1 2009-10-06 Joel Brobecker <brobecker@adacore.com>
3 * MAINTAINERS: Add Tristan Gingold as Maintainer of the Darwin port.
5 2009-10-06 Joel Brobecker <brobecker@adacore.com>
7 * MAINTAINERS: Add Jan Kratochvil as Maintainer of the ia64 target.
9 2009-10-05 Pedro Alves <pedro@codesourcery.com>
12 2009-10-04 Pedro Alves <pedro@codesourcery.com>
13 * gdbinit.in: Set data-directory to @srcdir@.
15 2009-10-04 Pedro Alves <pedro@codesourcery.com>
17 * NEWS: Mention non-stop mode.
19 2009-10-04 Pedro Alves <pedro@codesourcery.com>
21 * gdbinit.in: Set data-directory to @srcdir@.
23 2009-10-02 Pedro Alves <pedro@codesourcery.com>
25 * linux-nat.c (TRAP_IS_SYSCALL, TRAP_REMOVE_SYSCALL_FLAG): Delete.
26 (SYSCALL_SIGTRAP): New.
27 (status_to_str): Adjust.
28 (get_pending_status): Pending events in lp->waitstatus don't map
29 to any signal. Simplify.
30 (linux_handle_syscall_trap): New.
31 (linux_handle_extended_wait): When handling PTRACE_EVENT_CLONE
32 events, use linux_ops->to_resume instead of direct ptrace with
33 PTRACE_CONT. Remove all TRAP_IS_SYSCALL handling.
34 (wait_lwp): Handle syscall traps with linux_handle_syscall_trap,
35 and clear the sysgood bit.
36 (status_callback): Make it clearer and add comments.
37 (cancel_breakpoints_callback): Ignore if LP has waitstatus set.
38 (linux_nat_filter_event): Handle syscall traps with
39 linux_handle_syscall_trap, and clear the sysgood bit. Move the
40 check for storing siginfo to after handling extended statuses and
41 syscall traps. Store status in the lwp object.
42 (linux_wait_1): Don't swap the pending status out of the lwp
43 object until after deciding we found an lwp with an interesting
44 event. Requeue a new pending signal if we find one while getting
45 rid or a pending SIGSTOP we sent ourselves. Don't clear the
48 * infrun.c (deal_with_syscall_event): Rename to ...
49 (handle_syscall_event): ... this. Always context switch and set
50 stop_pc, even if not catching the syscall. If not catching the
51 syscall, always resume with keep_going.
52 (handle_inferior_event): Adjust.
54 2009-10-02 Jan Kratochvil <jan.kratochvil@redhat.com>
56 Fix compatibility of --with-system-readline and readline-6.0+.
57 * configure.ac <--with-system-readline> (for readline_echoing_p): New
59 * config.in: Regenerate.
60 * configure: Regenerate.
62 2009-10-01 Joel Brobecker <brobecker@adacore.com>
64 * MAINTAINERS: Move Don Lee to the correct section (Write After
67 2009-10-01 Phil Muldoon <pmuldoon@redhat.com>
69 * infcall.c (call_function_by_hand): Add a new cleanup branch for
70 std::terminate breakpoints.
72 2009-09-29 Jan Kratochvil <jan.kratochvil@redhat.com>
74 * ia64-tdep.c (ia64_convert_from_func_ptr_addr): New variable buf.
75 Check first the descriptor memory is readable.
77 2009-09-29 Tom Tromey <tromey@redhat.com>
79 * python/py-value.c (valpy_string): NULL-terminate 'keywords'.
81 2009-09-29 Ulrich Weigand <uweigand@de.ibm.com>
83 * s390-tdep.c (s390_displaced_step_fixup): Use type ULONGEST
84 instead of CORE_ADDR for "amode".
86 2009-09-29 Joel Brobecker <brobecker@adacore.com>
88 * ia64-tdep.c: Update the comments on how we insert/remove
89 breakpoints for L-X instructions.
90 (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint):
91 Update the comments inside these functions.
93 2009-09-28 Ulrich Weigand <uweigand@de.ibm.com>
95 * gdbarch.sh (displaced_step_hw_singlestep): New callback.
96 * gdbarch.c, gdbarch.h: Regenerate.
97 * arch-utils.c (default_displaced_step_hw_singlestep): New function.
98 * arch-utils.h (default_displaced_step_hw_singlestep): Add prototype.
100 * ppc-linux-tdep.c (ppc_displaced_step_hw_singlestep): New function.
101 (rs6000_gdbarch_init): Install it.
103 * infrun.c (displaced_step_fixup): Use new callback to determine
104 whether to "step" or "continue" displaced copy.
105 (resume): Likewise. Do not call maybe_software_singlestep
106 for displaced stepping.
107 (maybe_software_singlestep): Do not handle displaced stepping.
109 2009-09-28 Ulrich Weigand <uweigand@de.ibm.com>
111 * eval.c (evaluate_subexp_standard) [OP_OBJC_MSGCALL]: Support
112 platforms that use function descriptors. Prefer to use function
113 pointer types instead of function types.
114 * linespec.c (decode_objc): Support function descriptors. Fully
115 initialize SAL result.
116 * objc-lang.c (find_methods): Support function descriptors.
117 Do not require function symbol to point to text section.
119 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): When calling
120 via a function pointer, use the descriptor it points to.
122 2009-09-28 Jan Kratochvil <jan.kratochvil@redhat.com>
124 Fix ia64 breakpoints in the L-X slot.
125 * ia64-tdep.c (ia64_memory_insert_breakpoint): Extend the comment.
126 New variable shadow_slotnum, use it appropriately instead of slotnum.
127 Move shadow_len initialization before SLOTNUM adjustment, cover now the
128 whole remaining bundle. Error now on breakpoints requested for the
129 slot 2 of L-X bundles. Better sanity check the requested slot 1 of L-X
131 (ia64_memory_remove_breakpoint): New variable shadow_slotnum, use it
132 appropriately instead of slotnum. Warn now on breakpoints requested
133 for the slot 2 of L-X bundles. Better sanity check the requested slot
134 1 of L-X bundles. Update the assertio check of PLACED_SIZE.
135 (ia64_breakpoint_from_pc): New variable shadow_slotnum, use it
136 appropriately instead of slotnum. Move *lenptr initialization before
137 SLOTNUM adjustment, cover now the whole remaining bundle. Error now
138 on breakpoints requested for the slot 2 of L-X bundles. Better sanity
139 check the requested slot 1 of L-X bundles. Simplify the returned
142 2009-09-28 Joel Brobecker <brobecker@adacore.com>
144 * ia64-tdep.c (ia64_memory_insert_breakpoint): Check the slotnum
145 and the type of instruction before deciding which slot to save
146 in the breakpoint shadown contents.
148 2009-09-28 Doug Evans <dje@google.com>
150 * linux-nat.c (status_to_str): Handle TRAP_IS_SYSCALL.
151 (TRAP_REMOVE_SYSCALL_FLAG): New macro.
152 (linux_nat_wait_1): Mask off is-syscall bit in wait status for
153 TRAP_IS_SYSCALL before passing value to caller.
155 2009-09-28 Ulrich Weigand <uweigand@de.ibm.com>
157 * valops.c (value_assign): Respect parent offset when
158 assigning to a bitfield.
160 2009-09-28 Hui Zhu <teawater@gmail.com>
162 * i386-tdep.c (i386_process_record): Remove "0x" that
165 2009-09-27 Ulrich Weigand <uweigand@de.ibm.com>
167 * s390-tdep.c (op_bctr, op_bctgr, op_bct, op1_bctg, op2_bctg,
168 op_bxh, op1_bxhg, op2_bxhg, op_bxle, op1_bxleg, op2_bxleg,
169 op1_brct, op2_brct, op1_brctg, op2_brctg, op_brxh, op1_brxhg,
170 op2_brxhg, op_brxle, op1_brxlg, op2_brxlg): New enum values.
171 (is_rsi, is_rie): New insn format decoder routines.
172 (s390_displaced_step_fixup): New function.
173 (s390_gdbarch_init): Install displaced stepping routines.
175 2009-09-27 Ulrich Weigand <uweigand@de.ibm.com>
177 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*):
178 Add linux-tdep.o to gdb_target_obs.
179 (s390*-*-*): Likewise.
181 2009-09-27 Don Lee <don.lee@sunplusct.com>
183 * score-tdep.c: Comment out some simulator dependent codes.
184 * score-tdep.h: Delete some simulator dependent macro definitions.
186 2009-09-27 Hui Zhu <teawater@gmail.com>
188 * record.c (record_open): Change "query" to "error".
189 (cmd_record_stop): Change "query" to "printf_unfiltered".
191 2009-09-26 Pierre Muller <muller@ics.u-strasbg.fr>
193 * i386-nat.c (i386_stopped_data_address): Also check that
194 hitted watch register is not vacant.
196 2009-09-25 Tom Tromey <tromey@redhat.com>
199 * language.h (struct language_defn) <la_get_string>: Add
200 'char_type' argument.
201 (LA_GET_STRING): Likewise.
202 (default_get_string, c_get_string): Update.
203 * language.c (default_get_string): Add 'char_type' argument.
204 * c-valprint.c (c_textual_element_type): Rename from
205 textual_element_type. No longer static. Update callers.
206 * c-lang.h (c_textual_element_type): Declare.
207 * c-lang.c (c_get_string): Add 'char_type' argument.
209 2009-09-25 Tom Tromey <tromey@redhat.com>
211 * charset.c (iconv_open): Use UTF-16 and UTF-32, not UCS-2 and
213 (iconv): Rename 'ucs_flag'.
214 (GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
215 * c-lang.c (charset_for_string_type): Use UTF-16 and UTF-32, not
217 (convert_ucn): Use UTF-32.
219 2009-09-25 Nick Roberts <nickrob@snap.net.nz>
221 * mi/gdb-mi.el: Remove file.
223 2009-09-23 Joel Brobecker <brobecker@adacore.com>
225 * record.c (record_open, record_store_registers, record_xfer_partial):
226 Replace calls to nquery by calls to query.
228 2009-09-23 John Wright <john.wright@hp.com>
231 * event-top.c (command_line_handler): Terminate linebuffer before
234 2009-09-22 Joel Brobecker <brobecker@adacore.com>
236 * solib.c (solib_bfd_open): Relax a bit the compatibility check.
238 2009-09-22 Daniel Jacobowitz <dan@codesourcery.com>
240 * source.c (forget_cached_source_info): Clear last_source_visited.
241 (init_last_source_visited): Delete.
242 (directory_command): Do not clear last_source_visited. Call
243 forget_cached_source_info only if required.
244 (unset_substitute_path_command, set_substitute_path_command): Call
245 forget_cached_source_info.
246 * mi/mi-cmd-env.c (mi_cmd_env_dir): Do not call
247 init_last_source_visited.
248 * defs.h (init_last_source_visited): Delete declaration.
250 2009-09-22 Tom Tromey <tromey@redhat.com>
253 * python/py-value.c (valpy_int): Use PyLong_FromLongLong.
254 (valpy_long): Likewise.
256 2009-09-22 Tom Tromey <tromey@redhat.com>
259 * eval.c (evaluate_subexp_standard) <do_call_it>: Handle internal
260 functions in EVAL_AVOID_SIDE_EFFECTS case.
262 2009-09-22 Jie Zhang <jie.zhang@analog.com>
264 * MAINTAINERS: Add myself under Write After Approval.
266 2009-09-22 Pierre Muller <muller@ics.u-strasbg.fr>
268 * windows-nat.c (ctrl_c_handler): Also handle CTRL_BREAK_EVENT.
270 2009-09-18 Keith Seitz <keiths@redhat.com>
272 * cp-support.h (cp_validate_operator): Declare new function.
273 * cp-support.c (cp_validate_operator): New function.
274 * linespec.c (decode_compound): For C++ check for a valid operator.
276 2009-09-21 Keith Seitz <keiths@redhat.com>
278 * c-exp.y (qualified_name): Call CHECK_TYPEDEF before deciding
279 that a type is not an aggregate type.
281 2009-09-21 Jason Orendorff <jason.orendorff@gmail.com>
284 * python/py-function.c (fnpy_init): Use xstrdup.
286 2009-09-21 Jie Zhang <jie.zhang@analog.com>
288 * doc/gdb.texinfo: Escape "{" and "}".
290 2009-09-21 Phil Muldoon <pmuldoon@redhat.com>
294 * c-lang.c (c_printstr): Do not loop past options->print_max when
295 iterating with wchar_iterate.
297 2009-09-21 Phil Muldoon <pmuldoon@redhat.com>
299 * python/py-value.c (valpy_getitem): Test value before allowing
302 2009-09-21 Hui Zhu <teawater@gmail.com>
303 Michael Snyder <msnyder@vmware.com>
305 * amd64-linux-tdep.c (amd64_all_but_ip_registers_record): New
307 (amd64_linux_syscall_record): Call
308 amd64_all_but_ip_registers_record if syscall is
310 (AMD64_LINUX_redzone, AMD64_LINUX_xstate,
311 AMD64_LINUX_frame_size): New macros.
312 (amd64_linux_record_signal): New function.
313 (amd64_linux_init_abi): Call set_gdbarch_process_record_signal.
315 2009-09-21 Hui Zhu <teawater@gmail.com>
316 Michael Snyder <msnyder@vmware.com>
318 * i386-linux-tdep.c (i386_all_but_ip_registers_record): New
320 (i386_linux_intx80_sysenter_record): Call
321 i386_all_but_ip_registers_record if syscall is sys_sigreturn
323 (I386_LINUX_xstate, I386_LINUX_frame_size): New macros.
324 (i386_linux_record_signal): New function.
325 (i386_linux_init_abi): Call set_gdbarch_process_record_signal.
327 2009-09-21 Hui Zhu <teawater@gmail.com>
328 Michael Snyder <msnyder@vmware.com>
330 * record.c (record_end_entry): New struct.
331 (record_type): Add end.
332 (record_arch_list_add_end): Set rec->u.end.sigval to
334 (record_message_args): New struct.
335 (record_message): Call gdbarch_process_record_signal.
336 (do_record_message): Add argument "signal".
337 (record_resume): Ditto.
338 (record_wait): Ditto. Check record_list->u.end.sigval
341 2009-09-21 Hui Zhu <teawater@gmail.com>
342 Michael Snyder <msnyder@vmware.com>
344 * gdbarch.sh (process_record_signal): New interface.
346 2009-09-19 Matt Rice <ratmice@gmail.com> (tiny change)
348 Checked in by Joel Brobecker <brobecker@gnat.com>
349 * varobj.c (varobj_update): Initialize children_changed.
351 2009-09-19 Vladimir Prus <vladimir@codesourcery.com>
353 * mi/mi-cmd-stack.c (list_args_or_locals): Workaround
356 2009-09-19 Vladimir Prus <vladimir@codesourcery.com>
358 * mi/mi-cmds.h (mi_cmd_stack_list_variables): Declare.
359 * mi/mi-cmds.c (mi_cmds): Register -stack-list-variables.
360 * mi/mi-cmd-stack.c (enum what_to_list): New.
361 (list_args_or_locals): Accept what_to_list parameter.
362 Use 'variables' as output name of all are requested.
363 (mi_cmd_stack_list_variables): New.
364 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Adjust.
366 2009-09-19 Eli Zaretskii <eliz@gnu.org>
368 * config/djgpp/fnchange.lst: Add missing edits.
370 2009-09-18 Maxim Grigoriev <maxim2405@gmail.com>
372 * xtensa-tdep.c (call0_analyze_prologue): Replace INT_MAX by UNIT_MAX.
374 2009-09-18 Jan Kratochvil <jan.kratochvil@redhat.com>
376 * objfiles.c (free_objfile): Clear SYMFILE_OBJFILE if it is OBJFILE.
377 * rs6000-nat.c (vmap_ldinfo): Only assertion check SYMFILE_OBJFILE now.
378 * symfile.c (syms_from_objfile, symbol_file_clear): Likewise.
380 2009-09-18 Ulrich Weigand <uweigand@de.ibm.com>
382 * rs6000-tdep.c (rs6000_builtin_type_vec128): Add v2_double
385 2009-09-17 Joel Brobecker <brobecker@adacore.com>
387 Fix a build failure on pa-hpux:
388 * gdb_ptrace.h (PT_SYSCALL): Define here if not already defined.
389 * inf-ttrace.c (inf_ttrace_wait): Fix compilation failure
390 introduced after field syscall_id inside struct target_waitstatus
391 has been renamed into syscall_number.
393 2009-09-16 H.J. Lu <hongjiu.lu@intel.com>
396 * Makefile.in (GDB_DATADIR_PATH): Renamed to ...
398 (xml-syscall-install): Updated.
400 2009-09-16 Joel Brobecker <brobecker@adacore.com>
402 GDB 7.0 branch created (branch timestamp: 2009-09-16 19:00 UTC)
403 * version.in: Bump version to 7.0.50.20090916-cvs.
405 2009-09-15 Tom Tromey <tromey@redhat.com>
407 * varobj.h (varobj_update_result_t) <new>: New field.
408 (varobj_get_child_range, varobj_set_child_range): Declare.
409 (varobj_list_children): Update.
410 (varobj_enable_pretty_printing, varobj_has_more)
411 (varobj_pretty_printed_p): Declare.
412 * varobj.c (pretty_printing): New global.
413 (varobj_enable_pretty_printing): New function.
414 (struct varobj_root) <from, to, constructor, child_iter,
415 saved_item>: New fields.
416 (varobj_create): Don't call install_default_visualizer.
417 (instantiate_pretty_printer): Don't use value_copy.
418 (varobj_has_more): New function.
419 (restrict_range): New function.
420 (install_dynamic_child): Likewise.
421 (dynamic_varobj_has_child_method): Likewise.
422 (update_dynamic_varobj_children): Remove 'new_and_unchanged'
423 argument; add 'new', 'unchanged', 'from', and 'to' arguments.
425 (varobj_get_num_children): Call update_dynamic_varobj_children.
426 (varobj_list_children): Add 'from' and 'to' arguments. Ignore
427 result of update_dynamic_varobj_children. Don't call
428 install_default_visualizer. Restrict result range.
429 (varobj_add_child): Don't call install_default_visualizer.
430 (varobj_pretty_printed_p): New function.
431 (install_visualizer): Rewrite. Move earlier in file.
432 (install_default_visualizer): Likewise.
433 (construct_visualizer): New function.
434 (install_new_value_visualizer): Likewise.
435 (install_new_value): Don't call release_value. Special case
436 pretty-printed objects. Use value_incref. Rearrange "changed"
438 (varobj_get_child_range): New function.
439 (varobj_set_child_range): Likewise.
440 (varobj_set_visualizer): Rewrite.
441 (varobj_update): Rewrite pretty-printing logic.
442 (new_variable): Initialize new fields.
443 (free_variable): Destroy new fields.
444 (value_of_root): Copy 'from' and 'to'.
445 (my_value_of_variable): Handle pretty-printers.
446 (value_get_print_value): Rework pretty-printing logic.
447 (cplus_describe_child): Don't use release_value.
448 * mi/mi-cmds.h (mi_cmd_enable_pretty_printing)
449 (mi_cmd_var_set_update_range): Declare.
450 * mi/mi-cmds.c (mi_cmds): Add enable-pretty-printing and
451 var-set-update-range.
452 * mi/mi-cmd-var.c (print_varobj): Update. Emit "dynamic"
454 (mi_cmd_var_create): Emit "has_more" attribute.
455 (mi_cmd_var_set_format): Plug memory leak.
456 (mi_print_value_p): Replace 'type' argument with 'var'. Handle
457 pretty-printed varobjs.
458 (mi_cmd_var_list_children): Accept 'from' and 'to' arguments.
459 Emit "has_more" attribute.
460 (mi_cmd_var_evaluate_expression): Plug memory leak.
461 (mi_cmd_var_assign): Likewise.
462 (varobj_update_one): Likewise. Emit "dynamic", "has_more", and
463 "new_children" attributes.
464 (mi_cmd_enable_pretty_printing): New function.
465 (mi_cmd_var_set_update_range): Likewise.
467 2009-09-15 Doug Evans <dje@google.com>
469 * dwarf2expr.h (dwarf_value_location): Add more comments describing
471 (struct dwarf_stack_value): New struct.
472 (struct dwarf_expr_context): Change type of `stack' from CORE_ADDR*
473 to struct dwarf_stack_value*.
474 (struct dwarf_expr_piece): Move `v.value' into its own struct, v.expr,
475 all uses updated. Add v.expr.in_stack_memory.
476 (dwarf_expr_push): Update declaration.
477 (dwarf_expr_fetch_in_stack_memory): Declare.
478 * dwarf2expr.c (dwarf_expr_grow_stack): Update calculation of
480 (dwarf_expr_push): New arg in_stack_memory, all callers updated.
481 (dwarf_expr_fetch_in_stack_memory): New function.
482 (add_piece): Set in_stack_memory for non-literal values.
483 (execute_stack_op): Allow ops to specify whether the value is on the
485 (execute_stack_op, case DW_OP_fbreg): Mark value as in stack memory.
486 (execute_stack_op, case DW_OP_call_frame_cfa): Ditto.
487 (execute_stack_op, case DW_OP_dup): Copy in_stack_memory flag.
488 (execute_stack_op, cases DW_OP_pick, DW_OP_over): Ditto.
489 (execute_stack_op, cases DW_OP_swap, DW_OP_rot): Update type of
491 * dwarf2loc.c (read_pieced_value): Call read_stack for values known
492 to be on the program's stack.
493 (dwarf2_evaluate_loc_desc, case DWARF_VALUE_MEMORY): Call
494 set_value_stack only for objects known to be in stack memory.
495 * dwarf2-frame.c (execute_stack_op): New arg initial_in_stack_memory,
498 * target.c (memory_xfer_partial): Pass correct length to dcache_update.
500 2009-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
502 Fix gcc-4.5 HEAD warnings for enum ada_operator.
503 * Makefile.in (HFILES_NO_SRCDIR): Add ada-operator.inc.
504 * ada-lang.h (enum ada_operator): Move it to ...
505 * ada-operator.inc: ... a new file.
506 * expression.h (enum exp_opcode): Include ada-operator.inc.
507 New element OP_UNUSED_LAST. Update comment for OP_EXTENDED0.
509 Fix gcc-4.5 HEAD warnings for GDB_FORM_cached_string.
510 * dwarf2read.c (GDB_FORM_cached_string)
511 (dwarf_form_name <GDB_FORM_cached_string>): Remove.
512 (struct attribute <dwarf_form>): Reduce the bit width.
513 (struct attribute <string_is_canonical>, DW_STRING_IS_CANONICAL): New.
514 (read_attribute_value <DW_FORM_string>)
515 (read_attribute_value <DW_FORM_strp>): Initialize
516 DW_STRING_IS_CANONICAL.
517 (dwarf2_name, dump_die_shallow <DW_FORM_string>)
518 (dump_die_shallow <DW_FORM_strp>): Update the code using former
519 GDB_FORM_cached_string.
521 2009-09-14 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
523 * amd64-linux-tdep.c: Include xml-syscall.h header, define the XML
524 syscall name for the architecture.
525 (amd64_linux_get_syscall_number): New function.
526 (amd64_linux_init_abi): Register the correct functions for syscall
527 catchpoint; set the correct syscall file name.
528 * breakpoint.c: New include: xml-syscall.h.
529 (set_raw_breakpoint_without_location): Setting the parameters
530 for the catch syscall feature.
531 (insert_catch_syscall): New.
532 (remove_catch_syscall): New.
533 (breakpoint_hit_catch_syscall): New.
534 (print_it_catch_syscall): New.
535 (print_one_catch_syscall): New.
536 (print_mention_catch_syscall): New.
537 (catch_syscall_breakpoint_ops): New.
538 (syscall_catchpoint_p): New.
539 (create_catchpoint_without_mention): New.
540 (create_catchpoint): Modified in order to use
541 create_catchpoint_without_mention.
542 (create_syscall_event_catchpoint): New.
543 (clean_up_filters): New.
544 (catch_syscall_split_args): New.
545 (catch_syscall_command_1): New.
546 (delete_breakpoint): Add cleanup for catch syscall.
547 (is_syscall_catchpoint_enabled): New.
548 (catch_syscall_enabled): New.
549 (catching_syscall_number): New.
550 (catch_syscall_completer): New completer function.
551 (add_catch_command): Add the completer function for catchpoints.
552 * breakpoint.h (syscalls_to_be_caught): New vector.
553 (catch_syscall_enabled): New.
554 (catching_syscall_number): New.
555 * gdbarch.c: Regenerated.
556 * gdbarch.h: Regenerated.
557 * gdbarch.sh: Add syscall catchpoint functions and structures.
558 (get_syscall_number): New.
559 (UNKNOWN_SYSCALL): New definition.
560 * i386-linux-nat.c (i386_linux_resume): Select the proper request
561 to be made for ptrace() considering if we are catching syscalls
563 * i386-linux-tdep.c: Include xml-syscall.h header, define the XML
564 syscall name for the architecture.
565 (i386_linux_get_syscall_number): New.
566 (i386_linux_init_abi): Register the correct functions for syscall
567 catchpoint; set the correct syscall file name.
568 * inf-child.c (inf_child_set_syscall_catchpoint): New.
569 (inf_child_target): Assign default values to target_ops.
570 * inf-ptrace.c (inf_ptrace_resume): Select the proper request
571 to be made for ptrace() considering if we are catching syscalls
573 * inferior.h (struct inferior): Included new variables
574 any_syscall_count, syscalls_counts and total_syscalls_count,
575 used to keep track of requested syscall catchpoints.
576 * infrun.c (resume): Add syscall catchpoint.
577 (deal_with_syscall_event): New.
578 (handle_inferior_event): Add syscall entry/return events.
579 (inferior_has_called_syscall): New.
580 * linux-nat.c: Define some helpful variables to track wether we have
581 support for the needed ptrace option.
582 (linux_test_for_tracesysgood): New.
583 (linux_supports_tracesysgood): New.
584 (linux_enable_tracesysgood): New.
585 (linux_enable_event_reporting): Save the current used ptrace
587 (linux_child_post_attach): Calling linux_enable_tracesysgood.
588 (linux_child_post_startup_inferior): Likewise.
589 (linux_child_set_syscall_catchpoint): New function.
590 (linux_handle_extended_wait): Handle the case which the inferior stops
591 because it has called or returned from a syscall.
592 (linux_target_install_ops): Install the necessary functions to handle
594 * linux-nat.h (struct lwp_info): Include syscall_state into the
595 structure, which indicates if we are in a syscall entry or return.
596 * ppc-linux-tdep.c: Include xml-syscall.h header, define the XML
597 syscall filename for the arch.
598 (ppc_linux_get_syscall_number): New.
599 (ppc_linux_init_abi): Register the correct functions for syscall
600 catchpoint; setting the correct name for the XML syscall file.
601 * target.c (update_current_target): Update/copy functions related to
603 (target_waitstatus_to_string): Add syscall catchpoint entry/return
605 * target.h (struct target_waitstatus): Add syscall number.
606 (struct syscall): New struct to hold information about syscalls
608 (struct target_ops): Add ops for syscall catchpoint.
609 (inferior_has_called_syscall): New.
610 (target_set_syscall_catchpoint): New.
611 * xml-support.c (xml_fetch_content_from_file): New function,
612 transferred from xml-tdesc.c.
613 * xml-support.h (xml_fetch_content_from_file): New.
614 * xml-tdesc.c (fetch_xml_from_file): Function removed;
615 transferred to xml-support.c.
616 (file_read_description_xml): Updated to use the new
617 xml_fetch_content_from_file function.
618 * syscalls/gdb-syscalls.dtd: New definition file for syscall's XML
620 * syscalls/amd64-linux.xml: New file containing information about
621 syscalls for GNU/Linux systems that use amd64 architecture.
622 * syscalls/i386-linux.xml: New file containing information about
623 syscalls for GNU/Linux systems that use i386 architecture.
624 * syscalls/ppc-linux.xml: New file containing information about
625 syscalls for GNU/Linux systems that use PPC architecture.
626 * syscalls/ppc64-linux.xml: New file containing information about
627 syscalls for GNU/Linux systems that use PPC64 architecture.
628 * xml-syscall.c: New file containing functions for manipulating
630 * xml-syscall.h: New file, exporting the functions above mentioned.
631 * Makefile.in: Support for relocatable GDB datadir and XML
633 * NEWS: Added information about the catch syscall feature.
635 2009-09-14 Doug Evans <dje@google.com>
637 * target.c (memory_xfer_partial): Only update dcache after we know
640 2009-09-14 Paul Pluzhnikov <ppluzhnikov@google.com>
642 *minsyms.c (lookup_minimal_symbol_by_pc_section_1): Assert non-NULL
644 (lookup_minimal_symbol_by_pc_section): Check for NULL section.
645 (lookup_minimal_symbol_by_pc): Adjust.
647 2009-09-14 Paul Pluzhnikov <ppluzhnikov@google.com>
649 * objfiles.c (qsort_cmp): Remove asserts.
650 (insert_section_p, filter_debuginfo_sections): New function.
651 (filter_overlapping_sections): Likewise.
652 (update_section_map): Adjust.
654 2009-09-13 Daniel Jacobowitz <dan@codesourcery.com>
656 * frame.c (get_frame_id): Default to outer_frame_id if the this_id
657 method does not supply an ID. Assert that the result is not
659 (outer_frame_id): New.
660 (frame_id_p): Accept outer_frame_id.
661 (frame_id_eq): Allow outer_frame_id to be equal to itself.
662 (frame_find_by_id): Revert previous local workarounds.
663 (get_prev_frame_1): Adjust end-of-stack check to test outer_frame_id.
664 * frame.h (null_frame_id, frame_id_p): Update comments.
665 (outer_frame_id): Declare.
666 * infrun.c (handle_inferior_event): Do not treat all steps from the
667 outermost frame as subroutine calls.
669 * libunwind-frame.c (libunwind_frame_this_id): Do not clear THIS_ID.
670 * hppa-tdep.c (hppa_stub_frame_this_id): Likewise.
671 * ia64-tdep.c (ia64_frame_this_id): Likewise.
672 (ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id):
673 Use outer_frame_id instead of null_frame_id.
674 * amd64obsd-tdep.c (amd64obsd_trapframe_cache): Use outer_frame_id.
675 * i386obsd-tdep.c (i386obsd_trapframe_cache): Likewise.
676 * inline-frame.c (inline_frame_this_id): Refuse outer_frame_id.
677 * thread.c (restore_selected_frame): Update comment and remove
680 2009-09-11 Doug Evans <dje@google.com>
682 * dwarf2expr.c (execute_stack_op, case DW_OP_piece): Delete unused
683 local addr_or_regnum.
685 * objfiles.c (struct objfile_data): Delete member cleanup and replace
687 (register_objfile_data_with_cleanup): Delete arg cleanup and replace
688 with save, free. All callers updated.
689 (clear_objfile_data): Replace cleanup loop with separate save and
691 * objfiles.h (register_objfile_data_with_cleanup): Update.
692 * arm-tdep.c (arm_objfile_data_free): Renamed from
693 arm_objfile_data_cleanup, all callers updated.
694 * dwarf2read.c (dwarf2_per_objfile_free): Renamed from
695 dwarf2_per_objfile_cleanup, all callers updated.
696 * python/py-objfile.c (py_free_objfile): Renamed from clean_up_objfile,
698 * python/py-type.c (save_objfile_types): Renamed from
699 clean_up_objfile_types, all callers updated.
701 2009-09-11 Tom Tromey <tromey@redhat.com>
703 * dwarf2loc.c (struct piece_closure) <arch>: New field.
704 (dwarf2_evaluate_loc_desc): Update.
705 (dwarf2_loc_desc_needs_frame): Likewise.
706 (allocate_piece_closure): Initialize new field.
707 (read_pieced_value): Update.
708 (write_pieced_value): Update.
709 (copy_pieced_value_closure): Update.
710 * dwarf2expr.h (enum dwarf_value_location): New.
711 (struct dwarf_expr_context) <in_reg>: Remove.
712 <location, len, data>: New fields.
713 (struct dwarf_expr_piece) <in_reg, value>: Remove.
714 <location, v>: New fields.
715 * dwarf2expr.c (add_piece): Remove in_reg, value arguments.
717 (require_composition): New function.
718 (execute_stack_op): Update.
719 <DW_OP_implicit_value, DW_OP_stack_value>: New cases.
720 <DW_OP_reg0>: Set location, not in_reg.
721 <DW_OP_regx>: Likewise. Use require_composition.
722 <DW_OP_fbreg>: Update.
723 <DW_OP_piece>: Likewise.
724 * dwarf2-frame.c (execute_stack_op): Update.
726 2009-09-10 Anthony Green <green@moxielogic.com>
728 * moxie-tdep.c (moxie_analyze_prologue): Recognize new prologue
731 2009-09-10 Michael Snyder <msnyder@vmware.com>
733 * remote.c (PACKET_bc, PACKET_bs): New enums.
734 (remote_protocol_features): Add ReverseStep, ReverseContinue.
735 (remote_resume): Check for reverse capability.
736 (_initialize_remote): Add packet config for "bs" and "bc" packets.
737 * NEWS (new options): Mention set/show for "bs" and "bc" packets.
739 2009-09-10 Joel Brobecker <brobecker@adacore.com>
741 * top.c (interactive_mode): New static variable.
742 (show_interactive_mode): New function.
743 (input_from_terminal_p): If interactive_mode is not auto, then
744 use that rather than checking the stdin settings.
745 (init_main): Add "set/show interactive-mode" command.
746 * NEWS: Add entry for new "set/show interactive-mode" command.
748 2009-09-10 Joel Brobecker <brobecker@adacore.com>
750 * configure.ac: Fix the names of the python source and object files
751 following the renaming done in an earlier change.
752 * configure: Regenerate.
754 2009-09-08 Joel Brobecker <brobecker@adacore.com>
756 Fix a build failure on AIX.
757 * rs6000-nat.c (vmap_exec): Rewrite using target_get_section_table
758 instead of relying on the to_sections/to_section_end target_ops
759 field, since the latter have been removed in a previous patch.
761 2009-09-08 Thiago Jung Bauermann <thiago.bauermann@gmail.com>
763 * Makefile.in (py-cmd.o): Renamed from python-cmd.o. Updated
765 (py-frame.o): Renamed from python-frame.o. Updated references.
766 (py-function.o): Renamed from python-function.o. Updated references.
767 (py-objfile.o): Renamed from python-objfile.o. Updated references.
768 (py-prettyprint.o): Renamed from python-prettyprint.o. Updated
770 (py-type.o): Renamed from python-type.o. Updated references.
771 (py-utils.o): Renamed from python-utils.o. Updated references.
772 (py-value.o): Renamed from python-value.o. Updated references.
773 * py-cmd.c: Renamed from python-cmd.c.
774 * py-frame.c: Renamed from python-frame.c.
775 * py-function.c: Renamed from python-function.c.
776 * py-objfile.c: Renamed from python-objfile.c.
777 * py-prettyprint.c: Renamed from python-prettyprint.c.
778 * py-type.c: Renamed from python-type.c.
779 * py-utils.c: Renamed from python-utils.c.
780 * py-value.c: Renamed from python-value.c.
782 2009-09-08 Joel Brobecker <brobecker@adacore.com>
784 Avoid quadratic behavior when computing the value of a register.
785 * frame.c (frame_stash): New static constant.
786 (frame_stash_add, frame_stash_find, frame_stash_invalidate):
788 (get_frame_id): Minor reformatting. Add the frame to the frame stash.
789 (frame_find_by_id): Search the frame stash first before walking all
790 frames starting from te current_frame.
791 (reinit_frame_stash): Add call to frame_stash_invalidate ();
793 2009-09-08 Joel Brobecker <brobecker@adacore.com>
795 * block.c (contained_in): Return zero for nested functions.
796 * blockframe.c (block_innermost_frame): Delete unreferenced local
799 2009-09-08 Doug Evans <dje@google.com>
801 * target.c (initialize_targets): Fix thinko in stack_cache_enabled_p.
803 2009-09-08 Michael Snyder <msnyder@vmware.com>
805 * amd64-linux-tdep.h (enum amd64_syscall): New enum consts,
806 to replace literal consts used in amd64-linux-tdep.c
807 * linux-record.h (enum gdb_syscall): New enum consts, to replace
808 literal consts used in amd64-linux-tdep.c and linux-record.c.
809 * amd64-linux-tdep.c (amd64_canonicalize_syscall): New function,
810 translate from native amd64 Linux syscall id to internal gdb id.
811 (amd64_linux_syscall_record): Switch statement abstracted out
812 and replaced with a call to amd64_canonicalize_syscall.
813 * linux-record.c (record_linux_system_call): Replace literal
814 consts with enum consts.
815 * i386-linux-tdep.c (i386_canonicalize_syscall): New function,
816 trivially translate from native i386 Linux syscalls to gdb syscalls.
817 (i386_linux_intx80_sysenter_record):
819 2009-09-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
821 * gdb/Makefile.in (check//%): Parse 'config.status --version'
822 output to recreate the configuration from the testsuite directory,
823 rather than running 'config.status --recheck' from a different
824 build directory. Let configure do the recursion rather than
827 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
829 * ia64-tdep.c (ia64_memory_remove_breakpoint): Call do_cleanups
832 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
834 * ia64-tdep.c (ia64_memory_insert_breakpoint)
835 (ia64_memory_remove_breakpoint): Return immediately if any of memory
836 reads fail. Do not combine the VAL values.
838 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
840 Fix ia64 shadowing of breakpoints in multiple slots of a single bundle.
841 * ia64-tdep.c (ia64_memory_insert_breakpoint): New call
842 of make_show_memory_breakpoints_cleanup with parameter 0. Move the
843 reading of SHADOW_CONTENTS to this memory state point of code. Update
844 comment for the memory re-read.
846 2009-09-07 Michael Snyder <msnyder@vmware.com>
848 * record.c: Minor comment and white space fix-ups.
850 2009-09-07 Jan Kratochvil <jan.kratochvil@redhat.com>
852 * m68k-tdep.c (m68k_gdbarch_init): Allocate TDEP as cleared.
853 * sparc-tdep.c (sparc32_gdbarch_init): Allocate TDEP as cleared.
854 Remove explicit clearing of TDEP fields.
856 2009-09-06 Hui Zhu <teawater@gmail.com>
858 * i386-tdep.c (i386_record_check_override): Deleted.
859 (i386_record_lea_modrm): Ditto.
860 (i386_process_record): Ditto.
862 2009-09-05 Eli Zaretskii <eliz@gnu.org>
864 * config/djgpp/djconfig.sh: Fix for Autoconf 2.64.
865 * config/djgpp/config.sed: Fix for Autoconf 2.64.
867 2009-09-05 Hui Zhu <teawater@gmail.com>
869 * i386-tdep.c (i386_record_s): Add orig_addr.
870 (i386_record_check_override): New function.
871 (i386_record_lea_modrm): Call i386_record_check_override.
872 (i386_process_record): Ditto.
874 2009-09-03 Nathan Froyd <froydnj@codesourcery.com>
876 * dwarf2loc.c (struct piece_closure): New.
877 (allocate_piece_closure): New function.
878 (read_pieced_value): New function.
879 (write_pieced_value): New function.
880 (copy_pieced_value_closure): New function.
881 (free_pieced_value_closure): New function.
882 (pieced_value_funcs): Define.
883 (dwarf2_evaluate_loc_desc): Return a computed value for a variable
884 described with pieces.
886 2009-09-03 Pierre Muller <muller@ics.u-strasbg.fr>
887 Richard Earnshaw <rearnsha@arm.com>
889 * arm-tdep.c (displaced_write_reg): Replace call to abort by call
892 2009-09-02 Tom Tromey <tromey@redhat.com>
894 * frame.h (frame_unwinder_is): Declare.
895 * frame.c (frame_unwinder_is): New function.
896 * dwarf2loc.c: Include dwarf2-frame.h.
897 (dwarf_expr_frame_cfa): New function.
898 (dwarf2_evaluate_loc_desc): Use it.
899 (needs_frame_frame_cfa): New function.
900 (dwarf2_loc_desc_needs_frame): Use it.
901 * dwarf2expr.h (struct dwarf_expr_context) <get_frame_cfa>: New
903 * dwarf2expr.c (execute_stack_op) <DW_OP_call_frame_cfa>: New
905 * dwarf2-frame.h (dwarf2_frame_cfa): Declare.
906 * dwarf2-frame.c (no_get_frame_cfa): New function.
907 (execute_stack_op): Use it.
908 (dwarf2_frame_cfa): New function.
910 2009-09-02 Hui Zhu <teawater@gmail.com>
912 * record.c (record_resume): Change "signal" to "siggnal".
914 2009-09-01 Hui Zhu <teawater@gmail.com>
916 * record.c (record_resume): Change "siggnal" to "signal".
918 2009-09-01 Hui Zhu <teawater@gmail.com>
920 * record.c (record_resume_siggnal): Deleted.
921 (record_resume): Ditto.
922 (record_wait): Change record_resume_siggnal to
925 2009-08-31 Jacob Potter <jdpotter@google.com>
926 Doug Evans <dje@google.com>
928 Implement TARGET_OBJECT_STACK_MEMORY.
929 * NEWS: Add note on new "set stack-cache" option.
930 * corefile.c (read_stack): New function.
931 * dcache.c (dcache_struct): New member ptid.
932 (dcache_enable_p): Mark as obsolete.
933 (show_dcache_enabled_p): Flag option as deprecated.
934 (dcache_invalidate): Update ptid.
935 (dcache_invalidate_line): New function.
936 (dcache_read_line): No longer check cacheable attribute, stack
937 accesses get cached despite attribute.
938 (dcache_init): Set ptid.
939 (dcache_xfer_memory): Flush cache if from different ptid than before.
940 Update cache after write.
941 (dcache_update): New function.
942 (dcache_info): Report ptid.
943 (_initialize_dcache): Update text for `remotecache' to indicate it
945 * dcache.h (dcache_update): Declare.
946 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with
948 * frame-unwind.c (frame_unwind_got_memory): Ditto.
949 * gdbcore.h (read_stack): Declare.
950 * memattr.c (mem_enable_command): Call target_dcache_invalidate
951 instead of dcache_invalidate.
952 (mem_disable_command, mem_delete_command): Ditto.
953 * target.c (stack_cache_enabled_p_1): New static global.
954 (stack_cache_enabled_p): New static global.
955 (set_stack_cache_enabled_p): New function.
956 (show_stack_cache_enabled_p): New function.
957 (target_dcache): Make static.
958 (target_dcache_invalidate): New function.
959 (target_load, target_resume): Call target_dcache_invalidate
960 instead of dcache_invalidate.
961 (memory_xfer_partial): New arg object, all callers updated.
962 Check for existing inferior before calling dcache routines.
963 When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache.
964 (target_xfer_partial): Call memory_xfer_partial for
965 TARGET_OBJECT_STACK_MEMORY.
966 (target_read_stack): New function.
967 (initialize_targets): Install new option `stack-cache'.
968 * target.h: Remove #include of dcache.h.
969 (enum target_object): New value TARGET_OBJECT_STACK_MEMORY.
970 (target_dcache): Delete.
971 (target_dcache_invalidate): Declare.
972 (target_read_stack): Declare.
973 * top.c (prepare_execute_command): New function.
974 (execute_command): Call prepare_execute_command
975 instead of free_all_values.
976 * top.h (prepare_execute_command): Declare.
977 * valops.c (get_value_at): New function.
978 (value_at): Guts moved to get_value_at.
979 (value_at_lazy): Similarly.
980 (value_fetch_lazy): Call read_stack for stack values.
981 * value.c (struct value): New member `stack'.
982 (value_stack, set_value_stack): New functions.
983 * value.h (value_stack, set_value_stack): Declare.
984 * mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command
985 instead of free_all_values.
987 2009-08-29 Hui Zhu <teawater@gmail.com>
989 * i386-tdep.c (i386_process_record): Fix the error of string
990 ops instructions's handler.
992 2009-08-28 Doug Evans <dje@google.com>
994 * top.c (execute_command): Remove redundant comment.
996 2009-08-28 Daniel Jacobowitz <dan@codesourcery.com>
1000 * value.c (value_primitive_field): Do not save value_offset for
1002 (unpack_bits_as_long): Do not read an entire ULONGEST.
1004 2009-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1006 Support constant DW_AT_data_member_location by GCC PR debug/40659.
1008 (dwarf2_add_field <DW_TAG_member> <DW_AT_data_member_location>):
1009 Initialize BYTE_OFFSET to 0 by default. Explicitly check if
1011 (dwarf2_add_field <DW_TAG_inheritance> <DW_AT_data_member_location>)
1012 (read_common_block <DW_AT_data_member_location>): New variable
1013 byte_offset. Fix crash on non-DW_BLOCK ATTR values.
1015 2009-08-28 Hui Zhu <teawater@gmail.com>
1017 * record.c (record_list_release_next): Change the first
1018 record_reg to record_end.
1020 2009-08-27 Doug Evans <dje@google.com>
1022 * value.c (free_all_values): Tweak comment.
1024 * NEWS: Add note on "info sharedlibrary".
1025 Remove note on "set print symbol-loading".
1026 * main.c (captured_main): Pass !batch for from_tty when calling
1027 symbol_file_add_main.
1028 * objfiles.h (objfile_has_partial_symbols): Declare.
1029 (objfile_has_full_symbols): Declare.
1030 * objfiles.c (objfile_has_partial_symbols): New function.
1031 (have_partial_symbols): Use it.
1032 (objfile_has_full_symbols): New function.
1033 (have_full_symbols): Use it.
1034 * solib.c: Include interps.h.
1035 (solib_read_symbols): Back out patch of 2008-07-10.
1036 Add test for info_verbose for symbol loading messages for
1037 consistency with symfile.c.
1038 (info_sharedlibrary_command): Handle optional parameter of regex of
1039 libraries to list. Inform user of libraries without debugging info.
1040 Rewrite to use ui_out routines to format output.
1041 * symfile.c (print_symbol_loading): Delete.
1042 (symbol_file_add_with_addrs_or_offsets): Back out patch of 2008-07-10.
1043 Print "no debugging symbols found" only if from_tty || info_verbose;
1044 and only check file being loaded, not all files.
1045 (reread_symbols): Test file being loaded for whether it has symbols,
1047 (__initialize_symfile): Delete `set print symbol-loading'.
1048 * symfile.h (print_symbol_loading): Delete.
1050 2009-08-27 Jan Kratochvil <jan.kratochvil@redhat.com>
1052 * varobj.c (varobj_create): Error if the specified frame was not found
1055 2009-08-26 Michael Snyder <msnyder@vmware.com>
1057 * i386-tdep.c (i386_process_record): Break out of prefix loop
1058 if not amd64. Otherwise inc/dec instructions are lost.
1060 2009-08-25 Keith Seitz <keiths@redhat.com>
1062 * c-exp.y (yylex): Add cxx_only check for tokentab2 and tokentab3
1064 (tokentab3): Add cxx_only for DOT_STAR.
1066 2009-08-25 Pedro Alves <pedro@codesourcery.com>
1068 * inferior.c (print_inferior): Align columns left. Remove header
1069 for the the "current" column. Rename column "Id" to "Num".
1070 Rename column "PID" to "Description". Print if there's no selected
1073 2009-08-25 Jan Kratochvil <jan.kratochvil@redhat.com>
1075 Fix ia64 start crash when GDB built with -lmcheck.
1076 * ia64-tdep.c (ia64_gdbarch_init): Allocate TDEP as cleared. Remove
1077 specific clearing of TDEP SIGCONTEXT_REGISTER_ADDRESS and
1080 2009-08-24 Keith Seitz <keiths@redhat.com>
1082 * c-exp.y (tokentab3): Add new token, ARROW_STAR. Changed all users.
1083 (tokentab2): Add new token, DOT_STAR. Changed all users.
1085 2009-08-24 Keith Seitz <keiths@redhat.com>
1087 * symtab.c (default_make_symbol_completion_list): Keep
1088 ':', too, so that we can limit searches in namespaces
1091 2009-08-24 Tom Tromey <tromey@redhat.com>
1093 * python/python-value.c (valpy_richcompare): Don't return from
1096 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1098 * CONTRIBUTE: Bump documented Autoconf version.
1099 * configure.ac: Do not substitute datarootdir, htmldir,
1100 pdfdir, docdir. Do not process --with-datarootdir,
1101 --with-htmldir, --with-pdfdir, --with-docdir.
1102 * configure: Regenerate.
1104 * aclocal.m4: Regenerate.
1105 * config.in: Likewise.
1106 * configure: Likewise.
1107 * gnulib/Makefile.in: Likewise.
1109 * configure.ac: Use AC_USE_SYSTEM_EXTENSIONS instead of
1110 AC_GNU_SOURCE, AC_AIX, AC_ISC_POSIX.
1112 2009-08-21 Paul Pluzhnikov <ppluzhnikov@google.com>
1114 * objfiles.h (gdb_bfd_ref): New prototype.
1115 * objfiles.c (gdb_bfd_ref): New function.
1116 (allocate_objfile): Call it.
1117 (gdb_bfd_unref): Adjust assertion.
1118 * solib.c (solib_map_sections): Add reference.
1119 (symbol_add_stub): Don't add reference here.
1120 * symfile.c (reread_symbols): Add reference.
1122 2009-08-21 Ken Werner <ken@linux.vnet.ibm.com>
1123 Doug Evans <dje@google.com>
1125 * jit.c (jit_event_handler): Use paddress to print target addresses.
1126 Wrap printf string in _().
1128 2009-08-21 Doug Evans <dje@google.com>
1130 * jit.c (jit_read_descriptor): New arg gdbarch, all callers updated.
1131 (jit_read_code_entry, jit_register_code): Ditto.
1132 (jit_event_handler): Ditto.
1133 (jit_inferior_init): Renamed from previous jit_inferior_created_hook.
1134 (jit_inferior_created_hook, jit_breakpoint_re_set): New functions.
1135 (jit_inferior_created_observer): Renamed from
1136 jit_inferior_created_hook1, all callers updated.
1137 * jit.h (jit_breakpoint_re_set): Declare.
1138 (jit_event_handler): Update prototype.
1139 * breakpoint.c (breakpoint_re_set): Call jit_breakpoint_re_set instead
1140 of jit_inferior_created_hook.
1142 2009-08-21 Hui Zhu <teawater@gmail.com>
1144 * record.c (record_wait): Change the argument of
1145 record_beneath_to_wait to options.
1147 2009-08-20 Jacob Potter <jdpotter@google.com>
1149 Replace dcache with splay tree.
1150 Remove partially implemented writeback support.
1151 * dcache.c: Include splay-tree.h.
1152 (LINE_SIZE_POWER): Change from 5 to 6.
1153 (DCACHE_SIZE): Change from 64 to 4096.
1154 (ENTRY_INVALID, ENTRY_VALID, ENTRY_DIRTY): Delete.
1155 (state_chars): Delete.
1156 (struct dcache_block): Clean up; remove state and anydirty fields.
1157 (struct dcache_struct): Redefine as a splay tree and linked list.
1158 (last_cache): Make static.
1159 (dcache_invalidate, dcache_hit): Rewrite for new cache structure.
1160 (dcache_read_line, dcache_alloc): Rewrite for new cache structure.
1161 (dcache_write_line): Delete.
1162 (dcache_writeback): Delete.
1163 (dcache_peek_byte): Clean up; remove "invalid" state check.
1164 (dcache_poke_byte): Rewrite for new cache structure; clarify comment.
1165 (dcache_splay_tree_compare): New function.
1166 (dcache_init, dcache_free): Rewrite for new cache structure.
1167 (dcache_xfer_memory): Rewrite for new write-through cache structure.
1168 (dcache_print_line): New function.
1169 (dcache_info): Rewrite for new cache structure.
1170 (_initialize_dcache): Update "info dcache" help text.
1171 * dcache.h (dcache_xfer_memory): Update declaration.
1172 * target.c (memory_xfer_partial): Update calls to dcache_xfer_memory.
1174 2009-08-19 Reid Kleckner <reid@kleckner.net>
1176 Add interface for JIT code generation.
1177 * NEWS: Announce JIT interface.
1178 * Makefile.in (SFILES): Add jit.c.
1179 (HFILES_NO_SRCDIR): Add jit.h.
1180 (COMMON_OBS): Add jit.o.
1183 * breakpoint.h (enum bptype): Add bp_jit_event to enum.
1185 (update_breakpoints_after_exec): Delete jit breakpoints after exec.
1186 (bpstat_what): Update event table for bp_jit_event.
1187 (print_it_typical): Added case for bp_jit_event.
1188 (print_one_breakpoint_location): Added case for bp_jit_event.
1189 (allocate_bp_location): Added case for bp_jit_event.
1190 (mention): Added case for bp_jit_event.
1191 (delete_command): Added case for bp_jit_event.
1192 (breakpoint_re_set_one): Added case for bp_jit_event.
1193 (breakpoint_re_set): Added call to jit_inferior_created_hook.
1194 (create_jit_event_breakpoint): New.
1195 * infrun.c (handle_inferior_event): Add handler for jit event.
1196 (follow_exec): Add call to jit_inferior_created_hook.
1198 2009-08-19 Ulrich Weigand <uweigand@de.ibm.com>
1200 * value.c (enum internalvar_kind): Replace INTERNALVAR_SCALAR by
1201 INTERNALVAR_INTEGER and INTERNALVAR_POINTER.
1202 (union internalvar_data): Replace "scalar" member by "integer"
1204 (value_of_internalvar): Handle INTERNALVAR_INTEGER and
1205 INTERNALVAR_POINTER instead of INTERNALVAR_SCALAR.
1206 (get_internalvar_integer): Likewise.
1207 (set_internalvar): Likewise.
1208 (set_internalvar_integer): Likewise.
1209 (preserve_one_internalvar): Likewise.
1210 (value_from_pointer): Handle typedef'd pointer types.
1212 2009-08-18 Tom Tromey <tromey@redhat.com>
1214 * utils.c (add_internal_problem_command): Free set_doc and
1216 * remote.c (add_packet_config_cmd): Free set_doc and show_doc.
1217 * language.c (add_language): Free language_set_doc.
1219 2009-08-18 Tom Tromey <tromey@redhat.com>
1221 * Makefile.in (ALL_TARGET_OBS): Remove prologue-value.o, solib.o.
1223 2009-08-17 Ulrich Weigand <uweigand@de.ibm.com>
1225 * symfile.c (reread_symbols): Call objfiles_changed *before*
1226 calling clear_symtab_users.
1228 2009-08-17 Michael Snyder <msnyder@vmware.com>
1230 * amd64-tdep.c: Add a frame unwinder for function epilogues.
1231 (amd64_in_function_epilogue_p): New function.
1232 (amd64_epilogue_frame_sniffer): New function.
1233 (amd64_epilogue_frame_cache): New function.
1234 (amd64_epilogue_frame_this_id): New function.
1235 (amd64_epilogue_frame_unwind): New struct frame_unwind.
1236 (amd64_init_abi): Hook the new unwinder.
1238 * amd64-linux-tdep.c (amd64_linux_init_abi): Set gdbarch to use
1239 SVR4 method for skip_trampoline_code.
1241 2009-08-17 Pedro Alves <pedro@codesourcery.com>>
1243 * objfiles.c (objfile_relocate): Relocate the entry point before
1244 relocating the section offsets. Flush the section map before
1245 resetting breakpoints.
1247 2009-08-14 Doug Evans <dje@google.com>
1249 * symfile.c (find_separate_debug_file): Remove double free of
1252 2009-08-14 Pedro Alves <pedro@codesourcery.com>
1254 * top.c (any_thread_of): Delete.
1255 (kill_or_detach): Use any_thread_of_process.
1256 * top.c (print_inferior_quit_action): New.
1257 (quit_confirm): Rewrite to print info about all inferiors.
1258 * target.c (dispose_inferior): New.
1259 (target_preopen): Use it.
1261 2009-08-14 Pedro Alves <pedro@codesourcery.com>
1263 * ui-file.h (ui_file_xstrdup): Mention that the length argument
1265 * ui-file.c (ui_file_xstrdup): Don't dereference LENGTH if it is
1267 * aix-thread.c (aix_thread_extra_thread_info): Pass NULL as length
1268 parameter to ui_file_xstrdup.
1269 * arm-tdep.c (_initialize_arm_tdep): Ditto.
1270 * infrun.c (print_target_wait_results): Ditto.
1271 * language.c (add_language): Ditto.
1272 * linespec.c (cplusplus_error): Ditto.
1273 * remote.c (escape_buffer): Ditto.
1274 * typeprint.c (type_to_string): Ditto.
1275 * utils.c (error_stream): Ditto.
1276 * varobj.c (value_get_print_value): Ditto.
1277 * xtensa-tdep.c (xtensa_verify_config): Replace `dummy' local with
1278 `length' local. Pass it to ui_file_xstrdup, and avoid an strlen
1280 * gdbarch.sh (verify_gdbarch): Ditto.
1281 * gdbarch.c: Regenerate.
1282 * cli/cli-setshow.c (do_setshow_command): Pass NULL as length
1283 parameter to ui_file_xstrdup.
1284 * python/python-frame.c (frapy_str): Ditto.
1285 * python/python-type.c (typy_str): Use the length local instead of
1287 * python/python-value.c (valpy_str): Pass NULL as length parameter
1290 2009-08-13 Doug Evans <dje@google.com>
1292 * utils.c (gnu_debuglink_crc32): Store crc32_table as unsigned int
1293 instead of unsigned long.
1295 2009-08-13 Tom Tromey <tromey@redhat.com>
1297 * varobj.c (update_dynamic_varobj_children): Don't use
1299 * value.h: (preserve_one_value): Declare.
1300 (value_prepend_to_list, value_remove_from_list): Remove.
1301 * value.c (preserve_one_value): No longer static.
1302 (preserve_values): Call preserve_python_values.
1303 (value_prepend_to_list): Remove.
1304 (value_remove_from_list): Remove.
1305 * python/python.h (values_in_python): Don't declare.
1306 (preserve_python_values): Declare.
1307 * python/python-value.c (values_in_python): Change type. Move
1309 (struct value_object): Add struct tag.
1310 <next, prev>: New fields.
1311 (valpy_dealloc): Update.
1312 (note_value): New function.
1313 (valpy_new): Use value_incref, note_value.
1314 (preserve_python_values): New function.
1315 (valpy_positive): Don't use value_copy.
1316 (value_to_value_object): Use value_incref, note_value.
1317 (convert_value_from_python): Update comment.
1319 2009-08-13 Pedro Alves <pedro@codesourcery.com>
1321 * remote.c (remote_pid_to_str): If printing a process id and we
1322 don't know what the remote pid could be, output "Remote target";
1323 otherwise, use normal_pid_to_str.
1325 2009-08-13 Tom Tromey <tromey@redhat.com>
1327 * language.h (longest_raw_hex_string): Remove unused declaration.
1329 2009-08-13 Pedro Alves <pedro@codesourcery.com>
1333 * language.c (language, type, range, case_sensitive): Make const.
1334 (show_language_command): Don't call deprecated_show_value_hack.
1335 Special case "auto".
1336 (set_language_command): An unrecognized language is now an
1337 internal error instead of a user error. Don't call set_lang_str.
1338 (show_type_command): Don't call deprecated_show_value_hack.
1339 Special case "auto". Use warning.
1340 (set_type_command): An unrecognized type is now an internal error
1341 instead of a user error. Output type check mismatch with language
1342 here. Don't call set_type_str.
1343 (show_range_command): Don't call deprecated_show_value_hack.
1344 Special case "auto". Use warning.
1345 (set_range_command): An unrecognized range check is now an
1346 internal error instead of a warning. Output range check mismatch
1347 with language here. Don't call set_range_str.
1348 (show_case_command): Don't call deprecated_show_value_hack.
1349 Special case "auto". Use warning.
1350 (set_case_command): Don't call set_case_str. An unrecognized case
1351 check is now an internal error instead of a warning. Output range
1352 check mismatch with language here. Don't call set_case_str.
1353 (set_type_range_case): Don't call set_type_str, set_range_str or
1355 (set_lang_str, set_type_str, set_range_str, set_case_str): Delete.
1356 (add_language): Install or reinstall the "set language" command
1357 here, and make it an enum command. Build the enumeration and the
1358 help string from the current list of known languages.
1359 (_initialize_language): Don't install "set language" here. Make
1360 "set check type", "set check range" and "set case-sensitive" enum
1361 commands. Register the "auto" "local" and "unknown" languages in
1364 2009-08-13 Pedro Alves <pedro@codesourcery.com>
1366 Revert 2009-08-07 changes for PR gdb/8869:
1368 * language.c (set_language_command): Strip whitespace.
1369 (set_type_command): Likewise.
1370 (set_range_command): Likewise.
1372 * language.c (language_completer): New function.
1373 (range_or_type_completer): New function.
1374 (case_completer): New function.
1375 (_initialize_language): Set completers.
1376 * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
1378 (add_setshow_string_noescape_cmd): Likewise.
1379 (add_setshow_integer_cmd): Likewise.
1380 (add_setshow_uinteger_cmd): Likewise.
1381 (add_setshow_zinteger_cmd): Likewise.
1382 (add_setshow_zuinteger_cmd): Likewise.
1383 * command.h (add_setshow_string_cmd,
1384 add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
1385 add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
1387 2009-08-12 Michael Snyder <msnyder@vmware.com>
1389 * remote.c (remote_add_inferior): Remove unused local.
1390 (remote_add_thread): Ditto.
1392 (remote_current_thread): Ditto.
1393 (remote_stop_ns): Ditto.
1394 (remote_parse_stop_reply): Ditto.
1395 (remote_get_pending_stop_replies): Ditto.
1396 (remote_wait_ns): Ditto.
1397 (remote_wait_as): Ditto.
1398 (send_g_packet): Ditto.
1399 (remote_fetch_registers): Ditto.
1400 (store_register_using_P): Ditto.
1401 (remote_store_registers): Ditto.
1402 (remote_remove_breakpoint): Ditto.
1403 (remote_write_qxfer): Ditto.
1404 (remote_read_qxfer): Ditto.
1406 2009-08-11 Tom Tromey <tromey@redhat.com>
1408 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Make a cleanup.
1409 (dwarf2_loc_desc_needs_frame): Likewise.
1410 * dwarf2expr.h (make_cleanup_free_dwarf_expr_context): Declare.
1411 * dwarf2expr.c (free_dwarf_expr_context_cleanup): New function.
1412 (make_cleanup_free_dwarf_expr_context): Likewise.
1413 * dwarf2-frame.c (execute_stack_op): Make a cleanup.
1415 2009-08-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1417 * objfiles.c (gdb_bfd_unref): Use the bfd_usrdata accessor.
1418 * solib.c (symbol_add_stub): Likewise.
1419 * symfile.c (symfile_bfd_open): Assert BFD_USRDATA is NULL.
1421 2009-08-10 Paul Pluzhnikov <ppluzhnikov@google.com>
1423 * objfiles.c (qsort_cmp): Remove assert.
1424 (preferred_obj_section): New function.
1425 (update_section_map): Filter duplicates.
1427 2009-08-10 Tristan Gingold <gingold@adacore.com>
1429 * solib-darwin.c (find_program_interpreter): Simplify the code by
1430 looking up for the load_dylinker command instead of reading the
1431 corresponding (but deprecated) section.
1432 (darwin_solib_create_inferior_hook): Adjust: do not free the
1435 2009-08-10 Tristan Gingold <gingold@adacore.com>
1437 * i386-darwin-tdep.c (i386_m128_p): New function.
1438 (i386_darwin_arg_type_alignment): Ditto.
1439 (i386_darwin_push_dummy_call): Ditto.
1440 (i386_darwin_init_abi): Define Darwin specific push_dummy_call.
1441 Adjust long_double size. Adjust pc offset in setjump buffer.
1443 2009-08-10 Hui Zhu <teawater@gmail.com>
1445 Add Linux AMD64 process record support.
1447 * amd64-linux-tdep.c (amd64_linux_record_tdep): New variable.
1448 This struct has the argument for the function
1449 "record_linux_system_call".
1450 (amd64_linux_syscall_record): New function. Parse the
1451 system call instruction and call function
1452 "record_linux_system_call" to record execute log.
1453 (i386_linux_init_abi): Initialize "amd64_linux_record_tdep".
1454 Set "amd64_linux_syscall_record" to "i386_syscall_record".
1456 2009-08-10 Hui Zhu <teawater@gmail.com>
1458 Add process record Linux system call 64 bits support.
1460 * linux-record.h (linux_record_tdep): Add size_pointer,
1461 size_size_t, size_iovec and arg6. Change the values of
1462 size_int, size_long and size_ulong to
1463 gdbarch_int_bit (gdbarch) / TARGET_CHAR_BIT,
1464 gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT,
1465 gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT.
1466 * i386-linux-tdep.c (i386_linux_init_abi): Ditto.
1467 (i386_linux_intx80_sysenter_record): Add a check for system
1469 * linux-record.c (record_linux_system_call): Make this
1470 function support 64 bits.
1472 2009-08-10 Hui Zhu <teawater@gmail.com>
1474 Add AMD64 process record instruction set support.
1476 * i386-tdep.h (gdbarch_tdep): Add record_regmap for registers
1477 because the AMD64's registers order in GDB is not same with
1479 Add i386_syscall_record to be the syscall function handle
1481 (record_i386_regnum): Number for record_regmap.
1482 * i386-tdep.c (OT_QUAD): For 64 bits.
1483 (i386_record_s): Add rex_x, rex_b, rip_offset and
1484 popl_esp_hack for AMD64 instruction set. And regmap for
1486 (i386_record_lea_modrm_addr): Support AMD64 instruction set
1488 (i386_record_lea_modrm): Ditto.
1489 (i386_record_push): New function. Record the execution log
1491 (I386_RECORD_ARCH_LIST_ADD_REG): New macro to record the
1493 (i386_process_record): Support AMD64 instruction set.
1494 * amd64-tdep.c (amd64_record_regmap): For record_regmap.
1495 (amd64_init_abi): Set amd64_record_regmap to record_regmap.
1497 2009-08-08 Pedro Alves <pedro@codesourcery.com>
1499 * bfd-target.c (struct target_bfd_data): New.
1500 (target_bfd_xfer_partial): Adjust to get at the section table from
1502 (target_bfd_get_section_table): Ditto.
1503 (target_bfd_xclose): Ditto. Get the bfd pointer from the
1504 target_bfd_data structure, from the section table.
1505 (target_bfd_reopen): Store a struct target_bfd_data in the
1506 target_ops to_data field, instead of a target_section_table.
1508 2009-08-08 Aleksandar Ristovski <aristovski@qnx.com>
1509 Hui Zhu <teawater@gmail.com>
1511 * record.c (record_store_registers): Remove unused variable.
1513 2009-08-07 Tom Tromey <tromey@redhat.com>
1515 * language.c (set_language_command): Strip whitespace.
1516 (set_type_command): Likewise.
1517 (set_range_command): Likewise.
1519 2009-08-07 Tom Tromey <tromey@redhat.com>
1522 * language.c (language_completer): New function.
1523 (range_or_type_completer): New function.
1524 (case_completer): New function.
1525 (_initialize_language): Set completers.
1526 * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
1528 (add_setshow_string_noescape_cmd): Likewise.
1529 (add_setshow_integer_cmd): Likewise.
1530 (add_setshow_uinteger_cmd): Likewise.
1531 (add_setshow_zinteger_cmd): Likewise.
1532 (add_setshow_zuinteger_cmd): Likewise.
1533 * command.h (add_setshow_string_cmd,
1534 add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
1535 add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
1537 2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
1540 * dwarf2-frame.c (qsort_fde_cmp): Use stable sort.
1542 2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
1544 * dwarf2-frame.c (struct dwarf2_cie): Remove 'next'.
1545 (struct dwarf2_cie_table): New.
1546 (struct dwarf2_fde): Remove 'next'.
1547 (struct dwarf2_fde_table): New.
1548 (struct comp_unit): Remove 'cie'.
1549 (bsearch_cie_cmp, bsearch_fde_cmp): New function.
1550 (find_cie, dwarf2_frame_find_fde): Use bsearch.
1551 (add_cie, add_fde): Use array instead of linked list.
1552 (decode_frame_entry, decode_frame_entry_1): New parameters.
1553 (qsort_fde_cmp): New function.
1554 (dwarf2_build_frame_info): Adjust.
1556 2009-08-06 Don Lee <don.lee@sunplusct.com>
1558 * score-tdep.c: Support a new Sunplus CT S+core variant, S+core 3.
1559 * score-tdep.h: Ditto.
1561 * configure.tgt: Test do we have a simulator.
1562 * MAINTAINERS: Add myself under target score
1564 2009-08-06 Nick Roberts <nickrob@snap.net.nz>
1566 * utils.c (defaulted_query): Don't ask for confirmation if server
1569 2009-08-05 Tom Tromey <tromey@redhat.com>
1571 * spu-tdep.h (SPUADDR_SPU): Cast result to int.
1573 2009-08-04 Paul Pluzhnikov <ppluzhnikov@google.com>
1575 * objfiles.h (OBJF_KEEPBFD): Delete.
1576 (gdb_bfd_unref): New prototype.
1577 * objfiles.c (gdb_bfd_unref): New function.
1578 (free_objfile): Call gdb_bfd_unref.
1579 * solib.c (free_so): Likewise.
1580 (symbol_add_stub): Set refcount.
1582 2009-08-04 Hui Zhu <teawater@gmail.com>
1583 Michael Snyder <msnyder@vmware.com>
1585 * record.c (record_mem_entry): New field 'mem_entry_not_accessible'.
1586 (record_arch_list_add_mem): Initialize 'mem_entry_not_accessible'.
1587 (record_wait): Set 'mem_entry_not_accessible' flag if target
1588 memory not readable. Don't try to change target memory if
1589 'mem_entry_not_accessible' is set.
1591 2009-08-03 Richard Guenther <rguenther@suse.de>
1592 Jan Kratochvil <jan.kratochvil@redhat.com>
1594 Fix memory corruption on reread of file through a symbolic link.
1595 * symfile.c (find_separate_debug_file): Initialize CANON_NAME earlier.
1596 Allocate DEBUGFILE with length based on CANON_NAME. Free CANON_NAME on
1597 all the return paths.
1599 2009-08-03 Jim Ingham <jingham@apple.com>
1600 Vladimir Prus <vladimir@codesourcery.com>
1602 Implement -break-commands
1604 * breakpoint.c (get_breakpoint, breakpoint_set_commands): New.
1605 (commands_command): Use breakpoint_set_commands.
1606 * breakpoint.h (get_breakpoint, breakpoint_set_commands): Declare.
1608 * mi/mi-cmds.h (mi_cmd_break_commands): New.
1609 * mi/mi-cmds.c: Register -break-commands.
1610 * mi/mi-cmd-break.c (mi_cmd_break_commands, mi_read_next_line)
1611 (mi_command_line_array, mi_command_line_array_cnt)
1612 (mi_command_line_array_ptr): New.
1614 2009-08-03 Jim Ingham <jingham@apple.com>
1615 Vladimir Prus <vladimir@codesourcery.com>
1617 Refactor reading of commands
1619 * defs.h (read_command_lines_1): Declare.
1620 * cli/cli-script.c (read_next_line): Only return string,
1622 (process_next_line): New, extracted from read_next_line.
1623 (recurse_read_control_structure): Take a function pointer to the
1625 (get_command_line) Pass the read_next_line as reader function
1626 into recurse_read_control_structure.
1627 (read_command_lines_1): New, extracted from...
1628 (read_command_lines): ...here.
1630 2009-07-31 Kazu Hirata <kazu@codesourcery.com>
1632 * procfs.c (proc_set_current_signal): Populate mysinfo before
1634 (proc_clear_current_signal): Likewise.
1635 (proc_set_watchpoint): Populate pwatch before copying it to arg.
1637 2009-07-31 Michael Snyder <msnyder@vmware.com>
1639 * remote.c (store_register_using_P): Call putpkt and getpkt
1640 directly instead of calling remote_send.
1641 (store_registers_using_G): Ditto.
1642 (fetch_register_using_p): Ditto.
1644 * remote.c (store_register_using_P): Make error msg more verbose.
1645 (store_registers_using_G): Ditto.
1646 (fetch_register_using_p): Ditto.
1648 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1650 * spu-tdep.c: Include "infcall.h".
1651 (spu_address_class_type_flags): New function.
1652 (spu_address_class_type_flags_to_name): Likewise.
1653 (spu_address_class_name_to_type_flags): Likewise.
1654 (spu_pointer_to_address): Handle __ea pointers.
1655 (spu_auto_flush_cache_p): New static variable.
1656 (spu_objfile_from_frame): New function.
1657 (flush_ea_cache, spu_attach_normal_stop): Likewise.
1658 (show_spu_auto_flush_cache): Likewise.
1659 (spu_gdbarch_init): Install address class handlers.
1660 (_initialize_spu_tdep): Attach to normal_stop observer.
1661 Install "set spu auto-flush-cache" / "show spu auto-flush-cache"
1664 * NEWS: Mention "set/show spu auto-flush-cache" commands.
1666 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1668 * spu-tdep.c: Include "block.h".
1669 (setspucmdlist, showspucmdlist): New static variables.
1670 (spu_stop_on_load_p): Likewise.
1671 (spu_catch_start): New function.
1672 (show_spu_command, set_spu_command): New functions.
1673 (show_spu_stop_on_load): Likewise.
1674 (_initialize_spu_tdep): Attach spu_catch_start to new_objfile observer.
1675 Install "set spu" / "show spu" prefix command handler.
1676 Install "set spu stop-on-load" / "show spu stop-on-load" command.
1678 * NEWS: Mention "set/show spu stop-on-load" commands.
1680 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1682 * ppc-linux-tdep.c: Include "solib.h", "solist.h", "exceptions.h",
1683 "arch-utils.h", and "spu-tdep.h".
1684 (spu_context_objfile, spe_context_lm_addr, spe_context_offset):
1685 New static variables.
1686 (spe_context_cache_ptid, spe_context_cache_address): Likewise.
1687 (ppc_linux_spe_context_lookup): New function.
1688 (ppc_linux_spe_context_inferior_created): Likewise.
1689 (ppc_linux_spe_context_solib_loaded): Likewise.
1690 (ppc_linux_spe_context_solib_unloaded): Likewise.
1691 (ppc_linux_spe_context): Likewise.
1692 (struct ppu2spu_cache, struct ppu2spu_data): New data types.
1693 (ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register,
1694 ppu2spu_unwind_register, ppu2spu_sniffer,
1695 ppu2spu_dealloc_cache): New functions.
1696 (ppu2spu_unwind): New static variable.
1697 (ppc_linux_init_abi): Install cross-architecture unwinder.
1698 (_initialize_ppc_linux_tdep): Attach to observers.
1700 * spu-tdep.c (struct spu2ppu_cache): New data type.
1701 (spu2ppu_prev_arch, spu2ppu_this_id, spu2ppu_prev_register,
1702 spu2ppu_sniffer, spu2ppu_dealloc_cache): New functions.
1703 (spu2ppu_unwind): New static variable.
1704 (spu_gdbarch_init): Install cross-architecture unwinder.
1706 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1708 * target.h (enum strata): New value arch_stratum.
1709 * target.c (target_require_runnable): Skip arch_stratum targets.
1711 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
1712 solib-spu.o and spu-multiarch.o to gdb_target_obs.
1713 * Makefile.in (ALL_TARGET_OBS): Add solib-spu.o and spu-multiarch.o.
1714 (ALLDEPFILES): Add solib-spu.c and spu-multiarch.c.
1716 * solib-spu.c: New file.
1717 * solib-spu.h: New file.
1718 * spu-multiarch.c: New file.
1720 * spu-tdep.h (SPUADDR, SPUADDR_SPU, SPUADDR_ADDR): New macros.
1722 * spu-tdep.c (struct gdbarch_tdep): New member id.
1723 (spu_gdbarch_id): New function.
1724 (spu_lslr): New function.
1726 (spu_address_to_pointer): New function.
1727 (spu_pointer_to_address): Support SPU ID address encoding. Use
1728 spu_gdbarch_id and spu_lslr.
1729 (spu_integer_to_address): Likewise.
1730 (spu_frame_unwind_cache): Update for encoded addresses.
1731 (spu_unwind_pc, spu_unwind_sp): Likewise.
1732 (spu_read_pc, spu_write_pc): Likewise.
1733 (spu_push_dummy_call): Likewise.
1734 (spu_software_single_step): Likewise.
1735 (spu_get_longjmp_target): Likewise.
1736 (spu_overlay_update_osect): Likewise.
1738 (spu_dis_asm_print_address): New function.
1739 (gdb_print_insn_spu): Likewise.
1741 (spu_gdbarch_init): Store SPU ID in tdep structure.
1742 Install spu_address_to_pointer and gdb_print_insn_spu.
1744 * ppc-linux-tdep.c: Include "observer.h", "auxv.h", "elf/common.h"
1746 (ppc_linux_entry_point_addr): New static variable.
1747 (ppc_linux_inferior_created): New function.
1748 (ppc_linux_displaced_step_location): Likewise.
1749 (ppc_linux_init_abi): Enable Cell/B.E. support if supported
1751 (_initialize_ppc_linux_tdep): Attach to inferior_created observer.
1753 * NEWS: Mention multi-architecture and Cell/B.E. debugging
1756 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1758 * linux-nat.c: Include <sys/vfs.h>.
1759 (SPUFS_MAGIC): Define.
1760 (spu_enumerate_spu_ids): New function.
1761 (linux_proc_xfer_spu): New function.
1762 (linux_xfer_partial): Handle TARGET_OBJECT_SPU.
1764 (iterate_over_spus): New function.
1765 (struct linux_spu_corefile_data): New data type.
1766 (linux_spu_corefile_callback): New function.
1767 (linux_spu_make_corefile_notes): New function.
1768 (linux_nat_make_corefile_notes): Call it.
1770 * corelow.c (struct spuid_list): New data type.
1771 (add_to_spuid_list): New function.
1772 (core_xfer_partial): Handle TARGET_OBJECT_SPU.
1774 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1776 * features/Makefile: Allow sub-platform specific expedite settings.
1777 (WHICH): Add rs6000/powerpc-cell32l and rs6000/powerpc-cell64l.
1778 (rs6000/powerpc-cell32l-expedite): Define.
1779 (rs6000/powerpc-cell64l-expedite): Likewise.
1780 * features/rs6000/powerpc-cell32l.xml: New file.
1781 * features/rs6000/powerpc-cell64l.xml: New file.
1782 * features/rs6000/powerpc-cell32l.c: New generated file.
1783 * features/rs6000/powerpc-cell64l.c: New generated file.
1785 * regformats/rs6000/powerpc-cell32l.dat: New generated file.
1786 * regformats/rs6000/powerpc-cell64l.dat: New generated file.
1788 * config/djgpp/fnchange.lst: Add mappings for new files.
1790 * ppc-linux-tdep.h (tdesc_powerpc_cell32l): Add prototype.
1791 (tdesc_powerpc_cell64l): Likewise.
1792 * ppc-linux-tdep.c: Include "features/rs6000/powerpc-cell32l.c"
1793 and "features/rs6000/powerpc-cell64l.c".
1794 (_initialize_ppc_linux_tdep): Initialize target descriptions.
1795 (ppc_linux_spu_section): New function.
1796 (ppc_linux_core_read_description): Detect Cell/B.E. core files.
1797 * ppc-linux-nat.c (PPC_FEATURE_CELL): Define.
1798 (ppc_linux_read_description): Detect Cell/B.E. architecture.
1800 * rs6000-tdep.c (rs6000_gdbarch_init): Do not trust BFD wordsize
1801 if exec file is not PowerPC architecture.
1803 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1805 * features/gdb-target.dtd (target): Accept optional
1806 <compatible> elements.
1807 (compatible): Define element.
1809 * target-descriptions.h (tdesc_compatible_p): New.
1810 (tdesc_add_compatible): New.
1811 * target-descriptions.c (arch_p): New VEC_P type.
1812 (struct target_desc): New member compatible.
1813 (free_target_description): Handle it.
1814 (maint_print_c_tdesc_cmd): Likewise.
1815 (tdesc_compatible_p): New function.
1816 (tdesc_add_compatible): New function.
1818 * xml-tdesc.c (tdesc_end_compatible): New function.
1819 (target_children): Handle <compatible> element.
1821 * arch-utils.c (choose_architecture_for_target): Accept target
1822 description instead of BFD architecture as input. Query target
1823 description for compatible architectures.
1824 (gdbarch_info_fill): Update call.
1826 * NEWS: Mention <compatible> element of target descriptions.
1828 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1830 * breakpoint.c (remove_breakpoints): If removing one breakpoint
1831 location fails, still continue to remove other locations.
1832 (remove_hw_watchpoints): Likewise.
1833 (detach_breakpoints): Likewise.
1835 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1837 * breakpoint.h (enum enable_state): Add bp_startup_disabled.
1838 (disable_breakpoints_before_startup): Add prototype.
1839 (enable_breakpoints_after_startup): Likewise.
1841 * breakpoint.c (executing_startup): New static variable.
1842 (describe_other_breakpoints): Handle bp_startup_disabled.
1843 (check_duplicates_for): Likewise.
1844 (disable_breakpoints_before_startup): New function.
1845 (enable_breakpoints_after_startup): New function.
1846 (create_breakpoint): Mark new breakpoints as bp_startup_disabled
1847 if executing_startup flag is true.
1848 (break_command_really): Likewise.
1849 (breakpoint_re_set_one): Skip bp_startup_disabled breakpoints.
1851 2009-07-31 Julian Brown <julian@codesourcery.com>
1853 * arm-linux-tdep.c (arch-utils.h, inferior.h, gdbthread.h, symfile.h):
1855 (arm_linux_cleanup_svc, arm_linux_copy_svc): New.
1856 (cleanup_kernel_helper_return, arm_catch_kernel_helper_return): New.
1857 (arm_linux_displaced_step_copy_insn): New.
1858 (arm_linux_init_abi): Initialise displaced stepping callbacks.
1859 * arm-tdep.c (DISPLACED_STEPPING_ARCH_VERSION): New macro.
1861 (displaced_read_reg, displaced_in_arm_mode, branch_write_pc)
1862 (bx_write_pc, load_write_pc, alu_write_pc, displaced_write_reg)
1863 (insn_references_pc, copy_unmodified, cleanup_preload, copy_preload)
1864 (copy_preload_reg, cleanup_copro_load_store, copy_copro_load_store)
1865 (cleanup_branch, copy_b_bl_blx, copy_bx_blx_reg, cleanup_alu_imm)
1866 (copy_alu_imm, cleanup_alu_reg, copy_alu_reg)
1867 (cleanup_alu_shifted_reg, copy_alu_shifted_reg, cleanup_load)
1868 (cleanup_store, copy_extra_ld_st, copy_ldr_str_ldrb_strb)
1869 (cleanup_block_load_all, cleanup_block_store_pc)
1870 (cleanup_block_load_pc, copy_block_xfer, cleanup_svc, copy_svc)
1871 (copy_undef, copy_unpred): New.
1872 (decode_misc_memhint_neon, decode_unconditional)
1873 (decode_miscellaneous, decode_dp_misc, decode_ld_st_word_ubyte)
1874 (decode_media, decode_b_bl_ldmstm, decode_ext_reg_ld_st)
1875 (decode_svc_copro, arm_process_displaced_insn)
1876 (arm_displaced_init_closure, arm_displaced_step_copy_insn)
1877 (arm_displaced_step_fixup): New.
1878 (arm_gdbarch_init): Initialise max insn length field.
1879 * arm-tdep.h (DISPLACED_TEMPS, DISPLACED_MODIFIED_INSNS): New
1881 (displaced_step_closure, pc_write_style): New.
1882 (arm_displaced_init_closure, displaced_read_reg)
1883 (arm_process_displaced_insn, arm_displaced_init_closure)
1884 (displaced_read_reg, displaced_write_reg, arm_displaced_step_copy_insn)
1885 (arm_displaced_step_fixup): Add prototypes.
1887 2009-07-31 Pedro Alves <pedro@codesourcery.com>
1888 Julian Brown <julian@codesourcery.com>
1890 * infrun.c (displaced_step_fixup): If this is a software
1891 single-stepping arch, don't tell the target to single-step.
1892 (maybe_software_singlestep): Return 0 if we're using displaced
1894 (resume): If this is a software single-stepping arch, and
1895 displaced-stepping is enabled, use it for all single-step
1898 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1900 * Makefile.in (ACLOCAL, ACLOCAL_AMFLAGS, aclocal_m4_deps)
1901 (AUTOCONF, configure_deps, AUTOHEADER): New variables.
1902 ($(srcdir)/aclocal.m4, $(srcdir)/configure, $(srcdir)/config.in)
1903 (am--refresh): New rules.
1904 (stamp-h, config.status): List config.in and configure including
1906 * aclocal.m4: Regenerate.
1907 * configure: Regenerate.
1909 2009-07-30 Thomas Schwinge <tschwinge@gnu.org>
1911 * gnu-nat.c (add_task_commands) <stopped>: Register the correct
1914 2009-07-30 H.J. Lu <hongjiu.lu@intel.com>
1916 * ia64-tdep.c (ia64_access_reg): Correct paddress.
1918 2009-07-30 Jan Kratochvil <jan.kratochvil@redhat.com>
1920 Replace public function varobj_list by all_root_varobjs iterator.
1921 * mi/mi-cmd-var.c (struct mi_cmd_var_update, mi_cmd_var_update_iter):
1923 (mi_cmd_var_update): Replace the varobj_list call by all_root_varobjs.
1924 Remove the variables rootlist, cr. New variable data.
1925 * varobj.c (rootcount, varobj_list): Remove.
1926 (install_variable, uninstall_variable): Remove the rootcount updates.
1927 (all_root_varobjs): New function.
1928 (varobj_invalidate): Use the all_root_varobjs call. Move the code to...
1929 (varobj_invalidate_iter): ... a new function.
1930 * varobj.h (varobj_list): Remove the prototype.
1931 (all_root_varobjs): New prototype.
1933 2009-07-29 Paul Pluzhnikov <ppluzhnikov@google.com>
1936 * dbxread.c (read_dbx_symtab): Reduce stack use.
1938 2009-07-29 Jan Kratochvil <jan.kratochvil@redhat.com>
1940 Fix gcc-4.5 HEAD warnings.
1941 * cp-name-parser.y (%union <typed_val_int>, %token GLOBAL)
1942 (GLOBAL_CONSTRUCTORS, GLOBAL_DESTRUCTORS, demangler_special <GLOBAL>):
1944 (yylex <"global constructors keyed to ">)
1945 (yylex <"global destructors keyed to ">): Base it on DEMANGLER_SPECIAL.
1946 (cp_comp_to_string): Remove variables str, prefix and buf. Remove the
1947 GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS handling.
1948 (cp_print): Remove the GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS
1951 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
1953 * NEWS: Mention ARM VFP support.
1954 * target-descriptions.c (tdesc_register_type): Make public.
1955 (tdesc_unnumbered_register): New function.
1956 (tdesc_register_reggroup_p): Allow missing
1957 pseudo_register_reggroup_p.
1958 * target-descriptions.h (tdesc_register_type): Declare.
1959 (tdesc_unnumbered_register): Declare.
1960 * arm-tdep.c (arm_neon_quad_read, arm_neon_quad_write): New functions.
1961 (arm_push_dummy_call): Use arm_neon_quad_write.
1962 (arm_neon_double_type, arm_neon_quad_type): New functions.
1963 (arm_register_type): Handle VFP and NEON registers. Override the
1964 types of double-precision registers for NEON. Disable FPA registers
1965 if they are not present.
1966 (arm_dwarf_reg_to_regnum): Add current VFP and NEON register numbers.
1967 (arm_return_value): Use arm_neon_quad_write and arm_neon_quad_read.
1968 (arm_register_name): Handle VFP single and NEON quad registers.
1969 (arm_pseudo_read, arm_pseudo_write): New functions.
1970 (arm_gdbarch_init): Check for VFP and NEON in the target description.
1971 Assign numbers to double-precision registers. Register VFP and NEON
1972 pseudo registers. Remove a shadowed "i" variable.
1973 * arm-tdep.h (enum gdb_regnum): Add ARM_D0_REGNUM and
1975 (struct gdbarch_tdep): Add have_neon_pseudos, have_neon,
1976 have_vfp_registers, have_vfp_pseudos, neon_double_type,
1979 * features/Makefile: Make expedite settings only architecture
1981 (WHICH): Add new ARM descriptions.
1982 * features/arm-with-neon.xml, features/arm-with-vfpv2.c,
1983 features/arm-with-vfpv3.c, features/arm-vfpv2.xml,
1984 features/arm-vfpv3.xml, features/arm-with-vfpv2.xml,
1985 features/arm-with-vfpv3.xml, features/arm-with-neon.c: New files.
1986 * regformats/arm-with-neon.dat, regformats/arm-with-vfpv2.dat,
1987 regformats/arm-with-vfpv3.dat: Generate.
1989 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
1991 * infrun.c (handle_inferior_event): Clear trap_expected after
1992 stepping past a single-step breakpoint.
1994 2009-07-28 Joseph Myers <joseph@codesourcery.com>
1996 * arm-tdep.c (enum arm_vfp_cprc_base_type,
1997 arm_vfp_cprc_unit_length, arm_vfp_cprc_reg_char,
1998 arm_vfp_cprc_sub_candidate, arm_vfp_call_candidate,
1999 arm_vfp_abi_for_function): New.
2000 (arm_push_dummy_call): Handle VFP ABI.
2001 (arm_extract_return_value, arm_store_return_value): Handle
2003 (arm_return_value): Handle VFP ABI.
2004 (arm_gdbarch_init): Default fp_model based on Tag_ABI_VFP_args for
2007 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
2009 * arch-utils.c (displaced_step_at_entry_point): Do not call
2010 gdbarch_convert_from_func_ptr_addr.
2011 * cris-tdep.c: Remove outdated comment.
2012 * infcall.c (call_function_by_hand): Do not call
2013 gdbarch_convert_from_func_ptr_addr after entry_point_address.
2014 * objfiles.c (entry_point_address): Call both
2015 gdbarch_convert_from_func_ptr_addr and
2016 gdbarch_addr_bits_remove.
2018 2009-07-28 Aleksandar Ristovski <aristovski@qnx.com>
2020 * nto-tdep.c (nto_thread_state_str): New array.
2021 (nto_extra_thread_info): New function definition.
2022 * nto-tdep.h (gdbthread.h): New include.
2023 (private_thread_info): New struct.
2024 (nto_extra_thread_info): New declaration.
2025 * nto-procfs.c (procfs_thread_alive): Properly check if
2026 thread is still alive.
2027 (update_thread_private_data_name, update_thread_private_data): New
2028 function definition.
2029 (procfs_find_new_threads): Fetch thread private data.
2030 (init_procfs_ops): Register to_extra_thread_info.
2032 2009-07-25 Pedro Alves <pedro@codesourcery.com>
2034 * stack.c (backtrace_command_1): Remove dead check of NULL current
2037 2009-07-23 Keith Seitz <keiths@redhat.com>
2039 * source.c (forward_search_command): Don't fclose the stream,
2040 just run the cleanups.
2041 (reverse_search_command): Likewise.
2043 2009-07-23 Paul Pluzhnikov <ppluzhnikov@google.com>
2045 * symtab.c (search_symbols): Add QUIT.
2047 2009-07-22 Paul Pluzhnikov <ppluzhnikov@google.com>
2049 * symfile.c (symbol_file_add_with_addrs_or_offsets): Call observer.
2051 2009-07-22 Paul Pluzhnikov <ppluzhnikov@google.com>
2053 * objfiles.h (objfiles_changed): New prototype.
2054 * objfiles.c (objfiles_updated_p): Rename to objfiles_changed_p.
2055 (allocate_objfile, free_objfile): Must rebuild section map.
2056 (objfile_relocate): Likewise.
2057 (update_section_map, find_pc_section): Adjust.
2058 (set_objfiles_updated_on_exe_change): Remove.
2059 (set_objfiles_updated_on_solib_activity): Remove.
2060 (_initialize_objfiles): Remove.
2061 (objfiles_changed): New function.
2062 * symfile.c (reread_symbols): Call objfiles_changed.
2064 2009-07-22 Hui Zhu <teawater@gmail.com>
2066 * record.c (record_xfer_partial): Call error When nquery
2069 2009-07-21 Paul Pluzhnikov <ppluzhnikov@google.com>
2071 * objfiles.c (objfiles_updated_p): New variable.
2072 (qsort_cmp, bsearch_cmp, update_section_map): New function.
2073 (find_pc_section): Use bsearch.
2074 (set_objfiles_updated_on_exe_change): New function.
2075 (set_objfiles_updated_on_solib_activity): New function.
2076 (_initialize_objfiles): New function.
2078 2009-07-21 Michael Eager <eager@eagercon.com>
2080 * features/rs6000/powerpc-405.xml: New.
2081 * rs6000-tdep.c: Add include & initialize for
2082 powerpc-405.c, add 405 to variants.
2083 * features/rs6000/powerpc-405.c: Generate.
2085 2009-07-21 Paul Pluzhnikov <ppluzhnikov@google.com>
2087 * utils.c (internal_vproblem): Always print failure message.
2089 2009-07-21 Daniel Jacobowitz <dan@codesourcery.com>
2090 Vladimir Prus <vladimir@codesourcery.com>
2092 * valops.c (value_fetch_lazy): Handle bitfields explicitly.
2093 (value_assign): Remove unnecessary FIXME. Honor the container
2094 type of bitfields if possible.
2095 * value.c (struct value): Add parent field.
2096 (value_parent): New function.
2097 (value_free): Free the parent also.
2098 (value_copy): Copy the parent also.
2099 (value_primitive_field): Do not read the contents of a lazy
2100 value to create a child bitfield value. Set bitpos and offset
2101 according to the container type if possible.
2102 (unpack_bits_as_long): Rename from unpack_field_as_long. Take
2103 field_type, bitpos, and bitsize instead of type and fieldno.
2104 (unpack_field_as_long): Use unpack_bits_as_long.
2105 * value.h (value_parent, unpack_bits_as_long): New prototypes.
2107 2009-07-21 Daniel Jacobowitz <dan@codesourcery.com>
2109 * value.c (struct value): Add reference_count field.
2110 (allocate_value_lazy): Initialize reference_count.
2111 (value_incref): New function.
2112 (value_free): Check the reference count.
2113 * value.h (value_incref): New prototype.
2115 2009-07-20 Marc Khouzam <marc.khouzam@ericsson.com>
2117 * utils.c (defaulted_query): Update comment and remove dead code.
2119 2009-07-20 Doug Evans <dje@google.com>
2121 Add support for "comdat types" from DWARF4.
2122 * dwarf2read.c (dwarf2_per_objfile): New member types,
2124 (TYPES_SECTION): New macro.
2125 (dwarf2_per_cu_data): Change size of length field from 30 bits
2126 to 29 bits. New member from_debug_types.
2127 (signatured_type): New struct.
2128 (struct attribute): New union member signatured_type.
2129 (DW_SIGNATURED_TYPE): New macro.
2130 (dwarf2_attr_no_follow): New function.
2131 (read_type_unit_scope): New function.
2132 (follow_die_ref_or_sig, follow_die_sig): New functions.
2133 (dwarf2_locate_sectoins): Handle .debug_types.
2134 (dwarf2_build_psymtabs): Read .debug_types.
2135 (read_type_comp_unit_head): New function.
2136 (hash_type_signature, eq_type_signature): New functions.
2137 (create_debug_types_hash_table): New function.
2138 (lookup_signatured_type): New function.
2139 (process_psymtab_comp_unit): Handle type units too.
2140 (process_type_comp_unit, build_type_psymtabs): New functions.
2141 (dwarf2_build_psymtabs_hard): Call build_type_psymtabs.
2142 (load_partial_comp_unit): Assert not called for a type unit.
2143 (skip_one_die): Handle DW_FORM_sig8.
2144 (queue_comp_unit): Don't call load_full_comp_unit here, or
2145 update read_in_chain.
2146 (psymtab_to_symtab_1): Call read_signatured_type_at_offset for
2147 type units, or load_full_comp_unit for comp units after
2148 queue_comp_unit returns.
2149 (load_full_comp_unit): Assert not called for type units.
2150 (load_full_comp_unit): Update read_in_chain here.
2151 (process_die): Handle DW_TAG_type_unit.
2152 (read_structure_type): Look for signatured types.
2153 (read_enumeration_type): Ditto.
2154 (init_cu_die_reader): Handle .debug_types.
2155 (read_comp_unit): Assert hash not computed yet.
2156 (read_die_and_children): Expand debugging printf to handle .debug_types.
2157 (read_partial_die): Handle DW_TAG_type_unit:
2158 (find_patial_die): Handle .debug_types.
2159 (read_attribute_value): Handle DW_FORM_sig8.
2160 (die_type): Call follow_die_ref_or_sig instead of follow_die_ref.
2161 (die_containing_type): Ditto.
2162 (dwarf_tag_name): Handle DW_TAG_type_unit.
2163 (dwarf_attr_name): Handle DW_AT_signature.
2164 (dwarf_form_name): Handle DW_FORM_sec_offset, DW_FORM_exprloc,
2165 DW_FORM_flag_present, DW_FORM_sig8.
2166 (dump_die_shallow): Handlel DW_FORM_sig8.
2167 (maybe_queue_comp_unit): Change return type to int from void.
2168 All callers updated.
2169 (follow_die_ref): Handle .debug_types.
2170 (lookup_signatured_type_at_offset): New function.
2171 (read_signatured_type_at_offset): New function.
2172 (read_signatured_type): New function.
2174 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
2176 * arch-utils.c (gdbarch_info_fill): Only reference GDB_OSABI_DEFAULT
2177 if the macro is defined.
2179 2009-07-20 Pedro Alves <pedro@codesourcery.com>
2181 * features/gdb-target.dtd (target): Accept an optional 'osabi'
2183 (osabi): Define element.
2184 * features/mips-linux.xml (target): Add an osabi subelement set to
2186 * regformats/regdat.sh (xmlarch, xmlosabi): New variables. Don't
2187 write the architecture into $xmltarget. Store it in $xmlarch.
2188 Handle the 'osabi' type. Handle outputting the osabi element of
2189 the target description.
2190 * regformats/reg-x86-64-linux.dat (osabi): Set to GNU/Linux.
2191 * regformats/reg-i386-linux.dat (osabi): Set to GNU/Linux.
2193 * target-descriptions.h (tdesc_osabi, set_tdesc_osabi): Declare.
2194 * target-descriptions.c (struct target_desc) <osabi>: New field.
2195 (tdesc_osabi): New function.
2196 (set_tdesc_osabi): New function.
2197 * xml-tdesc.c: Include osabi.h.
2198 (tdesc_end_osabi): New.
2199 (target_children): Parse "osabi" elements.
2200 * arch-utils.c (gdbarch_info_fill): Try to get the osabi from the
2201 target description if the user didn't override it or it is not
2202 extractable from the bfd. If that still fails, fallback to the
2203 configured in default.
2204 * osabi.h (osabi_from_tdesc_string): Declare.
2205 * osabi.c (osabi_from_tdesc_string): New.
2206 (gdbarch_lookup_osabi): Return GDB_OSABI_UNKNOWN instead of
2209 * NEWS: Mention that target descriptions can now describe the
2212 2009-07-20 Mike Frysinger <vapier@gentoo.org>
2214 * configure.ac (AC_CHECK_FUNCS): Check for pipe.
2215 * config.in, configure: Regenerate.
2216 * tui/tui-io.c (TUI_USE_PIPE_FOR_READLINE): Define if HAVE_PIPE.
2218 2009-07-20 Pedro Alves <pedro@codesourcery.com>
2220 * gnu-nat.c: Include "inf-child.h".
2221 (gnu_mourn_inferior): Use the passed in target_ops
2222 instead of the gnu_ops global.
2223 (gnu_create_inferior): Inline `attach_to_child', use the passed in
2224 target_ops instead of the gnu_ops global.
2225 (gnu_can_run): Delete.
2226 (gnu_attach): Use the passed in target_ops instead of the gnu_ops
2228 (gnu_detach): Ditto.
2229 (gnu_prepare_to_store, gnu_open): Delete.
2230 (gnu_store_registers, gnu_fetch_registers): Delete declarations.
2232 (init_gnu_ops): Delete.
2234 (_initialize_gnu_nat): Don't call init_gnu_ops or add_target here.
2235 * gnu-nat.h (gnu_target): Declare.
2236 * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Make
2238 (_initialize_i386gnu_nat): New.
2240 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
2242 * dwarf2loc.c (find_location_expression): Retrieve beginning and
2243 ending address offsets in location list entries as integers,
2246 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
2248 * infrun.c (wait_for_inferior): Invalidate registers and overlay
2249 cache every time before calling target_wait.
2250 (handle_inferior_event): Make static. Always reset waiton_ptid.
2251 Never call registers_changed.
2252 (prepare_to_wait): Do not invaliate registers or overlay cache
2253 (moved to wait_for_inferior). Do not reset waiton_ptid (moved
2254 to handle_inferior_event).
2255 (fetch_inferior_event): Remove check for always-true condition.
2257 2009-07-20 Thomas Schwinge <tschwinge@gnu.org>
2259 * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Adjust to
2260 2009-02-23 target_ops changes.
2262 2009-07-18 Michael Snyder <msnyder@vmware.com>
2264 * infrun.c (handle_inferior_event): Remove an execution_direction
2265 check in the "check for subroutine calls" test, and add some
2266 additional handling for reverse-stepping through shared libraries.
2268 2009-07-18 Anthony Green <green@moxielogic.com>
2270 * moxie-tdep.c (moxie_analyze_prologue): Take gdbarch as last
2271 parameter instead of frame_info.
2272 (moxie_frame_cache): Call moxie_analyze_prologue with different
2275 2009-07-17 Ulrich Weigand <uweigand@de.ibm.com>
2277 * solib.c (solib_bfd_open): Do not call ops->bfd_open.
2278 (solib_map_sections): Call ops->bfd_open instead of solib_bfd_open.
2279 * solib-frv.c (_initialize_frv_solib): Initialize bfd_open member.
2280 * solib-irix.c (_initialize_irix_solib): Likewise.
2281 * solib-null.c (_initialize_null_solib): Likewise.
2282 * solib-osf.c (_initialize_osf_solib): Likewise.
2283 * solib-pa64.c (_initialize_pa64_solib): Likewise.
2284 * solib-som.c (_initialize_som_solib): Likewise.
2285 * solib-sunos.c (_initialize_sunos_solib): Likewise.
2286 * solib-svr4.c (_initialize_svr4_solib): Likewise.
2287 * solib-target.c (_initialize_solib_target): Likewise.
2289 2009-07-17 Ulrich Weigand <uweigand@de.ibm.com>
2291 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Respect mixed_mode flag.
2293 2009-07-16 Doug Evans <dje@google.com>
2295 * linux-thread.db.c (try_thread_db_load_1): Tweak comment.
2297 2007-07-16 Paul Pluzhnikov <ppluzhnikov@google.com>
2299 * linux-thread-db.c (thread_db_find_new_threads_silently):
2301 (try_thread_db_load_1): Call it.
2303 2009-07-15 Doug Evans <dje@google.com>
2305 Code reorg in preparation for adding comdat types support.
2306 * dwarf2read.c (struct die_reader_specs): New struct.
2307 (locate_pdi_sibling): New arg buffer. All callers updated.
2308 (load_partial_dies, read_partial_die): Ditto.
2309 (read_8_bytes): Change return type to ULONGEST.
2310 (read_comp_unit): Delete arg abfd. All callers updated.
2311 (read_die_and_children_1): Delete args abfd, cu. New arg reader.
2312 All callers updated.
2313 (read_die_and_children, read_die_and_siblings): Ditto.
2314 (read_full_die): Ditto. Move closer to callers.
2315 (skip_one_die): New arg buffer. All callers updated.
2316 (load_full_comp_unit): Change return type to void. All callers
2318 (partial_read_comp_unit_head): New args buffer, buffer_size.
2319 All callers updated.
2320 (process_psymtab_comp_unit): New function, split out from
2321 dwarf2_build_psymtabs_hard.
2322 (dwarf2_build_psymtabs_hard): Call it.
2323 (load_partial_comp_unit): Renamed from load_comp_unit.
2324 All callers updated.
2325 (skip_children): New arg buffer. All callers updated.
2326 (init_cu_die_reader): New function.
2327 (is_ref_attr): New function.
2328 (dwarf2_get_ref_die_offset): Call it.
2329 (alloc_one_comp_unit): New function.
2331 2009-07-14 Stan Shebs <stan@codesourcery.com>
2333 * MAINTAINERS (Global Maintainers): Add Doug Evans.
2335 2009-07-14 Stan Shebs <stan@codesourcery.com>
2337 Conditional tracepoints.
2338 * ax-gdb.h (gen_eval_for_expr): Declare.
2339 * ax-gdb.c (gen_expr): Generate bytecodes for BINOP_EQUAL
2340 and other comparisons.
2341 (gen_eval_for_expr): New function.
2342 (agent_eval_command): New maintenance command.
2343 (_initialize_ax_gdb): Define the command.
2344 * remote.c (struct remote_state): New field cond_tracepoints.
2345 (PACKET_ConditionalTracepoints): New packet config type.
2346 (remote_cond_tracepoint_feature): New function.
2347 (remote_protocol_features): Add ConditionalTracepoints.
2348 (remote_supports_cond_tracepoints): New function.
2349 (_initialize_remote): Add ConditionalTracepoints.
2350 * tracepoint.c (download_tracepoint): Add conditional.
2351 * NEWS: Mention conditional tracepoints.
2353 2009-07-14 Ulrich Weigand <uweigand@de.ibm.com>
2355 * objfiles.c (objfile_relocate): Do not relocate the same
2356 BLOCKVECTOR_MAP address map multiple times.
2358 2009-07-14 Ulrich Weigand <uweigand@de.ibm.com>
2360 * remote.c (process_stop_reply): Access expedited target registers
2363 2009-07-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2365 Fix memory access from signed 32bit inferior registers on 64bit GDB.
2366 * linux-nat.c (linux_xfer_partial <TARGET_OBJECT_MEMORY>): New variable
2367 addr_bit. Mask OFFSET by the ADDR_BIT width.
2369 2009-07-13 Anthony Green <green@moxielogic.com>
2371 * moxie-tdep.c (moxie_gdbarch_init): Call
2372 set_gdbarch_process_record.
2373 (moxie_process_record): New.
2374 (moxie_process_readu): New.
2376 2009-07-12 Michael Snyder <msnyder@vmware.com>
2378 * i386-tdep.c: Add a frame unwinder for function epilogues.
2379 (i386_in_function_epilogue_p): New function.
2380 (i386_epilogue_frame_sniffer): New function.
2381 (i386_epilogue_frame_cache): New function.
2382 (i386_epilogue_frame_this_id): New function.
2383 (i386_epilogue_frame_unwind): New struct frame_unwind.
2384 (i386_gdbarch_init): Hook the new unwinder.
2386 2009-07-11 Hui Zhu <teawater@gmail.com>
2388 * cli/cli-cmds.c (disassemble_command): Add a new modifier /r
2389 to "disassemble" command to print the raw instructions in hex as
2390 well as in symbolic form.
2391 (init_cli_cmds): Ditto.
2392 (print_disassembly): Change "mixed" to "flags" to translate
2393 the behavior of disassemble.
2394 (disassemble_current_function): Ditto.
2395 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
2396 * stack.c (gdb_disassembly_stub): Ditto.
2397 * disasm.c (do_mixed_source_and_assembly): Ditto.
2398 (do_mixed_source_and_assembly): Ditto.
2399 (do_assembly_only): Ditto.
2400 (gdb_disassembly): Ditto.
2401 (dump_insns): print the raw instructions in hex as well as in
2402 symbolic form if DISASSEMBLY_RAW_INSN and flags is true.
2403 * disasm.h (DISASSEMBLY_SOURCE): Include source code with the
2404 assembly if it and flags is true.
2405 (DISASSEMBLY_RAW_INSN): Include the raw instructions in hex with
2406 the assembly if it and flags is true.
2407 (gdb_disassembly): Update extern.
2408 * NEWS: Document disassemble/r support.
2410 2009-07-10 Tom Tromey <tromey@redhat.com>
2412 * dwarf2-frame.c: Include dwarf2.h, not elf/dwarf2.h.
2413 * dwarf2expr.c: Likewise.
2414 * dwarf2loc.c: Likewise.
2415 * dwarf2read.c: Likewise.
2416 * sh-tdep.c: Likewise.
2417 * xtensa-tdep.c: Likewise.
2419 2009-07-10 Jan Kratochvil <jan.kratochvil@redhat.com>
2422 * mi/mi-cmd-var.c (mi_cmd_var_update): Remove variable nv. Move
2423 variables var, rootlist and cr to their local sub-block. Move the
2424 make_cleanup_ui_out_tuple_begin_end, make_cleanup_ui_out_list_begin_end
2425 and do_cleanups calls to the common base block. Remove the zero NV
2428 2009-07-10 Phil Muldoon <pmuldoon@redhat.com>
2430 * python/python-internal.h (apply_varobj_pretty_printer): Update
2432 (python_string_to_target_python_string): Add definition.
2433 * python/python-utils.c (unicode_to_encoded_python_string)
2434 (unicode_to_target_python_string)
2435 (python_string_to_target_python_string): New Functions.
2436 * python/python-prettyprint.c (pretty_print_one_value): Likewise.
2437 (print_string_repr): Refactor to logic to account for PyObject
2439 (apply_varobj_pretty_printer): Likewise.
2440 * python/python-value.c (valpy_string): Parse length keyword. Use
2441 length keyword in LA_GET_STRING.
2442 * varobj.c (value_get_print_value): Refactor logic to account for
2443 PyObject returned strings.
2444 * c-lang.c (c_get_string): If the length parameter is specified,
2445 use that. Return value in characters. Update comments.
2446 * language.h: Update c_get_string prototype comments.
2448 2009-07-09 Doug Evans <dje@google.com>
2450 * i386-tdep.c (i386_displaced_step_fixup): Fix order of arguments
2451 to read_memory_unsigned_integer.
2453 2009-07-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2455 Report error on inaccessible memory.
2456 * cli/cli-dump.c: Include gdbcore.h.
2457 (dump_memory_to_file): Call read_memory instead of target_read_memory.
2459 2009-07-09 Hui Zhu <teawater@gmail.com>
2461 * solib.c (solib_bfd_open): Output a warning if solib's
2462 architecture is not compatible with inferior's architecture.
2464 2009-07-09 Ulrich Weigand <uweigand@de.ibm.com>
2465 Jan Kratochvil <jan.kratochvil@redhat.com>
2467 * target.h (struct target_ops <to_thread_architecture>): Describe it.
2468 (target_thread_architecture): Refer to to_thread_architecture.
2470 2009-07-08 Pierre Muller <muller@ics.u-strasbg.fr>
2472 * cli/cli-cmds.c (init_cli_cmds): Add "inf" alias for "info" command.
2474 2009-07-07 Ulrich Weigand <uweigand@de.ibm.com>
2476 * tui/tui-stack.c (tui_make_status_line): Display PC as ?? if unknown.
2478 2009-07-07 Pierre Muller <muller@ics.u-strasbg.fr>
2480 * breakpoint.c (set_raw_breakpoint): Remove static modifier.
2482 2009-07-07 Tom Tromey <tromey@redhat.com>
2484 * c-lang.c (convert_octal): Only allow 3 octal digits.
2485 (print_wchar): Prefer 3-digit octal form. Fall back to hex if
2487 * c-exp.y (c_parse_escape): Only allow 3 octal digits.
2489 2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
2491 * python/python-value.c (valpy_getitem): Remove incorrect assert.
2493 2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
2495 * python/python-value.c (valpy_getitem): Don't return from TRY_CATCH.
2497 2009-07-07 Sami Wagiaalla <swagiaal@redhat.com>
2499 * cp-support.h (struct using_direct): Rename members inner and
2500 outer to import_src, and import_dest respectively.
2501 * cp-namespace.c (cp_add_using_directive): Update.
2502 (cp_add_using): Update.
2503 (cp_copy_usings): Update.
2504 (cp_lookup_symbol_namespace): Update.
2505 (cp_scan_for_anonymous_namespaces): Update.
2506 * cp-support.c (make_symbol_overload_list_using): Update.
2507 * cp-support.h (cp_add_using_directive, cp_add_using): Rename
2508 arguments from inner and outer to src and dest respectively.
2509 * cp-namespace.c (cp_add_using_directive): Ditto.
2510 (cp_add_using): Ditto.
2512 2009-07-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2514 * mi/mi-cmd-var.c (mi_cmd_var_update): Replace a while loop by for loop.
2515 * varobj.c (varobj_invalidate): Replace a while loop by for loop.
2517 2009-07-07 Vladimir Prus <vladimir@codesourcery.com>
2519 Fix hang in floating varobjs.
2521 * varobj.c (varobj_invalidate): Advance to next
2522 element when processing floating varobj.
2524 2009-07-07 Vladimir Prus <vladimir@codesourcery.com>
2526 * varobj.c: Remove unnecessary include.
2528 2009-07-07 Tristan Gingold <gingold@adacore.com>
2530 * config/i386/darwin.mh (NATDEPFILES): Remove excServer.o.
2531 Remove excServer.c target. Remove _all target.
2532 * darwin.defs: Removed.
2534 2009-07-06 Aleksandar Ristovski <aristovski@qnx.com>
2536 * configure.tgt (i[34567]86-*-nto*): Add build_gdbserver=yes.
2538 2009-07-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2540 * source.c (find_and_open_source): Remove the `objfile' parameter.
2541 Update the function comment.
2542 (open_source_file, symtab_to_fullname, psymtab_to_fullname): Update the
2543 find_and_open_source callers.
2545 2009-07-05 Pedro Alves <pedro@codesourcery.com>
2547 * coff-pe-read.c (read_pe_exported_syms): Recognize
2548 "pe-arm-wince-little" and "pei-arm-wince-little" bfd targets as PE
2551 2009-07-05 Pedro Alves <pedro@codesourcery.com>
2553 * arm-wince-tdep.c (arm_wince_skip_main_prologue): New.
2554 (arm_wince_init_abi): Register it as gdbarch_skip_main_prologue
2557 2009-06-29 Tristan Gingold <gingold@adacore.com>
2559 * i386-darwin-tdep.c (amd64_darwin_thread_state_reg_offset)
2560 (amd64_darwin_thread_state_num_regs)
2561 (amd64_darwin_sigcontext_addr, x86_darwin_init_abi_64): Moved to
2563 (_initialize_i386_darwin_tdep): Remove 64 bits parts.
2564 (darwin_dwarf_signal_frame_p): Make public.
2565 * amd64-darwin-tdep.c: New file with most chunks from
2567 * i386-darwin-tdep.h: Add a prototype for darwin_dwarf_signal_frame_p.
2568 (amd64_darwin_thread_state_reg_offset)
2569 (amd64_darwin_thread_state_num_regs): Moved to amd64-darwin-tdep.h
2570 * amd64-darwin-tdep.h: New file.
2571 * i386-darwin-nat.c: Only includes amd64-nat.h and amd64-darwin-tdep.h
2572 if BFD64 is defined.
2573 (i386_darwin_fetch_inferior_registers): Add #ifdef BFD64/#endif around
2575 (i386_darwin_store_inferior_registers): Ditto.
2576 (darwin_set_sstep): Ditto.
2577 (darwin_complete_target): Ditto.
2578 (amd64_darwin_sstep_at_sigreturn): Ditto.
2579 * configure.tgt: Create a separate entry for x86_64-*-darwin.
2580 Add 64 bits support for i386-*-darwin if --enable-64-bit-bfd.
2581 * Makefile.in (ALLDEPFILES): Add amd64-darwin-tdep.c, darwin-nat.c,
2582 i386-darwin-tdep.c i386-darwin-nat.c
2583 (ALL_64_TARGET_OBS): Add amd64-darwin-tdep.o
2585 2009-07-02 Pedro Alves <pedro@codesourcery.com>
2587 * linux-fork.c (forks_exist_p): Drop unnecessary extern.
2588 (add_fork, linux_fork_killall, linux_fork_mourn_inferior)
2589 (linux_fork_detach): Ditto.
2590 (delete_fork_command): Rename to ...
2591 (delete_checkpoint_command): ... this.
2592 (detach_fork_command): Rename to ...
2593 (detach_checkpoint_command): ... this.
2594 (info_forks_command): Rename to ...
2595 (info_checkpoints_command): ... this.
2596 (_initialize_linux_fork): Remove stale comments. Adjust.
2598 2009-07-02 Pedro Alves <pedro@codesourcery.com>
2600 * linux-nat.c (linux_child_follow_fork): If we're staying attached
2601 to the child process, enable event reporting on it. Don't handle
2602 checkpoints here. Instead, add the child fork to the lwp thread
2603 and inferior lists without clobbering the previous inferior. Let
2604 the thread_db layer learn about a new child process, even if
2605 following the parent.
2606 (linux_nat_switch_fork): Delete lwps of the current inferior only,
2607 instead of clearing the whole list. Use thread_change_ptid to
2608 give the core the illusion the new checkpoint is still the same
2609 inferior. Clear the register cache.
2610 (linux_handle_extended_wait): Handle checkpoints here.
2611 (linux_multi_process): Turn on.
2612 * linux-fork.c (struct fork_info) <pc>: Remove field.
2613 (init_fork_list): Do not delete the checkpoint from the inferior
2614 list (it is not there).
2615 (fork_load_infrun_state): Don't switch inferior_ptid here. Pass
2616 the new checkpoint's ptid to linux_nat_switch_fork.
2617 (fork_save_infrun_state): Make static. Don't stop the pc field of
2618 fork_info, it's gone.
2619 (linux_fork_mourn_inferior): Don't delete the checkpoint from the
2620 inferior list, it's not there.
2621 (linux_fork_detach): Ditto.
2622 (delete_fork_command): Replace mention of fork/checkpoint by
2624 (detach_fork_command): Likewise. Don't delete the checkpoint from
2626 (info_forks_command): Adjust.
2627 (restore_detach_fork): Delete.
2628 (checkpointing_pid): New.
2629 (linux_fork_checkpointing_p): New.
2630 (save_detach_fork): Delete.
2631 (checkpoint_command): Delete temp_detach_fork. Don't remove
2632 breakpoints, that's a nop. Store the pid of the process we're
2633 checkpointing, and use make_cleanup_restore_integer to restore it.
2634 Don't reinsert breakpoints here.
2635 (process_command, fork_command): Delete.
2636 (restart_command): Update comments to only mention checkpoints,
2638 (_initialize_linux_fork): Delete "fork", "process", "info forks"
2640 * linux-fork.h (fork_save_infrun_state, fork_list): Delete
2642 (linux_fork_checkpointing_p): Declare.
2643 * cli/cli-cmds.c (killlist): New.
2644 * cli/cli-cmds.h (killlist): Declare.
2645 * gdbcmd.h (killlist): Declare.
2646 * inferior.c: Include "gdbthread.h".
2647 (detach_inferior_command, kill_inferior_command)
2648 (inferior_command): New.
2649 (info_inferiors_command): Allow specifying a specific inferior id.
2650 (_initialize_inferiors): Register "inferior", "kill inferior" and
2651 "detach inferior" commands.
2652 * infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
2653 * gdbthread.h (any_thread_of_process): Declare.
2654 * thread.c (any_thread_of_process): New.
2656 * NEWS: Mention multi-inferior debugging. Mention 'info
2657 inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
2659 (Removed commands): New section, mentioning that 'info forks',
2660 'fork', 'process', 'delete fork' and 'detach fork' are now gone.
2662 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2664 * gdbarch.sh (current_gdbarch): Remove global variable.
2665 (find_arch_by_info): Remove, inline into ...
2666 (gdbarch_find_by_info): ... this. Remove current_gdbarch swapping.
2667 (deprecated_current_gdbarch_select_hack): Rename to ...
2668 (deprecated_target_gdbarch_select_hack): ... this. Do not set
2669 or access current_gdbarch.
2670 * gdbarch.c, gdbarch.h: Regenerate.
2672 * arch-utils.c (gdbarch_update_p): Update call.
2673 (set_gdbarch_from_file): Likewise.
2675 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2677 * defs.h (extract_signed_integer, extract_unsigned_integer,
2678 extract_long_unsigned_integer, store_signed_integer,
2679 store_unsigned_integer): Add BYTE_ORDER parameter.
2680 * findvar.c (extract_signed_integer, extract_unsigned_integer,
2681 extract_long_unsigned_integer, store_signed_integer,
2682 store_unsigned_integer): Add BYTE_ORDER parameter. Use it
2683 instead of current_gdbarch.
2685 * gdbcore.h (read_memory_integer, safe_read_memory_integer,
2686 read_memory_unsigned_integer, write_memory_signed_integer,
2687 write_memory_unsigned_integer): Add BYTE_ORDER parameter.
2688 * corefile.c (struct captured_read_memory_integer_arguments): Add
2690 (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
2691 struct captured_read_memory_integer_arguments.
2692 (do_captured_read_memory_integer): Pass it to read_memory_integer.
2693 (read_memory_integer): Add BYTE_ORDER parameter. Pass it to
2694 extract_signed_integer.
2695 (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
2696 extract_unsigned_integer.
2697 (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
2698 to store_signed_integer.
2699 (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
2700 to store_unsigned_integer.
2702 * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
2703 * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
2704 Pass it to extract_unsigned_integer.
2707 Update calls to extract_signed_integer, extract_unsigned_integer,
2708 extract_long_unsigned_integer, store_signed_integer,
2709 store_unsigned_integer, read_memory_integer,
2710 read_memory_unsigned_integer, safe_read_memory_integer,
2711 write_memory_signed_integer, write_memory_unsigned_integer, and
2712 get_target_memory_unsigned to pass byte order:
2713 * ada-lang.c (ada_value_binop): Update.
2714 * ada-valprint.c (char_at): Update.
2715 * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
2716 * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
2717 alpha_extract_return_value, alpha_read_insn,
2718 alpha_get_longjmp_target): Update.
2719 * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
2720 * amd64obsd-tdep.c (amd64obsd_supply_uthread,
2721 amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
2722 * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
2723 amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
2724 amd64_displaced_step_fixup): Update.
2725 * arm-linux-tdep.c (arm_linux_sigreturn_init,
2726 arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
2727 * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
2728 arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
2729 arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
2730 arm_return_value): Update.
2731 * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
2732 * auxv.c (default_auxv_parse): Update.
2733 * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
2734 avr_scan_prologue, avr_extract_return_value,
2735 avr_frame_prev_register, avr_push_dummy_call): Update.
2736 * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
2737 bsd_uthread_wait, bsd_uthread_thread_alive,
2738 bsd_uthread_extra_thread_info): Update.
2739 * c-lang.c (c_printstr, print_wchar): Update.
2740 * cp-valprint.c (cp_print_class_member): Update.
2741 * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
2742 cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
2743 cris_extract_return_value, find_step_target, dip_prefix,
2744 sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
2745 move_mem_to_reg_movem_op, get_data_from_address): Update.
2746 * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
2747 * dwarf2-frame.c (execute_cfa_program): Update.
2748 * dwarf2loc.c (find_location_expression): Update.
2749 * dwarf2read.c (dwarf2_const_value): Update.
2750 * expprint.c (print_subexp_standard): Update.
2751 * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
2752 unsigned_address_to_pointer, address_to_signed_pointer,
2753 read_var_value): Update.
2754 * frame.c (frame_unwind_register_signed,
2755 frame_unwind_register_unsigned, get_frame_memory_signed,
2756 get_frame_memory_unsigned): Update.
2757 * frame-unwind.c (frame_unwind_got_constant): Update.
2758 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
2759 frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
2761 * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
2762 frv_extract_return_value, find_func_descr,
2763 frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
2764 * f-valprint.c (f_val_print): Update.
2765 * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
2767 * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
2768 h8300_push_dummy_call, h8300_extract_return_value,
2769 h8300h_extract_return_value, h8300_store_return_value,
2770 h8300h_store_return_value): Update.
2771 * hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
2772 * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
2774 * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
2775 hppa64_hpux_in_solib_call_trampoline,
2776 hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
2777 hppa_hpux_sigtramp_frame_unwind_cache,
2778 hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
2779 hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
2780 hppa32_hpux_search_dummy_call_sequence,
2781 hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
2782 hppa_hpux_unwind_adjust_stub): Update.
2783 * hppa-linux-tdep.c (insns_match_pattern,
2784 hppa_linux_find_global_pointer): Update.
2785 * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
2786 hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
2787 skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
2788 hppa_pseudo_register_read, hppa_frame_prev_register_helper,
2789 hppa_match_insns): Update.
2790 * hpux-thread.c (hpux_thread_fetch_registers): Update.
2791 * i386-tdep.c (i386bsd_sigcontext_addr): Update.
2792 * i386-cygwin-tdep.c (core_process_module_section): Update.
2793 * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
2794 amd64_darwin_sstep_at_sigreturn): Update.
2795 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
2796 amd64_darwin_sigcontext_addr): Likewise.
2797 * i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
2798 * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
2799 * i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
2800 * i386obsd-nat.c (i386obsd_supply_pcb): Update.
2801 * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
2802 i386obsd_trapframe_cache): Update.
2803 * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
2804 i386_analyze_frame_setup, i386_analyze_prologue,
2805 i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
2806 i386_get_longjmp_target, i386_push_dummy_call,
2807 i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
2808 i386_fetch_pointer_argument): Update.
2809 * i387-tdep.c (i387_supply_fsave): Update.
2810 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
2811 * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
2812 examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
2813 ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
2814 ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
2815 ia64_libunwind_frame_prev_register,
2816 ia64_libunwind_sigtramp_frame_this_id,
2817 ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
2818 find_extant_func_descr, find_func_descr,
2819 ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
2820 ia64_unwind_pc): Update.
2821 * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
2822 iq2000_scan_prologue, iq2000_extract_return_value,
2823 iq2000_push_dummy_call): Update.
2824 * irix5nat.c (fill_gregset): Update.
2825 * jv-lang.c (evaluate_subexp_java): Update.
2826 * jv-valprint.c (java_value_print): Update.
2827 * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
2828 lm32_extract_return_value, lm32_store_return_value): Update.
2829 * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
2830 m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
2831 m32c_m16c_pointer_to_address): Update.
2832 * m32r-tdep.c (m32r_store_return_value, decode_prologue,
2833 m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
2835 * m68hc11-tdep.c (m68hc11_pseudo_register_read,
2836 m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
2837 m68hc11_push_dummy_call): Update.
2838 * m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
2839 m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
2841 * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
2842 m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
2843 m68k_get_longjmp_target): Update.
2844 * m88k-tdep.c (m88k_fetch_instruction): Update.
2845 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
2846 mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
2847 * mi/mi-main.c (mi_cmd_data_write_memory): Update.
2848 * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
2849 mips64_linux_get_longjmp_target, mips64_fill_gregset,
2850 mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
2851 * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
2852 * mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
2853 mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
2854 mips_o32_push_dummy_call, mips_o64_push_dummy_call,
2855 mips_single_step_through_delay, mips_skip_pic_trampoline_code,
2856 mips_integer_to_address): Update.
2857 * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
2859 * monitor.c (monitor_supply_register, monitor_write_memory,
2860 monitor_read_memory_single): Update.
2861 * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
2862 moxie_analyze_prologue): Update.
2863 * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
2864 mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
2865 mt_push_dummy_call): Update.
2866 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
2867 read_objc_methlist_method, read_objc_object, read_objc_super,
2868 read_objc_class, find_implementation_from_class): Update.
2869 * ppc64-linux-tdep.c (ppc64_desc_entry_point,
2870 ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
2872 * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
2873 ppcobsd_sigtramp_frame_cache): Update.
2874 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
2875 do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
2876 ppc64_sysv_abi_return_value): Update.
2877 * ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
2878 * procfs.c (procfs_auxv_parse): Update.
2879 * p-valprint.c (pascal_val_print): Update.
2880 * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
2881 regcache_raw_write_signed, regcache_raw_write_unsigned,
2882 regcache_cooked_read_signed, regcache_cooked_read_unsigned,
2883 regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
2884 * remote-m32r-sdi.c (m32r_fetch_register): Update.
2885 * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
2887 * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
2888 rs6000_convert_from_func_ptr_addr, branch_dest,
2889 rs6000_software_single_step): Update.
2890 * rs6000-tdep.c (rs6000_in_function_epilogue_p,
2891 ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
2892 bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
2893 rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
2894 rs6000_frame_cache): Update.
2895 * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
2896 s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
2897 s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
2898 extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
2899 * scm-exp.c (scm_lreadr): Update.
2900 * scm-lang.c (scm_get_field, scm_unpack): Update.
2901 * scm-valprint.c (scm_val_print): Update.
2902 * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
2903 score_fetch_inst): Update.
2904 * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
2905 sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
2906 sh64_pseudo_register_read, sh64_pseudo_register_write,
2907 sh64_frame_prev_register): Update:
2908 * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
2909 sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
2910 sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
2911 * solib-darwin.c (darwin_load_image_infos): Update.
2912 * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
2913 find_canonical_descriptor_in_load_object): Update.
2914 * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
2915 irix_open_symbol_file_object): Update.
2916 * solib-som.c (som_solib_create_inferior_hook, link_map_start,
2917 som_current_sos, som_open_symbol_file_object): Update.
2918 * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
2920 * solib-svr4.c (read_program_header, scan_dyntag_auxv,
2921 solib_svr4_r_ldsomap): Update.
2922 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
2923 * sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
2924 sparc64obsd_collect_uthread): Update.
2925 * sparc64-tdep.c (sparc64_pseudo_register_read,
2926 sparc64_pseudo_register_write, sparc64_supply_gregset,
2927 sparc64_collect_gregset): Update.
2928 * sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
2929 * sparcobsd-tdep.c (sparc32obsd_supply_uthread,
2930 sparc32obsd_collect_uthread): Update.
2931 * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
2932 sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
2933 sparc_collect_rwindow): Update.
2934 * spu-linux-nat.c (parse_spufs_run): Update.
2935 * spu-tdep.c (spu_pseudo_register_read_spu,
2936 spu_pseudo_register_write_spu, spu_pointer_to_address,
2937 spu_analyze_prologue, spu_in_function_epilogue_p,
2938 spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
2939 spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
2940 info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
2941 info_spu_dma_command, info_spu_proxydma_command): Update.
2942 * stack.c (print_frame_nameless_args, frame_info): Update.
2943 * symfile.c (read_target_long_array, simple_read_overlay_table,
2944 simple_read_overlay_region_table): Update.
2945 * target.c (debug_print_register): Update.
2946 * tramp-frame.c (tramp_frame_start): Update.
2947 * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
2948 v850_extract_return_value, v850_store_return_value,
2949 * valarith.c (value_binop, value_bit_index): Update.
2950 * valops.c (value_cast): Update.
2951 * valprint.c (val_print_type_code_int, val_print_string,
2952 read_string): Update.
2953 * value.c (unpack_long, unpack_double, unpack_field_as_long,
2954 modify_field, pack_long): Update.
2955 * vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
2956 vax_skip_prologue): Update.
2957 * xstormy16-tdep.c (xstormy16_push_dummy_call,
2958 xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
2959 xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
2960 xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
2961 * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
2962 xtensa_pseudo_register_write, xtensa_frame_cache,
2963 xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
2966 * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
2967 decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
2968 BYTE_ORDER parameter.
2969 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
2971 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
2972 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
2973 * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
2974 instead of current_gdbarch.
2975 (decimal_to_string, decimal_from_integral, decimal_from_floating,
2976 decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
2977 Pass it to match_endianness.
2978 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
2979 parameters. Pass them to match_endianness.
2980 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
2981 Pass them to match_endianness.
2982 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
2983 Pass them to match_endianness.
2984 * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
2985 BYTE_ORDER_Y output parameters.
2986 (value_binop): Update call to value_args_as_decimal.
2988 Update calls to decimal_to_string, decimal_from_string,
2989 decimal_from_integral, decimal_from_floating, decimal_to_doublest,
2990 decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
2991 to pass/receive byte order:
2992 * c-exp.y (parse_number): Update.
2993 * printcmd.c (printf_command): Update.
2994 * valarith.c (value_args_as_decimal, value_binop, value_logical_not,
2995 value_equal, value_less): Update.
2996 * valops.c (value_cast, value_one): Update.
2997 * valprint.c (print_decimal_floating): Update.
2998 * value.c (unpack_long, unpack_double): Update.
2999 * python/python-value.c (valpy_nonzero): Update.
3002 * ada-valprint.c (char_at): Add BYTE_ORDER parameter.
3003 (printstr): Update calls to char_at.
3004 (ada_val_print_array): Likewise.
3005 * valprint.c (read_string): Add BYTE_ORDER parameter.
3006 (val_print_string): Update call to read_string.
3007 * c-lang.c (c_get_string): Likewise.
3008 * charset.h (target_wide_charset): Add BYTE_ORDER parameter.
3009 * charset.c (target_wide_charset): Add BYTE_ORDER parameter.
3010 Use it instead of current_gdbarch.
3011 * printcmd.c (printf_command): Update calls to target_wide_charset.
3012 * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
3013 Pass to target_wide_charset. Use it instead of current_gdbarch.
3014 (classify_type): Add BYTE_ORDER parameter. Pass to
3015 charset_for_string_type. Allow NULL encoding pointer.
3016 (print_wchar): Add BYTE_ORDER parameter.
3017 (c_emit_char): Update calls to classify_type and print_wchar.
3018 (c_printchar, c_printstr): Likewise.
3021 * gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
3022 * gdbarch.c, gdbarch.h: Regenerate.
3023 * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
3025 * arch-utils.c (generic_in_solib_return_trampoline): Likewise.
3026 * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
3027 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
3028 (rs6000_skip_trampoline_code): Update call.
3030 * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
3031 dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
3032 (alpha_read_insn): Add GDBARCH parameter.
3033 * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
3034 (alpha_register_to_value): Pass architecture to alpha_sts.
3035 (alpha_extract_return_value): Likewise.
3036 (alpha_value_to_register): Pass architecture to alpha_lds.
3037 (alpha_store_return_value): Likewise.
3038 (alpha_read_insn): Add GDBARCH parameter.
3039 (alpha_skip_prologue): Pass architecture to alpha_read_insn.
3040 (alpha_heuristic_proc_start): Likewise.
3041 (alpha_heuristic_frame_unwind_cache): Likewise.
3042 (alpha_next_pc): Likewise.
3043 (alpha_sigtramp_frame_this_id): Pass architecture to
3044 tdep->dynamic_sigtramp_offset callback.
3045 (alpha_sigtramp_frame_sniffer): Pass architecture to
3046 tdep->pc_in_sigtramp callback.
3047 * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
3048 (alphafbsd_sigtramp_offset): Likewise.
3049 * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
3050 parameter. Pass to alpha_read_insn.
3051 (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
3052 alpha_linux_sigtramp_offset_1.
3053 (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
3054 alpha_linux_sigtramp_offset.
3055 (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
3056 and alpha_linux_sigtramp_offset.
3057 * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
3058 (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
3059 alphanbsd_sigtramp_offset.
3060 * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
3061 (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
3063 (alphaobsd_sigcontext_addr): Pass architecture to
3064 alphaobsd_sigtramp_offset.
3065 * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
3068 * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
3069 (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
3070 (amd64_frame_cache): Likewise.
3072 * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
3073 (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
3074 thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
3075 * arm-wince-tdep.c: Include "frame.h".
3077 * avr-tdep.c (EXTRACT_INSN): Remove.
3078 (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
3079 (avr_skip_prologue): Pass architecture to avr_scan_prologue.
3080 (avr_frame_unwind_cache): Likewise.
3082 * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
3083 (find_step_target): Initialize it.
3084 (get_data_from_address): Add BYTE_ORDER parameter.
3085 (bdap_prefix): Pass byte order to get_data_from_address.
3086 (handle_prefix_assign_mode_for_aritm_op): Likewise.
3087 (three_operand_add_sub_cmp_and_or_op): Likewise.
3088 (handle_inc_and_index_mode_for_aritm_op): Likewise.
3090 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
3091 (frv_linux_sigcontext_reg_addr): Pass architecture to
3092 frv_linux_pc_in_sigtramp.
3093 (frv_linux_sigtramp_frame_sniffer): Likewise.
3095 * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
3096 (h8300_analyze_prologue): Add GDBARCH parameter. Pass to
3097 h8300_is_argument_spill.
3098 (h8300_frame_cache, h8300_skip_prologue): Pass architecture
3099 to h8300_analyze_prologue.
3101 * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
3102 in_solib_call_trampoline callback.
3103 (hppa_in_solib_call_trampoline): Add GDBARCH parameter.
3104 * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
3106 (hppa64_push_dummy_call): Pass architecture to
3107 hppa64_convert_code_addr_to_fptr.
3108 (hppa_match_insns): Add GDBARCH parameter.
3109 (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
3111 (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
3112 (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
3113 hppa_match_insns_relaxed.
3114 (hppa_stub_unwind_sniffer): Pass architecture to
3115 tdep->in_solib_call_trampoline callback.
3116 * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
3117 (hppa32_hpux_search_dummy_call_sequence): Pass architecture to
3118 hppa_hpux_search_pattern.
3119 * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
3120 (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
3121 Pass to insns_match_pattern.
3122 (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
3123 hppa_linux_sigtramp_find_sigcontext.
3124 (hppa_linux_sigtramp_frame_sniffer): Likewise.
3125 (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
3126 (hppa64_hpux_in_solib_call_trampoline): Likewise.
3128 * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
3129 (i386_analyze_frame_setup): Add GDBARCH parameter.
3130 (i386_analyze_prologue): Add GDBARCH parameter. Pass to
3131 i386_follow_jump and i386_analyze_frame_setup.
3132 (i386_skip_prologue): Pass architecture to i386_analyze_prologue
3133 and i386_follow_jump.
3134 (i386_frame_cache): Pass architecture to i386_analyze_prologue.
3135 (i386_pe_skip_trampoline_code): Add FRAME parameter.
3136 * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
3137 * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
3138 frame to i386_pe_skip_trampoline_code.
3140 * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
3141 to sigcontext_register_address callback.
3142 * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
3143 (ia64_find_unwind_table): Pass architecture to
3144 ia64_find_global_pointer.
3145 (find_extant_func_descr): Add GDBARCH parameter.
3146 (find_func_descr): Pass architecture to find_extant_func_descr
3147 and ia64_find_global_pointer.
3148 (ia64_sigtramp_frame_init_saved_regs): Pass architecture to
3149 tdep->sigcontext_register_address callback.
3150 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
3153 * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
3154 (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
3156 * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
3157 (lm32_skip_prologue, lm32_frame_cache): Pass architecture to
3158 lm32_analyze_prologue.
3160 * m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
3161 (m32r_skip_prologue): Pass architecture to decode_prologue.
3163 * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
3164 (m68hc11_scan_prologue): Pass architecture to
3165 m68hc11_analyze_instruction.
3167 * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
3168 (m68k_analyze_prologue): Pass architecture to
3169 m68k_analyze_frame_setup.
3171 * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
3172 (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
3173 to m88k_fetch_instruction.
3174 (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
3175 (m88k_frame_cache): Likewise.
3177 * mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
3178 (mep_analyze_prologue): Pass architecture to mep_get_insn.
3180 * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
3181 (mips32_next_pc): Pass architecture to mips_fetch_instruction.
3182 (deal_with_atomic_sequence): Likewise.
3183 (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
3184 (mips16_scan_prologue): Likewise.
3185 (mips32_scan_prologue): Likewise.
3186 (mips16_in_function_epilogue_p): Likewise.
3187 (mips32_in_function_epilogue_p): Likewise.
3188 (mips_about_to_return): Likewise.
3189 (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
3190 (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
3191 (mips_skip_prologue): Pass architecture to mips16_scan_prologue
3192 and mips32_scan_prologue.
3193 (mips_in_function_epilogue_p): Pass architecture to
3194 mips16_in_function_epilogue_p and
3195 mips32_in_function_epilogue_p.
3196 (heuristic_proc_start): Pass architecture to mips_fetch_instruction
3197 and mips_about_to_return.
3198 (mips_skip_mips16_trampoline_code): Pass architecture to
3199 mips_fetch_instruction.
3200 (fetch_mips_16): Add GDBARCH parameter.
3201 (mips16_next_pc): Pass architecture to fetch_mips_16.
3202 (extended_mips16_next_pc): Pass architecture to unpack_mips16 and
3205 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
3206 read_objc_methlist_method, read_objc_object, read_objc_super,
3207 read_objc_class): Add GDBARCH parameter.
3208 (find_implementation_from_class): Add GDBARCH parameter, pass
3209 to read_objc_class, read_objc_methlist_nmethods, and
3210 read_objc_methlist_method.
3211 (find_implementation): Add GDBARCH parameter, pass to
3212 read_objc_object and find_implementation_from_class.
3213 (resolve_msgsend, resolve_msgsend_stret): Pass architecture
3214 to find_implementation.
3215 (resolve_msgsend_super, resolve_msgsend_super_stret): Pass
3216 architecture to read_objc_super and find_implementation_from_class.
3218 * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
3219 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
3220 ppc64_standard_linkage3_target): Pass architecture to
3221 ppc64_desc_entry_point.
3222 * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
3223 (skip_prologue): Pass byte order to bl_to_blrl_insn_p.
3224 (rs6000_fetch_instruction): Add GDBARCH parameter.
3225 (rs6000_skip_stack_check): Add GDBARCH parameter, pass to
3226 rs6000_fetch_instruction.
3227 (skip_prologue): Pass architecture to rs6000_fetch_instruction.
3229 * remote-mips.c (mips_store_word): Return old_contents as host
3230 integer value instead of target bytes.
3232 * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
3233 (s390_analyze_prologue): Initialize it.
3234 (extend_simple_arg): Add GDBARCH parameter.
3235 (s390_push_dummy_call): Pass architecture to extend_simple_arg.
3237 * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
3238 * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
3239 (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
3240 * scm-valprint.c (scm_scmval_print): Likewise.
3241 (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
3244 * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
3245 (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
3246 look_for_args_moves.
3247 (sh64_skip_prologue): Pass architecture to
3248 sh64_skip_prologue_hard_way.
3249 * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
3250 (sh_skip_prologue): Pass architecture to sh_analyze_prologue.
3251 (sh_frame_cache): Likewise.
3253 * solib-irix.c (extract_mips_address): Add GDBARCH parameter.
3254 (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
3255 Pass architecture to extract_mips_address.
3257 * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
3258 * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
3259 (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
3260 to sparc_fetch_wcookie.
3261 (sparc32_frame_prev_register): Likewise.
3262 * sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
3263 * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
3264 * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
3266 * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
3267 (spu_skip_prologue): Pass architecture to spu_analyze_prologue.
3268 (spu_virtual_frame_pointer): Likewise.
3269 (spu_frame_unwind_cache): Likewise.
3270 (info_spu_mailbox_list): Add BYTE_ORER parameter.
3271 (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
3272 (info_spu_dma_cmdlist): Add BYTE_ORER parameter.
3273 (info_spu_dma_command, info_spu_proxydma_command): Pass byte order
3274 to info_spu_dma_cmdlist.
3276 * symfile.c (read_target_long_array): Add GDBARCH parameter.
3277 (simple_read_overlay_table, simple_read_overlay_region_table,
3278 simple_overlay_update_1): Pass architecture to read_target_long_array.
3280 * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
3281 (v850_frame_cache): Pass architecture to v850_analyze_prologue.
3283 * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
3285 (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
3286 to xstormy16_analyze_prologue.
3287 (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
3288 (xstormy16_find_jmp_table_entry): Likewise.
3289 (xstormy16_skip_trampoline_code): Pass architecture to
3290 xstormy16_resolve_jmp_table_entry.
3291 (xstormy16_pointer_to_address): Likewise.
3292 (xstormy16_address_to_pointer): Pass architecture to
3293 xstormy16_find_jmp_table_entry.
3295 * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
3296 (call0_analyze_prologue): Add GDBARCH parameter, pass to
3298 (call0_frame_cache): Pass architecture to call0_analyze_prologue.
3299 (xtensa_skip_prologue): Likewise.
3301 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3303 * defs.h (strlen_paddr, paddr, paddr_nz): Remove.
3304 (paddress): Add GDBARCH parameter.
3305 * utils.c (strlen_paddr, paddr, paddr_nz): Remove.
3306 (paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
3307 * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
3308 * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
3309 use it instead of current_gdbarch.
3311 Update calls to ui_out_field_core_addr to pass architecture:
3312 * ada-lang.c (print_one_exception): Update.
3313 * breakpoint.c (print_one_breakpoint_location,
3314 print_one_exception_catchpoint): Update.
3315 * disasm.c (dump_insns): Update.
3316 * darwin-nat-info.c (darwin_debug_regions_recurse): Update.
3317 * mi/mi-main.c (mi_cmd_data_read_memory): Update.
3318 * mi/mi-symbol-cmds.c: Include "objfiles.h".
3319 (mi_cmd_symbol_list_lines): Update.
3320 * stack.c (print_frame_info, print_frame): Update.
3322 Update callers of paddress to pass architecture:
3323 * ada-tasks.c (info_task): Update.
3324 * ada-valprint.c (ada_val_print_1): Update.
3325 * annotate.c (annotate_source, annotate_frame_begin): Update.
3326 * breakpoint.c (insert_bp_location, describe_other_breakpoints,
3328 * cli/cli-cmds.c (edit_command, list_command, print_disassembly):
3330 * corefile.c (memory_error): Update.
3331 * c-valprint.c (print_function_pointer_address, c_val_print): Update.
3332 * disasm.c (dis_asm_print_address): Update.
3333 * exec.c (print_section_info): Update.
3334 * f-valprint.c (f_val_print): Update.
3335 * infcmd.c: Include "arch-utils.h".
3336 (jump_command, program_info): Update.
3337 * linux-fork.c: Include "arch-utils.h".
3338 (info_forks_command): Update.
3339 * m2-valprint.c (print_function_pointer_address,
3340 print_unpacked_pointer, print_variable_at_address,
3341 m2_val_print): Update.
3342 * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
3344 * printcmd.c (print_address, print_address_demangle, address_info):
3346 * p-valprint.c (pascal_val_print): Update.
3347 * source.c: Include "arch-utils.h".
3348 (line_info): Update.
3349 * stack.c (frame_info, print_block_frame_labels): Update.
3350 * symfile.c (add_symbol_file_command, list_overlays_command): Update.
3351 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
3352 print_symbol, print_partial_symbols, maintenance_info_psymtabs,
3353 maintenance_check_symtabs): Update.
3354 * symtab.c (find_pc_sect_symtab): Update.
3355 * target.c (deprecated_debug_xfer_memory): Update.
3356 * tracepoint.c (scope_info): Update.
3357 * tui/tui-stack.c (tui_make_status_line): Update.
3358 * valprint.c (val_print_string): Update.
3360 Update callers of paddr_nz to use paddress instead (keeping
3361 user-visible output identical):
3362 * alpha-tdep.c (alpha_heuristic_proc_start): Update.
3363 * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
3364 amd64_displaced_step_fixup): Update.
3365 * arch-utils.c (simple_displaced_step_copy_insn): Update.
3366 * auxv.c (fprint_target_auxv): Update.
3367 * breakpoint.c (insert_single_step_breakpoint): Update.
3368 * buildsym.c (finish_block): Update.
3369 * cli/cli-dump.c (restore_section_callback): Update.
3370 * fbsd-nat.c (fbsd_find_memory_regions): Update.
3371 * frame.c (frame_unwind_register_value): Update.
3372 * gcore.c (gcore_create_callback): Update.
3373 * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
3374 * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
3375 i386_record_lea_modrm_addr, i386_record_lea_modrm,
3376 i386_process_record): Update.
3377 * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
3378 ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
3379 ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
3380 * infrun.c (displaced_step_prepare, displaced_step_fixup,
3381 handle_inferior_event, insert_step_resume_breakpoint_at_sal,
3382 insert_longjmp_resume_breakpoint): Update.
3383 * linux-nat.c (linux_nat_find_memory_regions): Update.
3384 * linux-record.c (record_linux_system_call): Update.
3385 * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
3386 mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
3387 mips_o64_push_dummy_call): Update.
3388 * monitor.c (monitor_error, monitor_remove_breakpoint): Update.
3389 * record.c (record_arch_list_add_mem, record_wait,
3390 record_xfer_partial): Update.
3391 * remote-mips.c (mips_fetch_word, mips_check_lsi_error,
3392 mips_common_breakpoint): Update.
3393 * remote-sim.c (gdbsim_xfer_inferior_memory): Update.
3394 * rs6000-tdep.c (ppc_displaced_step_fixup): Update.
3395 * solib-som.c (som_current_sos): Update.
3396 * symfile.c (load_progress, generic_load): Update.
3397 * symfile-mem.c (add_vsyscall_page): Update.
3398 * valops.c (value_fetch_lazy): Update.
3399 * windows-tdep.c (windows_xfer_shared_library): Update.
3401 Update callers of paddr_nz to use paddress instead (changing
3402 user-visible output to make it more correct):
3403 * dwarf2loc.c (locexpr_describe_location): Update.
3404 * ia64-tdep.c (ia64_memory_insert_breakpoint,
3405 ia64_memory_remove_breakpoint): Update.
3406 * jv-valprint.c (java_value_print): Update.
3407 * m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
3408 * monitor.c (monitor_read_memory): Update.
3410 Update callers of paddr to use paddress instead (changing
3411 user-visible output to make it more correct):
3412 * arm-tdep.c (arm_push_dummy_call): Update.
3413 * breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
3414 create_breakpoint): Update.
3415 * darwin-nat-info.c (darwin_debug_regions): Update.
3416 * dcache.c (dcache_info): Update.
3417 * dsrec.c (load_srec, make_srec): Update.
3418 * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
3419 dwarf2_frame_cache): Update.
3420 * gcore.c (gcore_copy_callback): Update.
3421 * gnu-nat.c (gnu_xfer_memory): Update.
3422 * mips-linux-nat.c (mips_show_dr): Update.
3423 * monitor.c (monitor_write_memory, monitor_insert_breakpoint,
3424 monitor_remove_breakpoint): Update.
3425 * remote.c (compare_sections_command): Update.
3426 * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
3427 m32r_remove_breakpoint, m32r_insert_watchpoint,
3428 m32r_remove_watchpoint): Update.
3429 * sol-thread.c (info_cb): Update.
3430 * symfile.c (load_progress): Update.
3432 Update callers of paddress or paddr_nz to use hex_string instead
3433 (changes output of internal/error/debug messages only):
3434 * dwarf2read.c (dump_die_shallow): Update.
3435 * frame.c (fprint_field, fprint_frame, frame_pc_unwind,
3436 get_frame_func, create_new_frame): Update.
3437 * hppa-tdep.c (find_unwind_entry, unwind_command): Update.
3438 * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
3439 ia64_get_dyn_info_list): Update.
3440 * maint.c (maintenance_translate_address): Update.
3441 * mi/mi-cmd-var.c (mi_cmd_var_create): Update.
3442 * target.c (target_flash_erase): Update.
3444 Update callers of paddr/paddr_nz to use phex/phex_nz instead,
3445 using an appropriate address size. Remove use of strlen_paddr.
3446 * exec.c (exec_files_info): Update.
3447 * i386-nat.c (i386_show_dr): Update.
3448 * remote.c (remote_flash_erase): Update.
3449 * m32r-rom.c (m32r_load_section): Update.
3450 * monitor.c (monitor_vsprintf, monitor_store_register): Update.
3451 * remote.c (remote_check_symbols, remote_search_memory): Update.
3452 * remote-mips.c (mips_request, mips_common_breakpoint): Update.
3453 * scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
3454 * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
3455 * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
3456 sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
3457 sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
3458 sh_dsp_show_regs): Update.
3459 * xcoffsolib.c (sharedlibrary_command): Update.
3462 * maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
3463 Use hex_string_custom instead of paddr.
3464 (print_bfd_section_info): Pass address size.
3465 (print_objfile_section_info): Likewise.
3467 * annotate.h (annotate_source): Add GDBARCH parameter.
3468 (annotate_frame_begin): Likewise.
3469 * annotate.c (annotate_source): Add GDBARCH parameter.
3470 (annotate_frame_begin): Likewise.
3471 * source.c (identify_source_line): Update call to annotate_source.
3472 * stack.c (print_frame_info, print_frame): Update call to
3473 annotate_frame_begin.
3475 * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
3476 (create_breakpoint, create_ada_exception_breakpoint): Update call.
3478 * stack.c (print_block_frame_labels): Add GDBARCH parameter.
3479 (print_frame_label_vars): Update call.
3481 * symmisc.c (print_partial_symbols): Add GDBARCH parameter.
3482 (dump_psymtab): Update call to print_partial_symbols.
3483 (struct print_symbol_args): Add GDBARCH member.
3484 (dump_symtab_1): Set print_symbol_args architecture member.
3485 (print_symbol): Use it.
3487 * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
3489 * windows-tdep.c (windows_xfer_shared_library): Likewise.
3490 * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
3491 (core_process_module_section): Pass architecture from cpms_data to
3492 windows_xfer_shared_library.
3493 (windows_core_xfer_shared_libraries): Initialize cmps_data
3494 architecture member.
3495 * windows-nat.c (windows_xfer_shared_libraries): Pass architecture
3496 to windows_xfer_shared_library.
3498 * defs.h (print_address): Add GDBARCH parameter.
3499 * printcmd.c (print_address): Add GDBARCH parameter.
3500 (print_scalar_formatted, do_examine): Update call.
3501 * findcmd.c (find_command): Update call.
3502 * tracepoint.c: Include "arch-utils.h".
3503 (trace_find_line_command): Update call.
3504 * tui/tui-disasm.c (tui_disassemble): Update call.
3506 * value.h (print_address_demangle): Add GDBARCH parameter.
3507 * printcmd.c (print_address_demangle): Add GDBARCH parameter.
3508 * c-valprint.c (print_function_pointer_address, c_val_print):
3510 * f-valprint.c (f_val_print): Update call.
3511 * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
3512 * jv-valprint.c (java_val_print): Update call.
3513 * m2-valprint.c (print_function_pointer_address, m2_val_print):
3515 * p-valprint.c (pascal_val_print): Update call.
3517 * disasm.c (gdb_disassemble_info): Install architecture into
3518 di.application_data field.
3520 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3522 * disasm.h (gdb_disassembly): Add GDBARCH parameter.
3523 (gdb_print_insn): Likewise.
3524 * disasm.c (dump_insns): Add GDBARCH parameter. Use it instead
3526 (do_mixed_source_and_assembly): Add GDBARCH parameter. Pass to
3528 (do_assembly_only): Likewise.
3529 (gdb_disassembly): Add GDBARCH parameter. Use it instead of
3530 current_gdbarch. Pass to subroutines.
3531 (gdb_print_insn): Add GDBARCH parameter. Use it instead of
3534 * stack.c (struct gdb_disassembly_stub_args): Add GDBARCH member.
3535 (gdb_disassembly_stub): Pass architecture to gdb_disassembly.
3536 (do_gdb_disassembly): Add GDBARCH argument. Store into args.
3537 (print_frame_info): Pass architecture to do_gdb_disassembly.
3539 * printcmd.c (print_formatted): Pass architecture to gdb_print_insn.
3541 * mi/mi-cmd-disas.c: Include "arch-utils.h"
3542 (mi_cmd_disassemble): Pass architecture to gdb_disassembly.
3544 * cli/cli-cmds.c: Include "arch-utils.h".
3545 (print_disassembly): Add GDBARCH parameter. Pass to gdb_disassembly
3546 and tui_show_assembly.
3547 (disassemble_current_function): Pass architecture to
3548 tui_get_low_disassembly_address and print_disassembly.
3549 (disassemble_command): Pass architecture to
3550 tui_get_low_disassembly_address and print_disassembly.
3552 * tui/tui.c (tui_show_assembly): Add GDBARCH parameter. Pass to
3553 tui_update_source_windows_with_addr.
3555 * tui/tui-data.h (struct tui_locator_element): Add GDBARCH member.
3556 (struct tui_source_info): Likewise.
3557 * tui/tui-data.c (tui_clear_win_detail): Clear source_info.gdbarch.
3559 * tui/tui-disasm.c (tui_disassemble): Add GDBARCH parameter.
3560 Pass to gdb_print_insn.
3561 (tui_find_disassembly_address): Add GDBARCH parameter. Pass to
3563 (tui_set_disassem_content): Add GDBARCH parameter. Install into
3564 source_info.gdbarch. Pass to tui_disassemble.
3565 (tui_show_disassem): Add GDBARCH parameter. Pass to
3566 tui_update_source_window.
3567 (tui_show_disassem_and_update_source): Add GDBARCH parameter. Pass to
3568 tui_show_disassem and tui_update_source_window.
3570 (tui_get_begin_asm_address): Return locator architecture in addition
3571 to locator PC value.
3573 (tui_get_low_disassembly_address): Add GDBARCH parameter. Pass to
3574 tui_get_low_disassembly_address.
3576 (tui_vertical_disassem_scroll): Pass architecture to subroutines.
3578 * tui/tui-disasm.h (tui_set_disassem_content): Add GDBARCH parameter.
3579 (tui_show_disassem): Likewise.
3580 (tui_show_disassem_and_update_source): Likewise.
3581 (tui_get_begin_asm_address): Return architecture and PC value.
3583 * tui/tui.h (tui_get_low_disassembly_address): Add GDBARCH parameter.
3584 (tui_show_assembly): Add GDBARCH parameter.
3586 * tui/tui-layout.c (extract_display_start_addr): Return current window
3587 architecture in addition to current PC value.
3589 (tui_set_layout): Update calls to tui_get_low_disassembly_address and
3590 extract_display_start_addr. Pass architecture to
3591 tui_update_source_windows_with_addr.
3593 * tui/tui-source.c: Include "objfiles.h".
3594 (tui_set_source_content): Initialize window architecture.
3595 (tui_show_symtab_source): Add GDBARCH parameter. Pass to
3596 tui_update_source_window_as_is
3598 * tui/tui-source.h (tui_show_symtab_source): Add GDBARCH parameter.
3600 * tui/tui-stack.c (tui_set_locator_info): Add GDBARCH parameter.
3601 Install locator architecture.
3602 (tui_set_locator_filename): Update call.
3603 (tui_show_frame_info): Pass architecture to tui_set_locator_info
3606 * tui/tui-win.c (make_visible_with_new_height): Pass architecture
3607 to tui_update_source_window.
3609 * tui/tui-winsource.c: Include "objfiles.h".
3610 (tui_display_main): Update call to tui_get_begin_asm_address.
3611 Pass architecture to tui_update_source_windows_with_addr.
3612 (tui_update_source_window): Add GDBARCH parameter. Pass to
3613 tui_update_source_window_as_is.
3614 (tui_update_source_window_as_is): Add GDBARCH parameter.
3615 Pass to tui_set_disassem_content.
3616 (tui_update_source_windows_with_addr): Add GDBARCH parameter.
3617 Pass to subroutines.
3618 (tui_update_source_windows_with_line): Pass objfile architecture
3620 (tui_horizontal_source_scroll): Pass architecture to
3621 tui_update_source_window_as_is.
3623 * tui/tui-winsource.h (tui_update_source_window): Add GDBARCH
3625 (tui_update_source_window_as_is): Likewise.
3626 (tui_update_source_windows_with_addr): Likewise.
3628 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3630 * breakpoint.h (struct breakpoint): New member GDBARCH.
3631 * breakpoint.c: Include "arch-utils.h".
3632 (set_raw_breakpoint_without_location): Add GDBARCH parameter.
3633 Use it to set breakpoint architecture.
3634 (set_raw_breakpoint): Add GDBARCH parameter.
3635 (create_internal_breakpoint): Likewise.
3636 (create_catchpoint): Likewise.
3637 (create_fork_vfork_event_catchpoint): Likewise.
3638 (create_breakpoint): Likewise.
3639 (create_breakpoints): Likewise.
3640 (break_command_really): Likewise.
3641 (create_ada_exception_breakpoint): Likewise.
3642 Update local callers to pass architecture:
3643 (create_internal_breakpoint): Update.
3644 (create_overlay_event_breakpoint): Update.
3645 (create_longjmp_master_breakpoint): Update.
3646 (create_thread_event_breakpoint): Update.
3647 (create_solib_event_breakpoint): Update.
3648 (create_catchpoint): Update.
3649 (create_fork_vfork_event_catchpoint): Update.
3650 (set_momentary_breakpoint): Update.
3651 (clone_momentary_breakpoint): Update.
3652 (create_breakpoint): Update.
3653 (create_breakpoints): Update.
3654 (break_command_really): Update.
3655 (break_command_1): Update.
3656 (set_breakpoint): Update.
3657 (watch_command_1): Update.
3658 (catch_fork_command_1): Update.
3659 (catch_exec_commnd_1): Update.
3660 (handle_gnu_v3_exceptions): Update.
3661 (create_ada_exception_breakpoint): Update.
3662 (catch_ada_exception_command): Update.
3663 (catch_assert_command): Update.
3664 (trace_command): Update.
3666 * breakpoint.h (struct bp_location): New member GDBARCH.
3667 * breakpoint.c (get_sal_arch): New function.
3668 (set_raw_breakpoint): Set location architecture.
3669 (add_location_to_breakpoint): Likewise.
3670 (clone_momentary_breakpoint): Likewise.
3671 (watch_command_1): Likewise.
3672 (update_watchpoint): Likewise.
3673 (bp_loc_is_permanent): Use location architecture instead of
3675 (adjust_breakpoint_address): Add GDBARCH parameter; use it
3676 instead of current_gdbarch.
3677 Update callers of adjust_breakpoint_address to pass
3678 breakpoint location architecture:
3679 (set_raw_breakpoint): Update.
3680 (watch_command_1): Update.
3682 * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
3684 (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
3685 (encode_actions): Pass tracepoint architecture to add_local_symbols
3686 (encode_actions): Use tracepoint architecture instead of
3687 current_gdbarch. Pass it to add_local_symbols and collect_symbol.
3689 * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
3690 of print_one callback with last_loc.
3691 * breakpoint.c (print_one_breakpoint_location): Replace last_addr
3692 parameter with last_loc.
3693 (print_one_breakpoint): Likewise.
3694 (do_captured_breakpoint_query): Update call.
3695 (breakpoint_1): Pass last_loc instead of last_addr to
3696 print_one_breakpoint. Pass last location architecture instead of
3697 current_gdbarch to set_next_address.
3698 Update all implementations of the print_one callback:
3699 * breakpoint.c (print_one_catch_fork): Update.
3700 (print_one_catch_vfork): Update.
3701 (print_one_catch_exec): Update.
3702 (print_one_exception_catchpoint): Update.
3703 * ada-lang.c (print_one_exception): Update.
3704 (print_one_catch_exception): Update.
3705 (print_one_catch_exception_unhandled): Update.
3706 (print_one_catch_assert): Update.
3708 * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
3709 parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
3710 (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
3711 to print_one_breakpoint_location.
3712 (breakpoint_address_bits): New function.
3713 (do_captured_breakpoint_query): Compute number of address bits to print
3714 and pass it to print_one_breakpoint.
3715 (breakpoint_1): Likewise. Use it instead of current_gdbarch.
3717 * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
3718 * breakpoint.c (create_thread_event_breakpoint): Likewise.
3719 Update callers to create_thread_event_breakpoint:
3720 * aix-thread.c (pd_enable): Update.
3721 * linux-thread-db.c (enable_thread_event): Update.
3723 * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
3724 * breakpoint.c (create_solib_event_breakpoint): Likewise.
3725 Update callers to create_solib_event_breakpoint:
3726 * solib-frv.c (enable_break, enable_break2): Update.
3727 * solib-pa64.c (pa64_solib_create_inferior_hook): Update.
3728 * solib-som.c (som_solib_create_inferior_hook): Update.
3729 * solib-darwin.c (darwin_solib_create_inferior_hook): Update.
3730 * solib-svr4.c (enable_break): Update.
3732 * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
3733 * breakpoint.c (insert_single_step_breakpoint): Likewise.
3734 Update callers to insert_single_step_breakpoint:
3735 * alpha-tdep.c (alpha_software_single_step): Update.
3736 * arm-linux-tdep.c (arm_linux_software_single_step): Update.
3737 * arm-tdep.c (arm_software_single_step): Update.
3738 * cris-tdep.c (cris_software_single_step): Update.
3739 * rs6000-aix-tdep.c (rs6000_software_single_step): Update.
3740 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
3741 * sparc-tdep.c (sparc_software_single_step): Update.
3742 * spu-tdep.c (spu_software_single_step): Update.
3743 * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
3744 Pass it to insert_single_step_breakpoint.
3745 (mips_software_single_step): Pass architecture to
3746 deal_with_atomic_sequence and insert_single_step_breakpoint.
3748 * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
3749 (deprecated_remove_raw_breakpoint): Likewise.
3750 * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
3751 (deprecated_remove_raw_breakpoint): Likewise.
3752 Update callers to deprecated_insert_raw_breakpoint and
3753 deprecated_remove_raw_breakpoint:
3754 * breakpoint.c (single_step_gdbarch): New static variable.
3755 (insert_single_step_breakpoint): Pass GDBARCH parameter to
3756 deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
3757 (remove_single_step_breakpoints): Pass architecture stored in
3758 single_step_gdbarch to deprecated_remove_raw_breakpoint.
3759 * rs6000-nat.c (exec_one_dummy_insn): Update.
3760 * solib-irix.c (enable_break, disable_break): Update.
3761 * procfs.c (procfs_mourn_inferior): Update.
3762 (remove_dbx_link_breakpoint): Update.
3764 * breakpoint.h (set_breakpoint): Add GDBARCH parameter.
3765 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
3766 * breakpoint.c (set_breakpoint): Add GDBARCH parameter.
3767 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
3768 Update callers to set_breakpoint, set_momentary_breakpoint and
3769 set_momentary_breakpoint_at_pc:
3770 * breakpoint.c (set_momentary_breakpoint_at_pc): Update.
3771 (until_break_command): Update.
3772 * infcall.c (call_function_by_hand): Update.
3773 * infcmd.c (finish_backward, finish_forward): Update.
3774 * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
3775 parameter. Pass it to set_momentary_breakpoint.
3776 (insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
3777 Pass it to set_momentary_breakpoint_at_pc.
3778 (handle_inferior_event): Update.
3779 (insert_step_resume_breakpoint_at_frame): Update.
3780 (insert_step_resume_breakpoint_at_caller): Update..
3781 * mi/mi-cmd-break.c: Include "arch-utils.h".
3782 (mi_cmd_break_insert): Update.
3784 * target.h (struct target_ops): Add GDBARCH parameter to
3785 to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
3786 and to_remove_hw_breakpoint members.
3787 (target_insert_breakpoint, target_remove_breakpoint,
3788 target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
3789 parameter, pass to target routine.
3790 (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
3792 * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
3793 debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
3794 GDBARCH parameter, pass to target routine.
3795 (update_current_target): Update function signature.
3796 * breakpoint.c (insert_bp_location, remove_breakpoint,
3797 deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
3798 Pass architecture to target_ routines.
3799 Update all implementations of the target breakpoint routines to take
3800 GDBARCH parameter and use it instead of GDBARCH as appropriate:
3801 * corelow.c (ignore): Update.
3802 * exec.c (ignore): Update.
3803 * mem-break.c (memory_insert_breakpoint): Update.
3804 (memory_remove_breakpoint): Update.
3805 * monitor.c (monitor_insert_breakpoint): Update.
3806 (monitor_remove_breakpoint): Update.
3807 * record.c (record_insert_breakpoint): Update.
3808 (record_beneath_to_insert_breakpoint): Update.
3809 (record_remove_breakpoint): Update.
3810 (record_beneath_to_remove_breakpoint): Update.
3811 * remote.c (remote_insert_breakpoint): Update.
3812 (remote_remove_breakpoint): Update.
3813 (remote_insert_hw_breakpoint): Update.
3814 (remote_remove_hw_breakpoint): Update.
3815 * remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
3816 (m32r_remove_breakpoint): Update.
3817 * remote-mips.c (mips_insert_breakpoint): Update.
3818 (mips_remove_breakpoint): Update.
3819 * i386-nat.c (i386_insert_hw_breakpoint): Update.
3820 (i386_remove_hw_breakpoint): Update.
3821 * nto-procfs.c (procfs_insert_breakpoint): Update.
3822 (procfs_remove_breakpoint): Update.
3823 (procfs_insert_hw_breakpoint): Update.
3824 (procfs_remove_hw_breakpoint): Update.
3826 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3828 * frame.h (frame_unwind_arch): New.
3829 (frame_unwind_caller_arch): Likewise.
3830 * frame-unwind.h (frame_prev_arch_ftype): New type.
3831 (struct frame_unwind): New member prev_arch.
3832 * frame.c (struct frame_info): New member prev_arch.
3833 (frame_unwind_arch): New function.
3834 (frame_unwind_caller_arch): Likewise..
3835 (get_frame_arch): Reimplement in terms of frame_unwind_arch.
3836 * sentinel-frame.c (sentinel_frame_prev_arch): New function.
3837 (sentinel_frame_unwinder): Install it.
3839 * frame.c (frame_pc_unwind): Use frame_unwind_arch instead
3841 (frame_unwind_register_value): Likewise.
3842 (frame_unwind_register_signed): Likewise.
3843 (frame_unwind_register_unsigned): Likewise.
3844 * frame-unwind.c (frame_unwind_got_optimized): Likewise.
3845 (frame_unwind_got_register): Likewise.
3846 (frame_unwind_got_constant): Likewise.
3847 (frame_unwind_got_bytes): Likewise.
3848 (frame_unwind_got_address): Likewise.
3850 * frame.h (enum frame_type): New value ARCH_FRAME.
3851 * frame.c (fprint_frame_type): Handle ARCH_FRAME.
3852 * stack.c (print_frame_info): Likewise.
3854 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3856 * target.h (struct target_ops): New member to_thread_architecture.
3857 (target_thread_architecture): New macro.
3858 * target.c (update_current_target): Inherit to_thread_architecture.
3859 (default_thread_architecture): New function.
3860 (debug_to_thread_architecture): New function.
3861 (setup_target_debug): Handle to_thread_architecture.
3863 * regcache.h (get_thread_arch_regcache): New.
3864 * regcache.c (struct regcache_list): New data type.
3865 (current_regcache): Hold regcache list instead of single regcache.
3866 (current_thread_ptid, current_thread_arch): New static variables.
3867 (get_thread_arch_regcache): New function.
3868 (get_thread_regcache): Use it. Call target_thread_architecture.
3869 (regcache_thread_ptid_changed): Update to current_regcache changes.
3870 (registers_changed): Likewise. Reset current_thread_arch and
3871 current_thread_ptid.
3873 * remote.c (remote_wait): Access target registers in target_gdbarch.
3874 * linux-nat.c (linux_nat_do_thread_registers): Likewise.
3875 * proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
3876 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
3877 * sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
3878 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
3879 * solib-svr4.c (enable_break): Likewise.
3880 (svr4_relocate_main_executable): Likewise.
3882 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3884 * python/python-internal.h (struct language_defn): Declare.
3885 (python_gdbarch, python_language): Likewise.
3886 (ensure_python_env): Add prototype.
3887 (make_cleanup_py_restore_gil): Remove prototype.
3889 * python/python.c: Include "arch-utils.h", "value.h" and "language.h".
3890 (python_gdbarch, python_language): New global variables.
3891 (struct python_env): New data type.
3892 (ensure_python_env, restore_python_env): New functions.
3893 (eval_python_from_control_command): Call ensure_python_env to
3894 install current architecture and language.
3895 (python_command, gdbpy_new_objfile): Likewise.
3896 * python/python-cmd.c: Include "arch-utils.h" and "language.h".
3897 (cmdpy_destroyer, cmdpy_function, cmdpy_completer): Call
3899 * python/python-type.c (clean_up_objfile_types): Likewise.
3900 * python/python-objfile.c: Include "language.h".
3901 (clean_up_objfile): Call ensure_python_env.
3902 * python/python-prettyprint.c (apply_val_pretty_printer): Likewise.
3903 (apply_varobj_pretty_printer): Do not call PyGILState_Ensure.
3904 * varobj.c (varobj_ensure_python_env): New helper function.
3905 (varobj_get_display_hint, update_dynamic_varobj_children,
3906 install_default_visualizer, varobj_set_visualizer, free_variable,
3907 value_get_print_value): Call it.
3908 (value_get_print_value): Add varobj argument instead of pretty
3909 printer argument. Update all callers.
3911 * python/python-utils.c (py_gil_restore, make_cleanup_py_restore_gil):
3914 * value.h (internal_function_fn): Add GDBARCH and LANGUAGE argument.
3915 (call_internal_function): Likewise.
3916 * value.c (call_internal_function): Likewise. Pass to handler.
3917 * eval.c (evaluate_subexp_standard): Update call.
3918 * python/python-function.c: Include "language.h".
3919 (fnpy_call): Add GDBARCH and LANGAUAGE arguments and call
3920 make_cleanup_python_env.
3922 * python/python-value.c (builtin_type_pyint, builtin_type_pyfloat,
3923 builtin_type_pylong, builtin_type_pybool, builtin_type_pychar,
3924 valpy_str): Use python_gdbarch and python_language instead of
3925 current_gdbarch and current_language.
3926 * python/python-type.c (typy_lookup_typename): Likewise.
3928 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3930 * arch-utils.c (selected_byte_order): Return target_byte_order_user.
3931 (show_endian): Use target_byte_order_user if specified; otherwise
3932 use get_current_arch () instead of current_gdbarch.
3933 (show_architecture): Use set_architecture_string if specified;
3934 otherwise use get_current_arch () instead of current_gdbarch.
3935 (get_current_arch): New function.
3936 * arch-utils.h (get_current_arch): Add prototype.
3938 * osabi.c (show_osabi): Use get_current_arch () instead of
3941 * findcmd.c: Include "arch-utils.h".
3942 (parse_find_args): Add BIG_P argument. Use it instead of byte order
3944 (find_command): Use get_current_arch () instead of current_gdbarch.
3945 Pass byte order to parse_find_args.
3947 * maint.c: Include "arch-utils.h".
3948 (maintenance_print_architecture): Use get_current_arch () instead
3951 * reggroups.c: Include "arch-utils.h".
3952 (maintenance_print_reggroups): Use get_current_arch () instead
3955 * symfile.c: Include "arch-utils.h".
3956 (overlay_load_command): Use get_current_arch () instead of
3959 * value.c: Include "arch-utils.h".
3960 (show_convenience): Use get_current_arch () instead of
3963 * tui/tui-regs.c: Include "arch-utils.h".
3964 (tui_reg_next_command): Use get_current_arch () instead of
3967 * mi/mi-main.c: Include "arch-utils.h".
3968 (mi_cmd_data_read_memory): Use get_current_arch () instead of
3971 * parse.c: Include "arch-utils.h".
3972 (parse_exp_in_context): Use get_current_arch () instead of
3975 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3977 * gdbtypes.c (make_pointer_type, make_reference_type,
3978 smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
3979 Use type architecture instead of current_gdbarch.
3981 * gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
3982 Add GDBARCH paramter.
3983 * gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
3984 Add GDBARCH parameter. Use it instead of current_gdbarch.
3985 * c-typeprint.c (c_type_print_modifier): Update call.
3986 * parse.c (push_type_address_space): Likewise.
3988 * findvar.c (extract_typed_address, store_typed_address): Use type
3989 architecture instead of current_gdbarch.
3991 * value.c (value_as_address, unpack_field_as_long): Use type architecture
3992 instead of current_gdbarch.
3994 * doublest.c (floatformat_from_length): Add GDBARCH argument. Use it
3995 instead of current_gdbarch.
3996 (floatformat_from_type): Pass type architecture.
3998 * infcall.c (find_function_addr): Use type architecture instead
4001 * valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
4002 value_bit_index): Use type architecture instead of current_gdbarch.
4003 * valops.c (value_cast, value_slice): Likewise.
4005 * value.h (modify_field): Add TYPE argument.
4006 * value.c (modify_field): Add TYPE argument. Use type architecture
4007 instead of current_gdbarch.
4008 (set_internalvar_component): Likewise.
4009 * eval.c (evaluate_struct_tuple): Update call.
4010 * valops.c (value_assign): Likewise.
4011 * ada-lang.c (modify_general_field): Likewise. Add TYPE argument.
4012 (make_array_descriptor): Update calls.
4013 (move_bits): Add BITS_BIG_ENDIAN_P argument. Use it instead of
4015 (ada_value_assign, value_assign_to_component): Update calls.
4016 (decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
4017 value_assign_to_component): Use type arch instead of current_gdbarch.
4019 * printcmd.c (float_type_from_length): Remove GDBARCH argument,
4020 use type architecture instead.
4021 (print_scalar_formatted, printf_command): Update calls. Use type
4022 architecture instead of current_gdbarch.
4023 * valprint.c (val_print_type_code_int): Use type architecture
4024 instead of current_gdbarch.
4025 * varobj.c (value_get_print_value): Likewise.
4026 * python/python-prettyprint.c (print_string_repr): Add GDBARCH
4027 argument. Use it instead of current_gdbarch.
4028 (apply_val_pretty_printer): Update call.
4030 * ada-valprint.c (ada_val_print_1): Use type architecture instead
4032 * c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
4033 Use it instead of current_gdbarch.
4034 (c_val_print): Update calls passing type architecture.
4035 * f-valprint.c (f_val_print): Use type architecture instead of
4037 * jv-valprint (java_value_print): Likewise.
4038 * m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
4039 Use it instead of current_gdbarch.
4040 (print_unpacked_pointer): Update calls passing type architecture.
4041 * scm-valprint.c (scm_scmval_print): Use type architecture instead of
4044 * gnu-v3-abi.c (get_class_arch): Remove.
4045 (gnuv3_rtti_type): Use get_type_arch instead of get_class_arch. Remove
4046 special-case check for Java classes.
4047 (gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
4048 gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
4049 Use get_type_arch instead of get_class_arch.
4051 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4053 * gdbtypes.h (TYPE_OBJFILE_OWNED, TYPE_OWNER): New macros.
4054 (TYPE_OBJFILE, TYPE_ALLOC, TYPE_ZALLOC): Reimplement.
4055 (alloc_type_arch): Add prototype.
4056 (alloc_type_copy): Likewise.
4057 (get_type_arch): Likewise.
4058 (arch_type): Likewise.
4059 (arch_integer_type): Likewise.
4060 (arch_character_type): Likewise.
4061 (arch_boolean_type): Likewise.
4062 (init_float_type): Remove, replace by ...
4063 (arch_float_type): ... this.
4064 (init_complex_type): Remove, replace by ...
4065 (arch_complex_type): ... this.
4066 (init_flags_type): Remove, replace by ...
4067 (arch_flags_type): ... this.
4068 (init_composite_type): Remove, replace by ...
4069 (arch_composite_type): ... this.
4071 * gdbtypes.c (alloc_type): No longer support NULL objfile.
4072 (init_type): Likewise.
4073 (alloc_type_arch): New function.
4074 (alloc_type_copy): New function.
4075 (get_type_arch): New function.
4077 (smash_type): Preserve type ownership information.
4078 (make_pointer_type, make_reference_type, make_function_type,
4079 smash_to_memberptr_type, smash_to_method_type): No longer
4080 preserve OBJFILE across smash_type calls.
4081 (make_pointer_type, make_reference_type, make_function_type,
4082 lookup_memberptr_type, lookup_methodptr_type, allocate_stub_method,
4083 create_range_type, create_array_type, create_set_type, copy_type):
4084 Use alloc_type_copy when allocating types.
4085 (check_typedef): Use alloc_type_arch.
4086 (copy_type_recursive): Likewise. Preserve type ownership data
4088 (recursive_dump_type): Dump type ownership data.
4089 (alloc_type_instance): Update type ownership check.
4090 (copy_type, copy_type_recursive): Likewise.
4092 (arch_type): New function.
4093 (arch_integer_type): Likewise.
4094 (arch_character_type): Likewise.
4095 (arch_boolean_type): Likewise.
4096 (init_float_type): Remove, replace by ...
4097 (arch_float_type): ... this.
4098 (init_complex_type): Remove, replace by ...
4099 (arch_complex_type): ... this.
4100 (init_flags_type): Remove, replace by ...
4101 (arch_flags_type): ... this.
4102 (append_flags_type_flag): Move down.
4103 (init_composite_type): Remove, replace by ...
4104 (arch_composite_type): ... this.
4105 (append_composite_type_field_aligned,
4106 append_composite_type_field): Move down.
4108 * gdbarch.c (gdbtypes_post_init): Allocate all types
4109 using per-architecture routines.
4110 * ada-lang.c (ada_language_arch_info): Likewise.
4111 * f-lang.c (build_fortran_types): Likewise.
4112 * jv-lang.c (build_java_types): Likewise.
4113 * m2-lang.c (build_m2_types): Likewise.
4114 * scm-lang.c (build_scm_types): Likewise.
4116 * ada-lang.c (ada_type_of_array): Use alloc_type_copy.
4117 (packed_array_type): Likewise.
4118 (ada_template_to_fixed_record_type_1): Likewise.
4119 (template_to_static_fixed_type): Likewise.
4120 (to_record_with_fixed_variant_part): Likewise.
4121 (to_fixed_variant_branch_type): Likewise.
4122 (to_fixed_array_type): Likewise.
4123 (to_fixed_range_type): Likewise.
4124 (empty_record): Use type instead of objfile argument.
4125 Use alloc_type_copy.
4126 (to_fixed_variant_branch_type): Update call to empty_record.
4127 * jv-lang.c (type_from_class): Use alloc_type_arch.
4129 * arm-tdep.c (arm_ext_type): Allocate per-architecture type.
4130 * i386-tdep.c (i386_eflags_type, i386_mxcsr_type, i387_ext_type,
4131 i386_mmx_type, i386_sse_type): Likewise.
4132 * ia64-tdep.c (ia64_ext_type): Likewise.
4133 * m32c-tdep.c (make_types): Likewise.
4134 * m68k-tdep.c (m68k_ps_type, m68881_ext_type): Likewise.
4135 * rs6000-tdep.c (rs6000_builtin_type_vec64,
4136 rs6000_builtin_type_vec128): Likewise.
4137 * sparc-tdep.c (sparc_psr_type, sparc_fsr_type): Likewise.
4138 * sparc64-tdep.c (sparc64_pstate_type, sparc64_fsr_type,
4139 sparc64_fprs_type): Likewise.
4140 * spu-tdep.c (spu_builtin_type_vec128): Likewise.
4141 * xtensa-tdep.c (xtensa_register_type): Likewise.
4142 * linux-tdep.c (linux_get_siginfo_type): Likewise.
4143 * target-descriptions.c (tdesc_gdb_type): Likewise.
4144 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
4146 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4148 * i386-tdep.h (struct gdbarch_tdep): Add i386_eflags_type and
4149 i386_mxcsr_type members.
4150 (i386_eflags_type): Make into function.
4151 (i386_mxcsr_type): Likewise.
4152 * i386-tdep.c (i386_eflags_type): Make into function.
4153 (i386_mxcsr_type): Likewise.
4154 (i386_register_type): Update uses.
4155 (i386_init_types): Remove.
4156 (_initialize_i386_tdep): Do not call it.
4157 * amd64-tdep.c (amd64_register_type): Update uses.
4159 * m68k-tdep.h (struct gdbarch_tdep): Add m68k_ps_type member.
4160 * m68k-tdep.c (m68k_ps_type): Make into function.
4161 (m68k_register_type): Update use.
4162 (m68k_init_types): Remove.
4163 (_initialize_m68k_tdep): Do not call it.
4165 * sparc-tdep.h (struct gdbarch_tdep): Add sparc_psr_type,
4166 sparc_fsr_type, sparc64_pstate_type, sparc64_fsr_type, and
4167 sparc64_fprs_type members.
4168 * sparc-tdep.c (sparc_psr_type): Make into function.
4169 (sparc_fsr_type): Likewise.
4170 (sparc32_register_type): Update uses.
4171 (sparc_init_types): Remove.
4172 (_initialize_sparc_tdep): Do not call it.
4173 * sparc64-tdep.c (sparc64_pstate_type): Make into function.
4174 (sparc64_fsr_type): Likewise.
4175 (sparc64_fprs_type): Likewise.
4176 (sparc64_register_type): Update uses.
4177 (sparc64_init_types): Remove.
4178 (_initialize_sparc64_tdep): Likewise.
4180 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4182 * gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,
4183 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
4184 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
4185 (init_float_type, init_complex_type): Add prototypes.
4186 * gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double,
4187 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
4188 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
4189 (_initialize_gdbtypes): Do not initialize them.
4190 (build_flt): Rename to ...
4191 (init_float_type): ... this. Make global.
4192 (build_complex): Rename to ...
4193 (init_complex_type): ... this. Make global. Remove BIT argument.
4194 (gdbtypes_post_init): Update calls.
4196 * ada-lang.c (ada_language_arch_info): Use init_float_type.
4197 * jv-lang.c (build_java_types): Likewise.
4198 * m2-lang.c (build_m2_types): Likewise.
4199 * f-lang.c (build_fortran_types): Use init_float_type and
4202 * target-descriptions.c (tdesc_gdb_type): Call init_float_type instead
4203 of using builtin_type_ieee_single, builtin_type_ieee_double, or
4204 builtin_type_arm_ext.
4206 * ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member.
4207 * ia64-tdep.c (builtin_type_ia64_ext): Remove.
4208 (_initialize_ia64_tdep): Do not initialize it.
4209 (floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext):
4211 (ia64_ext_type): New function.
4212 (ia64_register_reggroup_p, ia64_convert_register_p,
4213 ia64_register_to_value, ia64_value_to_register,
4214 ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type
4215 instead of builtin_type_ia64_ext.
4217 * i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member.
4218 (i387_ext_type): Add prototype.
4219 * i386-tdep.c (i387_ext_type): New function.
4220 (i386_extract_return_value, i386_store_return_value,
4221 i386_register_type): Use it instead of builtin_type_i387_ext.
4222 * amd64-tdep.c (amd64_register_type): Likewise.
4223 * i387-tdep.c (print_i387_value, i387_register_to_value,
4224 i387_value_to_register): Likewise.
4225 (print_i387_value, print_i387_ext): Add GDBARCH argument.
4226 (print_i387_ext, i387_print_float_info): Pass to subroutines.
4228 * m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member.
4229 * m68k-tdep.c (m68881_ext_type): New function.
4230 (m68k_register_type, m68k_convert_register_p): Use it instead
4231 of builtin_type_m68881_ext.
4233 * arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member.
4234 * arm-tdep.c (arm_ext_type): New function.
4235 (arm_register_type): Use it instead of builtin_type_arm_ext.
4237 * alpha-tdep.c (alpha_register_type): Use builtin types
4238 instead of builtin_type_ieee_double.
4240 * mips-tdep.c (mips_float_register_type, mips_double_register_type):
4242 (mips_register_type): Use builtin types instead of
4243 builtin_type_ieee_single and builtin_type_ieee_double.
4244 (mips_print_fp_register): Use builtin types instead of
4245 mips_float_register_type and mips_double_register_type.
4247 * hppa-tdep.c (hppa32_register_type, hppa64_register_type):
4248 Use builtin types instead of builtin_type_ieee_single and
4249 builtin_type_ieee_double.
4251 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4253 * gdbtypes.h (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
4254 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
4255 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
4256 builtin_type_int128, builtin_type_uint128): Remove.
4257 (struct builtin_type): New members builtin_int0, builtin_int8,
4258 builtin_uint8, builtin_int16, builtin_uint16, builtin_int32,
4259 builtin_uint32, builtin_int64, builtin_uint64, builtin_int128,
4260 and builtin_uint128.
4261 * gdbtypes.c (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
4262 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
4263 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
4264 builtin_type_int128, builtin_type_uint128): Remove.
4265 (_initialize_gdbtypes): Do not initialize them.
4266 (gdbtypes_post_init): Initialize fixed-size integer types.
4268 * dwarf2expr.c (unsigned_address_type, signed_address_type): Add
4269 GDBARCH argument. Return platform-specific type.
4270 (dwarf2_read_address, execute_stack_op): Update calls.
4272 * target-descriptions.c (tdesc_gdb_type): Use platform-specific types
4273 instead of global builtin_int_... variables.
4274 * mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
4275 * printcmd.c (do_examine): Likewise.
4276 * jv-exp.y (parse_number): Likewise.
4278 * alpha-tdep.c (alpha_register_type, alpha_push_dummy_call,
4279 alpha_store_return_value): Likewise.
4280 * amd64-linux-tdep.c (amd64_linux_register_type): Likewise.
4281 * amd64-tdep.c (amd64_register_type): Likewise.
4282 * arm-tdep.c (arm_register_type): Likewise.
4283 * avr-tdep.c (avr_register_type): Likewise.
4284 * cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
4285 * frv-tdep.c (frv_register_type): Likewise.
4286 * h8300-tdep.c h8300_register_type): Likewise.
4287 * hppa-tdep.c (hppa64_push_dummy_call, hppa32_register_type,
4288 hppa64_register_type): Likewise.
4289 * i386-tdep.c (i386_mmx_type, i386_sse_type): Likewise.
4290 * iq2000-tdep.c (iq2000_register_type): Likewise.
4291 * lm32-tdep.c (lm32_register_type, lm32_push_dummy_call): Likewise.
4292 * m32r-tdep.c (m32r_register_type): Likewise.
4293 * m68hc11-tdep.c (m68hc11_register_type, m68hc11_pseudo_register_read,
4294 m68hc11_pseudo_register_write): Likewise.
4295 * m68k-tdep.c (m68k_register_type): Likewise.
4296 * m88k-tdep.c (m88k_register_type, m88k_store_arguments): Likewise.
4297 * mep-tdep.c (mep_register_type): Likewise.
4298 * mips-tdep.c (mips_register_type, mips_pseudo_register_type,
4299 mips_print_fp_register): Likewise.
4300 * moxie-tdep.c (moxie_register_type): Likewise.
4301 * mt-tdep.c (mt_copro_register_type, mt_register_type): Likewise.
4302 * rs6000-tdep.c (rs6000_builtin_type_vec64,
4303 rs6000_builtin_type_vec128): Likewise.
4304 * score-tdep.c (score_register_type): Likewise.
4305 * sparc-tdep.c (sparc32_register_type, sparc32_store_arguments):
4307 * sparc64-tdep.c (sparc64_register_type, sparc64_store_arguments):
4309 * spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
4310 * v850-tdep.c (v850_register_type): Likewise.
4311 * xstormy16-tdep.c (xstormy16_register_type): Likewise.
4312 * xtensa-tdep.c (xtensa_register_type): Likewise.
4314 * mt-tdep.c (struct gdbarch_tdep): New data structure.
4315 (mt_gdbarch_init): Alloc TDEP structures.
4316 (mt_register_type): Cache coprocessor type in TDEP instead of
4317 static global variable.
4319 * xtensa-tdep.h (struct gdbarch_tdep): Add type_entries member.
4320 * xtensa-tdep.c (type_entries): Remove.
4321 (xtensa_register_type): Cache fixed-size types in TDEP instead
4322 of in global variable.
4324 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4326 * gdbtypes.h (builtin_type_true_char): Remove.
4327 (builtin_type_true_unsigned_char): Likewise.
4328 (struct builtin_type): Add builtin_true_char and
4329 builtin_true_unsigned_char members.
4330 * gdbtypes.c (builtin_type_true_char): Remove.
4331 (builtin_type_true_unsigned_char): Likewise.
4332 (_initialize_gdbtypes): Do not initialize them.
4333 (gdbtypes_post_init): Initialize builtin_true_char and
4334 builtin_true_unsigned_char members of builtin_type.
4336 * printcmd.c (print_scalar_formatted): Use builtin_type
4337 members instead of builtin_type_true_char and
4338 builtin_type_true_unsigned_char.
4339 * ada-valprint.c (ada_val_print_1): Likewise.
4341 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4343 * gdbtypes.h (builtin_type_void): Remove.
4344 * gdbtypes.c (builtin_type_void): Remove.
4345 (_initialize_gdbtypes): Do not initialize it.
4347 (safe_parse_type): Add GDBARCH argument. Use it to construct
4349 (check_stub_method): Update call.
4351 * infcall.c (call_function_by_hand): Use platform-specific type
4352 instead of builtin_type_void.
4353 * valops.c (value_cast): Use input void type instead of
4356 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4358 * ada-lang.c (assign_component): Use platform-specific integer type
4359 instead of builtin_type_int32 type.
4360 (ada_evaluate_subexp) [OP_ATR_SIZE]: Likewise.
4362 * ax-gdb.c (gen_expr) [UNOP_NEG]: Use platform-specific integer type
4363 instead of builtin_type_int8 type.
4364 * valarith.c (value_x_unop): Likewise.
4365 * python/python-value.c (valpy_absolute): Avoid reference to
4366 builtin_type_int8 type.
4368 * eval.c (evaluate_subexp_standard): Use platform-specific integer
4369 type instead of builtin_type_int8 as EVAL_SKIP return value type.
4370 * ada-lang.c (ada_evaluate_subexp): Likewise.
4371 * jv-lang.c (evaluate_subexp_java): Likewise.
4372 * m2-lang.c (evaluate_subexp_modula2): Likewise.
4373 * scm-lang.c (evaluate_exp): Likewise.
4375 * value.h (value_bitstring): Add INDEX_TYPE argument.
4376 * valops.c (value_bitstring): Add INDEX_TYPE argument, use it instead
4377 of builtin_type_int32 as base range type.
4378 * eval.c (evaluate_subexp_standard): Update value_bitstring call.
4380 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4382 * gdbtypes.c (lookup_array_range_type): Add prototype.
4383 (lookup_string_range_type): Likewise.
4384 * gdbtypes.c (lookup_array_range_type): New function.
4385 (lookup_string_range_type): Likewise.
4387 * ax-gdb.c (gen_repeat): Use lookup_array_range_type.
4388 * parse.c (follow_types): Likewise.
4389 * jv-lang.c (java_array_type): Likewise.
4390 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
4391 * mt-tdep.c (mt_register_type): Likewise.
4392 * sh-tdep.c (sh_sh4_build_float_register_type): Likewise.
4393 * sh64-tdep.c (sh64_build_float_register_type): Likewise.
4394 * value.c (allocate_repeat_value): Likewise.
4395 * valops.c (value_array, value_cstring): Likewise.
4396 * valops.c (value_string): Use lookup_string_range_type.
4398 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4400 * m2-typeprint.c (m2_print_bounds, m2_is_long_set_of_type): Remove
4401 redundant check for NULL TYPE_TARGET_TYPE.
4402 * m2-valprint.c (m2_print_long_set): Likewise.
4403 * p-valprint.c (pascal_type_print_base): Likewise.
4405 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4407 * printcmd.c (next_gdbarch): New static variable.
4408 (set_next_address, do_examine, x_command): Set it.
4409 (decode_format): Use 'a' size to indicate width of an address.
4410 (do_examine): Add GDBARCH argument. Handle 'a' size.
4411 (x_command): Pass architecture to do_examine.
4412 Error if called without argument the first time.
4413 (do_one_display): Pass architecture to do_examine.
4415 (examine_i_type, examine_b_type, examine_h_type, examine_w_type,
4416 examine_g_type): Remove.
4417 (_initialize_printcmd): Do not initialize them.
4418 (do_examine): Use builin_type_int... instead of examine_..._type.
4420 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4422 * gdbtypes.h (struct builtin_type): Add internal_fn member.
4423 * gdbtypes.c (gdbtypes_post_init): Initialize it.
4424 * value.c (internal_fn_type): Remove.
4425 (_initialize_values): Do not initialize it.
4427 * value.c (struct internalvar): Add enum internalvar_kind type and
4428 kind member. Restructure union internalvar_data type. Remove type,
4429 canonical, and make_value members.
4430 (init_if_undefined_command): Update for data structure changes.
4431 (create_internalvar): Likewise.
4432 (create_internalvar_type_lazy): Likewise.
4433 (get_internalvar_integer): Likewise.
4434 (get_internalvar_function): Likewise.
4435 (set_internalvar_component): Likewise.
4436 (set_internalvar): Likewise.
4437 (set_internalvar_integer): Likewise.
4438 (set_internalvar_function): Likewise.
4439 (clear_internalvar): Likewise.
4440 (add_internal_function): Likewise.
4441 (preserve_one_internalvar): New function.
4442 (preserve_values): Call it.
4444 * value.h (value_of_internalvar): Add GDBARCH parameter.
4445 (internalvar_make_value): Likewise.
4446 * value.c (value_of_internalvar): Add GDBARCH parameter. Pass it to
4447 make_value callback. Use it to generate per-architecture result value
4448 types for internal variables with no pre-defined type. Update for data
4450 (show_convenience): Pass architecture to value_of_internalvar.
4451 * eval.c (evaluate_subexp_standard): Likewise.
4452 * infrun.c (siginfo_make_value): Add GDBARCH parameter. Use it
4453 instead of current frame architecture. Return per-architecture type.
4455 * value.h (set_internalvar_string): Add prototype.
4456 * value.c (set_internalvar_string): New function.
4457 * tracepoint.c (set_traceframe_context): Use it.
4459 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4461 * jv-lang.h (java_int_type, java_byte_type, java_short_type,
4462 java_long_type, java_boolean_type, java_char_type, java_float_type,
4463 java_double_type, java_void_type): Remove.
4464 (struct builtin_java_type): New data type.
4465 (builtin_java_type): Add prototype.
4466 (java_primitive_type): Add GDBARCH argument.
4467 (java_primitive_type_from_name): Likewise.
4468 (type_from_class): Likewise.
4470 * jv-lang.c (java_int_type, java_byte_type, java_short_type,
4471 java_long_type, java_boolean_type, java_char_type, java_float_type,
4472 java_double_type, java_void_type): Remove.
4474 (build_java_types, builtin_java_type): New functions.
4475 (java_type_data): New static variable.
4476 (_initialize_java_language): Initialize it. No longer initialize
4478 (java_language_arch_info): Use per-architecture types.
4480 (java_primitive_type): Add GDBARCH argument. Return per-architecture
4481 type instead of refering to global variable.
4482 (java_primitive_type_from_name): Add GDBARCH argument.
4483 (java_primitive_type_name): New function.
4484 (java_demangled_signature_length): Use it instead of
4485 java_primitive_type_from_name.
4486 (java_demangled_signature_copy): Likewise.
4488 (type_from_class): Add GDBARCH argument. Pass to java_link_class_type,
4489 java_primitive_type, and recursive type_from_class call.
4490 (java_link_class_type): Add GDBARCH argument. Pass to type_from_class
4491 calls. Use per-architecture types instead of global types.
4493 * jv-exp.y (parse_java_type): New define.
4494 Use per-architecture types instead of global types througout.
4496 * jv-valprint.c (java_value_print): Pass architecture to
4497 type_from_class and java_primitive_type_from_name. Use per-
4498 architecture types instead of global types.
4500 2009-07-01 Doug Evans <dje@google.com>
4502 * NEWS: Mention biarch amd64-linux gdbserver and hardware watchpoint
4503 support for i386-linux, amd64-linux, and i386-win32 builds of
4506 2009-07-01 Nick Roberts <nickrob@snap.net.nz>
4508 * Makefile.in (HFILES_NO_SRCDIR): Remove entries for deleted files.
4510 2009-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
4512 * Makefile.in (TARGET_FLAGS_TO_PASS): Include also FORCE_PARALLEL.
4513 (check//%): Construct FORCE_PARALLEL for the sub-make. Extend the
4516 2009-06-30 Paul Pluzhnikov <ppluzhnikov@google.com>
4519 * dwarf2-frame.c (dwarf2_frame_state): Move cfa_offset, cfa_reg,
4520 cfa_how and cfa_exp into regs and adjust users.
4522 2009-06-30 Daniel Jacobowitz <dan@codesourcery.com>
4524 * dwarf2read.c (inherit_abstract_dies): Work around GCC PR 40573.
4526 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
4528 * mi/mi-cmd-stack.c (parse_print_values): New.
4529 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Use the above.
4531 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
4533 * varobj.c (varobj_get_type): Use type_to_string.
4535 2009-06-29 Pedro Alves <pedro@codesourcery.com>
4537 * infrun.c (handle_inferior_event): Context switch to the new
4538 thread when resuming for a new_thread_event.
4540 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4542 * ada-lang.h (ada_convert_actual): Add GDBARCH argument.
4543 * ada-lang.c (convert_actual): Remove stale prototype.
4544 (ensure_lval, make_array_descriptor, ada_convert_actual):
4545 Add GDBARCH argument and pass through to subroutine calls.
4546 (ensure_lval): Use GDBARCH instead of current_gdbarch.
4547 * infcall.c (value_arg_coerce): Update ada_convert_actual call.
4549 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4551 * ada-lang.c (resolve): Use per-architecture void type instead
4552 of platform-independent one.
4553 (ada_evaluate_subexp) [STRUCTOP_STRUCT]: Likewise.
4554 (ada_resolve_function): Reimplement fallback logic to avoid
4555 explicit reference to builtin_type_void.
4557 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4559 * ada-valprint.c (ada_print_scalar): Accept NULL type argument
4560 to indicate scalar should be printed as default integer.
4561 (print_optional_low_bound): Pass NULL to ada_print_scalar to
4562 indicate default integer output.
4563 * ada-typeprint.c (print_range, print_range_bound): Likewise.
4564 (print_choices): Likewise. Thus, accept NULL as val_type.
4565 * ada-lang.c (ada_variant_discrim_type): Return NULL when failed
4566 to look up controlling discriminant name.
4568 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4570 * ada-lang.c (to_fixed_range_type): Add ORIG_TYPE argument.
4571 Fall back to orig_type as index type if symbol lookup fails.
4572 Allocate result types from ORIG_TYPE's objfile.
4573 (ada_array_bound_from_type, to_fixed_array_type,
4574 ada_evaluate_subexp): Pass original index type to
4575 to_fixed_range_type. Do not pass objfile.
4577 * ada-typeprint.c (print_range_type_named): Add ORIG_TYPE argument.
4578 Fall back to orig_type as index type if symbol lookup fails.
4579 (print_array_type, ada_print_type): Pass original index type
4580 to print_range_type_named.
4582 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4584 * ada-lang.c (ada_index_type): Update comment.
4586 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4588 * ada-lang.c (ada_index_type): Make static. Add NAME argument.
4589 Throw error on invalid input arguments. Return NULL if unable
4590 to determine index type.
4592 (ada_array_bound_from_type): Remove TYPEP argument.
4593 (ada_array_bound): Make static. Return LONGEST instead of value.
4594 Update for ada_array_bound_from_type change.
4595 (ada_array_length): Return LONGEST instead of value.
4596 Update for ada_array_bound_from_type change.
4597 (make_array_descriptor): Update for ada_array_bound change.
4599 (ada_evaluate_subexp) [OP_ATR_RANGE, OP_ATR_FIRST, OP_ATR_LAST,
4600 OP_ATR_LENGTH]: Update for ada_array_bound_from_type,
4601 ada_array_bound, ada_array_length, ada_index_type changes.
4602 Always use ada_index_type to compute result type; fall back
4603 to architecture-specific integer type if ada_index_type fails.
4605 * ada-lang.h (ada_index_type): Remove prototype.
4606 (ada_array_bound): Likewise.
4608 2009-06-29 Pedro Alves <pedro@codesourcery.com>
4610 * dbxread.c (read_dbx_symtab): Clear has_line_numbers when ending
4613 2009-06-29 Tom Tromey <tromey@redhat.com>
4615 * README: Mention parallel check.
4617 2009-06-29 Sami Wagiaalla <swagiaal@redhat.com>
4619 * dwarf2read.c (read_import_statement): Properly set import location
4621 * cp-support.h (cp_add_using, cp_add_using_directive): Now take char*
4622 inner, char* outer arguments. Updated callers.
4624 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4626 * value.h (value_subscript, value_subscripted_rvalue,
4627 value_bitstring_subscript, value_ptradd): Use LONGEST instead
4628 of value as type of the index argument.
4629 (value_ptrsub): Remove.
4630 * valarith.c (value_subscript, value_subscripted_rvalue,
4631 value_bitstring_subscript, value_ptradd): Use LONGEST instead
4632 of value as type of the index argument.
4633 (value_ptrsub): Remove.
4635 * wrapper.h (gdb_value_subscript): Use LONGEST instead of
4636 value as type of the index argument.
4637 * wrapper.c (gdb_value_subscript): Likewise.
4639 Update calls to gdb_value_subscript, value_subscript,
4640 value_subscripted_rvalue, value_bitstring_subscript and
4641 value_ptradd to use LONGEST instead of value as index
4642 argument type. Use value_ptradd instead of value_ptrsub.
4643 * ada-lang.c (ada_value_subscript, ada_value_ptr_subscript,
4644 ada_tag_name_2): Update.
4645 * ada-tasks.c (read_atcb): Update.
4646 * eval.c (evaluate_subexp_standard): Update.
4647 * valarith.c (value_subscript): Update.
4648 * gnu-v2-abi.c (gnuv2_virtual_fn_field): Update.
4649 * gnu-v3-abi.c (gnuv3_get_virtual_fn, gnuv3_baseclass_offset,
4650 gnuv3_method_ptr_to_value): Update.
4651 * jv-lang.c (evaluate_subexp_java): Update.
4652 * m2-lang.c (evaluate_subexp_modula2): Update.
4653 * python/python-value.c (valpy_getitem, valpy_binop): Update.
4654 * wrapper.c (gdb_value_subscript): Update.
4655 * varobj.c (c_describe_child): Update.
4657 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4659 * gdbtypes.h (make_function_type): Remove OBJFILE parameter.
4660 * gdbtypes.c (make_function_type): Remove OBJFILE parameter.
4661 (lookup_function_type): Update call.
4662 * stabsread.c (read_type): Likewise.
4663 * dwarf2read.c (read_subroutine_type): Use lookup_function_type
4664 instead of make_function_type.
4665 * jv-lang.c (type_from_class): Likewise. Do not allocate types
4666 on the fake "dynamics" obstack.
4668 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4670 * gdbtypes.h (struct builtin_type): Remove builtin_core_addr,
4671 nodebug_text_symbol, nodebug_data_symbol, nodebug_unknown_symbol,
4672 and nodebug_tls_symbol members.
4673 (struct objfile_type): New data structure.
4674 (objfile_type): Add prototype.
4675 * gdbtypes.c (gdbtypes_post_init): Remove initialization code
4676 for types no longer in struct builtin_type.
4677 (objfile_type_data): New static variable.
4678 (_initialize_gdbtypes): Initialize it.
4679 (objfile_type): New function.
4681 * gdbtypes.h (builtin_type_error): Remove.
4682 * gdbtypes.c (build_complex): Do not use builtin_type_error.
4683 * symtab.c (builtin_type_error): Remove.
4684 (_initialize_symtab): Remove initialization.
4686 * stabsread.c (dbx_lookup_type, define_symbol, error_type,
4687 rs6000_builtin_type, read_range_type): Use per-objfile types
4688 instead of global or per-architecture builtin types.
4689 * coffread.c (decode_type): Likewise.
4690 * dwarf2read.c (read_array_type, read_tag_string_type,
4691 new_symbol, die_type): Likewise.
4692 * mdebugread.c (parse_symbol, basic_type, upgrade_type,
4693 parse_procedure, psymtab_to_symtab_1): Likewise.
4694 * xcoffread.c (process_xcoff_symbol): Likewise.
4695 * parse.c (write_exp_msymbol): Likewise.
4697 * stabsread.c (rs6000_builtin_type_data): New static variable.
4698 (_initialize_stabsread): Initialize it.
4699 (rs6000_builtin_type): Add OBJFILE argument. Allocate builtin
4700 types per-objfile instead of globally.
4702 * stabsread.c (dbx_lookup_type): Add OBJFILE argument. Use it
4703 instead of current_objfile; pass it to rs6000_builtin_type.
4704 (dbx_alloc_type, read_type, read_range_type): Update calls.
4705 (cleanup_undefined_types_noname): Add OBJFILE argument and
4706 pass it to dbx_lookup_type.
4707 (cleanup_undefined_types): Add OBJFILE argument and pass it
4708 to cleanup_undefined_types_noname.
4709 * stabsread.h (cleanup_undefined_types): Add OBJFILE argument.
4710 * buildsym.c (end_symtab): Update call.
4712 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4714 * darwin-nat-info.c (darwin_debug_regions_recurse): Use
4715 target_gdbarch instead of current_gdbarch.
4717 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4719 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-windows-tdep.o.
4720 (ALL_TARGET_OBS): Add moxie-tdep.o, i386-darwin-tdep.o, and
4723 * configure.tgt: Add comment.
4725 2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
4727 * mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
4729 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
4730 Jan Kratochvil <jan.kratochvil@redhat.com>
4732 * NEWS: Document inlined function support.
4733 * Makefile.in (SFILES): Add inline-frame.c.
4734 (COMMON_OBS): Add inline-frame.o.
4735 * block.c (contained_in): Rewrite to use lexical nesting.
4736 (block_linkage_function): Skip inlined function blocks.
4737 (block_inlined_p): New.
4738 * block.h (struct block): Update comment.
4739 (block_inlined_p): New prototype.
4740 * blockframe.c (get_frame_block): Handle inlined functions.
4741 (get_frame_function): Do not use block_linkage_function.
4742 (block_innermost_frame): Use get_frame_block and contained_in.
4743 * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
4744 Skip over inlined functions. Simplify epilogue check.
4745 (bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
4747 (set_momentary_breakpoint): Only accept non-inlined frames.
4748 (watch_command_1): Use frame_unwind_caller_pc and
4749 frame_unwind_caller_id instead of get_prev_frame.
4750 (until_break_command): Likewise. Use get_stack_frame_id.
4751 * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
4752 * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
4753 * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
4754 (read_func_scope, new_symbol): Likewise. Handle arguments specially
4755 for inlined functions without call site information.
4756 (inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
4757 (die_specification): Treat DW_AT_abstract_origin as a specification.
4758 (read_type_die): Handle DW_TAG_inlined_subroutine.
4759 * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
4760 * frame.c (fprint_frame_id): Print inline depth.
4761 (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
4762 (skip_inlined_frames, get_stack_frame_id): New.
4763 (frame_unwind_caller_id): Use skip_inlined_frames.
4764 (frame_id_inlined_p): New.
4765 (frame_id_eq): Make the logic match the comments. Add inline_depth
4767 (frame_id_inner): Handle inlined functions.
4768 (frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
4769 (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
4770 (get_prev_frame_1): Check for inline frames. Split out frame
4771 allocation to get_prev_frame_raw.
4772 (get_prev_frame_raw): New function.
4773 (get_prev_frame): Handle inline frames.
4774 (get_frame_pc): Use frame_unwind_pc.
4775 (get_frame_address_in_block): Skip inlined frames on both sides.
4776 (pc_notcurrent): Delete.
4777 (find_frame_sal): Rewrite to handle inline call sites. Use
4778 get_frame_address_in_block.
4779 (deprecated_update_frame_pc_hack): Make static.
4780 * frame.h: Update comments.
4781 (struct frame_id): Add inline_depth.
4782 (enum frame_type): Add INLINE_FRAME.
4783 (frame_id_inlined_p, get_stack_frame_id): New prototypes.
4784 * gdbthread.h (struct thread_info): Add step_stack_frame_id field.
4785 * infcmd.c (set_step_frame): New function.
4786 (step_once): Use set_step_frame. Handle inlined functions.
4787 (until_next_command): Use set_step_frame.
4788 (finish_backward), finish_forward): Use get_stack_frame_id.
4789 (finish_command): Support inlined functions.
4790 * inferior.h (set_step_info): New prototype.
4791 * infrun.c (RESUME_ALL): Use minus_one_ptid.
4792 (clear_proceed_status): Clear step_stack_frame_id.
4793 (init_wait_for_inferior): Call clear_inline_frame_state.
4794 (init_execution_control_state): Make static.
4795 (set_step_info): New function.
4796 (init_thread_stepping_state): Do not set the symtab or line here.
4797 (stepped_in_from): New function.
4798 (handle_inferior_event): Handle inlined functions. Use set_step_info.
4799 (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
4800 (struct inferior_status): Add step_stack_frame_id.
4801 (save_inferior_status, restore_inferior_status): Save and restore
4802 step_stack_frame_id.
4803 * inline-frame.c, inline-frame.h: New files.
4804 * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
4805 * regcache.c (regcache_write_pc): Call reinit_frame_cache.
4806 * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
4807 * stack.c (frame_show_address): New.
4808 (print_frame_info, print_frame): Use it.
4809 (find_frame_funname): Use get_frame_function. Handle inlined blocks.
4810 (frame_info): Mark inlined functions.
4811 (backtrace_command_1): Use get_current_user_frame.
4812 (print_frame_local_vars, print_frame_label_vars): Update comments.
4813 (return_command): Refuse inlined functions.
4814 * symtab.c (lookup_symbol_aux_local): Stop at inlined function
4816 (find_function_start_sal): Avoid inlined functions.
4817 (completion_list_add_fields): New function.
4818 (default_make_symbol_completion_list): Use it. Use block_static_block
4819 and block_global_block. Check for inlined functions.
4820 (skip_prologue_using_sal): Avoid line number comparison across
4822 * symtab.h (struct symbol): Add is_inlined.
4823 (SYMBOL_INLINED): New.
4824 * target.c (target_resume): Call clear_inline_frame_state.
4825 * valops.c (value_of_variable): Check block_inlined_p.
4827 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
4829 * frame.c (frame_unwind_id): Renamed to ...
4830 (frame_unwind_caller_id): ... this. All callers updated.
4831 (frame_pc_unwind): Renamed to ...
4832 (frame_unwind_caller_pc): ... this. All callers updated.
4833 * frame.h: Document frame_unwind_caller_WHAT functions.
4834 (frame_unwind_id): Renamed to ...
4835 (frame_unwind_caller_id): ... this.
4836 (frame_pc_unwind): Renamed to ...
4837 (frame_unwind_caller_pc): ... this.
4838 * hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
4839 * stack.c (parse_frame_specification_1): Do not rely on
4842 2009-06-27 Michael Snyder <msnyder@vmware.com>
4844 * infrun.c (handle_inferior_event): Improve handling of
4845 reverse-stepping into and over shared library functions.
4847 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
4849 * linespec.c (find_method): Add new not_found_ptr parameter to
4850 bring in line with symtab_from_filename, decode_variable.
4851 (decode_compound): Likewise. Also propagate not_found_ptr to
4853 (decode_line_1): Propagate not_found_ptr to decode_compound.
4854 (cplusplus_error): Now throws NOT_FOUND_ERROR.
4856 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
4858 * MAINTAINERS (Write After Approval): Add self.
4860 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4862 * valops.c (value_one): Reimplement broken decimal-float case.
4864 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4866 * eval.c (evaluate_subexp_standard): Use expression architecture
4867 instead of current_gdbarch.
4869 * infrun.c (handle_inferior_event): Avoid unncessary reference
4870 to current_gdbarch and get_current_frame ().
4872 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4874 * breakpoint.h (set_longjmp_breakpoint): Add THREAD argument.
4875 (enum bptype): Add bp_longjmp_master.
4877 * breakpoint.c (create_longjmp_master_breakpoint): New function.
4878 (update_breakpoints_after_exec): Handle bp_longjmp_master
4879 breakpoints. Call create_longjmp_master_breakpoint.
4880 (print_it_typical, bpstat_stop_status, bpstat_what,
4881 print_one_breakpoint_location, allocate_bp_location, mention,
4882 delete_command, breakpoint_re_set_one): Handle bp_longjmp_master.
4883 (breakpoint_re_set): Call create_longjmp_master_breakpoint.
4884 (create_longjmp_breakpoint): Delete.
4885 (set_longjmp_breakpoint): Add THREAD argument. Reimplement
4886 to install momentary clones of bp_longjmp_master breakpoints.
4888 * infcmd.c (step_1): Pass thread to set_longjmp_breakpoint.
4890 2009-06-23 Cary Coutant <ccoutant@google.com>
4892 * dwarf2read.c (dwarf_decode_lines): Ignore rows where is_stmt is 0.
4893 Set basic_block to 0 after a special opcode.
4895 2009-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
4897 Fix a regression by the mmap patch from 2009-06-16.
4898 * symfile.c (reread_symbols): Move sym_finish and clear_objfile_data
4899 calls before deleting the OBJFILE obstack. Extend the comment.
4901 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4903 * jv-lang.h (JAVA_OBJECT_SIZE): Remove.
4904 (get_java_object_header_size): Add GDBARCH parameter.
4905 * jv-lang.c (get_java_object_header_size): Add GDBARCH parameter.
4906 Use it instead of current_gdbarch.
4907 (evaluate_subexp_java): Replace JAVA_OBJECT_SIZE with call to
4908 get_java_object_header_size.
4909 * jv-valprint.c (java_value_print): Likewise.
4911 2009-06-23 Sami Wagiaalla <swagiaal@redhat.com>
4913 * dwarf2read.c (process_die): Handle import statements
4914 (DW_TAG_imported_declaration, case DW_TAG_imported_module)
4915 (read_import_statement): New.
4916 (read_func_scope): Update using_directives to point to current context
4917 (read_lexical_block_scope): Ditto.
4918 * cp-support.h: Added prototype for cp_add_using.
4919 * cp-namespace.c: Removed local context_stack.
4920 (cp_initialize_namespace): Deleted.
4921 (cp_finalize_namespace): Deleted.
4922 (cp_add_using_directive): Use using_directives instead of using_list.
4923 (cp_add_using): No longer static.
4924 * buildsym.h: Created global using_direct variable.
4925 Created using_direct variable in context_stack.
4926 * buildsym.c (finish_block): Set using directives for the block under
4928 (start_symtab): Removed call to cp_initialize_namespace().
4929 (end_symtab): Removed call to cp_finalize_namespace().
4930 (push_context): Save and reset using_directives.
4931 * block.c (block_using): Return using directives for given
4932 block instead of static block.
4934 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4936 * target-descriptions.h (struct type): Do not declare.
4937 (struct tdesc_type): Declare.
4938 (tdesc_named_type): Change return type to struct tdesc_type *.
4939 (tdesc_record_type): Remove.
4940 (tdesc_create_vector): Add prototype.
4941 (tdesc_create_union): Likewise.
4942 (tdesc_add_field): Likewise.
4944 * target-descriptions.c (struct tdesc_reg): Replace gdb_type
4945 member by tdesc_type member.
4946 (struct tdesc_type_field, tdesc_type_field): Add type and vector def.
4947 (struct tdesc_type, tdesc_type_p): Likewise.
4948 (struct tdesc_arch_reg, tdesc_arch_reg): Likewise.
4949 (struct tdesc_feature): Change type of "types" to VEC(tdesc_type_p).
4950 (struct tdesc_arch_data): Replace registers member by arch_regs.
4952 (tdesc_predefined_types): Change to array of pre-defined
4953 struct tdesc_type structures. Add "code_ptr" and "data_ptr".
4954 (tdesc_named_type): Return struct tdesc_type * instead of GDB type.
4955 (tdesc_gdb_type): New function.
4957 (target_find_description): Update for data structure changes.
4958 (tdesc_data_cleanup): Likewise.
4959 (tdesc_numbered_register): Likewise.
4960 (tdesc_use_registers): Likewise.
4961 (tdesc_create_reg): Likewise.
4963 (tdesc_find_arch_register): New function.
4964 (tdesc_find_register): Use it.
4965 (tdesc_register_type): Use tdesc_gdb_type to generate GDB type from
4966 tdesc_type on demand; cache generated types in tdesc_arch_reg.
4968 (tdesc_free_type): New function.
4969 (tdesc_free_feature): Call it.
4971 (tdesc_create_vector): New function.
4972 (tdesc_create_union): Likewise.
4973 (tdesc_add_field): Likewise.
4974 (tdesc_record_type): Remove.
4976 (tdesc_type_id): Remove.
4977 (maint_print_c_tdesc_cmd): Update for data structure changes. Update
4978 generated code to create tdesc_type structures instead of GDB types.
4980 * xml-tdesc.c: Do not include "gdbtypes.h".
4981 (struct tdesc_parsing_data): Change type of current_union to
4982 struct tdesc_type *.
4983 (tdesc_start_reg): Do not special-case "code_ptr" or "data_ptr".
4984 (tdesc_start_union): Call tdesc_create_union.
4985 (tdesc_start_field): Call tdesc_add_field.
4986 (tdesc_start_vector): Call tdesc_create_vector.
4987 (tdesc_end_union): Remove.
4988 (feature_children): Remove reference to tdesc_end_union.
4990 * features/arm-with-iwmmxt.c: Regenerate.
4991 * features/mips-linux.c: Regenerate.
4992 * features/mips64-linux.c: Regenerate.
4993 * features/rs6000/powerpc-32.c: Regenerate.
4994 * features/rs6000/powerpc-32l.c: Regenerate.
4995 * features/rs6000/powerpc-403.c: Regenerate.
4996 * features/rs6000/powerpc-403gc.c: Regenerate.
4997 * features/rs6000/powerpc-505.c: Regenerate.
4998 * features/rs6000/powerpc-601.c: Regenerate.
4999 * features/rs6000/powerpc-602.c: Regenerate.
5000 * features/rs6000/powerpc-603.c: Regenerate.
5001 * features/rs6000/powerpc-604.c: Regenerate.
5002 * features/rs6000/powerpc-64.c: Regenerate.
5003 * features/rs6000/powerpc-64l.c: Regenerate.
5004 * features/rs6000/powerpc-7400.c: Regenerate.
5005 * features/rs6000/powerpc-750.c: Regenerate.
5006 * features/rs6000/powerpc-860.c: Regenerate.
5007 * features/rs6000/powerpc-altivec32.c: Regenerate.
5008 * features/rs6000/powerpc-altivec32l.c: Regenerate.
5009 * features/rs6000/powerpc-altivec64.c: Regenerate.
5010 * features/rs6000/powerpc-altivec64l.c: Regenerate.
5011 * features/rs6000/powerpc-e500.c: Regenerate.
5012 * features/rs6000/powerpc-e500l.c: Regenerate.
5013 * features/rs6000/powerpc-isa205-32l.c: Regenerate.
5014 * features/rs6000/powerpc-isa205-64l.c: Regenerate.
5015 * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
5016 * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
5017 * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
5018 * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
5019 * features/rs6000/powerpc-vsx32.c: Regenerate.
5020 * features/rs6000/powerpc-vsx32l.c: Regenerate.
5021 * features/rs6000/powerpc-vsx64.c: Regenerate.
5022 * features/rs6000/powerpc-vsx64l.c: Regenerate.
5023 * features/rs6000/rs6000.c: Regenerate.
5025 2009-06-23 Joel Brobecker <brobecker@adacore.com>
5027 * ada-lang.c (decode_packed_array): If the value is a pointer to
5028 an array, then use value_ind to dereference it, not ada_value_ind.
5029 (ada_template_to_fixed_record_type_1): Handle the case where a
5030 dynamic field is an aligner type.
5031 (to_fixed_array_type): Add handling for packed array types.
5032 (ada_get_base_type): Do not follow the XVS type if the type is
5034 (ada_evaluate_subexp): Split a few statements up for clarity
5036 <OP_FUNCALL>: Add handling of the case of a packed array that
5037 has already been fixed.
5039 2009-06-23 Joel Brobecker <brobecker@adacore.com>
5041 * ada-lang.c (evaluate_subexp): Delete. Use the version from eval.c.
5042 (evaluate_subexp_type): Reimplement using evaluate_subexp.
5043 * value.h (evaluate_subexp): Add declaration.
5044 * eval.c (evaluate_subexp): Make non-static.
5045 * objc-lang.c (print_object_command): Use evaluate_subexp.
5047 2009-06-23 Paul Pluzhnikov <ppluzhnikov@google.com>
5049 Revert 2009-05-14 breakpoint commit (no longer needed).
5050 * breakpoint.h (breakpoint_re_set_objfile): Remove
5051 * breakpoint.c (breakpoint_re_set_objfile): Likewise
5052 (create_overlay_event_breakpoint): Remove objfile parameter,
5053 iterate over all objfiles.
5054 * objfiles.c (objfile_relocate): Update.
5055 * symfile.c (new_symfile_objfile): Likewise.
5057 2009-06-23 Tom Tromey <tromey@redhat.com>
5060 * c-lang.c (classify_type): Iterate over typedefs.
5061 * c-valprint.c (textual_element_type): Iterate over typedefs.
5063 2009-06-22 Tristan Gingold <gingold@adacore.com>
5065 * darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
5068 2009-06-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5071 * buildsym.c (block_compar): New function.
5072 (end_symtab): Replace the bubble sort by a qsort based code.
5074 2009-06-22 Sami Wagiaalla <swagiaal@redhat.com>
5076 * MAINTAINERS (Write After Approval): Add self.
5078 2009-06-22 Ulrich Weigand <uweigand@de.ibm.com>
5080 * spu-tdep.c (spu_get_longjmp_target): New function.
5081 (spu_gdbarch_init): Install it.
5083 2009-06-22 H.J. Lu <hongjiu.lu@intel.com>
5086 * remote.c (getpkt_or_notif_sane_1): Initialize val to -1.
5088 2009-06-21 Michael Snyder <msnyder@vmware.com>
5090 * inferior.h: Update ancient comment.
5092 2009-06-20 Aleksandar Ristovski <aristovski@qnx.com>
5093 Pedro Alves <pedro@codesourcery.com>
5095 * solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
5097 (scan_dyntag): Skip if input bfd isn't elf flavoured.
5098 (locate_base): Call elf_locate_base even without an exec_bfd.
5100 2009-06-19 Samuel Bronson <naesten@gmail.com>
5103 * cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
5104 for prefix commands to avoid duplicates in the output.
5106 2009-06-19 Samuel Bronson <naesten@gmail.com>
5109 * cli/cli-decode.c (apropos_cmd): Fix avoidance of double
5112 2009-06-19 Jerome Guitton <guitton@adacore.com>
5114 * breakpoint.c (expand_line_sal_maybe): When explicit_line,
5115 skip prologue on each sals.
5116 (skip_prologue_sal): Return explicit_line and explicit_pc
5119 2009-06-19 Tristan Gingold <gingold@adacore.com>
5121 * darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
5124 2009-06-19 Tristan Gingold <gingold@adacore.com>
5125 * machoread.c (macho_symtab_read): Adjust for bfd changes.
5126 * darwin-nat.h (struct darwin_exception_msg): New type to describe
5128 (struct private_thread_info): New type to describe the state of the
5130 (DEF_VEC_I thread_t): Removed, replaced by ...
5131 (DEF_VEC_O darwin_thread_t): ... this new type.
5132 (struct darwin_inferior): Renamed to ...
5133 (struct private_inferior): ... this type. Fields added.
5134 (darwin_not_port): Moved into the private inferior structure.
5135 * darwin-nat.c: Add includes, improve comments.
5136 Rewrite to handle multiple threads and processes.
5137 (darwin_resume_to): New function and protype.
5138 (darwin_resume, darwin_wait_to, darwin_wait): Ditto.
5139 (darwin_kill_inferior): Add ops argument.
5140 (darwin_pid_to_str): New function.
5141 (darwin_thread_alive): Ditto.
5142 (darwin_inf, darwin_not_port): Removed.
5143 (darwin_inf_fake_stop): New variable.
5144 (msgin, msgout, msg_state, exc_msg): Removed.
5145 (mach_check_error): Use warning instead of error.
5146 (darwin_ptrace): Adjust debug level.
5147 (cmp_thread_t): Fix names (typo).
5148 (darwin_check_new_threads): Argument is now an inferior,
5149 adjust for new structures, add no change check, ignore dead ports,
5150 handle first thread case.
5151 (find_inferior_task_it): New function.
5152 (find_inferior_notify_it): Ditto.
5153 (darwin_find_inferior_by_task): Ditto.
5154 (darwin_find_inferior_by_notify): Ditto.
5155 (darwin_find_thread): Ditto.
5156 (darwin_suspend_inferior): Ditto.
5157 (darwin_resume_inferior): Ditto.
5158 (catch_exception_raise_state): Removed.
5159 (catch_exception_raise_state_identity): Removed.
5160 (darwin_suspend_inferior_it): New function.
5161 (darwin_resume_inferior_it): Ditto.
5162 (darwin_dump_message): New function, extracted from darwin_wait.
5163 (darwin_decode_exception_message): New function.
5164 (darwin_encode_reply): New function.
5165 (catch_exception_raise): Removed.
5166 (darwin_send_reply): New function, extracted from darwin_resume.
5167 (darwin_resume_thread): New function, extracted from darwin_resume.
5168 (struct resume_inferior_threads_param): New type.
5169 (darwin_resume_inferior_threads_it): New function.
5170 (darwin_resume_inferior_threads): New function.
5171 (darwin_suspend_inferior_threads): New function.
5172 (darwin_resume): Mostly rewritten to handle multiple threads and
5174 (darwin_decode_message): New function extracted from darwin_wait.
5175 (cancel_breakpoint): New function.
5176 (darwin_wait): Mostly rewritten. Handle multiple threads.
5177 (darwin_mourn_inferior): Adjust for per process structures.
5178 (darwin_reply_to_all_pending_messages): New function.
5179 (darwin_stop_inferior): Adjust for per inferior structures.
5180 (darwin_attach_pid): Ditto.
5181 (darwin_init_thread_list): Ditto.
5182 (darwin_attach): Ditto.
5183 (darwin_detach): Ditto.
5184 (darwin_files_info): Now empty.
5185 (darwin_pid_to_str): Adjust returns string to match one expected by
5187 (darwin_read_write_inferior): Rename err variable to match other uses.
5188 Adjust debug message. Handle submaps.
5189 (darwin_xfer_memory): Adjust for per inferior structures.
5190 (set_enable_mach_exceptions): Ditto.
5191 (darwin_pid_to_exec_file): New function.
5192 (darwin_get_ada_task_ptid): Ditto.
5193 (darwin_supports_multi_process): Ditto.
5194 (_initialize_darwin_inferior): Remove useless assertion, adjust for
5195 per inferior structures. Add new target operations.
5197 2009-06-18 Hui Zhu <teawater@gmail.com>
5198 Michael Snyder <msnyder@vmware.com>
5200 * infrun.c (handle_inferior_event): Improve reverse stepping
5201 through function epilogue.
5203 * infrun.c (handle_inferior_event): Reverse-next through
5206 2009-06-18 Paul Pluzhnikov <ppluzhnikov@google.com>
5208 * dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
5211 2009-06-17 Tom Tromey <tromey@redhat.com>
5213 * dwarf2read.c (zlib_decompress_section): Use a cleanup.
5215 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5217 * gdbarch.sh (pointer_to_address): Change to type 'm'.
5218 (address_to_pointer): Likewise.
5219 * gdbarch.c, gdbarch.h: Regenerate.
5221 * inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
5222 (signed_pointer_to_address): Likewise.
5223 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
5224 * findvar.c (unsigned_pointer_to_address): Likewise.
5225 (signed_pointer_to_address): Likewise.
5226 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
5228 * avr-tdep.c (avr_address_to_pointer): Likewise.
5229 (avr_pointer_to_address): Likewise.
5230 * iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
5231 (iq2000_address_to_pointer): Likewise.
5232 * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
5233 (m32c_m16c_pointer_to_address): Likewise.
5234 * spu-tdep.c (spu_pointer_to_address): Likewise.
5235 * xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
5236 (xstormy16_address_to_pointer): Likewise.
5238 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5240 * printcmd.c (print_scalar_formatted): Always truncate
5241 unsigned data types.
5243 * cli-dump.c (struct callback_data): Change type of load_offset
5245 (restore_binary_file): Update type casts.
5246 (restore_command): Parse load_offset as address, not long.
5248 * utils.c (string_to_core_addr): Do not sign-extend value.
5249 * varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
5250 before comparing against requested frame address.
5252 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5254 * gdbarch.sh (gcore_bfd_target): New gdbarch callback.
5255 * gdbarch.h, gdbarch.c: Regenerate.
5257 * gcore.c (default_gcore_target): Make return value const.
5258 Call gdbarch_gcore_bfd_target if present.
5259 (default_gcore_arch, default_gcore_mach): Use target_gdbarch.
5261 * corelow.c (core_read_description): Call gdbarch_core_read_description
5262 on core_gdbarch instead of current_gdbarch.
5264 * ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.
5266 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5268 * gdbtypes.c (create_string_type): Receive character type as argument.
5269 * gdbtypes.h (create_string_type): Add character type argument.
5270 * dwarf2read.c (read_tag_string_type): Pass character type to
5273 * value.h (value_string): Add character type argument.
5274 * valops.c (value_string): Add character type argument. Pass it to
5275 create_string_type. Do not allocate space in inferior.
5276 * valarith.c (value_concat): Pass character type to value_string.
5278 * value.h (value_typed_string): Rename to ...
5279 (value_cstring): ... this.
5280 * valops.c (value_typed_string): Rename to ...
5281 (value_cstring): ... this.
5282 * c-lang.c (evaluate_subexp_c): Update.
5284 * python/python-value.c (builtin_type_pychar): New define.
5285 (convert_value_from_python): Call value_cstring instead
5286 of value_from_string.
5287 * value.c (value_from_string): Remove.
5288 * value.h (value_from_string): Remove.
5290 * eval.c (evaluate_subexp_standard): Pass character type to
5291 value_string. Pass expression architecture to value_nsstring
5292 and lookup_child_selector.
5293 * objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
5294 (lookup_child_selector): Likewise.
5295 (value_nsstring): Likewise.
5296 * objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
5297 Pass character type to value_string..
5298 (lookup_child_selector): Likewise.
5299 (value_nsstring): Add GDBARCH parameter, use it instead of
5300 objfile architecture. Pass architecture to lookup_objc_class
5301 and lookup_child_selector. Pass character type to value_string.
5302 (end_msglist): Pass architecture to lookup_objc_class.
5303 * objc-exp.y: Pass architecture to lookup_objc_class.
5305 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5307 * gdbtypes.h (struct language_defn): Add forward declaration.
5308 (lookup_typename): Add LANGUAGE and GDBARCH parameters.
5309 (lookup_unsigned_typename): Likewise.
5310 (lookup_signed_typename): Likewise.
5311 * gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
5312 Use them instead of current_language and current_gdbarch.
5313 (lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
5314 Pass them to lookup_typename.
5315 (lookup_signed_typename): Likewise.
5317 * c-exp.y: Pass parse_language and parse_gdbarch to
5318 lookup_unsigned_typename and lookup_signed_typename.
5319 * objc-exp.y: Likewise.
5320 * m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.
5322 * c-lang.c (evaluate_subexp_c): Pass expression language and
5323 gdbarch to lookup_typename.
5324 * printcmd.c (printf_command): Pass current language and
5325 gdbarch to lookup_typename.
5326 * python/python-type.c (typy_lookup_typename): Likewise.
5327 Include "language.h".
5329 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5331 * sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
5332 Use it instead of current_gdbarch. Pass architecture to
5333 sparc32_gregset_supplies_p.
5334 (sparc64_fpregset_supplies_p): Add GDBARCH parameter. Use it instead
5335 of current_gdbarch. Pass architecture to sparc32_fpregset_supplies_p.
5336 * sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
5337 sparc64nbsd_fpregset_supplies_p): Likewise.
5338 * sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
5339 Add GDBARCH parameter.
5340 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
5341 (sparc_fetch_inferior_registers): Pass regcache architecture to
5342 sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
5343 (sparc_store_inferior_registers): Likewise.
5344 * sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
5345 Add GDBARCH parameter.
5346 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
5348 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5350 * ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
5352 * aix-thread.c (pd_enable): Likewise.
5353 * amd64-linux-nat.c (ps_get_thread_area): Likewise.
5354 * bsd-uthread.c (bsd_uthread_activate): Likewise.
5355 * linux-nat.c (linux_nat_info_proc_cmd): Likewise.
5356 * linux-thread-db.c (enable_thread_event): Likewise.
5357 * monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
5358 * nto-procfs.c (procfs_open): Likewise.
5359 * procfs.c (invalidate_cache, procfs_insert_watchpoint,
5360 info_proc_mappings, info_mappings_callback): Likewise.
5361 * record.c (record_open): Likewise.
5362 * rs6000-nat.c (ARCH64): Likewise.
5363 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
5364 (darwin_bfd_open): Likewise.
5365 * memattr.c (mem_info_command): Likewise.
5367 * windows-nat.c (win32_resume): Use current regcache architecture
5368 instead of current_gdbarch.
5370 * dbug-rom.c (dbug_regname): Remove check against number of
5371 registers in current_gdbarch.
5372 * solib-pa64.c (read_dynamic_info): Remove unused variable.
5374 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5376 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
5377 use it instead of current_gdbarch.
5378 * frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
5379 * arm-tdep.c (arm_skip_prologue): Pass architecture to
5380 deprecated_pc_in_call_dummy.
5382 * symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
5383 Use it instead of current_gdbarch.
5384 * symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
5385 * breakpoint.c (expand_line_sal_maybe): Pass architecture to
5386 skip_prologue_using_sal.
5387 * arm-tdep.c (skip_prologue_using_sal): Likewise.
5388 * lm32-tdep.c (lm32_skip_prologue): Likewise.
5389 * m32-tdep.c (m32c_skip_prologue): Likewise.
5390 * mips-tdep.c (mips_skip_prologue): Likewise.
5391 * moxie-tdep.c (moxie_skip_prologue): Likewise.
5392 * mt-tdep.c (mt_frame_unwind_cache): Likewise.
5393 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
5394 * frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
5395 it to skip_prologue_using_sal. Update call sites ...
5396 (frv_skip_prologue, frv_frame_unwind_cache): ... here.
5398 * mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
5399 (check_for_saved): Use it instead of current_gdbarch.
5400 (mn10300_analyze_prologue): Set it.
5402 * value.c (using_struct_return): Add GDBARCH parameter. Use it
5403 instead of current_gdbarch.
5404 * value.h (using_struct_return): Add GDBARCH parameter.
5405 * eval.c (evaluate_subexp_standard): Pass architecture to
5406 using_struct_return.
5407 * infcall.c (call_function_by_hand): Likewise.
5408 * stack.c (return_command): Likewise.
5409 * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
5411 * symtab.c (in_prologue): Add GDBARCH parameter. Use it instead of
5413 * symtab.h (in_prologue): Add GDBARCH parameter.
5414 * infrun.c (handle_inferior_event): Pass architecture to in_prologue.
5416 * eval.c (evaluate_subexp_standard): Use expression architecture
5417 instead of current_gdbarch.
5419 * c-lang.c (evaluate_subexp_c): Use expression architecture and
5420 language instead of current_gdbarch and current_language.
5422 * printcmd.c (do_one_display): Use expression architecture instead
5425 * infcmd.c (print_return_value): Use architecture of stop_regcache
5426 instead of current_gdbarch.
5427 (print_vector_info, print_float_info): Remove GDBARCH argument,
5428 use frame architecture instead.
5429 (vector_info, float_info): Update calls.
5431 * objc-lang.c (objc_skip_trampoline): Use frame architecture
5432 instead of current_gdbarch.
5434 * parse.c (write_dollar_variable): Use parse architecture instead
5437 * source.c (line_info): Use objfile architecture instead of
5440 * symtab.c (find_function_start_sal): Use gdbarch instead of
5442 (print_msymbol_info): Use objfile architecture instead of
5445 * valops.c (value_assign): Use frame architecture instead of
5448 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5450 * buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.
5452 * coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
5453 calling record_line.
5454 (enter_linenos): Likewise.
5455 * dbxread.c (process_one_symbol): Likewise.
5456 * dwarf2read.c (dwarf_decode_lines): Likewise.
5457 * mdebugread.c (psymtab_to_symtab_1): Likewise.
5458 * xcoffread.c (enter_line_range): Likewise.
5460 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5462 * ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
5463 architecture instead of current_gdbarch.
5464 (gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
5465 (gen_expr): Pass expression to get_struct_ref.
5467 * symtab.h (struct symbol_ops): Add GDBARCH parameter to
5468 tracepoint_var_ref callback.
5469 * ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
5470 symbol operation callback.
5471 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
5472 Use it instead of current_gdbarch.
5473 (locexpr_tracepoint_var_ref): Add GDBARCH parameter. Pass it to
5474 dwarf2_tracepoint_var_ref.
5475 (loclist_tracepoint_var_ref): Likewise.
5477 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5479 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
5480 Use it instead of address bits of current_gdbarch.
5481 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
5482 * arm-tdep.c (thumb_analyze_prologue): Pass address bits to
5484 (arm_scan_prologue): Likewise.
5485 * m32c-tdep.c (m32c_analyze_prologue): Likewise.
5486 * mep-tdep.c (mep_analyze_prologue): Likewise.
5487 * mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
5488 * s390-tdep.c (s390_analyze_prologue): Likewise.
5490 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5492 * mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
5493 frame architecture instead of current_gdbarch.
5494 (mi_cmd_data_list_changed_registers): Likewise.
5495 (mi_cmd_data_list_register_values): Likewise. Pass selected
5496 frame to get_register.
5497 (get_register): Add FRAME argument, use it as frame to retrieve
5498 registers from (instead of selected frame). Use frame architecture
5499 instead of current_gdbarch.
5500 (mi_cmd_data_write_register_values): Use current regcache
5501 architecture instead of current_gdbarch.
5503 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5505 * tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
5506 use frame architecture instead. Replace current_gdbarch uses.
5507 (tui_show_registers): Update call.
5508 (tui_get_register): Remove GDBARCH parameter; use frame architecture
5510 (tui_show_register_group): Update call.
5511 (tui_check_register_values): Likewise.
5512 (tui_register_format): Remove GDBARCH parameter; use frame
5513 architecture instead. Replace current_gdbarch uses.
5514 (tui_get_register): Update call.
5516 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5518 * gdbarch.sh (construct_inferior_arguments): Remove.
5519 * gdbarch.c, gdbarch.h: Regenerate.
5520 * infcmd.c (get_inferior_args): Call construct_inferior_arguments
5521 directly instead of gdbarch_construct_inferior_arguments.
5522 (construct_inferior_arguments): Remove GDBARCH argument.
5523 * inferior.h (construct_inferior_arguments): Likewise.
5525 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5527 * symfile.c (section_is_mapped): Use objfile architecture instead
5529 (TARGET_LONG_BYTES): Remove.
5530 (read_target_long_array): Add SIZE argument. Use it instead of
5532 (simple_read_overlay_table): Retrieve long size from objfile
5533 architecture; pass it to read_target_long_array.
5534 (simple_read_overlay_region_table): Likewise.
5535 (simple_overlay_update_1): Likewise.
5537 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5539 * infrun.c (cleanup_displaced_step_closure): Remove.
5540 (displaced_step_clear_cleanup): Move to before displaced_step_prepare.
5541 (displaced_step_prepare): Use displaced_step_clear_cleanup instead
5542 of cleanup_displaced_step_closure.
5543 (handle_inferior_event, keep_going): Use thread architecture instead
5546 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5548 * infrun.c (handle_inferior_event): Use current frame architecture
5549 or thread architecture instead of current_gdbarch. Pass to
5550 handle_step_into_function and handle_step_into_function_backward.
5551 (handle_step_into_function): Add GDBARCH parameter. Use it instead
5553 (handle_step_into_function_backward): Likewise.
5554 (insert_step_resume_breakpoint_at_frame): Use frame architecture
5555 instead of current_gdbarch.
5556 (insert_step_resume_breakpoint_at_caller): Likewise.
5558 2009-06-17 Pierre Muller <muller@ics.u-strasbg.fr>
5559 Pedro Alves <pedro@codesourcery.com>
5561 * infcmd.c (post_create_inferior): Call breakpoint_re_set after target
5562 is pushed for watchpoint promotion to hardware watchpoint.
5564 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
5566 * dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
5567 (dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
5568 (dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
5569 (dwarf_ranges_section, dwarf_frame_section)
5570 (dwarf_eh_frame_section): Removed.
5571 (dwarf2_resize_section): Likewise.
5572 (dwarf2_read_section): Now static, use bfd_mmap() if possible.
5573 (dwarf2_get_section_info): New function.
5574 (munmap_section_buffer): Likewise.
5575 (dwarf2_per_objfile_cleanup): Likewise.
5576 (section_is_p): Signature change.
5577 * dwarf2-frame.c (dwarf2_build_frame_info): Use
5578 dwarf2_get_section_info instead of dwarf2_read_section.
5580 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
5582 * solib.c (symbol_add_stub): New FLAGS parameter.
5583 (solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
5585 (solib_add): Defer breakpoint_re_set until after all solibs.
5586 * bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
5587 * rs6000-nat.c (objfile_symbol_add): Adjust.
5588 * symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
5589 (new_symfile_objfile): Likewise.
5590 (symbol_file_add_with_addrs_or_offsets): Likewise.
5591 (symbol_file_add_from_bfd): Likewise.
5592 (symbol_file_add): Likewise.
5593 * symfile.h (enum symfile_add_flags): New. Adjust prototypes.
5594 * symfile-mem.c (symbol_file_add_from_memory): Adjust.
5595 * windows-nat.c (safe_symbol_file_add_stub): Adjust.
5596 * machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
5598 2009-06-16 Keith Seitz <keiths@redhat.com>
5600 * linespec.c (collect_methods): Delete.
5601 (add_matching_methods): Reove destructor special case.
5602 (find_method): Call find_methods directly instead of
5604 * valops.c (value_struct_elt): Remove destructor
5606 (check_field): Likewise.
5607 (value_struct_elt_for_reference): Likewise.
5608 (destructor_name_p): Remove misleading comment about dtors
5609 being "special cases".
5610 * gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
5611 * gdbtypes.c (get_destructor_fn_field): Likewise.
5613 2009-06-16 Pedro Alves <pedro@codesourcery.com>
5615 * mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
5616 TARGET_OJECT_MEMORY reads to the topmost target, not to the
5617 flattened current_target.
5619 2009-06-16 Tristan Gingold <gingold@adacore.com>
5621 * avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
5623 (avr_register_name): Add const to register_names.
5624 (avr_scan_arg_moves): Move inside avr_scan_prologue.
5625 (avr_scan_prologue): Add pc_end argument.
5626 Only read prologue bytes that can be read.
5627 Limit the scan to the known prologue length.
5628 Makes pattern variables static and const.
5630 (avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
5632 (avr_breakpoint_from_pc): Constify avr_break_insn.
5633 (avr_extract_return_value): Fix function comment.
5634 (avr_frame_unwind_cache): Fix GNU style violations.
5635 Pass current_pc argument to avr_scan_prologue to stop prologue
5636 analysis to the current pc. This fixes the bug with the 'next'
5638 Correctly set the SP register of the previous frame (use call_length).
5639 (avr_frame_prev_register): Fix indentation.
5640 Correctly read PC from the stack on avr6 architectures.
5641 (avr_push_dummy_call): Fix indentation.
5642 (avr_gdbarch_init): Set call_length according to the architecture.
5644 2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
5646 * infcall.c (show_unwind_on_terminating_exception_p): New
5648 (call_function_by_hand): Create breakpoint and clean-up call for
5649 std::terminate.breakpoint. Add unwind_on_terminating_exception_p
5650 gate. Pop frame on breakpoint hit.
5651 (_initialize_infcall): Add add_setshow_boolean_cmd for
5652 unwind-on-terminating-exception.
5654 2009-06-12 Kevin Buettner <kevinb@redhat.com>
5656 * dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
5657 `has_section_at_zero' flag from stripped objfile to separate,
5658 debug info only, objfile.
5660 2009-06-12 Pedro Alves <pedro@codesourcery.com>
5662 * exec.h (section_table_xfer_memory_partial): Improve description,
5663 mention SECTION_NAME.
5664 * exec.c (section_table_xfer_memory_partial): Remove stale
5667 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5669 * nto-tdep.h (nto_generic_supply_gpregset)
5670 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
5671 * nto-tdep.c (nto_generic_supply_gpregset)
5672 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
5674 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5676 * i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
5677 (i386nto_sigcontext_addr): Change the way context address is calculated.
5678 (i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
5679 sc_sp_offset and set sc_reg_offset and sc_num_regs.
5681 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5683 * i386-nto-tdep.c (i386_nto_target): Remove definition.
5684 (init_i386nto_ops): Use macros to set fields to global
5685 current_nto_target directly.
5686 (i386nto_init_abi): Remove unused nto_set_target call.
5687 * nto-tdep.h (nto_set_target): Remove unused declaration.
5688 * nto-tdep.c (nto_set_target): Remove unused function.
5690 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5692 * breakpoint.c (break_command_really): Rename local variable
5693 breakpoint_chain to bkpt_chain.
5695 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5697 Add support for XMM registers.
5698 * i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
5699 (i386nto_register_area): Correctly calculate offsets and sizes for
5700 all supported registers.
5702 2009-06-11 Tom Tromey <tromey@redhat.com>
5704 * eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
5705 'static' from local variable definitions.
5707 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5709 * symtab.c (append_expanded_sal): Remove unused local variables.
5711 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5713 * infrun.c (sched_multi): New global.
5714 (resume): If sched_multi is set, resume only threads of the
5716 (prepare_to_proceed): Don't switch over to wait_ptid if we're
5717 resuming a different inferior, and sched_multi is off.
5718 (show_schedule_multiple): New.
5719 (_initialize_infrun): Register new "set schedule-multiple" command.
5720 * inferior.h (sched_multi): Declare.
5721 * NEWS: Mention new "schedule-multiple" setting.
5723 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5725 * varobj.c (varobj_create): Properly restore the selected frame.
5727 2009-06-05 Tom Tromey <tromey@redhat.com>
5729 * inferior.c (print_inferior): Make a table, not a list. Emit
5732 2009-06-10 Jonas Maebe <jonas.maebe@elis.ugent.be>
5734 * darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
5735 darwin_wait (blocking wait).
5736 (darwin_kill_inferior): Likewise.
5738 2009-06-10 Pedro Alves <pedro@codesourcery.com>
5740 * infrun.c (handle_inferior_event): Update comment around trying
5741 to revert back to a stepping thread that has exited.
5743 2009-06-10 Cary Coutant <ccoutant@google.com>
5745 * dwarf2read.c (dwarf_decode_lines): Recognize and ignore
5746 DW_LNE_set_discriminator.
5748 2009-06-10 Pierre Muller <muller@ics.u-strasbg.fr>
5750 * breakpoint.c: ARI fixes.
5751 (create_overlay_event_breakpoint): Avoid assignment inside if statement.
5752 (print_one_breakpoint_location): Likewise.
5753 (create_longjmp_breakpoint): Likewise.
5754 (tracepoint_save_command): Likewise
5755 (bpstat_find_step_resume_breakpoint): No operator at end of line.
5756 (bpstat_stop_status): Likewise.
5757 (describe_other_breakpoints): Likewise.
5758 (hw_watchpoint_used_count): Likewise.
5759 (expand_line_sal_maybe): Likewise.
5760 (break_command_really): Likewise.
5761 (delete_command): Likewise.
5762 (do_enable_breakpoint): Likewise.
5763 (delete_trace_command): Likewise.
5764 (catch_exception_command_1): Likewise and remove extra parentheses.
5766 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
5768 * breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
5769 "ubreak" command that does not exist.
5771 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
5773 * cli/cli-decode.c (add_alias_cmd): Correct assertion.
5775 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5777 * hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
5779 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5782 * proc-utils.h (procfs_first_available): Don't declare here.
5783 * sol-thread.c: Include procfs.h instead of sys/procfs.h and
5785 * procfs.c: Include procfs.h.
5786 (procfs_target): Make it public. Don't register
5787 procfs_can_use_hw_breakpoint here.
5788 (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
5789 defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
5790 (procfs_can_use_hw_breakpoint): Remove check of
5791 TARGET_HAS_HARDWARE_WATCHPOINTS.
5792 (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
5794 (_initialize_procfs): Don't add the procfs target here.
5796 * i386-sol2-nat.c: Include target.h and procfs.h.
5797 (_initialize_amd64_sol2_nat): Install the procfs target here,
5798 customized with watchpoints support.
5799 * irix5-nat.c: Include target.h.
5800 (_initialize_core_irix5): Rename to ...
5801 (_initialize_irix5_nat): ... this. Install the procfs target
5802 here, customized with watchpoints support.
5803 * alpha-nat.c: Include procfs.h.
5804 (_initialize_core_alpha): Rename to...
5805 (_initialize_alpha_nat): ... this. Install the procfs target
5806 here, customized with watchpoints support.
5807 * sparc-sol2-nat.c: Include target.h and procfs.h.
5808 (_initialize_sparc_sol2_nat): New.
5810 * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
5811 * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
5812 * config/mips/irix5.mh (NAT_FILE): Delete.
5813 * config/mips/irix6.mh (NAT_FILE): Delete.
5814 * config/mips/nm-irix5.h: Delete.
5816 20009-06-07 Pedro Alves <pedro@codesourcery.com>
5818 * auxv.c (procfs_xfer_auxv): Change type of the `object' argument
5819 to enum target_object. Cleanup comments.
5820 * auxv.h: Include "target.h". Cleanup comments to not mention
5821 NATIVE_XFER_AUXV anymore.
5823 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5825 * inferior.h (procfs_first_available): Move declaration to...
5826 * proc-utils.h: ... here.
5827 * sol-thread.c: Include procfs.h and proc-utils.h.
5829 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5831 * inferior.h (proc_iterate_over_mappings): Delete declaration.
5832 * nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
5833 * procfs.c (proc_iterate_over_mappings): Delete.
5835 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5837 * target.h (struct target_ops): Make to_has_all_memory,
5838 to_has_memory, to_has_stack, to_has_registers and to_has_execution
5839 methods instead of variables.
5840 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
5841 (target_has_registers_1, target_has_execution_1): Declare
5843 (target_has_all_memory): Rewrite to call target_has_all_memory_1.
5844 (target_has_memory): Rewrite to call target_has_memory_1.
5845 (target_has_stack): Rewrite to call target_has_all_stack_1.
5846 (target_has_registers): Rewrite to call target_has_registers_1.
5847 (target_has_execution): Rewrite to call target_has_execution_1.
5848 (default_child_has_all_memory, default_child_has_memory)
5849 (default_child_has_stack, default_child_has_registers)
5850 (default_child_has_execution): Declare.
5851 (target_mark_running, target_mark_exited): Delete declarations.
5852 * target.c (default_child_has_all_memory,
5853 default_child_has_memory, default_child_has_stack,
5854 default_child_has_registers, default_child_has_execution): New.
5855 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
5856 target_has_registers_1, target_has_execution_1): New.
5857 (add_target): Default the to_has_all_memory, to_has_all_memory,
5858 to_has_memory, to_has_stack, to_has_registers and to_has_execution
5859 callbacks to return 0.
5860 (update_current_target): Do not inherit to_has_all_memory,
5861 to_has_memory, to_has_stack, to_has_registers or to_has_execution.
5862 (target_mark_running, target_mark_exited): Delete.
5863 (memory_xfer_partial): Adjust.
5864 (target_read_memory, target_write_memory, target_search_memory):
5865 Dispatch to the the top-most target, not the flattened
5867 (target_info): Adjust.
5868 (init_dummy_target): Install return_zero as callback for
5869 to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
5871 (set_maintenance_target_async_permitted): Use have_live_inferiors
5872 instead of target_has_execution.
5873 * target-memory.c (target_write_memory_blocks): Dispatch memory
5874 writes to the the top-most target, not the flattened
5877 * breakpoint.c (insert_breakpoints): Don't check for
5878 target_has_execution here.
5879 (update_global_location_list): Check if there are live inferiors
5880 to debug instead of target_has_execution.
5881 * infcmd.c (kill_command, detach_command): Check if there are
5882 inferiors instead of target_has_execution.
5883 * inferior.h (have_live_inferiors): Declare.
5884 * inferior.c (have_live_inferiors): New.
5885 * infrun.c (normal_stop): Don't check for target_has_execution to
5886 finish the thread states.
5887 * thread.c (is_thread_state, is_stopped, is_exited, is_running)
5888 (any_running, is_executing): Remove checks for
5889 target_has_execution.
5890 * top.c (kill_or_detach): Don't try to kill core inferiors.
5891 (quit_target): Don't check for target_has_execution.
5893 * corelow.c (core_has_memory, core_has_stack, core_has_registers):
5895 (init_core_ops): Install core_has_memory, core_has_stack and
5897 * exec.c (exec_has_memory): New.
5898 (init_exec_ops): Install exec_has_memory.
5899 * remote.c (remote_add_inferior): Don't call target_mark_running.
5900 (remote_start_remote): Don't call target_mark_exited or call
5901 target_mark_running.
5902 (remote_open_1): Use have_inferiors instead of
5903 target_has_execution. Don't use target_mark_exited.
5904 (init_remote_ops): Install deafult_child_has_all_memory,
5905 default_child_has_memory, default_child_has_stack,
5906 default_child_has_registers, default_child_has_execution.
5907 * bsd-kvm.c (bsd_kvm_return_one): New.
5908 (bsd_kvm_add_target): Register bsd_kvm_return_one as
5909 to_has_memory, to_has_stack and to_has_registers callbacks.
5910 * remote-m32r-sdi.c (m32r_return_one): New.
5911 (init_m32r_ops): Register it.
5912 * inf-child.c (inf_child_target): Adjust to register
5913 default_child_has_all_memory, default_child_has_memory,
5914 default_child_has_stack, default_child_has_registers,
5915 default_child_has_execution callbacks.
5916 * gnu-nat.c (init_gnu_ops): Likewise.
5917 * go32-nat.c (init_go32_ops): Likewise.
5918 * hpux-thread.c (init_hpux_thread_ops): Likewise.
5919 * monitor.c (init_base_monitor_ops): Likewise.
5920 * nto-procfs.c (init_procfs_ops): Likewise.
5921 * remote-mips.c (_initialize_remote_mips): Likewise.
5922 * windows-nat.c (init_windows_ops): Likewise.
5923 * remote-sim.c (gdbsim_create_inferior): Don't use
5924 target_mark_running or target_mark_exited.
5925 (gdbsim_mourn_inferior): Don't call target_mark_exited.
5926 (init_gdbsim_ops): Adjust to register
5927 default_child_has_all_memory, default_child_has_memory,
5928 default_child_has_stack, default_child_has_registers,
5929 default_child_has_execution callbacks.
5931 * linux-nat.c (linux_nat_xfer_partial): If reading memory, and
5932 there's no inferior selected, defer to a lower stratum.
5934 2009-06-05 Tom Tromey <tromey@redhat.com>
5936 * varobj.c (update_dynamic_varobj_children): Wrap error text in
5938 (install_visualizer): Likewise.
5939 (varobj_set_visualizer): Likewise.
5941 2009-06-05 Marc Khouzam <marc.khouzam@ericsson.com>
5943 * mi/mi-main.c (mi_cmd_exec_continue)
5944 (mi_cmd_exec_interrupt): Adjust parsing of thread group
5945 ids to current reality, where they don't have any 'p' prefix.
5947 2009-06-05 Aleksandar Ristovski <aristovski@qnx.com>
5949 * corelow.c (core_open): Check for core_gdbarch before calling
5950 gdbarch_target_signal_from_host.
5952 2009-06-05 Tom Tromey <tromey@redhat.com>
5954 * c-exp.y (parse_number): Don't use K&R definition.
5956 (yyerror): Likewise.
5958 2009-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
5960 * varobj.c (varobj_update): Fix out of scope varobjs to not to change.
5962 2009-06-04 Ulrich Weigand <uweigand@de.ibm.com>
5964 * symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
5965 * ax-gdb.c (gen_var_ref): Likewise.
5966 * findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
5967 * printcmd.c (address_info): Likewise.
5968 * dwarf2loc.c (dwarf_expr_frame_base): Likewise.
5969 * dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
5970 * symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
5971 * dwarf2loc.h: Likewise.
5972 * dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.
5974 * symtab.h: (struct symbol_register_ops): New struct definition.
5975 (struct symbol): Make "ops" member a union of symbol_computed_ops and
5976 symbol_register_ops callback pointers.
5977 (SYMBOL_REGISTER_OPS): New macro.
5978 * tracepoint.c: Include "objfiles.h".
5979 (scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
5980 callback to retrieve register numbers.
5981 * ax-gdb.c (gen_var_ref): Likewise.
5982 * findvar.c (read_var_value): Likewise.
5983 * printcmd.c (address_info): Likewise.
5985 * coffread.c (coff_reg_to_regnum): New function.
5986 (coff_register_funcs): New static variable.
5987 (process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
5988 Install SYMBOL_REGISTER_OPS callbacks.
5989 * mdebugread.c (mdebug_reg_to_regnum): New function.
5990 (mdebug_register_funcs): New static variable.
5991 (parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
5992 Install SYMBOL_REGISTER_OPS callbacks.
5993 * stabsread.c (stab_reg_to_regnum): New function.
5994 (stab_register_funcs): New static variable.
5995 (define_symbol): Do not call gdbarch_stab_reg_to_regnum.
5996 Install SYMBOL_REGISTER_OPS callbacks.
5998 2009-06-03 Doug Evans <dje@google.com>
6000 * symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
6001 after discarding its contents.
6003 2009-06-03 Pedro Alves <pedro@codesourcery.com>
6005 * target.c: Include "exec.h".
6006 (update_current_target): Don't inherit to_sections or
6008 (target_get_section_table): New.
6009 (target_section_by_addr): Fetch the section table from the passed
6011 (memory_xfer_partial): Handle unmapped overlay sections before
6012 anything else. Get the overlay mapped address here. Adjust to
6013 use section_table_xfer_memory_partial.
6014 (get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
6015 instead of TARGET_OBJECT_MEMORY.
6016 (target_resize_to_sections): Delete.
6017 (remove_target_sections): Adjust to remove target sections from
6018 `current_target_sections', and use resize_section_table.
6019 * target.h (struct target_ops) <to_sections, to_sections_end>:
6021 <to_get_section_table>: New method.
6022 (xfer_memory, print_section_info): Delete declarations.
6023 (struct target_section_table): New type.
6024 (target_get_section_table): Declare.
6025 (target_resize_to_sections): Delete declaration.
6026 (remove_target_sections): Delete declaration.
6027 * bfd-target.c (target_bfd_xfer_partial): Get the section table
6029 (target_bfd_get_section_table): New.
6030 (target_bfd_xclose): Adjust.
6031 (target_bfd_reopen): Store the section table in the to_data field.
6032 * corelow.c (core_data): New.
6033 (core_close): Adjust to release core_data and its sections.
6034 (core_open): Allocate core_data, and build its target sections
6036 (deprecated_core_resize_section_table): New.
6037 (core_files_info): Pass core_data to print_section_info.
6038 (core_xfer_partial): Adjust to use
6039 section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
6040 (init_core_ops): Do not install a deprecated_xfer_memory callback
6042 * solib.c (update_solib_list): Add the shared library sections
6043 to the current target sections table.
6044 * exec.c (current_target_sections_1): New global.
6045 (current_target_sections): New global.
6046 (exec_close_1): New function, refactored from exec_close. Remove
6047 the exec_bfd's sections from the current target sections table.
6048 Adjust to not use to_sections.
6049 (exec_close): Remove all target sections. Call exec_close_1.
6050 (exec_file_clear): Use exec_close_1 instead of unpushing the
6052 (exec_file_attach): Likewise. Adjust to not use to_sections. Add
6053 exec_bfd's sections to the current target sections table. Don't
6054 push the exec_ops target here.
6055 (resize_section_table): New.
6056 (add_target_sections): New.
6057 (remove_target_sections): Moved here.
6058 (section_table_xfer_memory): Adjust to implement the xfer_partial
6059 interface, and rename to...
6060 (section_table_xfer_memory_partial): ... this, replacing the
6061 current function of that same name.
6062 (exec_get_section_table): New.
6063 (exec_xfer_partial): New.
6064 (xfer_memory): Delete.
6065 (print_section_info): Replace the target_ops parameter by a
6066 target_section_table parameter.
6067 (exec_files_info, set_section_command, exec_set_section_address):
6068 Adjust to use the current sections table.
6069 (init_exec_ops): Do not register a deprecated_xfer_memory
6070 callback. Register to_xfer_partial and to_get_section_table
6072 * infrun.c (handle_inferior_event): Update comments around
6074 * rs6000-nat.c (xcoff_relocate_core): Adjust to use
6075 deprecated_core_resize_section_table.
6076 * exec.h (resize_section_table): Declare.
6077 (section_table_xfer_memory_partial): Add const char * argument.
6078 (remove_target_sections): Declare here.
6079 (add_target_sections): Declare.
6080 (print_section_info): Declare here.
6081 * gdbcore.h (deprecated_core_resize_section_table): Declare.
6083 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6085 * value.h (struct internalvar): Remove.
6086 (get_internalvar_integer): Add prototype.
6087 (set_internalvar_integer): Add prototype.
6088 (clear_internalvar): Add prototype.
6090 * value.c (struct internalvar): Move here. Add type member. Remove
6091 endian member. Add union_internalvar member instead of value member.
6092 (init_if_undefined_command): Use intvar->type.
6093 (create_internalvar): Do not initialize value/endian, but type.
6094 (create_internalvar_type_lazy): Call create_internalvar.
6095 (value_of_internalvar): Handle host-side internalvar contents.
6096 (set_internalvar_component): Likewise.
6097 (set_internalvar): Likewise.
6098 (get_internalvar_integer): New function.
6099 (clear_internalvar): Likewise.
6100 (set_internalvar_integer): Likewise.
6101 (preserve_values): Handle host-side internalvar contents.
6103 * breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
6104 set_internalvar_integer instead of set_internalvar.
6105 * findcmd.c (find_command): Likewise.
6106 * infrun.c (handle_inferior_event): Likewise.
6107 * source.c (forward_search_command, reverse_search_command): Likewise.
6108 * tracepoint.c (set_traceframe_num, set_tracepoint_num,
6109 set_traceframe_context): Likewise.
6111 * printcmd.c (x_command): Call clear_internalvar instead of
6113 * tracepoint.c (set_traceframe_context): Likewise.
6115 * breakpoint.c (get_number_trailer): Call get_internalvar_integer
6116 instead of value_of_internalvar.
6117 * linespec.c (decode_dollar): Likewise.
6119 * expprint.c (dump_subexp_body_standard): Use internalvar_name
6120 instead of accessing internalvar private elements.
6121 * valops.c (value_assign): Copy from original source instead of
6122 accessing internalvar private elements.
6124 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6126 * scm-lang.c (builtin_type_scm): Remove.
6127 (scm_lookup_name): Add GDBARCH parameter. Use it instead of
6128 objfile architecture. Use per-architecture builtin_scm_type instead
6129 of builtin_type_scm.
6130 (evaluate_exp): Pass expression architecture to scm_lookup_name.
6132 (scm_get_field): Add SIZE parameter. Use it instead of
6133 TYPE_LENGTH (builtin_type_scm).
6135 (build_scm_types): New function.
6136 (scm_type_data): New variable.
6137 (builtin_scm_type): New function.
6138 (_initialize_scheme_language): Do not initialize builtin_type_scm.
6139 Register build_scm_types as post-init function for scm_type_data.
6141 * scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
6142 instead of builtin_type_scm.
6144 * scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
6145 (scm_get_field): Add SIZE paramter.
6146 (scm_scmval_print): Remove prototype.
6147 (builtin_type_scm): Remove.
6148 (struct builtin_scm_type): Add structure definition.
6149 (builtin_scm_type): Add prototype.
6151 * scm-valprint.c (scm_inferior_print): Add TYPE parameter. Use it
6152 instead of builtin_core_addr type; do not use objfile architecture.
6153 (scm_scmlist_print): Add TYPE parameter. Use it to define SCM_SIZE.
6154 Pass type to scm_scmval_print.
6155 (scm_ipruk): Add TYPE parameter. Use it to define SCM_SIZE.
6156 (scm_scmval_print): Make static. Add TYPE parameter. Use it to
6157 define SCM_SIZE. Pass type to scm_ipruk and scm_scmlist_print.
6158 (scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.
6160 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6162 * mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
6163 mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
6164 mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
6165 mdebug_type_unsigned_char, mdebug_type_unsigned_short,
6166 mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
6167 mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
6168 mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
6169 mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
6170 mdebug_type_complex, mdebug_type_double_complex,
6171 mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
6174 (basic_type_data): New global variable.
6175 (basic_type): New function.
6176 (parse_type): Remove static basic type map map_bt. Call basic_type
6177 to get basic types instead of using mdebug_type_ variables.
6179 (parse_symbol): Use builtin types instead of mdebug_type_ variables.
6180 (upgrade_type): Likewise.
6181 (parse_procedure): Likewise.
6182 (psymtab_to_symtab_1): Likewise.
6184 (_initialize_mdebugread): Do not initialize mdebug_type_ variables.
6185 Initialize basic_type_data.
6187 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6189 * dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
6190 * dfp.c (promote_decimal): Remove.
6191 (decimal_binop): Convert LEN_RESULT to input parameter.
6192 Remove call to decimal_binop.
6193 (decimal_compare): Remove call to decimal_binop.
6195 * valarith.c (value_binop): Pass desired result type length
6198 2009-06-01 Tristan Gingold <gingold@adacore.com>
6200 * configure.tgt (avr): Set gdb_sim to use the simulator.
6202 2009-05-29 Doug Evans <dje@google.com>
6204 * infrun.c (prepare_to_proceed): Document. Assert !non_stop.
6205 If scheduler-locking is enabled, we're not going to be singlestepping
6206 any other previously stopped thread.
6208 2009-05-29 Pedro Alves <pedro@codesourcery.com>
6210 * mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.
6212 2009-05-29 Eli Zaretskii <eliz@gnu.org>
6214 * i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
6215 for stabs and COFF debug info.
6217 2009-05-28 Pedro Alves <pedro@codesourcery.com>
6219 * infrun.c (handle_inferior_event): When thread hoping, switch
6220 inferior_ptid to the event thread before removing breakpoints from
6221 the target. If not stopping, also try to revert back to a thread
6222 that was doing a "next". Check if that thread still exists before
6224 (currently_stepping_thread): Delete and merge with ...
6225 (currently_stepping): ... this.
6226 (currently_stepping_callback): Rename to ...
6227 (currently_stepping_or_nexting_callback): ... this, and also
6228 return true if the thread was stepping over a call (has a
6229 step-resume breakpoint).
6231 2009-05-28 Tom Tromey <tromey@redhat.com>
6233 * python/python.c (gdbpy_parameter): Rename. Fix error message.
6234 (GdbMethods): Change "get_parameter" to "parameter".
6236 2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
6237 Paul Pluzhnikov <ppluzhnikov@google.com>
6239 * configure.ac (!have_libpython): Add python-prettyprint source
6241 * configure: Regenerate.
6242 * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
6245 2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
6246 Tom Tromey <tromey@redhat.com>
6247 Thiago Jung Bauermann <bauerman@br.ibm.com>
6249 * mi/mi-main.c (mi_cmd_list_features): List "python" feature.
6250 * varobj.h (varobj_set_visualizer): Declare.
6251 (varobj_get_display_hint): Likewise.
6252 (varobj_update_result_t) <children_changed, value_installed>: New
6254 * mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
6255 * mi/mi-cmds.h (mi_cmd_var_set_visualizer,
6256 mi_cmd_var_set_child_range): Declare.
6257 * mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
6258 (mi_cmd_var_list_children): Emit display hint.
6259 (varobj_update_one): Emit display hint. Handle dynamic children.
6260 * python/python.c (GdbMethods): Add "default_visualizer".
6261 * python/python-internal.h (apply_varobj_pretty_printer,
6262 gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
6264 (gdbpy_default_visualizer): Likewise.
6265 * varobj.c: Include python.h, python-internal.h.
6266 (PyObject): New typedef.
6267 (struct varobj) <children_requested, pretty_printer>: New fields.
6268 (varobj_create): Call install_default_visualizer.
6269 (instantiate_pretty_printer): New function.
6270 (varobj_set_display_format): Update.
6271 (varobj_get_display_hint): New function.
6272 (update_dynamic_varobj_children): New function.
6273 (varobj_get_num_children): Handle dynamic children.
6274 (varobj_list_children): Likewise.
6275 (install_new_value): Likewise.
6276 (varobj_add_child): New function.
6277 (install_visualizer): Likewise.
6278 (install_default_visualizer): Likewise.
6279 (varobj_set_visualizer): Likewise.
6280 (varobj_update): Handle dynamic children.
6281 (create_child): Use create_child_with_value.
6282 (create_child_with_value): New function.
6283 (value_get_print_value): Call pretty printer. Add value_formatter
6285 (c_value_of_variable): Update.
6286 (varobj_invalidate): Always free all_rootvarobj.
6287 * python/python-prettyprint.c (apply_varobj_pretty_printer): New
6289 (gdbpy_get_varobj_pretty_printer): Likewise.
6290 (gdbpy_default_visualizer): Likewise.
6292 2009-05-27 Tom Tromey <tromey@redhat.com>
6293 Thiago Jung Bauermann <bauerman@br.ibm.com>
6294 Phil Muldoon <pmuldoon@redhat.com>
6295 Paul Pluzhnikov <ppluzhnikov@google.com>
6296 Vladimir Prus <vladimir@codesourcery.com>
6298 * python/python-value.c (value_object_to_value): New function.
6299 * python/python-internal.h: Include frameobject.h.
6300 (gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
6302 (value_object_to_value): Declare.
6303 * printcmd.c (struct format_data) <raw>: New field.
6304 (last_format): Default to 0.
6305 (decode_format): Initialize val.raw. Handle /r flag.
6306 (print_command_1): Initialize fmt.raw and opts.raw.
6307 (output_command): Likewise.
6308 (x_command): Fix initialization of fmt.format. Initialize
6310 (display_command): Initialize fmt.raw.
6311 (do_one_display): Set opts.raw.
6312 * python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
6313 gdbpy_display_hint_cst): New globals.
6314 (_initialize_python): Initialize them. Set gdb.pretty_printers.
6315 * cp-valprint.c: Include python.h.
6316 (cp_print_value): Call apply_val_pretty_printer.
6317 * python/python.h (apply_val_pretty_printer): Declare.
6318 * stack.c (print_this_frame_argument_p): Remove.
6319 (print_frame_args): Compute summary flag. Don't use
6320 print_this_frame_argument_p.
6321 * valprint.c: Include python.h.
6322 (user_print_options): Initialize new fields.
6323 (scalar_type_p): New function.
6324 (val_print): Handle 'raw' and 'summary' modes. Call
6325 apply_val_pretty_printer.
6326 (value_print): Handle 'raw' mode.
6327 * valprint.h (struct value_print_options) <raw, summary>: New
6329 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
6330 (SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
6331 (python-prettyprint.o): New target.
6332 * python/python-prettyprint.c: New file.
6334 2009-05-27 Tom Tromey <tromey@redhat.com>
6335 Paul Pluzhnikov <ppluzhnikov@google.com>
6337 * mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
6339 * cli/cli-dump.c (dump_value_to_file): Use value_address.
6340 * valprint.c (common_val_print): Likewise.
6341 * v850-tdep.c (v850_push_dummy_call): Use value_address.
6342 * tracepoint.c (encode_actions): Use value_address.
6343 * printcmd.c (print_formatted): Use value_address.
6344 (x_command): Likewise.
6345 * p-valprint.c (pascal_object_print_static_field): Use
6347 * mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
6348 * mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
6349 * m32r-tdep.c (m32r_push_dummy_call): Use value_address.
6350 * jv-valprint.c (java_value_print): Use value_address.
6351 * infcall.c (find_function_addr): Use value_address.
6352 * gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
6353 * gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
6354 * frv-tdep.c (frv_push_dummy_call): Use value_address.
6355 * frame.c (frame_register_unwind): Use value_address.
6356 (frame_unwind_register_value): Likewise.
6357 * darwin-nat-info.c (info_mach_region_command): Use
6359 * cp-valprint.c (cp_print_static_field): Use value_address.
6360 * c-valprint.c (c_value_print): Use value_address.
6361 * breakpoint.c (update_watchpoint): Use value_address.
6362 (can_use_hardware_watchpoint): Likewise.
6363 * ada-valprint.c (ada_val_print_1): Use value_address.
6364 (ada_value_print): Likewise.
6365 * ada-tasks.c (read_fat_string_value): Use value_address.
6366 * jv-lang.c (java_link_class_type): Use set_value_address.
6367 (java_link_class_type): Likewise.
6368 (get_java_utf8_name): Use value_address.
6369 (type_from_class): Likewise.
6370 (java_link_class_type): Likewise.
6371 * findvar.c (value_of_register): Use set_value_address.
6372 (read_var_value): Likewise.
6373 (read_var_value): Likewise.
6374 * eval.c (evaluate_subexp_standard): Use set_value_address.
6375 (evaluate_subexp_standard): Use value_address.
6376 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
6377 * ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
6378 (ada_value_primitive_packed_val): Likewise.
6379 (ensure_lval): Likewise.
6380 (thin_data_pntr): Use value_address.
6381 (desc_bounds): Likewise.
6382 (ada_value_primitive_packed_val): Likewise.
6383 (value_assign_to_component): Likewise.
6384 (ensure_lval): Likewise.
6385 (make_array_descriptor): Likewise.
6386 (ada_to_fixed_value): Likewise.
6387 (unwrap_value): Likewise.
6388 * value.c (deprecated_value_address_hack): Remove.
6389 (value_address): New function.
6390 (value_raw_address): Likewise.
6391 (set_value_address): Likewise.
6392 (value_fn_field): Use set_value_address.
6393 (value_from_contents_and_address): Likewise.
6394 (value_fn_field): Likewise.
6395 (allocate_value_lazy): Don't use VALUE_ADDRESS.
6396 (value_as_address): Use value_address.
6397 (value_static_field): Likewise.
6398 * valops.c (search_struct_field): Use set_value_address.
6399 (value_at): Likewise.
6400 (value_at_lazy): Likewise.
6401 (value_repeat): Likewise.
6402 (value_cast_structs): Use value_address.
6403 (value_cast): Likewise.
6404 (value_fetch_lazy): Likewise.
6405 (value_assign): Likewise.
6406 (value_repeat): Likewise.
6407 (address_of_variable): Likewise.
6408 (value_coerce_array): Likewise.
6409 (value_coerce_function): Likewise.
6410 (value_addr): Likewise.
6411 (search_struct_field): Likewise.
6412 (search_struct_method): Likewise.
6413 (find_method_list): Likewise.
6414 (value_struct_elt_for_reference): Likewise.
6415 (value_full_object): Likewise.
6416 * jv-valprint.c (java_value_print): Use set_value_address.
6417 * value.h (deprecated_value_address_hack): Remove.
6418 (VALUE_ADDRESS): Remove.
6419 (value_address): Declare.
6420 (value_raw_address): Declare.
6421 (set_value_address): Declare.
6423 2009-05-27 Tom Tromey <tromey@redhat.com>
6424 Thiago Jung Bauermann <bauerman@br.ibm.com>
6425 Phil Muldoon <pmuldoon@redhat.com>
6426 Paul Pluzhnikov <ppluzhnikov@google.com>
6428 * python/python.c (_initialize_python): Call
6429 gdbpy_initialize_types.
6430 (GdbMethods): Add "lookup_type".
6431 * python/python-value.c (value_object) <type>: New field.
6432 (valpy_dealloc): Decref type.
6433 (valpy_new): Initialize type.
6434 (valpy_get_type): New function.
6435 (value_to_value_object): Initialize type.
6436 (valpy_cast): New function.
6437 (value_object_getset): Add "type".
6438 (value_object_methods): Add "cast".
6439 * python/python-internal.h (type_to_type_object): Declare.
6440 (type_object_to_type): Likewise.
6441 (gdbpy_initialize_types): Likewise.
6442 (gdbpy_lookup_type): Declare.
6443 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
6444 (SUBDIR_PYTHON_SRCS): Add python-type.c.
6445 (python-type.o): New target.
6446 * python/python-type.c: New file.
6448 2009-05-27 Tom Tromey <tromey@redhat.com>
6449 Thiago Jung Bauermann <bauerman@br.ibm.com>
6450 Phil Muldoon <pmuldoon@redhat.com>
6452 * python/python.c: Include objfiles.h, observer.h.
6453 (gdbpy_auto_load): New global.
6454 (gdbpy_current_objfile): Likewise.
6455 (GDBPY_AUTO_FILENAME): New define.
6456 (gdbpy_new_objfile): New function.
6457 (gdbpy_get_current_objfile): Likewise.
6458 (gdbpy_objfiles): Likewise.
6459 (_initialize_python): Add "maint set auto-load". Call
6460 gdbpy_initialize_objfile. Attach objfile observer.
6461 (GdbMethods): New methods current_objfile, objfiles.
6462 * python/python-objfile.c: New file.
6463 * python/python-internal.h (objfile_to_objfile_object): Declare.
6464 (objfpy_get_printers): Likewise.
6465 (gdbpy_initialize_objfile): Likewise.
6466 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
6467 (SUBDIR_PYTHON_SRCS): Add python-objfile.c.
6468 (python-objfile.o): New target.
6470 2009-05-27 Pedro Alves <pedro@codesourcery.com>
6472 * infrun.c (follow_exec): Clear the stop_requested flag.
6473 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
6476 2009-05-27 Aleksandar Ristovski <aristovski@qnx.com>
6478 * nto-procfs.c (get_regset): Pass correct pointer.
6480 2009-05-26 Doug Evans <dje@google.com>
6482 * dwarf2read.c (follow_die_ref): Add comment.
6483 (dwarf2_mark_helper): Tweak comment.
6484 (dwarf2_mark): Move description to its proper place.
6486 2009-05-25 Pierre Muller <muller@ics.u-strasbg.fr>
6488 * procfs.c (procfs_wait): Add options parameter.
6490 2009-05-24 Doug Evans <dje@google.com>
6492 Global renaming of find_thread_pid to find_thread_ptid.
6493 * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
6494 * thread.c (find_thread_ptid): Renamed from find_thread_pid.
6495 All callers updated.
6497 * infrun.c (follow_fork): Initialize new step_* locals
6498 to avoid "may be used uninitialized" warnings.
6500 2009-05-24 Pedro Alves <pedro@codesourcery.com>
6502 * inflow.c (copy_terminal_info): Deep copy `run_terminal'.
6504 2009-05-24 Pedro Alves <pedro@codesourcery.com>
6506 * gdbthread.h (struct thread_info): New `pending_follow' field.
6507 * thread.c (new_thread): New function.
6508 (add_thread_silent): Use it.
6509 * breakpoint.c (internal_breakpoint_number): New global, moved
6511 (create_internal_breakpoint): ... this.
6512 (clone_momentary_breakpoint): New.
6513 * breakpoint.h (clone_momentary_breakpoint): Declare.
6514 * infrun.c (nullify_last_target_wait_ptid): Move declaration
6516 (pending_follow): Delete.
6517 (follow_fork): Handle pending follow fork event here. Moved the
6518 preserving of thread stepping state here.
6519 (resume): Don't handle pending follow fork events here. Only
6520 install the inferior's terminal modes if we're about to resume it.
6521 (proceed): Handle possible pending follow fork events here.
6522 (init_wait_for_inferior): No need to clear pending_follow anymore,
6524 (handle_inferior_event): Adjust to per-thread `pending_follow'.
6525 Call `follow_fork' to handle following the fork. If the
6526 follow-fork is cancelled, stop stepping.
6527 * linux-nat.c (linux_child_follow_fork): Adjust to per-thread
6528 `pending_follow' events. Remove code that handled preserving the
6529 thread stepping state.
6530 * inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
6531 * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
6533 2009-05-24 Pierre Muller <muller@ics.u-strasbg.fr>
6535 * symfile.c (add_shared_symbol_files_command): Remove
6536 prototype and function.
6537 (_initialize _symfile): Move "add-shared-symbol-files"
6538 command and "assf" alias.
6539 * windows-nat.c (_initialize_windows_nat): to here.
6540 Change "add-shared-symbol-files" to alias.
6542 * config/i386/cygwin.mh: Remove NAT_FILE.
6543 * config/i386/mingw.mh: Remove NAT_FILE.
6544 * config/i386/mingw64.mh: Remove NAT_FILE.
6545 * config/i386/nm-cygwin.h: Remove file.
6546 * config/i386/nm-cygwin64.h: Remove file.
6548 2009-05-24 Hui Zhu <teawater@gmail.com>
6550 * i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
6551 I386_LINUX_RECORD_IOCTL_*,
6552 I386_LINUX_RECORD_FCNTL_*) Removed.
6553 (i386_linux_init_abi): Change size of record from macros to
6556 2009-05-24 Hui Zhu <teawater@gmail.com>
6558 * i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
6559 * linux-record.c (record_linux_system_call): Ditto.
6560 * linux-record.h (linux_record_tdep): Ditto.
6562 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
6564 Replace the savestring calls by xstrdup calls where possible.
6565 * breakpoint.c (condition_command, set_raw_breakpoint)
6566 (create_catchpoint, update_breakpoint_locations): Replace the
6567 savestring calls by xstrdup calls where possible.
6568 * buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
6569 (record_producer): Likewise.
6570 * coffread.c (coff_start_symtab, complete_symtab): Likewise.
6571 * corefile.c (set_gnutarget): Likewise.
6572 * dbxread.c (add_new_header_file): Likewise.
6573 * demangle.c (set_demangling_command, set_demangling_style): Likewise.
6574 * event-top.c (push_prompt, pop_prompt, command_line_handler)
6575 (set_async_prompt): Likewise.
6576 * infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
6578 * language.c (set_language_command, _initialize_language): Likewise.
6579 * linespec.c (decode_line_2): Likewise.
6580 * rs6000-nat.c (add_vmap): Likewise.
6581 * top.c (set_prompt, init_history, init_main): Likewise.
6582 * tracepoint.c (stringify_collection_list): Likewise.
6583 * varobj.c (varobj_create): Remove variable expr_len. Replace the
6584 savestring calls by xstrdup calls where possible.
6585 (value_of_root, c_name_of_variable, c_describe_child): Replace the
6586 savestring calls by xstrdup calls where possible.
6587 * xcoffread.c (complete_symtab): Likewise.
6588 * cli/cli-script.c (build_command_line, define_command): Likewise.
6589 * cli/cli-setshow.c (do_setshow_command): Likewise.
6591 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
6593 Remove already unreachable code.
6594 * varobj.c (varobj_get_handle): Fix comment when error is called.
6595 All callers updated.
6597 2009-05-23 Eli Zaretskii <eliz@gnu.org>
6599 * README (`configure' options): Document GDB-specific options to
6602 * symtab.c (skip_prologue_using_lineinfo): New function.
6603 (find_function_start_sal): Use it to get to the first line of
6604 function's body that has an entry in the lineinfo table.
6606 * symmisc.c (dump_symtab): Switch the current language to
6607 the language of the symtab we are dumping only if the symtab's
6608 language is neither language_auto nor language_unknown.
6610 * coffread.c (coff_symtab_read): Set language_minimal as the
6611 language for the "_globals_" pseudo-file.
6612 (process_coff_symbol): Set the symbol's language to the language
6615 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6617 * target.h (struct section_table): Rename to ...
6618 (struct target_section): ... this.
6619 * exec.c: Adjust all references.
6620 * exec.h: Adjust all references.
6621 * nto-tdep.c: Adjust all references.
6622 * nto-tdep.h: Adjust all references.
6623 * ppc-linux-tdep.c: Adjust all references.
6624 * rs6000-nat.c: Adjust all references.
6625 * s390-tdep.c: Adjust all references.
6626 * solib-darwin.c: Adjust all references.
6627 * solib-frv.c: Adjust all references.
6628 * solib-irix.c: Adjust all references.
6629 * solib-null.c: Adjust all references.
6630 * solib-osf.c: Adjust all references.
6631 * solib-pa64.c: Adjust all references.
6632 * solib-som.c: Adjust all references.
6633 * solib-sunos.c: Adjust all references.
6634 * solib-svr4.c: Adjust all references.
6635 * solib-target.c: Adjust all references.
6636 * solib.c: Adjust all references.
6637 * solist.h: Adjust all references.
6638 * symfile.c: Adjust all references.
6639 * symfile.h: Adjust all references.
6640 * target.c: Adjust all references.
6642 2009-05-22 Hui Zhu <teawater@gmail.com>
6644 Add sys_fcntl argument interfaces to linux_record_tdep.
6646 * linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
6647 fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
6649 * i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
6650 I386_LINUX_RECORD_FCNTL_F_GETLK64,
6651 I386_LINUX_RECORD_FCNTL_F_SETLK64,
6652 I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
6653 of I386 Linux sys_fcntl arguments.
6654 (i386_linux_init_abi): Set macros values to linux_record_tdep.
6655 * linux-record.c (record_linux_system_call): Change to use
6656 the interface in linux_record_tdep in sys_fcntl and
6659 * linux-record.c (record_linux_system_call): Fix the process
6660 record build error about type in CYGWIN.
6662 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6664 * inflow.c (kill_command): Delete left over static declaration.
6666 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6668 * bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
6670 (struct section_closure): Delete.
6671 (add_to_section_table): Delete.
6672 (build_target_sections_from_bfd): Delete.
6673 (target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
6674 (target_bfd_reopen): Use build_section_table.
6675 * exec.c (xfer_memory): Move most code except for overlay
6676 debugging support from here...
6677 (section_table_xfer_memory): ... to this new function.
6678 (section_table_xfer_memory_partial): New.
6679 * exec.h (section_table_xfer_memory_partial): Declare.
6680 * bfd-target.h (build_target_sections_from_bfd): Delete
6683 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6685 * remote.c (compare_sections_command): Don't declare exec_bfd.
6686 * tracepoint.c: Include "gdbcore.h".
6687 (remote_set_transparent_ranges): Don't declare exec_bfd.
6689 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6691 * aix-thread.c (init_aix_thread_ops): Whitespace.
6693 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6695 * dec-thread.c (dec_thread_wait): Add options parameter. Use it
6696 to call the to_wait method in the target beneath.
6697 * remote-m32r-sdi.c (m32r_wait): Add options parameter.
6699 2009-05-21 Joel Brobecker <brobecker@adacore.com>
6701 * aix-thread.c (aix_thread_wait): Add options parameter. Use it
6702 to call the to_wait method in the target_beneath.
6704 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6706 * linux-nat.c (linux_nat_terminal_inferior)
6707 (linux_nat_terminal_ours): Don't check sync_execution.
6708 * remote.c (remote_terminal_inferior, remote_terminal_ours):
6709 Don't check sync_execution. Update comments.
6710 * target.c (target_terminal_inferior): New.
6711 * target.h (target_terminal_inferior): Delete macro, and declare
6713 * event-top.c (async_disable_stdin): Make idempotent. Don't give
6714 the target the terminal here.
6715 * inflow.c (terminal_ours_1): Don't return early without setting
6718 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6720 * target.h (TARGET_WNOHANG): New.
6721 * target.c (target_wait): Add `options' argument. Adjust.
6722 (struct target_ops) <to_wait>: Add `options' argument.
6723 (target_wait): Add `options' argument.
6724 * infrun.c (wait_for_inferior): Pass 0 as options to
6725 target_wait (blocking wait).
6726 (fetch_inferior_event): Pass TARGET_WNOHANG as options to
6728 * fork-child.c (startup_inferior): Pass 0 as options to
6729 target_wait (blocking wait).
6730 * linux-nat.c (linux_nat_create_inferior): Remove async masking.
6731 (linux_nat_wait_1): Add `target_options' argument. Use it instead
6732 of checking on target_can_async_p.
6733 (linux_nat_wait): Add `target_options' argument. Adjust.
6734 * remote.c (remote_wait_ns): Add `options' argument. Adjust to
6735 check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
6736 (remote_wait_as): Add `options' argument. Adjust to check on
6737 TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
6738 a blocking wait, keep waiting until an interesting event comes
6740 (remote_wait): Add `options' argument. Don't loop here if the
6741 target is in async mode, and a blocking wait has been requested.
6743 * top.c (deprecated_target_wait_hook): Add `options' argument.
6744 * linux-thread-db.c (thread_db_wait): Add `options' argument, and
6745 pass it down to the layer beneath.
6746 * inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
6747 * record.c (record_beneath_to_wait): Add `options' argument.
6748 (record_wait): Add `options' argument, and pass it down to the
6750 * bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
6751 * darwin-nat.c (darwin_wait): Likewise.
6752 * defs.h (deprecated_target_wait_hook): Likewise.
6753 * gnu-nat.c (gnu_wait): Add `options' argument.
6754 * go32-nat.c (go32_wait): Likewise.
6755 * hpux-thread.c (hpux_thread_wait): Add `options' argument, and
6756 pass it down to the layer beneath.
6757 * inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
6758 * monitor.c (monitor_wait): Likewise.
6759 * nto-procfs.c (procfs_wait): Likewise.
6760 * remote-mips.c (mips_wait): Add `options' argument.
6761 * remote-sim.c (gdbsim_wait): Likewise.
6762 * rs6000-nat.c (rs6000_wait): Add `options' argument.
6763 * sol-thread.c (sol_thread_wait): Add `options' argument, and pass
6764 it down to the layer beneath.
6765 * spu-linux-nat.c (spu_child_wait): Add `options' argument.
6766 * windows-nat.c (windows_wait): Likewise.
6767 * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
6769 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6771 * mi/mi-interp.c (mi_on_resume): Account for whole process
6774 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6776 * m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.
6778 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6780 * dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.
6782 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6784 Fix parsing DW_AT_const_value using DW_FORM_string.
6785 * dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.
6787 2009-05-20 Joel Brobecker <brobecker@adacore.com>
6789 * aix-thread.c (giter_count): Do not count the main thread.
6790 (giter_accum): Do not include the main thread.
6792 2009-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
6794 Remove the PROT parameter from openp.
6795 * source.c (openp): Remove the parameter PROT. Assertion check MODE.
6796 defs.h (openp): Update the prototype.
6797 Update all the openp callers.
6799 2009-05-19 Pedro Alves <pedro@codesourcery.com>
6801 * inflow.c (kill_command): Moved to infcmd.c.
6802 (_initialize_inflow): Don't add the "kill" command or clear
6804 * infcmd.c (kill_command): Moved here from inflow.c.
6805 (_initialize_infcmd): Add the "kill" command here.
6807 2009-05-19 Pedro Alves <pedro@codesourcery.com>
6809 * fork-child.c: Don't include frame.h. Include terminal.h.
6810 (fork_inferior): Call new_tty_postfork after forking adn adding
6811 the child to the inferior list.
6812 * inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
6814 * inflow.c (struct terminal_info): Remove const qualifier from
6815 `run_terminal' field.
6816 (inferior_thisrun_terminal): Tweak comment.
6817 (inflow_inferior_exit): Release the `run_terminal' field.
6818 (copy_terminal_info): New function.
6819 (new_tty_postfork): New function.
6820 * terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
6821 (copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
6822 * inf-ptrace.c: Include terminal.h.
6823 (inf_ptrace_follow_fork): Copy the parent's terminal info to the
6825 * linux-nat.c: Include terminal.h.
6826 (linux_child_follow_fork): Copy the parent's terminal info to the
6828 * inf-ttrace.c: Include terminal.h.
6829 (inf_ttrace_follow_fork): Copy the parent's terminal info to the
6832 2009-05-19 Pedro Alves <pedro@codesourcery.com>
6834 * breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
6835 (update_global_location_list): Use gdbarch_has_global_breakpoints
6836 instead of gdbarch_has_global_solist and
6837 target_supports_multi_process.
6838 * dicos-tdep.c (dicos_init_abi): Set
6839 gdbarch_has_global_breakpoints.
6840 * gdbarch.sh (has_global_solist): Update comment.
6841 (has_global_breakpoints): New.
6842 * remote.c (remote_start_remote): Use
6843 gdbarch_has_global_breakpoints instead of
6844 gdbarch_has_global_solist.
6845 * target.c (target_detach): Use gdbarch_has_global_breakpoints
6846 instead of gdbarch_has_global_solist.
6847 * infcmd.c (attach_command): Use gdbarch_has_global_solist instead
6848 of target_supports_multi_process.
6850 2009-05-18 Paul Pluzhnikov <ppluzhnikov@google.com>
6852 * objc-lang.c (find_methods): Plug a small memory leak.
6854 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6856 * solib-svr4.c: Include observer.h.
6857 (debug_base, debug_loader_offset_p, debug_loader_offset)
6858 (debug_loader_name, main_lm_addr): Move these globals...
6859 (struct svr4_info): ... into this new structure.
6860 (svr4_info_p): New typedef.
6861 (svr4_info): New global.
6862 (get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
6864 (locate_base, solib_svr4_r_map, solib_svr4_r_brk)
6865 (solib_svr4_r_ldsomap): Add svr4_info argument. Adjust to
6867 (open_symbol_file_object): Adjust to per-inferior svr4.
6868 (svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
6870 (enable_break): Add svr4_info argument. Adjust to per-inferior
6872 (enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
6873 Adjust to per-inferior svr4.
6874 (_initialize_svr4_solib): Install the solib_svr4_inferior_exit
6877 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6879 * linux-nat.h (linux_proc_get_tgid): Declare.
6880 * linux-nat.c (linux_proc_get_tgid): New.
6881 * linux-thread-db.c (struct thread_db_info): New field
6882 `need_stale_parent_threads_check'.
6883 (add_thread_db_info): Set it.
6884 (find_new_threads_callback): Ignore stale fork parent threads.
6885 (thread_db_resume): New.
6886 (init_thread_db_ops): Install thread_db_resume.
6888 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6890 * fork-child.c (fork_inferior): Only reset the thread list if this
6891 is the first inferior.
6892 (startup_inferior): If the target support multi-process, tell it
6893 to resume only the new process.
6894 * linux-nat.c (num_lwps): Delete global.
6895 (purge_lwp_list): New function.
6896 (num_lwps): New function.
6897 (add_lwp, delete_lwp): Adjust.
6899 (iterate_over_lwps): Add filter argument. Handle it.
6900 (linux_nat_attach): Remove FIXME note.
6901 (linux_nat_detach): Adjust to iterate over threads of the inferior
6902 we're detaching from. Adjust to num_lwps being a function. Don't
6903 assume the head of the lwp list is the main thread of the process
6904 we're detaching from. Don't destroy the LWP list.
6905 (resume_callback): Add debug output.
6906 (linux_nat_resume): Handle resuming a single inferior. Allow a
6907 wildcard resume in non-stop mode.
6908 (linux_handle_extended_wait): Don't assume inferior_ptid is the
6909 correct inferior of the parent LWP.
6910 (status_callback): Also check lp->waitstatus.
6911 (select_event_lwp): Add new filter parameter. Handle it.
6912 (linux_nat_filter_event): Adjust to num_lwps being a function.
6913 (linux_nat_wait_1): When adding the first lwp of the inferior, use
6914 an is_lwp check instead of checking for the number of lwps.
6915 (linux_nat_wait_1): Handle waiting for a specific tgid. Handle
6916 pending process exit statuses.
6917 (linux_nat_mourn_inferior): Don't destroy all the LWP info.
6918 Instead delete LWPs of the inferior that we're mourning. Don't
6919 unregister from the event loop here.
6920 (linux_nat_pid_to_str): Use `num_lwps'.
6921 (linux_nat_make_corefile_notes): Adjust to walk over lwps of a
6923 (linux_nat_is_async_p): Check if async was masked out.
6924 (linux_multi_process): New global.
6925 (linux_nat_supports_multi_process): New.
6926 (linux_nat_stop_lwp): Remove LWP filtering. It is done by the
6928 (linux_nat_stop): Adjust to make iterate_over_lwps itself do the
6930 (linux_nat_close): New.
6931 (linux_nat_add_target): Register linux_nat_close and
6932 linux_nat_supports_multi_process.
6933 * linux-nat.h (iterate_over_lwps): Add filter argument.
6934 * linux-thread-db.c (thread_db_handle): Delete.
6935 (proc_handle, thread_agent, td_init_p, td_ta_new_p)
6936 (td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
6937 (td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
6938 (td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
6939 (td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
6940 longer globals, moved to...
6941 (struct thread_db_info): ... this new structure.
6942 (thread_db_list): New.
6943 (add_thread_db_info, get_thread_db_info, delete_thread_db_info):
6945 (have_threads_callback): Filter out threads of all inferiors but
6946 the one specified by the ARGS argument.
6947 (have_threads): Add ptid argument specifying the inferior we're
6948 interested in. Handle it.
6949 (struct thread_get_info_inout): New.
6950 (thread_get_info_callback, thread_from_lwp): Adjust to use it.
6951 (thread_db_attach_lwp): Check that inferior of the passed in
6952 thread is using thread-db. Adjust.
6953 (enable_thread_event): Remove thread_agent parameter. Instead,
6954 get it from the per-inferior thread-db info.
6955 (dladdr_to_soname): Move higher up.
6956 (enable_thread_event_reporting): Adjust to use per-inferior
6958 (try_thread_db_load_1): Replace `handle' parameter by a
6959 thread_db_info parameter. Adjust to use per-inferior thread-db
6961 (try_thread_db_load): Adjust to use per-inferior thread-db info.
6962 (thread_db_load, disable_thread_event_reporting): Ditto.
6963 (check_for_thread_db): Remove conditional reporting of which
6964 libthread_db is in use.
6965 (thread_db_new_objfile): Add comment about inferior_ptid.
6966 (attach_thread): Adjust to use per-inferior thread-db info.
6967 (thread_db_detach): Adjust to use per-inferior thread-db info.
6968 Remove thread event breakpoints of the current inferior. Only
6969 unpush the thread-db target if there are no more processes using
6971 (check_event): Adjust to use per-inferior thread-db info.
6972 (thread_db_wait): Adjust to use per-inferior thread-db info. Only
6973 unpush the thread-db target if there are no more processes using
6975 (thread_db_mourn_inferior): Adjust to use per-inferior thread-db
6976 info. Mark breakpoints of the current inferior out before
6977 deleting them. Only unpush the thread-db target if there are no
6978 more processes using it.
6979 (find_new_threads_callback): Adjust to use per-inferior thread_db
6981 (thread_db_find_new_threads_1): Add new ptid argument. Adjust to
6982 use per-inferior thread-db info.
6983 (thread_db_find_new_threads): Adjust to use per-inferior thread-db
6985 (thread_db_get_thread_local_address): Adjust.
6986 (thread_db_get_ada_task_ptid): Adjust.
6987 * inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
6988 if there no more processes left to debug.
6989 * thread.c (set_running, set_executing): Handle resuming all
6990 threads of a single inferior.
6991 * mi/mi-interp.c (mi_output_running_pid): New.
6992 (mi_inferior_count): New.
6993 (mi_on_resume): For backwards compatibility, if resuming all
6994 threads of an inferior, and there is only one inferior, output
6997 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6999 * ada-lang.c (ada_find_any_type): Move check for primitive types ...
7000 (to_fixed_range_type): ... to here.
7002 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7004 * ada-lang.c (desc_data_type): Remove, replace by ...
7005 (desc_data_target_type): ... this.
7006 (thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
7007 (ada_is_array_descriptor_type): Likewise.
7008 (ada_type_of_array): Likewise.
7009 (ada_coerce_to_simple_array_type): Likewise.
7010 (ada_array_element_type): Likewise.
7012 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7014 * ada-valprint.c (ada_val_print_1): Use val_print_string to print
7015 result of ada_vax_float_print_function inferior call.
7017 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7019 * ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
7020 avoid creating a dummy value.
7022 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7024 * p-valprint.c (pascal_val_print): Use extract_typed_address
7025 to extract reference value.
7027 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7029 * doublest.c (NAN): Remove unused define.
7030 (extract_floating_by_length, deprecated_extract_floating): Remove.
7031 (store_floating_by_length, deprecated_store_floating): Remove.
7032 (extract_typed_floating): Do not call extract_floating_by_length.
7033 (store_typed_floating): Do not call store_floating_by_length.
7034 (convert_typed_floating): Remove redundant assertions.
7035 * doublest.h (deprecated_extract_floating): Remove.
7036 (deprecated_store_floating): Remove.
7037 * sh64-tdep.c (sh64_register_convert_to_raw): Call
7038 extract_typed_floating instead of deprecated_extract_floating.
7040 2009-05-18 Jon Beniston <jon@beniston.com>
7042 * MAINTAINERS: Add lm32 target.
7043 * Makefile.in: Add lm32 dependencies.
7044 * NEWS: Indicate lm32 is a new target.
7045 * configure.tgt: Add lm32 targets.
7046 * lm32-tdep.c: New file.
7048 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7050 * corelow.c (core_open): Flush the register cache before doing
7051 anything with registers.
7053 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7055 * inflow.h (our_process_group): Remove declaration.
7056 (inferior_process_group): Delete global variable declaration.
7057 (inferior_process_group): New function declaration.
7058 * inflow.c: Include observer.h.
7059 (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
7061 (struct terminal_info): New struct.
7062 (our_terminal_info): New global.
7063 (inferior_process_group): New function.
7064 (inferior_thisrun_terminal): Extend description comment.
7065 (gdb_has_a_terminal): Adjust to write to our_terminal_info fields
7067 (terminal_init_inferior_with_pgrp): Adjust to per-inferior
7069 (terminal_inferior): Ditto.
7070 (terminal_ours_1): Ditto.
7071 (inflow_new_inferior, inflow_inferior_exit): New functions.
7072 (child_terminal_info): Adjust to per-inferior terminal settings.
7073 (osig_set): New global.
7074 (set_sigint_trap): Adjust to per-inferior terminal settings. Set
7075 or clear `osig_set' accordingly.
7076 (clear_sigint_trap): Check `osig_set' to decide wheater to restore
7077 SIGINT handler, instead of checking the current inferior (which
7079 (_initialize_inflow): Attach inflow_new_inferior and
7080 inflow_inferior_exit to the "new_inferior" and "inferior_exit"
7081 notifications, respectively.
7082 * inferior.h (struct terminal_info): Forward declare.
7083 (struct inferior): Add `terminal_info' field.
7084 * inferior.c (delete_inferior_1): Notify the inferior_exit
7085 observers before removing the inferior from the lists and deleting
7087 * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
7088 a function instead of a variable. Adjust.
7089 * procfs.c (procfs_stop): Ditto.
7091 2009-05-17 Pedro Alves <pedro@codesourcery.com>
7093 * infrun.c (handle_inferior_event): When handling a
7094 TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
7096 * linux-nat.c (linux_child_follow_fork): Only detach breakpoints
7097 from the child if vforking.
7098 * inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
7099 breakpoints from the child here.
7101 2009-05-17 Pedro Alves <pedro@codesourcery.com>
7103 * infrun.c (pending_follow): Remove execd_pathname member.
7104 (resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
7105 (handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
7106 event, don't copy `execd_pathname' to pending_follow, use the
7107 event copy instead. Release `execd_pathname' once done with
7110 * infrun.c (pending_follow): Remove mention of exec events.
7112 2009-05-17 Hui Zhu <teawater@gmail.com>
7114 * i386-tdep.c (i386_process_record): Make it extern.
7115 (i386_gdbarch_init): Don't call set_gdbarch_process_record
7117 * i386-tdep.h (i386_process_record): Declare.
7118 * i386-linux-tdep.c (i386_linux_init_abi): Call
7119 set_gdbarch_process_record.
7121 2009-05-17 Vladimir Prus <vladimir@codesourcery.com>
7123 Always report varobj as changed when in_scope attribute changes.
7125 * varobj.c (install_new_value): If non-NULL-ness of value
7128 2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
7130 * NEWS: Mention set/show libthread-db-search-path.
7131 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
7132 (LIBTHREAD_DB_SO): Moved from linux-thread-db.c
7133 * linux-thread-db.c (libthread_db_search_path): New setting.
7134 (thread_db_handle): New variable (replaces using_thread_db).
7135 (try_thread_db_load_1): New function.
7136 (try_thread_db_load, thread_db_load_search): Likewise.
7137 (dladdr_to_soname): Likewise.
7138 (thread_db_load): Iterate over possibly multiple libthread_db's.
7139 (check_for_thread_db): Attempt to load new libthread_db.
7140 (thread_db_detach, thread_db_wait): Unload libthread_db.
7141 (thread_db_mourn_inferior): Likewise.
7142 (_initialize_thread_db): Add new libthread-db-search-path option.
7143 Defer loading of libthread_db to check_for_thread_db.
7144 * solib.c (libpthread_name_p): New function.
7145 (libpthread_solib_p): Call it.
7146 * solib.h (libpthread_name_p): New prototype.
7148 2009-05-15 Pierre Muller <muller@ics.u-strasbg.fr>
7150 * MAINTAINERS: Update my email address.
7152 2009-05-14 Paul Pluzhnikov <ppluzhnikov@google.com>
7154 * breakpoint.h: Add breakpoint_re_set_objfile prototype.
7155 * breakpoint.c (create_overlay_event_breakpoint): Renamed
7156 from create_overlay_event_breakpoint_1, old
7157 create_overlay_event_breakpoint deleted.
7158 (breakpoint_re_set_objfile): Don't rescan all objfiles
7160 (breakpoint_re_set): New function.
7161 * symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
7162 instead of breakpoint_re_set.
7163 * objfiles.c (objfile_relocate): Likewise.
7165 2009-05-14 Joel Brobecker <brobecker@adacore.com>
7167 * gdbarch.sh: Add comment documenting the target_gdbarch global.
7168 gdbarch.h does NOT need to be regenerated as the corresponding
7169 change has already been made in a previous commit.
7171 2009-05-14 Pierre Muller <muller@ics.u-strasbg.fr>
7173 Remove all i386 debug register low level macros in config nm files.
7174 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
7175 (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
7176 (I386_USE_GENERIC_WATCHPOIINTS): Remove.
7178 * i386-nat.h: New file (adapted from config/i386/nm-i386.h).
7179 (struct i386_dr_low_type): New type.
7180 (i386_dr_low): New global variable.
7181 * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
7182 (i386_insert_aligned_watchpoint): Replace i386 dr low macros by
7183 i386_dr_low struct variable fields.
7184 (i386_remove_aligned_watchpoint): Likewise.
7185 (i386_stopped_data_address): Likewise.
7186 (i386_stopped_by_hwbp): Likewise.
7187 (show_debug_regs_command_added): New static variable.
7188 (add_show_debug_regs_command): New static function.
7189 (i386_use_watchpoints): Call add_show_debug_regs_command if not done.
7190 (i386_set_debug_register_length): New function.
7191 (_initialize_i386_nat): Delete.
7193 * amd64-linux-nat.c: Include "i386-nat.h".
7194 (amd64_linux_dr_set_control): Change to static.
7195 (amd64_linux_dr_get_status): Change to static.
7196 (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
7197 (_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
7199 * go32-nat.c: Include "i386-nat.h".
7200 (go32_set_addr): Change to static.
7201 (go32_set_dr7): Change to static. Change arg type to unisgned long.
7202 (go32_get_dr6): Change to static. Change return type to unisnged long.
7203 (init_go32_ops): Set i386_dr_low variable fields.
7204 * i386-linux-nat.c: Include "i386-nat.h".
7205 (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
7206 (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
7207 (_initialize_i386_linux_nat): Set i386_dr_low variable fields.
7208 * i386bsd-nat.h: Declare functions used for
7209 i386_dr_low fields in i386fbsd-nat.c.
7210 * i386fbsd-nat.c: Include "i386-nat.h".
7211 (_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
7212 * windows-nat.c: Include "i386-nat.h".
7213 (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
7215 (cygwin_get_dr6): Change return type to unisnged long.
7216 (cygwin_set_dr7): Change arg type to unisgned long.
7217 (init_windows_ops): Set i386_dr_low function fields.
7219 * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call
7220 i386_set_debug_register_length.
7221 * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.
7223 * config/i386/nm-cygwin.h: Remove all I386_* macros.
7224 * config/i386/nm-cygwin64.h: Likewise.
7225 * config/i386/nm-fbsd.h: Likewise.
7226 * config/i386/nm-linux.h: Likewise.
7227 * config/i386/nm-i386.h: Remove completely.
7228 * config/i386/nm-go32.h: Remove completely.
7229 * config/i386/nm-linux64.h: Remove completely.
7230 * config/i386/go32.mh (NAT_FILE): Remove entry.
7231 * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
7233 2009-05-14 Jon Beniston <jon@beniston.com>
7235 * MAINTAINERS: Add Jon Beniston to write after approval list.
7237 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
7239 * objc-lang.c (objc_objfile_data): New variable.
7240 (find_methods): Skip objfiles without Obj-C methods.
7241 (_initialize_objc_lang): New function.
7243 2009-05-13 Joel Brobecker <brobecker@adacore.com>
7245 * c-lang.c (print_wchar): Remove unnecessary cast.
7247 2009-05-12 Jim Blandy <jimb@red-bean.com>
7249 * MAINTAINERS: Remove self as m32c target maintainer.
7251 2009-05-12 Pedro Alves <pedro@codesourcery.com>
7253 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
7254 * command.h (deprecated_add_set_cmd): Delete declaration.
7255 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
7256 'set debug gnu-nat' and 'show debug gnu-nat'.
7257 * i386-nat.c (_initialize_i386_nat): Replace 'maint
7258 show-debug-registers' with 'maint set show-debug-registers' and
7259 'maint show show-debug-registers'.
7260 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
7261 show-debug-registers' with 'maint set show-debug-registers' and
7262 'maint show show-debug-registers'.
7264 2009-05-12 Joel Brobecker <brobecker@adacore.com>
7266 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
7267 pushing it on the output obstack.
7269 2009-05-11 Joel Brobecker <brobecker@adacore.com>
7271 Fix internal error on breaking at a multi-locations caller source line.
7272 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
7273 command with no parameters.
7275 2009-05-11 Pedro Alves <pedro@codesourcery.com>
7277 * linux-nat.c (enum sigchld_state): Delete.
7278 (linux_nat_async_events_state): Delete.
7279 (struct waitpid_result): Delete.
7280 (waitpid_queue): Delete.
7281 (queued_waitpid_1): Delete.
7282 (async_file_flush): New.
7283 (queued_waitpid, push_waitpid): Delete.
7284 (async_file_mark): New.
7285 (drain_queued_events): Delete.
7286 (my_waitpid): Remove locally queued events handling.
7287 (linux_test_for_tracefork): Upjust.
7288 (linux_child_follow_fork): Ditto.
7289 (sync_sigchld_action): Delete.
7290 (blocked_mask): Reinstate.
7291 (async_sigchld_action): Rename to...
7292 (sigchld_action): ... this.
7293 (block_child_signals): New.
7294 (restore_child_signals_mask): New.
7295 (lin_lwp_attach_lwp): Adjust.
7296 (linux_nat_create_inferior): Ditto.
7297 (linux_nat_attach): Also use lp->status in async mode.
7298 (get_pending_status): Don't use queued_waitpid.
7299 (linux_nat_detach): Don't drain locally queued events.
7300 (linux_nat_resume): Allow pending wait statuses stored lp->status
7301 in async mode. If returning early due to a pending event,
7302 re-register the event source.
7303 (stop_wait_callback): Allow pending wait statuses stored
7304 lp->status in async mode.
7305 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
7306 (linux_nat_wait): Rename to ...
7307 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
7308 lp->status in async mode. Always add WNOHANG to the waitpid
7309 options in async mode.
7310 (linux_nat_wait): New.
7311 (kill_callback): Don't drain locally queued events.
7312 (sigchld_handler): Rewrite.
7313 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
7314 refer to "set target-async".
7315 (linux_nat_async_mask): If in non-stop, and re-enabling async
7316 mode, re-register the target event source in the event loop.
7317 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
7318 (get_pending_events, async_sigchld_handler)
7319 (linux_nat_async_events): Delete.
7320 (handle_target_event): New.
7321 (linux_nat_async_file_handler): Delete.
7322 (linux_async_pipe): New.
7323 (linux_nat_async): Only re-register in the event loop if not
7324 registered yet. Always notify the event-loop once if enabling the
7326 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
7327 lp->status, not in the locally queued event list.
7328 (linux_nat_stop): Don't mask out async event handling.
7329 (linux_nat_setup_async): Delete.
7330 (_initialize_linux_nat): Adjust.
7331 (lin_thread_get_thread_signals): blocked_mask is global again.
7334 2009-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
7336 Unify target macros.
7338 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
7339 (target_stoppped_by_watchpoint): New macro.
7340 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
7341 (target_have_steppable_watchpoint): New macro.
7342 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
7343 (target_have_continuable_watchpoint): New macro.
7344 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
7345 (target_can_use_hardware_watchpoint): New macro.
7346 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
7347 (target_region_ok_for_hw_watchpoint): New macro.
7349 * breakpoint.c (update_watchpoint): Use new macros.
7350 (bpstat_alloc): Likewise.
7351 (create_breakpoint): Likewise.
7352 (watch_command_1): Likewise.
7353 (can_use_hardware_watchpoint): Likewise.
7354 (do_enable_breakpoint): Likewise.
7355 * infrun.c (handle_inferior_event): Adapt to new macros.
7356 * mips-tdep.c (mips_gdbarch_init): Update comments.
7357 * procfs.c (procfs_set_watchpoint): Update comment.
7358 (procfs_insert_watchpoint): Adapt to new macros.
7359 * remote-m32r-sdi.c (m32r_stop):
7360 * remote-mips.c (mips_remove_breakpoint):
7361 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
7362 (debug_to_stopped_by_watchpoint): Likewise.
7365 2009-05-10 Pierre Muller <muller@ics.u-strasbg.fr>
7367 * src/gdb/target.h: Remove all tests for already defined
7368 macros. All macros defined here should not be set in config
7371 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7373 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
7374 (have_ptrace_getsetfpregs): Likewise.
7375 fetch_all_gp_regs): New function.
7376 (fetch_gp_regs): New function.
7377 (fetch_all_fp_regs): Likewise.
7378 (fetch_fp_regs): New function.
7379 (fetch_ppc_registers): Using the new methods to fetch general-
7380 purpose and floating-pointer registers.
7381 (store_all_gp_regs): New function.
7382 (store_gp_regs): Likewise.
7383 (store_all_fp_regs): New function.
7384 (store_fp_regs): Likewise.
7385 (store_ppc_registers): Using the new methods to store general-
7386 purpose and floating-pointer registers.
7388 2009-05-08 Doug Evans <dje@google.com>
7390 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
7392 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7394 * MAINTAINERS (Write After Approval): Add self.
7396 2009-05-07 Joel Brobecker <brobecker@adacore.com>
7398 * gdbarch.h (target_gdbarch): Add comment documenting this global.
7400 2009-05-06 Joel Brobecker <brobecker@adacore.com>
7402 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
7404 * configure: Regenerate.
7406 2009-05-06 Joel Brobecker <brobecker@adacore.com>
7408 * utils.c: Add include of gdb_usleep.h.
7409 (defaulted_query): Detect false EOF conditions that happen
7410 on terminals opened with the O_NONBLOCK flag when there is
7413 2009-05-06 Pedro Alves <pedro@codesourcery.com>
7415 * inferior.c (add_inferior): Move observer_notify_new_inferior
7417 (add_inferior_silent): ... here.
7419 2009-05-06 Pierre Muller <muller@ics.u-strasbg.fr>
7420 Pedro Alves <pedro@codesourcery.com>
7422 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
7423 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
7425 (procfs_stopped_by_watchpoint): Made static, ptid argument
7427 (_initialize_procfs): Register new watchpoint related target
7429 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
7430 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
7431 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
7432 (target_insert_watchpoint, target_remove_watchpoint): Delete.
7433 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
7435 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
7436 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
7437 (target_insert_watchpoint, target_remove_watchpoint): Delete.
7438 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
7440 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
7441 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
7442 (target_insert_watchpoint, target_remove_watchpoint): Delete.
7443 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
7446 2009-05-06 Hui Zhu <teawater@gmail.com>
7448 * i386-tdep.c (i386_process_record): Change bzero to memset.
7450 2009-05-06 Hui Zhu <teawater@gmail.com>
7452 * NEWS: Add item for process record and replay.
7454 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
7456 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
7458 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
7460 * inferior.h (read_pc, write_pc): Remove.
7461 * regcache.c (read_pc, write_pc): Remove.
7463 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
7465 (handle_inferior_event): Use regcache_read_pc instead of read_pc
7466 when determining value of stop_pc. Replace subsequent uses of
7467 read_pc by inspecting already-retrieved stop_pc value.
7468 (keep_going): Use regcache_read_pc instead of read_pc.
7470 * breakpoint.c (watchpoint_check): Use current frame architecture
7471 and PC instead of current_gdbarch and read_pc ().
7472 * tracepoint.c (set_traceframe_context): Replace PC argument
7473 with FRAME argument.
7474 (trace_start_command, finish_tfind_command): Update calls.
7475 (finish_tfind_command): Compare frame IDs to identify transitions
7477 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
7478 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
7479 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
7480 of read_pc and write_pc.
7481 (store_register): Make regcache argument non-const. Update call
7482 to exec_one_dummy_insn.
7484 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
7485 * infcmd.c (post_create_inferior): Likewise.
7486 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
7487 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
7488 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
7489 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
7490 * linux-fork.c (fork_load_infrun_state): Likewise.
7491 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
7492 * record.c (record_wait): Likewise.
7493 * procfs.c (procfs_wait): Likewise.
7494 * remote-mips.c (common_open, mips_wait): Likewise.
7495 * remote-m32r-sdi.c (m32r_resume): Likewise.
7497 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
7498 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
7499 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
7500 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
7501 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
7503 * solib-darwin.c: Include "regcache.h".
7504 * solib-pa64.c: Include "regcache.h".
7505 * solib-svr4.c: Include "regcache.h.".
7507 * symfile.c: Do not mention read_pc or write_pc in comments.
7508 * dink32-rom.c: Likewise.
7509 * m32r-rom.c: Likewise.
7510 * mips-tdep.c: Likewise.
7512 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
7514 * fork-child.c (startup_inferior): Move setting stop_pc ...
7515 * infcmd.c (post_create_inferior): ... to here.
7517 2009-05-04 Michael Snyder <msnyder@vmware.com>
7519 * NEWS: Add item for reverse debugging commands.
7521 2009-05-04 Pedro Alves <pedro@codesourcery.com>
7523 * go32-nat.c (go32_stop): Delete.
7524 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
7525 (go32_create_inferior): Don't call go32_stop or
7527 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
7529 (init_go32_ops): Don't register go32_stop.
7531 2009-05-02 Eli Zaretskii <eliz@gnu.org>
7533 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
7536 * infcall.c (find_function_addr): Avoid compiler warnings for
7539 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
7541 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
7542 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
7544 2009-05-01 Doug Evans <dje@google.com>
7546 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
7549 2009-05-01 Eli Zaretskii <eliz@gnu.org>
7551 * record.c (_initialize_record): Reformat and clarify doc strings
7552 for stop-at-limit and insn-number-max.
7554 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
7556 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
7558 Make specifiable the make_function_type type memory ownership.
7559 * gdbtypes.c (make_function_type): New parameter `objfile', use it
7560 explicitely instead of TYPE-initialized removed local variable
7561 `objfile'. Describe `objfile' it in the function comment.
7562 (lookup_function_type): Update make_function_type callers.
7563 * gdbtypes.h (make_function_type): Update the prototype.
7564 * jv-lang.c (java_link_class_type): Update make_function_type callers.
7565 * dwarf2read.c (read_subroutine_type): Likewise.
7566 * stabsread.c (read_type): Likewise.
7568 2009-05-01 Eli Zaretskii <eliz@gnu.org>
7570 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
7571 printing a bogus "Thread <main>".
7572 (go32_thread_alive): Don't return 1 for null_ptid.
7574 * i386-tdep.c (i386_go32_init_abi): Override the number of
7575 registers due to non-support of SSE.
7577 2009-04-30 Anthony Green <green@moxielogic.com>
7579 * configure.tgt: Link the moxie simulator in with gdb.
7581 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
7583 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
7586 2009-04-30 Hui Zhu <teawater@gmail.com>
7587 Michael Snyder <msnyder@vmware.com>
7589 I386 Linux process record and replay support.
7591 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
7592 This struct has the argument for the function
7593 "record_linux_system_call".
7594 (i386_linux_intx80_sysenter_record): New function. Parse the
7595 system call instruction and call function
7596 "record_linux_system_call" to record execute log.
7597 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
7598 Set "i386_linux_intx80_sysenter_record" to
7599 "i386_intx80_record" and "i386_sysenter_record".
7601 2009-04-30 Hui Zhu <teawater@gmail.com>
7602 Michael Snyder <msnyder@vmware.com>
7604 I386 architecture process record and replay support.
7606 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
7607 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
7609 (aflag, dflag, override, modrm, mod, reg, rm, ot,
7610 i386_record_pc): New variables. Ditto.
7611 (i386_record_modrm, i386_record_lea_modrm_addr,
7612 i386_record_lea_modrm): New functions. Ditto.
7613 (i386_process_record): New function. Parse the instruction in
7614 address "addr" and record the values of registers and memory
7615 that will be changed by this instruction.
7616 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
7617 "process_record" interface.
7618 * i386-tdep.h (gdbarch_tdep): New function pointers
7619 "i386_intx80_record" and "i386_sysenter_record" that point to
7620 the function that can record "intx80" and "sysenter" execute
7623 2009-04-30 Hui Zhu <teawater@gmail.com>
7624 Michael Snyder <msnyder@vmware.com>
7626 * infrun.c (use_displaced_stepping): Return false if process
7627 record and replay target is used.
7628 (proceed): Call function "record_not_record_set" if pocess
7629 record and replay target is used.
7631 2009-04-30 Hui Zhu <teawater@gmail.com>
7632 Michael Snyder <msnyder@vmware.com>
7634 Linux process record and replay support.
7636 * Makefile.in (ALLDEPFILES): Add linux-record.c.
7637 (ALL_TARGET_OBS): Add linux-record.o.
7638 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
7639 (i[34567]86-*-linux*): Add linux-record.o.
7640 * linux-record.c, linux-record.h: New file.
7642 2009-04-30 Hui Zhu <teawater@gmail.com>
7643 Michael Snyder <msnyder@vmware.com>
7645 Process record and replay target.
7647 * Makefile.in (SFILES): Add record.c.
7648 (COMMON_OBS): Add record.o.
7649 * record.c, record.h: New file.
7651 2009-04-30 Hui Zhu <teawater@gmail.com>
7652 Michael Snyder <msnyder@vmware.com>
7654 * target.h (strata): New stratum "record_stratum".
7656 2009-04-30 Hui Zhu <teawater@gmail.com>
7657 Michael Snyder <msnyder@vmware.com>
7659 GDBARCH interface for process record and replay.
7661 * gdbarch.sh (process_record): This interface point to the
7662 function that records the inferior execute log.
7664 2009-04-29 Doug Evans <dje@google.com>
7666 * i386-nat.c (child_post_startup_inferior): Delete, unused.
7668 2009-04-29 Pedro Alves <pedro@codesourcery.com>
7670 * breakpoint.c (print_exception_catchpoint): Access `b' directly
7671 instead of `b->loc->owner'.
7672 (print_mention_exception_catchpoint): Ditto.
7674 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
7676 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
7678 2009-04-27 Tom Tromey <tromey@redhat.com>
7680 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
7682 2009-04-27 Jerome Guitton <guitton@adacore.com>
7684 * symtab.c (append_exact_match_to_sals): New function, extracted
7685 from expand_line_sal.
7686 (expand_line_sal): Use append_exact_match_to_sals to append exact
7687 matches. If none found, append all best items.
7689 2009-04-27 Jerome Guitton <guitton@adacore.com>
7691 * main.c (captured_main): Move gdbinit lookups after gdb_init.
7693 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
7696 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
7697 (read_func_scope): Call inherit_abstract_dies.
7699 2009-04-25 Eli Zaretskii <eliz@gnu.org>
7701 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
7702 sparc-sol2-nat.c and sparc-sol2-tdep.c.
7704 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
7706 2009-04-24 Pierre Muller <muller@ics.u-strasbg.fr>
7708 ARI change: Use "/* ARI: rule */" pattern.
7709 * utils.c: Update ARI patterns.
7710 * gdb_dirent.h: Likewise.
7712 2009-04-23 Anthony Green <green@moxielogic.com>
7714 * MAINTAINERS: Add moxie target.
7715 * configure.tgt: Add moxie-*-elf target.
7716 * moxie-tdep.c: New file.
7717 * moxie-tdep.h: New file.
7719 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7721 * ada-lang.c: Remove an extra empty line. No code change.
7723 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
7725 Fix double free on error inserting the breakpoint instruction.
7726 * breakpoint.c (create_breakpoints): Move the
7727 update_global_location_list call to ...
7728 (break_command_really): ... here together with the second local call
7729 both unified after all the cleanups.
7731 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7732 Tom Tromey <tromey@redhat.com>
7734 * configure, config.in: Regenerate.
7735 * configure.ac: Support for relocatable GDB datadir. Use
7736 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
7737 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
7738 * top.c (init_main): Add "set data-directory".
7739 * defs.h (gdb_datadir): Declare.
7740 * main.c (gdb_datadir): New global.
7741 (captured_main): Initialize gdb_datadir. Use relocate_directory.
7742 (relocate_path): New function.
7743 (relocate_directory): Likewise.
7744 (get_init_files): Use relocate_path.
7745 (README): Mention --with-gdb-datadir.
7747 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7749 * ada-tasks (task_command_1): Call target_find_new_threads.
7751 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7753 * stack.c (do_gdb_disassembly): Print the exception message if an
7754 error was thrown while trying to perform the disassembly.
7756 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
7758 * varobj.c (free_variable): Replace free_current_contents by xfree.
7760 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
7762 * arm-linux-nat.c (fetch_register, store_register): Use
7763 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
7764 * arm-linux-tdep.c (arm_linux_supply_gregset,
7765 arm_linux_collect_gregset): Likewise.
7766 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
7767 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
7769 2009-04-22 Hui Zhu <teawater@gmail.com>
7771 * stack.c (_initialize_stack): Set the default of
7772 disassemble-next-line to off.
7774 2009-04-21 Tom Tromey <tromey@redhat.com>
7776 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
7777 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
7779 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
7781 * configure.ac: Add quotes to not lose brackets in help text.
7782 * configure: Rebuild.
7784 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
7786 * configure.ac: Don't postprocess Makefile in config.status.
7787 Substitute GDB_NM_FILE. Don't substitute nm_h.
7788 * Makefile.in (GDB_NM_FILE): Substitute.
7789 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
7790 * configure: Regenerate.
7791 * gnulib/Makefile.in: Regenerate.
7793 2009-04-21 Joseph Myers <joseph@codesourcery.com>
7795 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
7796 --with-htmldir): New.
7797 * configure: Regenerate.
7799 2009-04-21 Tom Tromey <tromey@redhat.com>
7801 * configure: Rebuild.
7802 * configure.ac: Use lower case for start of help strings. Clean
7803 up --with-sysroot help.
7805 2009-04-21 Tom Tromey <tromey@redhat.com>
7807 * configure: Rebuild.
7808 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
7809 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
7812 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
7814 ARI fix: remove "%p".
7815 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
7816 (ia64_sigtramp_frame_this_id): Ditto.
7817 (ia64_libunwind_frame_this_id): Ditto.
7818 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
7819 * symmisc.c (maintenance_info_psymtabs): Ditto.
7821 2009-04-21 Joseph Myers <joseph@codesourcery.com>
7823 * configure.ac (--with-relocated-sources): New.
7824 * configure, config.in: Regenerate.
7825 * source.c (add_substitute_path_rule): Remove static.
7826 * source.h (add_substitute_path_rule): Declare.
7827 * main.c: Include "source.h".
7828 (captured_main): Add substitution rule if RELOC_SRCDIR.
7830 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
7832 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
7834 2009-04-20 David Daney <ddaney@caviumnetworks.com>
7836 * NEWS: Mention MIPS/Linux hardware watchpoint support.
7838 2009-04-20 David Daney <ddaney@caviumnetworks.com>
7840 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
7841 (maint_show_dr, super_close): New variables.
7842 (super_fetch_registers, super_store_registers): Make static.
7843 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
7844 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
7845 (pt_watch_style): Define new enum.
7846 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
7848 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
7850 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
7851 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
7852 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
7853 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
7854 (type_to_irw, fill_mask, try_one_watch)
7855 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
7856 (mips_linux_new_thread, populate_regs_from_watches)
7857 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
7858 (mips_linux_close): New functions.
7859 (_initialize_mips_linux_nat): Register watchpoint functions with
7860 the target_ops. Add show-debug-regs maintenance command.
7862 2009-04-20 David Daney <ddaney@caviumnetworks.com>
7864 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
7866 2009-04-19 Pedro Alves <pedro@codesourcery.com>
7868 * NEWS: Mention gdbserver support for x86 Windows CE.
7870 2009-04-19 Eli Zaretskii <eliz@gnu.org>
7872 * config/djgpp/fnchange.lst: Fix typos.
7874 Set default host and target charsets in the DJGPP port.
7876 * config/djgpp/config.sed (am_cv_langinfo_codeset)
7877 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
7878 in all configure scripts that define ac_cv_env_CPP_value.
7880 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
7883 * config/djgpp/nl_types.h: New file.
7885 * config/djgpp/langinfo.h: New file.
7887 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
7889 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
7891 * Makefile.in (MAKEHTML): Set to makeinfo --html.
7892 (MAKEHTMLFLAGS): Set to empty.
7894 2009-04-18 Eli Zaretskii <eliz@gnu.org>
7896 * NEWS: Mention all new set/show commands added since GDB 6.8 was
7899 * go32-nat.c (go32_sysinfo): Check if the call to
7900 __dpmi_get_capabilities fills the buffer with information, and
7901 don't use the buffer if not.
7903 2009-04-17 Tom Tromey <tromey@redhat.com>
7905 * charset.c (_initialize_charset): Add special case for "646".
7907 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
7909 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
7910 * configure: Regenerate.
7911 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
7912 configure substitutions.
7913 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
7915 2009-04-17 Pierre Muller <muller@ics.u-strasbg.fr>
7917 ARI fix: Do not use %p, replace by call to host_address_to_string
7919 * darwin-nat.c (darwin_xfer_partial): Apply change.
7920 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
7921 * gnu-nat.h (proc_debug): Ditto.
7922 * symmisc.c (maintenance_info_symtabs): Ditto.
7923 (maintenance_info_psymtabs): Ditto.
7924 * windows-nat.c (handle_load_dll): Ditto.
7925 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
7926 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
7928 2009-04-17 Joseph Myers <joseph@codesourcery.com>
7930 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
7931 --enable-64-bit-bfd.
7932 (sparc-*-linux*): Likewise.
7934 2009-04-17 Eli Zaretskii <eliz@gnu.org>
7936 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
7939 2009-04-16 Pedro Alves <pedro@codesourcery.com>
7941 * remote.c (remote_query_attached): Fix pasto in packet_ok result
7944 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7946 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
7947 Revert the previous change. Might not be correct, actually.
7949 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7951 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
7952 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
7953 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
7954 Remove declaration. These are non-existent functions.
7956 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7958 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
7959 Fix a compilation warning on mips-irix due to casting from
7960 a pointer of different size.
7962 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7964 * ada-lang.c (symtab_for_sym): Delete.
7965 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
7967 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7969 * ada-lang.c (extract_string): Delete.
7970 (ada_main_name): Reimplement using target_read_string instead of
7973 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
7975 * m68klinux-nat.c: Remove obsolete comment.
7976 (fetch_register, store_register): Don't call
7977 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
7978 which are always nops here.
7980 2009-04-14 Tom Tromey <tromey@redhat.com>
7982 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
7983 (c_printstr): Likewise.
7984 * charset.c: Include gdb_wait.h.
7985 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
7986 (find_charset_names): Use pexecute. Handle libiconv's output.
7988 (_initialize_charset): Use xstrdup.
7989 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
7991 (INTERMEDIATE_ENCODING): New define.
7992 * configure, config.in: Rebuild.
7993 * configure.ac: Check for btowc.
7995 2009-04-15 Tom Tromey <tromey@redhat.com>
7997 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
7999 2009-04-15 Eli Zaretskii <eliz@gnu.org>
8001 * utils.c (parse_escape): Initialize target_char to pacify GCC.
8003 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8005 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
8007 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
8009 ARI fix: sprintf rule.
8010 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
8011 * ada-lang.c (add_angle_brackets): Use xstrprintf.
8012 (ada_decode): Replace sprintf by xsnprintf.
8013 (find_old_style_renaming_symbol): Ditto.
8014 (ada_to_fixed_type_1, ada_enum_name): Ditto.
8017 2009-04-14 Joel Brobecker <brobecker@adacore.com>
8019 * target.c (target_mourn_inferior): Call bfd_cache_close_all
8020 after having executed the target mourn_inferior routine.
8022 2009-04-14 Eli Zaretskii <eliz@gnu.org>
8024 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
8027 2009-04-13 David Daney <ddaney@caviumnetworks.com>
8029 * infrun.c (maybe_software_singlestep): New function.
8030 (resume): Call maybe_software_singlestep.
8031 (handle_inferior_event): Same.
8033 2009-04-13 Tom Tromey <tromey@redhat.com>
8035 * python/python-frame.c (frapy_richcompare): Return
8036 Py_NotImplemented, not an error. Handle Py_NE as well.
8038 2009-04-13 Eli Zaretskii <eliz@gnu.org>
8040 * charset.c (EILSEQ): Define if not defined by system headers.
8042 2009-04-11 Eli Zaretskii <eliz@gnu.org>
8044 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
8045 to be consistent with renaming config.intl.in into config_intl.in.
8047 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
8048 consistent with the change from 2008-11-09.
8050 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
8052 * gdbtypes.c: Remove excessive parentheses at the return keywords.
8053 * varobj.c (varobj_invalidate): Fix indentation.
8054 * varobj.c (varobj_invalidate): Fix formatting text width.
8056 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
8058 Implement -exec-jump.
8060 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
8061 * mi/mi-main.c (mi_cmd_exec_jump): New.
8062 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
8064 2009-04-07 Doug Evans <dje@google.com>
8066 * symfile.c (symbol_file_clear): Fix indentation.
8068 2009-04-06 Mark Kettenis <kettenis@gnu.org>
8070 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
8072 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
8074 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
8075 (ppc_linux_auxv_parse): New function.
8076 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
8077 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
8079 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
8081 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
8082 BFD to contents of SPU name note.
8083 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
8084 with "from_tty" argument 1 instead of 0.
8086 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
8089 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
8090 Create the symbol in local scope.
8091 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
8093 2009-04-02 Keith Seitz <keiths@redhat.com>
8095 * stabsread.c (read_member_functions): GCC may emit an extra space
8096 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
8097 whitespace when looking for these functions.
8099 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8101 Change the default value for "set print frame-arguments" to scalars.
8103 * stack.c (print_frame_arguments): Set initial value to "scalars".
8105 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
8107 * mips-tdep.c (mips_numeric_register_alieses): New definition.
8108 (mips_gdbarch_init): Add user registers from
8109 mips_numeric_register_aliases.
8111 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8113 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
8115 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8117 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
8118 this is the last one.
8120 2009-04-01 Pedro Alves <pedro@codesourcery.com>
8122 * remote.c (append_resumption): New.
8123 (remote_vcont_resume): Use it.
8125 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8127 * windows-nat.c (+windows_get_ada_task_ptid): New function.
8128 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
8130 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
8131 Keith Seitz <keiths@redhat.com>
8132 Jan Kratochvil <jan.kratochvil@redhat.com>
8135 * Makefile.in (dbxread.o): Update.
8136 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
8137 * dwarf2read.c (GDB_FORM_cached_string): New.
8138 (read_partial_die): Use dwarf2_canonicalize_name.
8139 (dwarf2_linkage_name): Use dwarf2_name.
8140 (dwarf2_canonicalize_name): New.
8141 (dwarf2_name): Use dwarf2_canonicalize_name.
8142 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
8143 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
8144 * symtab.c (lookup_symbol_in_language): Canonicalize input before
8146 * cp-name-parser.y: operator() requires two parameters,
8147 according to libiberty.
8148 * minsyms.c (lookup_minimal_symbol): Canonicalize input
8152 2009-03-31 Joel Brobecker <brobecker@adacore.com>
8154 Provide support for (Ada) task-specific breakpoints.
8156 * ada-lang.h (ada_get_task_number): Add declaration.
8157 (breakpoint_ada_task_match): Delete declaration.
8158 * ada-tasks.c (ada_get_task_number): Make non-static.
8159 * breakpoint.h (struct breakpoint): Add field "task".
8160 * breakpoint.c (print_one_breakpoint_location): Add handling of
8161 task-specific breakpoints.
8162 (create_breakpoint, create_breakpoints, find_condition_and_thread):
8163 New parameter "task".
8164 (break_command_really): Update calls to find_condition_and_thread
8165 and create_breakpoints.
8166 (breakpoint_re_set_one): Update call to find_condition_and_thread.
8169 2009-03-31 Joel Brobecker <brobecker@adacore.com>
8171 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
8173 2009-03-31 Pedro Alves <pedro@codesourcery.com>
8175 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
8176 if the thread's ptid without a thread id field is in the list
8177 before calling thread_change_ptid.
8178 (extended_remote_attach_1): In non-stop mode, do not rely on
8179 querying the current thread, instead, query the thread list, and
8180 select the first thread of the process.
8181 * gdbthread.h (first_thread_of_process): Declare.
8182 * thread.c (first_thread_of_process): Define.
8184 2009-03-30 Stan Shebs <stan@codesourcery.com>
8186 Make tracepoints into a type of breakpoint.
8187 * breakpoint.h (enum bptype): Add bp_tracepoint.
8188 (struct breakpoint): Add fields step_count, pass_count, actions.
8189 (get_tracepoint, get_tracepoint_by_number): Declare.
8190 (all_tracepoints): Declare.
8191 * breakpoint.c: Include tracepoint.h, readline.h.
8192 (ALL_TRACEPOINTS): Move here from tracepoint.c.
8193 (tracepoint_count): Ditto.
8194 (should_be_inserted): GDB does not insert tracepoints itself.
8195 (print_it_typical): Add tracepoint case.
8196 (bpstat_what): Ditto.
8197 (print_one_breakpoint_location): Ditto, and add printing for
8198 pass count, step count, and action list.
8199 (user_settable_breakpoint): Add tracepoint case.
8200 (allocate_bp_location): Ditto.
8201 (set_breakpoint_location_function): Ditto.
8202 (disable_breakpoints_in_shlibs): Ditto.
8204 (break_command_really): Add argument traceflag, use to choose
8205 basic breakpoint type.
8206 (break_command_1): Pass extra argument.
8207 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
8208 (breakpoint_re_set_one): Add tracepoint case.
8209 (disable_command, enable_command): Ditto.
8210 (set_tracepoint_count): Move here from tracepoint.c.
8211 (trace_command): Move here from tracepoint.c and use
8212 break_command_really.
8213 (tracepoints_info): Move here from tracepoint.c and call
8215 (enable_trace_command): Move here from tracepoint.c and call
8217 (disable_trace_command): Move here from tracepoint.c and call
8219 (delete_trace_command): Move here from tracepoint.c and call
8221 (trace_pass_command): Move here from tracepoint.c.
8222 (get_tracepoint_by_number): Ditto.
8223 (tracepoint_save_command): Ditto.
8224 (get_tracepoint): New function.
8225 (all_tracepoints): New function.
8226 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
8227 deprecate "enable trace" and "disable trace" commands.
8228 * tracepoint.h (struct tracepoint): Remove.
8229 (tracepoint_chain): Remove decl.
8230 (deprecated_create_tracepoint_hook): Remove decl.
8231 (deprecated_delete_tracepoint_hook): Remove decl.
8232 (deprecated_modify_tracepoint_hook): Remove decl.
8233 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
8234 (free_actions): Update signature.
8235 (validate_actionline): Update signature.
8236 (end_actions_pseudocommand): Declare.
8237 (while_stepping_pseudocommand): Declare.
8238 * tracepoint.c: Include breakpoint.h.
8239 (tracepoint_chain, tracepoint_count): Remove.
8240 (free_actions, make_cleanup_free_actions): Update signature.
8241 (trace_command, set_raw_tracepoint): Remove.
8242 (trace_mention): Remove.
8243 (tracepoints_info): Remove.
8244 (tracepoint_operation, map_args_over_tracepoints): Remove.
8245 (get_tracepoint_by_number): Remove.
8246 (enable_trace_command, disable_trace_command): Remove.
8247 (delete_trace_command, trace_pass_command): Remove.
8248 (trace_actions_command, read_actions): Update signature.
8249 (validate_actionline): Update signature, use bp loc.
8250 (encode_actions): Ditto.
8251 (download_tracepoint): New function, body of trace_start_command.
8252 (trace_start_command): Call it, use all_tracepoints.
8253 (tracepoint_save_command): Remove.
8254 (tracepoint_dump_command): Use get_tracepoint.
8255 (end_actions_pseudocommand): Make globally visible.
8256 (while_stepping_pseudocommand): Ditto.
8257 (_initialize_tracepoint): Move command definitions to breakpoint.c.
8259 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
8261 Expose frames to Python.
8262 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
8263 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
8264 (python-frame.o): New target.
8265 * python/python-frame.c: New file.
8266 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
8267 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
8268 gdbpy_initialize_frames): New prototypes.
8269 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
8270 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
8272 * stack.c (find_frame_funname): New function, factored out of
8274 (print_frame): Call find_frame_funname.
8275 * stack.h (find_frame_funname): Add prototype.
8277 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
8279 Remove unused value_object attribute `owned_by_gdb'.
8280 * python/python-value.c (value_object): Remove owned_by_gdb
8282 (valpy_dealloc): Remove reference to self->owned_by_gdb.
8283 (valpy_new): Likewise.
8284 (value_to_value_object): Likewise.
8286 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
8288 Change gdb.Value.address from a method to an attribute.
8289 * python/python-value.c (value_object): Add `address' element.
8290 (valpy_dealloc): Decrement reference to self->address if set.
8291 (valpy_new): Initialize val_obj->address.
8292 (valpy_address): Rename to ...
8293 (valpy_get_address): ... this. Change signature from method to
8294 attribute. Update self->address if not set.
8295 (value_to_value_object): Initialize val_obj->address.
8296 (value_object_getset): Add `address' element.
8297 (value_object_methods): Remove `address' element.
8299 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
8301 * observer.sh: Set LANG/LC_ALL to C, not c.
8303 2009-03-28 Kevin Buettner <kevinb@redhat.com>
8305 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
8308 2009-03-28 Pedro Alves <pedro@codesourcery.com>
8310 * remote.c (remote_stop_ns): If multi-process extensions are off,
8311 and GDB is requesting the whole process to stop, sent "vCont;t",
8314 2009-03-28 Pedro Alves <pedro@codesourcery.com>
8316 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
8319 2009-03-27 Eli Zaretskii <eliz@gnu.org>
8321 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
8323 2009-03-26 Doug Evans <dje@google.com>
8325 * thread.c (do_restore_current_thread_cleanup): Redo test for
8326 whether to restore old->inferior_ptid.
8328 2009-03-26 Tom Tromey <tromey@redhat.com>
8330 * breakpoint.c (resolve_sal_pc): Preserve original line number
8331 when skipping prologue.
8333 2009-03-26 Doug Evans <dje@google.com>
8335 * thread.c (inferior_thread) Remove "extern" in definition.
8337 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
8339 Add gdb.Value.is_optimized_out attribute.
8340 * python/python-value.c (valpy_get_is_optimized_out): New
8342 (value_object_getset): New variable.
8343 (value_object_type): Initialize tp_getset element.
8345 2009-03-26 Joel Brobecker <brobecker@adacore.com>
8347 Recognize missing DW_AT_location as <value optimized out>.
8349 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
8350 Call add_symbol_to_list.
8352 2009-03-25 Tom Tromey <tromey@redhat.com>
8354 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
8355 * stack.c (print_this_frame_argument_p): Use check_typedef.
8357 2009-03-25 Tom Tromey <tromey@redhat.com>
8359 * configure: Rebuild.
8360 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
8361 Rearrange flags setting. Add comments.
8363 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8365 * config/i386/nm-i386.h: Remove code within
8366 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
8367 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
8369 * config/i386/nm-cygwin64.h: Ditto.
8370 * config/i386/nm-fbsd.h: Ditto.
8371 * config/i386/nm-go32.h: Ditto.
8372 * config/i386/nm-linux.h: Ditto.
8373 * config/i386/nm-linux64.h: Ditto.
8375 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8377 ARI fix: "xasprintf" rule.
8378 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
8380 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8382 * remote.c (remote_start_remote): In non-stop mode, call
8383 init_wait_for_inferior before adding threads and inferiors.
8385 2009-03-25 Joel Brobecker <brobecker@adacore.com>
8387 * breakpoint.c (breakpoint_thread_match): Split a large condition
8388 into several smaller conditions. No behavior change.
8390 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8392 * infrun.c (infrun_thread_thread_exit): New.
8393 (_initialize_infrun): Attach it to the thread_exit observer.
8394 * thread.c (delete_thread_1): Always call the observer, passing it
8396 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
8397 SILENT, return immediately.
8399 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8401 * infrun.c (normal_stop): Use has_stack_frames instead of
8403 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
8404 when there is no thread selected.
8405 (mi_cmd_execute): Don't special case commands that can run without
8406 a valid selected thread.
8407 * top.c (execute_command): Don't special case commands that can
8408 run without a valid selected thread. Use has_stack_frames.
8409 * infcmd.c (ensure_valid_thread): New.
8410 (continue_1, step_1, jump_command, signal_command): Use it.
8411 (detach_command): Error out if there's no selected thread/inferior.
8412 * thread.c (print_thread_info): Allow having no thread selected.
8413 (switch_to_thread): Don't read the PC if there is no current thread.
8414 (do_restore_current_thread_cleanup): Don't record the current
8415 frame if there is no current thread.
8416 (make_cleanup_restore_current_thread): Don't read frame info if
8417 there is no selected thread.
8418 (_initialize_thread): Don't mark commands as
8419 "no_selected_thread_ok".
8420 * frame.c (get_current_frame): Error out if there is no valid
8422 (has_stack_frames): Return false if there is no valid
8424 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
8425 "no_selected_thread_ok".
8426 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
8427 (get_cmd_no_selected_thread_ok): Delete.
8428 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
8429 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
8431 * stack.c (get_selected_block): Use has_stack_frames.
8433 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
8435 Fix size of FPSCR in Power 7 processors.
8436 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
8437 (PPC_FEATURE_HAS_DFP): New #define.
8438 (ppc_linux_read_description): Check for DFP feature instead of
8439 ISA 2.05 to decide on size of the FPSCR.
8441 2009-03-25 Kevin Buettner <kevinb@redhat.com>
8443 * mn10300-tdep.c (trad-frame.h): Don't include.
8444 (prologue-value.h): Include.
8445 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
8446 (struct mn10300_prologue): Define.
8447 (push_reg, translate_rreg, check_for_saved): New functions.
8448 (mn10300_analyze_prologue): Rewrite, using prologue-value
8449 machinery. Handle more instructions than before. Permit
8450 instructions to occur in any order.
8451 (mn10300_skip_prologue): Find the extents of the function
8452 in question; mn10300_analyze_prologue no longer does this.
8453 (mn10300_analyze_frame_prologue): New function.
8454 (mn10300_frame_base): New function.
8455 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
8457 (mn10300_frame_prev_register): Likewise.
8458 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
8459 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
8461 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
8463 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8465 Fix completer problem for filename completion on the first try.
8467 * gdb/completer.h (gdb_completion_word_break_characters): New function.
8468 * gdb/completer.c: Include gdb_assert.h.
8469 (complete_line_internal_reason): New enum.
8470 (complete_line_internal): Change last argument type to
8471 complete_line_internal_reason.
8472 Modify function to handle the different complete_line_internal_reason
8474 (complete_line): Adapt to change in complete_line_internal.
8475 (command_completer): Ditto.
8476 (gdb_completion_word_break_characters): Implement new function.
8477 * top.c (init_main): Set rl_completion_word_break_hook to
8478 gdb_completion_word_break_characters.
8481 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8483 ARI fix: "strlen d_name" rule.
8484 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
8487 2009-03-24 Tom Tromey <tromey@redhat.com>
8488 Pedro Alves <pedro@codesourcery.com>
8490 * configure, config.in: Rebuild.
8491 * configure.ac: Check for libiconvlist.
8492 * charset.c: Check HAVE_LIBICONVLIST.
8493 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
8494 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
8495 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
8497 (INTERNAL_CFLAGS_BASE): Update.
8498 (INTERNAL_LDFLAGS): Update.
8501 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
8503 * configure.ac: Initialize the variable $PREFER_CURSES.
8504 * configure: Regenerated.
8506 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
8508 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
8509 * configure: Regenerated.
8511 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
8513 ARI fix: "strerror" rule.
8514 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
8515 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
8517 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8519 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
8520 before looking up the fields inside our struct type.
8522 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8524 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
8525 trying to resolve the type qualification.
8527 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8529 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
8530 we try to apply the attribute on the real type, rather than
8531 its associated typedef.
8533 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8535 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
8536 to make sure we try to get the modulus of the actual type, not the
8539 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8541 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
8542 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
8543 to get the real type, not the associated typedef.
8545 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8547 * ada-lang.c (ada_get_field_index): Add handling of the case
8548 when TYPE is a typedef of a struct.
8550 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8552 Add gdb_usleep as a portable version of usleep based on gdb_select.
8553 * gdb_usleep.h, gdb_usleep.c: New files.
8554 * Makefile.in (SFILES): Add gdb_usleep.c.
8555 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
8556 (COMMON_OBS): Add gdb_usleep.o.
8557 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
8558 by call to gdb_usleep.
8560 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8562 * buildsym.c (end_symtab): If we ignore the subfiles, then
8563 unlink the associated symtabs if they were already allocated.
8565 2009-03-23 Jerome Guitton <guitton@adacore.com>
8567 Provide a way to force building of GDB with libcurses.
8568 * configure.ac: Add --with-curses.
8569 * configure: Regenerated.
8571 2009-03-23 Tom Tromey <tromey@redhat.com>
8573 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
8576 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
8578 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
8579 solib_contains_address_p instead of searching.
8581 2009-03-23 Tom Tromey <tromey@redhat.com>
8583 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
8584 (iconv): Make 'inbuf' argument const.
8585 (convert_between_encodings): Use ICONV_CONST.
8586 (wchar_iterate): Likewise.
8588 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
8590 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
8591 dynamically loaded function.
8592 (LookupPrivilegeValueA): Ditto.
8593 (OpenProcessToken): Ditto.
8594 (AdjustTokenPrivileges): Rename and define placeholder for address of
8595 dynamically loaded function.
8596 (LookupPrivilegeValueA): Ditto.
8597 (OpenProcessToken): Ditto.
8598 (set_process_privilege): Remove check for loaded functions.
8599 (bad_OpenProcessToken): Define.
8600 (_initialize_loadable): Load token functions from advapi here, setting
8601 OpenProcessToken function to a dummy static function which always return
8602 error if OS doesn't support this functionality.
8604 2009-03-22 Nicolas Roche <roche@adacore.com>
8605 Christopher Faylor <me+cygwin@cgf.cx>
8607 * win32-nat.c (ctrl_c_handler): New function.
8608 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
8609 is run in a separate console.
8611 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
8613 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
8614 for dynamically loaded function.
8615 (DebugBreakProcess): Ditto.
8616 (DebugSetProcessKillOnExit): Ditto.
8617 (EnumProcessModules): Ditto.
8618 (GetModuleFileNameExA): Ditto.
8619 (GetModuleInformation): Ditto.
8620 (DebugActiveProcessStop): Rename and define placeholder for address of
8621 dynamically loaded function.
8622 (DebugBreakProcess): Ditto.
8623 (DebugSetProcessKillOnExit): Ditto.
8624 (EnumProcessModules): Ditto.
8625 (GetModuleFileNameExA): Ditto.
8626 (GetModuleInformation): Ditto.
8627 (psapi_loaded): Delete.
8628 (get_module_name): Don't check psapi_loaded, just rely on the fact that
8629 dynamically loaded functions will return failure if they weren't
8631 (has_detach_ability): Delete.
8632 (windows_attach): Remove call to has_detach_ability (). Just rely on
8633 functions being callable.
8634 (bad_DebugActiveProcessStop): Define.
8635 (bad_DebugBreakProcess): Ditto.
8636 (bad_DebugSetProcessKillOnExit): Ditto.
8637 (bad_EnumProcessModules): Ditto.
8638 (bad_GetModuleFileNameExA): Ditto.
8639 (bad_GetModuleInformation): Ditto.
8640 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
8641 dynamic storage here, setting nonexistent functions to dummy static
8642 functions which always return error.
8644 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8646 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
8647 to the about_to_proceed observer notification.
8648 (mi_about_to_proceed): New.
8649 (mi_on_resume): Only output ^running and the prompt here if the
8650 target was proceeded.
8651 * breakpoint.c (breakpoint_proceeded): New static.
8652 (breakpoint_about_to_proceed): New.
8653 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
8654 the about_to_proceed observer notification.
8655 * inferior.h (breakpoint_proceeded): Delete declaration.
8656 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
8657 Notify the about_to_proceed observers.
8658 (struct inferior_status): Delete breakpoint_proceeded member.
8659 (save_inferior_status): Don't save it.
8660 (restore_inferior_status): Don't restore it.
8661 * mi-main.h (mi_proceeded): Declare.
8662 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
8665 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8667 * gdbthread.h (struct thread_info): Add in_infcall member.
8668 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
8669 Remove reverences to suppress_resume_observer. Refresh
8670 `call_thread' after returning from `proceed'.
8671 * infcmd.c (suppress_resume_observer): Delete.
8672 * inferior.h (suppress_resume_observer): Delete declaration.
8673 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
8675 * thread.c (set_running): Remove references to
8676 suppress_resume_observer.
8677 * infrun.c (struct inferior_status): Add in_infcall member.
8678 (save_inferior_status): Save it.
8679 (restore_inferior_status): Restore it.
8681 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8683 * infcall.c (run_inferior_call): Remove references to
8684 suppress_stop_observer.
8685 * infcmd.c (suppress_stop_observer): Delete.
8686 (finish_command_continuation): Remove NOTE. Don't clear
8687 suppress_stop_observer anymore.
8688 (finish_command_continuation_free_arg): Likewise.
8689 (finish_forward): Remove references to suppress_stop_observer.
8690 Call normal_stop observer if we haven't already.
8691 * inferior.h (suppress_stop_observer): Delete.
8692 * infrun.c (normal_stop): When deciding to suppress the
8693 normal_stop observer, check for proceed_to_finish instead of
8694 suppress_stop_observer.
8696 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8698 * symfile.c (symfile_relocate_debug_section): Remove check for
8701 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
8702 Jim Blandy <jimb@red-bean.com>
8703 Thiago Jung Bauermann <bauerman@br.ibm.com>
8704 Tom Tromey <tromey@redhat.com>
8706 Miscellaneous fixes to the Python code.
8707 * python/python-cmd.c (cmdpy_init): Accept keyword
8709 * python/python-value.c (valpy_string): Accept keyword
8711 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
8712 Do not call value_to_value_object on NULL RES_VAL.
8713 (value_object_methods): Change `string' entry to also accept
8715 (convert_value_from_python): Return a copy of the value if obj is
8717 (value_object_methods): Mark the `string' method as accepting
8718 keywords, and show method "prototype" in the doc string.
8719 * python/python.c (get_parameter): Don't return inside a
8722 2009-03-20 Tom Tromey <tromey@redhat.com>
8724 Add support for convenience functions in Python.
8725 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
8726 (SUBDIR_PYTHON_SRCS): Add python-function.c.
8727 (python-function.o): New target.
8728 * eval.c: Include "python/python.h" and <ctype.h>.
8729 (evaluate_subexp_standard): Handle values of type
8730 TYPE_CODE_INTERNAL_FUNCTION.
8731 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
8732 * parse.c (write_exp_string): Remove duplicate word in comment.
8733 * python/python-function.c: New file.
8734 * python/python-internal.h (gdbpy_initialize_functions): Add
8736 * python/python.c (_initialize_python): Call
8737 gdbpy_initialize_functions.
8738 * valprint.c (value_check_printable): Handle values of type
8739 TYPE_CODE_INTERNAL_FUNCTION.
8740 * value.c: Include "cli/cli-decode.h".
8741 (internal_function): New struct.
8742 (functionlist, internal_fn_type): New static variables.
8743 (lookup_only_internalvar,
8744 lookup_internalvar): Add const qualifier to name argument.
8745 (create_internalvar): Likewise. Initialize new field.
8746 (set_internal_var): Fix typo in comment. Don't allow assignment
8747 to canonical variable.
8748 (value_create_internal_function, value_internal_function_name,
8749 call_internal_function, function_command, function_destroyer,
8750 add_internal_function): New functions.
8751 (_initialize_values): Create `function' placeholder command.
8752 Initialize internal_fn_type.
8753 * value.h (lookup_only_internalvar, create_internalvar,
8754 lookup_internalvar): Add const qualifier to name argument.
8755 (internal_function_fn, add_internal_function, call_internal_function,
8756 value_internal_function_name): Add prototypes.
8757 (struct internalvar) <canonical>: New field.
8759 2009-03-20 Tom Tromey <tromey@redhat.com>
8761 * c-lang.c (evaluate_subexp_c): Call check_typedef.
8763 2009-03-20 Tom Tromey <tromey@redhat.com>
8764 Julian Brown <julian@codesourcery.com>
8766 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
8767 PR i18n/9401, PR exp/9613:
8769 * value.h (value_typed_string): Declare.
8770 (val_print_string): Update.
8771 * valprint.h (print_char_chars): Update.
8772 * valprint.c (print_char_chars): Add type argument. Update.
8773 (val_print_string): Likewise.
8774 * valops.c (value_typed_string): New function.
8775 * utils.c (host_char_to_target): New function.
8776 (parse_escape): Use host_char_to_target, host_hex_value. Update.
8778 (no_control_char_error): Remove.
8779 * typeprint.c (print_type_scalar): Update.
8780 * scm-valprint.c (scm_scmval_print): Update.
8781 * scm-lang.h (scm_printchar, scm_printstr): Update.
8782 * scm-lang.c (scm_printchar): Add type argument.
8783 (scm_printstr): Likewise.
8784 * printcmd.c (print_formatted): Update.
8785 (print_scalar_formatted): Update.
8786 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
8787 Handle '%lc' and '%ls'.
8788 * parser-defs.h (struct typed_stoken): New type.
8789 (struct stoken_vector): Likewise.
8790 (write_exp_string_vector): Declare.
8791 * parse.c (write_exp_string_vector): New function.
8792 * p-valprint.c (pascal_val_print): Update.
8793 * p-lang.h (is_pascal_string_type, pascal_printchar,
8794 pascal_printstr): Update.
8795 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
8796 Add 'char_type' argument.
8797 (pascal_emit_char): Add type argument.
8798 (pascal_printchar): Likewise.
8799 (pascal_printstr): Likewise.
8800 * objc-lang.c (objc_emit_char): Add type argument.
8801 (objc_printchar): Likewise.
8802 (objc_printstr): Likewise.
8803 * macroexp.c (get_character_constant): Handle unicode characters.
8805 (get_string_literal): Handle unicode strings. Use
8807 * m2-valprint.c (print_unpacked_pointer): Update.
8808 (m2_print_array_contents): Update.
8809 (m2_val_print): Update.
8810 * m2-lang.c (m2_emit_char): Add type argument.
8811 (m2_printchar): Likewise.
8812 (m2_printstr): Likewise.
8813 * language.h (struct language_defn) <la_printchar>: Add type
8815 <la_printstr, la_emitchar>: Likewise.
8816 (LA_PRINT_CHAR): Likewise.
8817 (LA_PRINT_STRING): Likewise.
8818 (LA_EMIT_CHAR): Likewise.
8819 * language.c (unk_lang_emit_char): Add type argument.
8820 (unk_lang_printchar): Likewise.
8821 (unk_lang_printstr): Likewise.
8822 * jv-valprint.c (java_val_print): Update.
8823 * jv-lang.c (java_emit_char): Add type argument.
8824 * f-valprint.c (f_val_print): Update.
8825 * f-lang.c (f_emit_char): Add type argument.
8826 (f_printchar): Likewise.
8827 (f_printstr): Likewise.
8828 * expprint.c (print_subexp_standard): Update.
8829 * charset.h (target_wide_charset): Declare.
8830 (c_target_char_has_backslash_escape, c_parse_backslash,
8831 host_char_print_literally, host_char_to_target,
8832 target_char_to_host, target_char_to_control_char): Remove.
8833 (enum transliterations): New type.
8834 (convert_between_encodings): Declare.
8835 (HOST_ESCAPE_CHAR): New define.
8836 (host_letter_to_control_character, host_hex_value): Declare.
8837 (enum wchar_iterate_result): New enum.
8838 (struct wchar_iterator): Declare.
8839 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
8840 wchar_push_back): Declare.
8841 * charset-list.h: New file.
8842 * c-valprint.c (textual_name): New function.
8843 (textual_element_type): Handle wide character types.
8844 (c_val_print): Pass original type to textual_element_type. Handle
8845 wide character types.
8846 (c_value_print): Use textual_element_type. Pass original type of
8848 * c-lang.h (enum c_string_type): New type.
8849 (c_printchar, c_printstr): Update.
8850 * c-lang.c (classify_type): New function.
8851 (print_wchar): Likewise.
8852 (c_emit_char): Add type argument. Handle wide characters.
8853 (c_printchar): Likewise.
8854 (c_printstr): Add type argument. Handle wide and multibyte
8856 (convert_ucn): New function.
8857 (emit_numeric_character): Likewise.
8858 (convert_octal): Likewise.
8859 (convert_hex): Likewise.
8860 (ADVANCE): New macro.
8861 (convert_escape): New function.
8862 (parse_one_string): Likewise.
8863 (evaluate_subexp_c): Likewise.
8864 (exp_descriptor_c): New global.
8865 (c_language_defn): Use exp_descriptor_c.
8866 (cplus_language_defn): Likewise.
8867 (asm_language_defn): Likewise.
8868 (minimal_language_defn): Likewise.
8869 (charset_for_string_type): New function.
8870 * c-exp.y (%union): Add 'svec' and 'tsval'.
8872 (exp): Add CHAR production.
8873 (string_exp): Rewrite.
8874 (exp) <string_exp>: Rewrite.
8875 (tempbuf): Now global.
8876 (tempbuf_init): New global.
8877 (parse_string_or_char): New function.
8878 (yylex) <tempbuf>: Now global.
8879 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
8881 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
8882 (c_parse_escape): New function.
8883 * auxv.c (fprint_target_auxv): Update.
8884 * ada-valprint.c (ada_emit_char): Add type argument.
8885 (ada_printchar): Likewise.
8886 (ada_print_scalar): Update.
8887 (printstr): Add type argument. Update calls to ada_emit_char.
8888 (ada_printstr): Add type argument.
8889 (ada_val_print_array): Update.
8890 (ada_val_print_1): Likewise.
8891 * ada-lang.c (emit_char): Add type argument.
8892 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
8894 * gdb_locale.h: Include langinfo.h.
8895 * charset.c (_initialize_charset): Set default host charset from
8896 the locale. Don't register charsets. Add target-wide-charset
8897 commands. Call find_charset_names.
8898 (struct charset, struct translation): Remove.
8899 (GDB_DEFAULT_HOST_CHARSET): Remove.
8900 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
8901 (target_wide_charset_name): New global.
8902 (show_host_charset_name): Handle "auto".
8903 (show_target_wide_charset_name): New function.
8904 (host_charset_enum, target_charset_enum): Remove.
8905 (charset_enum): New global.
8906 (all_charsets, register_charset, lookup_charset, all_translations,
8907 register_translation, lookup_translation): Remove.
8908 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
8909 (iso_8859_print_literally, iso_8859_to_control,
8910 iso_8859_family_charset): Remove.
8911 (ebcdic_print_literally, ebcdic_to_control,
8912 ebcdic_family_charset): Remove.
8913 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
8914 register_iconv_charsets): Remove.
8915 (target_wide_charset_be_name, target_wide_charset_le_name): New
8917 (identity_either_char_to_other): Remove.
8918 (set_be_le_names, validate): New functions.
8919 (backslashable, backslashed, represented): Remove.
8920 (default_c_target_char_has_backslash_escape): Remove.
8921 (default_c_parse_backslash, iconv_convert): Remove.
8922 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
8923 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
8924 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
8925 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
8926 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
8927 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
8928 (table_convert_char, table_translation, simple_table_translation):
8930 (current_host_charset, current_target_charset,
8931 c_target_char_has_backslash_escape_func,
8932 c_target_char_has_backslash_escape_baton): Remove.
8933 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
8934 (host_char_to_target_func, host_char_to_target_baton): Remove.
8935 (target_char_to_host_func, target_char_to_host_baton): Remove.
8936 (cached_iconv_host_to_target, cached_iconv_target_to_host):
8938 (lookup_charset_or_error, check_valid_host_charset): Remove.
8939 (set_host_and_target_charsets): Remove.
8940 (set_host_charset, set_target_charset): Remove.
8941 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
8942 (set_target_wide_charset_sfunc): New function.
8943 (show_charset): Print target wide character set.
8944 (host_charset, target_charset): Rewrite.
8945 (target_wide_charset): New function.
8946 (c_target_char_has_backslash_escape): Remove.
8947 (c_parse_backslash): Remove.
8948 (host_letter_to_control_character): New function.
8949 (host_char_print_literally): Remove.
8950 (host_hex_value): New function.
8951 (target_char_to_control_char): Remove.
8952 (cleanup_iconv): New function.
8953 (convert_between_encodings): New function.
8954 (target_char_to_host): Remove.
8955 (struct wchar_iterator): Define.
8956 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
8957 wchar_push_back): New functions.
8958 (do_cleanup_iterator): New function.
8959 (char_ptr): New typedef.
8960 (charsets): New global.
8961 (add_one, find_charset_names): New functions.
8962 (default_charset_names): New global.
8963 (auto_host_charset_name): Likewise.
8964 * aclocal.m4, config.in, configure: Rebuild.
8965 * configure.ac: Call AM_LANGINFO_CODESET.
8966 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
8967 (AM_ICONV): Invoke earlier.
8968 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
8969 LIBICONV_LIBDIR. Check for libiconv in build tree.
8970 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
8971 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
8972 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
8973 * gdb_obstack.h (obstack_grow_wstr): New define.
8974 * gdb_wchar.h: New file.
8975 * defs.h: Include it.
8977 2009-03-20 Tom Tromey <tromey@redhat.com>
8978 Jan Kratochvil <jan.kratochvil@redhat.com>
8980 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
8981 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
8983 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
8985 * ada-typeprint.c (print_array_type): Do the NULL check
8988 2009-03-19 Tom Tromey <tromey@redhat.com>
8990 * utils.c (do_obstack_free): New function.
8991 (make_cleanup_obstack_free): Likewise.
8992 * defs.h (make_cleanup_obstack_free): Declare.
8994 2009-03-18 Doug Evans <dje@google.com>
8996 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
8997 int, not a long long.
8998 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
9000 * expprint.c (dump_raw_expression): Print note if non-NULL.
9002 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
9005 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
9007 * Makefile.in: Update license to GPLv3.
9008 * ada-exp.y: Update license to GPLv3.
9009 * ada-lex.l: Update license to GPLv3.
9010 * c-exp.y: Update license to GPLv3.
9011 * cp-name-parser.y: Update license to GPLv3.
9012 * darwin-nat-info.c: Update license to GPLv3.
9013 * f-exp.y: Update license to GPLv3.
9014 * gdb_thread_db.h: Update license to GPLv3.
9015 * hppanbsd-nat.c: Update license to GPLv3.
9016 * hppanbsd-tdep.c: Update license to GPLv3.
9017 * hppaobsd-tdep.c: Update license to GPLv3.
9018 * jv-exp.y: Update license to GPLv3.
9019 * m2-exp.y: Update license to GPLv3.
9020 * objc-exp.y: Update license to GPLv3.
9021 * p-exp.y: Update license to GPLv3.
9022 * reply_mig_hack.awk: Update license to GPLv3.
9023 * reverse.c: Update license to GPLv3.
9024 * xtensa-xtregs.c: Update license to GPLv3.
9026 2009-03-18 Pedro Alves <pedro@codesourcery.com>
9028 * remote.c (remote_close): Don't call generic_mourn_inferior.
9029 (remote_mourn_1): Call generic_mourn_inferior after closing the
9032 2009-03-18 Pedro Alves <pedro@codesourcery.com>
9034 * remote.c (remote_start_remote): Add missing call to
9035 init_wait_for_inferior in non-stop mode.
9037 2009-03-18 Pedro Alves <pedro@codesourcery.com>
9039 * breakpoint.c (bpstat_should_step): Only consider software
9040 watchpoints that have a location.
9042 2009-03-17 Joel Brobecker <brobecker@adacore.com>
9044 Add a target_ops parameter to the to_kill method in struct target_ops.
9046 * target.h (struct target_ops): Add a "target_ops *" parameter to
9048 (target_kill): Remove macro. Add declaration.
9049 * target.c (debug_to_kill): Delete, no longer necessary.
9050 (target_kill): New function.
9051 (update_current_target): Stop inheriting the to_kill method.
9052 Do not de_fault it to no_process either.
9053 (setup_target_debug): Do not set current_target.to_kill.
9054 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
9055 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
9056 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
9059 2009-03-17 Doug Evans <dje@google.com>
9061 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
9062 glibc 2.3.2 and earlier.
9064 2009-03-17 Joel Brobecker <brobecker@adacore.com>
9066 * frame.c (get_prev_frame_1): Do not perform the inner_frame
9067 sanity check if this_frame is not NORMAL.
9068 (frame_id_inner): Update the description of this function.
9070 2009-03-17 Hui Zhu <teawater@gmail.com>
9072 * stack.c: Change the introduce of "disassemble-next-line".
9074 2009-03-17 Pedro Alves <pedro@codesourcery.com>
9076 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
9079 2009-03-17 Hui Zhu <teawater@gmail.com>
9081 * stack.c: Include valprint.h.
9082 (disassemble_next_line): New enum.
9083 (show_disassemble_next_line): New function. Show the current
9084 value of disassemble-next-line.
9085 (gdb_disassembly_stub_args): New struct for argument passing
9086 between function do_gdb_disassembly and function
9087 gdb_disassembly_stub.
9088 (gdb_disassembly_stub): New function. Helper for
9090 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
9091 the exception from the gdb_disassembly because it will be
9092 broken by filter sometime.
9093 (print_frame_info): If disassemble-next-line is set to auto
9094 or on and doesn't have the line debug messages for $pc,
9095 output the next instruction.
9096 If disassemble-next-line is set to on and there is line debug
9097 messages, output assembly codes for next line.
9098 (_initialize_stack): Make the "set disassemble-next-line"
9099 command an auto-boolean command. Change its class to
9100 class_stack. Place it in the top level set list. Extend help
9101 to describe the auto mode.
9103 2009-03-17 Pedro Alves <pedro@codesourcery.com>
9105 * infrun.c (normal_stop): Don't overwrite old_chain.
9107 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9109 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
9110 which is undefined, by call to regcache_invalidate, which should
9111 do what the original author wanted to do.
9113 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9115 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
9116 (mips_create_inferior): Likewise.
9118 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9120 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
9122 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9124 * darwin-nat.c (darwin_resume): Fix a compiler warning when
9125 building on x86_64-darwin.
9127 2009-03-16 Tristan Gingold <gingold@adacore.com>
9129 * configure.tgt: Add handling for x86_64-darwin.
9131 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
9133 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
9135 2009-03-15 Joel Brobecker <brobecker@adacore.com>
9137 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
9138 Use the ops parameter to get to the target beneath, rather than
9139 using the current_target global. Using the current_target global
9140 was an unintended accident.
9142 2009-03-15 Joel Brobecker <brobecker@adacore.com>
9144 Fix an error happening while loading symbols from a core file
9147 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
9148 to detect whether we're debugging a core file or not.
9150 2009-03-15 Joel Brobecker <brobecker@adacore.com>
9152 Modernize the aix-thread later by getting rid of the base_target
9153 global. This brings back to life the AIX port which was otherwise
9154 crashing all the time.
9156 * aix-thread.c (base_target): Delete.
9157 (pd_enable): Do not set base_target.
9158 (aix_thread_attach): Use find_target_beneath instead of base_target.
9159 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
9160 (aix_thread_fetch_registers, aix_thread_store_registers),
9161 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
9162 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
9163 (aix_thread_kill): Delete. Does not seem necessary.
9164 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
9166 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
9168 * stack.c (return_command <retval_exp>): New variables retval_expr
9169 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
9170 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
9171 if RETURN_TYPE is NULL.
9173 2009-03-14 Pedro Alves <pedro@codesourcery.com>
9175 * remote.c (PACKET_qAttached): New.
9176 (remote_query_attached): New.
9177 (remote_add_inferior): Add new `attached' argument. Handle it.
9178 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
9179 -1 to remote_add_inferior in new parameter.
9180 (extended_remote_attach_1): Adjust to pass 1 to
9181 remote_add_inferior in the new parameter.
9182 (extended_remote_create_inferior_1): Adjust to pass 0 to
9183 remote_add_inferior in the new parameter.
9184 (_initialize_remote): Add "set/show remote query-attached-packet"
9187 2009-03-13 Tom Tromey <tromey@redhat.com>
9189 * symtab.c (lookup_symbol_in_language): Use a cleanup.
9191 2009-03-13 Doug Evans <dje@google.com>
9193 * exceptions.h: Clean up some comments on catch_exceptions usage.
9194 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
9197 2009-02-17 Joel Brobecker <brobecker@adacore.com>
9199 The following patch helps getting rid of a warning inside solib-som.c.
9201 * source.c (source_full_path_of): Constify parameter filename.
9202 * defs.h (source_full_path_of): Update declaration accordingly.
9204 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9206 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
9207 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
9208 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
9210 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9212 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
9213 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
9215 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9217 * ada-tasks.c (ada_task_is_alive): Move up and make static.
9218 * ada-lang.h (ada_task_is_alive): Remove declaration.
9220 2009-03-12 Jerome Guitton <guitton@adacore.com>
9222 * ada-lang.c (ada_delta): Change the type of numerators and
9223 denominators to DOUBLEST, as they may not fit into a long.
9224 (scaling_factor): Ditto.
9226 2009-03-12 Jerome Guitton <guitton@adacore.com>
9228 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
9230 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9232 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
9233 types, if we are unable to determine the actual symbol type
9234 from its tag, then use the static approximation instead.
9236 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9238 Fix crash printing packed record with packed array.
9240 * ada-lang.c (ada_modulus_from_name): New function.
9241 (ada_modulus): In the case where the type length is bigger than
9242 the size of the type used to hold the bounds, try determining
9243 the modulus from the type name.
9244 (ada_value_primitive_packed_val): Fix bug in the computation of
9245 ntarg causing an out-of-buffer invalid access.
9247 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9249 Fix segfault when printing short_integer'last.
9251 * ada-lang.c (ada_find_any_type): Search in the primitive types
9252 if a symbol could not be found.
9254 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9256 * ada-tasks.c (task_states,long_task_states): Add new states
9257 Activating and Acceptor_Delay_Sleep. Update the description
9258 of state Acceptor_Sleep.
9260 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
9262 Fix a build failure on Darwin following some changes in
9263 the profile of some target_ops methods.
9265 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
9267 (darwin_stop_inferior, darwin_detach): Likewise.
9269 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
9271 Include token in ^running notification for CLI commands.
9273 * mi/mi-main.c (mi_execute_command): Set current_token here.
9274 (mi_cmd_execute): Do not set current_token here.
9276 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
9280 * mi/mi-main.c (mi_print_timing_maybe): New.
9281 (captured_mi_execute_command): Simplify. Output timings to
9283 (mi_execute_async_cli_command): Do not print timings.
9284 * mi/mi-main.h (mi_print_timing_maybe): Declare.
9285 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
9287 2009-03-12 Jerome Guitton <guitton@adacore.com>
9289 * xcoffread.c (process_linenos): Check if the line in the
9290 include table refers to the main source file and, if so,
9291 add them to the main subfile.
9293 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9295 Fix a build failure on AIX introduced after a change in the profile
9296 of some of the "methods" in the target_ops structure.
9297 * aix-thread.c: Add missing target_ops parameter throughout.
9299 Implement Ada task switching on AIX.
9300 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
9301 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
9303 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
9305 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
9306 value_mark and value_free_to_mark.
9307 * objfiles.c (free_objfile): Call objfile_free_data before
9310 2009-03-10 Hui Zhu <teawater@gmail.com>
9312 * disasm.c (gdb_disassembly): Remove unused argument
9314 * disasm.h (gdb_disassembly): Ditto.
9315 * cli/cli-cmds.c (print_disassembly): Ditto.
9316 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
9318 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
9320 * solib.c (solib_contains_address_p): New function.
9321 (solib_name_from_address): Use it.
9322 * printcmd.c (display_uses_solib_p): Use it.
9323 * solib.h (solib_contains_address_p): Declare it.
9325 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
9327 * varobj.c (free_variable): Call value_free.
9329 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
9332 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
9333 Move the variable `macinfo_type' out of the loop. Create a new
9334 processing pass before the current one to pre-create `current_file'.
9335 New complaint on misplaced zero/non-zero definitions/includes.
9336 Skip first DW_MACINFO_start_file with `at_commandline' set.
9338 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
9340 * solib.c (reload_shared_libraries): Give
9341 inferior a chance to reset solib breakpoint.
9344 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
9346 * windows-nat.c (dr): Redefine to use largest possible integer which
9348 (cygwin_set_dr): Avoid coercion.
9350 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
9352 * windows-nat.c (windows_create_inferior): Implement --tty handling on
9355 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
9357 Rename solib_address to solib_name_from_address.
9358 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
9359 (disable_breakpoints_in_unloaded_shlib): Update.
9360 * printcmd.c (display_uses_solib_p): Likewise.
9361 * stack.c (print_frame): Likewise.
9365 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
9367 * printcmd.c (do_one_display): Reparse exp_string.
9368 (display_uses_solib_p): New function.
9369 (clear_dangling_display_expressions): New function.
9370 (_initialize_printcmd): Add observer.
9371 * solib.c (no_shared_libraries): Swap order of calls to
9372 clear_solib and objfile_purge_solibs.
9374 2009-03-05 Joel Brobecker <brobecker@adacore.com>
9376 Implement the target-specific part of Ada tasking support
9379 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
9380 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
9382 2009-03-05 Joel Brobecker <brobecker@adacore.com>
9384 Get rid of the global "base_target" and use "find_target_beneath"
9385 to find the underlying target.
9386 * dec-thread.c (base_target): Delete.
9387 (enable_dec_thread): Remove assignement to base_target.
9388 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
9389 (dec_thread_fetch_registers, dec_thread_store_registers)
9390 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
9391 Update the function profile if necessary.
9392 Use find_target_beneath to call the same method but from
9393 the underlying target, removing the need for "base_target".
9395 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
9396 Fix a copy/paste error in a few debug traces...
9398 * solib-osf.c (init_so): Use a simpler method for computing
9399 the size of lm_info structure. This also gets rid of warning
9400 emitted by the compiler.
9402 2009-03-05 Pedro Alves <pedro@codesourcery.com>
9404 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
9405 duplicates of permanent breakpoints.
9407 2009-03-04 Pedro Alves <pedro@codesourcery.com>
9409 * inferior.h (notice_new_inferior): Declare.
9410 * infcmd.c (notice_new_inferior): New.
9411 * remote.c (remote_add_inferior, remote_add_thread): New.
9412 (notice_new_inferiors): Rename to...
9413 (remote_notice_new_inferior): ... this. Add RUNNING argument.
9414 Use remote_add_thread instead of add_thread, passing it the
9415 RUNNING argument. Add an inferior with remote_add_inferior. If
9416 we just learned about an inferior, call notice_new_inferior.
9417 (record_currthread): Adjust.
9418 (remote_threads_info): Adjust to use remote_notice_new_inferior.
9419 (remote_start_remote, extended_remote_attach_1): Use
9420 remote_add_inferior.
9421 (process_stop_reply): Adjust. Call remote_notice_new_inferior
9422 after handling expedited registers and watchpoint state.
9423 (extended_remote_create_inferior_1): Use remote_add_inferior.
9425 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
9427 * infcmd.c (registers_info): Remove register number case.
9429 2009-03-03 Pedro Alves <pedro@codesourcery.com>
9431 * top.c (quit_target): Check for target_has_execution before
9432 killing or detaching from inferiors.
9434 2009-03-02 Joel Brobecker <brobecker@adacore.com>
9436 Remove some unused routines.
9438 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
9440 * ada-lang.c (ada_task_list_iterator_ftype)
9441 (iterate_over_live_ada_tasks): Delete.
9442 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
9445 2009-03-01 Doug Evans <dje@google.com>
9447 * symtab.c: Remove trailing whitespace throughout the file.
9448 (expand_line_sal): Fix some typos and whitespace.
9450 * Makefile.in (clean): rm -f $(DEPDIR)/*.
9452 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
9453 (init.c): signals/ -> common/.
9454 (signals.o): Update.
9455 * target.h (target_signal_to_string,target_signal_to_string)
9456 (target_signal_from_name,target_signal_to_host_p)
9457 (target_signal_from_host,target_signal_to_host): Move to ...
9458 * common/gdb_signals.h: ... here. New file.
9459 * common/signals.c: Moved here from signals/signals.c.
9460 #include gdb_signals.h, remove #include of target.h in gdb case.
9461 (target_signal_from_command,default_target_signal_to_host)
9462 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
9464 Include thread ID in target_wait debugging output.
9465 * infrun.c (print_target_wait_results): New function.
9466 (wait_for_inferior,fetch_inferior_event): Call it.
9468 2009-02-27 Pedro Alves <pedro@codesourcery.com>
9470 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
9471 with a ptid_t field.
9472 * linux-thread-db.c (thread_get_info_callback): Build the ptid
9473 using the pid stored in proc_handle.ptid.
9474 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
9475 (check_for_thread_db, thread_db_detach, check_event)
9476 (thread_db_mourn_inferior, find_new_threads_callback)
9477 (thread_db_find_new_threads_1): Adjust.
9478 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
9479 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
9481 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
9483 * valprint.c (read_string): Rework clean-up logic. Use
9484 free_current_contents to clean-up buffer.
9486 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
9488 * MAINTAINERS: Update e-mail address.
9490 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
9492 * python/python-utils.c (python_string_to_unicode): Always return
9494 (python_string_to_target_string): Decrement transient python
9496 (python_string_to_host_string): Likewise.
9498 2007-02-26 Pedro Alves <pedro@codesourcery.com>
9500 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
9501 call to super_fetch_registers.
9502 (mips64_linux_store_registers): Pass `ops' to call to
9503 super_store_registers.
9505 2009-02-25 Doug Evans <dje@google.com>
9507 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
9510 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
9511 disabled_shlib_breaks, unused.
9513 * printcmd.c (build_address_symbolic): Fix comment.
9515 2009-02-25 Hui Zhu <teawater@gmail.com>
9517 * cli/cli-script.c (define_command): Add _() to query.
9518 * gnu-nat.c (inf_validate_task_sc): Ditto.
9519 * infcmd.c (kill_if_already_running): Ditto.
9520 (jump_command): Ditto.
9521 (attach_command): Ditto.
9522 * inflow.c (kill_command): Ditto.
9523 * infrun.c (handle_command): Ditto.
9524 * maint.c (maintenance_dump_me): Ditto.
9525 * memattr.c (mem_delete_command): Ditto.
9526 * monitor.c (monitor_interrupt_query): Ditto.
9527 * nto-procfs.c (interrupt_query): Ditto.
9528 * printcmd.c (undisplay_command): Ditto.
9529 * remote-mips.c (mips_kill): Ditto.
9530 * remote.c (interrupt_query): Ditto.
9531 * solib-irix.c (irix_open_symbol_file_object): Ditto.
9532 * solib-osf.c (osf_open_symbol_file_object): Ditto.
9533 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
9534 * solib-som.c (som_open_symbol_file_object): Ditto.
9535 * solib-svr4.c (open_symbol_file_object): Ditto.
9536 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
9537 * target.c (kill_or_be_killed): Ditto.
9538 * tracepoint.c (delete_trace_command): Ditto.
9539 * top.c (quit_confirm): Add _() to s that will be used
9542 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
9544 Fix windows-nat.c compilation failure.
9546 * windows-nat.c (windows_thread_alive): Fix forward declaration.
9547 (get_windows_debug_event): Add ops parameter to call to windows_resume.
9549 2009-02-23 Pedro Alves <pedro@codesourcery.com>
9551 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
9553 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
9555 * symtab.c (find_line_symtab): Initialize exact to avoid
9558 2009-02-23 Pedro Alves <pedro@codesourcery.com>
9560 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
9561 `ops' to recursive call.
9563 2009-02-23 Pedro Alves <pedro@codesourcery.com>
9565 * corelow.c (get_core_registers): Adjust.
9566 (core_file_thread_alive): Rename to...
9567 (core_thread_alive): ... this.
9568 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
9569 (init_core_ops): Adjust.
9570 (coreops_suppress_target): Delete.
9571 (_initialize_corelow): Unconditionally add core_ops.
9572 * procfs.c: Include "inf-child.h".
9573 (procfs_ops): Delete.
9574 (init_procfs_ops): Delete. Reimplement as...
9575 (procfs_target): ... this, inheriting from inf-child.
9576 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
9577 (procfs_prepare_to_store): Delete.
9578 (procfs_store_registers, procfs_resume): Adjust.
9579 (procfs_open): Delete.
9580 (procfs_suppress_run): Delete.
9581 (procfs_can_run): Delete.
9582 (procfs_mourn_inferior): Adjust.
9583 (procfs_init_inferior): Add target_ops parameter. Adjust.
9584 (procfs_create_inferior): Don't pass procfs_init_inferior to
9585 fork_inferior. Instead call it after fork_inferior returns.
9586 (procfs_find_new_threads): Adjust.
9587 (_initialize_procfs): Adjust to use procfs_target instead of
9589 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
9590 (lwp_to_thread): Use target_thread_alive.
9591 (sol_thread_open): Delete.
9592 (sol_thread_attach): Delete.
9593 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
9594 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
9595 to use find_target_beneath.
9596 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
9597 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
9598 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
9599 (check_for_thread_db): New.
9600 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
9601 (sol_thread_new_objfile): Call check_for_thread_db.
9602 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
9603 (sol_thread_can_run): Delete.
9604 (sol_thread_alive): Adjust to use find_target_beneath.
9605 (sol_thread_stop): Delete.
9606 (rw_common): Use target_write_memory or target_read_memory.
9607 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
9608 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
9609 (solaris_pid_to_str): Remove check for libthread_db initialization
9611 (sol_find_new_threads): Remove check for libthread_db
9612 initialization failing, or for an invalid inferior_ptid. Adjust
9613 to use find_target_beneath.
9614 (sol_core_open, sol_core_close, sol_core_detach,
9615 sol_core_files_info, sol_find_memory_regions,
9616 sol_make_note_section, ignore): Delete.
9617 (init_sol_thread_ops): Make it a thread_stratum target. Remove
9618 unneeded callback settings.
9619 (init_sol_core_ops): Delete.
9620 (_initialize_sol_thread): No longer call init_sol_core_ops, set
9621 procfs_suppress_run, or hack with core_ops.
9623 * target.h (struct target_ops): Add a target_ops * parameter to
9624 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
9625 and to_find_new_threads.
9626 (target_fetch_registers, target_store_registers)
9627 (target_thread_alive, target_find_new_threads): Redeclare as
9630 * target.c (update_current_target): Do not inherit or de_fault
9631 to_resume, to_fetch_registers, to_store_registers,
9632 to_thread_alive, to_find_new_threads.
9633 (target_resume): Adjust.
9634 (target_thread_alive, target_find_new_threads): New.
9635 (debug_to_resume, debug_to_fetch_registers): Delete.
9636 (target_fetch_registers): New.
9637 (debug_to_store_registers): Delete.
9638 (target_store_registers): New.
9639 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
9640 (setup_target_debug): Adjust.
9642 * gdbcore.h (core_ops): Delete declaration.
9644 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
9645 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
9646 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
9647 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
9648 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
9649 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
9650 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
9651 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
9652 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
9653 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
9654 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
9655 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
9656 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
9657 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
9659 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
9660 * gdbarch.h, gdbarch.c: Regenerate.
9662 * sol2-tdep.c: Include "inferior.h".
9663 (sol2_core_pid_to_str): New.
9664 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
9666 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
9667 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
9668 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
9669 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
9671 2009-02-22 Doug Evans <dje@google.com>
9673 * exec.c (exec_file_attach): Fix comment.
9675 2009-02-22 Pedro Alves <pedro@codesourcery.com>
9677 Silence a few -Wmissing-prototypes warnings.
9680 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
9682 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
9683 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
9684 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
9685 (_initialize_amd64nbsd_tdep): ... this.
9686 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
9687 (_initialize_arm_linux_tdep): Declare.
9688 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
9689 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
9690 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
9691 * avr-tdep.c (avr_return_value): Make it static.
9692 (avr_frame_unwind_cache): Ditto.
9693 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
9694 (bsd_uthread_solib_loaded): Ditto.
9695 (bsd_uthread_solib_unloaded): Ditto.
9696 (bsd_uthread_target): Ditto.
9697 (_initialize_bsd_uthread): Declare.
9698 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
9699 (cris_frame_unwind_cache): Ditto.
9700 * frv-tdep.c (frv_return_value): Ditto.
9701 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
9702 (h8300h_use_struct_convention): Ditto.
9703 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
9705 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
9707 * hppabsd-tdep.c: Include hppabsd-tdep.h.
9708 (hppabsd_find_global_pointer): Make it static.
9709 * hppabsd-tdep.h: New.
9710 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
9711 (hppabsd_init_abi): Remove declaration.
9712 (_initialize_hppabsd_tdep): Remove declaration.
9713 (_initialize_hppanbsd_tdep): Declare.
9714 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
9715 (hppabsd_init_abi): Delete declaration.
9716 (hppaobsd_init_abi): Make it static.
9717 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
9718 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
9719 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
9720 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
9721 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
9722 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
9723 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
9724 (_initialize_m32c_tdep): Declare.
9725 * m32r-rom.c (_initialize_m32r_rom): Declare.
9726 * m32r-tdep.c (m32r_skip_prologue): Make it static.
9727 (m32r_return_value): Ditto.
9728 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
9729 (m68hc11_return_value): Ditto.
9730 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
9731 * m88k-tdep.c (m88k_frame_cache): Make it static.
9732 * mep-tdep.c (mep_gdb_print_insn): Ditto.
9733 (mep_return_value): Ditto.
9734 (_initialize_mep_tdep): Declare.
9735 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
9736 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
9737 (mips_linux_syscall_next_pc): Ditto.
9738 (_initialize_mips_linux_tdep): Declare.
9739 * mips-tdep.c (mips_single_step_through_delay): Make it static.
9740 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
9741 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
9742 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
9743 * mt-tdep.c (_initialize_mt_tdep): Declare.
9744 * nbsd-tdep.c: Include nbsd-tdep.h.
9745 * nto-tdep.c (find_load_phdr): Make it static.
9746 (_initialize_nto_tdep): Declare.
9747 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
9749 (_initialize_ppc_linux_tdep): Declare.
9750 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
9751 (m32r_insert_watchpoint, m32r_remove_watchpoint)
9752 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
9754 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
9755 * rs6000-nat.c: Include xcoffread.h.
9756 (find_toc_address): Don't extern declare get_toc_offset. Adjust
9757 to call xcoff_get_to_offset.
9758 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
9759 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
9760 (rs6000_skip_trampoline_code): Make static.
9761 * s390-tdep.c (s390_regset_from_core_section): Ditto.
9762 * sh-tdep.c (sh_register_reggroup_p): Ditto.
9763 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
9764 (_initialize_shnbsd_tdep): Declare.
9765 * solib-frv.c (displacement_from_map): Make static.
9766 (_initialize_frv_solib): Declare.
9767 * solib-irix.c (fetch_lm_info): Make static.
9768 (_initialize_irix_solib): Declare.
9769 * solib-som.c: Include solib-som.h.
9770 (som_solib_select): Line break.
9771 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
9772 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
9773 (_initialize_sparcnbsd_tdep): ... this.
9774 * spu-tdep.c (spu_software_single_step): Make it static.
9775 (_initialize_spu_tdep): Declare.
9776 * vax-tdep.c (vax_frame_cache): Make it static.
9777 * xcoffread.c: Include xcoffread.h.
9778 (get_toc_offset): Rename to ...
9779 (xcoff_get_toc_offset): ... this.
9780 (_initialize_xcoffread): Declare.
9782 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
9783 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
9785 (_initialize_xtensa_tdep): Declare.
9787 2008-02-21 Pedro Alves <pedro@codesorcery.com>
9789 Silence a few -Wmissing-prototypes warnings.
9792 * amd64-nat.c: Include "amd64-nat.h".
9793 * fork-child.c (_initialize_fork_child): Ditto.
9794 * gcore.c (_initialize_gcore): Ditto.
9795 * inf-ptrace.c: Include "inf-ptrace.h".
9796 (inf_ptrace_store_registers): Make it static.
9797 * linux-nat.c (linux_nat_terminal_ours): Make it static.
9798 (_initialize_linux_nat): Declare before definition.
9799 * linux-tdep.c: Include "linux-tdep.h".
9800 * linux-thread-db.c (_initialize_thread_db): Declare before
9802 * proc-service.c (_initialize_proc_service): Ditto.
9803 * remote.c (remote_send_printf): Make it static.
9804 * solib.c: Include "solib.h".
9805 * symfile-mem.c (_initialize_symfile_mem): Declare before
9807 * ada-lang.c (ada_la_decode, ada_match_name)
9808 (ada_suppress_symbol_printing, ada_is_array_type)
9809 (ada_value_ptr_subscript, ada_array_length)
9810 (ada_to_static_fixed_value): Make them static.
9811 (_initialize_ada_language): Declare before definition.
9812 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
9813 (ada_task_list_changed, ada_new_objfile_observer): Make them
9815 (_initialize_tasks): Declare before definition.
9816 * addrmap.c (_initialize_addrmap): Declare before definition.
9817 * auxv.c (default_auxv_parse): Make it static.
9818 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
9820 * breakpoint.c (remove_sal): Add line break.
9821 (expand_line_sal_maybe): Make it static.
9822 * cp-name-parser.y: Include "cp-support.h".
9823 * cp-valprint.c (cp_find_class_member): Make it static.
9824 * eval.c (value_f90_subarray): Ditto.
9825 * exceptions.c (print_any_exception): Ditto.
9826 * findcmd.c (_initialize_mem_search): Declare before definition.
9827 * frame.c (frame_observer_target_changed): Make it static.
9828 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
9829 * inf-child.c: Include "inf-child.h".
9830 * inferior.h (valid_inferior_id): Rename to ...
9831 (valid_gdb_inferior_id): ... this.
9832 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
9834 * jv-lang.c (java_language_arch_info): Make it static.
9835 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
9836 * osdata.c (info_osdata_command): Make it static.
9837 * regcache.c (regcache_observer_target_changed): Make it static.
9838 * reverse.c (_initialize_reverse): Declare before definition.
9839 * stabsread.c (cleanup_undefined_types_noname)
9840 (cleanup_undefined_types_1): Make them static.
9841 * symfile.c (place_section): Make it static.
9842 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
9843 * target-descriptions.c (_initialize_target_descriptions): Declare
9845 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
9846 (find_default_is_async_p, find_default_supports_non_stop): Make
9848 (target_supports_non_stop): Add prototype.
9849 (dummy_pid_to_str): Make it static.
9850 * utils.c (_initialize_utils): Declare before definition.
9851 * ada-exp.y (_initialize_ada_exp): Declare before definition.
9852 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
9853 * target.h (struct target_ops): Add a prototype to the
9854 to_can_execute_reverse callback.
9855 * macroscope.c (_initialize_macroscope): Declare before definition.
9856 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
9857 * python/python.c (_initialize_python): Declare before definition.
9858 * tui/tui-command.c: Include "tui/tui-command.h".
9859 * tui/tui-data.c (init_content_element, init_win_info): Make them
9861 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
9862 * tui/tui-interp.c (_initialize_tui_interp): Declare before
9864 * tui/tui-layout.c: Include "tui/tui-layout.h".
9865 (_initialize_tui_layout): Declare before definition.
9866 * tui/tui-regs.c: Include "tui/tui-regs.h".
9867 (tui_display_reg_element_at_line): Make it static.
9868 (_initialize_tui_regs): Declare before definition.
9869 * tui/tui-stack.c (_initialize_tui_stack): Declare before
9871 * tui/tui-win.c: Include "tui/tui-win.h".
9872 (_initialize_tui_win): Declare before definition.
9873 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
9874 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
9875 (tui_get_cmd_list): Add a prototype.
9876 * tui/tui-windata.c: Include tui-windata.h.
9877 * tui/tui-wingeneral.c (box_win): Make it static.
9878 * cli/cli-logging.c (show_logging_command): Make it static.
9879 (_initialize_cli_logging): Declare before definition.
9880 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
9883 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
9885 Extend use of i386_use_watchpoints to all i386 native files
9886 using hardware watchpoints.
9887 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
9888 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
9889 * windows-nat.c (init_windows_ops): Ditto.
9890 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
9891 * config/i386/nm-cygwin64.h: Ditto.
9892 * config/i386/nm-fbsd.h: Ditto.
9893 * config/i386/nm-go32.h: Ditto.
9895 2009-02-19 Joel Brobecker <brobecker@adacore.com>
9897 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
9899 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
9901 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
9902 (mi_interpreter_init): Register the above.
9903 * solib.c (clear_solib): Notify solib unload.
9904 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
9905 disable breakpoints on a.out targets.
9907 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
9909 * observer.c (observer_test_first_notification_function)
9910 (observer_test_second_notification_function)
9911 (observer_test_third_notification_function): Adjust prototype.
9913 2009-02-17 Pedro Alves <pedro@codesourcery.com>
9915 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
9916 (ALL_TARGET_OBS): Add dicos-tdep.o.
9917 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
9918 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
9920 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
9922 * dicos-tdep.h, dicos-tdep.c: New.
9923 * amd64-dicos-tdep.c: New.
9924 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
9925 inferior.h. Include dicos-tdep.h.
9926 (i386_dicos_init_abi): Call dicos_init_abi.
9927 (i386_dicos_bfd_has_symbol_p): Delete.
9928 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
9930 * NEWS: Mention x86-64 DICOS target support.
9932 2009-02-16 Doug Evans <dje@google.com>
9934 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
9935 All callers updated.
9936 (amd64_get_insn_details): Handle more 3-byte opcode insns.
9937 (amd64_breakpoint_p): Delete.
9938 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
9939 don't back up pc to the start of the int3.
9940 * i386-tdep.c: #include opcode/i386.h.
9941 (i386_skip_prefixes): New function.
9942 (i386_absolute_jmp_p): Constify argument.
9943 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
9944 (i386_breakpoint_p): Delete.
9945 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
9946 When fixing up after stepping an int3, don't back up pc to the start
9949 2009-02-16 Pedro Alves <pedro@codesourcery.com>
9951 * corelow.c (core_close): Don't hardcode the core's pid.
9952 (core_open): Find core threads before calling
9953 post_create_inferior.
9954 (add_to_thread_list, get_core_register_section): Take into account
9955 systems where the regset section names encode the pid of the
9958 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
9959 * gdbarch.h, gdbarch.c: Regenerate.
9961 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
9962 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
9963 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
9964 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
9966 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
9968 Include frame information for *stopped due to CLI commands.
9970 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
9971 * infcmd.c (finish_command_continuation): Pass '1' for
9972 'print_frame' parameter to the observer.
9973 * infrun.c (normal_stop): Don't print mi-specific information
9974 here. Pass 'stop_print_frame' to the 'print_frame' parameter
9976 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
9977 If we need to print frame, and current uiout is not the MI one,
9980 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
9982 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
9983 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
9985 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
9988 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
9989 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
9991 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
9993 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
9994 for DW_ATE_signed_char and DW_ATE_unsigned_char
9995 for pascal language.
9997 2009-02-11 Jim Meyering <meyering@redhat.com>
9998 Jan Kratochvil <jan.kratochvil@redhat.com>
10000 Avoid NULL dereference.
10001 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
10002 New variable func_type.
10004 2009-02-11 Pedro Alves <pedro@codesourcery.com>
10006 * gdbarch.c: Regenerate.
10008 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
10010 * p-lang.c (is_pascal_string_type): Fix comment.
10011 Determine exact size of char elements for GPC
10013 (pascal_printstr): Handle char width of 2 or 4.
10014 * p-valprint.c (pascal_val_print): Handle char
10017 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
10019 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
10020 inside the loop. Only call addrmap_set_empty if the compilation unit
10021 had DW_AT_high_pc and DW_AT_low_pc. Update call to
10022 scan_partial_symbols.
10023 (scan_partial_symbols): Take NEED_PC argument and pass it along with
10025 (add_partial_namespace): Take NEED_PC argument and pass it through.
10026 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
10029 2009-02-07 Pedro Alves <pedro@codesourcery.com>
10031 * NEWS: Mention inspecting extra signal information, $_siginfo,
10032 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
10034 2009-02-07 Pedro Alves <pedro@codesourcery.com>
10036 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
10039 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10041 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
10042 (compat_timer_t, compat_clock_t, struct compat_timeval)
10043 (compat_sigval_t, compat_siginfo_t): New types.
10044 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
10045 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
10046 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
10047 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
10048 (amd64_linux_siginfo_fixup): New.
10049 * linux-nat.c (linux_nat_siginfo_fixup): New.
10050 (siginfo_fixup): New.
10051 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
10052 siginfo layout expected by ptrace and the siginfo layout of the
10054 (linux_nat_set_siginfo_fixup): New.
10055 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
10057 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10059 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
10060 * infrun.c (siginfo_value_read, siginfo_value_write): New.
10061 (siginfo_value_funcs): New.
10062 (siginfo_make_value): New.
10063 (_initialize_infrun): Create the $_siginfo convenience variable.
10064 * gdbtypes.h (append_composite_type_field_aligned): Declare.
10065 * gdbtypes.c (append_composite_type_field): Rename to...
10066 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
10067 argument. Handle it.
10068 (append_composite_type_field): Rewrite on top of
10069 append_composite_type_field_aligned.
10070 * value.h (internalvar_make_value): New typedef.
10071 (struct internalvar) <make_value>: New field.
10072 (create_internalvar_type_lazy): Declare.
10073 * value.c (create_internalvar): Clear make_value.
10074 (create_internalvar_type_lazy): New.
10075 (value_of_internalvar): If make_value is set use it.
10076 (preserve_values): Skip internal variables that don't have a
10078 * gdbarch.sh (get_siginfo_type): New.
10079 * gdbarch.h, gdbarch.c: Regenerate.
10081 * linux-tdep.h, linux-tdep.c: New.
10082 * amd64-linux-tdep.c: Include "linux-tdep.h".
10083 (amd64_linux_init_abi): Register linux_get_siginfo_type and
10084 linux_get_siginfo_mapper.
10085 * i386-linux-tdep.c: Include "linux-tdep.h".
10086 (i386_linux_init_abi): Register linux_get_siginfo_type and
10087 linux_get_siginfo_mapper.
10088 * arm-linux-tdep.c: Include "linux-tdep.h".
10089 (i386_linux_init_abi): Register linux_get_siginfo_type and
10090 linux_get_siginfo_mapper.
10092 * linux-nat.c (linux_xfer_siginfo): New.
10093 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
10094 * remote.c (PACKET_qXfer_siginfo_read)
10095 (PACKET_qXfer_siginfo_write): New.
10096 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
10097 "qXfer:siginfo:write" features.
10098 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
10099 (_initialize_remote): Add "set/show remote read-siginfo-object"
10100 and "set/show remote write-siginfo-object" commands.
10102 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
10103 (HFILES_NO_SRCDIR): Add linux-tdep.h.
10104 (ALLDEPFILES): Add linux-tdep.c.
10106 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
10107 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
10110 2009-02-06 Jim Blandy <jimb@codesourcery.com>
10111 Daniel Jacobowitz <dan@codesourcery.com>
10112 Vladimir Prus <vladimir@codesourcery.com>
10113 Pedro Alves <pedro@codesourcery.com>
10115 * defs.h (enum lval_type): New value: lval_computed.
10116 * value.h (struct lval_funcs): New type.
10117 (allocate_computed_value, value_computed_funcs)
10118 (value_computed_closure): New declarations.
10119 * value.c (struct value): Add a structure to the location union
10120 for computed lvalues, containing 'funcs' and 'closure' members.
10121 (allocate_computed_value, value_computed_funcs)
10122 (value_computed_closure): New functions.
10123 (value_free): For computed lvalues, call the closure's
10124 'free_closure' function before freeing the value itself.
10125 (value_copy): If we're copying an lval_computed value, call the
10126 closure's 'copy_closure' function.
10127 (set_value_component_location): If the original value is a
10128 computed lvalue, then call the closure's 'copy_closure' function.
10129 (value_of_internalvar): If an internal variable's value is a
10130 computed lvalue, make retrieving its value produce an equivalent
10132 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
10133 their read function.
10134 (value_assign): Assign to computed lvalues by calling their write
10137 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10139 * linux-nat.c (linux_nat_wait): Adjust.
10140 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
10141 * linux-nat.h (thread_db_init): Delete declaration.
10142 * linux-thread-db.c (target_beneath): Delete.
10143 (thread_db_init): Delete.
10144 (thread_db_detach): Use find_target_beneath.
10145 (thread_db_wait): Adjust interface. Use find_target_beneath.
10146 (thread_db_mourn_inferior): Use find_target_beneath.
10147 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
10148 (thread_db_async_mask): Delete.
10149 (thread_db_pid_to_str): Adjust interface. Use
10150 find_target_beneath.
10151 (thread_db_get_thread_local_address): Adjust interface. Use
10152 find_target_beneath.
10153 (init_thread_db_ops): Delete references to delete functions.
10154 * target.c (update_current_target): Don't inherit or default
10155 to_wait. Don't inherit to_pid_to_str and
10156 to_get_thread_local_address.
10157 (target_translate_tls_address): Look for a pushed target that
10158 implements to_get_thread_local_address, and use it instead of
10159 checking for target_get_thread_local_address_p.
10160 (target_wait, target_pid_to_str): Reimplement as functions.
10161 (dummy_pid_to_str): New.
10162 (init_dummy_target): Register it.
10163 (debug_to_wait): Delete.
10164 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
10165 to_get_thread_local_address accept a pointer to struct target_ops.
10166 (target_wait): Delete macro, and declare as function.
10167 (target_pid_to_str): Likewise.
10168 (target_get_thread_local_address)
10169 (target_get_thread_local_address_p): Delete.
10170 (noprocess): Add NORETURN and ATTR_NORETURN tags.
10171 * inf-ptrace.c (inf_ptrace_wait): Adjust.
10172 (inf_ptrace_pid_to_str): New.
10173 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
10174 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
10175 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
10176 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
10178 * corelow.c (core_pid_to_str): Adjust.
10179 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
10180 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
10181 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
10182 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
10183 * hpux-thread.c (hpux_thread_wait): Adjust.
10184 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
10185 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
10186 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
10187 * procfs.c (procfs_pid_to_str): Adjust.
10188 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
10189 * remote-mips.c (mips_wait): Adjust.
10190 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
10191 * remote.c (remote_wait, remote_pid_to_str)
10192 (remote_get_thread_local_address): Adjust.
10193 * rs6000-nat.c (rs6000_wait): Adjust.
10194 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
10195 (sol_thread_wait, solaris_pid_to_str): Adjust.
10196 * spu-linux-nat.c (spu_child_wait): Adjust.
10197 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
10199 2009-02-06 Tom Tromey <tromey@redhat.com>
10201 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
10202 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
10203 (python-cmd.o): New target.
10204 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
10205 completer prototype.
10206 (add_cmd): Initialize destroyer member of cmd_list_element. Use
10207 make_symbol_completion_list_fn as completer.
10208 (delete_cmd): Call destroyer if one is set.
10209 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
10210 completer member. Add destroyer member.
10211 (set_cmd_completer): Add self parameter to
10212 completer prototype.
10213 * command.h (set_cmd_completer): Add cmd parameter to
10214 completer prototype.
10215 * completer.c (noop_completer, filename_completer,
10216 location_completer, expression_completer, command_completer): Adapt
10217 to new completer prototype.
10218 (complete_line_internal): Pass new parameter to completer function.
10219 * completer.h (noop_completer, filename_completer,
10220 location_completer, expression_completer, command_completer): Adapt
10221 prototypes to new completer prototype.
10222 * interps.c (interpreter_completer): Adapt to new completer
10224 * python/python-cmd.c: New file.
10225 * python/python-internal.h (gdbpy_initialize_commands): Add
10227 (gdbpy_doc_cst): Add forward declaration.
10228 * python/python.c (gdbpy_doc_cst): Declare.
10229 (_initialize_python): Call gdbpy_initialize_commands. Initialize
10231 * symtab.c (make_symbol_completion_list_fn): New function.
10232 * symtab.h (make_symbol_completion_list_fn): Add prototype.
10234 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10236 * target.c (target_get_osdata): Check for equal or higher than
10237 process_stratum, not dummy_stratum.
10239 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10241 * remote.c (extended_remote_can_run): Delete.
10242 (init_remote_ops): Don't register it.
10243 * target.c (target_get_osdata): Don't check for target_can_run.
10244 Instead any target that has already been pushed, otherwise
10245 fallback to the default run target.
10247 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10249 * target.c (target_create_inferior, target_detach)
10250 (target_mourn_inferior, target_attach, target_close): Do target
10252 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
10253 (debug_to_mourn_inferior, debug_to_close): Delete.
10254 (setup_target_debug): Adjust.
10256 2009-02-05 Pedro Alves <pedro@codesourcery.com>
10258 * target.h (target_stopped_data_address_p): Delete declaration,
10259 and don't define as macro.
10260 * target.c (target_stopped_data_address_p): Delete.
10262 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
10263 Tom Tromey <tromey@redhat.com>
10265 * python/python-utils.c (target_string_to_unicode): New function.
10266 * python/python-internal.h (target_string_to_unicode): New prototype.
10267 * python/python-value.c (valpy_string): New function.
10268 (value_object_methods): Add `string' entry.
10270 2009-02-05 Pedro Alves <pedro@codesourcery.com>
10272 * target.h (target_tid_to_str): Delete.
10273 * thread.c (print_thread_info, thread_apply_all_command)
10274 (thread_apply_command, thread_command, do_captured_thread_select):
10275 Use target_pid_to_str instead of target_tid_to_str.
10276 * linux-fork.c (delete_fork_command): Likewise.
10278 2009-02-05 Pedro Alves <pedro@codesourcery.com>
10280 * frame.c (has_stack_frames): Make public.
10281 (get_prev_frame): Don't allow a NULL this_frame anymore.
10282 * frame.h (has_stack_frames): Declare.
10283 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
10284 to get_prev_frame, instead start at get_current_frame.
10285 (varobj_create): Check has_stack_frames before getting any frame;
10286 eliminate one usage of deprecated_safe_get_selected_frame.
10288 2009-02-05 Tom Tromey <tromey@redhat.com>
10289 Thiago Jung Bauermann <bauerman@br.ibm.com>
10291 * python/python.c (GdbMethods): Move to bottom of file.
10292 (get_parameter, execute_gdb_command, gdbpy_write,
10293 gdbpy_flush): Remove forward declarations.
10294 (eval_python_from_control_command): Fix error checking of function
10295 PyRun_SimpleString. Fix error string.
10296 (python_command): Likewise.
10297 (execute_gdb_command): Added from_tty argument.
10299 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
10301 * language.h (language_dfn): Add la_get_string member.
10302 (LA_GET_STRING): New macro.
10303 (default_get_string): New prototype.
10304 * language.c (default_get_string): New function.
10305 (unknown_language_defn, auto_language_defn, local_language_defn): Use
10306 default_get_string for la_get_string.
10307 * c-lang.c (c_get_string): New function.
10308 (c_language_defn, cplus_language_defn, asm_language_defn): Use
10309 c_get_string for la_get_string.
10310 (minimal_language_defn): Likewise
10311 * ada-lang.c (ada_language_defn): Likewise.
10312 * f-lang.c (f_language_defn): Use default_get_string for
10314 * jv-lang.c (java_language_defn): Likewise.
10315 * m2-lang.c (m2_language_defn): Likewise.
10316 * objc-lang.c (objc_language_defn): Likewise.
10317 * p-lang.c (p_language_defn): Likewise.
10318 * scm-lang.c (scm_language_defn): Likewise.
10319 * typeprint.c (type_to_string): New function.
10320 * value.h (type_to_string): New prototype.
10321 * valprint.c (val_print_string): Factor out code for reading string
10322 from the inferior into its own function. Put 2 spaces after period
10324 (read_string): New function.
10325 * valprint.h (read_string): New prototype.
10327 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
10328 Tom Tromey <tromey@redhat.com>
10330 PR breakpoints/8079:
10331 * breakpoint.c (print_one_breakpoint): Use exp_string field
10332 to display expression of watchpoints.
10333 (mention): Likewise.
10334 (watch_command_1): Remove trailing whitespace from expression.
10335 * printcmd.c (struct display) <exp_string>: New field.
10336 (display_command): Set exp_string.
10337 (free_display): Free exp_string.
10338 (clear_displays): Use free_display.
10339 (do_one_display): Print exp_string.
10340 (display_info): Likewise.
10342 2009-02-04 Tom Tromey <tromey@redhat.com>
10343 Thiago Jung Bauermann <bauerman@br.ibm.com>
10344 Phil Muldoon <pmuldoon@redhat.com>
10346 * python/python-internal.h (gdbpy_get_value_from_history): Rename
10347 prototype to gdbpy_history.
10348 (gdbpy_is_string): Declare.
10349 (python_string_to_host_string): Declare.
10350 * python/python-utils.c (gdbpy_is_string): New function.
10351 (unicode_to_encoded_string): New function.
10352 (unicode_to_target_string): Use it.
10353 (python_string_to_host_string): New function.
10354 * python/python-value.c (valpy_address): New function.
10355 (convert_value_from_python): Use gdbpy_is_string. Change to throw
10356 Python exception instead of a GDB exception on error. Properly check
10358 (valpy_getitem): Convert field name to host string. Handle array
10359 accesses. Adapt to new behaviour of convert_value_from_python.
10360 (valpy_new): Adapt to new behaviour of convert_value_from_python.
10361 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
10362 VALPY_BITXOR, VALPY_BITOR>: New constants.
10363 (valpy_binop): Update. Adapt to new behaviour of
10364 convert_value_from_python.
10365 (valpy_invert): New function.
10366 (valpy_lsh): Likewise.
10367 (valpy_rsh): Likewise.
10368 (valpy_and): Likewise.
10369 (valpy_or): Likewise.
10370 (valpy_xor): Likewise.
10371 (valpy_richcompare): Call convert_value_from_python instead of doing
10372 conversions itself.
10373 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
10374 (gdbpy_get_value_from_history): Rename
10375 function to gdbpy_history.
10376 (gdbpy_initialize_values): Don't set tp_new.
10377 (value_object_type): Add valpy_new.
10378 (value_object_methods): Add `address' entry.
10379 (value_object_as_number): Update for new methods.
10380 * python/python.c (GdbMethods): Rename entry from
10381 `get_value_from_history' to `history'.
10383 2009-02-04 Jerome Guitton <guitton@adacore.com>
10385 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
10386 of type to guard against a crash.
10388 2009-02-04 Jerome Guitton <guitton@adacore.com>
10390 * value.c (value_from_contents_and_address): Always return
10391 a lval_memory value, even if address is null.
10393 2009-02-04 Tristan Gingold <gingold@adacore.com>
10395 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
10396 (amd64_darwin_sigcontext_addr): Ditto.
10397 (darwin_dwarf_signal_frame_p): Ditto.
10398 (i386_darwin_init_abi): Handle signal frames, use the const for
10400 (x86_darwin_init_abi_64): Ditto.
10402 2009-02-04 Tristan Gingold <gingold@adacore.com>
10404 * i386-tdep.c (i386_sigtramp_p): Make it public.
10405 * i386-tdep.h (i386_sigtramp_p): Declare.
10407 2009-02-04 Tristan Gingold <gingold@adacore.com>
10409 * machoread.c (macho_symfile_read): Read minsymtab also from
10411 (macho_symfile_read): Try to read dwarf2 frame info from main
10412 object file, but not from OSO files.
10413 (macho_symfile_offsets): Update section names for latest BFD
10415 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
10416 (x86_darwin_init_abi_64): Ditto.
10417 * solib-darwin.c: New file.
10418 * solib-darwin.h: New file.
10419 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
10421 2009-02-04 Tristan Gingold <gingold@adacore.com>
10423 * solist.h (struct target_so_ops): Comment fallback behavior for
10426 2009-02-03 Tom Tromey <tromey@redhat.com>
10428 * completer.c (add_struct_fields): Check type_name against NULL
10431 2009-02-03 Joel Brobecker <brobecker@adacore.com>
10433 * MAINTAINERS: Update Elena's email address.
10435 2009-02-02 Joel Brobecker <brobecker@adacore.com>
10437 * breakpoint (update_watchpoint): Minor comment adjustment.
10439 2009-02-02 Tom Tromey <tromey@redhat.com>
10442 * completer.c (count_struct_fields): Count method names.
10443 (add_struct_fields): Add matching method names.
10445 2009-02-02 Doug Evans <dje@google.com>
10447 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
10448 doing any further tcl/tk configury. Don't configure gdbtk if
10449 tcl or tk check fails.
10450 * aclocal.m4: Regenerate.
10451 * configure: Regenerate.
10453 2009-02-02 Tom Tromey <tromey@redhat.com>
10456 * valops.c (find_overload_match): Follow typedefs before taking
10457 address of object argument.
10459 2009-02-01 Doug Evans <dje@google.com>
10461 * target.h (target_waitstatus_to_string): Declare.
10462 * target.c (target_waitstatus_to_string): New function. Copied from
10463 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
10464 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
10465 TARGET_WAITKIND_NO_HISTORY.
10466 (debug_to_wait): Call it.
10467 * infrun.c (wait_for_inferior): If debug_infrun, print result of
10469 (fetch_inferior_event): Ditto.
10471 2009-01-30 Tom Tromey <tromey@redhat.com>
10473 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
10475 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
10478 * thread.c (do_captured_list_thread_ids): Report the current
10481 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
10483 * breakpoint.c (create_breakpoint, create_breakpoints)
10484 (break_command_really, set_breakpoint): New parameter enabled.
10485 (create_breakpoint, break_command_really): Make breakpoint
10486 disabled if so requested.
10487 * breakpoint.h (set_breakpoint): New parameter enabled.
10488 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
10490 2009-01-28 Doug Evans <dje@google.com>
10492 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
10493 (amd64_displaced_step_fixup): Declare.
10494 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
10495 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
10496 and make static global.
10497 (amd64_arch_regmap_len): New static global.
10498 (amd64_arch_reg_to_regnum): New function.
10499 (struct amd64_insn): New struct.
10500 (struct displaced_step_closure): New struct.
10501 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
10502 (rex_prefix_p,skip_prefixes)
10503 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
10504 (amd64_insn_length,amd64_get_unused_input_int_reg)
10505 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
10506 (amd64_displaced_step_copy_insn)
10507 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
10508 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
10509 (amd64_displaced_step_fixup): New functions.
10510 * amd64-linux-tdep.c: #include arch-utils.h.
10511 (amd64_linux_init_abi): Install displaced stepping support.
10513 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
10514 Jerome Guitton <guitton@adacore.com>
10516 * configure, config.in: Regenerated.
10517 * configure.ac: Add --with-system-gdbinit.
10518 * main.c (get_init_files): New.
10519 (captured_main): Use get_init_files. Load system gdbinit before
10521 (print_gdb_help): Print location of init files.
10523 2009-01-28 Pedro Alves <pedro@codesourcery.com>
10525 * corefile.c (generic_search): Delete disabled code.
10526 * gdbcore.h (generic_search): Delete declaration.
10528 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10530 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
10531 parent to the child.
10532 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
10533 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
10534 remove_breakpoints to remove breakpoints from the parent.
10536 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10538 PR backtrace/9458, PR backtrace/8864:
10539 * frame.c (create_new_frame): Update the frame's cached PC before
10540 finding its unwinder. Use frame_id_build to build the new frame's
10542 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
10543 array values from the ``args'' array values.
10545 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10547 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
10548 (create_array_type, create_set_type, init_flags_type)
10549 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
10550 with a call to XZALLOC or XCALLOC, and pairs of calls to
10551 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
10553 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10555 Add "maint set|show internal-error|internal-warning quit|corefile
10556 ask|yes|no" commands.
10559 * utils.c (internal_problem_ask, internal_problem_yes)
10560 (internal_problem_no, internal_problem_modes): New.
10561 (struct internal_problem): Remove FIXME. Make should_quit and
10562 should_dump_core types to char *.
10563 (internal_vproblem, internal_error_problem)
10564 (internal_warning_problem): Adjust.
10565 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
10567 (add_internal_problem_command): New.
10568 (_initialize_utils): New.
10570 2009-01-25 Pedro Alves <pedro@codesourcery.com>
10572 * infcmd.c (program_info): Use paddress instead of casting stop_pc
10575 2009-01-24 Pedro Alves <pedro@codesourcery.com>
10577 * infrun.c (normal_stop): Don't call
10578 deprecated_update_frame_pc_hack.
10579 * frame.c (deprecated_update_frame_pc_hack)
10580 (deprecated_update_frame_base_hack): Delete, and ...
10581 (create_new_frame): ... inline here.
10582 * frame.h (deprecated_update_frame_pc_hack)
10583 (deprecated_update_frame_base_hack): Delete declarations.
10585 2009-01-23 Pedro Alves <pedro@codesourcery.com>
10587 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
10588 * cli/cli-setshow.c (do_setshow_command): Handle it.
10589 * command.h (enum var_types): Add var_zuinteger.
10590 (add_setshow_zuinteger_cmd): Declare.
10592 * valprint.c (_initialize_valprint): Change the set input-radix
10593 and set output-radix commands to zuinteger type.
10595 2009-01-23 Pedro Alves <pedro@codesourcery.com>
10598 * infrun.c (normal_stop): Tag threads as stopped, and run the
10599 hook-stop before printing the stack frame.
10601 2009-01-22 Pedro Alves <pedro@codesourcery.com>
10604 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
10607 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
10609 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
10612 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
10615 * infcmd.c (signal_command): Do not specify a resume PC.
10617 2009-01-19 Doug Evans <dje@google.com>
10619 * dummy-frame.c (dummy_frame): Replace regcache member with
10621 (dummy_frame_push): Replace caller_regcache arg with caller_state.
10622 All callers updated.
10623 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
10624 (dummy_frame_pop): Rewrite. Verify requested frame is in the
10625 dummy frame stack. Restore program state.
10626 (cleanup_dummy_frames): Rewrite.
10627 (dummy_frame_sniffer): Update. Make static.
10628 * dummy-frame.h (regcache,frame_info): Delete forward decls.
10629 (inferior_thread_state): New forward decl.
10630 (dummy_frame_push): Update prototype.
10631 * frame.c (frame_pop): dummy_frame_pop now does all the work for
10633 * infcall.c (breakpoint_auto_delete_contents): Delete.
10634 (get_function_name,run_inferior_call): New fns.
10635 (call_function_by_hand): Simplify by moving some code to
10636 get_function_name, run_inferior_call. Inferior function call wrapped
10637 in TRY_CATCH so there's less need for cleanups and all exits from
10638 proceed are handled similarily. Detect program exit.
10639 Detect program stopping in a different thread.
10640 Make error messages more consistent.
10641 * inferior.h (inferior_thread_state): Declare (opaque type).
10642 (save_inferior_thread_state,restore_inferior_thread_state,
10643 make_cleanup_restore_inferior_thread_state,
10644 discard_inferior_thread_state, get_inferior_thread_state_regcache):
10646 (save_inferior_status): Update prototype.
10647 * infrun.c: (normal_stop): When stopped for the completion of an
10648 inferior function call, verify the expected stack frame kind.
10649 (inferior_thread_state): New struct.
10650 (save_inferior_thread_state,restore_inferior_thread_state,
10651 do_restore_inferior_thread_state_cleanup,
10652 make_cleanup_restore_inferior_thread_state,
10653 discard_inferior_thread_state,
10654 get_inferior_thread_state_regcache): New functions.
10655 (inferior_status): Move stop_signal, stop_pc, registers to
10656 inferior_thread_state. Remove restore_stack_info.
10657 (save_inferior_status): Remove arg restore_stack_info.
10658 All callers updated. Remove saving of state now saved by
10659 save_inferior_thread_state.
10660 (restore_inferior_status): Remove restoration of state now done by
10661 restore_inferior_thread_state.
10662 (discard_inferior_status): Remove freeing of registers, now done by
10663 discard_inferior_thread_state.
10665 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10667 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
10668 at a time, times NUM_TO_SCROLL.
10669 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
10670 fetch the selected frame if there is no stack.
10672 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10675 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
10677 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
10678 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
10679 is thrown while handling an event, finish the thread state.
10680 (normal_stop): Use finish_thread_state cleanup.
10681 * infcmd.c (run_command_1): If an error is thrown while starting
10682 the inferior, finish the thread state.
10684 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10686 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
10687 skip breakpoints without a location (pending breakpoints).
10689 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10692 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
10694 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
10696 * thread.c (thread_command): Move call to annotate_thread_changed
10698 (do_captured_thread_select): ... here, to avoid printing an
10699 annotation if the thread change generates an exception.
10701 2009-01-16 Joel Brobecker <brobecker@adacore.com>
10703 * NEWS: Document x86_64/MinGW as a new native configuration.
10705 2009-01-16 Joel Brobecker <brobecker@adacore.com>
10707 * NEWS: Move the documentation of "info os processes" to
10708 the appropriate section (documenting the new commands).
10710 2009-01-15 Doug Evans <dje@google.com>
10712 * target.h (target_signal_to_string): Make return type const char *.
10713 (target_signal_to_name): Ditto.
10714 (target_signal_from_name): Make arg const char *.
10715 * infrun.c (sig_print_info): Update.
10716 * signals/signals.c (signals): Make array and struct members const.
10717 (target_signal_to_string): Make return type const char *.
10718 (target_signal_to_name): Ditto.
10719 (target_signal_from_name): Make arg const char *.
10721 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10722 Tristan Gingold <gingold@adacore.com>
10724 * solist.h (struct target_so_ops): New member bfd_open.
10725 (solib_find): Add prototype.
10726 (solib_bfd_fopen): Add prototype.
10727 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
10728 from solib_bfd_open.
10729 (solib_bfd_open): Use ops->bfd_open override if present. Call
10730 solib_find and solib_bfd_open otherwise.
10732 * objfiles.h (OBJF_KEEPBFD): New define.
10733 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
10734 objfile flag is set.
10735 * solib.c (symbol_add_stub): Do not allocate second BFD for
10736 shared library; use OBJF_KEEPBFD flag on solib objfile.
10738 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10740 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
10742 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10744 * value.h (address_of_variable): Add prototype.
10745 (locate_var_value): Remove prototype.
10747 * findvar.c (read_var_value): Do not attempt to default frame
10749 (locate_var_value): Remove function.
10750 * valops.c (value_of_variable): Retrieve selected frame for
10751 symbols that require a frame when called with NULL block.
10752 * valops.c (address_of_variable): New function.
10754 * eval.c (evaluate_subexp_for_address): Call address_of_variable
10755 instead of calling locate_var_value.
10756 (evaluate_subexp_with_coercion): Likewise.
10758 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
10760 * NEWS: Document "define" for prefixed commands.
10761 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
10762 show_user_1 for prefix commands.
10763 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
10764 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
10765 commands. Return the containing command list.
10766 (define_command, document_command): Update to handle prefix commands.
10767 (show_user_1): Add prefix and name arguments. Handle prefix
10769 * cli/cli-script.h (show_user_1): Update prototype.
10771 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
10773 * ser-mingw.c (console_select_thread): Add return to make
10775 (pipe_select_thread): Likewise.
10776 (file_select_thread): Likewise.
10778 2009-01-14 Pedro Alves <pedro@codesourcery.com>
10780 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
10783 2009-01-14 Pedro Alves <pedro@codesourcery.com>
10785 * remote.c (extended_remote_mourn_1): Invalidate our notion of
10786 current general thread.
10788 2009-01-14 Pedro Alves <pedro@codesourcery.com>
10790 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
10791 without a live selected thread.
10793 2009-01-14 Joel Brobecker <brobecker@adacore.com>
10795 Update the copyright notice of some of the files I missed
10796 in the previous copyright update.
10798 2009-01-14 Joel Brobecker <brobecker@adacore.com>
10800 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
10801 base address instead of casting it to DWORD.
10803 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
10805 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
10806 for NULL frame pointers.
10808 2009-01-13 Mark Kettenis <kettenis@gnu.org>
10810 * utils.c (host_address_to_string): Reimplement in a way that
10811 avoids the cast of the address to long.
10813 2009-01-13 Joel Brobecker <brobecker@adacore.com>
10815 * mdebugread.c (parse_symbol): Save the symbol private data
10816 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
10817 (psymtab_to_symtab_1): Likewise.
10818 (parse_procedure): Declare variable "e" only in the scope
10819 where it is used. Extract the symbol private data using
10820 SYMBOL_VALUE_BYTES.
10822 2009-01-13 Jim Blandy <jimb@codesourcery.com>
10824 Abstract out common code for copying value locations.
10826 * value.h (set_value_component_location): New declaration.
10827 * value.c (set_value_component_location): New function.
10828 (value_primitive_field): Use it.
10829 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
10830 * valops.c (search_struct_field, value_slice): Same.
10831 * ada-lang.c (coerce_unspec_val_to_type)
10832 (ada_value_primitive_packed_val): Same.
10834 2009-01-13 Joel Brobecker <brobecker@adacore.com>
10836 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
10838 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
10840 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
10842 * i386-cygwin-tdep.c: Ditto.
10843 * i386-windows-nat.c: Ditto.
10844 * windows-nat.h: Ditto.
10845 * windows-tdep.c: Ditto.
10846 * windows-tdep.h: Ditto.
10847 * windows-nat.c: Ditto.
10848 (cygwin_load_start): Redefine as CORE_ADDR.
10849 (cygwin_load_end): Ditto.
10850 (windows_make_so): Coerce result of address arithmetic to uintptr_t
10851 before coercing to CORE_ADDR to avoid a compiler warning.
10852 (handle_exception): Define addr as CORE_ADDR and coerce
10853 ExceptionAddress to uintptr_t before assigining to avoid a compiler
10855 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
10858 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
10860 Fix linking with --enable-targets=all:
10861 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
10862 (HFILES_NO_SRCDIR): Add windows-tdep.h.
10863 (ALLDEPFILES): Add windows-tdep.c.
10865 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
10867 * win32-nat.h: Delete.
10868 * windows-nat.h: Rename from win32-nat.h.
10869 * win32-nat.c: Delete.
10870 * windows-nat.c: Rename from win32-nat.c.
10871 * win32-termcap.c: Delete.
10872 * windows-termcap.c: Rename from win32-termcap.c.
10873 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
10874 * configure.ac: Handle rename from win32-termcap.c ->
10876 * configure: Regenerate.
10877 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
10878 -> windows-termcap.c.
10879 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
10881 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
10882 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
10884 (win32_make_so): Handle cygwin compiler warning due to change of
10885 load_addr from DWORD to LPVOID.
10886 (handle_load_dll): Use %p in format string to properly print address
10887 and avoid a compiler warning.
10888 (DEBUG_EXCEPTION_SIMPLE): Ditto.
10889 (handle_exception): Ditto.
10890 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
10891 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
10893 * config/i386/mingw.mh: Ditto.
10894 * config/i386/mingw64.mh: Ditto.
10896 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
10898 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
10899 arrayprint_recurse_level to a parameter. Update all the callers. New
10900 comment at autovariables.
10902 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
10904 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
10907 2009-01-11 Joel Brobecker <brobecker@adacore.com>
10909 * target.c (target_xfer_partial): Use host_address_to_string to
10910 print the address of readbuf and writebuf. Cast the address of
10911 elements inside the myaddr buffer into intptr_t.
10912 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
10913 Cast the address of elements inside the myaddr buffer into
10916 2009-01-11 Joel Brobecker <brobecker@adacore.com>
10918 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
10919 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
10920 * configure.host, configure.tgt: Add handling for x86_64/windows.
10921 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
10922 and amd64-windows-tdep.c.
10924 2009-01-11 Joel Brobecker <brobecker@adacore.com>
10926 * win32-tdep.h, win32-tdep.c: New files.
10927 * i386-cygwin-tdep.h: Delete.
10928 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
10929 i386-cygwin-tdep.h.
10930 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
10931 * win32-nat.c: Likewise.
10932 * configure.tgt: Add win32-tdep.o to the list of target object
10933 files for i386-cygwin and i386-mingw targets.
10935 2009-01-11 Joel Brobecker <brobecker@adacore.com>
10937 * win32-nat.h: New file.
10938 * win32-nat.c (mappings): Initialize to NULL.
10939 (win32_set_context_register_offsets): New function.
10940 * i386-windows-nat.c: New file.
10941 (mappings): Moved here from win32-nat.c.
10942 (_initialize_i386_windows_nat): New function.
10943 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
10944 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
10946 2009-01-09 Andreas Schwab <schwab@suse.de>
10948 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
10950 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
10952 * gdbtypes.c (append_composite_type_field): Correct the location of
10955 2009-01-09 Pedro Alves <pedro@codesourcery.com>
10957 * defs.h (deprecated_error_hook): Delete declaration.
10958 * interps.c (clear_interpreter_hooks): Adjust.
10959 * remote-sim.c (gdb_os_error): Don't try to call
10960 deprecated_error_hook. No need to call exit anymore.
10961 * top.c (deprecated_error_hook): Delete.
10963 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10965 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
10966 to print the address of the gdbarch pointer.
10968 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10970 * gdbarch.sh: Fix all the compilation errors on amd64-windows
10971 due to casting a pointer to a long when printing a function
10972 address. Instead, use host_address_to_string to convert our
10973 address to a string.
10974 * gdbarch.c: Regenerate.
10976 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10978 * event-top.c (async_disconnect, async_stop_sig): use "raise"
10979 instead of "kill" to raise a signal.
10981 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10983 * win32-nat.c (get_module_name): Change the type of parameter
10984 "base_address" to LPVOID. Remove unnecessary cast.
10985 (struct lm_info): Change type of load_addr to LPVOID.
10986 (win32_make_so): Change the type of parameter "load_addr"
10987 to LPVOID. Remove some unnecessary casts.
10988 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
10989 (win32_xfer_shared_libraries): Add missing cast.
10991 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10993 * win32-nat.c (has_detach_ability, set_process_privilege):
10994 Cast the result of GetProcAddress to (void *) to avoid
10995 a compilation warning.
10997 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10999 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
11002 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11004 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
11005 definition of local variable "done".
11006 (info_w32_command, handle_exception): Remove unnecessary cast.
11008 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11010 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
11011 DebugSetProcessKillOnExit. Update all uses in this file.
11012 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
11013 Update all uses in this file.
11015 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11017 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
11018 and use it when pushing the target.
11019 (win32_attach, win32_create_inferior): Update call to
11020 do_initial_win32_stuff.
11021 (win32_detach, win32_mourn_inferior): Use our ops parameter
11022 instead of the global win32_ops to unpush the target.
11024 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11026 * ser-mingw.c (ser_windows_open): Use proper type when casting
11027 in call to _open_osfhandle.
11029 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
11031 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
11033 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11035 * CONTRIBUTE: Minor reformatting.
11037 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
11039 * MAINTAINERS: Add myself to Write After Approval.
11040 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
11043 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
11045 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
11046 Call exit to make it obvious to GCC.
11048 2009-01-08 Tom Tromey <tromey@redhat.com>
11050 PR breakpoints/9350:
11051 * varobj.c (varobj_invalidate): Unconditionally free
11053 * symfile.c (syms_from_objfile): Free local_addr when returning
11055 * exec.c (exec_file_attach): Do cleanups before returning.
11056 (exec_file_command): Likewise.
11057 * corefile.c (reopen_exec_file): Do cleanups before returning.
11058 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
11060 (do_vec_free): New function.
11061 (update_global_location_list): Make a cleanup for old_locations.
11062 Do cleanups before returning. Remove unused variable 'e'.
11063 (find_condition_and_thread): Free result of parsing the
11065 (print_it_typical): Do cleanups before returning.
11066 (breakpoint_re_set_one): Always free sals.sals.
11068 2009-01-08 Joel Brobecker <brobecker@adacore.com>
11069 Emi Suzuki <emi-suzuki@tjsys.co.jp>
11071 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
11074 2009-01-07 Doug Evans <dje@google.com>
11076 * top.c (gdb_prompt_string): Delete, unused.
11078 2009-01-07 Pedro Alves <pedro@codesourcery.com>
11080 Delete ONE_PROCESS_WRITETEXT leftovers.
11082 * breakpoint.c (insert_bp_location): Delete process_warning
11084 (insert_breakpoint_locations): Adjust.
11085 (reattach_breakpoints): Adjust.
11086 * infrun.c (normal_stop): Drop "It might be running in another
11089 2009-01-07 Stan Shebs <stan@codesourcery.com>
11091 * config/pa/linux.mh (XDEPFILES): Remove.
11093 2009-01-07 Doug Evans <dje@google.com>
11095 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
11097 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
11099 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
11100 spacing, a regression from 2008-04-22.
11102 2009-01-07 Joel Brobecker <brobecker@adacore.com>
11104 * utils.c (gdb_print_host_address): Adjust implementation to
11105 reuse host_address_to_string. Move comment explaining the conversion
11106 from host address to string from here...
11107 (host_address_to_string): ... to there.
11109 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
11111 * MAINTAINERS: Add myself for write after approval privileges.
11113 2009-01-06 Tom Tromey <tromey@redhat.com>
11115 * value.c (set_internalvar): Use value_free, not xfree.
11117 2009-01-06 Jim Blandy <jimb@red-bean.com>
11119 Check return values of functions declared with warn_unused_result
11120 attribute in GLIBC 2.8.
11121 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
11122 * inflow.c (check_syscall): New function.
11123 (new_tty): Use check_syscall to check return values from open and dup.
11124 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
11125 * main.c (captured_main): Call cwd after setting up gdb_stderr;
11126 check for errors from getcwd.
11127 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
11128 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
11129 (stdio_file_fputs): Same.
11130 * utils.c (internal_vproblem): abort if last-ditch error message
11133 * top.c (gdb_init): Don't set the current directory here; that's
11134 already been done in captured_main.
11136 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
11138 * ser-tcp.c: Adjust includes.
11139 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
11140 (tcp_auto_retry, tcp_retry_limit): Declare.
11141 (TIMEOUT): Remove, in favor of tcp_retry_limit.
11142 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
11143 (wait_for_connect): New function.
11144 (net_open): Use it. Add auto-retry logic.
11145 (set_tcp_cmd, show_tcp_cmd): New functions.
11146 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
11147 and "set/show tcp connect-timeout" commands.
11148 * NEWS: Document new commands.
11150 2009-01-05 Tom Tromey <tromey@redhat.com>
11152 * python/python-internal.h (Py_ssize_t): Define as int.
11154 2009-01-05 Jim Blandy <jimb@red-bean.com>
11156 * MAINTAINERS: Fix my e-mail address as steering committee member.
11158 2009-01-03 Joel Brobecker <brobecker@adacore.com>
11160 Updated copyright notices for most files.
11162 2009-01-03 Joel Brobecker <brobecker@adacore.com>
11164 * top.c (print_gdb_version): Update copyright year.
11166 2009-01-03 Joel Brobecker <brobecker@adacore.com>
11168 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
11170 2009-01-01 Pedro Alves <pedro@codesourcery.com>
11172 PR breakpoints/9681:
11173 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
11174 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
11175 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
11176 retrow all other exceptions.
11178 For older changes see ChangeLog-2008.
11184 version-control: never
OSDN Git Service
