drivers/spi/atmel-quadspi.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Driver for Atmel QSPI Controller
   4  *
   5  * Copyright (C) 2015 Atmel Corporation
   6  * Copyright (C) 2018 Cryptera A/S
   7  *
   8  * Author: Cyrille Pitchen <cyrille.pitchen@atmel.com>
   9  * Author: Piotr Bugalski <bugalski.piotr@gmail.com>
  10  *
  11  * This driver is based on drivers/mtd/spi-nor/fsl-quadspi.c from Freescale.
  12  */
  13
  14 #include <linux/clk.h>
  15 #include <linux/delay.h>
  16 #include <linux/err.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/io.h>
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/of.h>
  22 #include <linux/of_platform.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/spi/spi-mem.h>
  25
  26 /* QSPI register offsets */
  27 #define QSPI_CR      0x0000  /* Control Register */
  28 #define QSPI_MR      0x0004  /* Mode Register */
  29 #define QSPI_RD      0x0008  /* Receive Data Register */
  30 #define QSPI_TD      0x000c  /* Transmit Data Register */
  31 #define QSPI_SR      0x0010  /* Status Register */
  32 #define QSPI_IER     0x0014  /* Interrupt Enable Register */
  33 #define QSPI_IDR     0x0018  /* Interrupt Disable Register */
  34 #define QSPI_IMR     0x001c  /* Interrupt Mask Register */
  35 #define QSPI_SCR     0x0020  /* Serial Clock Register */
  36
  37 #define QSPI_IAR     0x0030  /* Instruction Address Register */
  38 #define QSPI_ICR     0x0034  /* Instruction Code Register */
  39 #define QSPI_WICR    0x0034  /* Write Instruction Code Register */
  40 #define QSPI_IFR     0x0038  /* Instruction Frame Register */
  41 #define QSPI_RICR    0x003C  /* Read Instruction Code Register */
  42
  43 #define QSPI_SMR     0x0040  /* Scrambling Mode Register */
  44 #define QSPI_SKR     0x0044  /* Scrambling Key Register */
  45
  46 #define QSPI_WPMR    0x00E4  /* Write Protection Mode Register */
  47 #define QSPI_WPSR    0x00E8  /* Write Protection Status Register */
  48
  49 #define QSPI_VERSION 0x00FC  /* Version Register */
  50
  51
  52 /* Bitfields in QSPI_CR (Control Register) */
  53 #define QSPI_CR_QSPIEN                  BIT(0)
  54 #define QSPI_CR_QSPIDIS                 BIT(1)
  55 #define QSPI_CR_SWRST                   BIT(7)
  56 #define QSPI_CR_LASTXFER                BIT(24)
  57
  58 /* Bitfields in QSPI_MR (Mode Register) */
  59 #define QSPI_MR_SMM                     BIT(0)
  60 #define QSPI_MR_LLB                     BIT(1)
  61 #define QSPI_MR_WDRBT                   BIT(2)
  62 #define QSPI_MR_SMRM                    BIT(3)
  63 #define QSPI_MR_CSMODE_MASK             GENMASK(5, 4)
  64 #define QSPI_MR_CSMODE_NOT_RELOADED     (0 << 4)
  65 #define QSPI_MR_CSMODE_LASTXFER         (1 << 4)
  66 #define QSPI_MR_CSMODE_SYSTEMATICALLY   (2 << 4)
  67 #define QSPI_MR_NBBITS_MASK             GENMASK(11, 8)
  68 #define QSPI_MR_NBBITS(n)               ((((n) - 8) << 8) & QSPI_MR_NBBITS_MASK)
  69 #define QSPI_MR_DLYBCT_MASK             GENMASK(23, 16)
  70 #define QSPI_MR_DLYBCT(n)               (((n) << 16) & QSPI_MR_DLYBCT_MASK)
  71 #define QSPI_MR_DLYCS_MASK              GENMASK(31, 24)
  72 #define QSPI_MR_DLYCS(n)                (((n) << 24) & QSPI_MR_DLYCS_MASK)
  73
  74 /* Bitfields in QSPI_SR/QSPI_IER/QSPI_IDR/QSPI_IMR  */
  75 #define QSPI_SR_RDRF                    BIT(0)
  76 #define QSPI_SR_TDRE                    BIT(1)
  77 #define QSPI_SR_TXEMPTY                 BIT(2)
  78 #define QSPI_SR_OVRES                   BIT(3)
  79 #define QSPI_SR_CSR                     BIT(8)
  80 #define QSPI_SR_CSS                     BIT(9)
  81 #define QSPI_SR_INSTRE                  BIT(10)
  82 #define QSPI_SR_QSPIENS                 BIT(24)
  83
  84 #define QSPI_SR_CMD_COMPLETED   (QSPI_SR_INSTRE | QSPI_SR_CSR)
  85
  86 /* Bitfields in QSPI_SCR (Serial Clock Register) */
  87 #define QSPI_SCR_CPOL                   BIT(0)
  88 #define QSPI_SCR_CPHA                   BIT(1)
  89 #define QSPI_SCR_SCBR_MASK              GENMASK(15, 8)
  90 #define QSPI_SCR_SCBR(n)                (((n) << 8) & QSPI_SCR_SCBR_MASK)
  91 #define QSPI_SCR_DLYBS_MASK             GENMASK(23, 16)
  92 #define QSPI_SCR_DLYBS(n)               (((n) << 16) & QSPI_SCR_DLYBS_MASK)
  93
  94 /* Bitfields in QSPI_ICR (Read/Write Instruction Code Register) */
  95 #define QSPI_ICR_INST_MASK              GENMASK(7, 0)
  96 #define QSPI_ICR_INST(inst)             (((inst) << 0) & QSPI_ICR_INST_MASK)
  97 #define QSPI_ICR_OPT_MASK               GENMASK(23, 16)
  98 #define QSPI_ICR_OPT(opt)               (((opt) << 16) & QSPI_ICR_OPT_MASK)
  99
 100 /* Bitfields in QSPI_IFR (Instruction Frame Register) */
 101 #define QSPI_IFR_WIDTH_MASK             GENMASK(2, 0)
 102 #define QSPI_IFR_WIDTH_SINGLE_BIT_SPI   (0 << 0)
 103 #define QSPI_IFR_WIDTH_DUAL_OUTPUT      (1 << 0)
 104 #define QSPI_IFR_WIDTH_QUAD_OUTPUT      (2 << 0)
 105 #define QSPI_IFR_WIDTH_DUAL_IO          (3 << 0)
 106 #define QSPI_IFR_WIDTH_QUAD_IO          (4 << 0)
 107 #define QSPI_IFR_WIDTH_DUAL_CMD         (5 << 0)
 108 #define QSPI_IFR_WIDTH_QUAD_CMD         (6 << 0)
 109 #define QSPI_IFR_INSTEN                 BIT(4)
 110 #define QSPI_IFR_ADDREN                 BIT(5)
 111 #define QSPI_IFR_OPTEN                  BIT(6)
 112 #define QSPI_IFR_DATAEN                 BIT(7)
 113 #define QSPI_IFR_OPTL_MASK              GENMASK(9, 8)
 114 #define QSPI_IFR_OPTL_1BIT              (0 << 8)
 115 #define QSPI_IFR_OPTL_2BIT              (1 << 8)
 116 #define QSPI_IFR_OPTL_4BIT              (2 << 8)
 117 #define QSPI_IFR_OPTL_8BIT              (3 << 8)
 118 #define QSPI_IFR_ADDRL                  BIT(10)
 119 #define QSPI_IFR_TFRTYP_MEM             BIT(12)
 120 #define QSPI_IFR_SAMA5D2_WRITE_TRSFR    BIT(13)
 121 #define QSPI_IFR_CRM                    BIT(14)
 122 #define QSPI_IFR_NBDUM_MASK             GENMASK(20, 16)
 123 #define QSPI_IFR_NBDUM(n)               (((n) << 16) & QSPI_IFR_NBDUM_MASK)
 124 #define QSPI_IFR_APBTFRTYP_READ         BIT(24) /* Defined in SAM9X60 */
 125
 126 /* Bitfields in QSPI_SMR (Scrambling Mode Register) */
 127 #define QSPI_SMR_SCREN                  BIT(0)
 128 #define QSPI_SMR_RVDIS                  BIT(1)
 129
 130 /* Bitfields in QSPI_WPMR (Write Protection Mode Register) */
 131 #define QSPI_WPMR_WPEN                  BIT(0)
 132 #define QSPI_WPMR_WPKEY_MASK            GENMASK(31, 8)
 133 #define QSPI_WPMR_WPKEY(wpkey)          (((wpkey) << 8) & QSPI_WPMR_WPKEY_MASK)
 134
 135 /* Bitfields in QSPI_WPSR (Write Protection Status Register) */
 136 #define QSPI_WPSR_WPVS                  BIT(0)
 137 #define QSPI_WPSR_WPVSRC_MASK           GENMASK(15, 8)
 138 #define QSPI_WPSR_WPVSRC(src)           (((src) << 8) & QSPI_WPSR_WPVSRC)
 139
 140 struct atmel_qspi_caps {
 141         bool has_qspick;
 142         bool has_ricr;
 143 };
 144
 145 struct atmel_qspi {
 146         void __iomem            *regs;
 147         void __iomem            *mem;
 148         struct clk              *pclk;
 149         struct clk              *qspick;
 150         struct platform_device  *pdev;
 151         const struct atmel_qspi_caps *caps;
 152         resource_size_t         mmap_size;
 153         u32                     pending;
 154         u32                     mr;
 155         u32                     scr;
 156         struct completion       cmd_completion;
 157 };
 158
 159 struct atmel_qspi_mode {
 160         u8 cmd_buswidth;
 161         u8 addr_buswidth;
 162         u8 data_buswidth;
 163         u32 config;
 164 };
 165
 166 static const struct atmel_qspi_mode atmel_qspi_modes[] = {
 167         { 1, 1, 1, QSPI_IFR_WIDTH_SINGLE_BIT_SPI },
 168         { 1, 1, 2, QSPI_IFR_WIDTH_DUAL_OUTPUT },
 169         { 1, 1, 4, QSPI_IFR_WIDTH_QUAD_OUTPUT },
 170         { 1, 2, 2, QSPI_IFR_WIDTH_DUAL_IO },
 171         { 1, 4, 4, QSPI_IFR_WIDTH_QUAD_IO },
 172         { 2, 2, 2, QSPI_IFR_WIDTH_DUAL_CMD },
 173         { 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD },
 174 };
 175
 176 static inline bool atmel_qspi_is_compatible(const struct spi_mem_op *op,
 177                                             const struct atmel_qspi_mode *mode)
 178 {
 179         if (op->cmd.buswidth != mode->cmd_buswidth)
 180                 return false;
 181
 182         if (op->addr.nbytes && op->addr.buswidth != mode->addr_buswidth)
 183                 return false;
 184
 185         if (op->data.nbytes && op->data.buswidth != mode->data_buswidth)
 186                 return false;
 187
 188         return true;
 189 }
 190
 191 static int atmel_qspi_find_mode(const struct spi_mem_op *op)
 192 {
 193         u32 i;
 194
 195         for (i = 0; i < ARRAY_SIZE(atmel_qspi_modes); i++)
 196                 if (atmel_qspi_is_compatible(op, &atmel_qspi_modes[i]))
 197                         return i;
 198
 199         return -ENOTSUPP;
 200 }
 201
 202 static bool atmel_qspi_supports_op(struct spi_mem *mem,
 203                                    const struct spi_mem_op *op)
 204 {
 205         if (atmel_qspi_find_mode(op) < 0)
 206                 return false;
 207
 208         /* special case not supported by hardware */
 209         if (op->addr.nbytes == 2 && op->cmd.buswidth != op->addr.buswidth &&
 210                 op->dummy.nbytes == 0)
 211                 return false;
 212
 213         return true;
 214 }
 215
 216 static int atmel_qspi_set_cfg(struct atmel_qspi *aq,
 217                               const struct spi_mem_op *op, u32 *offset)
 218 {
 219         u32 iar, icr, ifr;
 220         u32 dummy_cycles = 0;
 221         int mode;
 222
 223         iar = 0;
 224         icr = QSPI_ICR_INST(op->cmd.opcode);
 225         ifr = QSPI_IFR_INSTEN;
 226
 227         mode = atmel_qspi_find_mode(op);
 228         if (mode < 0)
 229                 return mode;
 230         ifr |= atmel_qspi_modes[mode].config;
 231
 232         if (op->dummy.buswidth && op->dummy.nbytes)
 233                 dummy_cycles = op->dummy.nbytes * 8 / op->dummy.buswidth;
 234
 235         /*
 236          * The controller allows 24 and 32-bit addressing while NAND-flash
 237          * requires 16-bit long. Handling 8-bit long addresses is done using
 238          * the option field. For the 16-bit addresses, the workaround depends
 239          * of the number of requested dummy bits. If there are 8 or more dummy
 240          * cycles, the address is shifted and sent with the first dummy byte.
 241          * Otherwise opcode is disabled and the first byte of the address
 242          * contains the command opcode (works only if the opcode and address
 243          * use the same buswidth). The limitation is when the 16-bit address is
 244          * used without enough dummy cycles and the opcode is using a different
 245          * buswidth than the address.
 246          */
 247         if (op->addr.buswidth) {
 248                 switch (op->addr.nbytes) {
 249                 case 0:
 250                         break;
 251                 case 1:
 252                         ifr |= QSPI_IFR_OPTEN | QSPI_IFR_OPTL_8BIT;
 253                         icr |= QSPI_ICR_OPT(op->addr.val & 0xff);
 254                         break;
 255                 case 2:
 256                         if (dummy_cycles < 8 / op->addr.buswidth) {
 257                                 ifr &= ~QSPI_IFR_INSTEN;
 258                                 ifr |= QSPI_IFR_ADDREN;
 259                                 iar = (op->cmd.opcode << 16) |
 260                                         (op->addr.val & 0xffff);
 261                         } else {
 262                                 ifr |= QSPI_IFR_ADDREN;
 263                                 iar = (op->addr.val << 8) & 0xffffff;
 264                                 dummy_cycles -= 8 / op->addr.buswidth;
 265                         }
 266                         break;
 267                 case 3:
 268                         ifr |= QSPI_IFR_ADDREN;
 269                         iar = op->addr.val & 0xffffff;
 270                         break;
 271                 case 4:
 272                         ifr |= QSPI_IFR_ADDREN | QSPI_IFR_ADDRL;
 273                         iar = op->addr.val & 0x7ffffff;
 274                         break;
 275                 default:
 276                         return -ENOTSUPP;
 277                 }
 278         }
 279
 280         /* offset of the data access in the QSPI memory space */
 281         *offset = iar;
 282
 283         /* Set number of dummy cycles */
 284         if (dummy_cycles)
 285                 ifr |= QSPI_IFR_NBDUM(dummy_cycles);
 286
 287         /* Set data enable */
 288         if (op->data.nbytes)
 289                 ifr |= QSPI_IFR_DATAEN;
 290
 291         /*
 292          * If the QSPI controller is set in regular SPI mode, set it in
 293          * Serial Memory Mode (SMM).
 294          */
 295         if (aq->mr != QSPI_MR_SMM) {
 296                 writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR);
 297                 aq->mr = QSPI_MR_SMM;
 298         }
 299
 300         /* Clear pending interrupts */
 301         (void)readl_relaxed(aq->regs + QSPI_SR);
 302
 303         if (aq->caps->has_ricr) {
 304                 if (!op->addr.nbytes && op->data.dir == SPI_MEM_DATA_IN)
 305                         ifr |= QSPI_IFR_APBTFRTYP_READ;
 306
 307                 /* Set QSPI Instruction Frame registers */
 308                 writel_relaxed(iar, aq->regs + QSPI_IAR);
 309                 if (op->data.dir == SPI_MEM_DATA_IN)
 310                         writel_relaxed(icr, aq->regs + QSPI_RICR);
 311                 else
 312                         writel_relaxed(icr, aq->regs + QSPI_WICR);
 313                 writel_relaxed(ifr, aq->regs + QSPI_IFR);
 314         } else {
 315                 if (op->data.dir == SPI_MEM_DATA_OUT)
 316                         ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
 317
 318                 /* Set QSPI Instruction Frame registers */
 319                 writel_relaxed(iar, aq->regs + QSPI_IAR);
 320                 writel_relaxed(icr, aq->regs + QSPI_ICR);
 321                 writel_relaxed(ifr, aq->regs + QSPI_IFR);
 322         }
 323
 324         return 0;
 325 }
 326
 327 static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 328 {
 329         struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->master);
 330         u32 sr, offset;
 331         int err;
 332
 333         /*
 334          * Check if the address exceeds the MMIO window size. An improvement
 335          * would be to add support for regular SPI mode and fall back to it
 336          * when the flash memories overrun the controller's memory space.
 337          */
 338         if (op->addr.val + op->data.nbytes > aq->mmap_size)
 339                 return -ENOTSUPP;
 340
 341         err = atmel_qspi_set_cfg(aq, op, &offset);
 342         if (err)
 343                 return err;
 344
 345         /* Skip to the final steps if there is no data */
 346         if (op->data.nbytes) {
 347                 /* Dummy read of QSPI_IFR to synchronize APB and AHB accesses */
 348                 (void)readl_relaxed(aq->regs + QSPI_IFR);
 349
 350                 /* Send/Receive data */
 351                 if (op->data.dir == SPI_MEM_DATA_IN)
 352                         _memcpy_fromio(op->data.buf.in, aq->mem + offset,
 353                                        op->data.nbytes);
 354                 else
 355                         _memcpy_toio(aq->mem + offset, op->data.buf.out,
 356                                      op->data.nbytes);
 357
 358                 /* Release the chip-select */
 359                 writel_relaxed(QSPI_CR_LASTXFER, aq->regs + QSPI_CR);
 360         }
 361
 362         /* Poll INSTRuction End status */
 363         sr = readl_relaxed(aq->regs + QSPI_SR);
 364         if ((sr & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED)
 365                 return err;
 366
 367         /* Wait for INSTRuction End interrupt */
 368         reinit_completion(&aq->cmd_completion);
 369         aq->pending = sr & QSPI_SR_CMD_COMPLETED;
 370         writel_relaxed(QSPI_SR_CMD_COMPLETED, aq->regs + QSPI_IER);
 371         if (!wait_for_completion_timeout(&aq->cmd_completion,
 372                                          msecs_to_jiffies(1000)))
 373                 err = -ETIMEDOUT;
 374         writel_relaxed(QSPI_SR_CMD_COMPLETED, aq->regs + QSPI_IDR);
 375
 376         return err;
 377 }
 378
 379 static const char *atmel_qspi_get_name(struct spi_mem *spimem)
 380 {
 381         return dev_name(spimem->spi->dev.parent);
 382 }
 383
 384 static const struct spi_controller_mem_ops atmel_qspi_mem_ops = {
 385         .supports_op = atmel_qspi_supports_op,
 386         .exec_op = atmel_qspi_exec_op,
 387         .get_name = atmel_qspi_get_name
 388 };
 389
 390 static int atmel_qspi_setup(struct spi_device *spi)
 391 {
 392         struct spi_controller *ctrl = spi->master;
 393         struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
 394         unsigned long src_rate;
 395         u32 scbr;
 396
 397         if (ctrl->busy)
 398                 return -EBUSY;
 399
 400         if (!spi->max_speed_hz)
 401                 return -EINVAL;
 402
 403         src_rate = clk_get_rate(aq->pclk);
 404         if (!src_rate)
 405                 return -EINVAL;
 406
 407         /* Compute the QSPI baudrate */
 408         scbr = DIV_ROUND_UP(src_rate, spi->max_speed_hz);
 409         if (scbr > 0)
 410                 scbr--;
 411
 412         aq->scr = QSPI_SCR_SCBR(scbr);
 413         writel_relaxed(aq->scr, aq->regs + QSPI_SCR);
 414
 415         return 0;
 416 }
 417
 418 static void atmel_qspi_init(struct atmel_qspi *aq)
 419 {
 420         /* Reset the QSPI controller */
 421         writel_relaxed(QSPI_CR_SWRST, aq->regs + QSPI_CR);
 422
 423         /* Set the QSPI controller by default in Serial Memory Mode */
 424         writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR);
 425         aq->mr = QSPI_MR_SMM;
 426
 427         /* Enable the QSPI controller */
 428         writel_relaxed(QSPI_CR_QSPIEN, aq->regs + QSPI_CR);
 429 }
 430
 431 static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id)
 432 {
 433         struct atmel_qspi *aq = dev_id;
 434         u32 status, mask, pending;
 435
 436         status = readl_relaxed(aq->regs + QSPI_SR);
 437         mask = readl_relaxed(aq->regs + QSPI_IMR);
 438         pending = status & mask;
 439
 440         if (!pending)
 441                 return IRQ_NONE;
 442
 443         aq->pending |= pending;
 444         if ((aq->pending & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED)
 445                 complete(&aq->cmd_completion);
 446
 447         return IRQ_HANDLED;
 448 }
 449
 450 static int atmel_qspi_probe(struct platform_device *pdev)
 451 {
 452         struct spi_controller *ctrl;
 453         struct atmel_qspi *aq;
 454         struct resource *res;
 455         int irq, err = 0;
 456
 457         ctrl = spi_alloc_master(&pdev->dev, sizeof(*aq));
 458         if (!ctrl)
 459                 return -ENOMEM;
 460
 461         ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD;
 462         ctrl->setup = atmel_qspi_setup;
 463         ctrl->bus_num = -1;
 464         ctrl->mem_ops = &atmel_qspi_mem_ops;
 465         ctrl->num_chipselect = 1;
 466         ctrl->dev.of_node = pdev->dev.of_node;
 467         platform_set_drvdata(pdev, ctrl);
 468
 469         aq = spi_controller_get_devdata(ctrl);
 470
 471         init_completion(&aq->cmd_completion);
 472         aq->pdev = pdev;
 473
 474         /* Map the registers */
 475         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_base");
 476         aq->regs = devm_ioremap_resource(&pdev->dev, res);
 477         if (IS_ERR(aq->regs)) {
 478                 dev_err(&pdev->dev, "missing registers\n");
 479                 err = PTR_ERR(aq->regs);
 480                 goto exit;
 481         }
 482
 483         /* Map the AHB memory */
 484         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mmap");
 485         aq->mem = devm_ioremap_resource(&pdev->dev, res);
 486         if (IS_ERR(aq->mem)) {
 487                 dev_err(&pdev->dev, "missing AHB memory\n");
 488                 err = PTR_ERR(aq->mem);
 489                 goto exit;
 490         }
 491
 492         aq->mmap_size = resource_size(res);
 493
 494         /* Get the peripheral clock */
 495         aq->pclk = devm_clk_get(&pdev->dev, "pclk");
 496         if (IS_ERR(aq->pclk))
 497                 aq->pclk = devm_clk_get(&pdev->dev, NULL);
 498
 499         if (IS_ERR(aq->pclk)) {
 500                 dev_err(&pdev->dev, "missing peripheral clock\n");
 501                 err = PTR_ERR(aq->pclk);
 502                 goto exit;
 503         }
 504
 505         /* Enable the peripheral clock */
 506         err = clk_prepare_enable(aq->pclk);
 507         if (err) {
 508                 dev_err(&pdev->dev, "failed to enable the peripheral clock\n");
 509                 goto exit;
 510         }
 511
 512         aq->caps = of_device_get_match_data(&pdev->dev);
 513         if (!aq->caps) {
 514                 dev_err(&pdev->dev, "Could not retrieve QSPI caps\n");
 515                 err = -EINVAL;
 516                 goto exit;
 517         }
 518
 519         if (aq->caps->has_qspick) {
 520                 /* Get the QSPI system clock */
 521                 aq->qspick = devm_clk_get(&pdev->dev, "qspick");
 522                 if (IS_ERR(aq->qspick)) {
 523                         dev_err(&pdev->dev, "missing system clock\n");
 524                         err = PTR_ERR(aq->qspick);
 525                         goto disable_pclk;
 526                 }
 527
 528                 /* Enable the QSPI system clock */
 529                 err = clk_prepare_enable(aq->qspick);
 530                 if (err) {
 531                         dev_err(&pdev->dev,
 532                                 "failed to enable the QSPI system clock\n");
 533                         goto disable_pclk;
 534                 }
 535         }
 536
 537         /* Request the IRQ */
 538         irq = platform_get_irq(pdev, 0);
 539         if (irq < 0) {
 540                 err = irq;
 541                 goto disable_qspick;
 542         }
 543         err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt,
 544                                0, dev_name(&pdev->dev), aq);
 545         if (err)
 546                 goto disable_qspick;
 547
 548         atmel_qspi_init(aq);
 549
 550         err = spi_register_controller(ctrl);
 551         if (err)
 552                 goto disable_qspick;
 553
 554         return 0;
 555
 556 disable_qspick:
 557         clk_disable_unprepare(aq->qspick);
 558 disable_pclk:
 559         clk_disable_unprepare(aq->pclk);
 560 exit:
 561         spi_controller_put(ctrl);
 562
 563         return err;
 564 }
 565
 566 static int atmel_qspi_remove(struct platform_device *pdev)
 567 {
 568         struct spi_controller *ctrl = platform_get_drvdata(pdev);
 569         struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
 570
 571         spi_unregister_controller(ctrl);
 572         writel_relaxed(QSPI_CR_QSPIDIS, aq->regs + QSPI_CR);
 573         clk_disable_unprepare(aq->qspick);
 574         clk_disable_unprepare(aq->pclk);
 575         return 0;
 576 }
 577
 578 static int __maybe_unused atmel_qspi_suspend(struct device *dev)
 579 {
 580         struct spi_controller *ctrl = dev_get_drvdata(dev);
 581         struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
 582
 583         clk_disable_unprepare(aq->qspick);
 584         clk_disable_unprepare(aq->pclk);
 585
 586         return 0;
 587 }
 588
 589 static int __maybe_unused atmel_qspi_resume(struct device *dev)
 590 {
 591         struct spi_controller *ctrl = dev_get_drvdata(dev);
 592         struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
 593
 594         clk_prepare_enable(aq->pclk);
 595         clk_prepare_enable(aq->qspick);
 596
 597         atmel_qspi_init(aq);
 598
 599         writel_relaxed(aq->scr, aq->regs + QSPI_SCR);
 600
 601         return 0;
 602 }
 603
 604 static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
 605                          atmel_qspi_resume);
 606
 607 static const struct atmel_qspi_caps atmel_sama5d2_qspi_caps = {};
 608
 609 static const struct atmel_qspi_caps atmel_sam9x60_qspi_caps = {
 610         .has_qspick = true,
 611         .has_ricr = true,
 612 };
 613
 614 static const struct of_device_id atmel_qspi_dt_ids[] = {
 615         {
 616                 .compatible = "atmel,sama5d2-qspi",
 617                 .data = &atmel_sama5d2_qspi_caps,
 618         },
 619         {
 620                 .compatible = "microchip,sam9x60-qspi",
 621                 .data = &atmel_sam9x60_qspi_caps,
 622         },
 623         { /* sentinel */ }
 624 };
 625
 626 MODULE_DEVICE_TABLE(of, atmel_qspi_dt_ids);
 627
 628 static struct platform_driver atmel_qspi_driver = {
 629         .driver = {
 630                 .name   = "atmel_qspi",
 631                 .of_match_table = atmel_qspi_dt_ids,
 632                 .pm     = &atmel_qspi_pm_ops,
 633         },
 634         .probe          = atmel_qspi_probe,
 635         .remove         = atmel_qspi_remove,
 636 };
 637 module_platform_driver(atmel_qspi_driver);
 638
 639 MODULE_AUTHOR("Cyrille Pitchen <cyrille.pitchen@atmel.com>");
 640 MODULE_AUTHOR("Piotr Bugalski <bugalski.piotr@gmail.com");
 641 MODULE_DESCRIPTION("Atmel QSPI Controller driver");
 642 MODULE_LICENSE("GPL v2");