1 <?xml version="1.0" encoding="utf-8"?>
5 ** Copyright 2007 The Android Open Source Project
7 ** Licensed under the Apache License, Version 2.0 (the "License");
8 ** you may not use this file except in compliance with the License.
9 ** You may obtain a copy of the License at
11 ** http://www.apache.org/licenses/LICENSE-2.0
13 ** Unless required by applicable law or agreed to in writing, software
14 ** distributed under the License is distributed on an "AS IS" BASIS,
15 ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
16 ** See the License for the specific language governing permissions and
17 ** limitations under the License.
20 <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
21 <!-- Choices for timezone picker first level.
22 These values will be used as search terms for TimeZone displayName
24 <!-- The time zone picker screen has two levels. The first level allows the user to choose a region. -->
25 <string-array name="timezone_filters">
26 <!-- The next level of the time zoner picker should show time zones from the Americas. -->
28 <!-- The next level of the time zoner picker should show time zones from Europe. -->
30 <!-- The next level of the time zoner picker should show time zones from Africa. -->
32 <!-- The next level of the time zoner picker should show time zones from Asia. -->
34 <!-- The next level of the time zoner picker should show time zones from Australia. -->
35 <item>Australia</item>
36 <!-- The next level of the time zoner picker should show time zones from Pacific. -->
38 <!-- The next level of the time zoner picker should show time zones from ALL regions. -->
42 <!-- There is a setting to control the format of dates displayed throughout the system. This is in the Date & Time Settings screen. These will be adjusted to use punctuation appropriate to the user's locale. -->
43 <string-array name="date_format_values" translatable="false">
44 <!-- The blank item means to use whatever the locale calls for. -->
46 <item>MM-dd-yyyy</item>
47 <item>dd-MM-yyyy</item>
48 <item>yyyy-MM-dd</item>
51 <!-- Display settings. The type of animations to show. -->
52 <string-array name="animations_entries">
53 <item>No animations</item>
54 <item>Some animations</item>
55 <item>All animations</item>
58 <!-- Display settings. Summary for each type of animation. -->
59 <string-array name="animations_summaries">
60 <item>No window animations are shown</item>
61 <item>Some window animations are shown</item>
62 <item>All window animations are shown</item>
65 <!-- Do not translate. -->
66 <string-array name="animations_values">
67 <!-- Do not translate. -->
69 <!-- Do not translate. -->
71 <!-- Do not translate. -->
75 <!-- Display settings. The delay in inactivity before the screen is turned off. These are shown in a list dialog. -->
76 <string-array name="screen_timeout_entries">
77 <item>15 seconds</item>
78 <item>30 seconds</item>
80 <item>2 minutes</item>
81 <item>5 minutes</item>
82 <item>10 minutes</item>
83 <item>30 minutes</item>
86 <!-- Do not translate. -->
87 <string-array name="screen_timeout_values" translatable="false">
88 <!-- Do not translate. -->
90 <!-- Do not translate. -->
92 <!-- Do not translate. -->
94 <!-- Do not translate. -->
96 <!-- Do not translate. -->
98 <!-- Do not translate. -->
100 <!-- Do not translate. -->
104 <!-- Security settings. The delay after screen is turned off until device locks.
105 These are shown in a list dialog. -->
106 <string-array name="lock_after_timeout_entries">
107 <item>immediately</item>
108 <item>5 seconds</item>
109 <item>15 seconds</item>
110 <item>30 seconds</item>
111 <item>1 minute</item>
112 <item>2 minutes</item>
113 <item>5 minutes</item>
114 <item>10 minutes</item>
115 <item>30 minutes</item>
118 <!-- Do not translate. -->
119 <string-array name="lock_after_timeout_values" translatable="false">
120 <!-- Do not translate. -->
122 <!-- Do not translate. -->
124 <!-- Do not translate. -->
126 <!-- Do not translate. -->
128 <!-- Do not translate. -->
130 <!-- Do not translate. -->
132 <!-- Do not translate. -->
134 <!-- Do not translate. -->
136 <!-- Do not translate. -->
140 <!-- TTS settings -->
142 <!-- Default speech rate choices -->
143 <string-array name="tts_rate_entries">
144 <item>Very slow</item>
148 <item>Very fast</item>
150 <!-- Do not translate. -->
151 <string-array name="tts_rate_values">
159 <!-- Default pitch choices -->
160 <string-array name="tts_pitch_entries">
161 <item>Very low</item>
165 <item>Very high</item>
167 <!-- Do not translate. -->
168 <string-array name="tts_pitch_values">
176 <!-- Default language choices -->
177 <string-array name="tts_lang_entries">
178 <item>American English</item>
179 <item>British English</item>
185 <!-- Do not translate. -->
186 <string-array name="tts_lang_values">
194 <!-- Do not translate. -->
195 <string-array name="tts_demo_strings">
196 <item>This is an example of speech synthesis in English.</item>
197 <item>This is an example of speech synthesis in English.</item>
198 <item>Voici un échantillon de synthèse vocale en français.</item>
199 <item>Dies ist ein Beispiel für Sprachsynthese in Deutsch.</item>
200 <item>Questo è un esempio di sintesi vocale in italiano.</item>
201 <item>Este es un ejemplo de síntesis de voz en español.</item>
203 <!-- Do not translate. -->
204 <string-array name="tts_engine_entries">
205 <item>Pico TTS</item>
207 <!-- Do not translate. -->
208 <string-array name="tts_engine_values">
209 <item>com.svox.pico</item>
213 <!-- Wi-Fi settings -->
215 <!-- Match this with the order of NetworkInfo.DetailedState. --> <skip />
216 <!-- Wi-Fi settings. The status messages when the network is unknown. -->
217 <string-array name="wifi_status">
218 <!-- Status message of Wi-Fi when it is idle. -->
220 <!-- Status message of Wi-Fi when it is scanning. -->
221 <item>Scanning\u2026</item>
222 <!-- Status message of Wi-Fi when it is connecting. -->
223 <item>Connecting\u2026</item>
224 <!-- Status message of Wi-Fi when it is authenticating. -->
225 <item>Authenticating\u2026</item>
226 <!-- Status message of Wi-Fi when it is obtaining IP address. -->
227 <item>Obtaining IP address\u2026</item>
228 <!-- Status message of Wi-Fi when it is connected. -->
229 <item>Connected</item>
230 <!-- Status message of Wi-Fi when it is suspended. -->
231 <item>Suspended</item>
232 <!-- Status message of Wi-Fi when it is disconnecting. -->
233 <item>Disconnecting\u2026</item>
234 <!-- Status message of Wi-Fi when it is disconnected. -->
235 <item>Disconnected</item>
236 <!-- Status message of Wi-Fi when it is a failure. -->
237 <item>Unsuccessful</item>
240 <!-- Match this with the order of NetworkInfo.DetailedState. --> <skip />
241 <!-- Wi-Fi settings. The status messages when the network is known. -->
242 <string-array name="wifi_status_with_ssid">
243 <!-- Status message of Wi-Fi when it is idle. -->
245 <!-- Status message of Wi-Fi when it is scanning. -->
246 <item>Scanning\u2026</item>
247 <!-- Status message of Wi-Fi when it is connecting to a network. -->
248 <item>Connecting to <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
249 <!-- Status message of Wi-Fi when it is authenticating with a network. -->
250 <item>Authenticating with <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
251 <!-- Status message of Wi-Fi when it is obtaining IP address from a network. -->
252 <item>Obtaining IP address from <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
253 <!-- Status message of Wi-Fi when it is connected to a network. -->
254 <item>Connected to <xliff:g id="network_name">%1$s</xliff:g></item>
255 <!-- Status message of Wi-Fi when it is suspended. -->
256 <item>Suspended</item>
257 <!-- Status message of Wi-Fi when it is disconnecting from a network. -->
258 <item>Disconnecting from <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
259 <!-- Status message of Wi-Fi when it is disconnected. -->
260 <item>Disconnected</item>
261 <!-- Status message of Wi-Fi when it is a failure. -->
262 <item>Unsuccessful</item>
265 <!-- Match this with the constants in AccessPoint. --> <skip />
266 <!-- Wi-Fi settings. The type of security a Wi-Fi network has. -->
267 <string-array name="wifi_security">
268 <!-- The Wi-Fi network does not have any security. -->
270 <!-- Do not translate. -->
272 <!-- Do not translate. -->
273 <item>WPA/WPA2 PSK</item>
274 <!-- Do not translate. -->
275 <item>802.1x EAP</item>
278 <!-- Wi-Fi AP settings. The type of security a Wi-Fi AP supports. -->
279 <!-- Note that adding/removing/moving the items will need wifi settings code change. -->
280 <string-array name="wifi_ap_security" translatable="false">
282 <!-- Do not translate. -->
284 <!-- Do not translate. -->
285 <item>WPA2 PSK</item>
288 <!-- Match this with the constants in WifiDialog. --> <skip />
289 <!-- Wi-Fi settings. The type of EAP method a Wi-Fi network has. -->
290 <string-array name="wifi_eap_method">
291 <!-- Do not translate. -->
293 <!-- Do not translate. -->
295 <!-- Do not translate. -->
299 <!-- Bluetooth Settings -->
301 <!-- Discoverable mode timeout options -->
302 <string-array name="bluetooth_visibility_timeout_entries">
303 <item>2 Minutes</item>
304 <item>5 Minutes</item>
309 <!-- Values for visibility_duration_entries matching constants in BluetoothSettings. Do not translate. -->
310 <string-array name="bluetooth_visibility_timeout_values" translatable="false">
317 <!-- Match this with drawable.wifi_signal. --> <skip />
318 <!-- Wi-Fi settings. The signal strength a Wi-Fi network has. -->
319 <string-array name="wifi_signal">
323 <item>Excellent</item>
326 <!-- Wi-Fi settings. Presented as a list dialog to the user to choose the Wi-Fi sleep policy. -->
327 <string-array name="wifi_sleep_policy_entries">
328 <!-- Wi-Fi should go to sleep when the screen turns off. -->
329 <item>When screen turns off (uses more mobile data)</item>
330 <!-- When plugged in, never go to sleep. When on battery, go to sleep when screen turns off. -->
331 <item>Never when plugged in</item>
332 <!-- Never go to sleep. -->
333 <item>Never (uses more battery power)</item>
336 <!-- Wi-Fi settings. Presented as a list dialog to the user to choose the Wi-Fi sleep policy. Used when
337 the device is Wi-Fi-only. [CHAR LIMIT=30] -->
338 <string-array name="wifi_sleep_policy_entries_wifi_only">
339 <!-- Wi-Fi should go to sleep when the screen turns off, for Wi-Fi-only devices. -->
340 <item>When screen turns off</item>
341 <!-- When plugged in, never go to sleep. When on battery, go to sleep when screen turns off. -->
342 <item>Never when plugged in</item>
343 <!-- Never go to sleep. -->
344 <item>Never (uses more battery power)</item>
347 <!-- Match with wifi_sleep_policy_entries and the values of the settings in Settings class. --> <skip />
348 <!-- Do not translate. -->
349 <string-array name="wifi_sleep_policy_values">
350 <!-- Do not translate. -->
352 <!-- Do not translate. -->
354 <!-- Do not translate. -->
358 <!-- Wi-Fi settings. Presented as a list dialog to the user to choose the Wi-Fi frequency band. -->
359 <string-array name="wifi_frequency_band_entries">
360 <!-- Operation on both 2.4 GHz and 5 GHz [CHAR LIMIT=25]-->
362 <!-- Operation on 5 GHz alone [CHAR LIMIT=25]-->
363 <item>5 GHz only</item>
364 <!-- Operation on 2.4 GHz alone [CHAR LIMIT=25]-->
365 <item>2.4 GHz only</item>
368 <!-- Match with wifi_frequency_band_entries and the values of the settings in WifiManager. -->
369 <!-- Do not translate. -->
370 <string-array name="wifi_frequency_band_values">
371 <!-- Do not translate. -->
373 <!-- Do not translate. -->
375 <!-- Do not translate. -->
380 <!-- Display options for UsageStats class -->
381 <string-array name="usage_stats_display_order_types">
382 <item>Usage Time</item>
383 <item>Launch Count</item>
384 <item>Application Name</item>
388 <string-array name="wifi_eap_entries">
394 <!-- Phase 2 options -->
395 <string-array name="wifi_phase2_entries">
399 <item>MSCHAPV2</item>
403 <!-- Wi-Fi set up options -->
404 <!-- Note that adding/removing/moving items will need wifi settings code change. -->
405 <string-array name="wifi_network_setup">
406 <!-- Manual wifi configuration [CHAR LIMIT=25]-->
408 <!-- WPS is a new standard that allowes secure connection establishment to a home wireless network using a simplified process. WPS push button based configuration involves pushing a button on the router and the device [CHAR LIMIT=25]-->
409 <item>WPS push button</item>
410 <!-- WPS pin method based configuration. This requires entering a pin obtained from the access point [CHAR LIMIT=25] -->
411 <item>WPS pin from access point</item>
412 <!-- WPS pin method based configuration. This requires generating a pin from this device [CHAR LIMIT=25] -->
413 <item>WPS pin from this device</item>
416 <!-- Wi-Fi IP settings. -->
417 <!-- Note that adding/removing/moving the items will need wifi settings code change. -->
418 <string-array name="wifi_ip_settings">
419 <!-- Use DHCP (Dynamic Host Configuration Protocol) for obtaining IP settings [CHAR LIMIT=25] -->
421 <!-- Use statically defined IP settings [CHAR LIMIT=25]-->
425 <!-- Wi-Fi proxy settings. -->
426 <!-- Note that adding/removing/moving the items will need wifi settings code change. -->
427 <string-array name="wifi_proxy_settings">
428 <!-- No HTTP proxy is used for the current wifi network [CHAR LIMIT=25] -->
430 <!-- Manual HTTP proxy settings are used for the current wifi network [CHAR LIMIT=25] -->
434 <!-- Sound settings for emergency tone. -->
435 <string-array name="emergency_tone_entries">
441 <!-- Do not translate. -->
442 <string-array name="emergency_tone_values">
448 <!-- Locales in this list are displayed with the corresponding
449 name from special_locale_names instead of using the name
450 from Locale.getDisplayName(). -->
451 <string-array translatable="false" name="special_locale_codes">
456 <string-array translatable="false" name="special_locale_names">
461 <!-- Authentication Types used in APN editor -->
462 <string-array name="apn_auth_entries">
466 <item>PAP or CHAP</item>
469 <string-array translatable="false" name="apn_auth_values">
470 <!-- Do not translate. -->
472 <!-- Do not translate. -->
474 <!-- Do not translate. -->
476 <!-- Do not translate. -->
480 <!-- Authentication Types used in APN editor -->
481 <string-array name="apn_protocol_entries">
484 <item>IPv4/IPv6</item>
487 <string-array translatable="false" name="apn_protocol_values">
488 <!-- Do not translate. -->
490 <!-- Do not translate. -->
492 <!-- Do not translate. -->
496 <!-- Apps on SD instalaltion location options in ApplicationSettings -->
497 <string-array name="app_install_location_entries">
498 <item>Internal device storage</item>
499 <item>Removable SD card</item>
500 <item>Let the system decide</item>
503 <!-- Do not translate. -->
504 <string-array name="app_install_location_values" translatable="false">
510 <!-- New incoming call vibrate options. -->
511 <string-array name="vibrate_entries">
514 <item>Only in Silent mode</item>
515 <item>Only when not in Silent mode</item>
518 <!-- Values for vibrate_entries matching constants in SoundSettings. Do not translate. -->
519 <string-array name="vibrate_values" translatable="false">
523 <item>notsilent</item>
526 <!-- Titles for the list of long press timeout options. -->
527 <string-array name="long_press_timeout_selector_titles">
528 <!-- A title for the option for short long-press timeout [CHAR LIMIT=25] -->
530 <!-- A title for the option for medium long-press timeout [CHAR LIMIT=25] -->
532 <!-- A title for the option for long long-press timeout [CHAR LIMIT=25] -->
536 <!-- Values for the list of long press timeout options. -->
537 <string-array name="long_press_timeout_selector_values" translatable="false">
543 <!-- Titles for HDCP checking preference. [CHAR LIMIT=35] -->
544 <string-array name="hdcp_checking_titles">
545 <item>Never check</item>
546 <item>Check for DRM content only</item>
547 <item>Always check</item>
550 <!-- Values for HDCP checking preference. -->
551 <string-array name="hdcp_checking_values" translatable="false" >
553 <item>drm-only</item>
557 <!-- Summaries for HDCP checking preference. [CHAR LIMIT=100]-->
558 <string-array name="hdcp_checking_summaries" >
559 <item>Never use HDCP checking</item>
560 <item>Use HDCP checking for DRM content only</item>
561 <item>Always use HDCP checking</item>