supported basic rates IE */
1712 *fake++ = WLAN_EID_SUPP_RATES;
1718 /* Fake DS channel IE */
1719 *fake++ = WLAN_EID_DS_PARAMS;
1721 *fake++ = params->channel->hw_value;
1722 /* Fake IBSS params IE */
1723 *fake++ = WLAN_EID_IBSS_PARAMS;
1725 *fake++ = 0; /* ATIM=0 */
1727 /* Fake extended rates IE, TODO: don't add this for 802.11b only,
1728 * but I don't know how this could be checked */
1729 *fake++ = WLAN_EID_EXT_SUPP_RATES;
1739 lbs_deb_hex(LBS_DEB_CFG80211, "IE", fake_ie, fake - fake_ie);
1741 bss = cfg80211_inform_bss(priv->wdev->wiphy,
1746 params->beacon_interval,
1747 fake_ie, fake - fake_ie,
1749 cfg80211_put_bss(bss);
1751 memcpy(priv->wdev->ssid, params->ssid, params->ssid_len);
1752 priv->wdev->ssid_len = params->ssid_len;
1754 cfg80211_ibss_joined(priv->dev, bssid, GFP_KERNEL);
1756 /* TODO: consider doing this at MACREG_INT_CODE_LINK_SENSED time */
1757 priv->connect_status = LBS_CONNECTED;
1758 netif_carrier_on(priv->dev);
1759 if (!priv->tx_pending_len)
1760 netif_wake_queue(priv->dev);
1762 lbs_deb_leave(LBS_DEB_CFG80211);
1765 static int lbs_ibss_join_existing(struct lbs_private *priv,
1766 struct cfg80211_ibss_params *params,
1767 struct cfg80211_bss *bss)
1769 const u8 *rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES);
1770 struct cmd_ds_802_11_ad_hoc_join cmd;
1771 u8 preamble = RADIO_PREAMBLE_SHORT;
1774 lbs_deb_enter(LBS_DEB_CFG80211);
1776 /* TODO: set preamble based on scan result */
1777 ret = lbs_set_radio(priv, preamble, 1);
1782 * Example CMD_802_11_AD_HOC_JOIN command:
1784 * command 2c 00 CMD_802_11_AD_HOC_JOIN
1788 * bssid 02 27 27 97 2f 96
1789 * ssid 49 42 53 53 00 00 00 00
1790 * 00 00 00 00 00 00 00 00
1791 * 00 00 00 00 00 00 00 00
1792 * 00 00 00 00 00 00 00 00
1793 * type 02 CMD_BSS_TYPE_IBSS
1794 * beacon period 64 00
1796 * timestamp 00 00 00 00 00 00 00 00
1797 * localtime 00 00 00 00 00 00 00 00
1801 * reserveed 00 00 00 00
1804 * IE IBSS atim 00 00
1805 * reserved 00 00 00 00
1807 * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c 00
1808 * fail timeout ff 00
1811 memset(&cmd, 0, sizeof(cmd));
1812 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1814 memcpy(cmd.bss.bssid, bss->bssid, ETH_ALEN);
1815 memcpy(cmd.bss.ssid, params->ssid, params->ssid_len);
1816 cmd.bss.type = CMD_BSS_TYPE_IBSS;
1817 cmd.bss.beaconperiod = cpu_to_le16(params->beacon_interval);
1818 cmd.bss.ds.header.id = WLAN_EID_DS_PARAMS;
1819 cmd.bss.ds.header.len = 1;
1820 cmd.bss.ds.channel = params->channel->hw_value;
1821 cmd.bss.ibss.header.id = WLAN_EID_IBSS_PARAMS;
1822 cmd.bss.ibss.header.len = 2;
1823 cmd.bss.ibss.atimwindow = 0;
1824 cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK);
1826 /* set rates to the intersection of our rates and the rates in the
1829 lbs_add_rates(cmd.bss.rates);
1832 u8 rates_max = rates_eid[1];
1833 u8 *rates = cmd.bss.rates;
1834 for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) {
1835 u8 hw_rate = lbs_rates[hw].bitrate / 5;
1836 for (i = 0; i < rates_max; i++) {
1837 if (hw_rate == (rates_eid[i+2] & 0x7f)) {
1838 u8 rate = rates_eid[i+2];
1839 if (rate == 0x02 || rate == 0x04 ||
1840 rate == 0x0b || rate == 0x16)
1848 /* Only v8 and below support setting this */
1849 if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) {
1850 cmd.failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT);
1851 cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME);
1853 ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd);
1858 * This is a sample response to CMD_802_11_AD_HOC_JOIN:
1866 lbs_join_post(priv, params, bss->bssid, bss->capability);
1869 lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
1875 static int lbs_ibss_start_new(struct lbs_private *priv,
1876 struct cfg80211_ibss_params *params)
1878 struct cmd_ds_802_11_ad_hoc_start cmd;
1879 struct cmd_ds_802_11_ad_hoc_result *resp =
1880 (struct cmd_ds_802_11_ad_hoc_result *) &cmd;
1881 u8 preamble = RADIO_PREAMBLE_SHORT;
1885 lbs_deb_enter(LBS_DEB_CFG80211);
1887 ret = lbs_set_radio(priv, preamble, 1);
1892 * Example CMD_802_11_AD_HOC_START command:
1894 * command 2b 00 CMD_802_11_AD_HOC_START
1898 * ssid 54 45 53 54 00 00 00 00
1899 * 00 00 00 00 00 00 00 00
1900 * 00 00 00 00 00 00 00 00
1901 * 00 00 00 00 00 00 00 00
1903 * beacon period 64 00
1907 * IE IBSS atim 00 00
1908 * reserved 00 00 00 00
1912 * reserved 00 00 00 00
1915 * rates 82 84 8b 96 (basic rates with have bit 7 set)
1916 * 0c 12 18 24 30 48 60 6c
1919 memset(&cmd, 0, sizeof(cmd));
1920 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1921 memcpy(cmd.ssid, params->ssid, params->ssid_len);
1922 cmd.bsstype = CMD_BSS_TYPE_IBSS;
1923 cmd.beaconperiod = cpu_to_le16(params->beacon_interval);
1924 cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS;
1925 cmd.ibss.header.len = 2;
1926 cmd.ibss.atimwindow = 0;
1927 cmd.ds.header.id = WLAN_EID_DS_PARAMS;
1928 cmd.ds.header.len = 1;
1929 cmd.ds.channel = params->channel->hw_value;
1930 /* Only v8 and below support setting probe delay */
1931 if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8)
1932 cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME);
1933 /* TODO: mix in WLAN_CAPABILITY_PRIVACY */
1934 capability = WLAN_CAPABILITY_IBSS;
1935 cmd.capability = cpu_to_le16(capability);
1936 lbs_add_rates(cmd.rates);
1939 ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd);
1944 * This is a sample response to CMD_802_11_AD_HOC_JOIN:
1951 * bssid 02 2b 7b 0f 86 0e
1953 lbs_join_post(priv, params, resp->bssid, capability);
1956 lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
1961 static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev,
1962 struct cfg80211_ibss_params *params)
1964 struct lbs_private *priv = wiphy_priv(wiphy);
1966 struct cfg80211_bss *bss;
1967 DECLARE_SSID_BUF(ssid_buf);
1969 if (dev == priv->mesh_dev)
1972 lbs_deb_enter(LBS_DEB_CFG80211);
1974 if (!params->channel) {
1979 ret = lbs_set_channel(priv, params->channel->hw_value);
1983 /* Search if someone is beaconing. This assumes that the
1984 * bss list is populated already */
1985 bss = cfg80211_get_bss(wiphy, params->channel, params->bssid,
1986 params->ssid, params->ssid_len,
1987 WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
1990 ret = lbs_ibss_join_existing(priv, params, bss);
1991 cfg80211_put_bss(bss);
1993 ret = lbs_ibss_start_new(priv, params);
1997 lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
2002 static int lbs_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
2004 struct lbs_private *priv = wiphy_priv(wiphy);
2005 struct cmd_ds_802_11_ad_hoc_stop cmd;
2008 if (dev == priv->mesh_dev)
2011 lbs_deb_enter(LBS_DEB_CFG80211);
2013 memset(&cmd, 0, sizeof(cmd));
2014 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
2015 ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_STOP, &cmd);
2017 /* TODO: consider doing this at MACREG_INT_CODE_ADHOC_BCN_LOST time */
2018 lbs_mac_event_disconnected(priv);
2020 lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
2031 static struct cfg80211_ops lbs_cfg80211_ops = {
2032 .set_channel = lbs_cfg_set_channel,
2033 .scan = lbs_cfg_scan,
2034 .connect = lbs_cfg_connect,
2035 .disconnect = lbs_cfg_disconnect,
2036 .add_key = lbs_cfg_add_key,
2037 .del_key = lbs_cfg_del_key,
2038 .set_default_key = lbs_cfg_set_default_key,
2039 .get_station = lbs_cfg_get_station,
2040 .change_virtual_intf = lbs_change_intf,
2041 .join_ibss = lbs_join_ibss,
2042 .leave_ibss = lbs_leave_ibss,
2047 * At this time lbs_private *priv doesn't even exist, so we just allocate
2048 * memory and don't initialize the wiphy further. This is postponed until we
2049 * can talk to the firmware and happens at registration time in
2050 * lbs_cfg_wiphy_register().
2052 struct wireless_dev *lbs_cfg_alloc(struct device *dev)
2055 struct wireless_dev *wdev;
2057 lbs_deb_enter(LBS_DEB_CFG80211);
2059 wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
2061 dev_err(dev, "cannot allocate wireless device\n");
2062 return ERR_PTR(-ENOMEM);
2065 wdev->wiphy = wiphy_new(&lbs_cfg80211_ops, sizeof(struct lbs_private));
2067 dev_err(dev, "cannot allocate wiphy\n");
2072 lbs_deb_leave(LBS_DEB_CFG80211);
2077 lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
2078 return ERR_PTR(ret);
2082 static void lbs_cfg_set_regulatory_hint(struct lbs_private *priv)
2084 struct region_code_mapping {
2089 /* Section 5.17.2 */
2090 static const struct region_code_mapping regmap[] = {
2091 {"US ", 0x10}, /* US FCC */
2092 {"CA ", 0x20}, /* Canada */
2093 {"EU ", 0x30}, /* ETSI */
2094 {"ES ", 0x31}, /* Spain */
2095 {"FR ", 0x32}, /* France */
2096 {"JP ", 0x40}, /* Japan */
2100 lbs_deb_enter(LBS_DEB_CFG80211);
2102 for (i = 0; i < ARRAY_SIZE(regmap); i++)
2103 if (regmap[i].code == priv->regioncode) {
2104 regulatory_hint(priv->wdev->wiphy, regmap[i].cn);
2108 lbs_deb_leave(LBS_DEB_CFG80211);
2113 * This function get's called after lbs_setup_firmware() determined the
2114 * firmware capabities. So we can setup the wiphy according to our
2115 * hardware/firmware.
2117 int lbs_cfg_register(struct lbs_private *priv)
2119 struct wireless_dev *wdev = priv->wdev;
2122 lbs_deb_enter(LBS_DEB_CFG80211);
2124 wdev->wiphy->max_scan_ssids = 1;
2125 wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
2127 wdev->wiphy->interface_modes =
2128 BIT(NL80211_IFTYPE_STATION) |
2129 BIT(NL80211_IFTYPE_ADHOC);
2130 if (lbs_rtap_supported(priv))
2131 wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
2132 if (lbs_mesh_activated(priv))
2133 wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MESH_POINT);
2135 wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &lbs_band_2ghz;
2138 * We could check priv->fwcapinfo && FW_CAPINFO_WPA, but I have
2139 * never seen a firmware without WPA
2141 wdev->wiphy->cipher_suites = cipher_suites;
2142 wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
2143 wdev->wiphy->reg_notifier = lbs_reg_notifier;
2145 ret = wiphy_register(wdev->wiphy);
2147 pr_err("cannot register wiphy device\n");
2149 priv->wiphy_registered = true;
2151 ret = register_netdev(priv->dev);
2153 pr_err("cannot register network device\n");
2155 INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker);
2157 lbs_cfg_set_regulatory_hint(priv);
2159 lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
2163 int lbs_reg_notifier(struct wiphy *wiphy,
2164 struct regulatory_request *request)
2166 struct lbs_private *priv = wiphy_priv(wiphy);
2169 lbs_deb_enter_args(LBS_DEB_CFG80211, "cfg80211 regulatory domain "
2170 "callback for domain %c%c\n", request->alpha2[0],
2171 request->alpha2[1]);
2173 ret = lbs_set_11d_domain_info(priv, request, wiphy->bands);
2175 lbs_deb_leave(LBS_DEB_CFG80211);
2179 void lbs_scan_deinit(struct lbs_private *priv)
2181 lbs_deb_enter(LBS_DEB_CFG80211);
2182 cancel_delayed_work_sync(&priv->scan_work);
2186 void lbs_cfg_free(struct lbs_private *priv)
2188 struct wireless_dev *wdev = priv->wdev;
2190 lbs_deb_enter(LBS_DEB_CFG80211);
2195 if (priv->wiphy_registered)
2196 wiphy_unregister(wdev->wiphy);
2199 wiphy_free(wdev->wiphy);