net/mac80211/mesh_sync.c

   1 /*
   2  * Copyright 2011-2012, Pavel Zubarev <pavel.zubarev@gmail.com>
   3  * Copyright 2011-2012, Marco Porsch <marco.porsch@s2005.tu-chemnitz.de>
   4  * Copyright 2011-2012, cozybit Inc.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10
  11 #include "ieee80211_i.h"
  12 #include "mesh.h"
  13 #include "driver-ops.h"
  14
  15 /* This is not in the standard.  It represents a tolerable tbtt drift below
  16  * which we do no TSF adjustment.
  17  */
  18 #define TOFFSET_MINIMUM_ADJUSTMENT 10
  19
  20 /* This is not in the standard. It is a margin added to the
  21  * Toffset setpoint to mitigate TSF overcorrection
  22  * introduced by TSF adjustment latency.
  23  */
  24 #define TOFFSET_SET_MARGIN 20
  25
  26 /* This is not in the standard.  It represents the maximum Toffset jump above
  27  * which we'll invalidate the Toffset setpoint and choose a new setpoint.  This
  28  * could be, for instance, in case a neighbor is restarted and its TSF counter
  29  * reset.
  30  */
  31 #define TOFFSET_MAXIMUM_ADJUSTMENT 30000                /* 30 ms */
  32
  33 struct sync_method {
  34         u8 method;
  35         struct ieee80211_mesh_sync_ops ops;
  36 };
  37
  38 /**
  39  * mesh_peer_tbtt_adjusting - check if an mp is currently adjusting its TBTT
  40  *
  41  * @ie: information elements of a management frame from the mesh peer
  42  */
  43 static bool mesh_peer_tbtt_adjusting(struct ieee802_11_elems *ie)
  44 {
  45         return (ie->mesh_config->meshconf_cap &
  46                         IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING) != 0;
  47 }
  48
  49 void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
  50 {
  51         struct ieee80211_local *local = sdata->local;
  52         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  53         /* sdata->vif.bss_conf.beacon_int in 1024us units, 0.04% */
  54         u64 beacon_int_fraction = sdata->vif.bss_conf.beacon_int * 1024 / 2500;
  55         u64 tsf;
  56         u64 tsfdelta;
  57
  58         spin_lock_bh(&ifmsh->sync_offset_lock);
  59         if (ifmsh->sync_offset_clockdrift_max < beacon_int_fraction) {
  60                 msync_dbg(sdata, "TBTT : max clockdrift=%lld; adjusting\n",
  61                           (long long) ifmsh->sync_offset_clockdrift_max);
  62                 tsfdelta = -ifmsh->sync_offset_clockdrift_max;
  63                 ifmsh->sync_offset_clockdrift_max = 0;
  64         } else {
  65                 msync_dbg(sdata, "TBTT : max clockdrift=%lld; adjusting by %llu\n",
  66                           (long long) ifmsh->sync_offset_clockdrift_max,
  67                           (unsigned long long) beacon_int_fraction);
  68                 tsfdelta = -beacon_int_fraction;
  69                 ifmsh->sync_offset_clockdrift_max -= beacon_int_fraction;
  70         }
  71         spin_unlock_bh(&ifmsh->sync_offset_lock);
  72
  73         tsf = drv_get_tsf(local, sdata);
  74         if (tsf != -1ULL)
  75                 drv_set_tsf(local, sdata, tsf + tsfdelta);
  76 }
  77
  78 static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
  79                                    u16 stype,
  80                                    struct ieee80211_mgmt *mgmt,
  81                                    struct ieee802_11_elems *elems,
  82                                    struct ieee80211_rx_status *rx_status)
  83 {
  84         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  85         struct ieee80211_local *local = sdata->local;
  86         struct sta_info *sta;
  87         u64 t_t, t_r;
  88
  89         WARN_ON(ifmsh->mesh_sp_id != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET);
  90
  91         /* standard mentions only beacons */
  92         if (stype != IEEE80211_STYPE_BEACON)
  93                 return;
  94
  95         /*
  96          * Get time when timestamp field was received.  If we don't
  97          * have rx timestamps, then use current tsf as an approximation.
  98          * drv_get_tsf() must be called before entering the rcu-read
  99          * section.
 100          */
 101         if (ieee80211_have_rx_timestamp(rx_status))
 102                 t_r = ieee80211_calculate_rx_timestamp(local, rx_status,
 103                                                        24 + 12 +
 104                                                        elems->total_len +
 105                                                        FCS_LEN,
 106                                                        24);
 107         else
 108                 t_r = drv_get_tsf(local, sdata);
 109
 110         rcu_read_lock();
 111         sta = sta_info_get(sdata, mgmt->sa);
 112         if (!sta)
 113                 goto no_sync;
 114
 115         /* check offset sync conditions (13.13.2.2.1)
 116          *
 117          * TODO also sync to
 118          * dot11MeshNbrOffsetMaxNeighbor non-peer non-MBSS neighbors
 119          */
 120
 121         if (elems->mesh_config && mesh_peer_tbtt_adjusting(elems)) {
 122                 msync_dbg(sdata, "STA %pM : is adjusting TBTT\n",
 123                           sta->sta.addr);
 124                 goto no_sync;
 125         }
 126
 127         /* Timing offset calculation (see 13.13.2.2.2) */
 128         t_t = le64_to_cpu(mgmt->u.beacon.timestamp);
 129         sta->mesh->t_offset = t_t - t_r;
 130
 131         if (test_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN)) {
 132                 s64 t_clockdrift = sta->mesh->t_offset_setpoint - sta->mesh->t_offset;
 133                 msync_dbg(sdata,
 134                           "STA %pM : t_offset=%lld, t_offset_setpoint=%lld, t_clockdrift=%lld\n",
 135                           sta->sta.addr, (long long) sta->mesh->t_offset,
 136                           (long long) sta->mesh->t_offset_setpoint,
 137                           (long long) t_clockdrift);
 138
 139                 if (t_clockdrift > TOFFSET_MAXIMUM_ADJUSTMENT ||
 140                     t_clockdrift < -TOFFSET_MAXIMUM_ADJUSTMENT) {
 141                         msync_dbg(sdata,
 142                                   "STA %pM : t_clockdrift=%lld too large, setpoint reset\n",
 143                                   sta->sta.addr,
 144                                   (long long) t_clockdrift);
 145                         clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
 146                         goto no_sync;
 147                 }
 148
 149                 spin_lock_bh(&ifmsh->sync_offset_lock);
 150                 if (t_clockdrift > ifmsh->sync_offset_clockdrift_max)
 151                         ifmsh->sync_offset_clockdrift_max = t_clockdrift;
 152                 spin_unlock_bh(&ifmsh->sync_offset_lock);
 153         } else {
 154                 sta->mesh->t_offset_setpoint = sta->mesh->t_offset - TOFFSET_SET_MARGIN;
 155                 set_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
 156                 msync_dbg(sdata,
 157                           "STA %pM : offset was invalid, t_offset=%lld\n",
 158                           sta->sta.addr,
 159                           (long long) sta->mesh->t_offset);
 160         }
 161
 162 no_sync:
 163         rcu_read_unlock();
 164 }
 165
 166 static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata,
 167                                          struct beacon_data *beacon)
 168 {
 169         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 170
 171         WARN_ON(ifmsh->mesh_sp_id != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET);
 172         WARN_ON(!rcu_read_lock_held());
 173
 174         spin_lock_bh(&ifmsh->sync_offset_lock);
 175
 176         if (ifmsh->sync_offset_clockdrift_max > TOFFSET_MINIMUM_ADJUSTMENT) {
 177                 /* Since ajusting the tsf here would
 178                  * require a possibly blocking call
 179                  * to the driver tsf setter, we punt
 180                  * the tsf adjustment to the mesh tasklet
 181                  */
 182                 msync_dbg(sdata,
 183                           "TBTT : kicking off TBTT adjustment with clockdrift_max=%lld\n",
 184                           ifmsh->sync_offset_clockdrift_max);
 185                 set_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags);
 186         } else {
 187                 msync_dbg(sdata,
 188                           "TBTT : max clockdrift=%lld; too small to adjust\n",
 189                           (long long)ifmsh->sync_offset_clockdrift_max);
 190                 ifmsh->sync_offset_clockdrift_max = 0;
 191         }
 192         spin_unlock_bh(&ifmsh->sync_offset_lock);
 193 }
 194
 195 static const struct sync_method sync_methods[] = {
 196         {
 197                 .method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
 198                 .ops = {
 199                         .rx_bcn_presp = &mesh_sync_offset_rx_bcn_presp,
 200                         .adjust_tbtt = &mesh_sync_offset_adjust_tbtt,
 201                 }
 202         },
 203 };
 204
 205 const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method)
 206 {
 207         int i;
 208
 209         for (i = 0 ; i < ARRAY_SIZE(sync_methods); ++i) {
 210                 if (sync_methods[i].method == method)
 211                         return &sync_methods[i].ops;
 212         }
 213         return NULL;
 214 }