OSDN Git Service

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
[qmiga/qemu.git] / hw / ide / via.c
1 /*
2  * QEMU IDE Emulation: PCI VIA82C686B support.
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  * Copyright (c) 2006 Openedhand Ltd.
6  * Copyright (c) 2010 Huacai Chen <zltjiangshi@gmail.com>
7  *
8  * Permission is hereby granted, free of charge, to any person obtaining a copy
9  * of this software and associated documentation files (the "Software"), to deal
10  * in the Software without restriction, including without limitation the rights
11  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12  * copies of the Software, and to permit persons to whom the Software is
13  * furnished to do so, subject to the following conditions:
14  *
15  * The above copyright notice and this permission notice shall be included in
16  * all copies or substantial portions of the Software.
17  *
18  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
21  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24  * THE SOFTWARE.
25  */
26 #include "qemu/osdep.h"
27 #include "hw/hw.h"
28 #include "hw/pci/pci.h"
29 #include "hw/isa/isa.h"
30 #include "sysemu/sysemu.h"
31 #include "sysemu/dma.h"
32
33 #include "hw/ide/pci.h"
34 #include "trace.h"
35
36 static uint64_t bmdma_read(void *opaque, hwaddr addr,
37                            unsigned size)
38 {
39     BMDMAState *bm = opaque;
40     uint32_t val;
41
42     if (size != 1) {
43         return ((uint64_t)1 << (size * 8)) - 1;
44     }
45
46     switch (addr & 3) {
47     case 0:
48         val = bm->cmd;
49         break;
50     case 2:
51         val = bm->status;
52         break;
53     default:
54         val = 0xff;
55         break;
56     }
57
58     trace_bmdma_read_via(addr, val);
59     return val;
60 }
61
62 static void bmdma_write(void *opaque, hwaddr addr,
63                         uint64_t val, unsigned size)
64 {
65     BMDMAState *bm = opaque;
66
67     if (size != 1) {
68         return;
69     }
70
71     trace_bmdma_write_via(addr, val);
72     switch (addr & 3) {
73     case 0:
74         bmdma_cmd_writeb(bm, val);
75         break;
76     case 2:
77         bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
78         break;
79     default:;
80     }
81 }
82
83 static const MemoryRegionOps via_bmdma_ops = {
84     .read = bmdma_read,
85     .write = bmdma_write,
86 };
87
88 static void bmdma_setup_bar(PCIIDEState *d)
89 {
90     int i;
91
92     memory_region_init(&d->bmdma_bar, OBJECT(d), "via-bmdma-container", 16);
93     for(i = 0;i < 2; i++) {
94         BMDMAState *bm = &d->bmdma[i];
95
96         memory_region_init_io(&bm->extra_io, OBJECT(d), &via_bmdma_ops, bm,
97                               "via-bmdma", 4);
98         memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
99         memory_region_init_io(&bm->addr_ioport, OBJECT(d),
100                               &bmdma_addr_ioport_ops, bm, "bmdma", 4);
101         memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
102     }
103 }
104
105 static void via_reset(void *opaque)
106 {
107     PCIIDEState *d = opaque;
108     PCIDevice *pd = PCI_DEVICE(d);
109     uint8_t *pci_conf = pd->config;
110     int i;
111
112     for (i = 0; i < 2; i++) {
113         ide_bus_reset(&d->bus[i]);
114     }
115
116     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_WAIT);
117     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
118                  PCI_STATUS_DEVSEL_MEDIUM);
119
120     pci_set_long(pci_conf + PCI_BASE_ADDRESS_0, 0x000001f0);
121     pci_set_long(pci_conf + PCI_BASE_ADDRESS_1, 0x000003f4);
122     pci_set_long(pci_conf + PCI_BASE_ADDRESS_2, 0x00000170);
123     pci_set_long(pci_conf + PCI_BASE_ADDRESS_3, 0x00000374);
124     pci_set_long(pci_conf + PCI_BASE_ADDRESS_4, 0x0000cc01); /* BMIBA: 20-23h */
125     pci_set_long(pci_conf + PCI_INTERRUPT_LINE, 0x0000010e);
126
127     /* IDE chip enable, IDE configuration 1/2, IDE FIFO Configuration*/
128     pci_set_long(pci_conf + 0x40, 0x0a090600);
129     /* IDE misc configuration 1/2/3 */
130     pci_set_long(pci_conf + 0x44, 0x00c00068);
131     /* IDE Timing control */
132     pci_set_long(pci_conf + 0x48, 0xa8a8a8a8);
133     /* IDE Address Setup Time */
134     pci_set_long(pci_conf + 0x4c, 0x000000ff);
135     /* UltraDMA Extended Timing Control*/
136     pci_set_long(pci_conf + 0x50, 0x07070707);
137     /* UltraDMA FIFO Control */
138     pci_set_long(pci_conf + 0x54, 0x00000004);
139     /* IDE primary sector size */
140     pci_set_long(pci_conf + 0x60, 0x00000200);
141     /* IDE secondary sector size */
142     pci_set_long(pci_conf + 0x68, 0x00000200);
143     /* PCI PM Block */
144     pci_set_long(pci_conf + 0xc0, 0x00020001);
145 }
146
147 static void vt82c686b_init_ports(PCIIDEState *d) {
148     static const struct {
149         int iobase;
150         int iobase2;
151         int isairq;
152     } port_info[] = {
153         {0x1f0, 0x3f6, 14},
154         {0x170, 0x376, 15},
155     };
156     int i;
157
158     for (i = 0; i < 2; i++) {
159         ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(d), i, 2);
160         ide_init_ioport(&d->bus[i], NULL, port_info[i].iobase,
161                         port_info[i].iobase2);
162         ide_init2(&d->bus[i], isa_get_irq(NULL, port_info[i].isairq));
163
164         bmdma_init(&d->bus[i], &d->bmdma[i], d);
165         d->bmdma[i].bus = &d->bus[i];
166         ide_register_restart_cb(&d->bus[i]);
167     }
168 }
169
170 /* via ide func */
171 static void vt82c686b_ide_realize(PCIDevice *dev, Error **errp)
172 {
173     PCIIDEState *d = PCI_IDE(dev);
174     uint8_t *pci_conf = dev->config;
175
176     pci_config_set_prog_interface(pci_conf, 0x8a); /* legacy ATA mode */
177     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
178
179     qemu_register_reset(via_reset, d);
180     bmdma_setup_bar(d);
181     pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
182
183     vmstate_register(DEVICE(dev), 0, &vmstate_ide_pci, d);
184
185     vt82c686b_init_ports(d);
186 }
187
188 static void vt82c686b_ide_exitfn(PCIDevice *dev)
189 {
190     PCIIDEState *d = PCI_IDE(dev);
191     unsigned i;
192
193     for (i = 0; i < 2; ++i) {
194         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
195         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
196     }
197 }
198
199 void vt82c686b_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
200 {
201     PCIDevice *dev;
202
203     dev = pci_create_simple(bus, devfn, "via-ide");
204     pci_ide_create_devs(dev, hd_table);
205 }
206
207 static void via_ide_class_init(ObjectClass *klass, void *data)
208 {
209     DeviceClass *dc = DEVICE_CLASS(klass);
210     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
211
212     k->realize = vt82c686b_ide_realize;
213     k->exit = vt82c686b_ide_exitfn;
214     k->vendor_id = PCI_VENDOR_ID_VIA;
215     k->device_id = PCI_DEVICE_ID_VIA_IDE;
216     k->revision = 0x06;
217     k->class_id = PCI_CLASS_STORAGE_IDE;
218     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
219 }
220
221 static const TypeInfo via_ide_info = {
222     .name          = "via-ide",
223     .parent        = TYPE_PCI_IDE,
224     .class_init    = via_ide_class_init,
225 };
226
227 static void via_ide_register_types(void)
228 {
229     type_register_static(&via_ide_info);
230 }
231
232 type_init(via_ide_register_types)