2 Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
3 Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
4 Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
5 Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
6 Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
7 Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org>
8 <http://rt2x00.serialmonkey.com>
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the
22 Free Software Foundation, Inc.,
23 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
28 Abstract: rt2800usb device specific routines.
29 Supported chipsets: RT2800U.
32 #include <linux/delay.h>
33 #include <linux/etherdevice.h>
34 #include <linux/init.h>
35 #include <linux/kernel.h>
36 #include <linux/module.h>
37 #include <linux/usb.h>
40 #include "rt2x00usb.h"
41 #include "rt2800lib.h"
43 #include "rt2800usb.h"
46 * Allow hardware encryption to be disabled.
48 static int modparam_nohwcrypt;
49 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
50 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
55 static void rt2800usb_start_queue(struct data_queue *queue)
57 struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
62 rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
63 rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1);
64 rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
67 rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®);
68 rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
69 rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
70 rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
71 rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
78 static void rt2800usb_stop_queue(struct data_queue *queue)
80 struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
85 rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
86 rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0);
87 rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
90 rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®);
91 rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
92 rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
93 rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
94 rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
102 * test if there is an entry in any TX queue for which DMA is done
103 * but the TX status has not been returned yet
105 static bool rt2800usb_txstatus_pending(struct rt2x00_dev *rt2x00dev)
107 struct data_queue *queue;
109 tx_queue_for_each(rt2x00dev, queue) {
110 if (rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE) !=
111 rt2x00queue_get_entry(queue, Q_INDEX_DONE))
117 static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
118 int urb_status, u32 tx_status)
121 WARNING(rt2x00dev, "rt2x00usb_register_read_async failed: %d\n", urb_status);
125 /* try to read all TX_STA_FIFO entries before scheduling txdone_work */
126 if (rt2x00_get_field32(tx_status, TX_STA_FIFO_VALID)) {
127 if (!kfifo_put(&rt2x00dev->txstatus_fifo, &tx_status)) {
128 WARNING(rt2x00dev, "TX status FIFO overrun, "
129 "drop tx status report.\n");
130 queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
133 } else if (!kfifo_is_empty(&rt2x00dev->txstatus_fifo)) {
134 queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
135 } else if (rt2800usb_txstatus_pending(rt2x00dev)) {
136 mod_timer(&rt2x00dev->txstatus_timer, jiffies + msecs_to_jiffies(2));
142 static void rt2800usb_tx_dma_done(struct queue_entry *entry)
144 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
146 rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
147 rt2800usb_tx_sta_fifo_read_completed);
150 static void rt2800usb_tx_sta_fifo_timeout(unsigned long data)
152 struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
154 rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
155 rt2800usb_tx_sta_fifo_read_completed);
161 static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
163 return FIRMWARE_RT2870;
166 static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
167 const u8 *data, const size_t len)
174 * Check which section of the firmware we need.
176 if (rt2x00_rt(rt2x00dev, RT2860) ||
177 rt2x00_rt(rt2x00dev, RT2872) ||
178 rt2x00_rt(rt2x00dev, RT3070)) {
187 * Write firmware to device.
189 rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
190 data + offset, length);
192 rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
193 rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
196 * Send firmware request to device to load firmware,
197 * we need to specify a long timeout time.
199 status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
200 0, USB_MODE_FIRMWARE,
201 REGISTER_TIMEOUT_FIRMWARE);
203 ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
208 rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
214 * Device state switch handlers.
216 static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
221 * Wait until BBP and RF are ready.
223 if (rt2800_wait_csr_ready(rt2x00dev))
226 rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
227 rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
229 rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
231 rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
232 rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
233 rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1);
234 rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
236 rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
238 rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
239 USB_MODE_RESET, REGISTER_TIMEOUT);
241 rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
246 static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
250 if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev)))
253 rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, ®);
254 rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0);
255 rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
256 rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
258 * Total room for RX frames in kilobytes, PBF might still exceed
259 * this limit so reduce the number to prevent errors.
261 rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_LIMIT,
262 ((rt2x00dev->ops->rx->entry_num * DATA_FRAME_SIZE)
264 rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_EN, 1);
265 rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1);
266 rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
268 return rt2800_enable_radio(rt2x00dev);
271 static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
273 rt2800_disable_radio(rt2x00dev);
274 rt2x00usb_disable_radio(rt2x00dev);
277 static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
278 enum dev_state state)
280 if (state == STATE_AWAKE)
281 rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 2);
283 rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0xff, 2);
288 static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
289 enum dev_state state)
296 * Before the radio can be enabled, the device first has
297 * to be woken up. After that it needs a bit of time
298 * to be fully awake and then the radio can be enabled.
300 rt2800usb_set_state(rt2x00dev, STATE_AWAKE);
302 retval = rt2800usb_enable_radio(rt2x00dev);
304 case STATE_RADIO_OFF:
306 * After the radio has been disabled, the device should
307 * be put to sleep for powersaving.
309 rt2800usb_disable_radio(rt2x00dev);
310 rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
312 case STATE_RADIO_IRQ_ON:
313 case STATE_RADIO_IRQ_OFF:
314 /* No support, but no error either */
316 case STATE_DEEP_SLEEP:
320 retval = rt2800usb_set_state(rt2x00dev, state);
327 if (unlikely(retval))
328 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
337 static void rt2800usb_watchdog(struct rt2x00_dev *rt2x00dev)
342 rt2x00usb_register_read(rt2x00dev, TXRXQ_PCNT, ®);
343 if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q)) {
344 WARNING(rt2x00dev, "TX HW queue 0 timed out,"
345 " invoke forced kick\n");
347 rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40012);
349 for (i = 0; i < 10; i++) {
351 if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q))
355 rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
358 rt2x00usb_register_read(rt2x00dev, TXRXQ_PCNT, ®);
359 if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q)) {
360 WARNING(rt2x00dev, "TX HW queue 1 timed out,"
361 " invoke forced kick\n");
363 rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf4000a);
365 for (i = 0; i < 10; i++) {
367 if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q))
371 rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
374 rt2x00usb_watchdog(rt2x00dev);
378 * TX descriptor initialization
380 static __le32 *rt2800usb_get_txwi(struct queue_entry *entry)
382 if (entry->queue->qid == QID_BEACON)
383 return (__le32 *) (entry->skb->data);
385 return (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE);
388 static void rt2800usb_write_tx_desc(struct queue_entry *entry,
389 struct txentry_desc *txdesc)
391 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
392 __le32 *txi = (__le32 *) entry->skb->data;
396 * Initialize TXINFO descriptor
398 rt2x00_desc_read(txi, 0, &word);
401 * The size of TXINFO_W0_USB_DMA_TX_PKT_LEN is
402 * TXWI + 802.11 header + L2 pad + payload + pad,
403 * so need to decrease size of TXINFO and USB end pad.
405 rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
406 entry->skb->len - TXINFO_DESC_SIZE - 4);
407 rt2x00_set_field32(&word, TXINFO_W0_WIV,
408 !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
409 rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
410 rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0);
411 rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0);
412 rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
413 test_bit(ENTRY_TXD_BURST, &txdesc->flags));
414 rt2x00_desc_write(txi, 0, word);
417 * Register descriptor details in skb frame descriptor.
419 skbdesc->flags |= SKBDESC_DESC_IN_SKB;
421 skbdesc->desc_len = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
424 static void rt2800usb_write_tx_data(struct queue_entry *entry,
425 struct txentry_desc *txdesc)
430 rt2800_write_tx_data(entry, txdesc);
433 * pad(1~3 bytes) is added after each 802.11 payload.
434 * USB end pad(4 bytes) is added at each USB bulk out packet end.
435 * TX frame format is :
436 * | TXINFO | TXWI | 802.11 header | L2 pad | payload | pad | USB end pad |
437 * |<------------- tx_pkt_len ------------->|
439 len = roundup(entry->skb->len, 4) + 4;
440 err = skb_padto(entry->skb, len);
442 WARNING(entry->queue->rt2x00dev, "TX SKB padding error, out of memory\n");
446 entry->skb->len = len;
450 * TX data initialization
452 static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
454 return entry->skb->len;
458 * TX control handlers
460 static void rt2800usb_work_txdone(struct work_struct *work)
462 struct rt2x00_dev *rt2x00dev =
463 container_of(work, struct rt2x00_dev, txdone_work);
464 struct data_queue *queue;
465 struct queue_entry *entry;
467 rt2800_txdone(rt2x00dev);
470 * Process any trailing TX status reports for IO failures,
471 * we loop until we find the first non-IO error entry. This
472 * can either be a frame which is free, is being uploaded,
473 * or has completed the upload but didn't have an entry
474 * in the TX_STAT_FIFO register yet.
476 tx_queue_for_each(rt2x00dev, queue) {
477 while (!rt2x00queue_empty(queue)) {
478 entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
480 if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
481 !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
484 if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
485 rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
486 else if (rt2x00queue_status_timeout(entry))
487 rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
494 * The hw may delay sending the packet after DMA complete
495 * if the medium is busy, thus the TX_STA_FIFO entry is
496 * also delayed -> use a timer to retrieve it.
498 if (rt2800usb_txstatus_pending(rt2x00dev))
499 mod_timer(&rt2x00dev->txstatus_timer, jiffies + msecs_to_jiffies(2));
503 * RX control handlers
505 static void rt2800usb_fill_rxdone(struct queue_entry *entry,
506 struct rxdone_entry_desc *rxdesc)
508 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
509 __le32 *rxi = (__le32 *)entry->skb->data;
515 * Copy descriptor to the skbdesc->desc buffer, making it safe from
516 * moving of frame data in rt2x00usb.
518 memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
521 * RX frame format is :
522 * | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad |
523 * |<------------ rx_pkt_len -------------->|
525 rt2x00_desc_read(rxi, 0, &word);
526 rx_pkt_len = rt2x00_get_field32(word, RXINFO_W0_USB_DMA_RX_PKT_LEN);
529 * Remove the RXINFO structure from the sbk.
531 skb_pull(entry->skb, RXINFO_DESC_SIZE);
534 * FIXME: we need to check for rx_pkt_len validity
536 rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
539 * It is now safe to read the descriptor on all architectures.
541 rt2x00_desc_read(rxd, 0, &word);
543 if (rt2x00_get_field32(word, RXD_W0_CRC_ERROR))
544 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
546 rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W0_CIPHER_ERROR);
548 if (rt2x00_get_field32(word, RXD_W0_DECRYPTED)) {
550 * Hardware has stripped IV/EIV data from 802.11 frame during
551 * decryption. Unfortunately the descriptor doesn't contain
552 * any fields with the EIV/IV data either, so they can't
553 * be restored by rt2x00lib.
555 rxdesc->flags |= RX_FLAG_IV_STRIPPED;
558 * The hardware has already checked the Michael Mic and has
559 * stripped it from the frame. Signal this to mac80211.
561 rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
563 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
564 rxdesc->flags |= RX_FLAG_DECRYPTED;
565 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
566 rxdesc->flags |= RX_FLAG_MMIC_ERROR;
569 if (rt2x00_get_field32(word, RXD_W0_MY_BSS))
570 rxdesc->dev_flags |= RXDONE_MY_BSS;
572 if (rt2x00_get_field32(word, RXD_W0_L2PAD))
573 rxdesc->dev_flags |= RXDONE_L2PAD;
576 * Remove RXD descriptor from end of buffer.
578 skb_trim(entry->skb, rx_pkt_len);
581 * Process the RXWI structure.
583 rt2800_process_rxwi(entry, rxdesc);
587 * Device probe functions.
589 static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
591 if (rt2800_efuse_detect(rt2x00dev))
592 rt2800_read_eeprom_efuse(rt2x00dev);
594 rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
597 return rt2800_validate_eeprom(rt2x00dev);
600 static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
605 * Allocate eeprom data.
607 retval = rt2800usb_validate_eeprom(rt2x00dev);
611 retval = rt2800_init_eeprom(rt2x00dev);
616 * Initialize hw specifications.
618 retval = rt2800_probe_hw_mode(rt2x00dev);
623 * This device has multiple filters for control frames
624 * and has a separate filter for PS Poll frames.
626 __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
627 __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
630 * This device requires firmware.
632 __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
633 __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
634 if (!modparam_nohwcrypt)
635 __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
636 __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
637 __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
638 __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
639 __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
641 setup_timer(&rt2x00dev->txstatus_timer,
642 rt2800usb_tx_sta_fifo_timeout,
643 (unsigned long) rt2x00dev);
646 * Set the rssi offset.
648 rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
651 * Overwrite TX done handler
653 PREPARE_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone);
658 static const struct ieee80211_ops rt2800usb_mac80211_ops = {
660 .start = rt2x00mac_start,
661 .stop = rt2x00mac_stop,
662 .add_interface = rt2x00mac_add_interface,
663 .remove_interface = rt2x00mac_remove_interface,
664 .config = rt2x00mac_config,
665 .configure_filter = rt2x00mac_configure_filter,
666 .set_tim = rt2x00mac_set_tim,
667 .set_key = rt2x00mac_set_key,
668 .sw_scan_start = rt2x00mac_sw_scan_start,
669 .sw_scan_complete = rt2x00mac_sw_scan_complete,
670 .get_stats = rt2x00mac_get_stats,
671 .get_tkip_seq = rt2800_get_tkip_seq,
672 .set_rts_threshold = rt2800_set_rts_threshold,
673 .bss_info_changed = rt2x00mac_bss_info_changed,
674 .conf_tx = rt2800_conf_tx,
675 .get_tsf = rt2800_get_tsf,
676 .rfkill_poll = rt2x00mac_rfkill_poll,
677 .ampdu_action = rt2800_ampdu_action,
678 .flush = rt2x00mac_flush,
679 .get_survey = rt2800_get_survey,
680 .get_ringparam = rt2x00mac_get_ringparam,
683 static const struct rt2800_ops rt2800usb_rt2800_ops = {
684 .register_read = rt2x00usb_register_read,
685 .register_read_lock = rt2x00usb_register_read_lock,
686 .register_write = rt2x00usb_register_write,
687 .register_write_lock = rt2x00usb_register_write_lock,
688 .register_multiread = rt2x00usb_register_multiread,
689 .register_multiwrite = rt2x00usb_register_multiwrite,
690 .regbusy_read = rt2x00usb_regbusy_read,
691 .drv_write_firmware = rt2800usb_write_firmware,
692 .drv_init_registers = rt2800usb_init_registers,
693 .drv_get_txwi = rt2800usb_get_txwi,
696 static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
697 .probe_hw = rt2800usb_probe_hw,
698 .get_firmware_name = rt2800usb_get_firmware_name,
699 .check_firmware = rt2800_check_firmware,
700 .load_firmware = rt2800_load_firmware,
701 .initialize = rt2x00usb_initialize,
702 .uninitialize = rt2x00usb_uninitialize,
703 .clear_entry = rt2x00usb_clear_entry,
704 .set_device_state = rt2800usb_set_device_state,
705 .rfkill_poll = rt2800_rfkill_poll,
706 .link_stats = rt2800_link_stats,
707 .reset_tuner = rt2800_reset_tuner,
708 .link_tuner = rt2800_link_tuner,
709 .gain_calibration = rt2800_gain_calibration,
710 .watchdog = rt2800usb_watchdog,
711 .start_queue = rt2800usb_start_queue,
712 .kick_queue = rt2x00usb_kick_queue,
713 .stop_queue = rt2800usb_stop_queue,
714 .flush_queue = rt2x00usb_flush_queue,
715 .tx_dma_done = rt2800usb_tx_dma_done,
716 .write_tx_desc = rt2800usb_write_tx_desc,
717 .write_tx_data = rt2800usb_write_tx_data,
718 .write_beacon = rt2800_write_beacon,
719 .clear_beacon = rt2800_clear_beacon,
720 .get_tx_data_len = rt2800usb_get_tx_data_len,
721 .fill_rxdone = rt2800usb_fill_rxdone,
722 .config_shared_key = rt2800_config_shared_key,
723 .config_pairwise_key = rt2800_config_pairwise_key,
724 .config_filter = rt2800_config_filter,
725 .config_intf = rt2800_config_intf,
726 .config_erp = rt2800_config_erp,
727 .config_ant = rt2800_config_ant,
728 .config = rt2800_config,
731 static const struct data_queue_desc rt2800usb_queue_rx = {
733 .data_size = AGGREGATION_SIZE,
734 .desc_size = RXINFO_DESC_SIZE + RXWI_DESC_SIZE,
735 .priv_size = sizeof(struct queue_entry_priv_usb),
738 static const struct data_queue_desc rt2800usb_queue_tx = {
740 .data_size = AGGREGATION_SIZE,
741 .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
742 .priv_size = sizeof(struct queue_entry_priv_usb),
745 static const struct data_queue_desc rt2800usb_queue_bcn = {
747 .data_size = MGMT_FRAME_SIZE,
748 .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
749 .priv_size = sizeof(struct queue_entry_priv_usb),
752 static const struct rt2x00_ops rt2800usb_ops = {
753 .name = KBUILD_MODNAME,
756 .eeprom_size = EEPROM_SIZE,
758 .tx_queues = NUM_TX_QUEUES,
759 .extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
760 .rx = &rt2800usb_queue_rx,
761 .tx = &rt2800usb_queue_tx,
762 .bcn = &rt2800usb_queue_bcn,
763 .lib = &rt2800usb_rt2x00_ops,
764 .drv = &rt2800usb_rt2800_ops,
765 .hw = &rt2800usb_mac80211_ops,
766 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
767 .debugfs = &rt2800_rt2x00debug,
768 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
772 * rt2800usb module information.
774 static struct usb_device_id rt2800usb_device_table[] = {
776 { USB_DEVICE(0x07b8, 0x2870) },
777 { USB_DEVICE(0x07b8, 0x2770) },
778 { USB_DEVICE(0x07b8, 0x3070) },
779 { USB_DEVICE(0x07b8, 0x3071) },
780 { USB_DEVICE(0x07b8, 0x3072) },
781 { USB_DEVICE(0x1482, 0x3c09) },
783 { USB_DEVICE(0x1eda, 0x2012) },
784 { USB_DEVICE(0x1eda, 0x2310) },
786 { USB_DEVICE(0x8516, 0x2070) },
787 { USB_DEVICE(0x8516, 0x2770) },
788 { USB_DEVICE(0x8516, 0x2870) },
789 { USB_DEVICE(0x8516, 0x3070) },
790 { USB_DEVICE(0x8516, 0x3071) },
791 { USB_DEVICE(0x8516, 0x3072) },
793 { USB_DEVICE(0x14b2, 0x3c06) },
794 { USB_DEVICE(0x14b2, 0x3c07) },
795 { USB_DEVICE(0x14b2, 0x3c09) },
796 { USB_DEVICE(0x14b2, 0x3c12) },
797 { USB_DEVICE(0x14b2, 0x3c23) },
798 { USB_DEVICE(0x14b2, 0x3c25) },
799 { USB_DEVICE(0x14b2, 0x3c27) },
800 { USB_DEVICE(0x14b2, 0x3c28) },
801 { USB_DEVICE(0x14b2, 0x3c2c) },
803 { USB_DEVICE(0x15c5, 0x0008) },
805 { USB_DEVICE(0x1690, 0x0740) },
807 { USB_DEVICE(0x0b05, 0x1731) },
808 { USB_DEVICE(0x0b05, 0x1732) },
809 { USB_DEVICE(0x0b05, 0x1742) },
810 { USB_DEVICE(0x0b05, 0x1784) },
811 { USB_DEVICE(0x1761, 0x0b05) },
813 { USB_DEVICE(0x13d3, 0x3247) },
814 { USB_DEVICE(0x13d3, 0x3273) },
815 { USB_DEVICE(0x13d3, 0x3305) },
816 { USB_DEVICE(0x13d3, 0x3307) },
817 { USB_DEVICE(0x13d3, 0x3321) },
819 { USB_DEVICE(0x050d, 0x8053) },
820 { USB_DEVICE(0x050d, 0x805c) },
821 { USB_DEVICE(0x050d, 0x815c) },
822 { USB_DEVICE(0x050d, 0x825a) },
823 { USB_DEVICE(0x050d, 0x825b) },
824 { USB_DEVICE(0x050d, 0x935a) },
825 { USB_DEVICE(0x050d, 0x935b) },
827 { USB_DEVICE(0x0411, 0x00e8) },
828 { USB_DEVICE(0x0411, 0x0158) },
829 { USB_DEVICE(0x0411, 0x015d) },
830 { USB_DEVICE(0x0411, 0x016f) },
831 { USB_DEVICE(0x0411, 0x01a2) },
833 { USB_DEVICE(0x07aa, 0x002f) },
834 { USB_DEVICE(0x07aa, 0x003c) },
835 { USB_DEVICE(0x07aa, 0x003f) },
836 { USB_DEVICE(0x18c5, 0x0012) },
838 { USB_DEVICE(0x07d1, 0x3c09) },
839 { USB_DEVICE(0x07d1, 0x3c0a) },
840 { USB_DEVICE(0x07d1, 0x3c0d) },
841 { USB_DEVICE(0x07d1, 0x3c0e) },
842 { USB_DEVICE(0x07d1, 0x3c0f) },
843 { USB_DEVICE(0x07d1, 0x3c11) },
844 { USB_DEVICE(0x07d1, 0x3c13) },
845 { USB_DEVICE(0x07d1, 0x3c15) },
846 { USB_DEVICE(0x07d1, 0x3c16) },
847 { USB_DEVICE(0x2001, 0x3c1b) },
849 { USB_DEVICE(0x07fa, 0x7712) },
851 { USB_DEVICE(0x7392, 0x7711) },
852 { USB_DEVICE(0x7392, 0x7717) },
853 { USB_DEVICE(0x7392, 0x7718) },
854 { USB_DEVICE(0x7392, 0x7722) },
856 { USB_DEVICE(0x203d, 0x1480) },
857 { USB_DEVICE(0x203d, 0x14a9) },
859 { USB_DEVICE(0x1740, 0x9701) },
860 { USB_DEVICE(0x1740, 0x9702) },
861 { USB_DEVICE(0x1740, 0x9703) },
862 { USB_DEVICE(0x1740, 0x9705) },
863 { USB_DEVICE(0x1740, 0x9706) },
864 { USB_DEVICE(0x1740, 0x9707) },
865 { USB_DEVICE(0x1740, 0x9708) },
866 { USB_DEVICE(0x1740, 0x9709) },
868 { USB_DEVICE(0x15a9, 0x0012) },
870 { USB_DEVICE(0x1044, 0x800b) },
871 { USB_DEVICE(0x1044, 0x800d) },
873 { USB_DEVICE(0x0e66, 0x0001) },
874 { USB_DEVICE(0x0e66, 0x0003) },
875 { USB_DEVICE(0x0e66, 0x0009) },
876 { USB_DEVICE(0x0e66, 0x000b) },
877 { USB_DEVICE(0x0e66, 0x0013) },
878 { USB_DEVICE(0x0e66, 0x0017) },
879 { USB_DEVICE(0x0e66, 0x0018) },
881 { USB_DEVICE(0x04bb, 0x0945) },
882 { USB_DEVICE(0x04bb, 0x0947) },
883 { USB_DEVICE(0x04bb, 0x0948) },
885 { USB_DEVICE(0x13b1, 0x0031) },
886 { USB_DEVICE(0x1737, 0x0070) },
887 { USB_DEVICE(0x1737, 0x0071) },
888 { USB_DEVICE(0x1737, 0x0077) },
889 { USB_DEVICE(0x1737, 0x0078) },
891 { USB_DEVICE(0x0789, 0x0162) },
892 { USB_DEVICE(0x0789, 0x0163) },
893 { USB_DEVICE(0x0789, 0x0164) },
894 { USB_DEVICE(0x0789, 0x0166) },
896 { USB_DEVICE(0x100d, 0x9031) },
898 { USB_DEVICE(0x0db0, 0x3820) },
899 { USB_DEVICE(0x0db0, 0x3821) },
900 { USB_DEVICE(0x0db0, 0x3822) },
901 { USB_DEVICE(0x0db0, 0x3870) },
902 { USB_DEVICE(0x0db0, 0x3871) },
903 { USB_DEVICE(0x0db0, 0x6899) },
904 { USB_DEVICE(0x0db0, 0x821a) },
905 { USB_DEVICE(0x0db0, 0x822a) },
906 { USB_DEVICE(0x0db0, 0x822b) },
907 { USB_DEVICE(0x0db0, 0x822c) },
908 { USB_DEVICE(0x0db0, 0x870a) },
909 { USB_DEVICE(0x0db0, 0x871a) },
910 { USB_DEVICE(0x0db0, 0x871b) },
911 { USB_DEVICE(0x0db0, 0x871c) },
912 { USB_DEVICE(0x0db0, 0x899a) },
914 { USB_DEVICE(0x1b75, 0x3071) },
915 { USB_DEVICE(0x1b75, 0x3072) },
917 { USB_DEVICE(0x20b8, 0x8888) },
919 { USB_DEVICE(0x1d4d, 0x0002) },
920 { USB_DEVICE(0x1d4d, 0x000c) },
921 { USB_DEVICE(0x1d4d, 0x000e) },
922 { USB_DEVICE(0x1d4d, 0x0011) },
924 { USB_DEVICE(0x0471, 0x200f) },
926 { USB_DEVICE(0x2019, 0xab25) },
927 { USB_DEVICE(0x2019, 0xed06) },
929 { USB_DEVICE(0x1a32, 0x0304) },
931 { USB_DEVICE(0x148f, 0x2070) },
932 { USB_DEVICE(0x148f, 0x2770) },
933 { USB_DEVICE(0x148f, 0x2870) },
934 { USB_DEVICE(0x148f, 0x3070) },
935 { USB_DEVICE(0x148f, 0x3071) },
936 { USB_DEVICE(0x148f, 0x3072) },
938 { USB_DEVICE(0x04e8, 0x2018) },
940 { USB_DEVICE(0x129b, 0x1828) },
942 { USB_DEVICE(0x0df6, 0x0017) },
943 { USB_DEVICE(0x0df6, 0x002b) },
944 { USB_DEVICE(0x0df6, 0x002c) },
945 { USB_DEVICE(0x0df6, 0x002d) },
946 { USB_DEVICE(0x0df6, 0x0039) },
947 { USB_DEVICE(0x0df6, 0x003b) },
948 { USB_DEVICE(0x0df6, 0x003d) },
949 { USB_DEVICE(0x0df6, 0x003e) },
950 { USB_DEVICE(0x0df6, 0x003f) },
951 { USB_DEVICE(0x0df6, 0x0040) },
952 { USB_DEVICE(0x0df6, 0x0042) },
953 { USB_DEVICE(0x0df6, 0x0047) },
954 { USB_DEVICE(0x0df6, 0x0048) },
955 { USB_DEVICE(0x0df6, 0x0051) },
956 { USB_DEVICE(0x0df6, 0x005f) },
957 { USB_DEVICE(0x0df6, 0x0060) },
959 { USB_DEVICE(0x083a, 0x6618) },
960 { USB_DEVICE(0x083a, 0x7511) },
961 { USB_DEVICE(0x083a, 0x7512) },
962 { USB_DEVICE(0x083a, 0x7522) },
963 { USB_DEVICE(0x083a, 0x8522) },
964 { USB_DEVICE(0x083a, 0xa618) },
965 { USB_DEVICE(0x083a, 0xa701) },
966 { USB_DEVICE(0x083a, 0xa702) },
967 { USB_DEVICE(0x083a, 0xa703) },
968 { USB_DEVICE(0x083a, 0xb522) },
970 { USB_DEVICE(0x15a9, 0x0006) },
972 { USB_DEVICE(0x177f, 0x0153) },
973 { USB_DEVICE(0x177f, 0x0302) },
974 { USB_DEVICE(0x177f, 0x0313) },
976 { USB_DEVICE(0x157e, 0x300e) },
977 { USB_DEVICE(0x157e, 0x3013) },
979 { USB_DEVICE(0x0cde, 0x0022) },
980 { USB_DEVICE(0x0cde, 0x0025) },
982 { USB_DEVICE(0x5a57, 0x0280) },
983 { USB_DEVICE(0x5a57, 0x0282) },
984 { USB_DEVICE(0x5a57, 0x0283) },
985 { USB_DEVICE(0x5a57, 0x5257) },
987 { USB_DEVICE(0x0586, 0x3416) },
988 { USB_DEVICE(0x0586, 0x3418) },
989 { USB_DEVICE(0x0586, 0x341e) },
990 { USB_DEVICE(0x0586, 0x343e) },
991 #ifdef CONFIG_RT2800USB_RT33XX
993 { USB_DEVICE(0x050d, 0x945b) },
995 { USB_DEVICE(0x148f, 0x3370) },
996 { USB_DEVICE(0x148f, 0x8070) },
998 { USB_DEVICE(0x0df6, 0x0050) },
1000 #ifdef CONFIG_RT2800USB_RT35XX
1002 { USB_DEVICE(0x8516, 0x3572) },
1004 { USB_DEVICE(0x1690, 0x0744) },
1006 { USB_DEVICE(0x167b, 0x4001) },
1008 { USB_DEVICE(0x1740, 0x9801) },
1010 { USB_DEVICE(0x04bb, 0x0944) },
1012 { USB_DEVICE(0x13b1, 0x002f) },
1013 { USB_DEVICE(0x1737, 0x0079) },
1015 { USB_DEVICE(0x148f, 0x3572) },
1017 { USB_DEVICE(0x0df6, 0x0041) },
1018 { USB_DEVICE(0x0df6, 0x0062) },
1020 { USB_DEVICE(0x0930, 0x0a07) },
1022 { USB_DEVICE(0x5a57, 0x0284) },
1024 #ifdef CONFIG_RT2800USB_RT53XX
1026 { USB_DEVICE(0x13d3, 0x3329) },
1027 { USB_DEVICE(0x13d3, 0x3365) },
1029 { USB_DEVICE(0x148f, 0x5370) },
1030 { USB_DEVICE(0x148f, 0x5372) },
1032 #ifdef CONFIG_RT2800USB_UNKNOWN
1034 * Unclear what kind of devices these are (they aren't supported by the
1035 * vendor linux driver).
1038 { USB_DEVICE(0x07b8, 0x3073) },
1039 { USB_DEVICE(0x07b8, 0x3074) },
1040 /* Alpha Networks */
1041 { USB_DEVICE(0x14b2, 0x3c08) },
1042 { USB_DEVICE(0x14b2, 0x3c11) },
1044 { USB_DEVICE(0x0e0b, 0x9031) },
1045 { USB_DEVICE(0x0e0b, 0x9041) },
1047 { USB_DEVICE(0x0b05, 0x166a) },
1048 { USB_DEVICE(0x0b05, 0x1760) },
1049 { USB_DEVICE(0x0b05, 0x1761) },
1050 { USB_DEVICE(0x0b05, 0x1790) },
1051 { USB_DEVICE(0x0b05, 0x179d) },
1053 { USB_DEVICE(0x13d3, 0x3262) },
1054 { USB_DEVICE(0x13d3, 0x3284) },
1055 { USB_DEVICE(0x13d3, 0x3322) },
1057 { USB_DEVICE(0x050d, 0x1003) },
1059 { USB_DEVICE(0x0411, 0x012e) },
1060 { USB_DEVICE(0x0411, 0x0148) },
1061 { USB_DEVICE(0x0411, 0x0150) },
1063 { USB_DEVICE(0x07aa, 0x0041) },
1064 { USB_DEVICE(0x07aa, 0x0042) },
1065 { USB_DEVICE(0x18c5, 0x0008) },
1067 { USB_DEVICE(0x07d1, 0x3c0b) },
1068 { USB_DEVICE(0x07d1, 0x3c17) },
1069 { USB_DEVICE(0x2001, 0x3c17) },
1071 { USB_DEVICE(0x7392, 0x4085) },
1073 { USB_DEVICE(0x203d, 0x14a1) },
1074 /* Fujitsu Stylistic 550 */
1075 { USB_DEVICE(0x1690, 0x0761) },
1077 { USB_DEVICE(0x15a9, 0x0010) },
1079 { USB_DEVICE(0x1044, 0x800c) },
1081 { USB_DEVICE(0x148f, 0xf101) },
1083 { USB_DEVICE(0x04bb, 0x094b) },
1085 { USB_DEVICE(0x1740, 0x0605) },
1086 { USB_DEVICE(0x1740, 0x0615) },
1088 { USB_DEVICE(0x0789, 0x0168) },
1089 { USB_DEVICE(0x0789, 0x0169) },
1091 { USB_DEVICE(0x100d, 0x9032) },
1093 { USB_DEVICE(0x05a6, 0x0101) },
1094 { USB_DEVICE(0x1d4d, 0x0010) },
1096 { USB_DEVICE(0x2019, 0x5201) },
1097 { USB_DEVICE(0x2019, 0xab24) },
1099 { USB_DEVICE(0x18e8, 0x6259) },
1101 { USB_DEVICE(0x08b9, 0x1197) },
1103 { USB_DEVICE(0x0df6, 0x003c) },
1104 { USB_DEVICE(0x0df6, 0x004a) },
1105 { USB_DEVICE(0x0df6, 0x004d) },
1106 { USB_DEVICE(0x0df6, 0x0053) },
1108 { USB_DEVICE(0x083a, 0xa512) },
1109 { USB_DEVICE(0x083a, 0xc522) },
1110 { USB_DEVICE(0x083a, 0xd522) },
1111 { USB_DEVICE(0x083a, 0xf511) },
1113 { USB_DEVICE(0x0586, 0x341a) },
1118 MODULE_AUTHOR(DRV_PROJECT);
1119 MODULE_VERSION(DRV_VERSION);
1120 MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver.");
1121 MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards");
1122 MODULE_DEVICE_TABLE(usb, rt2800usb_device_table);
1123 MODULE_FIRMWARE(FIRMWARE_RT2870);
1124 MODULE_LICENSE("GPL");
1126 static int rt2800usb_probe(struct usb_interface *usb_intf,
1127 const struct usb_device_id *id)
1129 return rt2x00usb_probe(usb_intf, &rt2800usb_ops);
1132 static struct usb_driver rt2800usb_driver = {
1133 .name = KBUILD_MODNAME,
1134 .id_table = rt2800usb_device_table,
1135 .probe = rt2800usb_probe,
1136 .disconnect = rt2x00usb_disconnect,
1137 .suspend = rt2x00usb_suspend,
1138 .resume = rt2x00usb_resume,
1141 static int __init rt2800usb_init(void)
1143 return usb_register(&rt2800usb_driver);
1146 static void __exit rt2800usb_exit(void)
1148 usb_deregister(&rt2800usb_driver);
1151 module_init(rt2800usb_init);
1152 module_exit(rt2800usb_exit);