1 2009-10-19 Don Lee <don.lee@sunplusct.com>
3 * score-tdep.c: Delete dead codes.
5 2009-10-15 Michael Snyder <msnyder@vmware.com>
7 * record.c (struct record_reg_entry): Replace ptr with union
9 (struct record_mem_entry): Ditto.
10 (record_reg_alloc): Don't alloc ptr if reg will fit into buf.
11 (record_mem_alloc): Ditto.
12 (record_reg_release): Don't free ptr if reg was stored in buf.
13 (record_mem_release): Ditto.
14 (record_get_loc): New function. Return a pointer to where the
15 value (mem or reg) is to be stored.
16 (record_arch_list_add_reg): Call record_get_loc instead of using ptr.
17 (record_arch_list_add_mem): Ditto.
20 2009-10-16 Michael Eager <eager@eagercon.com>
22 * microblaze-linux-tdep.c:
23 microblaze_linux_memory_remove_breakpoint(): Add gdbarch to param,
24 replace frame_pc_unwind with get_frame_address_in_block.
25 * microblaze-tdep.c: Remove MICROBLAZE_REGISTER_SIZE.
26 * microblaze-tdep.h: Add MICROBLAZE_REGISTER_SIZE.
28 2008-10-15 Steven G. Kargl <kargl@gcc.gnu.org> (tiny patch)
30 * amd64fbsd-nat.c (amd64fbsd_supply_pcb): Conditionally compile in
31 support for pcb->pcb_{fs,ds,es,gs} on FreeBSD older than 8.0.
33 2009-10-15 Michael Eager <eager@eagercon.com>
35 * config/djgpp/fnchange.lst: Add translations for cpu-microblaze.c,
36 elf32-microblaze.c, microblaze-rom.c, microblaze-linux-tdep.c,
37 microblaze-tdep.h, microblaze-tdep.c, microblaze-opc.h,
38 microblaze-opcm.h, microblaze-dis.c, microblaze-dis.h, sim/microblaze,
39 microblaze.h, and microblaze.isa.
40 * configure.tgt: Add targets microblaze*-linux-*, microblaze*-xilinx-*.
41 * Makefile.in: Build microblaze-tdep.o, microblaze-linux-tdep.o.
42 HFILES_NO_SRCDIR: Add microblaze-tdep.h.
43 * microblaze-linux-tdep.c: New.
44 * microblaze-tdep.c: New.
45 * microblaze-tdep.h: New.
46 * NEWS: Announce Xilinx MicroBlaze support.
48 2009-10-15 Paul Pluzhnikov <ppluzhnikov@google.com>
51 * linux-nat.c (linux_nat_post_attach_wait): Adjust assert.
52 (lin_lwp_attach_lwp, linux_nat_attach): Handle disappearing LWP.
54 2009-10-15 Michael Snyder <msnyder@vmware.com>
56 * record.c (record_insn_max_num): Make unsigned.
57 (_initialize_record): Use uinteger instead of zinteger for
58 set command, so that it will report "unlimited" for zero.
60 2009-10-15 Michael Snyder <msnyder@vmware.com>
62 * record.c (record_reg_alloc): New function.
63 (record_reg_release): New function.
64 (record_mem_alloc): New function.
65 (record_mem_release): New function.
66 (record_end_alloc): New function.
67 (record_end_release): New function.
68 (record_entry_release): New function.
69 (record_list_release): Simplify, call record_entry_release.
70 (record_list_release_next): Rename to record_list_release_following.
71 Simplify and call record_entry_release.
72 (record_list_release_first): Simplify, comment, and use
74 (record_arch_list_add_reg): Simplify, call record_reg_alloc.
75 (record_arch_list_add_mem): Simplify, call record_mem_alloc.
76 (record_arch_list_add_end): Simplify, call record_end_alloc.
78 2009-10-14 Michael Snyder <msnyder@vmware.com>
80 * record.c (record_list_release_first): Do not decrement
82 (set_insn_num_max): Remove printf.
83 Decrement record_insn_num in the loop.
85 2009-10-14 Cary Coutant <ccoutant@google.com>
87 * dwarf2read.c (read_import_statement): Call follow_die_ref_or_sig.
89 2009-10-14 Keith Seitz <keiths@redhat.com>
91 * dwarf2read.c (dwarf2_const_value): Fix order of arguments to
92 store_unsigned_integer.
94 2009-10-14 Pedro Alves <pedro@codesourcery.com>
96 * configure.ac (build_warnings): Add -Wunused-value.
97 * configure: Regenerate.
99 2009-10-14 Tristan Gingold <gingold@adacore.com>
101 * solib-darwin.c: Remove trailing whitespaces.
102 (darwin_dyld_version_ok): Fix typo.
104 2009-10-14 Andrew Stubbs <ams@codesourcery.com>
106 * sh-tdep.c (sh_gdbarch_init): Add show_regs settings for
107 bfd_mach_sh3_nommu, bfd_mach_sh2a_nofpu_or_sh3_nommu,
108 bfd_mach_sh2a_or_sh3e, bfd_mach_sh2a_or_sh4, bfd_mach_sh4_nommu_nofpu,
109 and bfd_mach_sh2a_nofpu_or_sh4_nommu_nofpu.
110 Move bfd_mach_sh2a_or_sh4 to use the same configuration as
113 2009-10-13 Daniel Jacobowitz <dan@codesourcery.com>
115 * arm-tdep.c (arm_push_dummy_call): Set the low bit of LR for
117 (thumb_get_next_pc): Handle Thumb-2 and ARM v6 instructions. Refuse
118 to single step into IT blocks.
120 2009-10-13 Pedro Alves <pedro@codesourcery.com>
122 * infcall.c (call_function_by_hand): Formatting.
124 2009-10-13 Tristan Gingold <gingold@adacore.com>
126 * solib-darwin.c: Add an empty line after comment for functions.
127 (struct gdb_dyld_all_image_infos): Improve comment.
128 (DYLD_VERSION): Removed and replaced by ...
129 (DYLD_VERSION_MAX, DYLD_VERSION_MIN): ... New macros.
130 (darwin_dyld_version_ok): New function.
131 (darwin_load_image_infos): Call darwin_dyld_version_ok.
132 (darwin_current_sos): Ditto.
133 (darwin_solib_create_inferior_hook): Ditto.
135 2009-10-13 Tristan Gingold <gingold@adacore.com>
137 * machoread.c: Add an empty line after comment for functions.
138 (oso_el_compare_name): New function.
139 (macho_add_oso_symfile): New function.
140 (macho_oso_symfile): Use macho_add_oso_symfile. Sort the oso
141 and optimize accesses to libraries.
143 2009-10-13 Tristan Gingold <gingold@adacore.com>
145 * objfiles.c (objfile_has_symbols): New function.
146 * objfiles.h (objfile_has_symbols): Add prototype.
147 * symfile.c (symbol_file_add_with_addrs_or_offsets): Call
149 (reread_symbols): Ditto.
151 2009-10-12 Jiang Jilin <freephp@gmail.com>
153 * i386-tdep.c (i386_process_record): Add xgetbv/xsetbv
154 instructions support.
156 2009-10-11 Pedro Alves <pedro@codesourcery.com>
158 * procfs.c (procfs_make_note_section): Go back to only outputing
159 an NT_PSTATUS note when UNIXWARE is defined.
161 2009-10-11 Daniel Jacobowitz <dan@codesourcery.com>
163 * features/xinclude.dtd: Correct EMPTY typo.
165 2009-10-10 Michael Snyder <msnyder@vmware.com>
167 * i386-tdep.c (i386_process_record): Or-equals, not not-equals.
169 2009-10-10 Pedro Alves <pedro@codesourcery.com>
171 * mi/mi-cmd-stack.c (list_args_or_locals): Use internal_error.
172 Put "break" statements on their own line.
174 2009-10-09 Pedro Alves <pedro@codesourcery.com>
176 * linux-nat.c (linux_nat_wait_1): Bail out, if TARGET_WNOHANG and
177 we found no event while waiting for a specific LWP.
178 * infrun.c (handle_inferior_event): Handle TARGET_WAITKIND_IGNORE
179 before anything else.
181 2009-10-09 Pedro Alves <pedro@codesourcery.com>
183 * procfs.c (procfs_make_note_section): Always output a NT_PSTATUS
184 note when NEW_PROC_API is defined.
186 2009-10-09 Pedro Alves <pedro@codesourcery.com>
188 * corelow.c (core_has_fake_pid): New.
189 (core_close): Clear it.
190 (add_to_thread_list): Fake a pid if one is not found on a Solaris
191 core. Add the inferior here. Always add the thread, don't use
193 (core_open): Don't add the main thread or the inferior here unless
194 we find that the core had no .reg/NN sections.
195 (get_core_register_section): Handle Solaris cores with fake pids.
197 * corelow.c (add_to_thread_list): Fix typo.
199 2009-10-08 Paul Pluzhnikov <ppluzhnikov@google.com>
202 * elfread.c (elf_symtab_read): Don't use alloca in a loop.
204 2009-10-07 Jan Kratochvil <jan.kratochvil@redhat.com>
206 * i386-nat.c (i386_stopped_by_hwbp): Remove.
208 2009-10-07 Joel Brobecker <brobecker@adacore.com>
210 * NEWS: Update following the GDB 7.0 release.
212 2009-10-07 Pierre Muller <muller@ics.u-strasbg.fr>
214 ARI fix: OP eol rule.
215 * doublest.c (floatformat_from_length): Avoid operator at end of line.
216 * dwarf2-frame.c (dwarf2_build_frame_info): Idem.
217 * dwarf2read.c (read_array_order, dwarf_decode_macros): Idem.
218 * eval.c (evaluate_subexp_standard): Idem.
219 * event-loop.c (create_timer, handle_timer_event): Idem.
220 * expprint.c (print_subexp_standard): Idem.
221 * f-exp.y (variable): Idem.
222 * f-typeprint.c (f_print_type): Idem.
224 2009-10-06 Pierre Muller <muller@ics.u-strasbg.fr>
226 ARI fix: OP eol rule.
227 * blockframe.c (find_pc_partial_function): Avoid operator at end of
229 * buildsym.c (find_symbol_in_list): Idem.
230 (start_subfile, patch_subfile_names): Idem.
231 * c-exp.y (variable, yylex): Idem.
232 * c-typeprint.c (c_print_type, c_type_print_base): Idem.
233 * c-valprint.c (c_val_print): Idem.
234 * coffread.c (patch_opaque_types, process_coff_symbol): Idem.
235 * corelow.c (core_open): Idem.
236 * cris-tdep.c (move_reg_to_mem_movem_op): Idem.
237 * cli/cli-decode.c (help_cmd_list, find_command_name_length): Idem.
239 2009-10-06 Pierre Muller <muller@ics.u-strasbg.fr>
241 ARI fix: OP eol rule.
242 * ada-exp.y (block_lookup): Avoid operator at end of line.
243 * aix-thread.c (pd_enable): Idem.
244 * alpha-tdep.c (alpha_next_pc): Idem.
245 * arm-tdep.c (arm_skip_prologue, arm_scan_prologue): Idem.
246 (condition_true, coff_sym_is_thumb): Idem.
248 2009-10-06 Joel Brobecker <brobecker@adacore.com>
252 2009-10-06 Pierre Muller <muller@ics.u-strasbg.fr>
255 * target.c (debug_to_thread_architecture): Replace %p by %s using
256 host_address_to_string function.
258 2009-10-06 Tristan Gingold <gingold@adacore.com>
260 * darwin-nat.c: Add __TEXT __info_plist content.
261 (darwin_attach_pid): Update error message.
263 2009-10-06 Joel Brobecker <brobecker@adacore.com>
265 * MAINTAINERS: Add Tristan Gingold as Maintainer of the Darwin port.
267 2009-10-06 Joel Brobecker <brobecker@adacore.com>
269 * MAINTAINERS: Add Jan Kratochvil as Maintainer of the ia64 target.
271 2009-10-05 Pedro Alves <pedro@codesourcery.com>
274 2009-10-04 Pedro Alves <pedro@codesourcery.com>
275 * gdbinit.in: Set data-directory to @srcdir@.
277 2009-10-04 Pedro Alves <pedro@codesourcery.com>
279 * NEWS: Mention non-stop mode.
281 2009-10-04 Pedro Alves <pedro@codesourcery.com>
283 * gdbinit.in: Set data-directory to @srcdir@.
285 2009-10-02 Pedro Alves <pedro@codesourcery.com>
287 * linux-nat.c (TRAP_IS_SYSCALL, TRAP_REMOVE_SYSCALL_FLAG): Delete.
288 (SYSCALL_SIGTRAP): New.
289 (status_to_str): Adjust.
290 (get_pending_status): Pending events in lp->waitstatus don't map
291 to any signal. Simplify.
292 (linux_handle_syscall_trap): New.
293 (linux_handle_extended_wait): When handling PTRACE_EVENT_CLONE
294 events, use linux_ops->to_resume instead of direct ptrace with
295 PTRACE_CONT. Remove all TRAP_IS_SYSCALL handling.
296 (wait_lwp): Handle syscall traps with linux_handle_syscall_trap,
297 and clear the sysgood bit.
298 (status_callback): Make it clearer and add comments.
299 (cancel_breakpoints_callback): Ignore if LP has waitstatus set.
300 (linux_nat_filter_event): Handle syscall traps with
301 linux_handle_syscall_trap, and clear the sysgood bit. Move the
302 check for storing siginfo to after handling extended statuses and
303 syscall traps. Store status in the lwp object.
304 (linux_wait_1): Don't swap the pending status out of the lwp
305 object until after deciding we found an lwp with an interesting
306 event. Requeue a new pending signal if we find one while getting
307 rid or a pending SIGSTOP we sent ourselves. Don't clear the
310 * infrun.c (deal_with_syscall_event): Rename to ...
311 (handle_syscall_event): ... this. Always context switch and set
312 stop_pc, even if not catching the syscall. If not catching the
313 syscall, always resume with keep_going.
314 (handle_inferior_event): Adjust.
316 2009-10-02 Jan Kratochvil <jan.kratochvil@redhat.com>
318 Fix compatibility of --with-system-readline and readline-6.0+.
319 * configure.ac <--with-system-readline> (for readline_echoing_p): New
321 * config.in: Regenerate.
322 * configure: Regenerate.
324 2009-10-01 Joel Brobecker <brobecker@adacore.com>
326 * MAINTAINERS: Move Don Lee to the correct section (Write After
329 2009-10-01 Phil Muldoon <pmuldoon@redhat.com>
331 * infcall.c (call_function_by_hand): Add a new cleanup branch for
332 std::terminate breakpoints.
334 2009-09-29 Jan Kratochvil <jan.kratochvil@redhat.com>
336 * ia64-tdep.c (ia64_convert_from_func_ptr_addr): New variable buf.
337 Check first the descriptor memory is readable.
339 2009-09-29 Tom Tromey <tromey@redhat.com>
341 * python/py-value.c (valpy_string): NULL-terminate 'keywords'.
343 2009-09-29 Ulrich Weigand <uweigand@de.ibm.com>
345 * s390-tdep.c (s390_displaced_step_fixup): Use type ULONGEST
346 instead of CORE_ADDR for "amode".
348 2009-09-29 Joel Brobecker <brobecker@adacore.com>
350 * ia64-tdep.c: Update the comments on how we insert/remove
351 breakpoints for L-X instructions.
352 (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint):
353 Update the comments inside these functions.
355 2009-09-28 Ulrich Weigand <uweigand@de.ibm.com>
357 * gdbarch.sh (displaced_step_hw_singlestep): New callback.
358 * gdbarch.c, gdbarch.h: Regenerate.
359 * arch-utils.c (default_displaced_step_hw_singlestep): New function.
360 * arch-utils.h (default_displaced_step_hw_singlestep): Add prototype.
362 * ppc-linux-tdep.c (ppc_displaced_step_hw_singlestep): New function.
363 (rs6000_gdbarch_init): Install it.
365 * infrun.c (displaced_step_fixup): Use new callback to determine
366 whether to "step" or "continue" displaced copy.
367 (resume): Likewise. Do not call maybe_software_singlestep
368 for displaced stepping.
369 (maybe_software_singlestep): Do not handle displaced stepping.
371 2009-09-28 Ulrich Weigand <uweigand@de.ibm.com>
373 * eval.c (evaluate_subexp_standard) [OP_OBJC_MSGCALL]: Support
374 platforms that use function descriptors. Prefer to use function
375 pointer types instead of function types.
376 * linespec.c (decode_objc): Support function descriptors. Fully
377 initialize SAL result.
378 * objc-lang.c (find_methods): Support function descriptors.
379 Do not require function symbol to point to text section.
381 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): When calling
382 via a function pointer, use the descriptor it points to.
384 2009-09-28 Jan Kratochvil <jan.kratochvil@redhat.com>
386 Fix ia64 breakpoints in the L-X slot.
387 * ia64-tdep.c (ia64_memory_insert_breakpoint): Extend the comment.
388 New variable shadow_slotnum, use it appropriately instead of slotnum.
389 Move shadow_len initialization before SLOTNUM adjustment, cover now the
390 whole remaining bundle. Error now on breakpoints requested for the
391 slot 2 of L-X bundles. Better sanity check the requested slot 1 of L-X
393 (ia64_memory_remove_breakpoint): New variable shadow_slotnum, use it
394 appropriately instead of slotnum. Warn now on breakpoints requested
395 for the slot 2 of L-X bundles. Better sanity check the requested slot
396 1 of L-X bundles. Update the assertio check of PLACED_SIZE.
397 (ia64_breakpoint_from_pc): New variable shadow_slotnum, use it
398 appropriately instead of slotnum. Move *lenptr initialization before
399 SLOTNUM adjustment, cover now the whole remaining bundle. Error now
400 on breakpoints requested for the slot 2 of L-X bundles. Better sanity
401 check the requested slot 1 of L-X bundles. Simplify the returned
404 2009-09-28 Joel Brobecker <brobecker@adacore.com>
406 * ia64-tdep.c (ia64_memory_insert_breakpoint): Check the slotnum
407 and the type of instruction before deciding which slot to save
408 in the breakpoint shadown contents.
410 2009-09-28 Doug Evans <dje@google.com>
412 * linux-nat.c (status_to_str): Handle TRAP_IS_SYSCALL.
413 (TRAP_REMOVE_SYSCALL_FLAG): New macro.
414 (linux_nat_wait_1): Mask off is-syscall bit in wait status for
415 TRAP_IS_SYSCALL before passing value to caller.
417 2009-09-28 Ulrich Weigand <uweigand@de.ibm.com>
419 * valops.c (value_assign): Respect parent offset when
420 assigning to a bitfield.
422 2009-09-28 Hui Zhu <teawater@gmail.com>
424 * i386-tdep.c (i386_process_record): Remove "0x" that
427 2009-09-27 Ulrich Weigand <uweigand@de.ibm.com>
429 * s390-tdep.c (op_bctr, op_bctgr, op_bct, op1_bctg, op2_bctg,
430 op_bxh, op1_bxhg, op2_bxhg, op_bxle, op1_bxleg, op2_bxleg,
431 op1_brct, op2_brct, op1_brctg, op2_brctg, op_brxh, op1_brxhg,
432 op2_brxhg, op_brxle, op1_brxlg, op2_brxlg): New enum values.
433 (is_rsi, is_rie): New insn format decoder routines.
434 (s390_displaced_step_fixup): New function.
435 (s390_gdbarch_init): Install displaced stepping routines.
437 2009-09-27 Ulrich Weigand <uweigand@de.ibm.com>
439 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*):
440 Add linux-tdep.o to gdb_target_obs.
441 (s390*-*-*): Likewise.
443 2009-09-27 Don Lee <don.lee@sunplusct.com>
445 * score-tdep.c: Comment out some simulator dependent codes.
446 * score-tdep.h: Delete some simulator dependent macro definitions.
448 2009-09-27 Hui Zhu <teawater@gmail.com>
450 * record.c (record_open): Change "query" to "error".
451 (cmd_record_stop): Change "query" to "printf_unfiltered".
453 2009-09-26 Pierre Muller <muller@ics.u-strasbg.fr>
455 * i386-nat.c (i386_stopped_data_address): Also check that
456 hitted watch register is not vacant.
458 2009-09-25 Tom Tromey <tromey@redhat.com>
461 * language.h (struct language_defn) <la_get_string>: Add
462 'char_type' argument.
463 (LA_GET_STRING): Likewise.
464 (default_get_string, c_get_string): Update.
465 * language.c (default_get_string): Add 'char_type' argument.
466 * c-valprint.c (c_textual_element_type): Rename from
467 textual_element_type. No longer static. Update callers.
468 * c-lang.h (c_textual_element_type): Declare.
469 * c-lang.c (c_get_string): Add 'char_type' argument.
471 2009-09-25 Tom Tromey <tromey@redhat.com>
473 * charset.c (iconv_open): Use UTF-16 and UTF-32, not UCS-2 and
475 (iconv): Rename 'ucs_flag'.
476 (GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
477 * c-lang.c (charset_for_string_type): Use UTF-16 and UTF-32, not
479 (convert_ucn): Use UTF-32.
481 2009-09-25 Nick Roberts <nickrob@snap.net.nz>
483 * mi/gdb-mi.el: Remove file.
485 2009-09-23 Joel Brobecker <brobecker@adacore.com>
487 * record.c (record_open, record_store_registers, record_xfer_partial):
488 Replace calls to nquery by calls to query.
490 2009-09-23 John Wright <john.wright@hp.com>
493 * event-top.c (command_line_handler): Terminate linebuffer before
496 2009-09-22 Joel Brobecker <brobecker@adacore.com>
498 * solib.c (solib_bfd_open): Relax a bit the compatibility check.
500 2009-09-22 Daniel Jacobowitz <dan@codesourcery.com>
502 * source.c (forget_cached_source_info): Clear last_source_visited.
503 (init_last_source_visited): Delete.
504 (directory_command): Do not clear last_source_visited. Call
505 forget_cached_source_info only if required.
506 (unset_substitute_path_command, set_substitute_path_command): Call
507 forget_cached_source_info.
508 * mi/mi-cmd-env.c (mi_cmd_env_dir): Do not call
509 init_last_source_visited.
510 * defs.h (init_last_source_visited): Delete declaration.
512 2009-09-22 Tom Tromey <tromey@redhat.com>
515 * python/py-value.c (valpy_int): Use PyLong_FromLongLong.
516 (valpy_long): Likewise.
518 2009-09-22 Tom Tromey <tromey@redhat.com>
521 * eval.c (evaluate_subexp_standard) <do_call_it>: Handle internal
522 functions in EVAL_AVOID_SIDE_EFFECTS case.
524 2009-09-22 Jie Zhang <jie.zhang@analog.com>
526 * MAINTAINERS: Add myself under Write After Approval.
528 2009-09-22 Pierre Muller <muller@ics.u-strasbg.fr>
530 * windows-nat.c (ctrl_c_handler): Also handle CTRL_BREAK_EVENT.
532 2009-09-18 Keith Seitz <keiths@redhat.com>
534 * cp-support.h (cp_validate_operator): Declare new function.
535 * cp-support.c (cp_validate_operator): New function.
536 * linespec.c (decode_compound): For C++ check for a valid operator.
538 2009-09-21 Keith Seitz <keiths@redhat.com>
540 * c-exp.y (qualified_name): Call CHECK_TYPEDEF before deciding
541 that a type is not an aggregate type.
543 2009-09-21 Jason Orendorff <jason.orendorff@gmail.com>
546 * python/py-function.c (fnpy_init): Use xstrdup.
548 2009-09-21 Jie Zhang <jie.zhang@analog.com>
550 * doc/gdb.texinfo: Escape "{" and "}".
552 2009-09-21 Phil Muldoon <pmuldoon@redhat.com>
556 * c-lang.c (c_printstr): Do not loop past options->print_max when
557 iterating with wchar_iterate.
559 2009-09-21 Phil Muldoon <pmuldoon@redhat.com>
561 * python/py-value.c (valpy_getitem): Test value before allowing
564 2009-09-21 Hui Zhu <teawater@gmail.com>
565 Michael Snyder <msnyder@vmware.com>
567 * amd64-linux-tdep.c (amd64_all_but_ip_registers_record): New
569 (amd64_linux_syscall_record): Call
570 amd64_all_but_ip_registers_record if syscall is
572 (AMD64_LINUX_redzone, AMD64_LINUX_xstate,
573 AMD64_LINUX_frame_size): New macros.
574 (amd64_linux_record_signal): New function.
575 (amd64_linux_init_abi): Call set_gdbarch_process_record_signal.
577 2009-09-21 Hui Zhu <teawater@gmail.com>
578 Michael Snyder <msnyder@vmware.com>
580 * i386-linux-tdep.c (i386_all_but_ip_registers_record): New
582 (i386_linux_intx80_sysenter_record): Call
583 i386_all_but_ip_registers_record if syscall is sys_sigreturn
585 (I386_LINUX_xstate, I386_LINUX_frame_size): New macros.
586 (i386_linux_record_signal): New function.
587 (i386_linux_init_abi): Call set_gdbarch_process_record_signal.
589 2009-09-21 Hui Zhu <teawater@gmail.com>
590 Michael Snyder <msnyder@vmware.com>
592 * record.c (record_end_entry): New struct.
593 (record_type): Add end.
594 (record_arch_list_add_end): Set rec->u.end.sigval to
596 (record_message_args): New struct.
597 (record_message): Call gdbarch_process_record_signal.
598 (do_record_message): Add argument "signal".
599 (record_resume): Ditto.
600 (record_wait): Ditto. Check record_list->u.end.sigval
603 2009-09-21 Hui Zhu <teawater@gmail.com>
604 Michael Snyder <msnyder@vmware.com>
606 * gdbarch.sh (process_record_signal): New interface.
608 2009-09-19 Matt Rice <ratmice@gmail.com> (tiny change)
610 Checked in by Joel Brobecker <brobecker@gnat.com>
611 * varobj.c (varobj_update): Initialize children_changed.
613 2009-09-19 Vladimir Prus <vladimir@codesourcery.com>
615 * mi/mi-cmd-stack.c (list_args_or_locals): Workaround
618 2009-09-19 Vladimir Prus <vladimir@codesourcery.com>
620 * mi/mi-cmds.h (mi_cmd_stack_list_variables): Declare.
621 * mi/mi-cmds.c (mi_cmds): Register -stack-list-variables.
622 * mi/mi-cmd-stack.c (enum what_to_list): New.
623 (list_args_or_locals): Accept what_to_list parameter.
624 Use 'variables' as output name of all are requested.
625 (mi_cmd_stack_list_variables): New.
626 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Adjust.
628 2009-09-19 Eli Zaretskii <eliz@gnu.org>
630 * config/djgpp/fnchange.lst: Add missing edits.
632 2009-09-18 Maxim Grigoriev <maxim2405@gmail.com>
634 * xtensa-tdep.c (call0_analyze_prologue): Replace INT_MAX by UNIT_MAX.
636 2009-09-18 Jan Kratochvil <jan.kratochvil@redhat.com>
638 * objfiles.c (free_objfile): Clear SYMFILE_OBJFILE if it is OBJFILE.
639 * rs6000-nat.c (vmap_ldinfo): Only assertion check SYMFILE_OBJFILE now.
640 * symfile.c (syms_from_objfile, symbol_file_clear): Likewise.
642 2009-09-18 Ulrich Weigand <uweigand@de.ibm.com>
644 * rs6000-tdep.c (rs6000_builtin_type_vec128): Add v2_double
647 2009-09-17 Joel Brobecker <brobecker@adacore.com>
649 Fix a build failure on pa-hpux:
650 * gdb_ptrace.h (PT_SYSCALL): Define here if not already defined.
651 * inf-ttrace.c (inf_ttrace_wait): Fix compilation failure
652 introduced after field syscall_id inside struct target_waitstatus
653 has been renamed into syscall_number.
655 2009-09-16 H.J. Lu <hongjiu.lu@intel.com>
658 * Makefile.in (GDB_DATADIR_PATH): Renamed to ...
660 (xml-syscall-install): Updated.
662 2009-09-16 Joel Brobecker <brobecker@adacore.com>
664 GDB 7.0 branch created (branch timestamp: 2009-09-16 19:00 UTC)
665 * version.in: Bump version to 7.0.50.20090916-cvs.
667 2009-09-15 Tom Tromey <tromey@redhat.com>
669 * varobj.h (varobj_update_result_t) <new>: New field.
670 (varobj_get_child_range, varobj_set_child_range): Declare.
671 (varobj_list_children): Update.
672 (varobj_enable_pretty_printing, varobj_has_more)
673 (varobj_pretty_printed_p): Declare.
674 * varobj.c (pretty_printing): New global.
675 (varobj_enable_pretty_printing): New function.
676 (struct varobj_root) <from, to, constructor, child_iter,
677 saved_item>: New fields.
678 (varobj_create): Don't call install_default_visualizer.
679 (instantiate_pretty_printer): Don't use value_copy.
680 (varobj_has_more): New function.
681 (restrict_range): New function.
682 (install_dynamic_child): Likewise.
683 (dynamic_varobj_has_child_method): Likewise.
684 (update_dynamic_varobj_children): Remove 'new_and_unchanged'
685 argument; add 'new', 'unchanged', 'from', and 'to' arguments.
687 (varobj_get_num_children): Call update_dynamic_varobj_children.
688 (varobj_list_children): Add 'from' and 'to' arguments. Ignore
689 result of update_dynamic_varobj_children. Don't call
690 install_default_visualizer. Restrict result range.
691 (varobj_add_child): Don't call install_default_visualizer.
692 (varobj_pretty_printed_p): New function.
693 (install_visualizer): Rewrite. Move earlier in file.
694 (install_default_visualizer): Likewise.
695 (construct_visualizer): New function.
696 (install_new_value_visualizer): Likewise.
697 (install_new_value): Don't call release_value. Special case
698 pretty-printed objects. Use value_incref. Rearrange "changed"
700 (varobj_get_child_range): New function.
701 (varobj_set_child_range): Likewise.
702 (varobj_set_visualizer): Rewrite.
703 (varobj_update): Rewrite pretty-printing logic.
704 (new_variable): Initialize new fields.
705 (free_variable): Destroy new fields.
706 (value_of_root): Copy 'from' and 'to'.
707 (my_value_of_variable): Handle pretty-printers.
708 (value_get_print_value): Rework pretty-printing logic.
709 (cplus_describe_child): Don't use release_value.
710 * mi/mi-cmds.h (mi_cmd_enable_pretty_printing)
711 (mi_cmd_var_set_update_range): Declare.
712 * mi/mi-cmds.c (mi_cmds): Add enable-pretty-printing and
713 var-set-update-range.
714 * mi/mi-cmd-var.c (print_varobj): Update. Emit "dynamic"
716 (mi_cmd_var_create): Emit "has_more" attribute.
717 (mi_cmd_var_set_format): Plug memory leak.
718 (mi_print_value_p): Replace 'type' argument with 'var'. Handle
719 pretty-printed varobjs.
720 (mi_cmd_var_list_children): Accept 'from' and 'to' arguments.
721 Emit "has_more" attribute.
722 (mi_cmd_var_evaluate_expression): Plug memory leak.
723 (mi_cmd_var_assign): Likewise.
724 (varobj_update_one): Likewise. Emit "dynamic", "has_more", and
725 "new_children" attributes.
726 (mi_cmd_enable_pretty_printing): New function.
727 (mi_cmd_var_set_update_range): Likewise.
729 2009-09-15 Doug Evans <dje@google.com>
731 * dwarf2expr.h (dwarf_value_location): Add more comments describing
733 (struct dwarf_stack_value): New struct.
734 (struct dwarf_expr_context): Change type of `stack' from CORE_ADDR*
735 to struct dwarf_stack_value*.
736 (struct dwarf_expr_piece): Move `v.value' into its own struct, v.expr,
737 all uses updated. Add v.expr.in_stack_memory.
738 (dwarf_expr_push): Update declaration.
739 (dwarf_expr_fetch_in_stack_memory): Declare.
740 * dwarf2expr.c (dwarf_expr_grow_stack): Update calculation of
742 (dwarf_expr_push): New arg in_stack_memory, all callers updated.
743 (dwarf_expr_fetch_in_stack_memory): New function.
744 (add_piece): Set in_stack_memory for non-literal values.
745 (execute_stack_op): Allow ops to specify whether the value is on the
747 (execute_stack_op, case DW_OP_fbreg): Mark value as in stack memory.
748 (execute_stack_op, case DW_OP_call_frame_cfa): Ditto.
749 (execute_stack_op, case DW_OP_dup): Copy in_stack_memory flag.
750 (execute_stack_op, cases DW_OP_pick, DW_OP_over): Ditto.
751 (execute_stack_op, cases DW_OP_swap, DW_OP_rot): Update type of
753 * dwarf2loc.c (read_pieced_value): Call read_stack for values known
754 to be on the program's stack.
755 (dwarf2_evaluate_loc_desc, case DWARF_VALUE_MEMORY): Call
756 set_value_stack only for objects known to be in stack memory.
757 * dwarf2-frame.c (execute_stack_op): New arg initial_in_stack_memory,
760 * target.c (memory_xfer_partial): Pass correct length to dcache_update.
762 2009-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
764 Fix gcc-4.5 HEAD warnings for enum ada_operator.
765 * Makefile.in (HFILES_NO_SRCDIR): Add ada-operator.inc.
766 * ada-lang.h (enum ada_operator): Move it to ...
767 * ada-operator.inc: ... a new file.
768 * expression.h (enum exp_opcode): Include ada-operator.inc.
769 New element OP_UNUSED_LAST. Update comment for OP_EXTENDED0.
771 Fix gcc-4.5 HEAD warnings for GDB_FORM_cached_string.
772 * dwarf2read.c (GDB_FORM_cached_string)
773 (dwarf_form_name <GDB_FORM_cached_string>): Remove.
774 (struct attribute <dwarf_form>): Reduce the bit width.
775 (struct attribute <string_is_canonical>, DW_STRING_IS_CANONICAL): New.
776 (read_attribute_value <DW_FORM_string>)
777 (read_attribute_value <DW_FORM_strp>): Initialize
778 DW_STRING_IS_CANONICAL.
779 (dwarf2_name, dump_die_shallow <DW_FORM_string>)
780 (dump_die_shallow <DW_FORM_strp>): Update the code using former
781 GDB_FORM_cached_string.
783 2009-09-14 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
785 * amd64-linux-tdep.c: Include xml-syscall.h header, define the XML
786 syscall name for the architecture.
787 (amd64_linux_get_syscall_number): New function.
788 (amd64_linux_init_abi): Register the correct functions for syscall
789 catchpoint; set the correct syscall file name.
790 * breakpoint.c: New include: xml-syscall.h.
791 (set_raw_breakpoint_without_location): Setting the parameters
792 for the catch syscall feature.
793 (insert_catch_syscall): New.
794 (remove_catch_syscall): New.
795 (breakpoint_hit_catch_syscall): New.
796 (print_it_catch_syscall): New.
797 (print_one_catch_syscall): New.
798 (print_mention_catch_syscall): New.
799 (catch_syscall_breakpoint_ops): New.
800 (syscall_catchpoint_p): New.
801 (create_catchpoint_without_mention): New.
802 (create_catchpoint): Modified in order to use
803 create_catchpoint_without_mention.
804 (create_syscall_event_catchpoint): New.
805 (clean_up_filters): New.
806 (catch_syscall_split_args): New.
807 (catch_syscall_command_1): New.
808 (delete_breakpoint): Add cleanup for catch syscall.
809 (is_syscall_catchpoint_enabled): New.
810 (catch_syscall_enabled): New.
811 (catching_syscall_number): New.
812 (catch_syscall_completer): New completer function.
813 (add_catch_command): Add the completer function for catchpoints.
814 * breakpoint.h (syscalls_to_be_caught): New vector.
815 (catch_syscall_enabled): New.
816 (catching_syscall_number): New.
817 * gdbarch.c: Regenerated.
818 * gdbarch.h: Regenerated.
819 * gdbarch.sh: Add syscall catchpoint functions and structures.
820 (get_syscall_number): New.
821 (UNKNOWN_SYSCALL): New definition.
822 * i386-linux-nat.c (i386_linux_resume): Select the proper request
823 to be made for ptrace() considering if we are catching syscalls
825 * i386-linux-tdep.c: Include xml-syscall.h header, define the XML
826 syscall name for the architecture.
827 (i386_linux_get_syscall_number): New.
828 (i386_linux_init_abi): Register the correct functions for syscall
829 catchpoint; set the correct syscall file name.
830 * inf-child.c (inf_child_set_syscall_catchpoint): New.
831 (inf_child_target): Assign default values to target_ops.
832 * inf-ptrace.c (inf_ptrace_resume): Select the proper request
833 to be made for ptrace() considering if we are catching syscalls
835 * inferior.h (struct inferior): Included new variables
836 any_syscall_count, syscalls_counts and total_syscalls_count,
837 used to keep track of requested syscall catchpoints.
838 * infrun.c (resume): Add syscall catchpoint.
839 (deal_with_syscall_event): New.
840 (handle_inferior_event): Add syscall entry/return events.
841 (inferior_has_called_syscall): New.
842 * linux-nat.c: Define some helpful variables to track wether we have
843 support for the needed ptrace option.
844 (linux_test_for_tracesysgood): New.
845 (linux_supports_tracesysgood): New.
846 (linux_enable_tracesysgood): New.
847 (linux_enable_event_reporting): Save the current used ptrace
849 (linux_child_post_attach): Calling linux_enable_tracesysgood.
850 (linux_child_post_startup_inferior): Likewise.
851 (linux_child_set_syscall_catchpoint): New function.
852 (linux_handle_extended_wait): Handle the case which the inferior stops
853 because it has called or returned from a syscall.
854 (linux_target_install_ops): Install the necessary functions to handle
856 * linux-nat.h (struct lwp_info): Include syscall_state into the
857 structure, which indicates if we are in a syscall entry or return.
858 * ppc-linux-tdep.c: Include xml-syscall.h header, define the XML
859 syscall filename for the arch.
860 (ppc_linux_get_syscall_number): New.
861 (ppc_linux_init_abi): Register the correct functions for syscall
862 catchpoint; setting the correct name for the XML syscall file.
863 * target.c (update_current_target): Update/copy functions related to
865 (target_waitstatus_to_string): Add syscall catchpoint entry/return
867 * target.h (struct target_waitstatus): Add syscall number.
868 (struct syscall): New struct to hold information about syscalls
870 (struct target_ops): Add ops for syscall catchpoint.
871 (inferior_has_called_syscall): New.
872 (target_set_syscall_catchpoint): New.
873 * xml-support.c (xml_fetch_content_from_file): New function,
874 transferred from xml-tdesc.c.
875 * xml-support.h (xml_fetch_content_from_file): New.
876 * xml-tdesc.c (fetch_xml_from_file): Function removed;
877 transferred to xml-support.c.
878 (file_read_description_xml): Updated to use the new
879 xml_fetch_content_from_file function.
880 * syscalls/gdb-syscalls.dtd: New definition file for syscall's XML
882 * syscalls/amd64-linux.xml: New file containing information about
883 syscalls for GNU/Linux systems that use amd64 architecture.
884 * syscalls/i386-linux.xml: New file containing information about
885 syscalls for GNU/Linux systems that use i386 architecture.
886 * syscalls/ppc-linux.xml: New file containing information about
887 syscalls for GNU/Linux systems that use PPC architecture.
888 * syscalls/ppc64-linux.xml: New file containing information about
889 syscalls for GNU/Linux systems that use PPC64 architecture.
890 * xml-syscall.c: New file containing functions for manipulating
892 * xml-syscall.h: New file, exporting the functions above mentioned.
893 * Makefile.in: Support for relocatable GDB datadir and XML
895 * NEWS: Added information about the catch syscall feature.
897 2009-09-14 Doug Evans <dje@google.com>
899 * target.c (memory_xfer_partial): Only update dcache after we know
902 2009-09-14 Paul Pluzhnikov <ppluzhnikov@google.com>
904 *minsyms.c (lookup_minimal_symbol_by_pc_section_1): Assert non-NULL
906 (lookup_minimal_symbol_by_pc_section): Check for NULL section.
907 (lookup_minimal_symbol_by_pc): Adjust.
909 2009-09-14 Paul Pluzhnikov <ppluzhnikov@google.com>
911 * objfiles.c (qsort_cmp): Remove asserts.
912 (insert_section_p, filter_debuginfo_sections): New function.
913 (filter_overlapping_sections): Likewise.
914 (update_section_map): Adjust.
916 2009-09-13 Daniel Jacobowitz <dan@codesourcery.com>
918 * frame.c (get_frame_id): Default to outer_frame_id if the this_id
919 method does not supply an ID. Assert that the result is not
921 (outer_frame_id): New.
922 (frame_id_p): Accept outer_frame_id.
923 (frame_id_eq): Allow outer_frame_id to be equal to itself.
924 (frame_find_by_id): Revert previous local workarounds.
925 (get_prev_frame_1): Adjust end-of-stack check to test outer_frame_id.
926 * frame.h (null_frame_id, frame_id_p): Update comments.
927 (outer_frame_id): Declare.
928 * infrun.c (handle_inferior_event): Do not treat all steps from the
929 outermost frame as subroutine calls.
931 * libunwind-frame.c (libunwind_frame_this_id): Do not clear THIS_ID.
932 * hppa-tdep.c (hppa_stub_frame_this_id): Likewise.
933 * ia64-tdep.c (ia64_frame_this_id): Likewise.
934 (ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id):
935 Use outer_frame_id instead of null_frame_id.
936 * amd64obsd-tdep.c (amd64obsd_trapframe_cache): Use outer_frame_id.
937 * i386obsd-tdep.c (i386obsd_trapframe_cache): Likewise.
938 * inline-frame.c (inline_frame_this_id): Refuse outer_frame_id.
939 * thread.c (restore_selected_frame): Update comment and remove
942 2009-09-11 Doug Evans <dje@google.com>
944 * dwarf2expr.c (execute_stack_op, case DW_OP_piece): Delete unused
945 local addr_or_regnum.
947 * objfiles.c (struct objfile_data): Delete member cleanup and replace
949 (register_objfile_data_with_cleanup): Delete arg cleanup and replace
950 with save, free. All callers updated.
951 (clear_objfile_data): Replace cleanup loop with separate save and
953 * objfiles.h (register_objfile_data_with_cleanup): Update.
954 * arm-tdep.c (arm_objfile_data_free): Renamed from
955 arm_objfile_data_cleanup, all callers updated.
956 * dwarf2read.c (dwarf2_per_objfile_free): Renamed from
957 dwarf2_per_objfile_cleanup, all callers updated.
958 * python/py-objfile.c (py_free_objfile): Renamed from clean_up_objfile,
960 * python/py-type.c (save_objfile_types): Renamed from
961 clean_up_objfile_types, all callers updated.
963 2009-09-11 Tom Tromey <tromey@redhat.com>
965 * dwarf2loc.c (struct piece_closure) <arch>: New field.
966 (dwarf2_evaluate_loc_desc): Update.
967 (dwarf2_loc_desc_needs_frame): Likewise.
968 (allocate_piece_closure): Initialize new field.
969 (read_pieced_value): Update.
970 (write_pieced_value): Update.
971 (copy_pieced_value_closure): Update.
972 * dwarf2expr.h (enum dwarf_value_location): New.
973 (struct dwarf_expr_context) <in_reg>: Remove.
974 <location, len, data>: New fields.
975 (struct dwarf_expr_piece) <in_reg, value>: Remove.
976 <location, v>: New fields.
977 * dwarf2expr.c (add_piece): Remove in_reg, value arguments.
979 (require_composition): New function.
980 (execute_stack_op): Update.
981 <DW_OP_implicit_value, DW_OP_stack_value>: New cases.
982 <DW_OP_reg0>: Set location, not in_reg.
983 <DW_OP_regx>: Likewise. Use require_composition.
984 <DW_OP_fbreg>: Update.
985 <DW_OP_piece>: Likewise.
986 * dwarf2-frame.c (execute_stack_op): Update.
988 2009-09-10 Anthony Green <green@moxielogic.com>
990 * moxie-tdep.c (moxie_analyze_prologue): Recognize new prologue
993 2009-09-10 Michael Snyder <msnyder@vmware.com>
995 * remote.c (PACKET_bc, PACKET_bs): New enums.
996 (remote_protocol_features): Add ReverseStep, ReverseContinue.
997 (remote_resume): Check for reverse capability.
998 (_initialize_remote): Add packet config for "bs" and "bc" packets.
999 * NEWS (new options): Mention set/show for "bs" and "bc" packets.
1001 2009-09-10 Joel Brobecker <brobecker@adacore.com>
1003 * top.c (interactive_mode): New static variable.
1004 (show_interactive_mode): New function.
1005 (input_from_terminal_p): If interactive_mode is not auto, then
1006 use that rather than checking the stdin settings.
1007 (init_main): Add "set/show interactive-mode" command.
1008 * NEWS: Add entry for new "set/show interactive-mode" command.
1010 2009-09-10 Joel Brobecker <brobecker@adacore.com>
1012 * configure.ac: Fix the names of the python source and object files
1013 following the renaming done in an earlier change.
1014 * configure: Regenerate.
1016 2009-09-08 Joel Brobecker <brobecker@adacore.com>
1018 Fix a build failure on AIX.
1019 * rs6000-nat.c (vmap_exec): Rewrite using target_get_section_table
1020 instead of relying on the to_sections/to_section_end target_ops
1021 field, since the latter have been removed in a previous patch.
1023 2009-09-08 Thiago Jung Bauermann <thiago.bauermann@gmail.com>
1025 * Makefile.in (py-cmd.o): Renamed from python-cmd.o. Updated
1027 (py-frame.o): Renamed from python-frame.o. Updated references.
1028 (py-function.o): Renamed from python-function.o. Updated references.
1029 (py-objfile.o): Renamed from python-objfile.o. Updated references.
1030 (py-prettyprint.o): Renamed from python-prettyprint.o. Updated
1032 (py-type.o): Renamed from python-type.o. Updated references.
1033 (py-utils.o): Renamed from python-utils.o. Updated references.
1034 (py-value.o): Renamed from python-value.o. Updated references.
1035 * py-cmd.c: Renamed from python-cmd.c.
1036 * py-frame.c: Renamed from python-frame.c.
1037 * py-function.c: Renamed from python-function.c.
1038 * py-objfile.c: Renamed from python-objfile.c.
1039 * py-prettyprint.c: Renamed from python-prettyprint.c.
1040 * py-type.c: Renamed from python-type.c.
1041 * py-utils.c: Renamed from python-utils.c.
1042 * py-value.c: Renamed from python-value.c.
1044 2009-09-08 Joel Brobecker <brobecker@adacore.com>
1046 Avoid quadratic behavior when computing the value of a register.
1047 * frame.c (frame_stash): New static constant.
1048 (frame_stash_add, frame_stash_find, frame_stash_invalidate):
1050 (get_frame_id): Minor reformatting. Add the frame to the frame stash.
1051 (frame_find_by_id): Search the frame stash first before walking all
1052 frames starting from te current_frame.
1053 (reinit_frame_stash): Add call to frame_stash_invalidate ();
1055 2009-09-08 Joel Brobecker <brobecker@adacore.com>
1057 * block.c (contained_in): Return zero for nested functions.
1058 * blockframe.c (block_innermost_frame): Delete unreferenced local
1061 2009-09-08 Doug Evans <dje@google.com>
1063 * target.c (initialize_targets): Fix thinko in stack_cache_enabled_p.
1065 2009-09-08 Michael Snyder <msnyder@vmware.com>
1067 * amd64-linux-tdep.h (enum amd64_syscall): New enum consts,
1068 to replace literal consts used in amd64-linux-tdep.c
1069 * linux-record.h (enum gdb_syscall): New enum consts, to replace
1070 literal consts used in amd64-linux-tdep.c and linux-record.c.
1071 * amd64-linux-tdep.c (amd64_canonicalize_syscall): New function,
1072 translate from native amd64 Linux syscall id to internal gdb id.
1073 (amd64_linux_syscall_record): Switch statement abstracted out
1074 and replaced with a call to amd64_canonicalize_syscall.
1075 * linux-record.c (record_linux_system_call): Replace literal
1076 consts with enum consts.
1077 * i386-linux-tdep.c (i386_canonicalize_syscall): New function,
1078 trivially translate from native i386 Linux syscalls to gdb syscalls.
1079 (i386_linux_intx80_sysenter_record):
1081 2009-09-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1083 * gdb/Makefile.in (check//%): Parse 'config.status --version'
1084 output to recreate the configuration from the testsuite directory,
1085 rather than running 'config.status --recheck' from a different
1086 build directory. Let configure do the recursion rather than
1089 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1091 * ia64-tdep.c (ia64_memory_remove_breakpoint): Call do_cleanups
1094 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1096 * ia64-tdep.c (ia64_memory_insert_breakpoint)
1097 (ia64_memory_remove_breakpoint): Return immediately if any of memory
1098 reads fail. Do not combine the VAL values.
1100 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1102 Fix ia64 shadowing of breakpoints in multiple slots of a single bundle.
1103 * ia64-tdep.c (ia64_memory_insert_breakpoint): New call
1104 of make_show_memory_breakpoints_cleanup with parameter 0. Move the
1105 reading of SHADOW_CONTENTS to this memory state point of code. Update
1106 comment for the memory re-read.
1108 2009-09-07 Michael Snyder <msnyder@vmware.com>
1110 * record.c: Minor comment and white space fix-ups.
1112 2009-09-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1114 * m68k-tdep.c (m68k_gdbarch_init): Allocate TDEP as cleared.
1115 * sparc-tdep.c (sparc32_gdbarch_init): Allocate TDEP as cleared.
1116 Remove explicit clearing of TDEP fields.
1118 2009-09-06 Hui Zhu <teawater@gmail.com>
1120 * i386-tdep.c (i386_record_check_override): Deleted.
1121 (i386_record_lea_modrm): Ditto.
1122 (i386_process_record): Ditto.
1124 2009-09-05 Eli Zaretskii <eliz@gnu.org>
1126 * config/djgpp/djconfig.sh: Fix for Autoconf 2.64.
1127 * config/djgpp/config.sed: Fix for Autoconf 2.64.
1129 2009-09-05 Hui Zhu <teawater@gmail.com>
1131 * i386-tdep.c (i386_record_s): Add orig_addr.
1132 (i386_record_check_override): New function.
1133 (i386_record_lea_modrm): Call i386_record_check_override.
1134 (i386_process_record): Ditto.
1136 2009-09-03 Nathan Froyd <froydnj@codesourcery.com>
1138 * dwarf2loc.c (struct piece_closure): New.
1139 (allocate_piece_closure): New function.
1140 (read_pieced_value): New function.
1141 (write_pieced_value): New function.
1142 (copy_pieced_value_closure): New function.
1143 (free_pieced_value_closure): New function.
1144 (pieced_value_funcs): Define.
1145 (dwarf2_evaluate_loc_desc): Return a computed value for a variable
1146 described with pieces.
1148 2009-09-03 Pierre Muller <muller@ics.u-strasbg.fr>
1149 Richard Earnshaw <rearnsha@arm.com>
1151 * arm-tdep.c (displaced_write_reg): Replace call to abort by call
1154 2009-09-02 Tom Tromey <tromey@redhat.com>
1156 * frame.h (frame_unwinder_is): Declare.
1157 * frame.c (frame_unwinder_is): New function.
1158 * dwarf2loc.c: Include dwarf2-frame.h.
1159 (dwarf_expr_frame_cfa): New function.
1160 (dwarf2_evaluate_loc_desc): Use it.
1161 (needs_frame_frame_cfa): New function.
1162 (dwarf2_loc_desc_needs_frame): Use it.
1163 * dwarf2expr.h (struct dwarf_expr_context) <get_frame_cfa>: New
1165 * dwarf2expr.c (execute_stack_op) <DW_OP_call_frame_cfa>: New
1167 * dwarf2-frame.h (dwarf2_frame_cfa): Declare.
1168 * dwarf2-frame.c (no_get_frame_cfa): New function.
1169 (execute_stack_op): Use it.
1170 (dwarf2_frame_cfa): New function.
1172 2009-09-02 Hui Zhu <teawater@gmail.com>
1174 * record.c (record_resume): Change "signal" to "siggnal".
1176 2009-09-01 Hui Zhu <teawater@gmail.com>
1178 * record.c (record_resume): Change "siggnal" to "signal".
1180 2009-09-01 Hui Zhu <teawater@gmail.com>
1182 * record.c (record_resume_siggnal): Deleted.
1183 (record_resume): Ditto.
1184 (record_wait): Change record_resume_siggnal to
1187 2009-08-31 Jacob Potter <jdpotter@google.com>
1188 Doug Evans <dje@google.com>
1190 Implement TARGET_OBJECT_STACK_MEMORY.
1191 * NEWS: Add note on new "set stack-cache" option.
1192 * corefile.c (read_stack): New function.
1193 * dcache.c (dcache_struct): New member ptid.
1194 (dcache_enable_p): Mark as obsolete.
1195 (show_dcache_enabled_p): Flag option as deprecated.
1196 (dcache_invalidate): Update ptid.
1197 (dcache_invalidate_line): New function.
1198 (dcache_read_line): No longer check cacheable attribute, stack
1199 accesses get cached despite attribute.
1200 (dcache_init): Set ptid.
1201 (dcache_xfer_memory): Flush cache if from different ptid than before.
1202 Update cache after write.
1203 (dcache_update): New function.
1204 (dcache_info): Report ptid.
1205 (_initialize_dcache): Update text for `remotecache' to indicate it
1207 * dcache.h (dcache_update): Declare.
1208 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with
1210 * frame-unwind.c (frame_unwind_got_memory): Ditto.
1211 * gdbcore.h (read_stack): Declare.
1212 * memattr.c (mem_enable_command): Call target_dcache_invalidate
1213 instead of dcache_invalidate.
1214 (mem_disable_command, mem_delete_command): Ditto.
1215 * target.c (stack_cache_enabled_p_1): New static global.
1216 (stack_cache_enabled_p): New static global.
1217 (set_stack_cache_enabled_p): New function.
1218 (show_stack_cache_enabled_p): New function.
1219 (target_dcache): Make static.
1220 (target_dcache_invalidate): New function.
1221 (target_load, target_resume): Call target_dcache_invalidate
1222 instead of dcache_invalidate.
1223 (memory_xfer_partial): New arg object, all callers updated.
1224 Check for existing inferior before calling dcache routines.
1225 When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache.
1226 (target_xfer_partial): Call memory_xfer_partial for
1227 TARGET_OBJECT_STACK_MEMORY.
1228 (target_read_stack): New function.
1229 (initialize_targets): Install new option `stack-cache'.
1230 * target.h: Remove #include of dcache.h.
1231 (enum target_object): New value TARGET_OBJECT_STACK_MEMORY.
1232 (target_dcache): Delete.
1233 (target_dcache_invalidate): Declare.
1234 (target_read_stack): Declare.
1235 * top.c (prepare_execute_command): New function.
1236 (execute_command): Call prepare_execute_command
1237 instead of free_all_values.
1238 * top.h (prepare_execute_command): Declare.
1239 * valops.c (get_value_at): New function.
1240 (value_at): Guts moved to get_value_at.
1241 (value_at_lazy): Similarly.
1242 (value_fetch_lazy): Call read_stack for stack values.
1243 * value.c (struct value): New member `stack'.
1244 (value_stack, set_value_stack): New functions.
1245 * value.h (value_stack, set_value_stack): Declare.
1246 * mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command
1247 instead of free_all_values.
1249 2009-08-29 Hui Zhu <teawater@gmail.com>
1251 * i386-tdep.c (i386_process_record): Fix the error of string
1252 ops instructions's handler.
1254 2009-08-28 Doug Evans <dje@google.com>
1256 * top.c (execute_command): Remove redundant comment.
1258 2009-08-28 Daniel Jacobowitz <dan@codesourcery.com>
1262 * value.c (value_primitive_field): Do not save value_offset for
1264 (unpack_bits_as_long): Do not read an entire ULONGEST.
1266 2009-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1268 Support constant DW_AT_data_member_location by GCC PR debug/40659.
1270 (dwarf2_add_field <DW_TAG_member> <DW_AT_data_member_location>):
1271 Initialize BYTE_OFFSET to 0 by default. Explicitly check if
1273 (dwarf2_add_field <DW_TAG_inheritance> <DW_AT_data_member_location>)
1274 (read_common_block <DW_AT_data_member_location>): New variable
1275 byte_offset. Fix crash on non-DW_BLOCK ATTR values.
1277 2009-08-28 Hui Zhu <teawater@gmail.com>
1279 * record.c (record_list_release_next): Change the first
1280 record_reg to record_end.
1282 2009-08-27 Doug Evans <dje@google.com>
1284 * value.c (free_all_values): Tweak comment.
1286 * NEWS: Add note on "info sharedlibrary".
1287 Remove note on "set print symbol-loading".
1288 * main.c (captured_main): Pass !batch for from_tty when calling
1289 symbol_file_add_main.
1290 * objfiles.h (objfile_has_partial_symbols): Declare.
1291 (objfile_has_full_symbols): Declare.
1292 * objfiles.c (objfile_has_partial_symbols): New function.
1293 (have_partial_symbols): Use it.
1294 (objfile_has_full_symbols): New function.
1295 (have_full_symbols): Use it.
1296 * solib.c: Include interps.h.
1297 (solib_read_symbols): Back out patch of 2008-07-10.
1298 Add test for info_verbose for symbol loading messages for
1299 consistency with symfile.c.
1300 (info_sharedlibrary_command): Handle optional parameter of regex of
1301 libraries to list. Inform user of libraries without debugging info.
1302 Rewrite to use ui_out routines to format output.
1303 * symfile.c (print_symbol_loading): Delete.
1304 (symbol_file_add_with_addrs_or_offsets): Back out patch of 2008-07-10.
1305 Print "no debugging symbols found" only if from_tty || info_verbose;
1306 and only check file being loaded, not all files.
1307 (reread_symbols): Test file being loaded for whether it has symbols,
1309 (__initialize_symfile): Delete `set print symbol-loading'.
1310 * symfile.h (print_symbol_loading): Delete.
1312 2009-08-27 Jan Kratochvil <jan.kratochvil@redhat.com>
1314 * varobj.c (varobj_create): Error if the specified frame was not found
1317 2009-08-26 Michael Snyder <msnyder@vmware.com>
1319 * i386-tdep.c (i386_process_record): Break out of prefix loop
1320 if not amd64. Otherwise inc/dec instructions are lost.
1322 2009-08-25 Keith Seitz <keiths@redhat.com>
1324 * c-exp.y (yylex): Add cxx_only check for tokentab2 and tokentab3
1326 (tokentab3): Add cxx_only for DOT_STAR.
1328 2009-08-25 Pedro Alves <pedro@codesourcery.com>
1330 * inferior.c (print_inferior): Align columns left. Remove header
1331 for the the "current" column. Rename column "Id" to "Num".
1332 Rename column "PID" to "Description". Print if there's no selected
1335 2009-08-25 Jan Kratochvil <jan.kratochvil@redhat.com>
1337 Fix ia64 start crash when GDB built with -lmcheck.
1338 * ia64-tdep.c (ia64_gdbarch_init): Allocate TDEP as cleared. Remove
1339 specific clearing of TDEP SIGCONTEXT_REGISTER_ADDRESS and
1342 2009-08-24 Keith Seitz <keiths@redhat.com>
1344 * c-exp.y (tokentab3): Add new token, ARROW_STAR. Changed all users.
1345 (tokentab2): Add new token, DOT_STAR. Changed all users.
1347 2009-08-24 Keith Seitz <keiths@redhat.com>
1349 * symtab.c (default_make_symbol_completion_list): Keep
1350 ':', too, so that we can limit searches in namespaces
1353 2009-08-24 Tom Tromey <tromey@redhat.com>
1355 * python/python-value.c (valpy_richcompare): Don't return from
1358 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1360 * CONTRIBUTE: Bump documented Autoconf version.
1361 * configure.ac: Do not substitute datarootdir, htmldir,
1362 pdfdir, docdir. Do not process --with-datarootdir,
1363 --with-htmldir, --with-pdfdir, --with-docdir.
1364 * configure: Regenerate.
1366 * aclocal.m4: Regenerate.
1367 * config.in: Likewise.
1368 * configure: Likewise.
1369 * gnulib/Makefile.in: Likewise.
1371 * configure.ac: Use AC_USE_SYSTEM_EXTENSIONS instead of
1372 AC_GNU_SOURCE, AC_AIX, AC_ISC_POSIX.
1374 2009-08-21 Paul Pluzhnikov <ppluzhnikov@google.com>
1376 * objfiles.h (gdb_bfd_ref): New prototype.
1377 * objfiles.c (gdb_bfd_ref): New function.
1378 (allocate_objfile): Call it.
1379 (gdb_bfd_unref): Adjust assertion.
1380 * solib.c (solib_map_sections): Add reference.
1381 (symbol_add_stub): Don't add reference here.
1382 * symfile.c (reread_symbols): Add reference.
1384 2009-08-21 Ken Werner <ken@linux.vnet.ibm.com>
1385 Doug Evans <dje@google.com>
1387 * jit.c (jit_event_handler): Use paddress to print target addresses.
1388 Wrap printf string in _().
1390 2009-08-21 Doug Evans <dje@google.com>
1392 * jit.c (jit_read_descriptor): New arg gdbarch, all callers updated.
1393 (jit_read_code_entry, jit_register_code): Ditto.
1394 (jit_event_handler): Ditto.
1395 (jit_inferior_init): Renamed from previous jit_inferior_created_hook.
1396 (jit_inferior_created_hook, jit_breakpoint_re_set): New functions.
1397 (jit_inferior_created_observer): Renamed from
1398 jit_inferior_created_hook1, all callers updated.
1399 * jit.h (jit_breakpoint_re_set): Declare.
1400 (jit_event_handler): Update prototype.
1401 * breakpoint.c (breakpoint_re_set): Call jit_breakpoint_re_set instead
1402 of jit_inferior_created_hook.
1404 2009-08-21 Hui Zhu <teawater@gmail.com>
1406 * record.c (record_wait): Change the argument of
1407 record_beneath_to_wait to options.
1409 2009-08-20 Jacob Potter <jdpotter@google.com>
1411 Replace dcache with splay tree.
1412 Remove partially implemented writeback support.
1413 * dcache.c: Include splay-tree.h.
1414 (LINE_SIZE_POWER): Change from 5 to 6.
1415 (DCACHE_SIZE): Change from 64 to 4096.
1416 (ENTRY_INVALID, ENTRY_VALID, ENTRY_DIRTY): Delete.
1417 (state_chars): Delete.
1418 (struct dcache_block): Clean up; remove state and anydirty fields.
1419 (struct dcache_struct): Redefine as a splay tree and linked list.
1420 (last_cache): Make static.
1421 (dcache_invalidate, dcache_hit): Rewrite for new cache structure.
1422 (dcache_read_line, dcache_alloc): Rewrite for new cache structure.
1423 (dcache_write_line): Delete.
1424 (dcache_writeback): Delete.
1425 (dcache_peek_byte): Clean up; remove "invalid" state check.
1426 (dcache_poke_byte): Rewrite for new cache structure; clarify comment.
1427 (dcache_splay_tree_compare): New function.
1428 (dcache_init, dcache_free): Rewrite for new cache structure.
1429 (dcache_xfer_memory): Rewrite for new write-through cache structure.
1430 (dcache_print_line): New function.
1431 (dcache_info): Rewrite for new cache structure.
1432 (_initialize_dcache): Update "info dcache" help text.
1433 * dcache.h (dcache_xfer_memory): Update declaration.
1434 * target.c (memory_xfer_partial): Update calls to dcache_xfer_memory.
1436 2009-08-19 Reid Kleckner <reid@kleckner.net>
1438 Add interface for JIT code generation.
1439 * NEWS: Announce JIT interface.
1440 * Makefile.in (SFILES): Add jit.c.
1441 (HFILES_NO_SRCDIR): Add jit.h.
1442 (COMMON_OBS): Add jit.o.
1445 * breakpoint.h (enum bptype): Add bp_jit_event to enum.
1447 (update_breakpoints_after_exec): Delete jit breakpoints after exec.
1448 (bpstat_what): Update event table for bp_jit_event.
1449 (print_it_typical): Added case for bp_jit_event.
1450 (print_one_breakpoint_location): Added case for bp_jit_event.
1451 (allocate_bp_location): Added case for bp_jit_event.
1452 (mention): Added case for bp_jit_event.
1453 (delete_command): Added case for bp_jit_event.
1454 (breakpoint_re_set_one): Added case for bp_jit_event.
1455 (breakpoint_re_set): Added call to jit_inferior_created_hook.
1456 (create_jit_event_breakpoint): New.
1457 * infrun.c (handle_inferior_event): Add handler for jit event.
1458 (follow_exec): Add call to jit_inferior_created_hook.
1460 2009-08-19 Ulrich Weigand <uweigand@de.ibm.com>
1462 * value.c (enum internalvar_kind): Replace INTERNALVAR_SCALAR by
1463 INTERNALVAR_INTEGER and INTERNALVAR_POINTER.
1464 (union internalvar_data): Replace "scalar" member by "integer"
1466 (value_of_internalvar): Handle INTERNALVAR_INTEGER and
1467 INTERNALVAR_POINTER instead of INTERNALVAR_SCALAR.
1468 (get_internalvar_integer): Likewise.
1469 (set_internalvar): Likewise.
1470 (set_internalvar_integer): Likewise.
1471 (preserve_one_internalvar): Likewise.
1472 (value_from_pointer): Handle typedef'd pointer types.
1474 2009-08-18 Tom Tromey <tromey@redhat.com>
1476 * utils.c (add_internal_problem_command): Free set_doc and
1478 * remote.c (add_packet_config_cmd): Free set_doc and show_doc.
1479 * language.c (add_language): Free language_set_doc.
1481 2009-08-18 Tom Tromey <tromey@redhat.com>
1483 * Makefile.in (ALL_TARGET_OBS): Remove prologue-value.o, solib.o.
1485 2009-08-17 Ulrich Weigand <uweigand@de.ibm.com>
1487 * symfile.c (reread_symbols): Call objfiles_changed *before*
1488 calling clear_symtab_users.
1490 2009-08-17 Michael Snyder <msnyder@vmware.com>
1492 * amd64-tdep.c: Add a frame unwinder for function epilogues.
1493 (amd64_in_function_epilogue_p): New function.
1494 (amd64_epilogue_frame_sniffer): New function.
1495 (amd64_epilogue_frame_cache): New function.
1496 (amd64_epilogue_frame_this_id): New function.
1497 (amd64_epilogue_frame_unwind): New struct frame_unwind.
1498 (amd64_init_abi): Hook the new unwinder.
1500 * amd64-linux-tdep.c (amd64_linux_init_abi): Set gdbarch to use
1501 SVR4 method for skip_trampoline_code.
1503 2009-08-17 Pedro Alves <pedro@codesourcery.com>>
1505 * objfiles.c (objfile_relocate): Relocate the entry point before
1506 relocating the section offsets. Flush the section map before
1507 resetting breakpoints.
1509 2009-08-14 Doug Evans <dje@google.com>
1511 * symfile.c (find_separate_debug_file): Remove double free of
1514 2009-08-14 Pedro Alves <pedro@codesourcery.com>
1516 * top.c (any_thread_of): Delete.
1517 (kill_or_detach): Use any_thread_of_process.
1518 * top.c (print_inferior_quit_action): New.
1519 (quit_confirm): Rewrite to print info about all inferiors.
1520 * target.c (dispose_inferior): New.
1521 (target_preopen): Use it.
1523 2009-08-14 Pedro Alves <pedro@codesourcery.com>
1525 * ui-file.h (ui_file_xstrdup): Mention that the length argument
1527 * ui-file.c (ui_file_xstrdup): Don't dereference LENGTH if it is
1529 * aix-thread.c (aix_thread_extra_thread_info): Pass NULL as length
1530 parameter to ui_file_xstrdup.
1531 * arm-tdep.c (_initialize_arm_tdep): Ditto.
1532 * infrun.c (print_target_wait_results): Ditto.
1533 * language.c (add_language): Ditto.
1534 * linespec.c (cplusplus_error): Ditto.
1535 * remote.c (escape_buffer): Ditto.
1536 * typeprint.c (type_to_string): Ditto.
1537 * utils.c (error_stream): Ditto.
1538 * varobj.c (value_get_print_value): Ditto.
1539 * xtensa-tdep.c (xtensa_verify_config): Replace `dummy' local with
1540 `length' local. Pass it to ui_file_xstrdup, and avoid an strlen
1542 * gdbarch.sh (verify_gdbarch): Ditto.
1543 * gdbarch.c: Regenerate.
1544 * cli/cli-setshow.c (do_setshow_command): Pass NULL as length
1545 parameter to ui_file_xstrdup.
1546 * python/python-frame.c (frapy_str): Ditto.
1547 * python/python-type.c (typy_str): Use the length local instead of
1549 * python/python-value.c (valpy_str): Pass NULL as length parameter
1552 2009-08-13 Doug Evans <dje@google.com>
1554 * utils.c (gnu_debuglink_crc32): Store crc32_table as unsigned int
1555 instead of unsigned long.
1557 2009-08-13 Tom Tromey <tromey@redhat.com>
1559 * varobj.c (update_dynamic_varobj_children): Don't use
1561 * value.h: (preserve_one_value): Declare.
1562 (value_prepend_to_list, value_remove_from_list): Remove.
1563 * value.c (preserve_one_value): No longer static.
1564 (preserve_values): Call preserve_python_values.
1565 (value_prepend_to_list): Remove.
1566 (value_remove_from_list): Remove.
1567 * python/python.h (values_in_python): Don't declare.
1568 (preserve_python_values): Declare.
1569 * python/python-value.c (values_in_python): Change type. Move
1571 (struct value_object): Add struct tag.
1572 <next, prev>: New fields.
1573 (valpy_dealloc): Update.
1574 (note_value): New function.
1575 (valpy_new): Use value_incref, note_value.
1576 (preserve_python_values): New function.
1577 (valpy_positive): Don't use value_copy.
1578 (value_to_value_object): Use value_incref, note_value.
1579 (convert_value_from_python): Update comment.
1581 2009-08-13 Pedro Alves <pedro@codesourcery.com>
1583 * remote.c (remote_pid_to_str): If printing a process id and we
1584 don't know what the remote pid could be, output "Remote target";
1585 otherwise, use normal_pid_to_str.
1587 2009-08-13 Tom Tromey <tromey@redhat.com>
1589 * language.h (longest_raw_hex_string): Remove unused declaration.
1591 2009-08-13 Pedro Alves <pedro@codesourcery.com>
1595 * language.c (language, type, range, case_sensitive): Make const.
1596 (show_language_command): Don't call deprecated_show_value_hack.
1597 Special case "auto".
1598 (set_language_command): An unrecognized language is now an
1599 internal error instead of a user error. Don't call set_lang_str.
1600 (show_type_command): Don't call deprecated_show_value_hack.
1601 Special case "auto". Use warning.
1602 (set_type_command): An unrecognized type is now an internal error
1603 instead of a user error. Output type check mismatch with language
1604 here. Don't call set_type_str.
1605 (show_range_command): Don't call deprecated_show_value_hack.
1606 Special case "auto". Use warning.
1607 (set_range_command): An unrecognized range check is now an
1608 internal error instead of a warning. Output range check mismatch
1609 with language here. Don't call set_range_str.
1610 (show_case_command): Don't call deprecated_show_value_hack.
1611 Special case "auto". Use warning.
1612 (set_case_command): Don't call set_case_str. An unrecognized case
1613 check is now an internal error instead of a warning. Output range
1614 check mismatch with language here. Don't call set_case_str.
1615 (set_type_range_case): Don't call set_type_str, set_range_str or
1617 (set_lang_str, set_type_str, set_range_str, set_case_str): Delete.
1618 (add_language): Install or reinstall the "set language" command
1619 here, and make it an enum command. Build the enumeration and the
1620 help string from the current list of known languages.
1621 (_initialize_language): Don't install "set language" here. Make
1622 "set check type", "set check range" and "set case-sensitive" enum
1623 commands. Register the "auto" "local" and "unknown" languages in
1626 2009-08-13 Pedro Alves <pedro@codesourcery.com>
1628 Revert 2009-08-07 changes for PR gdb/8869:
1630 * language.c (set_language_command): Strip whitespace.
1631 (set_type_command): Likewise.
1632 (set_range_command): Likewise.
1634 * language.c (language_completer): New function.
1635 (range_or_type_completer): New function.
1636 (case_completer): New function.
1637 (_initialize_language): Set completers.
1638 * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
1640 (add_setshow_string_noescape_cmd): Likewise.
1641 (add_setshow_integer_cmd): Likewise.
1642 (add_setshow_uinteger_cmd): Likewise.
1643 (add_setshow_zinteger_cmd): Likewise.
1644 (add_setshow_zuinteger_cmd): Likewise.
1645 * command.h (add_setshow_string_cmd,
1646 add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
1647 add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
1649 2009-08-12 Michael Snyder <msnyder@vmware.com>
1651 * remote.c (remote_add_inferior): Remove unused local.
1652 (remote_add_thread): Ditto.
1654 (remote_current_thread): Ditto.
1655 (remote_stop_ns): Ditto.
1656 (remote_parse_stop_reply): Ditto.
1657 (remote_get_pending_stop_replies): Ditto.
1658 (remote_wait_ns): Ditto.
1659 (remote_wait_as): Ditto.
1660 (send_g_packet): Ditto.
1661 (remote_fetch_registers): Ditto.
1662 (store_register_using_P): Ditto.
1663 (remote_store_registers): Ditto.
1664 (remote_remove_breakpoint): Ditto.
1665 (remote_write_qxfer): Ditto.
1666 (remote_read_qxfer): Ditto.
1668 2009-08-11 Tom Tromey <tromey@redhat.com>
1670 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Make a cleanup.
1671 (dwarf2_loc_desc_needs_frame): Likewise.
1672 * dwarf2expr.h (make_cleanup_free_dwarf_expr_context): Declare.
1673 * dwarf2expr.c (free_dwarf_expr_context_cleanup): New function.
1674 (make_cleanup_free_dwarf_expr_context): Likewise.
1675 * dwarf2-frame.c (execute_stack_op): Make a cleanup.
1677 2009-08-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1679 * objfiles.c (gdb_bfd_unref): Use the bfd_usrdata accessor.
1680 * solib.c (symbol_add_stub): Likewise.
1681 * symfile.c (symfile_bfd_open): Assert BFD_USRDATA is NULL.
1683 2009-08-10 Paul Pluzhnikov <ppluzhnikov@google.com>
1685 * objfiles.c (qsort_cmp): Remove assert.
1686 (preferred_obj_section): New function.
1687 (update_section_map): Filter duplicates.
1689 2009-08-10 Tristan Gingold <gingold@adacore.com>
1691 * solib-darwin.c (find_program_interpreter): Simplify the code by
1692 looking up for the load_dylinker command instead of reading the
1693 corresponding (but deprecated) section.
1694 (darwin_solib_create_inferior_hook): Adjust: do not free the
1697 2009-08-10 Tristan Gingold <gingold@adacore.com>
1699 * i386-darwin-tdep.c (i386_m128_p): New function.
1700 (i386_darwin_arg_type_alignment): Ditto.
1701 (i386_darwin_push_dummy_call): Ditto.
1702 (i386_darwin_init_abi): Define Darwin specific push_dummy_call.
1703 Adjust long_double size. Adjust pc offset in setjump buffer.
1705 2009-08-10 Hui Zhu <teawater@gmail.com>
1707 Add Linux AMD64 process record support.
1709 * amd64-linux-tdep.c (amd64_linux_record_tdep): New variable.
1710 This struct has the argument for the function
1711 "record_linux_system_call".
1712 (amd64_linux_syscall_record): New function. Parse the
1713 system call instruction and call function
1714 "record_linux_system_call" to record execute log.
1715 (i386_linux_init_abi): Initialize "amd64_linux_record_tdep".
1716 Set "amd64_linux_syscall_record" to "i386_syscall_record".
1718 2009-08-10 Hui Zhu <teawater@gmail.com>
1720 Add process record Linux system call 64 bits support.
1722 * linux-record.h (linux_record_tdep): Add size_pointer,
1723 size_size_t, size_iovec and arg6. Change the values of
1724 size_int, size_long and size_ulong to
1725 gdbarch_int_bit (gdbarch) / TARGET_CHAR_BIT,
1726 gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT,
1727 gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT.
1728 * i386-linux-tdep.c (i386_linux_init_abi): Ditto.
1729 (i386_linux_intx80_sysenter_record): Add a check for system
1731 * linux-record.c (record_linux_system_call): Make this
1732 function support 64 bits.
1734 2009-08-10 Hui Zhu <teawater@gmail.com>
1736 Add AMD64 process record instruction set support.
1738 * i386-tdep.h (gdbarch_tdep): Add record_regmap for registers
1739 because the AMD64's registers order in GDB is not same with
1741 Add i386_syscall_record to be the syscall function handle
1743 (record_i386_regnum): Number for record_regmap.
1744 * i386-tdep.c (OT_QUAD): For 64 bits.
1745 (i386_record_s): Add rex_x, rex_b, rip_offset and
1746 popl_esp_hack for AMD64 instruction set. And regmap for
1748 (i386_record_lea_modrm_addr): Support AMD64 instruction set
1750 (i386_record_lea_modrm): Ditto.
1751 (i386_record_push): New function. Record the execution log
1753 (I386_RECORD_ARCH_LIST_ADD_REG): New macro to record the
1755 (i386_process_record): Support AMD64 instruction set.
1756 * amd64-tdep.c (amd64_record_regmap): For record_regmap.
1757 (amd64_init_abi): Set amd64_record_regmap to record_regmap.
1759 2009-08-08 Pedro Alves <pedro@codesourcery.com>
1761 * bfd-target.c (struct target_bfd_data): New.
1762 (target_bfd_xfer_partial): Adjust to get at the section table from
1764 (target_bfd_get_section_table): Ditto.
1765 (target_bfd_xclose): Ditto. Get the bfd pointer from the
1766 target_bfd_data structure, from the section table.
1767 (target_bfd_reopen): Store a struct target_bfd_data in the
1768 target_ops to_data field, instead of a target_section_table.
1770 2009-08-08 Aleksandar Ristovski <aristovski@qnx.com>
1771 Hui Zhu <teawater@gmail.com>
1773 * record.c (record_store_registers): Remove unused variable.
1775 2009-08-07 Tom Tromey <tromey@redhat.com>
1777 * language.c (set_language_command): Strip whitespace.
1778 (set_type_command): Likewise.
1779 (set_range_command): Likewise.
1781 2009-08-07 Tom Tromey <tromey@redhat.com>
1784 * language.c (language_completer): New function.
1785 (range_or_type_completer): New function.
1786 (case_completer): New function.
1787 (_initialize_language): Set completers.
1788 * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
1790 (add_setshow_string_noescape_cmd): Likewise.
1791 (add_setshow_integer_cmd): Likewise.
1792 (add_setshow_uinteger_cmd): Likewise.
1793 (add_setshow_zinteger_cmd): Likewise.
1794 (add_setshow_zuinteger_cmd): Likewise.
1795 * command.h (add_setshow_string_cmd,
1796 add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
1797 add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
1799 2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
1802 * dwarf2-frame.c (qsort_fde_cmp): Use stable sort.
1804 2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
1806 * dwarf2-frame.c (struct dwarf2_cie): Remove 'next'.
1807 (struct dwarf2_cie_table): New.
1808 (struct dwarf2_fde): Remove 'next'.
1809 (struct dwarf2_fde_table): New.
1810 (struct comp_unit): Remove 'cie'.
1811 (bsearch_cie_cmp, bsearch_fde_cmp): New function.
1812 (find_cie, dwarf2_frame_find_fde): Use bsearch.
1813 (add_cie, add_fde): Use array instead of linked list.
1814 (decode_frame_entry, decode_frame_entry_1): New parameters.
1815 (qsort_fde_cmp): New function.
1816 (dwarf2_build_frame_info): Adjust.
1818 2009-08-06 Don Lee <don.lee@sunplusct.com>
1820 * score-tdep.c: Support a new Sunplus CT S+core variant, S+core 3.
1821 * score-tdep.h: Ditto.
1823 * configure.tgt: Test do we have a simulator.
1824 * MAINTAINERS: Add myself under target score
1826 2009-08-06 Nick Roberts <nickrob@snap.net.nz>
1828 * utils.c (defaulted_query): Don't ask for confirmation if server
1831 2009-08-05 Tom Tromey <tromey@redhat.com>
1833 * spu-tdep.h (SPUADDR_SPU): Cast result to int.
1835 2009-08-04 Paul Pluzhnikov <ppluzhnikov@google.com>
1837 * objfiles.h (OBJF_KEEPBFD): Delete.
1838 (gdb_bfd_unref): New prototype.
1839 * objfiles.c (gdb_bfd_unref): New function.
1840 (free_objfile): Call gdb_bfd_unref.
1841 * solib.c (free_so): Likewise.
1842 (symbol_add_stub): Set refcount.
1844 2009-08-04 Hui Zhu <teawater@gmail.com>
1845 Michael Snyder <msnyder@vmware.com>
1847 * record.c (record_mem_entry): New field 'mem_entry_not_accessible'.
1848 (record_arch_list_add_mem): Initialize 'mem_entry_not_accessible'.
1849 (record_wait): Set 'mem_entry_not_accessible' flag if target
1850 memory not readable. Don't try to change target memory if
1851 'mem_entry_not_accessible' is set.
1853 2009-08-03 Richard Guenther <rguenther@suse.de>
1854 Jan Kratochvil <jan.kratochvil@redhat.com>
1856 Fix memory corruption on reread of file through a symbolic link.
1857 * symfile.c (find_separate_debug_file): Initialize CANON_NAME earlier.
1858 Allocate DEBUGFILE with length based on CANON_NAME. Free CANON_NAME on
1859 all the return paths.
1861 2009-08-03 Jim Ingham <jingham@apple.com>
1862 Vladimir Prus <vladimir@codesourcery.com>
1864 Implement -break-commands
1866 * breakpoint.c (get_breakpoint, breakpoint_set_commands): New.
1867 (commands_command): Use breakpoint_set_commands.
1868 * breakpoint.h (get_breakpoint, breakpoint_set_commands): Declare.
1870 * mi/mi-cmds.h (mi_cmd_break_commands): New.
1871 * mi/mi-cmds.c: Register -break-commands.
1872 * mi/mi-cmd-break.c (mi_cmd_break_commands, mi_read_next_line)
1873 (mi_command_line_array, mi_command_line_array_cnt)
1874 (mi_command_line_array_ptr): New.
1876 2009-08-03 Jim Ingham <jingham@apple.com>
1877 Vladimir Prus <vladimir@codesourcery.com>
1879 Refactor reading of commands
1881 * defs.h (read_command_lines_1): Declare.
1882 * cli/cli-script.c (read_next_line): Only return string,
1884 (process_next_line): New, extracted from read_next_line.
1885 (recurse_read_control_structure): Take a function pointer to the
1887 (get_command_line) Pass the read_next_line as reader function
1888 into recurse_read_control_structure.
1889 (read_command_lines_1): New, extracted from...
1890 (read_command_lines): ...here.
1892 2009-07-31 Kazu Hirata <kazu@codesourcery.com>
1894 * procfs.c (proc_set_current_signal): Populate mysinfo before
1896 (proc_clear_current_signal): Likewise.
1897 (proc_set_watchpoint): Populate pwatch before copying it to arg.
1899 2009-07-31 Michael Snyder <msnyder@vmware.com>
1901 * remote.c (store_register_using_P): Call putpkt and getpkt
1902 directly instead of calling remote_send.
1903 (store_registers_using_G): Ditto.
1904 (fetch_register_using_p): Ditto.
1906 * remote.c (store_register_using_P): Make error msg more verbose.
1907 (store_registers_using_G): Ditto.
1908 (fetch_register_using_p): Ditto.
1910 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1912 * spu-tdep.c: Include "infcall.h".
1913 (spu_address_class_type_flags): New function.
1914 (spu_address_class_type_flags_to_name): Likewise.
1915 (spu_address_class_name_to_type_flags): Likewise.
1916 (spu_pointer_to_address): Handle __ea pointers.
1917 (spu_auto_flush_cache_p): New static variable.
1918 (spu_objfile_from_frame): New function.
1919 (flush_ea_cache, spu_attach_normal_stop): Likewise.
1920 (show_spu_auto_flush_cache): Likewise.
1921 (spu_gdbarch_init): Install address class handlers.
1922 (_initialize_spu_tdep): Attach to normal_stop observer.
1923 Install "set spu auto-flush-cache" / "show spu auto-flush-cache"
1926 * NEWS: Mention "set/show spu auto-flush-cache" commands.
1928 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1930 * spu-tdep.c: Include "block.h".
1931 (setspucmdlist, showspucmdlist): New static variables.
1932 (spu_stop_on_load_p): Likewise.
1933 (spu_catch_start): New function.
1934 (show_spu_command, set_spu_command): New functions.
1935 (show_spu_stop_on_load): Likewise.
1936 (_initialize_spu_tdep): Attach spu_catch_start to new_objfile observer.
1937 Install "set spu" / "show spu" prefix command handler.
1938 Install "set spu stop-on-load" / "show spu stop-on-load" command.
1940 * NEWS: Mention "set/show spu stop-on-load" commands.
1942 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1944 * ppc-linux-tdep.c: Include "solib.h", "solist.h", "exceptions.h",
1945 "arch-utils.h", and "spu-tdep.h".
1946 (spu_context_objfile, spe_context_lm_addr, spe_context_offset):
1947 New static variables.
1948 (spe_context_cache_ptid, spe_context_cache_address): Likewise.
1949 (ppc_linux_spe_context_lookup): New function.
1950 (ppc_linux_spe_context_inferior_created): Likewise.
1951 (ppc_linux_spe_context_solib_loaded): Likewise.
1952 (ppc_linux_spe_context_solib_unloaded): Likewise.
1953 (ppc_linux_spe_context): Likewise.
1954 (struct ppu2spu_cache, struct ppu2spu_data): New data types.
1955 (ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register,
1956 ppu2spu_unwind_register, ppu2spu_sniffer,
1957 ppu2spu_dealloc_cache): New functions.
1958 (ppu2spu_unwind): New static variable.
1959 (ppc_linux_init_abi): Install cross-architecture unwinder.
1960 (_initialize_ppc_linux_tdep): Attach to observers.
1962 * spu-tdep.c (struct spu2ppu_cache): New data type.
1963 (spu2ppu_prev_arch, spu2ppu_this_id, spu2ppu_prev_register,
1964 spu2ppu_sniffer, spu2ppu_dealloc_cache): New functions.
1965 (spu2ppu_unwind): New static variable.
1966 (spu_gdbarch_init): Install cross-architecture unwinder.
1968 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1970 * target.h (enum strata): New value arch_stratum.
1971 * target.c (target_require_runnable): Skip arch_stratum targets.
1973 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
1974 solib-spu.o and spu-multiarch.o to gdb_target_obs.
1975 * Makefile.in (ALL_TARGET_OBS): Add solib-spu.o and spu-multiarch.o.
1976 (ALLDEPFILES): Add solib-spu.c and spu-multiarch.c.
1978 * solib-spu.c: New file.
1979 * solib-spu.h: New file.
1980 * spu-multiarch.c: New file.
1982 * spu-tdep.h (SPUADDR, SPUADDR_SPU, SPUADDR_ADDR): New macros.
1984 * spu-tdep.c (struct gdbarch_tdep): New member id.
1985 (spu_gdbarch_id): New function.
1986 (spu_lslr): New function.
1988 (spu_address_to_pointer): New function.
1989 (spu_pointer_to_address): Support SPU ID address encoding. Use
1990 spu_gdbarch_id and spu_lslr.
1991 (spu_integer_to_address): Likewise.
1992 (spu_frame_unwind_cache): Update for encoded addresses.
1993 (spu_unwind_pc, spu_unwind_sp): Likewise.
1994 (spu_read_pc, spu_write_pc): Likewise.
1995 (spu_push_dummy_call): Likewise.
1996 (spu_software_single_step): Likewise.
1997 (spu_get_longjmp_target): Likewise.
1998 (spu_overlay_update_osect): Likewise.
2000 (spu_dis_asm_print_address): New function.
2001 (gdb_print_insn_spu): Likewise.
2003 (spu_gdbarch_init): Store SPU ID in tdep structure.
2004 Install spu_address_to_pointer and gdb_print_insn_spu.
2006 * ppc-linux-tdep.c: Include "observer.h", "auxv.h", "elf/common.h"
2008 (ppc_linux_entry_point_addr): New static variable.
2009 (ppc_linux_inferior_created): New function.
2010 (ppc_linux_displaced_step_location): Likewise.
2011 (ppc_linux_init_abi): Enable Cell/B.E. support if supported
2013 (_initialize_ppc_linux_tdep): Attach to inferior_created observer.
2015 * NEWS: Mention multi-architecture and Cell/B.E. debugging
2018 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
2020 * linux-nat.c: Include <sys/vfs.h>.
2021 (SPUFS_MAGIC): Define.
2022 (spu_enumerate_spu_ids): New function.
2023 (linux_proc_xfer_spu): New function.
2024 (linux_xfer_partial): Handle TARGET_OBJECT_SPU.
2026 (iterate_over_spus): New function.
2027 (struct linux_spu_corefile_data): New data type.
2028 (linux_spu_corefile_callback): New function.
2029 (linux_spu_make_corefile_notes): New function.
2030 (linux_nat_make_corefile_notes): Call it.
2032 * corelow.c (struct spuid_list): New data type.
2033 (add_to_spuid_list): New function.
2034 (core_xfer_partial): Handle TARGET_OBJECT_SPU.
2036 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
2038 * features/Makefile: Allow sub-platform specific expedite settings.
2039 (WHICH): Add rs6000/powerpc-cell32l and rs6000/powerpc-cell64l.
2040 (rs6000/powerpc-cell32l-expedite): Define.
2041 (rs6000/powerpc-cell64l-expedite): Likewise.
2042 * features/rs6000/powerpc-cell32l.xml: New file.
2043 * features/rs6000/powerpc-cell64l.xml: New file.
2044 * features/rs6000/powerpc-cell32l.c: New generated file.
2045 * features/rs6000/powerpc-cell64l.c: New generated file.
2047 * regformats/rs6000/powerpc-cell32l.dat: New generated file.
2048 * regformats/rs6000/powerpc-cell64l.dat: New generated file.
2050 * config/djgpp/fnchange.lst: Add mappings for new files.
2052 * ppc-linux-tdep.h (tdesc_powerpc_cell32l): Add prototype.
2053 (tdesc_powerpc_cell64l): Likewise.
2054 * ppc-linux-tdep.c: Include "features/rs6000/powerpc-cell32l.c"
2055 and "features/rs6000/powerpc-cell64l.c".
2056 (_initialize_ppc_linux_tdep): Initialize target descriptions.
2057 (ppc_linux_spu_section): New function.
2058 (ppc_linux_core_read_description): Detect Cell/B.E. core files.
2059 * ppc-linux-nat.c (PPC_FEATURE_CELL): Define.
2060 (ppc_linux_read_description): Detect Cell/B.E. architecture.
2062 * rs6000-tdep.c (rs6000_gdbarch_init): Do not trust BFD wordsize
2063 if exec file is not PowerPC architecture.
2065 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
2067 * features/gdb-target.dtd (target): Accept optional
2068 <compatible> elements.
2069 (compatible): Define element.
2071 * target-descriptions.h (tdesc_compatible_p): New.
2072 (tdesc_add_compatible): New.
2073 * target-descriptions.c (arch_p): New VEC_P type.
2074 (struct target_desc): New member compatible.
2075 (free_target_description): Handle it.
2076 (maint_print_c_tdesc_cmd): Likewise.
2077 (tdesc_compatible_p): New function.
2078 (tdesc_add_compatible): New function.
2080 * xml-tdesc.c (tdesc_end_compatible): New function.
2081 (target_children): Handle <compatible> element.
2083 * arch-utils.c (choose_architecture_for_target): Accept target
2084 description instead of BFD architecture as input. Query target
2085 description for compatible architectures.
2086 (gdbarch_info_fill): Update call.
2088 * NEWS: Mention <compatible> element of target descriptions.
2090 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
2092 * breakpoint.c (remove_breakpoints): If removing one breakpoint
2093 location fails, still continue to remove other locations.
2094 (remove_hw_watchpoints): Likewise.
2095 (detach_breakpoints): Likewise.
2097 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
2099 * breakpoint.h (enum enable_state): Add bp_startup_disabled.
2100 (disable_breakpoints_before_startup): Add prototype.
2101 (enable_breakpoints_after_startup): Likewise.
2103 * breakpoint.c (executing_startup): New static variable.
2104 (describe_other_breakpoints): Handle bp_startup_disabled.
2105 (check_duplicates_for): Likewise.
2106 (disable_breakpoints_before_startup): New function.
2107 (enable_breakpoints_after_startup): New function.
2108 (create_breakpoint): Mark new breakpoints as bp_startup_disabled
2109 if executing_startup flag is true.
2110 (break_command_really): Likewise.
2111 (breakpoint_re_set_one): Skip bp_startup_disabled breakpoints.
2113 2009-07-31 Julian Brown <julian@codesourcery.com>
2115 * arm-linux-tdep.c (arch-utils.h, inferior.h, gdbthread.h, symfile.h):
2117 (arm_linux_cleanup_svc, arm_linux_copy_svc): New.
2118 (cleanup_kernel_helper_return, arm_catch_kernel_helper_return): New.
2119 (arm_linux_displaced_step_copy_insn): New.
2120 (arm_linux_init_abi): Initialise displaced stepping callbacks.
2121 * arm-tdep.c (DISPLACED_STEPPING_ARCH_VERSION): New macro.
2123 (displaced_read_reg, displaced_in_arm_mode, branch_write_pc)
2124 (bx_write_pc, load_write_pc, alu_write_pc, displaced_write_reg)
2125 (insn_references_pc, copy_unmodified, cleanup_preload, copy_preload)
2126 (copy_preload_reg, cleanup_copro_load_store, copy_copro_load_store)
2127 (cleanup_branch, copy_b_bl_blx, copy_bx_blx_reg, cleanup_alu_imm)
2128 (copy_alu_imm, cleanup_alu_reg, copy_alu_reg)
2129 (cleanup_alu_shifted_reg, copy_alu_shifted_reg, cleanup_load)
2130 (cleanup_store, copy_extra_ld_st, copy_ldr_str_ldrb_strb)
2131 (cleanup_block_load_all, cleanup_block_store_pc)
2132 (cleanup_block_load_pc, copy_block_xfer, cleanup_svc, copy_svc)
2133 (copy_undef, copy_unpred): New.
2134 (decode_misc_memhint_neon, decode_unconditional)
2135 (decode_miscellaneous, decode_dp_misc, decode_ld_st_word_ubyte)
2136 (decode_media, decode_b_bl_ldmstm, decode_ext_reg_ld_st)
2137 (decode_svc_copro, arm_process_displaced_insn)
2138 (arm_displaced_init_closure, arm_displaced_step_copy_insn)
2139 (arm_displaced_step_fixup): New.
2140 (arm_gdbarch_init): Initialise max insn length field.
2141 * arm-tdep.h (DISPLACED_TEMPS, DISPLACED_MODIFIED_INSNS): New
2143 (displaced_step_closure, pc_write_style): New.
2144 (arm_displaced_init_closure, displaced_read_reg)
2145 (arm_process_displaced_insn, arm_displaced_init_closure)
2146 (displaced_read_reg, displaced_write_reg, arm_displaced_step_copy_insn)
2147 (arm_displaced_step_fixup): Add prototypes.
2149 2009-07-31 Pedro Alves <pedro@codesourcery.com>
2150 Julian Brown <julian@codesourcery.com>
2152 * infrun.c (displaced_step_fixup): If this is a software
2153 single-stepping arch, don't tell the target to single-step.
2154 (maybe_software_singlestep): Return 0 if we're using displaced
2156 (resume): If this is a software single-stepping arch, and
2157 displaced-stepping is enabled, use it for all single-step
2160 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
2162 * Makefile.in (ACLOCAL, ACLOCAL_AMFLAGS, aclocal_m4_deps)
2163 (AUTOCONF, configure_deps, AUTOHEADER): New variables.
2164 ($(srcdir)/aclocal.m4, $(srcdir)/configure, $(srcdir)/config.in)
2165 (am--refresh): New rules.
2166 (stamp-h, config.status): List config.in and configure including
2168 * aclocal.m4: Regenerate.
2169 * configure: Regenerate.
2171 2009-07-30 Thomas Schwinge <tschwinge@gnu.org>
2173 * gnu-nat.c (add_task_commands) <stopped>: Register the correct
2176 2009-07-30 H.J. Lu <hongjiu.lu@intel.com>
2178 * ia64-tdep.c (ia64_access_reg): Correct paddress.
2180 2009-07-30 Jan Kratochvil <jan.kratochvil@redhat.com>
2182 Replace public function varobj_list by all_root_varobjs iterator.
2183 * mi/mi-cmd-var.c (struct mi_cmd_var_update, mi_cmd_var_update_iter):
2185 (mi_cmd_var_update): Replace the varobj_list call by all_root_varobjs.
2186 Remove the variables rootlist, cr. New variable data.
2187 * varobj.c (rootcount, varobj_list): Remove.
2188 (install_variable, uninstall_variable): Remove the rootcount updates.
2189 (all_root_varobjs): New function.
2190 (varobj_invalidate): Use the all_root_varobjs call. Move the code to...
2191 (varobj_invalidate_iter): ... a new function.
2192 * varobj.h (varobj_list): Remove the prototype.
2193 (all_root_varobjs): New prototype.
2195 2009-07-29 Paul Pluzhnikov <ppluzhnikov@google.com>
2198 * dbxread.c (read_dbx_symtab): Reduce stack use.
2200 2009-07-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2202 Fix gcc-4.5 HEAD warnings.
2203 * cp-name-parser.y (%union <typed_val_int>, %token GLOBAL)
2204 (GLOBAL_CONSTRUCTORS, GLOBAL_DESTRUCTORS, demangler_special <GLOBAL>):
2206 (yylex <"global constructors keyed to ">)
2207 (yylex <"global destructors keyed to ">): Base it on DEMANGLER_SPECIAL.
2208 (cp_comp_to_string): Remove variables str, prefix and buf. Remove the
2209 GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS handling.
2210 (cp_print): Remove the GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS
2213 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
2215 * NEWS: Mention ARM VFP support.
2216 * target-descriptions.c (tdesc_register_type): Make public.
2217 (tdesc_unnumbered_register): New function.
2218 (tdesc_register_reggroup_p): Allow missing
2219 pseudo_register_reggroup_p.
2220 * target-descriptions.h (tdesc_register_type): Declare.
2221 (tdesc_unnumbered_register): Declare.
2222 * arm-tdep.c (arm_neon_quad_read, arm_neon_quad_write): New functions.
2223 (arm_push_dummy_call): Use arm_neon_quad_write.
2224 (arm_neon_double_type, arm_neon_quad_type): New functions.
2225 (arm_register_type): Handle VFP and NEON registers. Override the
2226 types of double-precision registers for NEON. Disable FPA registers
2227 if they are not present.
2228 (arm_dwarf_reg_to_regnum): Add current VFP and NEON register numbers.
2229 (arm_return_value): Use arm_neon_quad_write and arm_neon_quad_read.
2230 (arm_register_name): Handle VFP single and NEON quad registers.
2231 (arm_pseudo_read, arm_pseudo_write): New functions.
2232 (arm_gdbarch_init): Check for VFP and NEON in the target description.
2233 Assign numbers to double-precision registers. Register VFP and NEON
2234 pseudo registers. Remove a shadowed "i" variable.
2235 * arm-tdep.h (enum gdb_regnum): Add ARM_D0_REGNUM and
2237 (struct gdbarch_tdep): Add have_neon_pseudos, have_neon,
2238 have_vfp_registers, have_vfp_pseudos, neon_double_type,
2241 * features/Makefile: Make expedite settings only architecture
2243 (WHICH): Add new ARM descriptions.
2244 * features/arm-with-neon.xml, features/arm-with-vfpv2.c,
2245 features/arm-with-vfpv3.c, features/arm-vfpv2.xml,
2246 features/arm-vfpv3.xml, features/arm-with-vfpv2.xml,
2247 features/arm-with-vfpv3.xml, features/arm-with-neon.c: New files.
2248 * regformats/arm-with-neon.dat, regformats/arm-with-vfpv2.dat,
2249 regformats/arm-with-vfpv3.dat: Generate.
2251 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
2253 * infrun.c (handle_inferior_event): Clear trap_expected after
2254 stepping past a single-step breakpoint.
2256 2009-07-28 Joseph Myers <joseph@codesourcery.com>
2258 * arm-tdep.c (enum arm_vfp_cprc_base_type,
2259 arm_vfp_cprc_unit_length, arm_vfp_cprc_reg_char,
2260 arm_vfp_cprc_sub_candidate, arm_vfp_call_candidate,
2261 arm_vfp_abi_for_function): New.
2262 (arm_push_dummy_call): Handle VFP ABI.
2263 (arm_extract_return_value, arm_store_return_value): Handle
2265 (arm_return_value): Handle VFP ABI.
2266 (arm_gdbarch_init): Default fp_model based on Tag_ABI_VFP_args for
2269 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
2271 * arch-utils.c (displaced_step_at_entry_point): Do not call
2272 gdbarch_convert_from_func_ptr_addr.
2273 * cris-tdep.c: Remove outdated comment.
2274 * infcall.c (call_function_by_hand): Do not call
2275 gdbarch_convert_from_func_ptr_addr after entry_point_address.
2276 * objfiles.c (entry_point_address): Call both
2277 gdbarch_convert_from_func_ptr_addr and
2278 gdbarch_addr_bits_remove.
2280 2009-07-28 Aleksandar Ristovski <aristovski@qnx.com>
2282 * nto-tdep.c (nto_thread_state_str): New array.
2283 (nto_extra_thread_info): New function definition.
2284 * nto-tdep.h (gdbthread.h): New include.
2285 (private_thread_info): New struct.
2286 (nto_extra_thread_info): New declaration.
2287 * nto-procfs.c (procfs_thread_alive): Properly check if
2288 thread is still alive.
2289 (update_thread_private_data_name, update_thread_private_data): New
2290 function definition.
2291 (procfs_find_new_threads): Fetch thread private data.
2292 (init_procfs_ops): Register to_extra_thread_info.
2294 2009-07-25 Pedro Alves <pedro@codesourcery.com>
2296 * stack.c (backtrace_command_1): Remove dead check of NULL current
2299 2009-07-23 Keith Seitz <keiths@redhat.com>
2301 * source.c (forward_search_command): Don't fclose the stream,
2302 just run the cleanups.
2303 (reverse_search_command): Likewise.
2305 2009-07-23 Paul Pluzhnikov <ppluzhnikov@google.com>
2307 * symtab.c (search_symbols): Add QUIT.
2309 2009-07-22 Paul Pluzhnikov <ppluzhnikov@google.com>
2311 * symfile.c (symbol_file_add_with_addrs_or_offsets): Call observer.
2313 2009-07-22 Paul Pluzhnikov <ppluzhnikov@google.com>
2315 * objfiles.h (objfiles_changed): New prototype.
2316 * objfiles.c (objfiles_updated_p): Rename to objfiles_changed_p.
2317 (allocate_objfile, free_objfile): Must rebuild section map.
2318 (objfile_relocate): Likewise.
2319 (update_section_map, find_pc_section): Adjust.
2320 (set_objfiles_updated_on_exe_change): Remove.
2321 (set_objfiles_updated_on_solib_activity): Remove.
2322 (_initialize_objfiles): Remove.
2323 (objfiles_changed): New function.
2324 * symfile.c (reread_symbols): Call objfiles_changed.
2326 2009-07-22 Hui Zhu <teawater@gmail.com>
2328 * record.c (record_xfer_partial): Call error When nquery
2331 2009-07-21 Paul Pluzhnikov <ppluzhnikov@google.com>
2333 * objfiles.c (objfiles_updated_p): New variable.
2334 (qsort_cmp, bsearch_cmp, update_section_map): New function.
2335 (find_pc_section): Use bsearch.
2336 (set_objfiles_updated_on_exe_change): New function.
2337 (set_objfiles_updated_on_solib_activity): New function.
2338 (_initialize_objfiles): New function.
2340 2009-07-21 Michael Eager <eager@eagercon.com>
2342 * features/rs6000/powerpc-405.xml: New.
2343 * rs6000-tdep.c: Add include & initialize for
2344 powerpc-405.c, add 405 to variants.
2345 * features/rs6000/powerpc-405.c: Generate.
2347 2009-07-21 Paul Pluzhnikov <ppluzhnikov@google.com>
2349 * utils.c (internal_vproblem): Always print failure message.
2351 2009-07-21 Daniel Jacobowitz <dan@codesourcery.com>
2352 Vladimir Prus <vladimir@codesourcery.com>
2354 * valops.c (value_fetch_lazy): Handle bitfields explicitly.
2355 (value_assign): Remove unnecessary FIXME. Honor the container
2356 type of bitfields if possible.
2357 * value.c (struct value): Add parent field.
2358 (value_parent): New function.
2359 (value_free): Free the parent also.
2360 (value_copy): Copy the parent also.
2361 (value_primitive_field): Do not read the contents of a lazy
2362 value to create a child bitfield value. Set bitpos and offset
2363 according to the container type if possible.
2364 (unpack_bits_as_long): Rename from unpack_field_as_long. Take
2365 field_type, bitpos, and bitsize instead of type and fieldno.
2366 (unpack_field_as_long): Use unpack_bits_as_long.
2367 * value.h (value_parent, unpack_bits_as_long): New prototypes.
2369 2009-07-21 Daniel Jacobowitz <dan@codesourcery.com>
2371 * value.c (struct value): Add reference_count field.
2372 (allocate_value_lazy): Initialize reference_count.
2373 (value_incref): New function.
2374 (value_free): Check the reference count.
2375 * value.h (value_incref): New prototype.
2377 2009-07-20 Marc Khouzam <marc.khouzam@ericsson.com>
2379 * utils.c (defaulted_query): Update comment and remove dead code.
2381 2009-07-20 Doug Evans <dje@google.com>
2383 Add support for "comdat types" from DWARF4.
2384 * dwarf2read.c (dwarf2_per_objfile): New member types,
2386 (TYPES_SECTION): New macro.
2387 (dwarf2_per_cu_data): Change size of length field from 30 bits
2388 to 29 bits. New member from_debug_types.
2389 (signatured_type): New struct.
2390 (struct attribute): New union member signatured_type.
2391 (DW_SIGNATURED_TYPE): New macro.
2392 (dwarf2_attr_no_follow): New function.
2393 (read_type_unit_scope): New function.
2394 (follow_die_ref_or_sig, follow_die_sig): New functions.
2395 (dwarf2_locate_sectoins): Handle .debug_types.
2396 (dwarf2_build_psymtabs): Read .debug_types.
2397 (read_type_comp_unit_head): New function.
2398 (hash_type_signature, eq_type_signature): New functions.
2399 (create_debug_types_hash_table): New function.
2400 (lookup_signatured_type): New function.
2401 (process_psymtab_comp_unit): Handle type units too.
2402 (process_type_comp_unit, build_type_psymtabs): New functions.
2403 (dwarf2_build_psymtabs_hard): Call build_type_psymtabs.
2404 (load_partial_comp_unit): Assert not called for a type unit.
2405 (skip_one_die): Handle DW_FORM_sig8.
2406 (queue_comp_unit): Don't call load_full_comp_unit here, or
2407 update read_in_chain.
2408 (psymtab_to_symtab_1): Call read_signatured_type_at_offset for
2409 type units, or load_full_comp_unit for comp units after
2410 queue_comp_unit returns.
2411 (load_full_comp_unit): Assert not called for type units.
2412 (load_full_comp_unit): Update read_in_chain here.
2413 (process_die): Handle DW_TAG_type_unit.
2414 (read_structure_type): Look for signatured types.
2415 (read_enumeration_type): Ditto.
2416 (init_cu_die_reader): Handle .debug_types.
2417 (read_comp_unit): Assert hash not computed yet.
2418 (read_die_and_children): Expand debugging printf to handle .debug_types.
2419 (read_partial_die): Handle DW_TAG_type_unit:
2420 (find_patial_die): Handle .debug_types.
2421 (read_attribute_value): Handle DW_FORM_sig8.
2422 (die_type): Call follow_die_ref_or_sig instead of follow_die_ref.
2423 (die_containing_type): Ditto.
2424 (dwarf_tag_name): Handle DW_TAG_type_unit.
2425 (dwarf_attr_name): Handle DW_AT_signature.
2426 (dwarf_form_name): Handle DW_FORM_sec_offset, DW_FORM_exprloc,
2427 DW_FORM_flag_present, DW_FORM_sig8.
2428 (dump_die_shallow): Handlel DW_FORM_sig8.
2429 (maybe_queue_comp_unit): Change return type to int from void.
2430 All callers updated.
2431 (follow_die_ref): Handle .debug_types.
2432 (lookup_signatured_type_at_offset): New function.
2433 (read_signatured_type_at_offset): New function.
2434 (read_signatured_type): New function.
2436 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
2438 * arch-utils.c (gdbarch_info_fill): Only reference GDB_OSABI_DEFAULT
2439 if the macro is defined.
2441 2009-07-20 Pedro Alves <pedro@codesourcery.com>
2443 * features/gdb-target.dtd (target): Accept an optional 'osabi'
2445 (osabi): Define element.
2446 * features/mips-linux.xml (target): Add an osabi subelement set to
2448 * regformats/regdat.sh (xmlarch, xmlosabi): New variables. Don't
2449 write the architecture into $xmltarget. Store it in $xmlarch.
2450 Handle the 'osabi' type. Handle outputting the osabi element of
2451 the target description.
2452 * regformats/reg-x86-64-linux.dat (osabi): Set to GNU/Linux.
2453 * regformats/reg-i386-linux.dat (osabi): Set to GNU/Linux.
2455 * target-descriptions.h (tdesc_osabi, set_tdesc_osabi): Declare.
2456 * target-descriptions.c (struct target_desc) <osabi>: New field.
2457 (tdesc_osabi): New function.
2458 (set_tdesc_osabi): New function.
2459 * xml-tdesc.c: Include osabi.h.
2460 (tdesc_end_osabi): New.
2461 (target_children): Parse "osabi" elements.
2462 * arch-utils.c (gdbarch_info_fill): Try to get the osabi from the
2463 target description if the user didn't override it or it is not
2464 extractable from the bfd. If that still fails, fallback to the
2465 configured in default.
2466 * osabi.h (osabi_from_tdesc_string): Declare.
2467 * osabi.c (osabi_from_tdesc_string): New.
2468 (gdbarch_lookup_osabi): Return GDB_OSABI_UNKNOWN instead of
2471 * NEWS: Mention that target descriptions can now describe the
2474 2009-07-20 Mike Frysinger <vapier@gentoo.org>
2476 * configure.ac (AC_CHECK_FUNCS): Check for pipe.
2477 * config.in, configure: Regenerate.
2478 * tui/tui-io.c (TUI_USE_PIPE_FOR_READLINE): Define if HAVE_PIPE.
2480 2009-07-20 Pedro Alves <pedro@codesourcery.com>
2482 * gnu-nat.c: Include "inf-child.h".
2483 (gnu_mourn_inferior): Use the passed in target_ops
2484 instead of the gnu_ops global.
2485 (gnu_create_inferior): Inline `attach_to_child', use the passed in
2486 target_ops instead of the gnu_ops global.
2487 (gnu_can_run): Delete.
2488 (gnu_attach): Use the passed in target_ops instead of the gnu_ops
2490 (gnu_detach): Ditto.
2491 (gnu_prepare_to_store, gnu_open): Delete.
2492 (gnu_store_registers, gnu_fetch_registers): Delete declarations.
2494 (init_gnu_ops): Delete.
2496 (_initialize_gnu_nat): Don't call init_gnu_ops or add_target here.
2497 * gnu-nat.h (gnu_target): Declare.
2498 * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Make
2500 (_initialize_i386gnu_nat): New.
2502 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
2504 * dwarf2loc.c (find_location_expression): Retrieve beginning and
2505 ending address offsets in location list entries as integers,
2508 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
2510 * infrun.c (wait_for_inferior): Invalidate registers and overlay
2511 cache every time before calling target_wait.
2512 (handle_inferior_event): Make static. Always reset waiton_ptid.
2513 Never call registers_changed.
2514 (prepare_to_wait): Do not invaliate registers or overlay cache
2515 (moved to wait_for_inferior). Do not reset waiton_ptid (moved
2516 to handle_inferior_event).
2517 (fetch_inferior_event): Remove check for always-true condition.
2519 2009-07-20 Thomas Schwinge <tschwinge@gnu.org>
2521 * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Adjust to
2522 2009-02-23 target_ops changes.
2524 2009-07-18 Michael Snyder <msnyder@vmware.com>
2526 * infrun.c (handle_inferior_event): Remove an execution_direction
2527 check in the "check for subroutine calls" test, and add some
2528 additional handling for reverse-stepping through shared libraries.
2530 2009-07-18 Anthony Green <green@moxielogic.com>
2532 * moxie-tdep.c (moxie_analyze_prologue): Take gdbarch as last
2533 parameter instead of frame_info.
2534 (moxie_frame_cache): Call moxie_analyze_prologue with different
2537 2009-07-17 Ulrich Weigand <uweigand@de.ibm.com>
2539 * solib.c (solib_bfd_open): Do not call ops->bfd_open.
2540 (solib_map_sections): Call ops->bfd_open instead of solib_bfd_open.
2541 * solib-frv.c (_initialize_frv_solib): Initialize bfd_open member.
2542 * solib-irix.c (_initialize_irix_solib): Likewise.
2543 * solib-null.c (_initialize_null_solib): Likewise.
2544 * solib-osf.c (_initialize_osf_solib): Likewise.
2545 * solib-pa64.c (_initialize_pa64_solib): Likewise.
2546 * solib-som.c (_initialize_som_solib): Likewise.
2547 * solib-sunos.c (_initialize_sunos_solib): Likewise.
2548 * solib-svr4.c (_initialize_svr4_solib): Likewise.
2549 * solib-target.c (_initialize_solib_target): Likewise.
2551 2009-07-17 Ulrich Weigand <uweigand@de.ibm.com>
2553 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Respect mixed_mode flag.
2555 2009-07-16 Doug Evans <dje@google.com>
2557 * linux-thread.db.c (try_thread_db_load_1): Tweak comment.
2559 2007-07-16 Paul Pluzhnikov <ppluzhnikov@google.com>
2561 * linux-thread-db.c (thread_db_find_new_threads_silently):
2563 (try_thread_db_load_1): Call it.
2565 2009-07-15 Doug Evans <dje@google.com>
2567 Code reorg in preparation for adding comdat types support.
2568 * dwarf2read.c (struct die_reader_specs): New struct.
2569 (locate_pdi_sibling): New arg buffer. All callers updated.
2570 (load_partial_dies, read_partial_die): Ditto.
2571 (read_8_bytes): Change return type to ULONGEST.
2572 (read_comp_unit): Delete arg abfd. All callers updated.
2573 (read_die_and_children_1): Delete args abfd, cu. New arg reader.
2574 All callers updated.
2575 (read_die_and_children, read_die_and_siblings): Ditto.
2576 (read_full_die): Ditto. Move closer to callers.
2577 (skip_one_die): New arg buffer. All callers updated.
2578 (load_full_comp_unit): Change return type to void. All callers
2580 (partial_read_comp_unit_head): New args buffer, buffer_size.
2581 All callers updated.
2582 (process_psymtab_comp_unit): New function, split out from
2583 dwarf2_build_psymtabs_hard.
2584 (dwarf2_build_psymtabs_hard): Call it.
2585 (load_partial_comp_unit): Renamed from load_comp_unit.
2586 All callers updated.
2587 (skip_children): New arg buffer. All callers updated.
2588 (init_cu_die_reader): New function.
2589 (is_ref_attr): New function.
2590 (dwarf2_get_ref_die_offset): Call it.
2591 (alloc_one_comp_unit): New function.
2593 2009-07-14 Stan Shebs <stan@codesourcery.com>
2595 * MAINTAINERS (Global Maintainers): Add Doug Evans.
2597 2009-07-14 Stan Shebs <stan@codesourcery.com>
2599 Conditional tracepoints.
2600 * ax-gdb.h (gen_eval_for_expr): Declare.
2601 * ax-gdb.c (gen_expr): Generate bytecodes for BINOP_EQUAL
2602 and other comparisons.
2603 (gen_eval_for_expr): New function.
2604 (agent_eval_command): New maintenance command.
2605 (_initialize_ax_gdb): Define the command.
2606 * remote.c (struct remote_state): New field cond_tracepoints.
2607 (PACKET_ConditionalTracepoints): New packet config type.
2608 (remote_cond_tracepoint_feature): New function.
2609 (remote_protocol_features): Add ConditionalTracepoints.
2610 (remote_supports_cond_tracepoints): New function.
2611 (_initialize_remote): Add ConditionalTracepoints.
2612 * tracepoint.c (download_tracepoint): Add conditional.
2613 * NEWS: Mention conditional tracepoints.
2615 2009-07-14 Ulrich Weigand <uweigand@de.ibm.com>
2617 * objfiles.c (objfile_relocate): Do not relocate the same
2618 BLOCKVECTOR_MAP address map multiple times.
2620 2009-07-14 Ulrich Weigand <uweigand@de.ibm.com>
2622 * remote.c (process_stop_reply): Access expedited target registers
2625 2009-07-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2627 Fix memory access from signed 32bit inferior registers on 64bit GDB.
2628 * linux-nat.c (linux_xfer_partial <TARGET_OBJECT_MEMORY>): New variable
2629 addr_bit. Mask OFFSET by the ADDR_BIT width.
2631 2009-07-13 Anthony Green <green@moxielogic.com>
2633 * moxie-tdep.c (moxie_gdbarch_init): Call
2634 set_gdbarch_process_record.
2635 (moxie_process_record): New.
2636 (moxie_process_readu): New.
2638 2009-07-12 Michael Snyder <msnyder@vmware.com>
2640 * i386-tdep.c: Add a frame unwinder for function epilogues.
2641 (i386_in_function_epilogue_p): New function.
2642 (i386_epilogue_frame_sniffer): New function.
2643 (i386_epilogue_frame_cache): New function.
2644 (i386_epilogue_frame_this_id): New function.
2645 (i386_epilogue_frame_unwind): New struct frame_unwind.
2646 (i386_gdbarch_init): Hook the new unwinder.
2648 2009-07-11 Hui Zhu <teawater@gmail.com>
2650 * cli/cli-cmds.c (disassemble_command): Add a new modifier /r
2651 to "disassemble" command to print the raw instructions in hex as
2652 well as in symbolic form.
2653 (init_cli_cmds): Ditto.
2654 (print_disassembly): Change "mixed" to "flags" to translate
2655 the behavior of disassemble.
2656 (disassemble_current_function): Ditto.
2657 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
2658 * stack.c (gdb_disassembly_stub): Ditto.
2659 * disasm.c (do_mixed_source_and_assembly): Ditto.
2660 (do_mixed_source_and_assembly): Ditto.
2661 (do_assembly_only): Ditto.
2662 (gdb_disassembly): Ditto.
2663 (dump_insns): print the raw instructions in hex as well as in
2664 symbolic form if DISASSEMBLY_RAW_INSN and flags is true.
2665 * disasm.h (DISASSEMBLY_SOURCE): Include source code with the
2666 assembly if it and flags is true.
2667 (DISASSEMBLY_RAW_INSN): Include the raw instructions in hex with
2668 the assembly if it and flags is true.
2669 (gdb_disassembly): Update extern.
2670 * NEWS: Document disassemble/r support.
2672 2009-07-10 Tom Tromey <tromey@redhat.com>
2674 * dwarf2-frame.c: Include dwarf2.h, not elf/dwarf2.h.
2675 * dwarf2expr.c: Likewise.
2676 * dwarf2loc.c: Likewise.
2677 * dwarf2read.c: Likewise.
2678 * sh-tdep.c: Likewise.
2679 * xtensa-tdep.c: Likewise.
2681 2009-07-10 Jan Kratochvil <jan.kratochvil@redhat.com>
2684 * mi/mi-cmd-var.c (mi_cmd_var_update): Remove variable nv. Move
2685 variables var, rootlist and cr to their local sub-block. Move the
2686 make_cleanup_ui_out_tuple_begin_end, make_cleanup_ui_out_list_begin_end
2687 and do_cleanups calls to the common base block. Remove the zero NV
2690 2009-07-10 Phil Muldoon <pmuldoon@redhat.com>
2692 * python/python-internal.h (apply_varobj_pretty_printer): Update
2694 (python_string_to_target_python_string): Add definition.
2695 * python/python-utils.c (unicode_to_encoded_python_string)
2696 (unicode_to_target_python_string)
2697 (python_string_to_target_python_string): New Functions.
2698 * python/python-prettyprint.c (pretty_print_one_value): Likewise.
2699 (print_string_repr): Refactor to logic to account for PyObject
2701 (apply_varobj_pretty_printer): Likewise.
2702 * python/python-value.c (valpy_string): Parse length keyword. Use
2703 length keyword in LA_GET_STRING.
2704 * varobj.c (value_get_print_value): Refactor logic to account for
2705 PyObject returned strings.
2706 * c-lang.c (c_get_string): If the length parameter is specified,
2707 use that. Return value in characters. Update comments.
2708 * language.h: Update c_get_string prototype comments.
2710 2009-07-09 Doug Evans <dje@google.com>
2712 * i386-tdep.c (i386_displaced_step_fixup): Fix order of arguments
2713 to read_memory_unsigned_integer.
2715 2009-07-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2717 Report error on inaccessible memory.
2718 * cli/cli-dump.c: Include gdbcore.h.
2719 (dump_memory_to_file): Call read_memory instead of target_read_memory.
2721 2009-07-09 Hui Zhu <teawater@gmail.com>
2723 * solib.c (solib_bfd_open): Output a warning if solib's
2724 architecture is not compatible with inferior's architecture.
2726 2009-07-09 Ulrich Weigand <uweigand@de.ibm.com>
2727 Jan Kratochvil <jan.kratochvil@redhat.com>
2729 * target.h (struct target_ops <to_thread_architecture>): Describe it.
2730 (target_thread_architecture): Refer to to_thread_architecture.
2732 2009-07-08 Pierre Muller <muller@ics.u-strasbg.fr>
2734 * cli/cli-cmds.c (init_cli_cmds): Add "inf" alias for "info" command.
2736 2009-07-07 Ulrich Weigand <uweigand@de.ibm.com>
2738 * tui/tui-stack.c (tui_make_status_line): Display PC as ?? if unknown.
2740 2009-07-07 Pierre Muller <muller@ics.u-strasbg.fr>
2742 * breakpoint.c (set_raw_breakpoint): Remove static modifier.
2744 2009-07-07 Tom Tromey <tromey@redhat.com>
2746 * c-lang.c (convert_octal): Only allow 3 octal digits.
2747 (print_wchar): Prefer 3-digit octal form. Fall back to hex if
2749 * c-exp.y (c_parse_escape): Only allow 3 octal digits.
2751 2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
2753 * python/python-value.c (valpy_getitem): Remove incorrect assert.
2755 2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
2757 * python/python-value.c (valpy_getitem): Don't return from TRY_CATCH.
2759 2009-07-07 Sami Wagiaalla <swagiaal@redhat.com>
2761 * cp-support.h (struct using_direct): Rename members inner and
2762 outer to import_src, and import_dest respectively.
2763 * cp-namespace.c (cp_add_using_directive): Update.
2764 (cp_add_using): Update.
2765 (cp_copy_usings): Update.
2766 (cp_lookup_symbol_namespace): Update.
2767 (cp_scan_for_anonymous_namespaces): Update.
2768 * cp-support.c (make_symbol_overload_list_using): Update.
2769 * cp-support.h (cp_add_using_directive, cp_add_using): Rename
2770 arguments from inner and outer to src and dest respectively.
2771 * cp-namespace.c (cp_add_using_directive): Ditto.
2772 (cp_add_using): Ditto.
2774 2009-07-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2776 * mi/mi-cmd-var.c (mi_cmd_var_update): Replace a while loop by for loop.
2777 * varobj.c (varobj_invalidate): Replace a while loop by for loop.
2779 2009-07-07 Vladimir Prus <vladimir@codesourcery.com>
2781 Fix hang in floating varobjs.
2783 * varobj.c (varobj_invalidate): Advance to next
2784 element when processing floating varobj.
2786 2009-07-07 Vladimir Prus <vladimir@codesourcery.com>
2788 * varobj.c: Remove unnecessary include.
2790 2009-07-07 Tristan Gingold <gingold@adacore.com>
2792 * config/i386/darwin.mh (NATDEPFILES): Remove excServer.o.
2793 Remove excServer.c target. Remove _all target.
2794 * darwin.defs: Removed.
2796 2009-07-06 Aleksandar Ristovski <aristovski@qnx.com>
2798 * configure.tgt (i[34567]86-*-nto*): Add build_gdbserver=yes.
2800 2009-07-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2802 * source.c (find_and_open_source): Remove the `objfile' parameter.
2803 Update the function comment.
2804 (open_source_file, symtab_to_fullname, psymtab_to_fullname): Update the
2805 find_and_open_source callers.
2807 2009-07-05 Pedro Alves <pedro@codesourcery.com>
2809 * coff-pe-read.c (read_pe_exported_syms): Recognize
2810 "pe-arm-wince-little" and "pei-arm-wince-little" bfd targets as PE
2813 2009-07-05 Pedro Alves <pedro@codesourcery.com>
2815 * arm-wince-tdep.c (arm_wince_skip_main_prologue): New.
2816 (arm_wince_init_abi): Register it as gdbarch_skip_main_prologue
2819 2009-06-29 Tristan Gingold <gingold@adacore.com>
2821 * i386-darwin-tdep.c (amd64_darwin_thread_state_reg_offset)
2822 (amd64_darwin_thread_state_num_regs)
2823 (amd64_darwin_sigcontext_addr, x86_darwin_init_abi_64): Moved to
2825 (_initialize_i386_darwin_tdep): Remove 64 bits parts.
2826 (darwin_dwarf_signal_frame_p): Make public.
2827 * amd64-darwin-tdep.c: New file with most chunks from
2829 * i386-darwin-tdep.h: Add a prototype for darwin_dwarf_signal_frame_p.
2830 (amd64_darwin_thread_state_reg_offset)
2831 (amd64_darwin_thread_state_num_regs): Moved to amd64-darwin-tdep.h
2832 * amd64-darwin-tdep.h: New file.
2833 * i386-darwin-nat.c: Only includes amd64-nat.h and amd64-darwin-tdep.h
2834 if BFD64 is defined.
2835 (i386_darwin_fetch_inferior_registers): Add #ifdef BFD64/#endif around
2837 (i386_darwin_store_inferior_registers): Ditto.
2838 (darwin_set_sstep): Ditto.
2839 (darwin_complete_target): Ditto.
2840 (amd64_darwin_sstep_at_sigreturn): Ditto.
2841 * configure.tgt: Create a separate entry for x86_64-*-darwin.
2842 Add 64 bits support for i386-*-darwin if --enable-64-bit-bfd.
2843 * Makefile.in (ALLDEPFILES): Add amd64-darwin-tdep.c, darwin-nat.c,
2844 i386-darwin-tdep.c i386-darwin-nat.c
2845 (ALL_64_TARGET_OBS): Add amd64-darwin-tdep.o
2847 2009-07-02 Pedro Alves <pedro@codesourcery.com>
2849 * linux-fork.c (forks_exist_p): Drop unnecessary extern.
2850 (add_fork, linux_fork_killall, linux_fork_mourn_inferior)
2851 (linux_fork_detach): Ditto.
2852 (delete_fork_command): Rename to ...
2853 (delete_checkpoint_command): ... this.
2854 (detach_fork_command): Rename to ...
2855 (detach_checkpoint_command): ... this.
2856 (info_forks_command): Rename to ...
2857 (info_checkpoints_command): ... this.
2858 (_initialize_linux_fork): Remove stale comments. Adjust.
2860 2009-07-02 Pedro Alves <pedro@codesourcery.com>
2862 * linux-nat.c (linux_child_follow_fork): If we're staying attached
2863 to the child process, enable event reporting on it. Don't handle
2864 checkpoints here. Instead, add the child fork to the lwp thread
2865 and inferior lists without clobbering the previous inferior. Let
2866 the thread_db layer learn about a new child process, even if
2867 following the parent.
2868 (linux_nat_switch_fork): Delete lwps of the current inferior only,
2869 instead of clearing the whole list. Use thread_change_ptid to
2870 give the core the illusion the new checkpoint is still the same
2871 inferior. Clear the register cache.
2872 (linux_handle_extended_wait): Handle checkpoints here.
2873 (linux_multi_process): Turn on.
2874 * linux-fork.c (struct fork_info) <pc>: Remove field.
2875 (init_fork_list): Do not delete the checkpoint from the inferior
2876 list (it is not there).
2877 (fork_load_infrun_state): Don't switch inferior_ptid here. Pass
2878 the new checkpoint's ptid to linux_nat_switch_fork.
2879 (fork_save_infrun_state): Make static. Don't stop the pc field of
2880 fork_info, it's gone.
2881 (linux_fork_mourn_inferior): Don't delete the checkpoint from the
2882 inferior list, it's not there.
2883 (linux_fork_detach): Ditto.
2884 (delete_fork_command): Replace mention of fork/checkpoint by
2886 (detach_fork_command): Likewise. Don't delete the checkpoint from
2888 (info_forks_command): Adjust.
2889 (restore_detach_fork): Delete.
2890 (checkpointing_pid): New.
2891 (linux_fork_checkpointing_p): New.
2892 (save_detach_fork): Delete.
2893 (checkpoint_command): Delete temp_detach_fork. Don't remove
2894 breakpoints, that's a nop. Store the pid of the process we're
2895 checkpointing, and use make_cleanup_restore_integer to restore it.
2896 Don't reinsert breakpoints here.
2897 (process_command, fork_command): Delete.
2898 (restart_command): Update comments to only mention checkpoints,
2900 (_initialize_linux_fork): Delete "fork", "process", "info forks"
2902 * linux-fork.h (fork_save_infrun_state, fork_list): Delete
2904 (linux_fork_checkpointing_p): Declare.
2905 * cli/cli-cmds.c (killlist): New.
2906 * cli/cli-cmds.h (killlist): Declare.
2907 * gdbcmd.h (killlist): Declare.
2908 * inferior.c: Include "gdbthread.h".
2909 (detach_inferior_command, kill_inferior_command)
2910 (inferior_command): New.
2911 (info_inferiors_command): Allow specifying a specific inferior id.
2912 (_initialize_inferiors): Register "inferior", "kill inferior" and
2913 "detach inferior" commands.
2914 * infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
2915 * gdbthread.h (any_thread_of_process): Declare.
2916 * thread.c (any_thread_of_process): New.
2918 * NEWS: Mention multi-inferior debugging. Mention 'info
2919 inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
2921 (Removed commands): New section, mentioning that 'info forks',
2922 'fork', 'process', 'delete fork' and 'detach fork' are now gone.
2924 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2926 * gdbarch.sh (current_gdbarch): Remove global variable.
2927 (find_arch_by_info): Remove, inline into ...
2928 (gdbarch_find_by_info): ... this. Remove current_gdbarch swapping.
2929 (deprecated_current_gdbarch_select_hack): Rename to ...
2930 (deprecated_target_gdbarch_select_hack): ... this. Do not set
2931 or access current_gdbarch.
2932 * gdbarch.c, gdbarch.h: Regenerate.
2934 * arch-utils.c (gdbarch_update_p): Update call.
2935 (set_gdbarch_from_file): Likewise.
2937 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2939 * defs.h (extract_signed_integer, extract_unsigned_integer,
2940 extract_long_unsigned_integer, store_signed_integer,
2941 store_unsigned_integer): Add BYTE_ORDER parameter.
2942 * findvar.c (extract_signed_integer, extract_unsigned_integer,
2943 extract_long_unsigned_integer, store_signed_integer,
2944 store_unsigned_integer): Add BYTE_ORDER parameter. Use it
2945 instead of current_gdbarch.
2947 * gdbcore.h (read_memory_integer, safe_read_memory_integer,
2948 read_memory_unsigned_integer, write_memory_signed_integer,
2949 write_memory_unsigned_integer): Add BYTE_ORDER parameter.
2950 * corefile.c (struct captured_read_memory_integer_arguments): Add
2952 (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
2953 struct captured_read_memory_integer_arguments.
2954 (do_captured_read_memory_integer): Pass it to read_memory_integer.
2955 (read_memory_integer): Add BYTE_ORDER parameter. Pass it to
2956 extract_signed_integer.
2957 (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
2958 extract_unsigned_integer.
2959 (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
2960 to store_signed_integer.
2961 (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
2962 to store_unsigned_integer.
2964 * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
2965 * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
2966 Pass it to extract_unsigned_integer.
2969 Update calls to extract_signed_integer, extract_unsigned_integer,
2970 extract_long_unsigned_integer, store_signed_integer,
2971 store_unsigned_integer, read_memory_integer,
2972 read_memory_unsigned_integer, safe_read_memory_integer,
2973 write_memory_signed_integer, write_memory_unsigned_integer, and
2974 get_target_memory_unsigned to pass byte order:
2975 * ada-lang.c (ada_value_binop): Update.
2976 * ada-valprint.c (char_at): Update.
2977 * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
2978 * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
2979 alpha_extract_return_value, alpha_read_insn,
2980 alpha_get_longjmp_target): Update.
2981 * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
2982 * amd64obsd-tdep.c (amd64obsd_supply_uthread,
2983 amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
2984 * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
2985 amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
2986 amd64_displaced_step_fixup): Update.
2987 * arm-linux-tdep.c (arm_linux_sigreturn_init,
2988 arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
2989 * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
2990 arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
2991 arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
2992 arm_return_value): Update.
2993 * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
2994 * auxv.c (default_auxv_parse): Update.
2995 * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
2996 avr_scan_prologue, avr_extract_return_value,
2997 avr_frame_prev_register, avr_push_dummy_call): Update.
2998 * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
2999 bsd_uthread_wait, bsd_uthread_thread_alive,
3000 bsd_uthread_extra_thread_info): Update.
3001 * c-lang.c (c_printstr, print_wchar): Update.
3002 * cp-valprint.c (cp_print_class_member): Update.
3003 * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
3004 cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
3005 cris_extract_return_value, find_step_target, dip_prefix,
3006 sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
3007 move_mem_to_reg_movem_op, get_data_from_address): Update.
3008 * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
3009 * dwarf2-frame.c (execute_cfa_program): Update.
3010 * dwarf2loc.c (find_location_expression): Update.
3011 * dwarf2read.c (dwarf2_const_value): Update.
3012 * expprint.c (print_subexp_standard): Update.
3013 * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
3014 unsigned_address_to_pointer, address_to_signed_pointer,
3015 read_var_value): Update.
3016 * frame.c (frame_unwind_register_signed,
3017 frame_unwind_register_unsigned, get_frame_memory_signed,
3018 get_frame_memory_unsigned): Update.
3019 * frame-unwind.c (frame_unwind_got_constant): Update.
3020 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
3021 frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
3023 * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
3024 frv_extract_return_value, find_func_descr,
3025 frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
3026 * f-valprint.c (f_val_print): Update.
3027 * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
3029 * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
3030 h8300_push_dummy_call, h8300_extract_return_value,
3031 h8300h_extract_return_value, h8300_store_return_value,
3032 h8300h_store_return_value): Update.
3033 * hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
3034 * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
3036 * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
3037 hppa64_hpux_in_solib_call_trampoline,
3038 hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
3039 hppa_hpux_sigtramp_frame_unwind_cache,
3040 hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
3041 hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
3042 hppa32_hpux_search_dummy_call_sequence,
3043 hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
3044 hppa_hpux_unwind_adjust_stub): Update.
3045 * hppa-linux-tdep.c (insns_match_pattern,
3046 hppa_linux_find_global_pointer): Update.
3047 * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
3048 hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
3049 skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
3050 hppa_pseudo_register_read, hppa_frame_prev_register_helper,
3051 hppa_match_insns): Update.
3052 * hpux-thread.c (hpux_thread_fetch_registers): Update.
3053 * i386-tdep.c (i386bsd_sigcontext_addr): Update.
3054 * i386-cygwin-tdep.c (core_process_module_section): Update.
3055 * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
3056 amd64_darwin_sstep_at_sigreturn): Update.
3057 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
3058 amd64_darwin_sigcontext_addr): Likewise.
3059 * i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
3060 * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
3061 * i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
3062 * i386obsd-nat.c (i386obsd_supply_pcb): Update.
3063 * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
3064 i386obsd_trapframe_cache): Update.
3065 * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
3066 i386_analyze_frame_setup, i386_analyze_prologue,
3067 i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
3068 i386_get_longjmp_target, i386_push_dummy_call,
3069 i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
3070 i386_fetch_pointer_argument): Update.
3071 * i387-tdep.c (i387_supply_fsave): Update.
3072 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
3073 * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
3074 examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
3075 ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
3076 ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
3077 ia64_libunwind_frame_prev_register,
3078 ia64_libunwind_sigtramp_frame_this_id,
3079 ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
3080 find_extant_func_descr, find_func_descr,
3081 ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
3082 ia64_unwind_pc): Update.
3083 * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
3084 iq2000_scan_prologue, iq2000_extract_return_value,
3085 iq2000_push_dummy_call): Update.
3086 * irix5nat.c (fill_gregset): Update.
3087 * jv-lang.c (evaluate_subexp_java): Update.
3088 * jv-valprint.c (java_value_print): Update.
3089 * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
3090 lm32_extract_return_value, lm32_store_return_value): Update.
3091 * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
3092 m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
3093 m32c_m16c_pointer_to_address): Update.
3094 * m32r-tdep.c (m32r_store_return_value, decode_prologue,
3095 m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
3097 * m68hc11-tdep.c (m68hc11_pseudo_register_read,
3098 m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
3099 m68hc11_push_dummy_call): Update.
3100 * m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
3101 m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
3103 * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
3104 m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
3105 m68k_get_longjmp_target): Update.
3106 * m88k-tdep.c (m88k_fetch_instruction): Update.
3107 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
3108 mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
3109 * mi/mi-main.c (mi_cmd_data_write_memory): Update.
3110 * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
3111 mips64_linux_get_longjmp_target, mips64_fill_gregset,
3112 mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
3113 * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
3114 * mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
3115 mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
3116 mips_o32_push_dummy_call, mips_o64_push_dummy_call,
3117 mips_single_step_through_delay, mips_skip_pic_trampoline_code,
3118 mips_integer_to_address): Update.
3119 * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
3121 * monitor.c (monitor_supply_register, monitor_write_memory,
3122 monitor_read_memory_single): Update.
3123 * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
3124 moxie_analyze_prologue): Update.
3125 * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
3126 mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
3127 mt_push_dummy_call): Update.
3128 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
3129 read_objc_methlist_method, read_objc_object, read_objc_super,
3130 read_objc_class, find_implementation_from_class): Update.
3131 * ppc64-linux-tdep.c (ppc64_desc_entry_point,
3132 ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
3134 * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
3135 ppcobsd_sigtramp_frame_cache): Update.
3136 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
3137 do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
3138 ppc64_sysv_abi_return_value): Update.
3139 * ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
3140 * procfs.c (procfs_auxv_parse): Update.
3141 * p-valprint.c (pascal_val_print): Update.
3142 * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
3143 regcache_raw_write_signed, regcache_raw_write_unsigned,
3144 regcache_cooked_read_signed, regcache_cooked_read_unsigned,
3145 regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
3146 * remote-m32r-sdi.c (m32r_fetch_register): Update.
3147 * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
3149 * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
3150 rs6000_convert_from_func_ptr_addr, branch_dest,
3151 rs6000_software_single_step): Update.
3152 * rs6000-tdep.c (rs6000_in_function_epilogue_p,
3153 ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
3154 bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
3155 rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
3156 rs6000_frame_cache): Update.
3157 * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
3158 s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
3159 s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
3160 extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
3161 * scm-exp.c (scm_lreadr): Update.
3162 * scm-lang.c (scm_get_field, scm_unpack): Update.
3163 * scm-valprint.c (scm_val_print): Update.
3164 * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
3165 score_fetch_inst): Update.
3166 * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
3167 sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
3168 sh64_pseudo_register_read, sh64_pseudo_register_write,
3169 sh64_frame_prev_register): Update:
3170 * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
3171 sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
3172 sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
3173 * solib-darwin.c (darwin_load_image_infos): Update.
3174 * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
3175 find_canonical_descriptor_in_load_object): Update.
3176 * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
3177 irix_open_symbol_file_object): Update.
3178 * solib-som.c (som_solib_create_inferior_hook, link_map_start,
3179 som_current_sos, som_open_symbol_file_object): Update.
3180 * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
3182 * solib-svr4.c (read_program_header, scan_dyntag_auxv,
3183 solib_svr4_r_ldsomap): Update.
3184 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
3185 * sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
3186 sparc64obsd_collect_uthread): Update.
3187 * sparc64-tdep.c (sparc64_pseudo_register_read,
3188 sparc64_pseudo_register_write, sparc64_supply_gregset,
3189 sparc64_collect_gregset): Update.
3190 * sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
3191 * sparcobsd-tdep.c (sparc32obsd_supply_uthread,
3192 sparc32obsd_collect_uthread): Update.
3193 * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
3194 sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
3195 sparc_collect_rwindow): Update.
3196 * spu-linux-nat.c (parse_spufs_run): Update.
3197 * spu-tdep.c (spu_pseudo_register_read_spu,
3198 spu_pseudo_register_write_spu, spu_pointer_to_address,
3199 spu_analyze_prologue, spu_in_function_epilogue_p,
3200 spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
3201 spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
3202 info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
3203 info_spu_dma_command, info_spu_proxydma_command): Update.
3204 * stack.c (print_frame_nameless_args, frame_info): Update.
3205 * symfile.c (read_target_long_array, simple_read_overlay_table,
3206 simple_read_overlay_region_table): Update.
3207 * target.c (debug_print_register): Update.
3208 * tramp-frame.c (tramp_frame_start): Update.
3209 * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
3210 v850_extract_return_value, v850_store_return_value,
3211 * valarith.c (value_binop, value_bit_index): Update.
3212 * valops.c (value_cast): Update.
3213 * valprint.c (val_print_type_code_int, val_print_string,
3214 read_string): Update.
3215 * value.c (unpack_long, unpack_double, unpack_field_as_long,
3216 modify_field, pack_long): Update.
3217 * vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
3218 vax_skip_prologue): Update.
3219 * xstormy16-tdep.c (xstormy16_push_dummy_call,
3220 xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
3221 xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
3222 xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
3223 * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
3224 xtensa_pseudo_register_write, xtensa_frame_cache,
3225 xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
3228 * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
3229 decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
3230 BYTE_ORDER parameter.
3231 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
3233 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
3234 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
3235 * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
3236 instead of current_gdbarch.
3237 (decimal_to_string, decimal_from_integral, decimal_from_floating,
3238 decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
3239 Pass it to match_endianness.
3240 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
3241 parameters. Pass them to match_endianness.
3242 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
3243 Pass them to match_endianness.
3244 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
3245 Pass them to match_endianness.
3246 * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
3247 BYTE_ORDER_Y output parameters.
3248 (value_binop): Update call to value_args_as_decimal.
3250 Update calls to decimal_to_string, decimal_from_string,
3251 decimal_from_integral, decimal_from_floating, decimal_to_doublest,
3252 decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
3253 to pass/receive byte order:
3254 * c-exp.y (parse_number): Update.
3255 * printcmd.c (printf_command): Update.
3256 * valarith.c (value_args_as_decimal, value_binop, value_logical_not,
3257 value_equal, value_less): Update.
3258 * valops.c (value_cast, value_one): Update.
3259 * valprint.c (print_decimal_floating): Update.
3260 * value.c (unpack_long, unpack_double): Update.
3261 * python/python-value.c (valpy_nonzero): Update.
3264 * ada-valprint.c (char_at): Add BYTE_ORDER parameter.
3265 (printstr): Update calls to char_at.
3266 (ada_val_print_array): Likewise.
3267 * valprint.c (read_string): Add BYTE_ORDER parameter.
3268 (val_print_string): Update call to read_string.
3269 * c-lang.c (c_get_string): Likewise.
3270 * charset.h (target_wide_charset): Add BYTE_ORDER parameter.
3271 * charset.c (target_wide_charset): Add BYTE_ORDER parameter.
3272 Use it instead of current_gdbarch.
3273 * printcmd.c (printf_command): Update calls to target_wide_charset.
3274 * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
3275 Pass to target_wide_charset. Use it instead of current_gdbarch.
3276 (classify_type): Add BYTE_ORDER parameter. Pass to
3277 charset_for_string_type. Allow NULL encoding pointer.
3278 (print_wchar): Add BYTE_ORDER parameter.
3279 (c_emit_char): Update calls to classify_type and print_wchar.
3280 (c_printchar, c_printstr): Likewise.
3283 * gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
3284 * gdbarch.c, gdbarch.h: Regenerate.
3285 * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
3287 * arch-utils.c (generic_in_solib_return_trampoline): Likewise.
3288 * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
3289 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
3290 (rs6000_skip_trampoline_code): Update call.
3292 * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
3293 dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
3294 (alpha_read_insn): Add GDBARCH parameter.
3295 * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
3296 (alpha_register_to_value): Pass architecture to alpha_sts.
3297 (alpha_extract_return_value): Likewise.
3298 (alpha_value_to_register): Pass architecture to alpha_lds.
3299 (alpha_store_return_value): Likewise.
3300 (alpha_read_insn): Add GDBARCH parameter.
3301 (alpha_skip_prologue): Pass architecture to alpha_read_insn.
3302 (alpha_heuristic_proc_start): Likewise.
3303 (alpha_heuristic_frame_unwind_cache): Likewise.
3304 (alpha_next_pc): Likewise.
3305 (alpha_sigtramp_frame_this_id): Pass architecture to
3306 tdep->dynamic_sigtramp_offset callback.
3307 (alpha_sigtramp_frame_sniffer): Pass architecture to
3308 tdep->pc_in_sigtramp callback.
3309 * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
3310 (alphafbsd_sigtramp_offset): Likewise.
3311 * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
3312 parameter. Pass to alpha_read_insn.
3313 (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
3314 alpha_linux_sigtramp_offset_1.
3315 (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
3316 alpha_linux_sigtramp_offset.
3317 (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
3318 and alpha_linux_sigtramp_offset.
3319 * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
3320 (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
3321 alphanbsd_sigtramp_offset.
3322 * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
3323 (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
3325 (alphaobsd_sigcontext_addr): Pass architecture to
3326 alphaobsd_sigtramp_offset.
3327 * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
3330 * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
3331 (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
3332 (amd64_frame_cache): Likewise.
3334 * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
3335 (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
3336 thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
3337 * arm-wince-tdep.c: Include "frame.h".
3339 * avr-tdep.c (EXTRACT_INSN): Remove.
3340 (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
3341 (avr_skip_prologue): Pass architecture to avr_scan_prologue.
3342 (avr_frame_unwind_cache): Likewise.
3344 * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
3345 (find_step_target): Initialize it.
3346 (get_data_from_address): Add BYTE_ORDER parameter.
3347 (bdap_prefix): Pass byte order to get_data_from_address.
3348 (handle_prefix_assign_mode_for_aritm_op): Likewise.
3349 (three_operand_add_sub_cmp_and_or_op): Likewise.
3350 (handle_inc_and_index_mode_for_aritm_op): Likewise.
3352 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
3353 (frv_linux_sigcontext_reg_addr): Pass architecture to
3354 frv_linux_pc_in_sigtramp.
3355 (frv_linux_sigtramp_frame_sniffer): Likewise.
3357 * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
3358 (h8300_analyze_prologue): Add GDBARCH parameter. Pass to
3359 h8300_is_argument_spill.
3360 (h8300_frame_cache, h8300_skip_prologue): Pass architecture
3361 to h8300_analyze_prologue.
3363 * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
3364 in_solib_call_trampoline callback.
3365 (hppa_in_solib_call_trampoline): Add GDBARCH parameter.
3366 * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
3368 (hppa64_push_dummy_call): Pass architecture to
3369 hppa64_convert_code_addr_to_fptr.
3370 (hppa_match_insns): Add GDBARCH parameter.
3371 (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
3373 (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
3374 (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
3375 hppa_match_insns_relaxed.
3376 (hppa_stub_unwind_sniffer): Pass architecture to
3377 tdep->in_solib_call_trampoline callback.
3378 * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
3379 (hppa32_hpux_search_dummy_call_sequence): Pass architecture to
3380 hppa_hpux_search_pattern.
3381 * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
3382 (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
3383 Pass to insns_match_pattern.
3384 (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
3385 hppa_linux_sigtramp_find_sigcontext.
3386 (hppa_linux_sigtramp_frame_sniffer): Likewise.
3387 (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
3388 (hppa64_hpux_in_solib_call_trampoline): Likewise.
3390 * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
3391 (i386_analyze_frame_setup): Add GDBARCH parameter.
3392 (i386_analyze_prologue): Add GDBARCH parameter. Pass to
3393 i386_follow_jump and i386_analyze_frame_setup.
3394 (i386_skip_prologue): Pass architecture to i386_analyze_prologue
3395 and i386_follow_jump.
3396 (i386_frame_cache): Pass architecture to i386_analyze_prologue.
3397 (i386_pe_skip_trampoline_code): Add FRAME parameter.
3398 * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
3399 * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
3400 frame to i386_pe_skip_trampoline_code.
3402 * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
3403 to sigcontext_register_address callback.
3404 * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
3405 (ia64_find_unwind_table): Pass architecture to
3406 ia64_find_global_pointer.
3407 (find_extant_func_descr): Add GDBARCH parameter.
3408 (find_func_descr): Pass architecture to find_extant_func_descr
3409 and ia64_find_global_pointer.
3410 (ia64_sigtramp_frame_init_saved_regs): Pass architecture to
3411 tdep->sigcontext_register_address callback.
3412 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
3415 * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
3416 (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
3418 * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
3419 (lm32_skip_prologue, lm32_frame_cache): Pass architecture to
3420 lm32_analyze_prologue.
3422 * m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
3423 (m32r_skip_prologue): Pass architecture to decode_prologue.
3425 * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
3426 (m68hc11_scan_prologue): Pass architecture to
3427 m68hc11_analyze_instruction.
3429 * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
3430 (m68k_analyze_prologue): Pass architecture to
3431 m68k_analyze_frame_setup.
3433 * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
3434 (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
3435 to m88k_fetch_instruction.
3436 (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
3437 (m88k_frame_cache): Likewise.
3439 * mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
3440 (mep_analyze_prologue): Pass architecture to mep_get_insn.
3442 * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
3443 (mips32_next_pc): Pass architecture to mips_fetch_instruction.
3444 (deal_with_atomic_sequence): Likewise.
3445 (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
3446 (mips16_scan_prologue): Likewise.
3447 (mips32_scan_prologue): Likewise.
3448 (mips16_in_function_epilogue_p): Likewise.
3449 (mips32_in_function_epilogue_p): Likewise.
3450 (mips_about_to_return): Likewise.
3451 (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
3452 (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
3453 (mips_skip_prologue): Pass architecture to mips16_scan_prologue
3454 and mips32_scan_prologue.
3455 (mips_in_function_epilogue_p): Pass architecture to
3456 mips16_in_function_epilogue_p and
3457 mips32_in_function_epilogue_p.
3458 (heuristic_proc_start): Pass architecture to mips_fetch_instruction
3459 and mips_about_to_return.
3460 (mips_skip_mips16_trampoline_code): Pass architecture to
3461 mips_fetch_instruction.
3462 (fetch_mips_16): Add GDBARCH parameter.
3463 (mips16_next_pc): Pass architecture to fetch_mips_16.
3464 (extended_mips16_next_pc): Pass architecture to unpack_mips16 and
3467 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
3468 read_objc_methlist_method, read_objc_object, read_objc_super,
3469 read_objc_class): Add GDBARCH parameter.
3470 (find_implementation_from_class): Add GDBARCH parameter, pass
3471 to read_objc_class, read_objc_methlist_nmethods, and
3472 read_objc_methlist_method.
3473 (find_implementation): Add GDBARCH parameter, pass to
3474 read_objc_object and find_implementation_from_class.
3475 (resolve_msgsend, resolve_msgsend_stret): Pass architecture
3476 to find_implementation.
3477 (resolve_msgsend_super, resolve_msgsend_super_stret): Pass
3478 architecture to read_objc_super and find_implementation_from_class.
3480 * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
3481 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
3482 ppc64_standard_linkage3_target): Pass architecture to
3483 ppc64_desc_entry_point.
3484 * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
3485 (skip_prologue): Pass byte order to bl_to_blrl_insn_p.
3486 (rs6000_fetch_instruction): Add GDBARCH parameter.
3487 (rs6000_skip_stack_check): Add GDBARCH parameter, pass to
3488 rs6000_fetch_instruction.
3489 (skip_prologue): Pass architecture to rs6000_fetch_instruction.
3491 * remote-mips.c (mips_store_word): Return old_contents as host
3492 integer value instead of target bytes.
3494 * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
3495 (s390_analyze_prologue): Initialize it.
3496 (extend_simple_arg): Add GDBARCH parameter.
3497 (s390_push_dummy_call): Pass architecture to extend_simple_arg.
3499 * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
3500 * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
3501 (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
3502 * scm-valprint.c (scm_scmval_print): Likewise.
3503 (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
3506 * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
3507 (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
3508 look_for_args_moves.
3509 (sh64_skip_prologue): Pass architecture to
3510 sh64_skip_prologue_hard_way.
3511 * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
3512 (sh_skip_prologue): Pass architecture to sh_analyze_prologue.
3513 (sh_frame_cache): Likewise.
3515 * solib-irix.c (extract_mips_address): Add GDBARCH parameter.
3516 (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
3517 Pass architecture to extract_mips_address.
3519 * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
3520 * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
3521 (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
3522 to sparc_fetch_wcookie.
3523 (sparc32_frame_prev_register): Likewise.
3524 * sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
3525 * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
3526 * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
3528 * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
3529 (spu_skip_prologue): Pass architecture to spu_analyze_prologue.
3530 (spu_virtual_frame_pointer): Likewise.
3531 (spu_frame_unwind_cache): Likewise.
3532 (info_spu_mailbox_list): Add BYTE_ORER parameter.
3533 (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
3534 (info_spu_dma_cmdlist): Add BYTE_ORER parameter.
3535 (info_spu_dma_command, info_spu_proxydma_command): Pass byte order
3536 to info_spu_dma_cmdlist.
3538 * symfile.c (read_target_long_array): Add GDBARCH parameter.
3539 (simple_read_overlay_table, simple_read_overlay_region_table,
3540 simple_overlay_update_1): Pass architecture to read_target_long_array.
3542 * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
3543 (v850_frame_cache): Pass architecture to v850_analyze_prologue.
3545 * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
3547 (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
3548 to xstormy16_analyze_prologue.
3549 (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
3550 (xstormy16_find_jmp_table_entry): Likewise.
3551 (xstormy16_skip_trampoline_code): Pass architecture to
3552 xstormy16_resolve_jmp_table_entry.
3553 (xstormy16_pointer_to_address): Likewise.
3554 (xstormy16_address_to_pointer): Pass architecture to
3555 xstormy16_find_jmp_table_entry.
3557 * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
3558 (call0_analyze_prologue): Add GDBARCH parameter, pass to
3560 (call0_frame_cache): Pass architecture to call0_analyze_prologue.
3561 (xtensa_skip_prologue): Likewise.
3563 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3565 * defs.h (strlen_paddr, paddr, paddr_nz): Remove.
3566 (paddress): Add GDBARCH parameter.
3567 * utils.c (strlen_paddr, paddr, paddr_nz): Remove.
3568 (paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
3569 * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
3570 * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
3571 use it instead of current_gdbarch.
3573 Update calls to ui_out_field_core_addr to pass architecture:
3574 * ada-lang.c (print_one_exception): Update.
3575 * breakpoint.c (print_one_breakpoint_location,
3576 print_one_exception_catchpoint): Update.
3577 * disasm.c (dump_insns): Update.
3578 * darwin-nat-info.c (darwin_debug_regions_recurse): Update.
3579 * mi/mi-main.c (mi_cmd_data_read_memory): Update.
3580 * mi/mi-symbol-cmds.c: Include "objfiles.h".
3581 (mi_cmd_symbol_list_lines): Update.
3582 * stack.c (print_frame_info, print_frame): Update.
3584 Update callers of paddress to pass architecture:
3585 * ada-tasks.c (info_task): Update.
3586 * ada-valprint.c (ada_val_print_1): Update.
3587 * annotate.c (annotate_source, annotate_frame_begin): Update.
3588 * breakpoint.c (insert_bp_location, describe_other_breakpoints,
3590 * cli/cli-cmds.c (edit_command, list_command, print_disassembly):
3592 * corefile.c (memory_error): Update.
3593 * c-valprint.c (print_function_pointer_address, c_val_print): Update.
3594 * disasm.c (dis_asm_print_address): Update.
3595 * exec.c (print_section_info): Update.
3596 * f-valprint.c (f_val_print): Update.
3597 * infcmd.c: Include "arch-utils.h".
3598 (jump_command, program_info): Update.
3599 * linux-fork.c: Include "arch-utils.h".
3600 (info_forks_command): Update.
3601 * m2-valprint.c (print_function_pointer_address,
3602 print_unpacked_pointer, print_variable_at_address,
3603 m2_val_print): Update.
3604 * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
3606 * printcmd.c (print_address, print_address_demangle, address_info):
3608 * p-valprint.c (pascal_val_print): Update.
3609 * source.c: Include "arch-utils.h".
3610 (line_info): Update.
3611 * stack.c (frame_info, print_block_frame_labels): Update.
3612 * symfile.c (add_symbol_file_command, list_overlays_command): Update.
3613 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
3614 print_symbol, print_partial_symbols, maintenance_info_psymtabs,
3615 maintenance_check_symtabs): Update.
3616 * symtab.c (find_pc_sect_symtab): Update.
3617 * target.c (deprecated_debug_xfer_memory): Update.
3618 * tracepoint.c (scope_info): Update.
3619 * tui/tui-stack.c (tui_make_status_line): Update.
3620 * valprint.c (val_print_string): Update.
3622 Update callers of paddr_nz to use paddress instead (keeping
3623 user-visible output identical):
3624 * alpha-tdep.c (alpha_heuristic_proc_start): Update.
3625 * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
3626 amd64_displaced_step_fixup): Update.
3627 * arch-utils.c (simple_displaced_step_copy_insn): Update.
3628 * auxv.c (fprint_target_auxv): Update.
3629 * breakpoint.c (insert_single_step_breakpoint): Update.
3630 * buildsym.c (finish_block): Update.
3631 * cli/cli-dump.c (restore_section_callback): Update.
3632 * fbsd-nat.c (fbsd_find_memory_regions): Update.
3633 * frame.c (frame_unwind_register_value): Update.
3634 * gcore.c (gcore_create_callback): Update.
3635 * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
3636 * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
3637 i386_record_lea_modrm_addr, i386_record_lea_modrm,
3638 i386_process_record): Update.
3639 * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
3640 ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
3641 ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
3642 * infrun.c (displaced_step_prepare, displaced_step_fixup,
3643 handle_inferior_event, insert_step_resume_breakpoint_at_sal,
3644 insert_longjmp_resume_breakpoint): Update.
3645 * linux-nat.c (linux_nat_find_memory_regions): Update.
3646 * linux-record.c (record_linux_system_call): Update.
3647 * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
3648 mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
3649 mips_o64_push_dummy_call): Update.
3650 * monitor.c (monitor_error, monitor_remove_breakpoint): Update.
3651 * record.c (record_arch_list_add_mem, record_wait,
3652 record_xfer_partial): Update.
3653 * remote-mips.c (mips_fetch_word, mips_check_lsi_error,
3654 mips_common_breakpoint): Update.
3655 * remote-sim.c (gdbsim_xfer_inferior_memory): Update.
3656 * rs6000-tdep.c (ppc_displaced_step_fixup): Update.
3657 * solib-som.c (som_current_sos): Update.
3658 * symfile.c (load_progress, generic_load): Update.
3659 * symfile-mem.c (add_vsyscall_page): Update.
3660 * valops.c (value_fetch_lazy): Update.
3661 * windows-tdep.c (windows_xfer_shared_library): Update.
3663 Update callers of paddr_nz to use paddress instead (changing
3664 user-visible output to make it more correct):
3665 * dwarf2loc.c (locexpr_describe_location): Update.
3666 * ia64-tdep.c (ia64_memory_insert_breakpoint,
3667 ia64_memory_remove_breakpoint): Update.
3668 * jv-valprint.c (java_value_print): Update.
3669 * m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
3670 * monitor.c (monitor_read_memory): Update.
3672 Update callers of paddr to use paddress instead (changing
3673 user-visible output to make it more correct):
3674 * arm-tdep.c (arm_push_dummy_call): Update.
3675 * breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
3676 create_breakpoint): Update.
3677 * darwin-nat-info.c (darwin_debug_regions): Update.
3678 * dcache.c (dcache_info): Update.
3679 * dsrec.c (load_srec, make_srec): Update.
3680 * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
3681 dwarf2_frame_cache): Update.
3682 * gcore.c (gcore_copy_callback): Update.
3683 * gnu-nat.c (gnu_xfer_memory): Update.
3684 * mips-linux-nat.c (mips_show_dr): Update.
3685 * monitor.c (monitor_write_memory, monitor_insert_breakpoint,
3686 monitor_remove_breakpoint): Update.
3687 * remote.c (compare_sections_command): Update.
3688 * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
3689 m32r_remove_breakpoint, m32r_insert_watchpoint,
3690 m32r_remove_watchpoint): Update.
3691 * sol-thread.c (info_cb): Update.
3692 * symfile.c (load_progress): Update.
3694 Update callers of paddress or paddr_nz to use hex_string instead
3695 (changes output of internal/error/debug messages only):
3696 * dwarf2read.c (dump_die_shallow): Update.
3697 * frame.c (fprint_field, fprint_frame, frame_pc_unwind,
3698 get_frame_func, create_new_frame): Update.
3699 * hppa-tdep.c (find_unwind_entry, unwind_command): Update.
3700 * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
3701 ia64_get_dyn_info_list): Update.
3702 * maint.c (maintenance_translate_address): Update.
3703 * mi/mi-cmd-var.c (mi_cmd_var_create): Update.
3704 * target.c (target_flash_erase): Update.
3706 Update callers of paddr/paddr_nz to use phex/phex_nz instead,
3707 using an appropriate address size. Remove use of strlen_paddr.
3708 * exec.c (exec_files_info): Update.
3709 * i386-nat.c (i386_show_dr): Update.
3710 * remote.c (remote_flash_erase): Update.
3711 * m32r-rom.c (m32r_load_section): Update.
3712 * monitor.c (monitor_vsprintf, monitor_store_register): Update.
3713 * remote.c (remote_check_symbols, remote_search_memory): Update.
3714 * remote-mips.c (mips_request, mips_common_breakpoint): Update.
3715 * scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
3716 * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
3717 * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
3718 sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
3719 sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
3720 sh_dsp_show_regs): Update.
3721 * xcoffsolib.c (sharedlibrary_command): Update.
3724 * maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
3725 Use hex_string_custom instead of paddr.
3726 (print_bfd_section_info): Pass address size.
3727 (print_objfile_section_info): Likewise.
3729 * annotate.h (annotate_source): Add GDBARCH parameter.
3730 (annotate_frame_begin): Likewise.
3731 * annotate.c (annotate_source): Add GDBARCH parameter.
3732 (annotate_frame_begin): Likewise.
3733 * source.c (identify_source_line): Update call to annotate_source.
3734 * stack.c (print_frame_info, print_frame): Update call to
3735 annotate_frame_begin.
3737 * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
3738 (create_breakpoint, create_ada_exception_breakpoint): Update call.
3740 * stack.c (print_block_frame_labels): Add GDBARCH parameter.
3741 (print_frame_label_vars): Update call.
3743 * symmisc.c (print_partial_symbols): Add GDBARCH parameter.
3744 (dump_psymtab): Update call to print_partial_symbols.
3745 (struct print_symbol_args): Add GDBARCH member.
3746 (dump_symtab_1): Set print_symbol_args architecture member.
3747 (print_symbol): Use it.
3749 * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
3751 * windows-tdep.c (windows_xfer_shared_library): Likewise.
3752 * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
3753 (core_process_module_section): Pass architecture from cpms_data to
3754 windows_xfer_shared_library.
3755 (windows_core_xfer_shared_libraries): Initialize cmps_data
3756 architecture member.
3757 * windows-nat.c (windows_xfer_shared_libraries): Pass architecture
3758 to windows_xfer_shared_library.
3760 * defs.h (print_address): Add GDBARCH parameter.
3761 * printcmd.c (print_address): Add GDBARCH parameter.
3762 (print_scalar_formatted, do_examine): Update call.
3763 * findcmd.c (find_command): Update call.
3764 * tracepoint.c: Include "arch-utils.h".
3765 (trace_find_line_command): Update call.
3766 * tui/tui-disasm.c (tui_disassemble): Update call.
3768 * value.h (print_address_demangle): Add GDBARCH parameter.
3769 * printcmd.c (print_address_demangle): Add GDBARCH parameter.
3770 * c-valprint.c (print_function_pointer_address, c_val_print):
3772 * f-valprint.c (f_val_print): Update call.
3773 * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
3774 * jv-valprint.c (java_val_print): Update call.
3775 * m2-valprint.c (print_function_pointer_address, m2_val_print):
3777 * p-valprint.c (pascal_val_print): Update call.
3779 * disasm.c (gdb_disassemble_info): Install architecture into
3780 di.application_data field.
3782 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3784 * disasm.h (gdb_disassembly): Add GDBARCH parameter.
3785 (gdb_print_insn): Likewise.
3786 * disasm.c (dump_insns): Add GDBARCH parameter. Use it instead
3788 (do_mixed_source_and_assembly): Add GDBARCH parameter. Pass to
3790 (do_assembly_only): Likewise.
3791 (gdb_disassembly): Add GDBARCH parameter. Use it instead of
3792 current_gdbarch. Pass to subroutines.
3793 (gdb_print_insn): Add GDBARCH parameter. Use it instead of
3796 * stack.c (struct gdb_disassembly_stub_args): Add GDBARCH member.
3797 (gdb_disassembly_stub): Pass architecture to gdb_disassembly.
3798 (do_gdb_disassembly): Add GDBARCH argument. Store into args.
3799 (print_frame_info): Pass architecture to do_gdb_disassembly.
3801 * printcmd.c (print_formatted): Pass architecture to gdb_print_insn.
3803 * mi/mi-cmd-disas.c: Include "arch-utils.h"
3804 (mi_cmd_disassemble): Pass architecture to gdb_disassembly.
3806 * cli/cli-cmds.c: Include "arch-utils.h".
3807 (print_disassembly): Add GDBARCH parameter. Pass to gdb_disassembly
3808 and tui_show_assembly.
3809 (disassemble_current_function): Pass architecture to
3810 tui_get_low_disassembly_address and print_disassembly.
3811 (disassemble_command): Pass architecture to
3812 tui_get_low_disassembly_address and print_disassembly.
3814 * tui/tui.c (tui_show_assembly): Add GDBARCH parameter. Pass to
3815 tui_update_source_windows_with_addr.
3817 * tui/tui-data.h (struct tui_locator_element): Add GDBARCH member.
3818 (struct tui_source_info): Likewise.
3819 * tui/tui-data.c (tui_clear_win_detail): Clear source_info.gdbarch.
3821 * tui/tui-disasm.c (tui_disassemble): Add GDBARCH parameter.
3822 Pass to gdb_print_insn.
3823 (tui_find_disassembly_address): Add GDBARCH parameter. Pass to
3825 (tui_set_disassem_content): Add GDBARCH parameter. Install into
3826 source_info.gdbarch. Pass to tui_disassemble.
3827 (tui_show_disassem): Add GDBARCH parameter. Pass to
3828 tui_update_source_window.
3829 (tui_show_disassem_and_update_source): Add GDBARCH parameter. Pass to
3830 tui_show_disassem and tui_update_source_window.
3832 (tui_get_begin_asm_address): Return locator architecture in addition
3833 to locator PC value.
3835 (tui_get_low_disassembly_address): Add GDBARCH parameter. Pass to
3836 tui_get_low_disassembly_address.
3838 (tui_vertical_disassem_scroll): Pass architecture to subroutines.
3840 * tui/tui-disasm.h (tui_set_disassem_content): Add GDBARCH parameter.
3841 (tui_show_disassem): Likewise.
3842 (tui_show_disassem_and_update_source): Likewise.
3843 (tui_get_begin_asm_address): Return architecture and PC value.
3845 * tui/tui.h (tui_get_low_disassembly_address): Add GDBARCH parameter.
3846 (tui_show_assembly): Add GDBARCH parameter.
3848 * tui/tui-layout.c (extract_display_start_addr): Return current window
3849 architecture in addition to current PC value.
3851 (tui_set_layout): Update calls to tui_get_low_disassembly_address and
3852 extract_display_start_addr. Pass architecture to
3853 tui_update_source_windows_with_addr.
3855 * tui/tui-source.c: Include "objfiles.h".
3856 (tui_set_source_content): Initialize window architecture.
3857 (tui_show_symtab_source): Add GDBARCH parameter. Pass to
3858 tui_update_source_window_as_is
3860 * tui/tui-source.h (tui_show_symtab_source): Add GDBARCH parameter.
3862 * tui/tui-stack.c (tui_set_locator_info): Add GDBARCH parameter.
3863 Install locator architecture.
3864 (tui_set_locator_filename): Update call.
3865 (tui_show_frame_info): Pass architecture to tui_set_locator_info
3868 * tui/tui-win.c (make_visible_with_new_height): Pass architecture
3869 to tui_update_source_window.
3871 * tui/tui-winsource.c: Include "objfiles.h".
3872 (tui_display_main): Update call to tui_get_begin_asm_address.
3873 Pass architecture to tui_update_source_windows_with_addr.
3874 (tui_update_source_window): Add GDBARCH parameter. Pass to
3875 tui_update_source_window_as_is.
3876 (tui_update_source_window_as_is): Add GDBARCH parameter.
3877 Pass to tui_set_disassem_content.
3878 (tui_update_source_windows_with_addr): Add GDBARCH parameter.
3879 Pass to subroutines.
3880 (tui_update_source_windows_with_line): Pass objfile architecture
3882 (tui_horizontal_source_scroll): Pass architecture to
3883 tui_update_source_window_as_is.
3885 * tui/tui-winsource.h (tui_update_source_window): Add GDBARCH
3887 (tui_update_source_window_as_is): Likewise.
3888 (tui_update_source_windows_with_addr): Likewise.
3890 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3892 * breakpoint.h (struct breakpoint): New member GDBARCH.
3893 * breakpoint.c: Include "arch-utils.h".
3894 (set_raw_breakpoint_without_location): Add GDBARCH parameter.
3895 Use it to set breakpoint architecture.
3896 (set_raw_breakpoint): Add GDBARCH parameter.
3897 (create_internal_breakpoint): Likewise.
3898 (create_catchpoint): Likewise.
3899 (create_fork_vfork_event_catchpoint): Likewise.
3900 (create_breakpoint): Likewise.
3901 (create_breakpoints): Likewise.
3902 (break_command_really): Likewise.
3903 (create_ada_exception_breakpoint): Likewise.
3904 Update local callers to pass architecture:
3905 (create_internal_breakpoint): Update.
3906 (create_overlay_event_breakpoint): Update.
3907 (create_longjmp_master_breakpoint): Update.
3908 (create_thread_event_breakpoint): Update.
3909 (create_solib_event_breakpoint): Update.
3910 (create_catchpoint): Update.
3911 (create_fork_vfork_event_catchpoint): Update.
3912 (set_momentary_breakpoint): Update.
3913 (clone_momentary_breakpoint): Update.
3914 (create_breakpoint): Update.
3915 (create_breakpoints): Update.
3916 (break_command_really): Update.
3917 (break_command_1): Update.
3918 (set_breakpoint): Update.
3919 (watch_command_1): Update.
3920 (catch_fork_command_1): Update.
3921 (catch_exec_commnd_1): Update.
3922 (handle_gnu_v3_exceptions): Update.
3923 (create_ada_exception_breakpoint): Update.
3924 (catch_ada_exception_command): Update.
3925 (catch_assert_command): Update.
3926 (trace_command): Update.
3928 * breakpoint.h (struct bp_location): New member GDBARCH.
3929 * breakpoint.c (get_sal_arch): New function.
3930 (set_raw_breakpoint): Set location architecture.
3931 (add_location_to_breakpoint): Likewise.
3932 (clone_momentary_breakpoint): Likewise.
3933 (watch_command_1): Likewise.
3934 (update_watchpoint): Likewise.
3935 (bp_loc_is_permanent): Use location architecture instead of
3937 (adjust_breakpoint_address): Add GDBARCH parameter; use it
3938 instead of current_gdbarch.
3939 Update callers of adjust_breakpoint_address to pass
3940 breakpoint location architecture:
3941 (set_raw_breakpoint): Update.
3942 (watch_command_1): Update.
3944 * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
3946 (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
3947 (encode_actions): Pass tracepoint architecture to add_local_symbols
3948 (encode_actions): Use tracepoint architecture instead of
3949 current_gdbarch. Pass it to add_local_symbols and collect_symbol.
3951 * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
3952 of print_one callback with last_loc.
3953 * breakpoint.c (print_one_breakpoint_location): Replace last_addr
3954 parameter with last_loc.
3955 (print_one_breakpoint): Likewise.
3956 (do_captured_breakpoint_query): Update call.
3957 (breakpoint_1): Pass last_loc instead of last_addr to
3958 print_one_breakpoint. Pass last location architecture instead of
3959 current_gdbarch to set_next_address.
3960 Update all implementations of the print_one callback:
3961 * breakpoint.c (print_one_catch_fork): Update.
3962 (print_one_catch_vfork): Update.
3963 (print_one_catch_exec): Update.
3964 (print_one_exception_catchpoint): Update.
3965 * ada-lang.c (print_one_exception): Update.
3966 (print_one_catch_exception): Update.
3967 (print_one_catch_exception_unhandled): Update.
3968 (print_one_catch_assert): Update.
3970 * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
3971 parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
3972 (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
3973 to print_one_breakpoint_location.
3974 (breakpoint_address_bits): New function.
3975 (do_captured_breakpoint_query): Compute number of address bits to print
3976 and pass it to print_one_breakpoint.
3977 (breakpoint_1): Likewise. Use it instead of current_gdbarch.
3979 * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
3980 * breakpoint.c (create_thread_event_breakpoint): Likewise.
3981 Update callers to create_thread_event_breakpoint:
3982 * aix-thread.c (pd_enable): Update.
3983 * linux-thread-db.c (enable_thread_event): Update.
3985 * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
3986 * breakpoint.c (create_solib_event_breakpoint): Likewise.
3987 Update callers to create_solib_event_breakpoint:
3988 * solib-frv.c (enable_break, enable_break2): Update.
3989 * solib-pa64.c (pa64_solib_create_inferior_hook): Update.
3990 * solib-som.c (som_solib_create_inferior_hook): Update.
3991 * solib-darwin.c (darwin_solib_create_inferior_hook): Update.
3992 * solib-svr4.c (enable_break): Update.
3994 * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
3995 * breakpoint.c (insert_single_step_breakpoint): Likewise.
3996 Update callers to insert_single_step_breakpoint:
3997 * alpha-tdep.c (alpha_software_single_step): Update.
3998 * arm-linux-tdep.c (arm_linux_software_single_step): Update.
3999 * arm-tdep.c (arm_software_single_step): Update.
4000 * cris-tdep.c (cris_software_single_step): Update.
4001 * rs6000-aix-tdep.c (rs6000_software_single_step): Update.
4002 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
4003 * sparc-tdep.c (sparc_software_single_step): Update.
4004 * spu-tdep.c (spu_software_single_step): Update.
4005 * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
4006 Pass it to insert_single_step_breakpoint.
4007 (mips_software_single_step): Pass architecture to
4008 deal_with_atomic_sequence and insert_single_step_breakpoint.
4010 * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
4011 (deprecated_remove_raw_breakpoint): Likewise.
4012 * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
4013 (deprecated_remove_raw_breakpoint): Likewise.
4014 Update callers to deprecated_insert_raw_breakpoint and
4015 deprecated_remove_raw_breakpoint:
4016 * breakpoint.c (single_step_gdbarch): New static variable.
4017 (insert_single_step_breakpoint): Pass GDBARCH parameter to
4018 deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
4019 (remove_single_step_breakpoints): Pass architecture stored in
4020 single_step_gdbarch to deprecated_remove_raw_breakpoint.
4021 * rs6000-nat.c (exec_one_dummy_insn): Update.
4022 * solib-irix.c (enable_break, disable_break): Update.
4023 * procfs.c (procfs_mourn_inferior): Update.
4024 (remove_dbx_link_breakpoint): Update.
4026 * breakpoint.h (set_breakpoint): Add GDBARCH parameter.
4027 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
4028 * breakpoint.c (set_breakpoint): Add GDBARCH parameter.
4029 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
4030 Update callers to set_breakpoint, set_momentary_breakpoint and
4031 set_momentary_breakpoint_at_pc:
4032 * breakpoint.c (set_momentary_breakpoint_at_pc): Update.
4033 (until_break_command): Update.
4034 * infcall.c (call_function_by_hand): Update.
4035 * infcmd.c (finish_backward, finish_forward): Update.
4036 * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
4037 parameter. Pass it to set_momentary_breakpoint.
4038 (insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
4039 Pass it to set_momentary_breakpoint_at_pc.
4040 (handle_inferior_event): Update.
4041 (insert_step_resume_breakpoint_at_frame): Update.
4042 (insert_step_resume_breakpoint_at_caller): Update..
4043 * mi/mi-cmd-break.c: Include "arch-utils.h".
4044 (mi_cmd_break_insert): Update.
4046 * target.h (struct target_ops): Add GDBARCH parameter to
4047 to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
4048 and to_remove_hw_breakpoint members.
4049 (target_insert_breakpoint, target_remove_breakpoint,
4050 target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
4051 parameter, pass to target routine.
4052 (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
4054 * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
4055 debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
4056 GDBARCH parameter, pass to target routine.
4057 (update_current_target): Update function signature.
4058 * breakpoint.c (insert_bp_location, remove_breakpoint,
4059 deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
4060 Pass architecture to target_ routines.
4061 Update all implementations of the target breakpoint routines to take
4062 GDBARCH parameter and use it instead of GDBARCH as appropriate:
4063 * corelow.c (ignore): Update.
4064 * exec.c (ignore): Update.
4065 * mem-break.c (memory_insert_breakpoint): Update.
4066 (memory_remove_breakpoint): Update.
4067 * monitor.c (monitor_insert_breakpoint): Update.
4068 (monitor_remove_breakpoint): Update.
4069 * record.c (record_insert_breakpoint): Update.
4070 (record_beneath_to_insert_breakpoint): Update.
4071 (record_remove_breakpoint): Update.
4072 (record_beneath_to_remove_breakpoint): Update.
4073 * remote.c (remote_insert_breakpoint): Update.
4074 (remote_remove_breakpoint): Update.
4075 (remote_insert_hw_breakpoint): Update.
4076 (remote_remove_hw_breakpoint): Update.
4077 * remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
4078 (m32r_remove_breakpoint): Update.
4079 * remote-mips.c (mips_insert_breakpoint): Update.
4080 (mips_remove_breakpoint): Update.
4081 * i386-nat.c (i386_insert_hw_breakpoint): Update.
4082 (i386_remove_hw_breakpoint): Update.
4083 * nto-procfs.c (procfs_insert_breakpoint): Update.
4084 (procfs_remove_breakpoint): Update.
4085 (procfs_insert_hw_breakpoint): Update.
4086 (procfs_remove_hw_breakpoint): Update.
4088 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4090 * frame.h (frame_unwind_arch): New.
4091 (frame_unwind_caller_arch): Likewise.
4092 * frame-unwind.h (frame_prev_arch_ftype): New type.
4093 (struct frame_unwind): New member prev_arch.
4094 * frame.c (struct frame_info): New member prev_arch.
4095 (frame_unwind_arch): New function.
4096 (frame_unwind_caller_arch): Likewise..
4097 (get_frame_arch): Reimplement in terms of frame_unwind_arch.
4098 * sentinel-frame.c (sentinel_frame_prev_arch): New function.
4099 (sentinel_frame_unwinder): Install it.
4101 * frame.c (frame_pc_unwind): Use frame_unwind_arch instead
4103 (frame_unwind_register_value): Likewise.
4104 (frame_unwind_register_signed): Likewise.
4105 (frame_unwind_register_unsigned): Likewise.
4106 * frame-unwind.c (frame_unwind_got_optimized): Likewise.
4107 (frame_unwind_got_register): Likewise.
4108 (frame_unwind_got_constant): Likewise.
4109 (frame_unwind_got_bytes): Likewise.
4110 (frame_unwind_got_address): Likewise.
4112 * frame.h (enum frame_type): New value ARCH_FRAME.
4113 * frame.c (fprint_frame_type): Handle ARCH_FRAME.
4114 * stack.c (print_frame_info): Likewise.
4116 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4118 * target.h (struct target_ops): New member to_thread_architecture.
4119 (target_thread_architecture): New macro.
4120 * target.c (update_current_target): Inherit to_thread_architecture.
4121 (default_thread_architecture): New function.
4122 (debug_to_thread_architecture): New function.
4123 (setup_target_debug): Handle to_thread_architecture.
4125 * regcache.h (get_thread_arch_regcache): New.
4126 * regcache.c (struct regcache_list): New data type.
4127 (current_regcache): Hold regcache list instead of single regcache.
4128 (current_thread_ptid, current_thread_arch): New static variables.
4129 (get_thread_arch_regcache): New function.
4130 (get_thread_regcache): Use it. Call target_thread_architecture.
4131 (regcache_thread_ptid_changed): Update to current_regcache changes.
4132 (registers_changed): Likewise. Reset current_thread_arch and
4133 current_thread_ptid.
4135 * remote.c (remote_wait): Access target registers in target_gdbarch.
4136 * linux-nat.c (linux_nat_do_thread_registers): Likewise.
4137 * proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
4138 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
4139 * sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
4140 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
4141 * solib-svr4.c (enable_break): Likewise.
4142 (svr4_relocate_main_executable): Likewise.
4144 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4146 * python/python-internal.h (struct language_defn): Declare.
4147 (python_gdbarch, python_language): Likewise.
4148 (ensure_python_env): Add prototype.
4149 (make_cleanup_py_restore_gil): Remove prototype.
4151 * python/python.c: Include "arch-utils.h", "value.h" and "language.h".
4152 (python_gdbarch, python_language): New global variables.
4153 (struct python_env): New data type.
4154 (ensure_python_env, restore_python_env): New functions.
4155 (eval_python_from_control_command): Call ensure_python_env to
4156 install current architecture and language.
4157 (python_command, gdbpy_new_objfile): Likewise.
4158 * python/python-cmd.c: Include "arch-utils.h" and "language.h".
4159 (cmdpy_destroyer, cmdpy_function, cmdpy_completer): Call
4161 * python/python-type.c (clean_up_objfile_types): Likewise.
4162 * python/python-objfile.c: Include "language.h".
4163 (clean_up_objfile): Call ensure_python_env.
4164 * python/python-prettyprint.c (apply_val_pretty_printer): Likewise.
4165 (apply_varobj_pretty_printer): Do not call PyGILState_Ensure.
4166 * varobj.c (varobj_ensure_python_env): New helper function.
4167 (varobj_get_display_hint, update_dynamic_varobj_children,
4168 install_default_visualizer, varobj_set_visualizer, free_variable,
4169 value_get_print_value): Call it.
4170 (value_get_print_value): Add varobj argument instead of pretty
4171 printer argument. Update all callers.
4173 * python/python-utils.c (py_gil_restore, make_cleanup_py_restore_gil):
4176 * value.h (internal_function_fn): Add GDBARCH and LANGUAGE argument.
4177 (call_internal_function): Likewise.
4178 * value.c (call_internal_function): Likewise. Pass to handler.
4179 * eval.c (evaluate_subexp_standard): Update call.
4180 * python/python-function.c: Include "language.h".
4181 (fnpy_call): Add GDBARCH and LANGAUAGE arguments and call
4182 make_cleanup_python_env.
4184 * python/python-value.c (builtin_type_pyint, builtin_type_pyfloat,
4185 builtin_type_pylong, builtin_type_pybool, builtin_type_pychar,
4186 valpy_str): Use python_gdbarch and python_language instead of
4187 current_gdbarch and current_language.
4188 * python/python-type.c (typy_lookup_typename): Likewise.
4190 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4192 * arch-utils.c (selected_byte_order): Return target_byte_order_user.
4193 (show_endian): Use target_byte_order_user if specified; otherwise
4194 use get_current_arch () instead of current_gdbarch.
4195 (show_architecture): Use set_architecture_string if specified;
4196 otherwise use get_current_arch () instead of current_gdbarch.
4197 (get_current_arch): New function.
4198 * arch-utils.h (get_current_arch): Add prototype.
4200 * osabi.c (show_osabi): Use get_current_arch () instead of
4203 * findcmd.c: Include "arch-utils.h".
4204 (parse_find_args): Add BIG_P argument. Use it instead of byte order
4206 (find_command): Use get_current_arch () instead of current_gdbarch.
4207 Pass byte order to parse_find_args.
4209 * maint.c: Include "arch-utils.h".
4210 (maintenance_print_architecture): Use get_current_arch () instead
4213 * reggroups.c: Include "arch-utils.h".
4214 (maintenance_print_reggroups): Use get_current_arch () instead
4217 * symfile.c: Include "arch-utils.h".
4218 (overlay_load_command): Use get_current_arch () instead of
4221 * value.c: Include "arch-utils.h".
4222 (show_convenience): Use get_current_arch () instead of
4225 * tui/tui-regs.c: Include "arch-utils.h".
4226 (tui_reg_next_command): Use get_current_arch () instead of
4229 * mi/mi-main.c: Include "arch-utils.h".
4230 (mi_cmd_data_read_memory): Use get_current_arch () instead of
4233 * parse.c: Include "arch-utils.h".
4234 (parse_exp_in_context): Use get_current_arch () instead of
4237 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4239 * gdbtypes.c (make_pointer_type, make_reference_type,
4240 smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
4241 Use type architecture instead of current_gdbarch.
4243 * gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
4244 Add GDBARCH paramter.
4245 * gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
4246 Add GDBARCH parameter. Use it instead of current_gdbarch.
4247 * c-typeprint.c (c_type_print_modifier): Update call.
4248 * parse.c (push_type_address_space): Likewise.
4250 * findvar.c (extract_typed_address, store_typed_address): Use type
4251 architecture instead of current_gdbarch.
4253 * value.c (value_as_address, unpack_field_as_long): Use type architecture
4254 instead of current_gdbarch.
4256 * doublest.c (floatformat_from_length): Add GDBARCH argument. Use it
4257 instead of current_gdbarch.
4258 (floatformat_from_type): Pass type architecture.
4260 * infcall.c (find_function_addr): Use type architecture instead
4263 * valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
4264 value_bit_index): Use type architecture instead of current_gdbarch.
4265 * valops.c (value_cast, value_slice): Likewise.
4267 * value.h (modify_field): Add TYPE argument.
4268 * value.c (modify_field): Add TYPE argument. Use type architecture
4269 instead of current_gdbarch.
4270 (set_internalvar_component): Likewise.
4271 * eval.c (evaluate_struct_tuple): Update call.
4272 * valops.c (value_assign): Likewise.
4273 * ada-lang.c (modify_general_field): Likewise. Add TYPE argument.
4274 (make_array_descriptor): Update calls.
4275 (move_bits): Add BITS_BIG_ENDIAN_P argument. Use it instead of
4277 (ada_value_assign, value_assign_to_component): Update calls.
4278 (decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
4279 value_assign_to_component): Use type arch instead of current_gdbarch.
4281 * printcmd.c (float_type_from_length): Remove GDBARCH argument,
4282 use type architecture instead.
4283 (print_scalar_formatted, printf_command): Update calls. Use type
4284 architecture instead of current_gdbarch.
4285 * valprint.c (val_print_type_code_int): Use type architecture
4286 instead of current_gdbarch.
4287 * varobj.c (value_get_print_value): Likewise.
4288 * python/python-prettyprint.c (print_string_repr): Add GDBARCH
4289 argument. Use it instead of current_gdbarch.
4290 (apply_val_pretty_printer): Update call.
4292 * ada-valprint.c (ada_val_print_1): Use type architecture instead
4294 * c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
4295 Use it instead of current_gdbarch.
4296 (c_val_print): Update calls passing type architecture.
4297 * f-valprint.c (f_val_print): Use type architecture instead of
4299 * jv-valprint (java_value_print): Likewise.
4300 * m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
4301 Use it instead of current_gdbarch.
4302 (print_unpacked_pointer): Update calls passing type architecture.
4303 * scm-valprint.c (scm_scmval_print): Use type architecture instead of
4306 * gnu-v3-abi.c (get_class_arch): Remove.
4307 (gnuv3_rtti_type): Use get_type_arch instead of get_class_arch. Remove
4308 special-case check for Java classes.
4309 (gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
4310 gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
4311 Use get_type_arch instead of get_class_arch.
4313 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4315 * gdbtypes.h (TYPE_OBJFILE_OWNED, TYPE_OWNER): New macros.
4316 (TYPE_OBJFILE, TYPE_ALLOC, TYPE_ZALLOC): Reimplement.
4317 (alloc_type_arch): Add prototype.
4318 (alloc_type_copy): Likewise.
4319 (get_type_arch): Likewise.
4320 (arch_type): Likewise.
4321 (arch_integer_type): Likewise.
4322 (arch_character_type): Likewise.
4323 (arch_boolean_type): Likewise.
4324 (init_float_type): Remove, replace by ...
4325 (arch_float_type): ... this.
4326 (init_complex_type): Remove, replace by ...
4327 (arch_complex_type): ... this.
4328 (init_flags_type): Remove, replace by ...
4329 (arch_flags_type): ... this.
4330 (init_composite_type): Remove, replace by ...
4331 (arch_composite_type): ... this.
4333 * gdbtypes.c (alloc_type): No longer support NULL objfile.
4334 (init_type): Likewise.
4335 (alloc_type_arch): New function.
4336 (alloc_type_copy): New function.
4337 (get_type_arch): New function.
4339 (smash_type): Preserve type ownership information.
4340 (make_pointer_type, make_reference_type, make_function_type,
4341 smash_to_memberptr_type, smash_to_method_type): No longer
4342 preserve OBJFILE across smash_type calls.
4343 (make_pointer_type, make_reference_type, make_function_type,
4344 lookup_memberptr_type, lookup_methodptr_type, allocate_stub_method,
4345 create_range_type, create_array_type, create_set_type, copy_type):
4346 Use alloc_type_copy when allocating types.
4347 (check_typedef): Use alloc_type_arch.
4348 (copy_type_recursive): Likewise. Preserve type ownership data
4350 (recursive_dump_type): Dump type ownership data.
4351 (alloc_type_instance): Update type ownership check.
4352 (copy_type, copy_type_recursive): Likewise.
4354 (arch_type): New function.
4355 (arch_integer_type): Likewise.
4356 (arch_character_type): Likewise.
4357 (arch_boolean_type): Likewise.
4358 (init_float_type): Remove, replace by ...
4359 (arch_float_type): ... this.
4360 (init_complex_type): Remove, replace by ...
4361 (arch_complex_type): ... this.
4362 (init_flags_type): Remove, replace by ...
4363 (arch_flags_type): ... this.
4364 (append_flags_type_flag): Move down.
4365 (init_composite_type): Remove, replace by ...
4366 (arch_composite_type): ... this.
4367 (append_composite_type_field_aligned,
4368 append_composite_type_field): Move down.
4370 * gdbarch.c (gdbtypes_post_init): Allocate all types
4371 using per-architecture routines.
4372 * ada-lang.c (ada_language_arch_info): Likewise.
4373 * f-lang.c (build_fortran_types): Likewise.
4374 * jv-lang.c (build_java_types): Likewise.
4375 * m2-lang.c (build_m2_types): Likewise.
4376 * scm-lang.c (build_scm_types): Likewise.
4378 * ada-lang.c (ada_type_of_array): Use alloc_type_copy.
4379 (packed_array_type): Likewise.
4380 (ada_template_to_fixed_record_type_1): Likewise.
4381 (template_to_static_fixed_type): Likewise.
4382 (to_record_with_fixed_variant_part): Likewise.
4383 (to_fixed_variant_branch_type): Likewise.
4384 (to_fixed_array_type): Likewise.
4385 (to_fixed_range_type): Likewise.
4386 (empty_record): Use type instead of objfile argument.
4387 Use alloc_type_copy.
4388 (to_fixed_variant_branch_type): Update call to empty_record.
4389 * jv-lang.c (type_from_class): Use alloc_type_arch.
4391 * arm-tdep.c (arm_ext_type): Allocate per-architecture type.
4392 * i386-tdep.c (i386_eflags_type, i386_mxcsr_type, i387_ext_type,
4393 i386_mmx_type, i386_sse_type): Likewise.
4394 * ia64-tdep.c (ia64_ext_type): Likewise.
4395 * m32c-tdep.c (make_types): Likewise.
4396 * m68k-tdep.c (m68k_ps_type, m68881_ext_type): Likewise.
4397 * rs6000-tdep.c (rs6000_builtin_type_vec64,
4398 rs6000_builtin_type_vec128): Likewise.
4399 * sparc-tdep.c (sparc_psr_type, sparc_fsr_type): Likewise.
4400 * sparc64-tdep.c (sparc64_pstate_type, sparc64_fsr_type,
4401 sparc64_fprs_type): Likewise.
4402 * spu-tdep.c (spu_builtin_type_vec128): Likewise.
4403 * xtensa-tdep.c (xtensa_register_type): Likewise.
4404 * linux-tdep.c (linux_get_siginfo_type): Likewise.
4405 * target-descriptions.c (tdesc_gdb_type): Likewise.
4406 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
4408 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4410 * i386-tdep.h (struct gdbarch_tdep): Add i386_eflags_type and
4411 i386_mxcsr_type members.
4412 (i386_eflags_type): Make into function.
4413 (i386_mxcsr_type): Likewise.
4414 * i386-tdep.c (i386_eflags_type): Make into function.
4415 (i386_mxcsr_type): Likewise.
4416 (i386_register_type): Update uses.
4417 (i386_init_types): Remove.
4418 (_initialize_i386_tdep): Do not call it.
4419 * amd64-tdep.c (amd64_register_type): Update uses.
4421 * m68k-tdep.h (struct gdbarch_tdep): Add m68k_ps_type member.
4422 * m68k-tdep.c (m68k_ps_type): Make into function.
4423 (m68k_register_type): Update use.
4424 (m68k_init_types): Remove.
4425 (_initialize_m68k_tdep): Do not call it.
4427 * sparc-tdep.h (struct gdbarch_tdep): Add sparc_psr_type,
4428 sparc_fsr_type, sparc64_pstate_type, sparc64_fsr_type, and
4429 sparc64_fprs_type members.
4430 * sparc-tdep.c (sparc_psr_type): Make into function.
4431 (sparc_fsr_type): Likewise.
4432 (sparc32_register_type): Update uses.
4433 (sparc_init_types): Remove.
4434 (_initialize_sparc_tdep): Do not call it.
4435 * sparc64-tdep.c (sparc64_pstate_type): Make into function.
4436 (sparc64_fsr_type): Likewise.
4437 (sparc64_fprs_type): Likewise.
4438 (sparc64_register_type): Update uses.
4439 (sparc64_init_types): Remove.
4440 (_initialize_sparc64_tdep): Likewise.
4442 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4444 * gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,
4445 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
4446 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
4447 (init_float_type, init_complex_type): Add prototypes.
4448 * gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double,
4449 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
4450 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
4451 (_initialize_gdbtypes): Do not initialize them.
4452 (build_flt): Rename to ...
4453 (init_float_type): ... this. Make global.
4454 (build_complex): Rename to ...
4455 (init_complex_type): ... this. Make global. Remove BIT argument.
4456 (gdbtypes_post_init): Update calls.
4458 * ada-lang.c (ada_language_arch_info): Use init_float_type.
4459 * jv-lang.c (build_java_types): Likewise.
4460 * m2-lang.c (build_m2_types): Likewise.
4461 * f-lang.c (build_fortran_types): Use init_float_type and
4464 * target-descriptions.c (tdesc_gdb_type): Call init_float_type instead
4465 of using builtin_type_ieee_single, builtin_type_ieee_double, or
4466 builtin_type_arm_ext.
4468 * ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member.
4469 * ia64-tdep.c (builtin_type_ia64_ext): Remove.
4470 (_initialize_ia64_tdep): Do not initialize it.
4471 (floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext):
4473 (ia64_ext_type): New function.
4474 (ia64_register_reggroup_p, ia64_convert_register_p,
4475 ia64_register_to_value, ia64_value_to_register,
4476 ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type
4477 instead of builtin_type_ia64_ext.
4479 * i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member.
4480 (i387_ext_type): Add prototype.
4481 * i386-tdep.c (i387_ext_type): New function.
4482 (i386_extract_return_value, i386_store_return_value,
4483 i386_register_type): Use it instead of builtin_type_i387_ext.
4484 * amd64-tdep.c (amd64_register_type): Likewise.
4485 * i387-tdep.c (print_i387_value, i387_register_to_value,
4486 i387_value_to_register): Likewise.
4487 (print_i387_value, print_i387_ext): Add GDBARCH argument.
4488 (print_i387_ext, i387_print_float_info): Pass to subroutines.
4490 * m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member.
4491 * m68k-tdep.c (m68881_ext_type): New function.
4492 (m68k_register_type, m68k_convert_register_p): Use it instead
4493 of builtin_type_m68881_ext.
4495 * arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member.
4496 * arm-tdep.c (arm_ext_type): New function.
4497 (arm_register_type): Use it instead of builtin_type_arm_ext.
4499 * alpha-tdep.c (alpha_register_type): Use builtin types
4500 instead of builtin_type_ieee_double.
4502 * mips-tdep.c (mips_float_register_type, mips_double_register_type):
4504 (mips_register_type): Use builtin types instead of
4505 builtin_type_ieee_single and builtin_type_ieee_double.
4506 (mips_print_fp_register): Use builtin types instead of
4507 mips_float_register_type and mips_double_register_type.
4509 * hppa-tdep.c (hppa32_register_type, hppa64_register_type):
4510 Use builtin types instead of builtin_type_ieee_single and
4511 builtin_type_ieee_double.
4513 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4515 * gdbtypes.h (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
4516 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
4517 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
4518 builtin_type_int128, builtin_type_uint128): Remove.
4519 (struct builtin_type): New members builtin_int0, builtin_int8,
4520 builtin_uint8, builtin_int16, builtin_uint16, builtin_int32,
4521 builtin_uint32, builtin_int64, builtin_uint64, builtin_int128,
4522 and builtin_uint128.
4523 * gdbtypes.c (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
4524 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
4525 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
4526 builtin_type_int128, builtin_type_uint128): Remove.
4527 (_initialize_gdbtypes): Do not initialize them.
4528 (gdbtypes_post_init): Initialize fixed-size integer types.
4530 * dwarf2expr.c (unsigned_address_type, signed_address_type): Add
4531 GDBARCH argument. Return platform-specific type.
4532 (dwarf2_read_address, execute_stack_op): Update calls.
4534 * target-descriptions.c (tdesc_gdb_type): Use platform-specific types
4535 instead of global builtin_int_... variables.
4536 * mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
4537 * printcmd.c (do_examine): Likewise.
4538 * jv-exp.y (parse_number): Likewise.
4540 * alpha-tdep.c (alpha_register_type, alpha_push_dummy_call,
4541 alpha_store_return_value): Likewise.
4542 * amd64-linux-tdep.c (amd64_linux_register_type): Likewise.
4543 * amd64-tdep.c (amd64_register_type): Likewise.
4544 * arm-tdep.c (arm_register_type): Likewise.
4545 * avr-tdep.c (avr_register_type): Likewise.
4546 * cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
4547 * frv-tdep.c (frv_register_type): Likewise.
4548 * h8300-tdep.c h8300_register_type): Likewise.
4549 * hppa-tdep.c (hppa64_push_dummy_call, hppa32_register_type,
4550 hppa64_register_type): Likewise.
4551 * i386-tdep.c (i386_mmx_type, i386_sse_type): Likewise.
4552 * iq2000-tdep.c (iq2000_register_type): Likewise.
4553 * lm32-tdep.c (lm32_register_type, lm32_push_dummy_call): Likewise.
4554 * m32r-tdep.c (m32r_register_type): Likewise.
4555 * m68hc11-tdep.c (m68hc11_register_type, m68hc11_pseudo_register_read,
4556 m68hc11_pseudo_register_write): Likewise.
4557 * m68k-tdep.c (m68k_register_type): Likewise.
4558 * m88k-tdep.c (m88k_register_type, m88k_store_arguments): Likewise.
4559 * mep-tdep.c (mep_register_type): Likewise.
4560 * mips-tdep.c (mips_register_type, mips_pseudo_register_type,
4561 mips_print_fp_register): Likewise.
4562 * moxie-tdep.c (moxie_register_type): Likewise.
4563 * mt-tdep.c (mt_copro_register_type, mt_register_type): Likewise.
4564 * rs6000-tdep.c (rs6000_builtin_type_vec64,
4565 rs6000_builtin_type_vec128): Likewise.
4566 * score-tdep.c (score_register_type): Likewise.
4567 * sparc-tdep.c (sparc32_register_type, sparc32_store_arguments):
4569 * sparc64-tdep.c (sparc64_register_type, sparc64_store_arguments):
4571 * spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
4572 * v850-tdep.c (v850_register_type): Likewise.
4573 * xstormy16-tdep.c (xstormy16_register_type): Likewise.
4574 * xtensa-tdep.c (xtensa_register_type): Likewise.
4576 * mt-tdep.c (struct gdbarch_tdep): New data structure.
4577 (mt_gdbarch_init): Alloc TDEP structures.
4578 (mt_register_type): Cache coprocessor type in TDEP instead of
4579 static global variable.
4581 * xtensa-tdep.h (struct gdbarch_tdep): Add type_entries member.
4582 * xtensa-tdep.c (type_entries): Remove.
4583 (xtensa_register_type): Cache fixed-size types in TDEP instead
4584 of in global variable.
4586 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4588 * gdbtypes.h (builtin_type_true_char): Remove.
4589 (builtin_type_true_unsigned_char): Likewise.
4590 (struct builtin_type): Add builtin_true_char and
4591 builtin_true_unsigned_char members.
4592 * gdbtypes.c (builtin_type_true_char): Remove.
4593 (builtin_type_true_unsigned_char): Likewise.
4594 (_initialize_gdbtypes): Do not initialize them.
4595 (gdbtypes_post_init): Initialize builtin_true_char and
4596 builtin_true_unsigned_char members of builtin_type.
4598 * printcmd.c (print_scalar_formatted): Use builtin_type
4599 members instead of builtin_type_true_char and
4600 builtin_type_true_unsigned_char.
4601 * ada-valprint.c (ada_val_print_1): Likewise.
4603 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4605 * gdbtypes.h (builtin_type_void): Remove.
4606 * gdbtypes.c (builtin_type_void): Remove.
4607 (_initialize_gdbtypes): Do not initialize it.
4609 (safe_parse_type): Add GDBARCH argument. Use it to construct
4611 (check_stub_method): Update call.
4613 * infcall.c (call_function_by_hand): Use platform-specific type
4614 instead of builtin_type_void.
4615 * valops.c (value_cast): Use input void type instead of
4618 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4620 * ada-lang.c (assign_component): Use platform-specific integer type
4621 instead of builtin_type_int32 type.
4622 (ada_evaluate_subexp) [OP_ATR_SIZE]: Likewise.
4624 * ax-gdb.c (gen_expr) [UNOP_NEG]: Use platform-specific integer type
4625 instead of builtin_type_int8 type.
4626 * valarith.c (value_x_unop): Likewise.
4627 * python/python-value.c (valpy_absolute): Avoid reference to
4628 builtin_type_int8 type.
4630 * eval.c (evaluate_subexp_standard): Use platform-specific integer
4631 type instead of builtin_type_int8 as EVAL_SKIP return value type.
4632 * ada-lang.c (ada_evaluate_subexp): Likewise.
4633 * jv-lang.c (evaluate_subexp_java): Likewise.
4634 * m2-lang.c (evaluate_subexp_modula2): Likewise.
4635 * scm-lang.c (evaluate_exp): Likewise.
4637 * value.h (value_bitstring): Add INDEX_TYPE argument.
4638 * valops.c (value_bitstring): Add INDEX_TYPE argument, use it instead
4639 of builtin_type_int32 as base range type.
4640 * eval.c (evaluate_subexp_standard): Update value_bitstring call.
4642 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4644 * gdbtypes.c (lookup_array_range_type): Add prototype.
4645 (lookup_string_range_type): Likewise.
4646 * gdbtypes.c (lookup_array_range_type): New function.
4647 (lookup_string_range_type): Likewise.
4649 * ax-gdb.c (gen_repeat): Use lookup_array_range_type.
4650 * parse.c (follow_types): Likewise.
4651 * jv-lang.c (java_array_type): Likewise.
4652 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
4653 * mt-tdep.c (mt_register_type): Likewise.
4654 * sh-tdep.c (sh_sh4_build_float_register_type): Likewise.
4655 * sh64-tdep.c (sh64_build_float_register_type): Likewise.
4656 * value.c (allocate_repeat_value): Likewise.
4657 * valops.c (value_array, value_cstring): Likewise.
4658 * valops.c (value_string): Use lookup_string_range_type.
4660 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4662 * m2-typeprint.c (m2_print_bounds, m2_is_long_set_of_type): Remove
4663 redundant check for NULL TYPE_TARGET_TYPE.
4664 * m2-valprint.c (m2_print_long_set): Likewise.
4665 * p-valprint.c (pascal_type_print_base): Likewise.
4667 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4669 * printcmd.c (next_gdbarch): New static variable.
4670 (set_next_address, do_examine, x_command): Set it.
4671 (decode_format): Use 'a' size to indicate width of an address.
4672 (do_examine): Add GDBARCH argument. Handle 'a' size.
4673 (x_command): Pass architecture to do_examine.
4674 Error if called without argument the first time.
4675 (do_one_display): Pass architecture to do_examine.
4677 (examine_i_type, examine_b_type, examine_h_type, examine_w_type,
4678 examine_g_type): Remove.
4679 (_initialize_printcmd): Do not initialize them.
4680 (do_examine): Use builin_type_int... instead of examine_..._type.
4682 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4684 * gdbtypes.h (struct builtin_type): Add internal_fn member.
4685 * gdbtypes.c (gdbtypes_post_init): Initialize it.
4686 * value.c (internal_fn_type): Remove.
4687 (_initialize_values): Do not initialize it.
4689 * value.c (struct internalvar): Add enum internalvar_kind type and
4690 kind member. Restructure union internalvar_data type. Remove type,
4691 canonical, and make_value members.
4692 (init_if_undefined_command): Update for data structure changes.
4693 (create_internalvar): Likewise.
4694 (create_internalvar_type_lazy): Likewise.
4695 (get_internalvar_integer): Likewise.
4696 (get_internalvar_function): Likewise.
4697 (set_internalvar_component): Likewise.
4698 (set_internalvar): Likewise.
4699 (set_internalvar_integer): Likewise.
4700 (set_internalvar_function): Likewise.
4701 (clear_internalvar): Likewise.
4702 (add_internal_function): Likewise.
4703 (preserve_one_internalvar): New function.
4704 (preserve_values): Call it.
4706 * value.h (value_of_internalvar): Add GDBARCH parameter.
4707 (internalvar_make_value): Likewise.
4708 * value.c (value_of_internalvar): Add GDBARCH parameter. Pass it to
4709 make_value callback. Use it to generate per-architecture result value
4710 types for internal variables with no pre-defined type. Update for data
4712 (show_convenience): Pass architecture to value_of_internalvar.
4713 * eval.c (evaluate_subexp_standard): Likewise.
4714 * infrun.c (siginfo_make_value): Add GDBARCH parameter. Use it
4715 instead of current frame architecture. Return per-architecture type.
4717 * value.h (set_internalvar_string): Add prototype.
4718 * value.c (set_internalvar_string): New function.
4719 * tracepoint.c (set_traceframe_context): Use it.
4721 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4723 * jv-lang.h (java_int_type, java_byte_type, java_short_type,
4724 java_long_type, java_boolean_type, java_char_type, java_float_type,
4725 java_double_type, java_void_type): Remove.
4726 (struct builtin_java_type): New data type.
4727 (builtin_java_type): Add prototype.
4728 (java_primitive_type): Add GDBARCH argument.
4729 (java_primitive_type_from_name): Likewise.
4730 (type_from_class): Likewise.
4732 * jv-lang.c (java_int_type, java_byte_type, java_short_type,
4733 java_long_type, java_boolean_type, java_char_type, java_float_type,
4734 java_double_type, java_void_type): Remove.
4736 (build_java_types, builtin_java_type): New functions.
4737 (java_type_data): New static variable.
4738 (_initialize_java_language): Initialize it. No longer initialize
4740 (java_language_arch_info): Use per-architecture types.
4742 (java_primitive_type): Add GDBARCH argument. Return per-architecture
4743 type instead of refering to global variable.
4744 (java_primitive_type_from_name): Add GDBARCH argument.
4745 (java_primitive_type_name): New function.
4746 (java_demangled_signature_length): Use it instead of
4747 java_primitive_type_from_name.
4748 (java_demangled_signature_copy): Likewise.
4750 (type_from_class): Add GDBARCH argument. Pass to java_link_class_type,
4751 java_primitive_type, and recursive type_from_class call.
4752 (java_link_class_type): Add GDBARCH argument. Pass to type_from_class
4753 calls. Use per-architecture types instead of global types.
4755 * jv-exp.y (parse_java_type): New define.
4756 Use per-architecture types instead of global types througout.
4758 * jv-valprint.c (java_value_print): Pass architecture to
4759 type_from_class and java_primitive_type_from_name. Use per-
4760 architecture types instead of global types.
4762 2009-07-01 Doug Evans <dje@google.com>
4764 * NEWS: Mention biarch amd64-linux gdbserver and hardware watchpoint
4765 support for i386-linux, amd64-linux, and i386-win32 builds of
4768 2009-07-01 Nick Roberts <nickrob@snap.net.nz>
4770 * Makefile.in (HFILES_NO_SRCDIR): Remove entries for deleted files.
4772 2009-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
4774 * Makefile.in (TARGET_FLAGS_TO_PASS): Include also FORCE_PARALLEL.
4775 (check//%): Construct FORCE_PARALLEL for the sub-make. Extend the
4778 2009-06-30 Paul Pluzhnikov <ppluzhnikov@google.com>
4781 * dwarf2-frame.c (dwarf2_frame_state): Move cfa_offset, cfa_reg,
4782 cfa_how and cfa_exp into regs and adjust users.
4784 2009-06-30 Daniel Jacobowitz <dan@codesourcery.com>
4786 * dwarf2read.c (inherit_abstract_dies): Work around GCC PR 40573.
4788 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
4790 * mi/mi-cmd-stack.c (parse_print_values): New.
4791 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Use the above.
4793 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
4795 * varobj.c (varobj_get_type): Use type_to_string.
4797 2009-06-29 Pedro Alves <pedro@codesourcery.com>
4799 * infrun.c (handle_inferior_event): Context switch to the new
4800 thread when resuming for a new_thread_event.
4802 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4804 * ada-lang.h (ada_convert_actual): Add GDBARCH argument.
4805 * ada-lang.c (convert_actual): Remove stale prototype.
4806 (ensure_lval, make_array_descriptor, ada_convert_actual):
4807 Add GDBARCH argument and pass through to subroutine calls.
4808 (ensure_lval): Use GDBARCH instead of current_gdbarch.
4809 * infcall.c (value_arg_coerce): Update ada_convert_actual call.
4811 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4813 * ada-lang.c (resolve): Use per-architecture void type instead
4814 of platform-independent one.
4815 (ada_evaluate_subexp) [STRUCTOP_STRUCT]: Likewise.
4816 (ada_resolve_function): Reimplement fallback logic to avoid
4817 explicit reference to builtin_type_void.
4819 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4821 * ada-valprint.c (ada_print_scalar): Accept NULL type argument
4822 to indicate scalar should be printed as default integer.
4823 (print_optional_low_bound): Pass NULL to ada_print_scalar to
4824 indicate default integer output.
4825 * ada-typeprint.c (print_range, print_range_bound): Likewise.
4826 (print_choices): Likewise. Thus, accept NULL as val_type.
4827 * ada-lang.c (ada_variant_discrim_type): Return NULL when failed
4828 to look up controlling discriminant name.
4830 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4832 * ada-lang.c (to_fixed_range_type): Add ORIG_TYPE argument.
4833 Fall back to orig_type as index type if symbol lookup fails.
4834 Allocate result types from ORIG_TYPE's objfile.
4835 (ada_array_bound_from_type, to_fixed_array_type,
4836 ada_evaluate_subexp): Pass original index type to
4837 to_fixed_range_type. Do not pass objfile.
4839 * ada-typeprint.c (print_range_type_named): Add ORIG_TYPE argument.
4840 Fall back to orig_type as index type if symbol lookup fails.
4841 (print_array_type, ada_print_type): Pass original index type
4842 to print_range_type_named.
4844 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4846 * ada-lang.c (ada_index_type): Update comment.
4848 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4850 * ada-lang.c (ada_index_type): Make static. Add NAME argument.
4851 Throw error on invalid input arguments. Return NULL if unable
4852 to determine index type.
4854 (ada_array_bound_from_type): Remove TYPEP argument.
4855 (ada_array_bound): Make static. Return LONGEST instead of value.
4856 Update for ada_array_bound_from_type change.
4857 (ada_array_length): Return LONGEST instead of value.
4858 Update for ada_array_bound_from_type change.
4859 (make_array_descriptor): Update for ada_array_bound change.
4861 (ada_evaluate_subexp) [OP_ATR_RANGE, OP_ATR_FIRST, OP_ATR_LAST,
4862 OP_ATR_LENGTH]: Update for ada_array_bound_from_type,
4863 ada_array_bound, ada_array_length, ada_index_type changes.
4864 Always use ada_index_type to compute result type; fall back
4865 to architecture-specific integer type if ada_index_type fails.
4867 * ada-lang.h (ada_index_type): Remove prototype.
4868 (ada_array_bound): Likewise.
4870 2009-06-29 Pedro Alves <pedro@codesourcery.com>
4872 * dbxread.c (read_dbx_symtab): Clear has_line_numbers when ending
4875 2009-06-29 Tom Tromey <tromey@redhat.com>
4877 * README: Mention parallel check.
4879 2009-06-29 Sami Wagiaalla <swagiaal@redhat.com>
4881 * dwarf2read.c (read_import_statement): Properly set import location
4883 * cp-support.h (cp_add_using, cp_add_using_directive): Now take char*
4884 inner, char* outer arguments. Updated callers.
4886 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4888 * value.h (value_subscript, value_subscripted_rvalue,
4889 value_bitstring_subscript, value_ptradd): Use LONGEST instead
4890 of value as type of the index argument.
4891 (value_ptrsub): Remove.
4892 * valarith.c (value_subscript, value_subscripted_rvalue,
4893 value_bitstring_subscript, value_ptradd): Use LONGEST instead
4894 of value as type of the index argument.
4895 (value_ptrsub): Remove.
4897 * wrapper.h (gdb_value_subscript): Use LONGEST instead of
4898 value as type of the index argument.
4899 * wrapper.c (gdb_value_subscript): Likewise.
4901 Update calls to gdb_value_subscript, value_subscript,
4902 value_subscripted_rvalue, value_bitstring_subscript and
4903 value_ptradd to use LONGEST instead of value as index
4904 argument type. Use value_ptradd instead of value_ptrsub.
4905 * ada-lang.c (ada_value_subscript, ada_value_ptr_subscript,
4906 ada_tag_name_2): Update.
4907 * ada-tasks.c (read_atcb): Update.
4908 * eval.c (evaluate_subexp_standard): Update.
4909 * valarith.c (value_subscript): Update.
4910 * gnu-v2-abi.c (gnuv2_virtual_fn_field): Update.
4911 * gnu-v3-abi.c (gnuv3_get_virtual_fn, gnuv3_baseclass_offset,
4912 gnuv3_method_ptr_to_value): Update.
4913 * jv-lang.c (evaluate_subexp_java): Update.
4914 * m2-lang.c (evaluate_subexp_modula2): Update.
4915 * python/python-value.c (valpy_getitem, valpy_binop): Update.
4916 * wrapper.c (gdb_value_subscript): Update.
4917 * varobj.c (c_describe_child): Update.
4919 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4921 * gdbtypes.h (make_function_type): Remove OBJFILE parameter.
4922 * gdbtypes.c (make_function_type): Remove OBJFILE parameter.
4923 (lookup_function_type): Update call.
4924 * stabsread.c (read_type): Likewise.
4925 * dwarf2read.c (read_subroutine_type): Use lookup_function_type
4926 instead of make_function_type.
4927 * jv-lang.c (type_from_class): Likewise. Do not allocate types
4928 on the fake "dynamics" obstack.
4930 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4932 * gdbtypes.h (struct builtin_type): Remove builtin_core_addr,
4933 nodebug_text_symbol, nodebug_data_symbol, nodebug_unknown_symbol,
4934 and nodebug_tls_symbol members.
4935 (struct objfile_type): New data structure.
4936 (objfile_type): Add prototype.
4937 * gdbtypes.c (gdbtypes_post_init): Remove initialization code
4938 for types no longer in struct builtin_type.
4939 (objfile_type_data): New static variable.
4940 (_initialize_gdbtypes): Initialize it.
4941 (objfile_type): New function.
4943 * gdbtypes.h (builtin_type_error): Remove.
4944 * gdbtypes.c (build_complex): Do not use builtin_type_error.
4945 * symtab.c (builtin_type_error): Remove.
4946 (_initialize_symtab): Remove initialization.
4948 * stabsread.c (dbx_lookup_type, define_symbol, error_type,
4949 rs6000_builtin_type, read_range_type): Use per-objfile types
4950 instead of global or per-architecture builtin types.
4951 * coffread.c (decode_type): Likewise.
4952 * dwarf2read.c (read_array_type, read_tag_string_type,
4953 new_symbol, die_type): Likewise.
4954 * mdebugread.c (parse_symbol, basic_type, upgrade_type,
4955 parse_procedure, psymtab_to_symtab_1): Likewise.
4956 * xcoffread.c (process_xcoff_symbol): Likewise.
4957 * parse.c (write_exp_msymbol): Likewise.
4959 * stabsread.c (rs6000_builtin_type_data): New static variable.
4960 (_initialize_stabsread): Initialize it.
4961 (rs6000_builtin_type): Add OBJFILE argument. Allocate builtin
4962 types per-objfile instead of globally.
4964 * stabsread.c (dbx_lookup_type): Add OBJFILE argument. Use it
4965 instead of current_objfile; pass it to rs6000_builtin_type.
4966 (dbx_alloc_type, read_type, read_range_type): Update calls.
4967 (cleanup_undefined_types_noname): Add OBJFILE argument and
4968 pass it to dbx_lookup_type.
4969 (cleanup_undefined_types): Add OBJFILE argument and pass it
4970 to cleanup_undefined_types_noname.
4971 * stabsread.h (cleanup_undefined_types): Add OBJFILE argument.
4972 * buildsym.c (end_symtab): Update call.
4974 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4976 * darwin-nat-info.c (darwin_debug_regions_recurse): Use
4977 target_gdbarch instead of current_gdbarch.
4979 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4981 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-windows-tdep.o.
4982 (ALL_TARGET_OBS): Add moxie-tdep.o, i386-darwin-tdep.o, and
4985 * configure.tgt: Add comment.
4987 2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
4989 * mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
4991 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
4992 Jan Kratochvil <jan.kratochvil@redhat.com>
4994 * NEWS: Document inlined function support.
4995 * Makefile.in (SFILES): Add inline-frame.c.
4996 (COMMON_OBS): Add inline-frame.o.
4997 * block.c (contained_in): Rewrite to use lexical nesting.
4998 (block_linkage_function): Skip inlined function blocks.
4999 (block_inlined_p): New.
5000 * block.h (struct block): Update comment.
5001 (block_inlined_p): New prototype.
5002 * blockframe.c (get_frame_block): Handle inlined functions.
5003 (get_frame_function): Do not use block_linkage_function.
5004 (block_innermost_frame): Use get_frame_block and contained_in.
5005 * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
5006 Skip over inlined functions. Simplify epilogue check.
5007 (bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
5009 (set_momentary_breakpoint): Only accept non-inlined frames.
5010 (watch_command_1): Use frame_unwind_caller_pc and
5011 frame_unwind_caller_id instead of get_prev_frame.
5012 (until_break_command): Likewise. Use get_stack_frame_id.
5013 * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
5014 * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
5015 * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
5016 (read_func_scope, new_symbol): Likewise. Handle arguments specially
5017 for inlined functions without call site information.
5018 (inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
5019 (die_specification): Treat DW_AT_abstract_origin as a specification.
5020 (read_type_die): Handle DW_TAG_inlined_subroutine.
5021 * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
5022 * frame.c (fprint_frame_id): Print inline depth.
5023 (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
5024 (skip_inlined_frames, get_stack_frame_id): New.
5025 (frame_unwind_caller_id): Use skip_inlined_frames.
5026 (frame_id_inlined_p): New.
5027 (frame_id_eq): Make the logic match the comments. Add inline_depth
5029 (frame_id_inner): Handle inlined functions.
5030 (frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
5031 (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
5032 (get_prev_frame_1): Check for inline frames. Split out frame
5033 allocation to get_prev_frame_raw.
5034 (get_prev_frame_raw): New function.
5035 (get_prev_frame): Handle inline frames.
5036 (get_frame_pc): Use frame_unwind_pc.
5037 (get_frame_address_in_block): Skip inlined frames on both sides.
5038 (pc_notcurrent): Delete.
5039 (find_frame_sal): Rewrite to handle inline call sites. Use
5040 get_frame_address_in_block.
5041 (deprecated_update_frame_pc_hack): Make static.
5042 * frame.h: Update comments.
5043 (struct frame_id): Add inline_depth.
5044 (enum frame_type): Add INLINE_FRAME.
5045 (frame_id_inlined_p, get_stack_frame_id): New prototypes.
5046 * gdbthread.h (struct thread_info): Add step_stack_frame_id field.
5047 * infcmd.c (set_step_frame): New function.
5048 (step_once): Use set_step_frame. Handle inlined functions.
5049 (until_next_command): Use set_step_frame.
5050 (finish_backward), finish_forward): Use get_stack_frame_id.
5051 (finish_command): Support inlined functions.
5052 * inferior.h (set_step_info): New prototype.
5053 * infrun.c (RESUME_ALL): Use minus_one_ptid.
5054 (clear_proceed_status): Clear step_stack_frame_id.
5055 (init_wait_for_inferior): Call clear_inline_frame_state.
5056 (init_execution_control_state): Make static.
5057 (set_step_info): New function.
5058 (init_thread_stepping_state): Do not set the symtab or line here.
5059 (stepped_in_from): New function.
5060 (handle_inferior_event): Handle inlined functions. Use set_step_info.
5061 (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
5062 (struct inferior_status): Add step_stack_frame_id.
5063 (save_inferior_status, restore_inferior_status): Save and restore
5064 step_stack_frame_id.
5065 * inline-frame.c, inline-frame.h: New files.
5066 * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
5067 * regcache.c (regcache_write_pc): Call reinit_frame_cache.
5068 * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
5069 * stack.c (frame_show_address): New.
5070 (print_frame_info, print_frame): Use it.
5071 (find_frame_funname): Use get_frame_function. Handle inlined blocks.
5072 (frame_info): Mark inlined functions.
5073 (backtrace_command_1): Use get_current_user_frame.
5074 (print_frame_local_vars, print_frame_label_vars): Update comments.
5075 (return_command): Refuse inlined functions.
5076 * symtab.c (lookup_symbol_aux_local): Stop at inlined function
5078 (find_function_start_sal): Avoid inlined functions.
5079 (completion_list_add_fields): New function.
5080 (default_make_symbol_completion_list): Use it. Use block_static_block
5081 and block_global_block. Check for inlined functions.
5082 (skip_prologue_using_sal): Avoid line number comparison across
5084 * symtab.h (struct symbol): Add is_inlined.
5085 (SYMBOL_INLINED): New.
5086 * target.c (target_resume): Call clear_inline_frame_state.
5087 * valops.c (value_of_variable): Check block_inlined_p.
5089 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
5091 * frame.c (frame_unwind_id): Renamed to ...
5092 (frame_unwind_caller_id): ... this. All callers updated.
5093 (frame_pc_unwind): Renamed to ...
5094 (frame_unwind_caller_pc): ... this. All callers updated.
5095 * frame.h: Document frame_unwind_caller_WHAT functions.
5096 (frame_unwind_id): Renamed to ...
5097 (frame_unwind_caller_id): ... this.
5098 (frame_pc_unwind): Renamed to ...
5099 (frame_unwind_caller_pc): ... this.
5100 * hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
5101 * stack.c (parse_frame_specification_1): Do not rely on
5104 2009-06-27 Michael Snyder <msnyder@vmware.com>
5106 * infrun.c (handle_inferior_event): Improve handling of
5107 reverse-stepping into and over shared library functions.
5109 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
5111 * linespec.c (find_method): Add new not_found_ptr parameter to
5112 bring in line with symtab_from_filename, decode_variable.
5113 (decode_compound): Likewise. Also propagate not_found_ptr to
5115 (decode_line_1): Propagate not_found_ptr to decode_compound.
5116 (cplusplus_error): Now throws NOT_FOUND_ERROR.
5118 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
5120 * MAINTAINERS (Write After Approval): Add self.
5122 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5124 * valops.c (value_one): Reimplement broken decimal-float case.
5126 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5128 * eval.c (evaluate_subexp_standard): Use expression architecture
5129 instead of current_gdbarch.
5131 * infrun.c (handle_inferior_event): Avoid unncessary reference
5132 to current_gdbarch and get_current_frame ().
5134 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5136 * breakpoint.h (set_longjmp_breakpoint): Add THREAD argument.
5137 (enum bptype): Add bp_longjmp_master.
5139 * breakpoint.c (create_longjmp_master_breakpoint): New function.
5140 (update_breakpoints_after_exec): Handle bp_longjmp_master
5141 breakpoints. Call create_longjmp_master_breakpoint.
5142 (print_it_typical, bpstat_stop_status, bpstat_what,
5143 print_one_breakpoint_location, allocate_bp_location, mention,
5144 delete_command, breakpoint_re_set_one): Handle bp_longjmp_master.
5145 (breakpoint_re_set): Call create_longjmp_master_breakpoint.
5146 (create_longjmp_breakpoint): Delete.
5147 (set_longjmp_breakpoint): Add THREAD argument. Reimplement
5148 to install momentary clones of bp_longjmp_master breakpoints.
5150 * infcmd.c (step_1): Pass thread to set_longjmp_breakpoint.
5152 2009-06-23 Cary Coutant <ccoutant@google.com>
5154 * dwarf2read.c (dwarf_decode_lines): Ignore rows where is_stmt is 0.
5155 Set basic_block to 0 after a special opcode.
5157 2009-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
5159 Fix a regression by the mmap patch from 2009-06-16.
5160 * symfile.c (reread_symbols): Move sym_finish and clear_objfile_data
5161 calls before deleting the OBJFILE obstack. Extend the comment.
5163 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5165 * jv-lang.h (JAVA_OBJECT_SIZE): Remove.
5166 (get_java_object_header_size): Add GDBARCH parameter.
5167 * jv-lang.c (get_java_object_header_size): Add GDBARCH parameter.
5168 Use it instead of current_gdbarch.
5169 (evaluate_subexp_java): Replace JAVA_OBJECT_SIZE with call to
5170 get_java_object_header_size.
5171 * jv-valprint.c (java_value_print): Likewise.
5173 2009-06-23 Sami Wagiaalla <swagiaal@redhat.com>
5175 * dwarf2read.c (process_die): Handle import statements
5176 (DW_TAG_imported_declaration, case DW_TAG_imported_module)
5177 (read_import_statement): New.
5178 (read_func_scope): Update using_directives to point to current context
5179 (read_lexical_block_scope): Ditto.
5180 * cp-support.h: Added prototype for cp_add_using.
5181 * cp-namespace.c: Removed local context_stack.
5182 (cp_initialize_namespace): Deleted.
5183 (cp_finalize_namespace): Deleted.
5184 (cp_add_using_directive): Use using_directives instead of using_list.
5185 (cp_add_using): No longer static.
5186 * buildsym.h: Created global using_direct variable.
5187 Created using_direct variable in context_stack.
5188 * buildsym.c (finish_block): Set using directives for the block under
5190 (start_symtab): Removed call to cp_initialize_namespace().
5191 (end_symtab): Removed call to cp_finalize_namespace().
5192 (push_context): Save and reset using_directives.
5193 * block.c (block_using): Return using directives for given
5194 block instead of static block.
5196 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5198 * target-descriptions.h (struct type): Do not declare.
5199 (struct tdesc_type): Declare.
5200 (tdesc_named_type): Change return type to struct tdesc_type *.
5201 (tdesc_record_type): Remove.
5202 (tdesc_create_vector): Add prototype.
5203 (tdesc_create_union): Likewise.
5204 (tdesc_add_field): Likewise.
5206 * target-descriptions.c (struct tdesc_reg): Replace gdb_type
5207 member by tdesc_type member.
5208 (struct tdesc_type_field, tdesc_type_field): Add type and vector def.
5209 (struct tdesc_type, tdesc_type_p): Likewise.
5210 (struct tdesc_arch_reg, tdesc_arch_reg): Likewise.
5211 (struct tdesc_feature): Change type of "types" to VEC(tdesc_type_p).
5212 (struct tdesc_arch_data): Replace registers member by arch_regs.
5214 (tdesc_predefined_types): Change to array of pre-defined
5215 struct tdesc_type structures. Add "code_ptr" and "data_ptr".
5216 (tdesc_named_type): Return struct tdesc_type * instead of GDB type.
5217 (tdesc_gdb_type): New function.
5219 (target_find_description): Update for data structure changes.
5220 (tdesc_data_cleanup): Likewise.
5221 (tdesc_numbered_register): Likewise.
5222 (tdesc_use_registers): Likewise.
5223 (tdesc_create_reg): Likewise.
5225 (tdesc_find_arch_register): New function.
5226 (tdesc_find_register): Use it.
5227 (tdesc_register_type): Use tdesc_gdb_type to generate GDB type from
5228 tdesc_type on demand; cache generated types in tdesc_arch_reg.
5230 (tdesc_free_type): New function.
5231 (tdesc_free_feature): Call it.
5233 (tdesc_create_vector): New function.
5234 (tdesc_create_union): Likewise.
5235 (tdesc_add_field): Likewise.
5236 (tdesc_record_type): Remove.
5238 (tdesc_type_id): Remove.
5239 (maint_print_c_tdesc_cmd): Update for data structure changes. Update
5240 generated code to create tdesc_type structures instead of GDB types.
5242 * xml-tdesc.c: Do not include "gdbtypes.h".
5243 (struct tdesc_parsing_data): Change type of current_union to
5244 struct tdesc_type *.
5245 (tdesc_start_reg): Do not special-case "code_ptr" or "data_ptr".
5246 (tdesc_start_union): Call tdesc_create_union.
5247 (tdesc_start_field): Call tdesc_add_field.
5248 (tdesc_start_vector): Call tdesc_create_vector.
5249 (tdesc_end_union): Remove.
5250 (feature_children): Remove reference to tdesc_end_union.
5252 * features/arm-with-iwmmxt.c: Regenerate.
5253 * features/mips-linux.c: Regenerate.
5254 * features/mips64-linux.c: Regenerate.
5255 * features/rs6000/powerpc-32.c: Regenerate.
5256 * features/rs6000/powerpc-32l.c: Regenerate.
5257 * features/rs6000/powerpc-403.c: Regenerate.
5258 * features/rs6000/powerpc-403gc.c: Regenerate.
5259 * features/rs6000/powerpc-505.c: Regenerate.
5260 * features/rs6000/powerpc-601.c: Regenerate.
5261 * features/rs6000/powerpc-602.c: Regenerate.
5262 * features/rs6000/powerpc-603.c: Regenerate.
5263 * features/rs6000/powerpc-604.c: Regenerate.
5264 * features/rs6000/powerpc-64.c: Regenerate.
5265 * features/rs6000/powerpc-64l.c: Regenerate.
5266 * features/rs6000/powerpc-7400.c: Regenerate.
5267 * features/rs6000/powerpc-750.c: Regenerate.
5268 * features/rs6000/powerpc-860.c: Regenerate.
5269 * features/rs6000/powerpc-altivec32.c: Regenerate.
5270 * features/rs6000/powerpc-altivec32l.c: Regenerate.
5271 * features/rs6000/powerpc-altivec64.c: Regenerate.
5272 * features/rs6000/powerpc-altivec64l.c: Regenerate.
5273 * features/rs6000/powerpc-e500.c: Regenerate.
5274 * features/rs6000/powerpc-e500l.c: Regenerate.
5275 * features/rs6000/powerpc-isa205-32l.c: Regenerate.
5276 * features/rs6000/powerpc-isa205-64l.c: Regenerate.
5277 * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
5278 * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
5279 * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
5280 * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
5281 * features/rs6000/powerpc-vsx32.c: Regenerate.
5282 * features/rs6000/powerpc-vsx32l.c: Regenerate.
5283 * features/rs6000/powerpc-vsx64.c: Regenerate.
5284 * features/rs6000/powerpc-vsx64l.c: Regenerate.
5285 * features/rs6000/rs6000.c: Regenerate.
5287 2009-06-23 Joel Brobecker <brobecker@adacore.com>
5289 * ada-lang.c (decode_packed_array): If the value is a pointer to
5290 an array, then use value_ind to dereference it, not ada_value_ind.
5291 (ada_template_to_fixed_record_type_1): Handle the case where a
5292 dynamic field is an aligner type.
5293 (to_fixed_array_type): Add handling for packed array types.
5294 (ada_get_base_type): Do not follow the XVS type if the type is
5296 (ada_evaluate_subexp): Split a few statements up for clarity
5298 <OP_FUNCALL>: Add handling of the case of a packed array that
5299 has already been fixed.
5301 2009-06-23 Joel Brobecker <brobecker@adacore.com>
5303 * ada-lang.c (evaluate_subexp): Delete. Use the version from eval.c.
5304 (evaluate_subexp_type): Reimplement using evaluate_subexp.
5305 * value.h (evaluate_subexp): Add declaration.
5306 * eval.c (evaluate_subexp): Make non-static.
5307 * objc-lang.c (print_object_command): Use evaluate_subexp.
5309 2009-06-23 Paul Pluzhnikov <ppluzhnikov@google.com>
5311 Revert 2009-05-14 breakpoint commit (no longer needed).
5312 * breakpoint.h (breakpoint_re_set_objfile): Remove
5313 * breakpoint.c (breakpoint_re_set_objfile): Likewise
5314 (create_overlay_event_breakpoint): Remove objfile parameter,
5315 iterate over all objfiles.
5316 * objfiles.c (objfile_relocate): Update.
5317 * symfile.c (new_symfile_objfile): Likewise.
5319 2009-06-23 Tom Tromey <tromey@redhat.com>
5322 * c-lang.c (classify_type): Iterate over typedefs.
5323 * c-valprint.c (textual_element_type): Iterate over typedefs.
5325 2009-06-22 Tristan Gingold <gingold@adacore.com>
5327 * darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
5330 2009-06-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5333 * buildsym.c (block_compar): New function.
5334 (end_symtab): Replace the bubble sort by a qsort based code.
5336 2009-06-22 Sami Wagiaalla <swagiaal@redhat.com>
5338 * MAINTAINERS (Write After Approval): Add self.
5340 2009-06-22 Ulrich Weigand <uweigand@de.ibm.com>
5342 * spu-tdep.c (spu_get_longjmp_target): New function.
5343 (spu_gdbarch_init): Install it.
5345 2009-06-22 H.J. Lu <hongjiu.lu@intel.com>
5348 * remote.c (getpkt_or_notif_sane_1): Initialize val to -1.
5350 2009-06-21 Michael Snyder <msnyder@vmware.com>
5352 * inferior.h: Update ancient comment.
5354 2009-06-20 Aleksandar Ristovski <aristovski@qnx.com>
5355 Pedro Alves <pedro@codesourcery.com>
5357 * solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
5359 (scan_dyntag): Skip if input bfd isn't elf flavoured.
5360 (locate_base): Call elf_locate_base even without an exec_bfd.
5362 2009-06-19 Samuel Bronson <naesten@gmail.com>
5365 * cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
5366 for prefix commands to avoid duplicates in the output.
5368 2009-06-19 Samuel Bronson <naesten@gmail.com>
5371 * cli/cli-decode.c (apropos_cmd): Fix avoidance of double
5374 2009-06-19 Jerome Guitton <guitton@adacore.com>
5376 * breakpoint.c (expand_line_sal_maybe): When explicit_line,
5377 skip prologue on each sals.
5378 (skip_prologue_sal): Return explicit_line and explicit_pc
5381 2009-06-19 Tristan Gingold <gingold@adacore.com>
5383 * darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
5386 2009-06-19 Tristan Gingold <gingold@adacore.com>
5387 * machoread.c (macho_symtab_read): Adjust for bfd changes.
5388 * darwin-nat.h (struct darwin_exception_msg): New type to describe
5390 (struct private_thread_info): New type to describe the state of the
5392 (DEF_VEC_I thread_t): Removed, replaced by ...
5393 (DEF_VEC_O darwin_thread_t): ... this new type.
5394 (struct darwin_inferior): Renamed to ...
5395 (struct private_inferior): ... this type. Fields added.
5396 (darwin_not_port): Moved into the private inferior structure.
5397 * darwin-nat.c: Add includes, improve comments.
5398 Rewrite to handle multiple threads and processes.
5399 (darwin_resume_to): New function and protype.
5400 (darwin_resume, darwin_wait_to, darwin_wait): Ditto.
5401 (darwin_kill_inferior): Add ops argument.
5402 (darwin_pid_to_str): New function.
5403 (darwin_thread_alive): Ditto.
5404 (darwin_inf, darwin_not_port): Removed.
5405 (darwin_inf_fake_stop): New variable.
5406 (msgin, msgout, msg_state, exc_msg): Removed.
5407 (mach_check_error): Use warning instead of error.
5408 (darwin_ptrace): Adjust debug level.
5409 (cmp_thread_t): Fix names (typo).
5410 (darwin_check_new_threads): Argument is now an inferior,
5411 adjust for new structures, add no change check, ignore dead ports,
5412 handle first thread case.
5413 (find_inferior_task_it): New function.
5414 (find_inferior_notify_it): Ditto.
5415 (darwin_find_inferior_by_task): Ditto.
5416 (darwin_find_inferior_by_notify): Ditto.
5417 (darwin_find_thread): Ditto.
5418 (darwin_suspend_inferior): Ditto.
5419 (darwin_resume_inferior): Ditto.
5420 (catch_exception_raise_state): Removed.
5421 (catch_exception_raise_state_identity): Removed.
5422 (darwin_suspend_inferior_it): New function.
5423 (darwin_resume_inferior_it): Ditto.
5424 (darwin_dump_message): New function, extracted from darwin_wait.
5425 (darwin_decode_exception_message): New function.
5426 (darwin_encode_reply): New function.
5427 (catch_exception_raise): Removed.
5428 (darwin_send_reply): New function, extracted from darwin_resume.
5429 (darwin_resume_thread): New function, extracted from darwin_resume.
5430 (struct resume_inferior_threads_param): New type.
5431 (darwin_resume_inferior_threads_it): New function.
5432 (darwin_resume_inferior_threads): New function.
5433 (darwin_suspend_inferior_threads): New function.
5434 (darwin_resume): Mostly rewritten to handle multiple threads and
5436 (darwin_decode_message): New function extracted from darwin_wait.
5437 (cancel_breakpoint): New function.
5438 (darwin_wait): Mostly rewritten. Handle multiple threads.
5439 (darwin_mourn_inferior): Adjust for per process structures.
5440 (darwin_reply_to_all_pending_messages): New function.
5441 (darwin_stop_inferior): Adjust for per inferior structures.
5442 (darwin_attach_pid): Ditto.
5443 (darwin_init_thread_list): Ditto.
5444 (darwin_attach): Ditto.
5445 (darwin_detach): Ditto.
5446 (darwin_files_info): Now empty.
5447 (darwin_pid_to_str): Adjust returns string to match one expected by
5449 (darwin_read_write_inferior): Rename err variable to match other uses.
5450 Adjust debug message. Handle submaps.
5451 (darwin_xfer_memory): Adjust for per inferior structures.
5452 (set_enable_mach_exceptions): Ditto.
5453 (darwin_pid_to_exec_file): New function.
5454 (darwin_get_ada_task_ptid): Ditto.
5455 (darwin_supports_multi_process): Ditto.
5456 (_initialize_darwin_inferior): Remove useless assertion, adjust for
5457 per inferior structures. Add new target operations.
5459 2009-06-18 Hui Zhu <teawater@gmail.com>
5460 Michael Snyder <msnyder@vmware.com>
5462 * infrun.c (handle_inferior_event): Improve reverse stepping
5463 through function epilogue.
5465 * infrun.c (handle_inferior_event): Reverse-next through
5468 2009-06-18 Paul Pluzhnikov <ppluzhnikov@google.com>
5470 * dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
5473 2009-06-17 Tom Tromey <tromey@redhat.com>
5475 * dwarf2read.c (zlib_decompress_section): Use a cleanup.
5477 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5479 * gdbarch.sh (pointer_to_address): Change to type 'm'.
5480 (address_to_pointer): Likewise.
5481 * gdbarch.c, gdbarch.h: Regenerate.
5483 * inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
5484 (signed_pointer_to_address): Likewise.
5485 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
5486 * findvar.c (unsigned_pointer_to_address): Likewise.
5487 (signed_pointer_to_address): Likewise.
5488 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
5490 * avr-tdep.c (avr_address_to_pointer): Likewise.
5491 (avr_pointer_to_address): Likewise.
5492 * iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
5493 (iq2000_address_to_pointer): Likewise.
5494 * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
5495 (m32c_m16c_pointer_to_address): Likewise.
5496 * spu-tdep.c (spu_pointer_to_address): Likewise.
5497 * xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
5498 (xstormy16_address_to_pointer): Likewise.
5500 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5502 * printcmd.c (print_scalar_formatted): Always truncate
5503 unsigned data types.
5505 * cli-dump.c (struct callback_data): Change type of load_offset
5507 (restore_binary_file): Update type casts.
5508 (restore_command): Parse load_offset as address, not long.
5510 * utils.c (string_to_core_addr): Do not sign-extend value.
5511 * varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
5512 before comparing against requested frame address.
5514 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5516 * gdbarch.sh (gcore_bfd_target): New gdbarch callback.
5517 * gdbarch.h, gdbarch.c: Regenerate.
5519 * gcore.c (default_gcore_target): Make return value const.
5520 Call gdbarch_gcore_bfd_target if present.
5521 (default_gcore_arch, default_gcore_mach): Use target_gdbarch.
5523 * corelow.c (core_read_description): Call gdbarch_core_read_description
5524 on core_gdbarch instead of current_gdbarch.
5526 * ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.
5528 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5530 * gdbtypes.c (create_string_type): Receive character type as argument.
5531 * gdbtypes.h (create_string_type): Add character type argument.
5532 * dwarf2read.c (read_tag_string_type): Pass character type to
5535 * value.h (value_string): Add character type argument.
5536 * valops.c (value_string): Add character type argument. Pass it to
5537 create_string_type. Do not allocate space in inferior.
5538 * valarith.c (value_concat): Pass character type to value_string.
5540 * value.h (value_typed_string): Rename to ...
5541 (value_cstring): ... this.
5542 * valops.c (value_typed_string): Rename to ...
5543 (value_cstring): ... this.
5544 * c-lang.c (evaluate_subexp_c): Update.
5546 * python/python-value.c (builtin_type_pychar): New define.
5547 (convert_value_from_python): Call value_cstring instead
5548 of value_from_string.
5549 * value.c (value_from_string): Remove.
5550 * value.h (value_from_string): Remove.
5552 * eval.c (evaluate_subexp_standard): Pass character type to
5553 value_string. Pass expression architecture to value_nsstring
5554 and lookup_child_selector.
5555 * objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
5556 (lookup_child_selector): Likewise.
5557 (value_nsstring): Likewise.
5558 * objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
5559 Pass character type to value_string..
5560 (lookup_child_selector): Likewise.
5561 (value_nsstring): Add GDBARCH parameter, use it instead of
5562 objfile architecture. Pass architecture to lookup_objc_class
5563 and lookup_child_selector. Pass character type to value_string.
5564 (end_msglist): Pass architecture to lookup_objc_class.
5565 * objc-exp.y: Pass architecture to lookup_objc_class.
5567 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5569 * gdbtypes.h (struct language_defn): Add forward declaration.
5570 (lookup_typename): Add LANGUAGE and GDBARCH parameters.
5571 (lookup_unsigned_typename): Likewise.
5572 (lookup_signed_typename): Likewise.
5573 * gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
5574 Use them instead of current_language and current_gdbarch.
5575 (lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
5576 Pass them to lookup_typename.
5577 (lookup_signed_typename): Likewise.
5579 * c-exp.y: Pass parse_language and parse_gdbarch to
5580 lookup_unsigned_typename and lookup_signed_typename.
5581 * objc-exp.y: Likewise.
5582 * m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.
5584 * c-lang.c (evaluate_subexp_c): Pass expression language and
5585 gdbarch to lookup_typename.
5586 * printcmd.c (printf_command): Pass current language and
5587 gdbarch to lookup_typename.
5588 * python/python-type.c (typy_lookup_typename): Likewise.
5589 Include "language.h".
5591 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5593 * sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
5594 Use it instead of current_gdbarch. Pass architecture to
5595 sparc32_gregset_supplies_p.
5596 (sparc64_fpregset_supplies_p): Add GDBARCH parameter. Use it instead
5597 of current_gdbarch. Pass architecture to sparc32_fpregset_supplies_p.
5598 * sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
5599 sparc64nbsd_fpregset_supplies_p): Likewise.
5600 * sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
5601 Add GDBARCH parameter.
5602 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
5603 (sparc_fetch_inferior_registers): Pass regcache architecture to
5604 sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
5605 (sparc_store_inferior_registers): Likewise.
5606 * sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
5607 Add GDBARCH parameter.
5608 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
5610 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5612 * ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
5614 * aix-thread.c (pd_enable): Likewise.
5615 * amd64-linux-nat.c (ps_get_thread_area): Likewise.
5616 * bsd-uthread.c (bsd_uthread_activate): Likewise.
5617 * linux-nat.c (linux_nat_info_proc_cmd): Likewise.
5618 * linux-thread-db.c (enable_thread_event): Likewise.
5619 * monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
5620 * nto-procfs.c (procfs_open): Likewise.
5621 * procfs.c (invalidate_cache, procfs_insert_watchpoint,
5622 info_proc_mappings, info_mappings_callback): Likewise.
5623 * record.c (record_open): Likewise.
5624 * rs6000-nat.c (ARCH64): Likewise.
5625 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
5626 (darwin_bfd_open): Likewise.
5627 * memattr.c (mem_info_command): Likewise.
5629 * windows-nat.c (win32_resume): Use current regcache architecture
5630 instead of current_gdbarch.
5632 * dbug-rom.c (dbug_regname): Remove check against number of
5633 registers in current_gdbarch.
5634 * solib-pa64.c (read_dynamic_info): Remove unused variable.
5636 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5638 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
5639 use it instead of current_gdbarch.
5640 * frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
5641 * arm-tdep.c (arm_skip_prologue): Pass architecture to
5642 deprecated_pc_in_call_dummy.
5644 * symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
5645 Use it instead of current_gdbarch.
5646 * symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
5647 * breakpoint.c (expand_line_sal_maybe): Pass architecture to
5648 skip_prologue_using_sal.
5649 * arm-tdep.c (skip_prologue_using_sal): Likewise.
5650 * lm32-tdep.c (lm32_skip_prologue): Likewise.
5651 * m32-tdep.c (m32c_skip_prologue): Likewise.
5652 * mips-tdep.c (mips_skip_prologue): Likewise.
5653 * moxie-tdep.c (moxie_skip_prologue): Likewise.
5654 * mt-tdep.c (mt_frame_unwind_cache): Likewise.
5655 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
5656 * frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
5657 it to skip_prologue_using_sal. Update call sites ...
5658 (frv_skip_prologue, frv_frame_unwind_cache): ... here.
5660 * mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
5661 (check_for_saved): Use it instead of current_gdbarch.
5662 (mn10300_analyze_prologue): Set it.
5664 * value.c (using_struct_return): Add GDBARCH parameter. Use it
5665 instead of current_gdbarch.
5666 * value.h (using_struct_return): Add GDBARCH parameter.
5667 * eval.c (evaluate_subexp_standard): Pass architecture to
5668 using_struct_return.
5669 * infcall.c (call_function_by_hand): Likewise.
5670 * stack.c (return_command): Likewise.
5671 * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
5673 * symtab.c (in_prologue): Add GDBARCH parameter. Use it instead of
5675 * symtab.h (in_prologue): Add GDBARCH parameter.
5676 * infrun.c (handle_inferior_event): Pass architecture to in_prologue.
5678 * eval.c (evaluate_subexp_standard): Use expression architecture
5679 instead of current_gdbarch.
5681 * c-lang.c (evaluate_subexp_c): Use expression architecture and
5682 language instead of current_gdbarch and current_language.
5684 * printcmd.c (do_one_display): Use expression architecture instead
5687 * infcmd.c (print_return_value): Use architecture of stop_regcache
5688 instead of current_gdbarch.
5689 (print_vector_info, print_float_info): Remove GDBARCH argument,
5690 use frame architecture instead.
5691 (vector_info, float_info): Update calls.
5693 * objc-lang.c (objc_skip_trampoline): Use frame architecture
5694 instead of current_gdbarch.
5696 * parse.c (write_dollar_variable): Use parse architecture instead
5699 * source.c (line_info): Use objfile architecture instead of
5702 * symtab.c (find_function_start_sal): Use gdbarch instead of
5704 (print_msymbol_info): Use objfile architecture instead of
5707 * valops.c (value_assign): Use frame architecture instead of
5710 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5712 * buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.
5714 * coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
5715 calling record_line.
5716 (enter_linenos): Likewise.
5717 * dbxread.c (process_one_symbol): Likewise.
5718 * dwarf2read.c (dwarf_decode_lines): Likewise.
5719 * mdebugread.c (psymtab_to_symtab_1): Likewise.
5720 * xcoffread.c (enter_line_range): Likewise.
5722 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5724 * ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
5725 architecture instead of current_gdbarch.
5726 (gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
5727 (gen_expr): Pass expression to get_struct_ref.
5729 * symtab.h (struct symbol_ops): Add GDBARCH parameter to
5730 tracepoint_var_ref callback.
5731 * ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
5732 symbol operation callback.
5733 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
5734 Use it instead of current_gdbarch.
5735 (locexpr_tracepoint_var_ref): Add GDBARCH parameter. Pass it to
5736 dwarf2_tracepoint_var_ref.
5737 (loclist_tracepoint_var_ref): Likewise.
5739 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5741 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
5742 Use it instead of address bits of current_gdbarch.
5743 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
5744 * arm-tdep.c (thumb_analyze_prologue): Pass address bits to
5746 (arm_scan_prologue): Likewise.
5747 * m32c-tdep.c (m32c_analyze_prologue): Likewise.
5748 * mep-tdep.c (mep_analyze_prologue): Likewise.
5749 * mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
5750 * s390-tdep.c (s390_analyze_prologue): Likewise.
5752 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5754 * mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
5755 frame architecture instead of current_gdbarch.
5756 (mi_cmd_data_list_changed_registers): Likewise.
5757 (mi_cmd_data_list_register_values): Likewise. Pass selected
5758 frame to get_register.
5759 (get_register): Add FRAME argument, use it as frame to retrieve
5760 registers from (instead of selected frame). Use frame architecture
5761 instead of current_gdbarch.
5762 (mi_cmd_data_write_register_values): Use current regcache
5763 architecture instead of current_gdbarch.
5765 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5767 * tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
5768 use frame architecture instead. Replace current_gdbarch uses.
5769 (tui_show_registers): Update call.
5770 (tui_get_register): Remove GDBARCH parameter; use frame architecture
5772 (tui_show_register_group): Update call.
5773 (tui_check_register_values): Likewise.
5774 (tui_register_format): Remove GDBARCH parameter; use frame
5775 architecture instead. Replace current_gdbarch uses.
5776 (tui_get_register): Update call.
5778 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5780 * gdbarch.sh (construct_inferior_arguments): Remove.
5781 * gdbarch.c, gdbarch.h: Regenerate.
5782 * infcmd.c (get_inferior_args): Call construct_inferior_arguments
5783 directly instead of gdbarch_construct_inferior_arguments.
5784 (construct_inferior_arguments): Remove GDBARCH argument.
5785 * inferior.h (construct_inferior_arguments): Likewise.
5787 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5789 * symfile.c (section_is_mapped): Use objfile architecture instead
5791 (TARGET_LONG_BYTES): Remove.
5792 (read_target_long_array): Add SIZE argument. Use it instead of
5794 (simple_read_overlay_table): Retrieve long size from objfile
5795 architecture; pass it to read_target_long_array.
5796 (simple_read_overlay_region_table): Likewise.
5797 (simple_overlay_update_1): Likewise.
5799 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5801 * infrun.c (cleanup_displaced_step_closure): Remove.
5802 (displaced_step_clear_cleanup): Move to before displaced_step_prepare.
5803 (displaced_step_prepare): Use displaced_step_clear_cleanup instead
5804 of cleanup_displaced_step_closure.
5805 (handle_inferior_event, keep_going): Use thread architecture instead
5808 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5810 * infrun.c (handle_inferior_event): Use current frame architecture
5811 or thread architecture instead of current_gdbarch. Pass to
5812 handle_step_into_function and handle_step_into_function_backward.
5813 (handle_step_into_function): Add GDBARCH parameter. Use it instead
5815 (handle_step_into_function_backward): Likewise.
5816 (insert_step_resume_breakpoint_at_frame): Use frame architecture
5817 instead of current_gdbarch.
5818 (insert_step_resume_breakpoint_at_caller): Likewise.
5820 2009-06-17 Pierre Muller <muller@ics.u-strasbg.fr>
5821 Pedro Alves <pedro@codesourcery.com>
5823 * infcmd.c (post_create_inferior): Call breakpoint_re_set after target
5824 is pushed for watchpoint promotion to hardware watchpoint.
5826 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
5828 * dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
5829 (dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
5830 (dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
5831 (dwarf_ranges_section, dwarf_frame_section)
5832 (dwarf_eh_frame_section): Removed.
5833 (dwarf2_resize_section): Likewise.
5834 (dwarf2_read_section): Now static, use bfd_mmap() if possible.
5835 (dwarf2_get_section_info): New function.
5836 (munmap_section_buffer): Likewise.
5837 (dwarf2_per_objfile_cleanup): Likewise.
5838 (section_is_p): Signature change.
5839 * dwarf2-frame.c (dwarf2_build_frame_info): Use
5840 dwarf2_get_section_info instead of dwarf2_read_section.
5842 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
5844 * solib.c (symbol_add_stub): New FLAGS parameter.
5845 (solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
5847 (solib_add): Defer breakpoint_re_set until after all solibs.
5848 * bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
5849 * rs6000-nat.c (objfile_symbol_add): Adjust.
5850 * symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
5851 (new_symfile_objfile): Likewise.
5852 (symbol_file_add_with_addrs_or_offsets): Likewise.
5853 (symbol_file_add_from_bfd): Likewise.
5854 (symbol_file_add): Likewise.
5855 * symfile.h (enum symfile_add_flags): New. Adjust prototypes.
5856 * symfile-mem.c (symbol_file_add_from_memory): Adjust.
5857 * windows-nat.c (safe_symbol_file_add_stub): Adjust.
5858 * machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
5860 2009-06-16 Keith Seitz <keiths@redhat.com>
5862 * linespec.c (collect_methods): Delete.
5863 (add_matching_methods): Reove destructor special case.
5864 (find_method): Call find_methods directly instead of
5866 * valops.c (value_struct_elt): Remove destructor
5868 (check_field): Likewise.
5869 (value_struct_elt_for_reference): Likewise.
5870 (destructor_name_p): Remove misleading comment about dtors
5871 being "special cases".
5872 * gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
5873 * gdbtypes.c (get_destructor_fn_field): Likewise.
5875 2009-06-16 Pedro Alves <pedro@codesourcery.com>
5877 * mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
5878 TARGET_OJECT_MEMORY reads to the topmost target, not to the
5879 flattened current_target.
5881 2009-06-16 Tristan Gingold <gingold@adacore.com>
5883 * avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
5885 (avr_register_name): Add const to register_names.
5886 (avr_scan_arg_moves): Move inside avr_scan_prologue.
5887 (avr_scan_prologue): Add pc_end argument.
5888 Only read prologue bytes that can be read.
5889 Limit the scan to the known prologue length.
5890 Makes pattern variables static and const.
5892 (avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
5894 (avr_breakpoint_from_pc): Constify avr_break_insn.
5895 (avr_extract_return_value): Fix function comment.
5896 (avr_frame_unwind_cache): Fix GNU style violations.
5897 Pass current_pc argument to avr_scan_prologue to stop prologue
5898 analysis to the current pc. This fixes the bug with the 'next'
5900 Correctly set the SP register of the previous frame (use call_length).
5901 (avr_frame_prev_register): Fix indentation.
5902 Correctly read PC from the stack on avr6 architectures.
5903 (avr_push_dummy_call): Fix indentation.
5904 (avr_gdbarch_init): Set call_length according to the architecture.
5906 2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
5908 * infcall.c (show_unwind_on_terminating_exception_p): New
5910 (call_function_by_hand): Create breakpoint and clean-up call for
5911 std::terminate.breakpoint. Add unwind_on_terminating_exception_p
5912 gate. Pop frame on breakpoint hit.
5913 (_initialize_infcall): Add add_setshow_boolean_cmd for
5914 unwind-on-terminating-exception.
5916 2009-06-12 Kevin Buettner <kevinb@redhat.com>
5918 * dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
5919 `has_section_at_zero' flag from stripped objfile to separate,
5920 debug info only, objfile.
5922 2009-06-12 Pedro Alves <pedro@codesourcery.com>
5924 * exec.h (section_table_xfer_memory_partial): Improve description,
5925 mention SECTION_NAME.
5926 * exec.c (section_table_xfer_memory_partial): Remove stale
5929 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5931 * nto-tdep.h (nto_generic_supply_gpregset)
5932 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
5933 * nto-tdep.c (nto_generic_supply_gpregset)
5934 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
5936 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5938 * i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
5939 (i386nto_sigcontext_addr): Change the way context address is calculated.
5940 (i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
5941 sc_sp_offset and set sc_reg_offset and sc_num_regs.
5943 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5945 * i386-nto-tdep.c (i386_nto_target): Remove definition.
5946 (init_i386nto_ops): Use macros to set fields to global
5947 current_nto_target directly.
5948 (i386nto_init_abi): Remove unused nto_set_target call.
5949 * nto-tdep.h (nto_set_target): Remove unused declaration.
5950 * nto-tdep.c (nto_set_target): Remove unused function.
5952 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5954 * breakpoint.c (break_command_really): Rename local variable
5955 breakpoint_chain to bkpt_chain.
5957 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5959 Add support for XMM registers.
5960 * i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
5961 (i386nto_register_area): Correctly calculate offsets and sizes for
5962 all supported registers.
5964 2009-06-11 Tom Tromey <tromey@redhat.com>
5966 * eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
5967 'static' from local variable definitions.
5969 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5971 * symtab.c (append_expanded_sal): Remove unused local variables.
5973 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5975 * infrun.c (sched_multi): New global.
5976 (resume): If sched_multi is set, resume only threads of the
5978 (prepare_to_proceed): Don't switch over to wait_ptid if we're
5979 resuming a different inferior, and sched_multi is off.
5980 (show_schedule_multiple): New.
5981 (_initialize_infrun): Register new "set schedule-multiple" command.
5982 * inferior.h (sched_multi): Declare.
5983 * NEWS: Mention new "schedule-multiple" setting.
5985 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5987 * varobj.c (varobj_create): Properly restore the selected frame.
5989 2009-06-05 Tom Tromey <tromey@redhat.com>
5991 * inferior.c (print_inferior): Make a table, not a list. Emit
5994 2009-06-10 Jonas Maebe <jonas.maebe@elis.ugent.be>
5996 * darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
5997 darwin_wait (blocking wait).
5998 (darwin_kill_inferior): Likewise.
6000 2009-06-10 Pedro Alves <pedro@codesourcery.com>
6002 * infrun.c (handle_inferior_event): Update comment around trying
6003 to revert back to a stepping thread that has exited.
6005 2009-06-10 Cary Coutant <ccoutant@google.com>
6007 * dwarf2read.c (dwarf_decode_lines): Recognize and ignore
6008 DW_LNE_set_discriminator.
6010 2009-06-10 Pierre Muller <muller@ics.u-strasbg.fr>
6012 * breakpoint.c: ARI fixes.
6013 (create_overlay_event_breakpoint): Avoid assignment inside if statement.
6014 (print_one_breakpoint_location): Likewise.
6015 (create_longjmp_breakpoint): Likewise.
6016 (tracepoint_save_command): Likewise
6017 (bpstat_find_step_resume_breakpoint): No operator at end of line.
6018 (bpstat_stop_status): Likewise.
6019 (describe_other_breakpoints): Likewise.
6020 (hw_watchpoint_used_count): Likewise.
6021 (expand_line_sal_maybe): Likewise.
6022 (break_command_really): Likewise.
6023 (delete_command): Likewise.
6024 (do_enable_breakpoint): Likewise.
6025 (delete_trace_command): Likewise.
6026 (catch_exception_command_1): Likewise and remove extra parentheses.
6028 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
6030 * breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
6031 "ubreak" command that does not exist.
6033 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
6035 * cli/cli-decode.c (add_alias_cmd): Correct assertion.
6037 2009-06-07 Pedro Alves <pedro@codesourcery.com>
6039 * hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
6041 2009-06-07 Pedro Alves <pedro@codesourcery.com>
6044 * proc-utils.h (procfs_first_available): Don't declare here.
6045 * sol-thread.c: Include procfs.h instead of sys/procfs.h and
6047 * procfs.c: Include procfs.h.
6048 (procfs_target): Make it public. Don't register
6049 procfs_can_use_hw_breakpoint here.
6050 (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
6051 defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
6052 (procfs_can_use_hw_breakpoint): Remove check of
6053 TARGET_HAS_HARDWARE_WATCHPOINTS.
6054 (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
6056 (_initialize_procfs): Don't add the procfs target here.
6058 * i386-sol2-nat.c: Include target.h and procfs.h.
6059 (_initialize_amd64_sol2_nat): Install the procfs target here,
6060 customized with watchpoints support.
6061 * irix5-nat.c: Include target.h.
6062 (_initialize_core_irix5): Rename to ...
6063 (_initialize_irix5_nat): ... this. Install the procfs target
6064 here, customized with watchpoints support.
6065 * alpha-nat.c: Include procfs.h.
6066 (_initialize_core_alpha): Rename to...
6067 (_initialize_alpha_nat): ... this. Install the procfs target
6068 here, customized with watchpoints support.
6069 * sparc-sol2-nat.c: Include target.h and procfs.h.
6070 (_initialize_sparc_sol2_nat): New.
6072 * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
6073 * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
6074 * config/mips/irix5.mh (NAT_FILE): Delete.
6075 * config/mips/irix6.mh (NAT_FILE): Delete.
6076 * config/mips/nm-irix5.h: Delete.
6078 20009-06-07 Pedro Alves <pedro@codesourcery.com>
6080 * auxv.c (procfs_xfer_auxv): Change type of the `object' argument
6081 to enum target_object. Cleanup comments.
6082 * auxv.h: Include "target.h". Cleanup comments to not mention
6083 NATIVE_XFER_AUXV anymore.
6085 2009-06-07 Pedro Alves <pedro@codesourcery.com>
6087 * inferior.h (procfs_first_available): Move declaration to...
6088 * proc-utils.h: ... here.
6089 * sol-thread.c: Include procfs.h and proc-utils.h.
6091 2009-06-07 Pedro Alves <pedro@codesourcery.com>
6093 * inferior.h (proc_iterate_over_mappings): Delete declaration.
6094 * nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
6095 * procfs.c (proc_iterate_over_mappings): Delete.
6097 2009-06-07 Pedro Alves <pedro@codesourcery.com>
6099 * target.h (struct target_ops): Make to_has_all_memory,
6100 to_has_memory, to_has_stack, to_has_registers and to_has_execution
6101 methods instead of variables.
6102 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
6103 (target_has_registers_1, target_has_execution_1): Declare
6105 (target_has_all_memory): Rewrite to call target_has_all_memory_1.
6106 (target_has_memory): Rewrite to call target_has_memory_1.
6107 (target_has_stack): Rewrite to call target_has_all_stack_1.
6108 (target_has_registers): Rewrite to call target_has_registers_1.
6109 (target_has_execution): Rewrite to call target_has_execution_1.
6110 (default_child_has_all_memory, default_child_has_memory)
6111 (default_child_has_stack, default_child_has_registers)
6112 (default_child_has_execution): Declare.
6113 (target_mark_running, target_mark_exited): Delete declarations.
6114 * target.c (default_child_has_all_memory,
6115 default_child_has_memory, default_child_has_stack,
6116 default_child_has_registers, default_child_has_execution): New.
6117 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
6118 target_has_registers_1, target_has_execution_1): New.
6119 (add_target): Default the to_has_all_memory, to_has_all_memory,
6120 to_has_memory, to_has_stack, to_has_registers and to_has_execution
6121 callbacks to return 0.
6122 (update_current_target): Do not inherit to_has_all_memory,
6123 to_has_memory, to_has_stack, to_has_registers or to_has_execution.
6124 (target_mark_running, target_mark_exited): Delete.
6125 (memory_xfer_partial): Adjust.
6126 (target_read_memory, target_write_memory, target_search_memory):
6127 Dispatch to the the top-most target, not the flattened
6129 (target_info): Adjust.
6130 (init_dummy_target): Install return_zero as callback for
6131 to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
6133 (set_maintenance_target_async_permitted): Use have_live_inferiors
6134 instead of target_has_execution.
6135 * target-memory.c (target_write_memory_blocks): Dispatch memory
6136 writes to the the top-most target, not the flattened
6139 * breakpoint.c (insert_breakpoints): Don't check for
6140 target_has_execution here.
6141 (update_global_location_list): Check if there are live inferiors
6142 to debug instead of target_has_execution.
6143 * infcmd.c (kill_command, detach_command): Check if there are
6144 inferiors instead of target_has_execution.
6145 * inferior.h (have_live_inferiors): Declare.
6146 * inferior.c (have_live_inferiors): New.
6147 * infrun.c (normal_stop): Don't check for target_has_execution to
6148 finish the thread states.
6149 * thread.c (is_thread_state, is_stopped, is_exited, is_running)
6150 (any_running, is_executing): Remove checks for
6151 target_has_execution.
6152 * top.c (kill_or_detach): Don't try to kill core inferiors.
6153 (quit_target): Don't check for target_has_execution.
6155 * corelow.c (core_has_memory, core_has_stack, core_has_registers):
6157 (init_core_ops): Install core_has_memory, core_has_stack and
6159 * exec.c (exec_has_memory): New.
6160 (init_exec_ops): Install exec_has_memory.
6161 * remote.c (remote_add_inferior): Don't call target_mark_running.
6162 (remote_start_remote): Don't call target_mark_exited or call
6163 target_mark_running.
6164 (remote_open_1): Use have_inferiors instead of
6165 target_has_execution. Don't use target_mark_exited.
6166 (init_remote_ops): Install deafult_child_has_all_memory,
6167 default_child_has_memory, default_child_has_stack,
6168 default_child_has_registers, default_child_has_execution.
6169 * bsd-kvm.c (bsd_kvm_return_one): New.
6170 (bsd_kvm_add_target): Register bsd_kvm_return_one as
6171 to_has_memory, to_has_stack and to_has_registers callbacks.
6172 * remote-m32r-sdi.c (m32r_return_one): New.
6173 (init_m32r_ops): Register it.
6174 * inf-child.c (inf_child_target): Adjust to register
6175 default_child_has_all_memory, default_child_has_memory,
6176 default_child_has_stack, default_child_has_registers,
6177 default_child_has_execution callbacks.
6178 * gnu-nat.c (init_gnu_ops): Likewise.
6179 * go32-nat.c (init_go32_ops): Likewise.
6180 * hpux-thread.c (init_hpux_thread_ops): Likewise.
6181 * monitor.c (init_base_monitor_ops): Likewise.
6182 * nto-procfs.c (init_procfs_ops): Likewise.
6183 * remote-mips.c (_initialize_remote_mips): Likewise.
6184 * windows-nat.c (init_windows_ops): Likewise.
6185 * remote-sim.c (gdbsim_create_inferior): Don't use
6186 target_mark_running or target_mark_exited.
6187 (gdbsim_mourn_inferior): Don't call target_mark_exited.
6188 (init_gdbsim_ops): Adjust to register
6189 default_child_has_all_memory, default_child_has_memory,
6190 default_child_has_stack, default_child_has_registers,
6191 default_child_has_execution callbacks.
6193 * linux-nat.c (linux_nat_xfer_partial): If reading memory, and
6194 there's no inferior selected, defer to a lower stratum.
6196 2009-06-05 Tom Tromey <tromey@redhat.com>
6198 * varobj.c (update_dynamic_varobj_children): Wrap error text in
6200 (install_visualizer): Likewise.
6201 (varobj_set_visualizer): Likewise.
6203 2009-06-05 Marc Khouzam <marc.khouzam@ericsson.com>
6205 * mi/mi-main.c (mi_cmd_exec_continue)
6206 (mi_cmd_exec_interrupt): Adjust parsing of thread group
6207 ids to current reality, where they don't have any 'p' prefix.
6209 2009-06-05 Aleksandar Ristovski <aristovski@qnx.com>
6211 * corelow.c (core_open): Check for core_gdbarch before calling
6212 gdbarch_target_signal_from_host.
6214 2009-06-05 Tom Tromey <tromey@redhat.com>
6216 * c-exp.y (parse_number): Don't use K&R definition.
6218 (yyerror): Likewise.
6220 2009-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
6222 * varobj.c (varobj_update): Fix out of scope varobjs to not to change.
6224 2009-06-04 Ulrich Weigand <uweigand@de.ibm.com>
6226 * symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
6227 * ax-gdb.c (gen_var_ref): Likewise.
6228 * findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
6229 * printcmd.c (address_info): Likewise.
6230 * dwarf2loc.c (dwarf_expr_frame_base): Likewise.
6231 * dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
6232 * symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
6233 * dwarf2loc.h: Likewise.
6234 * dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.
6236 * symtab.h: (struct symbol_register_ops): New struct definition.
6237 (struct symbol): Make "ops" member a union of symbol_computed_ops and
6238 symbol_register_ops callback pointers.
6239 (SYMBOL_REGISTER_OPS): New macro.
6240 * tracepoint.c: Include "objfiles.h".
6241 (scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
6242 callback to retrieve register numbers.
6243 * ax-gdb.c (gen_var_ref): Likewise.
6244 * findvar.c (read_var_value): Likewise.
6245 * printcmd.c (address_info): Likewise.
6247 * coffread.c (coff_reg_to_regnum): New function.
6248 (coff_register_funcs): New static variable.
6249 (process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
6250 Install SYMBOL_REGISTER_OPS callbacks.
6251 * mdebugread.c (mdebug_reg_to_regnum): New function.
6252 (mdebug_register_funcs): New static variable.
6253 (parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
6254 Install SYMBOL_REGISTER_OPS callbacks.
6255 * stabsread.c (stab_reg_to_regnum): New function.
6256 (stab_register_funcs): New static variable.
6257 (define_symbol): Do not call gdbarch_stab_reg_to_regnum.
6258 Install SYMBOL_REGISTER_OPS callbacks.
6260 2009-06-03 Doug Evans <dje@google.com>
6262 * symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
6263 after discarding its contents.
6265 2009-06-03 Pedro Alves <pedro@codesourcery.com>
6267 * target.c: Include "exec.h".
6268 (update_current_target): Don't inherit to_sections or
6270 (target_get_section_table): New.
6271 (target_section_by_addr): Fetch the section table from the passed
6273 (memory_xfer_partial): Handle unmapped overlay sections before
6274 anything else. Get the overlay mapped address here. Adjust to
6275 use section_table_xfer_memory_partial.
6276 (get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
6277 instead of TARGET_OBJECT_MEMORY.
6278 (target_resize_to_sections): Delete.
6279 (remove_target_sections): Adjust to remove target sections from
6280 `current_target_sections', and use resize_section_table.
6281 * target.h (struct target_ops) <to_sections, to_sections_end>:
6283 <to_get_section_table>: New method.
6284 (xfer_memory, print_section_info): Delete declarations.
6285 (struct target_section_table): New type.
6286 (target_get_section_table): Declare.
6287 (target_resize_to_sections): Delete declaration.
6288 (remove_target_sections): Delete declaration.
6289 * bfd-target.c (target_bfd_xfer_partial): Get the section table
6291 (target_bfd_get_section_table): New.
6292 (target_bfd_xclose): Adjust.
6293 (target_bfd_reopen): Store the section table in the to_data field.
6294 * corelow.c (core_data): New.
6295 (core_close): Adjust to release core_data and its sections.
6296 (core_open): Allocate core_data, and build its target sections
6298 (deprecated_core_resize_section_table): New.
6299 (core_files_info): Pass core_data to print_section_info.
6300 (core_xfer_partial): Adjust to use
6301 section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
6302 (init_core_ops): Do not install a deprecated_xfer_memory callback
6304 * solib.c (update_solib_list): Add the shared library sections
6305 to the current target sections table.
6306 * exec.c (current_target_sections_1): New global.
6307 (current_target_sections): New global.
6308 (exec_close_1): New function, refactored from exec_close. Remove
6309 the exec_bfd's sections from the current target sections table.
6310 Adjust to not use to_sections.
6311 (exec_close): Remove all target sections. Call exec_close_1.
6312 (exec_file_clear): Use exec_close_1 instead of unpushing the
6314 (exec_file_attach): Likewise. Adjust to not use to_sections. Add
6315 exec_bfd's sections to the current target sections table. Don't
6316 push the exec_ops target here.
6317 (resize_section_table): New.
6318 (add_target_sections): New.
6319 (remove_target_sections): Moved here.
6320 (section_table_xfer_memory): Adjust to implement the xfer_partial
6321 interface, and rename to...
6322 (section_table_xfer_memory_partial): ... this, replacing the
6323 current function of that same name.
6324 (exec_get_section_table): New.
6325 (exec_xfer_partial): New.
6326 (xfer_memory): Delete.
6327 (print_section_info): Replace the target_ops parameter by a
6328 target_section_table parameter.
6329 (exec_files_info, set_section_command, exec_set_section_address):
6330 Adjust to use the current sections table.
6331 (init_exec_ops): Do not register a deprecated_xfer_memory
6332 callback. Register to_xfer_partial and to_get_section_table
6334 * infrun.c (handle_inferior_event): Update comments around
6336 * rs6000-nat.c (xcoff_relocate_core): Adjust to use
6337 deprecated_core_resize_section_table.
6338 * exec.h (resize_section_table): Declare.
6339 (section_table_xfer_memory_partial): Add const char * argument.
6340 (remove_target_sections): Declare here.
6341 (add_target_sections): Declare.
6342 (print_section_info): Declare here.
6343 * gdbcore.h (deprecated_core_resize_section_table): Declare.
6345 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6347 * value.h (struct internalvar): Remove.
6348 (get_internalvar_integer): Add prototype.
6349 (set_internalvar_integer): Add prototype.
6350 (clear_internalvar): Add prototype.
6352 * value.c (struct internalvar): Move here. Add type member. Remove
6353 endian member. Add union_internalvar member instead of value member.
6354 (init_if_undefined_command): Use intvar->type.
6355 (create_internalvar): Do not initialize value/endian, but type.
6356 (create_internalvar_type_lazy): Call create_internalvar.
6357 (value_of_internalvar): Handle host-side internalvar contents.
6358 (set_internalvar_component): Likewise.
6359 (set_internalvar): Likewise.
6360 (get_internalvar_integer): New function.
6361 (clear_internalvar): Likewise.
6362 (set_internalvar_integer): Likewise.
6363 (preserve_values): Handle host-side internalvar contents.
6365 * breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
6366 set_internalvar_integer instead of set_internalvar.
6367 * findcmd.c (find_command): Likewise.
6368 * infrun.c (handle_inferior_event): Likewise.
6369 * source.c (forward_search_command, reverse_search_command): Likewise.
6370 * tracepoint.c (set_traceframe_num, set_tracepoint_num,
6371 set_traceframe_context): Likewise.
6373 * printcmd.c (x_command): Call clear_internalvar instead of
6375 * tracepoint.c (set_traceframe_context): Likewise.
6377 * breakpoint.c (get_number_trailer): Call get_internalvar_integer
6378 instead of value_of_internalvar.
6379 * linespec.c (decode_dollar): Likewise.
6381 * expprint.c (dump_subexp_body_standard): Use internalvar_name
6382 instead of accessing internalvar private elements.
6383 * valops.c (value_assign): Copy from original source instead of
6384 accessing internalvar private elements.
6386 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6388 * scm-lang.c (builtin_type_scm): Remove.
6389 (scm_lookup_name): Add GDBARCH parameter. Use it instead of
6390 objfile architecture. Use per-architecture builtin_scm_type instead
6391 of builtin_type_scm.
6392 (evaluate_exp): Pass expression architecture to scm_lookup_name.
6394 (scm_get_field): Add SIZE parameter. Use it instead of
6395 TYPE_LENGTH (builtin_type_scm).
6397 (build_scm_types): New function.
6398 (scm_type_data): New variable.
6399 (builtin_scm_type): New function.
6400 (_initialize_scheme_language): Do not initialize builtin_type_scm.
6401 Register build_scm_types as post-init function for scm_type_data.
6403 * scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
6404 instead of builtin_type_scm.
6406 * scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
6407 (scm_get_field): Add SIZE paramter.
6408 (scm_scmval_print): Remove prototype.
6409 (builtin_type_scm): Remove.
6410 (struct builtin_scm_type): Add structure definition.
6411 (builtin_scm_type): Add prototype.
6413 * scm-valprint.c (scm_inferior_print): Add TYPE parameter. Use it
6414 instead of builtin_core_addr type; do not use objfile architecture.
6415 (scm_scmlist_print): Add TYPE parameter. Use it to define SCM_SIZE.
6416 Pass type to scm_scmval_print.
6417 (scm_ipruk): Add TYPE parameter. Use it to define SCM_SIZE.
6418 (scm_scmval_print): Make static. Add TYPE parameter. Use it to
6419 define SCM_SIZE. Pass type to scm_ipruk and scm_scmlist_print.
6420 (scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.
6422 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6424 * mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
6425 mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
6426 mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
6427 mdebug_type_unsigned_char, mdebug_type_unsigned_short,
6428 mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
6429 mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
6430 mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
6431 mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
6432 mdebug_type_complex, mdebug_type_double_complex,
6433 mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
6436 (basic_type_data): New global variable.
6437 (basic_type): New function.
6438 (parse_type): Remove static basic type map map_bt. Call basic_type
6439 to get basic types instead of using mdebug_type_ variables.
6441 (parse_symbol): Use builtin types instead of mdebug_type_ variables.
6442 (upgrade_type): Likewise.
6443 (parse_procedure): Likewise.
6444 (psymtab_to_symtab_1): Likewise.
6446 (_initialize_mdebugread): Do not initialize mdebug_type_ variables.
6447 Initialize basic_type_data.
6449 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6451 * dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
6452 * dfp.c (promote_decimal): Remove.
6453 (decimal_binop): Convert LEN_RESULT to input parameter.
6454 Remove call to decimal_binop.
6455 (decimal_compare): Remove call to decimal_binop.
6457 * valarith.c (value_binop): Pass desired result type length
6460 2009-06-01 Tristan Gingold <gingold@adacore.com>
6462 * configure.tgt (avr): Set gdb_sim to use the simulator.
6464 2009-05-29 Doug Evans <dje@google.com>
6466 * infrun.c (prepare_to_proceed): Document. Assert !non_stop.
6467 If scheduler-locking is enabled, we're not going to be singlestepping
6468 any other previously stopped thread.
6470 2009-05-29 Pedro Alves <pedro@codesourcery.com>
6472 * mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.
6474 2009-05-29 Eli Zaretskii <eliz@gnu.org>
6476 * i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
6477 for stabs and COFF debug info.
6479 2009-05-28 Pedro Alves <pedro@codesourcery.com>
6481 * infrun.c (handle_inferior_event): When thread hoping, switch
6482 inferior_ptid to the event thread before removing breakpoints from
6483 the target. If not stopping, also try to revert back to a thread
6484 that was doing a "next". Check if that thread still exists before
6486 (currently_stepping_thread): Delete and merge with ...
6487 (currently_stepping): ... this.
6488 (currently_stepping_callback): Rename to ...
6489 (currently_stepping_or_nexting_callback): ... this, and also
6490 return true if the thread was stepping over a call (has a
6491 step-resume breakpoint).
6493 2009-05-28 Tom Tromey <tromey@redhat.com>
6495 * python/python.c (gdbpy_parameter): Rename. Fix error message.
6496 (GdbMethods): Change "get_parameter" to "parameter".
6498 2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
6499 Paul Pluzhnikov <ppluzhnikov@google.com>
6501 * configure.ac (!have_libpython): Add python-prettyprint source
6503 * configure: Regenerate.
6504 * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
6507 2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
6508 Tom Tromey <tromey@redhat.com>
6509 Thiago Jung Bauermann <bauerman@br.ibm.com>
6511 * mi/mi-main.c (mi_cmd_list_features): List "python" feature.
6512 * varobj.h (varobj_set_visualizer): Declare.
6513 (varobj_get_display_hint): Likewise.
6514 (varobj_update_result_t) <children_changed, value_installed>: New
6516 * mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
6517 * mi/mi-cmds.h (mi_cmd_var_set_visualizer,
6518 mi_cmd_var_set_child_range): Declare.
6519 * mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
6520 (mi_cmd_var_list_children): Emit display hint.
6521 (varobj_update_one): Emit display hint. Handle dynamic children.
6522 * python/python.c (GdbMethods): Add "default_visualizer".
6523 * python/python-internal.h (apply_varobj_pretty_printer,
6524 gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
6526 (gdbpy_default_visualizer): Likewise.
6527 * varobj.c: Include python.h, python-internal.h.
6528 (PyObject): New typedef.
6529 (struct varobj) <children_requested, pretty_printer>: New fields.
6530 (varobj_create): Call install_default_visualizer.
6531 (instantiate_pretty_printer): New function.
6532 (varobj_set_display_format): Update.
6533 (varobj_get_display_hint): New function.
6534 (update_dynamic_varobj_children): New function.
6535 (varobj_get_num_children): Handle dynamic children.
6536 (varobj_list_children): Likewise.
6537 (install_new_value): Likewise.
6538 (varobj_add_child): New function.
6539 (install_visualizer): Likewise.
6540 (install_default_visualizer): Likewise.
6541 (varobj_set_visualizer): Likewise.
6542 (varobj_update): Handle dynamic children.
6543 (create_child): Use create_child_with_value.
6544 (create_child_with_value): New function.
6545 (value_get_print_value): Call pretty printer. Add value_formatter
6547 (c_value_of_variable): Update.
6548 (varobj_invalidate): Always free all_rootvarobj.
6549 * python/python-prettyprint.c (apply_varobj_pretty_printer): New
6551 (gdbpy_get_varobj_pretty_printer): Likewise.
6552 (gdbpy_default_visualizer): Likewise.
6554 2009-05-27 Tom Tromey <tromey@redhat.com>
6555 Thiago Jung Bauermann <bauerman@br.ibm.com>
6556 Phil Muldoon <pmuldoon@redhat.com>
6557 Paul Pluzhnikov <ppluzhnikov@google.com>
6558 Vladimir Prus <vladimir@codesourcery.com>
6560 * python/python-value.c (value_object_to_value): New function.
6561 * python/python-internal.h: Include frameobject.h.
6562 (gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
6564 (value_object_to_value): Declare.
6565 * printcmd.c (struct format_data) <raw>: New field.
6566 (last_format): Default to 0.
6567 (decode_format): Initialize val.raw. Handle /r flag.
6568 (print_command_1): Initialize fmt.raw and opts.raw.
6569 (output_command): Likewise.
6570 (x_command): Fix initialization of fmt.format. Initialize
6572 (display_command): Initialize fmt.raw.
6573 (do_one_display): Set opts.raw.
6574 * python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
6575 gdbpy_display_hint_cst): New globals.
6576 (_initialize_python): Initialize them. Set gdb.pretty_printers.
6577 * cp-valprint.c: Include python.h.
6578 (cp_print_value): Call apply_val_pretty_printer.
6579 * python/python.h (apply_val_pretty_printer): Declare.
6580 * stack.c (print_this_frame_argument_p): Remove.
6581 (print_frame_args): Compute summary flag. Don't use
6582 print_this_frame_argument_p.
6583 * valprint.c: Include python.h.
6584 (user_print_options): Initialize new fields.
6585 (scalar_type_p): New function.
6586 (val_print): Handle 'raw' and 'summary' modes. Call
6587 apply_val_pretty_printer.
6588 (value_print): Handle 'raw' mode.
6589 * valprint.h (struct value_print_options) <raw, summary>: New
6591 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
6592 (SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
6593 (python-prettyprint.o): New target.
6594 * python/python-prettyprint.c: New file.
6596 2009-05-27 Tom Tromey <tromey@redhat.com>
6597 Paul Pluzhnikov <ppluzhnikov@google.com>
6599 * mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
6601 * cli/cli-dump.c (dump_value_to_file): Use value_address.
6602 * valprint.c (common_val_print): Likewise.
6603 * v850-tdep.c (v850_push_dummy_call): Use value_address.
6604 * tracepoint.c (encode_actions): Use value_address.
6605 * printcmd.c (print_formatted): Use value_address.
6606 (x_command): Likewise.
6607 * p-valprint.c (pascal_object_print_static_field): Use
6609 * mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
6610 * mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
6611 * m32r-tdep.c (m32r_push_dummy_call): Use value_address.
6612 * jv-valprint.c (java_value_print): Use value_address.
6613 * infcall.c (find_function_addr): Use value_address.
6614 * gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
6615 * gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
6616 * frv-tdep.c (frv_push_dummy_call): Use value_address.
6617 * frame.c (frame_register_unwind): Use value_address.
6618 (frame_unwind_register_value): Likewise.
6619 * darwin-nat-info.c (info_mach_region_command): Use
6621 * cp-valprint.c (cp_print_static_field): Use value_address.
6622 * c-valprint.c (c_value_print): Use value_address.
6623 * breakpoint.c (update_watchpoint): Use value_address.
6624 (can_use_hardware_watchpoint): Likewise.
6625 * ada-valprint.c (ada_val_print_1): Use value_address.
6626 (ada_value_print): Likewise.
6627 * ada-tasks.c (read_fat_string_value): Use value_address.
6628 * jv-lang.c (java_link_class_type): Use set_value_address.
6629 (java_link_class_type): Likewise.
6630 (get_java_utf8_name): Use value_address.
6631 (type_from_class): Likewise.
6632 (java_link_class_type): Likewise.
6633 * findvar.c (value_of_register): Use set_value_address.
6634 (read_var_value): Likewise.
6635 (read_var_value): Likewise.
6636 * eval.c (evaluate_subexp_standard): Use set_value_address.
6637 (evaluate_subexp_standard): Use value_address.
6638 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
6639 * ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
6640 (ada_value_primitive_packed_val): Likewise.
6641 (ensure_lval): Likewise.
6642 (thin_data_pntr): Use value_address.
6643 (desc_bounds): Likewise.
6644 (ada_value_primitive_packed_val): Likewise.
6645 (value_assign_to_component): Likewise.
6646 (ensure_lval): Likewise.
6647 (make_array_descriptor): Likewise.
6648 (ada_to_fixed_value): Likewise.
6649 (unwrap_value): Likewise.
6650 * value.c (deprecated_value_address_hack): Remove.
6651 (value_address): New function.
6652 (value_raw_address): Likewise.
6653 (set_value_address): Likewise.
6654 (value_fn_field): Use set_value_address.
6655 (value_from_contents_and_address): Likewise.
6656 (value_fn_field): Likewise.
6657 (allocate_value_lazy): Don't use VALUE_ADDRESS.
6658 (value_as_address): Use value_address.
6659 (value_static_field): Likewise.
6660 * valops.c (search_struct_field): Use set_value_address.
6661 (value_at): Likewise.
6662 (value_at_lazy): Likewise.
6663 (value_repeat): Likewise.
6664 (value_cast_structs): Use value_address.
6665 (value_cast): Likewise.
6666 (value_fetch_lazy): Likewise.
6667 (value_assign): Likewise.
6668 (value_repeat): Likewise.
6669 (address_of_variable): Likewise.
6670 (value_coerce_array): Likewise.
6671 (value_coerce_function): Likewise.
6672 (value_addr): Likewise.
6673 (search_struct_field): Likewise.
6674 (search_struct_method): Likewise.
6675 (find_method_list): Likewise.
6676 (value_struct_elt_for_reference): Likewise.
6677 (value_full_object): Likewise.
6678 * jv-valprint.c (java_value_print): Use set_value_address.
6679 * value.h (deprecated_value_address_hack): Remove.
6680 (VALUE_ADDRESS): Remove.
6681 (value_address): Declare.
6682 (value_raw_address): Declare.
6683 (set_value_address): Declare.
6685 2009-05-27 Tom Tromey <tromey@redhat.com>
6686 Thiago Jung Bauermann <bauerman@br.ibm.com>
6687 Phil Muldoon <pmuldoon@redhat.com>
6688 Paul Pluzhnikov <ppluzhnikov@google.com>
6690 * python/python.c (_initialize_python): Call
6691 gdbpy_initialize_types.
6692 (GdbMethods): Add "lookup_type".
6693 * python/python-value.c (value_object) <type>: New field.
6694 (valpy_dealloc): Decref type.
6695 (valpy_new): Initialize type.
6696 (valpy_get_type): New function.
6697 (value_to_value_object): Initialize type.
6698 (valpy_cast): New function.
6699 (value_object_getset): Add "type".
6700 (value_object_methods): Add "cast".
6701 * python/python-internal.h (type_to_type_object): Declare.
6702 (type_object_to_type): Likewise.
6703 (gdbpy_initialize_types): Likewise.
6704 (gdbpy_lookup_type): Declare.
6705 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
6706 (SUBDIR_PYTHON_SRCS): Add python-type.c.
6707 (python-type.o): New target.
6708 * python/python-type.c: New file.
6710 2009-05-27 Tom Tromey <tromey@redhat.com>
6711 Thiago Jung Bauermann <bauerman@br.ibm.com>
6712 Phil Muldoon <pmuldoon@redhat.com>
6714 * python/python.c: Include objfiles.h, observer.h.
6715 (gdbpy_auto_load): New global.
6716 (gdbpy_current_objfile): Likewise.
6717 (GDBPY_AUTO_FILENAME): New define.
6718 (gdbpy_new_objfile): New function.
6719 (gdbpy_get_current_objfile): Likewise.
6720 (gdbpy_objfiles): Likewise.
6721 (_initialize_python): Add "maint set auto-load". Call
6722 gdbpy_initialize_objfile. Attach objfile observer.
6723 (GdbMethods): New methods current_objfile, objfiles.
6724 * python/python-objfile.c: New file.
6725 * python/python-internal.h (objfile_to_objfile_object): Declare.
6726 (objfpy_get_printers): Likewise.
6727 (gdbpy_initialize_objfile): Likewise.
6728 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
6729 (SUBDIR_PYTHON_SRCS): Add python-objfile.c.
6730 (python-objfile.o): New target.
6732 2009-05-27 Pedro Alves <pedro@codesourcery.com>
6734 * infrun.c (follow_exec): Clear the stop_requested flag.
6735 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
6738 2009-05-27 Aleksandar Ristovski <aristovski@qnx.com>
6740 * nto-procfs.c (get_regset): Pass correct pointer.
6742 2009-05-26 Doug Evans <dje@google.com>
6744 * dwarf2read.c (follow_die_ref): Add comment.
6745 (dwarf2_mark_helper): Tweak comment.
6746 (dwarf2_mark): Move description to its proper place.
6748 2009-05-25 Pierre Muller <muller@ics.u-strasbg.fr>
6750 * procfs.c (procfs_wait): Add options parameter.
6752 2009-05-24 Doug Evans <dje@google.com>
6754 Global renaming of find_thread_pid to find_thread_ptid.
6755 * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
6756 * thread.c (find_thread_ptid): Renamed from find_thread_pid.
6757 All callers updated.
6759 * infrun.c (follow_fork): Initialize new step_* locals
6760 to avoid "may be used uninitialized" warnings.
6762 2009-05-24 Pedro Alves <pedro@codesourcery.com>
6764 * inflow.c (copy_terminal_info): Deep copy `run_terminal'.
6766 2009-05-24 Pedro Alves <pedro@codesourcery.com>
6768 * gdbthread.h (struct thread_info): New `pending_follow' field.
6769 * thread.c (new_thread): New function.
6770 (add_thread_silent): Use it.
6771 * breakpoint.c (internal_breakpoint_number): New global, moved
6773 (create_internal_breakpoint): ... this.
6774 (clone_momentary_breakpoint): New.
6775 * breakpoint.h (clone_momentary_breakpoint): Declare.
6776 * infrun.c (nullify_last_target_wait_ptid): Move declaration
6778 (pending_follow): Delete.
6779 (follow_fork): Handle pending follow fork event here. Moved the
6780 preserving of thread stepping state here.
6781 (resume): Don't handle pending follow fork events here. Only
6782 install the inferior's terminal modes if we're about to resume it.
6783 (proceed): Handle possible pending follow fork events here.
6784 (init_wait_for_inferior): No need to clear pending_follow anymore,
6786 (handle_inferior_event): Adjust to per-thread `pending_follow'.
6787 Call `follow_fork' to handle following the fork. If the
6788 follow-fork is cancelled, stop stepping.
6789 * linux-nat.c (linux_child_follow_fork): Adjust to per-thread
6790 `pending_follow' events. Remove code that handled preserving the
6791 thread stepping state.
6792 * inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
6793 * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
6795 2009-05-24 Pierre Muller <muller@ics.u-strasbg.fr>
6797 * symfile.c (add_shared_symbol_files_command): Remove
6798 prototype and function.
6799 (_initialize _symfile): Move "add-shared-symbol-files"
6800 command and "assf" alias.
6801 * windows-nat.c (_initialize_windows_nat): to here.
6802 Change "add-shared-symbol-files" to alias.
6804 * config/i386/cygwin.mh: Remove NAT_FILE.
6805 * config/i386/mingw.mh: Remove NAT_FILE.
6806 * config/i386/mingw64.mh: Remove NAT_FILE.
6807 * config/i386/nm-cygwin.h: Remove file.
6808 * config/i386/nm-cygwin64.h: Remove file.
6810 2009-05-24 Hui Zhu <teawater@gmail.com>
6812 * i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
6813 I386_LINUX_RECORD_IOCTL_*,
6814 I386_LINUX_RECORD_FCNTL_*) Removed.
6815 (i386_linux_init_abi): Change size of record from macros to
6818 2009-05-24 Hui Zhu <teawater@gmail.com>
6820 * i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
6821 * linux-record.c (record_linux_system_call): Ditto.
6822 * linux-record.h (linux_record_tdep): Ditto.
6824 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
6826 Replace the savestring calls by xstrdup calls where possible.
6827 * breakpoint.c (condition_command, set_raw_breakpoint)
6828 (create_catchpoint, update_breakpoint_locations): Replace the
6829 savestring calls by xstrdup calls where possible.
6830 * buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
6831 (record_producer): Likewise.
6832 * coffread.c (coff_start_symtab, complete_symtab): Likewise.
6833 * corefile.c (set_gnutarget): Likewise.
6834 * dbxread.c (add_new_header_file): Likewise.
6835 * demangle.c (set_demangling_command, set_demangling_style): Likewise.
6836 * event-top.c (push_prompt, pop_prompt, command_line_handler)
6837 (set_async_prompt): Likewise.
6838 * infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
6840 * language.c (set_language_command, _initialize_language): Likewise.
6841 * linespec.c (decode_line_2): Likewise.
6842 * rs6000-nat.c (add_vmap): Likewise.
6843 * top.c (set_prompt, init_history, init_main): Likewise.
6844 * tracepoint.c (stringify_collection_list): Likewise.
6845 * varobj.c (varobj_create): Remove variable expr_len. Replace the
6846 savestring calls by xstrdup calls where possible.
6847 (value_of_root, c_name_of_variable, c_describe_child): Replace the
6848 savestring calls by xstrdup calls where possible.
6849 * xcoffread.c (complete_symtab): Likewise.
6850 * cli/cli-script.c (build_command_line, define_command): Likewise.
6851 * cli/cli-setshow.c (do_setshow_command): Likewise.
6853 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
6855 Remove already unreachable code.
6856 * varobj.c (varobj_get_handle): Fix comment when error is called.
6857 All callers updated.
6859 2009-05-23 Eli Zaretskii <eliz@gnu.org>
6861 * README (`configure' options): Document GDB-specific options to
6864 * symtab.c (skip_prologue_using_lineinfo): New function.
6865 (find_function_start_sal): Use it to get to the first line of
6866 function's body that has an entry in the lineinfo table.
6868 * symmisc.c (dump_symtab): Switch the current language to
6869 the language of the symtab we are dumping only if the symtab's
6870 language is neither language_auto nor language_unknown.
6872 * coffread.c (coff_symtab_read): Set language_minimal as the
6873 language for the "_globals_" pseudo-file.
6874 (process_coff_symbol): Set the symbol's language to the language
6877 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6879 * target.h (struct section_table): Rename to ...
6880 (struct target_section): ... this.
6881 * exec.c: Adjust all references.
6882 * exec.h: Adjust all references.
6883 * nto-tdep.c: Adjust all references.
6884 * nto-tdep.h: Adjust all references.
6885 * ppc-linux-tdep.c: Adjust all references.
6886 * rs6000-nat.c: Adjust all references.
6887 * s390-tdep.c: Adjust all references.
6888 * solib-darwin.c: Adjust all references.
6889 * solib-frv.c: Adjust all references.
6890 * solib-irix.c: Adjust all references.
6891 * solib-null.c: Adjust all references.
6892 * solib-osf.c: Adjust all references.
6893 * solib-pa64.c: Adjust all references.
6894 * solib-som.c: Adjust all references.
6895 * solib-sunos.c: Adjust all references.
6896 * solib-svr4.c: Adjust all references.
6897 * solib-target.c: Adjust all references.
6898 * solib.c: Adjust all references.
6899 * solist.h: Adjust all references.
6900 * symfile.c: Adjust all references.
6901 * symfile.h: Adjust all references.
6902 * target.c: Adjust all references.
6904 2009-05-22 Hui Zhu <teawater@gmail.com>
6906 Add sys_fcntl argument interfaces to linux_record_tdep.
6908 * linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
6909 fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
6911 * i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
6912 I386_LINUX_RECORD_FCNTL_F_GETLK64,
6913 I386_LINUX_RECORD_FCNTL_F_SETLK64,
6914 I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
6915 of I386 Linux sys_fcntl arguments.
6916 (i386_linux_init_abi): Set macros values to linux_record_tdep.
6917 * linux-record.c (record_linux_system_call): Change to use
6918 the interface in linux_record_tdep in sys_fcntl and
6921 * linux-record.c (record_linux_system_call): Fix the process
6922 record build error about type in CYGWIN.
6924 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6926 * inflow.c (kill_command): Delete left over static declaration.
6928 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6930 * bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
6932 (struct section_closure): Delete.
6933 (add_to_section_table): Delete.
6934 (build_target_sections_from_bfd): Delete.
6935 (target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
6936 (target_bfd_reopen): Use build_section_table.
6937 * exec.c (xfer_memory): Move most code except for overlay
6938 debugging support from here...
6939 (section_table_xfer_memory): ... to this new function.
6940 (section_table_xfer_memory_partial): New.
6941 * exec.h (section_table_xfer_memory_partial): Declare.
6942 * bfd-target.h (build_target_sections_from_bfd): Delete
6945 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6947 * remote.c (compare_sections_command): Don't declare exec_bfd.
6948 * tracepoint.c: Include "gdbcore.h".
6949 (remote_set_transparent_ranges): Don't declare exec_bfd.
6951 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6953 * aix-thread.c (init_aix_thread_ops): Whitespace.
6955 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6957 * dec-thread.c (dec_thread_wait): Add options parameter. Use it
6958 to call the to_wait method in the target beneath.
6959 * remote-m32r-sdi.c (m32r_wait): Add options parameter.
6961 2009-05-21 Joel Brobecker <brobecker@adacore.com>
6963 * aix-thread.c (aix_thread_wait): Add options parameter. Use it
6964 to call the to_wait method in the target_beneath.
6966 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6968 * linux-nat.c (linux_nat_terminal_inferior)
6969 (linux_nat_terminal_ours): Don't check sync_execution.
6970 * remote.c (remote_terminal_inferior, remote_terminal_ours):
6971 Don't check sync_execution. Update comments.
6972 * target.c (target_terminal_inferior): New.
6973 * target.h (target_terminal_inferior): Delete macro, and declare
6975 * event-top.c (async_disable_stdin): Make idempotent. Don't give
6976 the target the terminal here.
6977 * inflow.c (terminal_ours_1): Don't return early without setting
6980 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6982 * target.h (TARGET_WNOHANG): New.
6983 * target.c (target_wait): Add `options' argument. Adjust.
6984 (struct target_ops) <to_wait>: Add `options' argument.
6985 (target_wait): Add `options' argument.
6986 * infrun.c (wait_for_inferior): Pass 0 as options to
6987 target_wait (blocking wait).
6988 (fetch_inferior_event): Pass TARGET_WNOHANG as options to
6990 * fork-child.c (startup_inferior): Pass 0 as options to
6991 target_wait (blocking wait).
6992 * linux-nat.c (linux_nat_create_inferior): Remove async masking.
6993 (linux_nat_wait_1): Add `target_options' argument. Use it instead
6994 of checking on target_can_async_p.
6995 (linux_nat_wait): Add `target_options' argument. Adjust.
6996 * remote.c (remote_wait_ns): Add `options' argument. Adjust to
6997 check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
6998 (remote_wait_as): Add `options' argument. Adjust to check on
6999 TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
7000 a blocking wait, keep waiting until an interesting event comes
7002 (remote_wait): Add `options' argument. Don't loop here if the
7003 target is in async mode, and a blocking wait has been requested.
7005 * top.c (deprecated_target_wait_hook): Add `options' argument.
7006 * linux-thread-db.c (thread_db_wait): Add `options' argument, and
7007 pass it down to the layer beneath.
7008 * inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
7009 * record.c (record_beneath_to_wait): Add `options' argument.
7010 (record_wait): Add `options' argument, and pass it down to the
7012 * bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
7013 * darwin-nat.c (darwin_wait): Likewise.
7014 * defs.h (deprecated_target_wait_hook): Likewise.
7015 * gnu-nat.c (gnu_wait): Add `options' argument.
7016 * go32-nat.c (go32_wait): Likewise.
7017 * hpux-thread.c (hpux_thread_wait): Add `options' argument, and
7018 pass it down to the layer beneath.
7019 * inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
7020 * monitor.c (monitor_wait): Likewise.
7021 * nto-procfs.c (procfs_wait): Likewise.
7022 * remote-mips.c (mips_wait): Add `options' argument.
7023 * remote-sim.c (gdbsim_wait): Likewise.
7024 * rs6000-nat.c (rs6000_wait): Add `options' argument.
7025 * sol-thread.c (sol_thread_wait): Add `options' argument, and pass
7026 it down to the layer beneath.
7027 * spu-linux-nat.c (spu_child_wait): Add `options' argument.
7028 * windows-nat.c (windows_wait): Likewise.
7029 * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
7031 2009-05-21 Pedro Alves <pedro@codesourcery.com>
7033 * mi/mi-interp.c (mi_on_resume): Account for whole process
7036 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
7038 * m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.
7040 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
7042 * dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.
7044 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
7046 Fix parsing DW_AT_const_value using DW_FORM_string.
7047 * dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.
7049 2009-05-20 Joel Brobecker <brobecker@adacore.com>
7051 * aix-thread.c (giter_count): Do not count the main thread.
7052 (giter_accum): Do not include the main thread.
7054 2009-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
7056 Remove the PROT parameter from openp.
7057 * source.c (openp): Remove the parameter PROT. Assertion check MODE.
7058 defs.h (openp): Update the prototype.
7059 Update all the openp callers.
7061 2009-05-19 Pedro Alves <pedro@codesourcery.com>
7063 * inflow.c (kill_command): Moved to infcmd.c.
7064 (_initialize_inflow): Don't add the "kill" command or clear
7066 * infcmd.c (kill_command): Moved here from inflow.c.
7067 (_initialize_infcmd): Add the "kill" command here.
7069 2009-05-19 Pedro Alves <pedro@codesourcery.com>
7071 * fork-child.c: Don't include frame.h. Include terminal.h.
7072 (fork_inferior): Call new_tty_postfork after forking adn adding
7073 the child to the inferior list.
7074 * inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
7076 * inflow.c (struct terminal_info): Remove const qualifier from
7077 `run_terminal' field.
7078 (inferior_thisrun_terminal): Tweak comment.
7079 (inflow_inferior_exit): Release the `run_terminal' field.
7080 (copy_terminal_info): New function.
7081 (new_tty_postfork): New function.
7082 * terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
7083 (copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
7084 * inf-ptrace.c: Include terminal.h.
7085 (inf_ptrace_follow_fork): Copy the parent's terminal info to the
7087 * linux-nat.c: Include terminal.h.
7088 (linux_child_follow_fork): Copy the parent's terminal info to the
7090 * inf-ttrace.c: Include terminal.h.
7091 (inf_ttrace_follow_fork): Copy the parent's terminal info to the
7094 2009-05-19 Pedro Alves <pedro@codesourcery.com>
7096 * breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
7097 (update_global_location_list): Use gdbarch_has_global_breakpoints
7098 instead of gdbarch_has_global_solist and
7099 target_supports_multi_process.
7100 * dicos-tdep.c (dicos_init_abi): Set
7101 gdbarch_has_global_breakpoints.
7102 * gdbarch.sh (has_global_solist): Update comment.
7103 (has_global_breakpoints): New.
7104 * remote.c (remote_start_remote): Use
7105 gdbarch_has_global_breakpoints instead of
7106 gdbarch_has_global_solist.
7107 * target.c (target_detach): Use gdbarch_has_global_breakpoints
7108 instead of gdbarch_has_global_solist.
7109 * infcmd.c (attach_command): Use gdbarch_has_global_solist instead
7110 of target_supports_multi_process.
7112 2009-05-18 Paul Pluzhnikov <ppluzhnikov@google.com>
7114 * objc-lang.c (find_methods): Plug a small memory leak.
7116 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7118 * solib-svr4.c: Include observer.h.
7119 (debug_base, debug_loader_offset_p, debug_loader_offset)
7120 (debug_loader_name, main_lm_addr): Move these globals...
7121 (struct svr4_info): ... into this new structure.
7122 (svr4_info_p): New typedef.
7123 (svr4_info): New global.
7124 (get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
7126 (locate_base, solib_svr4_r_map, solib_svr4_r_brk)
7127 (solib_svr4_r_ldsomap): Add svr4_info argument. Adjust to
7129 (open_symbol_file_object): Adjust to per-inferior svr4.
7130 (svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
7132 (enable_break): Add svr4_info argument. Adjust to per-inferior
7134 (enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
7135 Adjust to per-inferior svr4.
7136 (_initialize_svr4_solib): Install the solib_svr4_inferior_exit
7139 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7141 * linux-nat.h (linux_proc_get_tgid): Declare.
7142 * linux-nat.c (linux_proc_get_tgid): New.
7143 * linux-thread-db.c (struct thread_db_info): New field
7144 `need_stale_parent_threads_check'.
7145 (add_thread_db_info): Set it.
7146 (find_new_threads_callback): Ignore stale fork parent threads.
7147 (thread_db_resume): New.
7148 (init_thread_db_ops): Install thread_db_resume.
7150 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7152 * fork-child.c (fork_inferior): Only reset the thread list if this
7153 is the first inferior.
7154 (startup_inferior): If the target support multi-process, tell it
7155 to resume only the new process.
7156 * linux-nat.c (num_lwps): Delete global.
7157 (purge_lwp_list): New function.
7158 (num_lwps): New function.
7159 (add_lwp, delete_lwp): Adjust.
7161 (iterate_over_lwps): Add filter argument. Handle it.
7162 (linux_nat_attach): Remove FIXME note.
7163 (linux_nat_detach): Adjust to iterate over threads of the inferior
7164 we're detaching from. Adjust to num_lwps being a function. Don't
7165 assume the head of the lwp list is the main thread of the process
7166 we're detaching from. Don't destroy the LWP list.
7167 (resume_callback): Add debug output.
7168 (linux_nat_resume): Handle resuming a single inferior. Allow a
7169 wildcard resume in non-stop mode.
7170 (linux_handle_extended_wait): Don't assume inferior_ptid is the
7171 correct inferior of the parent LWP.
7172 (status_callback): Also check lp->waitstatus.
7173 (select_event_lwp): Add new filter parameter. Handle it.
7174 (linux_nat_filter_event): Adjust to num_lwps being a function.
7175 (linux_nat_wait_1): When adding the first lwp of the inferior, use
7176 an is_lwp check instead of checking for the number of lwps.
7177 (linux_nat_wait_1): Handle waiting for a specific tgid. Handle
7178 pending process exit statuses.
7179 (linux_nat_mourn_inferior): Don't destroy all the LWP info.
7180 Instead delete LWPs of the inferior that we're mourning. Don't
7181 unregister from the event loop here.
7182 (linux_nat_pid_to_str): Use `num_lwps'.
7183 (linux_nat_make_corefile_notes): Adjust to walk over lwps of a
7185 (linux_nat_is_async_p): Check if async was masked out.
7186 (linux_multi_process): New global.
7187 (linux_nat_supports_multi_process): New.
7188 (linux_nat_stop_lwp): Remove LWP filtering. It is done by the
7190 (linux_nat_stop): Adjust to make iterate_over_lwps itself do the
7192 (linux_nat_close): New.
7193 (linux_nat_add_target): Register linux_nat_close and
7194 linux_nat_supports_multi_process.
7195 * linux-nat.h (iterate_over_lwps): Add filter argument.
7196 * linux-thread-db.c (thread_db_handle): Delete.
7197 (proc_handle, thread_agent, td_init_p, td_ta_new_p)
7198 (td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
7199 (td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
7200 (td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
7201 (td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
7202 longer globals, moved to...
7203 (struct thread_db_info): ... this new structure.
7204 (thread_db_list): New.
7205 (add_thread_db_info, get_thread_db_info, delete_thread_db_info):
7207 (have_threads_callback): Filter out threads of all inferiors but
7208 the one specified by the ARGS argument.
7209 (have_threads): Add ptid argument specifying the inferior we're
7210 interested in. Handle it.
7211 (struct thread_get_info_inout): New.
7212 (thread_get_info_callback, thread_from_lwp): Adjust to use it.
7213 (thread_db_attach_lwp): Check that inferior of the passed in
7214 thread is using thread-db. Adjust.
7215 (enable_thread_event): Remove thread_agent parameter. Instead,
7216 get it from the per-inferior thread-db info.
7217 (dladdr_to_soname): Move higher up.
7218 (enable_thread_event_reporting): Adjust to use per-inferior
7220 (try_thread_db_load_1): Replace `handle' parameter by a
7221 thread_db_info parameter. Adjust to use per-inferior thread-db
7223 (try_thread_db_load): Adjust to use per-inferior thread-db info.
7224 (thread_db_load, disable_thread_event_reporting): Ditto.
7225 (check_for_thread_db): Remove conditional reporting of which
7226 libthread_db is in use.
7227 (thread_db_new_objfile): Add comment about inferior_ptid.
7228 (attach_thread): Adjust to use per-inferior thread-db info.
7229 (thread_db_detach): Adjust to use per-inferior thread-db info.
7230 Remove thread event breakpoints of the current inferior. Only
7231 unpush the thread-db target if there are no more processes using
7233 (check_event): Adjust to use per-inferior thread-db info.
7234 (thread_db_wait): Adjust to use per-inferior thread-db info. Only
7235 unpush the thread-db target if there are no more processes using
7237 (thread_db_mourn_inferior): Adjust to use per-inferior thread-db
7238 info. Mark breakpoints of the current inferior out before
7239 deleting them. Only unpush the thread-db target if there are no
7240 more processes using it.
7241 (find_new_threads_callback): Adjust to use per-inferior thread_db
7243 (thread_db_find_new_threads_1): Add new ptid argument. Adjust to
7244 use per-inferior thread-db info.
7245 (thread_db_find_new_threads): Adjust to use per-inferior thread-db
7247 (thread_db_get_thread_local_address): Adjust.
7248 (thread_db_get_ada_task_ptid): Adjust.
7249 * inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
7250 if there no more processes left to debug.
7251 * thread.c (set_running, set_executing): Handle resuming all
7252 threads of a single inferior.
7253 * mi/mi-interp.c (mi_output_running_pid): New.
7254 (mi_inferior_count): New.
7255 (mi_on_resume): For backwards compatibility, if resuming all
7256 threads of an inferior, and there is only one inferior, output
7259 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7261 * ada-lang.c (ada_find_any_type): Move check for primitive types ...
7262 (to_fixed_range_type): ... to here.
7264 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7266 * ada-lang.c (desc_data_type): Remove, replace by ...
7267 (desc_data_target_type): ... this.
7268 (thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
7269 (ada_is_array_descriptor_type): Likewise.
7270 (ada_type_of_array): Likewise.
7271 (ada_coerce_to_simple_array_type): Likewise.
7272 (ada_array_element_type): Likewise.
7274 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7276 * ada-valprint.c (ada_val_print_1): Use val_print_string to print
7277 result of ada_vax_float_print_function inferior call.
7279 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7281 * ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
7282 avoid creating a dummy value.
7284 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7286 * p-valprint.c (pascal_val_print): Use extract_typed_address
7287 to extract reference value.
7289 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7291 * doublest.c (NAN): Remove unused define.
7292 (extract_floating_by_length, deprecated_extract_floating): Remove.
7293 (store_floating_by_length, deprecated_store_floating): Remove.
7294 (extract_typed_floating): Do not call extract_floating_by_length.
7295 (store_typed_floating): Do not call store_floating_by_length.
7296 (convert_typed_floating): Remove redundant assertions.
7297 * doublest.h (deprecated_extract_floating): Remove.
7298 (deprecated_store_floating): Remove.
7299 * sh64-tdep.c (sh64_register_convert_to_raw): Call
7300 extract_typed_floating instead of deprecated_extract_floating.
7302 2009-05-18 Jon Beniston <jon@beniston.com>
7304 * MAINTAINERS: Add lm32 target.
7305 * Makefile.in: Add lm32 dependencies.
7306 * NEWS: Indicate lm32 is a new target.
7307 * configure.tgt: Add lm32 targets.
7308 * lm32-tdep.c: New file.
7310 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7312 * corelow.c (core_open): Flush the register cache before doing
7313 anything with registers.
7315 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7317 * inflow.h (our_process_group): Remove declaration.
7318 (inferior_process_group): Delete global variable declaration.
7319 (inferior_process_group): New function declaration.
7320 * inflow.c: Include observer.h.
7321 (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
7323 (struct terminal_info): New struct.
7324 (our_terminal_info): New global.
7325 (inferior_process_group): New function.
7326 (inferior_thisrun_terminal): Extend description comment.
7327 (gdb_has_a_terminal): Adjust to write to our_terminal_info fields
7329 (terminal_init_inferior_with_pgrp): Adjust to per-inferior
7331 (terminal_inferior): Ditto.
7332 (terminal_ours_1): Ditto.
7333 (inflow_new_inferior, inflow_inferior_exit): New functions.
7334 (child_terminal_info): Adjust to per-inferior terminal settings.
7335 (osig_set): New global.
7336 (set_sigint_trap): Adjust to per-inferior terminal settings. Set
7337 or clear `osig_set' accordingly.
7338 (clear_sigint_trap): Check `osig_set' to decide wheater to restore
7339 SIGINT handler, instead of checking the current inferior (which
7341 (_initialize_inflow): Attach inflow_new_inferior and
7342 inflow_inferior_exit to the "new_inferior" and "inferior_exit"
7343 notifications, respectively.
7344 * inferior.h (struct terminal_info): Forward declare.
7345 (struct inferior): Add `terminal_info' field.
7346 * inferior.c (delete_inferior_1): Notify the inferior_exit
7347 observers before removing the inferior from the lists and deleting
7349 * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
7350 a function instead of a variable. Adjust.
7351 * procfs.c (procfs_stop): Ditto.
7353 2009-05-17 Pedro Alves <pedro@codesourcery.com>
7355 * infrun.c (handle_inferior_event): When handling a
7356 TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
7358 * linux-nat.c (linux_child_follow_fork): Only detach breakpoints
7359 from the child if vforking.
7360 * inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
7361 breakpoints from the child here.
7363 2009-05-17 Pedro Alves <pedro@codesourcery.com>
7365 * infrun.c (pending_follow): Remove execd_pathname member.
7366 (resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
7367 (handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
7368 event, don't copy `execd_pathname' to pending_follow, use the
7369 event copy instead. Release `execd_pathname' once done with
7372 * infrun.c (pending_follow): Remove mention of exec events.
7374 2009-05-17 Hui Zhu <teawater@gmail.com>
7376 * i386-tdep.c (i386_process_record): Make it extern.
7377 (i386_gdbarch_init): Don't call set_gdbarch_process_record
7379 * i386-tdep.h (i386_process_record): Declare.
7380 * i386-linux-tdep.c (i386_linux_init_abi): Call
7381 set_gdbarch_process_record.
7383 2009-05-17 Vladimir Prus <vladimir@codesourcery.com>
7385 Always report varobj as changed when in_scope attribute changes.
7387 * varobj.c (install_new_value): If non-NULL-ness of value
7390 2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
7392 * NEWS: Mention set/show libthread-db-search-path.
7393 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
7394 (LIBTHREAD_DB_SO): Moved from linux-thread-db.c
7395 * linux-thread-db.c (libthread_db_search_path): New setting.
7396 (thread_db_handle): New variable (replaces using_thread_db).
7397 (try_thread_db_load_1): New function.
7398 (try_thread_db_load, thread_db_load_search): Likewise.
7399 (dladdr_to_soname): Likewise.
7400 (thread_db_load): Iterate over possibly multiple libthread_db's.
7401 (check_for_thread_db): Attempt to load new libthread_db.
7402 (thread_db_detach, thread_db_wait): Unload libthread_db.
7403 (thread_db_mourn_inferior): Likewise.
7404 (_initialize_thread_db): Add new libthread-db-search-path option.
7405 Defer loading of libthread_db to check_for_thread_db.
7406 * solib.c (libpthread_name_p): New function.
7407 (libpthread_solib_p): Call it.
7408 * solib.h (libpthread_name_p): New prototype.
7410 2009-05-15 Pierre Muller <muller@ics.u-strasbg.fr>
7412 * MAINTAINERS: Update my email address.
7414 2009-05-14 Paul Pluzhnikov <ppluzhnikov@google.com>
7416 * breakpoint.h: Add breakpoint_re_set_objfile prototype.
7417 * breakpoint.c (create_overlay_event_breakpoint): Renamed
7418 from create_overlay_event_breakpoint_1, old
7419 create_overlay_event_breakpoint deleted.
7420 (breakpoint_re_set_objfile): Don't rescan all objfiles
7422 (breakpoint_re_set): New function.
7423 * symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
7424 instead of breakpoint_re_set.
7425 * objfiles.c (objfile_relocate): Likewise.
7427 2009-05-14 Joel Brobecker <brobecker@adacore.com>
7429 * gdbarch.sh: Add comment documenting the target_gdbarch global.
7430 gdbarch.h does NOT need to be regenerated as the corresponding
7431 change has already been made in a previous commit.
7433 2009-05-14 Pierre Muller <muller@ics.u-strasbg.fr>
7435 Remove all i386 debug register low level macros in config nm files.
7436 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
7437 (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
7438 (I386_USE_GENERIC_WATCHPOIINTS): Remove.
7440 * i386-nat.h: New file (adapted from config/i386/nm-i386.h).
7441 (struct i386_dr_low_type): New type.
7442 (i386_dr_low): New global variable.
7443 * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
7444 (i386_insert_aligned_watchpoint): Replace i386 dr low macros by
7445 i386_dr_low struct variable fields.
7446 (i386_remove_aligned_watchpoint): Likewise.
7447 (i386_stopped_data_address): Likewise.
7448 (i386_stopped_by_hwbp): Likewise.
7449 (show_debug_regs_command_added): New static variable.
7450 (add_show_debug_regs_command): New static function.
7451 (i386_use_watchpoints): Call add_show_debug_regs_command if not done.
7452 (i386_set_debug_register_length): New function.
7453 (_initialize_i386_nat): Delete.
7455 * amd64-linux-nat.c: Include "i386-nat.h".
7456 (amd64_linux_dr_set_control): Change to static.
7457 (amd64_linux_dr_get_status): Change to static.
7458 (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
7459 (_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
7461 * go32-nat.c: Include "i386-nat.h".
7462 (go32_set_addr): Change to static.
7463 (go32_set_dr7): Change to static. Change arg type to unisgned long.
7464 (go32_get_dr6): Change to static. Change return type to unisnged long.
7465 (init_go32_ops): Set i386_dr_low variable fields.
7466 * i386-linux-nat.c: Include "i386-nat.h".
7467 (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
7468 (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
7469 (_initialize_i386_linux_nat): Set i386_dr_low variable fields.
7470 * i386bsd-nat.h: Declare functions used for
7471 i386_dr_low fields in i386fbsd-nat.c.
7472 * i386fbsd-nat.c: Include "i386-nat.h".
7473 (_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
7474 * windows-nat.c: Include "i386-nat.h".
7475 (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
7477 (cygwin_get_dr6): Change return type to unisnged long.
7478 (cygwin_set_dr7): Change arg type to unisgned long.
7479 (init_windows_ops): Set i386_dr_low function fields.
7481 * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call
7482 i386_set_debug_register_length.
7483 * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.
7485 * config/i386/nm-cygwin.h: Remove all I386_* macros.
7486 * config/i386/nm-cygwin64.h: Likewise.
7487 * config/i386/nm-fbsd.h: Likewise.
7488 * config/i386/nm-linux.h: Likewise.
7489 * config/i386/nm-i386.h: Remove completely.
7490 * config/i386/nm-go32.h: Remove completely.
7491 * config/i386/nm-linux64.h: Remove completely.
7492 * config/i386/go32.mh (NAT_FILE): Remove entry.
7493 * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
7495 2009-05-14 Jon Beniston <jon@beniston.com>
7497 * MAINTAINERS: Add Jon Beniston to write after approval list.
7499 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
7501 * objc-lang.c (objc_objfile_data): New variable.
7502 (find_methods): Skip objfiles without Obj-C methods.
7503 (_initialize_objc_lang): New function.
7505 2009-05-13 Joel Brobecker <brobecker@adacore.com>
7507 * c-lang.c (print_wchar): Remove unnecessary cast.
7509 2009-05-12 Jim Blandy <jimb@red-bean.com>
7511 * MAINTAINERS: Remove self as m32c target maintainer.
7513 2009-05-12 Pedro Alves <pedro@codesourcery.com>
7515 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
7516 * command.h (deprecated_add_set_cmd): Delete declaration.
7517 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
7518 'set debug gnu-nat' and 'show debug gnu-nat'.
7519 * i386-nat.c (_initialize_i386_nat): Replace 'maint
7520 show-debug-registers' with 'maint set show-debug-registers' and
7521 'maint show show-debug-registers'.
7522 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
7523 show-debug-registers' with 'maint set show-debug-registers' and
7524 'maint show show-debug-registers'.
7526 2009-05-12 Joel Brobecker <brobecker@adacore.com>
7528 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
7529 pushing it on the output obstack.
7531 2009-05-11 Joel Brobecker <brobecker@adacore.com>
7533 Fix internal error on breaking at a multi-locations caller source line.
7534 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
7535 command with no parameters.
7537 2009-05-11 Pedro Alves <pedro@codesourcery.com>
7539 * linux-nat.c (enum sigchld_state): Delete.
7540 (linux_nat_async_events_state): Delete.
7541 (struct waitpid_result): Delete.
7542 (waitpid_queue): Delete.
7543 (queued_waitpid_1): Delete.
7544 (async_file_flush): New.
7545 (queued_waitpid, push_waitpid): Delete.
7546 (async_file_mark): New.
7547 (drain_queued_events): Delete.
7548 (my_waitpid): Remove locally queued events handling.
7549 (linux_test_for_tracefork): Upjust.
7550 (linux_child_follow_fork): Ditto.
7551 (sync_sigchld_action): Delete.
7552 (blocked_mask): Reinstate.
7553 (async_sigchld_action): Rename to...
7554 (sigchld_action): ... this.
7555 (block_child_signals): New.
7556 (restore_child_signals_mask): New.
7557 (lin_lwp_attach_lwp): Adjust.
7558 (linux_nat_create_inferior): Ditto.
7559 (linux_nat_attach): Also use lp->status in async mode.
7560 (get_pending_status): Don't use queued_waitpid.
7561 (linux_nat_detach): Don't drain locally queued events.
7562 (linux_nat_resume): Allow pending wait statuses stored lp->status
7563 in async mode. If returning early due to a pending event,
7564 re-register the event source.
7565 (stop_wait_callback): Allow pending wait statuses stored
7566 lp->status in async mode.
7567 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
7568 (linux_nat_wait): Rename to ...
7569 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
7570 lp->status in async mode. Always add WNOHANG to the waitpid
7571 options in async mode.
7572 (linux_nat_wait): New.
7573 (kill_callback): Don't drain locally queued events.
7574 (sigchld_handler): Rewrite.
7575 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
7576 refer to "set target-async".
7577 (linux_nat_async_mask): If in non-stop, and re-enabling async
7578 mode, re-register the target event source in the event loop.
7579 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
7580 (get_pending_events, async_sigchld_handler)
7581 (linux_nat_async_events): Delete.
7582 (handle_target_event): New.
7583 (linux_nat_async_file_handler): Delete.
7584 (linux_async_pipe): New.
7585 (linux_nat_async): Only re-register in the event loop if not
7586 registered yet. Always notify the event-loop once if enabling the
7588 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
7589 lp->status, not in the locally queued event list.
7590 (linux_nat_stop): Don't mask out async event handling.
7591 (linux_nat_setup_async): Delete.
7592 (_initialize_linux_nat): Adjust.
7593 (lin_thread_get_thread_signals): blocked_mask is global again.
7596 2009-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
7598 Unify target macros.
7600 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
7601 (target_stoppped_by_watchpoint): New macro.
7602 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
7603 (target_have_steppable_watchpoint): New macro.
7604 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
7605 (target_have_continuable_watchpoint): New macro.
7606 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
7607 (target_can_use_hardware_watchpoint): New macro.
7608 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
7609 (target_region_ok_for_hw_watchpoint): New macro.
7611 * breakpoint.c (update_watchpoint): Use new macros.
7612 (bpstat_alloc): Likewise.
7613 (create_breakpoint): Likewise.
7614 (watch_command_1): Likewise.
7615 (can_use_hardware_watchpoint): Likewise.
7616 (do_enable_breakpoint): Likewise.
7617 * infrun.c (handle_inferior_event): Adapt to new macros.
7618 * mips-tdep.c (mips_gdbarch_init): Update comments.
7619 * procfs.c (procfs_set_watchpoint): Update comment.
7620 (procfs_insert_watchpoint): Adapt to new macros.
7621 * remote-m32r-sdi.c (m32r_stop):
7622 * remote-mips.c (mips_remove_breakpoint):
7623 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
7624 (debug_to_stopped_by_watchpoint): Likewise.
7627 2009-05-10 Pierre Muller <muller@ics.u-strasbg.fr>
7629 * src/gdb/target.h: Remove all tests for already defined
7630 macros. All macros defined here should not be set in config
7633 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7635 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
7636 (have_ptrace_getsetfpregs): Likewise.
7637 fetch_all_gp_regs): New function.
7638 (fetch_gp_regs): New function.
7639 (fetch_all_fp_regs): Likewise.
7640 (fetch_fp_regs): New function.
7641 (fetch_ppc_registers): Using the new methods to fetch general-
7642 purpose and floating-pointer registers.
7643 (store_all_gp_regs): New function.
7644 (store_gp_regs): Likewise.
7645 (store_all_fp_regs): New function.
7646 (store_fp_regs): Likewise.
7647 (store_ppc_registers): Using the new methods to store general-
7648 purpose and floating-pointer registers.
7650 2009-05-08 Doug Evans <dje@google.com>
7652 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
7654 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7656 * MAINTAINERS (Write After Approval): Add self.
7658 2009-05-07 Joel Brobecker <brobecker@adacore.com>
7660 * gdbarch.h (target_gdbarch): Add comment documenting this global.
7662 2009-05-06 Joel Brobecker <brobecker@adacore.com>
7664 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
7666 * configure: Regenerate.
7668 2009-05-06 Joel Brobecker <brobecker@adacore.com>
7670 * utils.c: Add include of gdb_usleep.h.
7671 (defaulted_query): Detect false EOF conditions that happen
7672 on terminals opened with the O_NONBLOCK flag when there is
7675 2009-05-06 Pedro Alves <pedro@codesourcery.com>
7677 * inferior.c (add_inferior): Move observer_notify_new_inferior
7679 (add_inferior_silent): ... here.
7681 2009-05-06 Pierre Muller <muller@ics.u-strasbg.fr>
7682 Pedro Alves <pedro@codesourcery.com>
7684 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
7685 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
7687 (procfs_stopped_by_watchpoint): Made static, ptid argument
7689 (_initialize_procfs): Register new watchpoint related target
7691 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
7692 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
7693 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
7694 (target_insert_watchpoint, target_remove_watchpoint): Delete.
7695 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
7697 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
7698 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
7699 (target_insert_watchpoint, target_remove_watchpoint): Delete.
7700 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
7702 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
7703 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
7704 (target_insert_watchpoint, target_remove_watchpoint): Delete.
7705 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
7708 2009-05-06 Hui Zhu <teawater@gmail.com>
7710 * i386-tdep.c (i386_process_record): Change bzero to memset.
7712 2009-05-06 Hui Zhu <teawater@gmail.com>
7714 * NEWS: Add item for process record and replay.
7716 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
7718 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
7720 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
7722 * inferior.h (read_pc, write_pc): Remove.
7723 * regcache.c (read_pc, write_pc): Remove.
7725 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
7727 (handle_inferior_event): Use regcache_read_pc instead of read_pc
7728 when determining value of stop_pc. Replace subsequent uses of
7729 read_pc by inspecting already-retrieved stop_pc value.
7730 (keep_going): Use regcache_read_pc instead of read_pc.
7732 * breakpoint.c (watchpoint_check): Use current frame architecture
7733 and PC instead of current_gdbarch and read_pc ().
7734 * tracepoint.c (set_traceframe_context): Replace PC argument
7735 with FRAME argument.
7736 (trace_start_command, finish_tfind_command): Update calls.
7737 (finish_tfind_command): Compare frame IDs to identify transitions
7739 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
7740 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
7741 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
7742 of read_pc and write_pc.
7743 (store_register): Make regcache argument non-const. Update call
7744 to exec_one_dummy_insn.
7746 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
7747 * infcmd.c (post_create_inferior): Likewise.
7748 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
7749 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
7750 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
7751 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
7752 * linux-fork.c (fork_load_infrun_state): Likewise.
7753 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
7754 * record.c (record_wait): Likewise.
7755 * procfs.c (procfs_wait): Likewise.
7756 * remote-mips.c (common_open, mips_wait): Likewise.
7757 * remote-m32r-sdi.c (m32r_resume): Likewise.
7759 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
7760 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
7761 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
7762 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
7763 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
7765 * solib-darwin.c: Include "regcache.h".
7766 * solib-pa64.c: Include "regcache.h".
7767 * solib-svr4.c: Include "regcache.h.".
7769 * symfile.c: Do not mention read_pc or write_pc in comments.
7770 * dink32-rom.c: Likewise.
7771 * m32r-rom.c: Likewise.
7772 * mips-tdep.c: Likewise.
7774 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
7776 * fork-child.c (startup_inferior): Move setting stop_pc ...
7777 * infcmd.c (post_create_inferior): ... to here.
7779 2009-05-04 Michael Snyder <msnyder@vmware.com>
7781 * NEWS: Add item for reverse debugging commands.
7783 2009-05-04 Pedro Alves <pedro@codesourcery.com>
7785 * go32-nat.c (go32_stop): Delete.
7786 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
7787 (go32_create_inferior): Don't call go32_stop or
7789 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
7791 (init_go32_ops): Don't register go32_stop.
7793 2009-05-02 Eli Zaretskii <eliz@gnu.org>
7795 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
7798 * infcall.c (find_function_addr): Avoid compiler warnings for
7801 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
7803 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
7804 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
7806 2009-05-01 Doug Evans <dje@google.com>
7808 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
7811 2009-05-01 Eli Zaretskii <eliz@gnu.org>
7813 * record.c (_initialize_record): Reformat and clarify doc strings
7814 for stop-at-limit and insn-number-max.
7816 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
7818 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
7820 Make specifiable the make_function_type type memory ownership.
7821 * gdbtypes.c (make_function_type): New parameter `objfile', use it
7822 explicitely instead of TYPE-initialized removed local variable
7823 `objfile'. Describe `objfile' it in the function comment.
7824 (lookup_function_type): Update make_function_type callers.
7825 * gdbtypes.h (make_function_type): Update the prototype.
7826 * jv-lang.c (java_link_class_type): Update make_function_type callers.
7827 * dwarf2read.c (read_subroutine_type): Likewise.
7828 * stabsread.c (read_type): Likewise.
7830 2009-05-01 Eli Zaretskii <eliz@gnu.org>
7832 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
7833 printing a bogus "Thread <main>".
7834 (go32_thread_alive): Don't return 1 for null_ptid.
7836 * i386-tdep.c (i386_go32_init_abi): Override the number of
7837 registers due to non-support of SSE.
7839 2009-04-30 Anthony Green <green@moxielogic.com>
7841 * configure.tgt: Link the moxie simulator in with gdb.
7843 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
7845 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
7848 2009-04-30 Hui Zhu <teawater@gmail.com>
7849 Michael Snyder <msnyder@vmware.com>
7851 I386 Linux process record and replay support.
7853 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
7854 This struct has the argument for the function
7855 "record_linux_system_call".
7856 (i386_linux_intx80_sysenter_record): New function. Parse the
7857 system call instruction and call function
7858 "record_linux_system_call" to record execute log.
7859 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
7860 Set "i386_linux_intx80_sysenter_record" to
7861 "i386_intx80_record" and "i386_sysenter_record".
7863 2009-04-30 Hui Zhu <teawater@gmail.com>
7864 Michael Snyder <msnyder@vmware.com>
7866 I386 architecture process record and replay support.
7868 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
7869 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
7871 (aflag, dflag, override, modrm, mod, reg, rm, ot,
7872 i386_record_pc): New variables. Ditto.
7873 (i386_record_modrm, i386_record_lea_modrm_addr,
7874 i386_record_lea_modrm): New functions. Ditto.
7875 (i386_process_record): New function. Parse the instruction in
7876 address "addr" and record the values of registers and memory
7877 that will be changed by this instruction.
7878 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
7879 "process_record" interface.
7880 * i386-tdep.h (gdbarch_tdep): New function pointers
7881 "i386_intx80_record" and "i386_sysenter_record" that point to
7882 the function that can record "intx80" and "sysenter" execute
7885 2009-04-30 Hui Zhu <teawater@gmail.com>
7886 Michael Snyder <msnyder@vmware.com>
7888 * infrun.c (use_displaced_stepping): Return false if process
7889 record and replay target is used.
7890 (proceed): Call function "record_not_record_set" if pocess
7891 record and replay target is used.
7893 2009-04-30 Hui Zhu <teawater@gmail.com>
7894 Michael Snyder <msnyder@vmware.com>
7896 Linux process record and replay support.
7898 * Makefile.in (ALLDEPFILES): Add linux-record.c.
7899 (ALL_TARGET_OBS): Add linux-record.o.
7900 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
7901 (i[34567]86-*-linux*): Add linux-record.o.
7902 * linux-record.c, linux-record.h: New file.
7904 2009-04-30 Hui Zhu <teawater@gmail.com>
7905 Michael Snyder <msnyder@vmware.com>
7907 Process record and replay target.
7909 * Makefile.in (SFILES): Add record.c.
7910 (COMMON_OBS): Add record.o.
7911 * record.c, record.h: New file.
7913 2009-04-30 Hui Zhu <teawater@gmail.com>
7914 Michael Snyder <msnyder@vmware.com>
7916 * target.h (strata): New stratum "record_stratum".
7918 2009-04-30 Hui Zhu <teawater@gmail.com>
7919 Michael Snyder <msnyder@vmware.com>
7921 GDBARCH interface for process record and replay.
7923 * gdbarch.sh (process_record): This interface point to the
7924 function that records the inferior execute log.
7926 2009-04-29 Doug Evans <dje@google.com>
7928 * i386-nat.c (child_post_startup_inferior): Delete, unused.
7930 2009-04-29 Pedro Alves <pedro@codesourcery.com>
7932 * breakpoint.c (print_exception_catchpoint): Access `b' directly
7933 instead of `b->loc->owner'.
7934 (print_mention_exception_catchpoint): Ditto.
7936 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
7938 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
7940 2009-04-27 Tom Tromey <tromey@redhat.com>
7942 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
7944 2009-04-27 Jerome Guitton <guitton@adacore.com>
7946 * symtab.c (append_exact_match_to_sals): New function, extracted
7947 from expand_line_sal.
7948 (expand_line_sal): Use append_exact_match_to_sals to append exact
7949 matches. If none found, append all best items.
7951 2009-04-27 Jerome Guitton <guitton@adacore.com>
7953 * main.c (captured_main): Move gdbinit lookups after gdb_init.
7955 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
7958 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
7959 (read_func_scope): Call inherit_abstract_dies.
7961 2009-04-25 Eli Zaretskii <eliz@gnu.org>
7963 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
7964 sparc-sol2-nat.c and sparc-sol2-tdep.c.
7966 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
7968 2009-04-24 Pierre Muller <muller@ics.u-strasbg.fr>
7970 ARI change: Use "/* ARI: rule */" pattern.
7971 * utils.c: Update ARI patterns.
7972 * gdb_dirent.h: Likewise.
7974 2009-04-23 Anthony Green <green@moxielogic.com>
7976 * MAINTAINERS: Add moxie target.
7977 * configure.tgt: Add moxie-*-elf target.
7978 * moxie-tdep.c: New file.
7979 * moxie-tdep.h: New file.
7981 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7983 * ada-lang.c: Remove an extra empty line. No code change.
7985 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
7987 Fix double free on error inserting the breakpoint instruction.
7988 * breakpoint.c (create_breakpoints): Move the
7989 update_global_location_list call to ...
7990 (break_command_really): ... here together with the second local call
7991 both unified after all the cleanups.
7993 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7994 Tom Tromey <tromey@redhat.com>
7996 * configure, config.in: Regenerate.
7997 * configure.ac: Support for relocatable GDB datadir. Use
7998 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
7999 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
8000 * top.c (init_main): Add "set data-directory".
8001 * defs.h (gdb_datadir): Declare.
8002 * main.c (gdb_datadir): New global.
8003 (captured_main): Initialize gdb_datadir. Use relocate_directory.
8004 (relocate_path): New function.
8005 (relocate_directory): Likewise.
8006 (get_init_files): Use relocate_path.
8007 (README): Mention --with-gdb-datadir.
8009 2009-04-23 Joel Brobecker <brobecker@adacore.com>
8011 * ada-tasks (task_command_1): Call target_find_new_threads.
8013 2009-04-23 Joel Brobecker <brobecker@adacore.com>
8015 * stack.c (do_gdb_disassembly): Print the exception message if an
8016 error was thrown while trying to perform the disassembly.
8018 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
8020 * varobj.c (free_variable): Replace free_current_contents by xfree.
8022 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
8024 * arm-linux-nat.c (fetch_register, store_register): Use
8025 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
8026 * arm-linux-tdep.c (arm_linux_supply_gregset,
8027 arm_linux_collect_gregset): Likewise.
8028 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
8029 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
8031 2009-04-22 Hui Zhu <teawater@gmail.com>
8033 * stack.c (_initialize_stack): Set the default of
8034 disassemble-next-line to off.
8036 2009-04-21 Tom Tromey <tromey@redhat.com>
8038 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
8039 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
8041 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
8043 * configure.ac: Add quotes to not lose brackets in help text.
8044 * configure: Rebuild.
8046 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
8048 * configure.ac: Don't postprocess Makefile in config.status.
8049 Substitute GDB_NM_FILE. Don't substitute nm_h.
8050 * Makefile.in (GDB_NM_FILE): Substitute.
8051 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
8052 * configure: Regenerate.
8053 * gnulib/Makefile.in: Regenerate.
8055 2009-04-21 Joseph Myers <joseph@codesourcery.com>
8057 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
8058 --with-htmldir): New.
8059 * configure: Regenerate.
8061 2009-04-21 Tom Tromey <tromey@redhat.com>
8063 * configure: Rebuild.
8064 * configure.ac: Use lower case for start of help strings. Clean
8065 up --with-sysroot help.
8067 2009-04-21 Tom Tromey <tromey@redhat.com>
8069 * configure: Rebuild.
8070 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
8071 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
8074 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
8076 ARI fix: remove "%p".
8077 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
8078 (ia64_sigtramp_frame_this_id): Ditto.
8079 (ia64_libunwind_frame_this_id): Ditto.
8080 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
8081 * symmisc.c (maintenance_info_psymtabs): Ditto.
8083 2009-04-21 Joseph Myers <joseph@codesourcery.com>
8085 * configure.ac (--with-relocated-sources): New.
8086 * configure, config.in: Regenerate.
8087 * source.c (add_substitute_path_rule): Remove static.
8088 * source.h (add_substitute_path_rule): Declare.
8089 * main.c: Include "source.h".
8090 (captured_main): Add substitution rule if RELOC_SRCDIR.
8092 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
8094 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
8096 2009-04-20 David Daney <ddaney@caviumnetworks.com>
8098 * NEWS: Mention MIPS/Linux hardware watchpoint support.
8100 2009-04-20 David Daney <ddaney@caviumnetworks.com>
8102 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
8103 (maint_show_dr, super_close): New variables.
8104 (super_fetch_registers, super_store_registers): Make static.
8105 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
8106 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
8107 (pt_watch_style): Define new enum.
8108 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
8110 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
8112 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
8113 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
8114 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
8115 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
8116 (type_to_irw, fill_mask, try_one_watch)
8117 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
8118 (mips_linux_new_thread, populate_regs_from_watches)
8119 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
8120 (mips_linux_close): New functions.
8121 (_initialize_mips_linux_nat): Register watchpoint functions with
8122 the target_ops. Add show-debug-regs maintenance command.
8124 2009-04-20 David Daney <ddaney@caviumnetworks.com>
8126 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
8128 2009-04-19 Pedro Alves <pedro@codesourcery.com>
8130 * NEWS: Mention gdbserver support for x86 Windows CE.
8132 2009-04-19 Eli Zaretskii <eliz@gnu.org>
8134 * config/djgpp/fnchange.lst: Fix typos.
8136 Set default host and target charsets in the DJGPP port.
8138 * config/djgpp/config.sed (am_cv_langinfo_codeset)
8139 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
8140 in all configure scripts that define ac_cv_env_CPP_value.
8142 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
8145 * config/djgpp/nl_types.h: New file.
8147 * config/djgpp/langinfo.h: New file.
8149 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
8151 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
8153 * Makefile.in (MAKEHTML): Set to makeinfo --html.
8154 (MAKEHTMLFLAGS): Set to empty.
8156 2009-04-18 Eli Zaretskii <eliz@gnu.org>
8158 * NEWS: Mention all new set/show commands added since GDB 6.8 was
8161 * go32-nat.c (go32_sysinfo): Check if the call to
8162 __dpmi_get_capabilities fills the buffer with information, and
8163 don't use the buffer if not.
8165 2009-04-17 Tom Tromey <tromey@redhat.com>
8167 * charset.c (_initialize_charset): Add special case for "646".
8169 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
8171 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
8172 * configure: Regenerate.
8173 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
8174 configure substitutions.
8175 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
8177 2009-04-17 Pierre Muller <muller@ics.u-strasbg.fr>
8179 ARI fix: Do not use %p, replace by call to host_address_to_string
8181 * darwin-nat.c (darwin_xfer_partial): Apply change.
8182 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
8183 * gnu-nat.h (proc_debug): Ditto.
8184 * symmisc.c (maintenance_info_symtabs): Ditto.
8185 (maintenance_info_psymtabs): Ditto.
8186 * windows-nat.c (handle_load_dll): Ditto.
8187 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
8188 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
8190 2009-04-17 Joseph Myers <joseph@codesourcery.com>
8192 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
8193 --enable-64-bit-bfd.
8194 (sparc-*-linux*): Likewise.
8196 2009-04-17 Eli Zaretskii <eliz@gnu.org>
8198 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
8201 2009-04-16 Pedro Alves <pedro@codesourcery.com>
8203 * remote.c (remote_query_attached): Fix pasto in packet_ok result
8206 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8208 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
8209 Revert the previous change. Might not be correct, actually.
8211 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8213 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
8214 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
8215 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
8216 Remove declaration. These are non-existent functions.
8218 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8220 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
8221 Fix a compilation warning on mips-irix due to casting from
8222 a pointer of different size.
8224 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8226 * ada-lang.c (symtab_for_sym): Delete.
8227 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
8229 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8231 * ada-lang.c (extract_string): Delete.
8232 (ada_main_name): Reimplement using target_read_string instead of
8235 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
8237 * m68klinux-nat.c: Remove obsolete comment.
8238 (fetch_register, store_register): Don't call
8239 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
8240 which are always nops here.
8242 2009-04-14 Tom Tromey <tromey@redhat.com>
8244 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
8245 (c_printstr): Likewise.
8246 * charset.c: Include gdb_wait.h.
8247 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
8248 (find_charset_names): Use pexecute. Handle libiconv's output.
8250 (_initialize_charset): Use xstrdup.
8251 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
8253 (INTERMEDIATE_ENCODING): New define.
8254 * configure, config.in: Rebuild.
8255 * configure.ac: Check for btowc.
8257 2009-04-15 Tom Tromey <tromey@redhat.com>
8259 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
8261 2009-04-15 Eli Zaretskii <eliz@gnu.org>
8263 * utils.c (parse_escape): Initialize target_char to pacify GCC.
8265 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8267 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
8269 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
8271 ARI fix: sprintf rule.
8272 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
8273 * ada-lang.c (add_angle_brackets): Use xstrprintf.
8274 (ada_decode): Replace sprintf by xsnprintf.
8275 (find_old_style_renaming_symbol): Ditto.
8276 (ada_to_fixed_type_1, ada_enum_name): Ditto.
8279 2009-04-14 Joel Brobecker <brobecker@adacore.com>
8281 * target.c (target_mourn_inferior): Call bfd_cache_close_all
8282 after having executed the target mourn_inferior routine.
8284 2009-04-14 Eli Zaretskii <eliz@gnu.org>
8286 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
8289 2009-04-13 David Daney <ddaney@caviumnetworks.com>
8291 * infrun.c (maybe_software_singlestep): New function.
8292 (resume): Call maybe_software_singlestep.
8293 (handle_inferior_event): Same.
8295 2009-04-13 Tom Tromey <tromey@redhat.com>
8297 * python/python-frame.c (frapy_richcompare): Return
8298 Py_NotImplemented, not an error. Handle Py_NE as well.
8300 2009-04-13 Eli Zaretskii <eliz@gnu.org>
8302 * charset.c (EILSEQ): Define if not defined by system headers.
8304 2009-04-11 Eli Zaretskii <eliz@gnu.org>
8306 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
8307 to be consistent with renaming config.intl.in into config_intl.in.
8309 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
8310 consistent with the change from 2008-11-09.
8312 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
8314 * gdbtypes.c: Remove excessive parentheses at the return keywords.
8315 * varobj.c (varobj_invalidate): Fix indentation.
8316 * varobj.c (varobj_invalidate): Fix formatting text width.
8318 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
8320 Implement -exec-jump.
8322 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
8323 * mi/mi-main.c (mi_cmd_exec_jump): New.
8324 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
8326 2009-04-07 Doug Evans <dje@google.com>
8328 * symfile.c (symbol_file_clear): Fix indentation.
8330 2009-04-06 Mark Kettenis <kettenis@gnu.org>
8332 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
8334 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
8336 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
8337 (ppc_linux_auxv_parse): New function.
8338 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
8339 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
8341 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
8343 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
8344 BFD to contents of SPU name note.
8345 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
8346 with "from_tty" argument 1 instead of 0.
8348 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
8351 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
8352 Create the symbol in local scope.
8353 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
8355 2009-04-02 Keith Seitz <keiths@redhat.com>
8357 * stabsread.c (read_member_functions): GCC may emit an extra space
8358 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
8359 whitespace when looking for these functions.
8361 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8363 Change the default value for "set print frame-arguments" to scalars.
8365 * stack.c (print_frame_arguments): Set initial value to "scalars".
8367 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
8369 * mips-tdep.c (mips_numeric_register_alieses): New definition.
8370 (mips_gdbarch_init): Add user registers from
8371 mips_numeric_register_aliases.
8373 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8375 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
8377 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8379 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
8380 this is the last one.
8382 2009-04-01 Pedro Alves <pedro@codesourcery.com>
8384 * remote.c (append_resumption): New.
8385 (remote_vcont_resume): Use it.
8387 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8389 * windows-nat.c (+windows_get_ada_task_ptid): New function.
8390 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
8392 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
8393 Keith Seitz <keiths@redhat.com>
8394 Jan Kratochvil <jan.kratochvil@redhat.com>
8397 * Makefile.in (dbxread.o): Update.
8398 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
8399 * dwarf2read.c (GDB_FORM_cached_string): New.
8400 (read_partial_die): Use dwarf2_canonicalize_name.
8401 (dwarf2_linkage_name): Use dwarf2_name.
8402 (dwarf2_canonicalize_name): New.
8403 (dwarf2_name): Use dwarf2_canonicalize_name.
8404 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
8405 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
8406 * symtab.c (lookup_symbol_in_language): Canonicalize input before
8408 * cp-name-parser.y: operator() requires two parameters,
8409 according to libiberty.
8410 * minsyms.c (lookup_minimal_symbol): Canonicalize input
8414 2009-03-31 Joel Brobecker <brobecker@adacore.com>
8416 Provide support for (Ada) task-specific breakpoints.
8418 * ada-lang.h (ada_get_task_number): Add declaration.
8419 (breakpoint_ada_task_match): Delete declaration.
8420 * ada-tasks.c (ada_get_task_number): Make non-static.
8421 * breakpoint.h (struct breakpoint): Add field "task".
8422 * breakpoint.c (print_one_breakpoint_location): Add handling of
8423 task-specific breakpoints.
8424 (create_breakpoint, create_breakpoints, find_condition_and_thread):
8425 New parameter "task".
8426 (break_command_really): Update calls to find_condition_and_thread
8427 and create_breakpoints.
8428 (breakpoint_re_set_one): Update call to find_condition_and_thread.
8431 2009-03-31 Joel Brobecker <brobecker@adacore.com>
8433 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
8435 2009-03-31 Pedro Alves <pedro@codesourcery.com>
8437 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
8438 if the thread's ptid without a thread id field is in the list
8439 before calling thread_change_ptid.
8440 (extended_remote_attach_1): In non-stop mode, do not rely on
8441 querying the current thread, instead, query the thread list, and
8442 select the first thread of the process.
8443 * gdbthread.h (first_thread_of_process): Declare.
8444 * thread.c (first_thread_of_process): Define.
8446 2009-03-30 Stan Shebs <stan@codesourcery.com>
8448 Make tracepoints into a type of breakpoint.
8449 * breakpoint.h (enum bptype): Add bp_tracepoint.
8450 (struct breakpoint): Add fields step_count, pass_count, actions.
8451 (get_tracepoint, get_tracepoint_by_number): Declare.
8452 (all_tracepoints): Declare.
8453 * breakpoint.c: Include tracepoint.h, readline.h.
8454 (ALL_TRACEPOINTS): Move here from tracepoint.c.
8455 (tracepoint_count): Ditto.
8456 (should_be_inserted): GDB does not insert tracepoints itself.
8457 (print_it_typical): Add tracepoint case.
8458 (bpstat_what): Ditto.
8459 (print_one_breakpoint_location): Ditto, and add printing for
8460 pass count, step count, and action list.
8461 (user_settable_breakpoint): Add tracepoint case.
8462 (allocate_bp_location): Ditto.
8463 (set_breakpoint_location_function): Ditto.
8464 (disable_breakpoints_in_shlibs): Ditto.
8466 (break_command_really): Add argument traceflag, use to choose
8467 basic breakpoint type.
8468 (break_command_1): Pass extra argument.
8469 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
8470 (breakpoint_re_set_one): Add tracepoint case.
8471 (disable_command, enable_command): Ditto.
8472 (set_tracepoint_count): Move here from tracepoint.c.
8473 (trace_command): Move here from tracepoint.c and use
8474 break_command_really.
8475 (tracepoints_info): Move here from tracepoint.c and call
8477 (enable_trace_command): Move here from tracepoint.c and call
8479 (disable_trace_command): Move here from tracepoint.c and call
8481 (delete_trace_command): Move here from tracepoint.c and call
8483 (trace_pass_command): Move here from tracepoint.c.
8484 (get_tracepoint_by_number): Ditto.
8485 (tracepoint_save_command): Ditto.
8486 (get_tracepoint): New function.
8487 (all_tracepoints): New function.
8488 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
8489 deprecate "enable trace" and "disable trace" commands.
8490 * tracepoint.h (struct tracepoint): Remove.
8491 (tracepoint_chain): Remove decl.
8492 (deprecated_create_tracepoint_hook): Remove decl.
8493 (deprecated_delete_tracepoint_hook): Remove decl.
8494 (deprecated_modify_tracepoint_hook): Remove decl.
8495 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
8496 (free_actions): Update signature.
8497 (validate_actionline): Update signature.
8498 (end_actions_pseudocommand): Declare.
8499 (while_stepping_pseudocommand): Declare.
8500 * tracepoint.c: Include breakpoint.h.
8501 (tracepoint_chain, tracepoint_count): Remove.
8502 (free_actions, make_cleanup_free_actions): Update signature.
8503 (trace_command, set_raw_tracepoint): Remove.
8504 (trace_mention): Remove.
8505 (tracepoints_info): Remove.
8506 (tracepoint_operation, map_args_over_tracepoints): Remove.
8507 (get_tracepoint_by_number): Remove.
8508 (enable_trace_command, disable_trace_command): Remove.
8509 (delete_trace_command, trace_pass_command): Remove.
8510 (trace_actions_command, read_actions): Update signature.
8511 (validate_actionline): Update signature, use bp loc.
8512 (encode_actions): Ditto.
8513 (download_tracepoint): New function, body of trace_start_command.
8514 (trace_start_command): Call it, use all_tracepoints.
8515 (tracepoint_save_command): Remove.
8516 (tracepoint_dump_command): Use get_tracepoint.
8517 (end_actions_pseudocommand): Make globally visible.
8518 (while_stepping_pseudocommand): Ditto.
8519 (_initialize_tracepoint): Move command definitions to breakpoint.c.
8521 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
8523 Expose frames to Python.
8524 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
8525 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
8526 (python-frame.o): New target.
8527 * python/python-frame.c: New file.
8528 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
8529 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
8530 gdbpy_initialize_frames): New prototypes.
8531 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
8532 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
8534 * stack.c (find_frame_funname): New function, factored out of
8536 (print_frame): Call find_frame_funname.
8537 * stack.h (find_frame_funname): Add prototype.
8539 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
8541 Remove unused value_object attribute `owned_by_gdb'.
8542 * python/python-value.c (value_object): Remove owned_by_gdb
8544 (valpy_dealloc): Remove reference to self->owned_by_gdb.
8545 (valpy_new): Likewise.
8546 (value_to_value_object): Likewise.
8548 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
8550 Change gdb.Value.address from a method to an attribute.
8551 * python/python-value.c (value_object): Add `address' element.
8552 (valpy_dealloc): Decrement reference to self->address if set.
8553 (valpy_new): Initialize val_obj->address.
8554 (valpy_address): Rename to ...
8555 (valpy_get_address): ... this. Change signature from method to
8556 attribute. Update self->address if not set.
8557 (value_to_value_object): Initialize val_obj->address.
8558 (value_object_getset): Add `address' element.
8559 (value_object_methods): Remove `address' element.
8561 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
8563 * observer.sh: Set LANG/LC_ALL to C, not c.
8565 2009-03-28 Kevin Buettner <kevinb@redhat.com>
8567 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
8570 2009-03-28 Pedro Alves <pedro@codesourcery.com>
8572 * remote.c (remote_stop_ns): If multi-process extensions are off,
8573 and GDB is requesting the whole process to stop, sent "vCont;t",
8576 2009-03-28 Pedro Alves <pedro@codesourcery.com>
8578 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
8581 2009-03-27 Eli Zaretskii <eliz@gnu.org>
8583 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
8585 2009-03-26 Doug Evans <dje@google.com>
8587 * thread.c (do_restore_current_thread_cleanup): Redo test for
8588 whether to restore old->inferior_ptid.
8590 2009-03-26 Tom Tromey <tromey@redhat.com>
8592 * breakpoint.c (resolve_sal_pc): Preserve original line number
8593 when skipping prologue.
8595 2009-03-26 Doug Evans <dje@google.com>
8597 * thread.c (inferior_thread) Remove "extern" in definition.
8599 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
8601 Add gdb.Value.is_optimized_out attribute.
8602 * python/python-value.c (valpy_get_is_optimized_out): New
8604 (value_object_getset): New variable.
8605 (value_object_type): Initialize tp_getset element.
8607 2009-03-26 Joel Brobecker <brobecker@adacore.com>
8609 Recognize missing DW_AT_location as <value optimized out>.
8611 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
8612 Call add_symbol_to_list.
8614 2009-03-25 Tom Tromey <tromey@redhat.com>
8616 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
8617 * stack.c (print_this_frame_argument_p): Use check_typedef.
8619 2009-03-25 Tom Tromey <tromey@redhat.com>
8621 * configure: Rebuild.
8622 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
8623 Rearrange flags setting. Add comments.
8625 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8627 * config/i386/nm-i386.h: Remove code within
8628 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
8629 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
8631 * config/i386/nm-cygwin64.h: Ditto.
8632 * config/i386/nm-fbsd.h: Ditto.
8633 * config/i386/nm-go32.h: Ditto.
8634 * config/i386/nm-linux.h: Ditto.
8635 * config/i386/nm-linux64.h: Ditto.
8637 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8639 ARI fix: "xasprintf" rule.
8640 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
8642 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8644 * remote.c (remote_start_remote): In non-stop mode, call
8645 init_wait_for_inferior before adding threads and inferiors.
8647 2009-03-25 Joel Brobecker <brobecker@adacore.com>
8649 * breakpoint.c (breakpoint_thread_match): Split a large condition
8650 into several smaller conditions. No behavior change.
8652 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8654 * infrun.c (infrun_thread_thread_exit): New.
8655 (_initialize_infrun): Attach it to the thread_exit observer.
8656 * thread.c (delete_thread_1): Always call the observer, passing it
8658 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
8659 SILENT, return immediately.
8661 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8663 * infrun.c (normal_stop): Use has_stack_frames instead of
8665 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
8666 when there is no thread selected.
8667 (mi_cmd_execute): Don't special case commands that can run without
8668 a valid selected thread.
8669 * top.c (execute_command): Don't special case commands that can
8670 run without a valid selected thread. Use has_stack_frames.
8671 * infcmd.c (ensure_valid_thread): New.
8672 (continue_1, step_1, jump_command, signal_command): Use it.
8673 (detach_command): Error out if there's no selected thread/inferior.
8674 * thread.c (print_thread_info): Allow having no thread selected.
8675 (switch_to_thread): Don't read the PC if there is no current thread.
8676 (do_restore_current_thread_cleanup): Don't record the current
8677 frame if there is no current thread.
8678 (make_cleanup_restore_current_thread): Don't read frame info if
8679 there is no selected thread.
8680 (_initialize_thread): Don't mark commands as
8681 "no_selected_thread_ok".
8682 * frame.c (get_current_frame): Error out if there is no valid
8684 (has_stack_frames): Return false if there is no valid
8686 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
8687 "no_selected_thread_ok".
8688 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
8689 (get_cmd_no_selected_thread_ok): Delete.
8690 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
8691 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
8693 * stack.c (get_selected_block): Use has_stack_frames.
8695 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
8697 Fix size of FPSCR in Power 7 processors.
8698 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
8699 (PPC_FEATURE_HAS_DFP): New #define.
8700 (ppc_linux_read_description): Check for DFP feature instead of
8701 ISA 2.05 to decide on size of the FPSCR.
8703 2009-03-25 Kevin Buettner <kevinb@redhat.com>
8705 * mn10300-tdep.c (trad-frame.h): Don't include.
8706 (prologue-value.h): Include.
8707 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
8708 (struct mn10300_prologue): Define.
8709 (push_reg, translate_rreg, check_for_saved): New functions.
8710 (mn10300_analyze_prologue): Rewrite, using prologue-value
8711 machinery. Handle more instructions than before. Permit
8712 instructions to occur in any order.
8713 (mn10300_skip_prologue): Find the extents of the function
8714 in question; mn10300_analyze_prologue no longer does this.
8715 (mn10300_analyze_frame_prologue): New function.
8716 (mn10300_frame_base): New function.
8717 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
8719 (mn10300_frame_prev_register): Likewise.
8720 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
8721 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
8723 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
8725 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8727 Fix completer problem for filename completion on the first try.
8729 * gdb/completer.h (gdb_completion_word_break_characters): New function.
8730 * gdb/completer.c: Include gdb_assert.h.
8731 (complete_line_internal_reason): New enum.
8732 (complete_line_internal): Change last argument type to
8733 complete_line_internal_reason.
8734 Modify function to handle the different complete_line_internal_reason
8736 (complete_line): Adapt to change in complete_line_internal.
8737 (command_completer): Ditto.
8738 (gdb_completion_word_break_characters): Implement new function.
8739 * top.c (init_main): Set rl_completion_word_break_hook to
8740 gdb_completion_word_break_characters.
8743 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8745 ARI fix: "strlen d_name" rule.
8746 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
8749 2009-03-24 Tom Tromey <tromey@redhat.com>
8750 Pedro Alves <pedro@codesourcery.com>
8752 * configure, config.in: Rebuild.
8753 * configure.ac: Check for libiconvlist.
8754 * charset.c: Check HAVE_LIBICONVLIST.
8755 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
8756 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
8757 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
8759 (INTERNAL_CFLAGS_BASE): Update.
8760 (INTERNAL_LDFLAGS): Update.
8763 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
8765 * configure.ac: Initialize the variable $PREFER_CURSES.
8766 * configure: Regenerated.
8768 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
8770 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
8771 * configure: Regenerated.
8773 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
8775 ARI fix: "strerror" rule.
8776 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
8777 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
8779 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8781 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
8782 before looking up the fields inside our struct type.
8784 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8786 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
8787 trying to resolve the type qualification.
8789 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8791 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
8792 we try to apply the attribute on the real type, rather than
8793 its associated typedef.
8795 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8797 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
8798 to make sure we try to get the modulus of the actual type, not the
8801 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8803 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
8804 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
8805 to get the real type, not the associated typedef.
8807 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8809 * ada-lang.c (ada_get_field_index): Add handling of the case
8810 when TYPE is a typedef of a struct.
8812 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8814 Add gdb_usleep as a portable version of usleep based on gdb_select.
8815 * gdb_usleep.h, gdb_usleep.c: New files.
8816 * Makefile.in (SFILES): Add gdb_usleep.c.
8817 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
8818 (COMMON_OBS): Add gdb_usleep.o.
8819 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
8820 by call to gdb_usleep.
8822 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8824 * buildsym.c (end_symtab): If we ignore the subfiles, then
8825 unlink the associated symtabs if they were already allocated.
8827 2009-03-23 Jerome Guitton <guitton@adacore.com>
8829 Provide a way to force building of GDB with libcurses.
8830 * configure.ac: Add --with-curses.
8831 * configure: Regenerated.
8833 2009-03-23 Tom Tromey <tromey@redhat.com>
8835 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
8838 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
8840 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
8841 solib_contains_address_p instead of searching.
8843 2009-03-23 Tom Tromey <tromey@redhat.com>
8845 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
8846 (iconv): Make 'inbuf' argument const.
8847 (convert_between_encodings): Use ICONV_CONST.
8848 (wchar_iterate): Likewise.
8850 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
8852 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
8853 dynamically loaded function.
8854 (LookupPrivilegeValueA): Ditto.
8855 (OpenProcessToken): Ditto.
8856 (AdjustTokenPrivileges): Rename and define placeholder for address of
8857 dynamically loaded function.
8858 (LookupPrivilegeValueA): Ditto.
8859 (OpenProcessToken): Ditto.
8860 (set_process_privilege): Remove check for loaded functions.
8861 (bad_OpenProcessToken): Define.
8862 (_initialize_loadable): Load token functions from advapi here, setting
8863 OpenProcessToken function to a dummy static function which always return
8864 error if OS doesn't support this functionality.
8866 2009-03-22 Nicolas Roche <roche@adacore.com>
8867 Christopher Faylor <me+cygwin@cgf.cx>
8869 * win32-nat.c (ctrl_c_handler): New function.
8870 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
8871 is run in a separate console.
8873 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
8875 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
8876 for dynamically loaded function.
8877 (DebugBreakProcess): Ditto.
8878 (DebugSetProcessKillOnExit): Ditto.
8879 (EnumProcessModules): Ditto.
8880 (GetModuleFileNameExA): Ditto.
8881 (GetModuleInformation): Ditto.
8882 (DebugActiveProcessStop): Rename and define placeholder for address of
8883 dynamically loaded function.
8884 (DebugBreakProcess): Ditto.
8885 (DebugSetProcessKillOnExit): Ditto.
8886 (EnumProcessModules): Ditto.
8887 (GetModuleFileNameExA): Ditto.
8888 (GetModuleInformation): Ditto.
8889 (psapi_loaded): Delete.
8890 (get_module_name): Don't check psapi_loaded, just rely on the fact that
8891 dynamically loaded functions will return failure if they weren't
8893 (has_detach_ability): Delete.
8894 (windows_attach): Remove call to has_detach_ability (). Just rely on
8895 functions being callable.
8896 (bad_DebugActiveProcessStop): Define.
8897 (bad_DebugBreakProcess): Ditto.
8898 (bad_DebugSetProcessKillOnExit): Ditto.
8899 (bad_EnumProcessModules): Ditto.
8900 (bad_GetModuleFileNameExA): Ditto.
8901 (bad_GetModuleInformation): Ditto.
8902 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
8903 dynamic storage here, setting nonexistent functions to dummy static
8904 functions which always return error.
8906 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8908 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
8909 to the about_to_proceed observer notification.
8910 (mi_about_to_proceed): New.
8911 (mi_on_resume): Only output ^running and the prompt here if the
8912 target was proceeded.
8913 * breakpoint.c (breakpoint_proceeded): New static.
8914 (breakpoint_about_to_proceed): New.
8915 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
8916 the about_to_proceed observer notification.
8917 * inferior.h (breakpoint_proceeded): Delete declaration.
8918 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
8919 Notify the about_to_proceed observers.
8920 (struct inferior_status): Delete breakpoint_proceeded member.
8921 (save_inferior_status): Don't save it.
8922 (restore_inferior_status): Don't restore it.
8923 * mi-main.h (mi_proceeded): Declare.
8924 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
8927 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8929 * gdbthread.h (struct thread_info): Add in_infcall member.
8930 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
8931 Remove reverences to suppress_resume_observer. Refresh
8932 `call_thread' after returning from `proceed'.
8933 * infcmd.c (suppress_resume_observer): Delete.
8934 * inferior.h (suppress_resume_observer): Delete declaration.
8935 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
8937 * thread.c (set_running): Remove references to
8938 suppress_resume_observer.
8939 * infrun.c (struct inferior_status): Add in_infcall member.
8940 (save_inferior_status): Save it.
8941 (restore_inferior_status): Restore it.
8943 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8945 * infcall.c (run_inferior_call): Remove references to
8946 suppress_stop_observer.
8947 * infcmd.c (suppress_stop_observer): Delete.
8948 (finish_command_continuation): Remove NOTE. Don't clear
8949 suppress_stop_observer anymore.
8950 (finish_command_continuation_free_arg): Likewise.
8951 (finish_forward): Remove references to suppress_stop_observer.
8952 Call normal_stop observer if we haven't already.
8953 * inferior.h (suppress_stop_observer): Delete.
8954 * infrun.c (normal_stop): When deciding to suppress the
8955 normal_stop observer, check for proceed_to_finish instead of
8956 suppress_stop_observer.
8958 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8960 * symfile.c (symfile_relocate_debug_section): Remove check for
8963 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
8964 Jim Blandy <jimb@red-bean.com>
8965 Thiago Jung Bauermann <bauerman@br.ibm.com>
8966 Tom Tromey <tromey@redhat.com>
8968 Miscellaneous fixes to the Python code.
8969 * python/python-cmd.c (cmdpy_init): Accept keyword
8971 * python/python-value.c (valpy_string): Accept keyword
8973 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
8974 Do not call value_to_value_object on NULL RES_VAL.
8975 (value_object_methods): Change `string' entry to also accept
8977 (convert_value_from_python): Return a copy of the value if obj is
8979 (value_object_methods): Mark the `string' method as accepting
8980 keywords, and show method "prototype" in the doc string.
8981 * python/python.c (get_parameter): Don't return inside a
8984 2009-03-20 Tom Tromey <tromey@redhat.com>
8986 Add support for convenience functions in Python.
8987 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
8988 (SUBDIR_PYTHON_SRCS): Add python-function.c.
8989 (python-function.o): New target.
8990 * eval.c: Include "python/python.h" and <ctype.h>.
8991 (evaluate_subexp_standard): Handle values of type
8992 TYPE_CODE_INTERNAL_FUNCTION.
8993 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
8994 * parse.c (write_exp_string): Remove duplicate word in comment.
8995 * python/python-function.c: New file.
8996 * python/python-internal.h (gdbpy_initialize_functions): Add
8998 * python/python.c (_initialize_python): Call
8999 gdbpy_initialize_functions.
9000 * valprint.c (value_check_printable): Handle values of type
9001 TYPE_CODE_INTERNAL_FUNCTION.
9002 * value.c: Include "cli/cli-decode.h".
9003 (internal_function): New struct.
9004 (functionlist, internal_fn_type): New static variables.
9005 (lookup_only_internalvar,
9006 lookup_internalvar): Add const qualifier to name argument.
9007 (create_internalvar): Likewise. Initialize new field.
9008 (set_internal_var): Fix typo in comment. Don't allow assignment
9009 to canonical variable.
9010 (value_create_internal_function, value_internal_function_name,
9011 call_internal_function, function_command, function_destroyer,
9012 add_internal_function): New functions.
9013 (_initialize_values): Create `function' placeholder command.
9014 Initialize internal_fn_type.
9015 * value.h (lookup_only_internalvar, create_internalvar,
9016 lookup_internalvar): Add const qualifier to name argument.
9017 (internal_function_fn, add_internal_function, call_internal_function,
9018 value_internal_function_name): Add prototypes.
9019 (struct internalvar) <canonical>: New field.
9021 2009-03-20 Tom Tromey <tromey@redhat.com>
9023 * c-lang.c (evaluate_subexp_c): Call check_typedef.
9025 2009-03-20 Tom Tromey <tromey@redhat.com>
9026 Julian Brown <julian@codesourcery.com>
9028 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
9029 PR i18n/9401, PR exp/9613:
9031 * value.h (value_typed_string): Declare.
9032 (val_print_string): Update.
9033 * valprint.h (print_char_chars): Update.
9034 * valprint.c (print_char_chars): Add type argument. Update.
9035 (val_print_string): Likewise.
9036 * valops.c (value_typed_string): New function.
9037 * utils.c (host_char_to_target): New function.
9038 (parse_escape): Use host_char_to_target, host_hex_value. Update.
9040 (no_control_char_error): Remove.
9041 * typeprint.c (print_type_scalar): Update.
9042 * scm-valprint.c (scm_scmval_print): Update.
9043 * scm-lang.h (scm_printchar, scm_printstr): Update.
9044 * scm-lang.c (scm_printchar): Add type argument.
9045 (scm_printstr): Likewise.
9046 * printcmd.c (print_formatted): Update.
9047 (print_scalar_formatted): Update.
9048 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
9049 Handle '%lc' and '%ls'.
9050 * parser-defs.h (struct typed_stoken): New type.
9051 (struct stoken_vector): Likewise.
9052 (write_exp_string_vector): Declare.
9053 * parse.c (write_exp_string_vector): New function.
9054 * p-valprint.c (pascal_val_print): Update.
9055 * p-lang.h (is_pascal_string_type, pascal_printchar,
9056 pascal_printstr): Update.
9057 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
9058 Add 'char_type' argument.
9059 (pascal_emit_char): Add type argument.
9060 (pascal_printchar): Likewise.
9061 (pascal_printstr): Likewise.
9062 * objc-lang.c (objc_emit_char): Add type argument.
9063 (objc_printchar): Likewise.
9064 (objc_printstr): Likewise.
9065 * macroexp.c (get_character_constant): Handle unicode characters.
9067 (get_string_literal): Handle unicode strings. Use
9069 * m2-valprint.c (print_unpacked_pointer): Update.
9070 (m2_print_array_contents): Update.
9071 (m2_val_print): Update.
9072 * m2-lang.c (m2_emit_char): Add type argument.
9073 (m2_printchar): Likewise.
9074 (m2_printstr): Likewise.
9075 * language.h (struct language_defn) <la_printchar>: Add type
9077 <la_printstr, la_emitchar>: Likewise.
9078 (LA_PRINT_CHAR): Likewise.
9079 (LA_PRINT_STRING): Likewise.
9080 (LA_EMIT_CHAR): Likewise.
9081 * language.c (unk_lang_emit_char): Add type argument.
9082 (unk_lang_printchar): Likewise.
9083 (unk_lang_printstr): Likewise.
9084 * jv-valprint.c (java_val_print): Update.
9085 * jv-lang.c (java_emit_char): Add type argument.
9086 * f-valprint.c (f_val_print): Update.
9087 * f-lang.c (f_emit_char): Add type argument.
9088 (f_printchar): Likewise.
9089 (f_printstr): Likewise.
9090 * expprint.c (print_subexp_standard): Update.
9091 * charset.h (target_wide_charset): Declare.
9092 (c_target_char_has_backslash_escape, c_parse_backslash,
9093 host_char_print_literally, host_char_to_target,
9094 target_char_to_host, target_char_to_control_char): Remove.
9095 (enum transliterations): New type.
9096 (convert_between_encodings): Declare.
9097 (HOST_ESCAPE_CHAR): New define.
9098 (host_letter_to_control_character, host_hex_value): Declare.
9099 (enum wchar_iterate_result): New enum.
9100 (struct wchar_iterator): Declare.
9101 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
9102 wchar_push_back): Declare.
9103 * charset-list.h: New file.
9104 * c-valprint.c (textual_name): New function.
9105 (textual_element_type): Handle wide character types.
9106 (c_val_print): Pass original type to textual_element_type. Handle
9107 wide character types.
9108 (c_value_print): Use textual_element_type. Pass original type of
9110 * c-lang.h (enum c_string_type): New type.
9111 (c_printchar, c_printstr): Update.
9112 * c-lang.c (classify_type): New function.
9113 (print_wchar): Likewise.
9114 (c_emit_char): Add type argument. Handle wide characters.
9115 (c_printchar): Likewise.
9116 (c_printstr): Add type argument. Handle wide and multibyte
9118 (convert_ucn): New function.
9119 (emit_numeric_character): Likewise.
9120 (convert_octal): Likewise.
9121 (convert_hex): Likewise.
9122 (ADVANCE): New macro.
9123 (convert_escape): New function.
9124 (parse_one_string): Likewise.
9125 (evaluate_subexp_c): Likewise.
9126 (exp_descriptor_c): New global.
9127 (c_language_defn): Use exp_descriptor_c.
9128 (cplus_language_defn): Likewise.
9129 (asm_language_defn): Likewise.
9130 (minimal_language_defn): Likewise.
9131 (charset_for_string_type): New function.
9132 * c-exp.y (%union): Add 'svec' and 'tsval'.
9134 (exp): Add CHAR production.
9135 (string_exp): Rewrite.
9136 (exp) <string_exp>: Rewrite.
9137 (tempbuf): Now global.
9138 (tempbuf_init): New global.
9139 (parse_string_or_char): New function.
9140 (yylex) <tempbuf>: Now global.
9141 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
9143 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
9144 (c_parse_escape): New function.
9145 * auxv.c (fprint_target_auxv): Update.
9146 * ada-valprint.c (ada_emit_char): Add type argument.
9147 (ada_printchar): Likewise.
9148 (ada_print_scalar): Update.
9149 (printstr): Add type argument. Update calls to ada_emit_char.
9150 (ada_printstr): Add type argument.
9151 (ada_val_print_array): Update.
9152 (ada_val_print_1): Likewise.
9153 * ada-lang.c (emit_char): Add type argument.
9154 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
9156 * gdb_locale.h: Include langinfo.h.
9157 * charset.c (_initialize_charset): Set default host charset from
9158 the locale. Don't register charsets. Add target-wide-charset
9159 commands. Call find_charset_names.
9160 (struct charset, struct translation): Remove.
9161 (GDB_DEFAULT_HOST_CHARSET): Remove.
9162 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
9163 (target_wide_charset_name): New global.
9164 (show_host_charset_name): Handle "auto".
9165 (show_target_wide_charset_name): New function.
9166 (host_charset_enum, target_charset_enum): Remove.
9167 (charset_enum): New global.
9168 (all_charsets, register_charset, lookup_charset, all_translations,
9169 register_translation, lookup_translation): Remove.
9170 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
9171 (iso_8859_print_literally, iso_8859_to_control,
9172 iso_8859_family_charset): Remove.
9173 (ebcdic_print_literally, ebcdic_to_control,
9174 ebcdic_family_charset): Remove.
9175 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
9176 register_iconv_charsets): Remove.
9177 (target_wide_charset_be_name, target_wide_charset_le_name): New
9179 (identity_either_char_to_other): Remove.
9180 (set_be_le_names, validate): New functions.
9181 (backslashable, backslashed, represented): Remove.
9182 (default_c_target_char_has_backslash_escape): Remove.
9183 (default_c_parse_backslash, iconv_convert): Remove.
9184 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
9185 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
9186 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
9187 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
9188 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
9189 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
9190 (table_convert_char, table_translation, simple_table_translation):
9192 (current_host_charset, current_target_charset,
9193 c_target_char_has_backslash_escape_func,
9194 c_target_char_has_backslash_escape_baton): Remove.
9195 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
9196 (host_char_to_target_func, host_char_to_target_baton): Remove.
9197 (target_char_to_host_func, target_char_to_host_baton): Remove.
9198 (cached_iconv_host_to_target, cached_iconv_target_to_host):
9200 (lookup_charset_or_error, check_valid_host_charset): Remove.
9201 (set_host_and_target_charsets): Remove.
9202 (set_host_charset, set_target_charset): Remove.
9203 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
9204 (set_target_wide_charset_sfunc): New function.
9205 (show_charset): Print target wide character set.
9206 (host_charset, target_charset): Rewrite.
9207 (target_wide_charset): New function.
9208 (c_target_char_has_backslash_escape): Remove.
9209 (c_parse_backslash): Remove.
9210 (host_letter_to_control_character): New function.
9211 (host_char_print_literally): Remove.
9212 (host_hex_value): New function.
9213 (target_char_to_control_char): Remove.
9214 (cleanup_iconv): New function.
9215 (convert_between_encodings): New function.
9216 (target_char_to_host): Remove.
9217 (struct wchar_iterator): Define.
9218 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
9219 wchar_push_back): New functions.
9220 (do_cleanup_iterator): New function.
9221 (char_ptr): New typedef.
9222 (charsets): New global.
9223 (add_one, find_charset_names): New functions.
9224 (default_charset_names): New global.
9225 (auto_host_charset_name): Likewise.
9226 * aclocal.m4, config.in, configure: Rebuild.
9227 * configure.ac: Call AM_LANGINFO_CODESET.
9228 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
9229 (AM_ICONV): Invoke earlier.
9230 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
9231 LIBICONV_LIBDIR. Check for libiconv in build tree.
9232 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
9233 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
9234 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
9235 * gdb_obstack.h (obstack_grow_wstr): New define.
9236 * gdb_wchar.h: New file.
9237 * defs.h: Include it.
9239 2009-03-20 Tom Tromey <tromey@redhat.com>
9240 Jan Kratochvil <jan.kratochvil@redhat.com>
9242 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
9243 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
9245 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
9247 * ada-typeprint.c (print_array_type): Do the NULL check
9250 2009-03-19 Tom Tromey <tromey@redhat.com>
9252 * utils.c (do_obstack_free): New function.
9253 (make_cleanup_obstack_free): Likewise.
9254 * defs.h (make_cleanup_obstack_free): Declare.
9256 2009-03-18 Doug Evans <dje@google.com>
9258 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
9259 int, not a long long.
9260 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
9262 * expprint.c (dump_raw_expression): Print note if non-NULL.
9264 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
9267 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
9269 * Makefile.in: Update license to GPLv3.
9270 * ada-exp.y: Update license to GPLv3.
9271 * ada-lex.l: Update license to GPLv3.
9272 * c-exp.y: Update license to GPLv3.
9273 * cp-name-parser.y: Update license to GPLv3.
9274 * darwin-nat-info.c: Update license to GPLv3.
9275 * f-exp.y: Update license to GPLv3.
9276 * gdb_thread_db.h: Update license to GPLv3.
9277 * hppanbsd-nat.c: Update license to GPLv3.
9278 * hppanbsd-tdep.c: Update license to GPLv3.
9279 * hppaobsd-tdep.c: Update license to GPLv3.
9280 * jv-exp.y: Update license to GPLv3.
9281 * m2-exp.y: Update license to GPLv3.
9282 * objc-exp.y: Update license to GPLv3.
9283 * p-exp.y: Update license to GPLv3.
9284 * reply_mig_hack.awk: Update license to GPLv3.
9285 * reverse.c: Update license to GPLv3.
9286 * xtensa-xtregs.c: Update license to GPLv3.
9288 2009-03-18 Pedro Alves <pedro@codesourcery.com>
9290 * remote.c (remote_close): Don't call generic_mourn_inferior.
9291 (remote_mourn_1): Call generic_mourn_inferior after closing the
9294 2009-03-18 Pedro Alves <pedro@codesourcery.com>
9296 * remote.c (remote_start_remote): Add missing call to
9297 init_wait_for_inferior in non-stop mode.
9299 2009-03-18 Pedro Alves <pedro@codesourcery.com>
9301 * breakpoint.c (bpstat_should_step): Only consider software
9302 watchpoints that have a location.
9304 2009-03-17 Joel Brobecker <brobecker@adacore.com>
9306 Add a target_ops parameter to the to_kill method in struct target_ops.
9308 * target.h (struct target_ops): Add a "target_ops *" parameter to
9310 (target_kill): Remove macro. Add declaration.
9311 * target.c (debug_to_kill): Delete, no longer necessary.
9312 (target_kill): New function.
9313 (update_current_target): Stop inheriting the to_kill method.
9314 Do not de_fault it to no_process either.
9315 (setup_target_debug): Do not set current_target.to_kill.
9316 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
9317 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
9318 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
9321 2009-03-17 Doug Evans <dje@google.com>
9323 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
9324 glibc 2.3.2 and earlier.
9326 2009-03-17 Joel Brobecker <brobecker@adacore.com>
9328 * frame.c (get_prev_frame_1): Do not perform the inner_frame
9329 sanity check if this_frame is not NORMAL.
9330 (frame_id_inner): Update the description of this function.
9332 2009-03-17 Hui Zhu <teawater@gmail.com>
9334 * stack.c: Change the introduce of "disassemble-next-line".
9336 2009-03-17 Pedro Alves <pedro@codesourcery.com>
9338 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
9341 2009-03-17 Hui Zhu <teawater@gmail.com>
9343 * stack.c: Include valprint.h.
9344 (disassemble_next_line): New enum.
9345 (show_disassemble_next_line): New function. Show the current
9346 value of disassemble-next-line.
9347 (gdb_disassembly_stub_args): New struct for argument passing
9348 between function do_gdb_disassembly and function
9349 gdb_disassembly_stub.
9350 (gdb_disassembly_stub): New function. Helper for
9352 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
9353 the exception from the gdb_disassembly because it will be
9354 broken by filter sometime.
9355 (print_frame_info): If disassemble-next-line is set to auto
9356 or on and doesn't have the line debug messages for $pc,
9357 output the next instruction.
9358 If disassemble-next-line is set to on and there is line debug
9359 messages, output assembly codes for next line.
9360 (_initialize_stack): Make the "set disassemble-next-line"
9361 command an auto-boolean command. Change its class to
9362 class_stack. Place it in the top level set list. Extend help
9363 to describe the auto mode.
9365 2009-03-17 Pedro Alves <pedro@codesourcery.com>
9367 * infrun.c (normal_stop): Don't overwrite old_chain.
9369 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9371 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
9372 which is undefined, by call to regcache_invalidate, which should
9373 do what the original author wanted to do.
9375 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9377 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
9378 (mips_create_inferior): Likewise.
9380 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9382 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
9384 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9386 * darwin-nat.c (darwin_resume): Fix a compiler warning when
9387 building on x86_64-darwin.
9389 2009-03-16 Tristan Gingold <gingold@adacore.com>
9391 * configure.tgt: Add handling for x86_64-darwin.
9393 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
9395 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
9397 2009-03-15 Joel Brobecker <brobecker@adacore.com>
9399 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
9400 Use the ops parameter to get to the target beneath, rather than
9401 using the current_target global. Using the current_target global
9402 was an unintended accident.
9404 2009-03-15 Joel Brobecker <brobecker@adacore.com>
9406 Fix an error happening while loading symbols from a core file
9409 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
9410 to detect whether we're debugging a core file or not.
9412 2009-03-15 Joel Brobecker <brobecker@adacore.com>
9414 Modernize the aix-thread later by getting rid of the base_target
9415 global. This brings back to life the AIX port which was otherwise
9416 crashing all the time.
9418 * aix-thread.c (base_target): Delete.
9419 (pd_enable): Do not set base_target.
9420 (aix_thread_attach): Use find_target_beneath instead of base_target.
9421 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
9422 (aix_thread_fetch_registers, aix_thread_store_registers),
9423 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
9424 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
9425 (aix_thread_kill): Delete. Does not seem necessary.
9426 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
9428 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
9430 * stack.c (return_command <retval_exp>): New variables retval_expr
9431 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
9432 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
9433 if RETURN_TYPE is NULL.
9435 2009-03-14 Pedro Alves <pedro@codesourcery.com>
9437 * remote.c (PACKET_qAttached): New.
9438 (remote_query_attached): New.
9439 (remote_add_inferior): Add new `attached' argument. Handle it.
9440 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
9441 -1 to remote_add_inferior in new parameter.
9442 (extended_remote_attach_1): Adjust to pass 1 to
9443 remote_add_inferior in the new parameter.
9444 (extended_remote_create_inferior_1): Adjust to pass 0 to
9445 remote_add_inferior in the new parameter.
9446 (_initialize_remote): Add "set/show remote query-attached-packet"
9449 2009-03-13 Tom Tromey <tromey@redhat.com>
9451 * symtab.c (lookup_symbol_in_language): Use a cleanup.
9453 2009-03-13 Doug Evans <dje@google.com>
9455 * exceptions.h: Clean up some comments on catch_exceptions usage.
9456 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
9459 2009-02-17 Joel Brobecker <brobecker@adacore.com>
9461 The following patch helps getting rid of a warning inside solib-som.c.
9463 * source.c (source_full_path_of): Constify parameter filename.
9464 * defs.h (source_full_path_of): Update declaration accordingly.
9466 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9468 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
9469 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
9470 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
9472 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9474 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
9475 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
9477 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9479 * ada-tasks.c (ada_task_is_alive): Move up and make static.
9480 * ada-lang.h (ada_task_is_alive): Remove declaration.
9482 2009-03-12 Jerome Guitton <guitton@adacore.com>
9484 * ada-lang.c (ada_delta): Change the type of numerators and
9485 denominators to DOUBLEST, as they may not fit into a long.
9486 (scaling_factor): Ditto.
9488 2009-03-12 Jerome Guitton <guitton@adacore.com>
9490 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
9492 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9494 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
9495 types, if we are unable to determine the actual symbol type
9496 from its tag, then use the static approximation instead.
9498 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9500 Fix crash printing packed record with packed array.
9502 * ada-lang.c (ada_modulus_from_name): New function.
9503 (ada_modulus): In the case where the type length is bigger than
9504 the size of the type used to hold the bounds, try determining
9505 the modulus from the type name.
9506 (ada_value_primitive_packed_val): Fix bug in the computation of
9507 ntarg causing an out-of-buffer invalid access.
9509 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9511 Fix segfault when printing short_integer'last.
9513 * ada-lang.c (ada_find_any_type): Search in the primitive types
9514 if a symbol could not be found.
9516 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9518 * ada-tasks.c (task_states,long_task_states): Add new states
9519 Activating and Acceptor_Delay_Sleep. Update the description
9520 of state Acceptor_Sleep.
9522 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
9524 Fix a build failure on Darwin following some changes in
9525 the profile of some target_ops methods.
9527 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
9529 (darwin_stop_inferior, darwin_detach): Likewise.
9531 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
9533 Include token in ^running notification for CLI commands.
9535 * mi/mi-main.c (mi_execute_command): Set current_token here.
9536 (mi_cmd_execute): Do not set current_token here.
9538 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
9542 * mi/mi-main.c (mi_print_timing_maybe): New.
9543 (captured_mi_execute_command): Simplify. Output timings to
9545 (mi_execute_async_cli_command): Do not print timings.
9546 * mi/mi-main.h (mi_print_timing_maybe): Declare.
9547 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
9549 2009-03-12 Jerome Guitton <guitton@adacore.com>
9551 * xcoffread.c (process_linenos): Check if the line in the
9552 include table refers to the main source file and, if so,
9553 add them to the main subfile.
9555 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9557 Fix a build failure on AIX introduced after a change in the profile
9558 of some of the "methods" in the target_ops structure.
9559 * aix-thread.c: Add missing target_ops parameter throughout.
9561 Implement Ada task switching on AIX.
9562 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
9563 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
9565 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
9567 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
9568 value_mark and value_free_to_mark.
9569 * objfiles.c (free_objfile): Call objfile_free_data before
9572 2009-03-10 Hui Zhu <teawater@gmail.com>
9574 * disasm.c (gdb_disassembly): Remove unused argument
9576 * disasm.h (gdb_disassembly): Ditto.
9577 * cli/cli-cmds.c (print_disassembly): Ditto.
9578 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
9580 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
9582 * solib.c (solib_contains_address_p): New function.
9583 (solib_name_from_address): Use it.
9584 * printcmd.c (display_uses_solib_p): Use it.
9585 * solib.h (solib_contains_address_p): Declare it.
9587 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
9589 * varobj.c (free_variable): Call value_free.
9591 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
9594 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
9595 Move the variable `macinfo_type' out of the loop. Create a new
9596 processing pass before the current one to pre-create `current_file'.
9597 New complaint on misplaced zero/non-zero definitions/includes.
9598 Skip first DW_MACINFO_start_file with `at_commandline' set.
9600 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
9602 * solib.c (reload_shared_libraries): Give
9603 inferior a chance to reset solib breakpoint.
9606 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
9608 * windows-nat.c (dr): Redefine to use largest possible integer which
9610 (cygwin_set_dr): Avoid coercion.
9612 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
9614 * windows-nat.c (windows_create_inferior): Implement --tty handling on
9617 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
9619 Rename solib_address to solib_name_from_address.
9620 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
9621 (disable_breakpoints_in_unloaded_shlib): Update.
9622 * printcmd.c (display_uses_solib_p): Likewise.
9623 * stack.c (print_frame): Likewise.
9627 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
9629 * printcmd.c (do_one_display): Reparse exp_string.
9630 (display_uses_solib_p): New function.
9631 (clear_dangling_display_expressions): New function.
9632 (_initialize_printcmd): Add observer.
9633 * solib.c (no_shared_libraries): Swap order of calls to
9634 clear_solib and objfile_purge_solibs.
9636 2009-03-05 Joel Brobecker <brobecker@adacore.com>
9638 Implement the target-specific part of Ada tasking support
9641 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
9642 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
9644 2009-03-05 Joel Brobecker <brobecker@adacore.com>
9646 Get rid of the global "base_target" and use "find_target_beneath"
9647 to find the underlying target.
9648 * dec-thread.c (base_target): Delete.
9649 (enable_dec_thread): Remove assignement to base_target.
9650 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
9651 (dec_thread_fetch_registers, dec_thread_store_registers)
9652 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
9653 Update the function profile if necessary.
9654 Use find_target_beneath to call the same method but from
9655 the underlying target, removing the need for "base_target".
9657 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
9658 Fix a copy/paste error in a few debug traces...
9660 * solib-osf.c (init_so): Use a simpler method for computing
9661 the size of lm_info structure. This also gets rid of warning
9662 emitted by the compiler.
9664 2009-03-05 Pedro Alves <pedro@codesourcery.com>
9666 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
9667 duplicates of permanent breakpoints.
9669 2009-03-04 Pedro Alves <pedro@codesourcery.com>
9671 * inferior.h (notice_new_inferior): Declare.
9672 * infcmd.c (notice_new_inferior): New.
9673 * remote.c (remote_add_inferior, remote_add_thread): New.
9674 (notice_new_inferiors): Rename to...
9675 (remote_notice_new_inferior): ... this. Add RUNNING argument.
9676 Use remote_add_thread instead of add_thread, passing it the
9677 RUNNING argument. Add an inferior with remote_add_inferior. If
9678 we just learned about an inferior, call notice_new_inferior.
9679 (record_currthread): Adjust.
9680 (remote_threads_info): Adjust to use remote_notice_new_inferior.
9681 (remote_start_remote, extended_remote_attach_1): Use
9682 remote_add_inferior.
9683 (process_stop_reply): Adjust. Call remote_notice_new_inferior
9684 after handling expedited registers and watchpoint state.
9685 (extended_remote_create_inferior_1): Use remote_add_inferior.
9687 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
9689 * infcmd.c (registers_info): Remove register number case.
9691 2009-03-03 Pedro Alves <pedro@codesourcery.com>
9693 * top.c (quit_target): Check for target_has_execution before
9694 killing or detaching from inferiors.
9696 2009-03-02 Joel Brobecker <brobecker@adacore.com>
9698 Remove some unused routines.
9700 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
9702 * ada-lang.c (ada_task_list_iterator_ftype)
9703 (iterate_over_live_ada_tasks): Delete.
9704 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
9707 2009-03-01 Doug Evans <dje@google.com>
9709 * symtab.c: Remove trailing whitespace throughout the file.
9710 (expand_line_sal): Fix some typos and whitespace.
9712 * Makefile.in (clean): rm -f $(DEPDIR)/*.
9714 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
9715 (init.c): signals/ -> common/.
9716 (signals.o): Update.
9717 * target.h (target_signal_to_string,target_signal_to_string)
9718 (target_signal_from_name,target_signal_to_host_p)
9719 (target_signal_from_host,target_signal_to_host): Move to ...
9720 * common/gdb_signals.h: ... here. New file.
9721 * common/signals.c: Moved here from signals/signals.c.
9722 #include gdb_signals.h, remove #include of target.h in gdb case.
9723 (target_signal_from_command,default_target_signal_to_host)
9724 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
9726 Include thread ID in target_wait debugging output.
9727 * infrun.c (print_target_wait_results): New function.
9728 (wait_for_inferior,fetch_inferior_event): Call it.
9730 2009-02-27 Pedro Alves <pedro@codesourcery.com>
9732 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
9733 with a ptid_t field.
9734 * linux-thread-db.c (thread_get_info_callback): Build the ptid
9735 using the pid stored in proc_handle.ptid.
9736 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
9737 (check_for_thread_db, thread_db_detach, check_event)
9738 (thread_db_mourn_inferior, find_new_threads_callback)
9739 (thread_db_find_new_threads_1): Adjust.
9740 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
9741 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
9743 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
9745 * valprint.c (read_string): Rework clean-up logic. Use
9746 free_current_contents to clean-up buffer.
9748 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
9750 * MAINTAINERS: Update e-mail address.
9752 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
9754 * python/python-utils.c (python_string_to_unicode): Always return
9756 (python_string_to_target_string): Decrement transient python
9758 (python_string_to_host_string): Likewise.
9760 2007-02-26 Pedro Alves <pedro@codesourcery.com>
9762 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
9763 call to super_fetch_registers.
9764 (mips64_linux_store_registers): Pass `ops' to call to
9765 super_store_registers.
9767 2009-02-25 Doug Evans <dje@google.com>
9769 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
9772 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
9773 disabled_shlib_breaks, unused.
9775 * printcmd.c (build_address_symbolic): Fix comment.
9777 2009-02-25 Hui Zhu <teawater@gmail.com>
9779 * cli/cli-script.c (define_command): Add _() to query.
9780 * gnu-nat.c (inf_validate_task_sc): Ditto.
9781 * infcmd.c (kill_if_already_running): Ditto.
9782 (jump_command): Ditto.
9783 (attach_command): Ditto.
9784 * inflow.c (kill_command): Ditto.
9785 * infrun.c (handle_command): Ditto.
9786 * maint.c (maintenance_dump_me): Ditto.
9787 * memattr.c (mem_delete_command): Ditto.
9788 * monitor.c (monitor_interrupt_query): Ditto.
9789 * nto-procfs.c (interrupt_query): Ditto.
9790 * printcmd.c (undisplay_command): Ditto.
9791 * remote-mips.c (mips_kill): Ditto.
9792 * remote.c (interrupt_query): Ditto.
9793 * solib-irix.c (irix_open_symbol_file_object): Ditto.
9794 * solib-osf.c (osf_open_symbol_file_object): Ditto.
9795 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
9796 * solib-som.c (som_open_symbol_file_object): Ditto.
9797 * solib-svr4.c (open_symbol_file_object): Ditto.
9798 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
9799 * target.c (kill_or_be_killed): Ditto.
9800 * tracepoint.c (delete_trace_command): Ditto.
9801 * top.c (quit_confirm): Add _() to s that will be used
9804 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
9806 Fix windows-nat.c compilation failure.
9808 * windows-nat.c (windows_thread_alive): Fix forward declaration.
9809 (get_windows_debug_event): Add ops parameter to call to windows_resume.
9811 2009-02-23 Pedro Alves <pedro@codesourcery.com>
9813 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
9815 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
9817 * symtab.c (find_line_symtab): Initialize exact to avoid
9820 2009-02-23 Pedro Alves <pedro@codesourcery.com>
9822 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
9823 `ops' to recursive call.
9825 2009-02-23 Pedro Alves <pedro@codesourcery.com>
9827 * corelow.c (get_core_registers): Adjust.
9828 (core_file_thread_alive): Rename to...
9829 (core_thread_alive): ... this.
9830 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
9831 (init_core_ops): Adjust.
9832 (coreops_suppress_target): Delete.
9833 (_initialize_corelow): Unconditionally add core_ops.
9834 * procfs.c: Include "inf-child.h".
9835 (procfs_ops): Delete.
9836 (init_procfs_ops): Delete. Reimplement as...
9837 (procfs_target): ... this, inheriting from inf-child.
9838 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
9839 (procfs_prepare_to_store): Delete.
9840 (procfs_store_registers, procfs_resume): Adjust.
9841 (procfs_open): Delete.
9842 (procfs_suppress_run): Delete.
9843 (procfs_can_run): Delete.
9844 (procfs_mourn_inferior): Adjust.
9845 (procfs_init_inferior): Add target_ops parameter. Adjust.
9846 (procfs_create_inferior): Don't pass procfs_init_inferior to
9847 fork_inferior. Instead call it after fork_inferior returns.
9848 (procfs_find_new_threads): Adjust.
9849 (_initialize_procfs): Adjust to use procfs_target instead of
9851 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
9852 (lwp_to_thread): Use target_thread_alive.
9853 (sol_thread_open): Delete.
9854 (sol_thread_attach): Delete.
9855 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
9856 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
9857 to use find_target_beneath.
9858 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
9859 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
9860 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
9861 (check_for_thread_db): New.
9862 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
9863 (sol_thread_new_objfile): Call check_for_thread_db.
9864 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
9865 (sol_thread_can_run): Delete.
9866 (sol_thread_alive): Adjust to use find_target_beneath.
9867 (sol_thread_stop): Delete.
9868 (rw_common): Use target_write_memory or target_read_memory.
9869 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
9870 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
9871 (solaris_pid_to_str): Remove check for libthread_db initialization
9873 (sol_find_new_threads): Remove check for libthread_db
9874 initialization failing, or for an invalid inferior_ptid. Adjust
9875 to use find_target_beneath.
9876 (sol_core_open, sol_core_close, sol_core_detach,
9877 sol_core_files_info, sol_find_memory_regions,
9878 sol_make_note_section, ignore): Delete.
9879 (init_sol_thread_ops): Make it a thread_stratum target. Remove
9880 unneeded callback settings.
9881 (init_sol_core_ops): Delete.
9882 (_initialize_sol_thread): No longer call init_sol_core_ops, set
9883 procfs_suppress_run, or hack with core_ops.
9885 * target.h (struct target_ops): Add a target_ops * parameter to
9886 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
9887 and to_find_new_threads.
9888 (target_fetch_registers, target_store_registers)
9889 (target_thread_alive, target_find_new_threads): Redeclare as
9892 * target.c (update_current_target): Do not inherit or de_fault
9893 to_resume, to_fetch_registers, to_store_registers,
9894 to_thread_alive, to_find_new_threads.
9895 (target_resume): Adjust.
9896 (target_thread_alive, target_find_new_threads): New.
9897 (debug_to_resume, debug_to_fetch_registers): Delete.
9898 (target_fetch_registers): New.
9899 (debug_to_store_registers): Delete.
9900 (target_store_registers): New.
9901 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
9902 (setup_target_debug): Adjust.
9904 * gdbcore.h (core_ops): Delete declaration.
9906 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
9907 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
9908 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
9909 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
9910 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
9911 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
9912 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
9913 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
9914 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
9915 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
9916 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
9917 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
9918 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
9919 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
9921 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
9922 * gdbarch.h, gdbarch.c: Regenerate.
9924 * sol2-tdep.c: Include "inferior.h".
9925 (sol2_core_pid_to_str): New.
9926 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
9928 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
9929 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
9930 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
9931 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
9933 2009-02-22 Doug Evans <dje@google.com>
9935 * exec.c (exec_file_attach): Fix comment.
9937 2009-02-22 Pedro Alves <pedro@codesourcery.com>
9939 Silence a few -Wmissing-prototypes warnings.
9942 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
9944 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
9945 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
9946 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
9947 (_initialize_amd64nbsd_tdep): ... this.
9948 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
9949 (_initialize_arm_linux_tdep): Declare.
9950 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
9951 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
9952 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
9953 * avr-tdep.c (avr_return_value): Make it static.
9954 (avr_frame_unwind_cache): Ditto.
9955 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
9956 (bsd_uthread_solib_loaded): Ditto.
9957 (bsd_uthread_solib_unloaded): Ditto.
9958 (bsd_uthread_target): Ditto.
9959 (_initialize_bsd_uthread): Declare.
9960 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
9961 (cris_frame_unwind_cache): Ditto.
9962 * frv-tdep.c (frv_return_value): Ditto.
9963 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
9964 (h8300h_use_struct_convention): Ditto.
9965 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
9967 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
9969 * hppabsd-tdep.c: Include hppabsd-tdep.h.
9970 (hppabsd_find_global_pointer): Make it static.
9971 * hppabsd-tdep.h: New.
9972 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
9973 (hppabsd_init_abi): Remove declaration.
9974 (_initialize_hppabsd_tdep): Remove declaration.
9975 (_initialize_hppanbsd_tdep): Declare.
9976 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
9977 (hppabsd_init_abi): Delete declaration.
9978 (hppaobsd_init_abi): Make it static.
9979 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
9980 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
9981 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
9982 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
9983 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
9984 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
9985 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
9986 (_initialize_m32c_tdep): Declare.
9987 * m32r-rom.c (_initialize_m32r_rom): Declare.
9988 * m32r-tdep.c (m32r_skip_prologue): Make it static.
9989 (m32r_return_value): Ditto.
9990 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
9991 (m68hc11_return_value): Ditto.
9992 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
9993 * m88k-tdep.c (m88k_frame_cache): Make it static.
9994 * mep-tdep.c (mep_gdb_print_insn): Ditto.
9995 (mep_return_value): Ditto.
9996 (_initialize_mep_tdep): Declare.
9997 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
9998 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
9999 (mips_linux_syscall_next_pc): Ditto.
10000 (_initialize_mips_linux_tdep): Declare.
10001 * mips-tdep.c (mips_single_step_through_delay): Make it static.
10002 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
10003 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
10004 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
10005 * mt-tdep.c (_initialize_mt_tdep): Declare.
10006 * nbsd-tdep.c: Include nbsd-tdep.h.
10007 * nto-tdep.c (find_load_phdr): Make it static.
10008 (_initialize_nto_tdep): Declare.
10009 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
10011 (_initialize_ppc_linux_tdep): Declare.
10012 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
10013 (m32r_insert_watchpoint, m32r_remove_watchpoint)
10014 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
10016 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
10017 * rs6000-nat.c: Include xcoffread.h.
10018 (find_toc_address): Don't extern declare get_toc_offset. Adjust
10019 to call xcoff_get_to_offset.
10020 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
10021 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
10022 (rs6000_skip_trampoline_code): Make static.
10023 * s390-tdep.c (s390_regset_from_core_section): Ditto.
10024 * sh-tdep.c (sh_register_reggroup_p): Ditto.
10025 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
10026 (_initialize_shnbsd_tdep): Declare.
10027 * solib-frv.c (displacement_from_map): Make static.
10028 (_initialize_frv_solib): Declare.
10029 * solib-irix.c (fetch_lm_info): Make static.
10030 (_initialize_irix_solib): Declare.
10031 * solib-som.c: Include solib-som.h.
10032 (som_solib_select): Line break.
10033 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
10034 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
10035 (_initialize_sparcnbsd_tdep): ... this.
10036 * spu-tdep.c (spu_software_single_step): Make it static.
10037 (_initialize_spu_tdep): Declare.
10038 * vax-tdep.c (vax_frame_cache): Make it static.
10039 * xcoffread.c: Include xcoffread.h.
10040 (get_toc_offset): Rename to ...
10041 (xcoff_get_toc_offset): ... this.
10042 (_initialize_xcoffread): Declare.
10043 * xcoffread.h: New.
10044 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
10045 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
10047 (_initialize_xtensa_tdep): Declare.
10049 2008-02-21 Pedro Alves <pedro@codesorcery.com>
10051 Silence a few -Wmissing-prototypes warnings.
10054 * amd64-nat.c: Include "amd64-nat.h".
10055 * fork-child.c (_initialize_fork_child): Ditto.
10056 * gcore.c (_initialize_gcore): Ditto.
10057 * inf-ptrace.c: Include "inf-ptrace.h".
10058 (inf_ptrace_store_registers): Make it static.
10059 * linux-nat.c (linux_nat_terminal_ours): Make it static.
10060 (_initialize_linux_nat): Declare before definition.
10061 * linux-tdep.c: Include "linux-tdep.h".
10062 * linux-thread-db.c (_initialize_thread_db): Declare before
10064 * proc-service.c (_initialize_proc_service): Ditto.
10065 * remote.c (remote_send_printf): Make it static.
10066 * solib.c: Include "solib.h".
10067 * symfile-mem.c (_initialize_symfile_mem): Declare before
10069 * ada-lang.c (ada_la_decode, ada_match_name)
10070 (ada_suppress_symbol_printing, ada_is_array_type)
10071 (ada_value_ptr_subscript, ada_array_length)
10072 (ada_to_static_fixed_value): Make them static.
10073 (_initialize_ada_language): Declare before definition.
10074 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
10075 (ada_task_list_changed, ada_new_objfile_observer): Make them
10077 (_initialize_tasks): Declare before definition.
10078 * addrmap.c (_initialize_addrmap): Declare before definition.
10079 * auxv.c (default_auxv_parse): Make it static.
10080 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
10082 * breakpoint.c (remove_sal): Add line break.
10083 (expand_line_sal_maybe): Make it static.
10084 * cp-name-parser.y: Include "cp-support.h".
10085 * cp-valprint.c (cp_find_class_member): Make it static.
10086 * eval.c (value_f90_subarray): Ditto.
10087 * exceptions.c (print_any_exception): Ditto.
10088 * findcmd.c (_initialize_mem_search): Declare before definition.
10089 * frame.c (frame_observer_target_changed): Make it static.
10090 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
10091 * inf-child.c: Include "inf-child.h".
10092 * inferior.h (valid_inferior_id): Rename to ...
10093 (valid_gdb_inferior_id): ... this.
10094 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
10096 * jv-lang.c (java_language_arch_info): Make it static.
10097 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
10098 * osdata.c (info_osdata_command): Make it static.
10099 * regcache.c (regcache_observer_target_changed): Make it static.
10100 * reverse.c (_initialize_reverse): Declare before definition.
10101 * stabsread.c (cleanup_undefined_types_noname)
10102 (cleanup_undefined_types_1): Make them static.
10103 * symfile.c (place_section): Make it static.
10104 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
10105 * target-descriptions.c (_initialize_target_descriptions): Declare
10107 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
10108 (find_default_is_async_p, find_default_supports_non_stop): Make
10110 (target_supports_non_stop): Add prototype.
10111 (dummy_pid_to_str): Make it static.
10112 * utils.c (_initialize_utils): Declare before definition.
10113 * ada-exp.y (_initialize_ada_exp): Declare before definition.
10114 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
10115 * target.h (struct target_ops): Add a prototype to the
10116 to_can_execute_reverse callback.
10117 * macroscope.c (_initialize_macroscope): Declare before definition.
10118 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
10119 * python/python.c (_initialize_python): Declare before definition.
10120 * tui/tui-command.c: Include "tui/tui-command.h".
10121 * tui/tui-data.c (init_content_element, init_win_info): Make them
10123 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
10124 * tui/tui-interp.c (_initialize_tui_interp): Declare before
10126 * tui/tui-layout.c: Include "tui/tui-layout.h".
10127 (_initialize_tui_layout): Declare before definition.
10128 * tui/tui-regs.c: Include "tui/tui-regs.h".
10129 (tui_display_reg_element_at_line): Make it static.
10130 (_initialize_tui_regs): Declare before definition.
10131 * tui/tui-stack.c (_initialize_tui_stack): Declare before
10133 * tui/tui-win.c: Include "tui/tui-win.h".
10134 (_initialize_tui_win): Declare before definition.
10135 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
10136 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
10137 (tui_get_cmd_list): Add a prototype.
10138 * tui/tui-windata.c: Include tui-windata.h.
10139 * tui/tui-wingeneral.c (box_win): Make it static.
10140 * cli/cli-logging.c (show_logging_command): Make it static.
10141 (_initialize_cli_logging): Declare before definition.
10142 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
10145 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
10147 Extend use of i386_use_watchpoints to all i386 native files
10148 using hardware watchpoints.
10149 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
10150 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
10151 * windows-nat.c (init_windows_ops): Ditto.
10152 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
10153 * config/i386/nm-cygwin64.h: Ditto.
10154 * config/i386/nm-fbsd.h: Ditto.
10155 * config/i386/nm-go32.h: Ditto.
10157 2009-02-19 Joel Brobecker <brobecker@adacore.com>
10159 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
10161 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
10163 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
10164 (mi_interpreter_init): Register the above.
10165 * solib.c (clear_solib): Notify solib unload.
10166 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
10167 disable breakpoints on a.out targets.
10169 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
10171 * observer.c (observer_test_first_notification_function)
10172 (observer_test_second_notification_function)
10173 (observer_test_third_notification_function): Adjust prototype.
10175 2009-02-17 Pedro Alves <pedro@codesourcery.com>
10177 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
10178 (ALL_TARGET_OBS): Add dicos-tdep.o.
10179 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
10180 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
10182 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
10184 * dicos-tdep.h, dicos-tdep.c: New.
10185 * amd64-dicos-tdep.c: New.
10186 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
10187 inferior.h. Include dicos-tdep.h.
10188 (i386_dicos_init_abi): Call dicos_init_abi.
10189 (i386_dicos_bfd_has_symbol_p): Delete.
10190 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
10192 * NEWS: Mention x86-64 DICOS target support.
10194 2009-02-16 Doug Evans <dje@google.com>
10196 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
10197 All callers updated.
10198 (amd64_get_insn_details): Handle more 3-byte opcode insns.
10199 (amd64_breakpoint_p): Delete.
10200 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
10201 don't back up pc to the start of the int3.
10202 * i386-tdep.c: #include opcode/i386.h.
10203 (i386_skip_prefixes): New function.
10204 (i386_absolute_jmp_p): Constify argument.
10205 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
10206 (i386_breakpoint_p): Delete.
10207 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
10208 When fixing up after stepping an int3, don't back up pc to the start
10211 2009-02-16 Pedro Alves <pedro@codesourcery.com>
10213 * corelow.c (core_close): Don't hardcode the core's pid.
10214 (core_open): Find core threads before calling
10215 post_create_inferior.
10216 (add_to_thread_list, get_core_register_section): Take into account
10217 systems where the regset section names encode the pid of the
10220 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
10221 * gdbarch.h, gdbarch.c: Regenerate.
10223 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
10224 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
10225 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
10226 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
10228 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
10230 Include frame information for *stopped due to CLI commands.
10232 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
10233 * infcmd.c (finish_command_continuation): Pass '1' for
10234 'print_frame' parameter to the observer.
10235 * infrun.c (normal_stop): Don't print mi-specific information
10236 here. Pass 'stop_print_frame' to the 'print_frame' parameter
10238 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
10239 If we need to print frame, and current uiout is not the MI one,
10242 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
10244 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
10245 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
10247 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
10250 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
10251 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
10253 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
10255 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
10256 for DW_ATE_signed_char and DW_ATE_unsigned_char
10257 for pascal language.
10259 2009-02-11 Jim Meyering <meyering@redhat.com>
10260 Jan Kratochvil <jan.kratochvil@redhat.com>
10262 Avoid NULL dereference.
10263 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
10264 New variable func_type.
10266 2009-02-11 Pedro Alves <pedro@codesourcery.com>
10268 * gdbarch.c: Regenerate.
10270 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
10272 * p-lang.c (is_pascal_string_type): Fix comment.
10273 Determine exact size of char elements for GPC
10275 (pascal_printstr): Handle char width of 2 or 4.
10276 * p-valprint.c (pascal_val_print): Handle char
10279 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
10281 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
10282 inside the loop. Only call addrmap_set_empty if the compilation unit
10283 had DW_AT_high_pc and DW_AT_low_pc. Update call to
10284 scan_partial_symbols.
10285 (scan_partial_symbols): Take NEED_PC argument and pass it along with
10287 (add_partial_namespace): Take NEED_PC argument and pass it through.
10288 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
10291 2009-02-07 Pedro Alves <pedro@codesourcery.com>
10293 * NEWS: Mention inspecting extra signal information, $_siginfo,
10294 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
10296 2009-02-07 Pedro Alves <pedro@codesourcery.com>
10298 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
10301 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10303 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
10304 (compat_timer_t, compat_clock_t, struct compat_timeval)
10305 (compat_sigval_t, compat_siginfo_t): New types.
10306 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
10307 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
10308 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
10309 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
10310 (amd64_linux_siginfo_fixup): New.
10311 * linux-nat.c (linux_nat_siginfo_fixup): New.
10312 (siginfo_fixup): New.
10313 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
10314 siginfo layout expected by ptrace and the siginfo layout of the
10316 (linux_nat_set_siginfo_fixup): New.
10317 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
10319 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10321 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
10322 * infrun.c (siginfo_value_read, siginfo_value_write): New.
10323 (siginfo_value_funcs): New.
10324 (siginfo_make_value): New.
10325 (_initialize_infrun): Create the $_siginfo convenience variable.
10326 * gdbtypes.h (append_composite_type_field_aligned): Declare.
10327 * gdbtypes.c (append_composite_type_field): Rename to...
10328 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
10329 argument. Handle it.
10330 (append_composite_type_field): Rewrite on top of
10331 append_composite_type_field_aligned.
10332 * value.h (internalvar_make_value): New typedef.
10333 (struct internalvar) <make_value>: New field.
10334 (create_internalvar_type_lazy): Declare.
10335 * value.c (create_internalvar): Clear make_value.
10336 (create_internalvar_type_lazy): New.
10337 (value_of_internalvar): If make_value is set use it.
10338 (preserve_values): Skip internal variables that don't have a
10340 * gdbarch.sh (get_siginfo_type): New.
10341 * gdbarch.h, gdbarch.c: Regenerate.
10343 * linux-tdep.h, linux-tdep.c: New.
10344 * amd64-linux-tdep.c: Include "linux-tdep.h".
10345 (amd64_linux_init_abi): Register linux_get_siginfo_type and
10346 linux_get_siginfo_mapper.
10347 * i386-linux-tdep.c: Include "linux-tdep.h".
10348 (i386_linux_init_abi): Register linux_get_siginfo_type and
10349 linux_get_siginfo_mapper.
10350 * arm-linux-tdep.c: Include "linux-tdep.h".
10351 (i386_linux_init_abi): Register linux_get_siginfo_type and
10352 linux_get_siginfo_mapper.
10354 * linux-nat.c (linux_xfer_siginfo): New.
10355 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
10356 * remote.c (PACKET_qXfer_siginfo_read)
10357 (PACKET_qXfer_siginfo_write): New.
10358 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
10359 "qXfer:siginfo:write" features.
10360 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
10361 (_initialize_remote): Add "set/show remote read-siginfo-object"
10362 and "set/show remote write-siginfo-object" commands.
10364 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
10365 (HFILES_NO_SRCDIR): Add linux-tdep.h.
10366 (ALLDEPFILES): Add linux-tdep.c.
10368 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
10369 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
10372 2009-02-06 Jim Blandy <jimb@codesourcery.com>
10373 Daniel Jacobowitz <dan@codesourcery.com>
10374 Vladimir Prus <vladimir@codesourcery.com>
10375 Pedro Alves <pedro@codesourcery.com>
10377 * defs.h (enum lval_type): New value: lval_computed.
10378 * value.h (struct lval_funcs): New type.
10379 (allocate_computed_value, value_computed_funcs)
10380 (value_computed_closure): New declarations.
10381 * value.c (struct value): Add a structure to the location union
10382 for computed lvalues, containing 'funcs' and 'closure' members.
10383 (allocate_computed_value, value_computed_funcs)
10384 (value_computed_closure): New functions.
10385 (value_free): For computed lvalues, call the closure's
10386 'free_closure' function before freeing the value itself.
10387 (value_copy): If we're copying an lval_computed value, call the
10388 closure's 'copy_closure' function.
10389 (set_value_component_location): If the original value is a
10390 computed lvalue, then call the closure's 'copy_closure' function.
10391 (value_of_internalvar): If an internal variable's value is a
10392 computed lvalue, make retrieving its value produce an equivalent
10394 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
10395 their read function.
10396 (value_assign): Assign to computed lvalues by calling their write
10399 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10401 * linux-nat.c (linux_nat_wait): Adjust.
10402 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
10403 * linux-nat.h (thread_db_init): Delete declaration.
10404 * linux-thread-db.c (target_beneath): Delete.
10405 (thread_db_init): Delete.
10406 (thread_db_detach): Use find_target_beneath.
10407 (thread_db_wait): Adjust interface. Use find_target_beneath.
10408 (thread_db_mourn_inferior): Use find_target_beneath.
10409 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
10410 (thread_db_async_mask): Delete.
10411 (thread_db_pid_to_str): Adjust interface. Use
10412 find_target_beneath.
10413 (thread_db_get_thread_local_address): Adjust interface. Use
10414 find_target_beneath.
10415 (init_thread_db_ops): Delete references to delete functions.
10416 * target.c (update_current_target): Don't inherit or default
10417 to_wait. Don't inherit to_pid_to_str and
10418 to_get_thread_local_address.
10419 (target_translate_tls_address): Look for a pushed target that
10420 implements to_get_thread_local_address, and use it instead of
10421 checking for target_get_thread_local_address_p.
10422 (target_wait, target_pid_to_str): Reimplement as functions.
10423 (dummy_pid_to_str): New.
10424 (init_dummy_target): Register it.
10425 (debug_to_wait): Delete.
10426 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
10427 to_get_thread_local_address accept a pointer to struct target_ops.
10428 (target_wait): Delete macro, and declare as function.
10429 (target_pid_to_str): Likewise.
10430 (target_get_thread_local_address)
10431 (target_get_thread_local_address_p): Delete.
10432 (noprocess): Add NORETURN and ATTR_NORETURN tags.
10433 * inf-ptrace.c (inf_ptrace_wait): Adjust.
10434 (inf_ptrace_pid_to_str): New.
10435 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
10436 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
10437 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
10438 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
10440 * corelow.c (core_pid_to_str): Adjust.
10441 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
10442 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
10443 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
10444 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
10445 * hpux-thread.c (hpux_thread_wait): Adjust.
10446 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
10447 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
10448 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
10449 * procfs.c (procfs_pid_to_str): Adjust.
10450 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
10451 * remote-mips.c (mips_wait): Adjust.
10452 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
10453 * remote.c (remote_wait, remote_pid_to_str)
10454 (remote_get_thread_local_address): Adjust.
10455 * rs6000-nat.c (rs6000_wait): Adjust.
10456 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
10457 (sol_thread_wait, solaris_pid_to_str): Adjust.
10458 * spu-linux-nat.c (spu_child_wait): Adjust.
10459 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
10461 2009-02-06 Tom Tromey <tromey@redhat.com>
10463 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
10464 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
10465 (python-cmd.o): New target.
10466 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
10467 completer prototype.
10468 (add_cmd): Initialize destroyer member of cmd_list_element. Use
10469 make_symbol_completion_list_fn as completer.
10470 (delete_cmd): Call destroyer if one is set.
10471 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
10472 completer member. Add destroyer member.
10473 (set_cmd_completer): Add self parameter to
10474 completer prototype.
10475 * command.h (set_cmd_completer): Add cmd parameter to
10476 completer prototype.
10477 * completer.c (noop_completer, filename_completer,
10478 location_completer, expression_completer, command_completer): Adapt
10479 to new completer prototype.
10480 (complete_line_internal): Pass new parameter to completer function.
10481 * completer.h (noop_completer, filename_completer,
10482 location_completer, expression_completer, command_completer): Adapt
10483 prototypes to new completer prototype.
10484 * interps.c (interpreter_completer): Adapt to new completer
10486 * python/python-cmd.c: New file.
10487 * python/python-internal.h (gdbpy_initialize_commands): Add
10489 (gdbpy_doc_cst): Add forward declaration.
10490 * python/python.c (gdbpy_doc_cst): Declare.
10491 (_initialize_python): Call gdbpy_initialize_commands. Initialize
10493 * symtab.c (make_symbol_completion_list_fn): New function.
10494 * symtab.h (make_symbol_completion_list_fn): Add prototype.
10496 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10498 * target.c (target_get_osdata): Check for equal or higher than
10499 process_stratum, not dummy_stratum.
10501 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10503 * remote.c (extended_remote_can_run): Delete.
10504 (init_remote_ops): Don't register it.
10505 * target.c (target_get_osdata): Don't check for target_can_run.
10506 Instead any target that has already been pushed, otherwise
10507 fallback to the default run target.
10509 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10511 * target.c (target_create_inferior, target_detach)
10512 (target_mourn_inferior, target_attach, target_close): Do target
10514 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
10515 (debug_to_mourn_inferior, debug_to_close): Delete.
10516 (setup_target_debug): Adjust.
10518 2009-02-05 Pedro Alves <pedro@codesourcery.com>
10520 * target.h (target_stopped_data_address_p): Delete declaration,
10521 and don't define as macro.
10522 * target.c (target_stopped_data_address_p): Delete.
10524 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
10525 Tom Tromey <tromey@redhat.com>
10527 * python/python-utils.c (target_string_to_unicode): New function.
10528 * python/python-internal.h (target_string_to_unicode): New prototype.
10529 * python/python-value.c (valpy_string): New function.
10530 (value_object_methods): Add `string' entry.
10532 2009-02-05 Pedro Alves <pedro@codesourcery.com>
10534 * target.h (target_tid_to_str): Delete.
10535 * thread.c (print_thread_info, thread_apply_all_command)
10536 (thread_apply_command, thread_command, do_captured_thread_select):
10537 Use target_pid_to_str instead of target_tid_to_str.
10538 * linux-fork.c (delete_fork_command): Likewise.
10540 2009-02-05 Pedro Alves <pedro@codesourcery.com>
10542 * frame.c (has_stack_frames): Make public.
10543 (get_prev_frame): Don't allow a NULL this_frame anymore.
10544 * frame.h (has_stack_frames): Declare.
10545 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
10546 to get_prev_frame, instead start at get_current_frame.
10547 (varobj_create): Check has_stack_frames before getting any frame;
10548 eliminate one usage of deprecated_safe_get_selected_frame.
10550 2009-02-05 Tom Tromey <tromey@redhat.com>
10551 Thiago Jung Bauermann <bauerman@br.ibm.com>
10553 * python/python.c (GdbMethods): Move to bottom of file.
10554 (get_parameter, execute_gdb_command, gdbpy_write,
10555 gdbpy_flush): Remove forward declarations.
10556 (eval_python_from_control_command): Fix error checking of function
10557 PyRun_SimpleString. Fix error string.
10558 (python_command): Likewise.
10559 (execute_gdb_command): Added from_tty argument.
10561 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
10563 * language.h (language_dfn): Add la_get_string member.
10564 (LA_GET_STRING): New macro.
10565 (default_get_string): New prototype.
10566 * language.c (default_get_string): New function.
10567 (unknown_language_defn, auto_language_defn, local_language_defn): Use
10568 default_get_string for la_get_string.
10569 * c-lang.c (c_get_string): New function.
10570 (c_language_defn, cplus_language_defn, asm_language_defn): Use
10571 c_get_string for la_get_string.
10572 (minimal_language_defn): Likewise
10573 * ada-lang.c (ada_language_defn): Likewise.
10574 * f-lang.c (f_language_defn): Use default_get_string for
10576 * jv-lang.c (java_language_defn): Likewise.
10577 * m2-lang.c (m2_language_defn): Likewise.
10578 * objc-lang.c (objc_language_defn): Likewise.
10579 * p-lang.c (p_language_defn): Likewise.
10580 * scm-lang.c (scm_language_defn): Likewise.
10581 * typeprint.c (type_to_string): New function.
10582 * value.h (type_to_string): New prototype.
10583 * valprint.c (val_print_string): Factor out code for reading string
10584 from the inferior into its own function. Put 2 spaces after period
10586 (read_string): New function.
10587 * valprint.h (read_string): New prototype.
10589 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
10590 Tom Tromey <tromey@redhat.com>
10592 PR breakpoints/8079:
10593 * breakpoint.c (print_one_breakpoint): Use exp_string field
10594 to display expression of watchpoints.
10595 (mention): Likewise.
10596 (watch_command_1): Remove trailing whitespace from expression.
10597 * printcmd.c (struct display) <exp_string>: New field.
10598 (display_command): Set exp_string.
10599 (free_display): Free exp_string.
10600 (clear_displays): Use free_display.
10601 (do_one_display): Print exp_string.
10602 (display_info): Likewise.
10604 2009-02-04 Tom Tromey <tromey@redhat.com>
10605 Thiago Jung Bauermann <bauerman@br.ibm.com>
10606 Phil Muldoon <pmuldoon@redhat.com>
10608 * python/python-internal.h (gdbpy_get_value_from_history): Rename
10609 prototype to gdbpy_history.
10610 (gdbpy_is_string): Declare.
10611 (python_string_to_host_string): Declare.
10612 * python/python-utils.c (gdbpy_is_string): New function.
10613 (unicode_to_encoded_string): New function.
10614 (unicode_to_target_string): Use it.
10615 (python_string_to_host_string): New function.
10616 * python/python-value.c (valpy_address): New function.
10617 (convert_value_from_python): Use gdbpy_is_string. Change to throw
10618 Python exception instead of a GDB exception on error. Properly check
10620 (valpy_getitem): Convert field name to host string. Handle array
10621 accesses. Adapt to new behaviour of convert_value_from_python.
10622 (valpy_new): Adapt to new behaviour of convert_value_from_python.
10623 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
10624 VALPY_BITXOR, VALPY_BITOR>: New constants.
10625 (valpy_binop): Update. Adapt to new behaviour of
10626 convert_value_from_python.
10627 (valpy_invert): New function.
10628 (valpy_lsh): Likewise.
10629 (valpy_rsh): Likewise.
10630 (valpy_and): Likewise.
10631 (valpy_or): Likewise.
10632 (valpy_xor): Likewise.
10633 (valpy_richcompare): Call convert_value_from_python instead of doing
10634 conversions itself.
10635 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
10636 (gdbpy_get_value_from_history): Rename
10637 function to gdbpy_history.
10638 (gdbpy_initialize_values): Don't set tp_new.
10639 (value_object_type): Add valpy_new.
10640 (value_object_methods): Add `address' entry.
10641 (value_object_as_number): Update for new methods.
10642 * python/python.c (GdbMethods): Rename entry from
10643 `get_value_from_history' to `history'.
10645 2009-02-04 Jerome Guitton <guitton@adacore.com>
10647 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
10648 of type to guard against a crash.
10650 2009-02-04 Jerome Guitton <guitton@adacore.com>
10652 * value.c (value_from_contents_and_address): Always return
10653 a lval_memory value, even if address is null.
10655 2009-02-04 Tristan Gingold <gingold@adacore.com>
10657 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
10658 (amd64_darwin_sigcontext_addr): Ditto.
10659 (darwin_dwarf_signal_frame_p): Ditto.
10660 (i386_darwin_init_abi): Handle signal frames, use the const for
10662 (x86_darwin_init_abi_64): Ditto.
10664 2009-02-04 Tristan Gingold <gingold@adacore.com>
10666 * i386-tdep.c (i386_sigtramp_p): Make it public.
10667 * i386-tdep.h (i386_sigtramp_p): Declare.
10669 2009-02-04 Tristan Gingold <gingold@adacore.com>
10671 * machoread.c (macho_symfile_read): Read minsymtab also from
10673 (macho_symfile_read): Try to read dwarf2 frame info from main
10674 object file, but not from OSO files.
10675 (macho_symfile_offsets): Update section names for latest BFD
10677 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
10678 (x86_darwin_init_abi_64): Ditto.
10679 * solib-darwin.c: New file.
10680 * solib-darwin.h: New file.
10681 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
10683 2009-02-04 Tristan Gingold <gingold@adacore.com>
10685 * solist.h (struct target_so_ops): Comment fallback behavior for
10688 2009-02-03 Tom Tromey <tromey@redhat.com>
10690 * completer.c (add_struct_fields): Check type_name against NULL
10693 2009-02-03 Joel Brobecker <brobecker@adacore.com>
10695 * MAINTAINERS: Update Elena's email address.
10697 2009-02-02 Joel Brobecker <brobecker@adacore.com>
10699 * breakpoint (update_watchpoint): Minor comment adjustment.
10701 2009-02-02 Tom Tromey <tromey@redhat.com>
10704 * completer.c (count_struct_fields): Count method names.
10705 (add_struct_fields): Add matching method names.
10707 2009-02-02 Doug Evans <dje@google.com>
10709 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
10710 doing any further tcl/tk configury. Don't configure gdbtk if
10711 tcl or tk check fails.
10712 * aclocal.m4: Regenerate.
10713 * configure: Regenerate.
10715 2009-02-02 Tom Tromey <tromey@redhat.com>
10718 * valops.c (find_overload_match): Follow typedefs before taking
10719 address of object argument.
10721 2009-02-01 Doug Evans <dje@google.com>
10723 * target.h (target_waitstatus_to_string): Declare.
10724 * target.c (target_waitstatus_to_string): New function. Copied from
10725 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
10726 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
10727 TARGET_WAITKIND_NO_HISTORY.
10728 (debug_to_wait): Call it.
10729 * infrun.c (wait_for_inferior): If debug_infrun, print result of
10731 (fetch_inferior_event): Ditto.
10733 2009-01-30 Tom Tromey <tromey@redhat.com>
10735 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
10737 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
10740 * thread.c (do_captured_list_thread_ids): Report the current
10743 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
10745 * breakpoint.c (create_breakpoint, create_breakpoints)
10746 (break_command_really, set_breakpoint): New parameter enabled.
10747 (create_breakpoint, break_command_really): Make breakpoint
10748 disabled if so requested.
10749 * breakpoint.h (set_breakpoint): New parameter enabled.
10750 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
10752 2009-01-28 Doug Evans <dje@google.com>
10754 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
10755 (amd64_displaced_step_fixup): Declare.
10756 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
10757 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
10758 and make static global.
10759 (amd64_arch_regmap_len): New static global.
10760 (amd64_arch_reg_to_regnum): New function.
10761 (struct amd64_insn): New struct.
10762 (struct displaced_step_closure): New struct.
10763 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
10764 (rex_prefix_p,skip_prefixes)
10765 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
10766 (amd64_insn_length,amd64_get_unused_input_int_reg)
10767 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
10768 (amd64_displaced_step_copy_insn)
10769 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
10770 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
10771 (amd64_displaced_step_fixup): New functions.
10772 * amd64-linux-tdep.c: #include arch-utils.h.
10773 (amd64_linux_init_abi): Install displaced stepping support.
10775 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
10776 Jerome Guitton <guitton@adacore.com>
10778 * configure, config.in: Regenerated.
10779 * configure.ac: Add --with-system-gdbinit.
10780 * main.c (get_init_files): New.
10781 (captured_main): Use get_init_files. Load system gdbinit before
10783 (print_gdb_help): Print location of init files.
10785 2009-01-28 Pedro Alves <pedro@codesourcery.com>
10787 * corefile.c (generic_search): Delete disabled code.
10788 * gdbcore.h (generic_search): Delete declaration.
10790 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10792 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
10793 parent to the child.
10794 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
10795 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
10796 remove_breakpoints to remove breakpoints from the parent.
10798 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10800 PR backtrace/9458, PR backtrace/8864:
10801 * frame.c (create_new_frame): Update the frame's cached PC before
10802 finding its unwinder. Use frame_id_build to build the new frame's
10804 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
10805 array values from the ``args'' array values.
10807 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10809 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
10810 (create_array_type, create_set_type, init_flags_type)
10811 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
10812 with a call to XZALLOC or XCALLOC, and pairs of calls to
10813 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
10815 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10817 Add "maint set|show internal-error|internal-warning quit|corefile
10818 ask|yes|no" commands.
10821 * utils.c (internal_problem_ask, internal_problem_yes)
10822 (internal_problem_no, internal_problem_modes): New.
10823 (struct internal_problem): Remove FIXME. Make should_quit and
10824 should_dump_core types to char *.
10825 (internal_vproblem, internal_error_problem)
10826 (internal_warning_problem): Adjust.
10827 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
10829 (add_internal_problem_command): New.
10830 (_initialize_utils): New.
10832 2009-01-25 Pedro Alves <pedro@codesourcery.com>
10834 * infcmd.c (program_info): Use paddress instead of casting stop_pc
10837 2009-01-24 Pedro Alves <pedro@codesourcery.com>
10839 * infrun.c (normal_stop): Don't call
10840 deprecated_update_frame_pc_hack.
10841 * frame.c (deprecated_update_frame_pc_hack)
10842 (deprecated_update_frame_base_hack): Delete, and ...
10843 (create_new_frame): ... inline here.
10844 * frame.h (deprecated_update_frame_pc_hack)
10845 (deprecated_update_frame_base_hack): Delete declarations.
10847 2009-01-23 Pedro Alves <pedro@codesourcery.com>
10849 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
10850 * cli/cli-setshow.c (do_setshow_command): Handle it.
10851 * command.h (enum var_types): Add var_zuinteger.
10852 (add_setshow_zuinteger_cmd): Declare.
10854 * valprint.c (_initialize_valprint): Change the set input-radix
10855 and set output-radix commands to zuinteger type.
10857 2009-01-23 Pedro Alves <pedro@codesourcery.com>
10860 * infrun.c (normal_stop): Tag threads as stopped, and run the
10861 hook-stop before printing the stack frame.
10863 2009-01-22 Pedro Alves <pedro@codesourcery.com>
10866 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
10869 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
10871 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
10874 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
10877 * infcmd.c (signal_command): Do not specify a resume PC.
10879 2009-01-19 Doug Evans <dje@google.com>
10881 * dummy-frame.c (dummy_frame): Replace regcache member with
10883 (dummy_frame_push): Replace caller_regcache arg with caller_state.
10884 All callers updated.
10885 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
10886 (dummy_frame_pop): Rewrite. Verify requested frame is in the
10887 dummy frame stack. Restore program state.
10888 (cleanup_dummy_frames): Rewrite.
10889 (dummy_frame_sniffer): Update. Make static.
10890 * dummy-frame.h (regcache,frame_info): Delete forward decls.
10891 (inferior_thread_state): New forward decl.
10892 (dummy_frame_push): Update prototype.
10893 * frame.c (frame_pop): dummy_frame_pop now does all the work for
10895 * infcall.c (breakpoint_auto_delete_contents): Delete.
10896 (get_function_name,run_inferior_call): New fns.
10897 (call_function_by_hand): Simplify by moving some code to
10898 get_function_name, run_inferior_call. Inferior function call wrapped
10899 in TRY_CATCH so there's less need for cleanups and all exits from
10900 proceed are handled similarily. Detect program exit.
10901 Detect program stopping in a different thread.
10902 Make error messages more consistent.
10903 * inferior.h (inferior_thread_state): Declare (opaque type).
10904 (save_inferior_thread_state,restore_inferior_thread_state,
10905 make_cleanup_restore_inferior_thread_state,
10906 discard_inferior_thread_state, get_inferior_thread_state_regcache):
10908 (save_inferior_status): Update prototype.
10909 * infrun.c: (normal_stop): When stopped for the completion of an
10910 inferior function call, verify the expected stack frame kind.
10911 (inferior_thread_state): New struct.
10912 (save_inferior_thread_state,restore_inferior_thread_state,
10913 do_restore_inferior_thread_state_cleanup,
10914 make_cleanup_restore_inferior_thread_state,
10915 discard_inferior_thread_state,
10916 get_inferior_thread_state_regcache): New functions.
10917 (inferior_status): Move stop_signal, stop_pc, registers to
10918 inferior_thread_state. Remove restore_stack_info.
10919 (save_inferior_status): Remove arg restore_stack_info.
10920 All callers updated. Remove saving of state now saved by
10921 save_inferior_thread_state.
10922 (restore_inferior_status): Remove restoration of state now done by
10923 restore_inferior_thread_state.
10924 (discard_inferior_status): Remove freeing of registers, now done by
10925 discard_inferior_thread_state.
10927 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10929 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
10930 at a time, times NUM_TO_SCROLL.
10931 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
10932 fetch the selected frame if there is no stack.
10934 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10937 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
10939 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
10940 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
10941 is thrown while handling an event, finish the thread state.
10942 (normal_stop): Use finish_thread_state cleanup.
10943 * infcmd.c (run_command_1): If an error is thrown while starting
10944 the inferior, finish the thread state.
10946 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10948 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
10949 skip breakpoints without a location (pending breakpoints).
10951 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10954 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
10956 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
10958 * thread.c (thread_command): Move call to annotate_thread_changed
10960 (do_captured_thread_select): ... here, to avoid printing an
10961 annotation if the thread change generates an exception.
10963 2009-01-16 Joel Brobecker <brobecker@adacore.com>
10965 * NEWS: Document x86_64/MinGW as a new native configuration.
10967 2009-01-16 Joel Brobecker <brobecker@adacore.com>
10969 * NEWS: Move the documentation of "info os processes" to
10970 the appropriate section (documenting the new commands).
10972 2009-01-15 Doug Evans <dje@google.com>
10974 * target.h (target_signal_to_string): Make return type const char *.
10975 (target_signal_to_name): Ditto.
10976 (target_signal_from_name): Make arg const char *.
10977 * infrun.c (sig_print_info): Update.
10978 * signals/signals.c (signals): Make array and struct members const.
10979 (target_signal_to_string): Make return type const char *.
10980 (target_signal_to_name): Ditto.
10981 (target_signal_from_name): Make arg const char *.
10983 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10984 Tristan Gingold <gingold@adacore.com>
10986 * solist.h (struct target_so_ops): New member bfd_open.
10987 (solib_find): Add prototype.
10988 (solib_bfd_fopen): Add prototype.
10989 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
10990 from solib_bfd_open.
10991 (solib_bfd_open): Use ops->bfd_open override if present. Call
10992 solib_find and solib_bfd_open otherwise.
10994 * objfiles.h (OBJF_KEEPBFD): New define.
10995 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
10996 objfile flag is set.
10997 * solib.c (symbol_add_stub): Do not allocate second BFD for
10998 shared library; use OBJF_KEEPBFD flag on solib objfile.
11000 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
11002 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
11004 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
11006 * value.h (address_of_variable): Add prototype.
11007 (locate_var_value): Remove prototype.
11009 * findvar.c (read_var_value): Do not attempt to default frame
11011 (locate_var_value): Remove function.
11012 * valops.c (value_of_variable): Retrieve selected frame for
11013 symbols that require a frame when called with NULL block.
11014 * valops.c (address_of_variable): New function.
11016 * eval.c (evaluate_subexp_for_address): Call address_of_variable
11017 instead of calling locate_var_value.
11018 (evaluate_subexp_with_coercion): Likewise.
11020 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
11022 * NEWS: Document "define" for prefixed commands.
11023 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
11024 show_user_1 for prefix commands.
11025 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
11026 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
11027 commands. Return the containing command list.
11028 (define_command, document_command): Update to handle prefix commands.
11029 (show_user_1): Add prefix and name arguments. Handle prefix
11031 * cli/cli-script.h (show_user_1): Update prototype.
11033 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
11035 * ser-mingw.c (console_select_thread): Add return to make
11037 (pipe_select_thread): Likewise.
11038 (file_select_thread): Likewise.
11040 2009-01-14 Pedro Alves <pedro@codesourcery.com>
11042 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
11045 2009-01-14 Pedro Alves <pedro@codesourcery.com>
11047 * remote.c (extended_remote_mourn_1): Invalidate our notion of
11048 current general thread.
11050 2009-01-14 Pedro Alves <pedro@codesourcery.com>
11052 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
11053 without a live selected thread.
11055 2009-01-14 Joel Brobecker <brobecker@adacore.com>
11057 Update the copyright notice of some of the files I missed
11058 in the previous copyright update.
11060 2009-01-14 Joel Brobecker <brobecker@adacore.com>
11062 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
11063 base address instead of casting it to DWORD.
11065 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
11067 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
11068 for NULL frame pointers.
11070 2009-01-13 Mark Kettenis <kettenis@gnu.org>
11072 * utils.c (host_address_to_string): Reimplement in a way that
11073 avoids the cast of the address to long.
11075 2009-01-13 Joel Brobecker <brobecker@adacore.com>
11077 * mdebugread.c (parse_symbol): Save the symbol private data
11078 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
11079 (psymtab_to_symtab_1): Likewise.
11080 (parse_procedure): Declare variable "e" only in the scope
11081 where it is used. Extract the symbol private data using
11082 SYMBOL_VALUE_BYTES.
11084 2009-01-13 Jim Blandy <jimb@codesourcery.com>
11086 Abstract out common code for copying value locations.
11088 * value.h (set_value_component_location): New declaration.
11089 * value.c (set_value_component_location): New function.
11090 (value_primitive_field): Use it.
11091 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
11092 * valops.c (search_struct_field, value_slice): Same.
11093 * ada-lang.c (coerce_unspec_val_to_type)
11094 (ada_value_primitive_packed_val): Same.
11096 2009-01-13 Joel Brobecker <brobecker@adacore.com>
11098 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
11100 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
11102 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
11104 * i386-cygwin-tdep.c: Ditto.
11105 * i386-windows-nat.c: Ditto.
11106 * windows-nat.h: Ditto.
11107 * windows-tdep.c: Ditto.
11108 * windows-tdep.h: Ditto.
11109 * windows-nat.c: Ditto.
11110 (cygwin_load_start): Redefine as CORE_ADDR.
11111 (cygwin_load_end): Ditto.
11112 (windows_make_so): Coerce result of address arithmetic to uintptr_t
11113 before coercing to CORE_ADDR to avoid a compiler warning.
11114 (handle_exception): Define addr as CORE_ADDR and coerce
11115 ExceptionAddress to uintptr_t before assigining to avoid a compiler
11117 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
11120 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
11122 Fix linking with --enable-targets=all:
11123 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
11124 (HFILES_NO_SRCDIR): Add windows-tdep.h.
11125 (ALLDEPFILES): Add windows-tdep.c.
11127 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
11129 * win32-nat.h: Delete.
11130 * windows-nat.h: Rename from win32-nat.h.
11131 * win32-nat.c: Delete.
11132 * windows-nat.c: Rename from win32-nat.c.
11133 * win32-termcap.c: Delete.
11134 * windows-termcap.c: Rename from win32-termcap.c.
11135 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
11136 * configure.ac: Handle rename from win32-termcap.c ->
11138 * configure: Regenerate.
11139 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
11140 -> windows-termcap.c.
11141 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
11143 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
11144 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
11146 (win32_make_so): Handle cygwin compiler warning due to change of
11147 load_addr from DWORD to LPVOID.
11148 (handle_load_dll): Use %p in format string to properly print address
11149 and avoid a compiler warning.
11150 (DEBUG_EXCEPTION_SIMPLE): Ditto.
11151 (handle_exception): Ditto.
11152 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
11153 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
11155 * config/i386/mingw.mh: Ditto.
11156 * config/i386/mingw64.mh: Ditto.
11158 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
11160 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
11161 arrayprint_recurse_level to a parameter. Update all the callers. New
11162 comment at autovariables.
11164 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
11166 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
11169 2009-01-11 Joel Brobecker <brobecker@adacore.com>
11171 * target.c (target_xfer_partial): Use host_address_to_string to
11172 print the address of readbuf and writebuf. Cast the address of
11173 elements inside the myaddr buffer into intptr_t.
11174 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
11175 Cast the address of elements inside the myaddr buffer into
11178 2009-01-11 Joel Brobecker <brobecker@adacore.com>
11180 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
11181 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
11182 * configure.host, configure.tgt: Add handling for x86_64/windows.
11183 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
11184 and amd64-windows-tdep.c.
11186 2009-01-11 Joel Brobecker <brobecker@adacore.com>
11188 * win32-tdep.h, win32-tdep.c: New files.
11189 * i386-cygwin-tdep.h: Delete.
11190 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
11191 i386-cygwin-tdep.h.
11192 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
11193 * win32-nat.c: Likewise.
11194 * configure.tgt: Add win32-tdep.o to the list of target object
11195 files for i386-cygwin and i386-mingw targets.
11197 2009-01-11 Joel Brobecker <brobecker@adacore.com>
11199 * win32-nat.h: New file.
11200 * win32-nat.c (mappings): Initialize to NULL.
11201 (win32_set_context_register_offsets): New function.
11202 * i386-windows-nat.c: New file.
11203 (mappings): Moved here from win32-nat.c.
11204 (_initialize_i386_windows_nat): New function.
11205 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
11206 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
11208 2009-01-09 Andreas Schwab <schwab@suse.de>
11210 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
11212 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
11214 * gdbtypes.c (append_composite_type_field): Correct the location of
11217 2009-01-09 Pedro Alves <pedro@codesourcery.com>
11219 * defs.h (deprecated_error_hook): Delete declaration.
11220 * interps.c (clear_interpreter_hooks): Adjust.
11221 * remote-sim.c (gdb_os_error): Don't try to call
11222 deprecated_error_hook. No need to call exit anymore.
11223 * top.c (deprecated_error_hook): Delete.
11225 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11227 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
11228 to print the address of the gdbarch pointer.
11230 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11232 * gdbarch.sh: Fix all the compilation errors on amd64-windows
11233 due to casting a pointer to a long when printing a function
11234 address. Instead, use host_address_to_string to convert our
11235 address to a string.
11236 * gdbarch.c: Regenerate.
11238 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11240 * event-top.c (async_disconnect, async_stop_sig): use "raise"
11241 instead of "kill" to raise a signal.
11243 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11245 * win32-nat.c (get_module_name): Change the type of parameter
11246 "base_address" to LPVOID. Remove unnecessary cast.
11247 (struct lm_info): Change type of load_addr to LPVOID.
11248 (win32_make_so): Change the type of parameter "load_addr"
11249 to LPVOID. Remove some unnecessary casts.
11250 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
11251 (win32_xfer_shared_libraries): Add missing cast.
11253 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11255 * win32-nat.c (has_detach_ability, set_process_privilege):
11256 Cast the result of GetProcAddress to (void *) to avoid
11257 a compilation warning.
11259 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11261 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
11264 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11266 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
11267 definition of local variable "done".
11268 (info_w32_command, handle_exception): Remove unnecessary cast.
11270 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11272 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
11273 DebugSetProcessKillOnExit. Update all uses in this file.
11274 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
11275 Update all uses in this file.
11277 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11279 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
11280 and use it when pushing the target.
11281 (win32_attach, win32_create_inferior): Update call to
11282 do_initial_win32_stuff.
11283 (win32_detach, win32_mourn_inferior): Use our ops parameter
11284 instead of the global win32_ops to unpush the target.
11286 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11288 * ser-mingw.c (ser_windows_open): Use proper type when casting
11289 in call to _open_osfhandle.
11291 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
11293 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
11295 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11297 * CONTRIBUTE: Minor reformatting.
11299 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
11301 * MAINTAINERS: Add myself to Write After Approval.
11302 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
11305 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
11307 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
11308 Call exit to make it obvious to GCC.
11310 2009-01-08 Tom Tromey <tromey@redhat.com>
11312 PR breakpoints/9350:
11313 * varobj.c (varobj_invalidate): Unconditionally free
11315 * symfile.c (syms_from_objfile): Free local_addr when returning
11317 * exec.c (exec_file_attach): Do cleanups before returning.
11318 (exec_file_command): Likewise.
11319 * corefile.c (reopen_exec_file): Do cleanups before returning.
11320 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
11322 (do_vec_free): New function.
11323 (update_global_location_list): Make a cleanup for old_locations.
11324 Do cleanups before returning. Remove unused variable 'e'.
11325 (find_condition_and_thread): Free result of parsing the
11327 (print_it_typical): Do cleanups before returning.
11328 (breakpoint_re_set_one): Always free sals.sals.
11330 2009-01-08 Joel Brobecker <brobecker@adacore.com>
11331 Emi Suzuki <emi-suzuki@tjsys.co.jp>
11333 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
11336 2009-01-07 Doug Evans <dje@google.com>
11338 * top.c (gdb_prompt_string): Delete, unused.
11340 2009-01-07 Pedro Alves <pedro@codesourcery.com>
11342 Delete ONE_PROCESS_WRITETEXT leftovers.
11344 * breakpoint.c (insert_bp_location): Delete process_warning
11346 (insert_breakpoint_locations): Adjust.
11347 (reattach_breakpoints): Adjust.
11348 * infrun.c (normal_stop): Drop "It might be running in another
11351 2009-01-07 Stan Shebs <stan@codesourcery.com>
11353 * config/pa/linux.mh (XDEPFILES): Remove.
11355 2009-01-07 Doug Evans <dje@google.com>
11357 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
11359 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
11361 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
11362 spacing, a regression from 2008-04-22.
11364 2009-01-07 Joel Brobecker <brobecker@adacore.com>
11366 * utils.c (gdb_print_host_address): Adjust implementation to
11367 reuse host_address_to_string. Move comment explaining the conversion
11368 from host address to string from here...
11369 (host_address_to_string): ... to there.
11371 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
11373 * MAINTAINERS: Add myself for write after approval privileges.
11375 2009-01-06 Tom Tromey <tromey@redhat.com>
11377 * value.c (set_internalvar): Use value_free, not xfree.
11379 2009-01-06 Jim Blandy <jimb@red-bean.com>
11381 Check return values of functions declared with warn_unused_result
11382 attribute in GLIBC 2.8.
11383 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
11384 * inflow.c (check_syscall): New function.
11385 (new_tty): Use check_syscall to check return values from open and dup.
11386 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
11387 * main.c (captured_main): Call cwd after setting up gdb_stderr;
11388 check for errors from getcwd.
11389 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
11390 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
11391 (stdio_file_fputs): Same.
11392 * utils.c (internal_vproblem): abort if last-ditch error message
11395 * top.c (gdb_init): Don't set the current directory here; that's
11396 already been done in captured_main.
11398 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
11400 * ser-tcp.c: Adjust includes.
11401 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
11402 (tcp_auto_retry, tcp_retry_limit): Declare.
11403 (TIMEOUT): Remove, in favor of tcp_retry_limit.
11404 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
11405 (wait_for_connect): New function.
11406 (net_open): Use it. Add auto-retry logic.
11407 (set_tcp_cmd, show_tcp_cmd): New functions.
11408 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
11409 and "set/show tcp connect-timeout" commands.
11410 * NEWS: Document new commands.
11412 2009-01-05 Tom Tromey <tromey@redhat.com>
11414 * python/python-internal.h (Py_ssize_t): Define as int.
11416 2009-01-05 Jim Blandy <jimb@red-bean.com>
11418 * MAINTAINERS: Fix my e-mail address as steering committee member.
11420 2009-01-03 Joel Brobecker <brobecker@adacore.com>
11422 Updated copyright notices for most files.
11424 2009-01-03 Joel Brobecker <brobecker@adacore.com>
11426 * top.c (print_gdb_version): Update copyright year.
11428 2009-01-03 Joel Brobecker <brobecker@adacore.com>
11430 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
11432 2009-01-01 Pedro Alves <pedro@codesourcery.com>
11434 PR breakpoints/9681:
11435 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
11436 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
11437 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
11438 retrow all other exceptions.
11440 For older changes see ChangeLog-2008.
11446 version-control: never