OSDN Git Service

Update/correct copyright notices.
[pf3gnuchains/pf3gnuchains3x.git] / gdb / testsuite / gdb.base / display.exp
1 #   Copyright 1997, 1998, 1999, 2000
2 #   Free Software Foundation, Inc.
3
4 # This program is free software; you can redistribute it and/or modify
5 # it under the terms of the GNU General Public License as published by
6 # the Free Software Foundation; either version 2 of the License, or
7 # (at your option) any later version.
8
9 # This program is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12 # GNU General Public License for more details.
13
14 # You should have received a copy of the GNU General Public License
15 # along with this program; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
17
18 # Please email any bugs, comments, and/or additions to this file to:
19 # bug-gdb@prep.ai.mit.edu
20
21 # display.exp   Test display commands
22 #               Also do some printing stuff for coverage's sake.
23 #
24 if $tracelevel then {
25         strace $tracelevel
26 }
27
28 set testfile display
29 set srcfile  ${srcdir}/${subdir}/${testfile}.c
30 set binfile  ${objdir}/${subdir}/${testfile}
31
32
33
34 if  { [gdb_compile "${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
35     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
36 }
37 if [target_info exists gdb_stub] {
38     gdb_step_for_stub;
39 }
40
41
42 # use this to debug:
43 #log_user 1
44
45 gdb_exit
46 gdb_start
47 gdb_reinitialize_dir $srcdir/$subdir
48 gdb_load ${binfile}
49
50 # Some coverage stuff
51 #
52 if ![target_info exists use_gdb_stub] {
53     gdb_test "kill" ".*The program is not being run.*"
54     gdb_test "detach" ".*"
55     gdb_test "run" ".*"
56
57     gdb_load ${binfile}
58     gdb_test "kill" ".*" "kill again"
59     gdb_test "detach" ".*" "detach again"
60
61     gdb_exit
62     gdb_start
63     gdb_reinitialize_dir $srcdir/$subdir
64     gdb_load ${binfile}
65 }
66
67 # Ok, on to real life
68 #
69 if ![runto_main] then {
70     fail "Could not run to main - other tests will fail."
71     continue
72 }
73
74 # Disable hardware watchpoints if necessary.
75 if [target_info exists gdb,no_hardware_watchpoints] {
76     gdb_test "set can-use-hw-watchpoints 0" "" ""
77 }
78
79 gdb_test "break 14" ".*Breakpoint 2.*"           "break  do_loops"
80 gdb_test "cont"     ".*Breakpoint 2, do_loops.*" "get to do_loops"
81
82 # Create stopping points.
83 #
84 gdb_test "watch sum"    ".*\[Ww\]atchpoint 3: sum.*" "set watch"
85 gdb_test "break 19"     ".*Breakpoint 4.*" "break 19"
86
87 # Create displays for those points
88 #
89 gdb_test "info disp" ".*There are no auto-display expressions now..*" "inf disp"
90 gdb_test "disp i" ".*1: i = 0.*" "display i"
91 gdb_test "disp/x j" ".*2: /x j = 0x0.*" "display j"
92 gdb_test "disp/i &k" ".*3: x/i &k  $hex:.*" "display &k"
93 gdb_test "disp/f sum" ".*4: /f sum = 0.*" "display/f sum"
94 gdb_test "disp/s &sum" ".*5: x/s &sum  $hex.*sum.:.*" "display/s &sum"
95
96 # Hit the displays
97 #
98 gdb_test "cont" ".*\[Ww\]atchpoint 3: sum.*\[1-9\]*: x/s &sum.*\[1-9\]*: /f sum = 1.40129846e.45\r\n\[1-9\]*: x/i &k.*\r\n\[1-9\]*: /x j = 0x0\r\n\[1-9\]*: i = 0.*" "first disp"
99 gdb_test "cont" ".*\[Ww\]atchpoint 3: sum.*\[1-9\]*: x/s &sum.*\[1-9\]*: /f sum = 2.80259693e.45\r\n\[1-9\]*: x/i &k.*\r\n\[1-9\]*: /x j = 0x0.*\[1-9\]*: i = 0.*" "second disp"
100
101 gdb_test "enab  disp 6" ".*No display number 6..*" "catch err"
102 gdb_test "disab disp 1" ".*" "disab disp 1"
103 gdb_test "disab disp 2" ".*" "disab disp 2"
104 gdb_test "enab disp 1"  ".*" "re-enab"
105 gdb_test "enab disp 1"  ".*" "re-enab of enab"
106 gdb_test "undisp 5"     ".*" "undisp"
107 gdb_test "info disp"    ".*Auto-display expressions now in effect.*y  /f sum.*y  /1bi &k.*n  /x j.*y  i.*" "info disp"
108
109 gdb_test "cont" ".*\[Ww\]atch.*4.20389539e-45.*.*i = 0.*" "next hit"
110
111 send_gdb "undisp\n"
112 gdb_expect {
113     -re ".*Delete all auto-display expressions.*y or n. $" {
114         send_gdb "y\n"
115         gdb_expect {
116             -re "y\r\n$gdb_prompt $" {
117                 pass "undisp all"
118             }
119             -re ".*$gdb_prompt $" {
120                 fail "some un-helpful response"
121             }
122             -re ".*Delete all.*$" {
123                 fail "re-ask question"
124             }
125             timeout { fail "timeout" }
126         }
127     }
128     -re ".*$gdb_prompt $" {
129         fail "undisp all"
130     }
131     timeout { fail "timeout" }
132 }
133
134 gdb_test "disab 3" ".*.*" "disab 3"
135 gdb_test "cont" ".*Breakpoint 4.*" "watch off"
136
137 # Now the printf tests
138 #
139 # The "finish" command may leave us mid-line in the caller on some
140 # targets, including but not limited to the m68k, i386 & PA.  So we
141 # have to arrange to step until we hit the line with the call to
142 # "do_vars".
143 send_gdb "finish\n"
144 gdb_expect {
145     -re ".*do_loops\\(\\);.*$gdb_prompt $" {
146         send_gdb "step\n"
147         exp_continue
148     }
149     -re ".*do_vars.*$gdb_prompt $" {
150         pass "finish"
151     }
152     -re ".*$gdb_prompt $" {
153         fail "finish"
154         gdb_suppress_tests
155     }
156     timeout  {
157         fail "(timeout) finish"
158         gdb_suppress_tests
159     }
160 }
161
162 gdb_test "step"      ".*do_vars.*.*27.*"
163 gdb_test "tbreak 37" ".*Breakpoint 5 a.*"
164 gdb_test "cont"      ".*do_vars.*37.*37.*"
165
166 # Beat on printf a bit
167 #
168 gdb_test "printf" ".*Argument required.*"
169 gdb_test "printf %d" ".*Bad format string, missing.*"
170 gdb_test "printf \"%d" ".*Bad format string, non-terminated.*"
171 gdb_test "printf \"%d%d\",i" ".*Wrong number of arguments.*"
172 gdb_test "printf \"\\\\!\\a\\f\\r\\t\\v\\b\\n\"" ".*!.*"
173 gdb_test "printf \"\"" ".*" "re-set term"
174 gdb_test "printf \"\\w\"" ".*Unrecognized escape character.*"
175 gdb_test "printf \"%d\" j" ".*Invalid argument syntax.*"
176
177 # play with "print", too
178 #
179 gdb_test "print/r j" ".*Undefined output format.*"
180 gdb_test "print j"   ".*" "debug test output"
181
182 # x/0 j doesn't produce any output and terminates PA64 process when testing
183 if [istarget "hppa2.0w-hp-hpux11*"] {
184     xfail "'x/0 j' terminates PA64 process - skipped test point"
185 } else {
186     gdb_test "x/0 j" ".*"
187 }
188 if [istarget "hppa*-hp-hpux*"] {
189     # on HP-UX you could access the first page without getting an error
190     gdb_test "x/rx j" ".*(Cannot access|Error accessing) memory.*|.*0xa:\[ \t\]*\[0-9\]+.*"
191 }
192 gdb_test "print/0 j" ".*Item count other than 1 is meaningless.*" "print/0 j"
193 gdb_test "print/s sum" ".*Format letter.*is meaningless.*" " no s"
194 gdb_test "print/i sum" ".*Format letter.*is meaningless.*.*" "no i"
195 gdb_test "print/a &sum" ".*= $hex.*<sum>.*"
196 # If the constant below is larger than the length of main, then
197 # this test will (incorrectly) fail.  So use a small number.
198 gdb_test "print/a main+4" ".*= $hex.*<.*>.*"
199 gdb_test "print/a \$pc" ".*= $hex.*<do_vars+.*>.*"
200 gdb_test "print/a &&j" ".*A .* error in expression.*"
201
202 # Done!
203 #
204 gdb_exit
205 return 0