1 2009-10-06 Nick Clifton <nickc@redhat.com>
3 * po/fi.po: Updated Finnish translation.
5 2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
7 * opc2c.c: Include "libiberty.h" and <errno.h>.
8 (orig_filename): Constify.
9 (dump_lines): Fix line number directive.
10 (main): Set orig_filename to basename of input file. Use
13 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
14 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
16 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
17 $(LINK_FOR_BUILD). Link with libiberty.
18 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
19 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
20 * Makefile.in: Regenerated.
21 * rx-decode.c: Regenerated.
23 2009-10-03 Paul Reed <paulreed@paddedcell.com>
25 * arm-dis.c (print_insn): Check symtab_size not *symtab.
27 2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
29 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
30 * i386-tbl.h: Regenerated.
32 2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
34 * ppc-dis.c (ppc_opts): Add "476" entry.
35 * ppc-opc.c (PPC476): Define.
36 (powerpc_opcodes): Update mnemonics where required for 476.
38 2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
40 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
41 * ppc-dis.c (ppc_opts): Likewise.
42 Rename "ppca2" to "a2".
44 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
46 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
48 2009-09-29 DJ Delorie <dj@redhat.com>
50 * Makefile.am: Add RX files.
51 * configure.in: Add support for RX target.
52 * disassemble.c: Likewise.
53 * Makefile.in: Regenerate.
54 * configure: Regenerate.
56 * rx-decode.c: New file.
57 * rx-decode.opc: New file.
60 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
62 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
63 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
65 2009-09-25 Michael Eager <eager@eagercon.com>
67 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
68 microblaze_decode_insn): Add declarations.
69 (get_delay_slots_microblaze): Remove.
71 2009-09-25 Martin Thuresson <martint@google.com>
73 Update sources to make arc and arm targets compile cleanly with
75 * arc-dis.c Fix casts.
76 * arc-ext.c: Add casts.
77 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
80 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
82 * i386-gen.c (opcode_modifiers): Remove Vex256.
83 (set_bitfield): Handle XXX=V.
85 * i386-opc.h (Vex): Update comments.
88 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
90 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
91 * i386-tbl.h: Regenerated.
93 2009-09-23 Nick Clifton <nickc@redhat.com>
95 * po/fr.po: Updated French translation.
97 2009-09-21 Ben Elliston <bje@au.ibm.com>
98 Peter Bergner <bergner@vnet.ibm.com>
100 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
101 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
102 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
103 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
105 (ERAT_T): New operand.
106 (XWC_MASK): New mask.
110 2009-09-18 Nick Clifton <nickc@redhat.com>
112 * po/es.po: Updated Spanish translation.
113 * po/vi.po: Updated Vietnamese translation.
115 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
117 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
120 2009-09-14 Nick Clifton <nickc@redhat.com>
122 * po/nl.po: Updated Dutch translation.
124 2009-09-11 Nick Clifton <nickc@redhat.com>
126 * po/opcodes.pot: Updated by the Translation project.
128 2009-09-11 Martin Thuresson <martint@google.com>
130 Updated sources to compile cleanly with -Wc++-compat:
131 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
132 * ldcref.c: Add casts.
133 * ldctor.c: Add casts.
135 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
136 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
137 * ldlang.h (enum statement_enum): Move to top level.
138 * ldmain.c: Add casts.
139 * ldwrite.c: Add casts.
140 * lexsup.c: Add casts. (enum control_enum): Move to top level.
141 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
143 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
145 * s390-dis.c (print_insn_s390): Avoid 'long long'.
147 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
149 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
150 (print_insn_s390): Signextend and shift pcrel operands before printing.
152 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
154 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
155 VEX_LEN_AE_R_X_M_0 in comments.
157 2009-09-08 DJ Delorie <dj@redhat.com>
159 * mep-opc.c: Regenerate.
161 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
163 * z8kgen.c (struct op): Replace unused flavor with id.
164 (opt): Remove extra xorb entry.
165 (func): Use id field as fallback.
166 (sub): Return new string, caller changed.
167 (internal): Allocate end marker. Assign unique id before sorting.
168 (gas): Likewise. Fix loop end condition.
169 * z8k-opc.h: Regenerate.
171 2009-09-08 Alan Modra <amodra@bigpond.net.au>
173 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
175 2009-09-07 Alan Modra <amodra@bigpond.net.au>
177 * z8kgen.c (func): Fix thinko last patch.
179 2009-09-07 Alan Modra <amodra@bigpond.net.au>
181 * z8kgen.c (func): Stabilize qsort of identically named entries.
182 * z8k-opc.h: Regenerate.
184 2009-09-07 Tristan Gingold <gingold@adacore.com>
186 * po/opcodes.pot: Regenerate.
188 2009-09-07 Alan Modra <amodra@bigpond.net.au>
190 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
191 * configure: Regenerate.
192 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
193 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
194 (i386-gen, ia64-gen, z8kgen): ..here.
195 * Makefile.in: Regenerate.
197 2009-09-07 Tristan Gingold <gingold@adacore.com>
199 * z8k-opc.h: Regenerate.
201 2009-09-05 Martin Thuresson <martin@mtme.org>
203 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
204 * m88k-dis.c (m88kdis): Rename variable class to in_class.
205 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
206 Rename argument class to symbol_class.
208 2009-09-04 Jie Zhang <jie.zhang@analog.com>
210 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
211 to the new encoding of DBGA, DBGAH, and DBGAL.
212 (_print_insn_bfin): Likewise.
214 2009-09-03 Jie Zhang <jie.zhang@analog.com>
216 * bfin-dis.c (_print_insn_bfin): Don't declare.
217 (print_insn_bfin): Don't declare.
218 (dregs_pair): Remove.
219 (ignore_bits): Remove.
222 2009-09-03 Jie Zhang <jie.zhang@analog.com>
224 * bfin-dis.c (IS_DREG): Define.
230 (decode_REGMV_0): Check illegal register move instructions.
232 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
234 * Makefile.am (BUILD_LIBINTL): New variable.
235 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
236 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
237 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
238 * Makefile.in: Regenerate.
240 2009-09-01 DJ Delorie <dj@redhat.com>
242 * mep-asm.c: Regenerate.
243 * mep-desc.c: Regenerate.
244 * mep-opc.c: Regenerate.
246 2009-09-01 Tristan Gingold <gingold@adacore.com>
248 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
249 dependencies. Remove unused FORMAT variable.
250 * configure.com: New file to create build.com DCL script for
251 Itanium VMS or Alpha VMS.
253 2009-08-29 Martin Thuresson <martin@mtme.org>
255 * cris-dis.c (bytes_to_skip): Update code to use new name.
256 * i386-dis.c (putop): Update code to use new name.
257 * i386-gen.c (process_i386_opcodes): Update code to use
259 * i386-opc.h (struct template): Rename struct template to
260 insn_template. Update code accordingly.
261 * i386-tbl.h (i386_optab): Update type to use new name.
262 * ia64-dis.c (print_insn_ia64): Rename variable template
264 * tic30-dis.c (struct instruction, get_tic30_instruction):
265 Update code to use new name.
266 * tic54x-dis.c (has_lkaddr, get_insn_size)
267 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
268 Update code to use new name.
269 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
270 Update type to new name.
271 * z8kgen.c (internal, gas): Rename variable new to new_op.
273 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
275 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
276 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
277 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
278 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
279 * Makefile.in: Regenerated.
281 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
283 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
284 [INSTALL_LIBBFD]: ... here, ...
285 [INSTALL_LIBBFD]: ... and empty overrides here.
286 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
287 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
288 * Makefile.in: Regenerate.
289 * configure: Regenerate.
291 2009-08-26 Philippe De Muyter <phdm@macqel.be>
293 * m68k-dis.c (print_insn_arg): Add movecr register names for
294 coldfire v4e families.
296 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
298 * Makefile.am (SUBDIRS): Build '.' before 'po'.
299 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
300 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
301 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
302 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
303 (i386-gen.o): New rule.
304 ($(srcdir)/i386-init.h): Adjust.
305 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
306 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
307 (ia64-gen.o): New rule.
308 (ia64_asmtab_deps): New variable.
309 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
310 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
311 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
313 (s390-opc.tab): Adjust.
314 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
316 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
317 * Makefile.in: Regenerate.
318 * z8kgen.c (gas): Avoid '/*' in comment.
319 * z8k-opc.h (func): Regenerate.
321 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
323 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
324 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
325 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
326 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
328 (LIBOPCODES_CFILES): New variable, adding to
329 TARGET_LIBOPCODES_CFILES also non-target library sources.
330 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
332 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
333 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
334 * Makefile.in: Regenerate.
335 * po/POTFILES.in: Regenerate.
337 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
339 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
340 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
341 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
342 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
343 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
344 is built shared even if it is not to be installed.
345 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
346 (install_libopcodes, uninstall_libopcodes): Remove.
347 (AM_CPPFLAGS): Renamed from ...
348 (INCLUDES): ... this.
349 * Makefile.in: Regenerate.
351 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
352 1.11, foreign, no-dist.
353 (MKDEP, m32c_opc_h): Remove variables.
354 (disassemble.lo): Rewrite using automake-style dependency
355 tracking rules; only list the dependency upon the primary source
356 file, but no included headers.
357 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
358 (i386-gen.o, ia64-gen.o): Remove dependency statements.
359 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
360 ensure all dependency fragments are included in the Makefile.
361 (s390-opc.lo): Depend on s390-opc.tab.
362 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
363 (mkdep section): Remove.
364 * Makefile.in: Regenerate.
365 * po/POTFILES.in: Regenerate.
367 * Makefile.am (install-pdf, install-html): Remove.
368 * Makefile.in: Regenerate.
370 * Makefile.in: Regenerate.
371 * aclocal.m4: Likewise.
372 * config.in: Likewise.
373 * configure: Likewise.
375 2009-08-06 Michael Eager <eager@eagercon.com>
377 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
378 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
379 * Makefile.in: Regenerate.
380 * configure.in: Add bfd_microblaze_arch target.
381 * configure: Regenerate.
382 * disassemble.c: Define ARCH_microblaze, return
383 print_insn_microblaze().
384 * microblaze-dis.c: New MicroBlaze disassembler.
385 * microblaze-opc.h: New MicroBlaze opcode definitions.
386 * microblaze-opcm.h: New MicroBlaze opcode types.
388 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
390 * configure.in: Handle bfd_l1om_arch.
391 * disassemble.c (disassembler): Likewise.
393 * configure: Regenerated.
395 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
396 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
398 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
400 (cpu_flags): Add CpuL1OM.
401 (set_bitfield): Take an argument to set the value field.
402 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
403 (process_i386_opcode_modifier): Updated.
404 (process_i386_operand_type): Likewise.
405 * i386-init.h: Regenerated.
406 * i386-tbl.h: Likewise.
408 * i386-opc.h (CpuL1OM): New.
410 (i386_cpu_flags): Add cpul1om.
412 2009-07-24 Jan Beulich <jbeulich@novell.com>
414 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
416 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
417 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
418 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
419 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
421 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
423 * i386-opc.tbl: Qualify floating point instructions by their
424 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
425 and fsincos to be avilable only on 387. Fix fstsw ax to be
426 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
428 * i386-init.h, i386-tbl.h: Regenerate.
430 2009-07-20 Nick Clifton <nickc@redhat.com>
433 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
434 offset or indexed based addressing mode 3.
436 2009-07-14 Nick Clifton <nickc@redhat.com>
439 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
441 (arm_decode_shift): Catch illegal register based shifts.
442 (print_insn_arm): Properly handle negative register r0
443 post-indexed addressing.
445 2009-07-10 Doug Kwan <dougkwan@google.com>
447 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
448 lower 32 bits of long types to make hexadecimal output consistent
449 on both 32-bit and 64-bit hosts.
451 2009-07-10 Alan Modra <amodra@bigpond.net.au>
453 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
454 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
455 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
456 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
457 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
458 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
459 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
460 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
461 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
462 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
463 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
464 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
466 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
468 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
470 2009-07-07 Nick Clifton <nickc@redhat.com>
473 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
476 2009-07-06 DJ Delorie <dj@redhat.com>
478 * mep-desc.c: Regenerate.
479 * mep-desc.h: Regenerate.
480 * mep-opc.c: Regenerate.
481 * mep-opc.h: Regenerate.
483 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
485 * i386-opc.h (CpuFMA4): Add CpuFMA4.
486 (i386_cpu_flags): New.
487 * i386-gen.c: Add CPU_FMA4_FLAGS.
488 * i386-opc.tbl: Add FMA4 instructions.
489 * i386-tbl.h: Regenerate.
490 * i386-init.h: Regenerate.
491 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
492 (OP_XMM_VexW): Ditto.
494 (VEXI4_Fixup): Ditto.
495 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
496 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
497 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
498 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
499 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
500 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
501 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
502 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
503 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
504 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
505 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
506 (get_vex_imm8): New. handle FMA4.
507 (OP_EX_VexReg): Ditto.
509 2009-06-30 Nick Clifton <nickc@redhat.com>
512 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
513 LFM and SFM instructions as comments,.
514 Improve consistency of formatting for instructions displayed as
515 comments and decimal values displayed with their hexadecimal
519 2009-06-29 Nick Clifton <nickc@redhat.com>
522 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
523 boundary between variaant and generic coprocessor instuctions.
524 (coprocessor): Use it.
525 Fix architecture version of MCRR and MRRC instructions.
526 (arm_opcdes): Fix patterns for STRB and STRH instructions.
527 (print_insn_coprocessor): Check architecture and extension masks.
528 Print a hexadecimal version of any decimal constant that is
529 outside of the range of -16 to +32.
530 (print_arm_address): Add a return value of the offset used in the
531 adress, if it is worth printing a hexadecimal version of it.
532 (print_insn_neon): Print a hexadecimal version of any decimal
533 constant that is outside of the range of -16 to +32.
534 (print_insn_arm): Likewise.
535 (print_insn_thumb16): Likewise.
536 (print_insn_thumb32): Likewise.
539 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
540 of an undefined instruction.
541 (arm_opcodes): Use it.
542 (thumb_opcod): Use it.
543 (thumb32_opc): Use it.
545 2009-06-23 DJ Delorie <dj@redhat.com>
547 * mep-desc.c: Regenerate.
548 * mep-desc.h: Regenerate.
549 * mep-dis.c: Regenerate.
550 * mep-ibld.c: Regenerate.
551 * mep-opc.c: Regenerate.
553 * mep-asm.c: Regenerate.
554 * mep-opc.c: Regenerate.
555 * mep-opc.h: Regenerate.
557 2009-06-22 Nick Clifton <nickc@redhat.com>
559 * po/fi.po: Updated Finish translation.
561 2009-06-22 Alan Modra <amodra@bigpond.net.au>
563 * m32c-asm.c: Regenerate.
565 2009-06-22 Alan Modra <amodra@bigpond.net.au>
567 * score-dis.c (print_insn_score48, print_insn_score32): Move default
568 case label to proper lexical block.
569 * score7-dis.c (print_insn_score32): Likewise.
571 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
573 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
574 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
575 * s390-opc.txt (nopr, nop): Use new instruction format.
577 2009-06-18 Nick Clifton <nickc@redhat.com>
580 * arm-dis.c (print_insn_coprocessor): Check that a user specified
581 ARM architecture supports the matched instruction.
582 (print_insn_arm): Likewise.
583 (select_arm_features): New function. Fills in the fields of an
584 arm_feature_set structure based on a given arm machine number.
585 (print_insn): Initialise an arm_feature_set structure.
587 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
589 * vax-dis.c (is_function_entry): Return success for synthetic
591 (is_plt_tail): New function.
592 (print_insn_vax): Decode PLT entry offset longword.
594 2009-06-15 Nick Clifton <nickc@redhat.com>
597 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
601 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
603 2009-06-15 Nick Clifton <nickc@redhat.com>
606 * arm-dis.c (print_insn): Ignore is_data if the user has requested
607 the disassembly of data as well as instructions.
609 2009-06-11 Doug Evans <dje@sebabeach.org>
611 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
613 2009-06-11 Anthony Green <green@moxielogic.com>
615 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
616 (moxie_form3_opc_info): Add branch instructions.
617 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
618 encoded instructions.
620 2009-06-06 Anthony Green <green@moxielogic.com>
622 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
623 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
625 2009-06-04 Alan Modra <amodra@bigpond.net.au>
627 * dep-in.sed: Don't use \n in replacement part of s command.
628 * Makefile.am (DEP1): LC_ALL for uniq.
629 * Makefile.in: Regenerate.
631 2009-06-02 Nick Clifton <nickc@redhat.com>
633 * po/nl.po: Updated Dutch translation.
635 2009-06-02 Tristan Gingold <gingold@adacore.com>
637 * ia64-gen.c (parse_resource_users, print_dependency_table,
638 add_dis_table_ent, finish_distable, insert_bit_table_ent,
639 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
640 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
641 insert_completer_entry, print_completer_entry, print_completer_table,
642 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
644 2009-05-28 DJ Delorie <dj@redhat.com>
646 * mep-asm.c: Regenerate.
647 * mep-desc.c: Regenerate.
649 2009-05-26 DJ Delorie <dj@redhat.com>
651 * mep-asm.c: Regenerate.
652 * mep-desc.c: Regenerate.
653 * mep-desc.h: Regenerate.
654 * mep-dis.c: Regenerate.
655 * mep-ibld.c: Regenerate.
656 * mep-opc.c: Regenerate.
657 * mep-opc.h: Regenerate.
659 2009-05-26 Nick Clifton <nickc@redhat.com>
661 * po/id.po: Updated Indonesian translation.
662 * po/opcodes.pot: Updated template file.
664 2009-05-26 Alan Modra <amodra@bigpond.net.au>
666 * dep-in.sed: Don't modify .o to .lo here. Output one filename
667 per line with all lines having continuation backslash. Prefix
668 first line with "A", following lines with "B".
669 * Makefile.am (DEP): Don't use dep.sed here.
670 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
671 dep.sed here on dependencies, sort and uniq.
672 * Makefile.in: Regenerate.
674 2009-05-25 Tristan Gingold <gingold@adacore.com>
676 * makefile.vms (OPT): New variable.
677 (CFLAGS): Update compilation flags.
679 2009-05-22 DJ Delorie <dj@redhat.com>
681 * mep-asm.c: Regenerate.
682 * mep-desc.c: Regenerate.
683 * mep-desc.h: Regenerate.
684 * mep-dis.c: Regenerate.
685 * mep-ibld.c: Regenerate.
686 * mep-opc.c: Regenerate.
687 * mep-opc.h: Regenerate.
689 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
691 * i386-opc.h (Cpusse5): Delete.
692 (i386_cpu_flags): Delete.
693 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
694 * i386-opc.tbl: Remove SSE5 instructions.
695 * i386-tbl.h: Regenerate.
696 * i386-init.h: Regenerate.
697 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
698 (print_drex_arg): Delete.
701 (OP_DREX_ICMP): Delete.
702 (OP_DREX_FCMP): Delete.
704 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
706 2009-05-22 Alan Modra <amodra@bigpond.net.au>
708 * Makefile.am: Run "make dep-am".
709 * Makefile.in: Regenerate.
710 * po/POTFILES.in: Regenerate.
712 2009-05-19 DJ Delorie <dj@redhat.com>
714 * mep-asm.c: Regenerate.
715 * mep-opc.c: Regenerate.
717 2009-04-30 DJ Delorie <dj@redhat.com>
719 * mep-asm.c: Regenerate.
720 * mep-desc.c: Regenerate.
721 * mep-desc.h: Regenerate.
722 * mep-dis.c: Regenerate.
723 * mep-ibld.c: Regenerate.
724 * mep-opc.c: Regenerate.
725 * mep-opc.h: Regenerate.
727 2009-04-17 DJ Delorie <dj@redhat.com
729 * mep-desc.c: Regenerate.
730 * mep-ibld.c: Regenerate.
731 * mep-opc.c: Regenerate.
732 * mep-opc.h: Regenerate.
734 2009-04-15 Anthony Green <green@moxielogic.com>
736 * moxie-opc.c, moxie-dis.c: Created.
737 * Makefile.am: Build the moxie source files.
738 * configure.in: Add moxie support.
739 * Makefile.in, configure: Rebuilt.
740 * disassemble.c (disassembler): Add moxie support.
741 (ARCH_moxie): Define.
743 2009-04-15 Jan Beulich <jbeulich@novell.com>
745 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
747 (pshab, pshaw, pshad, pshaq): Likewise.
748 * i386-tbl.h: Re-generate.
750 2009-04-08 DJ Delorie <dj@redhat.com
752 * mep-asm.c: Regenerate.
753 * mep-desc.c: Regenerate.
754 * mep-desc.h: Regenerate.
755 * mep-dis.c: Regenerate.
756 * mep-ibld.c: Regenerate.
757 * mep-opc.c: Regenerate.
758 * mep-opc.h: Regenerate.
760 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
762 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
763 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
764 Reorder entries so the extended mnemonics are listed before tlbilx.
766 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
768 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
770 (print_insn_powerpc): Make sure we only deprecate instructions using
771 the original dialect and not a modified dialect due to -Many handling.
772 Move the handling of the condition register and default operands to
773 the end of the if/else if/else chain.
774 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
775 instructions from newer processors are listed before older ones.
776 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
777 that have instructions with conflicting opcodes.
779 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
781 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
784 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
786 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
788 2009-03-30 Joseph Myers <joseph@codesourcery.com>
790 * arm-dis.c (print_insn): Also check section matches in backwards
791 search for mapping symbol.
793 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
795 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
797 2009-03-18 Alan Modra <amodra@bigpond.net.au>
799 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
800 * Makefile.am: Run "make dep-am".
801 * Makefile.in: Regenerate.
802 * openrisc-opc.c: Regenerate.
804 2009-03-10 Nick Clifton <nickc@redhat.com>
806 * po/id.po: Updated Indonesian translation.
808 2009-03-10 Alan Modra <amodra@bigpond.net.au>
810 * ppc-dis.c: Include "opintl.h".
811 (struct ppc_mopt, ppc_opts): New.
812 (ppc_parse_cpu): New function.
813 (powerpc_init_dialect): Use it.
814 (print_ppc_disassembler_options): Dump options from ppc_opts.
815 Internationalize message.
817 2009-03-06 Nick Clifton <nickc@redhat.com>
819 * po/es.po: Updated Spanish translation.
821 2009-03-04 Alan Modra <amodra@bigpond.net.au>
824 * configure.in: Test for ld --as-needed support. Link shared
825 libopcodes against libm.
826 * configure: Regenerate.
828 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
830 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
831 instructions from newer processors are listed before older ones.
833 2009-03-03 Alan Modra <amodra@bigpond.net.au>
835 * Makefile.am: Run "make dep-am".
836 (HFILES): Move lm32-desc.h and lm32-opc.h from..
838 * Makefile.in: Regenerate.
840 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
842 * score7-dis.c: New file.
843 * Makefile.am: Add dependencies for score7-dis.c.
844 * Makefile.in: Regenerate.
845 * configure.in: Add score7-dis to score files.
846 * configure: Regenerate.
847 * score-dis.c: Add support for score7 architecture.
848 * score-opc.h: Likewise.
850 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
852 * configure: Regenerate.
854 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
856 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
858 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
860 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
861 the power7 and the isel instructions.
862 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
863 (insert_dm, extract_dm): Likewise.
864 (XB6): Update comment to include XX2 form.
865 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
866 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
867 (RemoveXX3DM): Delete.
868 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
869 "mftgpr">: Deprecate for POWER7.
870 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
871 "frsqrte.">: Deprecate the three operand form and enable the two
872 operand form for POWER7 and later.
873 <"wait">: Extend to accept optional parameter. Enable for POWER7.
874 <"waitsrv", "waitimpl">: Add extended opcodes.
875 <"ldbrx", "stdbrx">: Enable for POWER7.
876 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
877 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
878 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
879 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
880 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
881 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
882 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
883 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
884 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
885 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
886 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
887 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
888 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
889 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
890 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
891 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
892 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
893 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
894 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
895 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
896 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
897 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
898 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
899 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
900 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
901 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
902 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
903 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
904 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
905 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
906 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
907 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
908 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
909 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
910 "xxspltw", "xxswapd">: Add VSX opcodes.
912 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
914 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
915 (operand_types): Remove Vex_Imm4.
917 * i386-opc.h (Vex_Imm4): Removed.
919 (i386_operand_type): Remove vex_imm4.
921 * i386-opc.tbl: Remove Vex_Imm4 comments.
922 * i386-init.h: Regenerated.
923 * i386-tbl.h: Likewise.
925 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
927 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
928 vq{r}shr{u}n.s64 insnstructions.
930 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
932 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
933 operand to be a float point register (FRT/FRS).
935 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
937 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
938 dmfc2 and dmtc2 before the architecture-level variants.
940 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
942 * fr30-opc.c: Regenerate.
943 * frv-opc.c: Regenerate.
944 * ip2k-opc.c: Regenerate.
945 * iq2000-opc.c: Regenerate.
946 * lm32-opc.c: Regenerate.
947 * m32c-opc.c: Regenerate.
948 * m32r-opc.c: Regenerate.
949 * mep-opc.c: Regenerate.
950 * mt-opc.c: Regenerate.
951 * xc16x-opc.c: Regenerate.
952 * xstormy16-opc.c: Regenerate.
953 * tic54x-dis.c (print_instruction): Avoid compiler warning on
956 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
958 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
960 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
962 * ppc-opc.c: Update copyright year.
963 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
964 ordering for POWER4 and later and use the correct Server ordering.
966 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
968 AVX Programming Reference (January, 2009)
969 * i386-dis.c (PREFIX_VEX_3A44): New.
970 (VEX_LEN_3A44_P_2): Likewise.
971 (PREFIX_VEX_3A48): Updated.
972 (VEX_LEN_3A4C_P_2): Likewise.
973 (prefix_table): Add PREFIX_VEX_3A44.
974 (vex_table): Likewise.
975 (vex_len_table): Add VEX_LEN_3A44_P_2.
977 * i386-opc.tbl: Add PCLMUL + AVX instructions.
978 * i386-tbl.h: Regenerated.
980 2009-02-03 Sandip Matte <sandip@rmicorp.com>
982 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
983 (mips_arch_choices): Add XLR entry.
984 * mips-opc.c (XLR): Define.
985 (mips_builtin_opcodes): Add XLR instructions.
987 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
989 * Makefile.am: Add install-pdf target.
990 * po/Make-in: Add install-pdf target.
991 * Makefile.in: Regenerate.
993 2009-02-02 DJ Delorie <dj@redhat.com>
995 * mep-asm.c: Regenerate.
996 * mep-desc.c: Regenerate.
997 * mep-desc.h: Regenerate.
998 * mep-dis.c: Regenerate.
999 * mep-ibld.c: Regenerate.
1000 * mep-opc.c: Regenerate.
1001 * mep-opc.h: Regenerate.
1003 2009-01-29 Mark Mitchell <mark@codesourcery.com>
1005 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1008 2009-01-28 Chao-ying Fu <fu@mips.com>
1010 * mips-opc.c (suxc1): Add the flag of FP_D.
1012 2009-01-20 Alan Modra <amodra@bigpond.net.au>
1014 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1015 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1016 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1017 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1018 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1019 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1020 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1021 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1023 2009-01-16 Alan Modra <amodra@bigpond.net.au>
1025 * configure.in (commonbfdlib): Delete.
1026 (SHARED_LIBADD): Add pic libiberty if such is available.
1027 * configure: Regenerate.
1028 * po/POTFILES.in: Regenerate.
1030 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1032 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1033 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1034 operand form and enable the four operand form for POWER6 and later.
1035 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1036 three operand form for POWER6 and later.
1038 2009-01-14 Mike Frysinger <vapier@gentoo.org>
1040 * bfin-dis.c (OUTS): Use "%s" as format string.
1042 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1044 * i386-gen.c (cpu_flag_init): Remove a white space.
1045 (operand_type_init): Likewise.
1047 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1049 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1050 * i386-tbl.h: Regenerated.
1052 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1054 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1055 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1056 subS, xorS and cmpS.
1058 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1060 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1061 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1062 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1063 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1066 (set_bitfield): Take an argument, lineno. Don't report lineno
1067 on error if it is -1.
1068 (process_i386_cpu_flag): Take an argument, lineno.
1069 (process_i386_opcode_modifier): Likewise.
1070 (process_i386_operand_type): Likewise.
1071 (output_i386_opcode): Likewise.
1072 (opcode_hash_entry): Add lineno.
1073 (process_i386_opcodes): Updated.
1074 (process_i386_registers): Likewise.
1075 (process_i386_initializers): Likewise.
1077 * i386-opc.h (CpuP4): Removed.
1081 (CpuSYSCALL): Likewise.
1083 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1084 cpuclflush and cpusyscall.
1086 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1088 * i386-init.h: Regenerated.
1089 * i386-tbl.h: Likewise.
1091 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1093 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1094 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1095 (cpu_flags): Add CpuRdtscp.
1096 (set_bitfield): Remove CpuSledgehammer check.
1098 * i386-opc.h (CpuRdtscp): New.
1100 (i386_cpu_flags): Add cpurdtscp.
1102 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1103 * i386-init.h: Regenerated.
1104 * i386-tbl.h: Likewise.
1106 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1108 * ppc-opc.c (PPCNONE): Define.
1110 (powerpc_opcodes): Initialize the new "deprecated" field.
1112 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1114 AVX Programming Reference (December, 2008)
1115 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1116 (VEX_LEN_E7_P_2_M_0): Likewise.
1117 (VEX_LEN_2C_P_1): Updated.
1118 (VEX_LEN_E8_P_2): Likewise.
1119 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1120 (mod_table): Likewise.
1122 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1123 * i386-tbl.h: Regenerated.
1125 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1127 * i386-gen.c (process_copyright): Update for 2009.
1129 * i386-init.h: Regenerated.
1130 * i386-tbl.h: Likewise.
1132 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1134 AVX Programming Reference (December, 2008)
1135 * i386-dis.c (OP_VEX_FMA): Removed.
1136 (OP_EX_VexW): Likewise.
1137 (OP_EX_VexImmW): Likewise.
1138 (OP_XMM_VexW): Likewise.
1139 (VEXI4_Fixup): Likewise.
1140 (VPERMIL2_Fixup): Likewise.
1143 (Vex128FMA): Likewise.
1145 (EXdVexW): Likewise.
1146 (EXqVexW): Likewise.
1147 (EXVexImmW): Likewise.
1149 (VPERMIL2): Likewise.
1150 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1151 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1152 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1153 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1154 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1155 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1156 (get_vex_imm8): Likewise.
1157 (OP_EX_VexReg): Likewise.
1158 vpermil2_op): Likewise.
1160 (vex_w_dq_mode): Likewise.
1161 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1162 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1163 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1165 (PREFIX_VEX_38DB): Likewise.
1166 (PREFIX_VEX_3A4A): Likewise.
1167 (PREFIX_VEX_3A60): Likewise.
1168 (PREFIX_VEX_3ADF): Likewise.
1169 (VEX_LEN_3ADF_P_2): Likewise.
1170 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1171 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1172 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1173 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1174 PREFIX_VEX_3896...PREFIX_VEX_389F,
1175 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1176 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1177 (vex_table): Likewise.
1178 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1179 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1180 (putop): Support "%XW".
1181 (intel_operand_size): Handle vex_w_dq_mode.
1183 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1185 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1186 instructions. Add new FMA instructions.
1187 * i386-tbl.h: Regenerated.
1189 2009-01-02 Matthias Klose <doko@ubuntu.com>
1191 * or32-opc.c (or32_print_register, or32_print_immediate,
1192 disassemble_insn): Don't rely on undefined sprintf behaviour.
1194 For older changes see ChangeLog-2008
1200 version-control: never