2 * u_ether.c -- Ethernet-over-USB link layer utilities for Gadget stack
4 * Copyright (C) 2003-2005,2008 David Brownell
5 * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
6 * Copyright (C) 2008 Nokia Corporation
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
14 /* #define VERBOSE_DEBUG */
16 #include <linux/kernel.h>
17 #include <linux/module.h>
18 #include <linux/gfp.h>
19 #include <linux/device.h>
20 #include <linux/ctype.h>
21 #include <linux/etherdevice.h>
22 #include <linux/ethtool.h>
23 #include <linux/if_vlan.h>
29 * This component encapsulates the Ethernet link glue needed to provide
30 * one (!) network link through the USB gadget stack, normally "usb0".
32 * The control and data models are handled by the function driver which
33 * connects to this code; such as CDC Ethernet (ECM or EEM),
34 * "CDC Subset", or RNDIS. That includes all descriptor and endpoint
37 * Link level addressing is handled by this component using module
38 * parameters; if no such parameters are provided, random link level
39 * addresses are used. Each end of the link uses one address. The
40 * host end address is exported in various ways, and is often recorded
41 * in configuration databases.
43 * The driver which assembles each configuration using such a link is
44 * responsible for ensuring that each configuration includes at most one
45 * instance of is network link. (The network layer provides ways for
46 * this single "physical" link to be used by multiple virtual links.)
49 #define UETH__VERSION "29-May-2008"
51 /* Experiments show that both Linux and Windows hosts allow up to 16k
52 * frame sizes. Set the max size to 15k+52 to prevent allocating 32k
53 * blocks and still have efficient handling. */
54 #define GETHER_MAX_ETH_FRAME_LEN 15412
56 static struct workqueue_struct *uether_wq;
59 /* lock is held while accessing port_usb
62 struct gether *port_usb;
64 struct net_device *net;
65 struct usb_gadget *gadget;
67 spinlock_t req_lock; /* guard {rx,tx}_reqs */
68 struct list_head tx_reqs, rx_reqs;
70 /* Minimum number of TX USB request queued to UDC */
71 #define TX_REQ_THRESHOLD 5
73 int tx_skb_hold_count;
76 struct sk_buff_head rx_frames;
81 unsigned ul_max_pkts_per_xfer;
82 unsigned dl_max_pkts_per_xfer;
83 struct sk_buff *(*wrap)(struct gether *, struct sk_buff *skb);
84 int (*unwrap)(struct gether *,
86 struct sk_buff_head *list);
88 struct work_struct work;
89 struct work_struct rx_work;
92 #define WORK_RX_MEMORY 0
95 u8 host_mac[ETH_ALEN];
99 /*-------------------------------------------------------------------------*/
101 #define RX_EXTRA 20 /* bytes guarding against rx overflows */
103 #define DEFAULT_QLEN 2 /* double buffering by default */
105 /* for dual-speed hardware, use deeper queues at high/super speed */
106 static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
108 if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH ||
109 gadget->speed == USB_SPEED_SUPER))
110 return qmult * DEFAULT_QLEN;
115 /*-------------------------------------------------------------------------*/
117 /* REVISIT there must be a better way than having two sets
126 #define xprintk(d, level, fmt, args...) \
127 printk(level "%s: " fmt , (d)->net->name , ## args)
131 #define DBG(dev, fmt, args...) \
132 xprintk(dev , KERN_DEBUG , fmt , ## args)
134 #define DBG(dev, fmt, args...) \
141 #define VDBG(dev, fmt, args...) \
145 #define ERROR(dev, fmt, args...) \
146 xprintk(dev , KERN_ERR , fmt , ## args)
147 #define INFO(dev, fmt, args...) \
148 xprintk(dev , KERN_INFO , fmt , ## args)
150 /*-------------------------------------------------------------------------*/
152 /* NETWORK DRIVER HOOKUP (to the layer above this driver) */
154 static int ueth_change_mtu(struct net_device *net, int new_mtu)
156 struct eth_dev *dev = netdev_priv(net);
160 /* don't change MTU on "live" link (peer won't know) */
161 spin_lock_irqsave(&dev->lock, flags);
164 else if (new_mtu <= ETH_HLEN || new_mtu > GETHER_MAX_ETH_FRAME_LEN)
168 spin_unlock_irqrestore(&dev->lock, flags);
173 static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
175 struct eth_dev *dev = netdev_priv(net);
177 strlcpy(p->driver, "g_ether", sizeof(p->driver));
178 strlcpy(p->version, UETH__VERSION, sizeof(p->version));
179 strlcpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version));
180 strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info));
183 /* REVISIT can also support:
184 * - WOL (by tracking suspends and issuing remote wakeup)
185 * - msglevel (implies updated messaging)
186 * - ... probably more ethtool ops
189 static const struct ethtool_ops ops = {
190 .get_drvinfo = eth_get_drvinfo,
191 .get_link = ethtool_op_get_link,
194 static void defer_kevent(struct eth_dev *dev, int flag)
196 if (test_and_set_bit(flag, &dev->todo))
198 if (!schedule_work(&dev->work))
199 ERROR(dev, "kevent %d may have been dropped\n", flag);
201 DBG(dev, "kevent %d scheduled\n", flag);
204 static void rx_complete(struct usb_ep *ep, struct usb_request *req);
207 rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
210 int retval = -ENOMEM;
215 spin_lock_irqsave(&dev->lock, flags);
217 out = dev->port_usb->out_ep;
220 spin_unlock_irqrestore(&dev->lock, flags);
226 /* Padding up to RX_EXTRA handles minor disagreements with host.
227 * Normally we use the USB "terminate on short read" convention;
228 * so allow up to (N*maxpacket), since that memory is normally
229 * already allocated. Some hardware doesn't deal well with short
230 * reads (e.g. DMA must be N*maxpacket), so for now don't trim a
231 * byte off the end (to force hardware errors on overflow).
233 * RNDIS uses internal framing, and explicitly allows senders to
234 * pad to end-of-packet. That's potentially nice for speed, but
235 * means receivers can't recover lost synch on their own (because
236 * new packets don't only start after a short RX).
238 size += sizeof(struct ethhdr) + dev->net->mtu + RX_EXTRA;
239 size += dev->port_usb->header_len;
240 size += out->maxpacket - 1;
241 size -= size % out->maxpacket;
243 if (dev->ul_max_pkts_per_xfer)
244 size *= dev->ul_max_pkts_per_xfer;
246 if (dev->port_usb->is_fixed)
247 size = max_t(size_t, size, dev->port_usb->fixed_out_len);
249 DBG(dev, "%s: size: %zd\n", __func__, size);
250 skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags);
252 DBG(dev, "no rx skb\n");
256 /* Some platforms perform better when IP packets are aligned,
257 * but on at least one, checksumming fails otherwise. Note:
258 * RNDIS headers involve variable numbers of LE32 values.
260 skb_reserve(skb, NET_IP_ALIGN);
262 req->buf = skb->data;
264 req->complete = rx_complete;
267 retval = usb_ep_queue(out, req, gfp_flags);
268 if (retval == -ENOMEM)
270 defer_kevent(dev, WORK_RX_MEMORY);
272 DBG(dev, "rx submit --> %d\n", retval);
274 dev_kfree_skb_any(skb);
279 static void rx_complete(struct usb_ep *ep, struct usb_request *req)
281 struct sk_buff *skb = req->context;
282 struct eth_dev *dev = ep->driver_data;
283 int status = req->status;
288 /* normal completion */
290 skb_put(skb, req->actual);
295 spin_lock_irqsave(&dev->lock, flags);
297 status = dev->unwrap(dev->port_usb,
300 if (status == -EINVAL)
301 dev->net->stats.rx_errors++;
302 else if (status == -EOVERFLOW)
303 dev->net->stats.rx_over_errors++;
305 dev_kfree_skb_any(skb);
308 spin_unlock_irqrestore(&dev->lock, flags);
310 skb_queue_tail(&dev->rx_frames, skb);
316 /* software-driven interface shutdown */
317 case -ECONNRESET: /* unlink */
318 case -ESHUTDOWN: /* disconnect etc */
319 VDBG(dev, "rx shutdown, code %d\n", status);
322 /* for hardware automagic (such as pxa) */
323 case -ECONNABORTED: /* endpoint reset */
324 DBG(dev, "rx %s reset\n", ep->name);
325 defer_kevent(dev, WORK_RX_MEMORY);
327 dev_kfree_skb_any(skb);
332 dev->net->stats.rx_over_errors++;
337 dev_kfree_skb_any(skb);
338 dev->net->stats.rx_errors++;
339 DBG(dev, "rx status %d\n", status);
344 spin_lock(&dev->req_lock);
345 list_add(&req->list, &dev->rx_reqs);
346 spin_unlock(&dev->req_lock);
349 queue_work(uether_wq, &dev->rx_work);
352 static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n)
355 struct usb_request *req;
360 /* queue/recycle up to N requests */
362 list_for_each_entry(req, list, list) {
367 req = usb_ep_alloc_request(ep, GFP_ATOMIC);
369 return list_empty(list) ? -ENOMEM : 0;
370 list_add(&req->list, list);
377 struct list_head *next;
379 next = req->list.next;
380 list_del(&req->list);
381 usb_ep_free_request(ep, req);
386 req = container_of(next, struct usb_request, list);
391 static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n)
395 spin_lock(&dev->req_lock);
396 status = prealloc(&dev->tx_reqs, link->in_ep, n);
399 status = prealloc(&dev->rx_reqs, link->out_ep, n);
404 DBG(dev, "can't alloc requests\n");
406 spin_unlock(&dev->req_lock);
410 static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
412 struct usb_request *req;
416 /* fill unused rxq slots with some skb */
417 spin_lock_irqsave(&dev->req_lock, flags);
418 while (!list_empty(&dev->rx_reqs)) {
419 /* break the nexus of continuous completion and re-submission*/
420 if (++req_cnt > qlen(dev->gadget, dev->qmult))
423 req = container_of(dev->rx_reqs.next,
424 struct usb_request, list);
425 list_del_init(&req->list);
426 spin_unlock_irqrestore(&dev->req_lock, flags);
428 if (rx_submit(dev, req, gfp_flags) < 0) {
429 spin_lock_irqsave(&dev->req_lock, flags);
430 list_add(&req->list, &dev->rx_reqs);
431 spin_unlock_irqrestore(&dev->req_lock, flags);
432 defer_kevent(dev, WORK_RX_MEMORY);
436 spin_lock_irqsave(&dev->req_lock, flags);
438 spin_unlock_irqrestore(&dev->req_lock, flags);
441 static void process_rx_w(struct work_struct *work)
443 struct eth_dev *dev = container_of(work, struct eth_dev, rx_work);
450 while ((skb = skb_dequeue(&dev->rx_frames))) {
452 || ETH_HLEN > skb->len
453 || skb->len > ETH_FRAME_LEN) {
454 dev->net->stats.rx_errors++;
455 dev->net->stats.rx_length_errors++;
456 DBG(dev, "rx length %d\n", skb->len);
457 dev_kfree_skb_any(skb);
460 skb->protocol = eth_type_trans(skb, dev->net);
461 dev->net->stats.rx_packets++;
462 dev->net->stats.rx_bytes += skb->len;
464 status = netif_rx_ni(skb);
467 if (netif_running(dev->net))
468 rx_fill(dev, GFP_KERNEL);
471 static void eth_work(struct work_struct *work)
473 struct eth_dev *dev = container_of(work, struct eth_dev, work);
475 if (test_and_clear_bit(WORK_RX_MEMORY, &dev->todo)) {
476 if (netif_running(dev->net))
477 rx_fill(dev, GFP_KERNEL);
481 DBG(dev, "work done, flags = 0x%lx\n", dev->todo);
484 static void tx_complete(struct usb_ep *ep, struct usb_request *req)
486 struct sk_buff *skb = req->context;
487 struct eth_dev *dev = ep->driver_data;
488 struct net_device *net = dev->net;
489 struct usb_request *new_req;
494 switch (req->status) {
496 dev->net->stats.tx_errors++;
497 VDBG(dev, "tx err %d\n", req->status);
499 case -ECONNRESET: /* unlink */
500 case -ESHUTDOWN: /* disconnect etc */
504 dev->net->stats.tx_bytes += req->length-1;
506 dev->net->stats.tx_bytes += req->length;
508 dev->net->stats.tx_packets++;
510 spin_lock(&dev->req_lock);
511 list_add_tail(&req->list, &dev->tx_reqs);
513 if (dev->port_usb->multi_pkt_xfer) {
514 dev->no_tx_req_used--;
516 in = dev->port_usb->in_ep;
518 if (!list_empty(&dev->tx_reqs)) {
519 new_req = container_of(dev->tx_reqs.next,
520 struct usb_request, list);
521 list_del(&new_req->list);
522 spin_unlock(&dev->req_lock);
523 if (new_req->length > 0) {
524 length = new_req->length;
526 /* NCM requires no zlp if transfer is
528 if (dev->port_usb->is_fixed &&
529 length == dev->port_usb->fixed_in_len &&
530 (length % in->maxpacket) == 0)
535 /* use zlp framing on tx for strict CDC-Ether
536 * conformance, though any robust network rx
537 * path ignores extra padding. and some hardware
538 * doesn't like to write zlps.
540 if (new_req->zero && !dev->zlp &&
541 (length % in->maxpacket) == 0) {
546 new_req->length = length;
547 retval = usb_ep_queue(in, new_req, GFP_ATOMIC);
550 DBG(dev, "tx queue err %d\n", retval);
553 spin_lock(&dev->req_lock);
554 dev->no_tx_req_used++;
555 spin_unlock(&dev->req_lock);
556 net->trans_start = jiffies;
559 spin_lock(&dev->req_lock);
560 list_add(&new_req->list, &dev->tx_reqs);
561 spin_unlock(&dev->req_lock);
564 spin_unlock(&dev->req_lock);
567 spin_unlock(&dev->req_lock);
568 dev_kfree_skb_any(skb);
571 atomic_dec(&dev->tx_qlen);
572 if (netif_carrier_ok(dev->net))
573 netif_wake_queue(dev->net);
576 static inline int is_promisc(u16 cdc_filter)
578 return cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
581 static void alloc_tx_buffer(struct eth_dev *dev)
583 struct list_head *act;
584 struct usb_request *req;
586 dev->tx_req_bufsize = (dev->dl_max_pkts_per_xfer *
588 + sizeof(struct ethhdr)
589 /* size of rndis_packet_msg_type */
593 list_for_each(act, &dev->tx_reqs) {
594 req = container_of(act, struct usb_request, list);
596 req->buf = kmalloc(dev->tx_req_bufsize,
601 static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
602 struct net_device *net)
604 struct eth_dev *dev = netdev_priv(net);
607 struct usb_request *req = NULL;
612 spin_lock_irqsave(&dev->lock, flags);
614 in = dev->port_usb->in_ep;
615 cdc_filter = dev->port_usb->cdc_filter;
620 spin_unlock_irqrestore(&dev->lock, flags);
623 dev_kfree_skb_any(skb);
627 /* Allocate memory for tx_reqs to support multi packet transfer */
628 if (dev->port_usb->multi_pkt_xfer && !dev->tx_req_bufsize)
629 alloc_tx_buffer(dev);
631 /* apply outgoing CDC or RNDIS filters */
632 if (skb && !is_promisc(cdc_filter)) {
633 u8 *dest = skb->data;
635 if (is_multicast_ether_addr(dest)) {
638 /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
639 * SET_ETHERNET_MULTICAST_FILTERS requests
641 if (is_broadcast_ether_addr(dest))
642 type = USB_CDC_PACKET_TYPE_BROADCAST;
644 type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
645 if (!(cdc_filter & type)) {
646 dev_kfree_skb_any(skb);
650 /* ignores USB_CDC_PACKET_TYPE_DIRECTED */
653 spin_lock_irqsave(&dev->req_lock, flags);
655 * this freelist can be empty if an interrupt triggered disconnect()
656 * and reconfigured the gadget (shutting down this queue) after the
657 * network stack decided to xmit but before we got the spinlock.
659 if (list_empty(&dev->tx_reqs)) {
660 spin_unlock_irqrestore(&dev->req_lock, flags);
661 return NETDEV_TX_BUSY;
664 req = container_of(dev->tx_reqs.next, struct usb_request, list);
665 list_del(&req->list);
667 /* temporarily stop TX queue when the freelist empties */
668 if (list_empty(&dev->tx_reqs))
669 netif_stop_queue(net);
670 spin_unlock_irqrestore(&dev->req_lock, flags);
672 /* no buffer copies needed, unless the network stack did it
673 * or the hardware can't use skb buffers.
674 * or there's not enough space for extra headers we need
679 spin_lock_irqsave(&dev->lock, flags);
681 skb = dev->wrap(dev->port_usb, skb);
682 spin_unlock_irqrestore(&dev->lock, flags);
684 /* Multi frame CDC protocols may store the frame for
685 * later which is not a dropped frame.
687 if (dev->port_usb->supports_multi_frame)
693 spin_lock_irqsave(&dev->req_lock, flags);
694 dev->tx_skb_hold_count++;
695 spin_unlock_irqrestore(&dev->req_lock, flags);
697 if (dev->port_usb->multi_pkt_xfer) {
698 memcpy(req->buf + req->length, skb->data, skb->len);
699 req->length = req->length + skb->len;
700 length = req->length;
701 dev_kfree_skb_any(skb);
703 spin_lock_irqsave(&dev->req_lock, flags);
704 if (dev->tx_skb_hold_count < dev->dl_max_pkts_per_xfer) {
705 if (dev->no_tx_req_used > TX_REQ_THRESHOLD) {
706 list_add(&req->list, &dev->tx_reqs);
707 spin_unlock_irqrestore(&dev->req_lock, flags);
712 dev->no_tx_req_used++;
713 spin_unlock_irqrestore(&dev->req_lock, flags);
715 spin_lock_irqsave(&dev->lock, flags);
716 dev->tx_skb_hold_count = 0;
717 spin_unlock_irqrestore(&dev->lock, flags);
720 req->buf = skb->data;
724 req->complete = tx_complete;
726 /* NCM requires no zlp if transfer is dwNtbInMaxSize */
727 if (dev->port_usb->is_fixed &&
728 length == dev->port_usb->fixed_in_len &&
729 (length % in->maxpacket) == 0)
734 /* use zlp framing on tx for strict CDC-Ether conformance,
735 * though any robust network rx path ignores extra padding.
736 * and some hardware doesn't like to write zlps.
738 if (req->zero && !dev->zlp && (length % in->maxpacket) == 0) {
743 req->length = length;
745 /* throttle high/super speed IRQ rate back slightly */
746 if (gadget_is_dualspeed(dev->gadget))
747 req->no_interrupt = (((dev->gadget->speed == USB_SPEED_HIGH ||
748 dev->gadget->speed == USB_SPEED_SUPER)) &&
749 !list_empty(&dev->tx_reqs))
750 ? ((atomic_read(&dev->tx_qlen) % dev->qmult) != 0)
753 retval = usb_ep_queue(in, req, GFP_ATOMIC);
756 DBG(dev, "tx queue err %d\n", retval);
759 net->trans_start = jiffies;
760 atomic_inc(&dev->tx_qlen);
764 if (!dev->port_usb->multi_pkt_xfer)
765 dev_kfree_skb_any(skb);
767 dev->net->stats.tx_dropped++;
769 spin_lock_irqsave(&dev->req_lock, flags);
770 if (list_empty(&dev->tx_reqs))
771 netif_start_queue(net);
772 list_add(&req->list, &dev->tx_reqs);
773 spin_unlock_irqrestore(&dev->req_lock, flags);
779 /*-------------------------------------------------------------------------*/
781 static void eth_start(struct eth_dev *dev, gfp_t gfp_flags)
783 DBG(dev, "%s\n", __func__);
785 /* fill the rx queue */
786 rx_fill(dev, gfp_flags);
788 /* and open the tx floodgates */
789 atomic_set(&dev->tx_qlen, 0);
790 netif_wake_queue(dev->net);
793 static int eth_open(struct net_device *net)
795 struct eth_dev *dev = netdev_priv(net);
798 DBG(dev, "%s\n", __func__);
799 if (netif_carrier_ok(dev->net))
800 eth_start(dev, GFP_KERNEL);
802 spin_lock_irq(&dev->lock);
803 link = dev->port_usb;
804 if (link && link->open)
806 spin_unlock_irq(&dev->lock);
811 static int eth_stop(struct net_device *net)
813 struct eth_dev *dev = netdev_priv(net);
816 VDBG(dev, "%s\n", __func__);
817 netif_stop_queue(net);
819 DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
820 dev->net->stats.rx_packets, dev->net->stats.tx_packets,
821 dev->net->stats.rx_errors, dev->net->stats.tx_errors
824 /* ensure there are no more active requests */
825 spin_lock_irqsave(&dev->lock, flags);
827 struct gether *link = dev->port_usb;
828 const struct usb_endpoint_descriptor *in;
829 const struct usb_endpoint_descriptor *out;
834 /* NOTE: we have no abort-queue primitive we could use
835 * to cancel all pending I/O. Instead, we disable then
836 * reenable the endpoints ... this idiom may leave toggle
837 * wrong, but that's a self-correcting error.
839 * REVISIT: we *COULD* just let the transfers complete at
840 * their own pace; the network stack can handle old packets.
841 * For the moment we leave this here, since it works.
843 in = link->in_ep->desc;
844 out = link->out_ep->desc;
845 usb_ep_disable(link->in_ep);
846 usb_ep_disable(link->out_ep);
847 if (netif_carrier_ok(net)) {
848 DBG(dev, "host still using in/out endpoints\n");
849 link->in_ep->desc = in;
850 link->out_ep->desc = out;
851 usb_ep_enable(link->in_ep);
852 usb_ep_enable(link->out_ep);
855 spin_unlock_irqrestore(&dev->lock, flags);
860 /*-------------------------------------------------------------------------*/
862 static int get_ether_addr(const char *str, u8 *dev_addr)
867 for (i = 0; i < 6; i++) {
870 if ((*str == '.') || (*str == ':'))
872 num = hex_to_bin(*str++) << 4;
873 num |= hex_to_bin(*str++);
876 if (is_valid_ether_addr(dev_addr))
879 eth_random_addr(dev_addr);
883 static int get_ether_addr_str(u8 dev_addr[ETH_ALEN], char *str, int len)
888 snprintf(str, len, "%pM", dev_addr);
892 static const struct net_device_ops eth_netdev_ops = {
893 .ndo_open = eth_open,
894 .ndo_stop = eth_stop,
895 .ndo_start_xmit = eth_start_xmit,
896 .ndo_change_mtu = ueth_change_mtu,
897 .ndo_set_mac_address = eth_mac_addr,
898 .ndo_validate_addr = eth_validate_addr,
901 static struct device_type gadget_type = {
906 * gether_setup_name - initialize one ethernet-over-usb link
907 * @g: gadget to associated with these links
908 * @ethaddr: NULL, or a buffer in which the ethernet address of the
909 * host side of the link is recorded
910 * @netname: name for network device (for example, "usb")
913 * This sets up the single network link that may be exported by a
914 * gadget driver using this framework. The link layer addresses are
915 * set up using module parameters.
917 * Returns an eth_dev pointer on success, or an ERR_PTR on failure.
919 struct eth_dev *gether_setup_name(struct usb_gadget *g,
920 const char *dev_addr, const char *host_addr,
921 u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname)
924 struct net_device *net;
927 net = alloc_etherdev(sizeof *dev);
929 return ERR_PTR(-ENOMEM);
931 dev = netdev_priv(net);
932 spin_lock_init(&dev->lock);
933 spin_lock_init(&dev->req_lock);
934 INIT_WORK(&dev->work, eth_work);
935 INIT_WORK(&dev->rx_work, process_rx_w);
936 INIT_LIST_HEAD(&dev->tx_reqs);
937 INIT_LIST_HEAD(&dev->rx_reqs);
939 skb_queue_head_init(&dev->rx_frames);
941 /* network device setup */
944 snprintf(net->name, sizeof(net->name), "%s%%d", netname);
946 if (get_ether_addr(dev_addr, net->dev_addr))
948 "using random %s ethernet address\n", "self");
949 if (get_ether_addr(host_addr, dev->host_mac))
951 "using random %s ethernet address\n", "host");
954 memcpy(ethaddr, dev->host_mac, ETH_ALEN);
956 net->netdev_ops = ð_netdev_ops;
958 net->ethtool_ops = &ops;
961 SET_NETDEV_DEV(net, &g->dev);
962 SET_NETDEV_DEVTYPE(net, &gadget_type);
964 status = register_netdev(net);
966 dev_dbg(&g->dev, "register_netdev failed, %d\n", status);
968 dev = ERR_PTR(status);
970 INFO(dev, "MAC %pM\n", net->dev_addr);
971 INFO(dev, "HOST MAC %pM\n", dev->host_mac);
974 * two kinds of host-initiated state changes:
975 * - iff DATA transfer is active, carrier is "on"
976 * - tx queueing enabled if open *and* carrier is "on"
978 netif_carrier_off(net);
983 EXPORT_SYMBOL_GPL(gether_setup_name);
985 struct net_device *gether_setup_name_default(const char *netname)
987 struct net_device *net;
990 net = alloc_etherdev(sizeof(*dev));
992 return ERR_PTR(-ENOMEM);
994 dev = netdev_priv(net);
995 spin_lock_init(&dev->lock);
996 spin_lock_init(&dev->req_lock);
997 INIT_WORK(&dev->work, eth_work);
998 INIT_WORK(&dev->rx_work, process_rx_w);
999 INIT_LIST_HEAD(&dev->tx_reqs);
1000 INIT_LIST_HEAD(&dev->rx_reqs);
1002 skb_queue_head_init(&dev->rx_frames);
1004 /* network device setup */
1006 dev->qmult = QMULT_DEFAULT;
1007 snprintf(net->name, sizeof(net->name), "%s%%d", netname);
1009 eth_random_addr(dev->dev_mac);
1010 pr_warn("using random %s ethernet address\n", "self");
1011 eth_random_addr(dev->host_mac);
1012 pr_warn("using random %s ethernet address\n", "host");
1014 net->netdev_ops = ð_netdev_ops;
1016 net->ethtool_ops = &ops;
1017 SET_NETDEV_DEVTYPE(net, &gadget_type);
1021 EXPORT_SYMBOL_GPL(gether_setup_name_default);
1023 int gether_register_netdev(struct net_device *net)
1025 struct eth_dev *dev;
1026 struct usb_gadget *g;
1030 if (!net->dev.parent)
1032 dev = netdev_priv(net);
1034 status = register_netdev(net);
1036 dev_dbg(&g->dev, "register_netdev failed, %d\n", status);
1039 INFO(dev, "HOST MAC %pM\n", dev->host_mac);
1041 /* two kinds of host-initiated state changes:
1042 * - iff DATA transfer is active, carrier is "on"
1043 * - tx queueing enabled if open *and* carrier is "on"
1045 netif_carrier_off(net);
1047 sa.sa_family = net->type;
1048 memcpy(sa.sa_data, dev->dev_mac, ETH_ALEN);
1050 status = dev_set_mac_address(net, &sa);
1053 pr_warn("cannot set self ethernet address: %d\n", status);
1055 INFO(dev, "MAC %pM\n", dev->dev_mac);
1059 EXPORT_SYMBOL_GPL(gether_register_netdev);
1061 void gether_set_gadget(struct net_device *net, struct usb_gadget *g)
1063 struct eth_dev *dev;
1065 dev = netdev_priv(net);
1067 SET_NETDEV_DEV(net, &g->dev);
1069 EXPORT_SYMBOL_GPL(gether_set_gadget);
1071 int gether_set_dev_addr(struct net_device *net, const char *dev_addr)
1073 struct eth_dev *dev;
1074 u8 new_addr[ETH_ALEN];
1079 dev = netdev_priv(net);
1080 if (get_ether_addr(dev_addr, new_addr))
1082 memcpy(dev->dev_mac, new_addr, ETH_ALEN);
1085 EXPORT_SYMBOL_GPL(gether_set_dev_addr);
1087 int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len)
1089 struct eth_dev *dev;
1094 dev = netdev_priv(net);
1095 return get_ether_addr_str(dev->dev_mac, dev_addr, len);
1097 EXPORT_SYMBOL_GPL(gether_get_dev_addr);
1099 int gether_set_host_addr(struct net_device *net, const char *host_addr)
1101 struct eth_dev *dev;
1102 u8 new_addr[ETH_ALEN];
1107 dev = netdev_priv(net);
1108 if (get_ether_addr(host_addr, new_addr))
1110 memcpy(dev->host_mac, new_addr, ETH_ALEN);
1113 EXPORT_SYMBOL_GPL(gether_set_host_addr);
1115 int gether_get_host_addr(struct net_device *net, char *host_addr, int len)
1117 struct eth_dev *dev;
1122 dev = netdev_priv(net);
1123 return get_ether_addr_str(dev->host_mac, host_addr, len);
1125 EXPORT_SYMBOL_GPL(gether_get_host_addr);
1127 int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len)
1129 struct eth_dev *dev;
1134 dev = netdev_priv(net);
1135 snprintf(host_addr, len, "%pm", dev->host_mac);
1137 return strlen(host_addr);
1139 EXPORT_SYMBOL_GPL(gether_get_host_addr_cdc);
1141 void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN])
1143 struct eth_dev *dev;
1145 dev = netdev_priv(net);
1146 memcpy(host_mac, dev->host_mac, ETH_ALEN);
1148 EXPORT_SYMBOL_GPL(gether_get_host_addr_u8);
1150 void gether_set_qmult(struct net_device *net, unsigned qmult)
1152 struct eth_dev *dev;
1157 dev = netdev_priv(net);
1160 EXPORT_SYMBOL_GPL(gether_set_qmult);
1162 unsigned gether_get_qmult(struct net_device *net)
1164 struct eth_dev *dev;
1169 dev = netdev_priv(net);
1172 EXPORT_SYMBOL_GPL(gether_get_qmult);
1174 int gether_get_ifname(struct net_device *net, char *name, int len)
1180 strlcpy(name, netdev_name(net), len);
1182 return strlen(name);
1184 EXPORT_SYMBOL_GPL(gether_get_ifname);
1187 * gether_cleanup - remove Ethernet-over-USB device
1188 * Context: may sleep
1190 * This is called to free all resources allocated by @gether_setup().
1192 void gether_cleanup(struct eth_dev *dev)
1197 unregister_netdev(dev->net);
1198 flush_work(&dev->work);
1199 free_netdev(dev->net);
1201 EXPORT_SYMBOL_GPL(gether_cleanup);
1204 * gether_connect - notify network layer that USB link is active
1205 * @link: the USB link, set up with endpoints, descriptors matching
1206 * current device speed, and any framing wrapper(s) set up.
1207 * Context: irqs blocked
1209 * This is called to activate endpoints and let the network layer know
1210 * the connection is active ("carrier detect"). It may cause the I/O
1211 * queues to open and start letting network packets flow, but will in
1212 * any case activate the endpoints so that they respond properly to the
1215 * Verify net_device pointer returned using IS_ERR(). If it doesn't
1216 * indicate some error code (negative errno), ep->driver_data values
1217 * have been overwritten.
1219 struct net_device *gether_connect(struct gether *link)
1221 struct eth_dev *dev = link->ioport;
1225 return ERR_PTR(-EINVAL);
1227 link->in_ep->driver_data = dev;
1228 result = usb_ep_enable(link->in_ep);
1230 DBG(dev, "enable %s --> %d\n",
1231 link->in_ep->name, result);
1235 link->out_ep->driver_data = dev;
1236 result = usb_ep_enable(link->out_ep);
1238 DBG(dev, "enable %s --> %d\n",
1239 link->out_ep->name, result);
1244 result = alloc_requests(dev, link, qlen(dev->gadget,
1248 dev->zlp = link->is_zlp_ok;
1249 DBG(dev, "qlen %d\n", qlen(dev->gadget, dev->qmult));
1251 dev->header_len = link->header_len;
1252 dev->unwrap = link->unwrap;
1253 dev->wrap = link->wrap;
1254 dev->ul_max_pkts_per_xfer = link->ul_max_pkts_per_xfer;
1255 dev->dl_max_pkts_per_xfer = link->dl_max_pkts_per_xfer;
1257 spin_lock(&dev->lock);
1258 dev->tx_skb_hold_count = 0;
1259 dev->no_tx_req_used = 0;
1260 dev->tx_req_bufsize = 0;
1261 dev->port_usb = link;
1262 if (netif_running(dev->net)) {
1269 spin_unlock(&dev->lock);
1271 netif_carrier_on(dev->net);
1272 if (netif_running(dev->net))
1273 eth_start(dev, GFP_ATOMIC);
1275 /* on error, disable any endpoints */
1277 (void) usb_ep_disable(link->out_ep);
1279 (void) usb_ep_disable(link->in_ep);
1282 /* caller is responsible for cleanup on error */
1284 return ERR_PTR(result);
1287 EXPORT_SYMBOL_GPL(gether_connect);
1290 * gether_disconnect - notify network layer that USB link is inactive
1291 * @link: the USB link, on which gether_connect() was called
1292 * Context: irqs blocked
1294 * This is called to deactivate endpoints and let the network layer know
1295 * the connection went inactive ("no carrier").
1297 * On return, the state is as if gether_connect() had never been called.
1298 * The endpoints are inactive, and accordingly without active USB I/O.
1299 * Pointers to endpoint descriptors and endpoint private data are nulled.
1301 void gether_disconnect(struct gether *link)
1303 struct eth_dev *dev = link->ioport;
1304 struct usb_request *req;
1305 struct sk_buff *skb;
1311 DBG(dev, "%s\n", __func__);
1313 netif_stop_queue(dev->net);
1314 netif_carrier_off(dev->net);
1316 /* disable endpoints, forcing (synchronous) completion
1317 * of all pending i/o. then free the request objects
1318 * and forget about the endpoints.
1320 usb_ep_disable(link->in_ep);
1321 spin_lock(&dev->req_lock);
1322 while (!list_empty(&dev->tx_reqs)) {
1323 req = container_of(dev->tx_reqs.next,
1324 struct usb_request, list);
1325 list_del(&req->list);
1327 spin_unlock(&dev->req_lock);
1328 if (link->multi_pkt_xfer)
1330 usb_ep_free_request(link->in_ep, req);
1331 spin_lock(&dev->req_lock);
1333 spin_unlock(&dev->req_lock);
1334 link->in_ep->desc = NULL;
1336 usb_ep_disable(link->out_ep);
1337 spin_lock(&dev->req_lock);
1338 while (!list_empty(&dev->rx_reqs)) {
1339 req = container_of(dev->rx_reqs.next,
1340 struct usb_request, list);
1341 list_del(&req->list);
1343 spin_unlock(&dev->req_lock);
1344 usb_ep_free_request(link->out_ep, req);
1345 spin_lock(&dev->req_lock);
1347 spin_unlock(&dev->req_lock);
1349 spin_lock(&dev->rx_frames.lock);
1350 while ((skb = __skb_dequeue(&dev->rx_frames)))
1351 dev_kfree_skb_any(skb);
1352 spin_unlock(&dev->rx_frames.lock);
1354 link->out_ep->desc = NULL;
1356 /* finish forgetting about this USB link episode */
1357 dev->header_len = 0;
1361 spin_lock(&dev->lock);
1362 dev->port_usb = NULL;
1363 spin_unlock(&dev->lock);
1365 EXPORT_SYMBOL_GPL(gether_disconnect);
1367 static int __init gether_init(void)
1369 uether_wq = create_singlethread_workqueue("uether");
1371 pr_err("%s: Unable to create workqueue: uether\n", __func__);
1376 module_init(gether_init);
1378 static void __exit gether_exit(void)
1380 destroy_workqueue(uether_wq);
1383 module_exit(gether_exit);
1384 MODULE_AUTHOR("David Brownell");
1385 MODULE_DESCRIPTION("ethernet over USB driver");
1386 MODULE_LICENSE("GPL v2");