1 2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
3 * infcall.c (show_unwind_on_terminating_exception_p): New
5 (call_function_by_hand): Create breakpoint and clean-up call for
6 std::terminate.breakpoint. Add unwind_on_terminating_exception_p
7 gate. Pop frame on breakpoint hit.
8 (_initialize_infcall): Add add_setshow_boolean_cmd for
9 unwind-on-terminating-exception.
11 2009-06-12 Kevin Buettner <kevinb@redhat.com>
13 * dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
14 `has_section_at_zero' flag from stripped objfile to separate,
15 debug info only, objfile.
17 2009-06-12 Pedro Alves <pedro@codesourcery.com>
19 * exec.h (section_table_xfer_memory_partial): Improve description,
21 * exec.c (section_table_xfer_memory_partial): Remove stale
24 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
26 * nto-tdep.h (nto_generic_supply_gpregset)
27 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
28 * nto-tdep.c (nto_generic_supply_gpregset)
29 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
31 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
33 * i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
34 (i386nto_sigcontext_addr): Change the way context address is calculated.
35 (i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
36 sc_sp_offset and set sc_reg_offset and sc_num_regs.
38 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
40 * i386-nto-tdep.c (i386_nto_target): Remove definition.
41 (init_i386nto_ops): Use macros to set fields to global
42 current_nto_target directly.
43 (i386nto_init_abi): Remove unused nto_set_target call.
44 * nto-tdep.h (nto_set_target): Remove unused declaration.
45 * nto-tdep.c (nto_set_target): Remove unused function.
47 2009-06-11 Pedro Alves <pedro@codesourcery.com>
49 * breakpoint.c (break_command_really): Rename local variable
50 breakpoint_chain to bkpt_chain.
52 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
54 Add support for XMM registers.
55 * i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
56 (i386nto_register_area): Correctly calculate offsets and sizes for
57 all supported registers.
59 2009-06-11 Tom Tromey <tromey@redhat.com>
61 * eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
62 'static' from local variable definitions.
64 2009-06-11 Pedro Alves <pedro@codesourcery.com>
66 * symtab.c (append_expanded_sal): Remove unused local variables.
68 2009-06-11 Pedro Alves <pedro@codesourcery.com>
70 * infrun.c (sched_multi): New global.
71 (resume): If sched_multi is set, resume only threads of the
73 (prepare_to_proceed): Don't switch over to wait_ptid if we're
74 resuming a different inferior, and sched_multi is off.
75 (show_schedule_multiple): New.
76 (_initialize_infrun): Register new "set schedule-multiple" command.
77 * inferior.h (sched_multi): Declare.
78 * NEWS: Mention new "schedule-multiple" setting.
80 2009-06-11 Pedro Alves <pedro@codesourcery.com>
82 * varobj.c (varobj_create): Properly restore the selected frame.
84 2009-06-05 Tom Tromey <tromey@redhat.com>
86 * inferior.c (print_inferior): Make a table, not a list. Emit
89 2009-06-10 Jonas Maebe <jonas.maebe@elis.ugent.be>
91 * darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
92 darwin_wait (blocking wait).
93 (darwin_kill_inferior): Likewise.
95 2009-06-10 Pedro Alves <pedro@codesourcery.com>
97 * infrun.c (handle_inferior_event): Update comment around trying
98 to revert back to a stepping thread that has exited.
100 2009-06-10 Cary Coutant <ccoutant@google.com>
102 * dwarf2read.c (dwarf_decode_lines): Recognize and ignore
103 DW_LNE_set_discriminator.
105 2009-06-10 Pierre Muller <muller@ics.u-strasbg.fr>
107 * breakpoint.c: ARI fixes.
108 (create_overlay_event_breakpoint): Avoid assignment inside if statement.
109 (print_one_breakpoint_location): Likewise.
110 (create_longjmp_breakpoint): Likewise.
111 (tracepoint_save_command): Likewise
112 (bpstat_find_step_resume_breakpoint): No operator at end of line.
113 (bpstat_stop_status): Likewise.
114 (describe_other_breakpoints): Likewise.
115 (hw_watchpoint_used_count): Likewise.
116 (expand_line_sal_maybe): Likewise.
117 (break_command_really): Likewise.
118 (delete_command): Likewise.
119 (do_enable_breakpoint): Likewise.
120 (delete_trace_command): Likewise.
121 (catch_exception_command_1): Likewise and remove extra parentheses.
123 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
125 * breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
126 "ubreak" command that does not exist.
128 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
130 * cli/cli-decode.c (add_alias_cmd): Correct assertion.
132 2009-06-07 Pedro Alves <pedro@codesourcery.com>
134 * hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
136 2009-06-07 Pedro Alves <pedro@codesourcery.com>
139 * proc-utils.h (procfs_first_available): Don't declare here.
140 * sol-thread.c: Include procfs.h instead of sys/procfs.h and
142 * procfs.c: Include procfs.h.
143 (procfs_target): Make it public. Don't register
144 procfs_can_use_hw_breakpoint here.
145 (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
146 defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
147 (procfs_can_use_hw_breakpoint): Remove check of
148 TARGET_HAS_HARDWARE_WATCHPOINTS.
149 (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
151 (_initialize_procfs): Don't add the procfs target here.
153 * i386-sol2-nat.c: Include target.h and procfs.h.
154 (_initialize_amd64_sol2_nat): Install the procfs target here,
155 customized with watchpoints support.
156 * irix5-nat.c: Include target.h.
157 (_initialize_core_irix5): Rename to ...
158 (_initialize_irix5_nat): ... this. Install the procfs target
159 here, customized with watchpoints support.
160 * alpha-nat.c: Include procfs.h.
161 (_initialize_core_alpha): Rename to...
162 (_initialize_alpha_nat): ... this. Install the procfs target
163 here, customized with watchpoints support.
164 * sparc-sol2-nat.c: Include target.h and procfs.h.
165 (_initialize_sparc_sol2_nat): New.
167 * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
168 * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
169 * config/mips/irix5.mh (NAT_FILE): Delete.
170 * config/mips/irix6.mh (NAT_FILE): Delete.
171 * config/mips/nm-irix5.h: Delete.
173 20009-06-07 Pedro Alves <pedro@codesourcery.com>
175 * auxv.c (procfs_xfer_auxv): Change type of the `object' argument
176 to enum target_object. Cleanup comments.
177 * auxv.h: Include "target.h". Cleanup comments to not mention
178 NATIVE_XFER_AUXV anymore.
180 2009-06-07 Pedro Alves <pedro@codesourcery.com>
182 * inferior.h (procfs_first_available): Move declaration to...
183 * proc-utils.h: ... here.
184 * sol-thread.c: Include procfs.h and proc-utils.h.
186 2009-06-07 Pedro Alves <pedro@codesourcery.com>
188 * inferior.h (proc_iterate_over_mappings): Delete declaration.
189 * nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
190 * procfs.c (proc_iterate_over_mappings): Delete.
192 2009-06-07 Pedro Alves <pedro@codesourcery.com>
194 * target.h (struct target_ops): Make to_has_all_memory,
195 to_has_memory, to_has_stack, to_has_registers and to_has_execution
196 methods instead of variables.
197 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
198 (target_has_registers_1, target_has_execution_1): Declare
200 (target_has_all_memory): Rewrite to call target_has_all_memory_1.
201 (target_has_memory): Rewrite to call target_has_memory_1.
202 (target_has_stack): Rewrite to call target_has_all_stack_1.
203 (target_has_registers): Rewrite to call target_has_registers_1.
204 (target_has_execution): Rewrite to call target_has_execution_1.
205 (default_child_has_all_memory, default_child_has_memory)
206 (default_child_has_stack, default_child_has_registers)
207 (default_child_has_execution): Declare.
208 (target_mark_running, target_mark_exited): Delete declarations.
209 * target.c (default_child_has_all_memory,
210 default_child_has_memory, default_child_has_stack,
211 default_child_has_registers, default_child_has_execution): New.
212 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
213 target_has_registers_1, target_has_execution_1): New.
214 (add_target): Default the to_has_all_memory, to_has_all_memory,
215 to_has_memory, to_has_stack, to_has_registers and to_has_execution
216 callbacks to return 0.
217 (update_current_target): Do not inherit to_has_all_memory,
218 to_has_memory, to_has_stack, to_has_registers or to_has_execution.
219 (target_mark_running, target_mark_exited): Delete.
220 (memory_xfer_partial): Adjust.
221 (target_read_memory, target_write_memory, target_search_memory):
222 Dispatch to the the top-most target, not the flattened
224 (target_info): Adjust.
225 (init_dummy_target): Install return_zero as callback for
226 to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
228 (set_maintenance_target_async_permitted): Use have_live_inferiors
229 instead of target_has_execution.
230 * target-memory.c (target_write_memory_blocks): Dispatch memory
231 writes to the the top-most target, not the flattened
234 * breakpoint.c (insert_breakpoints): Don't check for
235 target_has_execution here.
236 (update_global_location_list): Check if there are live inferiors
237 to debug instead of target_has_execution.
238 * infcmd.c (kill_command, detach_command): Check if there are
239 inferiors instead of target_has_execution.
240 * inferior.h (have_live_inferiors): Declare.
241 * inferior.c (have_live_inferiors): New.
242 * infrun.c (normal_stop): Don't check for target_has_execution to
243 finish the thread states.
244 * thread.c (is_thread_state, is_stopped, is_exited, is_running)
245 (any_running, is_executing): Remove checks for
246 target_has_execution.
247 * top.c (kill_or_detach): Don't try to kill core inferiors.
248 (quit_target): Don't check for target_has_execution.
250 * corelow.c (core_has_memory, core_has_stack, core_has_registers):
252 (init_core_ops): Install core_has_memory, core_has_stack and
254 * exec.c (exec_has_memory): New.
255 (init_exec_ops): Install exec_has_memory.
256 * remote.c (remote_add_inferior): Don't call target_mark_running.
257 (remote_start_remote): Don't call target_mark_exited or call
259 (remote_open_1): Use have_inferiors instead of
260 target_has_execution. Don't use target_mark_exited.
261 (init_remote_ops): Install deafult_child_has_all_memory,
262 default_child_has_memory, default_child_has_stack,
263 default_child_has_registers, default_child_has_execution.
264 * bsd-kvm.c (bsd_kvm_return_one): New.
265 (bsd_kvm_add_target): Register bsd_kvm_return_one as
266 to_has_memory, to_has_stack and to_has_registers callbacks.
267 * remote-m32r-sdi.c (m32r_return_one): New.
268 (init_m32r_ops): Register it.
269 * inf-child.c (inf_child_target): Adjust to register
270 default_child_has_all_memory, default_child_has_memory,
271 default_child_has_stack, default_child_has_registers,
272 default_child_has_execution callbacks.
273 * gnu-nat.c (init_gnu_ops): Likewise.
274 * go32-nat.c (init_go32_ops): Likewise.
275 * hpux-thread.c (init_hpux_thread_ops): Likewise.
276 * monitor.c (init_base_monitor_ops): Likewise.
277 * nto-procfs.c (init_procfs_ops): Likewise.
278 * remote-mips.c (_initialize_remote_mips): Likewise.
279 * windows-nat.c (init_windows_ops): Likewise.
280 * remote-sim.c (gdbsim_create_inferior): Don't use
281 target_mark_running or target_mark_exited.
282 (gdbsim_mourn_inferior): Don't call target_mark_exited.
283 (init_gdbsim_ops): Adjust to register
284 default_child_has_all_memory, default_child_has_memory,
285 default_child_has_stack, default_child_has_registers,
286 default_child_has_execution callbacks.
288 * linux-nat.c (linux_nat_xfer_partial): If reading memory, and
289 there's no inferior selected, defer to a lower stratum.
291 2009-06-05 Tom Tromey <tromey@redhat.com>
293 * varobj.c (update_dynamic_varobj_children): Wrap error text in
295 (install_visualizer): Likewise.
296 (varobj_set_visualizer): Likewise.
298 2009-06-05 Marc Khouzam <marc.khouzam@ericsson.com>
300 * mi/mi-main.c (mi_cmd_exec_continue)
301 (mi_cmd_exec_interrupt): Adjust parsing of thread group
302 ids to current reality, where they don't have any 'p' prefix.
304 2009-06-05 Aleksandar Ristovski <aristovski@qnx.com>
306 * corelow.c (core_open): Check for core_gdbarch before calling
307 gdbarch_target_signal_from_host.
309 2009-06-05 Tom Tromey <tromey@redhat.com>
311 * c-exp.y (parse_number): Don't use K&R definition.
315 2009-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
317 * varobj.c (varobj_update): Fix out of scope varobjs to not to change.
319 2009-06-04 Ulrich Weigand <uweigand@de.ibm.com>
321 * symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
322 * ax-gdb.c (gen_var_ref): Likewise.
323 * findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
324 * printcmd.c (address_info): Likewise.
325 * dwarf2loc.c (dwarf_expr_frame_base): Likewise.
326 * dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
327 * symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
328 * dwarf2loc.h: Likewise.
329 * dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.
331 * symtab.h: (struct symbol_register_ops): New struct definition.
332 (struct symbol): Make "ops" member a union of symbol_computed_ops and
333 symbol_register_ops callback pointers.
334 (SYMBOL_REGISTER_OPS): New macro.
335 * tracepoint.c: Include "objfiles.h".
336 (scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
337 callback to retrieve register numbers.
338 * ax-gdb.c (gen_var_ref): Likewise.
339 * findvar.c (read_var_value): Likewise.
340 * printcmd.c (address_info): Likewise.
342 * coffread.c (coff_reg_to_regnum): New function.
343 (coff_register_funcs): New static variable.
344 (process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
345 Install SYMBOL_REGISTER_OPS callbacks.
346 * mdebugread.c (mdebug_reg_to_regnum): New function.
347 (mdebug_register_funcs): New static variable.
348 (parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
349 Install SYMBOL_REGISTER_OPS callbacks.
350 * stabsread.c (stab_reg_to_regnum): New function.
351 (stab_register_funcs): New static variable.
352 (define_symbol): Do not call gdbarch_stab_reg_to_regnum.
353 Install SYMBOL_REGISTER_OPS callbacks.
355 2009-06-03 Doug Evans <dje@google.com>
357 * symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
358 after discarding its contents.
360 2009-06-03 Pedro Alves <pedro@codesourcery.com>
362 * target.c: Include "exec.h".
363 (update_current_target): Don't inherit to_sections or
365 (target_get_section_table): New.
366 (target_section_by_addr): Fetch the section table from the passed
368 (memory_xfer_partial): Handle unmapped overlay sections before
369 anything else. Get the overlay mapped address here. Adjust to
370 use section_table_xfer_memory_partial.
371 (get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
372 instead of TARGET_OBJECT_MEMORY.
373 (target_resize_to_sections): Delete.
374 (remove_target_sections): Adjust to remove target sections from
375 `current_target_sections', and use resize_section_table.
376 * target.h (struct target_ops) <to_sections, to_sections_end>:
378 <to_get_section_table>: New method.
379 (xfer_memory, print_section_info): Delete declarations.
380 (struct target_section_table): New type.
381 (target_get_section_table): Declare.
382 (target_resize_to_sections): Delete declaration.
383 (remove_target_sections): Delete declaration.
384 * bfd-target.c (target_bfd_xfer_partial): Get the section table
386 (target_bfd_get_section_table): New.
387 (target_bfd_xclose): Adjust.
388 (target_bfd_reopen): Store the section table in the to_data field.
389 * corelow.c (core_data): New.
390 (core_close): Adjust to release core_data and its sections.
391 (core_open): Allocate core_data, and build its target sections
393 (deprecated_core_resize_section_table): New.
394 (core_files_info): Pass core_data to print_section_info.
395 (core_xfer_partial): Adjust to use
396 section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
397 (init_core_ops): Do not install a deprecated_xfer_memory callback
399 * solib.c (update_solib_list): Add the shared library sections
400 to the current target sections table.
401 * exec.c (current_target_sections_1): New global.
402 (current_target_sections): New global.
403 (exec_close_1): New function, refactored from exec_close. Remove
404 the exec_bfd's sections from the current target sections table.
405 Adjust to not use to_sections.
406 (exec_close): Remove all target sections. Call exec_close_1.
407 (exec_file_clear): Use exec_close_1 instead of unpushing the
409 (exec_file_attach): Likewise. Adjust to not use to_sections. Add
410 exec_bfd's sections to the current target sections table. Don't
411 push the exec_ops target here.
412 (resize_section_table): New.
413 (add_target_sections): New.
414 (remove_target_sections): Moved here.
415 (section_table_xfer_memory): Adjust to implement the xfer_partial
416 interface, and rename to...
417 (section_table_xfer_memory_partial): ... this, replacing the
418 current function of that same name.
419 (exec_get_section_table): New.
420 (exec_xfer_partial): New.
421 (xfer_memory): Delete.
422 (print_section_info): Replace the target_ops parameter by a
423 target_section_table parameter.
424 (exec_files_info, set_section_command, exec_set_section_address):
425 Adjust to use the current sections table.
426 (init_exec_ops): Do not register a deprecated_xfer_memory
427 callback. Register to_xfer_partial and to_get_section_table
429 * infrun.c (handle_inferior_event): Update comments around
431 * rs6000-nat.c (xcoff_relocate_core): Adjust to use
432 deprecated_core_resize_section_table.
433 * exec.h (resize_section_table): Declare.
434 (section_table_xfer_memory_partial): Add const char * argument.
435 (remove_target_sections): Declare here.
436 (add_target_sections): Declare.
437 (print_section_info): Declare here.
438 * gdbcore.h (deprecated_core_resize_section_table): Declare.
440 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
442 * value.h (struct internalvar): Remove.
443 (get_internalvar_integer): Add prototype.
444 (set_internalvar_integer): Add prototype.
445 (clear_internalvar): Add prototype.
447 * value.c (struct internalvar): Move here. Add type member. Remove
448 endian member. Add union_internalvar member instead of value member.
449 (init_if_undefined_command): Use intvar->type.
450 (create_internalvar): Do not initialize value/endian, but type.
451 (create_internalvar_type_lazy): Call create_internalvar.
452 (value_of_internalvar): Handle host-side internalvar contents.
453 (set_internalvar_component): Likewise.
454 (set_internalvar): Likewise.
455 (get_internalvar_integer): New function.
456 (clear_internalvar): Likewise.
457 (set_internalvar_integer): Likewise.
458 (preserve_values): Handle host-side internalvar contents.
460 * breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
461 set_internalvar_integer instead of set_internalvar.
462 * findcmd.c (find_command): Likewise.
463 * infrun.c (handle_inferior_event): Likewise.
464 * source.c (forward_search_command, reverse_search_command): Likewise.
465 * tracepoint.c (set_traceframe_num, set_tracepoint_num,
466 set_traceframe_context): Likewise.
468 * printcmd.c (x_command): Call clear_internalvar instead of
470 * tracepoint.c (set_traceframe_context): Likewise.
472 * breakpoint.c (get_number_trailer): Call get_internalvar_integer
473 instead of value_of_internalvar.
474 * linespec.c (decode_dollar): Likewise.
476 * expprint.c (dump_subexp_body_standard): Use internalvar_name
477 instead of accessing internalvar private elements.
478 * valops.c (value_assign): Copy from original source instead of
479 accessing internalvar private elements.
481 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
483 * scm-lang.c (builtin_type_scm): Remove.
484 (scm_lookup_name): Add GDBARCH parameter. Use it instead of
485 objfile architecture. Use per-architecture builtin_scm_type instead
487 (evaluate_exp): Pass expression architecture to scm_lookup_name.
489 (scm_get_field): Add SIZE parameter. Use it instead of
490 TYPE_LENGTH (builtin_type_scm).
492 (build_scm_types): New function.
493 (scm_type_data): New variable.
494 (builtin_scm_type): New function.
495 (_initialize_scheme_language): Do not initialize builtin_type_scm.
496 Register build_scm_types as post-init function for scm_type_data.
498 * scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
499 instead of builtin_type_scm.
501 * scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
502 (scm_get_field): Add SIZE paramter.
503 (scm_scmval_print): Remove prototype.
504 (builtin_type_scm): Remove.
505 (struct builtin_scm_type): Add structure definition.
506 (builtin_scm_type): Add prototype.
508 * scm-valprint.c (scm_inferior_print): Add TYPE parameter. Use it
509 instead of builtin_core_addr type; do not use objfile architecture.
510 (scm_scmlist_print): Add TYPE parameter. Use it to define SCM_SIZE.
511 Pass type to scm_scmval_print.
512 (scm_ipruk): Add TYPE parameter. Use it to define SCM_SIZE.
513 (scm_scmval_print): Make static. Add TYPE parameter. Use it to
514 define SCM_SIZE. Pass type to scm_ipruk and scm_scmlist_print.
515 (scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.
517 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
519 * mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
520 mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
521 mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
522 mdebug_type_unsigned_char, mdebug_type_unsigned_short,
523 mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
524 mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
525 mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
526 mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
527 mdebug_type_complex, mdebug_type_double_complex,
528 mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
531 (basic_type_data): New global variable.
532 (basic_type): New function.
533 (parse_type): Remove static basic type map map_bt. Call basic_type
534 to get basic types instead of using mdebug_type_ variables.
536 (parse_symbol): Use builtin types instead of mdebug_type_ variables.
537 (upgrade_type): Likewise.
538 (parse_procedure): Likewise.
539 (psymtab_to_symtab_1): Likewise.
541 (_initialize_mdebugread): Do not initialize mdebug_type_ variables.
542 Initialize basic_type_data.
544 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
546 * dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
547 * dfp.c (promote_decimal): Remove.
548 (decimal_binop): Convert LEN_RESULT to input parameter.
549 Remove call to decimal_binop.
550 (decimal_compare): Remove call to decimal_binop.
552 * valarith.c (value_binop): Pass desired result type length
555 2009-06-01 Tristan Gingold <gingold@adacore.com>
557 * configure.tgt (avr): Set gdb_sim to use the simulator.
559 2009-05-29 Doug Evans <dje@google.com>
561 * infrun.c (prepare_to_proceed): Document. Assert !non_stop.
562 If scheduler-locking is enabled, we're not going to be singlestepping
563 any other previously stopped thread.
565 2009-05-29 Pedro Alves <pedro@codesourcery.com>
567 * mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.
569 2009-05-29 Eli Zaretskii <eliz@gnu.org>
571 * i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
572 for stabs and COFF debug info.
574 2009-05-28 Pedro Alves <pedro@codesourcery.com>
576 * infrun.c (handle_inferior_event): When thread hoping, switch
577 inferior_ptid to the event thread before removing breakpoints from
578 the target. If not stopping, also try to revert back to a thread
579 that was doing a "next". Check if that thread still exists before
581 (currently_stepping_thread): Delete and merge with ...
582 (currently_stepping): ... this.
583 (currently_stepping_callback): Rename to ...
584 (currently_stepping_or_nexting_callback): ... this, and also
585 return true if the thread was stepping over a call (has a
586 step-resume breakpoint).
588 2009-05-28 Tom Tromey <tromey@redhat.com>
590 * python/python.c (gdbpy_parameter): Rename. Fix error message.
591 (GdbMethods): Change "get_parameter" to "parameter".
593 2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
594 Paul Pluzhnikov <ppluzhnikov@google.com>
596 * configure.ac (!have_libpython): Add python-prettyprint source
598 * configure: Regenerate.
599 * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
602 2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
603 Tom Tromey <tromey@redhat.com>
604 Thiago Jung Bauermann <bauerman@br.ibm.com>
606 * mi/mi-main.c (mi_cmd_list_features): List "python" feature.
607 * varobj.h (varobj_set_visualizer): Declare.
608 (varobj_get_display_hint): Likewise.
609 (varobj_update_result_t) <children_changed, value_installed>: New
611 * mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
612 * mi/mi-cmds.h (mi_cmd_var_set_visualizer,
613 mi_cmd_var_set_child_range): Declare.
614 * mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
615 (mi_cmd_var_list_children): Emit display hint.
616 (varobj_update_one): Emit display hint. Handle dynamic children.
617 * python/python.c (GdbMethods): Add "default_visualizer".
618 * python/python-internal.h (apply_varobj_pretty_printer,
619 gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
621 (gdbpy_default_visualizer): Likewise.
622 * varobj.c: Include python.h, python-internal.h.
623 (PyObject): New typedef.
624 (struct varobj) <children_requested, pretty_printer>: New fields.
625 (varobj_create): Call install_default_visualizer.
626 (instantiate_pretty_printer): New function.
627 (varobj_set_display_format): Update.
628 (varobj_get_display_hint): New function.
629 (update_dynamic_varobj_children): New function.
630 (varobj_get_num_children): Handle dynamic children.
631 (varobj_list_children): Likewise.
632 (install_new_value): Likewise.
633 (varobj_add_child): New function.
634 (install_visualizer): Likewise.
635 (install_default_visualizer): Likewise.
636 (varobj_set_visualizer): Likewise.
637 (varobj_update): Handle dynamic children.
638 (create_child): Use create_child_with_value.
639 (create_child_with_value): New function.
640 (value_get_print_value): Call pretty printer. Add value_formatter
642 (c_value_of_variable): Update.
643 (varobj_invalidate): Always free all_rootvarobj.
644 * python/python-prettyprint.c (apply_varobj_pretty_printer): New
646 (gdbpy_get_varobj_pretty_printer): Likewise.
647 (gdbpy_default_visualizer): Likewise.
649 2009-05-27 Tom Tromey <tromey@redhat.com>
650 Thiago Jung Bauermann <bauerman@br.ibm.com>
651 Phil Muldoon <pmuldoon@redhat.com>
652 Paul Pluzhnikov <ppluzhnikov@google.com>
653 Vladimir Prus <vladimir@codesourcery.com>
655 * python/python-value.c (value_object_to_value): New function.
656 * python/python-internal.h: Include frameobject.h.
657 (gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
659 (value_object_to_value): Declare.
660 * printcmd.c (struct format_data) <raw>: New field.
661 (last_format): Default to 0.
662 (decode_format): Initialize val.raw. Handle /r flag.
663 (print_command_1): Initialize fmt.raw and opts.raw.
664 (output_command): Likewise.
665 (x_command): Fix initialization of fmt.format. Initialize
667 (display_command): Initialize fmt.raw.
668 (do_one_display): Set opts.raw.
669 * python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
670 gdbpy_display_hint_cst): New globals.
671 (_initialize_python): Initialize them. Set gdb.pretty_printers.
672 * cp-valprint.c: Include python.h.
673 (cp_print_value): Call apply_val_pretty_printer.
674 * python/python.h (apply_val_pretty_printer): Declare.
675 * stack.c (print_this_frame_argument_p): Remove.
676 (print_frame_args): Compute summary flag. Don't use
677 print_this_frame_argument_p.
678 * valprint.c: Include python.h.
679 (user_print_options): Initialize new fields.
680 (scalar_type_p): New function.
681 (val_print): Handle 'raw' and 'summary' modes. Call
682 apply_val_pretty_printer.
683 (value_print): Handle 'raw' mode.
684 * valprint.h (struct value_print_options) <raw, summary>: New
686 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
687 (SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
688 (python-prettyprint.o): New target.
689 * python/python-prettyprint.c: New file.
691 2009-05-27 Tom Tromey <tromey@redhat.com>
692 Paul Pluzhnikov <ppluzhnikov@google.com>
694 * mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
696 * cli/cli-dump.c (dump_value_to_file): Use value_address.
697 * valprint.c (common_val_print): Likewise.
698 * v850-tdep.c (v850_push_dummy_call): Use value_address.
699 * tracepoint.c (encode_actions): Use value_address.
700 * printcmd.c (print_formatted): Use value_address.
701 (x_command): Likewise.
702 * p-valprint.c (pascal_object_print_static_field): Use
704 * mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
705 * mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
706 * m32r-tdep.c (m32r_push_dummy_call): Use value_address.
707 * jv-valprint.c (java_value_print): Use value_address.
708 * infcall.c (find_function_addr): Use value_address.
709 * gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
710 * gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
711 * frv-tdep.c (frv_push_dummy_call): Use value_address.
712 * frame.c (frame_register_unwind): Use value_address.
713 (frame_unwind_register_value): Likewise.
714 * darwin-nat-info.c (info_mach_region_command): Use
716 * cp-valprint.c (cp_print_static_field): Use value_address.
717 * c-valprint.c (c_value_print): Use value_address.
718 * breakpoint.c (update_watchpoint): Use value_address.
719 (can_use_hardware_watchpoint): Likewise.
720 * ada-valprint.c (ada_val_print_1): Use value_address.
721 (ada_value_print): Likewise.
722 * ada-tasks.c (read_fat_string_value): Use value_address.
723 * jv-lang.c (java_link_class_type): Use set_value_address.
724 (java_link_class_type): Likewise.
725 (get_java_utf8_name): Use value_address.
726 (type_from_class): Likewise.
727 (java_link_class_type): Likewise.
728 * findvar.c (value_of_register): Use set_value_address.
729 (read_var_value): Likewise.
730 (read_var_value): Likewise.
731 * eval.c (evaluate_subexp_standard): Use set_value_address.
732 (evaluate_subexp_standard): Use value_address.
733 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
734 * ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
735 (ada_value_primitive_packed_val): Likewise.
736 (ensure_lval): Likewise.
737 (thin_data_pntr): Use value_address.
738 (desc_bounds): Likewise.
739 (ada_value_primitive_packed_val): Likewise.
740 (value_assign_to_component): Likewise.
741 (ensure_lval): Likewise.
742 (make_array_descriptor): Likewise.
743 (ada_to_fixed_value): Likewise.
744 (unwrap_value): Likewise.
745 * value.c (deprecated_value_address_hack): Remove.
746 (value_address): New function.
747 (value_raw_address): Likewise.
748 (set_value_address): Likewise.
749 (value_fn_field): Use set_value_address.
750 (value_from_contents_and_address): Likewise.
751 (value_fn_field): Likewise.
752 (allocate_value_lazy): Don't use VALUE_ADDRESS.
753 (value_as_address): Use value_address.
754 (value_static_field): Likewise.
755 * valops.c (search_struct_field): Use set_value_address.
756 (value_at): Likewise.
757 (value_at_lazy): Likewise.
758 (value_repeat): Likewise.
759 (value_cast_structs): Use value_address.
760 (value_cast): Likewise.
761 (value_fetch_lazy): Likewise.
762 (value_assign): Likewise.
763 (value_repeat): Likewise.
764 (address_of_variable): Likewise.
765 (value_coerce_array): Likewise.
766 (value_coerce_function): Likewise.
767 (value_addr): Likewise.
768 (search_struct_field): Likewise.
769 (search_struct_method): Likewise.
770 (find_method_list): Likewise.
771 (value_struct_elt_for_reference): Likewise.
772 (value_full_object): Likewise.
773 * jv-valprint.c (java_value_print): Use set_value_address.
774 * value.h (deprecated_value_address_hack): Remove.
775 (VALUE_ADDRESS): Remove.
776 (value_address): Declare.
777 (value_raw_address): Declare.
778 (set_value_address): Declare.
780 2009-05-27 Tom Tromey <tromey@redhat.com>
781 Thiago Jung Bauermann <bauerman@br.ibm.com>
782 Phil Muldoon <pmuldoon@redhat.com>
783 Paul Pluzhnikov <ppluzhnikov@google.com>
785 * python/python.c (_initialize_python): Call
786 gdbpy_initialize_types.
787 (GdbMethods): Add "lookup_type".
788 * python/python-value.c (value_object) <type>: New field.
789 (valpy_dealloc): Decref type.
790 (valpy_new): Initialize type.
791 (valpy_get_type): New function.
792 (value_to_value_object): Initialize type.
793 (valpy_cast): New function.
794 (value_object_getset): Add "type".
795 (value_object_methods): Add "cast".
796 * python/python-internal.h (type_to_type_object): Declare.
797 (type_object_to_type): Likewise.
798 (gdbpy_initialize_types): Likewise.
799 (gdbpy_lookup_type): Declare.
800 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
801 (SUBDIR_PYTHON_SRCS): Add python-type.c.
802 (python-type.o): New target.
803 * python/python-type.c: New file.
805 2009-05-27 Tom Tromey <tromey@redhat.com>
806 Thiago Jung Bauermann <bauerman@br.ibm.com>
807 Phil Muldoon <pmuldoon@redhat.com>
809 * python/python.c: Include objfiles.h, observer.h.
810 (gdbpy_auto_load): New global.
811 (gdbpy_current_objfile): Likewise.
812 (GDBPY_AUTO_FILENAME): New define.
813 (gdbpy_new_objfile): New function.
814 (gdbpy_get_current_objfile): Likewise.
815 (gdbpy_objfiles): Likewise.
816 (_initialize_python): Add "maint set auto-load". Call
817 gdbpy_initialize_objfile. Attach objfile observer.
818 (GdbMethods): New methods current_objfile, objfiles.
819 * python/python-objfile.c: New file.
820 * python/python-internal.h (objfile_to_objfile_object): Declare.
821 (objfpy_get_printers): Likewise.
822 (gdbpy_initialize_objfile): Likewise.
823 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
824 (SUBDIR_PYTHON_SRCS): Add python-objfile.c.
825 (python-objfile.o): New target.
827 2009-05-27 Pedro Alves <pedro@codesourcery.com>
829 * infrun.c (follow_exec): Clear the stop_requested flag.
830 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
833 2009-05-27 Aleksandar Ristovski <aristovski@qnx.com>
835 * nto-procfs.c (get_regset): Pass correct pointer.
837 2009-05-26 Doug Evans <dje@google.com>
839 * dwarf2read.c (follow_die_ref): Add comment.
840 (dwarf2_mark_helper): Tweak comment.
841 (dwarf2_mark): Move description to its proper place.
843 2009-05-25 Pierre Muller <muller@ics.u-strasbg.fr>
845 * procfs.c (procfs_wait): Add options parameter.
847 2009-05-24 Doug Evans <dje@google.com>
849 Global renaming of find_thread_pid to find_thread_ptid.
850 * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
851 * thread.c (find_thread_ptid): Renamed from find_thread_pid.
854 * infrun.c (follow_fork): Initialize new step_* locals
855 to avoid "may be used uninitialized" warnings.
857 2009-05-24 Pedro Alves <pedro@codesourcery.com>
859 * inflow.c (copy_terminal_info): Deep copy `run_terminal'.
861 2009-05-24 Pedro Alves <pedro@codesourcery.com>
863 * gdbthread.h (struct thread_info): New `pending_follow' field.
864 * thread.c (new_thread): New function.
865 (add_thread_silent): Use it.
866 * breakpoint.c (internal_breakpoint_number): New global, moved
868 (create_internal_breakpoint): ... this.
869 (clone_momentary_breakpoint): New.
870 * breakpoint.h (clone_momentary_breakpoint): Declare.
871 * infrun.c (nullify_last_target_wait_ptid): Move declaration
873 (pending_follow): Delete.
874 (follow_fork): Handle pending follow fork event here. Moved the
875 preserving of thread stepping state here.
876 (resume): Don't handle pending follow fork events here. Only
877 install the inferior's terminal modes if we're about to resume it.
878 (proceed): Handle possible pending follow fork events here.
879 (init_wait_for_inferior): No need to clear pending_follow anymore,
881 (handle_inferior_event): Adjust to per-thread `pending_follow'.
882 Call `follow_fork' to handle following the fork. If the
883 follow-fork is cancelled, stop stepping.
884 * linux-nat.c (linux_child_follow_fork): Adjust to per-thread
885 `pending_follow' events. Remove code that handled preserving the
886 thread stepping state.
887 * inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
888 * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
890 2009-05-24 Pierre Muller <muller@ics.u-strasbg.fr>
892 * symfile.c (add_shared_symbol_files_command): Remove
893 prototype and function.
894 (_initialize _symfile): Move "add-shared-symbol-files"
895 command and "assf" alias.
896 * windows-nat.c (_initialize_windows_nat): to here.
897 Change "add-shared-symbol-files" to alias.
899 * config/i386/cygwin.mh: Remove NAT_FILE.
900 * config/i386/mingw.mh: Remove NAT_FILE.
901 * config/i386/mingw64.mh: Remove NAT_FILE.
902 * config/i386/nm-cygwin.h: Remove file.
903 * config/i386/nm-cygwin64.h: Remove file.
905 2009-05-24 Hui Zhu <teawater@gmail.com>
907 * i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
908 I386_LINUX_RECORD_IOCTL_*,
909 I386_LINUX_RECORD_FCNTL_*) Removed.
910 (i386_linux_init_abi): Change size of record from macros to
913 2009-05-24 Hui Zhu <teawater@gmail.com>
915 * i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
916 * linux-record.c (record_linux_system_call): Ditto.
917 * linux-record.h (linux_record_tdep): Ditto.
919 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
921 Replace the savestring calls by xstrdup calls where possible.
922 * breakpoint.c (condition_command, set_raw_breakpoint)
923 (create_catchpoint, update_breakpoint_locations): Replace the
924 savestring calls by xstrdup calls where possible.
925 * buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
926 (record_producer): Likewise.
927 * coffread.c (coff_start_symtab, complete_symtab): Likewise.
928 * corefile.c (set_gnutarget): Likewise.
929 * dbxread.c (add_new_header_file): Likewise.
930 * demangle.c (set_demangling_command, set_demangling_style): Likewise.
931 * event-top.c (push_prompt, pop_prompt, command_line_handler)
932 (set_async_prompt): Likewise.
933 * infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
935 * language.c (set_language_command, _initialize_language): Likewise.
936 * linespec.c (decode_line_2): Likewise.
937 * rs6000-nat.c (add_vmap): Likewise.
938 * top.c (set_prompt, init_history, init_main): Likewise.
939 * tracepoint.c (stringify_collection_list): Likewise.
940 * varobj.c (varobj_create): Remove variable expr_len. Replace the
941 savestring calls by xstrdup calls where possible.
942 (value_of_root, c_name_of_variable, c_describe_child): Replace the
943 savestring calls by xstrdup calls where possible.
944 * xcoffread.c (complete_symtab): Likewise.
945 * cli/cli-script.c (build_command_line, define_command): Likewise.
946 * cli/cli-setshow.c (do_setshow_command): Likewise.
948 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
950 Remove already unreachable code.
951 * varobj.c (varobj_get_handle): Fix comment when error is called.
954 2009-05-23 Eli Zaretskii <eliz@gnu.org>
956 * README (`configure' options): Document GDB-specific options to
959 * symtab.c (skip_prologue_using_lineinfo): New function.
960 (find_function_start_sal): Use it to get to the first line of
961 function's body that has an entry in the lineinfo table.
963 * symmisc.c (dump_symtab): Switch the current language to
964 the language of the symtab we are dumping only if the symtab's
965 language is neither language_auto nor language_unknown.
967 * coffread.c (coff_symtab_read): Set language_minimal as the
968 language for the "_globals_" pseudo-file.
969 (process_coff_symbol): Set the symbol's language to the language
972 2009-05-22 Pedro Alves <pedro@codesourcery.com>
974 * target.h (struct section_table): Rename to ...
975 (struct target_section): ... this.
976 * exec.c: Adjust all references.
977 * exec.h: Adjust all references.
978 * nto-tdep.c: Adjust all references.
979 * nto-tdep.h: Adjust all references.
980 * ppc-linux-tdep.c: Adjust all references.
981 * rs6000-nat.c: Adjust all references.
982 * s390-tdep.c: Adjust all references.
983 * solib-darwin.c: Adjust all references.
984 * solib-frv.c: Adjust all references.
985 * solib-irix.c: Adjust all references.
986 * solib-null.c: Adjust all references.
987 * solib-osf.c: Adjust all references.
988 * solib-pa64.c: Adjust all references.
989 * solib-som.c: Adjust all references.
990 * solib-sunos.c: Adjust all references.
991 * solib-svr4.c: Adjust all references.
992 * solib-target.c: Adjust all references.
993 * solib.c: Adjust all references.
994 * solist.h: Adjust all references.
995 * symfile.c: Adjust all references.
996 * symfile.h: Adjust all references.
997 * target.c: Adjust all references.
999 2009-05-22 Hui Zhu <teawater@gmail.com>
1001 Add sys_fcntl argument interfaces to linux_record_tdep.
1003 * linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
1004 fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
1006 * i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
1007 I386_LINUX_RECORD_FCNTL_F_GETLK64,
1008 I386_LINUX_RECORD_FCNTL_F_SETLK64,
1009 I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
1010 of I386 Linux sys_fcntl arguments.
1011 (i386_linux_init_abi): Set macros values to linux_record_tdep.
1012 * linux-record.c (record_linux_system_call): Change to use
1013 the interface in linux_record_tdep in sys_fcntl and
1016 * linux-record.c (record_linux_system_call): Fix the process
1017 record build error about type in CYGWIN.
1019 2009-05-22 Pedro Alves <pedro@codesourcery.com>
1021 * inflow.c (kill_command): Delete left over static declaration.
1023 2009-05-22 Pedro Alves <pedro@codesourcery.com>
1025 * bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
1027 (struct section_closure): Delete.
1028 (add_to_section_table): Delete.
1029 (build_target_sections_from_bfd): Delete.
1030 (target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
1031 (target_bfd_reopen): Use build_section_table.
1032 * exec.c (xfer_memory): Move most code except for overlay
1033 debugging support from here...
1034 (section_table_xfer_memory): ... to this new function.
1035 (section_table_xfer_memory_partial): New.
1036 * exec.h (section_table_xfer_memory_partial): Declare.
1037 * bfd-target.h (build_target_sections_from_bfd): Delete
1040 2009-05-22 Pedro Alves <pedro@codesourcery.com>
1042 * remote.c (compare_sections_command): Don't declare exec_bfd.
1043 * tracepoint.c: Include "gdbcore.h".
1044 (remote_set_transparent_ranges): Don't declare exec_bfd.
1046 2009-05-21 Pedro Alves <pedro@codesourcery.com>
1048 * aix-thread.c (init_aix_thread_ops): Whitespace.
1050 2009-05-21 Pedro Alves <pedro@codesourcery.com>
1052 * dec-thread.c (dec_thread_wait): Add options parameter. Use it
1053 to call the to_wait method in the target beneath.
1054 * remote-m32r-sdi.c (m32r_wait): Add options parameter.
1056 2009-05-21 Joel Brobecker <brobecker@adacore.com>
1058 * aix-thread.c (aix_thread_wait): Add options parameter. Use it
1059 to call the to_wait method in the target_beneath.
1061 2009-05-21 Pedro Alves <pedro@codesourcery.com>
1063 * linux-nat.c (linux_nat_terminal_inferior)
1064 (linux_nat_terminal_ours): Don't check sync_execution.
1065 * remote.c (remote_terminal_inferior, remote_terminal_ours):
1066 Don't check sync_execution. Update comments.
1067 * target.c (target_terminal_inferior): New.
1068 * target.h (target_terminal_inferior): Delete macro, and declare
1070 * event-top.c (async_disable_stdin): Make idempotent. Don't give
1071 the target the terminal here.
1072 * inflow.c (terminal_ours_1): Don't return early without setting
1075 2009-05-21 Pedro Alves <pedro@codesourcery.com>
1077 * target.h (TARGET_WNOHANG): New.
1078 * target.c (target_wait): Add `options' argument. Adjust.
1079 (struct target_ops) <to_wait>: Add `options' argument.
1080 (target_wait): Add `options' argument.
1081 * infrun.c (wait_for_inferior): Pass 0 as options to
1082 target_wait (blocking wait).
1083 (fetch_inferior_event): Pass TARGET_WNOHANG as options to
1085 * fork-child.c (startup_inferior): Pass 0 as options to
1086 target_wait (blocking wait).
1087 * linux-nat.c (linux_nat_create_inferior): Remove async masking.
1088 (linux_nat_wait_1): Add `target_options' argument. Use it instead
1089 of checking on target_can_async_p.
1090 (linux_nat_wait): Add `target_options' argument. Adjust.
1091 * remote.c (remote_wait_ns): Add `options' argument. Adjust to
1092 check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
1093 (remote_wait_as): Add `options' argument. Adjust to check on
1094 TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
1095 a blocking wait, keep waiting until an interesting event comes
1097 (remote_wait): Add `options' argument. Don't loop here if the
1098 target is in async mode, and a blocking wait has been requested.
1100 * top.c (deprecated_target_wait_hook): Add `options' argument.
1101 * linux-thread-db.c (thread_db_wait): Add `options' argument, and
1102 pass it down to the layer beneath.
1103 * inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
1104 * record.c (record_beneath_to_wait): Add `options' argument.
1105 (record_wait): Add `options' argument, and pass it down to the
1107 * bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
1108 * darwin-nat.c (darwin_wait): Likewise.
1109 * defs.h (deprecated_target_wait_hook): Likewise.
1110 * gnu-nat.c (gnu_wait): Add `options' argument.
1111 * go32-nat.c (go32_wait): Likewise.
1112 * hpux-thread.c (hpux_thread_wait): Add `options' argument, and
1113 pass it down to the layer beneath.
1114 * inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
1115 * monitor.c (monitor_wait): Likewise.
1116 * nto-procfs.c (procfs_wait): Likewise.
1117 * remote-mips.c (mips_wait): Add `options' argument.
1118 * remote-sim.c (gdbsim_wait): Likewise.
1119 * rs6000-nat.c (rs6000_wait): Add `options' argument.
1120 * sol-thread.c (sol_thread_wait): Add `options' argument, and pass
1121 it down to the layer beneath.
1122 * spu-linux-nat.c (spu_child_wait): Add `options' argument.
1123 * windows-nat.c (windows_wait): Likewise.
1124 * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
1126 2009-05-21 Pedro Alves <pedro@codesourcery.com>
1128 * mi/mi-interp.c (mi_on_resume): Account for whole process
1131 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1133 * m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.
1135 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1137 * dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.
1139 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1141 Fix parsing DW_AT_const_value using DW_FORM_string.
1142 * dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.
1144 2009-05-20 Joel Brobecker <brobecker@adacore.com>
1146 * aix-thread.c (giter_count): Do not count the main thread.
1147 (giter_accum): Do not include the main thread.
1149 2009-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1151 Remove the PROT parameter from openp.
1152 * source.c (openp): Remove the parameter PROT. Assertion check MODE.
1153 defs.h (openp): Update the prototype.
1154 Update all the openp callers.
1156 2009-05-19 Pedro Alves <pedro@codesourcery.com>
1158 * inflow.c (kill_command): Moved to infcmd.c.
1159 (_initialize_inflow): Don't add the "kill" command or clear
1161 * infcmd.c (kill_command): Moved here from inflow.c.
1162 (_initialize_infcmd): Add the "kill" command here.
1164 2009-05-19 Pedro Alves <pedro@codesourcery.com>
1166 * fork-child.c: Don't include frame.h. Include terminal.h.
1167 (fork_inferior): Call new_tty_postfork after forking adn adding
1168 the child to the inferior list.
1169 * inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
1171 * inflow.c (struct terminal_info): Remove const qualifier from
1172 `run_terminal' field.
1173 (inferior_thisrun_terminal): Tweak comment.
1174 (inflow_inferior_exit): Release the `run_terminal' field.
1175 (copy_terminal_info): New function.
1176 (new_tty_postfork): New function.
1177 * terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
1178 (copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
1179 * inf-ptrace.c: Include terminal.h.
1180 (inf_ptrace_follow_fork): Copy the parent's terminal info to the
1182 * linux-nat.c: Include terminal.h.
1183 (linux_child_follow_fork): Copy the parent's terminal info to the
1185 * inf-ttrace.c: Include terminal.h.
1186 (inf_ttrace_follow_fork): Copy the parent's terminal info to the
1189 2009-05-19 Pedro Alves <pedro@codesourcery.com>
1191 * breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
1192 (update_global_location_list): Use gdbarch_has_global_breakpoints
1193 instead of gdbarch_has_global_solist and
1194 target_supports_multi_process.
1195 * dicos-tdep.c (dicos_init_abi): Set
1196 gdbarch_has_global_breakpoints.
1197 * gdbarch.sh (has_global_solist): Update comment.
1198 (has_global_breakpoints): New.
1199 * remote.c (remote_start_remote): Use
1200 gdbarch_has_global_breakpoints instead of
1201 gdbarch_has_global_solist.
1202 * target.c (target_detach): Use gdbarch_has_global_breakpoints
1203 instead of gdbarch_has_global_solist.
1204 * infcmd.c (attach_command): Use gdbarch_has_global_solist instead
1205 of target_supports_multi_process.
1207 2009-05-18 Paul Pluzhnikov <ppluzhnikov@google.com>
1209 * objc-lang.c (find_methods): Plug a small memory leak.
1211 2009-05-18 Pedro Alves <pedro@codesourcery.com>
1213 * solib-svr4.c: Include observer.h.
1214 (debug_base, debug_loader_offset_p, debug_loader_offset)
1215 (debug_loader_name, main_lm_addr): Move these globals...
1216 (struct svr4_info): ... into this new structure.
1217 (svr4_info_p): New typedef.
1218 (svr4_info): New global.
1219 (get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
1221 (locate_base, solib_svr4_r_map, solib_svr4_r_brk)
1222 (solib_svr4_r_ldsomap): Add svr4_info argument. Adjust to
1224 (open_symbol_file_object): Adjust to per-inferior svr4.
1225 (svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
1227 (enable_break): Add svr4_info argument. Adjust to per-inferior
1229 (enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
1230 Adjust to per-inferior svr4.
1231 (_initialize_svr4_solib): Install the solib_svr4_inferior_exit
1234 2009-05-18 Pedro Alves <pedro@codesourcery.com>
1236 * linux-nat.h (linux_proc_get_tgid): Declare.
1237 * linux-nat.c (linux_proc_get_tgid): New.
1238 * linux-thread-db.c (struct thread_db_info): New field
1239 `need_stale_parent_threads_check'.
1240 (add_thread_db_info): Set it.
1241 (find_new_threads_callback): Ignore stale fork parent threads.
1242 (thread_db_resume): New.
1243 (init_thread_db_ops): Install thread_db_resume.
1245 2009-05-18 Pedro Alves <pedro@codesourcery.com>
1247 * fork-child.c (fork_inferior): Only reset the thread list if this
1248 is the first inferior.
1249 (startup_inferior): If the target support multi-process, tell it
1250 to resume only the new process.
1251 * linux-nat.c (num_lwps): Delete global.
1252 (purge_lwp_list): New function.
1253 (num_lwps): New function.
1254 (add_lwp, delete_lwp): Adjust.
1256 (iterate_over_lwps): Add filter argument. Handle it.
1257 (linux_nat_attach): Remove FIXME note.
1258 (linux_nat_detach): Adjust to iterate over threads of the inferior
1259 we're detaching from. Adjust to num_lwps being a function. Don't
1260 assume the head of the lwp list is the main thread of the process
1261 we're detaching from. Don't destroy the LWP list.
1262 (resume_callback): Add debug output.
1263 (linux_nat_resume): Handle resuming a single inferior. Allow a
1264 wildcard resume in non-stop mode.
1265 (linux_handle_extended_wait): Don't assume inferior_ptid is the
1266 correct inferior of the parent LWP.
1267 (status_callback): Also check lp->waitstatus.
1268 (select_event_lwp): Add new filter parameter. Handle it.
1269 (linux_nat_filter_event): Adjust to num_lwps being a function.
1270 (linux_nat_wait_1): When adding the first lwp of the inferior, use
1271 an is_lwp check instead of checking for the number of lwps.
1272 (linux_nat_wait_1): Handle waiting for a specific tgid. Handle
1273 pending process exit statuses.
1274 (linux_nat_mourn_inferior): Don't destroy all the LWP info.
1275 Instead delete LWPs of the inferior that we're mourning. Don't
1276 unregister from the event loop here.
1277 (linux_nat_pid_to_str): Use `num_lwps'.
1278 (linux_nat_make_corefile_notes): Adjust to walk over lwps of a
1280 (linux_nat_is_async_p): Check if async was masked out.
1281 (linux_multi_process): New global.
1282 (linux_nat_supports_multi_process): New.
1283 (linux_nat_stop_lwp): Remove LWP filtering. It is done by the
1285 (linux_nat_stop): Adjust to make iterate_over_lwps itself do the
1287 (linux_nat_close): New.
1288 (linux_nat_add_target): Register linux_nat_close and
1289 linux_nat_supports_multi_process.
1290 * linux-nat.h (iterate_over_lwps): Add filter argument.
1291 * linux-thread-db.c (thread_db_handle): Delete.
1292 (proc_handle, thread_agent, td_init_p, td_ta_new_p)
1293 (td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
1294 (td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
1295 (td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
1296 (td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
1297 longer globals, moved to...
1298 (struct thread_db_info): ... this new structure.
1299 (thread_db_list): New.
1300 (add_thread_db_info, get_thread_db_info, delete_thread_db_info):
1302 (have_threads_callback): Filter out threads of all inferiors but
1303 the one specified by the ARGS argument.
1304 (have_threads): Add ptid argument specifying the inferior we're
1305 interested in. Handle it.
1306 (struct thread_get_info_inout): New.
1307 (thread_get_info_callback, thread_from_lwp): Adjust to use it.
1308 (thread_db_attach_lwp): Check that inferior of the passed in
1309 thread is using thread-db. Adjust.
1310 (enable_thread_event): Remove thread_agent parameter. Instead,
1311 get it from the per-inferior thread-db info.
1312 (dladdr_to_soname): Move higher up.
1313 (enable_thread_event_reporting): Adjust to use per-inferior
1315 (try_thread_db_load_1): Replace `handle' parameter by a
1316 thread_db_info parameter. Adjust to use per-inferior thread-db
1318 (try_thread_db_load): Adjust to use per-inferior thread-db info.
1319 (thread_db_load, disable_thread_event_reporting): Ditto.
1320 (check_for_thread_db): Remove conditional reporting of which
1321 libthread_db is in use.
1322 (thread_db_new_objfile): Add comment about inferior_ptid.
1323 (attach_thread): Adjust to use per-inferior thread-db info.
1324 (thread_db_detach): Adjust to use per-inferior thread-db info.
1325 Remove thread event breakpoints of the current inferior. Only
1326 unpush the thread-db target if there are no more processes using
1328 (check_event): Adjust to use per-inferior thread-db info.
1329 (thread_db_wait): Adjust to use per-inferior thread-db info. Only
1330 unpush the thread-db target if there are no more processes using
1332 (thread_db_mourn_inferior): Adjust to use per-inferior thread-db
1333 info. Mark breakpoints of the current inferior out before
1334 deleting them. Only unpush the thread-db target if there are no
1335 more processes using it.
1336 (find_new_threads_callback): Adjust to use per-inferior thread_db
1338 (thread_db_find_new_threads_1): Add new ptid argument. Adjust to
1339 use per-inferior thread-db info.
1340 (thread_db_find_new_threads): Adjust to use per-inferior thread-db
1342 (thread_db_get_thread_local_address): Adjust.
1343 (thread_db_get_ada_task_ptid): Adjust.
1344 * inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
1345 if there no more processes left to debug.
1346 * thread.c (set_running, set_executing): Handle resuming all
1347 threads of a single inferior.
1348 * mi/mi-interp.c (mi_output_running_pid): New.
1349 (mi_inferior_count): New.
1350 (mi_on_resume): For backwards compatibility, if resuming all
1351 threads of an inferior, and there is only one inferior, output
1354 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
1356 * ada-lang.c (ada_find_any_type): Move check for primitive types ...
1357 (to_fixed_range_type): ... to here.
1359 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
1361 * ada-lang.c (desc_data_type): Remove, replace by ...
1362 (desc_data_target_type): ... this.
1363 (thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
1364 (ada_is_array_descriptor_type): Likewise.
1365 (ada_type_of_array): Likewise.
1366 (ada_coerce_to_simple_array_type): Likewise.
1367 (ada_array_element_type): Likewise.
1369 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
1371 * ada-valprint.c (ada_val_print_1): Use val_print_string to print
1372 result of ada_vax_float_print_function inferior call.
1374 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
1376 * ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
1377 avoid creating a dummy value.
1379 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
1381 * p-valprint.c (pascal_val_print): Use extract_typed_address
1382 to extract reference value.
1384 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
1386 * doublest.c (NAN): Remove unused define.
1387 (extract_floating_by_length, deprecated_extract_floating): Remove.
1388 (store_floating_by_length, deprecated_store_floating): Remove.
1389 (extract_typed_floating): Do not call extract_floating_by_length.
1390 (store_typed_floating): Do not call store_floating_by_length.
1391 (convert_typed_floating): Remove redundant assertions.
1392 * doublest.h (deprecated_extract_floating): Remove.
1393 (deprecated_store_floating): Remove.
1394 * sh64-tdep.c (sh64_register_convert_to_raw): Call
1395 extract_typed_floating instead of deprecated_extract_floating.
1397 2009-05-18 Jon Beniston <jon@beniston.com>
1399 * MAINTAINERS: Add lm32 target.
1400 * Makefile.in: Add lm32 dependencies.
1401 * NEWS: Indicate lm32 is a new target.
1402 * configure.tgt: Add lm32 targets.
1403 * lm32-tdep.c: New file.
1405 2009-05-18 Pedro Alves <pedro@codesourcery.com>
1407 * corelow.c (core_open): Flush the register cache before doing
1408 anything with registers.
1410 2009-05-18 Pedro Alves <pedro@codesourcery.com>
1412 * inflow.h (our_process_group): Remove declaration.
1413 (inferior_process_group): Delete global variable declaration.
1414 (inferior_process_group): New function declaration.
1415 * inflow.c: Include observer.h.
1416 (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
1418 (struct terminal_info): New struct.
1419 (our_terminal_info): New global.
1420 (inferior_process_group): New function.
1421 (inferior_thisrun_terminal): Extend description comment.
1422 (gdb_has_a_terminal): Adjust to write to our_terminal_info fields
1424 (terminal_init_inferior_with_pgrp): Adjust to per-inferior
1426 (terminal_inferior): Ditto.
1427 (terminal_ours_1): Ditto.
1428 (inflow_new_inferior, inflow_inferior_exit): New functions.
1429 (child_terminal_info): Adjust to per-inferior terminal settings.
1430 (osig_set): New global.
1431 (set_sigint_trap): Adjust to per-inferior terminal settings. Set
1432 or clear `osig_set' accordingly.
1433 (clear_sigint_trap): Check `osig_set' to decide wheater to restore
1434 SIGINT handler, instead of checking the current inferior (which
1436 (_initialize_inflow): Attach inflow_new_inferior and
1437 inflow_inferior_exit to the "new_inferior" and "inferior_exit"
1438 notifications, respectively.
1439 * inferior.h (struct terminal_info): Forward declare.
1440 (struct inferior): Add `terminal_info' field.
1441 * inferior.c (delete_inferior_1): Notify the inferior_exit
1442 observers before removing the inferior from the lists and deleting
1444 * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
1445 a function instead of a variable. Adjust.
1446 * procfs.c (procfs_stop): Ditto.
1448 2009-05-17 Pedro Alves <pedro@codesourcery.com>
1450 * infrun.c (handle_inferior_event): When handling a
1451 TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
1453 * linux-nat.c (linux_child_follow_fork): Only detach breakpoints
1454 from the child if vforking.
1455 * inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
1456 breakpoints from the child here.
1458 2009-05-17 Pedro Alves <pedro@codesourcery.com>
1460 * infrun.c (pending_follow): Remove execd_pathname member.
1461 (resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
1462 (handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
1463 event, don't copy `execd_pathname' to pending_follow, use the
1464 event copy instead. Release `execd_pathname' once done with
1467 * infrun.c (pending_follow): Remove mention of exec events.
1469 2009-05-17 Hui Zhu <teawater@gmail.com>
1471 * i386-tdep.c (i386_process_record): Make it extern.
1472 (i386_gdbarch_init): Don't call set_gdbarch_process_record
1474 * i386-tdep.h (i386_process_record): Declare.
1475 * i386-linux-tdep.c (i386_linux_init_abi): Call
1476 set_gdbarch_process_record.
1478 2009-05-17 Vladimir Prus <vladimir@codesourcery.com>
1480 Always report varobj as changed when in_scope attribute changes.
1482 * varobj.c (install_new_value): If non-NULL-ness of value
1485 2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
1487 * NEWS: Mention set/show libthread-db-search-path.
1488 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
1489 (LIBTHREAD_DB_SO): Moved from linux-thread-db.c
1490 * linux-thread-db.c (libthread_db_search_path): New setting.
1491 (thread_db_handle): New variable (replaces using_thread_db).
1492 (try_thread_db_load_1): New function.
1493 (try_thread_db_load, thread_db_load_search): Likewise.
1494 (dladdr_to_soname): Likewise.
1495 (thread_db_load): Iterate over possibly multiple libthread_db's.
1496 (check_for_thread_db): Attempt to load new libthread_db.
1497 (thread_db_detach, thread_db_wait): Unload libthread_db.
1498 (thread_db_mourn_inferior): Likewise.
1499 (_initialize_thread_db): Add new libthread-db-search-path option.
1500 Defer loading of libthread_db to check_for_thread_db.
1501 * solib.c (libpthread_name_p): New function.
1502 (libpthread_solib_p): Call it.
1503 * solib.h (libpthread_name_p): New prototype.
1505 2009-05-15 Pierre Muller <muller@ics.u-strasbg.fr>
1507 * MAINTAINERS: Update my email address.
1509 2009-05-14 Paul Pluzhnikov <ppluzhnikov@google.com>
1511 * breakpoint.h: Add breakpoint_re_set_objfile prototype.
1512 * breakpoint.c (create_overlay_event_breakpoint): Renamed
1513 from create_overlay_event_breakpoint_1, old
1514 create_overlay_event_breakpoint deleted.
1515 (breakpoint_re_set_objfile): Don't rescan all objfiles
1517 (breakpoint_re_set): New function.
1518 * symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
1519 instead of breakpoint_re_set.
1520 * objfiles.c (objfile_relocate): Likewise.
1522 2009-05-14 Joel Brobecker <brobecker@adacore.com>
1524 * gdbarch.sh: Add comment documenting the target_gdbarch global.
1525 gdbarch.h does NOT need to be regenerated as the corresponding
1526 change has already been made in a previous commit.
1528 2009-05-14 Pierre Muller <muller@ics.u-strasbg.fr>
1530 Remove all i386 debug register low level macros in config nm files.
1531 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
1532 (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
1533 (I386_USE_GENERIC_WATCHPOIINTS): Remove.
1535 * i386-nat.h: New file (adapted from config/i386/nm-i386.h).
1536 (struct i386_dr_low_type): New type.
1537 (i386_dr_low): New global variable.
1538 * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
1539 (i386_insert_aligned_watchpoint): Replace i386 dr low macros by
1540 i386_dr_low struct variable fields.
1541 (i386_remove_aligned_watchpoint): Likewise.
1542 (i386_stopped_data_address): Likewise.
1543 (i386_stopped_by_hwbp): Likewise.
1544 (show_debug_regs_command_added): New static variable.
1545 (add_show_debug_regs_command): New static function.
1546 (i386_use_watchpoints): Call add_show_debug_regs_command if not done.
1547 (i386_set_debug_register_length): New function.
1548 (_initialize_i386_nat): Delete.
1550 * amd64-linux-nat.c: Include "i386-nat.h".
1551 (amd64_linux_dr_set_control): Change to static.
1552 (amd64_linux_dr_get_status): Change to static.
1553 (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
1554 (_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
1556 * go32-nat.c: Include "i386-nat.h".
1557 (go32_set_addr): Change to static.
1558 (go32_set_dr7): Change to static. Change arg type to unisgned long.
1559 (go32_get_dr6): Change to static. Change return type to unisnged long.
1560 (init_go32_ops): Set i386_dr_low variable fields.
1561 * i386-linux-nat.c: Include "i386-nat.h".
1562 (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
1563 (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
1564 (_initialize_i386_linux_nat): Set i386_dr_low variable fields.
1565 * i386bsd-nat.h: Declare functions used for
1566 i386_dr_low fields in i386fbsd-nat.c.
1567 * i386fbsd-nat.c: Include "i386-nat.h".
1568 (_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
1569 * windows-nat.c: Include "i386-nat.h".
1570 (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
1572 (cygwin_get_dr6): Change return type to unisnged long.
1573 (cygwin_set_dr7): Change arg type to unisgned long.
1574 (init_windows_ops): Set i386_dr_low function fields.
1576 * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call
1577 i386_set_debug_register_length.
1578 * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.
1580 * config/i386/nm-cygwin.h: Remove all I386_* macros.
1581 * config/i386/nm-cygwin64.h: Likewise.
1582 * config/i386/nm-fbsd.h: Likewise.
1583 * config/i386/nm-linux.h: Likewise.
1584 * config/i386/nm-i386.h: Remove completely.
1585 * config/i386/nm-go32.h: Remove completely.
1586 * config/i386/nm-linux64.h: Remove completely.
1587 * config/i386/go32.mh (NAT_FILE): Remove entry.
1588 * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
1590 2009-05-14 Jon Beniston <jon@beniston.com>
1592 * MAINTAINERS: Add Jon Beniston to write after approval list.
1594 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
1596 * objc-lang.c (objc_objfile_data): New variable.
1597 (find_methods): Skip objfiles without Obj-C methods.
1598 (_initialize_objc_lang): New function.
1600 2009-05-13 Joel Brobecker <brobecker@adacore.com>
1602 * c-lang.c (print_wchar): Remove unnecessary cast.
1604 2009-05-12 Jim Blandy <jimb@red-bean.com>
1606 * MAINTAINERS: Remove self as m32c target maintainer.
1608 2009-05-12 Pedro Alves <pedro@codesourcery.com>
1610 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
1611 * command.h (deprecated_add_set_cmd): Delete declaration.
1612 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
1613 'set debug gnu-nat' and 'show debug gnu-nat'.
1614 * i386-nat.c (_initialize_i386_nat): Replace 'maint
1615 show-debug-registers' with 'maint set show-debug-registers' and
1616 'maint show show-debug-registers'.
1617 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
1618 show-debug-registers' with 'maint set show-debug-registers' and
1619 'maint show show-debug-registers'.
1621 2009-05-12 Joel Brobecker <brobecker@adacore.com>
1623 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
1624 pushing it on the output obstack.
1626 2009-05-11 Joel Brobecker <brobecker@adacore.com>
1628 Fix internal error on breaking at a multi-locations caller source line.
1629 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
1630 command with no parameters.
1632 2009-05-11 Pedro Alves <pedro@codesourcery.com>
1634 * linux-nat.c (enum sigchld_state): Delete.
1635 (linux_nat_async_events_state): Delete.
1636 (struct waitpid_result): Delete.
1637 (waitpid_queue): Delete.
1638 (queued_waitpid_1): Delete.
1639 (async_file_flush): New.
1640 (queued_waitpid, push_waitpid): Delete.
1641 (async_file_mark): New.
1642 (drain_queued_events): Delete.
1643 (my_waitpid): Remove locally queued events handling.
1644 (linux_test_for_tracefork): Upjust.
1645 (linux_child_follow_fork): Ditto.
1646 (sync_sigchld_action): Delete.
1647 (blocked_mask): Reinstate.
1648 (async_sigchld_action): Rename to...
1649 (sigchld_action): ... this.
1650 (block_child_signals): New.
1651 (restore_child_signals_mask): New.
1652 (lin_lwp_attach_lwp): Adjust.
1653 (linux_nat_create_inferior): Ditto.
1654 (linux_nat_attach): Also use lp->status in async mode.
1655 (get_pending_status): Don't use queued_waitpid.
1656 (linux_nat_detach): Don't drain locally queued events.
1657 (linux_nat_resume): Allow pending wait statuses stored lp->status
1658 in async mode. If returning early due to a pending event,
1659 re-register the event source.
1660 (stop_wait_callback): Allow pending wait statuses stored
1661 lp->status in async mode.
1662 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
1663 (linux_nat_wait): Rename to ...
1664 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
1665 lp->status in async mode. Always add WNOHANG to the waitpid
1666 options in async mode.
1667 (linux_nat_wait): New.
1668 (kill_callback): Don't drain locally queued events.
1669 (sigchld_handler): Rewrite.
1670 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
1671 refer to "set target-async".
1672 (linux_nat_async_mask): If in non-stop, and re-enabling async
1673 mode, re-register the target event source in the event loop.
1674 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
1675 (get_pending_events, async_sigchld_handler)
1676 (linux_nat_async_events): Delete.
1677 (handle_target_event): New.
1678 (linux_nat_async_file_handler): Delete.
1679 (linux_async_pipe): New.
1680 (linux_nat_async): Only re-register in the event loop if not
1681 registered yet. Always notify the event-loop once if enabling the
1683 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
1684 lp->status, not in the locally queued event list.
1685 (linux_nat_stop): Don't mask out async event handling.
1686 (linux_nat_setup_async): Delete.
1687 (_initialize_linux_nat): Adjust.
1688 (lin_thread_get_thread_signals): blocked_mask is global again.
1691 2009-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
1693 Unify target macros.
1695 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
1696 (target_stoppped_by_watchpoint): New macro.
1697 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
1698 (target_have_steppable_watchpoint): New macro.
1699 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
1700 (target_have_continuable_watchpoint): New macro.
1701 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
1702 (target_can_use_hardware_watchpoint): New macro.
1703 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
1704 (target_region_ok_for_hw_watchpoint): New macro.
1706 * breakpoint.c (update_watchpoint): Use new macros.
1707 (bpstat_alloc): Likewise.
1708 (create_breakpoint): Likewise.
1709 (watch_command_1): Likewise.
1710 (can_use_hardware_watchpoint): Likewise.
1711 (do_enable_breakpoint): Likewise.
1712 * infrun.c (handle_inferior_event): Adapt to new macros.
1713 * mips-tdep.c (mips_gdbarch_init): Update comments.
1714 * procfs.c (procfs_set_watchpoint): Update comment.
1715 (procfs_insert_watchpoint): Adapt to new macros.
1716 * remote-m32r-sdi.c (m32r_stop):
1717 * remote-mips.c (mips_remove_breakpoint):
1718 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
1719 (debug_to_stopped_by_watchpoint): Likewise.
1722 2009-05-10 Pierre Muller <muller@ics.u-strasbg.fr>
1724 * src/gdb/target.h: Remove all tests for already defined
1725 macros. All macros defined here should not be set in config
1728 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
1730 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
1731 (have_ptrace_getsetfpregs): Likewise.
1732 fetch_all_gp_regs): New function.
1733 (fetch_gp_regs): New function.
1734 (fetch_all_fp_regs): Likewise.
1735 (fetch_fp_regs): New function.
1736 (fetch_ppc_registers): Using the new methods to fetch general-
1737 purpose and floating-pointer registers.
1738 (store_all_gp_regs): New function.
1739 (store_gp_regs): Likewise.
1740 (store_all_fp_regs): New function.
1741 (store_fp_regs): Likewise.
1742 (store_ppc_registers): Using the new methods to store general-
1743 purpose and floating-pointer registers.
1745 2009-05-08 Doug Evans <dje@google.com>
1747 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
1749 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
1751 * MAINTAINERS (Write After Approval): Add self.
1753 2009-05-07 Joel Brobecker <brobecker@adacore.com>
1755 * gdbarch.h (target_gdbarch): Add comment documenting this global.
1757 2009-05-06 Joel Brobecker <brobecker@adacore.com>
1759 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
1761 * configure: Regenerate.
1763 2009-05-06 Joel Brobecker <brobecker@adacore.com>
1765 * utils.c: Add include of gdb_usleep.h.
1766 (defaulted_query): Detect false EOF conditions that happen
1767 on terminals opened with the O_NONBLOCK flag when there is
1770 2009-05-06 Pedro Alves <pedro@codesourcery.com>
1772 * inferior.c (add_inferior): Move observer_notify_new_inferior
1774 (add_inferior_silent): ... here.
1776 2009-05-06 Pierre Muller <muller@ics.u-strasbg.fr>
1777 Pedro Alves <pedro@codesourcery.com>
1779 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
1780 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
1782 (procfs_stopped_by_watchpoint): Made static, ptid argument
1784 (_initialize_procfs): Register new watchpoint related target
1786 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
1787 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
1788 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
1789 (target_insert_watchpoint, target_remove_watchpoint): Delete.
1790 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
1792 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
1793 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
1794 (target_insert_watchpoint, target_remove_watchpoint): Delete.
1795 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
1797 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
1798 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
1799 (target_insert_watchpoint, target_remove_watchpoint): Delete.
1800 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
1803 2009-05-06 Hui Zhu <teawater@gmail.com>
1805 * i386-tdep.c (i386_process_record): Change bzero to memset.
1807 2009-05-06 Hui Zhu <teawater@gmail.com>
1809 * NEWS: Add item for process record and replay.
1811 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
1813 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
1815 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
1817 * inferior.h (read_pc, write_pc): Remove.
1818 * regcache.c (read_pc, write_pc): Remove.
1820 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
1822 (handle_inferior_event): Use regcache_read_pc instead of read_pc
1823 when determining value of stop_pc. Replace subsequent uses of
1824 read_pc by inspecting already-retrieved stop_pc value.
1825 (keep_going): Use regcache_read_pc instead of read_pc.
1827 * breakpoint.c (watchpoint_check): Use current frame architecture
1828 and PC instead of current_gdbarch and read_pc ().
1829 * tracepoint.c (set_traceframe_context): Replace PC argument
1830 with FRAME argument.
1831 (trace_start_command, finish_tfind_command): Update calls.
1832 (finish_tfind_command): Compare frame IDs to identify transitions
1834 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
1835 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
1836 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
1837 of read_pc and write_pc.
1838 (store_register): Make regcache argument non-const. Update call
1839 to exec_one_dummy_insn.
1841 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
1842 * infcmd.c (post_create_inferior): Likewise.
1843 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
1844 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
1845 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
1846 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
1847 * linux-fork.c (fork_load_infrun_state): Likewise.
1848 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
1849 * record.c (record_wait): Likewise.
1850 * procfs.c (procfs_wait): Likewise.
1851 * remote-mips.c (common_open, mips_wait): Likewise.
1852 * remote-m32r-sdi.c (m32r_resume): Likewise.
1854 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
1855 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
1856 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
1857 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
1858 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
1860 * solib-darwin.c: Include "regcache.h".
1861 * solib-pa64.c: Include "regcache.h".
1862 * solib-svr4.c: Include "regcache.h.".
1864 * symfile.c: Do not mention read_pc or write_pc in comments.
1865 * dink32-rom.c: Likewise.
1866 * m32r-rom.c: Likewise.
1867 * mips-tdep.c: Likewise.
1869 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
1871 * fork-child.c (startup_inferior): Move setting stop_pc ...
1872 * infcmd.c (post_create_inferior): ... to here.
1874 2009-05-04 Michael Snyder <msnyder@vmware.com>
1876 * NEWS: Add item for reverse debugging commands.
1878 2009-05-04 Pedro Alves <pedro@codesourcery.com>
1880 * go32-nat.c (go32_stop): Delete.
1881 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
1882 (go32_create_inferior): Don't call go32_stop or
1884 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
1886 (init_go32_ops): Don't register go32_stop.
1888 2009-05-02 Eli Zaretskii <eliz@gnu.org>
1890 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
1893 * infcall.c (find_function_addr): Avoid compiler warnings for
1896 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1898 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
1899 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
1901 2009-05-01 Doug Evans <dje@google.com>
1903 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
1906 2009-05-01 Eli Zaretskii <eliz@gnu.org>
1908 * record.c (_initialize_record): Reformat and clarify doc strings
1909 for stop-at-limit and insn-number-max.
1911 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
1913 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1915 Make specifiable the make_function_type type memory ownership.
1916 * gdbtypes.c (make_function_type): New parameter `objfile', use it
1917 explicitely instead of TYPE-initialized removed local variable
1918 `objfile'. Describe `objfile' it in the function comment.
1919 (lookup_function_type): Update make_function_type callers.
1920 * gdbtypes.h (make_function_type): Update the prototype.
1921 * jv-lang.c (java_link_class_type): Update make_function_type callers.
1922 * dwarf2read.c (read_subroutine_type): Likewise.
1923 * stabsread.c (read_type): Likewise.
1925 2009-05-01 Eli Zaretskii <eliz@gnu.org>
1927 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
1928 printing a bogus "Thread <main>".
1929 (go32_thread_alive): Don't return 1 for null_ptid.
1931 * i386-tdep.c (i386_go32_init_abi): Override the number of
1932 registers due to non-support of SSE.
1934 2009-04-30 Anthony Green <green@moxielogic.com>
1936 * configure.tgt: Link the moxie simulator in with gdb.
1938 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
1940 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
1943 2009-04-30 Hui Zhu <teawater@gmail.com>
1944 Michael Snyder <msnyder@vmware.com>
1946 I386 Linux process record and replay support.
1948 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
1949 This struct has the argument for the function
1950 "record_linux_system_call".
1951 (i386_linux_intx80_sysenter_record): New function. Parse the
1952 system call instruction and call function
1953 "record_linux_system_call" to record execute log.
1954 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
1955 Set "i386_linux_intx80_sysenter_record" to
1956 "i386_intx80_record" and "i386_sysenter_record".
1958 2009-04-30 Hui Zhu <teawater@gmail.com>
1959 Michael Snyder <msnyder@vmware.com>
1961 I386 architecture process record and replay support.
1963 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
1964 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
1966 (aflag, dflag, override, modrm, mod, reg, rm, ot,
1967 i386_record_pc): New variables. Ditto.
1968 (i386_record_modrm, i386_record_lea_modrm_addr,
1969 i386_record_lea_modrm): New functions. Ditto.
1970 (i386_process_record): New function. Parse the instruction in
1971 address "addr" and record the values of registers and memory
1972 that will be changed by this instruction.
1973 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
1974 "process_record" interface.
1975 * i386-tdep.h (gdbarch_tdep): New function pointers
1976 "i386_intx80_record" and "i386_sysenter_record" that point to
1977 the function that can record "intx80" and "sysenter" execute
1980 2009-04-30 Hui Zhu <teawater@gmail.com>
1981 Michael Snyder <msnyder@vmware.com>
1983 * infrun.c (use_displaced_stepping): Return false if process
1984 record and replay target is used.
1985 (proceed): Call function "record_not_record_set" if pocess
1986 record and replay target is used.
1988 2009-04-30 Hui Zhu <teawater@gmail.com>
1989 Michael Snyder <msnyder@vmware.com>
1991 Linux process record and replay support.
1993 * Makefile.in (ALLDEPFILES): Add linux-record.c.
1994 (ALL_TARGET_OBS): Add linux-record.o.
1995 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
1996 (i[34567]86-*-linux*): Add linux-record.o.
1997 * linux-record.c, linux-record.h: New file.
1999 2009-04-30 Hui Zhu <teawater@gmail.com>
2000 Michael Snyder <msnyder@vmware.com>
2002 Process record and replay target.
2004 * Makefile.in (SFILES): Add record.c.
2005 (COMMON_OBS): Add record.o.
2006 * record.c, record.h: New file.
2008 2009-04-30 Hui Zhu <teawater@gmail.com>
2009 Michael Snyder <msnyder@vmware.com>
2011 * target.h (strata): New stratum "record_stratum".
2013 2009-04-30 Hui Zhu <teawater@gmail.com>
2014 Michael Snyder <msnyder@vmware.com>
2016 GDBARCH interface for process record and replay.
2018 * gdbarch.sh (process_record): This interface point to the
2019 function that records the inferior execute log.
2021 2009-04-29 Doug Evans <dje@google.com>
2023 * i386-nat.c (child_post_startup_inferior): Delete, unused.
2025 2009-04-29 Pedro Alves <pedro@codesourcery.com>
2027 * breakpoint.c (print_exception_catchpoint): Access `b' directly
2028 instead of `b->loc->owner'.
2029 (print_mention_exception_catchpoint): Ditto.
2031 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2033 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
2035 2009-04-27 Tom Tromey <tromey@redhat.com>
2037 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
2039 2009-04-27 Jerome Guitton <guitton@adacore.com>
2041 * symtab.c (append_exact_match_to_sals): New function, extracted
2042 from expand_line_sal.
2043 (expand_line_sal): Use append_exact_match_to_sals to append exact
2044 matches. If none found, append all best items.
2046 2009-04-27 Jerome Guitton <guitton@adacore.com>
2048 * main.c (captured_main): Move gdbinit lookups after gdb_init.
2050 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
2053 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
2054 (read_func_scope): Call inherit_abstract_dies.
2056 2009-04-25 Eli Zaretskii <eliz@gnu.org>
2058 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
2059 sparc-sol2-nat.c and sparc-sol2-tdep.c.
2061 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
2063 2009-04-24 Pierre Muller <muller@ics.u-strasbg.fr>
2065 ARI change: Use "/* ARI: rule */" pattern.
2066 * utils.c: Update ARI patterns.
2067 * gdb_dirent.h: Likewise.
2069 2009-04-23 Anthony Green <green@moxielogic.com>
2071 * MAINTAINERS: Add moxie target.
2072 * configure.tgt: Add moxie-*-elf target.
2073 * moxie-tdep.c: New file.
2074 * moxie-tdep.h: New file.
2076 2009-04-23 Joel Brobecker <brobecker@adacore.com>
2078 * ada-lang.c: Remove an extra empty line. No code change.
2080 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
2082 Fix double free on error inserting the breakpoint instruction.
2083 * breakpoint.c (create_breakpoints): Move the
2084 update_global_location_list call to ...
2085 (break_command_really): ... here together with the second local call
2086 both unified after all the cleanups.
2088 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
2089 Tom Tromey <tromey@redhat.com>
2091 * configure, config.in: Regenerate.
2092 * configure.ac: Support for relocatable GDB datadir. Use
2093 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
2094 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
2095 * top.c (init_main): Add "set data-directory".
2096 * defs.h (gdb_datadir): Declare.
2097 * main.c (gdb_datadir): New global.
2098 (captured_main): Initialize gdb_datadir. Use relocate_directory.
2099 (relocate_path): New function.
2100 (relocate_directory): Likewise.
2101 (get_init_files): Use relocate_path.
2102 (README): Mention --with-gdb-datadir.
2104 2009-04-23 Joel Brobecker <brobecker@adacore.com>
2106 * ada-tasks (task_command_1): Call target_find_new_threads.
2108 2009-04-23 Joel Brobecker <brobecker@adacore.com>
2110 * stack.c (do_gdb_disassembly): Print the exception message if an
2111 error was thrown while trying to perform the disassembly.
2113 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2115 * varobj.c (free_variable): Replace free_current_contents by xfree.
2117 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
2119 * arm-linux-nat.c (fetch_register, store_register): Use
2120 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
2121 * arm-linux-tdep.c (arm_linux_supply_gregset,
2122 arm_linux_collect_gregset): Likewise.
2123 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
2124 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
2126 2009-04-22 Hui Zhu <teawater@gmail.com>
2128 * stack.c (_initialize_stack): Set the default of
2129 disassemble-next-line to off.
2131 2009-04-21 Tom Tromey <tromey@redhat.com>
2133 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
2134 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
2136 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
2138 * configure.ac: Add quotes to not lose brackets in help text.
2139 * configure: Rebuild.
2141 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
2143 * configure.ac: Don't postprocess Makefile in config.status.
2144 Substitute GDB_NM_FILE. Don't substitute nm_h.
2145 * Makefile.in (GDB_NM_FILE): Substitute.
2146 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
2147 * configure: Regenerate.
2148 * gnulib/Makefile.in: Regenerate.
2150 2009-04-21 Joseph Myers <joseph@codesourcery.com>
2152 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
2153 --with-htmldir): New.
2154 * configure: Regenerate.
2156 2009-04-21 Tom Tromey <tromey@redhat.com>
2158 * configure: Rebuild.
2159 * configure.ac: Use lower case for start of help strings. Clean
2160 up --with-sysroot help.
2162 2009-04-21 Tom Tromey <tromey@redhat.com>
2164 * configure: Rebuild.
2165 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
2166 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
2169 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
2171 ARI fix: remove "%p".
2172 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
2173 (ia64_sigtramp_frame_this_id): Ditto.
2174 (ia64_libunwind_frame_this_id): Ditto.
2175 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
2176 * symmisc.c (maintenance_info_psymtabs): Ditto.
2178 2009-04-21 Joseph Myers <joseph@codesourcery.com>
2180 * configure.ac (--with-relocated-sources): New.
2181 * configure, config.in: Regenerate.
2182 * source.c (add_substitute_path_rule): Remove static.
2183 * source.h (add_substitute_path_rule): Declare.
2184 * main.c: Include "source.h".
2185 (captured_main): Add substitution rule if RELOC_SRCDIR.
2187 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
2189 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
2191 2009-04-20 David Daney <ddaney@caviumnetworks.com>
2193 * NEWS: Mention MIPS/Linux hardware watchpoint support.
2195 2009-04-20 David Daney <ddaney@caviumnetworks.com>
2197 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
2198 (maint_show_dr, super_close): New variables.
2199 (super_fetch_registers, super_store_registers): Make static.
2200 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
2201 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
2202 (pt_watch_style): Define new enum.
2203 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
2205 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
2207 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
2208 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
2209 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
2210 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
2211 (type_to_irw, fill_mask, try_one_watch)
2212 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
2213 (mips_linux_new_thread, populate_regs_from_watches)
2214 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
2215 (mips_linux_close): New functions.
2216 (_initialize_mips_linux_nat): Register watchpoint functions with
2217 the target_ops. Add show-debug-regs maintenance command.
2219 2009-04-20 David Daney <ddaney@caviumnetworks.com>
2221 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
2223 2009-04-19 Pedro Alves <pedro@codesourcery.com>
2225 * NEWS: Mention gdbserver support for x86 Windows CE.
2227 2009-04-19 Eli Zaretskii <eliz@gnu.org>
2229 * config/djgpp/fnchange.lst: Fix typos.
2231 Set default host and target charsets in the DJGPP port.
2233 * config/djgpp/config.sed (am_cv_langinfo_codeset)
2234 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
2235 in all configure scripts that define ac_cv_env_CPP_value.
2237 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
2240 * config/djgpp/nl_types.h: New file.
2242 * config/djgpp/langinfo.h: New file.
2244 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
2246 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
2248 * Makefile.in (MAKEHTML): Set to makeinfo --html.
2249 (MAKEHTMLFLAGS): Set to empty.
2251 2009-04-18 Eli Zaretskii <eliz@gnu.org>
2253 * NEWS: Mention all new set/show commands added since GDB 6.8 was
2256 * go32-nat.c (go32_sysinfo): Check if the call to
2257 __dpmi_get_capabilities fills the buffer with information, and
2258 don't use the buffer if not.
2260 2009-04-17 Tom Tromey <tromey@redhat.com>
2262 * charset.c (_initialize_charset): Add special case for "646".
2264 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
2266 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
2267 * configure: Regenerate.
2268 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
2269 configure substitutions.
2270 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
2272 2009-04-17 Pierre Muller <muller@ics.u-strasbg.fr>
2274 ARI fix: Do not use %p, replace by call to host_address_to_string
2276 * darwin-nat.c (darwin_xfer_partial): Apply change.
2277 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
2278 * gnu-nat.h (proc_debug): Ditto.
2279 * symmisc.c (maintenance_info_symtabs): Ditto.
2280 (maintenance_info_psymtabs): Ditto.
2281 * windows-nat.c (handle_load_dll): Ditto.
2282 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
2283 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
2285 2009-04-17 Joseph Myers <joseph@codesourcery.com>
2287 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
2288 --enable-64-bit-bfd.
2289 (sparc-*-linux*): Likewise.
2291 2009-04-17 Eli Zaretskii <eliz@gnu.org>
2293 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
2296 2009-04-16 Pedro Alves <pedro@codesourcery.com>
2298 * remote.c (remote_query_attached): Fix pasto in packet_ok result
2301 2009-04-16 Joel Brobecker <brobecker@adacore.com>
2303 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
2304 Revert the previous change. Might not be correct, actually.
2306 2009-04-16 Joel Brobecker <brobecker@adacore.com>
2308 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
2309 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
2310 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
2311 Remove declaration. These are non-existent functions.
2313 2009-04-16 Joel Brobecker <brobecker@adacore.com>
2315 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
2316 Fix a compilation warning on mips-irix due to casting from
2317 a pointer of different size.
2319 2009-04-16 Joel Brobecker <brobecker@adacore.com>
2321 * ada-lang.c (symtab_for_sym): Delete.
2322 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
2324 2009-04-16 Joel Brobecker <brobecker@adacore.com>
2326 * ada-lang.c (extract_string): Delete.
2327 (ada_main_name): Reimplement using target_read_string instead of
2330 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
2332 * m68klinux-nat.c: Remove obsolete comment.
2333 (fetch_register, store_register): Don't call
2334 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
2335 which are always nops here.
2337 2009-04-14 Tom Tromey <tromey@redhat.com>
2339 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
2340 (c_printstr): Likewise.
2341 * charset.c: Include gdb_wait.h.
2342 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
2343 (find_charset_names): Use pexecute. Handle libiconv's output.
2345 (_initialize_charset): Use xstrdup.
2346 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
2348 (INTERMEDIATE_ENCODING): New define.
2349 * configure, config.in: Rebuild.
2350 * configure.ac: Check for btowc.
2352 2009-04-15 Tom Tromey <tromey@redhat.com>
2354 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
2356 2009-04-15 Eli Zaretskii <eliz@gnu.org>
2358 * utils.c (parse_escape): Initialize target_char to pacify GCC.
2360 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2362 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
2364 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
2366 ARI fix: sprintf rule.
2367 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
2368 * ada-lang.c (add_angle_brackets): Use xstrprintf.
2369 (ada_decode): Replace sprintf by xsnprintf.
2370 (find_old_style_renaming_symbol): Ditto.
2371 (ada_to_fixed_type_1, ada_enum_name): Ditto.
2374 2009-04-14 Joel Brobecker <brobecker@adacore.com>
2376 * target.c (target_mourn_inferior): Call bfd_cache_close_all
2377 after having executed the target mourn_inferior routine.
2379 2009-04-14 Eli Zaretskii <eliz@gnu.org>
2381 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
2384 2009-04-13 David Daney <ddaney@caviumnetworks.com>
2386 * infrun.c (maybe_software_singlestep): New function.
2387 (resume): Call maybe_software_singlestep.
2388 (handle_inferior_event): Same.
2390 2009-04-13 Tom Tromey <tromey@redhat.com>
2392 * python/python-frame.c (frapy_richcompare): Return
2393 Py_NotImplemented, not an error. Handle Py_NE as well.
2395 2009-04-13 Eli Zaretskii <eliz@gnu.org>
2397 * charset.c (EILSEQ): Define if not defined by system headers.
2399 2009-04-11 Eli Zaretskii <eliz@gnu.org>
2401 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
2402 to be consistent with renaming config.intl.in into config_intl.in.
2404 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
2405 consistent with the change from 2008-11-09.
2407 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
2409 * gdbtypes.c: Remove excessive parentheses at the return keywords.
2410 * varobj.c (varobj_invalidate): Fix indentation.
2411 * varobj.c (varobj_invalidate): Fix formatting text width.
2413 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
2415 Implement -exec-jump.
2417 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
2418 * mi/mi-main.c (mi_cmd_exec_jump): New.
2419 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
2421 2009-04-07 Doug Evans <dje@google.com>
2423 * symfile.c (symbol_file_clear): Fix indentation.
2425 2009-04-06 Mark Kettenis <kettenis@gnu.org>
2427 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
2429 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
2431 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
2432 (ppc_linux_auxv_parse): New function.
2433 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
2434 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
2436 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
2438 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
2439 BFD to contents of SPU name note.
2440 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
2441 with "from_tty" argument 1 instead of 0.
2443 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
2446 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
2447 Create the symbol in local scope.
2448 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
2450 2009-04-02 Keith Seitz <keiths@redhat.com>
2452 * stabsread.c (read_member_functions): GCC may emit an extra space
2453 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
2454 whitespace when looking for these functions.
2456 2009-04-01 Joel Brobecker <brobecker@adacore.com>
2458 Change the default value for "set print frame-arguments" to scalars.
2460 * stack.c (print_frame_arguments): Set initial value to "scalars".
2462 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
2464 * mips-tdep.c (mips_numeric_register_alieses): New definition.
2465 (mips_gdbarch_init): Add user registers from
2466 mips_numeric_register_aliases.
2468 2009-04-01 Joel Brobecker <brobecker@adacore.com>
2470 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
2472 2009-04-01 Joel Brobecker <brobecker@adacore.com>
2474 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
2475 this is the last one.
2477 2009-04-01 Pedro Alves <pedro@codesourcery.com>
2479 * remote.c (append_resumption): New.
2480 (remote_vcont_resume): Use it.
2482 2009-04-01 Joel Brobecker <brobecker@adacore.com>
2484 * windows-nat.c (+windows_get_ada_task_ptid): New function.
2485 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
2487 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
2488 Keith Seitz <keiths@redhat.com>
2489 Jan Kratochvil <jan.kratochvil@redhat.com>
2492 * Makefile.in (dbxread.o): Update.
2493 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
2494 * dwarf2read.c (GDB_FORM_cached_string): New.
2495 (read_partial_die): Use dwarf2_canonicalize_name.
2496 (dwarf2_linkage_name): Use dwarf2_name.
2497 (dwarf2_canonicalize_name): New.
2498 (dwarf2_name): Use dwarf2_canonicalize_name.
2499 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
2500 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
2501 * symtab.c (lookup_symbol_in_language): Canonicalize input before
2503 * cp-name-parser.y: operator() requires two parameters,
2504 according to libiberty.
2505 * minsyms.c (lookup_minimal_symbol): Canonicalize input
2509 2009-03-31 Joel Brobecker <brobecker@adacore.com>
2511 Provide support for (Ada) task-specific breakpoints.
2513 * ada-lang.h (ada_get_task_number): Add declaration.
2514 (breakpoint_ada_task_match): Delete declaration.
2515 * ada-tasks.c (ada_get_task_number): Make non-static.
2516 * breakpoint.h (struct breakpoint): Add field "task".
2517 * breakpoint.c (print_one_breakpoint_location): Add handling of
2518 task-specific breakpoints.
2519 (create_breakpoint, create_breakpoints, find_condition_and_thread):
2520 New parameter "task".
2521 (break_command_really): Update calls to find_condition_and_thread
2522 and create_breakpoints.
2523 (breakpoint_re_set_one): Update call to find_condition_and_thread.
2526 2009-03-31 Joel Brobecker <brobecker@adacore.com>
2528 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
2530 2009-03-31 Pedro Alves <pedro@codesourcery.com>
2532 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
2533 if the thread's ptid without a thread id field is in the list
2534 before calling thread_change_ptid.
2535 (extended_remote_attach_1): In non-stop mode, do not rely on
2536 querying the current thread, instead, query the thread list, and
2537 select the first thread of the process.
2538 * gdbthread.h (first_thread_of_process): Declare.
2539 * thread.c (first_thread_of_process): Define.
2541 2009-03-30 Stan Shebs <stan@codesourcery.com>
2543 Make tracepoints into a type of breakpoint.
2544 * breakpoint.h (enum bptype): Add bp_tracepoint.
2545 (struct breakpoint): Add fields step_count, pass_count, actions.
2546 (get_tracepoint, get_tracepoint_by_number): Declare.
2547 (all_tracepoints): Declare.
2548 * breakpoint.c: Include tracepoint.h, readline.h.
2549 (ALL_TRACEPOINTS): Move here from tracepoint.c.
2550 (tracepoint_count): Ditto.
2551 (should_be_inserted): GDB does not insert tracepoints itself.
2552 (print_it_typical): Add tracepoint case.
2553 (bpstat_what): Ditto.
2554 (print_one_breakpoint_location): Ditto, and add printing for
2555 pass count, step count, and action list.
2556 (user_settable_breakpoint): Add tracepoint case.
2557 (allocate_bp_location): Ditto.
2558 (set_breakpoint_location_function): Ditto.
2559 (disable_breakpoints_in_shlibs): Ditto.
2561 (break_command_really): Add argument traceflag, use to choose
2562 basic breakpoint type.
2563 (break_command_1): Pass extra argument.
2564 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
2565 (breakpoint_re_set_one): Add tracepoint case.
2566 (disable_command, enable_command): Ditto.
2567 (set_tracepoint_count): Move here from tracepoint.c.
2568 (trace_command): Move here from tracepoint.c and use
2569 break_command_really.
2570 (tracepoints_info): Move here from tracepoint.c and call
2572 (enable_trace_command): Move here from tracepoint.c and call
2574 (disable_trace_command): Move here from tracepoint.c and call
2576 (delete_trace_command): Move here from tracepoint.c and call
2578 (trace_pass_command): Move here from tracepoint.c.
2579 (get_tracepoint_by_number): Ditto.
2580 (tracepoint_save_command): Ditto.
2581 (get_tracepoint): New function.
2582 (all_tracepoints): New function.
2583 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
2584 deprecate "enable trace" and "disable trace" commands.
2585 * tracepoint.h (struct tracepoint): Remove.
2586 (tracepoint_chain): Remove decl.
2587 (deprecated_create_tracepoint_hook): Remove decl.
2588 (deprecated_delete_tracepoint_hook): Remove decl.
2589 (deprecated_modify_tracepoint_hook): Remove decl.
2590 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
2591 (free_actions): Update signature.
2592 (validate_actionline): Update signature.
2593 (end_actions_pseudocommand): Declare.
2594 (while_stepping_pseudocommand): Declare.
2595 * tracepoint.c: Include breakpoint.h.
2596 (tracepoint_chain, tracepoint_count): Remove.
2597 (free_actions, make_cleanup_free_actions): Update signature.
2598 (trace_command, set_raw_tracepoint): Remove.
2599 (trace_mention): Remove.
2600 (tracepoints_info): Remove.
2601 (tracepoint_operation, map_args_over_tracepoints): Remove.
2602 (get_tracepoint_by_number): Remove.
2603 (enable_trace_command, disable_trace_command): Remove.
2604 (delete_trace_command, trace_pass_command): Remove.
2605 (trace_actions_command, read_actions): Update signature.
2606 (validate_actionline): Update signature, use bp loc.
2607 (encode_actions): Ditto.
2608 (download_tracepoint): New function, body of trace_start_command.
2609 (trace_start_command): Call it, use all_tracepoints.
2610 (tracepoint_save_command): Remove.
2611 (tracepoint_dump_command): Use get_tracepoint.
2612 (end_actions_pseudocommand): Make globally visible.
2613 (while_stepping_pseudocommand): Ditto.
2614 (_initialize_tracepoint): Move command definitions to breakpoint.c.
2616 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
2618 Expose frames to Python.
2619 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
2620 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
2621 (python-frame.o): New target.
2622 * python/python-frame.c: New file.
2623 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
2624 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
2625 gdbpy_initialize_frames): New prototypes.
2626 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
2627 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
2629 * stack.c (find_frame_funname): New function, factored out of
2631 (print_frame): Call find_frame_funname.
2632 * stack.h (find_frame_funname): Add prototype.
2634 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
2636 Remove unused value_object attribute `owned_by_gdb'.
2637 * python/python-value.c (value_object): Remove owned_by_gdb
2639 (valpy_dealloc): Remove reference to self->owned_by_gdb.
2640 (valpy_new): Likewise.
2641 (value_to_value_object): Likewise.
2643 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
2645 Change gdb.Value.address from a method to an attribute.
2646 * python/python-value.c (value_object): Add `address' element.
2647 (valpy_dealloc): Decrement reference to self->address if set.
2648 (valpy_new): Initialize val_obj->address.
2649 (valpy_address): Rename to ...
2650 (valpy_get_address): ... this. Change signature from method to
2651 attribute. Update self->address if not set.
2652 (value_to_value_object): Initialize val_obj->address.
2653 (value_object_getset): Add `address' element.
2654 (value_object_methods): Remove `address' element.
2656 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
2658 * observer.sh: Set LANG/LC_ALL to C, not c.
2660 2009-03-28 Kevin Buettner <kevinb@redhat.com>
2662 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
2665 2009-03-28 Pedro Alves <pedro@codesourcery.com>
2667 * remote.c (remote_stop_ns): If multi-process extensions are off,
2668 and GDB is requesting the whole process to stop, sent "vCont;t",
2671 2009-03-28 Pedro Alves <pedro@codesourcery.com>
2673 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
2676 2009-03-27 Eli Zaretskii <eliz@gnu.org>
2678 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
2680 2009-03-26 Doug Evans <dje@google.com>
2682 * thread.c (do_restore_current_thread_cleanup): Redo test for
2683 whether to restore old->inferior_ptid.
2685 2009-03-26 Tom Tromey <tromey@redhat.com>
2687 * breakpoint.c (resolve_sal_pc): Preserve original line number
2688 when skipping prologue.
2690 2009-03-26 Doug Evans <dje@google.com>
2692 * thread.c (inferior_thread) Remove "extern" in definition.
2694 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
2696 Add gdb.Value.is_optimized_out attribute.
2697 * python/python-value.c (valpy_get_is_optimized_out): New
2699 (value_object_getset): New variable.
2700 (value_object_type): Initialize tp_getset element.
2702 2009-03-26 Joel Brobecker <brobecker@adacore.com>
2704 Recognize missing DW_AT_location as <value optimized out>.
2706 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
2707 Call add_symbol_to_list.
2709 2009-03-25 Tom Tromey <tromey@redhat.com>
2711 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
2712 * stack.c (print_this_frame_argument_p): Use check_typedef.
2714 2009-03-25 Tom Tromey <tromey@redhat.com>
2716 * configure: Rebuild.
2717 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
2718 Rearrange flags setting. Add comments.
2720 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
2722 * config/i386/nm-i386.h: Remove code within
2723 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
2724 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
2726 * config/i386/nm-cygwin64.h: Ditto.
2727 * config/i386/nm-fbsd.h: Ditto.
2728 * config/i386/nm-go32.h: Ditto.
2729 * config/i386/nm-linux.h: Ditto.
2730 * config/i386/nm-linux64.h: Ditto.
2732 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
2734 ARI fix: "xasprintf" rule.
2735 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
2737 2009-03-25 Pedro Alves <pedro@codesourcery.com>
2739 * remote.c (remote_start_remote): In non-stop mode, call
2740 init_wait_for_inferior before adding threads and inferiors.
2742 2009-03-25 Joel Brobecker <brobecker@adacore.com>
2744 * breakpoint.c (breakpoint_thread_match): Split a large condition
2745 into several smaller conditions. No behavior change.
2747 2009-03-25 Pedro Alves <pedro@codesourcery.com>
2749 * infrun.c (infrun_thread_thread_exit): New.
2750 (_initialize_infrun): Attach it to the thread_exit observer.
2751 * thread.c (delete_thread_1): Always call the observer, passing it
2753 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
2754 SILENT, return immediately.
2756 2009-03-25 Pedro Alves <pedro@codesourcery.com>
2758 * infrun.c (normal_stop): Use has_stack_frames instead of
2760 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
2761 when there is no thread selected.
2762 (mi_cmd_execute): Don't special case commands that can run without
2763 a valid selected thread.
2764 * top.c (execute_command): Don't special case commands that can
2765 run without a valid selected thread. Use has_stack_frames.
2766 * infcmd.c (ensure_valid_thread): New.
2767 (continue_1, step_1, jump_command, signal_command): Use it.
2768 (detach_command): Error out if there's no selected thread/inferior.
2769 * thread.c (print_thread_info): Allow having no thread selected.
2770 (switch_to_thread): Don't read the PC if there is no current thread.
2771 (do_restore_current_thread_cleanup): Don't record the current
2772 frame if there is no current thread.
2773 (make_cleanup_restore_current_thread): Don't read frame info if
2774 there is no selected thread.
2775 (_initialize_thread): Don't mark commands as
2776 "no_selected_thread_ok".
2777 * frame.c (get_current_frame): Error out if there is no valid
2779 (has_stack_frames): Return false if there is no valid
2781 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
2782 "no_selected_thread_ok".
2783 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
2784 (get_cmd_no_selected_thread_ok): Delete.
2785 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
2786 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
2788 * stack.c (get_selected_block): Use has_stack_frames.
2790 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
2792 Fix size of FPSCR in Power 7 processors.
2793 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
2794 (PPC_FEATURE_HAS_DFP): New #define.
2795 (ppc_linux_read_description): Check for DFP feature instead of
2796 ISA 2.05 to decide on size of the FPSCR.
2798 2009-03-25 Kevin Buettner <kevinb@redhat.com>
2800 * mn10300-tdep.c (trad-frame.h): Don't include.
2801 (prologue-value.h): Include.
2802 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
2803 (struct mn10300_prologue): Define.
2804 (push_reg, translate_rreg, check_for_saved): New functions.
2805 (mn10300_analyze_prologue): Rewrite, using prologue-value
2806 machinery. Handle more instructions than before. Permit
2807 instructions to occur in any order.
2808 (mn10300_skip_prologue): Find the extents of the function
2809 in question; mn10300_analyze_prologue no longer does this.
2810 (mn10300_analyze_frame_prologue): New function.
2811 (mn10300_frame_base): New function.
2812 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
2814 (mn10300_frame_prev_register): Likewise.
2815 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
2816 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
2818 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
2820 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
2822 Fix completer problem for filename completion on the first try.
2824 * gdb/completer.h (gdb_completion_word_break_characters): New function.
2825 * gdb/completer.c: Include gdb_assert.h.
2826 (complete_line_internal_reason): New enum.
2827 (complete_line_internal): Change last argument type to
2828 complete_line_internal_reason.
2829 Modify function to handle the different complete_line_internal_reason
2831 (complete_line): Adapt to change in complete_line_internal.
2832 (command_completer): Ditto.
2833 (gdb_completion_word_break_characters): Implement new function.
2834 * top.c (init_main): Set rl_completion_word_break_hook to
2835 gdb_completion_word_break_characters.
2838 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
2840 ARI fix: "strlen d_name" rule.
2841 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
2844 2009-03-24 Tom Tromey <tromey@redhat.com>
2845 Pedro Alves <pedro@codesourcery.com>
2847 * configure, config.in: Rebuild.
2848 * configure.ac: Check for libiconvlist.
2849 * charset.c: Check HAVE_LIBICONVLIST.
2850 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
2851 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
2852 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
2854 (INTERNAL_CFLAGS_BASE): Update.
2855 (INTERNAL_LDFLAGS): Update.
2858 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
2860 * configure.ac: Initialize the variable $PREFER_CURSES.
2861 * configure: Regenerated.
2863 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
2865 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
2866 * configure: Regenerated.
2868 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
2870 ARI fix: "strerror" rule.
2871 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
2872 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
2874 2009-03-23 Joel Brobecker <brobecker@adacore.com>
2876 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
2877 before looking up the fields inside our struct type.
2879 2009-03-23 Joel Brobecker <brobecker@adacore.com>
2881 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
2882 trying to resolve the type qualification.
2884 2009-03-23 Joel Brobecker <brobecker@adacore.com>
2886 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
2887 we try to apply the attribute on the real type, rather than
2888 its associated typedef.
2890 2009-03-23 Joel Brobecker <brobecker@adacore.com>
2892 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
2893 to make sure we try to get the modulus of the actual type, not the
2896 2009-03-23 Joel Brobecker <brobecker@adacore.com>
2898 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
2899 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
2900 to get the real type, not the associated typedef.
2902 2009-03-23 Joel Brobecker <brobecker@adacore.com>
2904 * ada-lang.c (ada_get_field_index): Add handling of the case
2905 when TYPE is a typedef of a struct.
2907 2009-03-23 Joel Brobecker <brobecker@adacore.com>
2909 Add gdb_usleep as a portable version of usleep based on gdb_select.
2910 * gdb_usleep.h, gdb_usleep.c: New files.
2911 * Makefile.in (SFILES): Add gdb_usleep.c.
2912 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
2913 (COMMON_OBS): Add gdb_usleep.o.
2914 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
2915 by call to gdb_usleep.
2917 2009-03-23 Joel Brobecker <brobecker@adacore.com>
2919 * buildsym.c (end_symtab): If we ignore the subfiles, then
2920 unlink the associated symtabs if they were already allocated.
2922 2009-03-23 Jerome Guitton <guitton@adacore.com>
2924 Provide a way to force building of GDB with libcurses.
2925 * configure.ac: Add --with-curses.
2926 * configure: Regenerated.
2928 2009-03-23 Tom Tromey <tromey@redhat.com>
2930 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
2933 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
2935 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
2936 solib_contains_address_p instead of searching.
2938 2009-03-23 Tom Tromey <tromey@redhat.com>
2940 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
2941 (iconv): Make 'inbuf' argument const.
2942 (convert_between_encodings): Use ICONV_CONST.
2943 (wchar_iterate): Likewise.
2945 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
2947 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
2948 dynamically loaded function.
2949 (LookupPrivilegeValueA): Ditto.
2950 (OpenProcessToken): Ditto.
2951 (AdjustTokenPrivileges): Rename and define placeholder for address of
2952 dynamically loaded function.
2953 (LookupPrivilegeValueA): Ditto.
2954 (OpenProcessToken): Ditto.
2955 (set_process_privilege): Remove check for loaded functions.
2956 (bad_OpenProcessToken): Define.
2957 (_initialize_loadable): Load token functions from advapi here, setting
2958 OpenProcessToken function to a dummy static function which always return
2959 error if OS doesn't support this functionality.
2961 2009-03-22 Nicolas Roche <roche@adacore.com>
2962 Christopher Faylor <me+cygwin@cgf.cx>
2964 * win32-nat.c (ctrl_c_handler): New function.
2965 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
2966 is run in a separate console.
2968 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
2970 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
2971 for dynamically loaded function.
2972 (DebugBreakProcess): Ditto.
2973 (DebugSetProcessKillOnExit): Ditto.
2974 (EnumProcessModules): Ditto.
2975 (GetModuleFileNameExA): Ditto.
2976 (GetModuleInformation): Ditto.
2977 (DebugActiveProcessStop): Rename and define placeholder for address of
2978 dynamically loaded function.
2979 (DebugBreakProcess): Ditto.
2980 (DebugSetProcessKillOnExit): Ditto.
2981 (EnumProcessModules): Ditto.
2982 (GetModuleFileNameExA): Ditto.
2983 (GetModuleInformation): Ditto.
2984 (psapi_loaded): Delete.
2985 (get_module_name): Don't check psapi_loaded, just rely on the fact that
2986 dynamically loaded functions will return failure if they weren't
2988 (has_detach_ability): Delete.
2989 (windows_attach): Remove call to has_detach_ability (). Just rely on
2990 functions being callable.
2991 (bad_DebugActiveProcessStop): Define.
2992 (bad_DebugBreakProcess): Ditto.
2993 (bad_DebugSetProcessKillOnExit): Ditto.
2994 (bad_EnumProcessModules): Ditto.
2995 (bad_GetModuleFileNameExA): Ditto.
2996 (bad_GetModuleInformation): Ditto.
2997 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
2998 dynamic storage here, setting nonexistent functions to dummy static
2999 functions which always return error.
3001 2009-03-22 Pedro Alves <pedro@codesourcery.com>
3003 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
3004 to the about_to_proceed observer notification.
3005 (mi_about_to_proceed): New.
3006 (mi_on_resume): Only output ^running and the prompt here if the
3007 target was proceeded.
3008 * breakpoint.c (breakpoint_proceeded): New static.
3009 (breakpoint_about_to_proceed): New.
3010 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
3011 the about_to_proceed observer notification.
3012 * inferior.h (breakpoint_proceeded): Delete declaration.
3013 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
3014 Notify the about_to_proceed observers.
3015 (struct inferior_status): Delete breakpoint_proceeded member.
3016 (save_inferior_status): Don't save it.
3017 (restore_inferior_status): Don't restore it.
3018 * mi-main.h (mi_proceeded): Declare.
3019 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
3022 2009-03-22 Pedro Alves <pedro@codesourcery.com>
3024 * gdbthread.h (struct thread_info): Add in_infcall member.
3025 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
3026 Remove reverences to suppress_resume_observer. Refresh
3027 `call_thread' after returning from `proceed'.
3028 * infcmd.c (suppress_resume_observer): Delete.
3029 * inferior.h (suppress_resume_observer): Delete declaration.
3030 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
3032 * thread.c (set_running): Remove references to
3033 suppress_resume_observer.
3034 * infrun.c (struct inferior_status): Add in_infcall member.
3035 (save_inferior_status): Save it.
3036 (restore_inferior_status): Restore it.
3038 2009-03-22 Pedro Alves <pedro@codesourcery.com>
3040 * infcall.c (run_inferior_call): Remove references to
3041 suppress_stop_observer.
3042 * infcmd.c (suppress_stop_observer): Delete.
3043 (finish_command_continuation): Remove NOTE. Don't clear
3044 suppress_stop_observer anymore.
3045 (finish_command_continuation_free_arg): Likewise.
3046 (finish_forward): Remove references to suppress_stop_observer.
3047 Call normal_stop observer if we haven't already.
3048 * inferior.h (suppress_stop_observer): Delete.
3049 * infrun.c (normal_stop): When deciding to suppress the
3050 normal_stop observer, check for proceed_to_finish instead of
3051 suppress_stop_observer.
3053 2009-03-22 Pedro Alves <pedro@codesourcery.com>
3055 * symfile.c (symfile_relocate_debug_section): Remove check for
3058 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3059 Jim Blandy <jimb@red-bean.com>
3060 Thiago Jung Bauermann <bauerman@br.ibm.com>
3061 Tom Tromey <tromey@redhat.com>
3063 Miscellaneous fixes to the Python code.
3064 * python/python-cmd.c (cmdpy_init): Accept keyword
3066 * python/python-value.c (valpy_string): Accept keyword
3068 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
3069 Do not call value_to_value_object on NULL RES_VAL.
3070 (value_object_methods): Change `string' entry to also accept
3072 (convert_value_from_python): Return a copy of the value if obj is
3074 (value_object_methods): Mark the `string' method as accepting
3075 keywords, and show method "prototype" in the doc string.
3076 * python/python.c (get_parameter): Don't return inside a
3079 2009-03-20 Tom Tromey <tromey@redhat.com>
3081 Add support for convenience functions in Python.
3082 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
3083 (SUBDIR_PYTHON_SRCS): Add python-function.c.
3084 (python-function.o): New target.
3085 * eval.c: Include "python/python.h" and <ctype.h>.
3086 (evaluate_subexp_standard): Handle values of type
3087 TYPE_CODE_INTERNAL_FUNCTION.
3088 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
3089 * parse.c (write_exp_string): Remove duplicate word in comment.
3090 * python/python-function.c: New file.
3091 * python/python-internal.h (gdbpy_initialize_functions): Add
3093 * python/python.c (_initialize_python): Call
3094 gdbpy_initialize_functions.
3095 * valprint.c (value_check_printable): Handle values of type
3096 TYPE_CODE_INTERNAL_FUNCTION.
3097 * value.c: Include "cli/cli-decode.h".
3098 (internal_function): New struct.
3099 (functionlist, internal_fn_type): New static variables.
3100 (lookup_only_internalvar,
3101 lookup_internalvar): Add const qualifier to name argument.
3102 (create_internalvar): Likewise. Initialize new field.
3103 (set_internal_var): Fix typo in comment. Don't allow assignment
3104 to canonical variable.
3105 (value_create_internal_function, value_internal_function_name,
3106 call_internal_function, function_command, function_destroyer,
3107 add_internal_function): New functions.
3108 (_initialize_values): Create `function' placeholder command.
3109 Initialize internal_fn_type.
3110 * value.h (lookup_only_internalvar, create_internalvar,
3111 lookup_internalvar): Add const qualifier to name argument.
3112 (internal_function_fn, add_internal_function, call_internal_function,
3113 value_internal_function_name): Add prototypes.
3114 (struct internalvar) <canonical>: New field.
3116 2009-03-20 Tom Tromey <tromey@redhat.com>
3118 * c-lang.c (evaluate_subexp_c): Call check_typedef.
3120 2009-03-20 Tom Tromey <tromey@redhat.com>
3121 Julian Brown <julian@codesourcery.com>
3123 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
3124 PR i18n/9401, PR exp/9613:
3126 * value.h (value_typed_string): Declare.
3127 (val_print_string): Update.
3128 * valprint.h (print_char_chars): Update.
3129 * valprint.c (print_char_chars): Add type argument. Update.
3130 (val_print_string): Likewise.
3131 * valops.c (value_typed_string): New function.
3132 * utils.c (host_char_to_target): New function.
3133 (parse_escape): Use host_char_to_target, host_hex_value. Update.
3135 (no_control_char_error): Remove.
3136 * typeprint.c (print_type_scalar): Update.
3137 * scm-valprint.c (scm_scmval_print): Update.
3138 * scm-lang.h (scm_printchar, scm_printstr): Update.
3139 * scm-lang.c (scm_printchar): Add type argument.
3140 (scm_printstr): Likewise.
3141 * printcmd.c (print_formatted): Update.
3142 (print_scalar_formatted): Update.
3143 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
3144 Handle '%lc' and '%ls'.
3145 * parser-defs.h (struct typed_stoken): New type.
3146 (struct stoken_vector): Likewise.
3147 (write_exp_string_vector): Declare.
3148 * parse.c (write_exp_string_vector): New function.
3149 * p-valprint.c (pascal_val_print): Update.
3150 * p-lang.h (is_pascal_string_type, pascal_printchar,
3151 pascal_printstr): Update.
3152 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
3153 Add 'char_type' argument.
3154 (pascal_emit_char): Add type argument.
3155 (pascal_printchar): Likewise.
3156 (pascal_printstr): Likewise.
3157 * objc-lang.c (objc_emit_char): Add type argument.
3158 (objc_printchar): Likewise.
3159 (objc_printstr): Likewise.
3160 * macroexp.c (get_character_constant): Handle unicode characters.
3162 (get_string_literal): Handle unicode strings. Use
3164 * m2-valprint.c (print_unpacked_pointer): Update.
3165 (m2_print_array_contents): Update.
3166 (m2_val_print): Update.
3167 * m2-lang.c (m2_emit_char): Add type argument.
3168 (m2_printchar): Likewise.
3169 (m2_printstr): Likewise.
3170 * language.h (struct language_defn) <la_printchar>: Add type
3172 <la_printstr, la_emitchar>: Likewise.
3173 (LA_PRINT_CHAR): Likewise.
3174 (LA_PRINT_STRING): Likewise.
3175 (LA_EMIT_CHAR): Likewise.
3176 * language.c (unk_lang_emit_char): Add type argument.
3177 (unk_lang_printchar): Likewise.
3178 (unk_lang_printstr): Likewise.
3179 * jv-valprint.c (java_val_print): Update.
3180 * jv-lang.c (java_emit_char): Add type argument.
3181 * f-valprint.c (f_val_print): Update.
3182 * f-lang.c (f_emit_char): Add type argument.
3183 (f_printchar): Likewise.
3184 (f_printstr): Likewise.
3185 * expprint.c (print_subexp_standard): Update.
3186 * charset.h (target_wide_charset): Declare.
3187 (c_target_char_has_backslash_escape, c_parse_backslash,
3188 host_char_print_literally, host_char_to_target,
3189 target_char_to_host, target_char_to_control_char): Remove.
3190 (enum transliterations): New type.
3191 (convert_between_encodings): Declare.
3192 (HOST_ESCAPE_CHAR): New define.
3193 (host_letter_to_control_character, host_hex_value): Declare.
3194 (enum wchar_iterate_result): New enum.
3195 (struct wchar_iterator): Declare.
3196 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
3197 wchar_push_back): Declare.
3198 * charset-list.h: New file.
3199 * c-valprint.c (textual_name): New function.
3200 (textual_element_type): Handle wide character types.
3201 (c_val_print): Pass original type to textual_element_type. Handle
3202 wide character types.
3203 (c_value_print): Use textual_element_type. Pass original type of
3205 * c-lang.h (enum c_string_type): New type.
3206 (c_printchar, c_printstr): Update.
3207 * c-lang.c (classify_type): New function.
3208 (print_wchar): Likewise.
3209 (c_emit_char): Add type argument. Handle wide characters.
3210 (c_printchar): Likewise.
3211 (c_printstr): Add type argument. Handle wide and multibyte
3213 (convert_ucn): New function.
3214 (emit_numeric_character): Likewise.
3215 (convert_octal): Likewise.
3216 (convert_hex): Likewise.
3217 (ADVANCE): New macro.
3218 (convert_escape): New function.
3219 (parse_one_string): Likewise.
3220 (evaluate_subexp_c): Likewise.
3221 (exp_descriptor_c): New global.
3222 (c_language_defn): Use exp_descriptor_c.
3223 (cplus_language_defn): Likewise.
3224 (asm_language_defn): Likewise.
3225 (minimal_language_defn): Likewise.
3226 (charset_for_string_type): New function.
3227 * c-exp.y (%union): Add 'svec' and 'tsval'.
3229 (exp): Add CHAR production.
3230 (string_exp): Rewrite.
3231 (exp) <string_exp>: Rewrite.
3232 (tempbuf): Now global.
3233 (tempbuf_init): New global.
3234 (parse_string_or_char): New function.
3235 (yylex) <tempbuf>: Now global.
3236 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
3238 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
3239 (c_parse_escape): New function.
3240 * auxv.c (fprint_target_auxv): Update.
3241 * ada-valprint.c (ada_emit_char): Add type argument.
3242 (ada_printchar): Likewise.
3243 (ada_print_scalar): Update.
3244 (printstr): Add type argument. Update calls to ada_emit_char.
3245 (ada_printstr): Add type argument.
3246 (ada_val_print_array): Update.
3247 (ada_val_print_1): Likewise.
3248 * ada-lang.c (emit_char): Add type argument.
3249 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
3251 * gdb_locale.h: Include langinfo.h.
3252 * charset.c (_initialize_charset): Set default host charset from
3253 the locale. Don't register charsets. Add target-wide-charset
3254 commands. Call find_charset_names.
3255 (struct charset, struct translation): Remove.
3256 (GDB_DEFAULT_HOST_CHARSET): Remove.
3257 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
3258 (target_wide_charset_name): New global.
3259 (show_host_charset_name): Handle "auto".
3260 (show_target_wide_charset_name): New function.
3261 (host_charset_enum, target_charset_enum): Remove.
3262 (charset_enum): New global.
3263 (all_charsets, register_charset, lookup_charset, all_translations,
3264 register_translation, lookup_translation): Remove.
3265 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
3266 (iso_8859_print_literally, iso_8859_to_control,
3267 iso_8859_family_charset): Remove.
3268 (ebcdic_print_literally, ebcdic_to_control,
3269 ebcdic_family_charset): Remove.
3270 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
3271 register_iconv_charsets): Remove.
3272 (target_wide_charset_be_name, target_wide_charset_le_name): New
3274 (identity_either_char_to_other): Remove.
3275 (set_be_le_names, validate): New functions.
3276 (backslashable, backslashed, represented): Remove.
3277 (default_c_target_char_has_backslash_escape): Remove.
3278 (default_c_parse_backslash, iconv_convert): Remove.
3279 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
3280 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
3281 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
3282 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
3283 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
3284 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
3285 (table_convert_char, table_translation, simple_table_translation):
3287 (current_host_charset, current_target_charset,
3288 c_target_char_has_backslash_escape_func,
3289 c_target_char_has_backslash_escape_baton): Remove.
3290 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
3291 (host_char_to_target_func, host_char_to_target_baton): Remove.
3292 (target_char_to_host_func, target_char_to_host_baton): Remove.
3293 (cached_iconv_host_to_target, cached_iconv_target_to_host):
3295 (lookup_charset_or_error, check_valid_host_charset): Remove.
3296 (set_host_and_target_charsets): Remove.
3297 (set_host_charset, set_target_charset): Remove.
3298 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
3299 (set_target_wide_charset_sfunc): New function.
3300 (show_charset): Print target wide character set.
3301 (host_charset, target_charset): Rewrite.
3302 (target_wide_charset): New function.
3303 (c_target_char_has_backslash_escape): Remove.
3304 (c_parse_backslash): Remove.
3305 (host_letter_to_control_character): New function.
3306 (host_char_print_literally): Remove.
3307 (host_hex_value): New function.
3308 (target_char_to_control_char): Remove.
3309 (cleanup_iconv): New function.
3310 (convert_between_encodings): New function.
3311 (target_char_to_host): Remove.
3312 (struct wchar_iterator): Define.
3313 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
3314 wchar_push_back): New functions.
3315 (do_cleanup_iterator): New function.
3316 (char_ptr): New typedef.
3317 (charsets): New global.
3318 (add_one, find_charset_names): New functions.
3319 (default_charset_names): New global.
3320 (auto_host_charset_name): Likewise.
3321 * aclocal.m4, config.in, configure: Rebuild.
3322 * configure.ac: Call AM_LANGINFO_CODESET.
3323 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
3324 (AM_ICONV): Invoke earlier.
3325 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
3326 LIBICONV_LIBDIR. Check for libiconv in build tree.
3327 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
3328 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
3329 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
3330 * gdb_obstack.h (obstack_grow_wstr): New define.
3331 * gdb_wchar.h: New file.
3332 * defs.h: Include it.
3334 2009-03-20 Tom Tromey <tromey@redhat.com>
3335 Jan Kratochvil <jan.kratochvil@redhat.com>
3337 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
3338 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
3340 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
3342 * ada-typeprint.c (print_array_type): Do the NULL check
3345 2009-03-19 Tom Tromey <tromey@redhat.com>
3347 * utils.c (do_obstack_free): New function.
3348 (make_cleanup_obstack_free): Likewise.
3349 * defs.h (make_cleanup_obstack_free): Declare.
3351 2009-03-18 Doug Evans <dje@google.com>
3353 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
3354 int, not a long long.
3355 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
3357 * expprint.c (dump_raw_expression): Print note if non-NULL.
3359 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
3362 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
3364 * Makefile.in: Update license to GPLv3.
3365 * ada-exp.y: Update license to GPLv3.
3366 * ada-lex.l: Update license to GPLv3.
3367 * c-exp.y: Update license to GPLv3.
3368 * cp-name-parser.y: Update license to GPLv3.
3369 * darwin-nat-info.c: Update license to GPLv3.
3370 * f-exp.y: Update license to GPLv3.
3371 * gdb_thread_db.h: Update license to GPLv3.
3372 * hppanbsd-nat.c: Update license to GPLv3.
3373 * hppanbsd-tdep.c: Update license to GPLv3.
3374 * hppaobsd-tdep.c: Update license to GPLv3.
3375 * jv-exp.y: Update license to GPLv3.
3376 * m2-exp.y: Update license to GPLv3.
3377 * objc-exp.y: Update license to GPLv3.
3378 * p-exp.y: Update license to GPLv3.
3379 * reply_mig_hack.awk: Update license to GPLv3.
3380 * reverse.c: Update license to GPLv3.
3381 * xtensa-xtregs.c: Update license to GPLv3.
3383 2009-03-18 Pedro Alves <pedro@codesourcery.com>
3385 * remote.c (remote_close): Don't call generic_mourn_inferior.
3386 (remote_mourn_1): Call generic_mourn_inferior after closing the
3389 2009-03-18 Pedro Alves <pedro@codesourcery.com>
3391 * remote.c (remote_start_remote): Add missing call to
3392 init_wait_for_inferior in non-stop mode.
3394 2009-03-18 Pedro Alves <pedro@codesourcery.com>
3396 * breakpoint.c (bpstat_should_step): Only consider software
3397 watchpoints that have a location.
3399 2009-03-17 Joel Brobecker <brobecker@adacore.com>
3401 Add a target_ops parameter to the to_kill method in struct target_ops.
3403 * target.h (struct target_ops): Add a "target_ops *" parameter to
3405 (target_kill): Remove macro. Add declaration.
3406 * target.c (debug_to_kill): Delete, no longer necessary.
3407 (target_kill): New function.
3408 (update_current_target): Stop inheriting the to_kill method.
3409 Do not de_fault it to no_process either.
3410 (setup_target_debug): Do not set current_target.to_kill.
3411 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
3412 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
3413 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
3416 2009-03-17 Doug Evans <dje@google.com>
3418 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
3419 glibc 2.3.2 and earlier.
3421 2009-03-17 Joel Brobecker <brobecker@adacore.com>
3423 * frame.c (get_prev_frame_1): Do not perform the inner_frame
3424 sanity check if this_frame is not NORMAL.
3425 (frame_id_inner): Update the description of this function.
3427 2009-03-17 Hui Zhu <teawater@gmail.com>
3429 * stack.c: Change the introduce of "disassemble-next-line".
3431 2009-03-17 Pedro Alves <pedro@codesourcery.com>
3433 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
3436 2009-03-17 Hui Zhu <teawater@gmail.com>
3438 * stack.c: Include valprint.h.
3439 (disassemble_next_line): New enum.
3440 (show_disassemble_next_line): New function. Show the current
3441 value of disassemble-next-line.
3442 (gdb_disassembly_stub_args): New struct for argument passing
3443 between function do_gdb_disassembly and function
3444 gdb_disassembly_stub.
3445 (gdb_disassembly_stub): New function. Helper for
3447 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
3448 the exception from the gdb_disassembly because it will be
3449 broken by filter sometime.
3450 (print_frame_info): If disassemble-next-line is set to auto
3451 or on and doesn't have the line debug messages for $pc,
3452 output the next instruction.
3453 If disassemble-next-line is set to on and there is line debug
3454 messages, output assembly codes for next line.
3455 (_initialize_stack): Make the "set disassemble-next-line"
3456 command an auto-boolean command. Change its class to
3457 class_stack. Place it in the top level set list. Extend help
3458 to describe the auto mode.
3460 2009-03-17 Pedro Alves <pedro@codesourcery.com>
3462 * infrun.c (normal_stop): Don't overwrite old_chain.
3464 2009-03-16 Joel Brobecker <brobecker@adacore.com>
3466 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
3467 which is undefined, by call to regcache_invalidate, which should
3468 do what the original author wanted to do.
3470 2009-03-16 Joel Brobecker <brobecker@adacore.com>
3472 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
3473 (mips_create_inferior): Likewise.
3475 2009-03-16 Joel Brobecker <brobecker@adacore.com>
3477 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
3479 2009-03-16 Joel Brobecker <brobecker@adacore.com>
3481 * darwin-nat.c (darwin_resume): Fix a compiler warning when
3482 building on x86_64-darwin.
3484 2009-03-16 Tristan Gingold <gingold@adacore.com>
3486 * configure.tgt: Add handling for x86_64-darwin.
3488 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
3490 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
3492 2009-03-15 Joel Brobecker <brobecker@adacore.com>
3494 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
3495 Use the ops parameter to get to the target beneath, rather than
3496 using the current_target global. Using the current_target global
3497 was an unintended accident.
3499 2009-03-15 Joel Brobecker <brobecker@adacore.com>
3501 Fix an error happening while loading symbols from a core file
3504 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
3505 to detect whether we're debugging a core file or not.
3507 2009-03-15 Joel Brobecker <brobecker@adacore.com>
3509 Modernize the aix-thread later by getting rid of the base_target
3510 global. This brings back to life the AIX port which was otherwise
3511 crashing all the time.
3513 * aix-thread.c (base_target): Delete.
3514 (pd_enable): Do not set base_target.
3515 (aix_thread_attach): Use find_target_beneath instead of base_target.
3516 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
3517 (aix_thread_fetch_registers, aix_thread_store_registers),
3518 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
3519 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
3520 (aix_thread_kill): Delete. Does not seem necessary.
3521 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
3523 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3525 * stack.c (return_command <retval_exp>): New variables retval_expr
3526 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
3527 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
3528 if RETURN_TYPE is NULL.
3530 2009-03-14 Pedro Alves <pedro@codesourcery.com>
3532 * remote.c (PACKET_qAttached): New.
3533 (remote_query_attached): New.
3534 (remote_add_inferior): Add new `attached' argument. Handle it.
3535 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
3536 -1 to remote_add_inferior in new parameter.
3537 (extended_remote_attach_1): Adjust to pass 1 to
3538 remote_add_inferior in the new parameter.
3539 (extended_remote_create_inferior_1): Adjust to pass 0 to
3540 remote_add_inferior in the new parameter.
3541 (_initialize_remote): Add "set/show remote query-attached-packet"
3544 2009-03-13 Tom Tromey <tromey@redhat.com>
3546 * symtab.c (lookup_symbol_in_language): Use a cleanup.
3548 2009-03-13 Doug Evans <dje@google.com>
3550 * exceptions.h: Clean up some comments on catch_exceptions usage.
3551 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
3554 2009-02-17 Joel Brobecker <brobecker@adacore.com>
3556 The following patch helps getting rid of a warning inside solib-som.c.
3558 * source.c (source_full_path_of): Constify parameter filename.
3559 * defs.h (source_full_path_of): Update declaration accordingly.
3561 2009-03-12 Joel Brobecker <brobecker@adacore.com>
3563 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
3564 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
3565 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
3567 2009-03-12 Joel Brobecker <brobecker@adacore.com>
3569 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
3570 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
3572 2009-03-12 Joel Brobecker <brobecker@adacore.com>
3574 * ada-tasks.c (ada_task_is_alive): Move up and make static.
3575 * ada-lang.h (ada_task_is_alive): Remove declaration.
3577 2009-03-12 Jerome Guitton <guitton@adacore.com>
3579 * ada-lang.c (ada_delta): Change the type of numerators and
3580 denominators to DOUBLEST, as they may not fit into a long.
3581 (scaling_factor): Ditto.
3583 2009-03-12 Jerome Guitton <guitton@adacore.com>
3585 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
3587 2009-03-12 Joel Brobecker <brobecker@adacore.com>
3589 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
3590 types, if we are unable to determine the actual symbol type
3591 from its tag, then use the static approximation instead.
3593 2009-03-12 Joel Brobecker <brobecker@adacore.com>
3595 Fix crash printing packed record with packed array.
3597 * ada-lang.c (ada_modulus_from_name): New function.
3598 (ada_modulus): In the case where the type length is bigger than
3599 the size of the type used to hold the bounds, try determining
3600 the modulus from the type name.
3601 (ada_value_primitive_packed_val): Fix bug in the computation of
3602 ntarg causing an out-of-buffer invalid access.
3604 2009-03-12 Joel Brobecker <brobecker@adacore.com>
3606 Fix segfault when printing short_integer'last.
3608 * ada-lang.c (ada_find_any_type): Search in the primitive types
3609 if a symbol could not be found.
3611 2009-03-12 Joel Brobecker <brobecker@adacore.com>
3613 * ada-tasks.c (task_states,long_task_states): Add new states
3614 Activating and Acceptor_Delay_Sleep. Update the description
3615 of state Acceptor_Sleep.
3617 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
3619 Fix a build failure on Darwin following some changes in
3620 the profile of some target_ops methods.
3622 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
3624 (darwin_stop_inferior, darwin_detach): Likewise.
3626 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
3628 Include token in ^running notification for CLI commands.
3630 * mi/mi-main.c (mi_execute_command): Set current_token here.
3631 (mi_cmd_execute): Do not set current_token here.
3633 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
3637 * mi/mi-main.c (mi_print_timing_maybe): New.
3638 (captured_mi_execute_command): Simplify. Output timings to
3640 (mi_execute_async_cli_command): Do not print timings.
3641 * mi/mi-main.h (mi_print_timing_maybe): Declare.
3642 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
3644 2009-03-12 Jerome Guitton <guitton@adacore.com>
3646 * xcoffread.c (process_linenos): Check if the line in the
3647 include table refers to the main source file and, if so,
3648 add them to the main subfile.
3650 2009-03-12 Joel Brobecker <brobecker@adacore.com>
3652 Fix a build failure on AIX introduced after a change in the profile
3653 of some of the "methods" in the target_ops structure.
3654 * aix-thread.c: Add missing target_ops parameter throughout.
3656 Implement Ada task switching on AIX.
3657 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
3658 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
3660 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
3662 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
3663 value_mark and value_free_to_mark.
3664 * objfiles.c (free_objfile): Call objfile_free_data before
3667 2009-03-10 Hui Zhu <teawater@gmail.com>
3669 * disasm.c (gdb_disassembly): Remove unused argument
3671 * disasm.h (gdb_disassembly): Ditto.
3672 * cli/cli-cmds.c (print_disassembly): Ditto.
3673 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
3675 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
3677 * solib.c (solib_contains_address_p): New function.
3678 (solib_name_from_address): Use it.
3679 * printcmd.c (display_uses_solib_p): Use it.
3680 * solib.h (solib_contains_address_p): Declare it.
3682 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
3684 * varobj.c (free_variable): Call value_free.
3686 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
3689 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
3690 Move the variable `macinfo_type' out of the loop. Create a new
3691 processing pass before the current one to pre-create `current_file'.
3692 New complaint on misplaced zero/non-zero definitions/includes.
3693 Skip first DW_MACINFO_start_file with `at_commandline' set.
3695 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
3697 * solib.c (reload_shared_libraries): Give
3698 inferior a chance to reset solib breakpoint.
3701 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
3703 * windows-nat.c (dr): Redefine to use largest possible integer which
3705 (cygwin_set_dr): Avoid coercion.
3707 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
3709 * windows-nat.c (windows_create_inferior): Implement --tty handling on
3712 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
3714 Rename solib_address to solib_name_from_address.
3715 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
3716 (disable_breakpoints_in_unloaded_shlib): Update.
3717 * printcmd.c (display_uses_solib_p): Likewise.
3718 * stack.c (print_frame): Likewise.
3722 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
3724 * printcmd.c (do_one_display): Reparse exp_string.
3725 (display_uses_solib_p): New function.
3726 (clear_dangling_display_expressions): New function.
3727 (_initialize_printcmd): Add observer.
3728 * solib.c (no_shared_libraries): Swap order of calls to
3729 clear_solib and objfile_purge_solibs.
3731 2009-03-05 Joel Brobecker <brobecker@adacore.com>
3733 Implement the target-specific part of Ada tasking support
3736 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
3737 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
3739 2009-03-05 Joel Brobecker <brobecker@adacore.com>
3741 Get rid of the global "base_target" and use "find_target_beneath"
3742 to find the underlying target.
3743 * dec-thread.c (base_target): Delete.
3744 (enable_dec_thread): Remove assignement to base_target.
3745 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
3746 (dec_thread_fetch_registers, dec_thread_store_registers)
3747 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
3748 Update the function profile if necessary.
3749 Use find_target_beneath to call the same method but from
3750 the underlying target, removing the need for "base_target".
3752 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
3753 Fix a copy/paste error in a few debug traces...
3755 * solib-osf.c (init_so): Use a simpler method for computing
3756 the size of lm_info structure. This also gets rid of warning
3757 emitted by the compiler.
3759 2009-03-05 Pedro Alves <pedro@codesourcery.com>
3761 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
3762 duplicates of permanent breakpoints.
3764 2009-03-04 Pedro Alves <pedro@codesourcery.com>
3766 * inferior.h (notice_new_inferior): Declare.
3767 * infcmd.c (notice_new_inferior): New.
3768 * remote.c (remote_add_inferior, remote_add_thread): New.
3769 (notice_new_inferiors): Rename to...
3770 (remote_notice_new_inferior): ... this. Add RUNNING argument.
3771 Use remote_add_thread instead of add_thread, passing it the
3772 RUNNING argument. Add an inferior with remote_add_inferior. If
3773 we just learned about an inferior, call notice_new_inferior.
3774 (record_currthread): Adjust.
3775 (remote_threads_info): Adjust to use remote_notice_new_inferior.
3776 (remote_start_remote, extended_remote_attach_1): Use
3777 remote_add_inferior.
3778 (process_stop_reply): Adjust. Call remote_notice_new_inferior
3779 after handling expedited registers and watchpoint state.
3780 (extended_remote_create_inferior_1): Use remote_add_inferior.
3782 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
3784 * infcmd.c (registers_info): Remove register number case.
3786 2009-03-03 Pedro Alves <pedro@codesourcery.com>
3788 * top.c (quit_target): Check for target_has_execution before
3789 killing or detaching from inferiors.
3791 2009-03-02 Joel Brobecker <brobecker@adacore.com>
3793 Remove some unused routines.
3795 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
3797 * ada-lang.c (ada_task_list_iterator_ftype)
3798 (iterate_over_live_ada_tasks): Delete.
3799 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
3802 2009-03-01 Doug Evans <dje@google.com>
3804 * symtab.c: Remove trailing whitespace throughout the file.
3805 (expand_line_sal): Fix some typos and whitespace.
3807 * Makefile.in (clean): rm -f $(DEPDIR)/*.
3809 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
3810 (init.c): signals/ -> common/.
3811 (signals.o): Update.
3812 * target.h (target_signal_to_string,target_signal_to_string)
3813 (target_signal_from_name,target_signal_to_host_p)
3814 (target_signal_from_host,target_signal_to_host): Move to ...
3815 * common/gdb_signals.h: ... here. New file.
3816 * common/signals.c: Moved here from signals/signals.c.
3817 #include gdb_signals.h, remove #include of target.h in gdb case.
3818 (target_signal_from_command,default_target_signal_to_host)
3819 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
3821 Include thread ID in target_wait debugging output.
3822 * infrun.c (print_target_wait_results): New function.
3823 (wait_for_inferior,fetch_inferior_event): Call it.
3825 2009-02-27 Pedro Alves <pedro@codesourcery.com>
3827 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
3828 with a ptid_t field.
3829 * linux-thread-db.c (thread_get_info_callback): Build the ptid
3830 using the pid stored in proc_handle.ptid.
3831 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
3832 (check_for_thread_db, thread_db_detach, check_event)
3833 (thread_db_mourn_inferior, find_new_threads_callback)
3834 (thread_db_find_new_threads_1): Adjust.
3835 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
3836 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
3838 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
3840 * valprint.c (read_string): Rework clean-up logic. Use
3841 free_current_contents to clean-up buffer.
3843 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
3845 * MAINTAINERS: Update e-mail address.
3847 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
3849 * python/python-utils.c (python_string_to_unicode): Always return
3851 (python_string_to_target_string): Decrement transient python
3853 (python_string_to_host_string): Likewise.
3855 2007-02-26 Pedro Alves <pedro@codesourcery.com>
3857 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
3858 call to super_fetch_registers.
3859 (mips64_linux_store_registers): Pass `ops' to call to
3860 super_store_registers.
3862 2009-02-25 Doug Evans <dje@google.com>
3864 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
3867 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
3868 disabled_shlib_breaks, unused.
3870 * printcmd.c (build_address_symbolic): Fix comment.
3872 2009-02-25 Hui Zhu <teawater@gmail.com>
3874 * cli/cli-script.c (define_command): Add _() to query.
3875 * gnu-nat.c (inf_validate_task_sc): Ditto.
3876 * infcmd.c (kill_if_already_running): Ditto.
3877 (jump_command): Ditto.
3878 (attach_command): Ditto.
3879 * inflow.c (kill_command): Ditto.
3880 * infrun.c (handle_command): Ditto.
3881 * maint.c (maintenance_dump_me): Ditto.
3882 * memattr.c (mem_delete_command): Ditto.
3883 * monitor.c (monitor_interrupt_query): Ditto.
3884 * nto-procfs.c (interrupt_query): Ditto.
3885 * printcmd.c (undisplay_command): Ditto.
3886 * remote-mips.c (mips_kill): Ditto.
3887 * remote.c (interrupt_query): Ditto.
3888 * solib-irix.c (irix_open_symbol_file_object): Ditto.
3889 * solib-osf.c (osf_open_symbol_file_object): Ditto.
3890 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
3891 * solib-som.c (som_open_symbol_file_object): Ditto.
3892 * solib-svr4.c (open_symbol_file_object): Ditto.
3893 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
3894 * target.c (kill_or_be_killed): Ditto.
3895 * tracepoint.c (delete_trace_command): Ditto.
3896 * top.c (quit_confirm): Add _() to s that will be used
3899 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
3901 Fix windows-nat.c compilation failure.
3903 * windows-nat.c (windows_thread_alive): Fix forward declaration.
3904 (get_windows_debug_event): Add ops parameter to call to windows_resume.
3906 2009-02-23 Pedro Alves <pedro@codesourcery.com>
3908 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
3910 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
3912 * symtab.c (find_line_symtab): Initialize exact to avoid
3915 2009-02-23 Pedro Alves <pedro@codesourcery.com>
3917 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
3918 `ops' to recursive call.
3920 2009-02-23 Pedro Alves <pedro@codesourcery.com>
3922 * corelow.c (get_core_registers): Adjust.
3923 (core_file_thread_alive): Rename to...
3924 (core_thread_alive): ... this.
3925 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
3926 (init_core_ops): Adjust.
3927 (coreops_suppress_target): Delete.
3928 (_initialize_corelow): Unconditionally add core_ops.
3929 * procfs.c: Include "inf-child.h".
3930 (procfs_ops): Delete.
3931 (init_procfs_ops): Delete. Reimplement as...
3932 (procfs_target): ... this, inheriting from inf-child.
3933 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
3934 (procfs_prepare_to_store): Delete.
3935 (procfs_store_registers, procfs_resume): Adjust.
3936 (procfs_open): Delete.
3937 (procfs_suppress_run): Delete.
3938 (procfs_can_run): Delete.
3939 (procfs_mourn_inferior): Adjust.
3940 (procfs_init_inferior): Add target_ops parameter. Adjust.
3941 (procfs_create_inferior): Don't pass procfs_init_inferior to
3942 fork_inferior. Instead call it after fork_inferior returns.
3943 (procfs_find_new_threads): Adjust.
3944 (_initialize_procfs): Adjust to use procfs_target instead of
3946 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
3947 (lwp_to_thread): Use target_thread_alive.
3948 (sol_thread_open): Delete.
3949 (sol_thread_attach): Delete.
3950 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
3951 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
3952 to use find_target_beneath.
3953 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
3954 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
3955 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
3956 (check_for_thread_db): New.
3957 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
3958 (sol_thread_new_objfile): Call check_for_thread_db.
3959 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
3960 (sol_thread_can_run): Delete.
3961 (sol_thread_alive): Adjust to use find_target_beneath.
3962 (sol_thread_stop): Delete.
3963 (rw_common): Use target_write_memory or target_read_memory.
3964 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
3965 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
3966 (solaris_pid_to_str): Remove check for libthread_db initialization
3968 (sol_find_new_threads): Remove check for libthread_db
3969 initialization failing, or for an invalid inferior_ptid. Adjust
3970 to use find_target_beneath.
3971 (sol_core_open, sol_core_close, sol_core_detach,
3972 sol_core_files_info, sol_find_memory_regions,
3973 sol_make_note_section, ignore): Delete.
3974 (init_sol_thread_ops): Make it a thread_stratum target. Remove
3975 unneeded callback settings.
3976 (init_sol_core_ops): Delete.
3977 (_initialize_sol_thread): No longer call init_sol_core_ops, set
3978 procfs_suppress_run, or hack with core_ops.
3980 * target.h (struct target_ops): Add a target_ops * parameter to
3981 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
3982 and to_find_new_threads.
3983 (target_fetch_registers, target_store_registers)
3984 (target_thread_alive, target_find_new_threads): Redeclare as
3987 * target.c (update_current_target): Do not inherit or de_fault
3988 to_resume, to_fetch_registers, to_store_registers,
3989 to_thread_alive, to_find_new_threads.
3990 (target_resume): Adjust.
3991 (target_thread_alive, target_find_new_threads): New.
3992 (debug_to_resume, debug_to_fetch_registers): Delete.
3993 (target_fetch_registers): New.
3994 (debug_to_store_registers): Delete.
3995 (target_store_registers): New.
3996 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
3997 (setup_target_debug): Adjust.
3999 * gdbcore.h (core_ops): Delete declaration.
4001 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
4002 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
4003 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
4004 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
4005 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
4006 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
4007 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
4008 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
4009 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
4010 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
4011 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
4012 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
4013 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
4014 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
4016 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
4017 * gdbarch.h, gdbarch.c: Regenerate.
4019 * sol2-tdep.c: Include "inferior.h".
4020 (sol2_core_pid_to_str): New.
4021 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
4023 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
4024 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
4025 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
4026 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
4028 2009-02-22 Doug Evans <dje@google.com>
4030 * exec.c (exec_file_attach): Fix comment.
4032 2009-02-22 Pedro Alves <pedro@codesourcery.com>
4034 Silence a few -Wmissing-prototypes warnings.
4037 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
4039 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
4040 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
4041 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
4042 (_initialize_amd64nbsd_tdep): ... this.
4043 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
4044 (_initialize_arm_linux_tdep): Declare.
4045 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
4046 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
4047 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
4048 * avr-tdep.c (avr_return_value): Make it static.
4049 (avr_frame_unwind_cache): Ditto.
4050 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
4051 (bsd_uthread_solib_loaded): Ditto.
4052 (bsd_uthread_solib_unloaded): Ditto.
4053 (bsd_uthread_target): Ditto.
4054 (_initialize_bsd_uthread): Declare.
4055 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
4056 (cris_frame_unwind_cache): Ditto.
4057 * frv-tdep.c (frv_return_value): Ditto.
4058 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
4059 (h8300h_use_struct_convention): Ditto.
4060 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
4062 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
4064 * hppabsd-tdep.c: Include hppabsd-tdep.h.
4065 (hppabsd_find_global_pointer): Make it static.
4066 * hppabsd-tdep.h: New.
4067 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
4068 (hppabsd_init_abi): Remove declaration.
4069 (_initialize_hppabsd_tdep): Remove declaration.
4070 (_initialize_hppanbsd_tdep): Declare.
4071 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
4072 (hppabsd_init_abi): Delete declaration.
4073 (hppaobsd_init_abi): Make it static.
4074 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
4075 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
4076 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
4077 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
4078 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
4079 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
4080 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
4081 (_initialize_m32c_tdep): Declare.
4082 * m32r-rom.c (_initialize_m32r_rom): Declare.
4083 * m32r-tdep.c (m32r_skip_prologue): Make it static.
4084 (m32r_return_value): Ditto.
4085 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
4086 (m68hc11_return_value): Ditto.
4087 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
4088 * m88k-tdep.c (m88k_frame_cache): Make it static.
4089 * mep-tdep.c (mep_gdb_print_insn): Ditto.
4090 (mep_return_value): Ditto.
4091 (_initialize_mep_tdep): Declare.
4092 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
4093 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
4094 (mips_linux_syscall_next_pc): Ditto.
4095 (_initialize_mips_linux_tdep): Declare.
4096 * mips-tdep.c (mips_single_step_through_delay): Make it static.
4097 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
4098 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
4099 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
4100 * mt-tdep.c (_initialize_mt_tdep): Declare.
4101 * nbsd-tdep.c: Include nbsd-tdep.h.
4102 * nto-tdep.c (find_load_phdr): Make it static.
4103 (_initialize_nto_tdep): Declare.
4104 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
4106 (_initialize_ppc_linux_tdep): Declare.
4107 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
4108 (m32r_insert_watchpoint, m32r_remove_watchpoint)
4109 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
4111 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
4112 * rs6000-nat.c: Include xcoffread.h.
4113 (find_toc_address): Don't extern declare get_toc_offset. Adjust
4114 to call xcoff_get_to_offset.
4115 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
4116 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
4117 (rs6000_skip_trampoline_code): Make static.
4118 * s390-tdep.c (s390_regset_from_core_section): Ditto.
4119 * sh-tdep.c (sh_register_reggroup_p): Ditto.
4120 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
4121 (_initialize_shnbsd_tdep): Declare.
4122 * solib-frv.c (displacement_from_map): Make static.
4123 (_initialize_frv_solib): Declare.
4124 * solib-irix.c (fetch_lm_info): Make static.
4125 (_initialize_irix_solib): Declare.
4126 * solib-som.c: Include solib-som.h.
4127 (som_solib_select): Line break.
4128 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
4129 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
4130 (_initialize_sparcnbsd_tdep): ... this.
4131 * spu-tdep.c (spu_software_single_step): Make it static.
4132 (_initialize_spu_tdep): Declare.
4133 * vax-tdep.c (vax_frame_cache): Make it static.
4134 * xcoffread.c: Include xcoffread.h.
4135 (get_toc_offset): Rename to ...
4136 (xcoff_get_toc_offset): ... this.
4137 (_initialize_xcoffread): Declare.
4139 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
4140 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
4142 (_initialize_xtensa_tdep): Declare.
4144 2008-02-21 Pedro Alves <pedro@codesorcery.com>
4146 Silence a few -Wmissing-prototypes warnings.
4149 * amd64-nat.c: Include "amd64-nat.h".
4150 * fork-child.c (_initialize_fork_child): Ditto.
4151 * gcore.c (_initialize_gcore): Ditto.
4152 * inf-ptrace.c: Include "inf-ptrace.h".
4153 (inf_ptrace_store_registers): Make it static.
4154 * linux-nat.c (linux_nat_terminal_ours): Make it static.
4155 (_initialize_linux_nat): Declare before definition.
4156 * linux-tdep.c: Include "linux-tdep.h".
4157 * linux-thread-db.c (_initialize_thread_db): Declare before
4159 * proc-service.c (_initialize_proc_service): Ditto.
4160 * remote.c (remote_send_printf): Make it static.
4161 * solib.c: Include "solib.h".
4162 * symfile-mem.c (_initialize_symfile_mem): Declare before
4164 * ada-lang.c (ada_la_decode, ada_match_name)
4165 (ada_suppress_symbol_printing, ada_is_array_type)
4166 (ada_value_ptr_subscript, ada_array_length)
4167 (ada_to_static_fixed_value): Make them static.
4168 (_initialize_ada_language): Declare before definition.
4169 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
4170 (ada_task_list_changed, ada_new_objfile_observer): Make them
4172 (_initialize_tasks): Declare before definition.
4173 * addrmap.c (_initialize_addrmap): Declare before definition.
4174 * auxv.c (default_auxv_parse): Make it static.
4175 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
4177 * breakpoint.c (remove_sal): Add line break.
4178 (expand_line_sal_maybe): Make it static.
4179 * cp-name-parser.y: Include "cp-support.h".
4180 * cp-valprint.c (cp_find_class_member): Make it static.
4181 * eval.c (value_f90_subarray): Ditto.
4182 * exceptions.c (print_any_exception): Ditto.
4183 * findcmd.c (_initialize_mem_search): Declare before definition.
4184 * frame.c (frame_observer_target_changed): Make it static.
4185 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
4186 * inf-child.c: Include "inf-child.h".
4187 * inferior.h (valid_inferior_id): Rename to ...
4188 (valid_gdb_inferior_id): ... this.
4189 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
4191 * jv-lang.c (java_language_arch_info): Make it static.
4192 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
4193 * osdata.c (info_osdata_command): Make it static.
4194 * regcache.c (regcache_observer_target_changed): Make it static.
4195 * reverse.c (_initialize_reverse): Declare before definition.
4196 * stabsread.c (cleanup_undefined_types_noname)
4197 (cleanup_undefined_types_1): Make them static.
4198 * symfile.c (place_section): Make it static.
4199 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
4200 * target-descriptions.c (_initialize_target_descriptions): Declare
4202 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
4203 (find_default_is_async_p, find_default_supports_non_stop): Make
4205 (target_supports_non_stop): Add prototype.
4206 (dummy_pid_to_str): Make it static.
4207 * utils.c (_initialize_utils): Declare before definition.
4208 * ada-exp.y (_initialize_ada_exp): Declare before definition.
4209 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
4210 * target.h (struct target_ops): Add a prototype to the
4211 to_can_execute_reverse callback.
4212 * macroscope.c (_initialize_macroscope): Declare before definition.
4213 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
4214 * python/python.c (_initialize_python): Declare before definition.
4215 * tui/tui-command.c: Include "tui/tui-command.h".
4216 * tui/tui-data.c (init_content_element, init_win_info): Make them
4218 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
4219 * tui/tui-interp.c (_initialize_tui_interp): Declare before
4221 * tui/tui-layout.c: Include "tui/tui-layout.h".
4222 (_initialize_tui_layout): Declare before definition.
4223 * tui/tui-regs.c: Include "tui/tui-regs.h".
4224 (tui_display_reg_element_at_line): Make it static.
4225 (_initialize_tui_regs): Declare before definition.
4226 * tui/tui-stack.c (_initialize_tui_stack): Declare before
4228 * tui/tui-win.c: Include "tui/tui-win.h".
4229 (_initialize_tui_win): Declare before definition.
4230 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
4231 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
4232 (tui_get_cmd_list): Add a prototype.
4233 * tui/tui-windata.c: Include tui-windata.h.
4234 * tui/tui-wingeneral.c (box_win): Make it static.
4235 * cli/cli-logging.c (show_logging_command): Make it static.
4236 (_initialize_cli_logging): Declare before definition.
4237 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
4240 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
4242 Extend use of i386_use_watchpoints to all i386 native files
4243 using hardware watchpoints.
4244 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
4245 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
4246 * windows-nat.c (init_windows_ops): Ditto.
4247 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
4248 * config/i386/nm-cygwin64.h: Ditto.
4249 * config/i386/nm-fbsd.h: Ditto.
4250 * config/i386/nm-go32.h: Ditto.
4252 2009-02-19 Joel Brobecker <brobecker@adacore.com>
4254 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
4256 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
4258 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
4259 (mi_interpreter_init): Register the above.
4260 * solib.c (clear_solib): Notify solib unload.
4261 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
4262 disable breakpoints on a.out targets.
4264 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
4266 * observer.c (observer_test_first_notification_function)
4267 (observer_test_second_notification_function)
4268 (observer_test_third_notification_function): Adjust prototype.
4270 2009-02-17 Pedro Alves <pedro@codesourcery.com>
4272 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
4273 (ALL_TARGET_OBS): Add dicos-tdep.o.
4274 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
4275 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
4277 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
4279 * dicos-tdep.h, dicos-tdep.c: New.
4280 * amd64-dicos-tdep.c: New.
4281 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
4282 inferior.h. Include dicos-tdep.h.
4283 (i386_dicos_init_abi): Call dicos_init_abi.
4284 (i386_dicos_bfd_has_symbol_p): Delete.
4285 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
4287 * NEWS: Mention x86-64 DICOS target support.
4289 2009-02-16 Doug Evans <dje@google.com>
4291 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
4292 All callers updated.
4293 (amd64_get_insn_details): Handle more 3-byte opcode insns.
4294 (amd64_breakpoint_p): Delete.
4295 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
4296 don't back up pc to the start of the int3.
4297 * i386-tdep.c: #include opcode/i386.h.
4298 (i386_skip_prefixes): New function.
4299 (i386_absolute_jmp_p): Constify argument.
4300 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
4301 (i386_breakpoint_p): Delete.
4302 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
4303 When fixing up after stepping an int3, don't back up pc to the start
4306 2009-02-16 Pedro Alves <pedro@codesourcery.com>
4308 * corelow.c (core_close): Don't hardcode the core's pid.
4309 (core_open): Find core threads before calling
4310 post_create_inferior.
4311 (add_to_thread_list, get_core_register_section): Take into account
4312 systems where the regset section names encode the pid of the
4315 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
4316 * gdbarch.h, gdbarch.c: Regenerate.
4318 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
4319 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
4320 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
4321 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
4323 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
4325 Include frame information for *stopped due to CLI commands.
4327 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
4328 * infcmd.c (finish_command_continuation): Pass '1' for
4329 'print_frame' parameter to the observer.
4330 * infrun.c (normal_stop): Don't print mi-specific information
4331 here. Pass 'stop_print_frame' to the 'print_frame' parameter
4333 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
4334 If we need to print frame, and current uiout is not the MI one,
4337 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
4339 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
4340 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
4342 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
4345 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
4346 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
4348 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
4350 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
4351 for DW_ATE_signed_char and DW_ATE_unsigned_char
4352 for pascal language.
4354 2009-02-11 Jim Meyering <meyering@redhat.com>
4355 Jan Kratochvil <jan.kratochvil@redhat.com>
4357 Avoid NULL dereference.
4358 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
4359 New variable func_type.
4361 2009-02-11 Pedro Alves <pedro@codesourcery.com>
4363 * gdbarch.c: Regenerate.
4365 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
4367 * p-lang.c (is_pascal_string_type): Fix comment.
4368 Determine exact size of char elements for GPC
4370 (pascal_printstr): Handle char width of 2 or 4.
4371 * p-valprint.c (pascal_val_print): Handle char
4374 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
4376 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
4377 inside the loop. Only call addrmap_set_empty if the compilation unit
4378 had DW_AT_high_pc and DW_AT_low_pc. Update call to
4379 scan_partial_symbols.
4380 (scan_partial_symbols): Take NEED_PC argument and pass it along with
4382 (add_partial_namespace): Take NEED_PC argument and pass it through.
4383 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
4386 2009-02-07 Pedro Alves <pedro@codesourcery.com>
4388 * NEWS: Mention inspecting extra signal information, $_siginfo,
4389 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
4391 2009-02-07 Pedro Alves <pedro@codesourcery.com>
4393 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
4396 2009-02-06 Pedro Alves <pedro@codesourcery.com>
4398 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
4399 (compat_timer_t, compat_clock_t, struct compat_timeval)
4400 (compat_sigval_t, compat_siginfo_t): New types.
4401 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
4402 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
4403 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
4404 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
4405 (amd64_linux_siginfo_fixup): New.
4406 * linux-nat.c (linux_nat_siginfo_fixup): New.
4407 (siginfo_fixup): New.
4408 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
4409 siginfo layout expected by ptrace and the siginfo layout of the
4411 (linux_nat_set_siginfo_fixup): New.
4412 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
4414 2009-02-06 Pedro Alves <pedro@codesourcery.com>
4416 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
4417 * infrun.c (siginfo_value_read, siginfo_value_write): New.
4418 (siginfo_value_funcs): New.
4419 (siginfo_make_value): New.
4420 (_initialize_infrun): Create the $_siginfo convenience variable.
4421 * gdbtypes.h (append_composite_type_field_aligned): Declare.
4422 * gdbtypes.c (append_composite_type_field): Rename to...
4423 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
4424 argument. Handle it.
4425 (append_composite_type_field): Rewrite on top of
4426 append_composite_type_field_aligned.
4427 * value.h (internalvar_make_value): New typedef.
4428 (struct internalvar) <make_value>: New field.
4429 (create_internalvar_type_lazy): Declare.
4430 * value.c (create_internalvar): Clear make_value.
4431 (create_internalvar_type_lazy): New.
4432 (value_of_internalvar): If make_value is set use it.
4433 (preserve_values): Skip internal variables that don't have a
4435 * gdbarch.sh (get_siginfo_type): New.
4436 * gdbarch.h, gdbarch.c: Regenerate.
4438 * linux-tdep.h, linux-tdep.c: New.
4439 * amd64-linux-tdep.c: Include "linux-tdep.h".
4440 (amd64_linux_init_abi): Register linux_get_siginfo_type and
4441 linux_get_siginfo_mapper.
4442 * i386-linux-tdep.c: Include "linux-tdep.h".
4443 (i386_linux_init_abi): Register linux_get_siginfo_type and
4444 linux_get_siginfo_mapper.
4445 * arm-linux-tdep.c: Include "linux-tdep.h".
4446 (i386_linux_init_abi): Register linux_get_siginfo_type and
4447 linux_get_siginfo_mapper.
4449 * linux-nat.c (linux_xfer_siginfo): New.
4450 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
4451 * remote.c (PACKET_qXfer_siginfo_read)
4452 (PACKET_qXfer_siginfo_write): New.
4453 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
4454 "qXfer:siginfo:write" features.
4455 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
4456 (_initialize_remote): Add "set/show remote read-siginfo-object"
4457 and "set/show remote write-siginfo-object" commands.
4459 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
4460 (HFILES_NO_SRCDIR): Add linux-tdep.h.
4461 (ALLDEPFILES): Add linux-tdep.c.
4463 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
4464 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
4467 2009-02-06 Jim Blandy <jimb@codesourcery.com>
4468 Daniel Jacobowitz <dan@codesourcery.com>
4469 Vladimir Prus <vladimir@codesourcery.com>
4470 Pedro Alves <pedro@codesourcery.com>
4472 * defs.h (enum lval_type): New value: lval_computed.
4473 * value.h (struct lval_funcs): New type.
4474 (allocate_computed_value, value_computed_funcs)
4475 (value_computed_closure): New declarations.
4476 * value.c (struct value): Add a structure to the location union
4477 for computed lvalues, containing 'funcs' and 'closure' members.
4478 (allocate_computed_value, value_computed_funcs)
4479 (value_computed_closure): New functions.
4480 (value_free): For computed lvalues, call the closure's
4481 'free_closure' function before freeing the value itself.
4482 (value_copy): If we're copying an lval_computed value, call the
4483 closure's 'copy_closure' function.
4484 (set_value_component_location): If the original value is a
4485 computed lvalue, then call the closure's 'copy_closure' function.
4486 (value_of_internalvar): If an internal variable's value is a
4487 computed lvalue, make retrieving its value produce an equivalent
4489 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
4490 their read function.
4491 (value_assign): Assign to computed lvalues by calling their write
4494 2009-02-06 Pedro Alves <pedro@codesourcery.com>
4496 * linux-nat.c (linux_nat_wait): Adjust.
4497 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
4498 * linux-nat.h (thread_db_init): Delete declaration.
4499 * linux-thread-db.c (target_beneath): Delete.
4500 (thread_db_init): Delete.
4501 (thread_db_detach): Use find_target_beneath.
4502 (thread_db_wait): Adjust interface. Use find_target_beneath.
4503 (thread_db_mourn_inferior): Use find_target_beneath.
4504 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
4505 (thread_db_async_mask): Delete.
4506 (thread_db_pid_to_str): Adjust interface. Use
4507 find_target_beneath.
4508 (thread_db_get_thread_local_address): Adjust interface. Use
4509 find_target_beneath.
4510 (init_thread_db_ops): Delete references to delete functions.
4511 * target.c (update_current_target): Don't inherit or default
4512 to_wait. Don't inherit to_pid_to_str and
4513 to_get_thread_local_address.
4514 (target_translate_tls_address): Look for a pushed target that
4515 implements to_get_thread_local_address, and use it instead of
4516 checking for target_get_thread_local_address_p.
4517 (target_wait, target_pid_to_str): Reimplement as functions.
4518 (dummy_pid_to_str): New.
4519 (init_dummy_target): Register it.
4520 (debug_to_wait): Delete.
4521 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
4522 to_get_thread_local_address accept a pointer to struct target_ops.
4523 (target_wait): Delete macro, and declare as function.
4524 (target_pid_to_str): Likewise.
4525 (target_get_thread_local_address)
4526 (target_get_thread_local_address_p): Delete.
4527 (noprocess): Add NORETURN and ATTR_NORETURN tags.
4528 * inf-ptrace.c (inf_ptrace_wait): Adjust.
4529 (inf_ptrace_pid_to_str): New.
4530 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
4531 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
4532 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
4533 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
4535 * corelow.c (core_pid_to_str): Adjust.
4536 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
4537 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
4538 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
4539 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
4540 * hpux-thread.c (hpux_thread_wait): Adjust.
4541 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
4542 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
4543 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
4544 * procfs.c (procfs_pid_to_str): Adjust.
4545 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
4546 * remote-mips.c (mips_wait): Adjust.
4547 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
4548 * remote.c (remote_wait, remote_pid_to_str)
4549 (remote_get_thread_local_address): Adjust.
4550 * rs6000-nat.c (rs6000_wait): Adjust.
4551 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
4552 (sol_thread_wait, solaris_pid_to_str): Adjust.
4553 * spu-linux-nat.c (spu_child_wait): Adjust.
4554 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
4556 2009-02-06 Tom Tromey <tromey@redhat.com>
4558 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
4559 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
4560 (python-cmd.o): New target.
4561 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
4562 completer prototype.
4563 (add_cmd): Initialize destroyer member of cmd_list_element. Use
4564 make_symbol_completion_list_fn as completer.
4565 (delete_cmd): Call destroyer if one is set.
4566 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
4567 completer member. Add destroyer member.
4568 (set_cmd_completer): Add self parameter to
4569 completer prototype.
4570 * command.h (set_cmd_completer): Add cmd parameter to
4571 completer prototype.
4572 * completer.c (noop_completer, filename_completer,
4573 location_completer, expression_completer, command_completer): Adapt
4574 to new completer prototype.
4575 (complete_line_internal): Pass new parameter to completer function.
4576 * completer.h (noop_completer, filename_completer,
4577 location_completer, expression_completer, command_completer): Adapt
4578 prototypes to new completer prototype.
4579 * interps.c (interpreter_completer): Adapt to new completer
4581 * python/python-cmd.c: New file.
4582 * python/python-internal.h (gdbpy_initialize_commands): Add
4584 (gdbpy_doc_cst): Add forward declaration.
4585 * python/python.c (gdbpy_doc_cst): Declare.
4586 (_initialize_python): Call gdbpy_initialize_commands. Initialize
4588 * symtab.c (make_symbol_completion_list_fn): New function.
4589 * symtab.h (make_symbol_completion_list_fn): Add prototype.
4591 2009-02-06 Pedro Alves <pedro@codesourcery.com>
4593 * target.c (target_get_osdata): Check for equal or higher than
4594 process_stratum, not dummy_stratum.
4596 2009-02-06 Pedro Alves <pedro@codesourcery.com>
4598 * remote.c (extended_remote_can_run): Delete.
4599 (init_remote_ops): Don't register it.
4600 * target.c (target_get_osdata): Don't check for target_can_run.
4601 Instead any target that has already been pushed, otherwise
4602 fallback to the default run target.
4604 2009-02-06 Pedro Alves <pedro@codesourcery.com>
4606 * target.c (target_create_inferior, target_detach)
4607 (target_mourn_inferior, target_attach, target_close): Do target
4609 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
4610 (debug_to_mourn_inferior, debug_to_close): Delete.
4611 (setup_target_debug): Adjust.
4613 2009-02-05 Pedro Alves <pedro@codesourcery.com>
4615 * target.h (target_stopped_data_address_p): Delete declaration,
4616 and don't define as macro.
4617 * target.c (target_stopped_data_address_p): Delete.
4619 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
4620 Tom Tromey <tromey@redhat.com>
4622 * python/python-utils.c (target_string_to_unicode): New function.
4623 * python/python-internal.h (target_string_to_unicode): New prototype.
4624 * python/python-value.c (valpy_string): New function.
4625 (value_object_methods): Add `string' entry.
4627 2009-02-05 Pedro Alves <pedro@codesourcery.com>
4629 * target.h (target_tid_to_str): Delete.
4630 * thread.c (print_thread_info, thread_apply_all_command)
4631 (thread_apply_command, thread_command, do_captured_thread_select):
4632 Use target_pid_to_str instead of target_tid_to_str.
4633 * linux-fork.c (delete_fork_command): Likewise.
4635 2009-02-05 Pedro Alves <pedro@codesourcery.com>
4637 * frame.c (has_stack_frames): Make public.
4638 (get_prev_frame): Don't allow a NULL this_frame anymore.
4639 * frame.h (has_stack_frames): Declare.
4640 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
4641 to get_prev_frame, instead start at get_current_frame.
4642 (varobj_create): Check has_stack_frames before getting any frame;
4643 eliminate one usage of deprecated_safe_get_selected_frame.
4645 2009-02-05 Tom Tromey <tromey@redhat.com>
4646 Thiago Jung Bauermann <bauerman@br.ibm.com>
4648 * python/python.c (GdbMethods): Move to bottom of file.
4649 (get_parameter, execute_gdb_command, gdbpy_write,
4650 gdbpy_flush): Remove forward declarations.
4651 (eval_python_from_control_command): Fix error checking of function
4652 PyRun_SimpleString. Fix error string.
4653 (python_command): Likewise.
4654 (execute_gdb_command): Added from_tty argument.
4656 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
4658 * language.h (language_dfn): Add la_get_string member.
4659 (LA_GET_STRING): New macro.
4660 (default_get_string): New prototype.
4661 * language.c (default_get_string): New function.
4662 (unknown_language_defn, auto_language_defn, local_language_defn): Use
4663 default_get_string for la_get_string.
4664 * c-lang.c (c_get_string): New function.
4665 (c_language_defn, cplus_language_defn, asm_language_defn): Use
4666 c_get_string for la_get_string.
4667 (minimal_language_defn): Likewise
4668 * ada-lang.c (ada_language_defn): Likewise.
4669 * f-lang.c (f_language_defn): Use default_get_string for
4671 * jv-lang.c (java_language_defn): Likewise.
4672 * m2-lang.c (m2_language_defn): Likewise.
4673 * objc-lang.c (objc_language_defn): Likewise.
4674 * p-lang.c (p_language_defn): Likewise.
4675 * scm-lang.c (scm_language_defn): Likewise.
4676 * typeprint.c (type_to_string): New function.
4677 * value.h (type_to_string): New prototype.
4678 * valprint.c (val_print_string): Factor out code for reading string
4679 from the inferior into its own function. Put 2 spaces after period
4681 (read_string): New function.
4682 * valprint.h (read_string): New prototype.
4684 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
4685 Tom Tromey <tromey@redhat.com>
4687 PR breakpoints/8079:
4688 * breakpoint.c (print_one_breakpoint): Use exp_string field
4689 to display expression of watchpoints.
4690 (mention): Likewise.
4691 (watch_command_1): Remove trailing whitespace from expression.
4692 * printcmd.c (struct display) <exp_string>: New field.
4693 (display_command): Set exp_string.
4694 (free_display): Free exp_string.
4695 (clear_displays): Use free_display.
4696 (do_one_display): Print exp_string.
4697 (display_info): Likewise.
4699 2009-02-04 Tom Tromey <tromey@redhat.com>
4700 Thiago Jung Bauermann <bauerman@br.ibm.com>
4701 Phil Muldoon <pmuldoon@redhat.com>
4703 * python/python-internal.h (gdbpy_get_value_from_history): Rename
4704 prototype to gdbpy_history.
4705 (gdbpy_is_string): Declare.
4706 (python_string_to_host_string): Declare.
4707 * python/python-utils.c (gdbpy_is_string): New function.
4708 (unicode_to_encoded_string): New function.
4709 (unicode_to_target_string): Use it.
4710 (python_string_to_host_string): New function.
4711 * python/python-value.c (valpy_address): New function.
4712 (convert_value_from_python): Use gdbpy_is_string. Change to throw
4713 Python exception instead of a GDB exception on error. Properly check
4715 (valpy_getitem): Convert field name to host string. Handle array
4716 accesses. Adapt to new behaviour of convert_value_from_python.
4717 (valpy_new): Adapt to new behaviour of convert_value_from_python.
4718 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
4719 VALPY_BITXOR, VALPY_BITOR>: New constants.
4720 (valpy_binop): Update. Adapt to new behaviour of
4721 convert_value_from_python.
4722 (valpy_invert): New function.
4723 (valpy_lsh): Likewise.
4724 (valpy_rsh): Likewise.
4725 (valpy_and): Likewise.
4726 (valpy_or): Likewise.
4727 (valpy_xor): Likewise.
4728 (valpy_richcompare): Call convert_value_from_python instead of doing
4730 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
4731 (gdbpy_get_value_from_history): Rename
4732 function to gdbpy_history.
4733 (gdbpy_initialize_values): Don't set tp_new.
4734 (value_object_type): Add valpy_new.
4735 (value_object_methods): Add `address' entry.
4736 (value_object_as_number): Update for new methods.
4737 * python/python.c (GdbMethods): Rename entry from
4738 `get_value_from_history' to `history'.
4740 2009-02-04 Jerome Guitton <guitton@adacore.com>
4742 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
4743 of type to guard against a crash.
4745 2009-02-04 Jerome Guitton <guitton@adacore.com>
4747 * value.c (value_from_contents_and_address): Always return
4748 a lval_memory value, even if address is null.
4750 2009-02-04 Tristan Gingold <gingold@adacore.com>
4752 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
4753 (amd64_darwin_sigcontext_addr): Ditto.
4754 (darwin_dwarf_signal_frame_p): Ditto.
4755 (i386_darwin_init_abi): Handle signal frames, use the const for
4757 (x86_darwin_init_abi_64): Ditto.
4759 2009-02-04 Tristan Gingold <gingold@adacore.com>
4761 * i386-tdep.c (i386_sigtramp_p): Make it public.
4762 * i386-tdep.h (i386_sigtramp_p): Declare.
4764 2009-02-04 Tristan Gingold <gingold@adacore.com>
4766 * machoread.c (macho_symfile_read): Read minsymtab also from
4768 (macho_symfile_read): Try to read dwarf2 frame info from main
4769 object file, but not from OSO files.
4770 (macho_symfile_offsets): Update section names for latest BFD
4772 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
4773 (x86_darwin_init_abi_64): Ditto.
4774 * solib-darwin.c: New file.
4775 * solib-darwin.h: New file.
4776 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
4778 2009-02-04 Tristan Gingold <gingold@adacore.com>
4780 * solist.h (struct target_so_ops): Comment fallback behavior for
4783 2009-02-03 Tom Tromey <tromey@redhat.com>
4785 * completer.c (add_struct_fields): Check type_name against NULL
4788 2009-02-03 Joel Brobecker <brobecker@adacore.com>
4790 * MAINTAINERS: Update Elena's email address.
4792 2009-02-02 Joel Brobecker <brobecker@adacore.com>
4794 * breakpoint (update_watchpoint): Minor comment adjustment.
4796 2009-02-02 Tom Tromey <tromey@redhat.com>
4799 * completer.c (count_struct_fields): Count method names.
4800 (add_struct_fields): Add matching method names.
4802 2009-02-02 Doug Evans <dje@google.com>
4804 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
4805 doing any further tcl/tk configury. Don't configure gdbtk if
4806 tcl or tk check fails.
4807 * aclocal.m4: Regenerate.
4808 * configure: Regenerate.
4810 2009-02-02 Tom Tromey <tromey@redhat.com>
4813 * valops.c (find_overload_match): Follow typedefs before taking
4814 address of object argument.
4816 2009-02-01 Doug Evans <dje@google.com>
4818 * target.h (target_waitstatus_to_string): Declare.
4819 * target.c (target_waitstatus_to_string): New function. Copied from
4820 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
4821 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
4822 TARGET_WAITKIND_NO_HISTORY.
4823 (debug_to_wait): Call it.
4824 * infrun.c (wait_for_inferior): If debug_infrun, print result of
4826 (fetch_inferior_event): Ditto.
4828 2009-01-30 Tom Tromey <tromey@redhat.com>
4830 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
4832 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
4835 * thread.c (do_captured_list_thread_ids): Report the current
4838 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
4840 * breakpoint.c (create_breakpoint, create_breakpoints)
4841 (break_command_really, set_breakpoint): New parameter enabled.
4842 (create_breakpoint, break_command_really): Make breakpoint
4843 disabled if so requested.
4844 * breakpoint.h (set_breakpoint): New parameter enabled.
4845 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
4847 2009-01-28 Doug Evans <dje@google.com>
4849 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
4850 (amd64_displaced_step_fixup): Declare.
4851 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
4852 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
4853 and make static global.
4854 (amd64_arch_regmap_len): New static global.
4855 (amd64_arch_reg_to_regnum): New function.
4856 (struct amd64_insn): New struct.
4857 (struct displaced_step_closure): New struct.
4858 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
4859 (rex_prefix_p,skip_prefixes)
4860 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
4861 (amd64_insn_length,amd64_get_unused_input_int_reg)
4862 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
4863 (amd64_displaced_step_copy_insn)
4864 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
4865 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
4866 (amd64_displaced_step_fixup): New functions.
4867 * amd64-linux-tdep.c: #include arch-utils.h.
4868 (amd64_linux_init_abi): Install displaced stepping support.
4870 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
4871 Jerome Guitton <guitton@adacore.com>
4873 * configure, config.in: Regenerated.
4874 * configure.ac: Add --with-system-gdbinit.
4875 * main.c (get_init_files): New.
4876 (captured_main): Use get_init_files. Load system gdbinit before
4878 (print_gdb_help): Print location of init files.
4880 2009-01-28 Pedro Alves <pedro@codesourcery.com>
4882 * corefile.c (generic_search): Delete disabled code.
4883 * gdbcore.h (generic_search): Delete declaration.
4885 2009-01-26 Pedro Alves <pedro@codesourcery.com>
4887 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
4888 parent to the child.
4889 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
4890 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
4891 remove_breakpoints to remove breakpoints from the parent.
4893 2009-01-26 Pedro Alves <pedro@codesourcery.com>
4895 PR backtrace/9458, PR backtrace/8864:
4896 * frame.c (create_new_frame): Update the frame's cached PC before
4897 finding its unwinder. Use frame_id_build to build the new frame's
4899 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
4900 array values from the ``args'' array values.
4902 2009-01-26 Pedro Alves <pedro@codesourcery.com>
4904 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
4905 (create_array_type, create_set_type, init_flags_type)
4906 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
4907 with a call to XZALLOC or XCALLOC, and pairs of calls to
4908 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
4910 2009-01-26 Pedro Alves <pedro@codesourcery.com>
4912 Add "maint set|show internal-error|internal-warning quit|corefile
4913 ask|yes|no" commands.
4916 * utils.c (internal_problem_ask, internal_problem_yes)
4917 (internal_problem_no, internal_problem_modes): New.
4918 (struct internal_problem): Remove FIXME. Make should_quit and
4919 should_dump_core types to char *.
4920 (internal_vproblem, internal_error_problem)
4921 (internal_warning_problem): Adjust.
4922 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
4924 (add_internal_problem_command): New.
4925 (_initialize_utils): New.
4927 2009-01-25 Pedro Alves <pedro@codesourcery.com>
4929 * infcmd.c (program_info): Use paddress instead of casting stop_pc
4932 2009-01-24 Pedro Alves <pedro@codesourcery.com>
4934 * infrun.c (normal_stop): Don't call
4935 deprecated_update_frame_pc_hack.
4936 * frame.c (deprecated_update_frame_pc_hack)
4937 (deprecated_update_frame_base_hack): Delete, and ...
4938 (create_new_frame): ... inline here.
4939 * frame.h (deprecated_update_frame_pc_hack)
4940 (deprecated_update_frame_base_hack): Delete declarations.
4942 2009-01-23 Pedro Alves <pedro@codesourcery.com>
4944 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
4945 * cli/cli-setshow.c (do_setshow_command): Handle it.
4946 * command.h (enum var_types): Add var_zuinteger.
4947 (add_setshow_zuinteger_cmd): Declare.
4949 * valprint.c (_initialize_valprint): Change the set input-radix
4950 and set output-radix commands to zuinteger type.
4952 2009-01-23 Pedro Alves <pedro@codesourcery.com>
4955 * infrun.c (normal_stop): Tag threads as stopped, and run the
4956 hook-stop before printing the stack frame.
4958 2009-01-22 Pedro Alves <pedro@codesourcery.com>
4961 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
4964 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
4966 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
4969 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
4972 * infcmd.c (signal_command): Do not specify a resume PC.
4974 2009-01-19 Doug Evans <dje@google.com>
4976 * dummy-frame.c (dummy_frame): Replace regcache member with
4978 (dummy_frame_push): Replace caller_regcache arg with caller_state.
4979 All callers updated.
4980 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
4981 (dummy_frame_pop): Rewrite. Verify requested frame is in the
4982 dummy frame stack. Restore program state.
4983 (cleanup_dummy_frames): Rewrite.
4984 (dummy_frame_sniffer): Update. Make static.
4985 * dummy-frame.h (regcache,frame_info): Delete forward decls.
4986 (inferior_thread_state): New forward decl.
4987 (dummy_frame_push): Update prototype.
4988 * frame.c (frame_pop): dummy_frame_pop now does all the work for
4990 * infcall.c (breakpoint_auto_delete_contents): Delete.
4991 (get_function_name,run_inferior_call): New fns.
4992 (call_function_by_hand): Simplify by moving some code to
4993 get_function_name, run_inferior_call. Inferior function call wrapped
4994 in TRY_CATCH so there's less need for cleanups and all exits from
4995 proceed are handled similarily. Detect program exit.
4996 Detect program stopping in a different thread.
4997 Make error messages more consistent.
4998 * inferior.h (inferior_thread_state): Declare (opaque type).
4999 (save_inferior_thread_state,restore_inferior_thread_state,
5000 make_cleanup_restore_inferior_thread_state,
5001 discard_inferior_thread_state, get_inferior_thread_state_regcache):
5003 (save_inferior_status): Update prototype.
5004 * infrun.c: (normal_stop): When stopped for the completion of an
5005 inferior function call, verify the expected stack frame kind.
5006 (inferior_thread_state): New struct.
5007 (save_inferior_thread_state,restore_inferior_thread_state,
5008 do_restore_inferior_thread_state_cleanup,
5009 make_cleanup_restore_inferior_thread_state,
5010 discard_inferior_thread_state,
5011 get_inferior_thread_state_regcache): New functions.
5012 (inferior_status): Move stop_signal, stop_pc, registers to
5013 inferior_thread_state. Remove restore_stack_info.
5014 (save_inferior_status): Remove arg restore_stack_info.
5015 All callers updated. Remove saving of state now saved by
5016 save_inferior_thread_state.
5017 (restore_inferior_status): Remove restoration of state now done by
5018 restore_inferior_thread_state.
5019 (discard_inferior_status): Remove freeing of registers, now done by
5020 discard_inferior_thread_state.
5022 2009-01-18 Pedro Alves <pedro@codesourcery.com>
5024 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
5025 at a time, times NUM_TO_SCROLL.
5026 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
5027 fetch the selected frame if there is no stack.
5029 2009-01-18 Pedro Alves <pedro@codesourcery.com>
5032 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
5034 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
5035 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
5036 is thrown while handling an event, finish the thread state.
5037 (normal_stop): Use finish_thread_state cleanup.
5038 * infcmd.c (run_command_1): If an error is thrown while starting
5039 the inferior, finish the thread state.
5041 2009-01-18 Pedro Alves <pedro@codesourcery.com>
5043 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
5044 skip breakpoints without a location (pending breakpoints).
5046 2009-01-18 Pedro Alves <pedro@codesourcery.com>
5049 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
5051 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
5053 * thread.c (thread_command): Move call to annotate_thread_changed
5055 (do_captured_thread_select): ... here, to avoid printing an
5056 annotation if the thread change generates an exception.
5058 2009-01-16 Joel Brobecker <brobecker@adacore.com>
5060 * NEWS: Document x86_64/MinGW as a new native configuration.
5062 2009-01-16 Joel Brobecker <brobecker@adacore.com>
5064 * NEWS: Move the documentation of "info os processes" to
5065 the appropriate section (documenting the new commands).
5067 2009-01-15 Doug Evans <dje@google.com>
5069 * target.h (target_signal_to_string): Make return type const char *.
5070 (target_signal_to_name): Ditto.
5071 (target_signal_from_name): Make arg const char *.
5072 * infrun.c (sig_print_info): Update.
5073 * signals/signals.c (signals): Make array and struct members const.
5074 (target_signal_to_string): Make return type const char *.
5075 (target_signal_to_name): Ditto.
5076 (target_signal_from_name): Make arg const char *.
5078 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
5079 Tristan Gingold <gingold@adacore.com>
5081 * solist.h (struct target_so_ops): New member bfd_open.
5082 (solib_find): Add prototype.
5083 (solib_bfd_fopen): Add prototype.
5084 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
5085 from solib_bfd_open.
5086 (solib_bfd_open): Use ops->bfd_open override if present. Call
5087 solib_find and solib_bfd_open otherwise.
5089 * objfiles.h (OBJF_KEEPBFD): New define.
5090 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
5091 objfile flag is set.
5092 * solib.c (symbol_add_stub): Do not allocate second BFD for
5093 shared library; use OBJF_KEEPBFD flag on solib objfile.
5095 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
5097 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
5099 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
5101 * value.h (address_of_variable): Add prototype.
5102 (locate_var_value): Remove prototype.
5104 * findvar.c (read_var_value): Do not attempt to default frame
5106 (locate_var_value): Remove function.
5107 * valops.c (value_of_variable): Retrieve selected frame for
5108 symbols that require a frame when called with NULL block.
5109 * valops.c (address_of_variable): New function.
5111 * eval.c (evaluate_subexp_for_address): Call address_of_variable
5112 instead of calling locate_var_value.
5113 (evaluate_subexp_with_coercion): Likewise.
5115 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
5117 * NEWS: Document "define" for prefixed commands.
5118 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
5119 show_user_1 for prefix commands.
5120 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
5121 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
5122 commands. Return the containing command list.
5123 (define_command, document_command): Update to handle prefix commands.
5124 (show_user_1): Add prefix and name arguments. Handle prefix
5126 * cli/cli-script.h (show_user_1): Update prototype.
5128 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
5130 * ser-mingw.c (console_select_thread): Add return to make
5132 (pipe_select_thread): Likewise.
5133 (file_select_thread): Likewise.
5135 2009-01-14 Pedro Alves <pedro@codesourcery.com>
5137 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
5140 2009-01-14 Pedro Alves <pedro@codesourcery.com>
5142 * remote.c (extended_remote_mourn_1): Invalidate our notion of
5143 current general thread.
5145 2009-01-14 Pedro Alves <pedro@codesourcery.com>
5147 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
5148 without a live selected thread.
5150 2009-01-14 Joel Brobecker <brobecker@adacore.com>
5152 Update the copyright notice of some of the files I missed
5153 in the previous copyright update.
5155 2009-01-14 Joel Brobecker <brobecker@adacore.com>
5157 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
5158 base address instead of casting it to DWORD.
5160 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
5162 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
5163 for NULL frame pointers.
5165 2009-01-13 Mark Kettenis <kettenis@gnu.org>
5167 * utils.c (host_address_to_string): Reimplement in a way that
5168 avoids the cast of the address to long.
5170 2009-01-13 Joel Brobecker <brobecker@adacore.com>
5172 * mdebugread.c (parse_symbol): Save the symbol private data
5173 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
5174 (psymtab_to_symtab_1): Likewise.
5175 (parse_procedure): Declare variable "e" only in the scope
5176 where it is used. Extract the symbol private data using
5179 2009-01-13 Jim Blandy <jimb@codesourcery.com>
5181 Abstract out common code for copying value locations.
5183 * value.h (set_value_component_location): New declaration.
5184 * value.c (set_value_component_location): New function.
5185 (value_primitive_field): Use it.
5186 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
5187 * valops.c (search_struct_field, value_slice): Same.
5188 * ada-lang.c (coerce_unspec_val_to_type)
5189 (ada_value_primitive_packed_val): Same.
5191 2009-01-13 Joel Brobecker <brobecker@adacore.com>
5193 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
5195 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
5197 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
5199 * i386-cygwin-tdep.c: Ditto.
5200 * i386-windows-nat.c: Ditto.
5201 * windows-nat.h: Ditto.
5202 * windows-tdep.c: Ditto.
5203 * windows-tdep.h: Ditto.
5204 * windows-nat.c: Ditto.
5205 (cygwin_load_start): Redefine as CORE_ADDR.
5206 (cygwin_load_end): Ditto.
5207 (windows_make_so): Coerce result of address arithmetic to uintptr_t
5208 before coercing to CORE_ADDR to avoid a compiler warning.
5209 (handle_exception): Define addr as CORE_ADDR and coerce
5210 ExceptionAddress to uintptr_t before assigining to avoid a compiler
5212 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
5215 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5217 Fix linking with --enable-targets=all:
5218 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
5219 (HFILES_NO_SRCDIR): Add windows-tdep.h.
5220 (ALLDEPFILES): Add windows-tdep.c.
5222 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
5224 * win32-nat.h: Delete.
5225 * windows-nat.h: Rename from win32-nat.h.
5226 * win32-nat.c: Delete.
5227 * windows-nat.c: Rename from win32-nat.c.
5228 * win32-termcap.c: Delete.
5229 * windows-termcap.c: Rename from win32-termcap.c.
5230 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
5231 * configure.ac: Handle rename from win32-termcap.c ->
5233 * configure: Regenerate.
5234 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
5235 -> windows-termcap.c.
5236 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
5238 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
5239 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
5241 (win32_make_so): Handle cygwin compiler warning due to change of
5242 load_addr from DWORD to LPVOID.
5243 (handle_load_dll): Use %p in format string to properly print address
5244 and avoid a compiler warning.
5245 (DEBUG_EXCEPTION_SIMPLE): Ditto.
5246 (handle_exception): Ditto.
5247 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
5248 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
5250 * config/i386/mingw.mh: Ditto.
5251 * config/i386/mingw64.mh: Ditto.
5253 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5255 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
5256 arrayprint_recurse_level to a parameter. Update all the callers. New
5257 comment at autovariables.
5259 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5261 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
5264 2009-01-11 Joel Brobecker <brobecker@adacore.com>
5266 * target.c (target_xfer_partial): Use host_address_to_string to
5267 print the address of readbuf and writebuf. Cast the address of
5268 elements inside the myaddr buffer into intptr_t.
5269 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
5270 Cast the address of elements inside the myaddr buffer into
5273 2009-01-11 Joel Brobecker <brobecker@adacore.com>
5275 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
5276 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
5277 * configure.host, configure.tgt: Add handling for x86_64/windows.
5278 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
5279 and amd64-windows-tdep.c.
5281 2009-01-11 Joel Brobecker <brobecker@adacore.com>
5283 * win32-tdep.h, win32-tdep.c: New files.
5284 * i386-cygwin-tdep.h: Delete.
5285 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
5287 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
5288 * win32-nat.c: Likewise.
5289 * configure.tgt: Add win32-tdep.o to the list of target object
5290 files for i386-cygwin and i386-mingw targets.
5292 2009-01-11 Joel Brobecker <brobecker@adacore.com>
5294 * win32-nat.h: New file.
5295 * win32-nat.c (mappings): Initialize to NULL.
5296 (win32_set_context_register_offsets): New function.
5297 * i386-windows-nat.c: New file.
5298 (mappings): Moved here from win32-nat.c.
5299 (_initialize_i386_windows_nat): New function.
5300 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
5301 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
5303 2009-01-09 Andreas Schwab <schwab@suse.de>
5305 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
5307 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
5309 * gdbtypes.c (append_composite_type_field): Correct the location of
5312 2009-01-09 Pedro Alves <pedro@codesourcery.com>
5314 * defs.h (deprecated_error_hook): Delete declaration.
5315 * interps.c (clear_interpreter_hooks): Adjust.
5316 * remote-sim.c (gdb_os_error): Don't try to call
5317 deprecated_error_hook. No need to call exit anymore.
5318 * top.c (deprecated_error_hook): Delete.
5320 2009-01-09 Joel Brobecker <brobecker@adacore.com>
5322 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
5323 to print the address of the gdbarch pointer.
5325 2009-01-09 Joel Brobecker <brobecker@adacore.com>
5327 * gdbarch.sh: Fix all the compilation errors on amd64-windows
5328 due to casting a pointer to a long when printing a function
5329 address. Instead, use host_address_to_string to convert our
5330 address to a string.
5331 * gdbarch.c: Regenerate.
5333 2009-01-09 Joel Brobecker <brobecker@adacore.com>
5335 * event-top.c (async_disconnect, async_stop_sig): use "raise"
5336 instead of "kill" to raise a signal.
5338 2009-01-09 Joel Brobecker <brobecker@adacore.com>
5340 * win32-nat.c (get_module_name): Change the type of parameter
5341 "base_address" to LPVOID. Remove unnecessary cast.
5342 (struct lm_info): Change type of load_addr to LPVOID.
5343 (win32_make_so): Change the type of parameter "load_addr"
5344 to LPVOID. Remove some unnecessary casts.
5345 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
5346 (win32_xfer_shared_libraries): Add missing cast.
5348 2009-01-09 Joel Brobecker <brobecker@adacore.com>
5350 * win32-nat.c (has_detach_ability, set_process_privilege):
5351 Cast the result of GetProcAddress to (void *) to avoid
5352 a compilation warning.
5354 2009-01-09 Joel Brobecker <brobecker@adacore.com>
5356 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
5359 2009-01-09 Joel Brobecker <brobecker@adacore.com>
5361 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
5362 definition of local variable "done".
5363 (info_w32_command, handle_exception): Remove unnecessary cast.
5365 2009-01-09 Joel Brobecker <brobecker@adacore.com>
5367 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
5368 DebugSetProcessKillOnExit. Update all uses in this file.
5369 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
5370 Update all uses in this file.
5372 2009-01-09 Joel Brobecker <brobecker@adacore.com>
5374 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
5375 and use it when pushing the target.
5376 (win32_attach, win32_create_inferior): Update call to
5377 do_initial_win32_stuff.
5378 (win32_detach, win32_mourn_inferior): Use our ops parameter
5379 instead of the global win32_ops to unpush the target.
5381 2009-01-09 Joel Brobecker <brobecker@adacore.com>
5383 * ser-mingw.c (ser_windows_open): Use proper type when casting
5384 in call to _open_osfhandle.
5386 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
5388 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
5390 2009-01-09 Joel Brobecker <brobecker@adacore.com>
5392 * CONTRIBUTE: Minor reformatting.
5394 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
5396 * MAINTAINERS: Add myself to Write After Approval.
5397 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
5400 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
5402 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
5403 Call exit to make it obvious to GCC.
5405 2009-01-08 Tom Tromey <tromey@redhat.com>
5407 PR breakpoints/9350:
5408 * varobj.c (varobj_invalidate): Unconditionally free
5410 * symfile.c (syms_from_objfile): Free local_addr when returning
5412 * exec.c (exec_file_attach): Do cleanups before returning.
5413 (exec_file_command): Likewise.
5414 * corefile.c (reopen_exec_file): Do cleanups before returning.
5415 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
5417 (do_vec_free): New function.
5418 (update_global_location_list): Make a cleanup for old_locations.
5419 Do cleanups before returning. Remove unused variable 'e'.
5420 (find_condition_and_thread): Free result of parsing the
5422 (print_it_typical): Do cleanups before returning.
5423 (breakpoint_re_set_one): Always free sals.sals.
5425 2009-01-08 Joel Brobecker <brobecker@adacore.com>
5426 Emi Suzuki <emi-suzuki@tjsys.co.jp>
5428 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
5431 2009-01-07 Doug Evans <dje@google.com>
5433 * top.c (gdb_prompt_string): Delete, unused.
5435 2009-01-07 Pedro Alves <pedro@codesourcery.com>
5437 Delete ONE_PROCESS_WRITETEXT leftovers.
5439 * breakpoint.c (insert_bp_location): Delete process_warning
5441 (insert_breakpoint_locations): Adjust.
5442 (reattach_breakpoints): Adjust.
5443 * infrun.c (normal_stop): Drop "It might be running in another
5446 2009-01-07 Stan Shebs <stan@codesourcery.com>
5448 * config/pa/linux.mh (XDEPFILES): Remove.
5450 2009-01-07 Doug Evans <dje@google.com>
5452 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
5454 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
5456 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
5457 spacing, a regression from 2008-04-22.
5459 2009-01-07 Joel Brobecker <brobecker@adacore.com>
5461 * utils.c (gdb_print_host_address): Adjust implementation to
5462 reuse host_address_to_string. Move comment explaining the conversion
5463 from host address to string from here...
5464 (host_address_to_string): ... to there.
5466 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
5468 * MAINTAINERS: Add myself for write after approval privileges.
5470 2009-01-06 Tom Tromey <tromey@redhat.com>
5472 * value.c (set_internalvar): Use value_free, not xfree.
5474 2009-01-06 Jim Blandy <jimb@red-bean.com>
5476 Check return values of functions declared with warn_unused_result
5477 attribute in GLIBC 2.8.
5478 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
5479 * inflow.c (check_syscall): New function.
5480 (new_tty): Use check_syscall to check return values from open and dup.
5481 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
5482 * main.c (captured_main): Call cwd after setting up gdb_stderr;
5483 check for errors from getcwd.
5484 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
5485 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
5486 (stdio_file_fputs): Same.
5487 * utils.c (internal_vproblem): abort if last-ditch error message
5490 * top.c (gdb_init): Don't set the current directory here; that's
5491 already been done in captured_main.
5493 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
5495 * ser-tcp.c: Adjust includes.
5496 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
5497 (tcp_auto_retry, tcp_retry_limit): Declare.
5498 (TIMEOUT): Remove, in favor of tcp_retry_limit.
5499 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
5500 (wait_for_connect): New function.
5501 (net_open): Use it. Add auto-retry logic.
5502 (set_tcp_cmd, show_tcp_cmd): New functions.
5503 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
5504 and "set/show tcp connect-timeout" commands.
5505 * NEWS: Document new commands.
5507 2009-01-05 Tom Tromey <tromey@redhat.com>
5509 * python/python-internal.h (Py_ssize_t): Define as int.
5511 2009-01-05 Jim Blandy <jimb@red-bean.com>
5513 * MAINTAINERS: Fix my e-mail address as steering committee member.
5515 2009-01-03 Joel Brobecker <brobecker@adacore.com>
5517 Updated copyright notices for most files.
5519 2009-01-03 Joel Brobecker <brobecker@adacore.com>
5521 * top.c (print_gdb_version): Update copyright year.
5523 2009-01-03 Joel Brobecker <brobecker@adacore.com>
5525 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
5527 2009-01-01 Pedro Alves <pedro@codesourcery.com>
5529 PR breakpoints/9681:
5530 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
5531 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
5532 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
5533 retrow all other exceptions.
5535 For older changes see ChangeLog-2008.
5541 version-control: never
OSDN Git Service
