1 2009-10-13 Daniel Jacobowitz <dan@codesourcery.com>
3 * arm-tdep.c (arm_push_dummy_call): Set the low bit of LR for
5 (thumb_get_next_pc): Handle Thumb-2 and ARM v6 instructions. Refuse
6 to single step into IT blocks.
8 2009-10-13 Pedro Alves <pedro@codesourcery.com>
10 * infcall.c (call_function_by_hand): Formatting.
12 2009-10-13 Tristan Gingold <gingold@adacore.com>
14 * solib-darwin.c: Add an empty line after comment for functions.
15 (struct gdb_dyld_all_image_infos): Improve comment.
16 (DYLD_VERSION): Removed and replaced by ...
17 (DYLD_VERSION_MAX, DYLD_VERSION_MIN): ... New macros.
18 (darwin_dyld_version_ok): New function.
19 (darwin_load_image_infos): Call darwin_dyld_version_ok.
20 (darwin_current_sos): Ditto.
21 (darwin_solib_create_inferior_hook): Ditto.
23 2009-10-13 Tristan Gingold <gingold@adacore.com>
25 * machoread.c: Add an empty line after comment for functions.
26 (oso_el_compare_name): New function.
27 (macho_add_oso_symfile): New function.
28 (macho_oso_symfile): Use macho_add_oso_symfile. Sort the oso
29 and optimize accesses to libraries.
31 2009-10-13 Tristan Gingold <gingold@adacore.com>
33 * objfiles.c (objfile_has_symbols): New function.
34 * objfiles.h (objfile_has_symbols): Add prototype.
35 * symfile.c (symbol_file_add_with_addrs_or_offsets): Call
37 (reread_symbols): Ditto.
39 2009-10-12 Jiang Jilin <freephp@gmail.com>
41 * i386-tdep.c (i386_process_record): Add xgetbv/xsetbv
44 2009-10-11 Pedro Alves <pedro@codesourcery.com>
46 * procfs.c (procfs_make_note_section): Go back to only outputing
47 an NT_PSTATUS note when UNIXWARE is defined.
49 2009-10-11 Daniel Jacobowitz <dan@codesourcery.com>
51 * features/xinclude.dtd: Correct EMPTY typo.
53 2009-10-10 Michael Snyder <msnyder@vmware.com>
55 * i386-tdep.c (i386_process_record): Or-equals, not not-equals.
57 2009-10-10 Pedro Alves <pedro@codesourcery.com>
59 * mi/mi-cmd-stack.c (list_args_or_locals): Use internal_error.
60 Put "break" statements on their own line.
62 2009-10-09 Pedro Alves <pedro@codesourcery.com>
64 * linux-nat.c (linux_nat_wait_1): Bail out, if TARGET_WNOHANG and
65 we found no event while waiting for a specific LWP.
66 * infrun.c (handle_inferior_event): Handle TARGET_WAITKIND_IGNORE
69 2009-10-09 Pedro Alves <pedro@codesourcery.com>
71 * procfs.c (procfs_make_note_section): Always output a NT_PSTATUS
72 note when NEW_PROC_API is defined.
74 2009-10-09 Pedro Alves <pedro@codesourcery.com>
76 * corelow.c (core_has_fake_pid): New.
77 (core_close): Clear it.
78 (add_to_thread_list): Fake a pid if one is not found on a Solaris
79 core. Add the inferior here. Always add the thread, don't use
81 (core_open): Don't add the main thread or the inferior here unless
82 we find that the core had no .reg/NN sections.
83 (get_core_register_section): Handle Solaris cores with fake pids.
85 * corelow.c (add_to_thread_list): Fix typo.
87 2009-10-08 Paul Pluzhnikov <ppluzhnikov@google.com>
90 * elfread.c (elf_symtab_read): Don't use alloca in a loop.
92 2009-10-07 Jan Kratochvil <jan.kratochvil@redhat.com>
94 * i386-nat.c (i386_stopped_by_hwbp): Remove.
96 2009-10-07 Joel Brobecker <brobecker@adacore.com>
98 * NEWS: Update following the GDB 7.0 release.
100 2009-10-07 Pierre Muller <muller@ics.u-strasbg.fr>
102 ARI fix: OP eol rule.
103 * doublest.c (floatformat_from_length): Avoid operator at end of line.
104 * dwarf2-frame.c (dwarf2_build_frame_info): Idem.
105 * dwarf2read.c (read_array_order, dwarf_decode_macros): Idem.
106 * eval.c (evaluate_subexp_standard): Idem.
107 * event-loop.c (create_timer, handle_timer_event): Idem.
108 * expprint.c (print_subexp_standard): Idem.
109 * f-exp.y (variable): Idem.
110 * f-typeprint.c (f_print_type): Idem.
112 2009-10-06 Pierre Muller <muller@ics.u-strasbg.fr>
114 ARI fix: OP eol rule.
115 * blockframe.c (find_pc_partial_function): Avoid operator at end of
117 * buildsym.c (find_symbol_in_list): Idem.
118 (start_subfile, patch_subfile_names): Idem.
119 * c-exp.y (variable, yylex): Idem.
120 * c-typeprint.c (c_print_type, c_type_print_base): Idem.
121 * c-valprint.c (c_val_print): Idem.
122 * coffread.c (patch_opaque_types, process_coff_symbol): Idem.
123 * corelow.c (core_open): Idem.
124 * cris-tdep.c (move_reg_to_mem_movem_op): Idem.
125 * cli/cli-decode.c (help_cmd_list, find_command_name_length): Idem.
127 2009-10-06 Pierre Muller <muller@ics.u-strasbg.fr>
129 ARI fix: OP eol rule.
130 * ada-exp.y (block_lookup): Avoid operator at end of line.
131 * aix-thread.c (pd_enable): Idem.
132 * alpha-tdep.c (alpha_next_pc): Idem.
133 * arm-tdep.c (arm_skip_prologue, arm_scan_prologue): Idem.
134 (condition_true, coff_sym_is_thumb): Idem.
136 2009-10-06 Joel Brobecker <brobecker@adacore.com>
140 2009-10-06 Pierre Muller <muller@ics.u-strasbg.fr>
143 * target.c (debug_to_thread_architecture): Replace %p by %s using
144 host_address_to_string function.
146 2009-10-06 Tristan Gingold <gingold@adacore.com>
148 * darwin-nat.c: Add __TEXT __info_plist content.
149 (darwin_attach_pid): Update error message.
151 2009-10-06 Joel Brobecker <brobecker@adacore.com>
153 * MAINTAINERS: Add Tristan Gingold as Maintainer of the Darwin port.
155 2009-10-06 Joel Brobecker <brobecker@adacore.com>
157 * MAINTAINERS: Add Jan Kratochvil as Maintainer of the ia64 target.
159 2009-10-05 Pedro Alves <pedro@codesourcery.com>
162 2009-10-04 Pedro Alves <pedro@codesourcery.com>
163 * gdbinit.in: Set data-directory to @srcdir@.
165 2009-10-04 Pedro Alves <pedro@codesourcery.com>
167 * NEWS: Mention non-stop mode.
169 2009-10-04 Pedro Alves <pedro@codesourcery.com>
171 * gdbinit.in: Set data-directory to @srcdir@.
173 2009-10-02 Pedro Alves <pedro@codesourcery.com>
175 * linux-nat.c (TRAP_IS_SYSCALL, TRAP_REMOVE_SYSCALL_FLAG): Delete.
176 (SYSCALL_SIGTRAP): New.
177 (status_to_str): Adjust.
178 (get_pending_status): Pending events in lp->waitstatus don't map
179 to any signal. Simplify.
180 (linux_handle_syscall_trap): New.
181 (linux_handle_extended_wait): When handling PTRACE_EVENT_CLONE
182 events, use linux_ops->to_resume instead of direct ptrace with
183 PTRACE_CONT. Remove all TRAP_IS_SYSCALL handling.
184 (wait_lwp): Handle syscall traps with linux_handle_syscall_trap,
185 and clear the sysgood bit.
186 (status_callback): Make it clearer and add comments.
187 (cancel_breakpoints_callback): Ignore if LP has waitstatus set.
188 (linux_nat_filter_event): Handle syscall traps with
189 linux_handle_syscall_trap, and clear the sysgood bit. Move the
190 check for storing siginfo to after handling extended statuses and
191 syscall traps. Store status in the lwp object.
192 (linux_wait_1): Don't swap the pending status out of the lwp
193 object until after deciding we found an lwp with an interesting
194 event. Requeue a new pending signal if we find one while getting
195 rid or a pending SIGSTOP we sent ourselves. Don't clear the
198 * infrun.c (deal_with_syscall_event): Rename to ...
199 (handle_syscall_event): ... this. Always context switch and set
200 stop_pc, even if not catching the syscall. If not catching the
201 syscall, always resume with keep_going.
202 (handle_inferior_event): Adjust.
204 2009-10-02 Jan Kratochvil <jan.kratochvil@redhat.com>
206 Fix compatibility of --with-system-readline and readline-6.0+.
207 * configure.ac <--with-system-readline> (for readline_echoing_p): New
209 * config.in: Regenerate.
210 * configure: Regenerate.
212 2009-10-01 Joel Brobecker <brobecker@adacore.com>
214 * MAINTAINERS: Move Don Lee to the correct section (Write After
217 2009-10-01 Phil Muldoon <pmuldoon@redhat.com>
219 * infcall.c (call_function_by_hand): Add a new cleanup branch for
220 std::terminate breakpoints.
222 2009-09-29 Jan Kratochvil <jan.kratochvil@redhat.com>
224 * ia64-tdep.c (ia64_convert_from_func_ptr_addr): New variable buf.
225 Check first the descriptor memory is readable.
227 2009-09-29 Tom Tromey <tromey@redhat.com>
229 * python/py-value.c (valpy_string): NULL-terminate 'keywords'.
231 2009-09-29 Ulrich Weigand <uweigand@de.ibm.com>
233 * s390-tdep.c (s390_displaced_step_fixup): Use type ULONGEST
234 instead of CORE_ADDR for "amode".
236 2009-09-29 Joel Brobecker <brobecker@adacore.com>
238 * ia64-tdep.c: Update the comments on how we insert/remove
239 breakpoints for L-X instructions.
240 (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint):
241 Update the comments inside these functions.
243 2009-09-28 Ulrich Weigand <uweigand@de.ibm.com>
245 * gdbarch.sh (displaced_step_hw_singlestep): New callback.
246 * gdbarch.c, gdbarch.h: Regenerate.
247 * arch-utils.c (default_displaced_step_hw_singlestep): New function.
248 * arch-utils.h (default_displaced_step_hw_singlestep): Add prototype.
250 * ppc-linux-tdep.c (ppc_displaced_step_hw_singlestep): New function.
251 (rs6000_gdbarch_init): Install it.
253 * infrun.c (displaced_step_fixup): Use new callback to determine
254 whether to "step" or "continue" displaced copy.
255 (resume): Likewise. Do not call maybe_software_singlestep
256 for displaced stepping.
257 (maybe_software_singlestep): Do not handle displaced stepping.
259 2009-09-28 Ulrich Weigand <uweigand@de.ibm.com>
261 * eval.c (evaluate_subexp_standard) [OP_OBJC_MSGCALL]: Support
262 platforms that use function descriptors. Prefer to use function
263 pointer types instead of function types.
264 * linespec.c (decode_objc): Support function descriptors. Fully
265 initialize SAL result.
266 * objc-lang.c (find_methods): Support function descriptors.
267 Do not require function symbol to point to text section.
269 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): When calling
270 via a function pointer, use the descriptor it points to.
272 2009-09-28 Jan Kratochvil <jan.kratochvil@redhat.com>
274 Fix ia64 breakpoints in the L-X slot.
275 * ia64-tdep.c (ia64_memory_insert_breakpoint): Extend the comment.
276 New variable shadow_slotnum, use it appropriately instead of slotnum.
277 Move shadow_len initialization before SLOTNUM adjustment, cover now the
278 whole remaining bundle. Error now on breakpoints requested for the
279 slot 2 of L-X bundles. Better sanity check the requested slot 1 of L-X
281 (ia64_memory_remove_breakpoint): New variable shadow_slotnum, use it
282 appropriately instead of slotnum. Warn now on breakpoints requested
283 for the slot 2 of L-X bundles. Better sanity check the requested slot
284 1 of L-X bundles. Update the assertio check of PLACED_SIZE.
285 (ia64_breakpoint_from_pc): New variable shadow_slotnum, use it
286 appropriately instead of slotnum. Move *lenptr initialization before
287 SLOTNUM adjustment, cover now the whole remaining bundle. Error now
288 on breakpoints requested for the slot 2 of L-X bundles. Better sanity
289 check the requested slot 1 of L-X bundles. Simplify the returned
292 2009-09-28 Joel Brobecker <brobecker@adacore.com>
294 * ia64-tdep.c (ia64_memory_insert_breakpoint): Check the slotnum
295 and the type of instruction before deciding which slot to save
296 in the breakpoint shadown contents.
298 2009-09-28 Doug Evans <dje@google.com>
300 * linux-nat.c (status_to_str): Handle TRAP_IS_SYSCALL.
301 (TRAP_REMOVE_SYSCALL_FLAG): New macro.
302 (linux_nat_wait_1): Mask off is-syscall bit in wait status for
303 TRAP_IS_SYSCALL before passing value to caller.
305 2009-09-28 Ulrich Weigand <uweigand@de.ibm.com>
307 * valops.c (value_assign): Respect parent offset when
308 assigning to a bitfield.
310 2009-09-28 Hui Zhu <teawater@gmail.com>
312 * i386-tdep.c (i386_process_record): Remove "0x" that
315 2009-09-27 Ulrich Weigand <uweigand@de.ibm.com>
317 * s390-tdep.c (op_bctr, op_bctgr, op_bct, op1_bctg, op2_bctg,
318 op_bxh, op1_bxhg, op2_bxhg, op_bxle, op1_bxleg, op2_bxleg,
319 op1_brct, op2_brct, op1_brctg, op2_brctg, op_brxh, op1_brxhg,
320 op2_brxhg, op_brxle, op1_brxlg, op2_brxlg): New enum values.
321 (is_rsi, is_rie): New insn format decoder routines.
322 (s390_displaced_step_fixup): New function.
323 (s390_gdbarch_init): Install displaced stepping routines.
325 2009-09-27 Ulrich Weigand <uweigand@de.ibm.com>
327 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*):
328 Add linux-tdep.o to gdb_target_obs.
329 (s390*-*-*): Likewise.
331 2009-09-27 Don Lee <don.lee@sunplusct.com>
333 * score-tdep.c: Comment out some simulator dependent codes.
334 * score-tdep.h: Delete some simulator dependent macro definitions.
336 2009-09-27 Hui Zhu <teawater@gmail.com>
338 * record.c (record_open): Change "query" to "error".
339 (cmd_record_stop): Change "query" to "printf_unfiltered".
341 2009-09-26 Pierre Muller <muller@ics.u-strasbg.fr>
343 * i386-nat.c (i386_stopped_data_address): Also check that
344 hitted watch register is not vacant.
346 2009-09-25 Tom Tromey <tromey@redhat.com>
349 * language.h (struct language_defn) <la_get_string>: Add
350 'char_type' argument.
351 (LA_GET_STRING): Likewise.
352 (default_get_string, c_get_string): Update.
353 * language.c (default_get_string): Add 'char_type' argument.
354 * c-valprint.c (c_textual_element_type): Rename from
355 textual_element_type. No longer static. Update callers.
356 * c-lang.h (c_textual_element_type): Declare.
357 * c-lang.c (c_get_string): Add 'char_type' argument.
359 2009-09-25 Tom Tromey <tromey@redhat.com>
361 * charset.c (iconv_open): Use UTF-16 and UTF-32, not UCS-2 and
363 (iconv): Rename 'ucs_flag'.
364 (GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
365 * c-lang.c (charset_for_string_type): Use UTF-16 and UTF-32, not
367 (convert_ucn): Use UTF-32.
369 2009-09-25 Nick Roberts <nickrob@snap.net.nz>
371 * mi/gdb-mi.el: Remove file.
373 2009-09-23 Joel Brobecker <brobecker@adacore.com>
375 * record.c (record_open, record_store_registers, record_xfer_partial):
376 Replace calls to nquery by calls to query.
378 2009-09-23 John Wright <john.wright@hp.com>
381 * event-top.c (command_line_handler): Terminate linebuffer before
384 2009-09-22 Joel Brobecker <brobecker@adacore.com>
386 * solib.c (solib_bfd_open): Relax a bit the compatibility check.
388 2009-09-22 Daniel Jacobowitz <dan@codesourcery.com>
390 * source.c (forget_cached_source_info): Clear last_source_visited.
391 (init_last_source_visited): Delete.
392 (directory_command): Do not clear last_source_visited. Call
393 forget_cached_source_info only if required.
394 (unset_substitute_path_command, set_substitute_path_command): Call
395 forget_cached_source_info.
396 * mi/mi-cmd-env.c (mi_cmd_env_dir): Do not call
397 init_last_source_visited.
398 * defs.h (init_last_source_visited): Delete declaration.
400 2009-09-22 Tom Tromey <tromey@redhat.com>
403 * python/py-value.c (valpy_int): Use PyLong_FromLongLong.
404 (valpy_long): Likewise.
406 2009-09-22 Tom Tromey <tromey@redhat.com>
409 * eval.c (evaluate_subexp_standard) <do_call_it>: Handle internal
410 functions in EVAL_AVOID_SIDE_EFFECTS case.
412 2009-09-22 Jie Zhang <jie.zhang@analog.com>
414 * MAINTAINERS: Add myself under Write After Approval.
416 2009-09-22 Pierre Muller <muller@ics.u-strasbg.fr>
418 * windows-nat.c (ctrl_c_handler): Also handle CTRL_BREAK_EVENT.
420 2009-09-18 Keith Seitz <keiths@redhat.com>
422 * cp-support.h (cp_validate_operator): Declare new function.
423 * cp-support.c (cp_validate_operator): New function.
424 * linespec.c (decode_compound): For C++ check for a valid operator.
426 2009-09-21 Keith Seitz <keiths@redhat.com>
428 * c-exp.y (qualified_name): Call CHECK_TYPEDEF before deciding
429 that a type is not an aggregate type.
431 2009-09-21 Jason Orendorff <jason.orendorff@gmail.com>
434 * python/py-function.c (fnpy_init): Use xstrdup.
436 2009-09-21 Jie Zhang <jie.zhang@analog.com>
438 * doc/gdb.texinfo: Escape "{" and "}".
440 2009-09-21 Phil Muldoon <pmuldoon@redhat.com>
444 * c-lang.c (c_printstr): Do not loop past options->print_max when
445 iterating with wchar_iterate.
447 2009-09-21 Phil Muldoon <pmuldoon@redhat.com>
449 * python/py-value.c (valpy_getitem): Test value before allowing
452 2009-09-21 Hui Zhu <teawater@gmail.com>
453 Michael Snyder <msnyder@vmware.com>
455 * amd64-linux-tdep.c (amd64_all_but_ip_registers_record): New
457 (amd64_linux_syscall_record): Call
458 amd64_all_but_ip_registers_record if syscall is
460 (AMD64_LINUX_redzone, AMD64_LINUX_xstate,
461 AMD64_LINUX_frame_size): New macros.
462 (amd64_linux_record_signal): New function.
463 (amd64_linux_init_abi): Call set_gdbarch_process_record_signal.
465 2009-09-21 Hui Zhu <teawater@gmail.com>
466 Michael Snyder <msnyder@vmware.com>
468 * i386-linux-tdep.c (i386_all_but_ip_registers_record): New
470 (i386_linux_intx80_sysenter_record): Call
471 i386_all_but_ip_registers_record if syscall is sys_sigreturn
473 (I386_LINUX_xstate, I386_LINUX_frame_size): New macros.
474 (i386_linux_record_signal): New function.
475 (i386_linux_init_abi): Call set_gdbarch_process_record_signal.
477 2009-09-21 Hui Zhu <teawater@gmail.com>
478 Michael Snyder <msnyder@vmware.com>
480 * record.c (record_end_entry): New struct.
481 (record_type): Add end.
482 (record_arch_list_add_end): Set rec->u.end.sigval to
484 (record_message_args): New struct.
485 (record_message): Call gdbarch_process_record_signal.
486 (do_record_message): Add argument "signal".
487 (record_resume): Ditto.
488 (record_wait): Ditto. Check record_list->u.end.sigval
491 2009-09-21 Hui Zhu <teawater@gmail.com>
492 Michael Snyder <msnyder@vmware.com>
494 * gdbarch.sh (process_record_signal): New interface.
496 2009-09-19 Matt Rice <ratmice@gmail.com> (tiny change)
498 Checked in by Joel Brobecker <brobecker@gnat.com>
499 * varobj.c (varobj_update): Initialize children_changed.
501 2009-09-19 Vladimir Prus <vladimir@codesourcery.com>
503 * mi/mi-cmd-stack.c (list_args_or_locals): Workaround
506 2009-09-19 Vladimir Prus <vladimir@codesourcery.com>
508 * mi/mi-cmds.h (mi_cmd_stack_list_variables): Declare.
509 * mi/mi-cmds.c (mi_cmds): Register -stack-list-variables.
510 * mi/mi-cmd-stack.c (enum what_to_list): New.
511 (list_args_or_locals): Accept what_to_list parameter.
512 Use 'variables' as output name of all are requested.
513 (mi_cmd_stack_list_variables): New.
514 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Adjust.
516 2009-09-19 Eli Zaretskii <eliz@gnu.org>
518 * config/djgpp/fnchange.lst: Add missing edits.
520 2009-09-18 Maxim Grigoriev <maxim2405@gmail.com>
522 * xtensa-tdep.c (call0_analyze_prologue): Replace INT_MAX by UNIT_MAX.
524 2009-09-18 Jan Kratochvil <jan.kratochvil@redhat.com>
526 * objfiles.c (free_objfile): Clear SYMFILE_OBJFILE if it is OBJFILE.
527 * rs6000-nat.c (vmap_ldinfo): Only assertion check SYMFILE_OBJFILE now.
528 * symfile.c (syms_from_objfile, symbol_file_clear): Likewise.
530 2009-09-18 Ulrich Weigand <uweigand@de.ibm.com>
532 * rs6000-tdep.c (rs6000_builtin_type_vec128): Add v2_double
535 2009-09-17 Joel Brobecker <brobecker@adacore.com>
537 Fix a build failure on pa-hpux:
538 * gdb_ptrace.h (PT_SYSCALL): Define here if not already defined.
539 * inf-ttrace.c (inf_ttrace_wait): Fix compilation failure
540 introduced after field syscall_id inside struct target_waitstatus
541 has been renamed into syscall_number.
543 2009-09-16 H.J. Lu <hongjiu.lu@intel.com>
546 * Makefile.in (GDB_DATADIR_PATH): Renamed to ...
548 (xml-syscall-install): Updated.
550 2009-09-16 Joel Brobecker <brobecker@adacore.com>
552 GDB 7.0 branch created (branch timestamp: 2009-09-16 19:00 UTC)
553 * version.in: Bump version to 7.0.50.20090916-cvs.
555 2009-09-15 Tom Tromey <tromey@redhat.com>
557 * varobj.h (varobj_update_result_t) <new>: New field.
558 (varobj_get_child_range, varobj_set_child_range): Declare.
559 (varobj_list_children): Update.
560 (varobj_enable_pretty_printing, varobj_has_more)
561 (varobj_pretty_printed_p): Declare.
562 * varobj.c (pretty_printing): New global.
563 (varobj_enable_pretty_printing): New function.
564 (struct varobj_root) <from, to, constructor, child_iter,
565 saved_item>: New fields.
566 (varobj_create): Don't call install_default_visualizer.
567 (instantiate_pretty_printer): Don't use value_copy.
568 (varobj_has_more): New function.
569 (restrict_range): New function.
570 (install_dynamic_child): Likewise.
571 (dynamic_varobj_has_child_method): Likewise.
572 (update_dynamic_varobj_children): Remove 'new_and_unchanged'
573 argument; add 'new', 'unchanged', 'from', and 'to' arguments.
575 (varobj_get_num_children): Call update_dynamic_varobj_children.
576 (varobj_list_children): Add 'from' and 'to' arguments. Ignore
577 result of update_dynamic_varobj_children. Don't call
578 install_default_visualizer. Restrict result range.
579 (varobj_add_child): Don't call install_default_visualizer.
580 (varobj_pretty_printed_p): New function.
581 (install_visualizer): Rewrite. Move earlier in file.
582 (install_default_visualizer): Likewise.
583 (construct_visualizer): New function.
584 (install_new_value_visualizer): Likewise.
585 (install_new_value): Don't call release_value. Special case
586 pretty-printed objects. Use value_incref. Rearrange "changed"
588 (varobj_get_child_range): New function.
589 (varobj_set_child_range): Likewise.
590 (varobj_set_visualizer): Rewrite.
591 (varobj_update): Rewrite pretty-printing logic.
592 (new_variable): Initialize new fields.
593 (free_variable): Destroy new fields.
594 (value_of_root): Copy 'from' and 'to'.
595 (my_value_of_variable): Handle pretty-printers.
596 (value_get_print_value): Rework pretty-printing logic.
597 (cplus_describe_child): Don't use release_value.
598 * mi/mi-cmds.h (mi_cmd_enable_pretty_printing)
599 (mi_cmd_var_set_update_range): Declare.
600 * mi/mi-cmds.c (mi_cmds): Add enable-pretty-printing and
601 var-set-update-range.
602 * mi/mi-cmd-var.c (print_varobj): Update. Emit "dynamic"
604 (mi_cmd_var_create): Emit "has_more" attribute.
605 (mi_cmd_var_set_format): Plug memory leak.
606 (mi_print_value_p): Replace 'type' argument with 'var'. Handle
607 pretty-printed varobjs.
608 (mi_cmd_var_list_children): Accept 'from' and 'to' arguments.
609 Emit "has_more" attribute.
610 (mi_cmd_var_evaluate_expression): Plug memory leak.
611 (mi_cmd_var_assign): Likewise.
612 (varobj_update_one): Likewise. Emit "dynamic", "has_more", and
613 "new_children" attributes.
614 (mi_cmd_enable_pretty_printing): New function.
615 (mi_cmd_var_set_update_range): Likewise.
617 2009-09-15 Doug Evans <dje@google.com>
619 * dwarf2expr.h (dwarf_value_location): Add more comments describing
621 (struct dwarf_stack_value): New struct.
622 (struct dwarf_expr_context): Change type of `stack' from CORE_ADDR*
623 to struct dwarf_stack_value*.
624 (struct dwarf_expr_piece): Move `v.value' into its own struct, v.expr,
625 all uses updated. Add v.expr.in_stack_memory.
626 (dwarf_expr_push): Update declaration.
627 (dwarf_expr_fetch_in_stack_memory): Declare.
628 * dwarf2expr.c (dwarf_expr_grow_stack): Update calculation of
630 (dwarf_expr_push): New arg in_stack_memory, all callers updated.
631 (dwarf_expr_fetch_in_stack_memory): New function.
632 (add_piece): Set in_stack_memory for non-literal values.
633 (execute_stack_op): Allow ops to specify whether the value is on the
635 (execute_stack_op, case DW_OP_fbreg): Mark value as in stack memory.
636 (execute_stack_op, case DW_OP_call_frame_cfa): Ditto.
637 (execute_stack_op, case DW_OP_dup): Copy in_stack_memory flag.
638 (execute_stack_op, cases DW_OP_pick, DW_OP_over): Ditto.
639 (execute_stack_op, cases DW_OP_swap, DW_OP_rot): Update type of
641 * dwarf2loc.c (read_pieced_value): Call read_stack for values known
642 to be on the program's stack.
643 (dwarf2_evaluate_loc_desc, case DWARF_VALUE_MEMORY): Call
644 set_value_stack only for objects known to be in stack memory.
645 * dwarf2-frame.c (execute_stack_op): New arg initial_in_stack_memory,
648 * target.c (memory_xfer_partial): Pass correct length to dcache_update.
650 2009-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
652 Fix gcc-4.5 HEAD warnings for enum ada_operator.
653 * Makefile.in (HFILES_NO_SRCDIR): Add ada-operator.inc.
654 * ada-lang.h (enum ada_operator): Move it to ...
655 * ada-operator.inc: ... a new file.
656 * expression.h (enum exp_opcode): Include ada-operator.inc.
657 New element OP_UNUSED_LAST. Update comment for OP_EXTENDED0.
659 Fix gcc-4.5 HEAD warnings for GDB_FORM_cached_string.
660 * dwarf2read.c (GDB_FORM_cached_string)
661 (dwarf_form_name <GDB_FORM_cached_string>): Remove.
662 (struct attribute <dwarf_form>): Reduce the bit width.
663 (struct attribute <string_is_canonical>, DW_STRING_IS_CANONICAL): New.
664 (read_attribute_value <DW_FORM_string>)
665 (read_attribute_value <DW_FORM_strp>): Initialize
666 DW_STRING_IS_CANONICAL.
667 (dwarf2_name, dump_die_shallow <DW_FORM_string>)
668 (dump_die_shallow <DW_FORM_strp>): Update the code using former
669 GDB_FORM_cached_string.
671 2009-09-14 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
673 * amd64-linux-tdep.c: Include xml-syscall.h header, define the XML
674 syscall name for the architecture.
675 (amd64_linux_get_syscall_number): New function.
676 (amd64_linux_init_abi): Register the correct functions for syscall
677 catchpoint; set the correct syscall file name.
678 * breakpoint.c: New include: xml-syscall.h.
679 (set_raw_breakpoint_without_location): Setting the parameters
680 for the catch syscall feature.
681 (insert_catch_syscall): New.
682 (remove_catch_syscall): New.
683 (breakpoint_hit_catch_syscall): New.
684 (print_it_catch_syscall): New.
685 (print_one_catch_syscall): New.
686 (print_mention_catch_syscall): New.
687 (catch_syscall_breakpoint_ops): New.
688 (syscall_catchpoint_p): New.
689 (create_catchpoint_without_mention): New.
690 (create_catchpoint): Modified in order to use
691 create_catchpoint_without_mention.
692 (create_syscall_event_catchpoint): New.
693 (clean_up_filters): New.
694 (catch_syscall_split_args): New.
695 (catch_syscall_command_1): New.
696 (delete_breakpoint): Add cleanup for catch syscall.
697 (is_syscall_catchpoint_enabled): New.
698 (catch_syscall_enabled): New.
699 (catching_syscall_number): New.
700 (catch_syscall_completer): New completer function.
701 (add_catch_command): Add the completer function for catchpoints.
702 * breakpoint.h (syscalls_to_be_caught): New vector.
703 (catch_syscall_enabled): New.
704 (catching_syscall_number): New.
705 * gdbarch.c: Regenerated.
706 * gdbarch.h: Regenerated.
707 * gdbarch.sh: Add syscall catchpoint functions and structures.
708 (get_syscall_number): New.
709 (UNKNOWN_SYSCALL): New definition.
710 * i386-linux-nat.c (i386_linux_resume): Select the proper request
711 to be made for ptrace() considering if we are catching syscalls
713 * i386-linux-tdep.c: Include xml-syscall.h header, define the XML
714 syscall name for the architecture.
715 (i386_linux_get_syscall_number): New.
716 (i386_linux_init_abi): Register the correct functions for syscall
717 catchpoint; set the correct syscall file name.
718 * inf-child.c (inf_child_set_syscall_catchpoint): New.
719 (inf_child_target): Assign default values to target_ops.
720 * inf-ptrace.c (inf_ptrace_resume): Select the proper request
721 to be made for ptrace() considering if we are catching syscalls
723 * inferior.h (struct inferior): Included new variables
724 any_syscall_count, syscalls_counts and total_syscalls_count,
725 used to keep track of requested syscall catchpoints.
726 * infrun.c (resume): Add syscall catchpoint.
727 (deal_with_syscall_event): New.
728 (handle_inferior_event): Add syscall entry/return events.
729 (inferior_has_called_syscall): New.
730 * linux-nat.c: Define some helpful variables to track wether we have
731 support for the needed ptrace option.
732 (linux_test_for_tracesysgood): New.
733 (linux_supports_tracesysgood): New.
734 (linux_enable_tracesysgood): New.
735 (linux_enable_event_reporting): Save the current used ptrace
737 (linux_child_post_attach): Calling linux_enable_tracesysgood.
738 (linux_child_post_startup_inferior): Likewise.
739 (linux_child_set_syscall_catchpoint): New function.
740 (linux_handle_extended_wait): Handle the case which the inferior stops
741 because it has called or returned from a syscall.
742 (linux_target_install_ops): Install the necessary functions to handle
744 * linux-nat.h (struct lwp_info): Include syscall_state into the
745 structure, which indicates if we are in a syscall entry or return.
746 * ppc-linux-tdep.c: Include xml-syscall.h header, define the XML
747 syscall filename for the arch.
748 (ppc_linux_get_syscall_number): New.
749 (ppc_linux_init_abi): Register the correct functions for syscall
750 catchpoint; setting the correct name for the XML syscall file.
751 * target.c (update_current_target): Update/copy functions related to
753 (target_waitstatus_to_string): Add syscall catchpoint entry/return
755 * target.h (struct target_waitstatus): Add syscall number.
756 (struct syscall): New struct to hold information about syscalls
758 (struct target_ops): Add ops for syscall catchpoint.
759 (inferior_has_called_syscall): New.
760 (target_set_syscall_catchpoint): New.
761 * xml-support.c (xml_fetch_content_from_file): New function,
762 transferred from xml-tdesc.c.
763 * xml-support.h (xml_fetch_content_from_file): New.
764 * xml-tdesc.c (fetch_xml_from_file): Function removed;
765 transferred to xml-support.c.
766 (file_read_description_xml): Updated to use the new
767 xml_fetch_content_from_file function.
768 * syscalls/gdb-syscalls.dtd: New definition file for syscall's XML
770 * syscalls/amd64-linux.xml: New file containing information about
771 syscalls for GNU/Linux systems that use amd64 architecture.
772 * syscalls/i386-linux.xml: New file containing information about
773 syscalls for GNU/Linux systems that use i386 architecture.
774 * syscalls/ppc-linux.xml: New file containing information about
775 syscalls for GNU/Linux systems that use PPC architecture.
776 * syscalls/ppc64-linux.xml: New file containing information about
777 syscalls for GNU/Linux systems that use PPC64 architecture.
778 * xml-syscall.c: New file containing functions for manipulating
780 * xml-syscall.h: New file, exporting the functions above mentioned.
781 * Makefile.in: Support for relocatable GDB datadir and XML
783 * NEWS: Added information about the catch syscall feature.
785 2009-09-14 Doug Evans <dje@google.com>
787 * target.c (memory_xfer_partial): Only update dcache after we know
790 2009-09-14 Paul Pluzhnikov <ppluzhnikov@google.com>
792 *minsyms.c (lookup_minimal_symbol_by_pc_section_1): Assert non-NULL
794 (lookup_minimal_symbol_by_pc_section): Check for NULL section.
795 (lookup_minimal_symbol_by_pc): Adjust.
797 2009-09-14 Paul Pluzhnikov <ppluzhnikov@google.com>
799 * objfiles.c (qsort_cmp): Remove asserts.
800 (insert_section_p, filter_debuginfo_sections): New function.
801 (filter_overlapping_sections): Likewise.
802 (update_section_map): Adjust.
804 2009-09-13 Daniel Jacobowitz <dan@codesourcery.com>
806 * frame.c (get_frame_id): Default to outer_frame_id if the this_id
807 method does not supply an ID. Assert that the result is not
809 (outer_frame_id): New.
810 (frame_id_p): Accept outer_frame_id.
811 (frame_id_eq): Allow outer_frame_id to be equal to itself.
812 (frame_find_by_id): Revert previous local workarounds.
813 (get_prev_frame_1): Adjust end-of-stack check to test outer_frame_id.
814 * frame.h (null_frame_id, frame_id_p): Update comments.
815 (outer_frame_id): Declare.
816 * infrun.c (handle_inferior_event): Do not treat all steps from the
817 outermost frame as subroutine calls.
819 * libunwind-frame.c (libunwind_frame_this_id): Do not clear THIS_ID.
820 * hppa-tdep.c (hppa_stub_frame_this_id): Likewise.
821 * ia64-tdep.c (ia64_frame_this_id): Likewise.
822 (ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id):
823 Use outer_frame_id instead of null_frame_id.
824 * amd64obsd-tdep.c (amd64obsd_trapframe_cache): Use outer_frame_id.
825 * i386obsd-tdep.c (i386obsd_trapframe_cache): Likewise.
826 * inline-frame.c (inline_frame_this_id): Refuse outer_frame_id.
827 * thread.c (restore_selected_frame): Update comment and remove
830 2009-09-11 Doug Evans <dje@google.com>
832 * dwarf2expr.c (execute_stack_op, case DW_OP_piece): Delete unused
833 local addr_or_regnum.
835 * objfiles.c (struct objfile_data): Delete member cleanup and replace
837 (register_objfile_data_with_cleanup): Delete arg cleanup and replace
838 with save, free. All callers updated.
839 (clear_objfile_data): Replace cleanup loop with separate save and
841 * objfiles.h (register_objfile_data_with_cleanup): Update.
842 * arm-tdep.c (arm_objfile_data_free): Renamed from
843 arm_objfile_data_cleanup, all callers updated.
844 * dwarf2read.c (dwarf2_per_objfile_free): Renamed from
845 dwarf2_per_objfile_cleanup, all callers updated.
846 * python/py-objfile.c (py_free_objfile): Renamed from clean_up_objfile,
848 * python/py-type.c (save_objfile_types): Renamed from
849 clean_up_objfile_types, all callers updated.
851 2009-09-11 Tom Tromey <tromey@redhat.com>
853 * dwarf2loc.c (struct piece_closure) <arch>: New field.
854 (dwarf2_evaluate_loc_desc): Update.
855 (dwarf2_loc_desc_needs_frame): Likewise.
856 (allocate_piece_closure): Initialize new field.
857 (read_pieced_value): Update.
858 (write_pieced_value): Update.
859 (copy_pieced_value_closure): Update.
860 * dwarf2expr.h (enum dwarf_value_location): New.
861 (struct dwarf_expr_context) <in_reg>: Remove.
862 <location, len, data>: New fields.
863 (struct dwarf_expr_piece) <in_reg, value>: Remove.
864 <location, v>: New fields.
865 * dwarf2expr.c (add_piece): Remove in_reg, value arguments.
867 (require_composition): New function.
868 (execute_stack_op): Update.
869 <DW_OP_implicit_value, DW_OP_stack_value>: New cases.
870 <DW_OP_reg0>: Set location, not in_reg.
871 <DW_OP_regx>: Likewise. Use require_composition.
872 <DW_OP_fbreg>: Update.
873 <DW_OP_piece>: Likewise.
874 * dwarf2-frame.c (execute_stack_op): Update.
876 2009-09-10 Anthony Green <green@moxielogic.com>
878 * moxie-tdep.c (moxie_analyze_prologue): Recognize new prologue
881 2009-09-10 Michael Snyder <msnyder@vmware.com>
883 * remote.c (PACKET_bc, PACKET_bs): New enums.
884 (remote_protocol_features): Add ReverseStep, ReverseContinue.
885 (remote_resume): Check for reverse capability.
886 (_initialize_remote): Add packet config for "bs" and "bc" packets.
887 * NEWS (new options): Mention set/show for "bs" and "bc" packets.
889 2009-09-10 Joel Brobecker <brobecker@adacore.com>
891 * top.c (interactive_mode): New static variable.
892 (show_interactive_mode): New function.
893 (input_from_terminal_p): If interactive_mode is not auto, then
894 use that rather than checking the stdin settings.
895 (init_main): Add "set/show interactive-mode" command.
896 * NEWS: Add entry for new "set/show interactive-mode" command.
898 2009-09-10 Joel Brobecker <brobecker@adacore.com>
900 * configure.ac: Fix the names of the python source and object files
901 following the renaming done in an earlier change.
902 * configure: Regenerate.
904 2009-09-08 Joel Brobecker <brobecker@adacore.com>
906 Fix a build failure on AIX.
907 * rs6000-nat.c (vmap_exec): Rewrite using target_get_section_table
908 instead of relying on the to_sections/to_section_end target_ops
909 field, since the latter have been removed in a previous patch.
911 2009-09-08 Thiago Jung Bauermann <thiago.bauermann@gmail.com>
913 * Makefile.in (py-cmd.o): Renamed from python-cmd.o. Updated
915 (py-frame.o): Renamed from python-frame.o. Updated references.
916 (py-function.o): Renamed from python-function.o. Updated references.
917 (py-objfile.o): Renamed from python-objfile.o. Updated references.
918 (py-prettyprint.o): Renamed from python-prettyprint.o. Updated
920 (py-type.o): Renamed from python-type.o. Updated references.
921 (py-utils.o): Renamed from python-utils.o. Updated references.
922 (py-value.o): Renamed from python-value.o. Updated references.
923 * py-cmd.c: Renamed from python-cmd.c.
924 * py-frame.c: Renamed from python-frame.c.
925 * py-function.c: Renamed from python-function.c.
926 * py-objfile.c: Renamed from python-objfile.c.
927 * py-prettyprint.c: Renamed from python-prettyprint.c.
928 * py-type.c: Renamed from python-type.c.
929 * py-utils.c: Renamed from python-utils.c.
930 * py-value.c: Renamed from python-value.c.
932 2009-09-08 Joel Brobecker <brobecker@adacore.com>
934 Avoid quadratic behavior when computing the value of a register.
935 * frame.c (frame_stash): New static constant.
936 (frame_stash_add, frame_stash_find, frame_stash_invalidate):
938 (get_frame_id): Minor reformatting. Add the frame to the frame stash.
939 (frame_find_by_id): Search the frame stash first before walking all
940 frames starting from te current_frame.
941 (reinit_frame_stash): Add call to frame_stash_invalidate ();
943 2009-09-08 Joel Brobecker <brobecker@adacore.com>
945 * block.c (contained_in): Return zero for nested functions.
946 * blockframe.c (block_innermost_frame): Delete unreferenced local
949 2009-09-08 Doug Evans <dje@google.com>
951 * target.c (initialize_targets): Fix thinko in stack_cache_enabled_p.
953 2009-09-08 Michael Snyder <msnyder@vmware.com>
955 * amd64-linux-tdep.h (enum amd64_syscall): New enum consts,
956 to replace literal consts used in amd64-linux-tdep.c
957 * linux-record.h (enum gdb_syscall): New enum consts, to replace
958 literal consts used in amd64-linux-tdep.c and linux-record.c.
959 * amd64-linux-tdep.c (amd64_canonicalize_syscall): New function,
960 translate from native amd64 Linux syscall id to internal gdb id.
961 (amd64_linux_syscall_record): Switch statement abstracted out
962 and replaced with a call to amd64_canonicalize_syscall.
963 * linux-record.c (record_linux_system_call): Replace literal
964 consts with enum consts.
965 * i386-linux-tdep.c (i386_canonicalize_syscall): New function,
966 trivially translate from native i386 Linux syscalls to gdb syscalls.
967 (i386_linux_intx80_sysenter_record):
969 2009-09-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
971 * gdb/Makefile.in (check//%): Parse 'config.status --version'
972 output to recreate the configuration from the testsuite directory,
973 rather than running 'config.status --recheck' from a different
974 build directory. Let configure do the recursion rather than
977 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
979 * ia64-tdep.c (ia64_memory_remove_breakpoint): Call do_cleanups
982 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
984 * ia64-tdep.c (ia64_memory_insert_breakpoint)
985 (ia64_memory_remove_breakpoint): Return immediately if any of memory
986 reads fail. Do not combine the VAL values.
988 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
990 Fix ia64 shadowing of breakpoints in multiple slots of a single bundle.
991 * ia64-tdep.c (ia64_memory_insert_breakpoint): New call
992 of make_show_memory_breakpoints_cleanup with parameter 0. Move the
993 reading of SHADOW_CONTENTS to this memory state point of code. Update
994 comment for the memory re-read.
996 2009-09-07 Michael Snyder <msnyder@vmware.com>
998 * record.c: Minor comment and white space fix-ups.
1000 2009-09-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1002 * m68k-tdep.c (m68k_gdbarch_init): Allocate TDEP as cleared.
1003 * sparc-tdep.c (sparc32_gdbarch_init): Allocate TDEP as cleared.
1004 Remove explicit clearing of TDEP fields.
1006 2009-09-06 Hui Zhu <teawater@gmail.com>
1008 * i386-tdep.c (i386_record_check_override): Deleted.
1009 (i386_record_lea_modrm): Ditto.
1010 (i386_process_record): Ditto.
1012 2009-09-05 Eli Zaretskii <eliz@gnu.org>
1014 * config/djgpp/djconfig.sh: Fix for Autoconf 2.64.
1015 * config/djgpp/config.sed: Fix for Autoconf 2.64.
1017 2009-09-05 Hui Zhu <teawater@gmail.com>
1019 * i386-tdep.c (i386_record_s): Add orig_addr.
1020 (i386_record_check_override): New function.
1021 (i386_record_lea_modrm): Call i386_record_check_override.
1022 (i386_process_record): Ditto.
1024 2009-09-03 Nathan Froyd <froydnj@codesourcery.com>
1026 * dwarf2loc.c (struct piece_closure): New.
1027 (allocate_piece_closure): New function.
1028 (read_pieced_value): New function.
1029 (write_pieced_value): New function.
1030 (copy_pieced_value_closure): New function.
1031 (free_pieced_value_closure): New function.
1032 (pieced_value_funcs): Define.
1033 (dwarf2_evaluate_loc_desc): Return a computed value for a variable
1034 described with pieces.
1036 2009-09-03 Pierre Muller <muller@ics.u-strasbg.fr>
1037 Richard Earnshaw <rearnsha@arm.com>
1039 * arm-tdep.c (displaced_write_reg): Replace call to abort by call
1042 2009-09-02 Tom Tromey <tromey@redhat.com>
1044 * frame.h (frame_unwinder_is): Declare.
1045 * frame.c (frame_unwinder_is): New function.
1046 * dwarf2loc.c: Include dwarf2-frame.h.
1047 (dwarf_expr_frame_cfa): New function.
1048 (dwarf2_evaluate_loc_desc): Use it.
1049 (needs_frame_frame_cfa): New function.
1050 (dwarf2_loc_desc_needs_frame): Use it.
1051 * dwarf2expr.h (struct dwarf_expr_context) <get_frame_cfa>: New
1053 * dwarf2expr.c (execute_stack_op) <DW_OP_call_frame_cfa>: New
1055 * dwarf2-frame.h (dwarf2_frame_cfa): Declare.
1056 * dwarf2-frame.c (no_get_frame_cfa): New function.
1057 (execute_stack_op): Use it.
1058 (dwarf2_frame_cfa): New function.
1060 2009-09-02 Hui Zhu <teawater@gmail.com>
1062 * record.c (record_resume): Change "signal" to "siggnal".
1064 2009-09-01 Hui Zhu <teawater@gmail.com>
1066 * record.c (record_resume): Change "siggnal" to "signal".
1068 2009-09-01 Hui Zhu <teawater@gmail.com>
1070 * record.c (record_resume_siggnal): Deleted.
1071 (record_resume): Ditto.
1072 (record_wait): Change record_resume_siggnal to
1075 2009-08-31 Jacob Potter <jdpotter@google.com>
1076 Doug Evans <dje@google.com>
1078 Implement TARGET_OBJECT_STACK_MEMORY.
1079 * NEWS: Add note on new "set stack-cache" option.
1080 * corefile.c (read_stack): New function.
1081 * dcache.c (dcache_struct): New member ptid.
1082 (dcache_enable_p): Mark as obsolete.
1083 (show_dcache_enabled_p): Flag option as deprecated.
1084 (dcache_invalidate): Update ptid.
1085 (dcache_invalidate_line): New function.
1086 (dcache_read_line): No longer check cacheable attribute, stack
1087 accesses get cached despite attribute.
1088 (dcache_init): Set ptid.
1089 (dcache_xfer_memory): Flush cache if from different ptid than before.
1090 Update cache after write.
1091 (dcache_update): New function.
1092 (dcache_info): Report ptid.
1093 (_initialize_dcache): Update text for `remotecache' to indicate it
1095 * dcache.h (dcache_update): Declare.
1096 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with
1098 * frame-unwind.c (frame_unwind_got_memory): Ditto.
1099 * gdbcore.h (read_stack): Declare.
1100 * memattr.c (mem_enable_command): Call target_dcache_invalidate
1101 instead of dcache_invalidate.
1102 (mem_disable_command, mem_delete_command): Ditto.
1103 * target.c (stack_cache_enabled_p_1): New static global.
1104 (stack_cache_enabled_p): New static global.
1105 (set_stack_cache_enabled_p): New function.
1106 (show_stack_cache_enabled_p): New function.
1107 (target_dcache): Make static.
1108 (target_dcache_invalidate): New function.
1109 (target_load, target_resume): Call target_dcache_invalidate
1110 instead of dcache_invalidate.
1111 (memory_xfer_partial): New arg object, all callers updated.
1112 Check for existing inferior before calling dcache routines.
1113 When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache.
1114 (target_xfer_partial): Call memory_xfer_partial for
1115 TARGET_OBJECT_STACK_MEMORY.
1116 (target_read_stack): New function.
1117 (initialize_targets): Install new option `stack-cache'.
1118 * target.h: Remove #include of dcache.h.
1119 (enum target_object): New value TARGET_OBJECT_STACK_MEMORY.
1120 (target_dcache): Delete.
1121 (target_dcache_invalidate): Declare.
1122 (target_read_stack): Declare.
1123 * top.c (prepare_execute_command): New function.
1124 (execute_command): Call prepare_execute_command
1125 instead of free_all_values.
1126 * top.h (prepare_execute_command): Declare.
1127 * valops.c (get_value_at): New function.
1128 (value_at): Guts moved to get_value_at.
1129 (value_at_lazy): Similarly.
1130 (value_fetch_lazy): Call read_stack for stack values.
1131 * value.c (struct value): New member `stack'.
1132 (value_stack, set_value_stack): New functions.
1133 * value.h (value_stack, set_value_stack): Declare.
1134 * mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command
1135 instead of free_all_values.
1137 2009-08-29 Hui Zhu <teawater@gmail.com>
1139 * i386-tdep.c (i386_process_record): Fix the error of string
1140 ops instructions's handler.
1142 2009-08-28 Doug Evans <dje@google.com>
1144 * top.c (execute_command): Remove redundant comment.
1146 2009-08-28 Daniel Jacobowitz <dan@codesourcery.com>
1150 * value.c (value_primitive_field): Do not save value_offset for
1152 (unpack_bits_as_long): Do not read an entire ULONGEST.
1154 2009-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1156 Support constant DW_AT_data_member_location by GCC PR debug/40659.
1158 (dwarf2_add_field <DW_TAG_member> <DW_AT_data_member_location>):
1159 Initialize BYTE_OFFSET to 0 by default. Explicitly check if
1161 (dwarf2_add_field <DW_TAG_inheritance> <DW_AT_data_member_location>)
1162 (read_common_block <DW_AT_data_member_location>): New variable
1163 byte_offset. Fix crash on non-DW_BLOCK ATTR values.
1165 2009-08-28 Hui Zhu <teawater@gmail.com>
1167 * record.c (record_list_release_next): Change the first
1168 record_reg to record_end.
1170 2009-08-27 Doug Evans <dje@google.com>
1172 * value.c (free_all_values): Tweak comment.
1174 * NEWS: Add note on "info sharedlibrary".
1175 Remove note on "set print symbol-loading".
1176 * main.c (captured_main): Pass !batch for from_tty when calling
1177 symbol_file_add_main.
1178 * objfiles.h (objfile_has_partial_symbols): Declare.
1179 (objfile_has_full_symbols): Declare.
1180 * objfiles.c (objfile_has_partial_symbols): New function.
1181 (have_partial_symbols): Use it.
1182 (objfile_has_full_symbols): New function.
1183 (have_full_symbols): Use it.
1184 * solib.c: Include interps.h.
1185 (solib_read_symbols): Back out patch of 2008-07-10.
1186 Add test for info_verbose for symbol loading messages for
1187 consistency with symfile.c.
1188 (info_sharedlibrary_command): Handle optional parameter of regex of
1189 libraries to list. Inform user of libraries without debugging info.
1190 Rewrite to use ui_out routines to format output.
1191 * symfile.c (print_symbol_loading): Delete.
1192 (symbol_file_add_with_addrs_or_offsets): Back out patch of 2008-07-10.
1193 Print "no debugging symbols found" only if from_tty || info_verbose;
1194 and only check file being loaded, not all files.
1195 (reread_symbols): Test file being loaded for whether it has symbols,
1197 (__initialize_symfile): Delete `set print symbol-loading'.
1198 * symfile.h (print_symbol_loading): Delete.
1200 2009-08-27 Jan Kratochvil <jan.kratochvil@redhat.com>
1202 * varobj.c (varobj_create): Error if the specified frame was not found
1205 2009-08-26 Michael Snyder <msnyder@vmware.com>
1207 * i386-tdep.c (i386_process_record): Break out of prefix loop
1208 if not amd64. Otherwise inc/dec instructions are lost.
1210 2009-08-25 Keith Seitz <keiths@redhat.com>
1212 * c-exp.y (yylex): Add cxx_only check for tokentab2 and tokentab3
1214 (tokentab3): Add cxx_only for DOT_STAR.
1216 2009-08-25 Pedro Alves <pedro@codesourcery.com>
1218 * inferior.c (print_inferior): Align columns left. Remove header
1219 for the the "current" column. Rename column "Id" to "Num".
1220 Rename column "PID" to "Description". Print if there's no selected
1223 2009-08-25 Jan Kratochvil <jan.kratochvil@redhat.com>
1225 Fix ia64 start crash when GDB built with -lmcheck.
1226 * ia64-tdep.c (ia64_gdbarch_init): Allocate TDEP as cleared. Remove
1227 specific clearing of TDEP SIGCONTEXT_REGISTER_ADDRESS and
1230 2009-08-24 Keith Seitz <keiths@redhat.com>
1232 * c-exp.y (tokentab3): Add new token, ARROW_STAR. Changed all users.
1233 (tokentab2): Add new token, DOT_STAR. Changed all users.
1235 2009-08-24 Keith Seitz <keiths@redhat.com>
1237 * symtab.c (default_make_symbol_completion_list): Keep
1238 ':', too, so that we can limit searches in namespaces
1241 2009-08-24 Tom Tromey <tromey@redhat.com>
1243 * python/python-value.c (valpy_richcompare): Don't return from
1246 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1248 * CONTRIBUTE: Bump documented Autoconf version.
1249 * configure.ac: Do not substitute datarootdir, htmldir,
1250 pdfdir, docdir. Do not process --with-datarootdir,
1251 --with-htmldir, --with-pdfdir, --with-docdir.
1252 * configure: Regenerate.
1254 * aclocal.m4: Regenerate.
1255 * config.in: Likewise.
1256 * configure: Likewise.
1257 * gnulib/Makefile.in: Likewise.
1259 * configure.ac: Use AC_USE_SYSTEM_EXTENSIONS instead of
1260 AC_GNU_SOURCE, AC_AIX, AC_ISC_POSIX.
1262 2009-08-21 Paul Pluzhnikov <ppluzhnikov@google.com>
1264 * objfiles.h (gdb_bfd_ref): New prototype.
1265 * objfiles.c (gdb_bfd_ref): New function.
1266 (allocate_objfile): Call it.
1267 (gdb_bfd_unref): Adjust assertion.
1268 * solib.c (solib_map_sections): Add reference.
1269 (symbol_add_stub): Don't add reference here.
1270 * symfile.c (reread_symbols): Add reference.
1272 2009-08-21 Ken Werner <ken@linux.vnet.ibm.com>
1273 Doug Evans <dje@google.com>
1275 * jit.c (jit_event_handler): Use paddress to print target addresses.
1276 Wrap printf string in _().
1278 2009-08-21 Doug Evans <dje@google.com>
1280 * jit.c (jit_read_descriptor): New arg gdbarch, all callers updated.
1281 (jit_read_code_entry, jit_register_code): Ditto.
1282 (jit_event_handler): Ditto.
1283 (jit_inferior_init): Renamed from previous jit_inferior_created_hook.
1284 (jit_inferior_created_hook, jit_breakpoint_re_set): New functions.
1285 (jit_inferior_created_observer): Renamed from
1286 jit_inferior_created_hook1, all callers updated.
1287 * jit.h (jit_breakpoint_re_set): Declare.
1288 (jit_event_handler): Update prototype.
1289 * breakpoint.c (breakpoint_re_set): Call jit_breakpoint_re_set instead
1290 of jit_inferior_created_hook.
1292 2009-08-21 Hui Zhu <teawater@gmail.com>
1294 * record.c (record_wait): Change the argument of
1295 record_beneath_to_wait to options.
1297 2009-08-20 Jacob Potter <jdpotter@google.com>
1299 Replace dcache with splay tree.
1300 Remove partially implemented writeback support.
1301 * dcache.c: Include splay-tree.h.
1302 (LINE_SIZE_POWER): Change from 5 to 6.
1303 (DCACHE_SIZE): Change from 64 to 4096.
1304 (ENTRY_INVALID, ENTRY_VALID, ENTRY_DIRTY): Delete.
1305 (state_chars): Delete.
1306 (struct dcache_block): Clean up; remove state and anydirty fields.
1307 (struct dcache_struct): Redefine as a splay tree and linked list.
1308 (last_cache): Make static.
1309 (dcache_invalidate, dcache_hit): Rewrite for new cache structure.
1310 (dcache_read_line, dcache_alloc): Rewrite for new cache structure.
1311 (dcache_write_line): Delete.
1312 (dcache_writeback): Delete.
1313 (dcache_peek_byte): Clean up; remove "invalid" state check.
1314 (dcache_poke_byte): Rewrite for new cache structure; clarify comment.
1315 (dcache_splay_tree_compare): New function.
1316 (dcache_init, dcache_free): Rewrite for new cache structure.
1317 (dcache_xfer_memory): Rewrite for new write-through cache structure.
1318 (dcache_print_line): New function.
1319 (dcache_info): Rewrite for new cache structure.
1320 (_initialize_dcache): Update "info dcache" help text.
1321 * dcache.h (dcache_xfer_memory): Update declaration.
1322 * target.c (memory_xfer_partial): Update calls to dcache_xfer_memory.
1324 2009-08-19 Reid Kleckner <reid@kleckner.net>
1326 Add interface for JIT code generation.
1327 * NEWS: Announce JIT interface.
1328 * Makefile.in (SFILES): Add jit.c.
1329 (HFILES_NO_SRCDIR): Add jit.h.
1330 (COMMON_OBS): Add jit.o.
1333 * breakpoint.h (enum bptype): Add bp_jit_event to enum.
1335 (update_breakpoints_after_exec): Delete jit breakpoints after exec.
1336 (bpstat_what): Update event table for bp_jit_event.
1337 (print_it_typical): Added case for bp_jit_event.
1338 (print_one_breakpoint_location): Added case for bp_jit_event.
1339 (allocate_bp_location): Added case for bp_jit_event.
1340 (mention): Added case for bp_jit_event.
1341 (delete_command): Added case for bp_jit_event.
1342 (breakpoint_re_set_one): Added case for bp_jit_event.
1343 (breakpoint_re_set): Added call to jit_inferior_created_hook.
1344 (create_jit_event_breakpoint): New.
1345 * infrun.c (handle_inferior_event): Add handler for jit event.
1346 (follow_exec): Add call to jit_inferior_created_hook.
1348 2009-08-19 Ulrich Weigand <uweigand@de.ibm.com>
1350 * value.c (enum internalvar_kind): Replace INTERNALVAR_SCALAR by
1351 INTERNALVAR_INTEGER and INTERNALVAR_POINTER.
1352 (union internalvar_data): Replace "scalar" member by "integer"
1354 (value_of_internalvar): Handle INTERNALVAR_INTEGER and
1355 INTERNALVAR_POINTER instead of INTERNALVAR_SCALAR.
1356 (get_internalvar_integer): Likewise.
1357 (set_internalvar): Likewise.
1358 (set_internalvar_integer): Likewise.
1359 (preserve_one_internalvar): Likewise.
1360 (value_from_pointer): Handle typedef'd pointer types.
1362 2009-08-18 Tom Tromey <tromey@redhat.com>
1364 * utils.c (add_internal_problem_command): Free set_doc and
1366 * remote.c (add_packet_config_cmd): Free set_doc and show_doc.
1367 * language.c (add_language): Free language_set_doc.
1369 2009-08-18 Tom Tromey <tromey@redhat.com>
1371 * Makefile.in (ALL_TARGET_OBS): Remove prologue-value.o, solib.o.
1373 2009-08-17 Ulrich Weigand <uweigand@de.ibm.com>
1375 * symfile.c (reread_symbols): Call objfiles_changed *before*
1376 calling clear_symtab_users.
1378 2009-08-17 Michael Snyder <msnyder@vmware.com>
1380 * amd64-tdep.c: Add a frame unwinder for function epilogues.
1381 (amd64_in_function_epilogue_p): New function.
1382 (amd64_epilogue_frame_sniffer): New function.
1383 (amd64_epilogue_frame_cache): New function.
1384 (amd64_epilogue_frame_this_id): New function.
1385 (amd64_epilogue_frame_unwind): New struct frame_unwind.
1386 (amd64_init_abi): Hook the new unwinder.
1388 * amd64-linux-tdep.c (amd64_linux_init_abi): Set gdbarch to use
1389 SVR4 method for skip_trampoline_code.
1391 2009-08-17 Pedro Alves <pedro@codesourcery.com>>
1393 * objfiles.c (objfile_relocate): Relocate the entry point before
1394 relocating the section offsets. Flush the section map before
1395 resetting breakpoints.
1397 2009-08-14 Doug Evans <dje@google.com>
1399 * symfile.c (find_separate_debug_file): Remove double free of
1402 2009-08-14 Pedro Alves <pedro@codesourcery.com>
1404 * top.c (any_thread_of): Delete.
1405 (kill_or_detach): Use any_thread_of_process.
1406 * top.c (print_inferior_quit_action): New.
1407 (quit_confirm): Rewrite to print info about all inferiors.
1408 * target.c (dispose_inferior): New.
1409 (target_preopen): Use it.
1411 2009-08-14 Pedro Alves <pedro@codesourcery.com>
1413 * ui-file.h (ui_file_xstrdup): Mention that the length argument
1415 * ui-file.c (ui_file_xstrdup): Don't dereference LENGTH if it is
1417 * aix-thread.c (aix_thread_extra_thread_info): Pass NULL as length
1418 parameter to ui_file_xstrdup.
1419 * arm-tdep.c (_initialize_arm_tdep): Ditto.
1420 * infrun.c (print_target_wait_results): Ditto.
1421 * language.c (add_language): Ditto.
1422 * linespec.c (cplusplus_error): Ditto.
1423 * remote.c (escape_buffer): Ditto.
1424 * typeprint.c (type_to_string): Ditto.
1425 * utils.c (error_stream): Ditto.
1426 * varobj.c (value_get_print_value): Ditto.
1427 * xtensa-tdep.c (xtensa_verify_config): Replace `dummy' local with
1428 `length' local. Pass it to ui_file_xstrdup, and avoid an strlen
1430 * gdbarch.sh (verify_gdbarch): Ditto.
1431 * gdbarch.c: Regenerate.
1432 * cli/cli-setshow.c (do_setshow_command): Pass NULL as length
1433 parameter to ui_file_xstrdup.
1434 * python/python-frame.c (frapy_str): Ditto.
1435 * python/python-type.c (typy_str): Use the length local instead of
1437 * python/python-value.c (valpy_str): Pass NULL as length parameter
1440 2009-08-13 Doug Evans <dje@google.com>
1442 * utils.c (gnu_debuglink_crc32): Store crc32_table as unsigned int
1443 instead of unsigned long.
1445 2009-08-13 Tom Tromey <tromey@redhat.com>
1447 * varobj.c (update_dynamic_varobj_children): Don't use
1449 * value.h: (preserve_one_value): Declare.
1450 (value_prepend_to_list, value_remove_from_list): Remove.
1451 * value.c (preserve_one_value): No longer static.
1452 (preserve_values): Call preserve_python_values.
1453 (value_prepend_to_list): Remove.
1454 (value_remove_from_list): Remove.
1455 * python/python.h (values_in_python): Don't declare.
1456 (preserve_python_values): Declare.
1457 * python/python-value.c (values_in_python): Change type. Move
1459 (struct value_object): Add struct tag.
1460 <next, prev>: New fields.
1461 (valpy_dealloc): Update.
1462 (note_value): New function.
1463 (valpy_new): Use value_incref, note_value.
1464 (preserve_python_values): New function.
1465 (valpy_positive): Don't use value_copy.
1466 (value_to_value_object): Use value_incref, note_value.
1467 (convert_value_from_python): Update comment.
1469 2009-08-13 Pedro Alves <pedro@codesourcery.com>
1471 * remote.c (remote_pid_to_str): If printing a process id and we
1472 don't know what the remote pid could be, output "Remote target";
1473 otherwise, use normal_pid_to_str.
1475 2009-08-13 Tom Tromey <tromey@redhat.com>
1477 * language.h (longest_raw_hex_string): Remove unused declaration.
1479 2009-08-13 Pedro Alves <pedro@codesourcery.com>
1483 * language.c (language, type, range, case_sensitive): Make const.
1484 (show_language_command): Don't call deprecated_show_value_hack.
1485 Special case "auto".
1486 (set_language_command): An unrecognized language is now an
1487 internal error instead of a user error. Don't call set_lang_str.
1488 (show_type_command): Don't call deprecated_show_value_hack.
1489 Special case "auto". Use warning.
1490 (set_type_command): An unrecognized type is now an internal error
1491 instead of a user error. Output type check mismatch with language
1492 here. Don't call set_type_str.
1493 (show_range_command): Don't call deprecated_show_value_hack.
1494 Special case "auto". Use warning.
1495 (set_range_command): An unrecognized range check is now an
1496 internal error instead of a warning. Output range check mismatch
1497 with language here. Don't call set_range_str.
1498 (show_case_command): Don't call deprecated_show_value_hack.
1499 Special case "auto". Use warning.
1500 (set_case_command): Don't call set_case_str. An unrecognized case
1501 check is now an internal error instead of a warning. Output range
1502 check mismatch with language here. Don't call set_case_str.
1503 (set_type_range_case): Don't call set_type_str, set_range_str or
1505 (set_lang_str, set_type_str, set_range_str, set_case_str): Delete.
1506 (add_language): Install or reinstall the "set language" command
1507 here, and make it an enum command. Build the enumeration and the
1508 help string from the current list of known languages.
1509 (_initialize_language): Don't install "set language" here. Make
1510 "set check type", "set check range" and "set case-sensitive" enum
1511 commands. Register the "auto" "local" and "unknown" languages in
1514 2009-08-13 Pedro Alves <pedro@codesourcery.com>
1516 Revert 2009-08-07 changes for PR gdb/8869:
1518 * language.c (set_language_command): Strip whitespace.
1519 (set_type_command): Likewise.
1520 (set_range_command): Likewise.
1522 * language.c (language_completer): New function.
1523 (range_or_type_completer): New function.
1524 (case_completer): New function.
1525 (_initialize_language): Set completers.
1526 * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
1528 (add_setshow_string_noescape_cmd): Likewise.
1529 (add_setshow_integer_cmd): Likewise.
1530 (add_setshow_uinteger_cmd): Likewise.
1531 (add_setshow_zinteger_cmd): Likewise.
1532 (add_setshow_zuinteger_cmd): Likewise.
1533 * command.h (add_setshow_string_cmd,
1534 add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
1535 add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
1537 2009-08-12 Michael Snyder <msnyder@vmware.com>
1539 * remote.c (remote_add_inferior): Remove unused local.
1540 (remote_add_thread): Ditto.
1542 (remote_current_thread): Ditto.
1543 (remote_stop_ns): Ditto.
1544 (remote_parse_stop_reply): Ditto.
1545 (remote_get_pending_stop_replies): Ditto.
1546 (remote_wait_ns): Ditto.
1547 (remote_wait_as): Ditto.
1548 (send_g_packet): Ditto.
1549 (remote_fetch_registers): Ditto.
1550 (store_register_using_P): Ditto.
1551 (remote_store_registers): Ditto.
1552 (remote_remove_breakpoint): Ditto.
1553 (remote_write_qxfer): Ditto.
1554 (remote_read_qxfer): Ditto.
1556 2009-08-11 Tom Tromey <tromey@redhat.com>
1558 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Make a cleanup.
1559 (dwarf2_loc_desc_needs_frame): Likewise.
1560 * dwarf2expr.h (make_cleanup_free_dwarf_expr_context): Declare.
1561 * dwarf2expr.c (free_dwarf_expr_context_cleanup): New function.
1562 (make_cleanup_free_dwarf_expr_context): Likewise.
1563 * dwarf2-frame.c (execute_stack_op): Make a cleanup.
1565 2009-08-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1567 * objfiles.c (gdb_bfd_unref): Use the bfd_usrdata accessor.
1568 * solib.c (symbol_add_stub): Likewise.
1569 * symfile.c (symfile_bfd_open): Assert BFD_USRDATA is NULL.
1571 2009-08-10 Paul Pluzhnikov <ppluzhnikov@google.com>
1573 * objfiles.c (qsort_cmp): Remove assert.
1574 (preferred_obj_section): New function.
1575 (update_section_map): Filter duplicates.
1577 2009-08-10 Tristan Gingold <gingold@adacore.com>
1579 * solib-darwin.c (find_program_interpreter): Simplify the code by
1580 looking up for the load_dylinker command instead of reading the
1581 corresponding (but deprecated) section.
1582 (darwin_solib_create_inferior_hook): Adjust: do not free the
1585 2009-08-10 Tristan Gingold <gingold@adacore.com>
1587 * i386-darwin-tdep.c (i386_m128_p): New function.
1588 (i386_darwin_arg_type_alignment): Ditto.
1589 (i386_darwin_push_dummy_call): Ditto.
1590 (i386_darwin_init_abi): Define Darwin specific push_dummy_call.
1591 Adjust long_double size. Adjust pc offset in setjump buffer.
1593 2009-08-10 Hui Zhu <teawater@gmail.com>
1595 Add Linux AMD64 process record support.
1597 * amd64-linux-tdep.c (amd64_linux_record_tdep): New variable.
1598 This struct has the argument for the function
1599 "record_linux_system_call".
1600 (amd64_linux_syscall_record): New function. Parse the
1601 system call instruction and call function
1602 "record_linux_system_call" to record execute log.
1603 (i386_linux_init_abi): Initialize "amd64_linux_record_tdep".
1604 Set "amd64_linux_syscall_record" to "i386_syscall_record".
1606 2009-08-10 Hui Zhu <teawater@gmail.com>
1608 Add process record Linux system call 64 bits support.
1610 * linux-record.h (linux_record_tdep): Add size_pointer,
1611 size_size_t, size_iovec and arg6. Change the values of
1612 size_int, size_long and size_ulong to
1613 gdbarch_int_bit (gdbarch) / TARGET_CHAR_BIT,
1614 gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT,
1615 gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT.
1616 * i386-linux-tdep.c (i386_linux_init_abi): Ditto.
1617 (i386_linux_intx80_sysenter_record): Add a check for system
1619 * linux-record.c (record_linux_system_call): Make this
1620 function support 64 bits.
1622 2009-08-10 Hui Zhu <teawater@gmail.com>
1624 Add AMD64 process record instruction set support.
1626 * i386-tdep.h (gdbarch_tdep): Add record_regmap for registers
1627 because the AMD64's registers order in GDB is not same with
1629 Add i386_syscall_record to be the syscall function handle
1631 (record_i386_regnum): Number for record_regmap.
1632 * i386-tdep.c (OT_QUAD): For 64 bits.
1633 (i386_record_s): Add rex_x, rex_b, rip_offset and
1634 popl_esp_hack for AMD64 instruction set. And regmap for
1636 (i386_record_lea_modrm_addr): Support AMD64 instruction set
1638 (i386_record_lea_modrm): Ditto.
1639 (i386_record_push): New function. Record the execution log
1641 (I386_RECORD_ARCH_LIST_ADD_REG): New macro to record the
1643 (i386_process_record): Support AMD64 instruction set.
1644 * amd64-tdep.c (amd64_record_regmap): For record_regmap.
1645 (amd64_init_abi): Set amd64_record_regmap to record_regmap.
1647 2009-08-08 Pedro Alves <pedro@codesourcery.com>
1649 * bfd-target.c (struct target_bfd_data): New.
1650 (target_bfd_xfer_partial): Adjust to get at the section table from
1652 (target_bfd_get_section_table): Ditto.
1653 (target_bfd_xclose): Ditto. Get the bfd pointer from the
1654 target_bfd_data structure, from the section table.
1655 (target_bfd_reopen): Store a struct target_bfd_data in the
1656 target_ops to_data field, instead of a target_section_table.
1658 2009-08-08 Aleksandar Ristovski <aristovski@qnx.com>
1659 Hui Zhu <teawater@gmail.com>
1661 * record.c (record_store_registers): Remove unused variable.
1663 2009-08-07 Tom Tromey <tromey@redhat.com>
1665 * language.c (set_language_command): Strip whitespace.
1666 (set_type_command): Likewise.
1667 (set_range_command): Likewise.
1669 2009-08-07 Tom Tromey <tromey@redhat.com>
1672 * language.c (language_completer): New function.
1673 (range_or_type_completer): New function.
1674 (case_completer): New function.
1675 (_initialize_language): Set completers.
1676 * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
1678 (add_setshow_string_noescape_cmd): Likewise.
1679 (add_setshow_integer_cmd): Likewise.
1680 (add_setshow_uinteger_cmd): Likewise.
1681 (add_setshow_zinteger_cmd): Likewise.
1682 (add_setshow_zuinteger_cmd): Likewise.
1683 * command.h (add_setshow_string_cmd,
1684 add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
1685 add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
1687 2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
1690 * dwarf2-frame.c (qsort_fde_cmp): Use stable sort.
1692 2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
1694 * dwarf2-frame.c (struct dwarf2_cie): Remove 'next'.
1695 (struct dwarf2_cie_table): New.
1696 (struct dwarf2_fde): Remove 'next'.
1697 (struct dwarf2_fde_table): New.
1698 (struct comp_unit): Remove 'cie'.
1699 (bsearch_cie_cmp, bsearch_fde_cmp): New function.
1700 (find_cie, dwarf2_frame_find_fde): Use bsearch.
1701 (add_cie, add_fde): Use array instead of linked list.
1702 (decode_frame_entry, decode_frame_entry_1): New parameters.
1703 (qsort_fde_cmp): New function.
1704 (dwarf2_build_frame_info): Adjust.
1706 2009-08-06 Don Lee <don.lee@sunplusct.com>
1708 * score-tdep.c: Support a new Sunplus CT S+core variant, S+core 3.
1709 * score-tdep.h: Ditto.
1711 * configure.tgt: Test do we have a simulator.
1712 * MAINTAINERS: Add myself under target score
1714 2009-08-06 Nick Roberts <nickrob@snap.net.nz>
1716 * utils.c (defaulted_query): Don't ask for confirmation if server
1719 2009-08-05 Tom Tromey <tromey@redhat.com>
1721 * spu-tdep.h (SPUADDR_SPU): Cast result to int.
1723 2009-08-04 Paul Pluzhnikov <ppluzhnikov@google.com>
1725 * objfiles.h (OBJF_KEEPBFD): Delete.
1726 (gdb_bfd_unref): New prototype.
1727 * objfiles.c (gdb_bfd_unref): New function.
1728 (free_objfile): Call gdb_bfd_unref.
1729 * solib.c (free_so): Likewise.
1730 (symbol_add_stub): Set refcount.
1732 2009-08-04 Hui Zhu <teawater@gmail.com>
1733 Michael Snyder <msnyder@vmware.com>
1735 * record.c (record_mem_entry): New field 'mem_entry_not_accessible'.
1736 (record_arch_list_add_mem): Initialize 'mem_entry_not_accessible'.
1737 (record_wait): Set 'mem_entry_not_accessible' flag if target
1738 memory not readable. Don't try to change target memory if
1739 'mem_entry_not_accessible' is set.
1741 2009-08-03 Richard Guenther <rguenther@suse.de>
1742 Jan Kratochvil <jan.kratochvil@redhat.com>
1744 Fix memory corruption on reread of file through a symbolic link.
1745 * symfile.c (find_separate_debug_file): Initialize CANON_NAME earlier.
1746 Allocate DEBUGFILE with length based on CANON_NAME. Free CANON_NAME on
1747 all the return paths.
1749 2009-08-03 Jim Ingham <jingham@apple.com>
1750 Vladimir Prus <vladimir@codesourcery.com>
1752 Implement -break-commands
1754 * breakpoint.c (get_breakpoint, breakpoint_set_commands): New.
1755 (commands_command): Use breakpoint_set_commands.
1756 * breakpoint.h (get_breakpoint, breakpoint_set_commands): Declare.
1758 * mi/mi-cmds.h (mi_cmd_break_commands): New.
1759 * mi/mi-cmds.c: Register -break-commands.
1760 * mi/mi-cmd-break.c (mi_cmd_break_commands, mi_read_next_line)
1761 (mi_command_line_array, mi_command_line_array_cnt)
1762 (mi_command_line_array_ptr): New.
1764 2009-08-03 Jim Ingham <jingham@apple.com>
1765 Vladimir Prus <vladimir@codesourcery.com>
1767 Refactor reading of commands
1769 * defs.h (read_command_lines_1): Declare.
1770 * cli/cli-script.c (read_next_line): Only return string,
1772 (process_next_line): New, extracted from read_next_line.
1773 (recurse_read_control_structure): Take a function pointer to the
1775 (get_command_line) Pass the read_next_line as reader function
1776 into recurse_read_control_structure.
1777 (read_command_lines_1): New, extracted from...
1778 (read_command_lines): ...here.
1780 2009-07-31 Kazu Hirata <kazu@codesourcery.com>
1782 * procfs.c (proc_set_current_signal): Populate mysinfo before
1784 (proc_clear_current_signal): Likewise.
1785 (proc_set_watchpoint): Populate pwatch before copying it to arg.
1787 2009-07-31 Michael Snyder <msnyder@vmware.com>
1789 * remote.c (store_register_using_P): Call putpkt and getpkt
1790 directly instead of calling remote_send.
1791 (store_registers_using_G): Ditto.
1792 (fetch_register_using_p): Ditto.
1794 * remote.c (store_register_using_P): Make error msg more verbose.
1795 (store_registers_using_G): Ditto.
1796 (fetch_register_using_p): Ditto.
1798 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1800 * spu-tdep.c: Include "infcall.h".
1801 (spu_address_class_type_flags): New function.
1802 (spu_address_class_type_flags_to_name): Likewise.
1803 (spu_address_class_name_to_type_flags): Likewise.
1804 (spu_pointer_to_address): Handle __ea pointers.
1805 (spu_auto_flush_cache_p): New static variable.
1806 (spu_objfile_from_frame): New function.
1807 (flush_ea_cache, spu_attach_normal_stop): Likewise.
1808 (show_spu_auto_flush_cache): Likewise.
1809 (spu_gdbarch_init): Install address class handlers.
1810 (_initialize_spu_tdep): Attach to normal_stop observer.
1811 Install "set spu auto-flush-cache" / "show spu auto-flush-cache"
1814 * NEWS: Mention "set/show spu auto-flush-cache" commands.
1816 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1818 * spu-tdep.c: Include "block.h".
1819 (setspucmdlist, showspucmdlist): New static variables.
1820 (spu_stop_on_load_p): Likewise.
1821 (spu_catch_start): New function.
1822 (show_spu_command, set_spu_command): New functions.
1823 (show_spu_stop_on_load): Likewise.
1824 (_initialize_spu_tdep): Attach spu_catch_start to new_objfile observer.
1825 Install "set spu" / "show spu" prefix command handler.
1826 Install "set spu stop-on-load" / "show spu stop-on-load" command.
1828 * NEWS: Mention "set/show spu stop-on-load" commands.
1830 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1832 * ppc-linux-tdep.c: Include "solib.h", "solist.h", "exceptions.h",
1833 "arch-utils.h", and "spu-tdep.h".
1834 (spu_context_objfile, spe_context_lm_addr, spe_context_offset):
1835 New static variables.
1836 (spe_context_cache_ptid, spe_context_cache_address): Likewise.
1837 (ppc_linux_spe_context_lookup): New function.
1838 (ppc_linux_spe_context_inferior_created): Likewise.
1839 (ppc_linux_spe_context_solib_loaded): Likewise.
1840 (ppc_linux_spe_context_solib_unloaded): Likewise.
1841 (ppc_linux_spe_context): Likewise.
1842 (struct ppu2spu_cache, struct ppu2spu_data): New data types.
1843 (ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register,
1844 ppu2spu_unwind_register, ppu2spu_sniffer,
1845 ppu2spu_dealloc_cache): New functions.
1846 (ppu2spu_unwind): New static variable.
1847 (ppc_linux_init_abi): Install cross-architecture unwinder.
1848 (_initialize_ppc_linux_tdep): Attach to observers.
1850 * spu-tdep.c (struct spu2ppu_cache): New data type.
1851 (spu2ppu_prev_arch, spu2ppu_this_id, spu2ppu_prev_register,
1852 spu2ppu_sniffer, spu2ppu_dealloc_cache): New functions.
1853 (spu2ppu_unwind): New static variable.
1854 (spu_gdbarch_init): Install cross-architecture unwinder.
1856 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1858 * target.h (enum strata): New value arch_stratum.
1859 * target.c (target_require_runnable): Skip arch_stratum targets.
1861 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
1862 solib-spu.o and spu-multiarch.o to gdb_target_obs.
1863 * Makefile.in (ALL_TARGET_OBS): Add solib-spu.o and spu-multiarch.o.
1864 (ALLDEPFILES): Add solib-spu.c and spu-multiarch.c.
1866 * solib-spu.c: New file.
1867 * solib-spu.h: New file.
1868 * spu-multiarch.c: New file.
1870 * spu-tdep.h (SPUADDR, SPUADDR_SPU, SPUADDR_ADDR): New macros.
1872 * spu-tdep.c (struct gdbarch_tdep): New member id.
1873 (spu_gdbarch_id): New function.
1874 (spu_lslr): New function.
1876 (spu_address_to_pointer): New function.
1877 (spu_pointer_to_address): Support SPU ID address encoding. Use
1878 spu_gdbarch_id and spu_lslr.
1879 (spu_integer_to_address): Likewise.
1880 (spu_frame_unwind_cache): Update for encoded addresses.
1881 (spu_unwind_pc, spu_unwind_sp): Likewise.
1882 (spu_read_pc, spu_write_pc): Likewise.
1883 (spu_push_dummy_call): Likewise.
1884 (spu_software_single_step): Likewise.
1885 (spu_get_longjmp_target): Likewise.
1886 (spu_overlay_update_osect): Likewise.
1888 (spu_dis_asm_print_address): New function.
1889 (gdb_print_insn_spu): Likewise.
1891 (spu_gdbarch_init): Store SPU ID in tdep structure.
1892 Install spu_address_to_pointer and gdb_print_insn_spu.
1894 * ppc-linux-tdep.c: Include "observer.h", "auxv.h", "elf/common.h"
1896 (ppc_linux_entry_point_addr): New static variable.
1897 (ppc_linux_inferior_created): New function.
1898 (ppc_linux_displaced_step_location): Likewise.
1899 (ppc_linux_init_abi): Enable Cell/B.E. support if supported
1901 (_initialize_ppc_linux_tdep): Attach to inferior_created observer.
1903 * NEWS: Mention multi-architecture and Cell/B.E. debugging
1906 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1908 * linux-nat.c: Include <sys/vfs.h>.
1909 (SPUFS_MAGIC): Define.
1910 (spu_enumerate_spu_ids): New function.
1911 (linux_proc_xfer_spu): New function.
1912 (linux_xfer_partial): Handle TARGET_OBJECT_SPU.
1914 (iterate_over_spus): New function.
1915 (struct linux_spu_corefile_data): New data type.
1916 (linux_spu_corefile_callback): New function.
1917 (linux_spu_make_corefile_notes): New function.
1918 (linux_nat_make_corefile_notes): Call it.
1920 * corelow.c (struct spuid_list): New data type.
1921 (add_to_spuid_list): New function.
1922 (core_xfer_partial): Handle TARGET_OBJECT_SPU.
1924 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1926 * features/Makefile: Allow sub-platform specific expedite settings.
1927 (WHICH): Add rs6000/powerpc-cell32l and rs6000/powerpc-cell64l.
1928 (rs6000/powerpc-cell32l-expedite): Define.
1929 (rs6000/powerpc-cell64l-expedite): Likewise.
1930 * features/rs6000/powerpc-cell32l.xml: New file.
1931 * features/rs6000/powerpc-cell64l.xml: New file.
1932 * features/rs6000/powerpc-cell32l.c: New generated file.
1933 * features/rs6000/powerpc-cell64l.c: New generated file.
1935 * regformats/rs6000/powerpc-cell32l.dat: New generated file.
1936 * regformats/rs6000/powerpc-cell64l.dat: New generated file.
1938 * config/djgpp/fnchange.lst: Add mappings for new files.
1940 * ppc-linux-tdep.h (tdesc_powerpc_cell32l): Add prototype.
1941 (tdesc_powerpc_cell64l): Likewise.
1942 * ppc-linux-tdep.c: Include "features/rs6000/powerpc-cell32l.c"
1943 and "features/rs6000/powerpc-cell64l.c".
1944 (_initialize_ppc_linux_tdep): Initialize target descriptions.
1945 (ppc_linux_spu_section): New function.
1946 (ppc_linux_core_read_description): Detect Cell/B.E. core files.
1947 * ppc-linux-nat.c (PPC_FEATURE_CELL): Define.
1948 (ppc_linux_read_description): Detect Cell/B.E. architecture.
1950 * rs6000-tdep.c (rs6000_gdbarch_init): Do not trust BFD wordsize
1951 if exec file is not PowerPC architecture.
1953 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1955 * features/gdb-target.dtd (target): Accept optional
1956 <compatible> elements.
1957 (compatible): Define element.
1959 * target-descriptions.h (tdesc_compatible_p): New.
1960 (tdesc_add_compatible): New.
1961 * target-descriptions.c (arch_p): New VEC_P type.
1962 (struct target_desc): New member compatible.
1963 (free_target_description): Handle it.
1964 (maint_print_c_tdesc_cmd): Likewise.
1965 (tdesc_compatible_p): New function.
1966 (tdesc_add_compatible): New function.
1968 * xml-tdesc.c (tdesc_end_compatible): New function.
1969 (target_children): Handle <compatible> element.
1971 * arch-utils.c (choose_architecture_for_target): Accept target
1972 description instead of BFD architecture as input. Query target
1973 description for compatible architectures.
1974 (gdbarch_info_fill): Update call.
1976 * NEWS: Mention <compatible> element of target descriptions.
1978 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1980 * breakpoint.c (remove_breakpoints): If removing one breakpoint
1981 location fails, still continue to remove other locations.
1982 (remove_hw_watchpoints): Likewise.
1983 (detach_breakpoints): Likewise.
1985 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1987 * breakpoint.h (enum enable_state): Add bp_startup_disabled.
1988 (disable_breakpoints_before_startup): Add prototype.
1989 (enable_breakpoints_after_startup): Likewise.
1991 * breakpoint.c (executing_startup): New static variable.
1992 (describe_other_breakpoints): Handle bp_startup_disabled.
1993 (check_duplicates_for): Likewise.
1994 (disable_breakpoints_before_startup): New function.
1995 (enable_breakpoints_after_startup): New function.
1996 (create_breakpoint): Mark new breakpoints as bp_startup_disabled
1997 if executing_startup flag is true.
1998 (break_command_really): Likewise.
1999 (breakpoint_re_set_one): Skip bp_startup_disabled breakpoints.
2001 2009-07-31 Julian Brown <julian@codesourcery.com>
2003 * arm-linux-tdep.c (arch-utils.h, inferior.h, gdbthread.h, symfile.h):
2005 (arm_linux_cleanup_svc, arm_linux_copy_svc): New.
2006 (cleanup_kernel_helper_return, arm_catch_kernel_helper_return): New.
2007 (arm_linux_displaced_step_copy_insn): New.
2008 (arm_linux_init_abi): Initialise displaced stepping callbacks.
2009 * arm-tdep.c (DISPLACED_STEPPING_ARCH_VERSION): New macro.
2011 (displaced_read_reg, displaced_in_arm_mode, branch_write_pc)
2012 (bx_write_pc, load_write_pc, alu_write_pc, displaced_write_reg)
2013 (insn_references_pc, copy_unmodified, cleanup_preload, copy_preload)
2014 (copy_preload_reg, cleanup_copro_load_store, copy_copro_load_store)
2015 (cleanup_branch, copy_b_bl_blx, copy_bx_blx_reg, cleanup_alu_imm)
2016 (copy_alu_imm, cleanup_alu_reg, copy_alu_reg)
2017 (cleanup_alu_shifted_reg, copy_alu_shifted_reg, cleanup_load)
2018 (cleanup_store, copy_extra_ld_st, copy_ldr_str_ldrb_strb)
2019 (cleanup_block_load_all, cleanup_block_store_pc)
2020 (cleanup_block_load_pc, copy_block_xfer, cleanup_svc, copy_svc)
2021 (copy_undef, copy_unpred): New.
2022 (decode_misc_memhint_neon, decode_unconditional)
2023 (decode_miscellaneous, decode_dp_misc, decode_ld_st_word_ubyte)
2024 (decode_media, decode_b_bl_ldmstm, decode_ext_reg_ld_st)
2025 (decode_svc_copro, arm_process_displaced_insn)
2026 (arm_displaced_init_closure, arm_displaced_step_copy_insn)
2027 (arm_displaced_step_fixup): New.
2028 (arm_gdbarch_init): Initialise max insn length field.
2029 * arm-tdep.h (DISPLACED_TEMPS, DISPLACED_MODIFIED_INSNS): New
2031 (displaced_step_closure, pc_write_style): New.
2032 (arm_displaced_init_closure, displaced_read_reg)
2033 (arm_process_displaced_insn, arm_displaced_init_closure)
2034 (displaced_read_reg, displaced_write_reg, arm_displaced_step_copy_insn)
2035 (arm_displaced_step_fixup): Add prototypes.
2037 2009-07-31 Pedro Alves <pedro@codesourcery.com>
2038 Julian Brown <julian@codesourcery.com>
2040 * infrun.c (displaced_step_fixup): If this is a software
2041 single-stepping arch, don't tell the target to single-step.
2042 (maybe_software_singlestep): Return 0 if we're using displaced
2044 (resume): If this is a software single-stepping arch, and
2045 displaced-stepping is enabled, use it for all single-step
2048 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
2050 * Makefile.in (ACLOCAL, ACLOCAL_AMFLAGS, aclocal_m4_deps)
2051 (AUTOCONF, configure_deps, AUTOHEADER): New variables.
2052 ($(srcdir)/aclocal.m4, $(srcdir)/configure, $(srcdir)/config.in)
2053 (am--refresh): New rules.
2054 (stamp-h, config.status): List config.in and configure including
2056 * aclocal.m4: Regenerate.
2057 * configure: Regenerate.
2059 2009-07-30 Thomas Schwinge <tschwinge@gnu.org>
2061 * gnu-nat.c (add_task_commands) <stopped>: Register the correct
2064 2009-07-30 H.J. Lu <hongjiu.lu@intel.com>
2066 * ia64-tdep.c (ia64_access_reg): Correct paddress.
2068 2009-07-30 Jan Kratochvil <jan.kratochvil@redhat.com>
2070 Replace public function varobj_list by all_root_varobjs iterator.
2071 * mi/mi-cmd-var.c (struct mi_cmd_var_update, mi_cmd_var_update_iter):
2073 (mi_cmd_var_update): Replace the varobj_list call by all_root_varobjs.
2074 Remove the variables rootlist, cr. New variable data.
2075 * varobj.c (rootcount, varobj_list): Remove.
2076 (install_variable, uninstall_variable): Remove the rootcount updates.
2077 (all_root_varobjs): New function.
2078 (varobj_invalidate): Use the all_root_varobjs call. Move the code to...
2079 (varobj_invalidate_iter): ... a new function.
2080 * varobj.h (varobj_list): Remove the prototype.
2081 (all_root_varobjs): New prototype.
2083 2009-07-29 Paul Pluzhnikov <ppluzhnikov@google.com>
2086 * dbxread.c (read_dbx_symtab): Reduce stack use.
2088 2009-07-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2090 Fix gcc-4.5 HEAD warnings.
2091 * cp-name-parser.y (%union <typed_val_int>, %token GLOBAL)
2092 (GLOBAL_CONSTRUCTORS, GLOBAL_DESTRUCTORS, demangler_special <GLOBAL>):
2094 (yylex <"global constructors keyed to ">)
2095 (yylex <"global destructors keyed to ">): Base it on DEMANGLER_SPECIAL.
2096 (cp_comp_to_string): Remove variables str, prefix and buf. Remove the
2097 GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS handling.
2098 (cp_print): Remove the GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS
2101 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
2103 * NEWS: Mention ARM VFP support.
2104 * target-descriptions.c (tdesc_register_type): Make public.
2105 (tdesc_unnumbered_register): New function.
2106 (tdesc_register_reggroup_p): Allow missing
2107 pseudo_register_reggroup_p.
2108 * target-descriptions.h (tdesc_register_type): Declare.
2109 (tdesc_unnumbered_register): Declare.
2110 * arm-tdep.c (arm_neon_quad_read, arm_neon_quad_write): New functions.
2111 (arm_push_dummy_call): Use arm_neon_quad_write.
2112 (arm_neon_double_type, arm_neon_quad_type): New functions.
2113 (arm_register_type): Handle VFP and NEON registers. Override the
2114 types of double-precision registers for NEON. Disable FPA registers
2115 if they are not present.
2116 (arm_dwarf_reg_to_regnum): Add current VFP and NEON register numbers.
2117 (arm_return_value): Use arm_neon_quad_write and arm_neon_quad_read.
2118 (arm_register_name): Handle VFP single and NEON quad registers.
2119 (arm_pseudo_read, arm_pseudo_write): New functions.
2120 (arm_gdbarch_init): Check for VFP and NEON in the target description.
2121 Assign numbers to double-precision registers. Register VFP and NEON
2122 pseudo registers. Remove a shadowed "i" variable.
2123 * arm-tdep.h (enum gdb_regnum): Add ARM_D0_REGNUM and
2125 (struct gdbarch_tdep): Add have_neon_pseudos, have_neon,
2126 have_vfp_registers, have_vfp_pseudos, neon_double_type,
2129 * features/Makefile: Make expedite settings only architecture
2131 (WHICH): Add new ARM descriptions.
2132 * features/arm-with-neon.xml, features/arm-with-vfpv2.c,
2133 features/arm-with-vfpv3.c, features/arm-vfpv2.xml,
2134 features/arm-vfpv3.xml, features/arm-with-vfpv2.xml,
2135 features/arm-with-vfpv3.xml, features/arm-with-neon.c: New files.
2136 * regformats/arm-with-neon.dat, regformats/arm-with-vfpv2.dat,
2137 regformats/arm-with-vfpv3.dat: Generate.
2139 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
2141 * infrun.c (handle_inferior_event): Clear trap_expected after
2142 stepping past a single-step breakpoint.
2144 2009-07-28 Joseph Myers <joseph@codesourcery.com>
2146 * arm-tdep.c (enum arm_vfp_cprc_base_type,
2147 arm_vfp_cprc_unit_length, arm_vfp_cprc_reg_char,
2148 arm_vfp_cprc_sub_candidate, arm_vfp_call_candidate,
2149 arm_vfp_abi_for_function): New.
2150 (arm_push_dummy_call): Handle VFP ABI.
2151 (arm_extract_return_value, arm_store_return_value): Handle
2153 (arm_return_value): Handle VFP ABI.
2154 (arm_gdbarch_init): Default fp_model based on Tag_ABI_VFP_args for
2157 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
2159 * arch-utils.c (displaced_step_at_entry_point): Do not call
2160 gdbarch_convert_from_func_ptr_addr.
2161 * cris-tdep.c: Remove outdated comment.
2162 * infcall.c (call_function_by_hand): Do not call
2163 gdbarch_convert_from_func_ptr_addr after entry_point_address.
2164 * objfiles.c (entry_point_address): Call both
2165 gdbarch_convert_from_func_ptr_addr and
2166 gdbarch_addr_bits_remove.
2168 2009-07-28 Aleksandar Ristovski <aristovski@qnx.com>
2170 * nto-tdep.c (nto_thread_state_str): New array.
2171 (nto_extra_thread_info): New function definition.
2172 * nto-tdep.h (gdbthread.h): New include.
2173 (private_thread_info): New struct.
2174 (nto_extra_thread_info): New declaration.
2175 * nto-procfs.c (procfs_thread_alive): Properly check if
2176 thread is still alive.
2177 (update_thread_private_data_name, update_thread_private_data): New
2178 function definition.
2179 (procfs_find_new_threads): Fetch thread private data.
2180 (init_procfs_ops): Register to_extra_thread_info.
2182 2009-07-25 Pedro Alves <pedro@codesourcery.com>
2184 * stack.c (backtrace_command_1): Remove dead check of NULL current
2187 2009-07-23 Keith Seitz <keiths@redhat.com>
2189 * source.c (forward_search_command): Don't fclose the stream,
2190 just run the cleanups.
2191 (reverse_search_command): Likewise.
2193 2009-07-23 Paul Pluzhnikov <ppluzhnikov@google.com>
2195 * symtab.c (search_symbols): Add QUIT.
2197 2009-07-22 Paul Pluzhnikov <ppluzhnikov@google.com>
2199 * symfile.c (symbol_file_add_with_addrs_or_offsets): Call observer.
2201 2009-07-22 Paul Pluzhnikov <ppluzhnikov@google.com>
2203 * objfiles.h (objfiles_changed): New prototype.
2204 * objfiles.c (objfiles_updated_p): Rename to objfiles_changed_p.
2205 (allocate_objfile, free_objfile): Must rebuild section map.
2206 (objfile_relocate): Likewise.
2207 (update_section_map, find_pc_section): Adjust.
2208 (set_objfiles_updated_on_exe_change): Remove.
2209 (set_objfiles_updated_on_solib_activity): Remove.
2210 (_initialize_objfiles): Remove.
2211 (objfiles_changed): New function.
2212 * symfile.c (reread_symbols): Call objfiles_changed.
2214 2009-07-22 Hui Zhu <teawater@gmail.com>
2216 * record.c (record_xfer_partial): Call error When nquery
2219 2009-07-21 Paul Pluzhnikov <ppluzhnikov@google.com>
2221 * objfiles.c (objfiles_updated_p): New variable.
2222 (qsort_cmp, bsearch_cmp, update_section_map): New function.
2223 (find_pc_section): Use bsearch.
2224 (set_objfiles_updated_on_exe_change): New function.
2225 (set_objfiles_updated_on_solib_activity): New function.
2226 (_initialize_objfiles): New function.
2228 2009-07-21 Michael Eager <eager@eagercon.com>
2230 * features/rs6000/powerpc-405.xml: New.
2231 * rs6000-tdep.c: Add include & initialize for
2232 powerpc-405.c, add 405 to variants.
2233 * features/rs6000/powerpc-405.c: Generate.
2235 2009-07-21 Paul Pluzhnikov <ppluzhnikov@google.com>
2237 * utils.c (internal_vproblem): Always print failure message.
2239 2009-07-21 Daniel Jacobowitz <dan@codesourcery.com>
2240 Vladimir Prus <vladimir@codesourcery.com>
2242 * valops.c (value_fetch_lazy): Handle bitfields explicitly.
2243 (value_assign): Remove unnecessary FIXME. Honor the container
2244 type of bitfields if possible.
2245 * value.c (struct value): Add parent field.
2246 (value_parent): New function.
2247 (value_free): Free the parent also.
2248 (value_copy): Copy the parent also.
2249 (value_primitive_field): Do not read the contents of a lazy
2250 value to create a child bitfield value. Set bitpos and offset
2251 according to the container type if possible.
2252 (unpack_bits_as_long): Rename from unpack_field_as_long. Take
2253 field_type, bitpos, and bitsize instead of type and fieldno.
2254 (unpack_field_as_long): Use unpack_bits_as_long.
2255 * value.h (value_parent, unpack_bits_as_long): New prototypes.
2257 2009-07-21 Daniel Jacobowitz <dan@codesourcery.com>
2259 * value.c (struct value): Add reference_count field.
2260 (allocate_value_lazy): Initialize reference_count.
2261 (value_incref): New function.
2262 (value_free): Check the reference count.
2263 * value.h (value_incref): New prototype.
2265 2009-07-20 Marc Khouzam <marc.khouzam@ericsson.com>
2267 * utils.c (defaulted_query): Update comment and remove dead code.
2269 2009-07-20 Doug Evans <dje@google.com>
2271 Add support for "comdat types" from DWARF4.
2272 * dwarf2read.c (dwarf2_per_objfile): New member types,
2274 (TYPES_SECTION): New macro.
2275 (dwarf2_per_cu_data): Change size of length field from 30 bits
2276 to 29 bits. New member from_debug_types.
2277 (signatured_type): New struct.
2278 (struct attribute): New union member signatured_type.
2279 (DW_SIGNATURED_TYPE): New macro.
2280 (dwarf2_attr_no_follow): New function.
2281 (read_type_unit_scope): New function.
2282 (follow_die_ref_or_sig, follow_die_sig): New functions.
2283 (dwarf2_locate_sectoins): Handle .debug_types.
2284 (dwarf2_build_psymtabs): Read .debug_types.
2285 (read_type_comp_unit_head): New function.
2286 (hash_type_signature, eq_type_signature): New functions.
2287 (create_debug_types_hash_table): New function.
2288 (lookup_signatured_type): New function.
2289 (process_psymtab_comp_unit): Handle type units too.
2290 (process_type_comp_unit, build_type_psymtabs): New functions.
2291 (dwarf2_build_psymtabs_hard): Call build_type_psymtabs.
2292 (load_partial_comp_unit): Assert not called for a type unit.
2293 (skip_one_die): Handle DW_FORM_sig8.
2294 (queue_comp_unit): Don't call load_full_comp_unit here, or
2295 update read_in_chain.
2296 (psymtab_to_symtab_1): Call read_signatured_type_at_offset for
2297 type units, or load_full_comp_unit for comp units after
2298 queue_comp_unit returns.
2299 (load_full_comp_unit): Assert not called for type units.
2300 (load_full_comp_unit): Update read_in_chain here.
2301 (process_die): Handle DW_TAG_type_unit.
2302 (read_structure_type): Look for signatured types.
2303 (read_enumeration_type): Ditto.
2304 (init_cu_die_reader): Handle .debug_types.
2305 (read_comp_unit): Assert hash not computed yet.
2306 (read_die_and_children): Expand debugging printf to handle .debug_types.
2307 (read_partial_die): Handle DW_TAG_type_unit:
2308 (find_patial_die): Handle .debug_types.
2309 (read_attribute_value): Handle DW_FORM_sig8.
2310 (die_type): Call follow_die_ref_or_sig instead of follow_die_ref.
2311 (die_containing_type): Ditto.
2312 (dwarf_tag_name): Handle DW_TAG_type_unit.
2313 (dwarf_attr_name): Handle DW_AT_signature.
2314 (dwarf_form_name): Handle DW_FORM_sec_offset, DW_FORM_exprloc,
2315 DW_FORM_flag_present, DW_FORM_sig8.
2316 (dump_die_shallow): Handlel DW_FORM_sig8.
2317 (maybe_queue_comp_unit): Change return type to int from void.
2318 All callers updated.
2319 (follow_die_ref): Handle .debug_types.
2320 (lookup_signatured_type_at_offset): New function.
2321 (read_signatured_type_at_offset): New function.
2322 (read_signatured_type): New function.
2324 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
2326 * arch-utils.c (gdbarch_info_fill): Only reference GDB_OSABI_DEFAULT
2327 if the macro is defined.
2329 2009-07-20 Pedro Alves <pedro@codesourcery.com>
2331 * features/gdb-target.dtd (target): Accept an optional 'osabi'
2333 (osabi): Define element.
2334 * features/mips-linux.xml (target): Add an osabi subelement set to
2336 * regformats/regdat.sh (xmlarch, xmlosabi): New variables. Don't
2337 write the architecture into $xmltarget. Store it in $xmlarch.
2338 Handle the 'osabi' type. Handle outputting the osabi element of
2339 the target description.
2340 * regformats/reg-x86-64-linux.dat (osabi): Set to GNU/Linux.
2341 * regformats/reg-i386-linux.dat (osabi): Set to GNU/Linux.
2343 * target-descriptions.h (tdesc_osabi, set_tdesc_osabi): Declare.
2344 * target-descriptions.c (struct target_desc) <osabi>: New field.
2345 (tdesc_osabi): New function.
2346 (set_tdesc_osabi): New function.
2347 * xml-tdesc.c: Include osabi.h.
2348 (tdesc_end_osabi): New.
2349 (target_children): Parse "osabi" elements.
2350 * arch-utils.c (gdbarch_info_fill): Try to get the osabi from the
2351 target description if the user didn't override it or it is not
2352 extractable from the bfd. If that still fails, fallback to the
2353 configured in default.
2354 * osabi.h (osabi_from_tdesc_string): Declare.
2355 * osabi.c (osabi_from_tdesc_string): New.
2356 (gdbarch_lookup_osabi): Return GDB_OSABI_UNKNOWN instead of
2359 * NEWS: Mention that target descriptions can now describe the
2362 2009-07-20 Mike Frysinger <vapier@gentoo.org>
2364 * configure.ac (AC_CHECK_FUNCS): Check for pipe.
2365 * config.in, configure: Regenerate.
2366 * tui/tui-io.c (TUI_USE_PIPE_FOR_READLINE): Define if HAVE_PIPE.
2368 2009-07-20 Pedro Alves <pedro@codesourcery.com>
2370 * gnu-nat.c: Include "inf-child.h".
2371 (gnu_mourn_inferior): Use the passed in target_ops
2372 instead of the gnu_ops global.
2373 (gnu_create_inferior): Inline `attach_to_child', use the passed in
2374 target_ops instead of the gnu_ops global.
2375 (gnu_can_run): Delete.
2376 (gnu_attach): Use the passed in target_ops instead of the gnu_ops
2378 (gnu_detach): Ditto.
2379 (gnu_prepare_to_store, gnu_open): Delete.
2380 (gnu_store_registers, gnu_fetch_registers): Delete declarations.
2382 (init_gnu_ops): Delete.
2384 (_initialize_gnu_nat): Don't call init_gnu_ops or add_target here.
2385 * gnu-nat.h (gnu_target): Declare.
2386 * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Make
2388 (_initialize_i386gnu_nat): New.
2390 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
2392 * dwarf2loc.c (find_location_expression): Retrieve beginning and
2393 ending address offsets in location list entries as integers,
2396 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
2398 * infrun.c (wait_for_inferior): Invalidate registers and overlay
2399 cache every time before calling target_wait.
2400 (handle_inferior_event): Make static. Always reset waiton_ptid.
2401 Never call registers_changed.
2402 (prepare_to_wait): Do not invaliate registers or overlay cache
2403 (moved to wait_for_inferior). Do not reset waiton_ptid (moved
2404 to handle_inferior_event).
2405 (fetch_inferior_event): Remove check for always-true condition.
2407 2009-07-20 Thomas Schwinge <tschwinge@gnu.org>
2409 * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Adjust to
2410 2009-02-23 target_ops changes.
2412 2009-07-18 Michael Snyder <msnyder@vmware.com>
2414 * infrun.c (handle_inferior_event): Remove an execution_direction
2415 check in the "check for subroutine calls" test, and add some
2416 additional handling for reverse-stepping through shared libraries.
2418 2009-07-18 Anthony Green <green@moxielogic.com>
2420 * moxie-tdep.c (moxie_analyze_prologue): Take gdbarch as last
2421 parameter instead of frame_info.
2422 (moxie_frame_cache): Call moxie_analyze_prologue with different
2425 2009-07-17 Ulrich Weigand <uweigand@de.ibm.com>
2427 * solib.c (solib_bfd_open): Do not call ops->bfd_open.
2428 (solib_map_sections): Call ops->bfd_open instead of solib_bfd_open.
2429 * solib-frv.c (_initialize_frv_solib): Initialize bfd_open member.
2430 * solib-irix.c (_initialize_irix_solib): Likewise.
2431 * solib-null.c (_initialize_null_solib): Likewise.
2432 * solib-osf.c (_initialize_osf_solib): Likewise.
2433 * solib-pa64.c (_initialize_pa64_solib): Likewise.
2434 * solib-som.c (_initialize_som_solib): Likewise.
2435 * solib-sunos.c (_initialize_sunos_solib): Likewise.
2436 * solib-svr4.c (_initialize_svr4_solib): Likewise.
2437 * solib-target.c (_initialize_solib_target): Likewise.
2439 2009-07-17 Ulrich Weigand <uweigand@de.ibm.com>
2441 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Respect mixed_mode flag.
2443 2009-07-16 Doug Evans <dje@google.com>
2445 * linux-thread.db.c (try_thread_db_load_1): Tweak comment.
2447 2007-07-16 Paul Pluzhnikov <ppluzhnikov@google.com>
2449 * linux-thread-db.c (thread_db_find_new_threads_silently):
2451 (try_thread_db_load_1): Call it.
2453 2009-07-15 Doug Evans <dje@google.com>
2455 Code reorg in preparation for adding comdat types support.
2456 * dwarf2read.c (struct die_reader_specs): New struct.
2457 (locate_pdi_sibling): New arg buffer. All callers updated.
2458 (load_partial_dies, read_partial_die): Ditto.
2459 (read_8_bytes): Change return type to ULONGEST.
2460 (read_comp_unit): Delete arg abfd. All callers updated.
2461 (read_die_and_children_1): Delete args abfd, cu. New arg reader.
2462 All callers updated.
2463 (read_die_and_children, read_die_and_siblings): Ditto.
2464 (read_full_die): Ditto. Move closer to callers.
2465 (skip_one_die): New arg buffer. All callers updated.
2466 (load_full_comp_unit): Change return type to void. All callers
2468 (partial_read_comp_unit_head): New args buffer, buffer_size.
2469 All callers updated.
2470 (process_psymtab_comp_unit): New function, split out from
2471 dwarf2_build_psymtabs_hard.
2472 (dwarf2_build_psymtabs_hard): Call it.
2473 (load_partial_comp_unit): Renamed from load_comp_unit.
2474 All callers updated.
2475 (skip_children): New arg buffer. All callers updated.
2476 (init_cu_die_reader): New function.
2477 (is_ref_attr): New function.
2478 (dwarf2_get_ref_die_offset): Call it.
2479 (alloc_one_comp_unit): New function.
2481 2009-07-14 Stan Shebs <stan@codesourcery.com>
2483 * MAINTAINERS (Global Maintainers): Add Doug Evans.
2485 2009-07-14 Stan Shebs <stan@codesourcery.com>
2487 Conditional tracepoints.
2488 * ax-gdb.h (gen_eval_for_expr): Declare.
2489 * ax-gdb.c (gen_expr): Generate bytecodes for BINOP_EQUAL
2490 and other comparisons.
2491 (gen_eval_for_expr): New function.
2492 (agent_eval_command): New maintenance command.
2493 (_initialize_ax_gdb): Define the command.
2494 * remote.c (struct remote_state): New field cond_tracepoints.
2495 (PACKET_ConditionalTracepoints): New packet config type.
2496 (remote_cond_tracepoint_feature): New function.
2497 (remote_protocol_features): Add ConditionalTracepoints.
2498 (remote_supports_cond_tracepoints): New function.
2499 (_initialize_remote): Add ConditionalTracepoints.
2500 * tracepoint.c (download_tracepoint): Add conditional.
2501 * NEWS: Mention conditional tracepoints.
2503 2009-07-14 Ulrich Weigand <uweigand@de.ibm.com>
2505 * objfiles.c (objfile_relocate): Do not relocate the same
2506 BLOCKVECTOR_MAP address map multiple times.
2508 2009-07-14 Ulrich Weigand <uweigand@de.ibm.com>
2510 * remote.c (process_stop_reply): Access expedited target registers
2513 2009-07-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2515 Fix memory access from signed 32bit inferior registers on 64bit GDB.
2516 * linux-nat.c (linux_xfer_partial <TARGET_OBJECT_MEMORY>): New variable
2517 addr_bit. Mask OFFSET by the ADDR_BIT width.
2519 2009-07-13 Anthony Green <green@moxielogic.com>
2521 * moxie-tdep.c (moxie_gdbarch_init): Call
2522 set_gdbarch_process_record.
2523 (moxie_process_record): New.
2524 (moxie_process_readu): New.
2526 2009-07-12 Michael Snyder <msnyder@vmware.com>
2528 * i386-tdep.c: Add a frame unwinder for function epilogues.
2529 (i386_in_function_epilogue_p): New function.
2530 (i386_epilogue_frame_sniffer): New function.
2531 (i386_epilogue_frame_cache): New function.
2532 (i386_epilogue_frame_this_id): New function.
2533 (i386_epilogue_frame_unwind): New struct frame_unwind.
2534 (i386_gdbarch_init): Hook the new unwinder.
2536 2009-07-11 Hui Zhu <teawater@gmail.com>
2538 * cli/cli-cmds.c (disassemble_command): Add a new modifier /r
2539 to "disassemble" command to print the raw instructions in hex as
2540 well as in symbolic form.
2541 (init_cli_cmds): Ditto.
2542 (print_disassembly): Change "mixed" to "flags" to translate
2543 the behavior of disassemble.
2544 (disassemble_current_function): Ditto.
2545 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
2546 * stack.c (gdb_disassembly_stub): Ditto.
2547 * disasm.c (do_mixed_source_and_assembly): Ditto.
2548 (do_mixed_source_and_assembly): Ditto.
2549 (do_assembly_only): Ditto.
2550 (gdb_disassembly): Ditto.
2551 (dump_insns): print the raw instructions in hex as well as in
2552 symbolic form if DISASSEMBLY_RAW_INSN and flags is true.
2553 * disasm.h (DISASSEMBLY_SOURCE): Include source code with the
2554 assembly if it and flags is true.
2555 (DISASSEMBLY_RAW_INSN): Include the raw instructions in hex with
2556 the assembly if it and flags is true.
2557 (gdb_disassembly): Update extern.
2558 * NEWS: Document disassemble/r support.
2560 2009-07-10 Tom Tromey <tromey@redhat.com>
2562 * dwarf2-frame.c: Include dwarf2.h, not elf/dwarf2.h.
2563 * dwarf2expr.c: Likewise.
2564 * dwarf2loc.c: Likewise.
2565 * dwarf2read.c: Likewise.
2566 * sh-tdep.c: Likewise.
2567 * xtensa-tdep.c: Likewise.
2569 2009-07-10 Jan Kratochvil <jan.kratochvil@redhat.com>
2572 * mi/mi-cmd-var.c (mi_cmd_var_update): Remove variable nv. Move
2573 variables var, rootlist and cr to their local sub-block. Move the
2574 make_cleanup_ui_out_tuple_begin_end, make_cleanup_ui_out_list_begin_end
2575 and do_cleanups calls to the common base block. Remove the zero NV
2578 2009-07-10 Phil Muldoon <pmuldoon@redhat.com>
2580 * python/python-internal.h (apply_varobj_pretty_printer): Update
2582 (python_string_to_target_python_string): Add definition.
2583 * python/python-utils.c (unicode_to_encoded_python_string)
2584 (unicode_to_target_python_string)
2585 (python_string_to_target_python_string): New Functions.
2586 * python/python-prettyprint.c (pretty_print_one_value): Likewise.
2587 (print_string_repr): Refactor to logic to account for PyObject
2589 (apply_varobj_pretty_printer): Likewise.
2590 * python/python-value.c (valpy_string): Parse length keyword. Use
2591 length keyword in LA_GET_STRING.
2592 * varobj.c (value_get_print_value): Refactor logic to account for
2593 PyObject returned strings.
2594 * c-lang.c (c_get_string): If the length parameter is specified,
2595 use that. Return value in characters. Update comments.
2596 * language.h: Update c_get_string prototype comments.
2598 2009-07-09 Doug Evans <dje@google.com>
2600 * i386-tdep.c (i386_displaced_step_fixup): Fix order of arguments
2601 to read_memory_unsigned_integer.
2603 2009-07-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2605 Report error on inaccessible memory.
2606 * cli/cli-dump.c: Include gdbcore.h.
2607 (dump_memory_to_file): Call read_memory instead of target_read_memory.
2609 2009-07-09 Hui Zhu <teawater@gmail.com>
2611 * solib.c (solib_bfd_open): Output a warning if solib's
2612 architecture is not compatible with inferior's architecture.
2614 2009-07-09 Ulrich Weigand <uweigand@de.ibm.com>
2615 Jan Kratochvil <jan.kratochvil@redhat.com>
2617 * target.h (struct target_ops <to_thread_architecture>): Describe it.
2618 (target_thread_architecture): Refer to to_thread_architecture.
2620 2009-07-08 Pierre Muller <muller@ics.u-strasbg.fr>
2622 * cli/cli-cmds.c (init_cli_cmds): Add "inf" alias for "info" command.
2624 2009-07-07 Ulrich Weigand <uweigand@de.ibm.com>
2626 * tui/tui-stack.c (tui_make_status_line): Display PC as ?? if unknown.
2628 2009-07-07 Pierre Muller <muller@ics.u-strasbg.fr>
2630 * breakpoint.c (set_raw_breakpoint): Remove static modifier.
2632 2009-07-07 Tom Tromey <tromey@redhat.com>
2634 * c-lang.c (convert_octal): Only allow 3 octal digits.
2635 (print_wchar): Prefer 3-digit octal form. Fall back to hex if
2637 * c-exp.y (c_parse_escape): Only allow 3 octal digits.
2639 2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
2641 * python/python-value.c (valpy_getitem): Remove incorrect assert.
2643 2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
2645 * python/python-value.c (valpy_getitem): Don't return from TRY_CATCH.
2647 2009-07-07 Sami Wagiaalla <swagiaal@redhat.com>
2649 * cp-support.h (struct using_direct): Rename members inner and
2650 outer to import_src, and import_dest respectively.
2651 * cp-namespace.c (cp_add_using_directive): Update.
2652 (cp_add_using): Update.
2653 (cp_copy_usings): Update.
2654 (cp_lookup_symbol_namespace): Update.
2655 (cp_scan_for_anonymous_namespaces): Update.
2656 * cp-support.c (make_symbol_overload_list_using): Update.
2657 * cp-support.h (cp_add_using_directive, cp_add_using): Rename
2658 arguments from inner and outer to src and dest respectively.
2659 * cp-namespace.c (cp_add_using_directive): Ditto.
2660 (cp_add_using): Ditto.
2662 2009-07-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2664 * mi/mi-cmd-var.c (mi_cmd_var_update): Replace a while loop by for loop.
2665 * varobj.c (varobj_invalidate): Replace a while loop by for loop.
2667 2009-07-07 Vladimir Prus <vladimir@codesourcery.com>
2669 Fix hang in floating varobjs.
2671 * varobj.c (varobj_invalidate): Advance to next
2672 element when processing floating varobj.
2674 2009-07-07 Vladimir Prus <vladimir@codesourcery.com>
2676 * varobj.c: Remove unnecessary include.
2678 2009-07-07 Tristan Gingold <gingold@adacore.com>
2680 * config/i386/darwin.mh (NATDEPFILES): Remove excServer.o.
2681 Remove excServer.c target. Remove _all target.
2682 * darwin.defs: Removed.
2684 2009-07-06 Aleksandar Ristovski <aristovski@qnx.com>
2686 * configure.tgt (i[34567]86-*-nto*): Add build_gdbserver=yes.
2688 2009-07-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2690 * source.c (find_and_open_source): Remove the `objfile' parameter.
2691 Update the function comment.
2692 (open_source_file, symtab_to_fullname, psymtab_to_fullname): Update the
2693 find_and_open_source callers.
2695 2009-07-05 Pedro Alves <pedro@codesourcery.com>
2697 * coff-pe-read.c (read_pe_exported_syms): Recognize
2698 "pe-arm-wince-little" and "pei-arm-wince-little" bfd targets as PE
2701 2009-07-05 Pedro Alves <pedro@codesourcery.com>
2703 * arm-wince-tdep.c (arm_wince_skip_main_prologue): New.
2704 (arm_wince_init_abi): Register it as gdbarch_skip_main_prologue
2707 2009-06-29 Tristan Gingold <gingold@adacore.com>
2709 * i386-darwin-tdep.c (amd64_darwin_thread_state_reg_offset)
2710 (amd64_darwin_thread_state_num_regs)
2711 (amd64_darwin_sigcontext_addr, x86_darwin_init_abi_64): Moved to
2713 (_initialize_i386_darwin_tdep): Remove 64 bits parts.
2714 (darwin_dwarf_signal_frame_p): Make public.
2715 * amd64-darwin-tdep.c: New file with most chunks from
2717 * i386-darwin-tdep.h: Add a prototype for darwin_dwarf_signal_frame_p.
2718 (amd64_darwin_thread_state_reg_offset)
2719 (amd64_darwin_thread_state_num_regs): Moved to amd64-darwin-tdep.h
2720 * amd64-darwin-tdep.h: New file.
2721 * i386-darwin-nat.c: Only includes amd64-nat.h and amd64-darwin-tdep.h
2722 if BFD64 is defined.
2723 (i386_darwin_fetch_inferior_registers): Add #ifdef BFD64/#endif around
2725 (i386_darwin_store_inferior_registers): Ditto.
2726 (darwin_set_sstep): Ditto.
2727 (darwin_complete_target): Ditto.
2728 (amd64_darwin_sstep_at_sigreturn): Ditto.
2729 * configure.tgt: Create a separate entry for x86_64-*-darwin.
2730 Add 64 bits support for i386-*-darwin if --enable-64-bit-bfd.
2731 * Makefile.in (ALLDEPFILES): Add amd64-darwin-tdep.c, darwin-nat.c,
2732 i386-darwin-tdep.c i386-darwin-nat.c
2733 (ALL_64_TARGET_OBS): Add amd64-darwin-tdep.o
2735 2009-07-02 Pedro Alves <pedro@codesourcery.com>
2737 * linux-fork.c (forks_exist_p): Drop unnecessary extern.
2738 (add_fork, linux_fork_killall, linux_fork_mourn_inferior)
2739 (linux_fork_detach): Ditto.
2740 (delete_fork_command): Rename to ...
2741 (delete_checkpoint_command): ... this.
2742 (detach_fork_command): Rename to ...
2743 (detach_checkpoint_command): ... this.
2744 (info_forks_command): Rename to ...
2745 (info_checkpoints_command): ... this.
2746 (_initialize_linux_fork): Remove stale comments. Adjust.
2748 2009-07-02 Pedro Alves <pedro@codesourcery.com>
2750 * linux-nat.c (linux_child_follow_fork): If we're staying attached
2751 to the child process, enable event reporting on it. Don't handle
2752 checkpoints here. Instead, add the child fork to the lwp thread
2753 and inferior lists without clobbering the previous inferior. Let
2754 the thread_db layer learn about a new child process, even if
2755 following the parent.
2756 (linux_nat_switch_fork): Delete lwps of the current inferior only,
2757 instead of clearing the whole list. Use thread_change_ptid to
2758 give the core the illusion the new checkpoint is still the same
2759 inferior. Clear the register cache.
2760 (linux_handle_extended_wait): Handle checkpoints here.
2761 (linux_multi_process): Turn on.
2762 * linux-fork.c (struct fork_info) <pc>: Remove field.
2763 (init_fork_list): Do not delete the checkpoint from the inferior
2764 list (it is not there).
2765 (fork_load_infrun_state): Don't switch inferior_ptid here. Pass
2766 the new checkpoint's ptid to linux_nat_switch_fork.
2767 (fork_save_infrun_state): Make static. Don't stop the pc field of
2768 fork_info, it's gone.
2769 (linux_fork_mourn_inferior): Don't delete the checkpoint from the
2770 inferior list, it's not there.
2771 (linux_fork_detach): Ditto.
2772 (delete_fork_command): Replace mention of fork/checkpoint by
2774 (detach_fork_command): Likewise. Don't delete the checkpoint from
2776 (info_forks_command): Adjust.
2777 (restore_detach_fork): Delete.
2778 (checkpointing_pid): New.
2779 (linux_fork_checkpointing_p): New.
2780 (save_detach_fork): Delete.
2781 (checkpoint_command): Delete temp_detach_fork. Don't remove
2782 breakpoints, that's a nop. Store the pid of the process we're
2783 checkpointing, and use make_cleanup_restore_integer to restore it.
2784 Don't reinsert breakpoints here.
2785 (process_command, fork_command): Delete.
2786 (restart_command): Update comments to only mention checkpoints,
2788 (_initialize_linux_fork): Delete "fork", "process", "info forks"
2790 * linux-fork.h (fork_save_infrun_state, fork_list): Delete
2792 (linux_fork_checkpointing_p): Declare.
2793 * cli/cli-cmds.c (killlist): New.
2794 * cli/cli-cmds.h (killlist): Declare.
2795 * gdbcmd.h (killlist): Declare.
2796 * inferior.c: Include "gdbthread.h".
2797 (detach_inferior_command, kill_inferior_command)
2798 (inferior_command): New.
2799 (info_inferiors_command): Allow specifying a specific inferior id.
2800 (_initialize_inferiors): Register "inferior", "kill inferior" and
2801 "detach inferior" commands.
2802 * infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
2803 * gdbthread.h (any_thread_of_process): Declare.
2804 * thread.c (any_thread_of_process): New.
2806 * NEWS: Mention multi-inferior debugging. Mention 'info
2807 inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
2809 (Removed commands): New section, mentioning that 'info forks',
2810 'fork', 'process', 'delete fork' and 'detach fork' are now gone.
2812 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2814 * gdbarch.sh (current_gdbarch): Remove global variable.
2815 (find_arch_by_info): Remove, inline into ...
2816 (gdbarch_find_by_info): ... this. Remove current_gdbarch swapping.
2817 (deprecated_current_gdbarch_select_hack): Rename to ...
2818 (deprecated_target_gdbarch_select_hack): ... this. Do not set
2819 or access current_gdbarch.
2820 * gdbarch.c, gdbarch.h: Regenerate.
2822 * arch-utils.c (gdbarch_update_p): Update call.
2823 (set_gdbarch_from_file): Likewise.
2825 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2827 * defs.h (extract_signed_integer, extract_unsigned_integer,
2828 extract_long_unsigned_integer, store_signed_integer,
2829 store_unsigned_integer): Add BYTE_ORDER parameter.
2830 * findvar.c (extract_signed_integer, extract_unsigned_integer,
2831 extract_long_unsigned_integer, store_signed_integer,
2832 store_unsigned_integer): Add BYTE_ORDER parameter. Use it
2833 instead of current_gdbarch.
2835 * gdbcore.h (read_memory_integer, safe_read_memory_integer,
2836 read_memory_unsigned_integer, write_memory_signed_integer,
2837 write_memory_unsigned_integer): Add BYTE_ORDER parameter.
2838 * corefile.c (struct captured_read_memory_integer_arguments): Add
2840 (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
2841 struct captured_read_memory_integer_arguments.
2842 (do_captured_read_memory_integer): Pass it to read_memory_integer.
2843 (read_memory_integer): Add BYTE_ORDER parameter. Pass it to
2844 extract_signed_integer.
2845 (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
2846 extract_unsigned_integer.
2847 (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
2848 to store_signed_integer.
2849 (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
2850 to store_unsigned_integer.
2852 * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
2853 * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
2854 Pass it to extract_unsigned_integer.
2857 Update calls to extract_signed_integer, extract_unsigned_integer,
2858 extract_long_unsigned_integer, store_signed_integer,
2859 store_unsigned_integer, read_memory_integer,
2860 read_memory_unsigned_integer, safe_read_memory_integer,
2861 write_memory_signed_integer, write_memory_unsigned_integer, and
2862 get_target_memory_unsigned to pass byte order:
2863 * ada-lang.c (ada_value_binop): Update.
2864 * ada-valprint.c (char_at): Update.
2865 * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
2866 * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
2867 alpha_extract_return_value, alpha_read_insn,
2868 alpha_get_longjmp_target): Update.
2869 * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
2870 * amd64obsd-tdep.c (amd64obsd_supply_uthread,
2871 amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
2872 * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
2873 amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
2874 amd64_displaced_step_fixup): Update.
2875 * arm-linux-tdep.c (arm_linux_sigreturn_init,
2876 arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
2877 * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
2878 arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
2879 arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
2880 arm_return_value): Update.
2881 * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
2882 * auxv.c (default_auxv_parse): Update.
2883 * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
2884 avr_scan_prologue, avr_extract_return_value,
2885 avr_frame_prev_register, avr_push_dummy_call): Update.
2886 * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
2887 bsd_uthread_wait, bsd_uthread_thread_alive,
2888 bsd_uthread_extra_thread_info): Update.
2889 * c-lang.c (c_printstr, print_wchar): Update.
2890 * cp-valprint.c (cp_print_class_member): Update.
2891 * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
2892 cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
2893 cris_extract_return_value, find_step_target, dip_prefix,
2894 sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
2895 move_mem_to_reg_movem_op, get_data_from_address): Update.
2896 * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
2897 * dwarf2-frame.c (execute_cfa_program): Update.
2898 * dwarf2loc.c (find_location_expression): Update.
2899 * dwarf2read.c (dwarf2_const_value): Update.
2900 * expprint.c (print_subexp_standard): Update.
2901 * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
2902 unsigned_address_to_pointer, address_to_signed_pointer,
2903 read_var_value): Update.
2904 * frame.c (frame_unwind_register_signed,
2905 frame_unwind_register_unsigned, get_frame_memory_signed,
2906 get_frame_memory_unsigned): Update.
2907 * frame-unwind.c (frame_unwind_got_constant): Update.
2908 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
2909 frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
2911 * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
2912 frv_extract_return_value, find_func_descr,
2913 frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
2914 * f-valprint.c (f_val_print): Update.
2915 * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
2917 * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
2918 h8300_push_dummy_call, h8300_extract_return_value,
2919 h8300h_extract_return_value, h8300_store_return_value,
2920 h8300h_store_return_value): Update.
2921 * hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
2922 * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
2924 * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
2925 hppa64_hpux_in_solib_call_trampoline,
2926 hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
2927 hppa_hpux_sigtramp_frame_unwind_cache,
2928 hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
2929 hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
2930 hppa32_hpux_search_dummy_call_sequence,
2931 hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
2932 hppa_hpux_unwind_adjust_stub): Update.
2933 * hppa-linux-tdep.c (insns_match_pattern,
2934 hppa_linux_find_global_pointer): Update.
2935 * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
2936 hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
2937 skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
2938 hppa_pseudo_register_read, hppa_frame_prev_register_helper,
2939 hppa_match_insns): Update.
2940 * hpux-thread.c (hpux_thread_fetch_registers): Update.
2941 * i386-tdep.c (i386bsd_sigcontext_addr): Update.
2942 * i386-cygwin-tdep.c (core_process_module_section): Update.
2943 * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
2944 amd64_darwin_sstep_at_sigreturn): Update.
2945 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
2946 amd64_darwin_sigcontext_addr): Likewise.
2947 * i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
2948 * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
2949 * i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
2950 * i386obsd-nat.c (i386obsd_supply_pcb): Update.
2951 * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
2952 i386obsd_trapframe_cache): Update.
2953 * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
2954 i386_analyze_frame_setup, i386_analyze_prologue,
2955 i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
2956 i386_get_longjmp_target, i386_push_dummy_call,
2957 i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
2958 i386_fetch_pointer_argument): Update.
2959 * i387-tdep.c (i387_supply_fsave): Update.
2960 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
2961 * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
2962 examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
2963 ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
2964 ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
2965 ia64_libunwind_frame_prev_register,
2966 ia64_libunwind_sigtramp_frame_this_id,
2967 ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
2968 find_extant_func_descr, find_func_descr,
2969 ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
2970 ia64_unwind_pc): Update.
2971 * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
2972 iq2000_scan_prologue, iq2000_extract_return_value,
2973 iq2000_push_dummy_call): Update.
2974 * irix5nat.c (fill_gregset): Update.
2975 * jv-lang.c (evaluate_subexp_java): Update.
2976 * jv-valprint.c (java_value_print): Update.
2977 * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
2978 lm32_extract_return_value, lm32_store_return_value): Update.
2979 * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
2980 m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
2981 m32c_m16c_pointer_to_address): Update.
2982 * m32r-tdep.c (m32r_store_return_value, decode_prologue,
2983 m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
2985 * m68hc11-tdep.c (m68hc11_pseudo_register_read,
2986 m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
2987 m68hc11_push_dummy_call): Update.
2988 * m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
2989 m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
2991 * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
2992 m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
2993 m68k_get_longjmp_target): Update.
2994 * m88k-tdep.c (m88k_fetch_instruction): Update.
2995 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
2996 mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
2997 * mi/mi-main.c (mi_cmd_data_write_memory): Update.
2998 * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
2999 mips64_linux_get_longjmp_target, mips64_fill_gregset,
3000 mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
3001 * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
3002 * mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
3003 mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
3004 mips_o32_push_dummy_call, mips_o64_push_dummy_call,
3005 mips_single_step_through_delay, mips_skip_pic_trampoline_code,
3006 mips_integer_to_address): Update.
3007 * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
3009 * monitor.c (monitor_supply_register, monitor_write_memory,
3010 monitor_read_memory_single): Update.
3011 * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
3012 moxie_analyze_prologue): Update.
3013 * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
3014 mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
3015 mt_push_dummy_call): Update.
3016 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
3017 read_objc_methlist_method, read_objc_object, read_objc_super,
3018 read_objc_class, find_implementation_from_class): Update.
3019 * ppc64-linux-tdep.c (ppc64_desc_entry_point,
3020 ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
3022 * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
3023 ppcobsd_sigtramp_frame_cache): Update.
3024 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
3025 do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
3026 ppc64_sysv_abi_return_value): Update.
3027 * ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
3028 * procfs.c (procfs_auxv_parse): Update.
3029 * p-valprint.c (pascal_val_print): Update.
3030 * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
3031 regcache_raw_write_signed, regcache_raw_write_unsigned,
3032 regcache_cooked_read_signed, regcache_cooked_read_unsigned,
3033 regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
3034 * remote-m32r-sdi.c (m32r_fetch_register): Update.
3035 * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
3037 * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
3038 rs6000_convert_from_func_ptr_addr, branch_dest,
3039 rs6000_software_single_step): Update.
3040 * rs6000-tdep.c (rs6000_in_function_epilogue_p,
3041 ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
3042 bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
3043 rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
3044 rs6000_frame_cache): Update.
3045 * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
3046 s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
3047 s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
3048 extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
3049 * scm-exp.c (scm_lreadr): Update.
3050 * scm-lang.c (scm_get_field, scm_unpack): Update.
3051 * scm-valprint.c (scm_val_print): Update.
3052 * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
3053 score_fetch_inst): Update.
3054 * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
3055 sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
3056 sh64_pseudo_register_read, sh64_pseudo_register_write,
3057 sh64_frame_prev_register): Update:
3058 * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
3059 sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
3060 sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
3061 * solib-darwin.c (darwin_load_image_infos): Update.
3062 * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
3063 find_canonical_descriptor_in_load_object): Update.
3064 * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
3065 irix_open_symbol_file_object): Update.
3066 * solib-som.c (som_solib_create_inferior_hook, link_map_start,
3067 som_current_sos, som_open_symbol_file_object): Update.
3068 * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
3070 * solib-svr4.c (read_program_header, scan_dyntag_auxv,
3071 solib_svr4_r_ldsomap): Update.
3072 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
3073 * sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
3074 sparc64obsd_collect_uthread): Update.
3075 * sparc64-tdep.c (sparc64_pseudo_register_read,
3076 sparc64_pseudo_register_write, sparc64_supply_gregset,
3077 sparc64_collect_gregset): Update.
3078 * sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
3079 * sparcobsd-tdep.c (sparc32obsd_supply_uthread,
3080 sparc32obsd_collect_uthread): Update.
3081 * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
3082 sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
3083 sparc_collect_rwindow): Update.
3084 * spu-linux-nat.c (parse_spufs_run): Update.
3085 * spu-tdep.c (spu_pseudo_register_read_spu,
3086 spu_pseudo_register_write_spu, spu_pointer_to_address,
3087 spu_analyze_prologue, spu_in_function_epilogue_p,
3088 spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
3089 spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
3090 info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
3091 info_spu_dma_command, info_spu_proxydma_command): Update.
3092 * stack.c (print_frame_nameless_args, frame_info): Update.
3093 * symfile.c (read_target_long_array, simple_read_overlay_table,
3094 simple_read_overlay_region_table): Update.
3095 * target.c (debug_print_register): Update.
3096 * tramp-frame.c (tramp_frame_start): Update.
3097 * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
3098 v850_extract_return_value, v850_store_return_value,
3099 * valarith.c (value_binop, value_bit_index): Update.
3100 * valops.c (value_cast): Update.
3101 * valprint.c (val_print_type_code_int, val_print_string,
3102 read_string): Update.
3103 * value.c (unpack_long, unpack_double, unpack_field_as_long,
3104 modify_field, pack_long): Update.
3105 * vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
3106 vax_skip_prologue): Update.
3107 * xstormy16-tdep.c (xstormy16_push_dummy_call,
3108 xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
3109 xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
3110 xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
3111 * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
3112 xtensa_pseudo_register_write, xtensa_frame_cache,
3113 xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
3116 * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
3117 decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
3118 BYTE_ORDER parameter.
3119 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
3121 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
3122 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
3123 * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
3124 instead of current_gdbarch.
3125 (decimal_to_string, decimal_from_integral, decimal_from_floating,
3126 decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
3127 Pass it to match_endianness.
3128 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
3129 parameters. Pass them to match_endianness.
3130 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
3131 Pass them to match_endianness.
3132 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
3133 Pass them to match_endianness.
3134 * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
3135 BYTE_ORDER_Y output parameters.
3136 (value_binop): Update call to value_args_as_decimal.
3138 Update calls to decimal_to_string, decimal_from_string,
3139 decimal_from_integral, decimal_from_floating, decimal_to_doublest,
3140 decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
3141 to pass/receive byte order:
3142 * c-exp.y (parse_number): Update.
3143 * printcmd.c (printf_command): Update.
3144 * valarith.c (value_args_as_decimal, value_binop, value_logical_not,
3145 value_equal, value_less): Update.
3146 * valops.c (value_cast, value_one): Update.
3147 * valprint.c (print_decimal_floating): Update.
3148 * value.c (unpack_long, unpack_double): Update.
3149 * python/python-value.c (valpy_nonzero): Update.
3152 * ada-valprint.c (char_at): Add BYTE_ORDER parameter.
3153 (printstr): Update calls to char_at.
3154 (ada_val_print_array): Likewise.
3155 * valprint.c (read_string): Add BYTE_ORDER parameter.
3156 (val_print_string): Update call to read_string.
3157 * c-lang.c (c_get_string): Likewise.
3158 * charset.h (target_wide_charset): Add BYTE_ORDER parameter.
3159 * charset.c (target_wide_charset): Add BYTE_ORDER parameter.
3160 Use it instead of current_gdbarch.
3161 * printcmd.c (printf_command): Update calls to target_wide_charset.
3162 * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
3163 Pass to target_wide_charset. Use it instead of current_gdbarch.
3164 (classify_type): Add BYTE_ORDER parameter. Pass to
3165 charset_for_string_type. Allow NULL encoding pointer.
3166 (print_wchar): Add BYTE_ORDER parameter.
3167 (c_emit_char): Update calls to classify_type and print_wchar.
3168 (c_printchar, c_printstr): Likewise.
3171 * gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
3172 * gdbarch.c, gdbarch.h: Regenerate.
3173 * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
3175 * arch-utils.c (generic_in_solib_return_trampoline): Likewise.
3176 * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
3177 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
3178 (rs6000_skip_trampoline_code): Update call.
3180 * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
3181 dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
3182 (alpha_read_insn): Add GDBARCH parameter.
3183 * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
3184 (alpha_register_to_value): Pass architecture to alpha_sts.
3185 (alpha_extract_return_value): Likewise.
3186 (alpha_value_to_register): Pass architecture to alpha_lds.
3187 (alpha_store_return_value): Likewise.
3188 (alpha_read_insn): Add GDBARCH parameter.
3189 (alpha_skip_prologue): Pass architecture to alpha_read_insn.
3190 (alpha_heuristic_proc_start): Likewise.
3191 (alpha_heuristic_frame_unwind_cache): Likewise.
3192 (alpha_next_pc): Likewise.
3193 (alpha_sigtramp_frame_this_id): Pass architecture to
3194 tdep->dynamic_sigtramp_offset callback.
3195 (alpha_sigtramp_frame_sniffer): Pass architecture to
3196 tdep->pc_in_sigtramp callback.
3197 * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
3198 (alphafbsd_sigtramp_offset): Likewise.
3199 * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
3200 parameter. Pass to alpha_read_insn.
3201 (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
3202 alpha_linux_sigtramp_offset_1.
3203 (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
3204 alpha_linux_sigtramp_offset.
3205 (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
3206 and alpha_linux_sigtramp_offset.
3207 * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
3208 (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
3209 alphanbsd_sigtramp_offset.
3210 * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
3211 (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
3213 (alphaobsd_sigcontext_addr): Pass architecture to
3214 alphaobsd_sigtramp_offset.
3215 * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
3218 * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
3219 (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
3220 (amd64_frame_cache): Likewise.
3222 * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
3223 (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
3224 thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
3225 * arm-wince-tdep.c: Include "frame.h".
3227 * avr-tdep.c (EXTRACT_INSN): Remove.
3228 (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
3229 (avr_skip_prologue): Pass architecture to avr_scan_prologue.
3230 (avr_frame_unwind_cache): Likewise.
3232 * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
3233 (find_step_target): Initialize it.
3234 (get_data_from_address): Add BYTE_ORDER parameter.
3235 (bdap_prefix): Pass byte order to get_data_from_address.
3236 (handle_prefix_assign_mode_for_aritm_op): Likewise.
3237 (three_operand_add_sub_cmp_and_or_op): Likewise.
3238 (handle_inc_and_index_mode_for_aritm_op): Likewise.
3240 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
3241 (frv_linux_sigcontext_reg_addr): Pass architecture to
3242 frv_linux_pc_in_sigtramp.
3243 (frv_linux_sigtramp_frame_sniffer): Likewise.
3245 * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
3246 (h8300_analyze_prologue): Add GDBARCH parameter. Pass to
3247 h8300_is_argument_spill.
3248 (h8300_frame_cache, h8300_skip_prologue): Pass architecture
3249 to h8300_analyze_prologue.
3251 * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
3252 in_solib_call_trampoline callback.
3253 (hppa_in_solib_call_trampoline): Add GDBARCH parameter.
3254 * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
3256 (hppa64_push_dummy_call): Pass architecture to
3257 hppa64_convert_code_addr_to_fptr.
3258 (hppa_match_insns): Add GDBARCH parameter.
3259 (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
3261 (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
3262 (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
3263 hppa_match_insns_relaxed.
3264 (hppa_stub_unwind_sniffer): Pass architecture to
3265 tdep->in_solib_call_trampoline callback.
3266 * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
3267 (hppa32_hpux_search_dummy_call_sequence): Pass architecture to
3268 hppa_hpux_search_pattern.
3269 * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
3270 (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
3271 Pass to insns_match_pattern.
3272 (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
3273 hppa_linux_sigtramp_find_sigcontext.
3274 (hppa_linux_sigtramp_frame_sniffer): Likewise.
3275 (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
3276 (hppa64_hpux_in_solib_call_trampoline): Likewise.
3278 * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
3279 (i386_analyze_frame_setup): Add GDBARCH parameter.
3280 (i386_analyze_prologue): Add GDBARCH parameter. Pass to
3281 i386_follow_jump and i386_analyze_frame_setup.
3282 (i386_skip_prologue): Pass architecture to i386_analyze_prologue
3283 and i386_follow_jump.
3284 (i386_frame_cache): Pass architecture to i386_analyze_prologue.
3285 (i386_pe_skip_trampoline_code): Add FRAME parameter.
3286 * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
3287 * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
3288 frame to i386_pe_skip_trampoline_code.
3290 * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
3291 to sigcontext_register_address callback.
3292 * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
3293 (ia64_find_unwind_table): Pass architecture to
3294 ia64_find_global_pointer.
3295 (find_extant_func_descr): Add GDBARCH parameter.
3296 (find_func_descr): Pass architecture to find_extant_func_descr
3297 and ia64_find_global_pointer.
3298 (ia64_sigtramp_frame_init_saved_regs): Pass architecture to
3299 tdep->sigcontext_register_address callback.
3300 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
3303 * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
3304 (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
3306 * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
3307 (lm32_skip_prologue, lm32_frame_cache): Pass architecture to
3308 lm32_analyze_prologue.
3310 * m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
3311 (m32r_skip_prologue): Pass architecture to decode_prologue.
3313 * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
3314 (m68hc11_scan_prologue): Pass architecture to
3315 m68hc11_analyze_instruction.
3317 * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
3318 (m68k_analyze_prologue): Pass architecture to
3319 m68k_analyze_frame_setup.
3321 * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
3322 (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
3323 to m88k_fetch_instruction.
3324 (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
3325 (m88k_frame_cache): Likewise.
3327 * mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
3328 (mep_analyze_prologue): Pass architecture to mep_get_insn.
3330 * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
3331 (mips32_next_pc): Pass architecture to mips_fetch_instruction.
3332 (deal_with_atomic_sequence): Likewise.
3333 (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
3334 (mips16_scan_prologue): Likewise.
3335 (mips32_scan_prologue): Likewise.
3336 (mips16_in_function_epilogue_p): Likewise.
3337 (mips32_in_function_epilogue_p): Likewise.
3338 (mips_about_to_return): Likewise.
3339 (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
3340 (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
3341 (mips_skip_prologue): Pass architecture to mips16_scan_prologue
3342 and mips32_scan_prologue.
3343 (mips_in_function_epilogue_p): Pass architecture to
3344 mips16_in_function_epilogue_p and
3345 mips32_in_function_epilogue_p.
3346 (heuristic_proc_start): Pass architecture to mips_fetch_instruction
3347 and mips_about_to_return.
3348 (mips_skip_mips16_trampoline_code): Pass architecture to
3349 mips_fetch_instruction.
3350 (fetch_mips_16): Add GDBARCH parameter.
3351 (mips16_next_pc): Pass architecture to fetch_mips_16.
3352 (extended_mips16_next_pc): Pass architecture to unpack_mips16 and
3355 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
3356 read_objc_methlist_method, read_objc_object, read_objc_super,
3357 read_objc_class): Add GDBARCH parameter.
3358 (find_implementation_from_class): Add GDBARCH parameter, pass
3359 to read_objc_class, read_objc_methlist_nmethods, and
3360 read_objc_methlist_method.
3361 (find_implementation): Add GDBARCH parameter, pass to
3362 read_objc_object and find_implementation_from_class.
3363 (resolve_msgsend, resolve_msgsend_stret): Pass architecture
3364 to find_implementation.
3365 (resolve_msgsend_super, resolve_msgsend_super_stret): Pass
3366 architecture to read_objc_super and find_implementation_from_class.
3368 * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
3369 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
3370 ppc64_standard_linkage3_target): Pass architecture to
3371 ppc64_desc_entry_point.
3372 * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
3373 (skip_prologue): Pass byte order to bl_to_blrl_insn_p.
3374 (rs6000_fetch_instruction): Add GDBARCH parameter.
3375 (rs6000_skip_stack_check): Add GDBARCH parameter, pass to
3376 rs6000_fetch_instruction.
3377 (skip_prologue): Pass architecture to rs6000_fetch_instruction.
3379 * remote-mips.c (mips_store_word): Return old_contents as host
3380 integer value instead of target bytes.
3382 * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
3383 (s390_analyze_prologue): Initialize it.
3384 (extend_simple_arg): Add GDBARCH parameter.
3385 (s390_push_dummy_call): Pass architecture to extend_simple_arg.
3387 * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
3388 * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
3389 (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
3390 * scm-valprint.c (scm_scmval_print): Likewise.
3391 (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
3394 * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
3395 (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
3396 look_for_args_moves.
3397 (sh64_skip_prologue): Pass architecture to
3398 sh64_skip_prologue_hard_way.
3399 * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
3400 (sh_skip_prologue): Pass architecture to sh_analyze_prologue.
3401 (sh_frame_cache): Likewise.
3403 * solib-irix.c (extract_mips_address): Add GDBARCH parameter.
3404 (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
3405 Pass architecture to extract_mips_address.
3407 * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
3408 * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
3409 (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
3410 to sparc_fetch_wcookie.
3411 (sparc32_frame_prev_register): Likewise.
3412 * sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
3413 * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
3414 * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
3416 * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
3417 (spu_skip_prologue): Pass architecture to spu_analyze_prologue.
3418 (spu_virtual_frame_pointer): Likewise.
3419 (spu_frame_unwind_cache): Likewise.
3420 (info_spu_mailbox_list): Add BYTE_ORER parameter.
3421 (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
3422 (info_spu_dma_cmdlist): Add BYTE_ORER parameter.
3423 (info_spu_dma_command, info_spu_proxydma_command): Pass byte order
3424 to info_spu_dma_cmdlist.
3426 * symfile.c (read_target_long_array): Add GDBARCH parameter.
3427 (simple_read_overlay_table, simple_read_overlay_region_table,
3428 simple_overlay_update_1): Pass architecture to read_target_long_array.
3430 * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
3431 (v850_frame_cache): Pass architecture to v850_analyze_prologue.
3433 * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
3435 (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
3436 to xstormy16_analyze_prologue.
3437 (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
3438 (xstormy16_find_jmp_table_entry): Likewise.
3439 (xstormy16_skip_trampoline_code): Pass architecture to
3440 xstormy16_resolve_jmp_table_entry.
3441 (xstormy16_pointer_to_address): Likewise.
3442 (xstormy16_address_to_pointer): Pass architecture to
3443 xstormy16_find_jmp_table_entry.
3445 * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
3446 (call0_analyze_prologue): Add GDBARCH parameter, pass to
3448 (call0_frame_cache): Pass architecture to call0_analyze_prologue.
3449 (xtensa_skip_prologue): Likewise.
3451 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3453 * defs.h (strlen_paddr, paddr, paddr_nz): Remove.
3454 (paddress): Add GDBARCH parameter.
3455 * utils.c (strlen_paddr, paddr, paddr_nz): Remove.
3456 (paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
3457 * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
3458 * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
3459 use it instead of current_gdbarch.
3461 Update calls to ui_out_field_core_addr to pass architecture:
3462 * ada-lang.c (print_one_exception): Update.
3463 * breakpoint.c (print_one_breakpoint_location,
3464 print_one_exception_catchpoint): Update.
3465 * disasm.c (dump_insns): Update.
3466 * darwin-nat-info.c (darwin_debug_regions_recurse): Update.
3467 * mi/mi-main.c (mi_cmd_data_read_memory): Update.
3468 * mi/mi-symbol-cmds.c: Include "objfiles.h".
3469 (mi_cmd_symbol_list_lines): Update.
3470 * stack.c (print_frame_info, print_frame): Update.
3472 Update callers of paddress to pass architecture:
3473 * ada-tasks.c (info_task): Update.
3474 * ada-valprint.c (ada_val_print_1): Update.
3475 * annotate.c (annotate_source, annotate_frame_begin): Update.
3476 * breakpoint.c (insert_bp_location, describe_other_breakpoints,
3478 * cli/cli-cmds.c (edit_command, list_command, print_disassembly):
3480 * corefile.c (memory_error): Update.
3481 * c-valprint.c (print_function_pointer_address, c_val_print): Update.
3482 * disasm.c (dis_asm_print_address): Update.
3483 * exec.c (print_section_info): Update.
3484 * f-valprint.c (f_val_print): Update.
3485 * infcmd.c: Include "arch-utils.h".
3486 (jump_command, program_info): Update.
3487 * linux-fork.c: Include "arch-utils.h".
3488 (info_forks_command): Update.
3489 * m2-valprint.c (print_function_pointer_address,
3490 print_unpacked_pointer, print_variable_at_address,
3491 m2_val_print): Update.
3492 * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
3494 * printcmd.c (print_address, print_address_demangle, address_info):
3496 * p-valprint.c (pascal_val_print): Update.
3497 * source.c: Include "arch-utils.h".
3498 (line_info): Update.
3499 * stack.c (frame_info, print_block_frame_labels): Update.
3500 * symfile.c (add_symbol_file_command, list_overlays_command): Update.
3501 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
3502 print_symbol, print_partial_symbols, maintenance_info_psymtabs,
3503 maintenance_check_symtabs): Update.
3504 * symtab.c (find_pc_sect_symtab): Update.
3505 * target.c (deprecated_debug_xfer_memory): Update.
3506 * tracepoint.c (scope_info): Update.
3507 * tui/tui-stack.c (tui_make_status_line): Update.
3508 * valprint.c (val_print_string): Update.
3510 Update callers of paddr_nz to use paddress instead (keeping
3511 user-visible output identical):
3512 * alpha-tdep.c (alpha_heuristic_proc_start): Update.
3513 * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
3514 amd64_displaced_step_fixup): Update.
3515 * arch-utils.c (simple_displaced_step_copy_insn): Update.
3516 * auxv.c (fprint_target_auxv): Update.
3517 * breakpoint.c (insert_single_step_breakpoint): Update.
3518 * buildsym.c (finish_block): Update.
3519 * cli/cli-dump.c (restore_section_callback): Update.
3520 * fbsd-nat.c (fbsd_find_memory_regions): Update.
3521 * frame.c (frame_unwind_register_value): Update.
3522 * gcore.c (gcore_create_callback): Update.
3523 * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
3524 * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
3525 i386_record_lea_modrm_addr, i386_record_lea_modrm,
3526 i386_process_record): Update.
3527 * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
3528 ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
3529 ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
3530 * infrun.c (displaced_step_prepare, displaced_step_fixup,
3531 handle_inferior_event, insert_step_resume_breakpoint_at_sal,
3532 insert_longjmp_resume_breakpoint): Update.
3533 * linux-nat.c (linux_nat_find_memory_regions): Update.
3534 * linux-record.c (record_linux_system_call): Update.
3535 * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
3536 mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
3537 mips_o64_push_dummy_call): Update.
3538 * monitor.c (monitor_error, monitor_remove_breakpoint): Update.
3539 * record.c (record_arch_list_add_mem, record_wait,
3540 record_xfer_partial): Update.
3541 * remote-mips.c (mips_fetch_word, mips_check_lsi_error,
3542 mips_common_breakpoint): Update.
3543 * remote-sim.c (gdbsim_xfer_inferior_memory): Update.
3544 * rs6000-tdep.c (ppc_displaced_step_fixup): Update.
3545 * solib-som.c (som_current_sos): Update.
3546 * symfile.c (load_progress, generic_load): Update.
3547 * symfile-mem.c (add_vsyscall_page): Update.
3548 * valops.c (value_fetch_lazy): Update.
3549 * windows-tdep.c (windows_xfer_shared_library): Update.
3551 Update callers of paddr_nz to use paddress instead (changing
3552 user-visible output to make it more correct):
3553 * dwarf2loc.c (locexpr_describe_location): Update.
3554 * ia64-tdep.c (ia64_memory_insert_breakpoint,
3555 ia64_memory_remove_breakpoint): Update.
3556 * jv-valprint.c (java_value_print): Update.
3557 * m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
3558 * monitor.c (monitor_read_memory): Update.
3560 Update callers of paddr to use paddress instead (changing
3561 user-visible output to make it more correct):
3562 * arm-tdep.c (arm_push_dummy_call): Update.
3563 * breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
3564 create_breakpoint): Update.
3565 * darwin-nat-info.c (darwin_debug_regions): Update.
3566 * dcache.c (dcache_info): Update.
3567 * dsrec.c (load_srec, make_srec): Update.
3568 * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
3569 dwarf2_frame_cache): Update.
3570 * gcore.c (gcore_copy_callback): Update.
3571 * gnu-nat.c (gnu_xfer_memory): Update.
3572 * mips-linux-nat.c (mips_show_dr): Update.
3573 * monitor.c (monitor_write_memory, monitor_insert_breakpoint,
3574 monitor_remove_breakpoint): Update.
3575 * remote.c (compare_sections_command): Update.
3576 * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
3577 m32r_remove_breakpoint, m32r_insert_watchpoint,
3578 m32r_remove_watchpoint): Update.
3579 * sol-thread.c (info_cb): Update.
3580 * symfile.c (load_progress): Update.
3582 Update callers of paddress or paddr_nz to use hex_string instead
3583 (changes output of internal/error/debug messages only):
3584 * dwarf2read.c (dump_die_shallow): Update.
3585 * frame.c (fprint_field, fprint_frame, frame_pc_unwind,
3586 get_frame_func, create_new_frame): Update.
3587 * hppa-tdep.c (find_unwind_entry, unwind_command): Update.
3588 * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
3589 ia64_get_dyn_info_list): Update.
3590 * maint.c (maintenance_translate_address): Update.
3591 * mi/mi-cmd-var.c (mi_cmd_var_create): Update.
3592 * target.c (target_flash_erase): Update.
3594 Update callers of paddr/paddr_nz to use phex/phex_nz instead,
3595 using an appropriate address size. Remove use of strlen_paddr.
3596 * exec.c (exec_files_info): Update.
3597 * i386-nat.c (i386_show_dr): Update.
3598 * remote.c (remote_flash_erase): Update.
3599 * m32r-rom.c (m32r_load_section): Update.
3600 * monitor.c (monitor_vsprintf, monitor_store_register): Update.
3601 * remote.c (remote_check_symbols, remote_search_memory): Update.
3602 * remote-mips.c (mips_request, mips_common_breakpoint): Update.
3603 * scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
3604 * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
3605 * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
3606 sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
3607 sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
3608 sh_dsp_show_regs): Update.
3609 * xcoffsolib.c (sharedlibrary_command): Update.
3612 * maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
3613 Use hex_string_custom instead of paddr.
3614 (print_bfd_section_info): Pass address size.
3615 (print_objfile_section_info): Likewise.
3617 * annotate.h (annotate_source): Add GDBARCH parameter.
3618 (annotate_frame_begin): Likewise.
3619 * annotate.c (annotate_source): Add GDBARCH parameter.
3620 (annotate_frame_begin): Likewise.
3621 * source.c (identify_source_line): Update call to annotate_source.
3622 * stack.c (print_frame_info, print_frame): Update call to
3623 annotate_frame_begin.
3625 * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
3626 (create_breakpoint, create_ada_exception_breakpoint): Update call.
3628 * stack.c (print_block_frame_labels): Add GDBARCH parameter.
3629 (print_frame_label_vars): Update call.
3631 * symmisc.c (print_partial_symbols): Add GDBARCH parameter.
3632 (dump_psymtab): Update call to print_partial_symbols.
3633 (struct print_symbol_args): Add GDBARCH member.
3634 (dump_symtab_1): Set print_symbol_args architecture member.
3635 (print_symbol): Use it.
3637 * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
3639 * windows-tdep.c (windows_xfer_shared_library): Likewise.
3640 * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
3641 (core_process_module_section): Pass architecture from cpms_data to
3642 windows_xfer_shared_library.
3643 (windows_core_xfer_shared_libraries): Initialize cmps_data
3644 architecture member.
3645 * windows-nat.c (windows_xfer_shared_libraries): Pass architecture
3646 to windows_xfer_shared_library.
3648 * defs.h (print_address): Add GDBARCH parameter.
3649 * printcmd.c (print_address): Add GDBARCH parameter.
3650 (print_scalar_formatted, do_examine): Update call.
3651 * findcmd.c (find_command): Update call.
3652 * tracepoint.c: Include "arch-utils.h".
3653 (trace_find_line_command): Update call.
3654 * tui/tui-disasm.c (tui_disassemble): Update call.
3656 * value.h (print_address_demangle): Add GDBARCH parameter.
3657 * printcmd.c (print_address_demangle): Add GDBARCH parameter.
3658 * c-valprint.c (print_function_pointer_address, c_val_print):
3660 * f-valprint.c (f_val_print): Update call.
3661 * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
3662 * jv-valprint.c (java_val_print): Update call.
3663 * m2-valprint.c (print_function_pointer_address, m2_val_print):
3665 * p-valprint.c (pascal_val_print): Update call.
3667 * disasm.c (gdb_disassemble_info): Install architecture into
3668 di.application_data field.
3670 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3672 * disasm.h (gdb_disassembly): Add GDBARCH parameter.
3673 (gdb_print_insn): Likewise.
3674 * disasm.c (dump_insns): Add GDBARCH parameter. Use it instead
3676 (do_mixed_source_and_assembly): Add GDBARCH parameter. Pass to
3678 (do_assembly_only): Likewise.
3679 (gdb_disassembly): Add GDBARCH parameter. Use it instead of
3680 current_gdbarch. Pass to subroutines.
3681 (gdb_print_insn): Add GDBARCH parameter. Use it instead of
3684 * stack.c (struct gdb_disassembly_stub_args): Add GDBARCH member.
3685 (gdb_disassembly_stub): Pass architecture to gdb_disassembly.
3686 (do_gdb_disassembly): Add GDBARCH argument. Store into args.
3687 (print_frame_info): Pass architecture to do_gdb_disassembly.
3689 * printcmd.c (print_formatted): Pass architecture to gdb_print_insn.
3691 * mi/mi-cmd-disas.c: Include "arch-utils.h"
3692 (mi_cmd_disassemble): Pass architecture to gdb_disassembly.
3694 * cli/cli-cmds.c: Include "arch-utils.h".
3695 (print_disassembly): Add GDBARCH parameter. Pass to gdb_disassembly
3696 and tui_show_assembly.
3697 (disassemble_current_function): Pass architecture to
3698 tui_get_low_disassembly_address and print_disassembly.
3699 (disassemble_command): Pass architecture to
3700 tui_get_low_disassembly_address and print_disassembly.
3702 * tui/tui.c (tui_show_assembly): Add GDBARCH parameter. Pass to
3703 tui_update_source_windows_with_addr.
3705 * tui/tui-data.h (struct tui_locator_element): Add GDBARCH member.
3706 (struct tui_source_info): Likewise.
3707 * tui/tui-data.c (tui_clear_win_detail): Clear source_info.gdbarch.
3709 * tui/tui-disasm.c (tui_disassemble): Add GDBARCH parameter.
3710 Pass to gdb_print_insn.
3711 (tui_find_disassembly_address): Add GDBARCH parameter. Pass to
3713 (tui_set_disassem_content): Add GDBARCH parameter. Install into
3714 source_info.gdbarch. Pass to tui_disassemble.
3715 (tui_show_disassem): Add GDBARCH parameter. Pass to
3716 tui_update_source_window.
3717 (tui_show_disassem_and_update_source): Add GDBARCH parameter. Pass to
3718 tui_show_disassem and tui_update_source_window.
3720 (tui_get_begin_asm_address): Return locator architecture in addition
3721 to locator PC value.
3723 (tui_get_low_disassembly_address): Add GDBARCH parameter. Pass to
3724 tui_get_low_disassembly_address.
3726 (tui_vertical_disassem_scroll): Pass architecture to subroutines.
3728 * tui/tui-disasm.h (tui_set_disassem_content): Add GDBARCH parameter.
3729 (tui_show_disassem): Likewise.
3730 (tui_show_disassem_and_update_source): Likewise.
3731 (tui_get_begin_asm_address): Return architecture and PC value.
3733 * tui/tui.h (tui_get_low_disassembly_address): Add GDBARCH parameter.
3734 (tui_show_assembly): Add GDBARCH parameter.
3736 * tui/tui-layout.c (extract_display_start_addr): Return current window
3737 architecture in addition to current PC value.
3739 (tui_set_layout): Update calls to tui_get_low_disassembly_address and
3740 extract_display_start_addr. Pass architecture to
3741 tui_update_source_windows_with_addr.
3743 * tui/tui-source.c: Include "objfiles.h".
3744 (tui_set_source_content): Initialize window architecture.
3745 (tui_show_symtab_source): Add GDBARCH parameter. Pass to
3746 tui_update_source_window_as_is
3748 * tui/tui-source.h (tui_show_symtab_source): Add GDBARCH parameter.
3750 * tui/tui-stack.c (tui_set_locator_info): Add GDBARCH parameter.
3751 Install locator architecture.
3752 (tui_set_locator_filename): Update call.
3753 (tui_show_frame_info): Pass architecture to tui_set_locator_info
3756 * tui/tui-win.c (make_visible_with_new_height): Pass architecture
3757 to tui_update_source_window.
3759 * tui/tui-winsource.c: Include "objfiles.h".
3760 (tui_display_main): Update call to tui_get_begin_asm_address.
3761 Pass architecture to tui_update_source_windows_with_addr.
3762 (tui_update_source_window): Add GDBARCH parameter. Pass to
3763 tui_update_source_window_as_is.
3764 (tui_update_source_window_as_is): Add GDBARCH parameter.
3765 Pass to tui_set_disassem_content.
3766 (tui_update_source_windows_with_addr): Add GDBARCH parameter.
3767 Pass to subroutines.
3768 (tui_update_source_windows_with_line): Pass objfile architecture
3770 (tui_horizontal_source_scroll): Pass architecture to
3771 tui_update_source_window_as_is.
3773 * tui/tui-winsource.h (tui_update_source_window): Add GDBARCH
3775 (tui_update_source_window_as_is): Likewise.
3776 (tui_update_source_windows_with_addr): Likewise.
3778 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3780 * breakpoint.h (struct breakpoint): New member GDBARCH.
3781 * breakpoint.c: Include "arch-utils.h".
3782 (set_raw_breakpoint_without_location): Add GDBARCH parameter.
3783 Use it to set breakpoint architecture.
3784 (set_raw_breakpoint): Add GDBARCH parameter.
3785 (create_internal_breakpoint): Likewise.
3786 (create_catchpoint): Likewise.
3787 (create_fork_vfork_event_catchpoint): Likewise.
3788 (create_breakpoint): Likewise.
3789 (create_breakpoints): Likewise.
3790 (break_command_really): Likewise.
3791 (create_ada_exception_breakpoint): Likewise.
3792 Update local callers to pass architecture:
3793 (create_internal_breakpoint): Update.
3794 (create_overlay_event_breakpoint): Update.
3795 (create_longjmp_master_breakpoint): Update.
3796 (create_thread_event_breakpoint): Update.
3797 (create_solib_event_breakpoint): Update.
3798 (create_catchpoint): Update.
3799 (create_fork_vfork_event_catchpoint): Update.
3800 (set_momentary_breakpoint): Update.
3801 (clone_momentary_breakpoint): Update.
3802 (create_breakpoint): Update.
3803 (create_breakpoints): Update.
3804 (break_command_really): Update.
3805 (break_command_1): Update.
3806 (set_breakpoint): Update.
3807 (watch_command_1): Update.
3808 (catch_fork_command_1): Update.
3809 (catch_exec_commnd_1): Update.
3810 (handle_gnu_v3_exceptions): Update.
3811 (create_ada_exception_breakpoint): Update.
3812 (catch_ada_exception_command): Update.
3813 (catch_assert_command): Update.
3814 (trace_command): Update.
3816 * breakpoint.h (struct bp_location): New member GDBARCH.
3817 * breakpoint.c (get_sal_arch): New function.
3818 (set_raw_breakpoint): Set location architecture.
3819 (add_location_to_breakpoint): Likewise.
3820 (clone_momentary_breakpoint): Likewise.
3821 (watch_command_1): Likewise.
3822 (update_watchpoint): Likewise.
3823 (bp_loc_is_permanent): Use location architecture instead of
3825 (adjust_breakpoint_address): Add GDBARCH parameter; use it
3826 instead of current_gdbarch.
3827 Update callers of adjust_breakpoint_address to pass
3828 breakpoint location architecture:
3829 (set_raw_breakpoint): Update.
3830 (watch_command_1): Update.
3832 * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
3834 (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
3835 (encode_actions): Pass tracepoint architecture to add_local_symbols
3836 (encode_actions): Use tracepoint architecture instead of
3837 current_gdbarch. Pass it to add_local_symbols and collect_symbol.
3839 * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
3840 of print_one callback with last_loc.
3841 * breakpoint.c (print_one_breakpoint_location): Replace last_addr
3842 parameter with last_loc.
3843 (print_one_breakpoint): Likewise.
3844 (do_captured_breakpoint_query): Update call.
3845 (breakpoint_1): Pass last_loc instead of last_addr to
3846 print_one_breakpoint. Pass last location architecture instead of
3847 current_gdbarch to set_next_address.
3848 Update all implementations of the print_one callback:
3849 * breakpoint.c (print_one_catch_fork): Update.
3850 (print_one_catch_vfork): Update.
3851 (print_one_catch_exec): Update.
3852 (print_one_exception_catchpoint): Update.
3853 * ada-lang.c (print_one_exception): Update.
3854 (print_one_catch_exception): Update.
3855 (print_one_catch_exception_unhandled): Update.
3856 (print_one_catch_assert): Update.
3858 * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
3859 parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
3860 (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
3861 to print_one_breakpoint_location.
3862 (breakpoint_address_bits): New function.
3863 (do_captured_breakpoint_query): Compute number of address bits to print
3864 and pass it to print_one_breakpoint.
3865 (breakpoint_1): Likewise. Use it instead of current_gdbarch.
3867 * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
3868 * breakpoint.c (create_thread_event_breakpoint): Likewise.
3869 Update callers to create_thread_event_breakpoint:
3870 * aix-thread.c (pd_enable): Update.
3871 * linux-thread-db.c (enable_thread_event): Update.
3873 * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
3874 * breakpoint.c (create_solib_event_breakpoint): Likewise.
3875 Update callers to create_solib_event_breakpoint:
3876 * solib-frv.c (enable_break, enable_break2): Update.
3877 * solib-pa64.c (pa64_solib_create_inferior_hook): Update.
3878 * solib-som.c (som_solib_create_inferior_hook): Update.
3879 * solib-darwin.c (darwin_solib_create_inferior_hook): Update.
3880 * solib-svr4.c (enable_break): Update.
3882 * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
3883 * breakpoint.c (insert_single_step_breakpoint): Likewise.
3884 Update callers to insert_single_step_breakpoint:
3885 * alpha-tdep.c (alpha_software_single_step): Update.
3886 * arm-linux-tdep.c (arm_linux_software_single_step): Update.
3887 * arm-tdep.c (arm_software_single_step): Update.
3888 * cris-tdep.c (cris_software_single_step): Update.
3889 * rs6000-aix-tdep.c (rs6000_software_single_step): Update.
3890 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
3891 * sparc-tdep.c (sparc_software_single_step): Update.
3892 * spu-tdep.c (spu_software_single_step): Update.
3893 * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
3894 Pass it to insert_single_step_breakpoint.
3895 (mips_software_single_step): Pass architecture to
3896 deal_with_atomic_sequence and insert_single_step_breakpoint.
3898 * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
3899 (deprecated_remove_raw_breakpoint): Likewise.
3900 * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
3901 (deprecated_remove_raw_breakpoint): Likewise.
3902 Update callers to deprecated_insert_raw_breakpoint and
3903 deprecated_remove_raw_breakpoint:
3904 * breakpoint.c (single_step_gdbarch): New static variable.
3905 (insert_single_step_breakpoint): Pass GDBARCH parameter to
3906 deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
3907 (remove_single_step_breakpoints): Pass architecture stored in
3908 single_step_gdbarch to deprecated_remove_raw_breakpoint.
3909 * rs6000-nat.c (exec_one_dummy_insn): Update.
3910 * solib-irix.c (enable_break, disable_break): Update.
3911 * procfs.c (procfs_mourn_inferior): Update.
3912 (remove_dbx_link_breakpoint): Update.
3914 * breakpoint.h (set_breakpoint): Add GDBARCH parameter.
3915 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
3916 * breakpoint.c (set_breakpoint): Add GDBARCH parameter.
3917 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
3918 Update callers to set_breakpoint, set_momentary_breakpoint and
3919 set_momentary_breakpoint_at_pc:
3920 * breakpoint.c (set_momentary_breakpoint_at_pc): Update.
3921 (until_break_command): Update.
3922 * infcall.c (call_function_by_hand): Update.
3923 * infcmd.c (finish_backward, finish_forward): Update.
3924 * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
3925 parameter. Pass it to set_momentary_breakpoint.
3926 (insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
3927 Pass it to set_momentary_breakpoint_at_pc.
3928 (handle_inferior_event): Update.
3929 (insert_step_resume_breakpoint_at_frame): Update.
3930 (insert_step_resume_breakpoint_at_caller): Update..
3931 * mi/mi-cmd-break.c: Include "arch-utils.h".
3932 (mi_cmd_break_insert): Update.
3934 * target.h (struct target_ops): Add GDBARCH parameter to
3935 to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
3936 and to_remove_hw_breakpoint members.
3937 (target_insert_breakpoint, target_remove_breakpoint,
3938 target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
3939 parameter, pass to target routine.
3940 (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
3942 * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
3943 debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
3944 GDBARCH parameter, pass to target routine.
3945 (update_current_target): Update function signature.
3946 * breakpoint.c (insert_bp_location, remove_breakpoint,
3947 deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
3948 Pass architecture to target_ routines.
3949 Update all implementations of the target breakpoint routines to take
3950 GDBARCH parameter and use it instead of GDBARCH as appropriate:
3951 * corelow.c (ignore): Update.
3952 * exec.c (ignore): Update.
3953 * mem-break.c (memory_insert_breakpoint): Update.
3954 (memory_remove_breakpoint): Update.
3955 * monitor.c (monitor_insert_breakpoint): Update.
3956 (monitor_remove_breakpoint): Update.
3957 * record.c (record_insert_breakpoint): Update.
3958 (record_beneath_to_insert_breakpoint): Update.
3959 (record_remove_breakpoint): Update.
3960 (record_beneath_to_remove_breakpoint): Update.
3961 * remote.c (remote_insert_breakpoint): Update.
3962 (remote_remove_breakpoint): Update.
3963 (remote_insert_hw_breakpoint): Update.
3964 (remote_remove_hw_breakpoint): Update.
3965 * remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
3966 (m32r_remove_breakpoint): Update.
3967 * remote-mips.c (mips_insert_breakpoint): Update.
3968 (mips_remove_breakpoint): Update.
3969 * i386-nat.c (i386_insert_hw_breakpoint): Update.
3970 (i386_remove_hw_breakpoint): Update.
3971 * nto-procfs.c (procfs_insert_breakpoint): Update.
3972 (procfs_remove_breakpoint): Update.
3973 (procfs_insert_hw_breakpoint): Update.
3974 (procfs_remove_hw_breakpoint): Update.
3976 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3978 * frame.h (frame_unwind_arch): New.
3979 (frame_unwind_caller_arch): Likewise.
3980 * frame-unwind.h (frame_prev_arch_ftype): New type.
3981 (struct frame_unwind): New member prev_arch.
3982 * frame.c (struct frame_info): New member prev_arch.
3983 (frame_unwind_arch): New function.
3984 (frame_unwind_caller_arch): Likewise..
3985 (get_frame_arch): Reimplement in terms of frame_unwind_arch.
3986 * sentinel-frame.c (sentinel_frame_prev_arch): New function.
3987 (sentinel_frame_unwinder): Install it.
3989 * frame.c (frame_pc_unwind): Use frame_unwind_arch instead
3991 (frame_unwind_register_value): Likewise.
3992 (frame_unwind_register_signed): Likewise.
3993 (frame_unwind_register_unsigned): Likewise.
3994 * frame-unwind.c (frame_unwind_got_optimized): Likewise.
3995 (frame_unwind_got_register): Likewise.
3996 (frame_unwind_got_constant): Likewise.
3997 (frame_unwind_got_bytes): Likewise.
3998 (frame_unwind_got_address): Likewise.
4000 * frame.h (enum frame_type): New value ARCH_FRAME.
4001 * frame.c (fprint_frame_type): Handle ARCH_FRAME.
4002 * stack.c (print_frame_info): Likewise.
4004 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4006 * target.h (struct target_ops): New member to_thread_architecture.
4007 (target_thread_architecture): New macro.
4008 * target.c (update_current_target): Inherit to_thread_architecture.
4009 (default_thread_architecture): New function.
4010 (debug_to_thread_architecture): New function.
4011 (setup_target_debug): Handle to_thread_architecture.
4013 * regcache.h (get_thread_arch_regcache): New.
4014 * regcache.c (struct regcache_list): New data type.
4015 (current_regcache): Hold regcache list instead of single regcache.
4016 (current_thread_ptid, current_thread_arch): New static variables.
4017 (get_thread_arch_regcache): New function.
4018 (get_thread_regcache): Use it. Call target_thread_architecture.
4019 (regcache_thread_ptid_changed): Update to current_regcache changes.
4020 (registers_changed): Likewise. Reset current_thread_arch and
4021 current_thread_ptid.
4023 * remote.c (remote_wait): Access target registers in target_gdbarch.
4024 * linux-nat.c (linux_nat_do_thread_registers): Likewise.
4025 * proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
4026 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
4027 * sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
4028 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
4029 * solib-svr4.c (enable_break): Likewise.
4030 (svr4_relocate_main_executable): Likewise.
4032 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4034 * python/python-internal.h (struct language_defn): Declare.
4035 (python_gdbarch, python_language): Likewise.
4036 (ensure_python_env): Add prototype.
4037 (make_cleanup_py_restore_gil): Remove prototype.
4039 * python/python.c: Include "arch-utils.h", "value.h" and "language.h".
4040 (python_gdbarch, python_language): New global variables.
4041 (struct python_env): New data type.
4042 (ensure_python_env, restore_python_env): New functions.
4043 (eval_python_from_control_command): Call ensure_python_env to
4044 install current architecture and language.
4045 (python_command, gdbpy_new_objfile): Likewise.
4046 * python/python-cmd.c: Include "arch-utils.h" and "language.h".
4047 (cmdpy_destroyer, cmdpy_function, cmdpy_completer): Call
4049 * python/python-type.c (clean_up_objfile_types): Likewise.
4050 * python/python-objfile.c: Include "language.h".
4051 (clean_up_objfile): Call ensure_python_env.
4052 * python/python-prettyprint.c (apply_val_pretty_printer): Likewise.
4053 (apply_varobj_pretty_printer): Do not call PyGILState_Ensure.
4054 * varobj.c (varobj_ensure_python_env): New helper function.
4055 (varobj_get_display_hint, update_dynamic_varobj_children,
4056 install_default_visualizer, varobj_set_visualizer, free_variable,
4057 value_get_print_value): Call it.
4058 (value_get_print_value): Add varobj argument instead of pretty
4059 printer argument. Update all callers.
4061 * python/python-utils.c (py_gil_restore, make_cleanup_py_restore_gil):
4064 * value.h (internal_function_fn): Add GDBARCH and LANGUAGE argument.
4065 (call_internal_function): Likewise.
4066 * value.c (call_internal_function): Likewise. Pass to handler.
4067 * eval.c (evaluate_subexp_standard): Update call.
4068 * python/python-function.c: Include "language.h".
4069 (fnpy_call): Add GDBARCH and LANGAUAGE arguments and call
4070 make_cleanup_python_env.
4072 * python/python-value.c (builtin_type_pyint, builtin_type_pyfloat,
4073 builtin_type_pylong, builtin_type_pybool, builtin_type_pychar,
4074 valpy_str): Use python_gdbarch and python_language instead of
4075 current_gdbarch and current_language.
4076 * python/python-type.c (typy_lookup_typename): Likewise.
4078 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4080 * arch-utils.c (selected_byte_order): Return target_byte_order_user.
4081 (show_endian): Use target_byte_order_user if specified; otherwise
4082 use get_current_arch () instead of current_gdbarch.
4083 (show_architecture): Use set_architecture_string if specified;
4084 otherwise use get_current_arch () instead of current_gdbarch.
4085 (get_current_arch): New function.
4086 * arch-utils.h (get_current_arch): Add prototype.
4088 * osabi.c (show_osabi): Use get_current_arch () instead of
4091 * findcmd.c: Include "arch-utils.h".
4092 (parse_find_args): Add BIG_P argument. Use it instead of byte order
4094 (find_command): Use get_current_arch () instead of current_gdbarch.
4095 Pass byte order to parse_find_args.
4097 * maint.c: Include "arch-utils.h".
4098 (maintenance_print_architecture): Use get_current_arch () instead
4101 * reggroups.c: Include "arch-utils.h".
4102 (maintenance_print_reggroups): Use get_current_arch () instead
4105 * symfile.c: Include "arch-utils.h".
4106 (overlay_load_command): Use get_current_arch () instead of
4109 * value.c: Include "arch-utils.h".
4110 (show_convenience): Use get_current_arch () instead of
4113 * tui/tui-regs.c: Include "arch-utils.h".
4114 (tui_reg_next_command): Use get_current_arch () instead of
4117 * mi/mi-main.c: Include "arch-utils.h".
4118 (mi_cmd_data_read_memory): Use get_current_arch () instead of
4121 * parse.c: Include "arch-utils.h".
4122 (parse_exp_in_context): Use get_current_arch () instead of
4125 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4127 * gdbtypes.c (make_pointer_type, make_reference_type,
4128 smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
4129 Use type architecture instead of current_gdbarch.
4131 * gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
4132 Add GDBARCH paramter.
4133 * gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
4134 Add GDBARCH parameter. Use it instead of current_gdbarch.
4135 * c-typeprint.c (c_type_print_modifier): Update call.
4136 * parse.c (push_type_address_space): Likewise.
4138 * findvar.c (extract_typed_address, store_typed_address): Use type
4139 architecture instead of current_gdbarch.
4141 * value.c (value_as_address, unpack_field_as_long): Use type architecture
4142 instead of current_gdbarch.
4144 * doublest.c (floatformat_from_length): Add GDBARCH argument. Use it
4145 instead of current_gdbarch.
4146 (floatformat_from_type): Pass type architecture.
4148 * infcall.c (find_function_addr): Use type architecture instead
4151 * valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
4152 value_bit_index): Use type architecture instead of current_gdbarch.
4153 * valops.c (value_cast, value_slice): Likewise.
4155 * value.h (modify_field): Add TYPE argument.
4156 * value.c (modify_field): Add TYPE argument. Use type architecture
4157 instead of current_gdbarch.
4158 (set_internalvar_component): Likewise.
4159 * eval.c (evaluate_struct_tuple): Update call.
4160 * valops.c (value_assign): Likewise.
4161 * ada-lang.c (modify_general_field): Likewise. Add TYPE argument.
4162 (make_array_descriptor): Update calls.
4163 (move_bits): Add BITS_BIG_ENDIAN_P argument. Use it instead of
4165 (ada_value_assign, value_assign_to_component): Update calls.
4166 (decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
4167 value_assign_to_component): Use type arch instead of current_gdbarch.
4169 * printcmd.c (float_type_from_length): Remove GDBARCH argument,
4170 use type architecture instead.
4171 (print_scalar_formatted, printf_command): Update calls. Use type
4172 architecture instead of current_gdbarch.
4173 * valprint.c (val_print_type_code_int): Use type architecture
4174 instead of current_gdbarch.
4175 * varobj.c (value_get_print_value): Likewise.
4176 * python/python-prettyprint.c (print_string_repr): Add GDBARCH
4177 argument. Use it instead of current_gdbarch.
4178 (apply_val_pretty_printer): Update call.
4180 * ada-valprint.c (ada_val_print_1): Use type architecture instead
4182 * c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
4183 Use it instead of current_gdbarch.
4184 (c_val_print): Update calls passing type architecture.
4185 * f-valprint.c (f_val_print): Use type architecture instead of
4187 * jv-valprint (java_value_print): Likewise.
4188 * m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
4189 Use it instead of current_gdbarch.
4190 (print_unpacked_pointer): Update calls passing type architecture.
4191 * scm-valprint.c (scm_scmval_print): Use type architecture instead of
4194 * gnu-v3-abi.c (get_class_arch): Remove.
4195 (gnuv3_rtti_type): Use get_type_arch instead of get_class_arch. Remove
4196 special-case check for Java classes.
4197 (gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
4198 gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
4199 Use get_type_arch instead of get_class_arch.
4201 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4203 * gdbtypes.h (TYPE_OBJFILE_OWNED, TYPE_OWNER): New macros.
4204 (TYPE_OBJFILE, TYPE_ALLOC, TYPE_ZALLOC): Reimplement.
4205 (alloc_type_arch): Add prototype.
4206 (alloc_type_copy): Likewise.
4207 (get_type_arch): Likewise.
4208 (arch_type): Likewise.
4209 (arch_integer_type): Likewise.
4210 (arch_character_type): Likewise.
4211 (arch_boolean_type): Likewise.
4212 (init_float_type): Remove, replace by ...
4213 (arch_float_type): ... this.
4214 (init_complex_type): Remove, replace by ...
4215 (arch_complex_type): ... this.
4216 (init_flags_type): Remove, replace by ...
4217 (arch_flags_type): ... this.
4218 (init_composite_type): Remove, replace by ...
4219 (arch_composite_type): ... this.
4221 * gdbtypes.c (alloc_type): No longer support NULL objfile.
4222 (init_type): Likewise.
4223 (alloc_type_arch): New function.
4224 (alloc_type_copy): New function.
4225 (get_type_arch): New function.
4227 (smash_type): Preserve type ownership information.
4228 (make_pointer_type, make_reference_type, make_function_type,
4229 smash_to_memberptr_type, smash_to_method_type): No longer
4230 preserve OBJFILE across smash_type calls.
4231 (make_pointer_type, make_reference_type, make_function_type,
4232 lookup_memberptr_type, lookup_methodptr_type, allocate_stub_method,
4233 create_range_type, create_array_type, create_set_type, copy_type):
4234 Use alloc_type_copy when allocating types.
4235 (check_typedef): Use alloc_type_arch.
4236 (copy_type_recursive): Likewise. Preserve type ownership data
4238 (recursive_dump_type): Dump type ownership data.
4239 (alloc_type_instance): Update type ownership check.
4240 (copy_type, copy_type_recursive): Likewise.
4242 (arch_type): New function.
4243 (arch_integer_type): Likewise.
4244 (arch_character_type): Likewise.
4245 (arch_boolean_type): Likewise.
4246 (init_float_type): Remove, replace by ...
4247 (arch_float_type): ... this.
4248 (init_complex_type): Remove, replace by ...
4249 (arch_complex_type): ... this.
4250 (init_flags_type): Remove, replace by ...
4251 (arch_flags_type): ... this.
4252 (append_flags_type_flag): Move down.
4253 (init_composite_type): Remove, replace by ...
4254 (arch_composite_type): ... this.
4255 (append_composite_type_field_aligned,
4256 append_composite_type_field): Move down.
4258 * gdbarch.c (gdbtypes_post_init): Allocate all types
4259 using per-architecture routines.
4260 * ada-lang.c (ada_language_arch_info): Likewise.
4261 * f-lang.c (build_fortran_types): Likewise.
4262 * jv-lang.c (build_java_types): Likewise.
4263 * m2-lang.c (build_m2_types): Likewise.
4264 * scm-lang.c (build_scm_types): Likewise.
4266 * ada-lang.c (ada_type_of_array): Use alloc_type_copy.
4267 (packed_array_type): Likewise.
4268 (ada_template_to_fixed_record_type_1): Likewise.
4269 (template_to_static_fixed_type): Likewise.
4270 (to_record_with_fixed_variant_part): Likewise.
4271 (to_fixed_variant_branch_type): Likewise.
4272 (to_fixed_array_type): Likewise.
4273 (to_fixed_range_type): Likewise.
4274 (empty_record): Use type instead of objfile argument.
4275 Use alloc_type_copy.
4276 (to_fixed_variant_branch_type): Update call to empty_record.
4277 * jv-lang.c (type_from_class): Use alloc_type_arch.
4279 * arm-tdep.c (arm_ext_type): Allocate per-architecture type.
4280 * i386-tdep.c (i386_eflags_type, i386_mxcsr_type, i387_ext_type,
4281 i386_mmx_type, i386_sse_type): Likewise.
4282 * ia64-tdep.c (ia64_ext_type): Likewise.
4283 * m32c-tdep.c (make_types): Likewise.
4284 * m68k-tdep.c (m68k_ps_type, m68881_ext_type): Likewise.
4285 * rs6000-tdep.c (rs6000_builtin_type_vec64,
4286 rs6000_builtin_type_vec128): Likewise.
4287 * sparc-tdep.c (sparc_psr_type, sparc_fsr_type): Likewise.
4288 * sparc64-tdep.c (sparc64_pstate_type, sparc64_fsr_type,
4289 sparc64_fprs_type): Likewise.
4290 * spu-tdep.c (spu_builtin_type_vec128): Likewise.
4291 * xtensa-tdep.c (xtensa_register_type): Likewise.
4292 * linux-tdep.c (linux_get_siginfo_type): Likewise.
4293 * target-descriptions.c (tdesc_gdb_type): Likewise.
4294 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
4296 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4298 * i386-tdep.h (struct gdbarch_tdep): Add i386_eflags_type and
4299 i386_mxcsr_type members.
4300 (i386_eflags_type): Make into function.
4301 (i386_mxcsr_type): Likewise.
4302 * i386-tdep.c (i386_eflags_type): Make into function.
4303 (i386_mxcsr_type): Likewise.
4304 (i386_register_type): Update uses.
4305 (i386_init_types): Remove.
4306 (_initialize_i386_tdep): Do not call it.
4307 * amd64-tdep.c (amd64_register_type): Update uses.
4309 * m68k-tdep.h (struct gdbarch_tdep): Add m68k_ps_type member.
4310 * m68k-tdep.c (m68k_ps_type): Make into function.
4311 (m68k_register_type): Update use.
4312 (m68k_init_types): Remove.
4313 (_initialize_m68k_tdep): Do not call it.
4315 * sparc-tdep.h (struct gdbarch_tdep): Add sparc_psr_type,
4316 sparc_fsr_type, sparc64_pstate_type, sparc64_fsr_type, and
4317 sparc64_fprs_type members.
4318 * sparc-tdep.c (sparc_psr_type): Make into function.
4319 (sparc_fsr_type): Likewise.
4320 (sparc32_register_type): Update uses.
4321 (sparc_init_types): Remove.
4322 (_initialize_sparc_tdep): Do not call it.
4323 * sparc64-tdep.c (sparc64_pstate_type): Make into function.
4324 (sparc64_fsr_type): Likewise.
4325 (sparc64_fprs_type): Likewise.
4326 (sparc64_register_type): Update uses.
4327 (sparc64_init_types): Remove.
4328 (_initialize_sparc64_tdep): Likewise.
4330 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4332 * gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,
4333 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
4334 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
4335 (init_float_type, init_complex_type): Add prototypes.
4336 * gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double,
4337 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
4338 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
4339 (_initialize_gdbtypes): Do not initialize them.
4340 (build_flt): Rename to ...
4341 (init_float_type): ... this. Make global.
4342 (build_complex): Rename to ...
4343 (init_complex_type): ... this. Make global. Remove BIT argument.
4344 (gdbtypes_post_init): Update calls.
4346 * ada-lang.c (ada_language_arch_info): Use init_float_type.
4347 * jv-lang.c (build_java_types): Likewise.
4348 * m2-lang.c (build_m2_types): Likewise.
4349 * f-lang.c (build_fortran_types): Use init_float_type and
4352 * target-descriptions.c (tdesc_gdb_type): Call init_float_type instead
4353 of using builtin_type_ieee_single, builtin_type_ieee_double, or
4354 builtin_type_arm_ext.
4356 * ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member.
4357 * ia64-tdep.c (builtin_type_ia64_ext): Remove.
4358 (_initialize_ia64_tdep): Do not initialize it.
4359 (floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext):
4361 (ia64_ext_type): New function.
4362 (ia64_register_reggroup_p, ia64_convert_register_p,
4363 ia64_register_to_value, ia64_value_to_register,
4364 ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type
4365 instead of builtin_type_ia64_ext.
4367 * i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member.
4368 (i387_ext_type): Add prototype.
4369 * i386-tdep.c (i387_ext_type): New function.
4370 (i386_extract_return_value, i386_store_return_value,
4371 i386_register_type): Use it instead of builtin_type_i387_ext.
4372 * amd64-tdep.c (amd64_register_type): Likewise.
4373 * i387-tdep.c (print_i387_value, i387_register_to_value,
4374 i387_value_to_register): Likewise.
4375 (print_i387_value, print_i387_ext): Add GDBARCH argument.
4376 (print_i387_ext, i387_print_float_info): Pass to subroutines.
4378 * m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member.
4379 * m68k-tdep.c (m68881_ext_type): New function.
4380 (m68k_register_type, m68k_convert_register_p): Use it instead
4381 of builtin_type_m68881_ext.
4383 * arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member.
4384 * arm-tdep.c (arm_ext_type): New function.
4385 (arm_register_type): Use it instead of builtin_type_arm_ext.
4387 * alpha-tdep.c (alpha_register_type): Use builtin types
4388 instead of builtin_type_ieee_double.
4390 * mips-tdep.c (mips_float_register_type, mips_double_register_type):
4392 (mips_register_type): Use builtin types instead of
4393 builtin_type_ieee_single and builtin_type_ieee_double.
4394 (mips_print_fp_register): Use builtin types instead of
4395 mips_float_register_type and mips_double_register_type.
4397 * hppa-tdep.c (hppa32_register_type, hppa64_register_type):
4398 Use builtin types instead of builtin_type_ieee_single and
4399 builtin_type_ieee_double.
4401 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4403 * gdbtypes.h (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
4404 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
4405 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
4406 builtin_type_int128, builtin_type_uint128): Remove.
4407 (struct builtin_type): New members builtin_int0, builtin_int8,
4408 builtin_uint8, builtin_int16, builtin_uint16, builtin_int32,
4409 builtin_uint32, builtin_int64, builtin_uint64, builtin_int128,
4410 and builtin_uint128.
4411 * gdbtypes.c (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
4412 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
4413 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
4414 builtin_type_int128, builtin_type_uint128): Remove.
4415 (_initialize_gdbtypes): Do not initialize them.
4416 (gdbtypes_post_init): Initialize fixed-size integer types.
4418 * dwarf2expr.c (unsigned_address_type, signed_address_type): Add
4419 GDBARCH argument. Return platform-specific type.
4420 (dwarf2_read_address, execute_stack_op): Update calls.
4422 * target-descriptions.c (tdesc_gdb_type): Use platform-specific types
4423 instead of global builtin_int_... variables.
4424 * mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
4425 * printcmd.c (do_examine): Likewise.
4426 * jv-exp.y (parse_number): Likewise.
4428 * alpha-tdep.c (alpha_register_type, alpha_push_dummy_call,
4429 alpha_store_return_value): Likewise.
4430 * amd64-linux-tdep.c (amd64_linux_register_type): Likewise.
4431 * amd64-tdep.c (amd64_register_type): Likewise.
4432 * arm-tdep.c (arm_register_type): Likewise.
4433 * avr-tdep.c (avr_register_type): Likewise.
4434 * cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
4435 * frv-tdep.c (frv_register_type): Likewise.
4436 * h8300-tdep.c h8300_register_type): Likewise.
4437 * hppa-tdep.c (hppa64_push_dummy_call, hppa32_register_type,
4438 hppa64_register_type): Likewise.
4439 * i386-tdep.c (i386_mmx_type, i386_sse_type): Likewise.
4440 * iq2000-tdep.c (iq2000_register_type): Likewise.
4441 * lm32-tdep.c (lm32_register_type, lm32_push_dummy_call): Likewise.
4442 * m32r-tdep.c (m32r_register_type): Likewise.
4443 * m68hc11-tdep.c (m68hc11_register_type, m68hc11_pseudo_register_read,
4444 m68hc11_pseudo_register_write): Likewise.
4445 * m68k-tdep.c (m68k_register_type): Likewise.
4446 * m88k-tdep.c (m88k_register_type, m88k_store_arguments): Likewise.
4447 * mep-tdep.c (mep_register_type): Likewise.
4448 * mips-tdep.c (mips_register_type, mips_pseudo_register_type,
4449 mips_print_fp_register): Likewise.
4450 * moxie-tdep.c (moxie_register_type): Likewise.
4451 * mt-tdep.c (mt_copro_register_type, mt_register_type): Likewise.
4452 * rs6000-tdep.c (rs6000_builtin_type_vec64,
4453 rs6000_builtin_type_vec128): Likewise.
4454 * score-tdep.c (score_register_type): Likewise.
4455 * sparc-tdep.c (sparc32_register_type, sparc32_store_arguments):
4457 * sparc64-tdep.c (sparc64_register_type, sparc64_store_arguments):
4459 * spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
4460 * v850-tdep.c (v850_register_type): Likewise.
4461 * xstormy16-tdep.c (xstormy16_register_type): Likewise.
4462 * xtensa-tdep.c (xtensa_register_type): Likewise.
4464 * mt-tdep.c (struct gdbarch_tdep): New data structure.
4465 (mt_gdbarch_init): Alloc TDEP structures.
4466 (mt_register_type): Cache coprocessor type in TDEP instead of
4467 static global variable.
4469 * xtensa-tdep.h (struct gdbarch_tdep): Add type_entries member.
4470 * xtensa-tdep.c (type_entries): Remove.
4471 (xtensa_register_type): Cache fixed-size types in TDEP instead
4472 of in global variable.
4474 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4476 * gdbtypes.h (builtin_type_true_char): Remove.
4477 (builtin_type_true_unsigned_char): Likewise.
4478 (struct builtin_type): Add builtin_true_char and
4479 builtin_true_unsigned_char members.
4480 * gdbtypes.c (builtin_type_true_char): Remove.
4481 (builtin_type_true_unsigned_char): Likewise.
4482 (_initialize_gdbtypes): Do not initialize them.
4483 (gdbtypes_post_init): Initialize builtin_true_char and
4484 builtin_true_unsigned_char members of builtin_type.
4486 * printcmd.c (print_scalar_formatted): Use builtin_type
4487 members instead of builtin_type_true_char and
4488 builtin_type_true_unsigned_char.
4489 * ada-valprint.c (ada_val_print_1): Likewise.
4491 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4493 * gdbtypes.h (builtin_type_void): Remove.
4494 * gdbtypes.c (builtin_type_void): Remove.
4495 (_initialize_gdbtypes): Do not initialize it.
4497 (safe_parse_type): Add GDBARCH argument. Use it to construct
4499 (check_stub_method): Update call.
4501 * infcall.c (call_function_by_hand): Use platform-specific type
4502 instead of builtin_type_void.
4503 * valops.c (value_cast): Use input void type instead of
4506 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4508 * ada-lang.c (assign_component): Use platform-specific integer type
4509 instead of builtin_type_int32 type.
4510 (ada_evaluate_subexp) [OP_ATR_SIZE]: Likewise.
4512 * ax-gdb.c (gen_expr) [UNOP_NEG]: Use platform-specific integer type
4513 instead of builtin_type_int8 type.
4514 * valarith.c (value_x_unop): Likewise.
4515 * python/python-value.c (valpy_absolute): Avoid reference to
4516 builtin_type_int8 type.
4518 * eval.c (evaluate_subexp_standard): Use platform-specific integer
4519 type instead of builtin_type_int8 as EVAL_SKIP return value type.
4520 * ada-lang.c (ada_evaluate_subexp): Likewise.
4521 * jv-lang.c (evaluate_subexp_java): Likewise.
4522 * m2-lang.c (evaluate_subexp_modula2): Likewise.
4523 * scm-lang.c (evaluate_exp): Likewise.
4525 * value.h (value_bitstring): Add INDEX_TYPE argument.
4526 * valops.c (value_bitstring): Add INDEX_TYPE argument, use it instead
4527 of builtin_type_int32 as base range type.
4528 * eval.c (evaluate_subexp_standard): Update value_bitstring call.
4530 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4532 * gdbtypes.c (lookup_array_range_type): Add prototype.
4533 (lookup_string_range_type): Likewise.
4534 * gdbtypes.c (lookup_array_range_type): New function.
4535 (lookup_string_range_type): Likewise.
4537 * ax-gdb.c (gen_repeat): Use lookup_array_range_type.
4538 * parse.c (follow_types): Likewise.
4539 * jv-lang.c (java_array_type): Likewise.
4540 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
4541 * mt-tdep.c (mt_register_type): Likewise.
4542 * sh-tdep.c (sh_sh4_build_float_register_type): Likewise.
4543 * sh64-tdep.c (sh64_build_float_register_type): Likewise.
4544 * value.c (allocate_repeat_value): Likewise.
4545 * valops.c (value_array, value_cstring): Likewise.
4546 * valops.c (value_string): Use lookup_string_range_type.
4548 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4550 * m2-typeprint.c (m2_print_bounds, m2_is_long_set_of_type): Remove
4551 redundant check for NULL TYPE_TARGET_TYPE.
4552 * m2-valprint.c (m2_print_long_set): Likewise.
4553 * p-valprint.c (pascal_type_print_base): Likewise.
4555 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4557 * printcmd.c (next_gdbarch): New static variable.
4558 (set_next_address, do_examine, x_command): Set it.
4559 (decode_format): Use 'a' size to indicate width of an address.
4560 (do_examine): Add GDBARCH argument. Handle 'a' size.
4561 (x_command): Pass architecture to do_examine.
4562 Error if called without argument the first time.
4563 (do_one_display): Pass architecture to do_examine.
4565 (examine_i_type, examine_b_type, examine_h_type, examine_w_type,
4566 examine_g_type): Remove.
4567 (_initialize_printcmd): Do not initialize them.
4568 (do_examine): Use builin_type_int... instead of examine_..._type.
4570 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4572 * gdbtypes.h (struct builtin_type): Add internal_fn member.
4573 * gdbtypes.c (gdbtypes_post_init): Initialize it.
4574 * value.c (internal_fn_type): Remove.
4575 (_initialize_values): Do not initialize it.
4577 * value.c (struct internalvar): Add enum internalvar_kind type and
4578 kind member. Restructure union internalvar_data type. Remove type,
4579 canonical, and make_value members.
4580 (init_if_undefined_command): Update for data structure changes.
4581 (create_internalvar): Likewise.
4582 (create_internalvar_type_lazy): Likewise.
4583 (get_internalvar_integer): Likewise.
4584 (get_internalvar_function): Likewise.
4585 (set_internalvar_component): Likewise.
4586 (set_internalvar): Likewise.
4587 (set_internalvar_integer): Likewise.
4588 (set_internalvar_function): Likewise.
4589 (clear_internalvar): Likewise.
4590 (add_internal_function): Likewise.
4591 (preserve_one_internalvar): New function.
4592 (preserve_values): Call it.
4594 * value.h (value_of_internalvar): Add GDBARCH parameter.
4595 (internalvar_make_value): Likewise.
4596 * value.c (value_of_internalvar): Add GDBARCH parameter. Pass it to
4597 make_value callback. Use it to generate per-architecture result value
4598 types for internal variables with no pre-defined type. Update for data
4600 (show_convenience): Pass architecture to value_of_internalvar.
4601 * eval.c (evaluate_subexp_standard): Likewise.
4602 * infrun.c (siginfo_make_value): Add GDBARCH parameter. Use it
4603 instead of current frame architecture. Return per-architecture type.
4605 * value.h (set_internalvar_string): Add prototype.
4606 * value.c (set_internalvar_string): New function.
4607 * tracepoint.c (set_traceframe_context): Use it.
4609 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4611 * jv-lang.h (java_int_type, java_byte_type, java_short_type,
4612 java_long_type, java_boolean_type, java_char_type, java_float_type,
4613 java_double_type, java_void_type): Remove.
4614 (struct builtin_java_type): New data type.
4615 (builtin_java_type): Add prototype.
4616 (java_primitive_type): Add GDBARCH argument.
4617 (java_primitive_type_from_name): Likewise.
4618 (type_from_class): Likewise.
4620 * jv-lang.c (java_int_type, java_byte_type, java_short_type,
4621 java_long_type, java_boolean_type, java_char_type, java_float_type,
4622 java_double_type, java_void_type): Remove.
4624 (build_java_types, builtin_java_type): New functions.
4625 (java_type_data): New static variable.
4626 (_initialize_java_language): Initialize it. No longer initialize
4628 (java_language_arch_info): Use per-architecture types.
4630 (java_primitive_type): Add GDBARCH argument. Return per-architecture
4631 type instead of refering to global variable.
4632 (java_primitive_type_from_name): Add GDBARCH argument.
4633 (java_primitive_type_name): New function.
4634 (java_demangled_signature_length): Use it instead of
4635 java_primitive_type_from_name.
4636 (java_demangled_signature_copy): Likewise.
4638 (type_from_class): Add GDBARCH argument. Pass to java_link_class_type,
4639 java_primitive_type, and recursive type_from_class call.
4640 (java_link_class_type): Add GDBARCH argument. Pass to type_from_class
4641 calls. Use per-architecture types instead of global types.
4643 * jv-exp.y (parse_java_type): New define.
4644 Use per-architecture types instead of global types througout.
4646 * jv-valprint.c (java_value_print): Pass architecture to
4647 type_from_class and java_primitive_type_from_name. Use per-
4648 architecture types instead of global types.
4650 2009-07-01 Doug Evans <dje@google.com>
4652 * NEWS: Mention biarch amd64-linux gdbserver and hardware watchpoint
4653 support for i386-linux, amd64-linux, and i386-win32 builds of
4656 2009-07-01 Nick Roberts <nickrob@snap.net.nz>
4658 * Makefile.in (HFILES_NO_SRCDIR): Remove entries for deleted files.
4660 2009-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
4662 * Makefile.in (TARGET_FLAGS_TO_PASS): Include also FORCE_PARALLEL.
4663 (check//%): Construct FORCE_PARALLEL for the sub-make. Extend the
4666 2009-06-30 Paul Pluzhnikov <ppluzhnikov@google.com>
4669 * dwarf2-frame.c (dwarf2_frame_state): Move cfa_offset, cfa_reg,
4670 cfa_how and cfa_exp into regs and adjust users.
4672 2009-06-30 Daniel Jacobowitz <dan@codesourcery.com>
4674 * dwarf2read.c (inherit_abstract_dies): Work around GCC PR 40573.
4676 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
4678 * mi/mi-cmd-stack.c (parse_print_values): New.
4679 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Use the above.
4681 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
4683 * varobj.c (varobj_get_type): Use type_to_string.
4685 2009-06-29 Pedro Alves <pedro@codesourcery.com>
4687 * infrun.c (handle_inferior_event): Context switch to the new
4688 thread when resuming for a new_thread_event.
4690 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4692 * ada-lang.h (ada_convert_actual): Add GDBARCH argument.
4693 * ada-lang.c (convert_actual): Remove stale prototype.
4694 (ensure_lval, make_array_descriptor, ada_convert_actual):
4695 Add GDBARCH argument and pass through to subroutine calls.
4696 (ensure_lval): Use GDBARCH instead of current_gdbarch.
4697 * infcall.c (value_arg_coerce): Update ada_convert_actual call.
4699 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4701 * ada-lang.c (resolve): Use per-architecture void type instead
4702 of platform-independent one.
4703 (ada_evaluate_subexp) [STRUCTOP_STRUCT]: Likewise.
4704 (ada_resolve_function): Reimplement fallback logic to avoid
4705 explicit reference to builtin_type_void.
4707 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4709 * ada-valprint.c (ada_print_scalar): Accept NULL type argument
4710 to indicate scalar should be printed as default integer.
4711 (print_optional_low_bound): Pass NULL to ada_print_scalar to
4712 indicate default integer output.
4713 * ada-typeprint.c (print_range, print_range_bound): Likewise.
4714 (print_choices): Likewise. Thus, accept NULL as val_type.
4715 * ada-lang.c (ada_variant_discrim_type): Return NULL when failed
4716 to look up controlling discriminant name.
4718 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4720 * ada-lang.c (to_fixed_range_type): Add ORIG_TYPE argument.
4721 Fall back to orig_type as index type if symbol lookup fails.
4722 Allocate result types from ORIG_TYPE's objfile.
4723 (ada_array_bound_from_type, to_fixed_array_type,
4724 ada_evaluate_subexp): Pass original index type to
4725 to_fixed_range_type. Do not pass objfile.
4727 * ada-typeprint.c (print_range_type_named): Add ORIG_TYPE argument.
4728 Fall back to orig_type as index type if symbol lookup fails.
4729 (print_array_type, ada_print_type): Pass original index type
4730 to print_range_type_named.
4732 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4734 * ada-lang.c (ada_index_type): Update comment.
4736 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4738 * ada-lang.c (ada_index_type): Make static. Add NAME argument.
4739 Throw error on invalid input arguments. Return NULL if unable
4740 to determine index type.
4742 (ada_array_bound_from_type): Remove TYPEP argument.
4743 (ada_array_bound): Make static. Return LONGEST instead of value.
4744 Update for ada_array_bound_from_type change.
4745 (ada_array_length): Return LONGEST instead of value.
4746 Update for ada_array_bound_from_type change.
4747 (make_array_descriptor): Update for ada_array_bound change.
4749 (ada_evaluate_subexp) [OP_ATR_RANGE, OP_ATR_FIRST, OP_ATR_LAST,
4750 OP_ATR_LENGTH]: Update for ada_array_bound_from_type,
4751 ada_array_bound, ada_array_length, ada_index_type changes.
4752 Always use ada_index_type to compute result type; fall back
4753 to architecture-specific integer type if ada_index_type fails.
4755 * ada-lang.h (ada_index_type): Remove prototype.
4756 (ada_array_bound): Likewise.
4758 2009-06-29 Pedro Alves <pedro@codesourcery.com>
4760 * dbxread.c (read_dbx_symtab): Clear has_line_numbers when ending
4763 2009-06-29 Tom Tromey <tromey@redhat.com>
4765 * README: Mention parallel check.
4767 2009-06-29 Sami Wagiaalla <swagiaal@redhat.com>
4769 * dwarf2read.c (read_import_statement): Properly set import location
4771 * cp-support.h (cp_add_using, cp_add_using_directive): Now take char*
4772 inner, char* outer arguments. Updated callers.
4774 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4776 * value.h (value_subscript, value_subscripted_rvalue,
4777 value_bitstring_subscript, value_ptradd): Use LONGEST instead
4778 of value as type of the index argument.
4779 (value_ptrsub): Remove.
4780 * valarith.c (value_subscript, value_subscripted_rvalue,
4781 value_bitstring_subscript, value_ptradd): Use LONGEST instead
4782 of value as type of the index argument.
4783 (value_ptrsub): Remove.
4785 * wrapper.h (gdb_value_subscript): Use LONGEST instead of
4786 value as type of the index argument.
4787 * wrapper.c (gdb_value_subscript): Likewise.
4789 Update calls to gdb_value_subscript, value_subscript,
4790 value_subscripted_rvalue, value_bitstring_subscript and
4791 value_ptradd to use LONGEST instead of value as index
4792 argument type. Use value_ptradd instead of value_ptrsub.
4793 * ada-lang.c (ada_value_subscript, ada_value_ptr_subscript,
4794 ada_tag_name_2): Update.
4795 * ada-tasks.c (read_atcb): Update.
4796 * eval.c (evaluate_subexp_standard): Update.
4797 * valarith.c (value_subscript): Update.
4798 * gnu-v2-abi.c (gnuv2_virtual_fn_field): Update.
4799 * gnu-v3-abi.c (gnuv3_get_virtual_fn, gnuv3_baseclass_offset,
4800 gnuv3_method_ptr_to_value): Update.
4801 * jv-lang.c (evaluate_subexp_java): Update.
4802 * m2-lang.c (evaluate_subexp_modula2): Update.
4803 * python/python-value.c (valpy_getitem, valpy_binop): Update.
4804 * wrapper.c (gdb_value_subscript): Update.
4805 * varobj.c (c_describe_child): Update.
4807 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4809 * gdbtypes.h (make_function_type): Remove OBJFILE parameter.
4810 * gdbtypes.c (make_function_type): Remove OBJFILE parameter.
4811 (lookup_function_type): Update call.
4812 * stabsread.c (read_type): Likewise.
4813 * dwarf2read.c (read_subroutine_type): Use lookup_function_type
4814 instead of make_function_type.
4815 * jv-lang.c (type_from_class): Likewise. Do not allocate types
4816 on the fake "dynamics" obstack.
4818 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4820 * gdbtypes.h (struct builtin_type): Remove builtin_core_addr,
4821 nodebug_text_symbol, nodebug_data_symbol, nodebug_unknown_symbol,
4822 and nodebug_tls_symbol members.
4823 (struct objfile_type): New data structure.
4824 (objfile_type): Add prototype.
4825 * gdbtypes.c (gdbtypes_post_init): Remove initialization code
4826 for types no longer in struct builtin_type.
4827 (objfile_type_data): New static variable.
4828 (_initialize_gdbtypes): Initialize it.
4829 (objfile_type): New function.
4831 * gdbtypes.h (builtin_type_error): Remove.
4832 * gdbtypes.c (build_complex): Do not use builtin_type_error.
4833 * symtab.c (builtin_type_error): Remove.
4834 (_initialize_symtab): Remove initialization.
4836 * stabsread.c (dbx_lookup_type, define_symbol, error_type,
4837 rs6000_builtin_type, read_range_type): Use per-objfile types
4838 instead of global or per-architecture builtin types.
4839 * coffread.c (decode_type): Likewise.
4840 * dwarf2read.c (read_array_type, read_tag_string_type,
4841 new_symbol, die_type): Likewise.
4842 * mdebugread.c (parse_symbol, basic_type, upgrade_type,
4843 parse_procedure, psymtab_to_symtab_1): Likewise.
4844 * xcoffread.c (process_xcoff_symbol): Likewise.
4845 * parse.c (write_exp_msymbol): Likewise.
4847 * stabsread.c (rs6000_builtin_type_data): New static variable.
4848 (_initialize_stabsread): Initialize it.
4849 (rs6000_builtin_type): Add OBJFILE argument. Allocate builtin
4850 types per-objfile instead of globally.
4852 * stabsread.c (dbx_lookup_type): Add OBJFILE argument. Use it
4853 instead of current_objfile; pass it to rs6000_builtin_type.
4854 (dbx_alloc_type, read_type, read_range_type): Update calls.
4855 (cleanup_undefined_types_noname): Add OBJFILE argument and
4856 pass it to dbx_lookup_type.
4857 (cleanup_undefined_types): Add OBJFILE argument and pass it
4858 to cleanup_undefined_types_noname.
4859 * stabsread.h (cleanup_undefined_types): Add OBJFILE argument.
4860 * buildsym.c (end_symtab): Update call.
4862 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4864 * darwin-nat-info.c (darwin_debug_regions_recurse): Use
4865 target_gdbarch instead of current_gdbarch.
4867 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4869 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-windows-tdep.o.
4870 (ALL_TARGET_OBS): Add moxie-tdep.o, i386-darwin-tdep.o, and
4873 * configure.tgt: Add comment.
4875 2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
4877 * mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
4879 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
4880 Jan Kratochvil <jan.kratochvil@redhat.com>
4882 * NEWS: Document inlined function support.
4883 * Makefile.in (SFILES): Add inline-frame.c.
4884 (COMMON_OBS): Add inline-frame.o.
4885 * block.c (contained_in): Rewrite to use lexical nesting.
4886 (block_linkage_function): Skip inlined function blocks.
4887 (block_inlined_p): New.
4888 * block.h (struct block): Update comment.
4889 (block_inlined_p): New prototype.
4890 * blockframe.c (get_frame_block): Handle inlined functions.
4891 (get_frame_function): Do not use block_linkage_function.
4892 (block_innermost_frame): Use get_frame_block and contained_in.
4893 * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
4894 Skip over inlined functions. Simplify epilogue check.
4895 (bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
4897 (set_momentary_breakpoint): Only accept non-inlined frames.
4898 (watch_command_1): Use frame_unwind_caller_pc and
4899 frame_unwind_caller_id instead of get_prev_frame.
4900 (until_break_command): Likewise. Use get_stack_frame_id.
4901 * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
4902 * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
4903 * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
4904 (read_func_scope, new_symbol): Likewise. Handle arguments specially
4905 for inlined functions without call site information.
4906 (inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
4907 (die_specification): Treat DW_AT_abstract_origin as a specification.
4908 (read_type_die): Handle DW_TAG_inlined_subroutine.
4909 * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
4910 * frame.c (fprint_frame_id): Print inline depth.
4911 (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
4912 (skip_inlined_frames, get_stack_frame_id): New.
4913 (frame_unwind_caller_id): Use skip_inlined_frames.
4914 (frame_id_inlined_p): New.
4915 (frame_id_eq): Make the logic match the comments. Add inline_depth
4917 (frame_id_inner): Handle inlined functions.
4918 (frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
4919 (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
4920 (get_prev_frame_1): Check for inline frames. Split out frame
4921 allocation to get_prev_frame_raw.
4922 (get_prev_frame_raw): New function.
4923 (get_prev_frame): Handle inline frames.
4924 (get_frame_pc): Use frame_unwind_pc.
4925 (get_frame_address_in_block): Skip inlined frames on both sides.
4926 (pc_notcurrent): Delete.
4927 (find_frame_sal): Rewrite to handle inline call sites. Use
4928 get_frame_address_in_block.
4929 (deprecated_update_frame_pc_hack): Make static.
4930 * frame.h: Update comments.
4931 (struct frame_id): Add inline_depth.
4932 (enum frame_type): Add INLINE_FRAME.
4933 (frame_id_inlined_p, get_stack_frame_id): New prototypes.
4934 * gdbthread.h (struct thread_info): Add step_stack_frame_id field.
4935 * infcmd.c (set_step_frame): New function.
4936 (step_once): Use set_step_frame. Handle inlined functions.
4937 (until_next_command): Use set_step_frame.
4938 (finish_backward), finish_forward): Use get_stack_frame_id.
4939 (finish_command): Support inlined functions.
4940 * inferior.h (set_step_info): New prototype.
4941 * infrun.c (RESUME_ALL): Use minus_one_ptid.
4942 (clear_proceed_status): Clear step_stack_frame_id.
4943 (init_wait_for_inferior): Call clear_inline_frame_state.
4944 (init_execution_control_state): Make static.
4945 (set_step_info): New function.
4946 (init_thread_stepping_state): Do not set the symtab or line here.
4947 (stepped_in_from): New function.
4948 (handle_inferior_event): Handle inlined functions. Use set_step_info.
4949 (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
4950 (struct inferior_status): Add step_stack_frame_id.
4951 (save_inferior_status, restore_inferior_status): Save and restore
4952 step_stack_frame_id.
4953 * inline-frame.c, inline-frame.h: New files.
4954 * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
4955 * regcache.c (regcache_write_pc): Call reinit_frame_cache.
4956 * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
4957 * stack.c (frame_show_address): New.
4958 (print_frame_info, print_frame): Use it.
4959 (find_frame_funname): Use get_frame_function. Handle inlined blocks.
4960 (frame_info): Mark inlined functions.
4961 (backtrace_command_1): Use get_current_user_frame.
4962 (print_frame_local_vars, print_frame_label_vars): Update comments.
4963 (return_command): Refuse inlined functions.
4964 * symtab.c (lookup_symbol_aux_local): Stop at inlined function
4966 (find_function_start_sal): Avoid inlined functions.
4967 (completion_list_add_fields): New function.
4968 (default_make_symbol_completion_list): Use it. Use block_static_block
4969 and block_global_block. Check for inlined functions.
4970 (skip_prologue_using_sal): Avoid line number comparison across
4972 * symtab.h (struct symbol): Add is_inlined.
4973 (SYMBOL_INLINED): New.
4974 * target.c (target_resume): Call clear_inline_frame_state.
4975 * valops.c (value_of_variable): Check block_inlined_p.
4977 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
4979 * frame.c (frame_unwind_id): Renamed to ...
4980 (frame_unwind_caller_id): ... this. All callers updated.
4981 (frame_pc_unwind): Renamed to ...
4982 (frame_unwind_caller_pc): ... this. All callers updated.
4983 * frame.h: Document frame_unwind_caller_WHAT functions.
4984 (frame_unwind_id): Renamed to ...
4985 (frame_unwind_caller_id): ... this.
4986 (frame_pc_unwind): Renamed to ...
4987 (frame_unwind_caller_pc): ... this.
4988 * hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
4989 * stack.c (parse_frame_specification_1): Do not rely on
4992 2009-06-27 Michael Snyder <msnyder@vmware.com>
4994 * infrun.c (handle_inferior_event): Improve handling of
4995 reverse-stepping into and over shared library functions.
4997 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
4999 * linespec.c (find_method): Add new not_found_ptr parameter to
5000 bring in line with symtab_from_filename, decode_variable.
5001 (decode_compound): Likewise. Also propagate not_found_ptr to
5003 (decode_line_1): Propagate not_found_ptr to decode_compound.
5004 (cplusplus_error): Now throws NOT_FOUND_ERROR.
5006 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
5008 * MAINTAINERS (Write After Approval): Add self.
5010 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5012 * valops.c (value_one): Reimplement broken decimal-float case.
5014 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5016 * eval.c (evaluate_subexp_standard): Use expression architecture
5017 instead of current_gdbarch.
5019 * infrun.c (handle_inferior_event): Avoid unncessary reference
5020 to current_gdbarch and get_current_frame ().
5022 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5024 * breakpoint.h (set_longjmp_breakpoint): Add THREAD argument.
5025 (enum bptype): Add bp_longjmp_master.
5027 * breakpoint.c (create_longjmp_master_breakpoint): New function.
5028 (update_breakpoints_after_exec): Handle bp_longjmp_master
5029 breakpoints. Call create_longjmp_master_breakpoint.
5030 (print_it_typical, bpstat_stop_status, bpstat_what,
5031 print_one_breakpoint_location, allocate_bp_location, mention,
5032 delete_command, breakpoint_re_set_one): Handle bp_longjmp_master.
5033 (breakpoint_re_set): Call create_longjmp_master_breakpoint.
5034 (create_longjmp_breakpoint): Delete.
5035 (set_longjmp_breakpoint): Add THREAD argument. Reimplement
5036 to install momentary clones of bp_longjmp_master breakpoints.
5038 * infcmd.c (step_1): Pass thread to set_longjmp_breakpoint.
5040 2009-06-23 Cary Coutant <ccoutant@google.com>
5042 * dwarf2read.c (dwarf_decode_lines): Ignore rows where is_stmt is 0.
5043 Set basic_block to 0 after a special opcode.
5045 2009-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
5047 Fix a regression by the mmap patch from 2009-06-16.
5048 * symfile.c (reread_symbols): Move sym_finish and clear_objfile_data
5049 calls before deleting the OBJFILE obstack. Extend the comment.
5051 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5053 * jv-lang.h (JAVA_OBJECT_SIZE): Remove.
5054 (get_java_object_header_size): Add GDBARCH parameter.
5055 * jv-lang.c (get_java_object_header_size): Add GDBARCH parameter.
5056 Use it instead of current_gdbarch.
5057 (evaluate_subexp_java): Replace JAVA_OBJECT_SIZE with call to
5058 get_java_object_header_size.
5059 * jv-valprint.c (java_value_print): Likewise.
5061 2009-06-23 Sami Wagiaalla <swagiaal@redhat.com>
5063 * dwarf2read.c (process_die): Handle import statements
5064 (DW_TAG_imported_declaration, case DW_TAG_imported_module)
5065 (read_import_statement): New.
5066 (read_func_scope): Update using_directives to point to current context
5067 (read_lexical_block_scope): Ditto.
5068 * cp-support.h: Added prototype for cp_add_using.
5069 * cp-namespace.c: Removed local context_stack.
5070 (cp_initialize_namespace): Deleted.
5071 (cp_finalize_namespace): Deleted.
5072 (cp_add_using_directive): Use using_directives instead of using_list.
5073 (cp_add_using): No longer static.
5074 * buildsym.h: Created global using_direct variable.
5075 Created using_direct variable in context_stack.
5076 * buildsym.c (finish_block): Set using directives for the block under
5078 (start_symtab): Removed call to cp_initialize_namespace().
5079 (end_symtab): Removed call to cp_finalize_namespace().
5080 (push_context): Save and reset using_directives.
5081 * block.c (block_using): Return using directives for given
5082 block instead of static block.
5084 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5086 * target-descriptions.h (struct type): Do not declare.
5087 (struct tdesc_type): Declare.
5088 (tdesc_named_type): Change return type to struct tdesc_type *.
5089 (tdesc_record_type): Remove.
5090 (tdesc_create_vector): Add prototype.
5091 (tdesc_create_union): Likewise.
5092 (tdesc_add_field): Likewise.
5094 * target-descriptions.c (struct tdesc_reg): Replace gdb_type
5095 member by tdesc_type member.
5096 (struct tdesc_type_field, tdesc_type_field): Add type and vector def.
5097 (struct tdesc_type, tdesc_type_p): Likewise.
5098 (struct tdesc_arch_reg, tdesc_arch_reg): Likewise.
5099 (struct tdesc_feature): Change type of "types" to VEC(tdesc_type_p).
5100 (struct tdesc_arch_data): Replace registers member by arch_regs.
5102 (tdesc_predefined_types): Change to array of pre-defined
5103 struct tdesc_type structures. Add "code_ptr" and "data_ptr".
5104 (tdesc_named_type): Return struct tdesc_type * instead of GDB type.
5105 (tdesc_gdb_type): New function.
5107 (target_find_description): Update for data structure changes.
5108 (tdesc_data_cleanup): Likewise.
5109 (tdesc_numbered_register): Likewise.
5110 (tdesc_use_registers): Likewise.
5111 (tdesc_create_reg): Likewise.
5113 (tdesc_find_arch_register): New function.
5114 (tdesc_find_register): Use it.
5115 (tdesc_register_type): Use tdesc_gdb_type to generate GDB type from
5116 tdesc_type on demand; cache generated types in tdesc_arch_reg.
5118 (tdesc_free_type): New function.
5119 (tdesc_free_feature): Call it.
5121 (tdesc_create_vector): New function.
5122 (tdesc_create_union): Likewise.
5123 (tdesc_add_field): Likewise.
5124 (tdesc_record_type): Remove.
5126 (tdesc_type_id): Remove.
5127 (maint_print_c_tdesc_cmd): Update for data structure changes. Update
5128 generated code to create tdesc_type structures instead of GDB types.
5130 * xml-tdesc.c: Do not include "gdbtypes.h".
5131 (struct tdesc_parsing_data): Change type of current_union to
5132 struct tdesc_type *.
5133 (tdesc_start_reg): Do not special-case "code_ptr" or "data_ptr".
5134 (tdesc_start_union): Call tdesc_create_union.
5135 (tdesc_start_field): Call tdesc_add_field.
5136 (tdesc_start_vector): Call tdesc_create_vector.
5137 (tdesc_end_union): Remove.
5138 (feature_children): Remove reference to tdesc_end_union.
5140 * features/arm-with-iwmmxt.c: Regenerate.
5141 * features/mips-linux.c: Regenerate.
5142 * features/mips64-linux.c: Regenerate.
5143 * features/rs6000/powerpc-32.c: Regenerate.
5144 * features/rs6000/powerpc-32l.c: Regenerate.
5145 * features/rs6000/powerpc-403.c: Regenerate.
5146 * features/rs6000/powerpc-403gc.c: Regenerate.
5147 * features/rs6000/powerpc-505.c: Regenerate.
5148 * features/rs6000/powerpc-601.c: Regenerate.
5149 * features/rs6000/powerpc-602.c: Regenerate.
5150 * features/rs6000/powerpc-603.c: Regenerate.
5151 * features/rs6000/powerpc-604.c: Regenerate.
5152 * features/rs6000/powerpc-64.c: Regenerate.
5153 * features/rs6000/powerpc-64l.c: Regenerate.
5154 * features/rs6000/powerpc-7400.c: Regenerate.
5155 * features/rs6000/powerpc-750.c: Regenerate.
5156 * features/rs6000/powerpc-860.c: Regenerate.
5157 * features/rs6000/powerpc-altivec32.c: Regenerate.
5158 * features/rs6000/powerpc-altivec32l.c: Regenerate.
5159 * features/rs6000/powerpc-altivec64.c: Regenerate.
5160 * features/rs6000/powerpc-altivec64l.c: Regenerate.
5161 * features/rs6000/powerpc-e500.c: Regenerate.
5162 * features/rs6000/powerpc-e500l.c: Regenerate.
5163 * features/rs6000/powerpc-isa205-32l.c: Regenerate.
5164 * features/rs6000/powerpc-isa205-64l.c: Regenerate.
5165 * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
5166 * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
5167 * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
5168 * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
5169 * features/rs6000/powerpc-vsx32.c: Regenerate.
5170 * features/rs6000/powerpc-vsx32l.c: Regenerate.
5171 * features/rs6000/powerpc-vsx64.c: Regenerate.
5172 * features/rs6000/powerpc-vsx64l.c: Regenerate.
5173 * features/rs6000/rs6000.c: Regenerate.
5175 2009-06-23 Joel Brobecker <brobecker@adacore.com>
5177 * ada-lang.c (decode_packed_array): If the value is a pointer to
5178 an array, then use value_ind to dereference it, not ada_value_ind.
5179 (ada_template_to_fixed_record_type_1): Handle the case where a
5180 dynamic field is an aligner type.
5181 (to_fixed_array_type): Add handling for packed array types.
5182 (ada_get_base_type): Do not follow the XVS type if the type is
5184 (ada_evaluate_subexp): Split a few statements up for clarity
5186 <OP_FUNCALL>: Add handling of the case of a packed array that
5187 has already been fixed.
5189 2009-06-23 Joel Brobecker <brobecker@adacore.com>
5191 * ada-lang.c (evaluate_subexp): Delete. Use the version from eval.c.
5192 (evaluate_subexp_type): Reimplement using evaluate_subexp.
5193 * value.h (evaluate_subexp): Add declaration.
5194 * eval.c (evaluate_subexp): Make non-static.
5195 * objc-lang.c (print_object_command): Use evaluate_subexp.
5197 2009-06-23 Paul Pluzhnikov <ppluzhnikov@google.com>
5199 Revert 2009-05-14 breakpoint commit (no longer needed).
5200 * breakpoint.h (breakpoint_re_set_objfile): Remove
5201 * breakpoint.c (breakpoint_re_set_objfile): Likewise
5202 (create_overlay_event_breakpoint): Remove objfile parameter,
5203 iterate over all objfiles.
5204 * objfiles.c (objfile_relocate): Update.
5205 * symfile.c (new_symfile_objfile): Likewise.
5207 2009-06-23 Tom Tromey <tromey@redhat.com>
5210 * c-lang.c (classify_type): Iterate over typedefs.
5211 * c-valprint.c (textual_element_type): Iterate over typedefs.
5213 2009-06-22 Tristan Gingold <gingold@adacore.com>
5215 * darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
5218 2009-06-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5221 * buildsym.c (block_compar): New function.
5222 (end_symtab): Replace the bubble sort by a qsort based code.
5224 2009-06-22 Sami Wagiaalla <swagiaal@redhat.com>
5226 * MAINTAINERS (Write After Approval): Add self.
5228 2009-06-22 Ulrich Weigand <uweigand@de.ibm.com>
5230 * spu-tdep.c (spu_get_longjmp_target): New function.
5231 (spu_gdbarch_init): Install it.
5233 2009-06-22 H.J. Lu <hongjiu.lu@intel.com>
5236 * remote.c (getpkt_or_notif_sane_1): Initialize val to -1.
5238 2009-06-21 Michael Snyder <msnyder@vmware.com>
5240 * inferior.h: Update ancient comment.
5242 2009-06-20 Aleksandar Ristovski <aristovski@qnx.com>
5243 Pedro Alves <pedro@codesourcery.com>
5245 * solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
5247 (scan_dyntag): Skip if input bfd isn't elf flavoured.
5248 (locate_base): Call elf_locate_base even without an exec_bfd.
5250 2009-06-19 Samuel Bronson <naesten@gmail.com>
5253 * cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
5254 for prefix commands to avoid duplicates in the output.
5256 2009-06-19 Samuel Bronson <naesten@gmail.com>
5259 * cli/cli-decode.c (apropos_cmd): Fix avoidance of double
5262 2009-06-19 Jerome Guitton <guitton@adacore.com>
5264 * breakpoint.c (expand_line_sal_maybe): When explicit_line,
5265 skip prologue on each sals.
5266 (skip_prologue_sal): Return explicit_line and explicit_pc
5269 2009-06-19 Tristan Gingold <gingold@adacore.com>
5271 * darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
5274 2009-06-19 Tristan Gingold <gingold@adacore.com>
5275 * machoread.c (macho_symtab_read): Adjust for bfd changes.
5276 * darwin-nat.h (struct darwin_exception_msg): New type to describe
5278 (struct private_thread_info): New type to describe the state of the
5280 (DEF_VEC_I thread_t): Removed, replaced by ...
5281 (DEF_VEC_O darwin_thread_t): ... this new type.
5282 (struct darwin_inferior): Renamed to ...
5283 (struct private_inferior): ... this type. Fields added.
5284 (darwin_not_port): Moved into the private inferior structure.
5285 * darwin-nat.c: Add includes, improve comments.
5286 Rewrite to handle multiple threads and processes.
5287 (darwin_resume_to): New function and protype.
5288 (darwin_resume, darwin_wait_to, darwin_wait): Ditto.
5289 (darwin_kill_inferior): Add ops argument.
5290 (darwin_pid_to_str): New function.
5291 (darwin_thread_alive): Ditto.
5292 (darwin_inf, darwin_not_port): Removed.
5293 (darwin_inf_fake_stop): New variable.
5294 (msgin, msgout, msg_state, exc_msg): Removed.
5295 (mach_check_error): Use warning instead of error.
5296 (darwin_ptrace): Adjust debug level.
5297 (cmp_thread_t): Fix names (typo).
5298 (darwin_check_new_threads): Argument is now an inferior,
5299 adjust for new structures, add no change check, ignore dead ports,
5300 handle first thread case.
5301 (find_inferior_task_it): New function.
5302 (find_inferior_notify_it): Ditto.
5303 (darwin_find_inferior_by_task): Ditto.
5304 (darwin_find_inferior_by_notify): Ditto.
5305 (darwin_find_thread): Ditto.
5306 (darwin_suspend_inferior): Ditto.
5307 (darwin_resume_inferior): Ditto.
5308 (catch_exception_raise_state): Removed.
5309 (catch_exception_raise_state_identity): Removed.
5310 (darwin_suspend_inferior_it): New function.
5311 (darwin_resume_inferior_it): Ditto.
5312 (darwin_dump_message): New function, extracted from darwin_wait.
5313 (darwin_decode_exception_message): New function.
5314 (darwin_encode_reply): New function.
5315 (catch_exception_raise): Removed.
5316 (darwin_send_reply): New function, extracted from darwin_resume.
5317 (darwin_resume_thread): New function, extracted from darwin_resume.
5318 (struct resume_inferior_threads_param): New type.
5319 (darwin_resume_inferior_threads_it): New function.
5320 (darwin_resume_inferior_threads): New function.
5321 (darwin_suspend_inferior_threads): New function.
5322 (darwin_resume): Mostly rewritten to handle multiple threads and
5324 (darwin_decode_message): New function extracted from darwin_wait.
5325 (cancel_breakpoint): New function.
5326 (darwin_wait): Mostly rewritten. Handle multiple threads.
5327 (darwin_mourn_inferior): Adjust for per process structures.
5328 (darwin_reply_to_all_pending_messages): New function.
5329 (darwin_stop_inferior): Adjust for per inferior structures.
5330 (darwin_attach_pid): Ditto.
5331 (darwin_init_thread_list): Ditto.
5332 (darwin_attach): Ditto.
5333 (darwin_detach): Ditto.
5334 (darwin_files_info): Now empty.
5335 (darwin_pid_to_str): Adjust returns string to match one expected by
5337 (darwin_read_write_inferior): Rename err variable to match other uses.
5338 Adjust debug message. Handle submaps.
5339 (darwin_xfer_memory): Adjust for per inferior structures.
5340 (set_enable_mach_exceptions): Ditto.
5341 (darwin_pid_to_exec_file): New function.
5342 (darwin_get_ada_task_ptid): Ditto.
5343 (darwin_supports_multi_process): Ditto.
5344 (_initialize_darwin_inferior): Remove useless assertion, adjust for
5345 per inferior structures. Add new target operations.
5347 2009-06-18 Hui Zhu <teawater@gmail.com>
5348 Michael Snyder <msnyder@vmware.com>
5350 * infrun.c (handle_inferior_event): Improve reverse stepping
5351 through function epilogue.
5353 * infrun.c (handle_inferior_event): Reverse-next through
5356 2009-06-18 Paul Pluzhnikov <ppluzhnikov@google.com>
5358 * dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
5361 2009-06-17 Tom Tromey <tromey@redhat.com>
5363 * dwarf2read.c (zlib_decompress_section): Use a cleanup.
5365 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5367 * gdbarch.sh (pointer_to_address): Change to type 'm'.
5368 (address_to_pointer): Likewise.
5369 * gdbarch.c, gdbarch.h: Regenerate.
5371 * inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
5372 (signed_pointer_to_address): Likewise.
5373 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
5374 * findvar.c (unsigned_pointer_to_address): Likewise.
5375 (signed_pointer_to_address): Likewise.
5376 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
5378 * avr-tdep.c (avr_address_to_pointer): Likewise.
5379 (avr_pointer_to_address): Likewise.
5380 * iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
5381 (iq2000_address_to_pointer): Likewise.
5382 * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
5383 (m32c_m16c_pointer_to_address): Likewise.
5384 * spu-tdep.c (spu_pointer_to_address): Likewise.
5385 * xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
5386 (xstormy16_address_to_pointer): Likewise.
5388 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5390 * printcmd.c (print_scalar_formatted): Always truncate
5391 unsigned data types.
5393 * cli-dump.c (struct callback_data): Change type of load_offset
5395 (restore_binary_file): Update type casts.
5396 (restore_command): Parse load_offset as address, not long.
5398 * utils.c (string_to_core_addr): Do not sign-extend value.
5399 * varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
5400 before comparing against requested frame address.
5402 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5404 * gdbarch.sh (gcore_bfd_target): New gdbarch callback.
5405 * gdbarch.h, gdbarch.c: Regenerate.
5407 * gcore.c (default_gcore_target): Make return value const.
5408 Call gdbarch_gcore_bfd_target if present.
5409 (default_gcore_arch, default_gcore_mach): Use target_gdbarch.
5411 * corelow.c (core_read_description): Call gdbarch_core_read_description
5412 on core_gdbarch instead of current_gdbarch.
5414 * ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.
5416 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5418 * gdbtypes.c (create_string_type): Receive character type as argument.
5419 * gdbtypes.h (create_string_type): Add character type argument.
5420 * dwarf2read.c (read_tag_string_type): Pass character type to
5423 * value.h (value_string): Add character type argument.
5424 * valops.c (value_string): Add character type argument. Pass it to
5425 create_string_type. Do not allocate space in inferior.
5426 * valarith.c (value_concat): Pass character type to value_string.
5428 * value.h (value_typed_string): Rename to ...
5429 (value_cstring): ... this.
5430 * valops.c (value_typed_string): Rename to ...
5431 (value_cstring): ... this.
5432 * c-lang.c (evaluate_subexp_c): Update.
5434 * python/python-value.c (builtin_type_pychar): New define.
5435 (convert_value_from_python): Call value_cstring instead
5436 of value_from_string.
5437 * value.c (value_from_string): Remove.
5438 * value.h (value_from_string): Remove.
5440 * eval.c (evaluate_subexp_standard): Pass character type to
5441 value_string. Pass expression architecture to value_nsstring
5442 and lookup_child_selector.
5443 * objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
5444 (lookup_child_selector): Likewise.
5445 (value_nsstring): Likewise.
5446 * objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
5447 Pass character type to value_string..
5448 (lookup_child_selector): Likewise.
5449 (value_nsstring): Add GDBARCH parameter, use it instead of
5450 objfile architecture. Pass architecture to lookup_objc_class
5451 and lookup_child_selector. Pass character type to value_string.
5452 (end_msglist): Pass architecture to lookup_objc_class.
5453 * objc-exp.y: Pass architecture to lookup_objc_class.
5455 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5457 * gdbtypes.h (struct language_defn): Add forward declaration.
5458 (lookup_typename): Add LANGUAGE and GDBARCH parameters.
5459 (lookup_unsigned_typename): Likewise.
5460 (lookup_signed_typename): Likewise.
5461 * gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
5462 Use them instead of current_language and current_gdbarch.
5463 (lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
5464 Pass them to lookup_typename.
5465 (lookup_signed_typename): Likewise.
5467 * c-exp.y: Pass parse_language and parse_gdbarch to
5468 lookup_unsigned_typename and lookup_signed_typename.
5469 * objc-exp.y: Likewise.
5470 * m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.
5472 * c-lang.c (evaluate_subexp_c): Pass expression language and
5473 gdbarch to lookup_typename.
5474 * printcmd.c (printf_command): Pass current language and
5475 gdbarch to lookup_typename.
5476 * python/python-type.c (typy_lookup_typename): Likewise.
5477 Include "language.h".
5479 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5481 * sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
5482 Use it instead of current_gdbarch. Pass architecture to
5483 sparc32_gregset_supplies_p.
5484 (sparc64_fpregset_supplies_p): Add GDBARCH parameter. Use it instead
5485 of current_gdbarch. Pass architecture to sparc32_fpregset_supplies_p.
5486 * sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
5487 sparc64nbsd_fpregset_supplies_p): Likewise.
5488 * sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
5489 Add GDBARCH parameter.
5490 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
5491 (sparc_fetch_inferior_registers): Pass regcache architecture to
5492 sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
5493 (sparc_store_inferior_registers): Likewise.
5494 * sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
5495 Add GDBARCH parameter.
5496 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
5498 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5500 * ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
5502 * aix-thread.c (pd_enable): Likewise.
5503 * amd64-linux-nat.c (ps_get_thread_area): Likewise.
5504 * bsd-uthread.c (bsd_uthread_activate): Likewise.
5505 * linux-nat.c (linux_nat_info_proc_cmd): Likewise.
5506 * linux-thread-db.c (enable_thread_event): Likewise.
5507 * monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
5508 * nto-procfs.c (procfs_open): Likewise.
5509 * procfs.c (invalidate_cache, procfs_insert_watchpoint,
5510 info_proc_mappings, info_mappings_callback): Likewise.
5511 * record.c (record_open): Likewise.
5512 * rs6000-nat.c (ARCH64): Likewise.
5513 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
5514 (darwin_bfd_open): Likewise.
5515 * memattr.c (mem_info_command): Likewise.
5517 * windows-nat.c (win32_resume): Use current regcache architecture
5518 instead of current_gdbarch.
5520 * dbug-rom.c (dbug_regname): Remove check against number of
5521 registers in current_gdbarch.
5522 * solib-pa64.c (read_dynamic_info): Remove unused variable.
5524 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5526 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
5527 use it instead of current_gdbarch.
5528 * frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
5529 * arm-tdep.c (arm_skip_prologue): Pass architecture to
5530 deprecated_pc_in_call_dummy.
5532 * symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
5533 Use it instead of current_gdbarch.
5534 * symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
5535 * breakpoint.c (expand_line_sal_maybe): Pass architecture to
5536 skip_prologue_using_sal.
5537 * arm-tdep.c (skip_prologue_using_sal): Likewise.
5538 * lm32-tdep.c (lm32_skip_prologue): Likewise.
5539 * m32-tdep.c (m32c_skip_prologue): Likewise.
5540 * mips-tdep.c (mips_skip_prologue): Likewise.
5541 * moxie-tdep.c (moxie_skip_prologue): Likewise.
5542 * mt-tdep.c (mt_frame_unwind_cache): Likewise.
5543 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
5544 * frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
5545 it to skip_prologue_using_sal. Update call sites ...
5546 (frv_skip_prologue, frv_frame_unwind_cache): ... here.
5548 * mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
5549 (check_for_saved): Use it instead of current_gdbarch.
5550 (mn10300_analyze_prologue): Set it.
5552 * value.c (using_struct_return): Add GDBARCH parameter. Use it
5553 instead of current_gdbarch.
5554 * value.h (using_struct_return): Add GDBARCH parameter.
5555 * eval.c (evaluate_subexp_standard): Pass architecture to
5556 using_struct_return.
5557 * infcall.c (call_function_by_hand): Likewise.
5558 * stack.c (return_command): Likewise.
5559 * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
5561 * symtab.c (in_prologue): Add GDBARCH parameter. Use it instead of
5563 * symtab.h (in_prologue): Add GDBARCH parameter.
5564 * infrun.c (handle_inferior_event): Pass architecture to in_prologue.
5566 * eval.c (evaluate_subexp_standard): Use expression architecture
5567 instead of current_gdbarch.
5569 * c-lang.c (evaluate_subexp_c): Use expression architecture and
5570 language instead of current_gdbarch and current_language.
5572 * printcmd.c (do_one_display): Use expression architecture instead
5575 * infcmd.c (print_return_value): Use architecture of stop_regcache
5576 instead of current_gdbarch.
5577 (print_vector_info, print_float_info): Remove GDBARCH argument,
5578 use frame architecture instead.
5579 (vector_info, float_info): Update calls.
5581 * objc-lang.c (objc_skip_trampoline): Use frame architecture
5582 instead of current_gdbarch.
5584 * parse.c (write_dollar_variable): Use parse architecture instead
5587 * source.c (line_info): Use objfile architecture instead of
5590 * symtab.c (find_function_start_sal): Use gdbarch instead of
5592 (print_msymbol_info): Use objfile architecture instead of
5595 * valops.c (value_assign): Use frame architecture instead of
5598 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5600 * buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.
5602 * coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
5603 calling record_line.
5604 (enter_linenos): Likewise.
5605 * dbxread.c (process_one_symbol): Likewise.
5606 * dwarf2read.c (dwarf_decode_lines): Likewise.
5607 * mdebugread.c (psymtab_to_symtab_1): Likewise.
5608 * xcoffread.c (enter_line_range): Likewise.
5610 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5612 * ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
5613 architecture instead of current_gdbarch.
5614 (gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
5615 (gen_expr): Pass expression to get_struct_ref.
5617 * symtab.h (struct symbol_ops): Add GDBARCH parameter to
5618 tracepoint_var_ref callback.
5619 * ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
5620 symbol operation callback.
5621 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
5622 Use it instead of current_gdbarch.
5623 (locexpr_tracepoint_var_ref): Add GDBARCH parameter. Pass it to
5624 dwarf2_tracepoint_var_ref.
5625 (loclist_tracepoint_var_ref): Likewise.
5627 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5629 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
5630 Use it instead of address bits of current_gdbarch.
5631 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
5632 * arm-tdep.c (thumb_analyze_prologue): Pass address bits to
5634 (arm_scan_prologue): Likewise.
5635 * m32c-tdep.c (m32c_analyze_prologue): Likewise.
5636 * mep-tdep.c (mep_analyze_prologue): Likewise.
5637 * mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
5638 * s390-tdep.c (s390_analyze_prologue): Likewise.
5640 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5642 * mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
5643 frame architecture instead of current_gdbarch.
5644 (mi_cmd_data_list_changed_registers): Likewise.
5645 (mi_cmd_data_list_register_values): Likewise. Pass selected
5646 frame to get_register.
5647 (get_register): Add FRAME argument, use it as frame to retrieve
5648 registers from (instead of selected frame). Use frame architecture
5649 instead of current_gdbarch.
5650 (mi_cmd_data_write_register_values): Use current regcache
5651 architecture instead of current_gdbarch.
5653 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5655 * tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
5656 use frame architecture instead. Replace current_gdbarch uses.
5657 (tui_show_registers): Update call.
5658 (tui_get_register): Remove GDBARCH parameter; use frame architecture
5660 (tui_show_register_group): Update call.
5661 (tui_check_register_values): Likewise.
5662 (tui_register_format): Remove GDBARCH parameter; use frame
5663 architecture instead. Replace current_gdbarch uses.
5664 (tui_get_register): Update call.
5666 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5668 * gdbarch.sh (construct_inferior_arguments): Remove.
5669 * gdbarch.c, gdbarch.h: Regenerate.
5670 * infcmd.c (get_inferior_args): Call construct_inferior_arguments
5671 directly instead of gdbarch_construct_inferior_arguments.
5672 (construct_inferior_arguments): Remove GDBARCH argument.
5673 * inferior.h (construct_inferior_arguments): Likewise.
5675 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5677 * symfile.c (section_is_mapped): Use objfile architecture instead
5679 (TARGET_LONG_BYTES): Remove.
5680 (read_target_long_array): Add SIZE argument. Use it instead of
5682 (simple_read_overlay_table): Retrieve long size from objfile
5683 architecture; pass it to read_target_long_array.
5684 (simple_read_overlay_region_table): Likewise.
5685 (simple_overlay_update_1): Likewise.
5687 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5689 * infrun.c (cleanup_displaced_step_closure): Remove.
5690 (displaced_step_clear_cleanup): Move to before displaced_step_prepare.
5691 (displaced_step_prepare): Use displaced_step_clear_cleanup instead
5692 of cleanup_displaced_step_closure.
5693 (handle_inferior_event, keep_going): Use thread architecture instead
5696 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5698 * infrun.c (handle_inferior_event): Use current frame architecture
5699 or thread architecture instead of current_gdbarch. Pass to
5700 handle_step_into_function and handle_step_into_function_backward.
5701 (handle_step_into_function): Add GDBARCH parameter. Use it instead
5703 (handle_step_into_function_backward): Likewise.
5704 (insert_step_resume_breakpoint_at_frame): Use frame architecture
5705 instead of current_gdbarch.
5706 (insert_step_resume_breakpoint_at_caller): Likewise.
5708 2009-06-17 Pierre Muller <muller@ics.u-strasbg.fr>
5709 Pedro Alves <pedro@codesourcery.com>
5711 * infcmd.c (post_create_inferior): Call breakpoint_re_set after target
5712 is pushed for watchpoint promotion to hardware watchpoint.
5714 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
5716 * dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
5717 (dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
5718 (dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
5719 (dwarf_ranges_section, dwarf_frame_section)
5720 (dwarf_eh_frame_section): Removed.
5721 (dwarf2_resize_section): Likewise.
5722 (dwarf2_read_section): Now static, use bfd_mmap() if possible.
5723 (dwarf2_get_section_info): New function.
5724 (munmap_section_buffer): Likewise.
5725 (dwarf2_per_objfile_cleanup): Likewise.
5726 (section_is_p): Signature change.
5727 * dwarf2-frame.c (dwarf2_build_frame_info): Use
5728 dwarf2_get_section_info instead of dwarf2_read_section.
5730 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
5732 * solib.c (symbol_add_stub): New FLAGS parameter.
5733 (solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
5735 (solib_add): Defer breakpoint_re_set until after all solibs.
5736 * bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
5737 * rs6000-nat.c (objfile_symbol_add): Adjust.
5738 * symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
5739 (new_symfile_objfile): Likewise.
5740 (symbol_file_add_with_addrs_or_offsets): Likewise.
5741 (symbol_file_add_from_bfd): Likewise.
5742 (symbol_file_add): Likewise.
5743 * symfile.h (enum symfile_add_flags): New. Adjust prototypes.
5744 * symfile-mem.c (symbol_file_add_from_memory): Adjust.
5745 * windows-nat.c (safe_symbol_file_add_stub): Adjust.
5746 * machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
5748 2009-06-16 Keith Seitz <keiths@redhat.com>
5750 * linespec.c (collect_methods): Delete.
5751 (add_matching_methods): Reove destructor special case.
5752 (find_method): Call find_methods directly instead of
5754 * valops.c (value_struct_elt): Remove destructor
5756 (check_field): Likewise.
5757 (value_struct_elt_for_reference): Likewise.
5758 (destructor_name_p): Remove misleading comment about dtors
5759 being "special cases".
5760 * gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
5761 * gdbtypes.c (get_destructor_fn_field): Likewise.
5763 2009-06-16 Pedro Alves <pedro@codesourcery.com>
5765 * mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
5766 TARGET_OJECT_MEMORY reads to the topmost target, not to the
5767 flattened current_target.
5769 2009-06-16 Tristan Gingold <gingold@adacore.com>
5771 * avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
5773 (avr_register_name): Add const to register_names.
5774 (avr_scan_arg_moves): Move inside avr_scan_prologue.
5775 (avr_scan_prologue): Add pc_end argument.
5776 Only read prologue bytes that can be read.
5777 Limit the scan to the known prologue length.
5778 Makes pattern variables static and const.
5780 (avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
5782 (avr_breakpoint_from_pc): Constify avr_break_insn.
5783 (avr_extract_return_value): Fix function comment.
5784 (avr_frame_unwind_cache): Fix GNU style violations.
5785 Pass current_pc argument to avr_scan_prologue to stop prologue
5786 analysis to the current pc. This fixes the bug with the 'next'
5788 Correctly set the SP register of the previous frame (use call_length).
5789 (avr_frame_prev_register): Fix indentation.
5790 Correctly read PC from the stack on avr6 architectures.
5791 (avr_push_dummy_call): Fix indentation.
5792 (avr_gdbarch_init): Set call_length according to the architecture.
5794 2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
5796 * infcall.c (show_unwind_on_terminating_exception_p): New
5798 (call_function_by_hand): Create breakpoint and clean-up call for
5799 std::terminate.breakpoint. Add unwind_on_terminating_exception_p
5800 gate. Pop frame on breakpoint hit.
5801 (_initialize_infcall): Add add_setshow_boolean_cmd for
5802 unwind-on-terminating-exception.
5804 2009-06-12 Kevin Buettner <kevinb@redhat.com>
5806 * dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
5807 `has_section_at_zero' flag from stripped objfile to separate,
5808 debug info only, objfile.
5810 2009-06-12 Pedro Alves <pedro@codesourcery.com>
5812 * exec.h (section_table_xfer_memory_partial): Improve description,
5813 mention SECTION_NAME.
5814 * exec.c (section_table_xfer_memory_partial): Remove stale
5817 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5819 * nto-tdep.h (nto_generic_supply_gpregset)
5820 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
5821 * nto-tdep.c (nto_generic_supply_gpregset)
5822 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
5824 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5826 * i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
5827 (i386nto_sigcontext_addr): Change the way context address is calculated.
5828 (i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
5829 sc_sp_offset and set sc_reg_offset and sc_num_regs.
5831 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5833 * i386-nto-tdep.c (i386_nto_target): Remove definition.
5834 (init_i386nto_ops): Use macros to set fields to global
5835 current_nto_target directly.
5836 (i386nto_init_abi): Remove unused nto_set_target call.
5837 * nto-tdep.h (nto_set_target): Remove unused declaration.
5838 * nto-tdep.c (nto_set_target): Remove unused function.
5840 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5842 * breakpoint.c (break_command_really): Rename local variable
5843 breakpoint_chain to bkpt_chain.
5845 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5847 Add support for XMM registers.
5848 * i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
5849 (i386nto_register_area): Correctly calculate offsets and sizes for
5850 all supported registers.
5852 2009-06-11 Tom Tromey <tromey@redhat.com>
5854 * eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
5855 'static' from local variable definitions.
5857 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5859 * symtab.c (append_expanded_sal): Remove unused local variables.
5861 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5863 * infrun.c (sched_multi): New global.
5864 (resume): If sched_multi is set, resume only threads of the
5866 (prepare_to_proceed): Don't switch over to wait_ptid if we're
5867 resuming a different inferior, and sched_multi is off.
5868 (show_schedule_multiple): New.
5869 (_initialize_infrun): Register new "set schedule-multiple" command.
5870 * inferior.h (sched_multi): Declare.
5871 * NEWS: Mention new "schedule-multiple" setting.
5873 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5875 * varobj.c (varobj_create): Properly restore the selected frame.
5877 2009-06-05 Tom Tromey <tromey@redhat.com>
5879 * inferior.c (print_inferior): Make a table, not a list. Emit
5882 2009-06-10 Jonas Maebe <jonas.maebe@elis.ugent.be>
5884 * darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
5885 darwin_wait (blocking wait).
5886 (darwin_kill_inferior): Likewise.
5888 2009-06-10 Pedro Alves <pedro@codesourcery.com>
5890 * infrun.c (handle_inferior_event): Update comment around trying
5891 to revert back to a stepping thread that has exited.
5893 2009-06-10 Cary Coutant <ccoutant@google.com>
5895 * dwarf2read.c (dwarf_decode_lines): Recognize and ignore
5896 DW_LNE_set_discriminator.
5898 2009-06-10 Pierre Muller <muller@ics.u-strasbg.fr>
5900 * breakpoint.c: ARI fixes.
5901 (create_overlay_event_breakpoint): Avoid assignment inside if statement.
5902 (print_one_breakpoint_location): Likewise.
5903 (create_longjmp_breakpoint): Likewise.
5904 (tracepoint_save_command): Likewise
5905 (bpstat_find_step_resume_breakpoint): No operator at end of line.
5906 (bpstat_stop_status): Likewise.
5907 (describe_other_breakpoints): Likewise.
5908 (hw_watchpoint_used_count): Likewise.
5909 (expand_line_sal_maybe): Likewise.
5910 (break_command_really): Likewise.
5911 (delete_command): Likewise.
5912 (do_enable_breakpoint): Likewise.
5913 (delete_trace_command): Likewise.
5914 (catch_exception_command_1): Likewise and remove extra parentheses.
5916 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
5918 * breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
5919 "ubreak" command that does not exist.
5921 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
5923 * cli/cli-decode.c (add_alias_cmd): Correct assertion.
5925 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5927 * hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
5929 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5932 * proc-utils.h (procfs_first_available): Don't declare here.
5933 * sol-thread.c: Include procfs.h instead of sys/procfs.h and
5935 * procfs.c: Include procfs.h.
5936 (procfs_target): Make it public. Don't register
5937 procfs_can_use_hw_breakpoint here.
5938 (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
5939 defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
5940 (procfs_can_use_hw_breakpoint): Remove check of
5941 TARGET_HAS_HARDWARE_WATCHPOINTS.
5942 (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
5944 (_initialize_procfs): Don't add the procfs target here.
5946 * i386-sol2-nat.c: Include target.h and procfs.h.
5947 (_initialize_amd64_sol2_nat): Install the procfs target here,
5948 customized with watchpoints support.
5949 * irix5-nat.c: Include target.h.
5950 (_initialize_core_irix5): Rename to ...
5951 (_initialize_irix5_nat): ... this. Install the procfs target
5952 here, customized with watchpoints support.
5953 * alpha-nat.c: Include procfs.h.
5954 (_initialize_core_alpha): Rename to...
5955 (_initialize_alpha_nat): ... this. Install the procfs target
5956 here, customized with watchpoints support.
5957 * sparc-sol2-nat.c: Include target.h and procfs.h.
5958 (_initialize_sparc_sol2_nat): New.
5960 * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
5961 * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
5962 * config/mips/irix5.mh (NAT_FILE): Delete.
5963 * config/mips/irix6.mh (NAT_FILE): Delete.
5964 * config/mips/nm-irix5.h: Delete.
5966 20009-06-07 Pedro Alves <pedro@codesourcery.com>
5968 * auxv.c (procfs_xfer_auxv): Change type of the `object' argument
5969 to enum target_object. Cleanup comments.
5970 * auxv.h: Include "target.h". Cleanup comments to not mention
5971 NATIVE_XFER_AUXV anymore.
5973 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5975 * inferior.h (procfs_first_available): Move declaration to...
5976 * proc-utils.h: ... here.
5977 * sol-thread.c: Include procfs.h and proc-utils.h.
5979 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5981 * inferior.h (proc_iterate_over_mappings): Delete declaration.
5982 * nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
5983 * procfs.c (proc_iterate_over_mappings): Delete.
5985 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5987 * target.h (struct target_ops): Make to_has_all_memory,
5988 to_has_memory, to_has_stack, to_has_registers and to_has_execution
5989 methods instead of variables.
5990 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
5991 (target_has_registers_1, target_has_execution_1): Declare
5993 (target_has_all_memory): Rewrite to call target_has_all_memory_1.
5994 (target_has_memory): Rewrite to call target_has_memory_1.
5995 (target_has_stack): Rewrite to call target_has_all_stack_1.
5996 (target_has_registers): Rewrite to call target_has_registers_1.
5997 (target_has_execution): Rewrite to call target_has_execution_1.
5998 (default_child_has_all_memory, default_child_has_memory)
5999 (default_child_has_stack, default_child_has_registers)
6000 (default_child_has_execution): Declare.
6001 (target_mark_running, target_mark_exited): Delete declarations.
6002 * target.c (default_child_has_all_memory,
6003 default_child_has_memory, default_child_has_stack,
6004 default_child_has_registers, default_child_has_execution): New.
6005 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
6006 target_has_registers_1, target_has_execution_1): New.
6007 (add_target): Default the to_has_all_memory, to_has_all_memory,
6008 to_has_memory, to_has_stack, to_has_registers and to_has_execution
6009 callbacks to return 0.
6010 (update_current_target): Do not inherit to_has_all_memory,
6011 to_has_memory, to_has_stack, to_has_registers or to_has_execution.
6012 (target_mark_running, target_mark_exited): Delete.
6013 (memory_xfer_partial): Adjust.
6014 (target_read_memory, target_write_memory, target_search_memory):
6015 Dispatch to the the top-most target, not the flattened
6017 (target_info): Adjust.
6018 (init_dummy_target): Install return_zero as callback for
6019 to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
6021 (set_maintenance_target_async_permitted): Use have_live_inferiors
6022 instead of target_has_execution.
6023 * target-memory.c (target_write_memory_blocks): Dispatch memory
6024 writes to the the top-most target, not the flattened
6027 * breakpoint.c (insert_breakpoints): Don't check for
6028 target_has_execution here.
6029 (update_global_location_list): Check if there are live inferiors
6030 to debug instead of target_has_execution.
6031 * infcmd.c (kill_command, detach_command): Check if there are
6032 inferiors instead of target_has_execution.
6033 * inferior.h (have_live_inferiors): Declare.
6034 * inferior.c (have_live_inferiors): New.
6035 * infrun.c (normal_stop): Don't check for target_has_execution to
6036 finish the thread states.
6037 * thread.c (is_thread_state, is_stopped, is_exited, is_running)
6038 (any_running, is_executing): Remove checks for
6039 target_has_execution.
6040 * top.c (kill_or_detach): Don't try to kill core inferiors.
6041 (quit_target): Don't check for target_has_execution.
6043 * corelow.c (core_has_memory, core_has_stack, core_has_registers):
6045 (init_core_ops): Install core_has_memory, core_has_stack and
6047 * exec.c (exec_has_memory): New.
6048 (init_exec_ops): Install exec_has_memory.
6049 * remote.c (remote_add_inferior): Don't call target_mark_running.
6050 (remote_start_remote): Don't call target_mark_exited or call
6051 target_mark_running.
6052 (remote_open_1): Use have_inferiors instead of
6053 target_has_execution. Don't use target_mark_exited.
6054 (init_remote_ops): Install deafult_child_has_all_memory,
6055 default_child_has_memory, default_child_has_stack,
6056 default_child_has_registers, default_child_has_execution.
6057 * bsd-kvm.c (bsd_kvm_return_one): New.
6058 (bsd_kvm_add_target): Register bsd_kvm_return_one as
6059 to_has_memory, to_has_stack and to_has_registers callbacks.
6060 * remote-m32r-sdi.c (m32r_return_one): New.
6061 (init_m32r_ops): Register it.
6062 * inf-child.c (inf_child_target): Adjust to register
6063 default_child_has_all_memory, default_child_has_memory,
6064 default_child_has_stack, default_child_has_registers,
6065 default_child_has_execution callbacks.
6066 * gnu-nat.c (init_gnu_ops): Likewise.
6067 * go32-nat.c (init_go32_ops): Likewise.
6068 * hpux-thread.c (init_hpux_thread_ops): Likewise.
6069 * monitor.c (init_base_monitor_ops): Likewise.
6070 * nto-procfs.c (init_procfs_ops): Likewise.
6071 * remote-mips.c (_initialize_remote_mips): Likewise.
6072 * windows-nat.c (init_windows_ops): Likewise.
6073 * remote-sim.c (gdbsim_create_inferior): Don't use
6074 target_mark_running or target_mark_exited.
6075 (gdbsim_mourn_inferior): Don't call target_mark_exited.
6076 (init_gdbsim_ops): Adjust to register
6077 default_child_has_all_memory, default_child_has_memory,
6078 default_child_has_stack, default_child_has_registers,
6079 default_child_has_execution callbacks.
6081 * linux-nat.c (linux_nat_xfer_partial): If reading memory, and
6082 there's no inferior selected, defer to a lower stratum.
6084 2009-06-05 Tom Tromey <tromey@redhat.com>
6086 * varobj.c (update_dynamic_varobj_children): Wrap error text in
6088 (install_visualizer): Likewise.
6089 (varobj_set_visualizer): Likewise.
6091 2009-06-05 Marc Khouzam <marc.khouzam@ericsson.com>
6093 * mi/mi-main.c (mi_cmd_exec_continue)
6094 (mi_cmd_exec_interrupt): Adjust parsing of thread group
6095 ids to current reality, where they don't have any 'p' prefix.
6097 2009-06-05 Aleksandar Ristovski <aristovski@qnx.com>
6099 * corelow.c (core_open): Check for core_gdbarch before calling
6100 gdbarch_target_signal_from_host.
6102 2009-06-05 Tom Tromey <tromey@redhat.com>
6104 * c-exp.y (parse_number): Don't use K&R definition.
6106 (yyerror): Likewise.
6108 2009-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
6110 * varobj.c (varobj_update): Fix out of scope varobjs to not to change.
6112 2009-06-04 Ulrich Weigand <uweigand@de.ibm.com>
6114 * symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
6115 * ax-gdb.c (gen_var_ref): Likewise.
6116 * findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
6117 * printcmd.c (address_info): Likewise.
6118 * dwarf2loc.c (dwarf_expr_frame_base): Likewise.
6119 * dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
6120 * symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
6121 * dwarf2loc.h: Likewise.
6122 * dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.
6124 * symtab.h: (struct symbol_register_ops): New struct definition.
6125 (struct symbol): Make "ops" member a union of symbol_computed_ops and
6126 symbol_register_ops callback pointers.
6127 (SYMBOL_REGISTER_OPS): New macro.
6128 * tracepoint.c: Include "objfiles.h".
6129 (scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
6130 callback to retrieve register numbers.
6131 * ax-gdb.c (gen_var_ref): Likewise.
6132 * findvar.c (read_var_value): Likewise.
6133 * printcmd.c (address_info): Likewise.
6135 * coffread.c (coff_reg_to_regnum): New function.
6136 (coff_register_funcs): New static variable.
6137 (process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
6138 Install SYMBOL_REGISTER_OPS callbacks.
6139 * mdebugread.c (mdebug_reg_to_regnum): New function.
6140 (mdebug_register_funcs): New static variable.
6141 (parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
6142 Install SYMBOL_REGISTER_OPS callbacks.
6143 * stabsread.c (stab_reg_to_regnum): New function.
6144 (stab_register_funcs): New static variable.
6145 (define_symbol): Do not call gdbarch_stab_reg_to_regnum.
6146 Install SYMBOL_REGISTER_OPS callbacks.
6148 2009-06-03 Doug Evans <dje@google.com>
6150 * symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
6151 after discarding its contents.
6153 2009-06-03 Pedro Alves <pedro@codesourcery.com>
6155 * target.c: Include "exec.h".
6156 (update_current_target): Don't inherit to_sections or
6158 (target_get_section_table): New.
6159 (target_section_by_addr): Fetch the section table from the passed
6161 (memory_xfer_partial): Handle unmapped overlay sections before
6162 anything else. Get the overlay mapped address here. Adjust to
6163 use section_table_xfer_memory_partial.
6164 (get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
6165 instead of TARGET_OBJECT_MEMORY.
6166 (target_resize_to_sections): Delete.
6167 (remove_target_sections): Adjust to remove target sections from
6168 `current_target_sections', and use resize_section_table.
6169 * target.h (struct target_ops) <to_sections, to_sections_end>:
6171 <to_get_section_table>: New method.
6172 (xfer_memory, print_section_info): Delete declarations.
6173 (struct target_section_table): New type.
6174 (target_get_section_table): Declare.
6175 (target_resize_to_sections): Delete declaration.
6176 (remove_target_sections): Delete declaration.
6177 * bfd-target.c (target_bfd_xfer_partial): Get the section table
6179 (target_bfd_get_section_table): New.
6180 (target_bfd_xclose): Adjust.
6181 (target_bfd_reopen): Store the section table in the to_data field.
6182 * corelow.c (core_data): New.
6183 (core_close): Adjust to release core_data and its sections.
6184 (core_open): Allocate core_data, and build its target sections
6186 (deprecated_core_resize_section_table): New.
6187 (core_files_info): Pass core_data to print_section_info.
6188 (core_xfer_partial): Adjust to use
6189 section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
6190 (init_core_ops): Do not install a deprecated_xfer_memory callback
6192 * solib.c (update_solib_list): Add the shared library sections
6193 to the current target sections table.
6194 * exec.c (current_target_sections_1): New global.
6195 (current_target_sections): New global.
6196 (exec_close_1): New function, refactored from exec_close. Remove
6197 the exec_bfd's sections from the current target sections table.
6198 Adjust to not use to_sections.
6199 (exec_close): Remove all target sections. Call exec_close_1.
6200 (exec_file_clear): Use exec_close_1 instead of unpushing the
6202 (exec_file_attach): Likewise. Adjust to not use to_sections. Add
6203 exec_bfd's sections to the current target sections table. Don't
6204 push the exec_ops target here.
6205 (resize_section_table): New.
6206 (add_target_sections): New.
6207 (remove_target_sections): Moved here.
6208 (section_table_xfer_memory): Adjust to implement the xfer_partial
6209 interface, and rename to...
6210 (section_table_xfer_memory_partial): ... this, replacing the
6211 current function of that same name.
6212 (exec_get_section_table): New.
6213 (exec_xfer_partial): New.
6214 (xfer_memory): Delete.
6215 (print_section_info): Replace the target_ops parameter by a
6216 target_section_table parameter.
6217 (exec_files_info, set_section_command, exec_set_section_address):
6218 Adjust to use the current sections table.
6219 (init_exec_ops): Do not register a deprecated_xfer_memory
6220 callback. Register to_xfer_partial and to_get_section_table
6222 * infrun.c (handle_inferior_event): Update comments around
6224 * rs6000-nat.c (xcoff_relocate_core): Adjust to use
6225 deprecated_core_resize_section_table.
6226 * exec.h (resize_section_table): Declare.
6227 (section_table_xfer_memory_partial): Add const char * argument.
6228 (remove_target_sections): Declare here.
6229 (add_target_sections): Declare.
6230 (print_section_info): Declare here.
6231 * gdbcore.h (deprecated_core_resize_section_table): Declare.
6233 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6235 * value.h (struct internalvar): Remove.
6236 (get_internalvar_integer): Add prototype.
6237 (set_internalvar_integer): Add prototype.
6238 (clear_internalvar): Add prototype.
6240 * value.c (struct internalvar): Move here. Add type member. Remove
6241 endian member. Add union_internalvar member instead of value member.
6242 (init_if_undefined_command): Use intvar->type.
6243 (create_internalvar): Do not initialize value/endian, but type.
6244 (create_internalvar_type_lazy): Call create_internalvar.
6245 (value_of_internalvar): Handle host-side internalvar contents.
6246 (set_internalvar_component): Likewise.
6247 (set_internalvar): Likewise.
6248 (get_internalvar_integer): New function.
6249 (clear_internalvar): Likewise.
6250 (set_internalvar_integer): Likewise.
6251 (preserve_values): Handle host-side internalvar contents.
6253 * breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
6254 set_internalvar_integer instead of set_internalvar.
6255 * findcmd.c (find_command): Likewise.
6256 * infrun.c (handle_inferior_event): Likewise.
6257 * source.c (forward_search_command, reverse_search_command): Likewise.
6258 * tracepoint.c (set_traceframe_num, set_tracepoint_num,
6259 set_traceframe_context): Likewise.
6261 * printcmd.c (x_command): Call clear_internalvar instead of
6263 * tracepoint.c (set_traceframe_context): Likewise.
6265 * breakpoint.c (get_number_trailer): Call get_internalvar_integer
6266 instead of value_of_internalvar.
6267 * linespec.c (decode_dollar): Likewise.
6269 * expprint.c (dump_subexp_body_standard): Use internalvar_name
6270 instead of accessing internalvar private elements.
6271 * valops.c (value_assign): Copy from original source instead of
6272 accessing internalvar private elements.
6274 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6276 * scm-lang.c (builtin_type_scm): Remove.
6277 (scm_lookup_name): Add GDBARCH parameter. Use it instead of
6278 objfile architecture. Use per-architecture builtin_scm_type instead
6279 of builtin_type_scm.
6280 (evaluate_exp): Pass expression architecture to scm_lookup_name.
6282 (scm_get_field): Add SIZE parameter. Use it instead of
6283 TYPE_LENGTH (builtin_type_scm).
6285 (build_scm_types): New function.
6286 (scm_type_data): New variable.
6287 (builtin_scm_type): New function.
6288 (_initialize_scheme_language): Do not initialize builtin_type_scm.
6289 Register build_scm_types as post-init function for scm_type_data.
6291 * scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
6292 instead of builtin_type_scm.
6294 * scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
6295 (scm_get_field): Add SIZE paramter.
6296 (scm_scmval_print): Remove prototype.
6297 (builtin_type_scm): Remove.
6298 (struct builtin_scm_type): Add structure definition.
6299 (builtin_scm_type): Add prototype.
6301 * scm-valprint.c (scm_inferior_print): Add TYPE parameter. Use it
6302 instead of builtin_core_addr type; do not use objfile architecture.
6303 (scm_scmlist_print): Add TYPE parameter. Use it to define SCM_SIZE.
6304 Pass type to scm_scmval_print.
6305 (scm_ipruk): Add TYPE parameter. Use it to define SCM_SIZE.
6306 (scm_scmval_print): Make static. Add TYPE parameter. Use it to
6307 define SCM_SIZE. Pass type to scm_ipruk and scm_scmlist_print.
6308 (scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.
6310 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6312 * mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
6313 mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
6314 mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
6315 mdebug_type_unsigned_char, mdebug_type_unsigned_short,
6316 mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
6317 mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
6318 mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
6319 mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
6320 mdebug_type_complex, mdebug_type_double_complex,
6321 mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
6324 (basic_type_data): New global variable.
6325 (basic_type): New function.
6326 (parse_type): Remove static basic type map map_bt. Call basic_type
6327 to get basic types instead of using mdebug_type_ variables.
6329 (parse_symbol): Use builtin types instead of mdebug_type_ variables.
6330 (upgrade_type): Likewise.
6331 (parse_procedure): Likewise.
6332 (psymtab_to_symtab_1): Likewise.
6334 (_initialize_mdebugread): Do not initialize mdebug_type_ variables.
6335 Initialize basic_type_data.
6337 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6339 * dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
6340 * dfp.c (promote_decimal): Remove.
6341 (decimal_binop): Convert LEN_RESULT to input parameter.
6342 Remove call to decimal_binop.
6343 (decimal_compare): Remove call to decimal_binop.
6345 * valarith.c (value_binop): Pass desired result type length
6348 2009-06-01 Tristan Gingold <gingold@adacore.com>
6350 * configure.tgt (avr): Set gdb_sim to use the simulator.
6352 2009-05-29 Doug Evans <dje@google.com>
6354 * infrun.c (prepare_to_proceed): Document. Assert !non_stop.
6355 If scheduler-locking is enabled, we're not going to be singlestepping
6356 any other previously stopped thread.
6358 2009-05-29 Pedro Alves <pedro@codesourcery.com>
6360 * mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.
6362 2009-05-29 Eli Zaretskii <eliz@gnu.org>
6364 * i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
6365 for stabs and COFF debug info.
6367 2009-05-28 Pedro Alves <pedro@codesourcery.com>
6369 * infrun.c (handle_inferior_event): When thread hoping, switch
6370 inferior_ptid to the event thread before removing breakpoints from
6371 the target. If not stopping, also try to revert back to a thread
6372 that was doing a "next". Check if that thread still exists before
6374 (currently_stepping_thread): Delete and merge with ...
6375 (currently_stepping): ... this.
6376 (currently_stepping_callback): Rename to ...
6377 (currently_stepping_or_nexting_callback): ... this, and also
6378 return true if the thread was stepping over a call (has a
6379 step-resume breakpoint).
6381 2009-05-28 Tom Tromey <tromey@redhat.com>
6383 * python/python.c (gdbpy_parameter): Rename. Fix error message.
6384 (GdbMethods): Change "get_parameter" to "parameter".
6386 2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
6387 Paul Pluzhnikov <ppluzhnikov@google.com>
6389 * configure.ac (!have_libpython): Add python-prettyprint source
6391 * configure: Regenerate.
6392 * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
6395 2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
6396 Tom Tromey <tromey@redhat.com>
6397 Thiago Jung Bauermann <bauerman@br.ibm.com>
6399 * mi/mi-main.c (mi_cmd_list_features): List "python" feature.
6400 * varobj.h (varobj_set_visualizer): Declare.
6401 (varobj_get_display_hint): Likewise.
6402 (varobj_update_result_t) <children_changed, value_installed>: New
6404 * mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
6405 * mi/mi-cmds.h (mi_cmd_var_set_visualizer,
6406 mi_cmd_var_set_child_range): Declare.
6407 * mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
6408 (mi_cmd_var_list_children): Emit display hint.
6409 (varobj_update_one): Emit display hint. Handle dynamic children.
6410 * python/python.c (GdbMethods): Add "default_visualizer".
6411 * python/python-internal.h (apply_varobj_pretty_printer,
6412 gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
6414 (gdbpy_default_visualizer): Likewise.
6415 * varobj.c: Include python.h, python-internal.h.
6416 (PyObject): New typedef.
6417 (struct varobj) <children_requested, pretty_printer>: New fields.
6418 (varobj_create): Call install_default_visualizer.
6419 (instantiate_pretty_printer): New function.
6420 (varobj_set_display_format): Update.
6421 (varobj_get_display_hint): New function.
6422 (update_dynamic_varobj_children): New function.
6423 (varobj_get_num_children): Handle dynamic children.
6424 (varobj_list_children): Likewise.
6425 (install_new_value): Likewise.
6426 (varobj_add_child): New function.
6427 (install_visualizer): Likewise.
6428 (install_default_visualizer): Likewise.
6429 (varobj_set_visualizer): Likewise.
6430 (varobj_update): Handle dynamic children.
6431 (create_child): Use create_child_with_value.
6432 (create_child_with_value): New function.
6433 (value_get_print_value): Call pretty printer. Add value_formatter
6435 (c_value_of_variable): Update.
6436 (varobj_invalidate): Always free all_rootvarobj.
6437 * python/python-prettyprint.c (apply_varobj_pretty_printer): New
6439 (gdbpy_get_varobj_pretty_printer): Likewise.
6440 (gdbpy_default_visualizer): Likewise.
6442 2009-05-27 Tom Tromey <tromey@redhat.com>
6443 Thiago Jung Bauermann <bauerman@br.ibm.com>
6444 Phil Muldoon <pmuldoon@redhat.com>
6445 Paul Pluzhnikov <ppluzhnikov@google.com>
6446 Vladimir Prus <vladimir@codesourcery.com>
6448 * python/python-value.c (value_object_to_value): New function.
6449 * python/python-internal.h: Include frameobject.h.
6450 (gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
6452 (value_object_to_value): Declare.
6453 * printcmd.c (struct format_data) <raw>: New field.
6454 (last_format): Default to 0.
6455 (decode_format): Initialize val.raw. Handle /r flag.
6456 (print_command_1): Initialize fmt.raw and opts.raw.
6457 (output_command): Likewise.
6458 (x_command): Fix initialization of fmt.format. Initialize
6460 (display_command): Initialize fmt.raw.
6461 (do_one_display): Set opts.raw.
6462 * python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
6463 gdbpy_display_hint_cst): New globals.
6464 (_initialize_python): Initialize them. Set gdb.pretty_printers.
6465 * cp-valprint.c: Include python.h.
6466 (cp_print_value): Call apply_val_pretty_printer.
6467 * python/python.h (apply_val_pretty_printer): Declare.
6468 * stack.c (print_this_frame_argument_p): Remove.
6469 (print_frame_args): Compute summary flag. Don't use
6470 print_this_frame_argument_p.
6471 * valprint.c: Include python.h.
6472 (user_print_options): Initialize new fields.
6473 (scalar_type_p): New function.
6474 (val_print): Handle 'raw' and 'summary' modes. Call
6475 apply_val_pretty_printer.
6476 (value_print): Handle 'raw' mode.
6477 * valprint.h (struct value_print_options) <raw, summary>: New
6479 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
6480 (SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
6481 (python-prettyprint.o): New target.
6482 * python/python-prettyprint.c: New file.
6484 2009-05-27 Tom Tromey <tromey@redhat.com>
6485 Paul Pluzhnikov <ppluzhnikov@google.com>
6487 * mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
6489 * cli/cli-dump.c (dump_value_to_file): Use value_address.
6490 * valprint.c (common_val_print): Likewise.
6491 * v850-tdep.c (v850_push_dummy_call): Use value_address.
6492 * tracepoint.c (encode_actions): Use value_address.
6493 * printcmd.c (print_formatted): Use value_address.
6494 (x_command): Likewise.
6495 * p-valprint.c (pascal_object_print_static_field): Use
6497 * mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
6498 * mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
6499 * m32r-tdep.c (m32r_push_dummy_call): Use value_address.
6500 * jv-valprint.c (java_value_print): Use value_address.
6501 * infcall.c (find_function_addr): Use value_address.
6502 * gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
6503 * gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
6504 * frv-tdep.c (frv_push_dummy_call): Use value_address.
6505 * frame.c (frame_register_unwind): Use value_address.
6506 (frame_unwind_register_value): Likewise.
6507 * darwin-nat-info.c (info_mach_region_command): Use
6509 * cp-valprint.c (cp_print_static_field): Use value_address.
6510 * c-valprint.c (c_value_print): Use value_address.
6511 * breakpoint.c (update_watchpoint): Use value_address.
6512 (can_use_hardware_watchpoint): Likewise.
6513 * ada-valprint.c (ada_val_print_1): Use value_address.
6514 (ada_value_print): Likewise.
6515 * ada-tasks.c (read_fat_string_value): Use value_address.
6516 * jv-lang.c (java_link_class_type): Use set_value_address.
6517 (java_link_class_type): Likewise.
6518 (get_java_utf8_name): Use value_address.
6519 (type_from_class): Likewise.
6520 (java_link_class_type): Likewise.
6521 * findvar.c (value_of_register): Use set_value_address.
6522 (read_var_value): Likewise.
6523 (read_var_value): Likewise.
6524 * eval.c (evaluate_subexp_standard): Use set_value_address.
6525 (evaluate_subexp_standard): Use value_address.
6526 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
6527 * ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
6528 (ada_value_primitive_packed_val): Likewise.
6529 (ensure_lval): Likewise.
6530 (thin_data_pntr): Use value_address.
6531 (desc_bounds): Likewise.
6532 (ada_value_primitive_packed_val): Likewise.
6533 (value_assign_to_component): Likewise.
6534 (ensure_lval): Likewise.
6535 (make_array_descriptor): Likewise.
6536 (ada_to_fixed_value): Likewise.
6537 (unwrap_value): Likewise.
6538 * value.c (deprecated_value_address_hack): Remove.
6539 (value_address): New function.
6540 (value_raw_address): Likewise.
6541 (set_value_address): Likewise.
6542 (value_fn_field): Use set_value_address.
6543 (value_from_contents_and_address): Likewise.
6544 (value_fn_field): Likewise.
6545 (allocate_value_lazy): Don't use VALUE_ADDRESS.
6546 (value_as_address): Use value_address.
6547 (value_static_field): Likewise.
6548 * valops.c (search_struct_field): Use set_value_address.
6549 (value_at): Likewise.
6550 (value_at_lazy): Likewise.
6551 (value_repeat): Likewise.
6552 (value_cast_structs): Use value_address.
6553 (value_cast): Likewise.
6554 (value_fetch_lazy): Likewise.
6555 (value_assign): Likewise.
6556 (value_repeat): Likewise.
6557 (address_of_variable): Likewise.
6558 (value_coerce_array): Likewise.
6559 (value_coerce_function): Likewise.
6560 (value_addr): Likewise.
6561 (search_struct_field): Likewise.
6562 (search_struct_method): Likewise.
6563 (find_method_list): Likewise.
6564 (value_struct_elt_for_reference): Likewise.
6565 (value_full_object): Likewise.
6566 * jv-valprint.c (java_value_print): Use set_value_address.
6567 * value.h (deprecated_value_address_hack): Remove.
6568 (VALUE_ADDRESS): Remove.
6569 (value_address): Declare.
6570 (value_raw_address): Declare.
6571 (set_value_address): Declare.
6573 2009-05-27 Tom Tromey <tromey@redhat.com>
6574 Thiago Jung Bauermann <bauerman@br.ibm.com>
6575 Phil Muldoon <pmuldoon@redhat.com>
6576 Paul Pluzhnikov <ppluzhnikov@google.com>
6578 * python/python.c (_initialize_python): Call
6579 gdbpy_initialize_types.
6580 (GdbMethods): Add "lookup_type".
6581 * python/python-value.c (value_object) <type>: New field.
6582 (valpy_dealloc): Decref type.
6583 (valpy_new): Initialize type.
6584 (valpy_get_type): New function.
6585 (value_to_value_object): Initialize type.
6586 (valpy_cast): New function.
6587 (value_object_getset): Add "type".
6588 (value_object_methods): Add "cast".
6589 * python/python-internal.h (type_to_type_object): Declare.
6590 (type_object_to_type): Likewise.
6591 (gdbpy_initialize_types): Likewise.
6592 (gdbpy_lookup_type): Declare.
6593 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
6594 (SUBDIR_PYTHON_SRCS): Add python-type.c.
6595 (python-type.o): New target.
6596 * python/python-type.c: New file.
6598 2009-05-27 Tom Tromey <tromey@redhat.com>
6599 Thiago Jung Bauermann <bauerman@br.ibm.com>
6600 Phil Muldoon <pmuldoon@redhat.com>
6602 * python/python.c: Include objfiles.h, observer.h.
6603 (gdbpy_auto_load): New global.
6604 (gdbpy_current_objfile): Likewise.
6605 (GDBPY_AUTO_FILENAME): New define.
6606 (gdbpy_new_objfile): New function.
6607 (gdbpy_get_current_objfile): Likewise.
6608 (gdbpy_objfiles): Likewise.
6609 (_initialize_python): Add "maint set auto-load". Call
6610 gdbpy_initialize_objfile. Attach objfile observer.
6611 (GdbMethods): New methods current_objfile, objfiles.
6612 * python/python-objfile.c: New file.
6613 * python/python-internal.h (objfile_to_objfile_object): Declare.
6614 (objfpy_get_printers): Likewise.
6615 (gdbpy_initialize_objfile): Likewise.
6616 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
6617 (SUBDIR_PYTHON_SRCS): Add python-objfile.c.
6618 (python-objfile.o): New target.
6620 2009-05-27 Pedro Alves <pedro@codesourcery.com>
6622 * infrun.c (follow_exec): Clear the stop_requested flag.
6623 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
6626 2009-05-27 Aleksandar Ristovski <aristovski@qnx.com>
6628 * nto-procfs.c (get_regset): Pass correct pointer.
6630 2009-05-26 Doug Evans <dje@google.com>
6632 * dwarf2read.c (follow_die_ref): Add comment.
6633 (dwarf2_mark_helper): Tweak comment.
6634 (dwarf2_mark): Move description to its proper place.
6636 2009-05-25 Pierre Muller <muller@ics.u-strasbg.fr>
6638 * procfs.c (procfs_wait): Add options parameter.
6640 2009-05-24 Doug Evans <dje@google.com>
6642 Global renaming of find_thread_pid to find_thread_ptid.
6643 * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
6644 * thread.c (find_thread_ptid): Renamed from find_thread_pid.
6645 All callers updated.
6647 * infrun.c (follow_fork): Initialize new step_* locals
6648 to avoid "may be used uninitialized" warnings.
6650 2009-05-24 Pedro Alves <pedro@codesourcery.com>
6652 * inflow.c (copy_terminal_info): Deep copy `run_terminal'.
6654 2009-05-24 Pedro Alves <pedro@codesourcery.com>
6656 * gdbthread.h (struct thread_info): New `pending_follow' field.
6657 * thread.c (new_thread): New function.
6658 (add_thread_silent): Use it.
6659 * breakpoint.c (internal_breakpoint_number): New global, moved
6661 (create_internal_breakpoint): ... this.
6662 (clone_momentary_breakpoint): New.
6663 * breakpoint.h (clone_momentary_breakpoint): Declare.
6664 * infrun.c (nullify_last_target_wait_ptid): Move declaration
6666 (pending_follow): Delete.
6667 (follow_fork): Handle pending follow fork event here. Moved the
6668 preserving of thread stepping state here.
6669 (resume): Don't handle pending follow fork events here. Only
6670 install the inferior's terminal modes if we're about to resume it.
6671 (proceed): Handle possible pending follow fork events here.
6672 (init_wait_for_inferior): No need to clear pending_follow anymore,
6674 (handle_inferior_event): Adjust to per-thread `pending_follow'.
6675 Call `follow_fork' to handle following the fork. If the
6676 follow-fork is cancelled, stop stepping.
6677 * linux-nat.c (linux_child_follow_fork): Adjust to per-thread
6678 `pending_follow' events. Remove code that handled preserving the
6679 thread stepping state.
6680 * inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
6681 * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
6683 2009-05-24 Pierre Muller <muller@ics.u-strasbg.fr>
6685 * symfile.c (add_shared_symbol_files_command): Remove
6686 prototype and function.
6687 (_initialize _symfile): Move "add-shared-symbol-files"
6688 command and "assf" alias.
6689 * windows-nat.c (_initialize_windows_nat): to here.
6690 Change "add-shared-symbol-files" to alias.
6692 * config/i386/cygwin.mh: Remove NAT_FILE.
6693 * config/i386/mingw.mh: Remove NAT_FILE.
6694 * config/i386/mingw64.mh: Remove NAT_FILE.
6695 * config/i386/nm-cygwin.h: Remove file.
6696 * config/i386/nm-cygwin64.h: Remove file.
6698 2009-05-24 Hui Zhu <teawater@gmail.com>
6700 * i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
6701 I386_LINUX_RECORD_IOCTL_*,
6702 I386_LINUX_RECORD_FCNTL_*) Removed.
6703 (i386_linux_init_abi): Change size of record from macros to
6706 2009-05-24 Hui Zhu <teawater@gmail.com>
6708 * i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
6709 * linux-record.c (record_linux_system_call): Ditto.
6710 * linux-record.h (linux_record_tdep): Ditto.
6712 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
6714 Replace the savestring calls by xstrdup calls where possible.
6715 * breakpoint.c (condition_command, set_raw_breakpoint)
6716 (create_catchpoint, update_breakpoint_locations): Replace the
6717 savestring calls by xstrdup calls where possible.
6718 * buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
6719 (record_producer): Likewise.
6720 * coffread.c (coff_start_symtab, complete_symtab): Likewise.
6721 * corefile.c (set_gnutarget): Likewise.
6722 * dbxread.c (add_new_header_file): Likewise.
6723 * demangle.c (set_demangling_command, set_demangling_style): Likewise.
6724 * event-top.c (push_prompt, pop_prompt, command_line_handler)
6725 (set_async_prompt): Likewise.
6726 * infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
6728 * language.c (set_language_command, _initialize_language): Likewise.
6729 * linespec.c (decode_line_2): Likewise.
6730 * rs6000-nat.c (add_vmap): Likewise.
6731 * top.c (set_prompt, init_history, init_main): Likewise.
6732 * tracepoint.c (stringify_collection_list): Likewise.
6733 * varobj.c (varobj_create): Remove variable expr_len. Replace the
6734 savestring calls by xstrdup calls where possible.
6735 (value_of_root, c_name_of_variable, c_describe_child): Replace the
6736 savestring calls by xstrdup calls where possible.
6737 * xcoffread.c (complete_symtab): Likewise.
6738 * cli/cli-script.c (build_command_line, define_command): Likewise.
6739 * cli/cli-setshow.c (do_setshow_command): Likewise.
6741 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
6743 Remove already unreachable code.
6744 * varobj.c (varobj_get_handle): Fix comment when error is called.
6745 All callers updated.
6747 2009-05-23 Eli Zaretskii <eliz@gnu.org>
6749 * README (`configure' options): Document GDB-specific options to
6752 * symtab.c (skip_prologue_using_lineinfo): New function.
6753 (find_function_start_sal): Use it to get to the first line of
6754 function's body that has an entry in the lineinfo table.
6756 * symmisc.c (dump_symtab): Switch the current language to
6757 the language of the symtab we are dumping only if the symtab's
6758 language is neither language_auto nor language_unknown.
6760 * coffread.c (coff_symtab_read): Set language_minimal as the
6761 language for the "_globals_" pseudo-file.
6762 (process_coff_symbol): Set the symbol's language to the language
6765 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6767 * target.h (struct section_table): Rename to ...
6768 (struct target_section): ... this.
6769 * exec.c: Adjust all references.
6770 * exec.h: Adjust all references.
6771 * nto-tdep.c: Adjust all references.
6772 * nto-tdep.h: Adjust all references.
6773 * ppc-linux-tdep.c: Adjust all references.
6774 * rs6000-nat.c: Adjust all references.
6775 * s390-tdep.c: Adjust all references.
6776 * solib-darwin.c: Adjust all references.
6777 * solib-frv.c: Adjust all references.
6778 * solib-irix.c: Adjust all references.
6779 * solib-null.c: Adjust all references.
6780 * solib-osf.c: Adjust all references.
6781 * solib-pa64.c: Adjust all references.
6782 * solib-som.c: Adjust all references.
6783 * solib-sunos.c: Adjust all references.
6784 * solib-svr4.c: Adjust all references.
6785 * solib-target.c: Adjust all references.
6786 * solib.c: Adjust all references.
6787 * solist.h: Adjust all references.
6788 * symfile.c: Adjust all references.
6789 * symfile.h: Adjust all references.
6790 * target.c: Adjust all references.
6792 2009-05-22 Hui Zhu <teawater@gmail.com>
6794 Add sys_fcntl argument interfaces to linux_record_tdep.
6796 * linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
6797 fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
6799 * i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
6800 I386_LINUX_RECORD_FCNTL_F_GETLK64,
6801 I386_LINUX_RECORD_FCNTL_F_SETLK64,
6802 I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
6803 of I386 Linux sys_fcntl arguments.
6804 (i386_linux_init_abi): Set macros values to linux_record_tdep.
6805 * linux-record.c (record_linux_system_call): Change to use
6806 the interface in linux_record_tdep in sys_fcntl and
6809 * linux-record.c (record_linux_system_call): Fix the process
6810 record build error about type in CYGWIN.
6812 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6814 * inflow.c (kill_command): Delete left over static declaration.
6816 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6818 * bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
6820 (struct section_closure): Delete.
6821 (add_to_section_table): Delete.
6822 (build_target_sections_from_bfd): Delete.
6823 (target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
6824 (target_bfd_reopen): Use build_section_table.
6825 * exec.c (xfer_memory): Move most code except for overlay
6826 debugging support from here...
6827 (section_table_xfer_memory): ... to this new function.
6828 (section_table_xfer_memory_partial): New.
6829 * exec.h (section_table_xfer_memory_partial): Declare.
6830 * bfd-target.h (build_target_sections_from_bfd): Delete
6833 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6835 * remote.c (compare_sections_command): Don't declare exec_bfd.
6836 * tracepoint.c: Include "gdbcore.h".
6837 (remote_set_transparent_ranges): Don't declare exec_bfd.
6839 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6841 * aix-thread.c (init_aix_thread_ops): Whitespace.
6843 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6845 * dec-thread.c (dec_thread_wait): Add options parameter. Use it
6846 to call the to_wait method in the target beneath.
6847 * remote-m32r-sdi.c (m32r_wait): Add options parameter.
6849 2009-05-21 Joel Brobecker <brobecker@adacore.com>
6851 * aix-thread.c (aix_thread_wait): Add options parameter. Use it
6852 to call the to_wait method in the target_beneath.
6854 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6856 * linux-nat.c (linux_nat_terminal_inferior)
6857 (linux_nat_terminal_ours): Don't check sync_execution.
6858 * remote.c (remote_terminal_inferior, remote_terminal_ours):
6859 Don't check sync_execution. Update comments.
6860 * target.c (target_terminal_inferior): New.
6861 * target.h (target_terminal_inferior): Delete macro, and declare
6863 * event-top.c (async_disable_stdin): Make idempotent. Don't give
6864 the target the terminal here.
6865 * inflow.c (terminal_ours_1): Don't return early without setting
6868 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6870 * target.h (TARGET_WNOHANG): New.
6871 * target.c (target_wait): Add `options' argument. Adjust.
6872 (struct target_ops) <to_wait>: Add `options' argument.
6873 (target_wait): Add `options' argument.
6874 * infrun.c (wait_for_inferior): Pass 0 as options to
6875 target_wait (blocking wait).
6876 (fetch_inferior_event): Pass TARGET_WNOHANG as options to
6878 * fork-child.c (startup_inferior): Pass 0 as options to
6879 target_wait (blocking wait).
6880 * linux-nat.c (linux_nat_create_inferior): Remove async masking.
6881 (linux_nat_wait_1): Add `target_options' argument. Use it instead
6882 of checking on target_can_async_p.
6883 (linux_nat_wait): Add `target_options' argument. Adjust.
6884 * remote.c (remote_wait_ns): Add `options' argument. Adjust to
6885 check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
6886 (remote_wait_as): Add `options' argument. Adjust to check on
6887 TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
6888 a blocking wait, keep waiting until an interesting event comes
6890 (remote_wait): Add `options' argument. Don't loop here if the
6891 target is in async mode, and a blocking wait has been requested.
6893 * top.c (deprecated_target_wait_hook): Add `options' argument.
6894 * linux-thread-db.c (thread_db_wait): Add `options' argument, and
6895 pass it down to the layer beneath.
6896 * inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
6897 * record.c (record_beneath_to_wait): Add `options' argument.
6898 (record_wait): Add `options' argument, and pass it down to the
6900 * bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
6901 * darwin-nat.c (darwin_wait): Likewise.
6902 * defs.h (deprecated_target_wait_hook): Likewise.
6903 * gnu-nat.c (gnu_wait): Add `options' argument.
6904 * go32-nat.c (go32_wait): Likewise.
6905 * hpux-thread.c (hpux_thread_wait): Add `options' argument, and
6906 pass it down to the layer beneath.
6907 * inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
6908 * monitor.c (monitor_wait): Likewise.
6909 * nto-procfs.c (procfs_wait): Likewise.
6910 * remote-mips.c (mips_wait): Add `options' argument.
6911 * remote-sim.c (gdbsim_wait): Likewise.
6912 * rs6000-nat.c (rs6000_wait): Add `options' argument.
6913 * sol-thread.c (sol_thread_wait): Add `options' argument, and pass
6914 it down to the layer beneath.
6915 * spu-linux-nat.c (spu_child_wait): Add `options' argument.
6916 * windows-nat.c (windows_wait): Likewise.
6917 * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
6919 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6921 * mi/mi-interp.c (mi_on_resume): Account for whole process
6924 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6926 * m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.
6928 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6930 * dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.
6932 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6934 Fix parsing DW_AT_const_value using DW_FORM_string.
6935 * dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.
6937 2009-05-20 Joel Brobecker <brobecker@adacore.com>
6939 * aix-thread.c (giter_count): Do not count the main thread.
6940 (giter_accum): Do not include the main thread.
6942 2009-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
6944 Remove the PROT parameter from openp.
6945 * source.c (openp): Remove the parameter PROT. Assertion check MODE.
6946 defs.h (openp): Update the prototype.
6947 Update all the openp callers.
6949 2009-05-19 Pedro Alves <pedro@codesourcery.com>
6951 * inflow.c (kill_command): Moved to infcmd.c.
6952 (_initialize_inflow): Don't add the "kill" command or clear
6954 * infcmd.c (kill_command): Moved here from inflow.c.
6955 (_initialize_infcmd): Add the "kill" command here.
6957 2009-05-19 Pedro Alves <pedro@codesourcery.com>
6959 * fork-child.c: Don't include frame.h. Include terminal.h.
6960 (fork_inferior): Call new_tty_postfork after forking adn adding
6961 the child to the inferior list.
6962 * inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
6964 * inflow.c (struct terminal_info): Remove const qualifier from
6965 `run_terminal' field.
6966 (inferior_thisrun_terminal): Tweak comment.
6967 (inflow_inferior_exit): Release the `run_terminal' field.
6968 (copy_terminal_info): New function.
6969 (new_tty_postfork): New function.
6970 * terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
6971 (copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
6972 * inf-ptrace.c: Include terminal.h.
6973 (inf_ptrace_follow_fork): Copy the parent's terminal info to the
6975 * linux-nat.c: Include terminal.h.
6976 (linux_child_follow_fork): Copy the parent's terminal info to the
6978 * inf-ttrace.c: Include terminal.h.
6979 (inf_ttrace_follow_fork): Copy the parent's terminal info to the
6982 2009-05-19 Pedro Alves <pedro@codesourcery.com>
6984 * breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
6985 (update_global_location_list): Use gdbarch_has_global_breakpoints
6986 instead of gdbarch_has_global_solist and
6987 target_supports_multi_process.
6988 * dicos-tdep.c (dicos_init_abi): Set
6989 gdbarch_has_global_breakpoints.
6990 * gdbarch.sh (has_global_solist): Update comment.
6991 (has_global_breakpoints): New.
6992 * remote.c (remote_start_remote): Use
6993 gdbarch_has_global_breakpoints instead of
6994 gdbarch_has_global_solist.
6995 * target.c (target_detach): Use gdbarch_has_global_breakpoints
6996 instead of gdbarch_has_global_solist.
6997 * infcmd.c (attach_command): Use gdbarch_has_global_solist instead
6998 of target_supports_multi_process.
7000 2009-05-18 Paul Pluzhnikov <ppluzhnikov@google.com>
7002 * objc-lang.c (find_methods): Plug a small memory leak.
7004 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7006 * solib-svr4.c: Include observer.h.
7007 (debug_base, debug_loader_offset_p, debug_loader_offset)
7008 (debug_loader_name, main_lm_addr): Move these globals...
7009 (struct svr4_info): ... into this new structure.
7010 (svr4_info_p): New typedef.
7011 (svr4_info): New global.
7012 (get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
7014 (locate_base, solib_svr4_r_map, solib_svr4_r_brk)
7015 (solib_svr4_r_ldsomap): Add svr4_info argument. Adjust to
7017 (open_symbol_file_object): Adjust to per-inferior svr4.
7018 (svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
7020 (enable_break): Add svr4_info argument. Adjust to per-inferior
7022 (enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
7023 Adjust to per-inferior svr4.
7024 (_initialize_svr4_solib): Install the solib_svr4_inferior_exit
7027 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7029 * linux-nat.h (linux_proc_get_tgid): Declare.
7030 * linux-nat.c (linux_proc_get_tgid): New.
7031 * linux-thread-db.c (struct thread_db_info): New field
7032 `need_stale_parent_threads_check'.
7033 (add_thread_db_info): Set it.
7034 (find_new_threads_callback): Ignore stale fork parent threads.
7035 (thread_db_resume): New.
7036 (init_thread_db_ops): Install thread_db_resume.
7038 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7040 * fork-child.c (fork_inferior): Only reset the thread list if this
7041 is the first inferior.
7042 (startup_inferior): If the target support multi-process, tell it
7043 to resume only the new process.
7044 * linux-nat.c (num_lwps): Delete global.
7045 (purge_lwp_list): New function.
7046 (num_lwps): New function.
7047 (add_lwp, delete_lwp): Adjust.
7049 (iterate_over_lwps): Add filter argument. Handle it.
7050 (linux_nat_attach): Remove FIXME note.
7051 (linux_nat_detach): Adjust to iterate over threads of the inferior
7052 we're detaching from. Adjust to num_lwps being a function. Don't
7053 assume the head of the lwp list is the main thread of the process
7054 we're detaching from. Don't destroy the LWP list.
7055 (resume_callback): Add debug output.
7056 (linux_nat_resume): Handle resuming a single inferior. Allow a
7057 wildcard resume in non-stop mode.
7058 (linux_handle_extended_wait): Don't assume inferior_ptid is the
7059 correct inferior of the parent LWP.
7060 (status_callback): Also check lp->waitstatus.
7061 (select_event_lwp): Add new filter parameter. Handle it.
7062 (linux_nat_filter_event): Adjust to num_lwps being a function.
7063 (linux_nat_wait_1): When adding the first lwp of the inferior, use
7064 an is_lwp check instead of checking for the number of lwps.
7065 (linux_nat_wait_1): Handle waiting for a specific tgid. Handle
7066 pending process exit statuses.
7067 (linux_nat_mourn_inferior): Don't destroy all the LWP info.
7068 Instead delete LWPs of the inferior that we're mourning. Don't
7069 unregister from the event loop here.
7070 (linux_nat_pid_to_str): Use `num_lwps'.
7071 (linux_nat_make_corefile_notes): Adjust to walk over lwps of a
7073 (linux_nat_is_async_p): Check if async was masked out.
7074 (linux_multi_process): New global.
7075 (linux_nat_supports_multi_process): New.
7076 (linux_nat_stop_lwp): Remove LWP filtering. It is done by the
7078 (linux_nat_stop): Adjust to make iterate_over_lwps itself do the
7080 (linux_nat_close): New.
7081 (linux_nat_add_target): Register linux_nat_close and
7082 linux_nat_supports_multi_process.
7083 * linux-nat.h (iterate_over_lwps): Add filter argument.
7084 * linux-thread-db.c (thread_db_handle): Delete.
7085 (proc_handle, thread_agent, td_init_p, td_ta_new_p)
7086 (td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
7087 (td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
7088 (td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
7089 (td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
7090 longer globals, moved to...
7091 (struct thread_db_info): ... this new structure.
7092 (thread_db_list): New.
7093 (add_thread_db_info, get_thread_db_info, delete_thread_db_info):
7095 (have_threads_callback): Filter out threads of all inferiors but
7096 the one specified by the ARGS argument.
7097 (have_threads): Add ptid argument specifying the inferior we're
7098 interested in. Handle it.
7099 (struct thread_get_info_inout): New.
7100 (thread_get_info_callback, thread_from_lwp): Adjust to use it.
7101 (thread_db_attach_lwp): Check that inferior of the passed in
7102 thread is using thread-db. Adjust.
7103 (enable_thread_event): Remove thread_agent parameter. Instead,
7104 get it from the per-inferior thread-db info.
7105 (dladdr_to_soname): Move higher up.
7106 (enable_thread_event_reporting): Adjust to use per-inferior
7108 (try_thread_db_load_1): Replace `handle' parameter by a
7109 thread_db_info parameter. Adjust to use per-inferior thread-db
7111 (try_thread_db_load): Adjust to use per-inferior thread-db info.
7112 (thread_db_load, disable_thread_event_reporting): Ditto.
7113 (check_for_thread_db): Remove conditional reporting of which
7114 libthread_db is in use.
7115 (thread_db_new_objfile): Add comment about inferior_ptid.
7116 (attach_thread): Adjust to use per-inferior thread-db info.
7117 (thread_db_detach): Adjust to use per-inferior thread-db info.
7118 Remove thread event breakpoints of the current inferior. Only
7119 unpush the thread-db target if there are no more processes using
7121 (check_event): Adjust to use per-inferior thread-db info.
7122 (thread_db_wait): Adjust to use per-inferior thread-db info. Only
7123 unpush the thread-db target if there are no more processes using
7125 (thread_db_mourn_inferior): Adjust to use per-inferior thread-db
7126 info. Mark breakpoints of the current inferior out before
7127 deleting them. Only unpush the thread-db target if there are no
7128 more processes using it.
7129 (find_new_threads_callback): Adjust to use per-inferior thread_db
7131 (thread_db_find_new_threads_1): Add new ptid argument. Adjust to
7132 use per-inferior thread-db info.
7133 (thread_db_find_new_threads): Adjust to use per-inferior thread-db
7135 (thread_db_get_thread_local_address): Adjust.
7136 (thread_db_get_ada_task_ptid): Adjust.
7137 * inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
7138 if there no more processes left to debug.
7139 * thread.c (set_running, set_executing): Handle resuming all
7140 threads of a single inferior.
7141 * mi/mi-interp.c (mi_output_running_pid): New.
7142 (mi_inferior_count): New.
7143 (mi_on_resume): For backwards compatibility, if resuming all
7144 threads of an inferior, and there is only one inferior, output
7147 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7149 * ada-lang.c (ada_find_any_type): Move check for primitive types ...
7150 (to_fixed_range_type): ... to here.
7152 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7154 * ada-lang.c (desc_data_type): Remove, replace by ...
7155 (desc_data_target_type): ... this.
7156 (thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
7157 (ada_is_array_descriptor_type): Likewise.
7158 (ada_type_of_array): Likewise.
7159 (ada_coerce_to_simple_array_type): Likewise.
7160 (ada_array_element_type): Likewise.
7162 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7164 * ada-valprint.c (ada_val_print_1): Use val_print_string to print
7165 result of ada_vax_float_print_function inferior call.
7167 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7169 * ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
7170 avoid creating a dummy value.
7172 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7174 * p-valprint.c (pascal_val_print): Use extract_typed_address
7175 to extract reference value.
7177 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7179 * doublest.c (NAN): Remove unused define.
7180 (extract_floating_by_length, deprecated_extract_floating): Remove.
7181 (store_floating_by_length, deprecated_store_floating): Remove.
7182 (extract_typed_floating): Do not call extract_floating_by_length.
7183 (store_typed_floating): Do not call store_floating_by_length.
7184 (convert_typed_floating): Remove redundant assertions.
7185 * doublest.h (deprecated_extract_floating): Remove.
7186 (deprecated_store_floating): Remove.
7187 * sh64-tdep.c (sh64_register_convert_to_raw): Call
7188 extract_typed_floating instead of deprecated_extract_floating.
7190 2009-05-18 Jon Beniston <jon@beniston.com>
7192 * MAINTAINERS: Add lm32 target.
7193 * Makefile.in: Add lm32 dependencies.
7194 * NEWS: Indicate lm32 is a new target.
7195 * configure.tgt: Add lm32 targets.
7196 * lm32-tdep.c: New file.
7198 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7200 * corelow.c (core_open): Flush the register cache before doing
7201 anything with registers.
7203 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7205 * inflow.h (our_process_group): Remove declaration.
7206 (inferior_process_group): Delete global variable declaration.
7207 (inferior_process_group): New function declaration.
7208 * inflow.c: Include observer.h.
7209 (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
7211 (struct terminal_info): New struct.
7212 (our_terminal_info): New global.
7213 (inferior_process_group): New function.
7214 (inferior_thisrun_terminal): Extend description comment.
7215 (gdb_has_a_terminal): Adjust to write to our_terminal_info fields
7217 (terminal_init_inferior_with_pgrp): Adjust to per-inferior
7219 (terminal_inferior): Ditto.
7220 (terminal_ours_1): Ditto.
7221 (inflow_new_inferior, inflow_inferior_exit): New functions.
7222 (child_terminal_info): Adjust to per-inferior terminal settings.
7223 (osig_set): New global.
7224 (set_sigint_trap): Adjust to per-inferior terminal settings. Set
7225 or clear `osig_set' accordingly.
7226 (clear_sigint_trap): Check `osig_set' to decide wheater to restore
7227 SIGINT handler, instead of checking the current inferior (which
7229 (_initialize_inflow): Attach inflow_new_inferior and
7230 inflow_inferior_exit to the "new_inferior" and "inferior_exit"
7231 notifications, respectively.
7232 * inferior.h (struct terminal_info): Forward declare.
7233 (struct inferior): Add `terminal_info' field.
7234 * inferior.c (delete_inferior_1): Notify the inferior_exit
7235 observers before removing the inferior from the lists and deleting
7237 * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
7238 a function instead of a variable. Adjust.
7239 * procfs.c (procfs_stop): Ditto.
7241 2009-05-17 Pedro Alves <pedro@codesourcery.com>
7243 * infrun.c (handle_inferior_event): When handling a
7244 TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
7246 * linux-nat.c (linux_child_follow_fork): Only detach breakpoints
7247 from the child if vforking.
7248 * inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
7249 breakpoints from the child here.
7251 2009-05-17 Pedro Alves <pedro@codesourcery.com>
7253 * infrun.c (pending_follow): Remove execd_pathname member.
7254 (resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
7255 (handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
7256 event, don't copy `execd_pathname' to pending_follow, use the
7257 event copy instead. Release `execd_pathname' once done with
7260 * infrun.c (pending_follow): Remove mention of exec events.
7262 2009-05-17 Hui Zhu <teawater@gmail.com>
7264 * i386-tdep.c (i386_process_record): Make it extern.
7265 (i386_gdbarch_init): Don't call set_gdbarch_process_record
7267 * i386-tdep.h (i386_process_record): Declare.
7268 * i386-linux-tdep.c (i386_linux_init_abi): Call
7269 set_gdbarch_process_record.
7271 2009-05-17 Vladimir Prus <vladimir@codesourcery.com>
7273 Always report varobj as changed when in_scope attribute changes.
7275 * varobj.c (install_new_value): If non-NULL-ness of value
7278 2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
7280 * NEWS: Mention set/show libthread-db-search-path.
7281 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
7282 (LIBTHREAD_DB_SO): Moved from linux-thread-db.c
7283 * linux-thread-db.c (libthread_db_search_path): New setting.
7284 (thread_db_handle): New variable (replaces using_thread_db).
7285 (try_thread_db_load_1): New function.
7286 (try_thread_db_load, thread_db_load_search): Likewise.
7287 (dladdr_to_soname): Likewise.
7288 (thread_db_load): Iterate over possibly multiple libthread_db's.
7289 (check_for_thread_db): Attempt to load new libthread_db.
7290 (thread_db_detach, thread_db_wait): Unload libthread_db.
7291 (thread_db_mourn_inferior): Likewise.
7292 (_initialize_thread_db): Add new libthread-db-search-path option.
7293 Defer loading of libthread_db to check_for_thread_db.
7294 * solib.c (libpthread_name_p): New function.
7295 (libpthread_solib_p): Call it.
7296 * solib.h (libpthread_name_p): New prototype.
7298 2009-05-15 Pierre Muller <muller@ics.u-strasbg.fr>
7300 * MAINTAINERS: Update my email address.
7302 2009-05-14 Paul Pluzhnikov <ppluzhnikov@google.com>
7304 * breakpoint.h: Add breakpoint_re_set_objfile prototype.
7305 * breakpoint.c (create_overlay_event_breakpoint): Renamed
7306 from create_overlay_event_breakpoint_1, old
7307 create_overlay_event_breakpoint deleted.
7308 (breakpoint_re_set_objfile): Don't rescan all objfiles
7310 (breakpoint_re_set): New function.
7311 * symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
7312 instead of breakpoint_re_set.
7313 * objfiles.c (objfile_relocate): Likewise.
7315 2009-05-14 Joel Brobecker <brobecker@adacore.com>
7317 * gdbarch.sh: Add comment documenting the target_gdbarch global.
7318 gdbarch.h does NOT need to be regenerated as the corresponding
7319 change has already been made in a previous commit.
7321 2009-05-14 Pierre Muller <muller@ics.u-strasbg.fr>
7323 Remove all i386 debug register low level macros in config nm files.
7324 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
7325 (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
7326 (I386_USE_GENERIC_WATCHPOIINTS): Remove.
7328 * i386-nat.h: New file (adapted from config/i386/nm-i386.h).
7329 (struct i386_dr_low_type): New type.
7330 (i386_dr_low): New global variable.
7331 * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
7332 (i386_insert_aligned_watchpoint): Replace i386 dr low macros by
7333 i386_dr_low struct variable fields.
7334 (i386_remove_aligned_watchpoint): Likewise.
7335 (i386_stopped_data_address): Likewise.
7336 (i386_stopped_by_hwbp): Likewise.
7337 (show_debug_regs_command_added): New static variable.
7338 (add_show_debug_regs_command): New static function.
7339 (i386_use_watchpoints): Call add_show_debug_regs_command if not done.
7340 (i386_set_debug_register_length): New function.
7341 (_initialize_i386_nat): Delete.
7343 * amd64-linux-nat.c: Include "i386-nat.h".
7344 (amd64_linux_dr_set_control): Change to static.
7345 (amd64_linux_dr_get_status): Change to static.
7346 (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
7347 (_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
7349 * go32-nat.c: Include "i386-nat.h".
7350 (go32_set_addr): Change to static.
7351 (go32_set_dr7): Change to static. Change arg type to unisgned long.
7352 (go32_get_dr6): Change to static. Change return type to unisnged long.
7353 (init_go32_ops): Set i386_dr_low variable fields.
7354 * i386-linux-nat.c: Include "i386-nat.h".
7355 (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
7356 (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
7357 (_initialize_i386_linux_nat): Set i386_dr_low variable fields.
7358 * i386bsd-nat.h: Declare functions used for
7359 i386_dr_low fields in i386fbsd-nat.c.
7360 * i386fbsd-nat.c: Include "i386-nat.h".
7361 (_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
7362 * windows-nat.c: Include "i386-nat.h".
7363 (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
7365 (cygwin_get_dr6): Change return type to unisnged long.
7366 (cygwin_set_dr7): Change arg type to unisgned long.
7367 (init_windows_ops): Set i386_dr_low function fields.
7369 * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call
7370 i386_set_debug_register_length.
7371 * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.
7373 * config/i386/nm-cygwin.h: Remove all I386_* macros.
7374 * config/i386/nm-cygwin64.h: Likewise.
7375 * config/i386/nm-fbsd.h: Likewise.
7376 * config/i386/nm-linux.h: Likewise.
7377 * config/i386/nm-i386.h: Remove completely.
7378 * config/i386/nm-go32.h: Remove completely.
7379 * config/i386/nm-linux64.h: Remove completely.
7380 * config/i386/go32.mh (NAT_FILE): Remove entry.
7381 * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
7383 2009-05-14 Jon Beniston <jon@beniston.com>
7385 * MAINTAINERS: Add Jon Beniston to write after approval list.
7387 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
7389 * objc-lang.c (objc_objfile_data): New variable.
7390 (find_methods): Skip objfiles without Obj-C methods.
7391 (_initialize_objc_lang): New function.
7393 2009-05-13 Joel Brobecker <brobecker@adacore.com>
7395 * c-lang.c (print_wchar): Remove unnecessary cast.
7397 2009-05-12 Jim Blandy <jimb@red-bean.com>
7399 * MAINTAINERS: Remove self as m32c target maintainer.
7401 2009-05-12 Pedro Alves <pedro@codesourcery.com>
7403 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
7404 * command.h (deprecated_add_set_cmd): Delete declaration.
7405 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
7406 'set debug gnu-nat' and 'show debug gnu-nat'.
7407 * i386-nat.c (_initialize_i386_nat): Replace 'maint
7408 show-debug-registers' with 'maint set show-debug-registers' and
7409 'maint show show-debug-registers'.
7410 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
7411 show-debug-registers' with 'maint set show-debug-registers' and
7412 'maint show show-debug-registers'.
7414 2009-05-12 Joel Brobecker <brobecker@adacore.com>
7416 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
7417 pushing it on the output obstack.
7419 2009-05-11 Joel Brobecker <brobecker@adacore.com>
7421 Fix internal error on breaking at a multi-locations caller source line.
7422 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
7423 command with no parameters.
7425 2009-05-11 Pedro Alves <pedro@codesourcery.com>
7427 * linux-nat.c (enum sigchld_state): Delete.
7428 (linux_nat_async_events_state): Delete.
7429 (struct waitpid_result): Delete.
7430 (waitpid_queue): Delete.
7431 (queued_waitpid_1): Delete.
7432 (async_file_flush): New.
7433 (queued_waitpid, push_waitpid): Delete.
7434 (async_file_mark): New.
7435 (drain_queued_events): Delete.
7436 (my_waitpid): Remove locally queued events handling.
7437 (linux_test_for_tracefork): Upjust.
7438 (linux_child_follow_fork): Ditto.
7439 (sync_sigchld_action): Delete.
7440 (blocked_mask): Reinstate.
7441 (async_sigchld_action): Rename to...
7442 (sigchld_action): ... this.
7443 (block_child_signals): New.
7444 (restore_child_signals_mask): New.
7445 (lin_lwp_attach_lwp): Adjust.
7446 (linux_nat_create_inferior): Ditto.
7447 (linux_nat_attach): Also use lp->status in async mode.
7448 (get_pending_status): Don't use queued_waitpid.
7449 (linux_nat_detach): Don't drain locally queued events.
7450 (linux_nat_resume): Allow pending wait statuses stored lp->status
7451 in async mode. If returning early due to a pending event,
7452 re-register the event source.
7453 (stop_wait_callback): Allow pending wait statuses stored
7454 lp->status in async mode.
7455 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
7456 (linux_nat_wait): Rename to ...
7457 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
7458 lp->status in async mode. Always add WNOHANG to the waitpid
7459 options in async mode.
7460 (linux_nat_wait): New.
7461 (kill_callback): Don't drain locally queued events.
7462 (sigchld_handler): Rewrite.
7463 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
7464 refer to "set target-async".
7465 (linux_nat_async_mask): If in non-stop, and re-enabling async
7466 mode, re-register the target event source in the event loop.
7467 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
7468 (get_pending_events, async_sigchld_handler)
7469 (linux_nat_async_events): Delete.
7470 (handle_target_event): New.
7471 (linux_nat_async_file_handler): Delete.
7472 (linux_async_pipe): New.
7473 (linux_nat_async): Only re-register in the event loop if not
7474 registered yet. Always notify the event-loop once if enabling the
7476 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
7477 lp->status, not in the locally queued event list.
7478 (linux_nat_stop): Don't mask out async event handling.
7479 (linux_nat_setup_async): Delete.
7480 (_initialize_linux_nat): Adjust.
7481 (lin_thread_get_thread_signals): blocked_mask is global again.
7484 2009-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
7486 Unify target macros.
7488 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
7489 (target_stoppped_by_watchpoint): New macro.
7490 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
7491 (target_have_steppable_watchpoint): New macro.
7492 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
7493 (target_have_continuable_watchpoint): New macro.
7494 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
7495 (target_can_use_hardware_watchpoint): New macro.
7496 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
7497 (target_region_ok_for_hw_watchpoint): New macro.
7499 * breakpoint.c (update_watchpoint): Use new macros.
7500 (bpstat_alloc): Likewise.
7501 (create_breakpoint): Likewise.
7502 (watch_command_1): Likewise.
7503 (can_use_hardware_watchpoint): Likewise.
7504 (do_enable_breakpoint): Likewise.
7505 * infrun.c (handle_inferior_event): Adapt to new macros.
7506 * mips-tdep.c (mips_gdbarch_init): Update comments.
7507 * procfs.c (procfs_set_watchpoint): Update comment.
7508 (procfs_insert_watchpoint): Adapt to new macros.
7509 * remote-m32r-sdi.c (m32r_stop):
7510 * remote-mips.c (mips_remove_breakpoint):
7511 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
7512 (debug_to_stopped_by_watchpoint): Likewise.
7515 2009-05-10 Pierre Muller <muller@ics.u-strasbg.fr>
7517 * src/gdb/target.h: Remove all tests for already defined
7518 macros. All macros defined here should not be set in config
7521 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7523 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
7524 (have_ptrace_getsetfpregs): Likewise.
7525 fetch_all_gp_regs): New function.
7526 (fetch_gp_regs): New function.
7527 (fetch_all_fp_regs): Likewise.
7528 (fetch_fp_regs): New function.
7529 (fetch_ppc_registers): Using the new methods to fetch general-
7530 purpose and floating-pointer registers.
7531 (store_all_gp_regs): New function.
7532 (store_gp_regs): Likewise.
7533 (store_all_fp_regs): New function.
7534 (store_fp_regs): Likewise.
7535 (store_ppc_registers): Using the new methods to store general-
7536 purpose and floating-pointer registers.
7538 2009-05-08 Doug Evans <dje@google.com>
7540 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
7542 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7544 * MAINTAINERS (Write After Approval): Add self.
7546 2009-05-07 Joel Brobecker <brobecker@adacore.com>
7548 * gdbarch.h (target_gdbarch): Add comment documenting this global.
7550 2009-05-06 Joel Brobecker <brobecker@adacore.com>
7552 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
7554 * configure: Regenerate.
7556 2009-05-06 Joel Brobecker <brobecker@adacore.com>
7558 * utils.c: Add include of gdb_usleep.h.
7559 (defaulted_query): Detect false EOF conditions that happen
7560 on terminals opened with the O_NONBLOCK flag when there is
7563 2009-05-06 Pedro Alves <pedro@codesourcery.com>
7565 * inferior.c (add_inferior): Move observer_notify_new_inferior
7567 (add_inferior_silent): ... here.
7569 2009-05-06 Pierre Muller <muller@ics.u-strasbg.fr>
7570 Pedro Alves <pedro@codesourcery.com>
7572 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
7573 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
7575 (procfs_stopped_by_watchpoint): Made static, ptid argument
7577 (_initialize_procfs): Register new watchpoint related target
7579 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
7580 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
7581 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
7582 (target_insert_watchpoint, target_remove_watchpoint): Delete.
7583 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
7585 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
7586 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
7587 (target_insert_watchpoint, target_remove_watchpoint): Delete.
7588 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
7590 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
7591 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
7592 (target_insert_watchpoint, target_remove_watchpoint): Delete.
7593 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
7596 2009-05-06 Hui Zhu <teawater@gmail.com>
7598 * i386-tdep.c (i386_process_record): Change bzero to memset.
7600 2009-05-06 Hui Zhu <teawater@gmail.com>
7602 * NEWS: Add item for process record and replay.
7604 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
7606 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
7608 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
7610 * inferior.h (read_pc, write_pc): Remove.
7611 * regcache.c (read_pc, write_pc): Remove.
7613 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
7615 (handle_inferior_event): Use regcache_read_pc instead of read_pc
7616 when determining value of stop_pc. Replace subsequent uses of
7617 read_pc by inspecting already-retrieved stop_pc value.
7618 (keep_going): Use regcache_read_pc instead of read_pc.
7620 * breakpoint.c (watchpoint_check): Use current frame architecture
7621 and PC instead of current_gdbarch and read_pc ().
7622 * tracepoint.c (set_traceframe_context): Replace PC argument
7623 with FRAME argument.
7624 (trace_start_command, finish_tfind_command): Update calls.
7625 (finish_tfind_command): Compare frame IDs to identify transitions
7627 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
7628 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
7629 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
7630 of read_pc and write_pc.
7631 (store_register): Make regcache argument non-const. Update call
7632 to exec_one_dummy_insn.
7634 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
7635 * infcmd.c (post_create_inferior): Likewise.
7636 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
7637 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
7638 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
7639 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
7640 * linux-fork.c (fork_load_infrun_state): Likewise.
7641 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
7642 * record.c (record_wait): Likewise.
7643 * procfs.c (procfs_wait): Likewise.
7644 * remote-mips.c (common_open, mips_wait): Likewise.
7645 * remote-m32r-sdi.c (m32r_resume): Likewise.
7647 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
7648 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
7649 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
7650 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
7651 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
7653 * solib-darwin.c: Include "regcache.h".
7654 * solib-pa64.c: Include "regcache.h".
7655 * solib-svr4.c: Include "regcache.h.".
7657 * symfile.c: Do not mention read_pc or write_pc in comments.
7658 * dink32-rom.c: Likewise.
7659 * m32r-rom.c: Likewise.
7660 * mips-tdep.c: Likewise.
7662 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
7664 * fork-child.c (startup_inferior): Move setting stop_pc ...
7665 * infcmd.c (post_create_inferior): ... to here.
7667 2009-05-04 Michael Snyder <msnyder@vmware.com>
7669 * NEWS: Add item for reverse debugging commands.
7671 2009-05-04 Pedro Alves <pedro@codesourcery.com>
7673 * go32-nat.c (go32_stop): Delete.
7674 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
7675 (go32_create_inferior): Don't call go32_stop or
7677 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
7679 (init_go32_ops): Don't register go32_stop.
7681 2009-05-02 Eli Zaretskii <eliz@gnu.org>
7683 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
7686 * infcall.c (find_function_addr): Avoid compiler warnings for
7689 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
7691 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
7692 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
7694 2009-05-01 Doug Evans <dje@google.com>
7696 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
7699 2009-05-01 Eli Zaretskii <eliz@gnu.org>
7701 * record.c (_initialize_record): Reformat and clarify doc strings
7702 for stop-at-limit and insn-number-max.
7704 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
7706 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
7708 Make specifiable the make_function_type type memory ownership.
7709 * gdbtypes.c (make_function_type): New parameter `objfile', use it
7710 explicitely instead of TYPE-initialized removed local variable
7711 `objfile'. Describe `objfile' it in the function comment.
7712 (lookup_function_type): Update make_function_type callers.
7713 * gdbtypes.h (make_function_type): Update the prototype.
7714 * jv-lang.c (java_link_class_type): Update make_function_type callers.
7715 * dwarf2read.c (read_subroutine_type): Likewise.
7716 * stabsread.c (read_type): Likewise.
7718 2009-05-01 Eli Zaretskii <eliz@gnu.org>
7720 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
7721 printing a bogus "Thread <main>".
7722 (go32_thread_alive): Don't return 1 for null_ptid.
7724 * i386-tdep.c (i386_go32_init_abi): Override the number of
7725 registers due to non-support of SSE.
7727 2009-04-30 Anthony Green <green@moxielogic.com>
7729 * configure.tgt: Link the moxie simulator in with gdb.
7731 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
7733 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
7736 2009-04-30 Hui Zhu <teawater@gmail.com>
7737 Michael Snyder <msnyder@vmware.com>
7739 I386 Linux process record and replay support.
7741 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
7742 This struct has the argument for the function
7743 "record_linux_system_call".
7744 (i386_linux_intx80_sysenter_record): New function. Parse the
7745 system call instruction and call function
7746 "record_linux_system_call" to record execute log.
7747 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
7748 Set "i386_linux_intx80_sysenter_record" to
7749 "i386_intx80_record" and "i386_sysenter_record".
7751 2009-04-30 Hui Zhu <teawater@gmail.com>
7752 Michael Snyder <msnyder@vmware.com>
7754 I386 architecture process record and replay support.
7756 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
7757 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
7759 (aflag, dflag, override, modrm, mod, reg, rm, ot,
7760 i386_record_pc): New variables. Ditto.
7761 (i386_record_modrm, i386_record_lea_modrm_addr,
7762 i386_record_lea_modrm): New functions. Ditto.
7763 (i386_process_record): New function. Parse the instruction in
7764 address "addr" and record the values of registers and memory
7765 that will be changed by this instruction.
7766 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
7767 "process_record" interface.
7768 * i386-tdep.h (gdbarch_tdep): New function pointers
7769 "i386_intx80_record" and "i386_sysenter_record" that point to
7770 the function that can record "intx80" and "sysenter" execute
7773 2009-04-30 Hui Zhu <teawater@gmail.com>
7774 Michael Snyder <msnyder@vmware.com>
7776 * infrun.c (use_displaced_stepping): Return false if process
7777 record and replay target is used.
7778 (proceed): Call function "record_not_record_set" if pocess
7779 record and replay target is used.
7781 2009-04-30 Hui Zhu <teawater@gmail.com>
7782 Michael Snyder <msnyder@vmware.com>
7784 Linux process record and replay support.
7786 * Makefile.in (ALLDEPFILES): Add linux-record.c.
7787 (ALL_TARGET_OBS): Add linux-record.o.
7788 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
7789 (i[34567]86-*-linux*): Add linux-record.o.
7790 * linux-record.c, linux-record.h: New file.
7792 2009-04-30 Hui Zhu <teawater@gmail.com>
7793 Michael Snyder <msnyder@vmware.com>
7795 Process record and replay target.
7797 * Makefile.in (SFILES): Add record.c.
7798 (COMMON_OBS): Add record.o.
7799 * record.c, record.h: New file.
7801 2009-04-30 Hui Zhu <teawater@gmail.com>
7802 Michael Snyder <msnyder@vmware.com>
7804 * target.h (strata): New stratum "record_stratum".
7806 2009-04-30 Hui Zhu <teawater@gmail.com>
7807 Michael Snyder <msnyder@vmware.com>
7809 GDBARCH interface for process record and replay.
7811 * gdbarch.sh (process_record): This interface point to the
7812 function that records the inferior execute log.
7814 2009-04-29 Doug Evans <dje@google.com>
7816 * i386-nat.c (child_post_startup_inferior): Delete, unused.
7818 2009-04-29 Pedro Alves <pedro@codesourcery.com>
7820 * breakpoint.c (print_exception_catchpoint): Access `b' directly
7821 instead of `b->loc->owner'.
7822 (print_mention_exception_catchpoint): Ditto.
7824 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
7826 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
7828 2009-04-27 Tom Tromey <tromey@redhat.com>
7830 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
7832 2009-04-27 Jerome Guitton <guitton@adacore.com>
7834 * symtab.c (append_exact_match_to_sals): New function, extracted
7835 from expand_line_sal.
7836 (expand_line_sal): Use append_exact_match_to_sals to append exact
7837 matches. If none found, append all best items.
7839 2009-04-27 Jerome Guitton <guitton@adacore.com>
7841 * main.c (captured_main): Move gdbinit lookups after gdb_init.
7843 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
7846 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
7847 (read_func_scope): Call inherit_abstract_dies.
7849 2009-04-25 Eli Zaretskii <eliz@gnu.org>
7851 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
7852 sparc-sol2-nat.c and sparc-sol2-tdep.c.
7854 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
7856 2009-04-24 Pierre Muller <muller@ics.u-strasbg.fr>
7858 ARI change: Use "/* ARI: rule */" pattern.
7859 * utils.c: Update ARI patterns.
7860 * gdb_dirent.h: Likewise.
7862 2009-04-23 Anthony Green <green@moxielogic.com>
7864 * MAINTAINERS: Add moxie target.
7865 * configure.tgt: Add moxie-*-elf target.
7866 * moxie-tdep.c: New file.
7867 * moxie-tdep.h: New file.
7869 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7871 * ada-lang.c: Remove an extra empty line. No code change.
7873 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
7875 Fix double free on error inserting the breakpoint instruction.
7876 * breakpoint.c (create_breakpoints): Move the
7877 update_global_location_list call to ...
7878 (break_command_really): ... here together with the second local call
7879 both unified after all the cleanups.
7881 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7882 Tom Tromey <tromey@redhat.com>
7884 * configure, config.in: Regenerate.
7885 * configure.ac: Support for relocatable GDB datadir. Use
7886 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
7887 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
7888 * top.c (init_main): Add "set data-directory".
7889 * defs.h (gdb_datadir): Declare.
7890 * main.c (gdb_datadir): New global.
7891 (captured_main): Initialize gdb_datadir. Use relocate_directory.
7892 (relocate_path): New function.
7893 (relocate_directory): Likewise.
7894 (get_init_files): Use relocate_path.
7895 (README): Mention --with-gdb-datadir.
7897 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7899 * ada-tasks (task_command_1): Call target_find_new_threads.
7901 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7903 * stack.c (do_gdb_disassembly): Print the exception message if an
7904 error was thrown while trying to perform the disassembly.
7906 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
7908 * varobj.c (free_variable): Replace free_current_contents by xfree.
7910 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
7912 * arm-linux-nat.c (fetch_register, store_register): Use
7913 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
7914 * arm-linux-tdep.c (arm_linux_supply_gregset,
7915 arm_linux_collect_gregset): Likewise.
7916 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
7917 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
7919 2009-04-22 Hui Zhu <teawater@gmail.com>
7921 * stack.c (_initialize_stack): Set the default of
7922 disassemble-next-line to off.
7924 2009-04-21 Tom Tromey <tromey@redhat.com>
7926 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
7927 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
7929 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
7931 * configure.ac: Add quotes to not lose brackets in help text.
7932 * configure: Rebuild.
7934 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
7936 * configure.ac: Don't postprocess Makefile in config.status.
7937 Substitute GDB_NM_FILE. Don't substitute nm_h.
7938 * Makefile.in (GDB_NM_FILE): Substitute.
7939 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
7940 * configure: Regenerate.
7941 * gnulib/Makefile.in: Regenerate.
7943 2009-04-21 Joseph Myers <joseph@codesourcery.com>
7945 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
7946 --with-htmldir): New.
7947 * configure: Regenerate.
7949 2009-04-21 Tom Tromey <tromey@redhat.com>
7951 * configure: Rebuild.
7952 * configure.ac: Use lower case for start of help strings. Clean
7953 up --with-sysroot help.
7955 2009-04-21 Tom Tromey <tromey@redhat.com>
7957 * configure: Rebuild.
7958 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
7959 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
7962 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
7964 ARI fix: remove "%p".
7965 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
7966 (ia64_sigtramp_frame_this_id): Ditto.
7967 (ia64_libunwind_frame_this_id): Ditto.
7968 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
7969 * symmisc.c (maintenance_info_psymtabs): Ditto.
7971 2009-04-21 Joseph Myers <joseph@codesourcery.com>
7973 * configure.ac (--with-relocated-sources): New.
7974 * configure, config.in: Regenerate.
7975 * source.c (add_substitute_path_rule): Remove static.
7976 * source.h (add_substitute_path_rule): Declare.
7977 * main.c: Include "source.h".
7978 (captured_main): Add substitution rule if RELOC_SRCDIR.
7980 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
7982 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
7984 2009-04-20 David Daney <ddaney@caviumnetworks.com>
7986 * NEWS: Mention MIPS/Linux hardware watchpoint support.
7988 2009-04-20 David Daney <ddaney@caviumnetworks.com>
7990 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
7991 (maint_show_dr, super_close): New variables.
7992 (super_fetch_registers, super_store_registers): Make static.
7993 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
7994 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
7995 (pt_watch_style): Define new enum.
7996 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
7998 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
8000 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
8001 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
8002 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
8003 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
8004 (type_to_irw, fill_mask, try_one_watch)
8005 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
8006 (mips_linux_new_thread, populate_regs_from_watches)
8007 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
8008 (mips_linux_close): New functions.
8009 (_initialize_mips_linux_nat): Register watchpoint functions with
8010 the target_ops. Add show-debug-regs maintenance command.
8012 2009-04-20 David Daney <ddaney@caviumnetworks.com>
8014 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
8016 2009-04-19 Pedro Alves <pedro@codesourcery.com>
8018 * NEWS: Mention gdbserver support for x86 Windows CE.
8020 2009-04-19 Eli Zaretskii <eliz@gnu.org>
8022 * config/djgpp/fnchange.lst: Fix typos.
8024 Set default host and target charsets in the DJGPP port.
8026 * config/djgpp/config.sed (am_cv_langinfo_codeset)
8027 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
8028 in all configure scripts that define ac_cv_env_CPP_value.
8030 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
8033 * config/djgpp/nl_types.h: New file.
8035 * config/djgpp/langinfo.h: New file.
8037 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
8039 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
8041 * Makefile.in (MAKEHTML): Set to makeinfo --html.
8042 (MAKEHTMLFLAGS): Set to empty.
8044 2009-04-18 Eli Zaretskii <eliz@gnu.org>
8046 * NEWS: Mention all new set/show commands added since GDB 6.8 was
8049 * go32-nat.c (go32_sysinfo): Check if the call to
8050 __dpmi_get_capabilities fills the buffer with information, and
8051 don't use the buffer if not.
8053 2009-04-17 Tom Tromey <tromey@redhat.com>
8055 * charset.c (_initialize_charset): Add special case for "646".
8057 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
8059 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
8060 * configure: Regenerate.
8061 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
8062 configure substitutions.
8063 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
8065 2009-04-17 Pierre Muller <muller@ics.u-strasbg.fr>
8067 ARI fix: Do not use %p, replace by call to host_address_to_string
8069 * darwin-nat.c (darwin_xfer_partial): Apply change.
8070 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
8071 * gnu-nat.h (proc_debug): Ditto.
8072 * symmisc.c (maintenance_info_symtabs): Ditto.
8073 (maintenance_info_psymtabs): Ditto.
8074 * windows-nat.c (handle_load_dll): Ditto.
8075 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
8076 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
8078 2009-04-17 Joseph Myers <joseph@codesourcery.com>
8080 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
8081 --enable-64-bit-bfd.
8082 (sparc-*-linux*): Likewise.
8084 2009-04-17 Eli Zaretskii <eliz@gnu.org>
8086 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
8089 2009-04-16 Pedro Alves <pedro@codesourcery.com>
8091 * remote.c (remote_query_attached): Fix pasto in packet_ok result
8094 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8096 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
8097 Revert the previous change. Might not be correct, actually.
8099 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8101 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
8102 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
8103 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
8104 Remove declaration. These are non-existent functions.
8106 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8108 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
8109 Fix a compilation warning on mips-irix due to casting from
8110 a pointer of different size.
8112 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8114 * ada-lang.c (symtab_for_sym): Delete.
8115 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
8117 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8119 * ada-lang.c (extract_string): Delete.
8120 (ada_main_name): Reimplement using target_read_string instead of
8123 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
8125 * m68klinux-nat.c: Remove obsolete comment.
8126 (fetch_register, store_register): Don't call
8127 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
8128 which are always nops here.
8130 2009-04-14 Tom Tromey <tromey@redhat.com>
8132 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
8133 (c_printstr): Likewise.
8134 * charset.c: Include gdb_wait.h.
8135 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
8136 (find_charset_names): Use pexecute. Handle libiconv's output.
8138 (_initialize_charset): Use xstrdup.
8139 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
8141 (INTERMEDIATE_ENCODING): New define.
8142 * configure, config.in: Rebuild.
8143 * configure.ac: Check for btowc.
8145 2009-04-15 Tom Tromey <tromey@redhat.com>
8147 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
8149 2009-04-15 Eli Zaretskii <eliz@gnu.org>
8151 * utils.c (parse_escape): Initialize target_char to pacify GCC.
8153 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8155 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
8157 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
8159 ARI fix: sprintf rule.
8160 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
8161 * ada-lang.c (add_angle_brackets): Use xstrprintf.
8162 (ada_decode): Replace sprintf by xsnprintf.
8163 (find_old_style_renaming_symbol): Ditto.
8164 (ada_to_fixed_type_1, ada_enum_name): Ditto.
8167 2009-04-14 Joel Brobecker <brobecker@adacore.com>
8169 * target.c (target_mourn_inferior): Call bfd_cache_close_all
8170 after having executed the target mourn_inferior routine.
8172 2009-04-14 Eli Zaretskii <eliz@gnu.org>
8174 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
8177 2009-04-13 David Daney <ddaney@caviumnetworks.com>
8179 * infrun.c (maybe_software_singlestep): New function.
8180 (resume): Call maybe_software_singlestep.
8181 (handle_inferior_event): Same.
8183 2009-04-13 Tom Tromey <tromey@redhat.com>
8185 * python/python-frame.c (frapy_richcompare): Return
8186 Py_NotImplemented, not an error. Handle Py_NE as well.
8188 2009-04-13 Eli Zaretskii <eliz@gnu.org>
8190 * charset.c (EILSEQ): Define if not defined by system headers.
8192 2009-04-11 Eli Zaretskii <eliz@gnu.org>
8194 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
8195 to be consistent with renaming config.intl.in into config_intl.in.
8197 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
8198 consistent with the change from 2008-11-09.
8200 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
8202 * gdbtypes.c: Remove excessive parentheses at the return keywords.
8203 * varobj.c (varobj_invalidate): Fix indentation.
8204 * varobj.c (varobj_invalidate): Fix formatting text width.
8206 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
8208 Implement -exec-jump.
8210 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
8211 * mi/mi-main.c (mi_cmd_exec_jump): New.
8212 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
8214 2009-04-07 Doug Evans <dje@google.com>
8216 * symfile.c (symbol_file_clear): Fix indentation.
8218 2009-04-06 Mark Kettenis <kettenis@gnu.org>
8220 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
8222 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
8224 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
8225 (ppc_linux_auxv_parse): New function.
8226 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
8227 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
8229 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
8231 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
8232 BFD to contents of SPU name note.
8233 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
8234 with "from_tty" argument 1 instead of 0.
8236 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
8239 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
8240 Create the symbol in local scope.
8241 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
8243 2009-04-02 Keith Seitz <keiths@redhat.com>
8245 * stabsread.c (read_member_functions): GCC may emit an extra space
8246 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
8247 whitespace when looking for these functions.
8249 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8251 Change the default value for "set print frame-arguments" to scalars.
8253 * stack.c (print_frame_arguments): Set initial value to "scalars".
8255 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
8257 * mips-tdep.c (mips_numeric_register_alieses): New definition.
8258 (mips_gdbarch_init): Add user registers from
8259 mips_numeric_register_aliases.
8261 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8263 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
8265 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8267 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
8268 this is the last one.
8270 2009-04-01 Pedro Alves <pedro@codesourcery.com>
8272 * remote.c (append_resumption): New.
8273 (remote_vcont_resume): Use it.
8275 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8277 * windows-nat.c (+windows_get_ada_task_ptid): New function.
8278 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
8280 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
8281 Keith Seitz <keiths@redhat.com>
8282 Jan Kratochvil <jan.kratochvil@redhat.com>
8285 * Makefile.in (dbxread.o): Update.
8286 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
8287 * dwarf2read.c (GDB_FORM_cached_string): New.
8288 (read_partial_die): Use dwarf2_canonicalize_name.
8289 (dwarf2_linkage_name): Use dwarf2_name.
8290 (dwarf2_canonicalize_name): New.
8291 (dwarf2_name): Use dwarf2_canonicalize_name.
8292 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
8293 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
8294 * symtab.c (lookup_symbol_in_language): Canonicalize input before
8296 * cp-name-parser.y: operator() requires two parameters,
8297 according to libiberty.
8298 * minsyms.c (lookup_minimal_symbol): Canonicalize input
8302 2009-03-31 Joel Brobecker <brobecker@adacore.com>
8304 Provide support for (Ada) task-specific breakpoints.
8306 * ada-lang.h (ada_get_task_number): Add declaration.
8307 (breakpoint_ada_task_match): Delete declaration.
8308 * ada-tasks.c (ada_get_task_number): Make non-static.
8309 * breakpoint.h (struct breakpoint): Add field "task".
8310 * breakpoint.c (print_one_breakpoint_location): Add handling of
8311 task-specific breakpoints.
8312 (create_breakpoint, create_breakpoints, find_condition_and_thread):
8313 New parameter "task".
8314 (break_command_really): Update calls to find_condition_and_thread
8315 and create_breakpoints.
8316 (breakpoint_re_set_one): Update call to find_condition_and_thread.
8319 2009-03-31 Joel Brobecker <brobecker@adacore.com>
8321 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
8323 2009-03-31 Pedro Alves <pedro@codesourcery.com>
8325 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
8326 if the thread's ptid without a thread id field is in the list
8327 before calling thread_change_ptid.
8328 (extended_remote_attach_1): In non-stop mode, do not rely on
8329 querying the current thread, instead, query the thread list, and
8330 select the first thread of the process.
8331 * gdbthread.h (first_thread_of_process): Declare.
8332 * thread.c (first_thread_of_process): Define.
8334 2009-03-30 Stan Shebs <stan@codesourcery.com>
8336 Make tracepoints into a type of breakpoint.
8337 * breakpoint.h (enum bptype): Add bp_tracepoint.
8338 (struct breakpoint): Add fields step_count, pass_count, actions.
8339 (get_tracepoint, get_tracepoint_by_number): Declare.
8340 (all_tracepoints): Declare.
8341 * breakpoint.c: Include tracepoint.h, readline.h.
8342 (ALL_TRACEPOINTS): Move here from tracepoint.c.
8343 (tracepoint_count): Ditto.
8344 (should_be_inserted): GDB does not insert tracepoints itself.
8345 (print_it_typical): Add tracepoint case.
8346 (bpstat_what): Ditto.
8347 (print_one_breakpoint_location): Ditto, and add printing for
8348 pass count, step count, and action list.
8349 (user_settable_breakpoint): Add tracepoint case.
8350 (allocate_bp_location): Ditto.
8351 (set_breakpoint_location_function): Ditto.
8352 (disable_breakpoints_in_shlibs): Ditto.
8354 (break_command_really): Add argument traceflag, use to choose
8355 basic breakpoint type.
8356 (break_command_1): Pass extra argument.
8357 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
8358 (breakpoint_re_set_one): Add tracepoint case.
8359 (disable_command, enable_command): Ditto.
8360 (set_tracepoint_count): Move here from tracepoint.c.
8361 (trace_command): Move here from tracepoint.c and use
8362 break_command_really.
8363 (tracepoints_info): Move here from tracepoint.c and call
8365 (enable_trace_command): Move here from tracepoint.c and call
8367 (disable_trace_command): Move here from tracepoint.c and call
8369 (delete_trace_command): Move here from tracepoint.c and call
8371 (trace_pass_command): Move here from tracepoint.c.
8372 (get_tracepoint_by_number): Ditto.
8373 (tracepoint_save_command): Ditto.
8374 (get_tracepoint): New function.
8375 (all_tracepoints): New function.
8376 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
8377 deprecate "enable trace" and "disable trace" commands.
8378 * tracepoint.h (struct tracepoint): Remove.
8379 (tracepoint_chain): Remove decl.
8380 (deprecated_create_tracepoint_hook): Remove decl.
8381 (deprecated_delete_tracepoint_hook): Remove decl.
8382 (deprecated_modify_tracepoint_hook): Remove decl.
8383 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
8384 (free_actions): Update signature.
8385 (validate_actionline): Update signature.
8386 (end_actions_pseudocommand): Declare.
8387 (while_stepping_pseudocommand): Declare.
8388 * tracepoint.c: Include breakpoint.h.
8389 (tracepoint_chain, tracepoint_count): Remove.
8390 (free_actions, make_cleanup_free_actions): Update signature.
8391 (trace_command, set_raw_tracepoint): Remove.
8392 (trace_mention): Remove.
8393 (tracepoints_info): Remove.
8394 (tracepoint_operation, map_args_over_tracepoints): Remove.
8395 (get_tracepoint_by_number): Remove.
8396 (enable_trace_command, disable_trace_command): Remove.
8397 (delete_trace_command, trace_pass_command): Remove.
8398 (trace_actions_command, read_actions): Update signature.
8399 (validate_actionline): Update signature, use bp loc.
8400 (encode_actions): Ditto.
8401 (download_tracepoint): New function, body of trace_start_command.
8402 (trace_start_command): Call it, use all_tracepoints.
8403 (tracepoint_save_command): Remove.
8404 (tracepoint_dump_command): Use get_tracepoint.
8405 (end_actions_pseudocommand): Make globally visible.
8406 (while_stepping_pseudocommand): Ditto.
8407 (_initialize_tracepoint): Move command definitions to breakpoint.c.
8409 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
8411 Expose frames to Python.
8412 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
8413 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
8414 (python-frame.o): New target.
8415 * python/python-frame.c: New file.
8416 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
8417 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
8418 gdbpy_initialize_frames): New prototypes.
8419 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
8420 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
8422 * stack.c (find_frame_funname): New function, factored out of
8424 (print_frame): Call find_frame_funname.
8425 * stack.h (find_frame_funname): Add prototype.
8427 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
8429 Remove unused value_object attribute `owned_by_gdb'.
8430 * python/python-value.c (value_object): Remove owned_by_gdb
8432 (valpy_dealloc): Remove reference to self->owned_by_gdb.
8433 (valpy_new): Likewise.
8434 (value_to_value_object): Likewise.
8436 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
8438 Change gdb.Value.address from a method to an attribute.
8439 * python/python-value.c (value_object): Add `address' element.
8440 (valpy_dealloc): Decrement reference to self->address if set.
8441 (valpy_new): Initialize val_obj->address.
8442 (valpy_address): Rename to ...
8443 (valpy_get_address): ... this. Change signature from method to
8444 attribute. Update self->address if not set.
8445 (value_to_value_object): Initialize val_obj->address.
8446 (value_object_getset): Add `address' element.
8447 (value_object_methods): Remove `address' element.
8449 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
8451 * observer.sh: Set LANG/LC_ALL to C, not c.
8453 2009-03-28 Kevin Buettner <kevinb@redhat.com>
8455 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
8458 2009-03-28 Pedro Alves <pedro@codesourcery.com>
8460 * remote.c (remote_stop_ns): If multi-process extensions are off,
8461 and GDB is requesting the whole process to stop, sent "vCont;t",
8464 2009-03-28 Pedro Alves <pedro@codesourcery.com>
8466 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
8469 2009-03-27 Eli Zaretskii <eliz@gnu.org>
8471 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
8473 2009-03-26 Doug Evans <dje@google.com>
8475 * thread.c (do_restore_current_thread_cleanup): Redo test for
8476 whether to restore old->inferior_ptid.
8478 2009-03-26 Tom Tromey <tromey@redhat.com>
8480 * breakpoint.c (resolve_sal_pc): Preserve original line number
8481 when skipping prologue.
8483 2009-03-26 Doug Evans <dje@google.com>
8485 * thread.c (inferior_thread) Remove "extern" in definition.
8487 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
8489 Add gdb.Value.is_optimized_out attribute.
8490 * python/python-value.c (valpy_get_is_optimized_out): New
8492 (value_object_getset): New variable.
8493 (value_object_type): Initialize tp_getset element.
8495 2009-03-26 Joel Brobecker <brobecker@adacore.com>
8497 Recognize missing DW_AT_location as <value optimized out>.
8499 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
8500 Call add_symbol_to_list.
8502 2009-03-25 Tom Tromey <tromey@redhat.com>
8504 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
8505 * stack.c (print_this_frame_argument_p): Use check_typedef.
8507 2009-03-25 Tom Tromey <tromey@redhat.com>
8509 * configure: Rebuild.
8510 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
8511 Rearrange flags setting. Add comments.
8513 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8515 * config/i386/nm-i386.h: Remove code within
8516 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
8517 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
8519 * config/i386/nm-cygwin64.h: Ditto.
8520 * config/i386/nm-fbsd.h: Ditto.
8521 * config/i386/nm-go32.h: Ditto.
8522 * config/i386/nm-linux.h: Ditto.
8523 * config/i386/nm-linux64.h: Ditto.
8525 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8527 ARI fix: "xasprintf" rule.
8528 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
8530 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8532 * remote.c (remote_start_remote): In non-stop mode, call
8533 init_wait_for_inferior before adding threads and inferiors.
8535 2009-03-25 Joel Brobecker <brobecker@adacore.com>
8537 * breakpoint.c (breakpoint_thread_match): Split a large condition
8538 into several smaller conditions. No behavior change.
8540 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8542 * infrun.c (infrun_thread_thread_exit): New.
8543 (_initialize_infrun): Attach it to the thread_exit observer.
8544 * thread.c (delete_thread_1): Always call the observer, passing it
8546 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
8547 SILENT, return immediately.
8549 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8551 * infrun.c (normal_stop): Use has_stack_frames instead of
8553 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
8554 when there is no thread selected.
8555 (mi_cmd_execute): Don't special case commands that can run without
8556 a valid selected thread.
8557 * top.c (execute_command): Don't special case commands that can
8558 run without a valid selected thread. Use has_stack_frames.
8559 * infcmd.c (ensure_valid_thread): New.
8560 (continue_1, step_1, jump_command, signal_command): Use it.
8561 (detach_command): Error out if there's no selected thread/inferior.
8562 * thread.c (print_thread_info): Allow having no thread selected.
8563 (switch_to_thread): Don't read the PC if there is no current thread.
8564 (do_restore_current_thread_cleanup): Don't record the current
8565 frame if there is no current thread.
8566 (make_cleanup_restore_current_thread): Don't read frame info if
8567 there is no selected thread.
8568 (_initialize_thread): Don't mark commands as
8569 "no_selected_thread_ok".
8570 * frame.c (get_current_frame): Error out if there is no valid
8572 (has_stack_frames): Return false if there is no valid
8574 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
8575 "no_selected_thread_ok".
8576 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
8577 (get_cmd_no_selected_thread_ok): Delete.
8578 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
8579 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
8581 * stack.c (get_selected_block): Use has_stack_frames.
8583 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
8585 Fix size of FPSCR in Power 7 processors.
8586 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
8587 (PPC_FEATURE_HAS_DFP): New #define.
8588 (ppc_linux_read_description): Check for DFP feature instead of
8589 ISA 2.05 to decide on size of the FPSCR.
8591 2009-03-25 Kevin Buettner <kevinb@redhat.com>
8593 * mn10300-tdep.c (trad-frame.h): Don't include.
8594 (prologue-value.h): Include.
8595 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
8596 (struct mn10300_prologue): Define.
8597 (push_reg, translate_rreg, check_for_saved): New functions.
8598 (mn10300_analyze_prologue): Rewrite, using prologue-value
8599 machinery. Handle more instructions than before. Permit
8600 instructions to occur in any order.
8601 (mn10300_skip_prologue): Find the extents of the function
8602 in question; mn10300_analyze_prologue no longer does this.
8603 (mn10300_analyze_frame_prologue): New function.
8604 (mn10300_frame_base): New function.
8605 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
8607 (mn10300_frame_prev_register): Likewise.
8608 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
8609 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
8611 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
8613 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8615 Fix completer problem for filename completion on the first try.
8617 * gdb/completer.h (gdb_completion_word_break_characters): New function.
8618 * gdb/completer.c: Include gdb_assert.h.
8619 (complete_line_internal_reason): New enum.
8620 (complete_line_internal): Change last argument type to
8621 complete_line_internal_reason.
8622 Modify function to handle the different complete_line_internal_reason
8624 (complete_line): Adapt to change in complete_line_internal.
8625 (command_completer): Ditto.
8626 (gdb_completion_word_break_characters): Implement new function.
8627 * top.c (init_main): Set rl_completion_word_break_hook to
8628 gdb_completion_word_break_characters.
8631 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8633 ARI fix: "strlen d_name" rule.
8634 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
8637 2009-03-24 Tom Tromey <tromey@redhat.com>
8638 Pedro Alves <pedro@codesourcery.com>
8640 * configure, config.in: Rebuild.
8641 * configure.ac: Check for libiconvlist.
8642 * charset.c: Check HAVE_LIBICONVLIST.
8643 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
8644 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
8645 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
8647 (INTERNAL_CFLAGS_BASE): Update.
8648 (INTERNAL_LDFLAGS): Update.
8651 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
8653 * configure.ac: Initialize the variable $PREFER_CURSES.
8654 * configure: Regenerated.
8656 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
8658 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
8659 * configure: Regenerated.
8661 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
8663 ARI fix: "strerror" rule.
8664 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
8665 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
8667 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8669 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
8670 before looking up the fields inside our struct type.
8672 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8674 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
8675 trying to resolve the type qualification.
8677 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8679 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
8680 we try to apply the attribute on the real type, rather than
8681 its associated typedef.
8683 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8685 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
8686 to make sure we try to get the modulus of the actual type, not the
8689 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8691 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
8692 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
8693 to get the real type, not the associated typedef.
8695 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8697 * ada-lang.c (ada_get_field_index): Add handling of the case
8698 when TYPE is a typedef of a struct.
8700 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8702 Add gdb_usleep as a portable version of usleep based on gdb_select.
8703 * gdb_usleep.h, gdb_usleep.c: New files.
8704 * Makefile.in (SFILES): Add gdb_usleep.c.
8705 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
8706 (COMMON_OBS): Add gdb_usleep.o.
8707 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
8708 by call to gdb_usleep.
8710 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8712 * buildsym.c (end_symtab): If we ignore the subfiles, then
8713 unlink the associated symtabs if they were already allocated.
8715 2009-03-23 Jerome Guitton <guitton@adacore.com>
8717 Provide a way to force building of GDB with libcurses.
8718 * configure.ac: Add --with-curses.
8719 * configure: Regenerated.
8721 2009-03-23 Tom Tromey <tromey@redhat.com>
8723 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
8726 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
8728 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
8729 solib_contains_address_p instead of searching.
8731 2009-03-23 Tom Tromey <tromey@redhat.com>
8733 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
8734 (iconv): Make 'inbuf' argument const.
8735 (convert_between_encodings): Use ICONV_CONST.
8736 (wchar_iterate): Likewise.
8738 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
8740 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
8741 dynamically loaded function.
8742 (LookupPrivilegeValueA): Ditto.
8743 (OpenProcessToken): Ditto.
8744 (AdjustTokenPrivileges): Rename and define placeholder for address of
8745 dynamically loaded function.
8746 (LookupPrivilegeValueA): Ditto.
8747 (OpenProcessToken): Ditto.
8748 (set_process_privilege): Remove check for loaded functions.
8749 (bad_OpenProcessToken): Define.
8750 (_initialize_loadable): Load token functions from advapi here, setting
8751 OpenProcessToken function to a dummy static function which always return
8752 error if OS doesn't support this functionality.
8754 2009-03-22 Nicolas Roche <roche@adacore.com>
8755 Christopher Faylor <me+cygwin@cgf.cx>
8757 * win32-nat.c (ctrl_c_handler): New function.
8758 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
8759 is run in a separate console.
8761 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
8763 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
8764 for dynamically loaded function.
8765 (DebugBreakProcess): Ditto.
8766 (DebugSetProcessKillOnExit): Ditto.
8767 (EnumProcessModules): Ditto.
8768 (GetModuleFileNameExA): Ditto.
8769 (GetModuleInformation): Ditto.
8770 (DebugActiveProcessStop): Rename and define placeholder for address of
8771 dynamically loaded function.
8772 (DebugBreakProcess): Ditto.
8773 (DebugSetProcessKillOnExit): Ditto.
8774 (EnumProcessModules): Ditto.
8775 (GetModuleFileNameExA): Ditto.
8776 (GetModuleInformation): Ditto.
8777 (psapi_loaded): Delete.
8778 (get_module_name): Don't check psapi_loaded, just rely on the fact that
8779 dynamically loaded functions will return failure if they weren't
8781 (has_detach_ability): Delete.
8782 (windows_attach): Remove call to has_detach_ability (). Just rely on
8783 functions being callable.
8784 (bad_DebugActiveProcessStop): Define.
8785 (bad_DebugBreakProcess): Ditto.
8786 (bad_DebugSetProcessKillOnExit): Ditto.
8787 (bad_EnumProcessModules): Ditto.
8788 (bad_GetModuleFileNameExA): Ditto.
8789 (bad_GetModuleInformation): Ditto.
8790 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
8791 dynamic storage here, setting nonexistent functions to dummy static
8792 functions which always return error.
8794 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8796 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
8797 to the about_to_proceed observer notification.
8798 (mi_about_to_proceed): New.
8799 (mi_on_resume): Only output ^running and the prompt here if the
8800 target was proceeded.
8801 * breakpoint.c (breakpoint_proceeded): New static.
8802 (breakpoint_about_to_proceed): New.
8803 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
8804 the about_to_proceed observer notification.
8805 * inferior.h (breakpoint_proceeded): Delete declaration.
8806 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
8807 Notify the about_to_proceed observers.
8808 (struct inferior_status): Delete breakpoint_proceeded member.
8809 (save_inferior_status): Don't save it.
8810 (restore_inferior_status): Don't restore it.
8811 * mi-main.h (mi_proceeded): Declare.
8812 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
8815 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8817 * gdbthread.h (struct thread_info): Add in_infcall member.
8818 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
8819 Remove reverences to suppress_resume_observer. Refresh
8820 `call_thread' after returning from `proceed'.
8821 * infcmd.c (suppress_resume_observer): Delete.
8822 * inferior.h (suppress_resume_observer): Delete declaration.
8823 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
8825 * thread.c (set_running): Remove references to
8826 suppress_resume_observer.
8827 * infrun.c (struct inferior_status): Add in_infcall member.
8828 (save_inferior_status): Save it.
8829 (restore_inferior_status): Restore it.
8831 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8833 * infcall.c (run_inferior_call): Remove references to
8834 suppress_stop_observer.
8835 * infcmd.c (suppress_stop_observer): Delete.
8836 (finish_command_continuation): Remove NOTE. Don't clear
8837 suppress_stop_observer anymore.
8838 (finish_command_continuation_free_arg): Likewise.
8839 (finish_forward): Remove references to suppress_stop_observer.
8840 Call normal_stop observer if we haven't already.
8841 * inferior.h (suppress_stop_observer): Delete.
8842 * infrun.c (normal_stop): When deciding to suppress the
8843 normal_stop observer, check for proceed_to_finish instead of
8844 suppress_stop_observer.
8846 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8848 * symfile.c (symfile_relocate_debug_section): Remove check for
8851 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
8852 Jim Blandy <jimb@red-bean.com>
8853 Thiago Jung Bauermann <bauerman@br.ibm.com>
8854 Tom Tromey <tromey@redhat.com>
8856 Miscellaneous fixes to the Python code.
8857 * python/python-cmd.c (cmdpy_init): Accept keyword
8859 * python/python-value.c (valpy_string): Accept keyword
8861 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
8862 Do not call value_to_value_object on NULL RES_VAL.
8863 (value_object_methods): Change `string' entry to also accept
8865 (convert_value_from_python): Return a copy of the value if obj is
8867 (value_object_methods): Mark the `string' method as accepting
8868 keywords, and show method "prototype" in the doc string.
8869 * python/python.c (get_parameter): Don't return inside a
8872 2009-03-20 Tom Tromey <tromey@redhat.com>
8874 Add support for convenience functions in Python.
8875 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
8876 (SUBDIR_PYTHON_SRCS): Add python-function.c.
8877 (python-function.o): New target.
8878 * eval.c: Include "python/python.h" and <ctype.h>.
8879 (evaluate_subexp_standard): Handle values of type
8880 TYPE_CODE_INTERNAL_FUNCTION.
8881 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
8882 * parse.c (write_exp_string): Remove duplicate word in comment.
8883 * python/python-function.c: New file.
8884 * python/python-internal.h (gdbpy_initialize_functions): Add
8886 * python/python.c (_initialize_python): Call
8887 gdbpy_initialize_functions.
8888 * valprint.c (value_check_printable): Handle values of type
8889 TYPE_CODE_INTERNAL_FUNCTION.
8890 * value.c: Include "cli/cli-decode.h".
8891 (internal_function): New struct.
8892 (functionlist, internal_fn_type): New static variables.
8893 (lookup_only_internalvar,
8894 lookup_internalvar): Add const qualifier to name argument.
8895 (create_internalvar): Likewise. Initialize new field.
8896 (set_internal_var): Fix typo in comment. Don't allow assignment
8897 to canonical variable.
8898 (value_create_internal_function, value_internal_function_name,
8899 call_internal_function, function_command, function_destroyer,
8900 add_internal_function): New functions.
8901 (_initialize_values): Create `function' placeholder command.
8902 Initialize internal_fn_type.
8903 * value.h (lookup_only_internalvar, create_internalvar,
8904 lookup_internalvar): Add const qualifier to name argument.
8905 (internal_function_fn, add_internal_function, call_internal_function,
8906 value_internal_function_name): Add prototypes.
8907 (struct internalvar) <canonical>: New field.
8909 2009-03-20 Tom Tromey <tromey@redhat.com>
8911 * c-lang.c (evaluate_subexp_c): Call check_typedef.
8913 2009-03-20 Tom Tromey <tromey@redhat.com>
8914 Julian Brown <julian@codesourcery.com>
8916 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
8917 PR i18n/9401, PR exp/9613:
8919 * value.h (value_typed_string): Declare.
8920 (val_print_string): Update.
8921 * valprint.h (print_char_chars): Update.
8922 * valprint.c (print_char_chars): Add type argument. Update.
8923 (val_print_string): Likewise.
8924 * valops.c (value_typed_string): New function.
8925 * utils.c (host_char_to_target): New function.
8926 (parse_escape): Use host_char_to_target, host_hex_value. Update.
8928 (no_control_char_error): Remove.
8929 * typeprint.c (print_type_scalar): Update.
8930 * scm-valprint.c (scm_scmval_print): Update.
8931 * scm-lang.h (scm_printchar, scm_printstr): Update.
8932 * scm-lang.c (scm_printchar): Add type argument.
8933 (scm_printstr): Likewise.
8934 * printcmd.c (print_formatted): Update.
8935 (print_scalar_formatted): Update.
8936 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
8937 Handle '%lc' and '%ls'.
8938 * parser-defs.h (struct typed_stoken): New type.
8939 (struct stoken_vector): Likewise.
8940 (write_exp_string_vector): Declare.
8941 * parse.c (write_exp_string_vector): New function.
8942 * p-valprint.c (pascal_val_print): Update.
8943 * p-lang.h (is_pascal_string_type, pascal_printchar,
8944 pascal_printstr): Update.
8945 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
8946 Add 'char_type' argument.
8947 (pascal_emit_char): Add type argument.
8948 (pascal_printchar): Likewise.
8949 (pascal_printstr): Likewise.
8950 * objc-lang.c (objc_emit_char): Add type argument.
8951 (objc_printchar): Likewise.
8952 (objc_printstr): Likewise.
8953 * macroexp.c (get_character_constant): Handle unicode characters.
8955 (get_string_literal): Handle unicode strings. Use
8957 * m2-valprint.c (print_unpacked_pointer): Update.
8958 (m2_print_array_contents): Update.
8959 (m2_val_print): Update.
8960 * m2-lang.c (m2_emit_char): Add type argument.
8961 (m2_printchar): Likewise.
8962 (m2_printstr): Likewise.
8963 * language.h (struct language_defn) <la_printchar>: Add type
8965 <la_printstr, la_emitchar>: Likewise.
8966 (LA_PRINT_CHAR): Likewise.
8967 (LA_PRINT_STRING): Likewise.
8968 (LA_EMIT_CHAR): Likewise.
8969 * language.c (unk_lang_emit_char): Add type argument.
8970 (unk_lang_printchar): Likewise.
8971 (unk_lang_printstr): Likewise.
8972 * jv-valprint.c (java_val_print): Update.
8973 * jv-lang.c (java_emit_char): Add type argument.
8974 * f-valprint.c (f_val_print): Update.
8975 * f-lang.c (f_emit_char): Add type argument.
8976 (f_printchar): Likewise.
8977 (f_printstr): Likewise.
8978 * expprint.c (print_subexp_standard): Update.
8979 * charset.h (target_wide_charset): Declare.
8980 (c_target_char_has_backslash_escape, c_parse_backslash,
8981 host_char_print_literally, host_char_to_target,
8982 target_char_to_host, target_char_to_control_char): Remove.
8983 (enum transliterations): New type.
8984 (convert_between_encodings): Declare.
8985 (HOST_ESCAPE_CHAR): New define.
8986 (host_letter_to_control_character, host_hex_value): Declare.
8987 (enum wchar_iterate_result): New enum.
8988 (struct wchar_iterator): Declare.
8989 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
8990 wchar_push_back): Declare.
8991 * charset-list.h: New file.
8992 * c-valprint.c (textual_name): New function.
8993 (textual_element_type): Handle wide character types.
8994 (c_val_print): Pass original type to textual_element_type. Handle
8995 wide character types.
8996 (c_value_print): Use textual_element_type. Pass original type of
8998 * c-lang.h (enum c_string_type): New type.
8999 (c_printchar, c_printstr): Update.
9000 * c-lang.c (classify_type): New function.
9001 (print_wchar): Likewise.
9002 (c_emit_char): Add type argument. Handle wide characters.
9003 (c_printchar): Likewise.
9004 (c_printstr): Add type argument. Handle wide and multibyte
9006 (convert_ucn): New function.
9007 (emit_numeric_character): Likewise.
9008 (convert_octal): Likewise.
9009 (convert_hex): Likewise.
9010 (ADVANCE): New macro.
9011 (convert_escape): New function.
9012 (parse_one_string): Likewise.
9013 (evaluate_subexp_c): Likewise.
9014 (exp_descriptor_c): New global.
9015 (c_language_defn): Use exp_descriptor_c.
9016 (cplus_language_defn): Likewise.
9017 (asm_language_defn): Likewise.
9018 (minimal_language_defn): Likewise.
9019 (charset_for_string_type): New function.
9020 * c-exp.y (%union): Add 'svec' and 'tsval'.
9022 (exp): Add CHAR production.
9023 (string_exp): Rewrite.
9024 (exp) <string_exp>: Rewrite.
9025 (tempbuf): Now global.
9026 (tempbuf_init): New global.
9027 (parse_string_or_char): New function.
9028 (yylex) <tempbuf>: Now global.
9029 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
9031 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
9032 (c_parse_escape): New function.
9033 * auxv.c (fprint_target_auxv): Update.
9034 * ada-valprint.c (ada_emit_char): Add type argument.
9035 (ada_printchar): Likewise.
9036 (ada_print_scalar): Update.
9037 (printstr): Add type argument. Update calls to ada_emit_char.
9038 (ada_printstr): Add type argument.
9039 (ada_val_print_array): Update.
9040 (ada_val_print_1): Likewise.
9041 * ada-lang.c (emit_char): Add type argument.
9042 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
9044 * gdb_locale.h: Include langinfo.h.
9045 * charset.c (_initialize_charset): Set default host charset from
9046 the locale. Don't register charsets. Add target-wide-charset
9047 commands. Call find_charset_names.
9048 (struct charset, struct translation): Remove.
9049 (GDB_DEFAULT_HOST_CHARSET): Remove.
9050 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
9051 (target_wide_charset_name): New global.
9052 (show_host_charset_name): Handle "auto".
9053 (show_target_wide_charset_name): New function.
9054 (host_charset_enum, target_charset_enum): Remove.
9055 (charset_enum): New global.
9056 (all_charsets, register_charset, lookup_charset, all_translations,
9057 register_translation, lookup_translation): Remove.
9058 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
9059 (iso_8859_print_literally, iso_8859_to_control,
9060 iso_8859_family_charset): Remove.
9061 (ebcdic_print_literally, ebcdic_to_control,
9062 ebcdic_family_charset): Remove.
9063 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
9064 register_iconv_charsets): Remove.
9065 (target_wide_charset_be_name, target_wide_charset_le_name): New
9067 (identity_either_char_to_other): Remove.
9068 (set_be_le_names, validate): New functions.
9069 (backslashable, backslashed, represented): Remove.
9070 (default_c_target_char_has_backslash_escape): Remove.
9071 (default_c_parse_backslash, iconv_convert): Remove.
9072 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
9073 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
9074 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
9075 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
9076 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
9077 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
9078 (table_convert_char, table_translation, simple_table_translation):
9080 (current_host_charset, current_target_charset,
9081 c_target_char_has_backslash_escape_func,
9082 c_target_char_has_backslash_escape_baton): Remove.
9083 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
9084 (host_char_to_target_func, host_char_to_target_baton): Remove.
9085 (target_char_to_host_func, target_char_to_host_baton): Remove.
9086 (cached_iconv_host_to_target, cached_iconv_target_to_host):
9088 (lookup_charset_or_error, check_valid_host_charset): Remove.
9089 (set_host_and_target_charsets): Remove.
9090 (set_host_charset, set_target_charset): Remove.
9091 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
9092 (set_target_wide_charset_sfunc): New function.
9093 (show_charset): Print target wide character set.
9094 (host_charset, target_charset): Rewrite.
9095 (target_wide_charset): New function.
9096 (c_target_char_has_backslash_escape): Remove.
9097 (c_parse_backslash): Remove.
9098 (host_letter_to_control_character): New function.
9099 (host_char_print_literally): Remove.
9100 (host_hex_value): New function.
9101 (target_char_to_control_char): Remove.
9102 (cleanup_iconv): New function.
9103 (convert_between_encodings): New function.
9104 (target_char_to_host): Remove.
9105 (struct wchar_iterator): Define.
9106 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
9107 wchar_push_back): New functions.
9108 (do_cleanup_iterator): New function.
9109 (char_ptr): New typedef.
9110 (charsets): New global.
9111 (add_one, find_charset_names): New functions.
9112 (default_charset_names): New global.
9113 (auto_host_charset_name): Likewise.
9114 * aclocal.m4, config.in, configure: Rebuild.
9115 * configure.ac: Call AM_LANGINFO_CODESET.
9116 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
9117 (AM_ICONV): Invoke earlier.
9118 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
9119 LIBICONV_LIBDIR. Check for libiconv in build tree.
9120 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
9121 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
9122 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
9123 * gdb_obstack.h (obstack_grow_wstr): New define.
9124 * gdb_wchar.h: New file.
9125 * defs.h: Include it.
9127 2009-03-20 Tom Tromey <tromey@redhat.com>
9128 Jan Kratochvil <jan.kratochvil@redhat.com>
9130 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
9131 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
9133 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
9135 * ada-typeprint.c (print_array_type): Do the NULL check
9138 2009-03-19 Tom Tromey <tromey@redhat.com>
9140 * utils.c (do_obstack_free): New function.
9141 (make_cleanup_obstack_free): Likewise.
9142 * defs.h (make_cleanup_obstack_free): Declare.
9144 2009-03-18 Doug Evans <dje@google.com>
9146 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
9147 int, not a long long.
9148 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
9150 * expprint.c (dump_raw_expression): Print note if non-NULL.
9152 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
9155 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
9157 * Makefile.in: Update license to GPLv3.
9158 * ada-exp.y: Update license to GPLv3.
9159 * ada-lex.l: Update license to GPLv3.
9160 * c-exp.y: Update license to GPLv3.
9161 * cp-name-parser.y: Update license to GPLv3.
9162 * darwin-nat-info.c: Update license to GPLv3.
9163 * f-exp.y: Update license to GPLv3.
9164 * gdb_thread_db.h: Update license to GPLv3.
9165 * hppanbsd-nat.c: Update license to GPLv3.
9166 * hppanbsd-tdep.c: Update license to GPLv3.
9167 * hppaobsd-tdep.c: Update license to GPLv3.
9168 * jv-exp.y: Update license to GPLv3.
9169 * m2-exp.y: Update license to GPLv3.
9170 * objc-exp.y: Update license to GPLv3.
9171 * p-exp.y: Update license to GPLv3.
9172 * reply_mig_hack.awk: Update license to GPLv3.
9173 * reverse.c: Update license to GPLv3.
9174 * xtensa-xtregs.c: Update license to GPLv3.
9176 2009-03-18 Pedro Alves <pedro@codesourcery.com>
9178 * remote.c (remote_close): Don't call generic_mourn_inferior.
9179 (remote_mourn_1): Call generic_mourn_inferior after closing the
9182 2009-03-18 Pedro Alves <pedro@codesourcery.com>
9184 * remote.c (remote_start_remote): Add missing call to
9185 init_wait_for_inferior in non-stop mode.
9187 2009-03-18 Pedro Alves <pedro@codesourcery.com>
9189 * breakpoint.c (bpstat_should_step): Only consider software
9190 watchpoints that have a location.
9192 2009-03-17 Joel Brobecker <brobecker@adacore.com>
9194 Add a target_ops parameter to the to_kill method in struct target_ops.
9196 * target.h (struct target_ops): Add a "target_ops *" parameter to
9198 (target_kill): Remove macro. Add declaration.
9199 * target.c (debug_to_kill): Delete, no longer necessary.
9200 (target_kill): New function.
9201 (update_current_target): Stop inheriting the to_kill method.
9202 Do not de_fault it to no_process either.
9203 (setup_target_debug): Do not set current_target.to_kill.
9204 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
9205 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
9206 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
9209 2009-03-17 Doug Evans <dje@google.com>
9211 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
9212 glibc 2.3.2 and earlier.
9214 2009-03-17 Joel Brobecker <brobecker@adacore.com>
9216 * frame.c (get_prev_frame_1): Do not perform the inner_frame
9217 sanity check if this_frame is not NORMAL.
9218 (frame_id_inner): Update the description of this function.
9220 2009-03-17 Hui Zhu <teawater@gmail.com>
9222 * stack.c: Change the introduce of "disassemble-next-line".
9224 2009-03-17 Pedro Alves <pedro@codesourcery.com>
9226 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
9229 2009-03-17 Hui Zhu <teawater@gmail.com>
9231 * stack.c: Include valprint.h.
9232 (disassemble_next_line): New enum.
9233 (show_disassemble_next_line): New function. Show the current
9234 value of disassemble-next-line.
9235 (gdb_disassembly_stub_args): New struct for argument passing
9236 between function do_gdb_disassembly and function
9237 gdb_disassembly_stub.
9238 (gdb_disassembly_stub): New function. Helper for
9240 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
9241 the exception from the gdb_disassembly because it will be
9242 broken by filter sometime.
9243 (print_frame_info): If disassemble-next-line is set to auto
9244 or on and doesn't have the line debug messages for $pc,
9245 output the next instruction.
9246 If disassemble-next-line is set to on and there is line debug
9247 messages, output assembly codes for next line.
9248 (_initialize_stack): Make the "set disassemble-next-line"
9249 command an auto-boolean command. Change its class to
9250 class_stack. Place it in the top level set list. Extend help
9251 to describe the auto mode.
9253 2009-03-17 Pedro Alves <pedro@codesourcery.com>
9255 * infrun.c (normal_stop): Don't overwrite old_chain.
9257 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9259 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
9260 which is undefined, by call to regcache_invalidate, which should
9261 do what the original author wanted to do.
9263 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9265 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
9266 (mips_create_inferior): Likewise.
9268 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9270 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
9272 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9274 * darwin-nat.c (darwin_resume): Fix a compiler warning when
9275 building on x86_64-darwin.
9277 2009-03-16 Tristan Gingold <gingold@adacore.com>
9279 * configure.tgt: Add handling for x86_64-darwin.
9281 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
9283 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
9285 2009-03-15 Joel Brobecker <brobecker@adacore.com>
9287 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
9288 Use the ops parameter to get to the target beneath, rather than
9289 using the current_target global. Using the current_target global
9290 was an unintended accident.
9292 2009-03-15 Joel Brobecker <brobecker@adacore.com>
9294 Fix an error happening while loading symbols from a core file
9297 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
9298 to detect whether we're debugging a core file or not.
9300 2009-03-15 Joel Brobecker <brobecker@adacore.com>
9302 Modernize the aix-thread later by getting rid of the base_target
9303 global. This brings back to life the AIX port which was otherwise
9304 crashing all the time.
9306 * aix-thread.c (base_target): Delete.
9307 (pd_enable): Do not set base_target.
9308 (aix_thread_attach): Use find_target_beneath instead of base_target.
9309 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
9310 (aix_thread_fetch_registers, aix_thread_store_registers),
9311 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
9312 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
9313 (aix_thread_kill): Delete. Does not seem necessary.
9314 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
9316 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
9318 * stack.c (return_command <retval_exp>): New variables retval_expr
9319 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
9320 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
9321 if RETURN_TYPE is NULL.
9323 2009-03-14 Pedro Alves <pedro@codesourcery.com>
9325 * remote.c (PACKET_qAttached): New.
9326 (remote_query_attached): New.
9327 (remote_add_inferior): Add new `attached' argument. Handle it.
9328 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
9329 -1 to remote_add_inferior in new parameter.
9330 (extended_remote_attach_1): Adjust to pass 1 to
9331 remote_add_inferior in the new parameter.
9332 (extended_remote_create_inferior_1): Adjust to pass 0 to
9333 remote_add_inferior in the new parameter.
9334 (_initialize_remote): Add "set/show remote query-attached-packet"
9337 2009-03-13 Tom Tromey <tromey@redhat.com>
9339 * symtab.c (lookup_symbol_in_language): Use a cleanup.
9341 2009-03-13 Doug Evans <dje@google.com>
9343 * exceptions.h: Clean up some comments on catch_exceptions usage.
9344 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
9347 2009-02-17 Joel Brobecker <brobecker@adacore.com>
9349 The following patch helps getting rid of a warning inside solib-som.c.
9351 * source.c (source_full_path_of): Constify parameter filename.
9352 * defs.h (source_full_path_of): Update declaration accordingly.
9354 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9356 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
9357 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
9358 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
9360 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9362 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
9363 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
9365 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9367 * ada-tasks.c (ada_task_is_alive): Move up and make static.
9368 * ada-lang.h (ada_task_is_alive): Remove declaration.
9370 2009-03-12 Jerome Guitton <guitton@adacore.com>
9372 * ada-lang.c (ada_delta): Change the type of numerators and
9373 denominators to DOUBLEST, as they may not fit into a long.
9374 (scaling_factor): Ditto.
9376 2009-03-12 Jerome Guitton <guitton@adacore.com>
9378 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
9380 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9382 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
9383 types, if we are unable to determine the actual symbol type
9384 from its tag, then use the static approximation instead.
9386 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9388 Fix crash printing packed record with packed array.
9390 * ada-lang.c (ada_modulus_from_name): New function.
9391 (ada_modulus): In the case where the type length is bigger than
9392 the size of the type used to hold the bounds, try determining
9393 the modulus from the type name.
9394 (ada_value_primitive_packed_val): Fix bug in the computation of
9395 ntarg causing an out-of-buffer invalid access.
9397 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9399 Fix segfault when printing short_integer'last.
9401 * ada-lang.c (ada_find_any_type): Search in the primitive types
9402 if a symbol could not be found.
9404 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9406 * ada-tasks.c (task_states,long_task_states): Add new states
9407 Activating and Acceptor_Delay_Sleep. Update the description
9408 of state Acceptor_Sleep.
9410 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
9412 Fix a build failure on Darwin following some changes in
9413 the profile of some target_ops methods.
9415 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
9417 (darwin_stop_inferior, darwin_detach): Likewise.
9419 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
9421 Include token in ^running notification for CLI commands.
9423 * mi/mi-main.c (mi_execute_command): Set current_token here.
9424 (mi_cmd_execute): Do not set current_token here.
9426 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
9430 * mi/mi-main.c (mi_print_timing_maybe): New.
9431 (captured_mi_execute_command): Simplify. Output timings to
9433 (mi_execute_async_cli_command): Do not print timings.
9434 * mi/mi-main.h (mi_print_timing_maybe): Declare.
9435 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
9437 2009-03-12 Jerome Guitton <guitton@adacore.com>
9439 * xcoffread.c (process_linenos): Check if the line in the
9440 include table refers to the main source file and, if so,
9441 add them to the main subfile.
9443 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9445 Fix a build failure on AIX introduced after a change in the profile
9446 of some of the "methods" in the target_ops structure.
9447 * aix-thread.c: Add missing target_ops parameter throughout.
9449 Implement Ada task switching on AIX.
9450 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
9451 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
9453 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
9455 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
9456 value_mark and value_free_to_mark.
9457 * objfiles.c (free_objfile): Call objfile_free_data before
9460 2009-03-10 Hui Zhu <teawater@gmail.com>
9462 * disasm.c (gdb_disassembly): Remove unused argument
9464 * disasm.h (gdb_disassembly): Ditto.
9465 * cli/cli-cmds.c (print_disassembly): Ditto.
9466 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
9468 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
9470 * solib.c (solib_contains_address_p): New function.
9471 (solib_name_from_address): Use it.
9472 * printcmd.c (display_uses_solib_p): Use it.
9473 * solib.h (solib_contains_address_p): Declare it.
9475 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
9477 * varobj.c (free_variable): Call value_free.
9479 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
9482 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
9483 Move the variable `macinfo_type' out of the loop. Create a new
9484 processing pass before the current one to pre-create `current_file'.
9485 New complaint on misplaced zero/non-zero definitions/includes.
9486 Skip first DW_MACINFO_start_file with `at_commandline' set.
9488 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
9490 * solib.c (reload_shared_libraries): Give
9491 inferior a chance to reset solib breakpoint.
9494 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
9496 * windows-nat.c (dr): Redefine to use largest possible integer which
9498 (cygwin_set_dr): Avoid coercion.
9500 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
9502 * windows-nat.c (windows_create_inferior): Implement --tty handling on
9505 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
9507 Rename solib_address to solib_name_from_address.
9508 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
9509 (disable_breakpoints_in_unloaded_shlib): Update.
9510 * printcmd.c (display_uses_solib_p): Likewise.
9511 * stack.c (print_frame): Likewise.
9515 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
9517 * printcmd.c (do_one_display): Reparse exp_string.
9518 (display_uses_solib_p): New function.
9519 (clear_dangling_display_expressions): New function.
9520 (_initialize_printcmd): Add observer.
9521 * solib.c (no_shared_libraries): Swap order of calls to
9522 clear_solib and objfile_purge_solibs.
9524 2009-03-05 Joel Brobecker <brobecker@adacore.com>
9526 Implement the target-specific part of Ada tasking support
9529 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
9530 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
9532 2009-03-05 Joel Brobecker <brobecker@adacore.com>
9534 Get rid of the global "base_target" and use "find_target_beneath"
9535 to find the underlying target.
9536 * dec-thread.c (base_target): Delete.
9537 (enable_dec_thread): Remove assignement to base_target.
9538 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
9539 (dec_thread_fetch_registers, dec_thread_store_registers)
9540 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
9541 Update the function profile if necessary.
9542 Use find_target_beneath to call the same method but from
9543 the underlying target, removing the need for "base_target".
9545 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
9546 Fix a copy/paste error in a few debug traces...
9548 * solib-osf.c (init_so): Use a simpler method for computing
9549 the size of lm_info structure. This also gets rid of warning
9550 emitted by the compiler.
9552 2009-03-05 Pedro Alves <pedro@codesourcery.com>
9554 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
9555 duplicates of permanent breakpoints.
9557 2009-03-04 Pedro Alves <pedro@codesourcery.com>
9559 * inferior.h (notice_new_inferior): Declare.
9560 * infcmd.c (notice_new_inferior): New.
9561 * remote.c (remote_add_inferior, remote_add_thread): New.
9562 (notice_new_inferiors): Rename to...
9563 (remote_notice_new_inferior): ... this. Add RUNNING argument.
9564 Use remote_add_thread instead of add_thread, passing it the
9565 RUNNING argument. Add an inferior with remote_add_inferior. If
9566 we just learned about an inferior, call notice_new_inferior.
9567 (record_currthread): Adjust.
9568 (remote_threads_info): Adjust to use remote_notice_new_inferior.
9569 (remote_start_remote, extended_remote_attach_1): Use
9570 remote_add_inferior.
9571 (process_stop_reply): Adjust. Call remote_notice_new_inferior
9572 after handling expedited registers and watchpoint state.
9573 (extended_remote_create_inferior_1): Use remote_add_inferior.
9575 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
9577 * infcmd.c (registers_info): Remove register number case.
9579 2009-03-03 Pedro Alves <pedro@codesourcery.com>
9581 * top.c (quit_target): Check for target_has_execution before
9582 killing or detaching from inferiors.
9584 2009-03-02 Joel Brobecker <brobecker@adacore.com>
9586 Remove some unused routines.
9588 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
9590 * ada-lang.c (ada_task_list_iterator_ftype)
9591 (iterate_over_live_ada_tasks): Delete.
9592 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
9595 2009-03-01 Doug Evans <dje@google.com>
9597 * symtab.c: Remove trailing whitespace throughout the file.
9598 (expand_line_sal): Fix some typos and whitespace.
9600 * Makefile.in (clean): rm -f $(DEPDIR)/*.
9602 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
9603 (init.c): signals/ -> common/.
9604 (signals.o): Update.
9605 * target.h (target_signal_to_string,target_signal_to_string)
9606 (target_signal_from_name,target_signal_to_host_p)
9607 (target_signal_from_host,target_signal_to_host): Move to ...
9608 * common/gdb_signals.h: ... here. New file.
9609 * common/signals.c: Moved here from signals/signals.c.
9610 #include gdb_signals.h, remove #include of target.h in gdb case.
9611 (target_signal_from_command,default_target_signal_to_host)
9612 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
9614 Include thread ID in target_wait debugging output.
9615 * infrun.c (print_target_wait_results): New function.
9616 (wait_for_inferior,fetch_inferior_event): Call it.
9618 2009-02-27 Pedro Alves <pedro@codesourcery.com>
9620 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
9621 with a ptid_t field.
9622 * linux-thread-db.c (thread_get_info_callback): Build the ptid
9623 using the pid stored in proc_handle.ptid.
9624 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
9625 (check_for_thread_db, thread_db_detach, check_event)
9626 (thread_db_mourn_inferior, find_new_threads_callback)
9627 (thread_db_find_new_threads_1): Adjust.
9628 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
9629 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
9631 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
9633 * valprint.c (read_string): Rework clean-up logic. Use
9634 free_current_contents to clean-up buffer.
9636 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
9638 * MAINTAINERS: Update e-mail address.
9640 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
9642 * python/python-utils.c (python_string_to_unicode): Always return
9644 (python_string_to_target_string): Decrement transient python
9646 (python_string_to_host_string): Likewise.
9648 2007-02-26 Pedro Alves <pedro@codesourcery.com>
9650 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
9651 call to super_fetch_registers.
9652 (mips64_linux_store_registers): Pass `ops' to call to
9653 super_store_registers.
9655 2009-02-25 Doug Evans <dje@google.com>
9657 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
9660 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
9661 disabled_shlib_breaks, unused.
9663 * printcmd.c (build_address_symbolic): Fix comment.
9665 2009-02-25 Hui Zhu <teawater@gmail.com>
9667 * cli/cli-script.c (define_command): Add _() to query.
9668 * gnu-nat.c (inf_validate_task_sc): Ditto.
9669 * infcmd.c (kill_if_already_running): Ditto.
9670 (jump_command): Ditto.
9671 (attach_command): Ditto.
9672 * inflow.c (kill_command): Ditto.
9673 * infrun.c (handle_command): Ditto.
9674 * maint.c (maintenance_dump_me): Ditto.
9675 * memattr.c (mem_delete_command): Ditto.
9676 * monitor.c (monitor_interrupt_query): Ditto.
9677 * nto-procfs.c (interrupt_query): Ditto.
9678 * printcmd.c (undisplay_command): Ditto.
9679 * remote-mips.c (mips_kill): Ditto.
9680 * remote.c (interrupt_query): Ditto.
9681 * solib-irix.c (irix_open_symbol_file_object): Ditto.
9682 * solib-osf.c (osf_open_symbol_file_object): Ditto.
9683 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
9684 * solib-som.c (som_open_symbol_file_object): Ditto.
9685 * solib-svr4.c (open_symbol_file_object): Ditto.
9686 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
9687 * target.c (kill_or_be_killed): Ditto.
9688 * tracepoint.c (delete_trace_command): Ditto.
9689 * top.c (quit_confirm): Add _() to s that will be used
9692 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
9694 Fix windows-nat.c compilation failure.
9696 * windows-nat.c (windows_thread_alive): Fix forward declaration.
9697 (get_windows_debug_event): Add ops parameter to call to windows_resume.
9699 2009-02-23 Pedro Alves <pedro@codesourcery.com>
9701 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
9703 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
9705 * symtab.c (find_line_symtab): Initialize exact to avoid
9708 2009-02-23 Pedro Alves <pedro@codesourcery.com>
9710 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
9711 `ops' to recursive call.
9713 2009-02-23 Pedro Alves <pedro@codesourcery.com>
9715 * corelow.c (get_core_registers): Adjust.
9716 (core_file_thread_alive): Rename to...
9717 (core_thread_alive): ... this.
9718 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
9719 (init_core_ops): Adjust.
9720 (coreops_suppress_target): Delete.
9721 (_initialize_corelow): Unconditionally add core_ops.
9722 * procfs.c: Include "inf-child.h".
9723 (procfs_ops): Delete.
9724 (init_procfs_ops): Delete. Reimplement as...
9725 (procfs_target): ... this, inheriting from inf-child.
9726 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
9727 (procfs_prepare_to_store): Delete.
9728 (procfs_store_registers, procfs_resume): Adjust.
9729 (procfs_open): Delete.
9730 (procfs_suppress_run): Delete.
9731 (procfs_can_run): Delete.
9732 (procfs_mourn_inferior): Adjust.
9733 (procfs_init_inferior): Add target_ops parameter. Adjust.
9734 (procfs_create_inferior): Don't pass procfs_init_inferior to
9735 fork_inferior. Instead call it after fork_inferior returns.
9736 (procfs_find_new_threads): Adjust.
9737 (_initialize_procfs): Adjust to use procfs_target instead of
9739 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
9740 (lwp_to_thread): Use target_thread_alive.
9741 (sol_thread_open): Delete.
9742 (sol_thread_attach): Delete.
9743 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
9744 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
9745 to use find_target_beneath.
9746 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
9747 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
9748 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
9749 (check_for_thread_db): New.
9750 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
9751 (sol_thread_new_objfile): Call check_for_thread_db.
9752 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
9753 (sol_thread_can_run): Delete.
9754 (sol_thread_alive): Adjust to use find_target_beneath.
9755 (sol_thread_stop): Delete.
9756 (rw_common): Use target_write_memory or target_read_memory.
9757 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
9758 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
9759 (solaris_pid_to_str): Remove check for libthread_db initialization
9761 (sol_find_new_threads): Remove check for libthread_db
9762 initialization failing, or for an invalid inferior_ptid. Adjust
9763 to use find_target_beneath.
9764 (sol_core_open, sol_core_close, sol_core_detach,
9765 sol_core_files_info, sol_find_memory_regions,
9766 sol_make_note_section, ignore): Delete.
9767 (init_sol_thread_ops): Make it a thread_stratum target. Remove
9768 unneeded callback settings.
9769 (init_sol_core_ops): Delete.
9770 (_initialize_sol_thread): No longer call init_sol_core_ops, set
9771 procfs_suppress_run, or hack with core_ops.
9773 * target.h (struct target_ops): Add a target_ops * parameter to
9774 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
9775 and to_find_new_threads.
9776 (target_fetch_registers, target_store_registers)
9777 (target_thread_alive, target_find_new_threads): Redeclare as
9780 * target.c (update_current_target): Do not inherit or de_fault
9781 to_resume, to_fetch_registers, to_store_registers,
9782 to_thread_alive, to_find_new_threads.
9783 (target_resume): Adjust.
9784 (target_thread_alive, target_find_new_threads): New.
9785 (debug_to_resume, debug_to_fetch_registers): Delete.
9786 (target_fetch_registers): New.
9787 (debug_to_store_registers): Delete.
9788 (target_store_registers): New.
9789 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
9790 (setup_target_debug): Adjust.
9792 * gdbcore.h (core_ops): Delete declaration.
9794 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
9795 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
9796 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
9797 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
9798 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
9799 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
9800 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
9801 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
9802 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
9803 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
9804 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
9805 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
9806 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
9807 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
9809 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
9810 * gdbarch.h, gdbarch.c: Regenerate.
9812 * sol2-tdep.c: Include "inferior.h".
9813 (sol2_core_pid_to_str): New.
9814 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
9816 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
9817 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
9818 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
9819 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
9821 2009-02-22 Doug Evans <dje@google.com>
9823 * exec.c (exec_file_attach): Fix comment.
9825 2009-02-22 Pedro Alves <pedro@codesourcery.com>
9827 Silence a few -Wmissing-prototypes warnings.
9830 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
9832 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
9833 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
9834 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
9835 (_initialize_amd64nbsd_tdep): ... this.
9836 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
9837 (_initialize_arm_linux_tdep): Declare.
9838 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
9839 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
9840 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
9841 * avr-tdep.c (avr_return_value): Make it static.
9842 (avr_frame_unwind_cache): Ditto.
9843 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
9844 (bsd_uthread_solib_loaded): Ditto.
9845 (bsd_uthread_solib_unloaded): Ditto.
9846 (bsd_uthread_target): Ditto.
9847 (_initialize_bsd_uthread): Declare.
9848 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
9849 (cris_frame_unwind_cache): Ditto.
9850 * frv-tdep.c (frv_return_value): Ditto.
9851 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
9852 (h8300h_use_struct_convention): Ditto.
9853 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
9855 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
9857 * hppabsd-tdep.c: Include hppabsd-tdep.h.
9858 (hppabsd_find_global_pointer): Make it static.
9859 * hppabsd-tdep.h: New.
9860 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
9861 (hppabsd_init_abi): Remove declaration.
9862 (_initialize_hppabsd_tdep): Remove declaration.
9863 (_initialize_hppanbsd_tdep): Declare.
9864 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
9865 (hppabsd_init_abi): Delete declaration.
9866 (hppaobsd_init_abi): Make it static.
9867 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
9868 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
9869 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
9870 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
9871 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
9872 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
9873 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
9874 (_initialize_m32c_tdep): Declare.
9875 * m32r-rom.c (_initialize_m32r_rom): Declare.
9876 * m32r-tdep.c (m32r_skip_prologue): Make it static.
9877 (m32r_return_value): Ditto.
9878 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
9879 (m68hc11_return_value): Ditto.
9880 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
9881 * m88k-tdep.c (m88k_frame_cache): Make it static.
9882 * mep-tdep.c (mep_gdb_print_insn): Ditto.
9883 (mep_return_value): Ditto.
9884 (_initialize_mep_tdep): Declare.
9885 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
9886 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
9887 (mips_linux_syscall_next_pc): Ditto.
9888 (_initialize_mips_linux_tdep): Declare.
9889 * mips-tdep.c (mips_single_step_through_delay): Make it static.
9890 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
9891 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
9892 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
9893 * mt-tdep.c (_initialize_mt_tdep): Declare.
9894 * nbsd-tdep.c: Include nbsd-tdep.h.
9895 * nto-tdep.c (find_load_phdr): Make it static.
9896 (_initialize_nto_tdep): Declare.
9897 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
9899 (_initialize_ppc_linux_tdep): Declare.
9900 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
9901 (m32r_insert_watchpoint, m32r_remove_watchpoint)
9902 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
9904 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
9905 * rs6000-nat.c: Include xcoffread.h.
9906 (find_toc_address): Don't extern declare get_toc_offset. Adjust
9907 to call xcoff_get_to_offset.
9908 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
9909 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
9910 (rs6000_skip_trampoline_code): Make static.
9911 * s390-tdep.c (s390_regset_from_core_section): Ditto.
9912 * sh-tdep.c (sh_register_reggroup_p): Ditto.
9913 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
9914 (_initialize_shnbsd_tdep): Declare.
9915 * solib-frv.c (displacement_from_map): Make static.
9916 (_initialize_frv_solib): Declare.
9917 * solib-irix.c (fetch_lm_info): Make static.
9918 (_initialize_irix_solib): Declare.
9919 * solib-som.c: Include solib-som.h.
9920 (som_solib_select): Line break.
9921 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
9922 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
9923 (_initialize_sparcnbsd_tdep): ... this.
9924 * spu-tdep.c (spu_software_single_step): Make it static.
9925 (_initialize_spu_tdep): Declare.
9926 * vax-tdep.c (vax_frame_cache): Make it static.
9927 * xcoffread.c: Include xcoffread.h.
9928 (get_toc_offset): Rename to ...
9929 (xcoff_get_toc_offset): ... this.
9930 (_initialize_xcoffread): Declare.
9932 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
9933 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
9935 (_initialize_xtensa_tdep): Declare.
9937 2008-02-21 Pedro Alves <pedro@codesorcery.com>
9939 Silence a few -Wmissing-prototypes warnings.
9942 * amd64-nat.c: Include "amd64-nat.h".
9943 * fork-child.c (_initialize_fork_child): Ditto.
9944 * gcore.c (_initialize_gcore): Ditto.
9945 * inf-ptrace.c: Include "inf-ptrace.h".
9946 (inf_ptrace_store_registers): Make it static.
9947 * linux-nat.c (linux_nat_terminal_ours): Make it static.
9948 (_initialize_linux_nat): Declare before definition.
9949 * linux-tdep.c: Include "linux-tdep.h".
9950 * linux-thread-db.c (_initialize_thread_db): Declare before
9952 * proc-service.c (_initialize_proc_service): Ditto.
9953 * remote.c (remote_send_printf): Make it static.
9954 * solib.c: Include "solib.h".
9955 * symfile-mem.c (_initialize_symfile_mem): Declare before
9957 * ada-lang.c (ada_la_decode, ada_match_name)
9958 (ada_suppress_symbol_printing, ada_is_array_type)
9959 (ada_value_ptr_subscript, ada_array_length)
9960 (ada_to_static_fixed_value): Make them static.
9961 (_initialize_ada_language): Declare before definition.
9962 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
9963 (ada_task_list_changed, ada_new_objfile_observer): Make them
9965 (_initialize_tasks): Declare before definition.
9966 * addrmap.c (_initialize_addrmap): Declare before definition.
9967 * auxv.c (default_auxv_parse): Make it static.
9968 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
9970 * breakpoint.c (remove_sal): Add line break.
9971 (expand_line_sal_maybe): Make it static.
9972 * cp-name-parser.y: Include "cp-support.h".
9973 * cp-valprint.c (cp_find_class_member): Make it static.
9974 * eval.c (value_f90_subarray): Ditto.
9975 * exceptions.c (print_any_exception): Ditto.
9976 * findcmd.c (_initialize_mem_search): Declare before definition.
9977 * frame.c (frame_observer_target_changed): Make it static.
9978 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
9979 * inf-child.c: Include "inf-child.h".
9980 * inferior.h (valid_inferior_id): Rename to ...
9981 (valid_gdb_inferior_id): ... this.
9982 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
9984 * jv-lang.c (java_language_arch_info): Make it static.
9985 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
9986 * osdata.c (info_osdata_command): Make it static.
9987 * regcache.c (regcache_observer_target_changed): Make it static.
9988 * reverse.c (_initialize_reverse): Declare before definition.
9989 * stabsread.c (cleanup_undefined_types_noname)
9990 (cleanup_undefined_types_1): Make them static.
9991 * symfile.c (place_section): Make it static.
9992 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
9993 * target-descriptions.c (_initialize_target_descriptions): Declare
9995 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
9996 (find_default_is_async_p, find_default_supports_non_stop): Make
9998 (target_supports_non_stop): Add prototype.
9999 (dummy_pid_to_str): Make it static.
10000 * utils.c (_initialize_utils): Declare before definition.
10001 * ada-exp.y (_initialize_ada_exp): Declare before definition.
10002 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
10003 * target.h (struct target_ops): Add a prototype to the
10004 to_can_execute_reverse callback.
10005 * macroscope.c (_initialize_macroscope): Declare before definition.
10006 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
10007 * python/python.c (_initialize_python): Declare before definition.
10008 * tui/tui-command.c: Include "tui/tui-command.h".
10009 * tui/tui-data.c (init_content_element, init_win_info): Make them
10011 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
10012 * tui/tui-interp.c (_initialize_tui_interp): Declare before
10014 * tui/tui-layout.c: Include "tui/tui-layout.h".
10015 (_initialize_tui_layout): Declare before definition.
10016 * tui/tui-regs.c: Include "tui/tui-regs.h".
10017 (tui_display_reg_element_at_line): Make it static.
10018 (_initialize_tui_regs): Declare before definition.
10019 * tui/tui-stack.c (_initialize_tui_stack): Declare before
10021 * tui/tui-win.c: Include "tui/tui-win.h".
10022 (_initialize_tui_win): Declare before definition.
10023 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
10024 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
10025 (tui_get_cmd_list): Add a prototype.
10026 * tui/tui-windata.c: Include tui-windata.h.
10027 * tui/tui-wingeneral.c (box_win): Make it static.
10028 * cli/cli-logging.c (show_logging_command): Make it static.
10029 (_initialize_cli_logging): Declare before definition.
10030 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
10033 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
10035 Extend use of i386_use_watchpoints to all i386 native files
10036 using hardware watchpoints.
10037 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
10038 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
10039 * windows-nat.c (init_windows_ops): Ditto.
10040 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
10041 * config/i386/nm-cygwin64.h: Ditto.
10042 * config/i386/nm-fbsd.h: Ditto.
10043 * config/i386/nm-go32.h: Ditto.
10045 2009-02-19 Joel Brobecker <brobecker@adacore.com>
10047 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
10049 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
10051 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
10052 (mi_interpreter_init): Register the above.
10053 * solib.c (clear_solib): Notify solib unload.
10054 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
10055 disable breakpoints on a.out targets.
10057 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
10059 * observer.c (observer_test_first_notification_function)
10060 (observer_test_second_notification_function)
10061 (observer_test_third_notification_function): Adjust prototype.
10063 2009-02-17 Pedro Alves <pedro@codesourcery.com>
10065 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
10066 (ALL_TARGET_OBS): Add dicos-tdep.o.
10067 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
10068 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
10070 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
10072 * dicos-tdep.h, dicos-tdep.c: New.
10073 * amd64-dicos-tdep.c: New.
10074 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
10075 inferior.h. Include dicos-tdep.h.
10076 (i386_dicos_init_abi): Call dicos_init_abi.
10077 (i386_dicos_bfd_has_symbol_p): Delete.
10078 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
10080 * NEWS: Mention x86-64 DICOS target support.
10082 2009-02-16 Doug Evans <dje@google.com>
10084 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
10085 All callers updated.
10086 (amd64_get_insn_details): Handle more 3-byte opcode insns.
10087 (amd64_breakpoint_p): Delete.
10088 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
10089 don't back up pc to the start of the int3.
10090 * i386-tdep.c: #include opcode/i386.h.
10091 (i386_skip_prefixes): New function.
10092 (i386_absolute_jmp_p): Constify argument.
10093 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
10094 (i386_breakpoint_p): Delete.
10095 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
10096 When fixing up after stepping an int3, don't back up pc to the start
10099 2009-02-16 Pedro Alves <pedro@codesourcery.com>
10101 * corelow.c (core_close): Don't hardcode the core's pid.
10102 (core_open): Find core threads before calling
10103 post_create_inferior.
10104 (add_to_thread_list, get_core_register_section): Take into account
10105 systems where the regset section names encode the pid of the
10108 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
10109 * gdbarch.h, gdbarch.c: Regenerate.
10111 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
10112 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
10113 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
10114 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
10116 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
10118 Include frame information for *stopped due to CLI commands.
10120 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
10121 * infcmd.c (finish_command_continuation): Pass '1' for
10122 'print_frame' parameter to the observer.
10123 * infrun.c (normal_stop): Don't print mi-specific information
10124 here. Pass 'stop_print_frame' to the 'print_frame' parameter
10126 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
10127 If we need to print frame, and current uiout is not the MI one,
10130 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
10132 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
10133 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
10135 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
10138 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
10139 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
10141 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
10143 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
10144 for DW_ATE_signed_char and DW_ATE_unsigned_char
10145 for pascal language.
10147 2009-02-11 Jim Meyering <meyering@redhat.com>
10148 Jan Kratochvil <jan.kratochvil@redhat.com>
10150 Avoid NULL dereference.
10151 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
10152 New variable func_type.
10154 2009-02-11 Pedro Alves <pedro@codesourcery.com>
10156 * gdbarch.c: Regenerate.
10158 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
10160 * p-lang.c (is_pascal_string_type): Fix comment.
10161 Determine exact size of char elements for GPC
10163 (pascal_printstr): Handle char width of 2 or 4.
10164 * p-valprint.c (pascal_val_print): Handle char
10167 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
10169 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
10170 inside the loop. Only call addrmap_set_empty if the compilation unit
10171 had DW_AT_high_pc and DW_AT_low_pc. Update call to
10172 scan_partial_symbols.
10173 (scan_partial_symbols): Take NEED_PC argument and pass it along with
10175 (add_partial_namespace): Take NEED_PC argument and pass it through.
10176 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
10179 2009-02-07 Pedro Alves <pedro@codesourcery.com>
10181 * NEWS: Mention inspecting extra signal information, $_siginfo,
10182 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
10184 2009-02-07 Pedro Alves <pedro@codesourcery.com>
10186 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
10189 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10191 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
10192 (compat_timer_t, compat_clock_t, struct compat_timeval)
10193 (compat_sigval_t, compat_siginfo_t): New types.
10194 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
10195 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
10196 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
10197 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
10198 (amd64_linux_siginfo_fixup): New.
10199 * linux-nat.c (linux_nat_siginfo_fixup): New.
10200 (siginfo_fixup): New.
10201 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
10202 siginfo layout expected by ptrace and the siginfo layout of the
10204 (linux_nat_set_siginfo_fixup): New.
10205 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
10207 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10209 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
10210 * infrun.c (siginfo_value_read, siginfo_value_write): New.
10211 (siginfo_value_funcs): New.
10212 (siginfo_make_value): New.
10213 (_initialize_infrun): Create the $_siginfo convenience variable.
10214 * gdbtypes.h (append_composite_type_field_aligned): Declare.
10215 * gdbtypes.c (append_composite_type_field): Rename to...
10216 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
10217 argument. Handle it.
10218 (append_composite_type_field): Rewrite on top of
10219 append_composite_type_field_aligned.
10220 * value.h (internalvar_make_value): New typedef.
10221 (struct internalvar) <make_value>: New field.
10222 (create_internalvar_type_lazy): Declare.
10223 * value.c (create_internalvar): Clear make_value.
10224 (create_internalvar_type_lazy): New.
10225 (value_of_internalvar): If make_value is set use it.
10226 (preserve_values): Skip internal variables that don't have a
10228 * gdbarch.sh (get_siginfo_type): New.
10229 * gdbarch.h, gdbarch.c: Regenerate.
10231 * linux-tdep.h, linux-tdep.c: New.
10232 * amd64-linux-tdep.c: Include "linux-tdep.h".
10233 (amd64_linux_init_abi): Register linux_get_siginfo_type and
10234 linux_get_siginfo_mapper.
10235 * i386-linux-tdep.c: Include "linux-tdep.h".
10236 (i386_linux_init_abi): Register linux_get_siginfo_type and
10237 linux_get_siginfo_mapper.
10238 * arm-linux-tdep.c: Include "linux-tdep.h".
10239 (i386_linux_init_abi): Register linux_get_siginfo_type and
10240 linux_get_siginfo_mapper.
10242 * linux-nat.c (linux_xfer_siginfo): New.
10243 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
10244 * remote.c (PACKET_qXfer_siginfo_read)
10245 (PACKET_qXfer_siginfo_write): New.
10246 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
10247 "qXfer:siginfo:write" features.
10248 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
10249 (_initialize_remote): Add "set/show remote read-siginfo-object"
10250 and "set/show remote write-siginfo-object" commands.
10252 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
10253 (HFILES_NO_SRCDIR): Add linux-tdep.h.
10254 (ALLDEPFILES): Add linux-tdep.c.
10256 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
10257 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
10260 2009-02-06 Jim Blandy <jimb@codesourcery.com>
10261 Daniel Jacobowitz <dan@codesourcery.com>
10262 Vladimir Prus <vladimir@codesourcery.com>
10263 Pedro Alves <pedro@codesourcery.com>
10265 * defs.h (enum lval_type): New value: lval_computed.
10266 * value.h (struct lval_funcs): New type.
10267 (allocate_computed_value, value_computed_funcs)
10268 (value_computed_closure): New declarations.
10269 * value.c (struct value): Add a structure to the location union
10270 for computed lvalues, containing 'funcs' and 'closure' members.
10271 (allocate_computed_value, value_computed_funcs)
10272 (value_computed_closure): New functions.
10273 (value_free): For computed lvalues, call the closure's
10274 'free_closure' function before freeing the value itself.
10275 (value_copy): If we're copying an lval_computed value, call the
10276 closure's 'copy_closure' function.
10277 (set_value_component_location): If the original value is a
10278 computed lvalue, then call the closure's 'copy_closure' function.
10279 (value_of_internalvar): If an internal variable's value is a
10280 computed lvalue, make retrieving its value produce an equivalent
10282 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
10283 their read function.
10284 (value_assign): Assign to computed lvalues by calling their write
10287 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10289 * linux-nat.c (linux_nat_wait): Adjust.
10290 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
10291 * linux-nat.h (thread_db_init): Delete declaration.
10292 * linux-thread-db.c (target_beneath): Delete.
10293 (thread_db_init): Delete.
10294 (thread_db_detach): Use find_target_beneath.
10295 (thread_db_wait): Adjust interface. Use find_target_beneath.
10296 (thread_db_mourn_inferior): Use find_target_beneath.
10297 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
10298 (thread_db_async_mask): Delete.
10299 (thread_db_pid_to_str): Adjust interface. Use
10300 find_target_beneath.
10301 (thread_db_get_thread_local_address): Adjust interface. Use
10302 find_target_beneath.
10303 (init_thread_db_ops): Delete references to delete functions.
10304 * target.c (update_current_target): Don't inherit or default
10305 to_wait. Don't inherit to_pid_to_str and
10306 to_get_thread_local_address.
10307 (target_translate_tls_address): Look for a pushed target that
10308 implements to_get_thread_local_address, and use it instead of
10309 checking for target_get_thread_local_address_p.
10310 (target_wait, target_pid_to_str): Reimplement as functions.
10311 (dummy_pid_to_str): New.
10312 (init_dummy_target): Register it.
10313 (debug_to_wait): Delete.
10314 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
10315 to_get_thread_local_address accept a pointer to struct target_ops.
10316 (target_wait): Delete macro, and declare as function.
10317 (target_pid_to_str): Likewise.
10318 (target_get_thread_local_address)
10319 (target_get_thread_local_address_p): Delete.
10320 (noprocess): Add NORETURN and ATTR_NORETURN tags.
10321 * inf-ptrace.c (inf_ptrace_wait): Adjust.
10322 (inf_ptrace_pid_to_str): New.
10323 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
10324 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
10325 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
10326 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
10328 * corelow.c (core_pid_to_str): Adjust.
10329 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
10330 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
10331 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
10332 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
10333 * hpux-thread.c (hpux_thread_wait): Adjust.
10334 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
10335 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
10336 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
10337 * procfs.c (procfs_pid_to_str): Adjust.
10338 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
10339 * remote-mips.c (mips_wait): Adjust.
10340 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
10341 * remote.c (remote_wait, remote_pid_to_str)
10342 (remote_get_thread_local_address): Adjust.
10343 * rs6000-nat.c (rs6000_wait): Adjust.
10344 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
10345 (sol_thread_wait, solaris_pid_to_str): Adjust.
10346 * spu-linux-nat.c (spu_child_wait): Adjust.
10347 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
10349 2009-02-06 Tom Tromey <tromey@redhat.com>
10351 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
10352 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
10353 (python-cmd.o): New target.
10354 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
10355 completer prototype.
10356 (add_cmd): Initialize destroyer member of cmd_list_element. Use
10357 make_symbol_completion_list_fn as completer.
10358 (delete_cmd): Call destroyer if one is set.
10359 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
10360 completer member. Add destroyer member.
10361 (set_cmd_completer): Add self parameter to
10362 completer prototype.
10363 * command.h (set_cmd_completer): Add cmd parameter to
10364 completer prototype.
10365 * completer.c (noop_completer, filename_completer,
10366 location_completer, expression_completer, command_completer): Adapt
10367 to new completer prototype.
10368 (complete_line_internal): Pass new parameter to completer function.
10369 * completer.h (noop_completer, filename_completer,
10370 location_completer, expression_completer, command_completer): Adapt
10371 prototypes to new completer prototype.
10372 * interps.c (interpreter_completer): Adapt to new completer
10374 * python/python-cmd.c: New file.
10375 * python/python-internal.h (gdbpy_initialize_commands): Add
10377 (gdbpy_doc_cst): Add forward declaration.
10378 * python/python.c (gdbpy_doc_cst): Declare.
10379 (_initialize_python): Call gdbpy_initialize_commands. Initialize
10381 * symtab.c (make_symbol_completion_list_fn): New function.
10382 * symtab.h (make_symbol_completion_list_fn): Add prototype.
10384 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10386 * target.c (target_get_osdata): Check for equal or higher than
10387 process_stratum, not dummy_stratum.
10389 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10391 * remote.c (extended_remote_can_run): Delete.
10392 (init_remote_ops): Don't register it.
10393 * target.c (target_get_osdata): Don't check for target_can_run.
10394 Instead any target that has already been pushed, otherwise
10395 fallback to the default run target.
10397 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10399 * target.c (target_create_inferior, target_detach)
10400 (target_mourn_inferior, target_attach, target_close): Do target
10402 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
10403 (debug_to_mourn_inferior, debug_to_close): Delete.
10404 (setup_target_debug): Adjust.
10406 2009-02-05 Pedro Alves <pedro@codesourcery.com>
10408 * target.h (target_stopped_data_address_p): Delete declaration,
10409 and don't define as macro.
10410 * target.c (target_stopped_data_address_p): Delete.
10412 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
10413 Tom Tromey <tromey@redhat.com>
10415 * python/python-utils.c (target_string_to_unicode): New function.
10416 * python/python-internal.h (target_string_to_unicode): New prototype.
10417 * python/python-value.c (valpy_string): New function.
10418 (value_object_methods): Add `string' entry.
10420 2009-02-05 Pedro Alves <pedro@codesourcery.com>
10422 * target.h (target_tid_to_str): Delete.
10423 * thread.c (print_thread_info, thread_apply_all_command)
10424 (thread_apply_command, thread_command, do_captured_thread_select):
10425 Use target_pid_to_str instead of target_tid_to_str.
10426 * linux-fork.c (delete_fork_command): Likewise.
10428 2009-02-05 Pedro Alves <pedro@codesourcery.com>
10430 * frame.c (has_stack_frames): Make public.
10431 (get_prev_frame): Don't allow a NULL this_frame anymore.
10432 * frame.h (has_stack_frames): Declare.
10433 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
10434 to get_prev_frame, instead start at get_current_frame.
10435 (varobj_create): Check has_stack_frames before getting any frame;
10436 eliminate one usage of deprecated_safe_get_selected_frame.
10438 2009-02-05 Tom Tromey <tromey@redhat.com>
10439 Thiago Jung Bauermann <bauerman@br.ibm.com>
10441 * python/python.c (GdbMethods): Move to bottom of file.
10442 (get_parameter, execute_gdb_command, gdbpy_write,
10443 gdbpy_flush): Remove forward declarations.
10444 (eval_python_from_control_command): Fix error checking of function
10445 PyRun_SimpleString. Fix error string.
10446 (python_command): Likewise.
10447 (execute_gdb_command): Added from_tty argument.
10449 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
10451 * language.h (language_dfn): Add la_get_string member.
10452 (LA_GET_STRING): New macro.
10453 (default_get_string): New prototype.
10454 * language.c (default_get_string): New function.
10455 (unknown_language_defn, auto_language_defn, local_language_defn): Use
10456 default_get_string for la_get_string.
10457 * c-lang.c (c_get_string): New function.
10458 (c_language_defn, cplus_language_defn, asm_language_defn): Use
10459 c_get_string for la_get_string.
10460 (minimal_language_defn): Likewise
10461 * ada-lang.c (ada_language_defn): Likewise.
10462 * f-lang.c (f_language_defn): Use default_get_string for
10464 * jv-lang.c (java_language_defn): Likewise.
10465 * m2-lang.c (m2_language_defn): Likewise.
10466 * objc-lang.c (objc_language_defn): Likewise.
10467 * p-lang.c (p_language_defn): Likewise.
10468 * scm-lang.c (scm_language_defn): Likewise.
10469 * typeprint.c (type_to_string): New function.
10470 * value.h (type_to_string): New prototype.
10471 * valprint.c (val_print_string): Factor out code for reading string
10472 from the inferior into its own function. Put 2 spaces after period
10474 (read_string): New function.
10475 * valprint.h (read_string): New prototype.
10477 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
10478 Tom Tromey <tromey@redhat.com>
10480 PR breakpoints/8079:
10481 * breakpoint.c (print_one_breakpoint): Use exp_string field
10482 to display expression of watchpoints.
10483 (mention): Likewise.
10484 (watch_command_1): Remove trailing whitespace from expression.
10485 * printcmd.c (struct display) <exp_string>: New field.
10486 (display_command): Set exp_string.
10487 (free_display): Free exp_string.
10488 (clear_displays): Use free_display.
10489 (do_one_display): Print exp_string.
10490 (display_info): Likewise.
10492 2009-02-04 Tom Tromey <tromey@redhat.com>
10493 Thiago Jung Bauermann <bauerman@br.ibm.com>
10494 Phil Muldoon <pmuldoon@redhat.com>
10496 * python/python-internal.h (gdbpy_get_value_from_history): Rename
10497 prototype to gdbpy_history.
10498 (gdbpy_is_string): Declare.
10499 (python_string_to_host_string): Declare.
10500 * python/python-utils.c (gdbpy_is_string): New function.
10501 (unicode_to_encoded_string): New function.
10502 (unicode_to_target_string): Use it.
10503 (python_string_to_host_string): New function.
10504 * python/python-value.c (valpy_address): New function.
10505 (convert_value_from_python): Use gdbpy_is_string. Change to throw
10506 Python exception instead of a GDB exception on error. Properly check
10508 (valpy_getitem): Convert field name to host string. Handle array
10509 accesses. Adapt to new behaviour of convert_value_from_python.
10510 (valpy_new): Adapt to new behaviour of convert_value_from_python.
10511 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
10512 VALPY_BITXOR, VALPY_BITOR>: New constants.
10513 (valpy_binop): Update. Adapt to new behaviour of
10514 convert_value_from_python.
10515 (valpy_invert): New function.
10516 (valpy_lsh): Likewise.
10517 (valpy_rsh): Likewise.
10518 (valpy_and): Likewise.
10519 (valpy_or): Likewise.
10520 (valpy_xor): Likewise.
10521 (valpy_richcompare): Call convert_value_from_python instead of doing
10522 conversions itself.
10523 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
10524 (gdbpy_get_value_from_history): Rename
10525 function to gdbpy_history.
10526 (gdbpy_initialize_values): Don't set tp_new.
10527 (value_object_type): Add valpy_new.
10528 (value_object_methods): Add `address' entry.
10529 (value_object_as_number): Update for new methods.
10530 * python/python.c (GdbMethods): Rename entry from
10531 `get_value_from_history' to `history'.
10533 2009-02-04 Jerome Guitton <guitton@adacore.com>
10535 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
10536 of type to guard against a crash.
10538 2009-02-04 Jerome Guitton <guitton@adacore.com>
10540 * value.c (value_from_contents_and_address): Always return
10541 a lval_memory value, even if address is null.
10543 2009-02-04 Tristan Gingold <gingold@adacore.com>
10545 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
10546 (amd64_darwin_sigcontext_addr): Ditto.
10547 (darwin_dwarf_signal_frame_p): Ditto.
10548 (i386_darwin_init_abi): Handle signal frames, use the const for
10550 (x86_darwin_init_abi_64): Ditto.
10552 2009-02-04 Tristan Gingold <gingold@adacore.com>
10554 * i386-tdep.c (i386_sigtramp_p): Make it public.
10555 * i386-tdep.h (i386_sigtramp_p): Declare.
10557 2009-02-04 Tristan Gingold <gingold@adacore.com>
10559 * machoread.c (macho_symfile_read): Read minsymtab also from
10561 (macho_symfile_read): Try to read dwarf2 frame info from main
10562 object file, but not from OSO files.
10563 (macho_symfile_offsets): Update section names for latest BFD
10565 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
10566 (x86_darwin_init_abi_64): Ditto.
10567 * solib-darwin.c: New file.
10568 * solib-darwin.h: New file.
10569 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
10571 2009-02-04 Tristan Gingold <gingold@adacore.com>
10573 * solist.h (struct target_so_ops): Comment fallback behavior for
10576 2009-02-03 Tom Tromey <tromey@redhat.com>
10578 * completer.c (add_struct_fields): Check type_name against NULL
10581 2009-02-03 Joel Brobecker <brobecker@adacore.com>
10583 * MAINTAINERS: Update Elena's email address.
10585 2009-02-02 Joel Brobecker <brobecker@adacore.com>
10587 * breakpoint (update_watchpoint): Minor comment adjustment.
10589 2009-02-02 Tom Tromey <tromey@redhat.com>
10592 * completer.c (count_struct_fields): Count method names.
10593 (add_struct_fields): Add matching method names.
10595 2009-02-02 Doug Evans <dje@google.com>
10597 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
10598 doing any further tcl/tk configury. Don't configure gdbtk if
10599 tcl or tk check fails.
10600 * aclocal.m4: Regenerate.
10601 * configure: Regenerate.
10603 2009-02-02 Tom Tromey <tromey@redhat.com>
10606 * valops.c (find_overload_match): Follow typedefs before taking
10607 address of object argument.
10609 2009-02-01 Doug Evans <dje@google.com>
10611 * target.h (target_waitstatus_to_string): Declare.
10612 * target.c (target_waitstatus_to_string): New function. Copied from
10613 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
10614 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
10615 TARGET_WAITKIND_NO_HISTORY.
10616 (debug_to_wait): Call it.
10617 * infrun.c (wait_for_inferior): If debug_infrun, print result of
10619 (fetch_inferior_event): Ditto.
10621 2009-01-30 Tom Tromey <tromey@redhat.com>
10623 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
10625 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
10628 * thread.c (do_captured_list_thread_ids): Report the current
10631 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
10633 * breakpoint.c (create_breakpoint, create_breakpoints)
10634 (break_command_really, set_breakpoint): New parameter enabled.
10635 (create_breakpoint, break_command_really): Make breakpoint
10636 disabled if so requested.
10637 * breakpoint.h (set_breakpoint): New parameter enabled.
10638 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
10640 2009-01-28 Doug Evans <dje@google.com>
10642 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
10643 (amd64_displaced_step_fixup): Declare.
10644 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
10645 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
10646 and make static global.
10647 (amd64_arch_regmap_len): New static global.
10648 (amd64_arch_reg_to_regnum): New function.
10649 (struct amd64_insn): New struct.
10650 (struct displaced_step_closure): New struct.
10651 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
10652 (rex_prefix_p,skip_prefixes)
10653 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
10654 (amd64_insn_length,amd64_get_unused_input_int_reg)
10655 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
10656 (amd64_displaced_step_copy_insn)
10657 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
10658 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
10659 (amd64_displaced_step_fixup): New functions.
10660 * amd64-linux-tdep.c: #include arch-utils.h.
10661 (amd64_linux_init_abi): Install displaced stepping support.
10663 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
10664 Jerome Guitton <guitton@adacore.com>
10666 * configure, config.in: Regenerated.
10667 * configure.ac: Add --with-system-gdbinit.
10668 * main.c (get_init_files): New.
10669 (captured_main): Use get_init_files. Load system gdbinit before
10671 (print_gdb_help): Print location of init files.
10673 2009-01-28 Pedro Alves <pedro@codesourcery.com>
10675 * corefile.c (generic_search): Delete disabled code.
10676 * gdbcore.h (generic_search): Delete declaration.
10678 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10680 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
10681 parent to the child.
10682 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
10683 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
10684 remove_breakpoints to remove breakpoints from the parent.
10686 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10688 PR backtrace/9458, PR backtrace/8864:
10689 * frame.c (create_new_frame): Update the frame's cached PC before
10690 finding its unwinder. Use frame_id_build to build the new frame's
10692 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
10693 array values from the ``args'' array values.
10695 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10697 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
10698 (create_array_type, create_set_type, init_flags_type)
10699 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
10700 with a call to XZALLOC or XCALLOC, and pairs of calls to
10701 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
10703 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10705 Add "maint set|show internal-error|internal-warning quit|corefile
10706 ask|yes|no" commands.
10709 * utils.c (internal_problem_ask, internal_problem_yes)
10710 (internal_problem_no, internal_problem_modes): New.
10711 (struct internal_problem): Remove FIXME. Make should_quit and
10712 should_dump_core types to char *.
10713 (internal_vproblem, internal_error_problem)
10714 (internal_warning_problem): Adjust.
10715 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
10717 (add_internal_problem_command): New.
10718 (_initialize_utils): New.
10720 2009-01-25 Pedro Alves <pedro@codesourcery.com>
10722 * infcmd.c (program_info): Use paddress instead of casting stop_pc
10725 2009-01-24 Pedro Alves <pedro@codesourcery.com>
10727 * infrun.c (normal_stop): Don't call
10728 deprecated_update_frame_pc_hack.
10729 * frame.c (deprecated_update_frame_pc_hack)
10730 (deprecated_update_frame_base_hack): Delete, and ...
10731 (create_new_frame): ... inline here.
10732 * frame.h (deprecated_update_frame_pc_hack)
10733 (deprecated_update_frame_base_hack): Delete declarations.
10735 2009-01-23 Pedro Alves <pedro@codesourcery.com>
10737 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
10738 * cli/cli-setshow.c (do_setshow_command): Handle it.
10739 * command.h (enum var_types): Add var_zuinteger.
10740 (add_setshow_zuinteger_cmd): Declare.
10742 * valprint.c (_initialize_valprint): Change the set input-radix
10743 and set output-radix commands to zuinteger type.
10745 2009-01-23 Pedro Alves <pedro@codesourcery.com>
10748 * infrun.c (normal_stop): Tag threads as stopped, and run the
10749 hook-stop before printing the stack frame.
10751 2009-01-22 Pedro Alves <pedro@codesourcery.com>
10754 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
10757 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
10759 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
10762 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
10765 * infcmd.c (signal_command): Do not specify a resume PC.
10767 2009-01-19 Doug Evans <dje@google.com>
10769 * dummy-frame.c (dummy_frame): Replace regcache member with
10771 (dummy_frame_push): Replace caller_regcache arg with caller_state.
10772 All callers updated.
10773 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
10774 (dummy_frame_pop): Rewrite. Verify requested frame is in the
10775 dummy frame stack. Restore program state.
10776 (cleanup_dummy_frames): Rewrite.
10777 (dummy_frame_sniffer): Update. Make static.
10778 * dummy-frame.h (regcache,frame_info): Delete forward decls.
10779 (inferior_thread_state): New forward decl.
10780 (dummy_frame_push): Update prototype.
10781 * frame.c (frame_pop): dummy_frame_pop now does all the work for
10783 * infcall.c (breakpoint_auto_delete_contents): Delete.
10784 (get_function_name,run_inferior_call): New fns.
10785 (call_function_by_hand): Simplify by moving some code to
10786 get_function_name, run_inferior_call. Inferior function call wrapped
10787 in TRY_CATCH so there's less need for cleanups and all exits from
10788 proceed are handled similarily. Detect program exit.
10789 Detect program stopping in a different thread.
10790 Make error messages more consistent.
10791 * inferior.h (inferior_thread_state): Declare (opaque type).
10792 (save_inferior_thread_state,restore_inferior_thread_state,
10793 make_cleanup_restore_inferior_thread_state,
10794 discard_inferior_thread_state, get_inferior_thread_state_regcache):
10796 (save_inferior_status): Update prototype.
10797 * infrun.c: (normal_stop): When stopped for the completion of an
10798 inferior function call, verify the expected stack frame kind.
10799 (inferior_thread_state): New struct.
10800 (save_inferior_thread_state,restore_inferior_thread_state,
10801 do_restore_inferior_thread_state_cleanup,
10802 make_cleanup_restore_inferior_thread_state,
10803 discard_inferior_thread_state,
10804 get_inferior_thread_state_regcache): New functions.
10805 (inferior_status): Move stop_signal, stop_pc, registers to
10806 inferior_thread_state. Remove restore_stack_info.
10807 (save_inferior_status): Remove arg restore_stack_info.
10808 All callers updated. Remove saving of state now saved by
10809 save_inferior_thread_state.
10810 (restore_inferior_status): Remove restoration of state now done by
10811 restore_inferior_thread_state.
10812 (discard_inferior_status): Remove freeing of registers, now done by
10813 discard_inferior_thread_state.
10815 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10817 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
10818 at a time, times NUM_TO_SCROLL.
10819 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
10820 fetch the selected frame if there is no stack.
10822 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10825 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
10827 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
10828 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
10829 is thrown while handling an event, finish the thread state.
10830 (normal_stop): Use finish_thread_state cleanup.
10831 * infcmd.c (run_command_1): If an error is thrown while starting
10832 the inferior, finish the thread state.
10834 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10836 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
10837 skip breakpoints without a location (pending breakpoints).
10839 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10842 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
10844 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
10846 * thread.c (thread_command): Move call to annotate_thread_changed
10848 (do_captured_thread_select): ... here, to avoid printing an
10849 annotation if the thread change generates an exception.
10851 2009-01-16 Joel Brobecker <brobecker@adacore.com>
10853 * NEWS: Document x86_64/MinGW as a new native configuration.
10855 2009-01-16 Joel Brobecker <brobecker@adacore.com>
10857 * NEWS: Move the documentation of "info os processes" to
10858 the appropriate section (documenting the new commands).
10860 2009-01-15 Doug Evans <dje@google.com>
10862 * target.h (target_signal_to_string): Make return type const char *.
10863 (target_signal_to_name): Ditto.
10864 (target_signal_from_name): Make arg const char *.
10865 * infrun.c (sig_print_info): Update.
10866 * signals/signals.c (signals): Make array and struct members const.
10867 (target_signal_to_string): Make return type const char *.
10868 (target_signal_to_name): Ditto.
10869 (target_signal_from_name): Make arg const char *.
10871 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10872 Tristan Gingold <gingold@adacore.com>
10874 * solist.h (struct target_so_ops): New member bfd_open.
10875 (solib_find): Add prototype.
10876 (solib_bfd_fopen): Add prototype.
10877 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
10878 from solib_bfd_open.
10879 (solib_bfd_open): Use ops->bfd_open override if present. Call
10880 solib_find and solib_bfd_open otherwise.
10882 * objfiles.h (OBJF_KEEPBFD): New define.
10883 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
10884 objfile flag is set.
10885 * solib.c (symbol_add_stub): Do not allocate second BFD for
10886 shared library; use OBJF_KEEPBFD flag on solib objfile.
10888 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10890 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
10892 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10894 * value.h (address_of_variable): Add prototype.
10895 (locate_var_value): Remove prototype.
10897 * findvar.c (read_var_value): Do not attempt to default frame
10899 (locate_var_value): Remove function.
10900 * valops.c (value_of_variable): Retrieve selected frame for
10901 symbols that require a frame when called with NULL block.
10902 * valops.c (address_of_variable): New function.
10904 * eval.c (evaluate_subexp_for_address): Call address_of_variable
10905 instead of calling locate_var_value.
10906 (evaluate_subexp_with_coercion): Likewise.
10908 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
10910 * NEWS: Document "define" for prefixed commands.
10911 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
10912 show_user_1 for prefix commands.
10913 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
10914 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
10915 commands. Return the containing command list.
10916 (define_command, document_command): Update to handle prefix commands.
10917 (show_user_1): Add prefix and name arguments. Handle prefix
10919 * cli/cli-script.h (show_user_1): Update prototype.
10921 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
10923 * ser-mingw.c (console_select_thread): Add return to make
10925 (pipe_select_thread): Likewise.
10926 (file_select_thread): Likewise.
10928 2009-01-14 Pedro Alves <pedro@codesourcery.com>
10930 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
10933 2009-01-14 Pedro Alves <pedro@codesourcery.com>
10935 * remote.c (extended_remote_mourn_1): Invalidate our notion of
10936 current general thread.
10938 2009-01-14 Pedro Alves <pedro@codesourcery.com>
10940 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
10941 without a live selected thread.
10943 2009-01-14 Joel Brobecker <brobecker@adacore.com>
10945 Update the copyright notice of some of the files I missed
10946 in the previous copyright update.
10948 2009-01-14 Joel Brobecker <brobecker@adacore.com>
10950 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
10951 base address instead of casting it to DWORD.
10953 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
10955 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
10956 for NULL frame pointers.
10958 2009-01-13 Mark Kettenis <kettenis@gnu.org>
10960 * utils.c (host_address_to_string): Reimplement in a way that
10961 avoids the cast of the address to long.
10963 2009-01-13 Joel Brobecker <brobecker@adacore.com>
10965 * mdebugread.c (parse_symbol): Save the symbol private data
10966 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
10967 (psymtab_to_symtab_1): Likewise.
10968 (parse_procedure): Declare variable "e" only in the scope
10969 where it is used. Extract the symbol private data using
10970 SYMBOL_VALUE_BYTES.
10972 2009-01-13 Jim Blandy <jimb@codesourcery.com>
10974 Abstract out common code for copying value locations.
10976 * value.h (set_value_component_location): New declaration.
10977 * value.c (set_value_component_location): New function.
10978 (value_primitive_field): Use it.
10979 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
10980 * valops.c (search_struct_field, value_slice): Same.
10981 * ada-lang.c (coerce_unspec_val_to_type)
10982 (ada_value_primitive_packed_val): Same.
10984 2009-01-13 Joel Brobecker <brobecker@adacore.com>
10986 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
10988 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
10990 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
10992 * i386-cygwin-tdep.c: Ditto.
10993 * i386-windows-nat.c: Ditto.
10994 * windows-nat.h: Ditto.
10995 * windows-tdep.c: Ditto.
10996 * windows-tdep.h: Ditto.
10997 * windows-nat.c: Ditto.
10998 (cygwin_load_start): Redefine as CORE_ADDR.
10999 (cygwin_load_end): Ditto.
11000 (windows_make_so): Coerce result of address arithmetic to uintptr_t
11001 before coercing to CORE_ADDR to avoid a compiler warning.
11002 (handle_exception): Define addr as CORE_ADDR and coerce
11003 ExceptionAddress to uintptr_t before assigining to avoid a compiler
11005 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
11008 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
11010 Fix linking with --enable-targets=all:
11011 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
11012 (HFILES_NO_SRCDIR): Add windows-tdep.h.
11013 (ALLDEPFILES): Add windows-tdep.c.
11015 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
11017 * win32-nat.h: Delete.
11018 * windows-nat.h: Rename from win32-nat.h.
11019 * win32-nat.c: Delete.
11020 * windows-nat.c: Rename from win32-nat.c.
11021 * win32-termcap.c: Delete.
11022 * windows-termcap.c: Rename from win32-termcap.c.
11023 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
11024 * configure.ac: Handle rename from win32-termcap.c ->
11026 * configure: Regenerate.
11027 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
11028 -> windows-termcap.c.
11029 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
11031 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
11032 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
11034 (win32_make_so): Handle cygwin compiler warning due to change of
11035 load_addr from DWORD to LPVOID.
11036 (handle_load_dll): Use %p in format string to properly print address
11037 and avoid a compiler warning.
11038 (DEBUG_EXCEPTION_SIMPLE): Ditto.
11039 (handle_exception): Ditto.
11040 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
11041 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
11043 * config/i386/mingw.mh: Ditto.
11044 * config/i386/mingw64.mh: Ditto.
11046 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
11048 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
11049 arrayprint_recurse_level to a parameter. Update all the callers. New
11050 comment at autovariables.
11052 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
11054 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
11057 2009-01-11 Joel Brobecker <brobecker@adacore.com>
11059 * target.c (target_xfer_partial): Use host_address_to_string to
11060 print the address of readbuf and writebuf. Cast the address of
11061 elements inside the myaddr buffer into intptr_t.
11062 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
11063 Cast the address of elements inside the myaddr buffer into
11066 2009-01-11 Joel Brobecker <brobecker@adacore.com>
11068 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
11069 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
11070 * configure.host, configure.tgt: Add handling for x86_64/windows.
11071 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
11072 and amd64-windows-tdep.c.
11074 2009-01-11 Joel Brobecker <brobecker@adacore.com>
11076 * win32-tdep.h, win32-tdep.c: New files.
11077 * i386-cygwin-tdep.h: Delete.
11078 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
11079 i386-cygwin-tdep.h.
11080 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
11081 * win32-nat.c: Likewise.
11082 * configure.tgt: Add win32-tdep.o to the list of target object
11083 files for i386-cygwin and i386-mingw targets.
11085 2009-01-11 Joel Brobecker <brobecker@adacore.com>
11087 * win32-nat.h: New file.
11088 * win32-nat.c (mappings): Initialize to NULL.
11089 (win32_set_context_register_offsets): New function.
11090 * i386-windows-nat.c: New file.
11091 (mappings): Moved here from win32-nat.c.
11092 (_initialize_i386_windows_nat): New function.
11093 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
11094 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
11096 2009-01-09 Andreas Schwab <schwab@suse.de>
11098 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
11100 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
11102 * gdbtypes.c (append_composite_type_field): Correct the location of
11105 2009-01-09 Pedro Alves <pedro@codesourcery.com>
11107 * defs.h (deprecated_error_hook): Delete declaration.
11108 * interps.c (clear_interpreter_hooks): Adjust.
11109 * remote-sim.c (gdb_os_error): Don't try to call
11110 deprecated_error_hook. No need to call exit anymore.
11111 * top.c (deprecated_error_hook): Delete.
11113 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11115 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
11116 to print the address of the gdbarch pointer.
11118 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11120 * gdbarch.sh: Fix all the compilation errors on amd64-windows
11121 due to casting a pointer to a long when printing a function
11122 address. Instead, use host_address_to_string to convert our
11123 address to a string.
11124 * gdbarch.c: Regenerate.
11126 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11128 * event-top.c (async_disconnect, async_stop_sig): use "raise"
11129 instead of "kill" to raise a signal.
11131 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11133 * win32-nat.c (get_module_name): Change the type of parameter
11134 "base_address" to LPVOID. Remove unnecessary cast.
11135 (struct lm_info): Change type of load_addr to LPVOID.
11136 (win32_make_so): Change the type of parameter "load_addr"
11137 to LPVOID. Remove some unnecessary casts.
11138 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
11139 (win32_xfer_shared_libraries): Add missing cast.
11141 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11143 * win32-nat.c (has_detach_ability, set_process_privilege):
11144 Cast the result of GetProcAddress to (void *) to avoid
11145 a compilation warning.
11147 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11149 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
11152 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11154 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
11155 definition of local variable "done".
11156 (info_w32_command, handle_exception): Remove unnecessary cast.
11158 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11160 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
11161 DebugSetProcessKillOnExit. Update all uses in this file.
11162 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
11163 Update all uses in this file.
11165 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11167 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
11168 and use it when pushing the target.
11169 (win32_attach, win32_create_inferior): Update call to
11170 do_initial_win32_stuff.
11171 (win32_detach, win32_mourn_inferior): Use our ops parameter
11172 instead of the global win32_ops to unpush the target.
11174 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11176 * ser-mingw.c (ser_windows_open): Use proper type when casting
11177 in call to _open_osfhandle.
11179 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
11181 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
11183 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11185 * CONTRIBUTE: Minor reformatting.
11187 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
11189 * MAINTAINERS: Add myself to Write After Approval.
11190 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
11193 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
11195 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
11196 Call exit to make it obvious to GCC.
11198 2009-01-08 Tom Tromey <tromey@redhat.com>
11200 PR breakpoints/9350:
11201 * varobj.c (varobj_invalidate): Unconditionally free
11203 * symfile.c (syms_from_objfile): Free local_addr when returning
11205 * exec.c (exec_file_attach): Do cleanups before returning.
11206 (exec_file_command): Likewise.
11207 * corefile.c (reopen_exec_file): Do cleanups before returning.
11208 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
11210 (do_vec_free): New function.
11211 (update_global_location_list): Make a cleanup for old_locations.
11212 Do cleanups before returning. Remove unused variable 'e'.
11213 (find_condition_and_thread): Free result of parsing the
11215 (print_it_typical): Do cleanups before returning.
11216 (breakpoint_re_set_one): Always free sals.sals.
11218 2009-01-08 Joel Brobecker <brobecker@adacore.com>
11219 Emi Suzuki <emi-suzuki@tjsys.co.jp>
11221 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
11224 2009-01-07 Doug Evans <dje@google.com>
11226 * top.c (gdb_prompt_string): Delete, unused.
11228 2009-01-07 Pedro Alves <pedro@codesourcery.com>
11230 Delete ONE_PROCESS_WRITETEXT leftovers.
11232 * breakpoint.c (insert_bp_location): Delete process_warning
11234 (insert_breakpoint_locations): Adjust.
11235 (reattach_breakpoints): Adjust.
11236 * infrun.c (normal_stop): Drop "It might be running in another
11239 2009-01-07 Stan Shebs <stan@codesourcery.com>
11241 * config/pa/linux.mh (XDEPFILES): Remove.
11243 2009-01-07 Doug Evans <dje@google.com>
11245 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
11247 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
11249 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
11250 spacing, a regression from 2008-04-22.
11252 2009-01-07 Joel Brobecker <brobecker@adacore.com>
11254 * utils.c (gdb_print_host_address): Adjust implementation to
11255 reuse host_address_to_string. Move comment explaining the conversion
11256 from host address to string from here...
11257 (host_address_to_string): ... to there.
11259 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
11261 * MAINTAINERS: Add myself for write after approval privileges.
11263 2009-01-06 Tom Tromey <tromey@redhat.com>
11265 * value.c (set_internalvar): Use value_free, not xfree.
11267 2009-01-06 Jim Blandy <jimb@red-bean.com>
11269 Check return values of functions declared with warn_unused_result
11270 attribute in GLIBC 2.8.
11271 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
11272 * inflow.c (check_syscall): New function.
11273 (new_tty): Use check_syscall to check return values from open and dup.
11274 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
11275 * main.c (captured_main): Call cwd after setting up gdb_stderr;
11276 check for errors from getcwd.
11277 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
11278 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
11279 (stdio_file_fputs): Same.
11280 * utils.c (internal_vproblem): abort if last-ditch error message
11283 * top.c (gdb_init): Don't set the current directory here; that's
11284 already been done in captured_main.
11286 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
11288 * ser-tcp.c: Adjust includes.
11289 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
11290 (tcp_auto_retry, tcp_retry_limit): Declare.
11291 (TIMEOUT): Remove, in favor of tcp_retry_limit.
11292 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
11293 (wait_for_connect): New function.
11294 (net_open): Use it. Add auto-retry logic.
11295 (set_tcp_cmd, show_tcp_cmd): New functions.
11296 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
11297 and "set/show tcp connect-timeout" commands.
11298 * NEWS: Document new commands.
11300 2009-01-05 Tom Tromey <tromey@redhat.com>
11302 * python/python-internal.h (Py_ssize_t): Define as int.
11304 2009-01-05 Jim Blandy <jimb@red-bean.com>
11306 * MAINTAINERS: Fix my e-mail address as steering committee member.
11308 2009-01-03 Joel Brobecker <brobecker@adacore.com>
11310 Updated copyright notices for most files.
11312 2009-01-03 Joel Brobecker <brobecker@adacore.com>
11314 * top.c (print_gdb_version): Update copyright year.
11316 2009-01-03 Joel Brobecker <brobecker@adacore.com>
11318 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
11320 2009-01-01 Pedro Alves <pedro@codesourcery.com>
11322 PR breakpoints/9681:
11323 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
11324 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
11325 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
11326 retrow all other exceptions.
11328 For older changes see ChangeLog-2008.
11334 version-control: never
OSDN Git Service
