9 { 'include': 'common.json' }
10 { 'include': 'sockets.json' }
15 # Sets the password of a remote display session.
17 # @protocol: - 'vnc' to modify the VNC server password
18 # - 'spice' to modify the Spice server password
20 # @password: the new password
22 # @connected: how to handle existing clients when changing the
23 # password. If nothing is specified, defaults to 'keep'
24 # 'fail' to fail the command if clients are connected
25 # 'disconnect' to disconnect existing clients
26 # 'keep' to maintain existing clients
28 # Returns: - Nothing on success
29 # - If Spice is not enabled, DeviceNotFound
35 # -> { "execute": "set_password", "arguments": { "protocol": "vnc",
36 # "password": "secret" } }
40 { 'command': 'set_password',
41 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
46 # Expire the password of a remote display server.
48 # @protocol: the name of the remote display protocol 'vnc' or 'spice'
50 # @time: when to expire the password.
52 # - 'now' to expire the password immediately
53 # - 'never' to cancel password expiration
54 # - '+INT' where INT is the number of seconds from now (integer)
55 # - 'INT' where INT is the absolute time in seconds
57 # Returns: - Nothing on success
58 # - If @protocol is 'spice' and Spice is not active, DeviceNotFound
62 # Notes: Time is relative to the server and currently there is no way to
63 # coordinate server time with client time. It is not recommended to
64 # use the absolute time version of the @time parameter unless you're
65 # sure you are on the same machine as the QEMU instance.
69 # -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
74 { 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
79 # Write a PPM of the VGA screen to a file.
81 # @filename: the path of a new PPM file to store the image
83 # @device: ID of the display device that should be dumped. If this parameter
84 # is missing, the primary display will be used. (Since 2.12)
86 # @head: head to use in case the device supports multiple heads. If this
87 # parameter is missing, head #0 will be used. Also note that the head
88 # can only be specified in conjunction with the device ID. (Since 2.12)
90 # Returns: Nothing on success
96 # -> { "execute": "screendump",
97 # "arguments": { "filename": "/tmp/image" } }
101 { 'command': 'screendump',
102 'data': {'filename': 'str', '*device': 'str', '*head': 'int'},
112 # The basic information for SPICE network connection
118 # @family: address family
122 { 'struct': 'SpiceBasicInfo',
123 'data': { 'host': 'str',
125 'family': 'NetworkAddressFamily' },
126 'if': 'CONFIG_SPICE' }
131 # Information about a SPICE server
133 # @auth: authentication method
137 { 'struct': 'SpiceServerInfo',
138 'base': 'SpiceBasicInfo',
139 'data': { '*auth': 'str' },
140 'if': 'CONFIG_SPICE' }
145 # Information about a SPICE client channel.
147 # @connection-id: SPICE connection id number. All channels with the same id
148 # belong to the same SPICE session.
150 # @channel-type: SPICE channel type number. "1" is the main control
151 # channel, filter for this one if you want to track spice
154 # @channel-id: SPICE channel ID number. Usually "0", might be different when
155 # multiple channels of the same type exist, such as multiple
156 # display channels in a multihead setup
158 # @tls: true if the channel is encrypted, false otherwise.
162 { 'struct': 'SpiceChannel',
163 'base': 'SpiceBasicInfo',
164 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int',
166 'if': 'CONFIG_SPICE' }
169 # @SpiceQueryMouseMode:
171 # An enumeration of Spice mouse states.
173 # @client: Mouse cursor position is determined by the client.
175 # @server: Mouse cursor position is determined by the server.
177 # @unknown: No information is available about mouse mode used by
180 # Note: spice/enums.h has a SpiceMouseMode already, hence the name.
184 { 'enum': 'SpiceQueryMouseMode',
185 'data': [ 'client', 'server', 'unknown' ],
186 'if': 'CONFIG_SPICE' }
191 # Information about the SPICE session.
193 # @enabled: true if the SPICE server is enabled, false otherwise
195 # @migrated: true if the last guest migration completed and spice
196 # migration had completed as well. false otherwise. (since 1.4)
198 # @host: The hostname the SPICE server is bound to. This depends on
199 # the name resolution on the host and may be an IP address.
201 # @port: The SPICE server's port number.
203 # @compiled-version: SPICE server version.
205 # @tls-port: The SPICE server's TLS port number.
207 # @auth: the current authentication type used by the server
209 # - 'none' if no authentication is being used
210 # - 'spice' uses SASL or direct TLS authentication, depending on command
213 # @mouse-mode: The mode in which the mouse cursor is displayed currently. Can
214 # be determined by the client or the server, or unknown if spice
215 # server doesn't provide this information. (since: 1.1)
217 # @channels: a list of @SpiceChannel for each active spice channel
221 { 'struct': 'SpiceInfo',
222 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int',
223 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str',
224 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']},
225 'if': 'CONFIG_SPICE' }
230 # Returns information about the current SPICE server
232 # Returns: @SpiceInfo
238 # -> { "execute": "query-spice" }
250 # "connection-id": 1804289383,
251 # "host": "127.0.0.1",
259 # "connection-id": 1804289383,
260 # "host": "127.0.0.1",
264 # [ ... more channels follow ... ]
270 { 'command': 'query-spice', 'returns': 'SpiceInfo',
271 'if': 'CONFIG_SPICE' }
276 # Emitted when a SPICE client establishes a connection
278 # @server: server information
280 # @client: client information
286 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
287 # "event": "SPICE_CONNECTED",
289 # "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
290 # "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
294 { 'event': 'SPICE_CONNECTED',
295 'data': { 'server': 'SpiceBasicInfo',
296 'client': 'SpiceBasicInfo' },
297 'if': 'CONFIG_SPICE' }
300 # @SPICE_INITIALIZED:
302 # Emitted after initial handshake and authentication takes place (if any)
303 # and the SPICE channel is up and running
305 # @server: server information
307 # @client: client information
313 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
314 # "event": "SPICE_INITIALIZED",
315 # "data": {"server": {"auth": "spice", "port": "5921",
316 # "family": "ipv4", "host": "127.0.0.1"},
317 # "client": {"port": "49004", "family": "ipv4", "channel-type": 3,
318 # "connection-id": 1804289383, "host": "127.0.0.1",
319 # "channel-id": 0, "tls": true}
323 { 'event': 'SPICE_INITIALIZED',
324 'data': { 'server': 'SpiceServerInfo',
325 'client': 'SpiceChannel' },
326 'if': 'CONFIG_SPICE' }
329 # @SPICE_DISCONNECTED:
331 # Emitted when the SPICE connection is closed
333 # @server: server information
335 # @client: client information
341 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
342 # "event": "SPICE_DISCONNECTED",
344 # "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
345 # "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
349 { 'event': 'SPICE_DISCONNECTED',
350 'data': { 'server': 'SpiceBasicInfo',
351 'client': 'SpiceBasicInfo' },
352 'if': 'CONFIG_SPICE' }
355 # @SPICE_MIGRATE_COMPLETED:
357 # Emitted when SPICE migration has completed
363 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
364 # "event": "SPICE_MIGRATE_COMPLETED" }
367 { 'event': 'SPICE_MIGRATE_COMPLETED',
368 'if': 'CONFIG_SPICE' }
377 # The basic information for vnc network connection
381 # @service: The service name of the vnc port. This may depend on the host
382 # system's service database so symbolic names should not be relied
385 # @family: address family
387 # @websocket: true in case the socket is a websocket (since 2.3).
391 { 'struct': 'VncBasicInfo',
392 'data': { 'host': 'str',
394 'family': 'NetworkAddressFamily',
395 'websocket': 'bool' },
401 # The network connection information for server
403 # @auth: authentication method used for
404 # the plain (non-websocket) VNC server
408 { 'struct': 'VncServerInfo',
409 'base': 'VncBasicInfo',
410 'data': { '*auth': 'str' },
416 # Information about a connected VNC client.
418 # @x509_dname: If x509 authentication is in use, the Distinguished
419 # Name of the client.
421 # @sasl_username: If SASL authentication is in use, the SASL username
422 # used for authentication.
426 { 'struct': 'VncClientInfo',
427 'base': 'VncBasicInfo',
428 'data': { '*x509_dname': 'str', '*sasl_username': 'str' },
434 # Information about the VNC session.
436 # @enabled: true if the VNC server is enabled, false otherwise
438 # @host: The hostname the VNC server is bound to. This depends on
439 # the name resolution on the host and may be an IP address.
441 # @family: - 'ipv6' if the host is listening for IPv6 connections
442 # - 'ipv4' if the host is listening for IPv4 connections
443 # - 'unix' if the host is listening on a unix domain socket
444 # - 'unknown' otherwise
446 # @service: The service name of the server's port. This may depends
447 # on the host system's service database so symbolic names should not
450 # @auth: the current authentication type used by the server
452 # - 'none' if no authentication is being used
453 # - 'vnc' if VNC authentication is being used
454 # - 'vencrypt+plain' if VEncrypt is used with plain text authentication
455 # - 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
456 # - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
457 # - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
458 # - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
459 # - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
460 # - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
461 # - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
462 # - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
464 # @clients: a list of @VncClientInfo of all currently connected clients
468 { 'struct': 'VncInfo',
469 'data': {'enabled': 'bool', '*host': 'str',
470 '*family': 'NetworkAddressFamily',
471 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']},
477 # vnc primary authentication method.
481 { 'enum': 'VncPrimaryAuth',
482 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
483 'tls', 'vencrypt', 'sasl' ],
487 # @VncVencryptSubAuth:
489 # vnc sub authentication method with vencrypt.
493 { 'enum': 'VncVencryptSubAuth',
495 'tls-none', 'x509-none',
496 'tls-vnc', 'x509-vnc',
497 'tls-plain', 'x509-plain',
498 'tls-sasl', 'x509-sasl' ],
504 # The network connection information for server
506 # @auth: The current authentication type used by the servers
508 # @vencrypt: The vencrypt sub authentication type used by the
509 # servers, only specified in case auth == vencrypt.
513 { 'struct': 'VncServerInfo2',
514 'base': 'VncBasicInfo',
515 'data': { 'auth' : 'VncPrimaryAuth',
516 '*vencrypt' : 'VncVencryptSubAuth' },
522 # Information about a vnc server
524 # @id: vnc server name.
526 # @server: A list of @VncBasincInfo describing all listening sockets.
527 # The list can be empty (in case the vnc server is disabled).
528 # It also may have multiple entries: normal + websocket,
529 # possibly also ipv4 + ipv6 in the future.
531 # @clients: A list of @VncClientInfo of all currently connected clients.
532 # The list can be empty, for obvious reasons.
534 # @auth: The current authentication type used by the non-websockets servers
536 # @vencrypt: The vencrypt authentication type used by the servers,
537 # only specified in case auth == vencrypt.
539 # @display: The display device the vnc server is linked to.
543 { 'struct': 'VncInfo2',
544 'data': { 'id' : 'str',
545 'server' : ['VncServerInfo2'],
546 'clients' : ['VncClientInfo'],
547 'auth' : 'VncPrimaryAuth',
548 '*vencrypt' : 'VncVencryptSubAuth',
549 '*display' : 'str' },
555 # Returns information about the current VNC server
563 # -> { "execute": "query-vnc" }
572 # "host":"127.0.0.1",
581 { 'command': 'query-vnc', 'returns': 'VncInfo',
584 # @query-vnc-servers:
586 # Returns a list of vnc servers. The list can be empty.
588 # Returns: a list of @VncInfo2
592 { 'command': 'query-vnc-servers', 'returns': ['VncInfo2'],
596 # @change-vnc-password:
598 # Change the VNC server password.
600 # @password: the new password to use with VNC authentication
604 # Notes: An empty password in this command will set the password to the empty
605 # string. Existing clients are unaffected by executing this command.
607 { 'command': 'change-vnc-password',
608 'data': { 'password': 'str' },
614 # Emitted when a VNC client establishes a connection
616 # @server: server information
618 # @client: client information
620 # Note: This event is emitted before any authentication takes place, thus
621 # the authentication ID is not provided
627 # <- { "event": "VNC_CONNECTED",
629 # "server": { "auth": "sasl", "family": "ipv4",
630 # "service": "5901", "host": "0.0.0.0" },
631 # "client": { "family": "ipv4", "service": "58425",
632 # "host": "127.0.0.1" } },
633 # "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
636 { 'event': 'VNC_CONNECTED',
637 'data': { 'server': 'VncServerInfo',
638 'client': 'VncBasicInfo' },
644 # Emitted after authentication takes place (if any) and the VNC session is
647 # @server: server information
649 # @client: client information
655 # <- { "event": "VNC_INITIALIZED",
657 # "server": { "auth": "sasl", "family": "ipv4",
658 # "service": "5901", "host": "0.0.0.0"},
659 # "client": { "family": "ipv4", "service": "46089",
660 # "host": "127.0.0.1", "sasl_username": "luiz" } },
661 # "timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
664 { 'event': 'VNC_INITIALIZED',
665 'data': { 'server': 'VncServerInfo',
666 'client': 'VncClientInfo' },
672 # Emitted when the connection is closed
674 # @server: server information
676 # @client: client information
682 # <- { "event": "VNC_DISCONNECTED",
684 # "server": { "auth": "sasl", "family": "ipv4",
685 # "service": "5901", "host": "0.0.0.0" },
686 # "client": { "family": "ipv4", "service": "58425",
687 # "host": "127.0.0.1", "sasl_username": "luiz" } },
688 # "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
691 { 'event': 'VNC_DISCONNECTED',
692 'data': { 'server': 'VncServerInfo',
693 'client': 'VncClientInfo' },
703 # Information about a mouse device.
705 # @name: the name of the mouse device
707 # @index: the index of the mouse device
709 # @current: true if this device is currently receiving mouse events
711 # @absolute: true if this device supports absolute coordinates as input
715 { 'struct': 'MouseInfo',
716 'data': {'name': 'str', 'index': 'int', 'current': 'bool',
717 'absolute': 'bool'} }
722 # Returns information about each active mouse device
724 # Returns: a list of @MouseInfo for each device
730 # -> { "execute": "query-mice" }
733 # "name":"QEMU Microsoft Mouse",
739 # "name":"QEMU PS/2 Mouse",
748 { 'command': 'query-mice', 'returns': ['MouseInfo'] }
753 # An enumeration of key name.
755 # This is used by the @send-key command.
757 # @unmapped: since 2.0
760 # @kp_comma: since 2.4
761 # @kp_equals: since 2.6
763 # @hiragana: since 2.9
769 # @audionext: since 2.10
770 # @audioprev: since 2.10
771 # @audiostop: since 2.10
772 # @audioplay: since 2.10
773 # @audiomute: since 2.10
774 # @volumeup: since 2.10
775 # @volumedown: since 2.10
776 # @mediaselect: since 2.10
778 # @calculator: since 2.10
779 # @computer: since 2.10
780 # @ac_home: since 2.10
781 # @ac_back: since 2.10
782 # @ac_forward: since 2.10
783 # @ac_refresh: since 2.10
784 # @ac_bookmarks: since 2.10
786 # @muhenkan: since 2.12
787 # @katakanahiragana: since 2.12
792 # 'sysrq' was mistakenly added to hack around the fact that
793 # the ps2 driver was not generating correct scancodes sequences
794 # when 'alt+print' was pressed. This flaw is now fixed and the
795 # 'sysrq' key serves no further purpose. Any further use of
796 # 'sysrq' will be transparently changed to 'print', so they
797 # are effectively synonyms.
802 { 'enum': 'QKeyCode',
803 'data': [ 'unmapped',
804 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl',
805 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8',
806 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e',
807 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right',
808 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon',
809 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b',
810 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock',
811 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10',
812 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply',
813 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0',
814 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8',
815 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end',
816 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again',
817 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut',
818 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause',
819 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana',
820 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake',
821 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute',
822 'volumeup', 'volumedown', 'mediaselect',
823 'mail', 'calculator', 'computer',
824 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks',
832 { 'enum': 'KeyValueKind',
833 'data': [ 'number', 'qcode' ] }
840 { 'struct': 'IntWrapper',
841 'data': { 'data': 'int' } }
848 { 'struct': 'QKeyCodeWrapper',
849 'data': { 'data': 'QKeyCode' } }
854 # Represents a keyboard key.
858 { 'union': 'KeyValue',
859 'base': { 'type': 'KeyValueKind' },
860 'discriminator': 'type',
862 'number': 'IntWrapper',
863 'qcode': 'QKeyCodeWrapper' } }
868 # Send keys to guest.
870 # @keys: An array of @KeyValue elements. All @KeyValues in this array are
871 # simultaneously sent to the guest. A @KeyValue.number value is sent
872 # directly to the guest, while @KeyValue.qcode must be a valid
875 # @hold-time: time to delay key up events, milliseconds. Defaults
878 # Returns: - Nothing on success
879 # - If key is unknown or redundant, InvalidParameter
885 # -> { "execute": "send-key",
886 # "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
887 # { "type": "qcode", "data": "alt" },
888 # { "type": "qcode", "data": "delete" } ] } }
889 # <- { "return": {} }
892 { 'command': 'send-key',
893 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } }
898 # Button of a pointer input device (mouse, tablet).
900 # @side: front side button of a 5-button mouse (since 2.9)
902 # @extra: rear side button of a 5-button mouse (since 2.9)
906 { 'enum' : 'InputButton',
907 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side',
913 # Position axis of a pointer input device (mouse, tablet).
917 { 'enum' : 'InputAxis',
918 'data' : [ 'x', 'y' ] }
923 # Keyboard input event.
925 # @key: Which key this event is for.
926 # @down: True for key-down and false for key-up events.
930 { 'struct' : 'InputKeyEvent',
931 'data' : { 'key' : 'KeyValue',
937 # Pointer button input event.
939 # @button: Which button this event is for.
940 # @down: True for key-down and false for key-up events.
944 { 'struct' : 'InputBtnEvent',
945 'data' : { 'button' : 'InputButton',
951 # Pointer motion input event.
953 # @axis: Which axis is referenced by @value.
954 # @value: Pointer position. For absolute coordinates the
955 # valid range is 0 -> 0x7ffff
959 { 'struct' : 'InputMoveEvent',
960 'data' : { 'axis' : 'InputAxis',
968 { 'enum': 'InputEventKind',
969 'data': [ 'key', 'btn', 'rel', 'abs' ] }
972 # @InputKeyEventWrapper:
976 { 'struct': 'InputKeyEventWrapper',
977 'data': { 'data': 'InputKeyEvent' } }
980 # @InputBtnEventWrapper:
984 { 'struct': 'InputBtnEventWrapper',
985 'data': { 'data': 'InputBtnEvent' } }
988 # @InputMoveEventWrapper:
992 { 'struct': 'InputMoveEventWrapper',
993 'data': { 'data': 'InputMoveEvent' } }
1000 # @type: the input type, one of:
1002 # - 'key': Input event of Keyboard
1003 # - 'btn': Input event of pointer buttons
1004 # - 'rel': Input event of relative pointer motion
1005 # - 'abs': Input event of absolute pointer motion
1009 { 'union' : 'InputEvent',
1010 'base': { 'type': 'InputEventKind' },
1011 'discriminator': 'type',
1012 'data' : { 'key' : 'InputKeyEventWrapper',
1013 'btn' : 'InputBtnEventWrapper',
1014 'rel' : 'InputMoveEventWrapper',
1015 'abs' : 'InputMoveEventWrapper' } }
1018 # @input-send-event:
1020 # Send input event(s) to guest.
1022 # The @device and @head parameters can be used to send the input event
1023 # to specific input devices in case (a) multiple input devices of the
1024 # same kind are added to the virtual machine and (b) you have
1025 # configured input routing (see docs/multiseat.txt) for those input
1026 # devices. The parameters work exactly like the device and head
1027 # properties of input devices. If @device is missing, only devices
1028 # that have no input routing config are admissible. If @device is
1029 # specified, both input devices with and without input routing config
1030 # are admissible, but devices with input routing config take
1033 # @device: display device to send event(s) to.
1034 # @head: head to send event(s) to, in case the
1035 # display device supports multiple scanouts.
1036 # @events: List of InputEvent union.
1038 # Returns: Nothing on success.
1042 # Note: The consoles are visible in the qom tree, under
1043 # /backend/console[$index]. They have a device link and head property,
1044 # so it is possible to map which console belongs to which device and
1049 # 1. Press left mouse button.
1051 # -> { "execute": "input-send-event",
1052 # "arguments": { "device": "video0",
1053 # "events": [ { "type": "btn",
1054 # "data" : { "down": true, "button": "left" } } ] } }
1055 # <- { "return": {} }
1057 # -> { "execute": "input-send-event",
1058 # "arguments": { "device": "video0",
1059 # "events": [ { "type": "btn",
1060 # "data" : { "down": false, "button": "left" } } ] } }
1061 # <- { "return": {} }
1063 # 2. Press ctrl-alt-del.
1065 # -> { "execute": "input-send-event",
1066 # "arguments": { "events": [
1067 # { "type": "key", "data" : { "down": true,
1068 # "key": {"type": "qcode", "data": "ctrl" } } },
1069 # { "type": "key", "data" : { "down": true,
1070 # "key": {"type": "qcode", "data": "alt" } } },
1071 # { "type": "key", "data" : { "down": true,
1072 # "key": {"type": "qcode", "data": "delete" } } } ] } }
1073 # <- { "return": {} }
1075 # 3. Move mouse pointer to absolute coordinates (20000, 400).
1077 # -> { "execute": "input-send-event" ,
1078 # "arguments": { "events": [
1079 # { "type": "abs", "data" : { "axis": "x", "value" : 20000 } },
1080 # { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } }
1081 # <- { "return": {} }
1084 { 'command': 'input-send-event',
1085 'data': { '*device': 'str',
1087 'events' : [ 'InputEvent' ] } }
1092 # GTK display options.
1094 # @grab-on-hover: Grab keyboard input on mouse hover.
1095 # @zoom-to-fit: Zoom guest display to fit into the host window. When
1096 # turned off the host window will be resized instead.
1097 # In case the display device can notify the guest on
1098 # window resizes (virtio-gpu) this will default to "on",
1099 # assuming the guest will resize the display to match
1100 # the window size then. Otherwise it defaults to "off".
1106 { 'struct' : 'DisplayGTK',
1107 'data' : { '*grab-on-hover' : 'bool',
1108 '*zoom-to-fit' : 'bool' } }
1111 # @DisplayEGLHeadless:
1113 # EGL headless display options.
1115 # @rendernode: Which DRM render node should be used. Default is the first
1116 # available node on the host.
1121 { 'struct' : 'DisplayEGLHeadless',
1122 'data' : { '*rendernode' : 'str' } }
1127 # DBus display options.
1129 # @addr: The D-Bus bus address (default to the session bus).
1131 # @rendernode: Which DRM render node should be used. Default is the first
1132 # available node on the host.
1134 # @p2p: Whether to use peer-to-peer connections (accepted through
1140 { 'struct' : 'DisplayDBus',
1141 'data' : { '*rendernode' : 'str',
1148 # Display OpenGL mode.
1150 # @off: Disable OpenGL (default).
1151 # @on: Use OpenGL, pick context type automatically.
1152 # Would better be named 'auto' but is called 'on' for backward
1153 # compatibility with bool type.
1154 # @core: Use OpenGL with Core (desktop) Context.
1155 # @es: Use OpenGL with ES (embedded systems) Context.
1160 { 'enum' : 'DisplayGLMode',
1161 'data' : [ 'off', 'on', 'core', 'es' ] }
1166 # Curses display options.
1168 # @charset: Font charset used by guest (default: CP437).
1173 { 'struct' : 'DisplayCurses',
1174 'data' : { '*charset' : 'str' } }
1179 # Display (user interface) type.
1181 # @default: The default user interface, selecting from the first available
1182 # of gtk, sdl, cocoa, and vnc.
1184 # @none: No user interface or video output display. The guest will
1185 # still see an emulated graphics card, but its output will not
1186 # be displayed to the QEMU user.
1188 # @gtk: The GTK user interface.
1190 # @sdl: The SDL user interface.
1192 # @egl-headless: No user interface, offload GL operations to a local
1193 # DRI device. Graphical display need to be paired with
1194 # VNC or Spice. (Since 3.1)
1196 # @curses: Display video output via curses. For graphics device
1197 # models which support a text mode, QEMU can display this
1198 # output using a curses/ncurses interface. Nothing is
1199 # displayed when the graphics device is in graphical mode or
1200 # if the graphics device does not support a text
1201 # mode. Generally only the VGA device models support text
1204 # @cocoa: The Cocoa user interface.
1206 # @spice-app: Set up a Spice server and run the default associated
1207 # application to connect to it. The server will redirect
1208 # the serial console and QEMU monitors. (Since 4.0)
1210 # @dbus: Start a D-Bus service for the display. (Since 7.0)
1215 { 'enum' : 'DisplayType',
1217 { 'name': 'default' },
1219 { 'name': 'gtk', 'if': 'CONFIG_GTK' },
1220 { 'name': 'sdl', 'if': 'CONFIG_SDL' },
1221 { 'name': 'egl-headless',
1222 'if': { 'all': ['CONFIG_OPENGL', 'CONFIG_GBM'] } },
1223 { 'name': 'curses', 'if': 'CONFIG_CURSES' },
1224 { 'name': 'cocoa', 'if': 'CONFIG_COCOA' },
1225 { 'name': 'spice-app', 'if': 'CONFIG_SPICE' },
1226 { 'name': 'dbus', 'if': 'CONFIG_DBUS_DISPLAY' }
1233 # Display (user interface) options.
1235 # @type: Which DisplayType qemu should use.
1236 # @full-screen: Start user interface in fullscreen mode (default: off).
1237 # @window-close: Allow to quit qemu with window close button (default: on).
1238 # @show-cursor: Force showing the mouse cursor (default: off).
1240 # @gl: Enable OpenGL support (default: off).
1245 { 'union' : 'DisplayOptions',
1246 'base' : { 'type' : 'DisplayType',
1247 '*full-screen' : 'bool',
1248 '*window-close' : 'bool',
1249 '*show-cursor' : 'bool',
1250 '*gl' : 'DisplayGLMode' },
1251 'discriminator' : 'type',
1253 'gtk': { 'type': 'DisplayGTK', 'if': 'CONFIG_GTK' },
1254 'curses': { 'type': 'DisplayCurses', 'if': 'CONFIG_CURSES' },
1255 'egl-headless': { 'type': 'DisplayEGLHeadless',
1256 'if': { 'all': ['CONFIG_OPENGL', 'CONFIG_GBM'] } },
1257 'dbus': { 'type': 'DisplayDBus', 'if': 'CONFIG_DBUS_DISPLAY' }
1262 # @query-display-options:
1264 # Returns information about display configuration
1266 # Returns: @DisplayOptions
1271 { 'command': 'query-display-options',
1272 'returns': 'DisplayOptions' }
1275 # @DisplayReloadType:
1277 # Available DisplayReload types.
1284 { 'enum': 'DisplayReloadType',
1288 # @DisplayReloadOptionsVNC:
1290 # Specify the VNC reload options.
1292 # @tls-certs: reload tls certs or not.
1297 { 'struct': 'DisplayReloadOptionsVNC',
1298 'data': { '*tls-certs': 'bool' } }
1301 # @DisplayReloadOptions:
1303 # Options of the display configuration reload.
1305 # @type: Specify the display type.
1310 { 'union': 'DisplayReloadOptions',
1311 'base': {'type': 'DisplayReloadType'},
1312 'discriminator': 'type',
1313 'data': { 'vnc': 'DisplayReloadOptionsVNC' } }
1318 # Reload display configuration.
1320 # Returns: Nothing on success.
1326 # -> { "execute": "display-reload",
1327 # "arguments": { "type": "vnc", "tls-certs": true } }
1328 # <- { "return": {} }
1331 { 'command': 'display-reload',
1332 'data': 'DisplayReloadOptions',