drivers/usb/gadget/function/f_printer.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * f_printer.c - USB printer function driver
   4  *
   5  * Copied from drivers/usb/gadget/legacy/printer.c,
   6  * which was:
   7  *
   8  * printer.c -- Printer gadget driver
   9  *
  10  * Copyright (C) 2003-2005 David Brownell
  11  * Copyright (C) 2006 Craig W. Nadler
  12  */
  13
  14 #include <linux/module.h>
  15 #include <linux/kernel.h>
  16 #include <linux/delay.h>
  17 #include <linux/ioport.h>
  18 #include <linux/sched.h>
  19 #include <linux/slab.h>
  20 #include <linux/mutex.h>
  21 #include <linux/errno.h>
  22 #include <linux/init.h>
  23 #include <linux/idr.h>
  24 #include <linux/timer.h>
  25 #include <linux/list.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/device.h>
  28 #include <linux/moduleparam.h>
  29 #include <linux/fs.h>
  30 #include <linux/poll.h>
  31 #include <linux/types.h>
  32 #include <linux/ctype.h>
  33 #include <linux/cdev.h>
  34 #include <linux/kref.h>
  35
  36 #include <asm/byteorder.h>
  37 #include <linux/io.h>
  38 #include <linux/irq.h>
  39 #include <linux/uaccess.h>
  40 #include <asm/unaligned.h>
  41
  42 #include <linux/usb/ch9.h>
  43 #include <linux/usb/composite.h>
  44 #include <linux/usb/gadget.h>
  45 #include <linux/usb/g_printer.h>
  46
  47 #include "u_printer.h"
  48
  49 #define PRINTER_MINORS          4
  50 #define GET_DEVICE_ID           0
  51 #define GET_PORT_STATUS         1
  52 #define SOFT_RESET              2
  53
  54 #define DEFAULT_Q_LEN           10 /* same as legacy g_printer gadget */
  55
  56 static int major, minors;
  57 static struct class *usb_gadget_class;
  58 static DEFINE_IDA(printer_ida);
  59 static DEFINE_MUTEX(printer_ida_lock); /* protects access do printer_ida */
  60
  61 /*-------------------------------------------------------------------------*/
  62
  63 struct printer_dev {
  64         spinlock_t              lock;           /* lock this structure */
  65         /* lock buffer lists during read/write calls */
  66         struct mutex            lock_printer_io;
  67         struct usb_gadget       *gadget;
  68         s8                      interface;
  69         struct usb_ep           *in_ep, *out_ep;
  70         struct kref             kref;
  71         struct list_head        rx_reqs;        /* List of free RX structs */
  72         struct list_head        rx_reqs_active; /* List of Active RX xfers */
  73         struct list_head        rx_buffers;     /* List of completed xfers */
  74         /* wait until there is data to be read. */
  75         wait_queue_head_t       rx_wait;
  76         struct list_head        tx_reqs;        /* List of free TX structs */
  77         struct list_head        tx_reqs_active; /* List of Active TX xfers */
  78         /* Wait until there are write buffers available to use. */
  79         wait_queue_head_t       tx_wait;
  80         /* Wait until all write buffers have been sent. */
  81         wait_queue_head_t       tx_flush_wait;
  82         struct usb_request      *current_rx_req;
  83         size_t                  current_rx_bytes;
  84         u8                      *current_rx_buf;
  85         u8                      printer_status;
  86         u8                      reset_printer;
  87         int                     minor;
  88         struct cdev             printer_cdev;
  89         u8                      printer_cdev_open;
  90         wait_queue_head_t       wait;
  91         unsigned                q_len;
  92         char                    *pnp_string;    /* We don't own memory! */
  93         struct usb_function     function;
  94 };
  95
  96 static inline struct printer_dev *func_to_printer(struct usb_function *f)
  97 {
  98         return container_of(f, struct printer_dev, function);
  99 }
 100
 101 /*-------------------------------------------------------------------------*/
 102
 103 /*
 104  * DESCRIPTORS ... most are static, but strings and (full) configuration
 105  * descriptors are built on demand.
 106  */
 107
 108 /* holds our biggest descriptor */
 109 #define USB_DESC_BUFSIZE                256
 110 #define USB_BUFSIZE                     8192
 111
 112 static struct usb_interface_descriptor intf_desc = {
 113         .bLength =              sizeof(intf_desc),
 114         .bDescriptorType =      USB_DT_INTERFACE,
 115         .bNumEndpoints =        2,
 116         .bInterfaceClass =      USB_CLASS_PRINTER,
 117         .bInterfaceSubClass =   1,      /* Printer Sub-Class */
 118         .bInterfaceProtocol =   2,      /* Bi-Directional */
 119         .iInterface =           0
 120 };
 121
 122 static struct usb_endpoint_descriptor fs_ep_in_desc = {
 123         .bLength =              USB_DT_ENDPOINT_SIZE,
 124         .bDescriptorType =      USB_DT_ENDPOINT,
 125         .bEndpointAddress =     USB_DIR_IN,
 126         .bmAttributes =         USB_ENDPOINT_XFER_BULK
 127 };
 128
 129 static struct usb_endpoint_descriptor fs_ep_out_desc = {
 130         .bLength =              USB_DT_ENDPOINT_SIZE,
 131         .bDescriptorType =      USB_DT_ENDPOINT,
 132         .bEndpointAddress =     USB_DIR_OUT,
 133         .bmAttributes =         USB_ENDPOINT_XFER_BULK
 134 };
 135
 136 static struct usb_descriptor_header *fs_printer_function[] = {
 137         (struct usb_descriptor_header *) &intf_desc,
 138         (struct usb_descriptor_header *) &fs_ep_in_desc,
 139         (struct usb_descriptor_header *) &fs_ep_out_desc,
 140         NULL
 141 };
 142
 143 /*
 144  * usb 2.0 devices need to expose both high speed and full speed
 145  * descriptors, unless they only run at full speed.
 146  */
 147
 148 static struct usb_endpoint_descriptor hs_ep_in_desc = {
 149         .bLength =              USB_DT_ENDPOINT_SIZE,
 150         .bDescriptorType =      USB_DT_ENDPOINT,
 151         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 152         .wMaxPacketSize =       cpu_to_le16(512)
 153 };
 154
 155 static struct usb_endpoint_descriptor hs_ep_out_desc = {
 156         .bLength =              USB_DT_ENDPOINT_SIZE,
 157         .bDescriptorType =      USB_DT_ENDPOINT,
 158         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 159         .wMaxPacketSize =       cpu_to_le16(512)
 160 };
 161
 162 static struct usb_descriptor_header *hs_printer_function[] = {
 163         (struct usb_descriptor_header *) &intf_desc,
 164         (struct usb_descriptor_header *) &hs_ep_in_desc,
 165         (struct usb_descriptor_header *) &hs_ep_out_desc,
 166         NULL
 167 };
 168
 169 /*
 170  * Added endpoint descriptors for 3.0 devices
 171  */
 172
 173 static struct usb_endpoint_descriptor ss_ep_in_desc = {
 174         .bLength =              USB_DT_ENDPOINT_SIZE,
 175         .bDescriptorType =      USB_DT_ENDPOINT,
 176         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 177         .wMaxPacketSize =       cpu_to_le16(1024),
 178 };
 179
 180 static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = {
 181         .bLength =              sizeof(ss_ep_in_comp_desc),
 182         .bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
 183 };
 184
 185 static struct usb_endpoint_descriptor ss_ep_out_desc = {
 186         .bLength =              USB_DT_ENDPOINT_SIZE,
 187         .bDescriptorType =      USB_DT_ENDPOINT,
 188         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 189         .wMaxPacketSize =       cpu_to_le16(1024),
 190 };
 191
 192 static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = {
 193         .bLength =              sizeof(ss_ep_out_comp_desc),
 194         .bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
 195 };
 196
 197 static struct usb_descriptor_header *ss_printer_function[] = {
 198         (struct usb_descriptor_header *) &intf_desc,
 199         (struct usb_descriptor_header *) &ss_ep_in_desc,
 200         (struct usb_descriptor_header *) &ss_ep_in_comp_desc,
 201         (struct usb_descriptor_header *) &ss_ep_out_desc,
 202         (struct usb_descriptor_header *) &ss_ep_out_comp_desc,
 203         NULL
 204 };
 205
 206 /* maxpacket and other transfer characteristics vary by speed. */
 207 static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
 208                                         struct usb_endpoint_descriptor *fs,
 209                                         struct usb_endpoint_descriptor *hs,
 210                                         struct usb_endpoint_descriptor *ss)
 211 {
 212         switch (gadget->speed) {
 213         case USB_SPEED_SUPER:
 214                 return ss;
 215         case USB_SPEED_HIGH:
 216                 return hs;
 217         default:
 218                 return fs;
 219         }
 220 }
 221
 222 /*-------------------------------------------------------------------------*/
 223
 224 static void printer_dev_free(struct kref *kref)
 225 {
 226         struct printer_dev *dev = container_of(kref, struct printer_dev, kref);
 227
 228         kfree(dev);
 229 }
 230
 231 static struct usb_request *
 232 printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
 233 {
 234         struct usb_request      *req;
 235
 236         req = usb_ep_alloc_request(ep, gfp_flags);
 237
 238         if (req != NULL) {
 239                 req->length = len;
 240                 req->buf = kmalloc(len, gfp_flags);
 241                 if (req->buf == NULL) {
 242                         usb_ep_free_request(ep, req);
 243                         return NULL;
 244                 }
 245         }
 246
 247         return req;
 248 }
 249
 250 static void
 251 printer_req_free(struct usb_ep *ep, struct usb_request *req)
 252 {
 253         if (ep != NULL && req != NULL) {
 254                 kfree(req->buf);
 255                 usb_ep_free_request(ep, req);
 256         }
 257 }
 258
 259 /*-------------------------------------------------------------------------*/
 260
 261 static void rx_complete(struct usb_ep *ep, struct usb_request *req)
 262 {
 263         struct printer_dev      *dev = ep->driver_data;
 264         int                     status = req->status;
 265         unsigned long           flags;
 266
 267         spin_lock_irqsave(&dev->lock, flags);
 268
 269         list_del_init(&req->list);      /* Remode from Active List */
 270
 271         switch (status) {
 272
 273         /* normal completion */
 274         case 0:
 275                 if (req->actual > 0) {
 276                         list_add_tail(&req->list, &dev->rx_buffers);
 277                         DBG(dev, "G_Printer : rx length %d\n", req->actual);
 278                 } else {
 279                         list_add(&req->list, &dev->rx_reqs);
 280                 }
 281                 break;
 282
 283         /* software-driven interface shutdown */
 284         case -ECONNRESET:               /* unlink */
 285         case -ESHUTDOWN:                /* disconnect etc */
 286                 VDBG(dev, "rx shutdown, code %d\n", status);
 287                 list_add(&req->list, &dev->rx_reqs);
 288                 break;
 289
 290         /* for hardware automagic (such as pxa) */
 291         case -ECONNABORTED:             /* endpoint reset */
 292                 DBG(dev, "rx %s reset\n", ep->name);
 293                 list_add(&req->list, &dev->rx_reqs);
 294                 break;
 295
 296         /* data overrun */
 297         case -EOVERFLOW:
 298                 fallthrough;
 299
 300         default:
 301                 DBG(dev, "rx status %d\n", status);
 302                 list_add(&req->list, &dev->rx_reqs);
 303                 break;
 304         }
 305
 306         wake_up_interruptible(&dev->rx_wait);
 307         spin_unlock_irqrestore(&dev->lock, flags);
 308 }
 309
 310 static void tx_complete(struct usb_ep *ep, struct usb_request *req)
 311 {
 312         struct printer_dev      *dev = ep->driver_data;
 313
 314         switch (req->status) {
 315         default:
 316                 VDBG(dev, "tx err %d\n", req->status);
 317                 fallthrough;
 318         case -ECONNRESET:               /* unlink */
 319         case -ESHUTDOWN:                /* disconnect etc */
 320                 break;
 321         case 0:
 322                 break;
 323         }
 324
 325         spin_lock(&dev->lock);
 326         /* Take the request struct off the active list and put it on the
 327          * free list.
 328          */
 329         list_del_init(&req->list);
 330         list_add(&req->list, &dev->tx_reqs);
 331         wake_up_interruptible(&dev->tx_wait);
 332         if (likely(list_empty(&dev->tx_reqs_active)))
 333                 wake_up_interruptible(&dev->tx_flush_wait);
 334
 335         spin_unlock(&dev->lock);
 336 }
 337
 338 /*-------------------------------------------------------------------------*/
 339
 340 static int
 341 printer_open(struct inode *inode, struct file *fd)
 342 {
 343         struct printer_dev      *dev;
 344         unsigned long           flags;
 345         int                     ret = -EBUSY;
 346
 347         dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
 348
 349         spin_lock_irqsave(&dev->lock, flags);
 350
 351         if (dev->interface < 0) {
 352                 spin_unlock_irqrestore(&dev->lock, flags);
 353                 return -ENODEV;
 354         }
 355
 356         if (!dev->printer_cdev_open) {
 357                 dev->printer_cdev_open = 1;
 358                 fd->private_data = dev;
 359                 ret = 0;
 360                 /* Change the printer status to show that it's on-line. */
 361                 dev->printer_status |= PRINTER_SELECTED;
 362         }
 363
 364         spin_unlock_irqrestore(&dev->lock, flags);
 365
 366         kref_get(&dev->kref);
 367         DBG(dev, "printer_open returned %x\n", ret);
 368         return ret;
 369 }
 370
 371 static int
 372 printer_close(struct inode *inode, struct file *fd)
 373 {
 374         struct printer_dev      *dev = fd->private_data;
 375         unsigned long           flags;
 376
 377         spin_lock_irqsave(&dev->lock, flags);
 378         dev->printer_cdev_open = 0;
 379         fd->private_data = NULL;
 380         /* Change printer status to show that the printer is off-line. */
 381         dev->printer_status &= ~PRINTER_SELECTED;
 382         spin_unlock_irqrestore(&dev->lock, flags);
 383
 384         kref_put(&dev->kref, printer_dev_free);
 385         DBG(dev, "printer_close\n");
 386
 387         return 0;
 388 }
 389
 390 /* This function must be called with interrupts turned off. */
 391 static void
 392 setup_rx_reqs(struct printer_dev *dev)
 393 {
 394         struct usb_request              *req;
 395
 396         while (likely(!list_empty(&dev->rx_reqs))) {
 397                 int error;
 398
 399                 req = container_of(dev->rx_reqs.next,
 400                                 struct usb_request, list);
 401                 list_del_init(&req->list);
 402
 403                 /* The USB Host sends us whatever amount of data it wants to
 404                  * so we always set the length field to the full USB_BUFSIZE.
 405                  * If the amount of data is more than the read() caller asked
 406                  * for it will be stored in the request buffer until it is
 407                  * asked for by read().
 408                  */
 409                 req->length = USB_BUFSIZE;
 410                 req->complete = rx_complete;
 411
 412                 /* here, we unlock, and only unlock, to avoid deadlock. */
 413                 spin_unlock(&dev->lock);
 414                 error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
 415                 spin_lock(&dev->lock);
 416                 if (error) {
 417                         DBG(dev, "rx submit --> %d\n", error);
 418                         list_add(&req->list, &dev->rx_reqs);
 419                         break;
 420                 }
 421                 /* if the req is empty, then add it into dev->rx_reqs_active. */
 422                 else if (list_empty(&req->list))
 423                         list_add(&req->list, &dev->rx_reqs_active);
 424         }
 425 }
 426
 427 static ssize_t
 428 printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 429 {
 430         struct printer_dev              *dev = fd->private_data;
 431         unsigned long                   flags;
 432         size_t                          size;
 433         size_t                          bytes_copied;
 434         struct usb_request              *req;
 435         /* This is a pointer to the current USB rx request. */
 436         struct usb_request              *current_rx_req;
 437         /* This is the number of bytes in the current rx buffer. */
 438         size_t                          current_rx_bytes;
 439         /* This is a pointer to the current rx buffer. */
 440         u8                              *current_rx_buf;
 441
 442         if (len == 0)
 443                 return -EINVAL;
 444
 445         DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
 446
 447         mutex_lock(&dev->lock_printer_io);
 448         spin_lock_irqsave(&dev->lock, flags);
 449
 450         if (dev->interface < 0) {
 451                 spin_unlock_irqrestore(&dev->lock, flags);
 452                 mutex_unlock(&dev->lock_printer_io);
 453                 return -ENODEV;
 454         }
 455
 456         /* We will use this flag later to check if a printer reset happened
 457          * after we turn interrupts back on.
 458          */
 459         dev->reset_printer = 0;
 460
 461         setup_rx_reqs(dev);
 462
 463         bytes_copied = 0;
 464         current_rx_req = dev->current_rx_req;
 465         current_rx_bytes = dev->current_rx_bytes;
 466         current_rx_buf = dev->current_rx_buf;
 467         dev->current_rx_req = NULL;
 468         dev->current_rx_bytes = 0;
 469         dev->current_rx_buf = NULL;
 470
 471         /* Check if there is any data in the read buffers. Please note that
 472          * current_rx_bytes is the number of bytes in the current rx buffer.
 473          * If it is zero then check if there are any other rx_buffers that
 474          * are on the completed list. We are only out of data if all rx
 475          * buffers are empty.
 476          */
 477         if ((current_rx_bytes == 0) &&
 478                         (likely(list_empty(&dev->rx_buffers)))) {
 479                 /* Turn interrupts back on before sleeping. */
 480                 spin_unlock_irqrestore(&dev->lock, flags);
 481
 482                 /*
 483                  * If no data is available check if this is a NON-Blocking
 484                  * call or not.
 485                  */
 486                 if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
 487                         mutex_unlock(&dev->lock_printer_io);
 488                         return -EAGAIN;
 489                 }
 490
 491                 /* Sleep until data is available */
 492                 wait_event_interruptible(dev->rx_wait,
 493                                 (likely(!list_empty(&dev->rx_buffers))));
 494                 spin_lock_irqsave(&dev->lock, flags);
 495         }
 496
 497         /* We have data to return then copy it to the caller's buffer.*/
 498         while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers)))
 499                         && len) {
 500                 if (current_rx_bytes == 0) {
 501                         req = container_of(dev->rx_buffers.next,
 502                                         struct usb_request, list);
 503                         list_del_init(&req->list);
 504
 505                         if (req->actual && req->buf) {
 506                                 current_rx_req = req;
 507                                 current_rx_bytes = req->actual;
 508                                 current_rx_buf = req->buf;
 509                         } else {
 510                                 list_add(&req->list, &dev->rx_reqs);
 511                                 continue;
 512                         }
 513                 }
 514
 515                 /* Don't leave irqs off while doing memory copies */
 516                 spin_unlock_irqrestore(&dev->lock, flags);
 517
 518                 if (len > current_rx_bytes)
 519                         size = current_rx_bytes;
 520                 else
 521                         size = len;
 522
 523                 size -= copy_to_user(buf, current_rx_buf, size);
 524                 bytes_copied += size;
 525                 len -= size;
 526                 buf += size;
 527
 528                 spin_lock_irqsave(&dev->lock, flags);
 529
 530                 /* We've disconnected or reset so return. */
 531                 if (dev->reset_printer) {
 532                         list_add(&current_rx_req->list, &dev->rx_reqs);
 533                         spin_unlock_irqrestore(&dev->lock, flags);
 534                         mutex_unlock(&dev->lock_printer_io);
 535                         return -EAGAIN;
 536                 }
 537
 538                 /* If we not returning all the data left in this RX request
 539                  * buffer then adjust the amount of data left in the buffer.
 540                  * Othewise if we are done with this RX request buffer then
 541                  * requeue it to get any incoming data from the USB host.
 542                  */
 543                 if (size < current_rx_bytes) {
 544                         current_rx_bytes -= size;
 545                         current_rx_buf += size;
 546                 } else {
 547                         list_add(&current_rx_req->list, &dev->rx_reqs);
 548                         current_rx_bytes = 0;
 549                         current_rx_buf = NULL;
 550                         current_rx_req = NULL;
 551                 }
 552         }
 553
 554         dev->current_rx_req = current_rx_req;
 555         dev->current_rx_bytes = current_rx_bytes;
 556         dev->current_rx_buf = current_rx_buf;
 557
 558         spin_unlock_irqrestore(&dev->lock, flags);
 559         mutex_unlock(&dev->lock_printer_io);
 560
 561         DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
 562
 563         if (bytes_copied)
 564                 return bytes_copied;
 565         else
 566                 return -EAGAIN;
 567 }
 568
 569 static ssize_t
 570 printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 571 {
 572         struct printer_dev      *dev = fd->private_data;
 573         unsigned long           flags;
 574         size_t                  size;   /* Amount of data in a TX request. */
 575         size_t                  bytes_copied = 0;
 576         struct usb_request      *req;
 577         int                     value;
 578
 579         DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
 580
 581         if (len == 0)
 582                 return -EINVAL;
 583
 584         mutex_lock(&dev->lock_printer_io);
 585         spin_lock_irqsave(&dev->lock, flags);
 586
 587         if (dev->interface < 0) {
 588                 spin_unlock_irqrestore(&dev->lock, flags);
 589                 mutex_unlock(&dev->lock_printer_io);
 590                 return -ENODEV;
 591         }
 592
 593         /* Check if a printer reset happens while we have interrupts on */
 594         dev->reset_printer = 0;
 595
 596         /* Check if there is any available write buffers */
 597         if (likely(list_empty(&dev->tx_reqs))) {
 598                 /* Turn interrupts back on before sleeping. */
 599                 spin_unlock_irqrestore(&dev->lock, flags);
 600
 601                 /*
 602                  * If write buffers are available check if this is
 603                  * a NON-Blocking call or not.
 604                  */
 605                 if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
 606                         mutex_unlock(&dev->lock_printer_io);
 607                         return -EAGAIN;
 608                 }
 609
 610                 /* Sleep until a write buffer is available */
 611                 wait_event_interruptible(dev->tx_wait,
 612                                 (likely(!list_empty(&dev->tx_reqs))));
 613                 spin_lock_irqsave(&dev->lock, flags);
 614         }
 615
 616         while (likely(!list_empty(&dev->tx_reqs)) && len) {
 617
 618                 if (len > USB_BUFSIZE)
 619                         size = USB_BUFSIZE;
 620                 else
 621                         size = len;
 622
 623                 req = container_of(dev->tx_reqs.next, struct usb_request,
 624                                 list);
 625                 list_del_init(&req->list);
 626
 627                 req->complete = tx_complete;
 628                 req->length = size;
 629
 630                 /* Check if we need to send a zero length packet. */
 631                 if (len > size)
 632                         /* They will be more TX requests so no yet. */
 633                         req->zero = 0;
 634                 else
 635                         /* If the data amount is not a multiple of the
 636                          * maxpacket size then send a zero length packet.
 637                          */
 638                         req->zero = ((len % dev->in_ep->maxpacket) == 0);
 639
 640                 /* Don't leave irqs off while doing memory copies */
 641                 spin_unlock_irqrestore(&dev->lock, flags);
 642
 643                 if (copy_from_user(req->buf, buf, size)) {
 644                         list_add(&req->list, &dev->tx_reqs);
 645                         mutex_unlock(&dev->lock_printer_io);
 646                         return bytes_copied;
 647                 }
 648
 649                 bytes_copied += size;
 650                 len -= size;
 651                 buf += size;
 652
 653                 spin_lock_irqsave(&dev->lock, flags);
 654
 655                 /* We've disconnected or reset so free the req and buffer */
 656                 if (dev->reset_printer) {
 657                         list_add(&req->list, &dev->tx_reqs);
 658                         spin_unlock_irqrestore(&dev->lock, flags);
 659                         mutex_unlock(&dev->lock_printer_io);
 660                         return -EAGAIN;
 661                 }
 662
 663                 list_add(&req->list, &dev->tx_reqs_active);
 664
 665                 /* here, we unlock, and only unlock, to avoid deadlock. */
 666                 spin_unlock(&dev->lock);
 667                 value = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC);
 668                 spin_lock(&dev->lock);
 669                 if (value) {
 670                         list_move(&req->list, &dev->tx_reqs);
 671                         spin_unlock_irqrestore(&dev->lock, flags);
 672                         mutex_unlock(&dev->lock_printer_io);
 673                         return -EAGAIN;
 674                 }
 675         }
 676
 677         spin_unlock_irqrestore(&dev->lock, flags);
 678         mutex_unlock(&dev->lock_printer_io);
 679
 680         DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
 681
 682         if (bytes_copied)
 683                 return bytes_copied;
 684         else
 685                 return -EAGAIN;
 686 }
 687
 688 static int
 689 printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync)
 690 {
 691         struct printer_dev      *dev = fd->private_data;
 692         struct inode *inode = file_inode(fd);
 693         unsigned long           flags;
 694         int                     tx_list_empty;
 695
 696         inode_lock(inode);
 697         spin_lock_irqsave(&dev->lock, flags);
 698
 699         if (dev->interface < 0) {
 700                 spin_unlock_irqrestore(&dev->lock, flags);
 701                 inode_unlock(inode);
 702                 return -ENODEV;
 703         }
 704
 705         tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
 706         spin_unlock_irqrestore(&dev->lock, flags);
 707
 708         if (!tx_list_empty) {
 709                 /* Sleep until all data has been sent */
 710                 wait_event_interruptible(dev->tx_flush_wait,
 711                                 (likely(list_empty(&dev->tx_reqs_active))));
 712         }
 713         inode_unlock(inode);
 714
 715         return 0;
 716 }
 717
 718 static __poll_t
 719 printer_poll(struct file *fd, poll_table *wait)
 720 {
 721         struct printer_dev      *dev = fd->private_data;
 722         unsigned long           flags;
 723         __poll_t                status = 0;
 724
 725         mutex_lock(&dev->lock_printer_io);
 726         spin_lock_irqsave(&dev->lock, flags);
 727
 728         if (dev->interface < 0) {
 729                 spin_unlock_irqrestore(&dev->lock, flags);
 730                 mutex_unlock(&dev->lock_printer_io);
 731                 return EPOLLERR | EPOLLHUP;
 732         }
 733
 734         setup_rx_reqs(dev);
 735         spin_unlock_irqrestore(&dev->lock, flags);
 736         mutex_unlock(&dev->lock_printer_io);
 737
 738         poll_wait(fd, &dev->rx_wait, wait);
 739         poll_wait(fd, &dev->tx_wait, wait);
 740
 741         spin_lock_irqsave(&dev->lock, flags);
 742         if (likely(!list_empty(&dev->tx_reqs)))
 743                 status |= EPOLLOUT | EPOLLWRNORM;
 744
 745         if (likely(dev->current_rx_bytes) ||
 746                         likely(!list_empty(&dev->rx_buffers)))
 747                 status |= EPOLLIN | EPOLLRDNORM;
 748
 749         spin_unlock_irqrestore(&dev->lock, flags);
 750
 751         return status;
 752 }
 753
 754 static long
 755 printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
 756 {
 757         struct printer_dev      *dev = fd->private_data;
 758         unsigned long           flags;
 759         int                     status = 0;
 760
 761         DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg);
 762
 763         /* handle ioctls */
 764
 765         spin_lock_irqsave(&dev->lock, flags);
 766
 767         if (dev->interface < 0) {
 768                 spin_unlock_irqrestore(&dev->lock, flags);
 769                 return -ENODEV;
 770         }
 771
 772         switch (code) {
 773         case GADGET_GET_PRINTER_STATUS:
 774                 status = (int)dev->printer_status;
 775                 break;
 776         case GADGET_SET_PRINTER_STATUS:
 777                 dev->printer_status = (u8)arg;
 778                 break;
 779         default:
 780                 /* could not handle ioctl */
 781                 DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n",
 782                                 code);
 783                 status = -ENOTTY;
 784         }
 785
 786         spin_unlock_irqrestore(&dev->lock, flags);
 787
 788         return status;
 789 }
 790
 791 /* used after endpoint configuration */
 792 static const struct file_operations printer_io_operations = {
 793         .owner =        THIS_MODULE,
 794         .open =         printer_open,
 795         .read =         printer_read,
 796         .write =        printer_write,
 797         .fsync =        printer_fsync,
 798         .poll =         printer_poll,
 799         .unlocked_ioctl = printer_ioctl,
 800         .release =      printer_close,
 801         .llseek =       noop_llseek,
 802 };
 803
 804 /*-------------------------------------------------------------------------*/
 805
 806 static int
 807 set_printer_interface(struct printer_dev *dev)
 808 {
 809         int                     result = 0;
 810
 811         dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc,
 812                                 &ss_ep_in_desc);
 813         dev->in_ep->driver_data = dev;
 814
 815         dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc,
 816                                     &hs_ep_out_desc, &ss_ep_out_desc);
 817         dev->out_ep->driver_data = dev;
 818
 819         result = usb_ep_enable(dev->in_ep);
 820         if (result != 0) {
 821                 DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
 822                 goto done;
 823         }
 824
 825         result = usb_ep_enable(dev->out_ep);
 826         if (result != 0) {
 827                 DBG(dev, "enable %s --> %d\n", dev->out_ep->name, result);
 828                 goto done;
 829         }
 830
 831 done:
 832         /* on error, disable any endpoints  */
 833         if (result != 0) {
 834                 (void) usb_ep_disable(dev->in_ep);
 835                 (void) usb_ep_disable(dev->out_ep);
 836                 dev->in_ep->desc = NULL;
 837                 dev->out_ep->desc = NULL;
 838         }
 839
 840         /* caller is responsible for cleanup on error */
 841         return result;
 842 }
 843
 844 static void printer_reset_interface(struct printer_dev *dev)
 845 {
 846         unsigned long   flags;
 847
 848         if (dev->interface < 0)
 849                 return;
 850
 851         DBG(dev, "%s\n", __func__);
 852
 853         if (dev->in_ep->desc)
 854                 usb_ep_disable(dev->in_ep);
 855
 856         if (dev->out_ep->desc)
 857                 usb_ep_disable(dev->out_ep);
 858
 859         spin_lock_irqsave(&dev->lock, flags);
 860         dev->in_ep->desc = NULL;
 861         dev->out_ep->desc = NULL;
 862         dev->interface = -1;
 863         spin_unlock_irqrestore(&dev->lock, flags);
 864 }
 865
 866 /* Change our operational Interface. */
 867 static int set_interface(struct printer_dev *dev, unsigned number)
 868 {
 869         int                     result = 0;
 870
 871         /* Free the current interface */
 872         printer_reset_interface(dev);
 873
 874         result = set_printer_interface(dev);
 875         if (result)
 876                 printer_reset_interface(dev);
 877         else
 878                 dev->interface = number;
 879
 880         if (!result)
 881                 INFO(dev, "Using interface %x\n", number);
 882
 883         return result;
 884 }
 885
 886 static void printer_soft_reset(struct printer_dev *dev)
 887 {
 888         struct usb_request      *req;
 889
 890         INFO(dev, "Received Printer Reset Request\n");
 891
 892         if (usb_ep_disable(dev->in_ep))
 893                 DBG(dev, "Failed to disable USB in_ep\n");
 894         if (usb_ep_disable(dev->out_ep))
 895                 DBG(dev, "Failed to disable USB out_ep\n");
 896
 897         if (dev->current_rx_req != NULL) {
 898                 list_add(&dev->current_rx_req->list, &dev->rx_reqs);
 899                 dev->current_rx_req = NULL;
 900         }
 901         dev->current_rx_bytes = 0;
 902         dev->current_rx_buf = NULL;
 903         dev->reset_printer = 1;
 904
 905         while (likely(!(list_empty(&dev->rx_buffers)))) {
 906                 req = container_of(dev->rx_buffers.next, struct usb_request,
 907                                 list);
 908                 list_del_init(&req->list);
 909                 list_add(&req->list, &dev->rx_reqs);
 910         }
 911
 912         while (likely(!(list_empty(&dev->rx_reqs_active)))) {
 913                 req = container_of(dev->rx_buffers.next, struct usb_request,
 914                                 list);
 915                 list_del_init(&req->list);
 916                 list_add(&req->list, &dev->rx_reqs);
 917         }
 918
 919         while (likely(!(list_empty(&dev->tx_reqs_active)))) {
 920                 req = container_of(dev->tx_reqs_active.next,
 921                                 struct usb_request, list);
 922                 list_del_init(&req->list);
 923                 list_add(&req->list, &dev->tx_reqs);
 924         }
 925
 926         if (usb_ep_enable(dev->in_ep))
 927                 DBG(dev, "Failed to enable USB in_ep\n");
 928         if (usb_ep_enable(dev->out_ep))
 929                 DBG(dev, "Failed to enable USB out_ep\n");
 930
 931         wake_up_interruptible(&dev->rx_wait);
 932         wake_up_interruptible(&dev->tx_wait);
 933         wake_up_interruptible(&dev->tx_flush_wait);
 934 }
 935
 936 /*-------------------------------------------------------------------------*/
 937
 938 static bool gprinter_req_match(struct usb_function *f,
 939                                const struct usb_ctrlrequest *ctrl,
 940                                bool config0)
 941 {
 942         struct printer_dev      *dev = func_to_printer(f);
 943         u16                     w_index = le16_to_cpu(ctrl->wIndex);
 944         u16                     w_value = le16_to_cpu(ctrl->wValue);
 945         u16                     w_length = le16_to_cpu(ctrl->wLength);
 946
 947         if (config0)
 948                 return false;
 949
 950         if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE ||
 951             (ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS)
 952                 return false;
 953
 954         switch (ctrl->bRequest) {
 955         case GET_DEVICE_ID:
 956                 w_index >>= 8;
 957                 if (USB_DIR_IN & ctrl->bRequestType)
 958                         break;
 959                 return false;
 960         case GET_PORT_STATUS:
 961                 if (!w_value && w_length == 1 &&
 962                     (USB_DIR_IN & ctrl->bRequestType))
 963                         break;
 964                 return false;
 965         case SOFT_RESET:
 966                 if (!w_value && !w_length &&
 967                    !(USB_DIR_IN & ctrl->bRequestType))
 968                         break;
 969                 fallthrough;
 970         default:
 971                 return false;
 972         }
 973         return w_index == dev->interface;
 974 }
 975
 976 /*
 977  * The setup() callback implements all the ep0 functionality that's not
 978  * handled lower down.
 979  */
 980 static int printer_func_setup(struct usb_function *f,
 981                 const struct usb_ctrlrequest *ctrl)
 982 {
 983         struct printer_dev *dev = func_to_printer(f);
 984         struct usb_composite_dev *cdev = f->config->cdev;
 985         struct usb_request      *req = cdev->req;
 986         u8                      *buf = req->buf;
 987         int                     value = -EOPNOTSUPP;
 988         u16                     wIndex = le16_to_cpu(ctrl->wIndex);
 989         u16                     wValue = le16_to_cpu(ctrl->wValue);
 990         u16                     wLength = le16_to_cpu(ctrl->wLength);
 991
 992         DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
 993                 ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
 994
 995         switch (ctrl->bRequestType&USB_TYPE_MASK) {
 996         case USB_TYPE_CLASS:
 997                 switch (ctrl->bRequest) {
 998                 case GET_DEVICE_ID: /* Get the IEEE-1284 PNP String */
 999                         /* Only one printer interface is supported. */
1000                         if ((wIndex>>8) != dev->interface)
1001                                 break;
1002
1003                         if (!dev->pnp_string) {
1004                                 value = 0;
1005                                 break;
1006                         }
1007                         value = strlen(dev->pnp_string);
1008                         buf[0] = (value >> 8) & 0xFF;
1009                         buf[1] = value & 0xFF;
1010                         memcpy(buf + 2, dev->pnp_string, value);
1011                         DBG(dev, "1284 PNP String: %x %s\n", value,
1012                             dev->pnp_string);
1013                         break;
1014
1015                 case GET_PORT_STATUS: /* Get Port Status */
1016                         /* Only one printer interface is supported. */
1017                         if (wIndex != dev->interface)
1018                                 break;
1019
1020                         buf[0] = dev->printer_status;
1021                         value = min_t(u16, wLength, 1);
1022                         break;
1023
1024                 case SOFT_RESET: /* Soft Reset */
1025                         /* Only one printer interface is supported. */
1026                         if (wIndex != dev->interface)
1027                                 break;
1028
1029                         printer_soft_reset(dev);
1030
1031                         value = 0;
1032                         break;
1033
1034                 default:
1035                         goto unknown;
1036                 }
1037                 break;
1038
1039         default:
1040 unknown:
1041                 VDBG(dev,
1042                         "unknown ctrl req%02x.%02x v%04x i%04x l%d\n",
1043                         ctrl->bRequestType, ctrl->bRequest,
1044                         wValue, wIndex, wLength);
1045                 break;
1046         }
1047         /* host either stalls (value < 0) or reports success */
1048         if (value >= 0) {
1049                 req->length = value;
1050                 req->zero = value < wLength;
1051                 value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
1052                 if (value < 0) {
1053                         ERROR(dev, "%s:%d Error!\n", __func__, __LINE__);
1054                         req->status = 0;
1055                 }
1056         }
1057         return value;
1058 }
1059
1060 static int printer_func_bind(struct usb_configuration *c,
1061                 struct usb_function *f)
1062 {
1063         struct usb_gadget *gadget = c->cdev->gadget;
1064         struct printer_dev *dev = func_to_printer(f);
1065         struct device *pdev;
1066         struct usb_composite_dev *cdev = c->cdev;
1067         struct usb_ep *in_ep;
1068         struct usb_ep *out_ep = NULL;
1069         struct usb_request *req;
1070         dev_t devt;
1071         int id;
1072         int ret;
1073         u32 i;
1074
1075         id = usb_interface_id(c, f);
1076         if (id < 0)
1077                 return id;
1078         intf_desc.bInterfaceNumber = id;
1079
1080         /* finish hookup to lower layer ... */
1081         dev->gadget = gadget;
1082
1083         /* all we really need is bulk IN/OUT */
1084         in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
1085         if (!in_ep) {
1086 autoconf_fail:
1087                 dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
1088                         cdev->gadget->name);
1089                 return -ENODEV;
1090         }
1091
1092         out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
1093         if (!out_ep)
1094                 goto autoconf_fail;
1095
1096         /* assumes that all endpoints are dual-speed */
1097         hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
1098         hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
1099         ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
1100         ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
1101
1102         ret = usb_assign_descriptors(f, fs_printer_function,
1103                         hs_printer_function, ss_printer_function,
1104                         ss_printer_function);
1105         if (ret)
1106                 return ret;
1107
1108         dev->in_ep = in_ep;
1109         dev->out_ep = out_ep;
1110
1111         ret = -ENOMEM;
1112         for (i = 0; i < dev->q_len; i++) {
1113                 req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
1114                 if (!req)
1115                         goto fail_tx_reqs;
1116                 list_add(&req->list, &dev->tx_reqs);
1117         }
1118
1119         for (i = 0; i < dev->q_len; i++) {
1120                 req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
1121                 if (!req)
1122                         goto fail_rx_reqs;
1123                 list_add(&req->list, &dev->rx_reqs);
1124         }
1125
1126         /* Setup the sysfs files for the printer gadget. */
1127         devt = MKDEV(major, dev->minor);
1128         pdev = device_create(usb_gadget_class, NULL, devt,
1129                                   NULL, "g_printer%d", dev->minor);
1130         if (IS_ERR(pdev)) {
1131                 ERROR(dev, "Failed to create device: g_printer\n");
1132                 ret = PTR_ERR(pdev);
1133                 goto fail_rx_reqs;
1134         }
1135
1136         /*
1137          * Register a character device as an interface to a user mode
1138          * program that handles the printer specific functionality.
1139          */
1140         cdev_init(&dev->printer_cdev, &printer_io_operations);
1141         dev->printer_cdev.owner = THIS_MODULE;
1142         ret = cdev_add(&dev->printer_cdev, devt, 1);
1143         if (ret) {
1144                 ERROR(dev, "Failed to open char device\n");
1145                 goto fail_cdev_add;
1146         }
1147
1148         return 0;
1149
1150 fail_cdev_add:
1151         device_destroy(usb_gadget_class, devt);
1152
1153 fail_rx_reqs:
1154         while (!list_empty(&dev->rx_reqs)) {
1155                 req = container_of(dev->rx_reqs.next, struct usb_request, list);
1156                 list_del(&req->list);
1157                 printer_req_free(dev->out_ep, req);
1158         }
1159
1160 fail_tx_reqs:
1161         while (!list_empty(&dev->tx_reqs)) {
1162                 req = container_of(dev->tx_reqs.next, struct usb_request, list);
1163                 list_del(&req->list);
1164                 printer_req_free(dev->in_ep, req);
1165         }
1166
1167         usb_free_all_descriptors(f);
1168         return ret;
1169
1170 }
1171
1172 static int printer_func_set_alt(struct usb_function *f,
1173                 unsigned intf, unsigned alt)
1174 {
1175         struct printer_dev *dev = func_to_printer(f);
1176         int ret = -ENOTSUPP;
1177
1178         if (!alt)
1179                 ret = set_interface(dev, intf);
1180
1181         return ret;
1182 }
1183
1184 static void printer_func_disable(struct usb_function *f)
1185 {
1186         struct printer_dev *dev = func_to_printer(f);
1187
1188         DBG(dev, "%s\n", __func__);
1189
1190         printer_reset_interface(dev);
1191 }
1192
1193 static inline struct f_printer_opts
1194 *to_f_printer_opts(struct config_item *item)
1195 {
1196         return container_of(to_config_group(item), struct f_printer_opts,
1197                             func_inst.group);
1198 }
1199
1200 static void printer_attr_release(struct config_item *item)
1201 {
1202         struct f_printer_opts *opts = to_f_printer_opts(item);
1203
1204         usb_put_function_instance(&opts->func_inst);
1205 }
1206
1207 static struct configfs_item_operations printer_item_ops = {
1208         .release        = printer_attr_release,
1209 };
1210
1211 static ssize_t f_printer_opts_pnp_string_show(struct config_item *item,
1212                                               char *page)
1213 {
1214         struct f_printer_opts *opts = to_f_printer_opts(item);
1215         int result = 0;
1216
1217         mutex_lock(&opts->lock);
1218         if (!opts->pnp_string)
1219                 goto unlock;
1220
1221         result = strlcpy(page, opts->pnp_string, PAGE_SIZE);
1222         if (result >= PAGE_SIZE) {
1223                 result = PAGE_SIZE;
1224         } else if (page[result - 1] != '\n' && result + 1 < PAGE_SIZE) {
1225                 page[result++] = '\n';
1226                 page[result] = '\0';
1227         }
1228
1229 unlock:
1230         mutex_unlock(&opts->lock);
1231
1232         return result;
1233 }
1234
1235 static ssize_t f_printer_opts_pnp_string_store(struct config_item *item,
1236                                                const char *page, size_t len)
1237 {
1238         struct f_printer_opts *opts = to_f_printer_opts(item);
1239         char *new_pnp;
1240         int result;
1241
1242         mutex_lock(&opts->lock);
1243
1244         new_pnp = kstrndup(page, len, GFP_KERNEL);
1245         if (!new_pnp) {
1246                 result = -ENOMEM;
1247                 goto unlock;
1248         }
1249
1250         if (opts->pnp_string_allocated)
1251                 kfree(opts->pnp_string);
1252
1253         opts->pnp_string_allocated = true;
1254         opts->pnp_string = new_pnp;
1255         result = len;
1256 unlock:
1257         mutex_unlock(&opts->lock);
1258
1259         return result;
1260 }
1261
1262 CONFIGFS_ATTR(f_printer_opts_, pnp_string);
1263
1264 static ssize_t f_printer_opts_q_len_show(struct config_item *item,
1265                                          char *page)
1266 {
1267         struct f_printer_opts *opts = to_f_printer_opts(item);
1268         int result;
1269
1270         mutex_lock(&opts->lock);
1271         result = sprintf(page, "%d\n", opts->q_len);
1272         mutex_unlock(&opts->lock);
1273
1274         return result;
1275 }
1276
1277 static ssize_t f_printer_opts_q_len_store(struct config_item *item,
1278                                           const char *page, size_t len)
1279 {
1280         struct f_printer_opts *opts = to_f_printer_opts(item);
1281         int ret;
1282         u16 num;
1283
1284         mutex_lock(&opts->lock);
1285         if (opts->refcnt) {
1286                 ret = -EBUSY;
1287                 goto end;
1288         }
1289
1290         ret = kstrtou16(page, 0, &num);
1291         if (ret)
1292                 goto end;
1293
1294         opts->q_len = (unsigned)num;
1295         ret = len;
1296 end:
1297         mutex_unlock(&opts->lock);
1298         return ret;
1299 }
1300
1301 CONFIGFS_ATTR(f_printer_opts_, q_len);
1302
1303 static struct configfs_attribute *printer_attrs[] = {
1304         &f_printer_opts_attr_pnp_string,
1305         &f_printer_opts_attr_q_len,
1306         NULL,
1307 };
1308
1309 static const struct config_item_type printer_func_type = {
1310         .ct_item_ops    = &printer_item_ops,
1311         .ct_attrs       = printer_attrs,
1312         .ct_owner       = THIS_MODULE,
1313 };
1314
1315 static inline int gprinter_get_minor(void)
1316 {
1317         int ret;
1318
1319         ret = ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
1320         if (ret >= PRINTER_MINORS) {
1321                 ida_simple_remove(&printer_ida, ret);
1322                 ret = -ENODEV;
1323         }
1324
1325         return ret;
1326 }
1327
1328 static inline void gprinter_put_minor(int minor)
1329 {
1330         ida_simple_remove(&printer_ida, minor);
1331 }
1332
1333 static int gprinter_setup(int);
1334 static void gprinter_cleanup(void);
1335
1336 static void gprinter_free_inst(struct usb_function_instance *f)
1337 {
1338         struct f_printer_opts *opts;
1339
1340         opts = container_of(f, struct f_printer_opts, func_inst);
1341
1342         mutex_lock(&printer_ida_lock);
1343
1344         gprinter_put_minor(opts->minor);
1345         if (ida_is_empty(&printer_ida))
1346                 gprinter_cleanup();
1347
1348         mutex_unlock(&printer_ida_lock);
1349
1350         if (opts->pnp_string_allocated)
1351                 kfree(opts->pnp_string);
1352         kfree(opts);
1353 }
1354
1355 static struct usb_function_instance *gprinter_alloc_inst(void)
1356 {
1357         struct f_printer_opts *opts;
1358         struct usb_function_instance *ret;
1359         int status = 0;
1360
1361         opts = kzalloc(sizeof(*opts), GFP_KERNEL);
1362         if (!opts)
1363                 return ERR_PTR(-ENOMEM);
1364
1365         mutex_init(&opts->lock);
1366         opts->func_inst.free_func_inst = gprinter_free_inst;
1367         ret = &opts->func_inst;
1368
1369         /* Make sure q_len is initialized, otherwise the bound device can't support read/write! */
1370         opts->q_len = DEFAULT_Q_LEN;
1371
1372         mutex_lock(&printer_ida_lock);
1373
1374         if (ida_is_empty(&printer_ida)) {
1375                 status = gprinter_setup(PRINTER_MINORS);
1376                 if (status) {
1377                         ret = ERR_PTR(status);
1378                         kfree(opts);
1379                         goto unlock;
1380                 }
1381         }
1382
1383         opts->minor = gprinter_get_minor();
1384         if (opts->minor < 0) {
1385                 ret = ERR_PTR(opts->minor);
1386                 kfree(opts);
1387                 if (ida_is_empty(&printer_ida))
1388                         gprinter_cleanup();
1389                 goto unlock;
1390         }
1391         config_group_init_type_name(&opts->func_inst.group, "",
1392                                     &printer_func_type);
1393
1394 unlock:
1395         mutex_unlock(&printer_ida_lock);
1396         return ret;
1397 }
1398
1399 static void gprinter_free(struct usb_function *f)
1400 {
1401         struct printer_dev *dev = func_to_printer(f);
1402         struct f_printer_opts *opts;
1403
1404         opts = container_of(f->fi, struct f_printer_opts, func_inst);
1405
1406         kref_put(&dev->kref, printer_dev_free);
1407         mutex_lock(&opts->lock);
1408         --opts->refcnt;
1409         mutex_unlock(&opts->lock);
1410 }
1411
1412 static void printer_func_unbind(struct usb_configuration *c,
1413                 struct usb_function *f)
1414 {
1415         struct printer_dev      *dev;
1416         struct usb_request      *req;
1417
1418         dev = func_to_printer(f);
1419
1420         device_destroy(usb_gadget_class, MKDEV(major, dev->minor));
1421
1422         /* Remove Character Device */
1423         cdev_del(&dev->printer_cdev);
1424
1425         /* we must already have been disconnected ... no i/o may be active */
1426         WARN_ON(!list_empty(&dev->tx_reqs_active));
1427         WARN_ON(!list_empty(&dev->rx_reqs_active));
1428
1429         /* Free all memory for this driver. */
1430         while (!list_empty(&dev->tx_reqs)) {
1431                 req = container_of(dev->tx_reqs.next, struct usb_request,
1432                                 list);
1433                 list_del(&req->list);
1434                 printer_req_free(dev->in_ep, req);
1435         }
1436
1437         if (dev->current_rx_req != NULL)
1438                 printer_req_free(dev->out_ep, dev->current_rx_req);
1439
1440         while (!list_empty(&dev->rx_reqs)) {
1441                 req = container_of(dev->rx_reqs.next,
1442                                 struct usb_request, list);
1443                 list_del(&req->list);
1444                 printer_req_free(dev->out_ep, req);
1445         }
1446
1447         while (!list_empty(&dev->rx_buffers)) {
1448                 req = container_of(dev->rx_buffers.next,
1449                                 struct usb_request, list);
1450                 list_del(&req->list);
1451                 printer_req_free(dev->out_ep, req);
1452         }
1453         usb_free_all_descriptors(f);
1454 }
1455
1456 static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
1457 {
1458         struct printer_dev      *dev;
1459         struct f_printer_opts   *opts;
1460
1461         opts = container_of(fi, struct f_printer_opts, func_inst);
1462
1463         mutex_lock(&opts->lock);
1464         if (opts->minor >= minors) {
1465                 mutex_unlock(&opts->lock);
1466                 return ERR_PTR(-ENOENT);
1467         }
1468
1469         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1470         if (!dev) {
1471                 mutex_unlock(&opts->lock);
1472                 return ERR_PTR(-ENOMEM);
1473         }
1474
1475         kref_init(&dev->kref);
1476         ++opts->refcnt;
1477         dev->minor = opts->minor;
1478         dev->pnp_string = opts->pnp_string;
1479         dev->q_len = opts->q_len;
1480         mutex_unlock(&opts->lock);
1481
1482         dev->function.name = "printer";
1483         dev->function.bind = printer_func_bind;
1484         dev->function.setup = printer_func_setup;
1485         dev->function.unbind = printer_func_unbind;
1486         dev->function.set_alt = printer_func_set_alt;
1487         dev->function.disable = printer_func_disable;
1488         dev->function.req_match = gprinter_req_match;
1489         dev->function.free_func = gprinter_free;
1490
1491         INIT_LIST_HEAD(&dev->tx_reqs);
1492         INIT_LIST_HEAD(&dev->rx_reqs);
1493         INIT_LIST_HEAD(&dev->rx_buffers);
1494         INIT_LIST_HEAD(&dev->tx_reqs_active);
1495         INIT_LIST_HEAD(&dev->rx_reqs_active);
1496
1497         spin_lock_init(&dev->lock);
1498         mutex_init(&dev->lock_printer_io);
1499         init_waitqueue_head(&dev->rx_wait);
1500         init_waitqueue_head(&dev->tx_wait);
1501         init_waitqueue_head(&dev->tx_flush_wait);
1502
1503         dev->interface = -1;
1504         dev->printer_cdev_open = 0;
1505         dev->printer_status = PRINTER_NOT_ERROR;
1506         dev->current_rx_req = NULL;
1507         dev->current_rx_bytes = 0;
1508         dev->current_rx_buf = NULL;
1509
1510         return &dev->function;
1511 }
1512
1513 DECLARE_USB_FUNCTION_INIT(printer, gprinter_alloc_inst, gprinter_alloc);
1514 MODULE_LICENSE("GPL");
1515 MODULE_AUTHOR("Craig Nadler");
1516
1517 static int gprinter_setup(int count)
1518 {
1519         int status;
1520         dev_t devt;
1521
1522         usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
1523         if (IS_ERR(usb_gadget_class)) {
1524                 status = PTR_ERR(usb_gadget_class);
1525                 usb_gadget_class = NULL;
1526                 pr_err("unable to create usb_gadget class %d\n", status);
1527                 return status;
1528         }
1529
1530         status = alloc_chrdev_region(&devt, 0, count, "USB printer gadget");
1531         if (status) {
1532                 pr_err("alloc_chrdev_region %d\n", status);
1533                 class_destroy(usb_gadget_class);
1534                 usb_gadget_class = NULL;
1535                 return status;
1536         }
1537
1538         major = MAJOR(devt);
1539         minors = count;
1540
1541         return status;
1542 }
1543
1544 static void gprinter_cleanup(void)
1545 {
1546         if (major) {
1547                 unregister_chrdev_region(MKDEV(major, 0), minors);
1548                 major = minors = 0;
1549         }
1550         class_destroy(usb_gadget_class);
1551         usb_gadget_class = NULL;
1552 }