4 * Copyright (c) 2020 Guenter Roeck <linux@roeck-us.net>
6 * This work is licensed under the terms of the GNU GPL, version 2 or later.
7 * See the COPYING file in the top-level directory.
9 * We need to implement basic reset control in the PHY control register.
10 * For everything else, it is sufficient to set whatever is written.
13 #include "qemu/osdep.h"
14 #include "hw/usb/imx-usb-phy.h"
15 #include "migration/vmstate.h"
17 #include "qemu/module.h"
19 static const VMStateDescription vmstate_imx_usbphy = {
20 .name = TYPE_IMX_USBPHY,
22 .minimum_version_id = 1,
23 .fields = (VMStateField[]) {
24 VMSTATE_UINT32_ARRAY(usbphy, IMXUSBPHYState, USBPHY_MAX),
29 static void imx_usbphy_softreset(IMXUSBPHYState *s)
31 s->usbphy[USBPHY_PWD] = 0x001e1c00;
32 s->usbphy[USBPHY_TX] = 0x10060607;
33 s->usbphy[USBPHY_RX] = 0x00000000;
34 s->usbphy[USBPHY_CTRL] = 0xc0200000;
37 static void imx_usbphy_reset(DeviceState *dev)
39 IMXUSBPHYState *s = IMX_USBPHY(dev);
41 s->usbphy[USBPHY_STATUS] = 0x00000000;
42 s->usbphy[USBPHY_DEBUG] = 0x7f180000;
43 s->usbphy[USBPHY_DEBUG0_STATUS] = 0x00000000;
44 s->usbphy[USBPHY_DEBUG1] = 0x00001000;
45 s->usbphy[USBPHY_VERSION] = 0x04020000;
47 imx_usbphy_softreset(s);
50 static uint64_t imx_usbphy_read(void *opaque, hwaddr offset, unsigned size)
52 IMXUSBPHYState *s = (IMXUSBPHYState *)opaque;
53 uint32_t index = offset >> 2;
61 case USBPHY_DEBUG_SET:
62 case USBPHY_DEBUG1_SET:
64 * All REG_NAME_SET register access are in fact targeting the
67 value = s->usbphy[index - 1];
73 case USBPHY_DEBUG_CLR:
74 case USBPHY_DEBUG1_CLR:
76 * All REG_NAME_CLR register access are in fact targeting the
79 value = s->usbphy[index - 2];
85 case USBPHY_DEBUG_TOG:
86 case USBPHY_DEBUG1_TOG:
88 * All REG_NAME_TOG register access are in fact targeting the
91 value = s->usbphy[index - 3];
94 if (index < USBPHY_MAX) {
95 value = s->usbphy[index];
97 qemu_log_mask(LOG_GUEST_ERROR,
98 "%s: Read from non-existing USB PHY register 0x%"
105 return (uint64_t)value;
108 static void imx_usbphy_write(void *opaque, hwaddr offset, uint64_t value,
111 IMXUSBPHYState *s = (IMXUSBPHYState *)opaque;
112 uint32_t index = offset >> 2;
116 s->usbphy[index] = value;
117 if (value & USBPHY_CTRL_SFTRST) {
118 imx_usbphy_softreset(s);
127 s->usbphy[index] = value;
129 case USBPHY_CTRL_SET:
130 s->usbphy[index - 1] |= value;
131 if (value & USBPHY_CTRL_SFTRST) {
132 imx_usbphy_softreset(s);
138 case USBPHY_DEBUG_SET:
139 case USBPHY_DEBUG1_SET:
141 * All REG_NAME_SET register access are in fact targeting the
142 * REG_NAME register. So we change the value of the REG_NAME
143 * register, setting bits passed in the value.
145 s->usbphy[index - 1] |= value;
150 case USBPHY_CTRL_CLR:
151 case USBPHY_DEBUG_CLR:
152 case USBPHY_DEBUG1_CLR:
154 * All REG_NAME_CLR register access are in fact targeting the
155 * REG_NAME register. So we change the value of the REG_NAME
156 * register, unsetting bits passed in the value.
158 s->usbphy[index - 2] &= ~value;
160 case USBPHY_CTRL_TOG:
161 s->usbphy[index - 3] ^= value;
162 if ((value & USBPHY_CTRL_SFTRST) &&
163 (s->usbphy[index - 3] & USBPHY_CTRL_SFTRST)) {
164 imx_usbphy_softreset(s);
170 case USBPHY_DEBUG_TOG:
171 case USBPHY_DEBUG1_TOG:
173 * All REG_NAME_TOG register access are in fact targeting the
174 * REG_NAME register. So we change the value of the REG_NAME
175 * register, toggling bits passed in the value.
177 s->usbphy[index - 3] ^= value;
180 /* Other registers are read-only or do not exist */
181 qemu_log_mask(LOG_GUEST_ERROR,
182 "%s: Write to %s USB PHY register 0x%"
185 index >= USBPHY_MAX ? "non-existing" : "read-only",
191 static const struct MemoryRegionOps imx_usbphy_ops = {
192 .read = imx_usbphy_read,
193 .write = imx_usbphy_write,
194 .endianness = DEVICE_NATIVE_ENDIAN,
197 * Our device would not work correctly if the guest was doing
198 * unaligned access. This might not be a limitation on the real
199 * device but in practice there is no reason for a guest to access
200 * this device unaligned.
202 .min_access_size = 4,
203 .max_access_size = 4,
208 static void imx_usbphy_realize(DeviceState *dev, Error **errp)
210 IMXUSBPHYState *s = IMX_USBPHY(dev);
212 memory_region_init_io(&s->iomem, OBJECT(s), &imx_usbphy_ops, s,
213 "imx-usbphy", 0x1000);
214 sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
217 static void imx_usbphy_class_init(ObjectClass *klass, void *data)
219 DeviceClass *dc = DEVICE_CLASS(klass);
221 dc->reset = imx_usbphy_reset;
222 dc->vmsd = &vmstate_imx_usbphy;
223 dc->desc = "i.MX USB PHY Module";
224 dc->realize = imx_usbphy_realize;
227 static const TypeInfo imx_usbphy_info = {
228 .name = TYPE_IMX_USBPHY,
229 .parent = TYPE_SYS_BUS_DEVICE,
230 .instance_size = sizeof(IMXUSBPHYState),
231 .class_init = imx_usbphy_class_init,
234 static void imx_usbphy_register_types(void)
236 type_register_static(&imx_usbphy_info);
239 type_init(imx_usbphy_register_types)