[VM][WIP] Merging upstream 2022-04-09, excepts SMC777.

[csp-qt/common_source_project-fm7.git] / source / history.txt

4/9/2022

[COMMON] avoid C5208 and C26495 warnings on VC++2019 (thanks Mr.Meister)
[EMU/DEBUGGER] support mount and unmount image files

[PC8801MA] support changing access lamp of floppy drives
[SMC777/MEMORY] improve screen renderer for scrolling
[SMC777/MEMORY] improve joystick port not to keep trigger#2 pressed
[SMC777/MEMORY] improve for key releasingg

4/5/2022

[COMMON/FILEIO] improve functions for flush and wchar_t/char accessors
[EMU/DEBUGGER] support save_state and load_state
[EMU/WIN32] support changing access lamp of floppy drives
[WIN32/CONSOLE] support telnet client
[WIN32/SCREEN] fix to reinitialize Direct3D9 when device is lost

[VM/Z80DMA] support enable after reti command (thanks Mr.Sato)
[VM/Z80DMA] support interrupt on ready when WR3 is written (thanks Mr.Sato)

[FX9000P] support CASIO FX-9000P
[X1/DISPLAY] fix smooth vertical scroll
[X1TURBO/FLOPPY] improve motor on signal for spindle-up delay
[X1TURBO/FLOPPY] support changing access lamp of floppy drives


12/30/2021

[VM/DATAREC] support to enable/disable playing signal and voice separately
[VM/I386_NP21] fix DAA/DAS/AAA/AAS/AAM/AAD based on DOSBox
[VM/I386_NP21] fix SHLD/SHRD for n > 15 case
[VM/I386_NP21] fix FCOM/FCOMI/FXAM for NaN and INF cases
[VM/I386_NP21] fix FDECSTP/FINCSTP to clear C1 flag
[VM/I386_NP21] fix FLD to set/clear C1 flag when stack overflow occurs or not
[VM/I386_NP21] fix FSTENV/FLDENV/FSAVE/FLDENV to consider data16 prefix
[VM/Z80DMA] fix not to enter too long loop (thanks Mr.YAT)

[BX1] add keyboard and display artwork
[MZ80K/MEMORY] fix v-gate signal (thanks Mr.Hlide Fremen)
[MZ700/MEMORY] fix vblank signal timing (thanks Mr.Koucha-Youkan)
[PC6001] remove some codes from iP6 Plus (thanks Mr.tanam)
[PHC25/KEYBOARD] support _ and kana key
[PHC25/SYSTEM] support GM1 signal (thanks Mr.Moroboshi)


5/2/2021

[VM/DATAREC] fix mixing sound track
[VM/HD46505] support smooth vertical scroll
[VM/MC6843] fix seek command
[VM/MC6844] fix data chain register to consider 2/4 channel select bit
[VM/MC6844] fix to transfer 64K when byte count register is zero
[VM/Z80CTC] fix to apply written time constant just after reset bit is cleared

[BX1] fix memory map around ram
[BX1] support cartridge rom images
[BX1/DISPLAY] add missing font patterns
[BX1/FLOPPY] support i/o ports around fdc
[BX1/KEYBOARD] support PROG.SELECT switch
[BX1/PRINTER] support AUTO PRINT switch
[MZ1500/JOTSTICK] support joystick (thanks Mr.Koucha-Youkan)
[PC6001] remove some codes from iP6 Plus (thanks Mr.tanam)
[X1TURBO/DISPLAY] support smooth vertical scroll


2/7/2021

[WINMAIN] improve WM_KEYDOW/WM_KEYUP events for VK_PROCESSKEY case
[WIN32/CONSLE] improve routine to change console size

[VM/DISK] fix density flag when loading solid image with fm sectors
[VM/MC6843] fix track zero flag in STRA
[VM/MC6843] fix seek error flag in STRB
[VM/MC6843] fix seek command

[BX1/DISPLAY] improve for drawing digitron display
[BX1/KEYBOARD] improve I/O ports for detecting key pressed/released
[BX1/PRINTER] add ugly patch for printer process

1/24/2021

[VM/I8279] support 8279 (based on MAME)

[MP85] support MITEC MP-85


1/17/2021

[VM/UPD765A] improve for the case tc is asserted while reading/writing sector

[PC8801/PC88] improve to render screen with port params at end of disp timing
[X1TURBO/FLOPPY] fix to change type of all drives (thanks Mr.Sato)


1/3/2021

[WINMAIN] improve for pressing shift key and numpad key

[MZ80K] fix roman/kana conversion
[MZ80K/KEYBOARD] improve for pressing right shift key and numpad key


12/31/2020

[PC8801/PC88] improve crtc to refer reverse setting in start display command


12/21/2020

[VM/SCSI_CDROM] fix start frame of CD-DA playing when track number is specified

[PCENGINE/PCE] fix issue that ADPCM is mistakenly looped


12/19/2020

[VM/SCSI_CDROM] fix pre-gap of first track when it is audio track


12/18/2020

[VM/SCSI_CDROM] improve routine to get start/end frame of CD-DA playing

[PC8801/PC88] support 8inch DMA-type floppy drives for PC-8001mkII/SR
[PC9801/DISPLAY] improve EGC (thanks Mr.Ryuji Okamoto)


12/16/2020

[PC8801/DISKIO] improve to read/write files in initial current directory
[PC8801/PC88] support force ready/drq mask register for DMA-type FDD
[PC8801/PC88] fix PC-8001mkIISR hiragana font when PCG-8100 is enabled


12/15/2020

[PC8801/DISKIO] support M88 DiskDrv (thanks Mr.CISC and Mr.apaslothy)
[PC8801/PC88] support PC-8001mkIISR hiragana font
[PC8801/PC88] support to disable 5inch/8inch-FDD interfaces
[PC8801/PC88] support to disable updating scan line setting automatically
[PC8801/PC88] fix mouse data when position is not latched


12/14/2020

[PC8801/PC88] support 8inch DMA-type floppy drives


12/13/2020

[VM/MC6843] support MC6843 (based on MAME)
[[VM/SCSI_CDROM] fix to reset logical block size in Test Unit Ready command

[BX1] support CANON BX-1 (not work)
[MZ1500/QUICKDISK] improve for BSD record (thanks Mr.Motochan1500)
[PC8801/PC88] fix hireso graphic screen when scan line is disabled


12/12/2020

[PC8801/PC88] fix to clear attibutes at starting new frame
[PC8801/PC88] fix to read status of 2nd OPNA


12/11/2020

[PC8801/PC88] fix to run dma from memory to crtc when (rd,wr)=(0,0)
[PC8801/PC88] fix to run dma from scsi to memory only when count > 0


12/8/2020

[COMMON] fix build error on VC++2019 (thanks Mr.Sato)

[VM/Z80CTC] fix not to clear in-service at software reset (thanks Mr.Sato)
[VM/Z80DMA] fix stall cycles at BUSACK in byte mode (thanks Mr.Sato)

[X1TURBOZ/DISPLAY] fix zpalette in 64 colors, 2 screens mode (thanks Mr.Sato)


12/6/2020-2

[MZ1500] fix inp(0xe8) to detect voice board is missing (thanks Mr.kitahei88)
[X1TURBOZ/DISPLAY] fix to update zpalette at vline=0 (thanks Mr.Sato)


12/6/2020

[OSD/WIN32] import Unity plug-in code (thanks Mr.Marukun)

[VM/I386_NP21] update to Neko Project 21/W ver0.86 rev79 beta4
[VM/UPD765A] fix transfer size to 128 << min(N, 7) (thanks Mr.Kugimoto)

[MZ1500/QUICKDISK] improve for QDF format (thanks Mr.kitahei88)
[MZ1500/QUICKDISK] improve for BSD record (thanks Mr.Yuushi)
[PC9801/MEMORY] fix switching BIOS ROM/RAM
[X1/CZ8RB] support CZ-8RB (thanks Mr.Meister)


8/16/2020

[VM/SCSI_DEV] improve to specify data req signal delay (thanks Mr.Sato)
[VM/SCSI_DEV] fix read6/write6 command in 0 length case (thanks Mr.Sato)
[VM/SISI_HDD] change drive type to hot swappable
[VM/SISI_HDD] improve seek time (thanks Mr.Sato)
[VM/SASI_HDD] support winchester drive parameters command
[VM/Z80DMA] improve to sense rdy signal as level, not edge (thanks Mr.Sato)

[MZ2500/CRTC] fix sub plane address in 640x200 16colors mode (thanks Mr.856)
[SVI3X8] support SPECTRAVIDEO SVI-3x8 (thanks Mr.tanam)
[X1] add menu items for FD2/FD3 (thanks Mr.Sato)
[X1/DISPLAY] fix high speed pcg definition (thanks Mr.YAT)
[X1TURBOZ/DISPLAY] improve palette update timing (thanks Mr.Sato)


8/14/2020

[OSD/WIN32] support x64 build (thank Mr.Marukun)
[OSD/WIN32] support Direct2D

[MICOM_MAHJONG] support Nippon Mail Service MICOM MAHJONG (thanks Mr.GORRY)
[TVBOY] support GAKKEN TV BOY (thanks Mr.tanam)


4/6/2020

[VM/I386_NP21] update to Neko Project 21/W ver0.86 rev72


2/21/2020

[VM/I386_NP21] update to Neko Project 21/W ver0.86 rev71 beta4

[PC9801VX] support to switch cpu mode to V30
[PC9801RA] support to switch cpu mode to V30


2/17/2020

[EMU] add is_floppy_disk_connected() and is_quick_disk_connected()
[WINMAIN] disable floppy/quick disk drive menus when drives are disconnected

[VM/I8080] improve disassembler to distinguish 8080 and 8085
[VM/I86] split i86/i88/i186/v30 from I286 class
[VM/I86] fix aam in v30
[VM/I86] support 8080 emulation mode in V30
[VM/I386_NP21] improve not to explicitly accept irq while executing opecode
[VM/I386_DASM] split i386 disassembler from I286/I386 class
[VM/V30_DASM] split v30 disassembler from I286 class
[VM/V30_DASM] add 8080 disassebler for 8080 emulation mode
[VM/VM_TEMPLATE] add is_floppy_disk_connected() and is_quick_disk_connected()

[PC9801] support to enable/disable 1MB/640K/320KB-FDD interfaces


2/1/2020

[EMU] support to create blank hard disk image (*.hdi/*.nhd)
[WINMAIN] add menu items to mount blank hard disk image

[VM/DEVICE] improve memory/io bus interfaces for 16/32bit access
[VM/DEVICE] add get_event_clocks() and get_cpu_clocks()
[VM/EVENT] add get_event_clocks() and get_cpu_clocks()
[VM/I386_NP21] support 80386 (based on Neko Project 21/W i386 core)
[VM/I8259] make update_intr() public
[VM/MEMORY] improve memory bus interfaces for 16/32bit access
[VM/MEMORY] make rd_table/wr_table/addr_shift public
[VM/UPD7220] fix stop command (thanks Neko Project 21/W)

[FMR50] change i386 core from MAME to Neko Project 21/W
[FMR50] support to mount blank hard disk image
[MZ2500] support to mount blank hard disk image
[MZ2800] support to mount blank hard disk image
[PC9801] change i386 core from MAME to Neko Project 21/W
[PC9801] support to mount blank hard disk image
[PC9801/DISPLAY] improve code for big-endian host machine
[PC9801/FMSOUND] support 86-type PCM (thanks Neko Project 21/W)
[PC9801/MEMBUS] improve memory bus interfaces for 16/32bit access
[PC9801/MOUSE] fix irq number in hireso mode
[PC9801/SASI] improve irq/drq signals to generate from sasi bus signals
[X1TURBO] support to mount blank hard disk image
[X1TURBO/IOBUS] fix not to clear vram in reset()


1/23/2020

[VM/Z80DMA] fix byte counter read by read mask follows command (thanks Mr.Sato)


12/31/2019

[MZ2500/CRTC] apply crtc patch (thanks Mr.Koucha-Youkan)


11/3/2019

[PC98RL] fix horizontal frequency
[PC98RL/DISPLAY] fix not to change horizontal frequency
[PC98RL/DISPLAY] fix cg window
[PC98RL/DISPLAY] fix multiple vram planes accessing
[PC9801/DISPLAY] fix vram word accessing (thanks Mr.Artane.)


10/28/2019

[X1/PSUB] improve tape recording
[X1/SUB] improve tape stopping
[X1/SUB] improve tape write-protected signal


10/22/2019

[X1/PSUB] improve tape end signal
[X1/SUB] improve tape end signal


4/30/2019

[VM/DEVICE] add is_primary_cpu() and update_extra_event()
[VM/EVENT] support to udpate event while cpu is running one opecode
[VM/I8259] fix reading isr register (thanks Mr.rednow)
[VM/SCSI_HOST] fix to raise irq at command/message phase
[VM/Z80] improve to update event in every read/write cycle

[CEFUCOM21] support Hino Electronics CEFUCOM-21 (not work)
[MZ2500/CRTC] apply crtc patch (thanks Mr.Koucha-Youkan)
[PC8801MA] improve to enable/disable cmdsing and pcg
[PC8801MA] improve to enable/disable changing palette for each scan line


2/19/2019-2

[VM/DEVICE] revirt fixes in 2/19/2019
[VM/EVENT] revirt fixes in 2/19/2019
[VM/Z80] revirt fixes in 2/19/2019


2/19/2019

[VM/DEVICE] add is_primary_cpu() and update_extra_event()
[VM/EVENT] support to udpate event while cpu is running one opecode
[VM/Z80] improve to update event in every read/write cycle

[MZ2500/MEMORY] improve pcgram wait in display timing


2/16/2019

[EMU/DEBUGGER] improve to enumerate devices that is debugger available
[EMU/DEBUGGER] improve to show all breaked reasons
[EMU/DEBUGGER] support breakpoint of cpu selected by "! device" command
[EMU/*] simplify code for debugger
[VM/*] simplify code for debugger

[VM/I8237] support break point for direct memory access
[VM/MB8877] fix not to wait 60ms to start read/write after seek is finished
[VM/MC6844] support break point for direct memory access
[VM/TMS9918A] support break point for registers and vram access
[VM/UPD71071] support break point for direct memory access
[VM/Z80DMA] support break point for direct i/o and memory access


2/14/2019

[EMU/DEBUGGER] support break point for non-cpu device
[EMU/DEBUGGER] change command length from 64 to 1024

[VM/AY_3_891X] support break point
[VM/DEVICE] add get_debug_data_addr_space()
[VM/DEVICE] change type of get_debug_regs_info() from void to bool
[VM/MB8877] fix to decrease first seek time by 500us (2D/2DD) or 250us (2HD)
[VM/TMS9918A] support break point
[VM/YM2151] support break point
[VM/YM2203] support break point
[VM/Z80CTC] fix to reset interrupt req/in service by bit2 of control register
[VM/Z80DMA] fix to reset interrupt req/in service by reset command

[X1TURBO/EMM] support to access vram as memory space from debugger
[X1TURBO/IOBUS] support to access vram as memory space from debugger
[X1TURBO/IOBUS] support break point


2/9/2019

[EMU/DEBUGGER] enlarge text buffer size

[VM/DEVICE] add get_context_child() to enumerate daisy-chained devices
[VM/DISK] add get_sector_info()
[VM/MB8877] improve debugger to show current head position and disk geometry
[VM/MB8877] fix not to abort command when eject disk in unselected drive
[VM/UPD765A] improve debugger to show current head position and disk geometry
[VM/Z80*] add get_context_child() to enumerate daisy-chained devices

[X1TURBO] fix to force clear iei/oei of z80 family devices when reset vm
[X1TURBO/DISPLAY] fix to check bit0/2 of port 0x1fd0 in draw_text()


2/8/2019

[EMU/*] simplify code to draw screen while debugging cpu
[OSD/*] simplify code to draw screen while debugging cpu
[VM/*] simplify code to draw screen while debugging cpu

[BUBCOM80/DISPLAY] improve dmac
[HC80/IO] fix slave-cpu command 0x27 and 0x29 (thanks Mr.Stefano Bodrato)


2/7/2019

[EMU/DEBUGGER] improve to draw screen while debugging cpu
[EMU] add override/restore/run_wndproc() for debugger
[EMU] add create_bank_floppy_disk()
[OSD/WIN32] add override/restore/run_wndproc() for debugger

[VM/315_5124] improve draw_screen() for debugger
[VM/H6280] improve to run window procedure while suspending for debugger
[VM/I286] improve to run window procedure while suspending for debugger
[VM/I386] improve to run window procedure while suspending for debugger
[VM/I8080] improve to run window procedure while suspending for debugger
[VM/M6502] improve to run window procedure while suspending for debugger
[VM/MC6800] improve to run window procedure while suspending for debugger
[VM/MC6809] improve to run window procedure while suspending for debugger
[VM/MCS48] improve to run window procedure while suspending for debugger
[VM/TMS9918A] improve draw_screen() for debugger
[VM/TMS9995] improve to run window procedure while suspending for debugger
[VM/UPD7801] improve to run window procedure while suspending for debugger
[VM/UPD7810] improve to run window procedure while suspending for debugger
[VM/V9938] improve draw_screen() for debugger
[VM/V99X8] improve draw_screen() for debugger
[VM/Z80] improve to run window procedure while suspending for debugger

[BUBCOM80/DISPLAY] improve draw_screen() for debugger
[FAMILYBASIC/PPU] improve draw_screen() for debugger
[MZ80K/DISPLAY] improve draw_screen() for debugger
[MZ1500/MEMORY] improve draw_screen() for debugger
[PC8801/PC88] improve draw_screen() for debugger
[PCENGINE/PCE] improve draw_screen() for debugger
[SMC777/MEMORY] improve draw_screen() for debugger
[X1/DISPLAY] improve draw_screen() for debugger


1/29/2019

[MZ80K/MEMORY] support COLOR GAL 5 (thanks Mr.Suga)
[PC8001/PC88] fix issue that cursor is mistakenly hidden


1/18/2019

[PC8001/PC88] clear ram[0xff33] for DEMPA Galaxian
[SMC777/MEMORY] improve to render screen in each scan line


1/16/2019

[EMU] improve to reinitialize vm in reset when dipswitch is changed

[VM/UPD765A] fix st3 in sence devstat command to set two-side bit (temporary)

[PC8801] support GSX-8800
[PC8801] support to enable/disable PC-8801-11/GSX-8800/PCG-8100
[PC8801] fix some degradations


1/11/2019

[PC8001] support NEC PC-8001
[PC8001] support NEC PC-8001mkII
[PC8801] support NEC PC-8801
[PC8801] support NEC PC-8801mkII


12/28/2018

[EMU] support to insert blank 2D/2DD/2HD disk image


12/27/2018

[PC6001/PSUB] improve keyboard irq
[PC8801/PC88] improve initial memory map when CD BIOS is loaded
[PC8801/PC88] support CD-DA fade in/out


12/18/2018

[VM/I386] improve i386 core based on MAME 0.204
[VM/SCSI_CDROM] improve vendor specific command for NEC CD-ROM^2
[VM/SCSI_DEV] fix to write buffer when current command is not WRITE6/10/12
[VM/SCSI_DEV] fix Request Sense command to get correct data length
[VM/SCSI_HDD] fix not to write buffer when current command is not WRITE6/10/12

[PC8801/PC88] improve initial memory map when CD BIOS is loaded
[PC8801/PC88] revert screen renderer fixes in 12/1/2018 except scanline issues
[PC8801/PC88] fix dmac registers to clear higher 16bits of pair32_t
[PC8801/PC88] fix dmac to read i/o in verify mode


12/9/2018

[VM/SCSI_CDROM] add vendor specific command for NEC CD-ROM^2

[PC8801/PC88] support CD-ROM drive (thanks M88/cdif)
[PC8801/PC88] support Video Art Boad (thanks X88000)


12/5/2018

[VM/MB8877] improve reset() to finish previous command and reset fdc completely
[VM/Z80] add read_signal() to read irq status

[PC8801/PC88] improve to render scan line with black if color graphic mode
[SMC70/MEMORY] support 640x400 and 160x100 graphic mode
[SMC777/MEMORY] fix issue that text blink is not working
[SMC777/MEMORY] improve inport 21h to read vsync irq status
[SMC777/MEMORY] improve inport 51h to read cursor and space keys as joystick #1
[VM/*] improve tape interfaces for each virtual machine


12/4/2018

[CONFIG] remove fmgen_dll_path and add mame2151_dll_path/mame2608_dll_path

[VM/YM2203] remove HAS_YM2608 and YM2203_PORT_MODE to simplify code

[PC8801] support HMB-20 sound board


12/2/2018-2

[PC8801/PC88] fix text/graph renderer again (thanks Mr.Bookworm)


12/2/2018

[PC8801/PC88] fix not to apply reverse attribute to monochrome graphic screen


12/1/2018

[PC8801] enable/disable drawing scan line when monitor type is hireso/standard
[PC8801/PC88] improve text attributes/rederer (thanks ePC-8801MA改)
[PC8801/PC88] fix analog back color
[PC8801/PC88] improve routine to change palette for each scan line


11/28/2018

[WIN32/INPUT] support joystick with multiple axes and hat key
[WIN32/INPUT] improve joystick to keyboard function for numpad key 5


11/27/2018

[WIN32/INPUT] support joystick to keyboard function
[WIN32/SCREEN] support Window x1.5 mode

[PC8801/PC88] support PC key, that is mapped to F11


11/23/2018

[VM/I386] improve i386_limit_check to consider data size
[VM/SCSI_DEV] improve REQ timing just after ACK is raised

[PC6001/*] apply patch for timing issues (thanks Mr.Akikawa)
[PC8801/PC88] support to change palette for each scan line
[PC9801] support PC-9801-86 sound board for PC-9801RA and PC-98RL
[PC9801/FMSOUND] fix process_state


10/14/2018

[COMMON/FILEIO] improve functions to load/save state file for big-endian

[VM/*] improve process_state for big-endian


10/13/2018

[EMU/DEBUGGER] increase breakpoint number from 8 to 16

[VM/VM_TEMPLATE] fix issue that virtual machine is not correctly released


10/10/2018

[VM/SCSI_DEV] fix ack signal issue when multiple devices are attached
[VM/SCSI_HOST] support to output cd/io/msg/req signals to other devices

[MZ2800/SASI] support SASI I/F and HDD (thanks Mr.Oh!Ishi)


10/7/2018

[COMMON] add pair16_t and pair64_t (thanks Mr.Artane.)
[COMMON] rename pair_t to pair32_t
[COMMON] add functions for endians (thanks Mr.Artane.)
[EMU] fix roman/kana conversion when uppercase alphabet is input (thanks Mr.Artane.)
[EMU] abolish SUPPORT_VARIABLE_TIMING and USE_TAPE_BUTTON
[WINMAIN] abolish USE_ALT_F10_KEY
[WIN32/INPUT] abolish NOTIFY_KEY_DOWN and USE_SHIFT_NUMPAD_KEY
[WIN32/INPUT] improve key input for shift + numpad keys

[VM/*] introduce VM_TEMPLATE (thanks Mr.Artane.)


10/5/2018

[COMMON] combine load_state and save_statet of cur_time_t to process_state
[COMMON/FIFO] combine load_state and save_statet to process_state
[COMMON/FILEIO] add functions to load/save state file

[VM/*] combine load_state and save_statet to process_state
[VM/I386] fix to load/save vtlb state
[VM/I386] fix to rebuild tables when load state

[JX] support save/load state
[FM77AV] import Mr.Artane.'s fixes (Release in September 30, 2018)


9/30/2018

[COMMON/FILEIO] improve Fseek for compressed file by gzip
[EMU] improve to mount/unmount hard disk image in reset() if not hot swappable
[EMU/DEBUGGER] add commands for checkpoint
[EMU/DEBUGGER] improve to read/write files in initial current directory

[VM/DISK] improve for case 2D disk is inserted to 2DD drive (thanks Mr.Sato)
[VM/HARDDISK] support Virtual98 hdd image
[VM/HARDDISK] improve for solid image file
[VM/IO] improve debug log
[VM/MSM58321] fix pulse event (thanks Mr.Artane.)
[VM/SCSI_DEV] add is_hot_swappable
[VM/SCSI_HDD] improve to mount/unmount image in reset() if not hot swappable
[VM/SASI_HDD] support SASI hard disk drive
[VM/SN76489AN] fix save/load state function
[VM/UPD71071] fix verify command

[FM77L4] add eFM77L4 codes (thanks Mr.Artane.)
[MZ80A] improve to switch 2D/2DD drive type
[MZ80B] improve to switch 2D/2DD drive type
[MZ1500] improve to switch 2D/2DD drive type
[MZ2500] improve to switch 2D/2DD drive type
[MZ2800/FLOPPY] improve to switch 2D/2DD drive type
[MZ2800/SASI] support SASI I/F and HDD (partial)
[PC98XA] support NEC PC-98XA
[PC9801/MEMBUS] fix save/load state function
[X1TURBO/FLOPPY] improve to switch 2D/2DD drive type (thanks Mr.Sato)


5/24/2018

[COMMON] import Mr.Artane.'s fixes (Commits on May 10, 2018)
[COMMON/FIFO] import Mr.Artane.'s fixes (Commits on May 10, 2018)
[EMU] support set_vm_screen_lines() (thanks Mr.Artane.)
[EMU] fix interfaces for bubble cassette
[EMU] add interfaces for hard disk
[WINMAIN] add interfaces for hard disk

[VM/DEVICE] support read_debug_reg()
[VM/DISK] import Mr.Artane.'s fixes (Commits on May 10, 2018)
[VM/HARDDISK] support hard disk handler
[VM/I286] improve i286 core based on MAME 0.197
[VM/I286] support read_debug_reg()
[VM/I386] support read_debug_reg()
[VM/I8237] fix verify command
[VM/I8237] support to read bank register by read_signal()
[VM/MC6809] import Mr.Artane.'s fixes (Commits on May 10, 2018)
[VM/SCSI_DEV] support SASI specify command
[VM/SCSI_HDD] improve to use hard disk handler
[VM/SCSI_HOST] support to read ack signal

[BUBCOM80] support Systems Formulate BUBCOM80
[FM77AV] import Mr.Artane.'s fixes (Commits on May 10, 2018)
[FMR30] support to change hard disk image
[FMR50] support to change hard disk image
[FMR50/BIOS] improve to use hard disk handler
[MZ2500] support to select floppy drive type 2DD/2D
[MZ2500] support to change hard disk image
[MZ2500/MZ1E30] reimplent SASI I/F with general SCSI host/hard disk device
[PC9801/CPUREG] support NMI enable/disable
[PC9801/MEMBUS] improve for 24bit/32bit address
[PC9801/SASI] support SASI I/F and hard disk drives
[X1TURBO/SASI] support SASI I/F and hard disk drives


5/6/2018

[COMMON] add is_absolute_path() and create_absolute_path() functions
[COMMON/FILEIO] add Gzopen() function to read/write compressed file by gzip

[EMU] support to save/load compressed state file
[EMU/DEBUGGER] support to switch the target cpu/device

[VM/I386] improve i386 core based on MAME 0.197
[VM/MB8877] improve for debugger
[VM/TMS9918] improve for debugger
[VM/UPD765A] improve for debugger
[VM/UPD765A] fix read/write commands to check density (thanks PC8801MA改)
[VM/UPD765A] fix read diagnostics status for unformat/density mismatch case

[PC8801/PC88] fix underline/upperline attributes
[PC98XL] support NEC PC-98XL
[PC9801/MEMBUS] support NEC EMS
[PC9801/MEMBUS] support SASI/SCSI/IDE BIOS (only BIOS, not drives)
[X1/KEYBOAD] improve phantom keys (thanks Mr.Sato)


3/1/2018

[PC98RL] support NEC PC-98RL
[PC9801/DISPLAY] update for hireso mode
[PC9801/DISPLAY] fix for the case gdc scroll parameters are invalid
[PC9801/MEMBUS] update for hireso mode
[PC9801/MEMBUS] support outport 053Dh
[PC9801/MEMBUS] move memory map routine from VM class to MEMBUS class


2/28/2018

[VM/I286] fix not to clear cycles in reset()
[VM/I386] fix not to clear cycles in reset()
[VM/I386] improve mov_r16_rm16 instruction to check limit
[VM/I386] fix debugger

[PC9801RA] support NEC PC-9801RA


2/27/2018

[VM/I8237] fix bank register and inc mask register

[PC9801/DISPLAY] fix array length of analog palette
[PC9801/MEMBUS] improve memory bus for i386 or later (partial)


2/25/2018

[VM/DISK] improve for case 2D/2DD disk is inserted to 2DD/2D drive

[FMR30/FLOPPY] support to change drive type 2DD/2HD
[FMR30/FLOPPY] support to get media type 2D/2DD/2HD
[FMR50/BIOS] suppoert int 93h, ah=00h/01h to set/get drive type
[FMR50/BIOS] improve int 93h, ah=02h to get sector size and media type
[FMR50/FLOPPY] support to change drive type 2DD/2HD
[MZ80A] support to select floppy drive type 2D/2DD
[MZ80B] support to select floppy drive type 2D/2DD
[MZ80B] support to select cpu clock 4MHz/6MHz
[MZ800] support to select floppy drive type 2D/2DD
[MZ1500] support to select floppy drive type 2D/2DD
[MZ2200] support to select floppy drive type 2D/2DD
[MZ2200] support to select cpu clock 4MHz/6MHz
[MZ2800/FLOPPY] support to change drive type 2DD/2HD
[PC100] support to select floppy drive type 2D/2DD
[PC100/IOCTRL] improve dipswitch value for floppy drive type 2D/2DD
[X1TURBO] support to select floppy drive type 2D/2DD/2HD
[X1TURBO/FLOPPY] support to change drive type 2D/2DD/2HD


2/23/2018

[VM/DISK] support two side
[VM/I8237] support address mask
[VM/I8237] fix interface to connect tc signal for ch.2-4
[VM/IO] support to create multiple instances with different address range
[VM/MC6840] fix issue for the case address range is not 0-7
[VM/MEMORY] support to create multiple instances with different address ranges
[VM/UPD765A] fix st3 in sence devstat command

[FM16BETA] support FUJITSU FM16beta (not work)
[FMR50/MEMORY] fix memset issue
[PC9801] fix to connect terminal count signal from dmac to fdc


12/27/2017

[EMU] support to restore sound frequency/latency settings when load state

[VM/DISK] support T98-NEXT nfd r0 floppy disk image
[VM/DISK] support BKDSK hdm/hd5/hd4/hdb/dd9/dd6 floppy disk image


12/15/2017

[COMMON/FILEIO] add Fcompare function

[VM/*] improve save/load state function to check device class name
[VM/YM2151] fix save/load state function


12/14/2017

[RESOURCE] change accelerators for switching full speed and roman/kana input
[WINMAIN] fix to call ImmAssociateContext() in WM_ACTIVATE (thanks PC8801MA改)

[VM/HD46505] fix to force update event timing when R0-R9 are modified
[VM/HUC6280] support to show clocks since starting scanline in debugger
[VM/I286] support to show clocks since starting scanline in debugger
[VM/I386] support to show clocks since starting scanline in debugger
[VM/M6502] support to show clocks since starting scanline in debugger
[VM/MC6800] support to show clocks since starting scanline in debugger
[VM/MC6809] support to show clocks since starting scanline in debugger
[VM/MCS48] support to show clocks since starting scanline in debugger
[VM/TMS9995] support to show clocks since starting scanline in debugger
[VM/UPD7220] fix to force update event timing when sync are modified
[VM/UPD7801] support to show clocks since starting scanline in debugger
[VM/UPD7810] support to show clocks since starting scanline in debugger
[VM/Z80] support to show clocks since starting scanline in debugger

[X1TURBOZ/DISPLAY] fix pcg/analog palette access wait again (thanks Mr.Sato)


12/12/2017

[VM/DISK] fix crc in id/data field (thanks Mr.Sato)
[VM/HD46505] fix not to raise DISPTMG signal if bit2,3 of R8 are 11

[X1TURBOZ/DISPLAY] fix pcg/analog palette access wait (thanks Mr.Sato)
[X1TURBOZ/DISPLAY] fix to draw each line at start of hblank (thanks Mr.Sato)


12/3/2017

[VM/UPD765A] fix read diagnostic to set ND when 1st sector's id are not match


11/28/2017

[EMU/DEBUGGER] fix ut command to show correct range of cpu trace

[VM/DEVICE] rename bios_call_i86() to bios_call_far_i86()
[VM/HUC6280] support to show total cpu clocks in debugger
[VM/HUC6280] support cpu trace
[VM/I286] support to show total cpu clocks in debugger
[VM/I286] support cpu trace
[VM/I386] support to show total cpu clocks in debugger
[VM/I386] support cpu trace
[VM/M6502] support to show total cpu clocks in debugger
[VM/M6502] support cpu trace
[VM/MC6800] support to show total cpu clocks in debugger
[VM/MC6800] support cpu trace
[VM/MC6800] fix issue that can not break at instruction following tap/cli/sei
[VM/MC6809] support to show total cpu clocks in debugger
[VM/MC6809] support cpu trace
[VM/MCS48] fix to add clocks for interrupt to total cpu clocks
[VM/TMS9995] support to show total cpu clocks in debugger
[VM/TMS9995] support cpu trace
[VM/UPD7801] support to show total cpu clocks in debugger
[VM/UPD7801] support cpu trace
[VM/UPD7810] support to show total cpu clocks in debugger
[VM/UPD7810] support cpu trace
[VM/Z80] fix to add clocks for interrupt to total cpu clocks


11/26/2017

[PC8801MA] fix text attribute when dma underrun occurs


11/25/2017

[EMU/DEBUGGER] support command history
[EMU/DEBUGGER] support ut command (unassemble cpu trace)
[EMU/DEBUGGER] fix < command to check if command file is correctly opened

[EMU/OSD] fix initialize_screen_buffer() for RGB565 (thanks PC8801MA改)
[EMU/OSD] improve read_console_input() to get cursor key

[VM/MCS48] support to show total cpu clocks in debugger
[VM/MCS48] support cpu trace
[VM/UPD7220] improve vsync/hsync timing
[VM/UPD7220] improve status register to select vblank/hblank by sync command
[VM/YM2151] improve not to load mamefm.dll again (thanks PC8801MA改)
[VM/YM2203] improve not to load mamefm.dll again (thanks PC8801MA改)
[VM/Z80] support to show total cpu clocks in debugger
[VM/Z80] support cpu trace

[PC8801MA] support OPN+OPN, OPNA+OPNA, and OPNA+OPN (thanks PC8801MA改)
[PC8801MA] fix back space key issue (thanks PC8801MA改)
[PC8801MA] fix bank switch of extrom (thanks PC8801MA改)
[PC8801MA] fix not to apply digital palette in monochrome and digital mode
[PC8801MA] fix to apply analog palette in monochrome and analog mode
[PC8801MA] fix to apply reverse in text attribute to monochrome graphic
[PC8801MA] fix cpu mode "Z80 8MHz (FE2/MC)"

[X1/KEYBOAD] support phantom keys (thanks Mr.Sato)
[X1/SUB] fix not to check iei status when sub cpu sends ack (thanks Mr.Sato)


8/12/2017

[EMU/DEBUGGER] improve to show message when cpu is not suspended soon

[PC8801/PC88] fix to render text color #0 with back color
[PC8801/PC88] fix to get text color attribute when text display is stopped


8/10/2017

[EMU] support to enter 0-9 by numpad key while roman to kana is enabled
[EMU] support to enter shift + function key while roman to kana is enabled
[EMU/DEBUGGER] fix to wait until cpu is suspended and enters into waiting loop

[VM/I386] fix to flush vtlb after modifying address mask
[VM/UPD7220] support to specify device class to access vram
[VM/Z80] fix to run dma before checking interrupts

[PC8801/PC88] fix monocolor graph screen to get color index from text attribute
[PC8801/PC88] fix monocolor graph screen to render with graph palette

[PC9801VX] support NEC PC-9801VX
[PC9801/CPUREG] support address mask i/o
[PC9801/DISPLAY] support EGC (thanks Neko Project 2)
[PC9801/DISPLAY] support EGC/GRCG access from graphic GDC
[PC9801/MEMBUS] support 24bit/32bit address memory bus
[PC9801/MEMBUS] support ITF rom


6/22/2017

[EMU] move auto key codes from winmain to emu class
[EMU] support to convert roman letters to kana letters
[WINMAIN] support APPLICATION accelerator to enable/disable roman to kana
[WINMAIN] support CTRL+ALT+ENTER accelerator to enable/disable full speed

[VM/I386] improve i86/i286 core based on MAME 0.185
[VM/UPD765A] fix device status (thanks annonymus guy)
[VM/YM2203] fix to mask YM2608 ports in YM2203 case (thanks annonymus guy)

[PC8801/PC88] fix bank switch of extend ram (thanks annonymus guy)
[PC8801/PC88] fix crtc for dma underrun case (thanks annonymus guy)


5/28/2017

[WINMAIN] support to run simulation at full speed

[VM/I386] improve i386 core based on MAME 0.185


5/20/2017

[YIS/DISPLAY] support correct font rom (thanks Mr.Moriya)
[YIS/DISPLAY] support native graphic commands
[YIS/DISPLAY] include KST32B stroke font and its decoder (thanks Mr.Saka.N)

[X1TURBOZ/DISPLAY] fix 8 color mode with 4096 palette (thanks Mr.Sato)


5/17/2017

[X1TURBOZ/DISPLAY] fix 64/4096 color mode (thanks Mr.Sato)


5/15/2017

[X1TURBOZ] support SHARP X1turboZ
[X1TURBOZ/DISPLAY] support X1turboZ enhanced graphic modes
[X1TURBOZ/IOSUB] support analog palette access wait


5/13/2017

[WIN32/SCREEN] fix not to move window position unnecessarily

[VM/AM9511] support AM9511 (thanks Xep128)
[VM/DISK] support to specify raw track size
[VM/MB8877] support to specify raw track size
[VM/MC6844] support MC6844
[VM/MC6850] support MC6850
[VM/MSM58321] add read_signal()
[VM/MEMORY] improve that dma controller does not read/write memory mapped i/o
[VM/NOISE] fix not to restart from first sample if already playing noise

[YIS] support YAMAHA YIS (thanks YAMAHA and Mr.Moriya)


4/16/2017

[VM/IO] revert the fix in 4/15/2017
[VM/SN76489AN] revert the fix in 4/15/2017


4/15/2017

[COMMON] add muldiv_s32 and muldiv_u32 to multiple 32bit integer
[COMMON] fix functions to support symbols

[VM/IO] improve to use read/write_io8/16/32w() to get wait clock from device
[VM/SN76489AN] improve to return 32 + 16 * n for wait clock

[MZ700] improve correct cpu clock and frame rate
[MZ800] improve correct cpu clock and frame rate


4/2/2017

[RESOURCE] improve menu items
[WINMAIN] improve menu items

[EX80] support to show/hide crt monitor


3/30/2017

[COMMON] add functions to convert char, wchar_t, and _TCHAR to each other
[COMMON] add _fgetts, _ftprintf, my_ftprintf_s, and my_swprintf_s
[COMMON/FILEIO] add Fgetts and Ftprintf for _TCHAR
[COMMON/FILEIO] fix functions using ZLIB for _UNICODE case
[EMU/DEBUGGER] fix for _UNICODE case
[WINMAIN] improve to update status only when status is changed

[VM/HUC6280] improve disassembler to support symbols (thanks Mr.Kei Moroboshi)
[VM/I8080] improve disassembler to support symbols
[VM/M6502] support debugger and disassembler (thanks MAME)
[VM/MCS48] improve disassembler to support symbols
[VM/TMS9995] fix disassembler for _UNICODE case
[VM/UPD7810] improve disassembler to support symbols
[VM/UPD7810] fix disassembler for _UNICODE case

[BABBAGE2ND] support debugger and save/load state
[FAMILYBASIC] support debugger
[YS6464A] support debugger and save/load state


3/28/2017

[COMMON] add _tcscat and my_tcscat_s
[COMMON] add structure and functions to support symbols
[EMU/DEBUGGER] improve debugger to support symbols (thanks Mr.Kei Moroboshi)

[VM/MC6800] improve disassembler to support symbols (thanks Mr.Kei Moroboshi)
[VM/MC6809] improve disassembler to support symbols (thanks Mr.Kei Moroboshi)
[VM/TMS9995] improve disassembler to support symbols (thanks Mr.Kei Moroboshi)
[VM/UPD7801] improve disassembler to support symbols (thanks Mr.Kei Moroboshi)
[VM/Z80] improve disassembler to support symbols (thanks Mr.Kei Moroboshi)


3/26/2017

[VM/YM2413] support mute

[FAMILYBASIC] support Family BASIC MMC5/VRC7 MOD
[FAMILYBASIC] support correct scanlines
[FAMILYBASIC/MEMORY] support MMC5/ VRC7 based on unofficial nester
[FAMILYBASIC/MEMORY] fix data recorder signal (thanks MESS)


3/20/2017

[COMMON] suport to read ascii/binary file compressed by gzip
[RESOURCE] fix fm8/fm7/fm77 dipswitch menu items
[WINMAIN] fix to update status bar twice/second to supress flickar

[VM/SCSI_CDROM] support CD-ROM bin/img file compressed by gzip
[VM/DATAREC] support tape image file compressed by gzip
[VM/DATAREC] support to save FUJITSU FM-7/77 t77 format tape image

[BMJR/MEMORY] fix sound mixer not to clear previously mixed sound


3/18/2017

[WINMAIN] support multiple data recorder
[EMU] support multiple data recorder

[VM/DATAREC] support HITACH BASIC Master Jr bin format tape image
[VM/PTF20] support access lamp signal

[BMJR/MEMORY] fix reading cmt signal
[BMJR/MEMORY] fix sound mixer
[TK80BS/CMT] support TK-80 cmt i/f


3/15/2017

[WINMAIN] add status bar to draw access lamps
[EMU] add interfaces to get access status of floppy/quick/hard disk drives
[EMU] add interface to get cmt status message

[VM/DATAREC] support cmt status message
[VM/HD44102] fix build error
[VM/MC6800] fix M_RDOP and M_RDOP_ARG macros (thanks PockEmul)
[VM/LD700] support access lamp signal
[VM/SCSI_CDROM] support access lamp signal
[VM/SCSI_DEV] support access lamp signal
[VM/SCSI_HDD] support access lamp signal

[HC20] fix issue that we cannot debug TF-20 CPU
[JR800] support National JR-800 (thanks PockEmul)


3/12/2017

[VM/DATAREC] fix issue that fast forward noise may not stop


3/11/2017

[VM/DATAREC] support to play play/stop/fast-fwd noise
[VM/MB8877] support to play seek/load/unload noise
[VM/HD44102] support HD44102 based on MAME 0.171
[VM/T3444A] support to play seek/load/unload noise
[VM/UPD765A] support to play seek/load/unload noise
[VM/UPD765A] fix seek time (thanks Mr.Artane.)

[MZ80B/MEMORY80B] fix vgate signal (thanks Mr.Suga)


3/8/2017

[VM/DISK] improve to check if disk image is modified more strictly
[VM/DISK] import yaya2016-04-13plus1 (thanks Mr.umaiboux)
[VM/V9938] import yaya2016-04-13plus1 (thanks Mr.umaiboux and MAME)
[VM/YM2413] import yaya2016-04-13plus1 (thanks Mr.umaiboux)

[FMR30] split project for i86 and i286
[MSX/*] import yaya2016-04-13plus1 (thanks Mr.umaiboux)


3/7/2017

[WIN32/INPUT] improve to accept shift + caps/kana/kanji

[VM/DISK] support device name (thanks Mr.Aratane.)
[VM/EVENT] improve to check abnormal scanline number (thanks Mr.Sato)
[VM/EVENT] fix light weight sound rendering (thanks Mr.168)
[VM/*] add device name to all devices of each machine (thanks Mr.Aratane.)

[MZ80B] change floppy drive type from 2D to 2DD (thanks Mr.Suga)
[MZ80B/MEMORY80B] support I-O DATA PIO-3039 (thanks Mr.Suga)


3/4/2017

[WINMAIN] add interfaces for bubble casette (thanks Mr.Artane.)
[EMU] add interfaces for bubble casette (thanks Mr.Artane.)

[VM/*] import Mr.Artane.'s fixes (Commits on Feb 18, 2017)
[VM/AY_3_891X] split YM2203 and AY-3-891X (thanks Mr.Artane.)
[VM/DISK] fix trim buffer routine for 2D disk image (thanks Mr.Artane.)
[VM/EVENT] support light weight sound rendering (thanks Mr.Artane.)
[VM/MB8877] fix seek command for 2D disk image (thanks Mr.Artane.)

[FM77AV] import Mr.Artane.'s fixes (Commits on Feb 18, 2017)


3/1/2017

[EMU/DEBUGGER] support < command (input commands from file)

[X1/MEMORY] support to unmap rom by reading port 1Exxh (thanks Mr.Sato)


2/9/2017

[WINMAIN] support to draw bitmap image onto buttons
[WINMAIN] fix to redraw pcb bitmap image when window is invalidated
[WIN32/SCREEN] fix to invalidate rects for 7-seg leds and buttons

[BABBAGE2ND] add bitmap images for buttons
[EX80] add bitmap images for buttons
[SMB80TE] add bitmap images for buttons
[TK80BS] add bitmap images for buttons
[TK85] support NEC TK-85
[YS6464A] add bitmap images for buttons


12/31/2016

[COLECOVISION/KEYBOARD] fix not to raise irq when joystick is pressed
[COLECOVISION/KEYBOARD] fix joystick/tenkey inputs
[COLECOVISION/KEYBOARD] fix to save/load tenky enabled status
[SC3000/MEMORY] support 32KB+16KB or 128KB ROM carts


12/30/2016

[COLECOVISION] support COLECO ColecoVision (thanks Mr.tanam)


12/29/2016

[RESOURCE] recompress png files in https://tinypng.com/

[EMU/DEBUGGER] support p command (trace one opcode, step-over)

[MZ80K/MEMORY] support V-GATE signal (thanks Mr.Suga)
[PASOPIA/DISPLAY] fix graphic color in screen 2 mode (thanks Mr.Kamei)
[SMB80TE] support SHARP SM-B-80TE


4/13/2016

[WINMAIN] improve auto key for the case to switch upper/lowercase with capslock
[EMU/DEBUGGER] fix issue that u command may cause the infinite loop

[VM/DATAREC] support to detect the frequency of signal
[VM/DATAREC] fix to always adjust zero position of wave signal
[VM/UPD1990A] fix not to check clk signal is low when stb signal is raised
[VM/UPD7810] support debugger
[VM/UPD7810] support MOV A,S opecode
[VM/UPD7810] fix not to change V register (thanks PockEmul)

[PC2001] support NEC PC-2001
[PC2001] fix cpu clock
[PC2001] support beep sound
[PC2001/IO] support rtc control signals
[YALKY] support Yuasa Kyouiku System YALKY
[YALKY/IO] improve data recorder controller


4/1/2016

[VM/DATAREC] suppot to specify channel of data and voice for each vm
[VM/UPD7810] support uPD7810 series based on MAME 0.152
[VM/UPD16434] support uPD16434 based on PockEmul

[PC2001] support NEC PC-2001 (not work)
[SMC70] support SONY SMC-70
[YALKY] support Yuasa Kyouiku System YALKY (not work)


3/23/2016

[VM/FMGEN] fix psg volume (thanks Mr.umaiboux and Mr.Artane.)
[VM/MZ1P17] support MZ-80P3 and MZ-80P4 (thanks Mr.Suga)
[VM/UPD7801] support HOLD/HLDA signals at PC #7/#6 pins

[FM77AV] import Mr.Artane.'s fixes (Commits on Mar 20, 2016)
[MZ80K] support dummy printer device and MZ-80P3 / MZ-80P4 (thanks Mr.Suga)
[MZ80K/KEYBOARD] fix shift and kana keys
[MZ2800] fix issue that prnfile instance is not initialized


3/17/2016

[ALL] improve VC++2013 project files for include/lib directories and manifest

[COMMON] import Mr.Artane.'s fixes (Commits on Mar 11, 2016)
[EMU] import Mr.Artane.'s fixes (Commits on Mar 11, 2016)
[EMU] add get_sound_rate()

[VM/SCSI_CDROM] improve CD-DA mixer to reduce cpu usage

[PCENGINE/PCE] fix adpcm streaming with dma function for Ys III


3/16/2016

[VM/HUC6280] support busreq
[VM/MSM5205] support MSM5205 based on MAME 0.171
[VM/SCSI_CDROM] support SCSI CD-ROM drive
[VM/SCSI_CDROM] support NEC features based on MAME 0.171 and Ootake 2.76
[VM/SCSI_DEV] support more correct req timing
[VM/SCSI_DEV] simplify codes
[VM/SCSI_HDD] fix save/load state function to call SCSI_DEV's ones
[VM/SCSI_HDD] simplify codes
[VM/SCSI_HOST] suuport output bsy signal to notify bus free

[PCENGINE] support CD-ROM^2 based on MAME 0.171 and Ootake 2.76
[PCENGINE] change icon file


3/5/2016

[EMU] add force_out_debug_log() function

[VM/DEVICE] add definitions for SCSI signals
[VM/I8237] suuport output signal to notify terminal count
[VM/MB8877] support MB89311
[VM/SCSI_HOST] support SCSI base host adaptor
[VM/SCSI_DEV] support SCSI base device
[VM/SCSI_HDD] support SCSI hard disk drive
[VM/UPD71071] fix to clear registers at initialize() for debug mode
[VM/UPD71071] fix initial mode and mask registers values in reset()

[FMR30] fix not to use pseudo bios class when ipl rom image is loaded
[FMR30/SCSI] support SCSI host adaptor
[FMR50] fix not to use pseudo bios class when ipl rom image is loaded
[FMR50/BIOS] remove codes for unused memory card and power management bios
[FMR50/SCSI] support SCSI host adaptor


3/1/2016

[ALL] use integer types defined in stdint.h (uint8 -> uint8_t, etc)
[ALL] rename pair and scrntype to pair_t and scrntype_t

[COMMON] add get_long_full_path_name() and get_parent_dir()
[COMMON] rename IsFileExists() in FILEIO class to IsFileExisting()
[EMU] import Mr.Artane.'s fixes (Commits on Feb 27, 2016)
[EMU] add get_osd()
[EMU] add set_mouse_pointer(), set_mouse_button(), and get_mouse_button()
[EMU] add get_access_lamp_status() and get_led_status()
[EMU/DEBUGGER] avoid PostMessage() and GetAsyncKeyState()
[WIN32/CONSOLE] add is_console_key_pressed() and close_debugger_console()

[VM/DATAREC] fix t77 image loader (thanks Mr.Artane.)
[VM/DEVICE] add get_device_name() (thanks Mr.Artane.)
[VM/DISK] import Mr.Artane.'s fixes for eFM7/77/77AV hacks
[VM/MB8877] import Mr.Artane.'s fixes for eFM7/77/77AV hacks
[VM/MC6809] add 16/32bit read/write functions for debugger (thanks Mr.Artane.)
[VM/V99X8] fix macro to create color (thanks Mr.Artane.)
[VM/Z80DMA] fix build issue for MinGW's (older) GCC (thanks Mr.Artane.)

[FM77AV] import Mr.Artane.'s fixes (Commits on Feb 27, 2016)
[FM77AV] add eFM8 codes (thanks Mr.Artane.)
[J3100] fix build issues (thanks Mr.Artane.)


2/26/2016

[WINMAIN] refactor codes
[WIN32] fix routine to check the Windows Vista or later
[WIN32/INPUT] improve DirectInput codes for newer DirectX 9.0 SDK
[WIN32/VIDEO] improve routine to copy DirectShow buffer to vm screen buffer

[VM/HD46505] support to set character clock
[VM/MC6840] reimplement based on MAME 0.168
[VM/T3444A] fix build error
[VM/YM2203] fix to clear output register and mode register in reset()


2/21/2016

[VM/MB8877] fix timing to start read/write sector for invalid format track
[VM/T3444A] fix timing to start read/write sector for invalid format track

[MZ2500/CMT] fix reset signal again for Laydock


2/19/2016

[ALL] add VC++2013 project files
[ALL] change many public method names according to common naming convention

[COMMON] add create_string() function
[WINMAIN] copy codes to read clipboard for auto key from osd class
[EMU] copy codes for auto key and joystick mapping from osd class
[EMU/OSD] remove codes for auto key and joystick mapping

[VM/PRNFILE] fix not to register ack event in initialize() for debug build
[VM/MZ1P17] fix not to register ack event in initialize() for debug build
[VM/MZ1P17] fix font rom loader for MZ-80B/2000/2200

[MZ2200/MEMORY80B] fix green monitor color


2/17/2016

[EMU] improve screen stretch modes
[EMU/OSD] improve screen stretch modes

[VM/FMGEN] support to set left/right volumes
[VM/YM2151] support to set left/right volumes
[VM/YM2203] support to set left/right volumes
[VM/Z80DMA] fix timing of bus request and release

[MZ2200/MEMORY80B] fix green monitor not to refer text/back color registers
[MZ2200/MEMORY80B] support to swap left/right side of color and green monitors


2/13/2016

[VM/DISK] fix routine to calculate sector position for invalid format track
[VM/DISK] increase max sector number from 256 to 512
[VM/MB8877] improve timing to start read/write sector for invalid format track
[VM/MZ1P17] fix initial value of reset signal
[VM/PRNFILE] fix initial value of reset signal
[VM/T3444A] improve timing to start read/write sector for invalid format track

[MZ2200/MEMORY80B] support dual (color and green) monitors


2/11/2016

[VM/DISK] fix to allow fdc class to get gap3 size
[VM/MB8877] improve timing to start read/write sector
[VM/T3444A] improve timing to start read/write sector
[VM/T3444A] fix to wait 100usec for tnd signal after sector is finshed


2/10/2016

[COMMON] improve routine to apply volume to sound samples
[WINMAIN] improve volume dialog
[WINMAIN] change volume uppder limit from +20dB to 0dB
[WINMAIN] support joystick dialog
[WINMAIN] simplify codes
[EMU] remove function to get sound device info
[EMU] change keyboard/joystick/mapper data pointer to const pointer

[MZ80K/KEYBOARD] fix for constant keyboatd data pointer
[PC6001/PSUB] fix for constant keyboatd data pointer
[X1/KEYBOARD] fix for constant keyboatd data pointer


2/7/2016

[WINMAIN] add dialog to set sound device volumes
[EMU] support to get sound device info
[EMU] support to set left/right volumes

[VM/BEEP] support to set left/right volumes
[VM/DATAREC] support to set left/right volumes
[VM/DEVICE] add virtual function to set left/right volumes
[VM/LD700] support to set left/right volumes
[VM/PCM1BIT] support to set left/right volumes
[VM/SN76489AN] support to set left/right volumes
[VM/TMS3631] support to set left/right volumes
[VM/UPD7552] support to set left/right volumes
[VM/YM2151] support to set volume
[VM/YM2203] support to set volume
[VM/YM2413] support to set left/right volumes
[VM/YM2413] fix memory leak issue

[BMJR/MEMORY] support to set left/right volumes
[FAMILYBASIC/APU] support to set left/right volumes
[MULTI8] support beep sound
[PV1000/PSG] support to set left/right volumes
[SCV/SOUND] support to set left/right volumes


2/4/2016

[VM/TMS9995] support debugger


1/10/2016

[VM/MZ1P17] support ESC % 2 in MZ-1 mode
[VM/MZ1P17] support MZ-2/3/X1 mode
[VM/MZ1P17] improve hiragana mode
[VM/MZ1P17] support overprint in the case that line feed distance is not enough
[VM/MZ1P17] improve busy signal
[VM/MZ1P17] support ack and reset signal
[VM/PRNFILE] improve busy signal
[VM/PRNFILE] support ack and reset signal

[MZ1500] support dummy printer device and MZ-1P17
[MZ2200/PRINTER] support dummy printer device and MZ-1P17
[MZ2500/PRINTER] improve to use printer reset signal
[MZ2800/PRINTER] support dummy printer device and MZ-1P17
[MZ3500] support dummy printer device and MZ-1P17
[MZ5500] support dummy printer device and MZ-1P17
[PC8801/PC88] fix to get printer busy status
[PC9801] fix to get printer busy status
[PC98LT] fix to get printer busy status
[X1] support dummy printer device and MZ-1P17


12/31/2015

[VM/MZ1P17] support underline, hiragana mode, and color mode


12/30/2015

[COMMON] add jis_to_sjis() function
[EMU] fix to delete OSD instance after delete VM instance
[EMU/OSD] improve functions to manipulate bitmaps and fonts

[VM/PRNFILE] support save/load state
[VM/MZ1P17] support MZ-1P17

[MZ2500/PRINTER] support dummy printer device and MZ-1P17


12/23/2015

[ALL] fix for UNICODE character set case

[COMMON] improve create_local_path() and get_file_path_without_extensiton() not to overwrite previous result soon
[EMU/OSD] improve to capture screen with png file format
[EMU/OSD] improve functions to manipulate bitmaps and fonts

[TOOL/MZ80K] support software keyboard for MZ-80K/C


12/20/2015

[EMU/OSD] remove functions for pinter interface
[EMU/OSD] add functions to manipulate bitmaps and fonts

[VM/PRNFILE] support dummy printer device that outputs to file

[MZ80K/MEMORY] combine memory class and display class
[MZ80K/MEMORY] support PCG-8000/1200
[MZ700/MEMORY] fix PCG-700
[PC6001] improve to use new dummy printer device
[PC8801] improve to use new dummy printer device
[PC9801] improve to use new dummy printer device
[PC98LT] improve to use new dummy printer device
[X1] improve to use new dummy printer device


12/17/2015

[COMMON] add application_path() and create_local_path()
[COMMON] add create_date_file_path()
[COMMON] add get_host_time()
[EMU/OSD] remove EMU::application_path() and EMU::bios_path()
[EMU/OSD] remove OSD::create_date_file_name()
[EMU/OSD] remove EMU::get_host_time()
[WIN32/SCREEN] fix screen rotation

[EX80] improve screen


12/16/2015

[COMMON] improve config, common, and fileio for other environments
[EMU/OSD] improve lock_vm() and unlock_vm() to support nesting
[EMU/OSD] add force_unlock_vm() to force unlock vm ignoring nesting

[VM/DISK] improve for other environments
[VM/F9368] support F9368
[VM/FMGEN] fix to use FILEIO class (thanks Mr.Artane.)
[VM/LD700] improve for other environments
[VM/MC6809] improve for other environments
[VM/UPD765A] improve for other environments
[VM/V99X8] fix to check if screen buffer is valid or not

[EX80] support save/load state
[FM77AV] import Mr.Artane.'s fixes (Commits on Dec 13, 2015)
[J3100] fix build errors (thanks Mr.Artane.)
[TK80BS] support save/load state


12/15/2015

[WINMAIN] fix to check if button caption is multi-line or not

[VM/I8080] fix to use fetch_op() function to fetch opecode
[VM/I8080] support to read interrupt enabled status

[EX80] support TOSHIBA EX-80
[TK80BS] improve screen


12/10/2015

[COMMON] improve common.h for other environments
[WIN32/SCREEN] fix crt filter issue for eFM-7


12/9/2015

[EMU/OSD] add OSD class and move OS dependent codes to OSD class
[WIN32/SCREEN] support screen rotation 180deg and 270deg, not only 90deg
[WIN32/SCREEN] support to load png image from resource

[FM77AV] import Mr.Artane.'s fixes (Commits on Dec 7, 2015)
[PC9801] fix PC-9801-26(K) irq number on YM2203 port A again
[TK80BS] add printed circuit board picture and buttons
[X1TURBO/PSUB] fix kana key map in keyboard mode B


11/18/2015

[WINMAIN] support to eject disk with d88 bank selection menu open
[EMU/WIN32] add tape_playing(), tape_recording(), and tape_position()

[VM/*] add tape_playing(), tape_recording(), and tape_position()

[FM77AV] import Mr.Artane.'s fixes (Commits on Nov 14, 2015)


10/31/2015

[WIN32/INPUT] fix broken auto key function
[WIN32/INPUT] support to notify l/r-shift/control/menu key to virtual machine
[WIN32/SOUND] fix not to create a sound buffer on sound card memory

[FM77AV] import Mr.Artane.'s fixes (Commits on Oct 29, 2015)


10/27/2015

[VM/IO] fix build error
[VM/UPD765A] fix tc signal in exec phase (thanks Mr.PI.)


10/7/2015

[VM/DISK] import Mr.Artane.'s fixes for FM-7 PSY-O-BLADE
[VM/IO] improve debug log for second cpu

[FM77AV] import Mr.Artane.'s fixes (Commits on Oct 2, 2015)


10/6/2015

[WIN32/DEBUGGER] add > command to output the logfile

[VM/UPD7220] support vram data mask to support 12bit vram for MZ-3500
[VM/Z80] improve disassembler for DD/ED/FD opecodes

[MZ3500/SUB] fix character vram bit width
[MZ3500/SUB] fix graphic vram size
[MZ3500/SUB] fix to negate color palette number of kanji character screen


9/30/2015

[EMU/WIN32] fix eFM77AV40/EX menu issues

[VM/TMS3631] add TMS3631 based on Neko Project 2

[MZ3500/SUB] support monochrome mode
[MZ3500/SUB] support vertical/horizontal line
[MZ3500/SUB] fix character color in the case color number is zero
[PC9801] fix PC-9801-26(K) irq number on YM2203 port A
[PC9801] support PC-9801-14


9/29/2015

[EMU/WIN32] fix terrible mistakes (thanks Mr.Artane.)

[VM/DISK] import Mr.Artane.'s fixes for FM-7 PSY-O-BLADE
[VM/MB8877] import Mr.Artane.'s fixes for FM-7 series

[FM77AV] add eFM77AV40/40EX codes (thanks Mr.Artane.)
[FM77AV] import Mr.Artane.'s fixes (from SNAPSHOT 20150926)
[MZ3500/MAIN] support some dip switches
[MZ3500/SUB] support middle resolution monitor and green monitor
[PC9801] support to enable/disable sound board and sound bios


9/26/2015

[MZ3500/SUB] fix kanji character renderer
[MZ3500/SUB] fix character renderer for non transparent black color


9/25/2015

[MZ3500] support HALT button
[MZ3500/KEYBOARD] support PRO/OP mode switch
[MZ3500/KEYBOARD] support CL and 00 keys
[MZ3500/KEYBOARD] change key assign for program control keys
[MZ3500/MAIN] fix to add one clock wait for each m1 cycle
[MZ3500/MAIN] fix memory mapper to check me1/me2 signals
[MZ3500/MAIN] fix memory mapper to update only when register values are changed
[MZ3500/SUB] support kanji rom and kanji vram
[MZ3500/SUB] implement graphic screen renderer


9/23/2015-2

[MZ3500/KEYBOARD] support kana key


9/23/2015

[VM/UPD765A] fix index hole signal width to 5msec (thanks Mr.Sato)

[MZ3500] support SHARP MZ-3500
[MZ3500/KEYBOARD] implement keyboard
[MZ3500/SUB] enlarge ram size of sub cpu
[MZ3500/SUB] fix text screen renderer


9/17/2015

[TOOL/ANY2D88] support to convert solid image to 1dd
[TOOL/ANY2D88] support to convert solid image with sector size 256bytes

[WINMAIN] improve to inhibit starting screen saver

[VM/DISK] fix issue in the case that file extension of solid image is *.dsk
[VM/DISK] update physical disk format table
[VM/DISK] improve fdi converter
[VM/DISK] support to get am1 position in id field
[VM/MB8877] improve timing to start read/write sector
[VM/MB8877] fix to use const time to search sector in incorrect timing setting
[VM/T3444A] fix to use const time to search sector in incorrect timing setting
[VM/UPD765A] fix to use const time to search sector in incorrect timing setting

[MZ80K/DISPLAY] support green monitor for MZ-80C
[X1TURBO/DISPLAY] fix issue in the case that char raster is greater than 8/16


9/15/2015

[TOOL/ANY2D88] add new utility any2d88 that converts any format image to d88

[COMMON] add FileLength() function to FILEIO class
[WIN32/DEBUGGER] disable ctrl-c on the debug console

[VM/DATAREC] support to record tap format image
[VM/DISK] simplify image loader
[VM/DISK] improve cpdread converter for invalid track size table

[MZ80K/MZ80FIO] fix drive number register (thanks Mr.masa and Mr.Suga)


9/9/2015

[COMMON] add batch file to merge manifest file for Windows Vista or later


9/8/2015

[VM/DISK] fix for single density disk in double density drive
[VM/T3444A] support T3444A/T3444M

[BMJR] support HITACHI BASIC Master Jr
[MZ80K/MZ80FIO] support MZ-80FIO
[MZ80K/KEYBOARD] fix eisuu/kana key to toggle with kana key
[PC6001] fix signal connections between i8255 and PC-80S31K


8/28/2015

[WIN32/SCREEN] improve and simplify crt filter

[VM/DATAREC] rename SIG_DATAREC_OUT to SIG_DATAREC_MIC
[VM/DATAREC] rename set_context_out() to set_context_ear()
[VM/DEVICE] add virtual functions to get remaining time until event is expired
[VM/DEVICE] add functions to get remaining time until event is expired
[VM/MC6800] fix build error for MB8861
[VM/YS6522] support YS6522 based on MAME 0.164

[JR100] support National JR-100


8/25/2015

[WIN32/SCREEN] improve crt filter for non stretched screen
[WIN32/SCREEN] fix not to lock Direct3D9 offscreen surface for a long period

[PC8801/PC88] import Mr.PI.'s fixes from XM8 version 1.30


8/24/2015

[VM/DISK] fix to save image in d88 format if solid image is physical formatted
[VM/DISK] fix to save single side solid image correctly
[VM/DISK] fix imagedisk converter for single side disk image


8/23/2015

[VM/DISK] fix routine to check FM-7 DEATH FORCE


8/22/2015-2

[VM/DISK] support solid 1dd 280kb disk image with .img extension
[VM/MB8877] revert the fix in 8/22/2015

[SMC777] fix floppy drive speed to 600rpm


8/22/2015

[COMMON] replace many _TCHAR* to const _TCHAR* mainly for file path
[WIN32/DEBUGGER] improve L and W command to load/write intel hex format file

[VM/DISK] add patch for FM-7 DEATH FORCE (thanks Mr.Artane.)
[VM/MB8877] fix for 2d disk image on 2dd/2hd drive (thanks Mr.Artane.)
[VM/MC6809] improve mc6809 instructions (thanks Mr.Artane.)

[FM77AV] import Mr.Artane.'s fixes (Commits on Aug 19, 2015)
[MZ2500/CRTC] fix character blinking (thanks Mr.KanegonP)


8/21/2015

[WIN32/INPUT] improve auto key function for us-keyboard
[WIN32/INPUT] support to load vm's own auto key table

[VM/DISK] support *.1dd floppy disk image
[VM/I286] fix build error
[VM/MB8877] fix to check cylinder number for read/write sector command

[SMC777] support SONY SMC-777


8/13/2015

[VM/HUC6280] support debugger
[VM/I86] fix aad instruction for NEC V30
[VM/I286] add NEC V30 instructions based on MAME 0.128

[PC9801U] fix to use new V30 core
[PC9801VF] fix to use new V30 core
[PC9801VM] fix to use new V30 core
[PC98DO] fix to use new V30 core
[PC98HA] fix to use new V30 core
[PC98LT] fix to use new V30 core


8/9/2015

[VM/MB8877] support MB8866
[VM/MB8877] improve type-2/3 command timing for E flag
[VM/MB8877] fix write protect status (thanks Mr.Artane.)

[MZ80A] change fdc device type from MB8876 to MB8866


8/8/2015

[VM/DISK] remove ugly patch for X1turbo Alpha
[VM/MB8877] remove ugly patch for X1turbo Alpha
[VM/MB8877] improve type-1 command timing
[VM/MB8877] improve type-2/3 command timing for E flag
[VM/MB8877] improve force interrupt command to finish write sector command
[VM/Z80SIO] improve transmitting timing for external clock signal


8/7/2015

[VM/DATAREC] support ASCII MSX cas format tape image (thanks Mr.Sean Young)
[VM/DATAREC] improve mzt converter to support fast forward/rewind
[VM/DISK] improve image decoder for single side and data mark missing cases
[VM/MB8877] fix timing to abort searching the target sector
[VM/MB8877] fix to raise irq signal after abort searching the target sector
[VM/MB8877] fix to abort write command before drq when disk is write protected
[VM/MB8877] fix to abort write command when lost data occurs at first drq
[VM/MB8877] fix to read/write data register when lost data occurs
[VM/MB8877] fix to show crc error when verify track number at seek command
[VM/MB8876] fix not to show busy after seek command for FMR-30/50/60 series


8/5/2015

[WINMAIN] support menu to enable/disable correct fdc timing

[VM/DISK] improve to check both id crc error and data crc error
[VM/I286] fix issue that emulation may go to infinite loop when cpu is halted
[VM/MB8877] fix index hole signal width to 5msec (thanks Mr.Sato)
[VM/MB8877] improve drq signal timing to check E flag of type-2 and 3 commands
[VM/MB8877] improve drq signal timing for write track command
[VM/MB8877] improve data lost timing for write sector and write track commands
[VM/MB8877] improve to check both id crc error and data crc error
[VM/UPD765A] improve timing to go to exec phase
[VM/UPD765A] improve to check both id crc error and data crc error
[VM/Z80SIO] improve transmitting timing (thanks Mr.Sato)

[FMR50/BIOS] improve to check both id crc error and data crc error
[FMR50/BIOS] improve write track command for sectors without data field
[MSX2/MEMORY] improve to check both id crc error and data crc error


8/3/2015

[VM/DISK] support sectors without data field
[VM/MB8877] improve drq signal timing for write sector command (thanks Mr.Sato)
[VM/MB8877] improve index hole signal width (thanks Mr.Sato)
[VM/MB8877] improve read/write command to wait at least 60msec after seeking
[VM/MB8877] improve seek command not to set seek error without verify flag
[VM/MB8877] improve read/write sector commands for sectors without data field
[VM/MB8877] improve write track command for sectors without data field
[VM/MB8877] improve force interrupt command to finish write track command
[VM/MB8877] remove ugly patch for MZ-2500 RELICS
[VM/UPD765A] improve read/write sector commands for sectors without data field
[VM/Z80SIO] improve transmitting timing (thanks Mr.Sato)


8/1/2015

[WINMAIN] support menu to modify write protected status of floppy disk image
[WINMAIN] support menu to enable/disable DirectInput for keyboard
[WIN32/INPUT] support to swap joystick buttons #1/#3/#5... and #2/#4/#6...

[VM/DISK] fix not to inherit the write protected status of image file
[VM/DISK] support to modify write protected status of floppy disk image
[VM/DISK] add ugly patch for FM-7 Gambler Jiko Chuushin Ha
[VM/MB8877] improve read/write commands to access the current track
[VM/MB8877] improve seek commands (thanks Mr.Artane.)
[VM/MB8877] suppot to set/get write protected status of floppy disk image
[VM/MB8877] add ugly patch for FM-7 Gambler Jiko Chuushin Ha
[VM/MC6809] improve mc6809 instructions (thanks Mr.Artane.)
[VM/PC6031] suppot to set/get write protected status of floppy disk image
[VM/PTF20] suppot to set/get write protected status of floppy disk image
[VM/UPD765A] suppot to set/get write protected status of floppy disk image

[FM77AV] import Mr.Artane.'s fixes


7/31/2015

[COMMON] fix all vcproj files to disable WholeProgramOptimization option
[COMMON] fix all vcproj files to enable SSE2 instructions
[CONFIG] support ignore crc options individually for each floppy drive
[WINMAIN] support ignore crc options individually for each floppy drive

[VM/DISK] support ignore crc options individually for each floppy drive
[VM/MB8877] improve read/write commands  (thanks Mr.Artane.)
[VM/MC6809] improve mc6809 instructions (thanks Mr.Artane.)
[VM/PC80S31K] fix m1 wait for PC-8801 series (thanks Mr.PI.)
[VM/PC80S31K] fix for force ready signal (thanks Mr.PI.)
[VM/UPD765A] fix for force ready signal (thanks Mr.PI.)
[VM/YM2203] improve timer timing (thanks Mr.PI.)
[VM/YM2151] improve timer timing (thanks Mr.PI.)

[FM77AV] import Mr.Artane.'s fixes
[PC8801] import Mr.PI.'s fixes from XM8 version 1.20


6/28/2015

[FM77AV] import Mr.Artane.'s fixes
[MZ2500/CMT] fix reset signal
[MZ2500/CRTC] improve timing for 15KHz and 24KHz mode
[MZ2500/MEMORY] improve vram wait in display timing
[PC8801] import Mr.PI.'s fixes from XM8 version 1.10


6/25/2015

[EMU/WIN32] add sleep(ms) for virtual machines (thanks Mr.PI.)
[WIN32/DEBUGGER] support * for bc/bd/be to clear/disable/enable all points
[WIN32/DEBUGGER] fix to accept escape key when the console is active

[VM/FMGEN] fix status register (thanks Mr.PI.)
[VM/MC6809] improve mc6809 instructions (thanks Mr.Artane.)
[VM/YM2203] fix busy period (thanks Mr.PI.)

[FM77] add eFM77 codes (thanks Mr.Artane.)
[FM77AV] import Mr.Artane.'s fixes
[PC8801] import Mr.PI.'s fixes from XM8 version 1.00
[PC8801/PC88] fix to check if sio output is connected to cmt or rs232c


4/29/2015

[EMU/WIN32] suport to load intel hexadecimal object file format
[WIN32/DEBUGGER] fix my_hexatoi() for 32bit hexadecimal value

[VM/MC6809] improve mc6809 instructions (thanks Mr.Artane.)

[FM77AV] import Mr.Artane.'s fixes
[Z80TVGAME] support Homebrew Z80 TV GAME SYSTEM


4/24/2015

[VM/DISK] fix to check only bit4-7 of sector status (thanks Mr.Artane.)
[VM/I386] improve i386 core based on MAME 0.160
[VM/MC6809] improve mc6809 instructions (thanks Mr.Artane.)

[FM77AV] import Mr.Artane.'s fixes


4/10/2015

[CONFIG] remove model-dependent codes

[VM/MC6809] improve mc6809 instructions (thanks Mr.Artane.)
[VM/MC6809] support debugger (thanks Mr.Artane.)

[FM77AV] import Mr.Artane.'s fixes
[MZ2800/MEMORY] fix memory bank swith


4/7/2015

[VM/MC6809] improve mc6809 instructions (thanks Mr.Artane.)

[FM77AV] add eFM77AV codes (thanks Mr.Artane.)


3/28/2015

[FM7] add eFM7 codes (thanks Mr.Artane.)


3/26/2015

[VM/MB8877] fix not to return error status when seek to unformatted track (thanks Mr.Artane.)
[VM/MC6809] improve mc6809 instructions (thanks Mr.Artane.)
[VM/YM2151] support mamefm.dll
[VM/YM2203] fix to check SUPPORT_MULTIPLE flag of mamefm.dll

[MSX2/MEMORY] import Mr.tanam's fixes


3/21/2015-2

[MSX2] import Mr.umaiboux's patches posted on Mr.tanam's blog


3/21/2015

[VM/DISK] support 1dd floppy image
[VM/V99X8] support V99x8 (thanks Mr.umaiboux and Zodiac)
[VM/V99X8] support save/load state
[VM/Z80] support to hook ret opecode for pseudo bios call

[MSX1] add yaMSX1 codes (thanks Mr.tanam, Mr.umaiboux and fMSX)
[MSX1] support save/load state
[MSX2] add yaMSX2 codes (thanks Mr.tanam, Mr.umaiboux and fMSX)
[MSX2] support save/load state


3/19/2015

[WIN32/INPUT] fix DirectInput issues


3/15/2015

[WINMAIN] support to disable Desktop Window Manager (DWM) automatically
[WIN32/INPUT] support DirectInput for keyboard

[VM/*] simplify including fileio.h
[VM/DATAREC] fix sound mixer
[VM/MC6809] improve mc6809 instructions (thanks Mr.Artane.)
[VM/UPD7801] fix disassembler

[FM16PI] support save/load state
[FMR30] support save/load state
[FMR50] support save/load state
[FMR60] support save/load state
[FMR70] support save/load state
[FMR80] support save/load state
[FP200/IO] fix lcd driver


3/12/2015

[FMR50/BIOS] support to format a floppy disk image physically


3/12/2015

[VM/DATAREC] support to play tape sound
[VM/DATAREC] support FUJITSU FM-7/77 t77 format tape image (thanks Mr.Artane.)
[VM/EVENT] suppot to change secondary cpu clock (thanks Mr.Artane.)
[VM/MC6809] improve mc6809 instructions (thanks Mr.Artane.)
[VM/MEMORY] support memory wait
[VM/PTF20] support save/load state
[VM/UPD765A] fix not to write sector because of tc if no data transfered

[FP200] support save/load state
[FP200] support memory and io wait
[HC20] support save/load state
[HC40] support save/load state
[HC80] support save/load state
[X07] support save/load state
[X1TURBO] support cmt control buttons


3/4/2015

[VM/I8255] fix save/load state

[MZ700/MEMORY] support PCG-700
[PC8201] support save/load state


3/3/2015

[CONFIG] add cmt baud rate setting (thanks FP-1100 user)

[VM/UPD765A] fix period to raise lost data for write id command

[FP1100/MAIN] fix expansion slot selection
[FP1100/SUB] fix color register (thanks FP-1100 user)
[FP1100/SUB] fix vram plane mask
[FP1100/SUB] support dipswitch to select cmt baud rate


2/28/2015

[COMMON] fix typo virtical to vertical (thanks Mr.Koucha-Youkan)

[VM/DISK] fix to use correct gap0/gap1/gap3 length for known format images
[VM/Z80] fix disassembler (thanks Mr.Reddam)


2/21/2015

[WIN32/INPUT] support to specify wait after shift key is pressed or released
[WIN32/SCREEN] improve crt filter for rotated screen
[CONFIG] add screen rotation setting

[VM/BEEP] improve sound quality
[VM/DATAREC] simplify sound mixer
[VM/DEVICE] rename bios_call() to bios_call_i86()
[VM/DEVICE] rename bios_int() to bios_int_i86()
[VM/DEVICE] add virtual function bios_call_z80()
[VM/DISK] support to fix sector number from big endian to little endian
[VM/EVENT] support more precise loop event timing
[VM/EVENT] improve sound quality
[VM/HD46505] fix to update timing after all required registers are written
[VM/PCM1BIT] simplify sound mixer
[VM/PCM1BIT] fix to suppress petite noise when go to mute
[VM/SN76489AN] improve sound quality
[VM/UPD7801] support correct serial i/o
[VM/Z80] support pseudo bios call

[FP1100] improve auto key timing after shift key is pressed or released
[FP1100] fix crtc horizontal frequency
[FP1100] support cmt
[FP1100/MAIN] support wait for i/o access
[FP1100/SUB] support cmt control circuit consists of some standard logic ics
[FP1100/SUB] support vram plane mask
[MZ1500] support screen rotation (thanks Mr.Koucha-Youkan)
[PASOPIA7/IOBUS] fix to initialize mio flag
[PC8801MA/PC88] improve beep and cmd sing mixer
[PC100] split setting for monitor type and screen rotation
[PV1000/PSG] improve sound quality


2/13/2015

[VM/UPD765A] add ugly patch for PC-8801 Kimochi Disk 2

[FP1100] change slot indices to support floppy drives
[FP1100/MAIN] fix to clear irq from sub cpu when raise irq to sub cpu
[PC8801MA/PC88] fix routine to set back color to black in color mode
[PC8801MA/PC88] fix crtc to clear status in set interrupt mask (thanks Mr.cisc)
[PC8801MA/PC88] fix crtc to restart when dma underrun does not occur
[PC8801MA/PC88] fix out port 0x53 (thanks Mr.Redart)


2/1/2015

[VM/DISK] fix condition to check if the track offset is valid
[VM/DISK] fix routine to trim the disk image


1/31/2015

[VM/DISK] improve for format operation
[VM/DISK] fix issue that deleted mark is mistakely recognized as crc error
[VM/MB8877] support write track command
[VM/PTF20] rename pseudo EPSON TF-20 class from TF20 to PTF20
[VM/PTF20] improve format command
[VM/TF20] support EPSON TF-20
[VM/UPD765A] support write id command

[HC20] support EPSON TF-20


1/28/2015

[VM/DATAREC] fix issue for loading state file saved while recording
[VM/PC6031] support save/load state
[VM/UPD7552] support save/load state
[VM/UPD7552] support init() function to specify sound rate
[VM/YM2203] fix to reset fmdll before registers are restored (thanks Mr.Rednow)

[FAMILYBASIC] support save/load state
[MULTI8/CMT] fix issue for loading state file saved while recording cmt
[MZ2800] support save/load state
[MZ5500] support save/load state
[MZ6500] support save/load state
[PC6001] fix to specify sound rate to uPD7552
[PC6001] support save/load state
[PC6001MK2] support save/load state
[PC6001MK2SR] support save/load state
[PC6601] support save/load state
[PC6601SR] support save/load state
[PC8801MA/PC88] fix issue for loading state file saved while recording cmt
[PC8801MA/PC88] fix crtc for dma underrun case (thanks Mr.Rednow)
[PC98HA] support save/load state
[PC98HA] fix crash issue
[PC98LT] support save/load state
[PC98LT] fix crash issue


1/24/2015

[COMMON] avoid _tfopen_s() and use _tfpoen() not to lock reading file
[WINMAIN] fix to close d88 format disk image after image titles are read

[VM/DISK] fix to save image to temporary file if image file cannot be written
[VM/MB8877] fix to enable REC NOT FOUND patch only for Batten Tanuki

[X1TURBO] support to select boot floppy media type 2D or 2HD


1/21/2015

[MZ2500/SERIAL] fix port 0xcd for specifying Z80SIO TX/RX clock frequency
[MZ2800/SERIAL] fix port 0xcd for specifying Z80SIO TX/RX clock frequency


1/19/2015

[VM/HD146818P] support save/load state
[VM/I386] support save/load state
[VM/I8080] support save/load state
[VM/I8155] support save/load state
[VM/M6502] support save/load state
[VM/MC6800] support save/load state
[VM/MC6820] support save/load state
[VM/MC6840] support save/load state
[VM/UPD4991A] support save/load state
[VM/UPD71071] support save/load state
[VM/Z80SIO] improve transmit/receive timing
[VM/Z80SIO] support external transmit/receive clocks

[FP1100] support save/load state
[MULTI8] support save/load state
[MYCOMZ80A] support save/load state
[MZ1500] support correct sio timing
[MZ2200] support correct sio timing
[MZ2500] support to switch sio port address
[MZ2500] support correct sio timing
[MZ2800] support to switch sio port address
[MZ2800] support correct sio timing
[MZ5500] support correct sio timing
[PASOPIA] support save/load state
[PASOPIA7] support save/load state
[PASOPIA7] fix to use standard i/o bus class
[PASOPIA7/IOBUS] simplify unique i/o bus class
[QC10] support save/load state
[QC10] support correct sio timing
[X1TURBO] support correct sio timing
[X1TURBO] fix to use standard i/o bus class
[X1TURBO/IOBUS] simplify unique i/o bus class


1/14/2015

[COMMON] fix to use secure string functions
[COMMON] add substitutes for _TCHAR and secure string functions

[VM/I386] improve i386 core again based on MAME 0.157

[MZ80A] support MZ-80AIF and floppy drives (thanks Mr.Suga)


1/11/2015

[VM/MC6820] fix mc6820 build error (thanks Mr.Artane.)

[PC8801MA/PC88] fix RGB to COLOR_RGB macro (thanks Mr.Artane.)
[PHC25] fix issue that cmt tape igam can not be correctly loaded


1/10/2015

[VM/DATAREC] support NEC PC-6001 p6t format tape image (temporary)
[VM/DATAREC] improve NEC PC-6001 p6 format tape image loader
[VM/I386] improve i386 core based on MAME 0.157
[VM/MC6847] support save/load state
[VM/MSM58321] support save/load state
[VM/YM2203] support to change device type to YM2608

[MAP1010] support save/load state
[MZ80A] support save/load state
[MZ80K] support save/load state
[MZ1200] support save/load state
[PC6001/SUB] support p6t format tape image (temporary)
[PC6001/SUB] fix to start/stop data recorder by 0x19/0x1a command
[PC6001/PSUB] support p6t format tape image (temporary)
[PC6001/PSUB] fix cmt loader to wait 1sec between header and body
[PC8801MA] support to select PC-8801-23 (OPNA) or PC-8801-11 (OPN)
[PC100] support save/load state
[PHC20] support save/load state
[PHC25] support save/load state
[PV1000] support save/load state
[RX78] support save/load state


1/1/2015

[PC8801MA/PC88] fix to mask bit4-7 of extended ram bank register


12/29/2014

[VM/SN76489AN] support save/load state
[VM/TMS9918A] support save/load state
[VM/TMS9995] support save/load state
[VM/UPD7801] support save/load state

[M5] support save/load state
[MZ700] support save/load state
[MZ800] support save/load state
[MZ1500] support save/load state
[MZ1500/KANJI] support MZ-1R23 and MZ-1R24
[PC8801MA/PC88] fix many PC-8001mkIISR issues (thanks Mr.apaslothy)
[PV2000] support save/load state
[PYUTA] support save/load state
[SC3000] support save/load state
[SCV] support save/load state


12/26/2014

[VM/AND] support save/load state
[VM/I8237] support save/load state
[VM/I86] support save/load state
[VM/LS244] support save/load state
[VM/LS393] support save/load state
[VM/NAND] support save/load state
[VM/NOR] support save/load state
[VM/NOT] support save/load state
[VM/OR] support save/load state
[VM/UPD1990A] fix to show lsb bit of second when shift register is not updated
[VM/UPD7220] support save/load state

[PC8801MA/PC88] fix many PC-8001mkIISR issues (thanks Mr.apaslothy)
[PC8801MA/PC88] fix cmt issue that pacland cannot be loaded on PC-8001mkIISR
[PC9801] support save/load state
[PC9801E] support save/load state
[PC9801U] support save/load state
[PC9801VF] support save/load state
[PC9801VM] support save/load state
[PC98DO] support save/load state


12/25/2014

[EMU/WIN32] fix to remove printer file if the file size is less than 2 bytes
[EMU/WIN32] fix to initialize virtual machine when sound device type is changed

[VM/HD46505] support save/load state
[VM/I286] support save/load state
[VM/I8259] support save/load state
[VM/MCS48] support save/load state
[VM/UPD1990A] fix to show lsb bit of second after all bit are read

[MZ2200] support save/load state
[PC8801MA/PC88] fix many PC-8001mkIISR issues (thanks Mr.apaslothy)
[PC8801MA/PC88] fix renderer for graphic screen with text attribute color
[X1] support save/load state
[X1TWIN] support save/load state
[X1TURBO] support save/load state


12/23/2014

[EMU/WIN32] simplify get/put functions for several types in file i/o class

[VM/BEEP] support save/load state
[VM/DATAREC] support save/load state
[VM/DISK] support save/load state
[VM/DISK] fix issue that disk image except d88 or beta image may not be saved
[VM/EVENT] fix load state function to update number of sound samples per frame
[VM/FMGEN] support save/load state
[VM/I8251] support save/load state
[VM/I8253] support save/load state
[VM/I8255] support save/load state
[VM/IO] support save/load state
[VM/MB8877] support save/load state
[VM/PC6031] fix to initialize old_D2H
[VM/PC80S31K] support save/load state
[VM/PCM1BIT] support save/load state
[VM/RP5C01] support save/load state
[VM/UPD765A] support save/load state
[VM/UPD1990A] support save/load state
[VM/W3100A] support save/load state
[VM/YM2151] support save/load state
[VM/YM2203] support save/load state
[VM/Z80] support save/load state
[VM/Z80CTC] support save/load state
[VM/Z80DMA] support save/load state
[VM/Z80PIO] support save/load state
[VM/Z80SIO] support save/load state

[MZ80B] support save/load state
[MZ1500/QUICKDISK] fix to clear first data/send break flags
[MZ2500] support save/load state
[MZ2500/CMT] fix issue that Laydock is not correctly booted
[PC8001MKIISR] support save/load state
[PC8801MA] support save/load state
[PC8801MA/PC88] fix to reset dirty NIPPY patch flag
[PC8801MA/PC88] fix not to render text scree when dma ch.2 is not running


12/18/2014

[EMU/WIN32] support save/load state
[EMU/WIN32] support get/put functions for several types in file i/o class

[VM/EVENT] support save/load state functions
[VM/HUC6280] support save/load state functions
[VM/I8155] fix to clear event register id in reset()
[VM/I8253] fix to clear event register id in reset()
[VM/UPD765A] fix to clear event register id in reset()

[MZ2500/CMT] fix to check the pulse width of ipl reset signal
[PCENGINE] support save/load state


12/16/2014

[VM/MB8877] fix to show not ready status a moment when no command is running

[MZ80A] add EmuZ-80A codes (thanks Mr.Suga)


11/28/2014

[X1TURBO/DISPLAY] fix text renderer for 32rasters/char mode


11/22/2014

[WIN32/SCREEN] support two screen stretch modes keep aspect and fill screen

[VM/I8080] fix debugger trace issue in busreq status
[VM/I86] fix debugger trace issue in busreq status
[VM/I286] fix debugger trace issue in busreq status
[VM/I386] fix debugger trace issue in busreq status
[VM/Z80] fix debugger trace issue in busreq status


11/21/2014

[PC8801MA/PC88] fix to support multi blocks tape images
[PC8801MA/PC88] add dirty patch for NIPPY


10/29/2014

[PC8801MA/PC88] fix to check dma underrun in every frames
[PC8801MA/PC88] fix port number of crtc status
[PC8801MA/PC88] add function to read crtc parameters


10/28/2014

[PC8801MA/PC88] fix crtc issue that dma underrun never occurs
[PC8801MA/PC88] fix crtc status


10/27/2014

[PC8801MA/PC88] revert the uPD5257 fix for CHOBIN


10/26/2014

[WINMAIN] fix frame rate issue again


10/25/2014

[WINMAIN] fix frame rate issue (thanks Mr.Rednow)
[WIN32/DEBUGGER] fix issue about inputting decimal value

[VM/Z80] fix disassembler

[PC8801MA/PC88] fix uPD8257 dma controller
[PC9801] fix PC-9801-26K bios size


10/11/2014

[WIN32/DEBUGGER] fix issue that hexa value ends with d is recognized as decimal

[VM/Z80] fix disassembler

[PC8801MA/PC88] fix to press insdel key automatically when backspace is pressed


10/10/2014

[VM/I8155] fix issue in the case that cpu clock is less than const frequency
[VM/I8253] fix issue in the case that cpu clock is less than const frequency
[VM/Z80CTC] fix issue in the case that cpu clock is less than const frequency

[PC8801MA/PC88] support PCG-8100


10/4/2014

[PC8801MA/PC88] fix color/monochrome and 320x200/640x200 bits in port31


9/29/2014

[WIN32/SCREEN] support crt filter

[BABBAGE2ND] update circuit board picture
[PC9801U] support NEC PC-9801U
[PC9801VF] support NEC PC-9801VF


9/13/2014

[WIN32/DEBUGGER] support search command

[VM/I86] support to change IP register value from debugger console
[VM/I286] support to change IP register value from debugger console
[VM/I386] support to change IP register value from debugger console
[VM/MC6800] support debugger

[HC20/MEMORY] fix keyboard chattering


9/7/2014

[WIN32/DEBUGGER] support debugger console

[VM/DEBUGGER] support common debugger object
[VM/EVENT] fix to check ownew of event before it is canceled
[VM/I8080] support debugger
[VM/I86] support debugger
[VM/I86] remove code for i186 and i286
[VM/I286] fix for i8086/i8088/i80186
[VM/I286] fix not to quit REP when remained icount is less than 0
[VM/I286] support debugger
[VM/I386] support debugger
[VM/MB8877] fix not to cancel event registered by other device
[VM/MCS48] support debugger
[VM/UPD7801] support debugger
[VM/Z80] support debugger

[FM16PI] fix to use new i86 core
[FMR30] fix to use new i86 core
[MZ2200] fix to use new i86 core
[MZ5500] fix to use new i86 core
[MZ6500] fix to use new i86 core
[MZ6550] fix to use new i86 core
[PC8801/PC88] fix uPD8257 address and counter registers
[PC100] fix to use new i86 core
[PC9801] fix to use new i86 core
[PC9801E] fix to use new i86 core


8/29/2014

[PC8801/PC88] fix crtc to support non transparent mode
[PC8801/PC88] fix crtc issue that cursor is not displayed in non attibutes mode


8/28/2014

[COMMON] fix all vcproj files to set WholeProgramOptimization option
[WINMAIN] support 320x240 full screen mode

[VM/FMGEN] update fmgen.cpp from v1.49 to v1.50 (thanks Mr.Rururu-Tan)
[VM/FMGEN] update opna.cpp from v1.68 to v1.70 (thanks Mr.Rururu-Tan)
[VM/DATAREC] support NEC PC-6001 cas/p6 format tape image
[VM/I386] fix memory leak issue
[VM/I386] fix x87 opcodes FPREM and FPREM1 based on MAME 0.154
[VM/MC6847] support enable/disable signal
[VM/PC6031] support NEC PC-6031 and PC-6032 (thanks Mr.Nishida)
[VM/UPD765A] fix to compare all of C/H/R/N to search sector (thanks Mr.Haserin)

[GAMEGEAR/MEMORY] fix memory leak issue

[MZ2500] fix to reset only cpu and memory map in standard (non-ipl) reset
[MZ2500/CMT] fix to check the pulse width of ipl reset and cmt eject signals
[MZ2500/CRTC] fix 640x400, 4 colors mode for Yukara K2 (temporary)
[MZ2500/FLOPPY] support i/o signal to swtich internal/external floppy drives
[MZ2500/FLOPPY] remove dirty patch for Laydock

[PC6601] support real sub cpu emulation (thanks Mr.Moriya)
[PC6601/FLOPPY] rename system to floppy
[PC6601/FLOPPY] split to PC-6601 internal floppy drive class and PC-6031 class
[PC6601/FLOPPY] support to switch internal/external floppy drives
[PC6601/MEMORY] split to memory class and timer/irq class
[PC6601/MEMORY] support CRTKILL/BUSRQ signals
[PC6601/PSUB] rename keyboard to psub (pesudo sub cpu)
[PC6601/PSUB] simplify cmt codes

[PC8801/PC88] fix text attributes


5/15/2014

[PC6001] update yaPC-6001/6201/6601 codes (thanks Mr.tanam)
[PC6001] support PC-80S31K floppy drives
[PC6001MK2] support PC-80S31K floppy drives
[PC6001MK2SR] add yaPC-6401 codes (thanks Mr.tanam)
[PC6601SR] add yaPC-6801 codes (thanks Mr.tanam)


5/1/2014

[VM/I286] reimplement based on MAME 0.149
[VM/I286] support disassembler
[VM/I386] reimplement based on MAME 0.152
[VM/I386] support disassembler

[FMR50] split project for i286, i386 and i486
[FMR60] split project for i286, i386 and i486
[FMR50/MEMORY] improve memory address mask for cpu and dma
[FMR50/MEMORY] support shutdown flag
[FMR50/MEMORY] remove invalid color palette i/o
[FMR50/MEMORY] fix text color palette #0
[FMR50/MEMORY] fix text reverse/blink
[FMR50/TIMER] support free run counter


4/17/2014

[WINMAIN] fix resource leak issue (thanks Mr.Redart)
[EMU/WIN32] fix resource leak issue (thanks Mr.Redart)

[VM/FMGEN] fix compiler dependent issue
[VM/YM2203] support full sound generator dll features (thanks Mr.Redart)

[MZ1500/QUICKDISK] support *.qdf raw quick disk images
[PX7/MEMORY] fix super impose signal based on openMSX-0.10.0


4/10/2014

[EMU/WIN32] support to map keys to joystick buttons

[GAMEGEAR] fix to map keys to joystick buttons
[MASTERSYSTEM] fix to map keys to joystick buttons
[PX7/MEMORY] fix to add one clock wait for each m1 cycle
[PC6001] update yaPC-6001/6201/6601/6801 codes (thanks Mr.tanam)


4/8/2014

[EMU/WIN32] support to capture the movie sounds in DirectShow codes

[VM/DATAREC] support SORD M5 cas format tape image
[VM/LD700] support PIONEER LD-700 laser-disc player based on openMSX-0.10.0
[VM/PCM1BIT] fix noise occurs when input signals top
[VM/YM2203] support to overwrite i/o mode to fixed value

[M5/CMT] stop loading cmt when tape image reaches the end of tape
[PX7] support PIONEER PX-7 (MSX1 + laser-disc player)
[PX7] fix MSX1 implements (thanks Mr.umaiboux)


4/7/2014

[WINMAIN] fix issue in the case that menu bar becomes multi line

[VM/DATAREC] fix to output no sound signal when tape image reaches end of tape
[VM/YM2203] fix build error in YM2608 case


4/1/2014

[VM/TMS9918A] fix mode1 and mode1+2 to fill out of screen with back color
[VM/YM2203] fix i/o port codes for AY-3-8910/8912/8913
[VM/YM2203] fix assert issue in fmgen module (thanks Mr.Mamiya)

[PC8001MK2SR] fix ini file name


3/26/2014

[EMU/WIN32] improve video recorder timing to sync to sound recorder
[EMU/WIN32] improve video recorder to compress frames in another thread
[EMU/WIN32] support to play a movie file
[EMU/WIN32] support Fgets() in file i/o class
[EMU/WIN32] support new function to get the file path without extension

[VM/TMS9918A] support super impose

[GAMEGEAR] add yaGAMEGEAR codes (thanks Mr.tanam)
[MASTERSYSTEM] add yaMASTERSYSTEM codes (thanks Mr.tanam)
[PC6001] update yaPC-6001 codes (thanks Mr.tanam)
[PC6001MK2] add yaPC-6201 codes (thanks Mr.tanam)
[PC6601] add yaPC-6601 codes (thanks Mr.tanam)
[PX7] support PIONEER PX-7 (MSX1 + laser-disc player) (partial)


1/8/2014

[VM/DISK] fix cpdread converter to check cylinder/side in track info block
[VM/DISK] fix cpdread converter to check deleted mark
[VM/MB8877] fix to seek one track when force interrupt is done

[MZ800/FLOPPY] connect fdc drq signal to cpu irq pin
[MZ800/FLOPPY] support irq mask register
[MZ800/FLOPPY] support motor on/off signal delay
[MZ800/MEMORY] support monochrome display
[MZ800/MEMORY] fix to connect vblank signal to Z80PIO:PA5, not hblank signal


12/31/2013

[EMU/WIN32] support printer interface

[PC8801/PC88] support printer interface
[PC9801/PRINTER] support printer interface
[PC98LT/PRINTER] support printer interface
[MZ800] change the floppy drive type from 2D to 2DD
[X1TURBO/PRINTER] support printer interface


12/5/2013

[VM/MC6840] support MC6840 (partial)

[PC8801/PC88] fix to show opn busy flag at the first access only for ALPHA
[PC8801/PC88] support crtc reverse flag


8/24/2013

[EMU/WIN32] fix access lamp renderer for Direct3D9

[VM/HD46505] fix to initialize frequency if vline is lesser than 400
[VM/MB8877] fix not to show record not found status after drive is changed
[VM/MB8877] fix to activate access lamp while searching target sector
[VM/MC6847] add function to load external cgrom image
[VM/MC6847] support to request bus to cpu in display timing
[VM/MC6847] support color bleed in black/white pattern (thanks Mr.tanam)

[PC6001] add yaPC-6001 codes (thanks Mr.tanam)
[X1TURBO/EMM] change EMM memory size to 320KB
[X1TURBO/PSUB] fix to clear irq flag when z80 reads data from sub cpu


8/21/2013

[WINMAIN] fix to use GetFullPathName() to get the parent directory

[VM/MB8877] modify constant period for searching sector


8/16/2013

[VM/DISK] add ugly patch for X1turbo ARCUS
[VM/MB8877] fix to use constant period for searching sector if disk has no skew
[VM/MB8877] fix to show busy status while searching sector if sector not found
[VM/Z80DMA] fix dma stop condition


8/10/2013

[VM/DATAREC] fix not to skip frames while doint ff/rew
[VM/DATAREC] support ff/rew for cas and tap images
[VM/DATAREC] support APSS signals and doing APSS for SHARP X1

[MZ2200] support to select if loading mzt to ram directly or not
[X1TURBO] fix cmt ff/rew speed to x16
[X1TURBO/PSUB] support APSS command


8/9/2013

[EMU/WIN32] improve debug log function

[VM/Z80DMA] fix not to reset all registers in reset command

[X1] support CZ-8BM2
[X1/MOUSE] support serial mouse


8/8/2013

[VM/DISK] fix not to convert standard disk images to d88 format images
[VM/DISK] add ugly patch for X1turbo ALPHA
[VM/HD46505] reset registers and timings in reset()
[VM/MB8877] fix to use constant wait to search sector for standard disk image
[VM/MB8877] add ugly patch for X1turbo ALPHA
[VM/YM2151] fix to show busy status in a moment
[VM/YM2203] fix to show busy status in a moment
[VM/Z80DMA] fix dma stop condition

[PC8801/PC88] improve initial memory pattern
[X1TURBO/DISPLAY] fix text renderer for kanji character on standard display
[X1TURBO/DISPLAY] fix text renderer for 16rasters/char mode
[X1TURBO/IO] fix not to add wait for text vram (temporary)


8/2/2013

[EMU/WIN32] fix to create new avi file when current file is close to 2GB

[VM/DISK] support 1.20MB/1.44MB/2.88MB floppy disk images
[VM/DISK] fix to add index mark in track image
[VM/UPD765A] fix read data command when sector size or number is invalid
[VM/UPD765A] fix seek time for MZ-3500


8/1/2013

[VM/DEVICE] support virtual function to set or get expend cpu clocks
[VM/DEVICE] support virtual function to get passed usec
[VM/DEVICE] support virtual functions for dma access with i/o wait
[VM/DISK] support function to get perid to transfer specified bytes
[VM/DISK] support functions to get drive rpm and track size
[VM/DISK] improve make track image
[VM/DEVICE] support function to get passed usec
[VM/I86] support function to get and set expend cpu clocks
[VM/I86] fix single mode dma when busreq is active
[VM/I286] support function to get and set expend cpu clocks
[VM/I386] fix single mode dma when busreq is active
[VM/I386] support function to get and set expend cpu clocks
[VM/I386] fix single mode dma when busreq is active
[VM/MB8877] improve timing of index hole, seek, search sector and transfer data
[VM/MB8877] improve to raise drq signal for each data
[VM/MB8877] improve timing of index hole, seek, search sector and transfer data
[VM/UPD765A] improve read data command to read sector gaps among sectors
[VM/UPD765A] improve read id command to read id of first found sector
[VM/Z80] support function to get and set expend cpu clocks
[VM/Z80] fix single mode dma when busreq is active
[VM/Z80DMA] improve timing of data transfer, bus request and release

[PC8801/PC88] support to select hireso/standard display type
[PC8801/PC88] improve memory wait (thanks Mr.Crazy Unit)
[X1TURBO] fix not to input 2MHz to Z80CTC on CZ-8BS1
[X1TURBO/DISPLAY] fix color reverse attribute (thanks Mr.Enri)
[X1TURBO/FLOPPY] support motor on/off signal (thanks Mr.Sato)
[X1TURBO/IO] improve i/o wait (thanks Mr.Sato)


7/25/2013

[X1TURBO/DISPLAY] fix text renderer for vertical/horizontal doubled character


7/24/2013

[WINMAIN] support 320x240 fullscreen mode
[EMU/WIN32] support multiple quick disk drives and cart slots
[CONFIG] support to read/write ini file


7/23/2013

[WINMAIN] simplify codes for boot mode and device type menus
[EMU/WIN32] fix sound recorder not to output the old samples

[VM/HD146818P] fix not to save backuped ram if it is not modified
[VM/MCS48] fix to divide the given clocks in MCS48 class
[VM/MCS48] fix not to run cpu if enough clocks are not given
[VM/RP5C15] fix not to save backuped ram if it is not modified

[FAMILYBASIC] support to select basic rom
[FAMILYBASIC/MEMORY] fix not to save backuped ram if it is not modified
[FMR30/CMOS] fix not to save backuped ram if it is not modified
[FMR50/CMOS] fix not to save backuped ram if it is not modified
[J3100SL/SLMEMORY] fix not to save backuped ram if it is not modified
[PC8801MA] support dipswitch to select memory wait on/off
[PC8801MA/PC88] fix display vertical frequency
[PC8801MA/PC88] fix m1 wait and ram/vram wait clocks
[PC98HA/MEMORY] fix not to learn ram/ram drive/memcard if they are not modified
[QC10/MEMORY] fix not to save backuped ram if it is not modified
[TK80BS] support to select basic rom
[MZ700/CMOS] fix not to save backuped ram if it is not modified
[SCV/MEMORY] fix not to save backuped ram if it is not modified
[X1TURBO/PSUB] fix key repeat timing
[X1TURBO/SUB] fix signal to detect cassette tape


5/11/2013

[VM/I286] reimplement based on MAME 0.148
[VM/I386] reimplement based on MAME 0.148
[VM/I8255] improve mode #1 and #2
[VM/MCS48] support mcs48 based on MAME 0.148

[X1TURBO] support real sub cpu and keyboard emulation
[X1TURBO/DISPLAY] fix routine to get currently displayed character address
[X1TURBO/DISPLAY] fix routine to render Vx2 character
[X1TURBO/PSUB] improve key repeat timing


4/25/2013

[VM/DATAREC] fix mzt image converter based on Bin2Wav

[MZ2200] fix to reset Z80PIO in special_reset()
[MZ2200/MEMORYB80] fix to load mzt image to memory only when offset is 0
[MZ2200/MZ1M01] fix to reset inport value from Z80PIO in reset()

[PC8201] fix cpu clock from 2.4MHz to 2.4576MHz
[PC8201] support cmt
[PC8201] fix to reset rtc strobe signal at boot


4/14/2013

[WINMAIN] support to show a message on title bar post from vm or emu class
[WINMAIN] disable close media menu when media file is not opened
[EMU/WIN32] add function to post a message onto title bar

[VM/DATAREC] fix mzt image converter to add 1sec space after header block
[VM/DATAREC] support to post the tape status message onto title bar
[VM/Z80PIO] fix handshake signals in bidirectional mode
[VM/Z80PIO] fix masks follows bit in control register
[VM/Z80PIO] fix to disable interrupt until the mask register is written

[MZ80B/MEMORY] support optional 2nd vram
[MZ2200/MEMORY] fix not to load mzt image to memory when attribute is not $01
[MZ2200/MZ1M01] support 16bit cpu board (MZ-1M01)


3/30/2013

[VM/DATAREC] fix issue that sample number in recorded wav file header is 0
[VM/DATAREC] improve recording wav file
[VM/DATAREC] improve wave shaper function to support dB-BASIC
[VM/EVENT] fix issue that continuous event causes invalid event clock
[VM/Z80PIO] support handshake mode

[MZ2200/MEMORY] support m1 wait when ipl rom is selected
[MZ2200/MEMORY] support vram access wait
[MZ2200/MZ1R13] fix address increment


3/29/2013

[MZ2200] support quick disk drive (MZ-1E18 and MZ-1F11)
[MZ2200/MZ1R12] support to load MZ-1E18 ipl rom image
[MZ2200/MZ1R13] support to switch kanji/dictionary roms


3/28/2013

[WINMAIN] fix to support max 30 screen resolutions

[VM/DATAREC] support wave shaper function
[VM/EVENT] fix not to skip frames when the sound is outputted


3/23/2013

[VM/I8080] support disassembler

[FP200] support CASIO FP-200


3/21/2013

[VM/DATAREC] fix to skip the fact chunk in wave file header

[MZ80B] support SHARP MZ-80B
[MZ2200] support SHARP MZ-2200


2/26/2013

[WINMAIN] destry window before emulation core is released

[PC8801MA/PC88] fix text attributes


2/7/2013

[EMU/WIN32] remove the function to play media files

[VM/DATAREC] support fast forward and rewind
[VM/DATAREC] support playing wav file
[VM/HD146818P] fix to restart timer event when date/time is modified
[VM/MSM58321] fix to restart timer event when date/time is modified
[VM/RP5C01] fix to restart timer event when date/time is modified
[VM/UPD1990A] fix to restart timer event when date/time is modified
[VM/UPD4990A] fix uPD1990A compatible mode
[VM/Z80] revert modifying clocks for interrupt in mode2

[FMR30/RTC] fix to restart timer event when date/time is modified
[HC40/IO] fix to restart timer event when date/time is modified
[HC80/IO] fix to restart timer event when date/time is modified
[MZ2500/CASSETTE] support playing a music cassette tape
[MZ2500/CASSETTE] support load/save a data cassette tape
[MZ2500/CASSETTE] support fast forward and rewind a cassette tape
[X07/IO] fix to restart timer event when date/time is modified
[X1TURBO/SUB] fix to restart timer event when date/time is modified
[X1TURBO/SUB] support fast forward and rewind a cassette tape

[TOOL/MZ2500] add new tool to cleanup the cassette tape for APSS


1/23/2013

[WINMAIN] support drag & drop a cart or disk image files

[VM/HD146818P] support modifying the date and time
[VM/MSM58321] renamed from RTC58321 to MSM58321
[VM/MSM58321] support modifying the date and time
[VM/MSM58321] support busy flag and base signal register
[VM/MSM58321] remove ugly functions for FMR-50/60
[VM/MS5832] removed and joined to MSM58321
[VM/RP5C01] support modifying the date and time
[VM/RP5C15] removed and joined to RP5C01
[VM/UPD1990A] support modifying the date and time
[VM/UPD1990A] remove ugly functions for PC-9801/PC-98LT
[VM/UPD4991A] support modifying the date and time
[VM/Z80] revert previous modification
[VM/Z80] modify clocks for interrupt in mode2

[FM16PI] replace rtc chip from msm5832 to rtc58321
[FMR30/RTC] support modifying the date and time
[FMR50/TIMER] support rtc with standard signal connections
[HC40/IO] support modifying the date and time
[HC80/IO] support modifying the date and time
[PC9801] support rtc with standard signal connections
[PC9801/DISPLAY] initialize year data in memory switch
[PC98LT/CALENDAR] support rtc with standard signal connections
[PC100] fix rtc signal connection and now rtc works fine
[PCENGINE] fix to check the selected cart is for super grafx
[X07/IO] support modifying the date and time
[X1TURBO/SUB] support modifying the date and time


1/18/2013

[VM/DISK] fix to always save the converted disk image
[VM/Z80] revert reimplemented Z80 core based on MAME 0.145

[PC8801MA/PC88] support n80 format tape image


12/29/2012

[EMU/WIN32] support joysticks with more than 4 buttons
[EMU/WIN32] support new function to get crc32 value

[VM/DISK] fix make_track() to consider the media type
[VM/DISK] fix teledisk/imagedisk converter to get the correct media type
[VM/UPD765A] fix read diagnotics to start reading at the top of 1st sector data

[FAMILYBASIC/PPU] fix crash issue in ppu
[PC8001MK2SR] support NEC PC-8001mkIISR
[PCENGINE] support NEC-HE PC Engine / SuperGrafx


10/25/2012

[PC8801MA/PC88] fix dma wait cycles on V1S mode


10/23/2012

[VM/HUC6280] reimplement based on MAME 0.147
[VM/I286] reimplement based on MAME 0.147
[VM/I386] reimplement based on MAME 0.147

[FAMILYBASIC/MEMORY] fix joypad status
[PC8801MA/PC88] fix video memory wait on V1S mode
[X1TWIN/PCE] reimplement vdc based on MESS 0.147


8/18/2012

[EMU/WIN32] support to switch GDI/Direct3D9

[VM/UPD7220] add get_start() function
[VM/YM2203] support mamefm.dll(V1)

[PC8801MA/PC88] fix text attributes based on m88
[PC8801MA/PC88] fix to update memory wait in reset() 
[PC9801/DISPLAY] fix to check gdc start status


3/20/2012

[EMU/WIN32] fix not to render screen to Direct3D9 buffer while recording video

[VM/DEVICE] add new virtual function to nitify ei opecode is done on cpu
[VM/YM2151] fix to raise/clear irq line when it is changed as level signal
[VM/YM2203] fix to raise/clear irq line when it is changed as level signal
[VM/Z80] fix to notify ei opecode is done on z80 core

[PC8801MA/PC88] fix sound irq based on m88 for Lipstick Adv and Re-Fight


3/15/2012

[EMU/WIN32] fix to renew vm class instance to change cpu clock in reset()

[PC8801MA/PC88] support data recorder
[PC8801MA/PC88] fix not to show pallete#0 color when graph screen is disabled
[PC8801MA/PC88] fix to recognize ctrl + comma/period as numpad comma/period


3/6/2012

[WINMAIN] fix to reset timing controls when run any extra frames to fill sound buffer
[EMU/WIN32] fix to stretch offscreen buffer in both window mode and fullscreen mode
[EMU/WIN32] fix to call ReleaseDC() to release the device context
[EMU/WIN32] fix to call SelectObject() to select the old hBmp before release the DIBSection
[EMU/WIN32] fix to start play sound buffer when virtual machine is driven
[EMU/WIN32] fix to use constant threshold for joystick direction values
[EMU/WIN32] support table to convert given keycodes from winmain
[EMU/WIN32] fix to initialize d88 multi volume handler

[VM/DEVICE] add virtual function to fetch opecode
[VM/FMGEN] fix to give the advanced time with chip clock, not usec
[VM/YM2151] fix to initialize register #29 to enable only timer interrupt
[VM/YM2151] fix to update fmgen count when read/write opm registers
[VM/YM2151] fix to update fmgen count with chip clocks
[VM/YM2203] fix to update fmgen count when read/write opn(a) registers
[VM/YM2203] fix to update fmgen count with chip clocks
[VM/Z80] fix to use new fetch_op() function to fetch opecode from memory bus

[PASOPIA] support floppy drives by Mr.zak
[PASOPIA/DISPLAY] fix attribute and display mode by Mr.zak
[PASOPIA/MEMORY] fix vram access via pio by Mr.zak
[PASOPIA/PAC2] support kanji rom and joystick pac by Mr.zak
[PASOPIA/RAMPAC2] support to change file to load/save rampac2 image by Mr.zak

[PASOPIA7] fix memory bank switch by Mr.zak
[PASOPIA7/RAMPAC2] support to change file to load/save rampac2 image by Mr.zak

[PC8801MA] change rtc device type from uPD1990A to uPD4990A
[PC8801MA/PC88] support bus mouse
[PC8801MA/PC88] change memory wait cycles
[PC8801MA/PC88] fix not to draw cursor before cursor position is updated
[PC8801MA/PC88] fix to refer text attributes for hireso screen
[PC8801MA/PC88] fix a ugly patch for attributes issue for RST Ongaku Disk 12


2/22/2012

[WINMAIN] add codes to check memory leaks in debug build
[VM/*] fix memory leaks

[MULTI8/CMT] fix not to refer other device in release() function
[MZ1500/QUICKDISK] fix not to refer other device in release() function
[PC9801/CMT] fix not to refer other device in release() function
[TK80BS/CMT] fix not to refer other device in release() function


2/21/2012

[PC8801MA/PC88] update memory wait cycles


2/20/2012

[WINMAIN] support d88 disk image with multi voluemes
[EMU/WIN32] update screen manager with Direct3D9

[VM/DISK] support d88 disk image with multi voluemes

[JX/DISPLAY] fix not to render screen just after screen size is changed
[PC8801MA/PC88] fix to render 640x400 graph screen refering text attributes
[PC8801MA/PC88] update memory/dma wait cycles based on m88 and QUASI88


2/16/2012

[WINMAIN] simplify timing controls
[EMU/WIN32] simplify screen manager
[EMU/WIN32] fix to capture the rotated screen in vertical screen mode

[VM/Z80] reimplement based on MAME 0.145 Z80 core

[PC8801MA] support NEC PC-8801MA
[PC8801MA/PC88] fix to initialize main ram pettern
[PC8801MA/PC88] fix text window
[PC8801MA/PC88] fix to clear vram bank when alu is active
[PC98DO] remove dictionary rom, joystick and opna sound


2/13/2012

[PC98DO/PC88] fix to show opn busy flag at the first access (for ALPHA)

[VM/EVENT] fix not to clear sound buffer index in reset function
[VM/I8255] fix not to clear output signals in default setting


2/11/2012

[PC98DO/PC88] fix to select hireso screen only in monochrome mode
[PC98DO/PC88] fix crtc registers
[PC98DO/PC88] fix the character scan lines and screen height again
[PC98DO/PC88] fix to consider the number of attributes data
[PC98DO/PC88] add a ugly patch for attributes issue for alpha

[VM/I8255] fix to clear output signals when control register is written
[VM/Z80] fix not to output debug log for continuously executed halt command


2/8/2012

[EMU/WIN32] fix to release all pressed keys when the main window lost focus

[PC98DO/PC88] fix hireso/mono graphic screen renderer
[PC98DO/PC88] support dictionary rom
[PC98DO/PC88] fix the character scan lines and screen height again


2/7/2012

[VM/UPD765A] fix the wait time to finish seek command

[PC9801/DISPLAY] support semi graphics on text screen


2/6/2012

[VM/YM2151] fix to raise irq when timer is expired before it is reset
[VM/YM2203] support YM2608(OPNA)
[VM/YM2203] fix to raise irq when timer is expired before it is reset

[PC98DO/PC88] fix to clear text screen when dma overrun occurs
[PC98DO/PC88] fix to refer same palettes in 8/512 color mode
[PC98DO/PC88] support OPNA sound (though PC-98DO does not support OPNA...)
[PC98DO/PC9801] support OPNA sound (though PC-98DO does not support OPNA...)


2/2/2012

[VM/Z80] fix to consider meaningless $dd/$ed/$fd

[PC9801] disable i/o port to change mouse irq frequency
[PC9801E] disable i/o port to change mouse irq frequency
[PC98DO/PC88] fix to raise vrtc irq when crtc is not started


1/31/2012

[VM/UPD1990A] support uPD4990A

[PC98DO/PC88] support caps/kana lock
[PC98DO/PC88] fix to reverse strobe signal to rtc


1/30/2012

[PC98DO/PC88] fix text attributes again
[PC98DO/PC88] fix not to raise irq when disk is changed


1/29/2012

[PC98DO/PC88] fix to canel the requested irq when it is masked
[PC98DO/PC88] fix text attributes


1/27/2012

[VM/DISK] fix the routine to check d88 format
[VM/EVENT] fix the event manager for sub cpu event timing


1/25/2012

[WINMAIN] support to specify the minimum window width

[EMU/WIN32] fix the routine to detect the shift and numpad keys are pressed

[VM/DISK] fix to check if the inserted disk image is really d88 format
[VM/EVENT] update event manager to check events in every cpu opecode
[VM/HUC6260] update cpu to run only one opecode and return clocks
[VM/I86] update cpu to run only one opecode and return clocks
[VM/I386] update cpu to run only one opecode and return clocks
[VM/M6502] update cpu to run only one opecode and return clocks
[VM/MC6800] update cpu to run only one opecode and return clocks
[VM/MC6809] update cpu to run only one opecode and return clocks
[VM/TMS9995] update cpu to run only one opecode and return clocks
[VM/UPD765A] fix to get the side number from hdu param in SHARP MZ-3500 case
[VM/UPD765A] fix index hole signal width and frequency
[VM/UPD7801] update cpu to run only one opecode and return clocks
[VM/Z80] update cpu to run only one opecode and return clocks

[HC80/IO] fix the memory access violation issue when run without rom images
[PC100/IOCTRL] move keyborad initialization from intialize() to reset()
[PC98DO] raise irq when disk is inserted or ejected
[PC98DO/MOUSE] fix not to clear the registered event when machine is reset
[PC98DO/PC88] fix extended vram selection mode
[PC98DO/PC88] fix the key code table for ins/del
[PC98DO/PC88] fix to convert the pressed ins/f6-10 keys to shift + del/f1-f5
[SC3000] support SF-7000
[SC3000] fix to negate the motor on/off signal from pio pc1


1/18/2012

[EMU/WIN32] support to detect the shift and numpad keys are pressed

[VM/I8080] fix to refer read_data8w() to fetch opcode if memory wait is active
[VM/UPD765A] fix to accept seek command before other seek is not finished
[VM/UPD765A] fix to accept tc in result phase after read/write commands
[VM/YM2203] fix to read the input port value though the port mode is output
[VM/Z80] fix to refer read_data8w() to fetch opcode if memory wait is active

[PC98DO/PC88] support joystick (though PC-98DO does not support joystick...)
[PC98DO/PC88] fix i/o port to read expanded ram selection in $e2
[PC98DO/PC88] fix i/o port to read 15KHz/24KHz monitor type in $40
[PC98DO/PC88] fix hireso/mono graphic screen renderer
[PC98DO/PC88] support memory access wait (temporary)
[PC98DO/PC88] fix to raise busreq while dma is running in V1(S)/N mode
[VM/X1TWIN] remove the routine to detect the shift and numpad keys are pressed


1/11/2012

[VM/HD46505] support to update the timing settings in the event manager
[VM/UPD7220] support to update the timing settings in the event manager

[VM/PC9801E] support to switch crt frequency
[VM/PC9801VM] support to switch crt frequency
[VM/PC98DO] support to switch crt frequency
[VM/X1TURBO] support to switch crt frequency


1/9/2012

[VM/DEVICE] add virtual function to get the id of parent event manager
[VM/EVENT] fix to notify the timing changes only to child devices

[PC9801E] support to switch cpu clocks
[PC9801VM] support to switch cpu clocks
[PC98DO] support to switch cpu clocks


1/7/2012

[VM/DEVICE] add virtual function to notify that timing settings are changed
[VM/EVENT] fix to notify to all devices when timing settings are changed
[VM/PC80S31K] add ugly patch to enable both #1 and #2 drives
[VM/UPD765A] fix that recalib is successfully done though disk is unformatted
[VM/YM2203] fix to update the period that fmgen is driven in vline
[VM/YM2151] fix to update the period that fmgen is driven in vline

[PC98DO/PC88] fix to connect opn irq line to the interrupt controller
[PC98DO/PC88] fix to initialize opn input ports
[PC98DO/PC88] fix to access high speed tvram through dma in V1(H)/V2 mode
[PC98DO/PC88] fix to draw text screen when crtc is already started
[PC98DO/PC88] fix the initial attribute before it is changed
[PC98DO/PC88] fix the character scan lines (temporary)
[PC98DO/PC88] support 2HD disks


1/5/2012

[VM/HD46505] fix the issue that vline event is not correctly registered
[VM/UPD765A] fix the issue that CP/M Plus does not boot correctly on QC-10


12/31/2011

[EMU/WIN32] support to change the frame timing by virtual machine

[VM/DEVICE] support multiple event manager
[VM/DISK] support to detect the disk ejection
[VM/EVENT] support multiple cpus with different clocks
[VM/HD46505] fix typo
[VM/I8237] support word transfer
[VM/I8259] fix to wait a few time to raise irq that imr is cleared
[VM/PC80S31K] support PC-80S31K floppy drives
[VM/UPD765A] support non dma mode
[VM/UPD765A] fix to clear irq signal when result pahse is finished
[VM/UPD765A] support irq/drq mask signals
[VM/UPD765A] support to detect the disk ejection
[VM/Z80] support NOP in IM0 interrupt

[FP1100] set correct sub cpu clock
[J3100] support TOSHIBA J-3100GT/SL (not work)
[MZ800] reset virtual machine when boot mode is changed
[PC9801] support 320KB floppy drives
[PC9801VM] support NEC PC-9801VM
[PC98DO] support NEC PC-98DO
[QC10] fix the issue that CP/M Plus does not boot correctly
[MZ2500/SASI] refine code


8/6/2011

[EMU/WIN32] render access lamp in emu class

[VM/MC6820] support MC6820 (partial)

[M5/CMT] support reset/halt key
[X1TURBO] fix i/o map for i8255 at 01a**h
[X1TURBO/IO] clear i/o tables to fix debug build issue


6/1/2011

[VM/BEEP] remove the routine to get frequency from the pulse count
[VM/MC6800] support MB8861

[HC20/MEMORY] implement some slave cpu commands
[PASOPIA7] fix signal connections from z80ctc to speaker


5/28/2011

[VM/MB8877] clear track register and index hole counter in reset()
[VM/MC6800] support MC6800/MC6801/HD6301 (based on MAME 0.142)
[VM/MC6809] support MC6809 (based on MAME 0.142)
[VM/Z80DMA] fix issues for X1/X1turbo games (thanks Y.S.)

[HC20] support EPSON HC-20
[PASOPIA] fix OA-BASIC issue


5/20/2011

[EMU/WIN32] support sound latency 50msec

[VM/DEVICE] add virtual function do_dma() for single mode dma
[VM/I8237] support single mode
[VM/UPD71071] support single mode
[VM/Z80DMA] fix issues for X1/X1turbo games (thanks Y.S.)
[VM/Z80DMA] support single mode
[VM/I86] call do_dma() in every machine cycle for single mode dma
[VM/I386] call do_dma() in every machine cycle for single mode dma
[VM/Z80] call do_dma() in every machine cycle for single mode dma

[MZ2800] support single mode dma
[MZ5500] support single mode dma
[PC9801] support single mode dma
[PC9801E] support single mode dma
[X1TURBO] support single mode dma


5/19/2011

[VM/EVENT] fix to check registered count for frame/vline events
[VM/EVENT] clear event counts before other devices are initialized
[VM/HD46505] fix to update sync signals in more precise timing
[VM/HD46505] support notifying vline event to other devices
[VM/Z80DMA] fix issues for X1/X1turbo games (thanks Y.S.)
[VM/Z80DMA] fix to return current count/address for init read sequence command
[VM/Z80DMA] fix do_dma() routine

[JX/DISPLAY] support high resolution screen (partial)
[JX/DISPLAY] support bankswitch for kanji rom and extended vram
[MZ800/DISPLAY] remove display class and combine to memory class
[MZ800/MEMORY] fix scroll registers
[X1TURBO/DISPLAY] remove crtc vblank/vsync signal generator


5/18/2011

[VM/DISK] fix dsk floppy disk image converter

[MZ800] support SHARP MZ-800
[MZ1500] support floppy disk drives


5/16/2011

[JX] fix memory map for kanji rom
[JX/DISPLAY] fix text screen renderer


5/14/2011

[VM/DISK] support dsk floppy disk image based on MESS formats/dsk_dsk.c
[VM/I8259] support poll command
[VM/I8259] update eoi command
[VM/MEMORY] return file size of loaded bios image
[VM/UPD765A] fix sence interrupt status result
[VM/UPD765A] fix not to clear exm bit in multi sector read/write
[VM/Z80CTC] fix not to reset time constant when channel is freezed
[VM/Z80DMA] fix transfer length when 0 is specified

[JX] support IBM Japan Ltd PC/JX
[PC9801] set media type for floppy drives
[X1TURBO/DISPLAY] wait next raster when pcg/cgrom is accessed
[X1TURBO/SUB] readjust the key repeat timing


5/4/2011

[EMU/WIN32] remove patch code for PV-2000 in input manager

[VM/DEVICE] add virtual functions for 16bit/32bit dma
[VM/I8259] refine code
[VM/IO] support standard d-ff register
[VM/IO] support 16bit/32bit dma functions
[VM/MB8877] change wait period for read/write from 100msec to 70msec
[VM/HD146818P] check address line in write access
[VM/UPD765A] check address line in write access
[VM/W3100A] check address line in write access
[VM/YM2203] disable status register for AY-3-8912

[MZ80K] refine driver and remove unused io class
[MZ2800] refine driver and remove unused calendar/timer classes
[X1TURBO] support dip-switch for monitor type selection
[X1TURBO/DISPLAY] fix vblank/vsync signals
[X1TURBO/IO] support standard d-ff register


4/27/2011

[COMMON] modify struct union 'pair'
[VM/EVENT] fix to get more precise cpu clocks
[VM/HUC6260] fix to get more precise cpu clocks
[VM/I8080] fix to get more precise cpu clocks
[VM/I86] fix i286 protected mode boundary check (from MESS)
[VM/I86] fix POP SP and POP ESP (from MESS)
[VM/I86] fix to get more precise cpu clocks
[VM/I386] fix to get more precise cpu clocks
[VM/M6502] fix to get more precise cpu clocks
[VM/TMS9995] fix to get more precise cpu clocks
[VM/UPD7801] fix to get more precise cpu clocks
[VM/Z80] fix to get more precise cpu clocks

[X1TURBO/DISPLAY] fix to get correct pcg address in hires screen mode


4/25/2011

[VM/MB8877] fix to wait 100msec to read/write just after seek command
[VM/Z80CTC] fix to initialize vector when reset device
[VM/Z80CTC] fix to copy time constant to counter just after reset command
[VM/Z80CTC] fix to clear pending irq when RETI opcode is detected
[VM/Z80CTC] fix to update int signal without checking the current signal
[VM/Z80DMA] fix to update int signal without checking the current signal
[VM/Z80PIO] fix to update int signal without checking the current signal
[VM/Z80SIO] fix to update int signal without checking the current signal


4/23/2011

[VM/DISK] fix to check disk type in teledisk converter
[VM/I86] reimplement based on MAME 0.142 80x86 core
[VM/I86] support 80186
[VM/MB8877] fix to clear drq/irq when status register is read
[VM/UPD71071] fix not to restart dma while dma is running
[VM/Z80CTC] fix to clear pending irq when control reg is updated
[VM/Z80DMA] fix not to restart dma while dma is running
[VM/Z80DMA] fix end of block condition
[VM/Z80DMA] fix to support auto restart

[X1TURBO/DISPLAY] fix vertical doubled character in hires mode
[X1TURBO/DISPLAY] fix black character renderer


4/15/2011

[VM/DEVICE] add virtual functions for i/o port with dma
[VM/DISK] support drive type
[VM/MB8877] add functions to get/set drive type
[VM/UPD765A] add functions to get/set drive type
[VM/Z80DMA] change transfer length when block length equals to 0

[X1TURBO] support 2HD floopy disk
[X1TURBO/FLOPPY] support to change the drive type


4/14/2011

[VM/DEVICE] add virtual functions for Z80 daisy chain definitions

[X1TURBO] support 2nd CZ-8BS1 for NRTDRV
[X1TURBO/DISPLAY] support black/transparency register
[X1TURBO/SUB] fix xfer key code
[X1TURBO/SUB] fix ctrl/shift/kana/caps/graph bits in $e6 command
[X1TURBO/SUB] fix write protected bit in $eb command


4/13/2011

[VM/Z80DMA] fix address step count (thanks Kale)


4/12/2011

[EMU/WIN32] fix repeat flag for caps/kana/kanji keys

[VM/DISK] fix not to write disk image when data is not modified
[VM/IO] support read/write interface for dma
[VM/Z80] fix disassembler
[VM/Z80DMA] support Z80DMA (based on MAME Z80DMA core)

[PC9801/CMT] support cmt interface
[X1TURBO] support SHARP X1turbo
[X1TURBO/DISPLAY] generate HD46505 vblank/vsync signals in display class
[X1TURBO/IO] support read/write interface with dma


4/7/2011

Fix typo (regist -> register, recieve -> receive)


4/6/2011

[EMU/WIN32] fix joystick manager

[VM/DISK] support standard disk image without format info
[VM/Z80SIO] fix abort/break flag
[VM/Z80SIO] fix not to load data before sync char is loaded

[MZ1500/QUICKDISK] fix unformat error issue
[X1TWIN] support to enable/disable CZ-8BS1
[X1TWIN/DISPLAY] fix cursor blink
[X1TWIN/DISPLAY] combine kanji class to refer the same font rom image
[X1TWIN/DISPLAY] refine code to support X1turbo series
[X1TWIN/MEMORY] refine code to support X1turbo series


4/2/2011

[X1TWIN/SUB] fix irq handling


4/1/2011

[EMU/WIN32] support stereo sound
[EMU/WIN32] fix joystick initialization

[VM/DATAREC] support to load wave file with 16bit/stereo and any frequency
[VM/DATAREC] support to load TAP tape images (used for SHARP X1 series)
[VM/DATAREC] support to rewind tape image
[VM/EVENT] support stereo sound
[VM/FMGEN] fix timer not to cause overflow
[VM/FMGEN] support interface to read int signal
[VM/SN76489AN] fix mixer issue that volume mixed by other device is doubled
[VM/YM2151] fix irq handling to refer int signal from fmgen
[VM/YM2203] fix irq handling to refer int signal from fmgen
[VM/Z80SIO] support monosync/bisync mode
[VM/Z80SIO] support auto enables bit in wr3
[VM/Z80SIO] support send break bit in wr5
[VM/Z80SIO] support sync/abort bit in rr0
[VM/Z80SIO] support signals to notify transmitt/recieve is done
[VM/Z80SIO] support sync signal (input/output)
[VM/Z80SIO] fix not to reset external signals

[MZ1500] support quick disk drive
[PC9801] support irq connection from PC-9801-26
[PC9801/DISPLAY] support 200 lines screen mode
[PC9801/JOYSTICK] support joystick
[X1TWIN] support CMT device
[X1TWIN/EMM] support 512kb emm board
[X1TWIN/MEMORY] fix memory mapping for ipl rom


2/16/2011

[EMU/WIN32] notify key repeat

[VM/YM2203] fix prescaler for AY-3-8190/8192
[VM/YM2151] fix typo

[X1TWIN] support fm sound card
[X1TWIN/DISPLAY] fix routine to render vertical doubled character
[X1TWIN/DISPLAY] render screen in each scan line
[X1TWIN/SUB] support pressing both shift and numpad key for XANADU
[X1TWIN/SUB] support key repeat
[X1TWIN/SUB] fix ctrl + '_'
[X1TWIN/SUB] fix $e6 command to return key code until it is released


1/26/2011

[EMU/WIN32] support capture screen

[VM/SN76489AN] support SN76489
[VM/SN76489AN] fix noise period

[X1TWIN/DISPLAY] fix not to update pcg addr frequently for Wibarm
[X1TWIN/SUB] fix to raise irq just after command with no results was processed
[X1TWIN/SUB] fix keycode read function
[X1TWIN/SUB] fix command processing period


1/21/2011

[EMU/WIN32] support output debug log to console

[VM/DEVICE] fix virtual functions for memory and i/o access with wait
[VM/MB8877] support output debug log
[VM/MB8877] support request cpu to output debug log when status is read
[VM/Z80] support variable m1 cycle wait
[VM/Z80] support disassembler to output executed mnemonics
[VM/Z80SIO] change delay timing for data transmitter

[X1TWIN] fix i/o map for display controller and text/attr vram
[X1TWIN/DISPLAY] fix routine to render vertical doubled character
[X1TWIN/DISPLAY] fix routine to get accessing vram address and raster
[X1TWIN/DISPLAY] fix graphic renderer to check view range in crtc registers
[X1TWIN/FLOPPY] fix not to stop motor of floppy drive
[X1TWIN/MEMORY] fix to wait 1 clock in m1 cycle when ipl rom is selected
[X1TWIN/SUB] fix not to raise irq before all data are recieved by main cpu
[X1TWIN/SUB] fix to exit interrupt automatically without reti
[X1TWIN/SUB] fix to raise obf when new command is processed
[X1TWIN/SUB] fix caps lock
[X1TWIN/SUB] remove game key read command because this is turbo feature


1/17/2011

[PV1000/VDP] fix pattern offset register for Dig-Dug and Space Panic


1/16/2011

[VM/YM2203] support AY-3-8190/8192
[VM/Z80SIO] fix transmit/status interrupt

[SCV/SOUND] support 2nd and 3rd square wave generators (by Mr.kazz)
[SCV/SOUND] fix not to accept new command before return ack (by Mr.kazz)
[MZ2500/CRTC] fix gfx plane mask register
[MZ2500/CRTC] fix scroll registers
[MZ2500/CRTC] fix to effect transparency register to outside of text region
[MZ2500/CRTC] support screen mask i/o signal
[MZ2500/CRTC] optimize screen rederer
[MZ2800/CRTC] fix gfx plane mask register
[MZ2800/CRTC] fix to effect transparency register to outside of text region
[MZ2800/CRTC] support screen mask i/o signal
[MZ2800/CRTC] optimize screen rederer
[X1TWIN/DISPLAY] support 4 rasters * 50 lines screen for XEVIOUS
[X1TWIN/SUB] fix get calender command


12/28/2010

[EMU/WIN32] support power off notification

[VM/DATAREC] support to load MZT/M12 tape images (used for SHARP MZ series)
[VM/I8251] support break signal
[VM/MB8877] change irq signal to low when new command is processed
[VM/MSM5832] support address write signal
[VM/Z80SIO] support cts/dcd signals

[FM16PI] support FUJITSU FM16pi
[SC3000/KEYBOARD] fix the issue that multiple keys in the same column cannot be pressed at the same time
[MZ1500] support z80sio for quick disk and rs-232c (not work)


9/29/2010

[VM/UPD765A] fix not to retry read id command
[VM/UPD765A] fix to return the result of non-seek commands for sence intstat
[VM/UPD765A] fix to update the data lost event when data is read/written

[PC9801] fix not to disable fdc i/o in the case fd bios roms are not loaded


9/20/2010

[VM/DEVICE] support interface for memory mappied i/o
[VM/I8237] fix bank register
[VM/I8253] fix counter latch before the counter update event is occured
[VM/MEMORY] support general memory bus
[VM/SN76489AN] fix noise generator
[VM/UPD765A] fix to wait 100usec before go to result phase
[VM/UPD7220] fix not to terminate write command after data is set
[VM/UPD7220] support interface to get the cursor address and top/bottom lines

[MZ3500/MAIN] update memory mapper
[MZ3500/SUB] implement serial i/o for keyboard
[PC9801] support NEC PC-9801
[PC9801E] support NEC PC-9801E/F/M


9/4/2010

[VM/EVENT] support to run extra frames for continuous sound
[VM/IO] support to register the return value
[VM/IO] refine i/o map registrations
[VM/UPD765A] support external drive selection
[VM/UPD765A] fix not to output index hole signal if disk is not inserted

[MZ1500] fix sound mask (for thunder force)
[MZ1500/DISPLAY] fix to refer bit3 of pcg attribute
[MZ1500/MEMORY] support pcg ram wait
[MZ1500/MEMORY] fix memory mapped i/o range
[MZ1500/RAMFILE] support ram file
[MZ3500] reimplement SHARP MZ-3500 (not work)
[PASOPIA7/IO] refine i/o map registrations
[PHC20] support SANYO PHC-20
[X1TWIN/IO] refine i/o map registrations


8/31/2010

[VM/UPD765A] support dack signal

[FP1100/SUB] support logic to clear vram
[FP1100/SUB] fix vram write access
[FP1100/SUB] fix screen renderer
[MZ1500] fix psg i/o addr
[MZ1500/DISPLAY] fix color palette and priority register


8/27/2010

[VM/AND] fix output signal when it is changed
[VM/OR] fix output signal when it is changed
[VM/NAND] fix output signal when it is changed
[VM/NOR] fix output signal when it is changed
[VM/NOT] fix output signal when it is changed
[VM/DEVICE] refine signal connections
[VM/DISK] support SEGA SF-7000 floppy disk image
[VM/EVENT] sync 2 or more cpus precisely
[VM/I8253] fix read both low and high counter
[VM/PCM1BIT] update to check on/off signal width in one sample
[VM/TMS9918A] fix screen mode selection
[VM/UPD765A] support reset signal
[VM/UPD765A] support index hole signal
[VM/Z80] revert reimplemented Z80 core (temporary)

[FM16PI] remove FUJITSU FM16pi skelton
[PC3200] remove SHARP PC-3200 skelton
[FP1100/MAIN] raise sub cpu's int2 at both L->H edge and H->L edge
[FP1100/SUB] add ugly patch to raise int2 when sub cpu recieve the command
[MZ80K] support SHARP MZ-80K
[MZ1200] support SHARP MZ-1200
[MZ700/MEMORY] init memory map when mzt image is loaded
[MZ700/MEMORY] support MZ700WIN's patch block when mzt image is loaded
[MZ1500] support SHARP MZ-1500 (QD is not supported yet)
[PASOPIA] fix signal connections around z80ctc
[SC3000] support SEGA SC-3000
[X1TWIN/SUB] fix sub cpu to check key release
[X1TWIN/DISPLAY] fix vertical/horizontal doubled character
[X1TWIN/DISPLAY] fix palette priority register


8/13/2010

[EMU/WIN32] reset virtual machine after emu class is initialized

[VM/M6502] support M6502 and N2A03
[VM/SN76489AN] fix mixer
[VM/YM2151] fix mixer
[VM/YM2203] fix mixer

[FAMILYBASIC] support Nintendo Family BASIC


8/9/2010

[EMU/WIN32] disable ALT short cut key

[VM/Z80] reimplement Z80 (based on MAME Z80 core)

[MAP1010/KEYBOARD] support keyboard
[MYCOMZ80A/KEYBOARD] reset key event counter


8/6/2010

[VM/MC6847] fix graphics mode
[VM/MC6847] check vram size in render routine

[MAP1010] support SEIKO MAP-1010 (not work)
[PHC25] fix psg i/o address
[PHC25] fix vsync/hsync bit in system port
[PHC25/JOYSTICK] support joystick
[PHC25/SYSTEM] fix vdp mode signals in system port


8/4/2010

[VM/MC6847] support MC6847
[VM/UPD7801] add wait signal
[VM/Z80] support raise irq by write_signal()

[FP1100] support CASIO FP-1100 (not work)
[PHC25] support SANYO PHC-25
[MULTI8/FLOPPY] fix floppy drive
[PV1000/PSG] fix psg frequency


6/4/2010

[EMU/WIN32] update screen stretch/rotation
[EMU/WIN32] support window x3 - x8 modes
[EMU/WIN32] support fullscreen mode with any resolutions
[EMU/WIN32] fix video recorder
[EMU/WIN32] hide menu bar in full screen mode
[EMU/WIN32] save opened file dir for common dialog's initial dir

[VM/UPD765A] fix result status for recalib/seek commands

[PV1000/PGS] support sound generation (based on MESS driver)
[PV1000/JOYSTICK] fix $fc status register


5/12/2010

[EMU/WIN32] remove Windows CE support
[EMU/WIN32] remove Direct3D support
[EMU/WIN32] remove waveOut api support
[EMU/WIN32] remove video capture support

[VM/DISK] support media type property
[VM/DISK] check if the current disk image is reopened
[VM/UPD7220] update csform/csrw commands
[VM/UPD7220] support unknown $5a command
[VM/UPD765A] support force ready signal for NEC PC-98 series
[VM/UPD765A] fix result status for recalib/seek commands
[VM/UPD764A] update hdu for sence device status command
[VM/UPD765A] raise interrupt when disk is inserted or ejected

[MZ2500/CRTC] remove super impose support
[PC98LT] support floppy drive
[PC98LT/BIOS] support pseudo disk bios to check the media type
[PC98LT/FLOPPY] remove unused io address for 1MB FDD I/F


12/31/2009

[YS6464A] support Shinko Sangyo YS-6464A


12/28/2009

[EMU/WIN32] support artwork, buttons and leds for single-board computers
[VM/I386] reimplement 80386 (based on MAME i386 core)
[VM/I8237] support increment mask of bank register
[VM/I8251] check number of sync characters
[VM/I8253] fix mask bit for output signal
[VM/UPD7220] check vram pointer is not null
[VM/Z80CTC] fix issue in the case sysclock is same as cpu clock

[BABBAGE2ND] support Gijutsu Hyron Sha Babbage-2nd
[N5200] support NEC N5200 (not work)
[FMR50] check crc32 of bios and set machine id
[FMR50] select cpu core i286/i386 refering machine id
[FMR50/MEMORY] support 32bit memory address
[MULTI8/DISPLAY] fix cursor end line
[PASOPIA/VM] fix order of z80family's daisy chain
[PASOPIA7/VM] fix order of z80family's daisy chain
[MYCOMZ80A/DISPLAY] fix semi graphics mode
[MYCOMZ80A/DISPLAY] fix cursor end line
[MYCOMZ80A/KEYBOARD] add key buffer


5/25/2009

[VM/UPD7220] fix initial vect params
[VM/Z80CTC] support different sysclock from cpu clock

[MYCOMZ80A] build without optimization for wince port
[MZ5500] set correct z80ctc sysclock
[QC10/DISPLAY] fix access violation problem


5/20/2009

[VM/MSM5832] fix build error

[MYCOMZ80A] support Japan Electronics College MYCOMZ-80A (my 30th emulator!)
[FMR50/CMOS] add experimental codes for FMR-CARD
[FMR50/MEMORY] add experimental codes for FMR-CARD


5/17/2009

[VM/I386] support 80386 (based on PCemu i386 core)
[VM/LS393] refine implements of output signal
[VM/MSM5832] support MSM5832
[VM/SN76489AN] support cs/we/data signal to be controlled without i/o bus
[VM/Z80CTC] refine implements of output signal

[MZ5500] fix ay-3-8912 address
[MZ6500] support SHARP MZ-6500
[FMR50/MEMORY] support address mask 20/24/32bit
[PC8201/KEYBOARD] support kana key (thanks Mr.apaslothy)
[X1TWIN/SUB] fix key matrix


4/9/2009

[COMMON] modify definition of uint64 and int64
[VM/DEVICE] support 32bit i/o bus
[VM/IO] support 32bit i/o bus

[PC8201] support PC-8201A (by Mr.apaslothy)
[PC8201/LCD] support command $3a,$3b,$3e,$3f,$7e,$be and $fe (by Mr.apaslothy)


4/5/2009

[COMMON] define pair struct
[VM/I8155] fix build error
[VM/UPD1990A] fix shift register

[PC98LT] fix signal connection from upd1990a to i8255
[X1TWIN] fix key matrix
[PC8201] support NEC PC-8201


4/1/2009

[COMMON] define uint64 and int64
[EMU/WIN32] support 1024x768 and 1280x1024 full-screen mode
[VM/DEVICE] support 32bit memory bus
[VM/DISK] detect disk is changed
[VM/EVENT] remove hsync event
[VM/EVENT] initialize sound buffer before reset
[VM/EVENT] multi instance free
[VM/HD46505] support vblank signal
[VM/HD63484] support HD63484 (based on MAME HD63484 core)
[VM/HUC6260] support HuC6260 (based on Ootake cpu core)
[VM/I8155] add mask bit for output signal
[VM/I8253] add mask bit for output signal
[VM/I86] fix to refer 16bit i/o bus
[VM/UPD1990A] support TP signal
[VM/YM2151] support YM2151 (use fmgen core by Mr.CISC)

[MULTI8/DISPLAY] check R8:DISPTMG on HD46505
[MZ2500/JOYSTICK] fix full-auto timing
[MZ2800/JOYSTICK] fix full-auto timing
[PASOPIA/DISPLAY] check R8:DISPTMG on HD46505
[PASOPIA7/DISPLAY] check R8:DISPTMG on HD46505
[FMR60] support FUJITSU FMR-60
[X1TWIN] support SHARP X1twin


2/8/2009

[EMU/WIN32] support window minimize button

[FMR30/MEMORY] optimize memory bank switch
[FRM50/BIOS] fix disk bios $fa
[FMR50/BIOS] support memcard
[FRM50/BIOS] support power management bios
[FMR50/FLOPPY] fix disk status register
[FMR50/KEYBOARD] fix kbint register
[FMR50/MEMORY] support line/logical operations circuit
[FMR50/MEMORY] support 40chars/20lines text screen mode
[FMR50/MEMORY] refer cursor end line register on hd46505
[FMR50/TIMER] fix timer interrupt cause register


1/16/2009

[EMU/WIN32] change screen buffer type from uint16 to user-defined type
[EMU/WIN32] change screen buffer depth from RGB555 to RGB888 on windows pc
[VM/I8155] support i8155

[FMR50/MEMORY] optimize memory bank switch

*) change the compiler from vs2005 to vs2008


1/2/2009

[EMU/WIN32] support power off requested by vm
[VM/I8237] support external bank register
[VM/I8251] support txrdy/txempty/dsr/dtr signals
[VM/I8251] support loop back
[VM/I8251] don't reset dsr bit of status register
[VM/I8253] don't latch count before previously latched count is not read
[VM/I8254] support i8254 based on i8253
[VM/I86] fix push sp in 8086 mode
[VM/I86] fix a20 line in fetch functions
[VM/IO] change class name from IO8 to IO
[VM/IO] support 16bit i/o bus

[FMR30] support FUJITSU FMR-30
[FMR50/MEMORY] support power off bit on $20


12/26/2008

[EMU/WIN32] support kana-characters on auto key function
[VM/DISK] support ImageDisk floppy disk image
[VM/I8085] support 8080/8085 (based on MAME 8080/8085 core)
[VM/I86] change class name from X86 to I86

[MULTI8/KEYBOARD] fix the problem that cannot input the kana-character "ｨ"
[TK80] change cpu core from z80 to 8080
[TK80/MEMORY] change user-defined rom address to $0c00-$7dff


10/17/2008

[EMU/WIN32] fix key notification for caps/kana/kanji
[VM/X86] optimize the pseudo bios call by interrupt

[FMR50/BIOS] support scsi hard drive
[FMR50/BIOS] support pseudo bios
[FMR50/BIOS] support disk bios $FA
[FMR50/BIOS] support cmos/wait bios call
[FMR50/FLOPPY] support disk change register
[FMR50/KEYBOARD] support key repeat
[FMR50/MEMORY] fix vram bank switch in 200line screen mode
[FMR50/MEMORY] support reading ank/kanji rom
[HC40/IO] fix caps toggle problem
[HC80/IO] fix caps toggle problem
[PC98HA/KEYBOARD] fix kana toggle problem
[TK80/DISPLAY] change 8-seg LED color
[TK80/KEYBOARD] change key assign
[TK80/MEMORY] change rom size for COMPO BS/80
[TK80/MEMORY] support user-defined rom for $0800-$7dff


10/11/2008

[FMR50] fix i/o address of pit and crtc
[FRM50/MEMORY] fix busy status of line renderer
[FMR50/MEMORY] draw cursor on text screen
[FMR50/MEMORY] support cg screen


10/10/2008

[FMR50/BIOS] support disk bios
[FMR50/KEYBOARD] support keyboard
[MZ700/MEMORY] change EMM memory size for Windows CE


10/6/2008

[EMU/WIN32] fix the problem when new file path is specified
[EMU/WIN32] support 96khz sound

[VM/DATAREC] support trigger signal
[VM/DATAREC] output remote signal
[VM/I8253] fix mode3 output signal
[VM/PCM1BIT] support LPF
[VM/UPD765A] fix AT bit in the result of seek command
[VM/X86] support pseudo bios call

[MZ700] support mzt/m12 file
[MZ700] support datarec control signals
[MZ700] fix vsync/hsnyc timing
[MZ700/MEMORY] support memory wait
[TK80BS] support circuits on TK-80 main board
[TK80BS] support 2ch sound (PC1 and PC2 of 8255)
[TK80BS/MEMORY] support save/load ram image
[TK80BS/MEMORY] fix interrupt address
[TK80BS/KEYBOARD] fix key map for kana chars


8/27/2008

[EMU/WIN32] fix build problem for Windows CE

[VM/I8255] support mode1
[VM/I8259] clear irr bit if the request signal is changed to low level
[VM/UPD1990A] support i/o coonection interface
[VM/X86] fix interrup status
[VM/X86] fix pop es on 80286

[MZ700] fix vsync/hsnyc timing
[MZ700/MEMORY] support 16MB EMM board
[PC98LT] support PC-98LT
[TK80BS] support TK-80BS (COMPO BS/80)


8/19/2008

[VM/UPD765A] fix the problem that data lost occurs after the result phase
[VM/UPD765A] fix CB bit in the status register in sence intstat command
[VM/UPD765A] fix AT bit in the result of seek command

[PC100/CTRC] support monochrome screen mode
[PC100/CRTC] fix palette registers
[PC100/IOCTRL] fix keyboard event
[PC100/IOCTRL] support keyboard reset
[PC100/IOCTRL] fix keyboard initialize data


8/16/2008

[EMU/WIN32] support rotate screen
[EMU/WIN32] fix build problem for Windows CE

[VM/BEEP] more clear beep generation for the constant frequency
[VM/BEEP] fix mute logic
[VM/DEVICE] return address for unassigned I/O port
[VM/EVENT] fix crash problem in the initialization
[VM/I8251] fix PE bit in the status register
[VM/I8253] check edge of the input signal
[VM/I8253] fix gate signal
[VM/RTC58321] support i/o coonection interface
[VM/UPD4991A] modify i/o connection interface
[VM/UPD4991A] fix year data
[VM/UPD765A] support drq line delay

[PC98HA] support NEC PC-98HA
[PC100] support NEC PC-100 (not work)
[MZ700] fix sound noise problem
[MZ700/MEMORY] support EMM memory
[MZ2500/TIMER] modify 8253 gate control


6/11/2008

[EMU/WIN32] open command line as cart or disk file path
[EMU/WIN32] convert file path to full and long file path

[VM/AND/OR/NAND/NOR] support and/or/nand/nor gates
[VM/DATAREC] output low signal when the tape is closed
[VM/MB8876] support motor on/off signal
[VM/PCM1BIT] support on/off signal
[VM/PCM1BIT] support high quality sound
[VM/RTC58321] support RTC58321
[VM/UPD4991A] support uPD4991A
[VM/UPD765A] fdc status patch for MZ-3500
[VM/X86] fix freeze problem that some opecodes did not decrease the clock
[VM/Z80] return busack signal whe busreq occurs

[FMR50] support FUJITSU FMR-50 (not work)
[MZ700] support SHARP MZ-700
[MZ3500] support SHARP MZ-3500 (not work)
[HC80/IO] support intelligent ram disk (by Mr.Dennis Heynlein)


4/22/2008

[VM/LS244] support 74LS244/245
[VM/UPD1990A] support uPD1990A
[VM/X86] fix hlt
[VM/X86] support busreq
[VM/Z80] don't reset busreq in reset()

[MZ5500/KEYBOARD] support communication timeout


4/16/2008

[VM/UPD7220] support pitch command
[VM/UPD7220] fix vecte command in the case R=C=T=L=0 (pset)
[VM/UPD765A] fix read id command

[MZ5500/DISPLAY] support window controller
[MZ5500/DISPLAY] support 320x200, 320x400, 640x200 mode
[MZ5500/DISPLAY] support color palette
[MZ5500/DISPLAY] support b/w mode
[MZ5500/DISPLAY] support plane priority
[MZ5500/KEYBOARD] support algo key
[MZ5500/SYSPORT] support nmi reset
[QC10/DISPLAY] support floppy drive access lamp


4/14/2008

[MZ5500/KEYBOARD] support keyboard and mouse


4/12/2008

[VM/LS393] support 74LS393
[VM/RP5C01] support RP-5C01
[VM/UPD7220] fix pset function
[VM/UPD7220] notify vsync
[VM/UPD765A] check sector id strictly

[MZ5500] support SHARP MZ-5500


4/7/2008

[EMU/WIN32] support the screen size changing requested by the virtual machine

[VM/MZ2800] support z80sio interrupt vector port


4/3/2008

[VM/I8259] fix the cascade mode condition
[VM/UPD7220] fix low/high byte condition in dma commands
[VM/UPD7220] check the param count in fifo buffer in sync/vectw commands
[VM/UPD7220] get mod param in write command with no params
[VM/UPD7220] check mod param in vect/char drawing commands
[VM/UPD7220] check dir param in read/write command
[VM/UPD7220] support line drawing in vecte command
[VM/UPD7220] update ead/dad after drawing commands
[VM/UPD7220] fix lsb/msb order in pset function

[QC10] change the default dipswitch status
[QC10/DISPLAY] support color monitor subboard
[QC10/KEYBOARD] support SF1-SF4 keys
[QC10/MFONT] support multifonts rom card


3/22/2008

[VM/I8251] notify rxrdy is changed
[VM/TF20] fix the error result of read command

[HC80/IO] support HD6303 commands for microcassette (returns error code)
[HC80/IO] support HD6303 commands for serial i/o
[HC80/IO] support TF-20
[HC80/IO] support 8kb/16kb rom capsule
[HC80/IO] remove 8251 codes and use common 8251 class


3/20/2008

[EMU/WIN32] set DirectX9 graphics params on the screen menu

[HC40/IO] fix key buffers
[HC80] support EPSON HC-80/PX-8/Geneva


3/2/2008

[EMU/WIN32] support DirectX9 graphics
[EMU/WIN32] fix the window size problem of eHC-40


2/29/2008

[EMU/WIN32] more quick stretch screen
[EMU/CONFIG] divide the config version to the file version and the virtual machine version
[VM/TF20] support EPSON TF-20 terminal floppy drives

[HC40/IO] don't reset 7508 sub cpu when boot the system
[HC40/IO] support system reset
[HC40/IO] support buzzer partially (constant frequency)
[HC40/IO] support ART (8251 subset)
[HC40/IO] support TF-20 connected to ART


2/27/2008

[EMU/WIN32] Windows CE.NET binaries for GAPI are no longer supported
[EMU/WIN32] don't use StretchBlt

[HC40] support EPSON HC-40/PX-4
[QC10/MEMORY] fix the gate signal bit in $18
[QC10/MEMORY] fix the memory bank switch
[X07/IO] change LCD display color


2/20/2008

VC++ 6.0 project files are removed.

[VM/HD146818P] support sqw and periodic interrupt
[VM/HD146818P] clear IRQF/PF/AF/UF in the reg $0c when it is read
[VM/I8237] fix the build error
[VM/I8237] reimplement based on uPD71071
[VM/UPD7220] fix the build error
[VM/UPD7220] modify hblank/vsync event
[VM/UPD765A] lost data event occurs soon if dma request is not accepted
[VM/Z80SIO] change uPD7201 fifo buffer size

[QC10] support EPSON QC-10/QX-10
[RX78/VDP] fix the crash problem on Windows CE


2/11/2008

The interrupt logics are largely modified and are now very close to the real circuits.

In the older versions:
        - Each device requests the interrupt, sends the vector and goes into the in-service status only in the case that CPU can accept the interrupt.
        - These requests are always accepted and executed just now.
        - When the interrupt acception status is changed by the opecodes for example EI/RETI/RETN, CPU notifies to each devices to let them request the pending interrupt.
        - Realize Z80 family daisy chain by the pseudo device Z80PIC to control the priorities and receive RETI opecode.

This is because let CPU not to monitor the int-line in every opecodes.
But it causes some problems for example:
        - Timing problems.
        - End of Interrupt command in Z80SIO/uPD7201.
        - Using Z80 family devices with 80x86 and PIC8259.

In this release:
        - Each device can request the interrupt any time.
        - CPU checks the int-line in every opecodes.
        - When CPU accepts the request, CPU sends the ack signal to the device and receive the vector.
        - The device goes into the in-service status when receive the ack signal.
        - Realize Z80 family daisy chain by IEI/OEI signals supported in Z80 family devices.
        - Z80 checks the wired-or of int-lines from Z80 family devices.

[VM/DEVICE] modify virtual functions for interrupts
[VM/I8259] support the new interrupt logic
[VM/I8259] fix the crash problem
[VM/UPD7201] support uPD7201 (combined to Z80SIO class)
[VM/X86] support the new interrupt logic
[VM/Z80] support the new interrupt logic
[VM/Z80CTC] support the new interrupt logic
[VM/Z80PIO] support the new interrupt logic
[VM/Z80SIO] support the new interrupt logic
[VM/Z80SIO] support the End of Interrupt command
[VM/Z80SIO] fix the status register #0 (interrupt pending bit)
[VM/Z80SIO] fix the status register #2 (vector)
[VM/Z80PIC] removed

[MZ2500/CRTC] notify vsync signal by not edge but level
[MZ2500/INTERRUPT] support the new interrupt logic
[MZ2500/INTERRUPT] pending the interrupt request from vsync and timer
[MZ2500/INTERRUPT] remove the patches added in 2/11/2007


1/5/2008

[VM/BEEP] fix the crash problem when the frequency is constant
[VM/BEEP] support the interface to change the frequency constant

[X07/IO] support user defined keys
[X07/IO] support break key
[X07/IO] support line/circle commands
[X07/IO] support beep command
[X07/IO] support data recorder


12/31/2007

[COMMON/FIFO] support read_not_remove()
[VM/NSC800] fix NSC800

[X07] support CANON X-07


9/14/2007

[MZ2800/CRTC] fix read-modify-write registers


8/24/2007

[EMU/WIN32] check the status of both left and right ALT/CTRL/SHIFT keys

[MZ2800] ignore A15 of I/O port addr
[MZ2800/CTRL] support 65536colors graphic screen
[MZ2800/KEYBOARD] change keymap to newply support some keys
[MZ2800/MEMORY] fix the problem that symbol does not work on BASIC-M25


8/22/2007

[VM/RP5C15] fix the initial 12H/24H setting

[MZ2500/CRTC] optimize the screen renderer
[MZ2800/CRTC] support the 16/4096colors graphic screen
[MZ2800/CRTC] support the read modify write
[MZ2800/CRTC] support the hardware scroll
[MZ2800/CRTC] support the vram plane mask
[MZ2800/MEMORY] support the dictionary/kanji/pcg bank switch


8/19/2007

[VM/MB8877] fix the status for type4 command
[VM/UPD71071] support the base registers
[VM/X86] fix rep never to exit and re-fetch the opecode in the loop
[VM/X86] fix the modrm table

[MZ2800] add eVC4 project file
[MZ2800/CRTC] fix the test screen renderer
[MZ2800/CRTC] support 4096 color palette registers
[MZ2800/MEMORY] fix that ipl rom is initially mapped to $f0000-$fffff


8/16/2007

[VM/DEVICE] add the virtual functions for dma access
[VM/I8237] fix the typo
[VM/I8259] support the special fully nest mode
[VM/I8259] support the rotation of priorities
[VM/I8259] support the intrrupt request from Z80 family devices
[VM/IO8] support 16bit i/o adrress
[VM/MB8877] support the dma access
[VM/MB8877] support the irq and drq signals
[VM/RP5C15] support reading the values of banks #13/#14/#15
[VM/UPD71071] support uPD71071
[VM/X86] support 8086/V30/80286
[VM/YM2203] support the irq signal

[MZ2500] fix YM2203 PortB signal from RP-5C15
[MZ2800] support SHARP MZ-2800


7/23/2007

[VM/DATAREC] modify the frame skip condition (skip when the signal is changed)
[VM/TMS9918A] reimplement based on MAME 0.116
[VM/UPD7801] support the memory access wait

[PYUTA/MEMORY] modify the memory bank switch
[PYUTA/MEMORY] change the data bus from pull-down to pull-up
[SCV/MEMORY] support the memory access wait (now disabled)


7/16/2007

[VM/TMS9995] support TMS9995

[PYUTA] support TOMY PyuTa and PyuTa Jr.


2/11/2007

[COMMON] support auto key hitting from the clipboard
[COMMON] save and restore the window mode when the emulator is restarted
[VM/DEVICE] modify memory access wait
[VM/DEVICE] support i/o access wait
[VM/DISK] fix the crash problem when the invalid track number is set
[VM/HD46505] support HD46505
[VM/HD46505] fix the display/vsync/hsync signals timing
[VM/I8253] more precise signal timing in mode #2, #4 and #5
[VM/MB8877] support the access led status
[VM/PICM1BIT] support 1bit pcm
[VM/UPD765A] support the acces led status
[VM/YM2203] support the volume adjustment
[VM/Z80] modify memory access wait
[VM//Z80] support i/o access wait
[VM/Z80SIO] fix the recv and under-run interrupt flags
[VM/Z80SIO] fix the status affect vector
[VM/Z80SIO] cancel the interrupt request when read the recv buffer
[VM/Z80SIO] support the i/f to clear the recv buffer

[MULTI8/DISPLAY] remove HD46505 codes
[MULTI8/DISPLAY] draw the flopppy drive access led
[MZ2500] support 1bit pcm
[MZ2500] adjust fm/psg volume
[MZ2500] support i/o access wait
[MZ2500/CRTC] render screen with less cpu power
[MZ2500/CRTC] draw the floppy drive access led
[MZ2500/INTERRUPT] reimplement interrupt handler with the common Z80PIC class
[MZ2500/INTERRUPT] add the patch for GALAGA, LAYDOCK, THEXDER, MULTIPLAN, Super Shunbou, Wizardry and Ys3
[MZ2500/MEMORY] modify memory access wait
[MZ2500/MOUSE] clear Z80SIO recv buffer when send the mouse status
[PASOPIA] support OA-BASIC
[PASOPIA] support hsync signal
[PASOPIA/DISPLAY] remove HD46505 codes
[PASOPIA/MEMORY] fix the memory map $8000-$ffff
[PASOPIA7/DISPLAY] remove HD46505 codes
[PASOPIA7/DISPLAY] draw the flopppy drive access led
[PV1000] rewrite with the common event manager class
[PV1000/JOYSTICK] fix $fc status (not complete)
[PV1000/VDP] add the patch for SPACE PANIC


2/1/2007

[COMMON] ignore some warnings on Visual Studio 2005
[WIN32/SCREEN] support video recording
[WIN32/SOUND] record wave as 16bit, stereo (for TMPGEnc)
[WIN32/SOUND] dont use multi threading to recieve MM_WOM_DONE event
[WIN32/WCE] build 4 binaries (use GAPI or GDI, DirectSound or waveOut)
[VM/BEEP] modify beep sound generator for more stable frequency
[VM/DATAREC] auto stop at the end of tape image
[VM/DEVICE] add virtual functions to get the memory wait and passed clocks in cpu class
[VM/EVENT] more precise event timing refering the passed clock in cpu class
[VM/I8253] drive counter when it reaches the terminal count or read the count registers
[VM/I8253] more precise output signal timing
[VM/NSC800] suppor NSC800
[VM/Z80] fix the clocks for opecodes DD-CB-** and FD-CB-**
[VM/Z80CTC] drive counter when it reaches the terminal count or read the count registers
[VM/Z80PIC] accept the interrupt request when it is running

[MULTI8/HD46505] dont use hsync event and use the event callback to drive the hsync signal 
[MZ2500/CRTC] dont use hsync event and use the event callback to drive the hsync signal 
[MZ2500/MEMORY] support the memory wait in display period
[MZ2500/Z80PIC] accept the interrupt request when it is running 
[MZ2500/Z80PIC] recognize the i8253 clock signal as level, or edge only for MUDER CLUB, KUGYOKUDEN and RELICS 
[PASOPIA] reimplement EmuPIA under the common source code project 
[PASOPIA7/HD46505] dont use hsync event and use the event callback to drive the hsync signal 


12/31/2006

[WIN32] support DirectShow video capture devices (DX8 or later is required)
[WIN32] support Windows CE.net 4.x devices (use GAPI and waveOut APIs)
[VM] each device can get the cpu time
[VM/BEEP] modify beep sound generator for more stable frequency
[VM/Z80] support BUSREQ
[VM/Z80PIC] call do_reti() in the device that requested the interrupt
[VM/Z80SIO] suppor Z80SIO
[VM/DISK] support TeleDisk floppy disk image
[VM/EVENT] fix the problem in the case that the new event is registered in the event callback routine
[VM/I8253] drive the counter more accurate and less power

[MZ2500] reimplement EmuZ-2500 under the common source code project
[MZ2500] support the ethernet card function designed by Mr.Oh!Ishi
[MZ2500/CRTC] support the super impose function
[MZ2500/MEMORY] support VRAM access wait 


12/7/2006

Initial release