1 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
3 * avr/configure: Regenerate.
4 * cris/configure: Regenerate.
5 * microblaze/configure: Regenerate.
7 2010-01-02 Doug Evans <dje@sebabeach.org>
9 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
10 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
11 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
12 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
13 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
14 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
16 2010-01-01 Doug Evans <dje@sebabeach.org>
18 * cris/mloop.in: Fix copyright year update snafu.
20 2009-11-24 Joel Brobecker <brobecker@adacore.com>
22 * common/aclocal.m4: Add include of ../../config/zlib.m4.
23 * common/common.m4: Use AM_ZLIB to check for zlib support.
24 * ppc/configure.ac: Likewise.
25 * arm/configure, avr/configure, common/configure, cr16/configure,
26 cris/configure, d10v/configure, erc32/configure, frv/configure,
27 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
28 m32r/configure, m68hc11/configure, mcore/configure,
29 microblaze/configure, mips/configure, mn10300/configure,
30 moxie/configure, ppc/configure, sh/configure, sh64/configure,
31 v850/configure: Regenerate.
33 2009-11-24 DJ Delorie <dj@redhat.com>
36 * configure.ac: Add entry for Renesas RX.
37 * configure: Regenerate.
39 2009-11-22 Doug Evans <dje@sebabeach.org>
41 * cris/cpuall.h: Regenerate.
42 * cris/cpuv10.h: Regenerate.
43 * cris/cpuv32.h: Regenerate.
44 * cris/decodev10.c: Regenerate.
45 * cris/decodev10.h: Regenerate.
46 * cris/decodev32.c: Regenerate.
47 * cris/decodev32.h: Regenerate.
49 2009-11-12 Tristan Gingold <gingold@adacore.com>
51 * avr/interp.c (sim_write): Allow byte access.
54 2009-11-12 Tristan Gingold <gingold@adacore.com>
56 * avr/interp.c (sim_load): Clear memory before loading.
58 2009-11-09 Tristan Gingold <gingold@adacore.com>
60 * avr/interp.c (sim_resume): Fix typo for OP_ret.
62 2009-10-23 Doug Evans <dje@sebabeach.org>
64 * cris/arch.c: Regenerate.
65 * cris/arch.h: Regenerate.
66 * cris/cpuall.h: Regenerate.
67 * cris/cpuv10.c: Regenerate.
68 * cris/cpuv10.h: Regenerate.
69 * cris/cpuv32.c: Regenerate.
70 * cris/cpuv32.h: Regenerate.
71 * cris/cris-desc.c: Regenerate.
72 * cris/cris-desc.h: Regenerate.
73 * cris/cris-opc.h: Regenerate.
74 * cris/decodev10.c: Regenerate.
75 * cris/decodev10.h: Regenerate.
76 * cris/decodev32.c: Regenerate.
77 * cris/decodev32.h: Regenerate.
78 * cris/modelv10.c: Regenerate.
79 * cris/modelv32.c: Regenerate.
80 * cris/semcrisv10f-switch.c: Regenerate.
81 * cris/semcrisv32f-switch.c: Regenerate.
83 2009-10-22 Tristan Gingold <gingold@adacore.com>
85 * avr/interp.c (sim_stop): Return 1.
87 2009-10-16 Doug Evans <dje@sebabeach.org>
89 * MAINTAINERS: Add myself as m32r maintainer.
91 2009-10-15 Michael Egaer <eager@eagercon.com>
93 * MAINTAINERS: Add self as MicroBlaze maintainer.
95 2009-10-14 Ben Elliston <bje@gnu.org>
97 * MAINTAINERS (common): Move myself to "past maintainers" section.
99 2009-10-06 Michael Eager <eager@eagercon.com>
101 * microblaze/interp.c: Add include microblaze-dis.h.
103 2009-09-23 Michael Eager <eager@eagercon.com>
105 * configure: Add microblaze-*.* (not regenerated).
106 * configure.ac: Likewise.
107 * microblaze/config.in: New.
108 * microblaze/configure: Generate.
109 * microblaze/configure.ac: New.
110 * microblaze/interp.c: New.
111 * microblaze/Makefile.in: New.
112 * microblaze/microblaze.h: New.
113 * microblaze/microblaze.isa: New.
114 * microblaze/sim-main.h: New.
115 * microblaze/sysdep.h: New.
117 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
119 * avr/config.in: Regenerate.
120 * avr/configure: Likewise.
121 * configure: Likewise.
122 * cris/config.in: Likewise.
123 * cris/configure: Likewise.
125 * configure.ac: m4_include toplevel config/override.m4.
126 * configure: Regenerate.
127 * avr/configure: Regenerate.
128 * cris/configure: Regenerate.
130 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
132 * Makefile.in (datarootdir): New variable.
134 2009-05-18 Jon Beniston <jon@beniston.com>
136 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
137 * configure.ac: Add lm32 target.
138 * lm32: New directory.
140 2009-05-11 Andrew Cagney <cagney@gnu.org>
142 * MAINTAINERS: Orphan ppc.
144 2009-05-08 Kevin Buettner <kevinb@redhat.com>
146 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
147 m32c_signal_to_target. Change signal return values from SIGILL,
148 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
149 TARGET_SIGNAL_SEGV, etc. Fix all callers.
151 2009-04-30 Anthony Green <green@moxielogic.com>
153 * MAINTAINERS: Add myself for the moxie port.
154 * moxie: New directory.
155 * configure.ac: Add entry for moxie.
156 * configure: Regenerate.
158 2009-04-27 Tristan Gingold <gingold@adacore.com>
160 * avr: New directory.
161 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
162 * avr/config.in: New file, generated by autoheader.
163 * avr/configure: New file generated by autoconf.
164 * configure.ac: Add avr.
165 * configure: Regenerated.
167 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
169 * Makefile.in: Add dummy install-pdf, html, and
170 install-html targets.
172 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
174 * cris/sim-if.c: Include errno.h.
175 (cris_start_address, cris_program_offset): New variables.
176 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
178 (cris_options): New options --cris-program-offset and
179 --cris-start-address.
180 (cris_option_handler): Handle new options.
181 (cris_program_offset_write, cris_set_section_offset_iterator)
182 (cris_offset_sections, cris_offset_sections): New functions.
183 (sim_load): Use cris_program_offset_write as function argument to
184 cris_load_elf_file, not sim_write.
185 (struct offsetinfo): New struct.
186 (cris_handle_interpreter): Fix typo in comment.
187 (sim_open): Call cris_offset_sections as soon as the bfd of the
188 infile is available. Gate bfd validity checks on abfd non-NULL.
189 (sim_create_inferior): Let cris_start_address when != -1 override
190 other start-address choices.
192 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
194 * cris/traps.c (abort): Define to call sim_io_error.
195 (create_map): Make -1 imply a non-fixed address, not 0. All
196 callers changed. Only prefer the next higher unmapped address if
197 the last mapped address is no less than 0x40000000. Check that
198 the address to be mapped is not already mapped. Update head
200 (unmap_pages): Don't call abort when recursive call fails, just
201 note and return an error if a page in the range couldn't be unmapped.
202 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
203 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
204 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
205 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
206 don't abort on page not being mapped. Handle non-anon filemap
207 with length padded to pagesize.
209 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
211 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
212 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
213 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
214 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
215 (TARGET_AT_CLKTCK): Remove redundant macros.
216 (AUX_ENT): Adjust to use standard ELF AT_* macros.
217 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
219 (sim_open): Also pass AT_SECURE.
221 * cris/sim-main.h (struct _sim_cpu): New member
222 set_target_thread_data.
223 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
224 * cris/crisv10f.c: Ditto.
225 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
226 (MY (f_specific_init)): Set new _sim_cpu member to new function.
227 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
228 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
231 * cris/traps.c (TARGET_SYS_exit_group): Define.
232 (cris_break_13_handler): Handle it like the exit for the last
235 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
236 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
237 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
238 2.6.27. Set machine field to the BFD printable name of the
241 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
242 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
243 TARGET_MAP_DENYWRITE.
245 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
246 (TARGET_X_OK, TARGET_F_OK): Define.
247 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
249 * cris/semcrisv32f-switch.c: Regenerate.
251 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
253 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
254 just a short CRIS-specific notice. Tweak the wording for a
255 failing architecture test.
257 * cris/traps.c (TARGET_SYS_writev): New macro.
258 (is_mapped_only, cris_dump_map): New functions.
259 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
260 and prot combinations and a non-zero page-offset. If
261 TARGET_MAP_FIXED, unmap pages before mapping them.
262 <case TARGET_SYS_mprotect>: When checking, allow any length
263 argument. Don't actually do anything.
264 <case TARGET_SYS_writev>: New case.
266 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
267 * cris/sim-if.c: Include elf-bfd.h.
268 (struct progbounds): New members end_loadmem, start_nonloadmem.
269 (xprintf, eprintf): New functions, copied from common/sim-load.c.
270 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
271 (get_progbounds_iterator): Renamed from get_progbounds. Make
272 static. Update head comment. Set new struct progbounds members.
273 (exec_load_addr, interp_load_addr, interp_start_addr): New static
275 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
276 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
278 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
279 handling to use auxv_entries. Improve error message and checking
280 for invalid programs. Use new variable abfd for the program
281 instead of for each access reaching into sd to get it.
282 (sim_create_inferior): If non-zero, use interp_start_addr instead
283 of the program start address.
284 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
285 stale comment. Always specify little-endian.
287 2008-07-29 Nick Clifton <nickc@redhat.com>
289 * common/genmloop.sh: Add new parameter: -shell to specify the
290 command interpreter to use to run the input file. This is
291 necessary because otherwise SHELL is taken from the user's
292 environment, and not from the makefile that invoked this script
293 and the user might not be running an sh-like shell.
294 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
295 * fr30/Makefile.in: Likewise.
296 * frv/Makefile.in: Likewise.
297 * i960/Makefile.in: Likewise.
298 * iq2000/Makefile.in: Likewise.
299 * m32r/Makefile.in: Likewise.
301 * frv/mloop.in: Add missing start of line comment marker.
303 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
305 * cris/configure: Regenerate to track ../common/common.m4 changes.
306 * cris/config.in: Ditto.
308 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
309 Daniel Jacobowitz <dan@codesourcery.com>
310 Joseph Myers <joseph@codesourcery.com>
312 * cris/configure: Regenerate.
314 2008-05-09 Olivier Hainque <hainque@adacore.com>
316 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
318 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
320 * MAINTAINERS: Add myself as maintainer of cr16 port.
322 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
324 Add simulator for National cr16 processor.
325 * cr16: New directory.
326 * configure.ac: Add entry for National cr16.
327 * configure: Regenerate.
329 2008-02-05 DJ Delorie <dj@redhat.com>
331 * configure.ac (v850): V850 now has a testsuite.
332 * configure (v850): Likewise.
334 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
336 Updated copyright notices for most files.
338 2007-12-19 DJ Delorie <dj@redhat.com>
340 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
343 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
345 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
346 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
347 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
348 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
349 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
350 cris/semcrisv32f-switch.c: Regenerate.
352 2007-08-24 Joel Brobecker <brobecker@adacore.com>
354 Switch the license of all files explicitly copyright the FSF
357 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
359 * Makefile.in: Add dummy "pdf" target.
361 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
363 * cris/traps.c (dump_statistics): Change format for cycle numbers
364 to %llu and cast parameters to unsigned long long.
366 2007-02-16 Thiemo Seufer <ths@mips.com>
368 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
370 2007-01-28 Manuel Lauss <slauss@resi.at>
372 * configure.ac (sh64-*-*): Change to sh64*-*-*.
373 (sh-*-*): Change to sh*-*-*.
374 * configure: Regenerated.
376 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
378 Updated copyright notices for most files.
380 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
382 * Makefile.in (autoconf-common autoheader-common): Only run
383 autoheader on subdirs with a file config.in.
385 * configure.ac (common): Make the default "yes" for all targets
387 * configure: Regenerate.
389 * Makefile.in (autoconf-common autoheader-common): In documented
390 usage, say SHELL=/bin/sh.
391 (.PHONY): Add autoheader-common.
393 * MAINTAINERS: Add self as authorized committer for *.
395 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
396 Hans-Peter Nilsson <hp@axis.com>
398 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
399 (cris_unknown_syscall_action): Declare.
400 * cris/sim-if.c (cris_unknown_syscall_action): Define.
401 (cris_options): Add cris-unknown-syscall option.
402 (cris_option_handler): Correct comment about and error message for
403 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
404 * cris/traps.c: Include stdarg.h
405 (cris_unknown_syscall): New function.
406 (cris_break_13_handler): Instead of sim_io_eprintf and
407 sim_engine_halt, call cris_unknown_syscall to handle more or less
408 unknown syscalls. Adjust code as necessary to handle return
411 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
413 * MAINTAINERS: Add Dave Brolley for sh64.
415 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
417 * cris/traps.c (TARGET_PIPE_BUF): New macro.
418 (cris_pipe_empty): Correct initialization of "remaining". Only
419 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
422 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
424 * cris/configure.ac: Check for limits.h and sys/param.h.
425 * cris/configure, cris/config.in: Rebuild.
426 * cris/traps.c (SIM_PATHMAX): New macro.
427 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
429 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
431 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
432 * Makefile.in (FLAGS_TO_PASS): Include libdir.
433 * configure: Regenerated.
435 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
437 * cris/configure: Regenerated.
439 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
441 * cris/configure: Regenerated.
443 2006-05-05 Andreas Schwab <schwab@suse.de>
445 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
446 * configure: Regenerate.
448 * Makefile.in (CFLAGS_FOR_BUILD): Define.
449 (CC_FOR_BUILD): Don't override.
450 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
452 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
454 * MAINTAINERS: Add an "Authorized committers" section, and list
457 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
459 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
461 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
463 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
464 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
465 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
466 (all): Depend on rvdummy$(EXEEXT).
467 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
468 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
470 * cris/configure: Regenerate.
471 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
472 (enum cris_interrupt_type, crisv10deliver_interrupt)
473 (crisv32deliver_interrupt: New declarations.
474 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
475 sim_events_tickn and set state-events member work_pending when it's
476 time for the next event.
477 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
478 interrupt-delivery function.
479 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
480 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
481 * cris/devices.c: Include hw-device.h.
482 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
483 (device_io_write_buffer): Only perform 0x900000xx-functions if
484 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
485 call hw_io_write_buffer. Add return 0 last in function.
486 * cris/sim-if.c (cris_have_900000xxif): Now global.
487 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
488 Force "-model" option, effectively.
489 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
490 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
492 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
494 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
495 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
496 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
498 2006-03-13 DJ Delorie <dj@redhat.com>
500 * MAINTAINERS: Add self as m32c sim maintainer.
502 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
504 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
506 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
508 2006-01-23 Jim Blandy <jimb@redhat.com>
510 Add simulator for Renesas M32C and M16C.
512 * m32c: New directory.
513 * configure.ac: Add entry for Renesas M32C.
514 * configure: Regenerate.
516 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
518 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
519 cycle count for the current insn.
521 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
523 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
524 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
525 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
526 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
528 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
530 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
531 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
532 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
533 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
534 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
535 cris/semcrisv32f-switch.c: Regenerate.
537 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
539 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
540 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
542 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
543 F_GETFL on fd 0, 1 and 2.
545 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
547 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
548 last_open_fd, last_open_flags.
549 * cris/traps.c: Don't include targ-vals.h.
550 (TARGET_O_ACCMODE): Define.
551 (cris_break_13_handler): Set new _sim_cpu members.
552 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
553 Rearrange code as switch. Emit "unimplemented" abort for
554 unimplemented fcntl calls.
556 * cris/traps.c (TARGET_SYS_stat): Define.
557 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
558 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
560 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
562 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
563 low 32 bits are used after an unsigned long cast.
565 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
567 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
569 2005-05-26 Chris Demetriou <cgd@netbsd.org>
571 * MAINTAINERS: Update my mail address, move myself to the
572 "Past maintainers" section.
574 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
576 * configure.ac: Add igen to v850 build.
577 * configure: Regenerate.
579 2005-04-29 Paul Brook <paul@codesourcery.com>
581 * common/callback.c (PIPE_BUF): Provide default definition.
582 (os_lstat): Use stat if lstat is not available on the host.
583 (os_ftruncate): Return EINVAL if not available on the host.
584 (os_truncate): Ditto.
585 * common/configure.ac: Check for lstat, truncate and ftruncate.
586 * common/configure: Regenerate.
587 * common/config.in: Regenerate.
589 2005-04-27 Paul Brook <paul@codesourcery.com>
591 * common/Make-common.in: Add $(EXEEXT) to "run".
593 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
595 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
596 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
597 implemented. In call to create_map, pad length argument to 8k.
599 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
601 * configure.ac: Add explicit sh64 case.
602 * configure: Regenerate.
604 2005-03-30 Paul Brook <paul@codesourcery.com>
606 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
608 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
610 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
611 include cgen-ops.h in decodev10.c and decodev32.c.
612 * cris/sim-main.h: Don't include cgen-ops.h here.
613 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
614 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
615 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
616 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
617 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
618 cris/semcrisv32f-switch.c: Regenerate.
620 * cris/traps.c (cris_break_13_handler) <case
621 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
622 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
624 2005-03-23 Mark Kettenis <kettenis@gnu.org>
626 * cris/configure: Regenerate.
628 2005-02-28 Jim Blandy <jimb@redhat.com>
630 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
631 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
632 Regenerated, after change to common/aclocal.m4.
634 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
636 * iq2000: New target subdirectory.
637 * configure.ac: Add iq2000 target.
638 * configure: Regenerate.
640 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
642 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
643 (realclean, install): Fail if subdir make failed.
645 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
647 * cris: New directory, simulator for Axis Communications CRIS
648 including CRIS v32, CGEN-based.
649 * configure.ac: Add corresponding configury.
650 * configure: Regenerate.
652 2005-01-17 Andrew Cagney <cagney@gnu.org>
654 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
655 common directory. Remove sparc*-*-* from list.
657 2005-01-11 Andrew Cagney <cagney@gnu.org>
659 * Makefile.in (autoconf-common autoheader-common): Add --force to
660 autoconf and autoheader.
661 (autoconf-common autoheader-common)
662 (autoconf-install autoheader-install): Check for configure.ac, not
664 * configure.ac: Delete AC_CONFIG_AUX_DIR.
665 * configure: Re-generate.
667 2005-01-07 Andrew Cagney <cagney@gnu.org>
669 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
670 correctly calls AC_CONFIG_SUBDIRS.
671 * configure: Re-generate.
673 2004-12-01 Andrew Cagney <cagney@gnu.org>
675 * i960, h8500: Delete directory.
677 2004-11-12 Andrew Cagney <cagney@gnu.org>
679 * d30v, fr30, mn10200, z8k: Delete directory.
681 2004-03-10 Ben Elliston <bje@gnu.org>
683 * MAINTAINERS: Update my mail address.
685 2004-01-26 Chris Demetriou <cgd@broadcom.com>
687 * configure.in (mips*-*-*): Configure in testsuite.
688 * configure: Regenerate.
690 2003-10-08 Dave Brolley <brolley@redhat.com>
692 * configure.in: Move frv handling to alphabetically correct placement.
694 2003-09-03 Andreas Schwab <schwab@suse.de>
696 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
698 2003-08-29 Dave Brolley <brolley@redhat.com>
700 * MAINTAINERS: Add myself as maintainer of the FRV port.
702 2003-08-20 Michael Snyder <msnyder@redhat.com>
703 Dave Brolley <brolley@redhat.com>
705 * frv/: New directory, simulator for the Fujitsu FRV.
706 * configure.in: Add frv configury.
707 * configure: Regenerate.
709 2003-08-10 Ben Elliston <bje@wasabisystems.com>
711 * MAINTAINERS: Update my mail address.
713 2003-08-09 Andrew Cagney <cagney@redhat.com>
715 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
716 maintenance. List igen and sh maintainers. Mention that target
717 and global maintainers pick up the slack.
719 2003-07-09 Michael Snyder <msnyder@redhat.com>
721 * configure.in: Add testsuite to extra_subdirs for sh.
722 * configure: Regenerate.
724 2003-01-23 Nick Clifton <nickc@redhat.com>
728 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
730 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
732 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
734 * MAINTAINERS: Update my email address.
736 2002-07-17 Andrew Cagney <ac131313@redhat.com>
738 * w65/: Delete directory.
740 2002-07-16 Andrew Cagney <ac131313@redhat.com>
742 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
743 * configure: Re-generate.
745 2002-07-13 Andrew Cagney <ac131313@redhat.com>
747 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
748 * configure: Re-generate.
750 2002-06-16 Andrew Cagney <ac131313@redhat.com>
752 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
753 id, date and host to be overriden by NAME, ID, DATE and HOST
754 respectfully. Use ISO dates.
756 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
758 * Makefile.in (ChangeLog): New makefile variable.
759 * README-HACKING: Mention the ChangeLog makefile variable.
761 2002-06-01 Andrew Cagney <ac131313@redhat.com>
763 * tic80/: Delete directory.
765 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
767 * MAINTAINERS: Update my email address.
769 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
771 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
773 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
775 * MAINTAINERS: Record self as a co-maintainer of just common/.
777 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
779 * MAINTAINERS: Point to GDB files describing overall maintaince
780 and check-in procedures.
782 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
784 * MAINTAINERS: Add myself for ARM portions.
786 2001-10-19 Andrew Cagney <ac131313@redhat.com>
788 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
789 * configure: Re-generate.
791 2001-02-16 Ben Elliston <bje@redhat.com>
793 * MAINTAINERS: Add myself for common portions.
795 2001-01-15 Chris Demetriou <cgd@broadcom.com>
797 * MAINTAINERS: Added self and Andrew for the mips sim.
799 2000-10-25 Geoff Keating <geoffk@cygnus.com>
801 * MAINTAINERS: Added self and Andrew for the ppc sim.
803 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
805 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
806 * m68hc11: New directory.
808 * configure: Regenerate.
810 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
812 * tic80: New directory.
813 * configure.in: Add configury.
814 * configure: Regenerate.
816 2000-04-20 Nick Clifton <nickc@cygnus.com>
818 * configure.in (extra_subdirs): Add testsuite to strongarm
820 * configure: Regenerate.
822 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
824 * MAINTAINERS: New file. Blank.
826 1999-11-18 Ben Elliston <bje@cygnus.com>
828 * configure.in: Require autoconf 2.13 and remove obsolete
829 invocation of AC_C_CROSS.
830 * configure: Regenerate.
832 1999-09-29 Doug Evans <devans@casey.cygnus.com>
834 * configure.in: Configure the testsuite directory for thumb.
835 * configure: Regenerate.
837 1999-07-16 Ben Elliston <bje@cygnus.com>
839 * configure.in: Configure the testsuite directory for arm.
840 * configure: Regenerate.
842 1999-04-08 Nick Clifton <nickc@cygnus.com>
844 * configure.in: Add support for MCore target.
845 * configure: Regenerate.
847 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
849 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
850 RUNTEST instead of commenting out, fixes portability problem.
852 1999-02-08 Nick Clifton <nickc@cygnus.com>
854 * configure.in: Add support for StrongARM target.
855 * configure: Regenerate.
857 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
859 * configure.in: Require autoconf 2.12.1 or higher.
861 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
863 * configure.in (i960-*-*): Add.
864 * configure: Rebuild.
866 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
868 * configure.in: Added case for fr30-*-*.
869 * configure: Regenerated.
871 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
873 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
874 to allow successful operation on Windows.
876 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
878 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
879 check can be invoked recursively.
881 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
883 * configure.in: Build simulator on sparclite and sparc86x targets.
884 * configure: Regenerate.
886 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
888 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
889 to autoconf and autoheader.
891 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
893 * Makefile.in (autoconf-common autoheader-common): Pass `-l
894 ../common' to autoconf and autoheader. Unconditionally run
895 autoconf in every subdir.
896 (autoconf-changelog autoheader-changelog): Unconditionally run
897 commands in every subdir.
898 (autoconf-install autoheader-install): Likewise.
900 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
902 * Makefile.in: Get SHELL from configure.
903 * (FLAGS_TO_PASS): Pass down SHELL.
904 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
907 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
909 * configure.in (extra_subdirs): Enable igen for mn10300.
910 * configure: Re-generate.
912 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
914 * configure.in (extra_subdirs): Add support for thumb target.
916 * configure (extra_subdirs): Add support for thumb target.
918 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
920 * configure.in (extra_subdirs): Add IGEN directory when MIPS
922 * configure: Regenerate.
924 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
926 * configure.in (extra_subdirs): v850ea needs igen.
927 * configure: Re-generate.
929 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
931 * configure.in (testdir): When a testsuite directory, add that to
932 the list of confdirs.
934 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
936 * configure.in (extra_subdirs): Enable igen ready for V850.
938 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
940 * configure.in (w65-*-*, only_if_enabled): Set.
941 * configure: Re-generate.
943 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
945 * configure.in (sparc*-*-*, only_if_enabled): Set
946 only_if_enabled=yes. Check only_if_enabled before enabling a
948 * configure: Regenerate.
950 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
952 * configure.in (extra_subdirs): Add v850e target.
954 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
956 * configure.in (extra_subdirs): Add v850ea target.
958 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
960 * configure.in (sparc*-*-*): Don't build erc32.
961 * configure: Regenerate.
963 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
965 * configure.in (m32r-*-*): New target.
966 * configure: Regenerate.
968 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
970 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
972 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
973 thought that .NOEXPORT was the default target.
975 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
977 * Makefile.in (clean mostlyclean): Restore targets accidentally
978 deleted in earlier change.
980 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
982 * Makefile.in (autoheader-common, autoheader-changelog,
983 autoheader-install): Perform autoheader in addition to autoconf.
985 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
987 * Makefile.in (autoconf-install): New target.
988 (autoconf-changelog): Try different way to obtain user name.
990 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
992 * Makefile.in (autoconf-changelog): New target, update
993 ChangeLog for all subdirectories - normally used after
994 autoconf-common target.
996 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
998 * configure.in (extra_subdirs): Include testsuite for d30v.
999 * configure: Regenerate.
1001 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1003 (check): New rules - drive the testsuite.
1005 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1007 * configure.in: Add mn10200 configure lines accidentally
1009 * configure: Regenerated.
1011 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1013 * configure.in (extra_subdirs): Generalize common sub directory
1015 (extra_subdirs): For d30v add igen to the list to be built.
1017 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1019 * configure.in (d30v): New target.
1020 * configure: Regenerated.
1022 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1024 * configure.in: Don't require GCC to build the mn10200
1026 * configure: Rebuilt.
1028 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1030 * configure.in: Don't configure any subdirs if no simulator
1031 is being built. Don't use erc32 for sparc64.
1032 * configure: Regenerated.
1034 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1036 * Makefile.in (autoconf-common): New target.
1037 * configure.in: Do configure common.
1038 * configure: Regenerated.
1040 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1042 * configure configure.in: Don't configure common anymore. Files
1043 from common are now built in the individual simualtor directories.
1044 This fixes problems with the WinGDB build procedure.
1046 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1048 * configure: Enable the mn10200 simulator.
1050 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1052 * configure.in (configdirs): Add common.
1053 * configure: Regenerated.
1055 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1057 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1058 system V based targets.
1059 * configure: Regenerate.
1061 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1063 * configure.in (--enable-sim-powerpc): Delete.
1064 (--enable-sim): Add.
1065 * configure: Regenerated.
1067 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1069 * configure.in: Only build the V850 simulator if
1071 * configure: Rebuild.
1073 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1075 * configure.in: Do build erc32 for DOS and Windows hosts.
1076 * configure: Rebuild.
1078 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1080 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1081 be inherited from the parent. Remove INSTALL_XFORM and
1082 INSTALL_XFORM1. Make INSTALL be set from configure.
1084 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1086 * configure.in: Only build the MIPS simulator if we are using
1088 * configure: Rebuild.
1090 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1092 * configure.in (v850-*-*): Added V850 simulator.
1094 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1096 * configure.in (d10v-*-*): Added D10V simulator.
1098 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1100 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1101 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1103 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1104 (AC_PROG_INSTALL): Added.
1105 * configure: Rebuilt.
1107 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1109 * configure.in: Only configure erc32 if using gcc.
1110 * configure: Rebuild.
1112 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1114 * configure.in (sim_target): Build PowerPC simulator for powerpc
1115 System V.4, Solaris, and Elf targets.
1116 * configure: Regenerate with autoconf 2.10.
1118 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1120 * configure.in: Only built erc32 simulator on Unix hosts as it
1122 * configure: Regenerated with autoconf 2.8.
1124 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1126 * erc32: Sparc simulator from the ESA.
1128 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1130 From: Miles Bader <miles@gnu.ai.mit.edu>
1131 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1132 * configure: Regenerate using autoconf.
1134 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1136 * Makefile.in (install): Fix typo.
1138 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1140 * configure: Regenerate with autoconf 2.7.
1142 * Makefile.in (all): Simplify.
1143 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1144 as in the all target.
1145 (distclean, maintainer-clean, realclean): Likewise.
1146 (install): Likewise.
1148 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1150 * Makefile.in (all): Remove extra '\' char from shell script.
1152 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1154 * Makefile.in (all): Avoid a for loop with zero elements, even if
1155 the loop will not be executed because of an if statement.
1157 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1159 * Makefile.in (install): Add missing semicolon in "fi \".
1161 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1163 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1164 defaults from configure.
1166 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1168 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1169 if either --enable-sim-powerpc is used, or the host compiler is
1172 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1174 * configure.in (mips*-*-*): Added "mips" simulator target.
1175 * configure: Re-generated.
1177 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1179 * Makefile.in (BISON): Remove macro.
1180 (FLAGS_TO_PASS): Remove BISON.
1182 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1184 * configure.in: Explicitly `exit 0' for broken shells.
1185 * configure: Rebuilt.
1187 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1189 * common/run.c (main): Initialize the callbacks.
1191 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1193 * Makefile.in (maintainer-clean): New synonym for realclean.
1195 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1197 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1198 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1200 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1202 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1203 <cagney@highland.com.au>.
1204 * configure: Regnerate from configure.in.
1206 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1208 * Update all FSF addresses except those in COPYING* files.
1210 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1212 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1213 submakes either default or passed in value.
1215 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1217 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1218 install): Changed targets so that they descend all
1219 subdirectories in $(SUBDIRS).
1220 (*-all, *-clean, *-install): Removed targets.
1222 * configure.in: Don't bother with target makefile fragments, they
1223 are no longer needed.
1224 * configure: regenerated.
1226 * Makefile.in, configure.in: converted to autoconf.
1227 * configure: New file, generated with autconf 2.4.
1229 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1231 * Makefile.in: Support ARM.
1232 * configure.in: Ditto.
1234 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1236 * Makefile.in: Support W65.
1237 * configure.in: Ditto.
1239 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1241 * Makefile.in: Add TAGS target.
1243 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1245 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1246 install-h8300, clean-h8300, all-h8500, install-h8500,
1247 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1250 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1252 * Makefile.in: remove endian.h trace from h8500
1254 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1256 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1258 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1260 * Makefile.in: make all of the all-* target (except all-nothing)
1261 depend on endian.h, so that if we're not building a simulator, we
1264 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1266 * Makefile.in (check, installcheck): Added dummy targets.
1268 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1270 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1271 explicitly make it, since some makes apparently don't work with
1272 VPATH and .c to executable rules (SunOS make for example).
1274 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1276 * Makefile.in (endian): Add explicit rule for broken makes.
1278 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1280 * Makefile.in (info, install-info): New targets.
1281 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1284 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1286 * Makefile.in (endian.h): build endian.h via a temporary file so
1287 that we don't leave an incomplete file lying around on
1289 (clean): remove endian, e.h, and endian.h.
1291 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1293 * Makefile.in, configure.in: if target isn't supported, build a