2 # src/Makefile.global.in
4 #------------------------------------------------------------------------------
5 # All PostgreSQL makefiles include this file and use the variables it sets,
6 # which in turn are put here by the configure script. There is no need for
7 # users to edit this file -- if it turns out to be necessary then that's a
10 # A makefile that includes this file needs to set the variable `subdir' to
11 # the relative path from the top to itself and `top_builddir' to the relative
12 # path from itself to the top before including this file. (The "top" is the
13 # parent directory of the directory this file is in.)
14 #------------------------------------------------------------------------------
17 ##########################################################################
21 .PHONY: all install install-strip installdirs uninstall clean distclean maintainer-clean distprep check installcheck maintainer-check coverage html man installcheck-parallel world install-world installcheck-world
23 # make `all' the default target
26 # Delete target files if the command fails after it has
27 # started to update the file.
30 # PostgreSQL version number
31 VERSION = @PACKAGE_VERSION@
32 MAJORVERSION = @PG_MAJORVERSION@
34 # Support for VPATH builds
35 vpath_build = @vpath_build@
36 abs_top_srcdir = @abs_top_srcdir@
38 ifneq ($(vpath_build),yes)
39 top_srcdir = $(top_builddir)
41 else # vpath_build = yes
42 top_srcdir = $(abs_top_srcdir)
43 srcdir = $(top_srcdir)/$(subdir)
47 vpathsearch = `for f in $(addsuffix /$(1),$(subst :, ,. $(VPATH))); do test -r $$f && echo $$f && break; done`
49 # Saved arguments from configure
50 configure_args = @configure_args@
53 ##########################################################################
55 # Installation directories
57 # These are set by the equivalent --xxxdir configure options. We
58 # append "postgresql" to some of them, if the string does not already
59 # contain "pgsql" or "postgres", in order to avoid directory clutter.
61 # In a PGXS build, we cannot use the values inserted into Makefile.global
62 # by configure, since the installation tree may have been relocated.
63 # Instead get the path values from pg_config.
67 # Note that prefix, exec_prefix, and datarootdir aren't defined in a PGXS build;
68 # makefiles may only use the derived variables such as bindir.
71 exec_prefix := @exec_prefix@
72 datarootdir := @datarootdir@
77 ifeq "$(findstring pgsql, $(datadir))" ""
78 ifeq "$(findstring postgres, $(datadir))" ""
79 override datadir := $(datadir)/postgresql
83 sysconfdir := @sysconfdir@
84 ifeq "$(findstring pgsql, $(sysconfdir))" ""
85 ifeq "$(findstring postgres, $(sysconfdir))" ""
86 override sysconfdir := $(sysconfdir)/postgresql
93 ifeq "$(findstring pgsql, $(pkglibdir))" ""
94 ifeq "$(findstring postgres, $(pkglibdir))" ""
95 override pkglibdir := $(pkglibdir)/postgresql
99 includedir := @includedir@
101 pkgincludedir = $(includedir)
102 ifeq "$(findstring pgsql, $(pkgincludedir))" ""
103 ifeq "$(findstring postgres, $(pkgincludedir))" ""
104 override pkgincludedir := $(pkgincludedir)/postgresql
111 ifeq "$(findstring pgsql, $(docdir))" ""
112 ifeq "$(findstring postgres, $(docdir))" ""
113 override docdir := $(docdir)/postgresql
119 localedir := @localedir@
123 # Extension makefiles should set PG_CONFIG, but older ones might not
125 PG_CONFIG = pg_config
128 bindir := $(shell $(PG_CONFIG) --bindir)
129 datadir := $(shell $(PG_CONFIG) --sharedir)
130 sysconfdir := $(shell $(PG_CONFIG) --sysconfdir)
131 libdir := $(shell $(PG_CONFIG) --libdir)
132 pkglibdir := $(shell $(PG_CONFIG) --pkglibdir)
133 includedir := $(shell $(PG_CONFIG) --includedir)
134 pkgincludedir := $(shell $(PG_CONFIG) --pkgincludedir)
135 mandir := $(shell $(PG_CONFIG) --mandir)
136 docdir := $(shell $(PG_CONFIG) --docdir)
137 localedir := $(shell $(PG_CONFIG) --localedir)
141 # These derived path variables aren't separately configurable.
143 includedir_server = $(pkgincludedir)/server
144 includedir_internal = $(pkgincludedir)/internal
145 pgxsdir = $(pkglibdir)/pgxs
148 ##########################################################################
152 # Records the choice of the various --enable-xxx and --with-xxx options.
154 with_perl = @with_perl@
155 with_python = @with_python@
156 with_tcl = @with_tcl@
157 with_openssl = @with_openssl@
158 with_ossp_uuid = @with_ossp_uuid@
159 with_libxml = @with_libxml@
160 with_libxslt = @with_libxslt@
161 with_system_tzdata = @with_system_tzdata@
162 with_zlib = @with_zlib@
163 enable_shared = @enable_shared@
164 enable_rpath = @enable_rpath@
165 enable_nls = @enable_nls@
166 enable_debug = @enable_debug@
167 enable_dtrace = @enable_dtrace@
168 enable_coverage = @enable_coverage@
169 enable_thread_safety = @enable_thread_safety@
171 python_includespec = @python_includespec@
172 python_libdir = @python_libdir@
173 python_libspec = @python_libspec@
174 python_additional_libs = @python_additional_libs@
175 python_configdir = @python_configdir@
176 python_majorversion = @python_majorversion@
177 python_version = @python_version@
179 krb_srvtab = @krb_srvtab@
182 TCL_LIB_FILE = @TCL_LIB_FILE@
183 TCL_LIBS = @TCL_LIBS@
184 TCL_LIB_SPEC = @TCL_LIB_SPEC@
185 TCL_INCLUDE_SPEC = @TCL_INCLUDE_SPEC@
186 TCL_SHARED_BUILD = @TCL_SHARED_BUILD@
187 TCL_SHLIB_LD_LIBS = @TCL_SHLIB_LD_LIBS@
189 PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
190 PTHREAD_LIBS = @PTHREAD_LIBS@
193 ##########################################################################
200 CPPFLAGS = @CPPFLAGS@
203 override CPPFLAGS := -I$(includedir_server) -I$(includedir_internal) $(CPPFLAGS)
205 override CPPFLAGS := -I$(top_srcdir)/src/include $(CPPFLAGS)
207 override CPPFLAGS := -I$(top_builddir)/src/include $(CPPFLAGS)
213 SUN_STUDIO_CC = @SUN_STUDIO_CC@
219 BISONFLAGS = @BISONFLAGS@ $(YFLAGS)
221 FLEXFLAGS = @FLEXFLAGS@ $(LFLAGS)
223 DTRACEFLAGS = @DTRACEFLAGS@
232 LDAP_LIBS_FE = @LDAP_LIBS_FE@
233 LDAP_LIBS_BE = @LDAP_LIBS_BE@
234 OSSP_UUID_LIBS = @OSSP_UUID_LIBS@
236 with_gnu_ld = @with_gnu_ld@
237 ld_R_works = @ld_R_works@
239 # We want -L for libpgport.a to be first in LDFLAGS. We also need LDFLAGS
240 # to be a "recursively expanded" variable, else adjustments to rpathdir
241 # don't work right. So we must NOT do LDFLAGS := something, meaning this has
242 # to be done first and elsewhere we must only do LDFLAGS += something.
244 LDFLAGS = -L$(libdir)
246 LDFLAGS = -L$(top_builddir)/src/port
250 LDFLAGS_EX = @LDFLAGS_EX@
251 # LDFLAGS_SL might have already been assigned by calling makefile
252 LDFLAGS_SL += @LDFLAGS_SL@
262 # quoted to protect pathname with spaces
265 PERL = $(missing) perl
267 perl_archlibexp = @perl_archlibexp@
268 perl_privlibexp = @perl_privlibexp@
269 perl_useshrplib = @perl_useshrplib@
270 perl_embed_ldflags = @perl_embed_ldflags@
277 MSGMERGE = @MSGMERGE@
280 XGETTEXT = @XGETTEXT@
285 PL_TESTDB = pl_regression
286 CONTRIB_TESTDB = contrib_regression
290 INSTALL = $(SHELL) $(top_srcdir)/config/install-sh -c
292 INSTALL_SCRIPT_MODE = 755
293 INSTALL_DATA_MODE = 644
294 INSTALL_PROGRAM = $(INSTALL_PROGRAM_ENV) $(INSTALL) $(INSTALL_STRIP_FLAG)
295 INSTALL_SCRIPT = $(INSTALL) -m $(INSTALL_SCRIPT_MODE)
296 INSTALL_DATA = $(INSTALL) -m $(INSTALL_DATA_MODE)
297 INSTALL_STLIB = $(INSTALL_STLIB_ENV) $(INSTALL_DATA) $(INSTALL_STRIP_FLAG)
298 INSTALL_SHLIB = $(INSTALL_SHLIB_ENV) $(INSTALL) $(INSTALL_SHLIB_OPTS) $(INSTALL_STRIP_FLAG)
299 # Override in Makefile.port if necessary
300 INSTALL_SHLIB_OPTS = -m 755
304 missing = $(SHELL) $(top_srcdir)/config/missing
307 STRIP_STATIC_LIB = @STRIP_STATIC_LIB@
308 STRIP_SHARED_LIB = @STRIP_SHARED_LIB@
312 have_docbook = @have_docbook@
313 COLLATEINDEX = @COLLATEINDEX@
314 DOCBOOKSTYLE = @DOCBOOKSTYLE@
318 XSLTPROC = @XSLTPROC@
326 ifeq ($(enable_coverage),yes)
327 # ccache loses .gcno files
328 export CCACHE_DISABLE = 1
333 DEF_PGPORT = @default_port@
334 WANTED_LANGUAGES = @WANTED_LANGUAGES@
337 ##########################################################################
339 # Additional platform-specific settings
342 # Name of the "template"
345 build_os = @build_os@
349 host_cpu = @host_cpu@
351 # Make HAVE_IPV6 available for initdb script creation
352 HAVE_IPV6= @HAVE_IPV6@
354 # The HP-UX port makefile, for one, needs access to this symbol
355 HAVE_POSIX_SIGNALS= @HAVE_POSIX_SIGNALS@
357 # This is mainly for use on FreeBSD, where we have both a.out and elf
358 # systems now. May be applicable to other systems to?
359 ELF_SYSTEM= @ELF_SYS@
361 # Backend stack size limit has to be hard-wired on Windows (it's in bytes)
362 WIN32_STACK_RLIMIT=4194304
364 # Pull in platform-specific magic
365 include $(top_builddir)/src/Makefile.port
367 # Set up rpath if enabled. By default it will point to our libdir,
368 # but individual Makefiles can force other rpath paths if needed.
371 ifeq ($(enable_rpath), yes)
376 ##########################################################################
378 # Some variables needed to find some client interfaces
381 # some contribs assumes headers and libs are in the source tree...
382 libpq_srcdir = $(includedir)
383 libpq_builddir = $(libdir)
385 libpq_srcdir = $(top_srcdir)/src/interfaces/libpq
386 libpq_builddir = $(top_builddir)/src/interfaces/libpq
389 # This macro is for use by libraries linking to libpq. (Because libpgport
390 # isn't created with the same link flags as libpq, it can't be used.)
391 libpq = -L$(libpq_builddir) -lpq
393 # If doing static linking, shared library dependency info isn't available,
394 # so add in the libraries that libpq depends on.
395 ifeq ($(enable_shared), no)
396 libpq += $(filter -lintl -lssl -lcrypto -lkrb5 -lcrypt, $(LIBS)) \
397 $(LDAP_LIBS_FE) $(PTHREAD_LIBS)
400 # This macro is for use by client executables (not libraries) that use libpq.
401 # We force clients to pull symbols from the non-shared library libpgport
402 # rather than pulling some libpgport symbols from libpq just because
403 # libpq uses those functions too. This makes applications less
404 # dependent on changes in libpq's usage of pgport. To do this we link to
405 # pgport before libpq. This does cause duplicate -lpgport's to appear
406 # on client link lines.
408 libpq_pgport = -L$(libdir) -lpgport $(libpq)
410 libpq_pgport = -L$(top_builddir)/src/port -lpgport $(libpq)
415 $(MAKE) -C $(libpq_builddir) all
418 $(MAKE) -C $(top_builddir)/src/port all
420 .PHONY: submake-libpq submake-libpgport
423 ##########################################################################
427 # This includes your local customizations if Makefile.custom exists
428 # in the source directory. This file doesn't exist in the original
429 # distribution so that it doesn't get overwritten when you upgrade.
431 # NOTE: Makefile.custom is from the pre-Autoconf days of PostgreSQL.
432 # You are liable to shoot yourself in the foot if you use it without
433 # knowing exactly what you're doing. The preferred (and more
434 # reliable) method is to communicate what you want to do to the
435 # configure script, and leave the makefiles alone.
437 -include $(top_srcdir)/src/Makefile.custom
439 ifneq ($(CUSTOM_INSTALL),)
440 INSTALL= $(CUSTOM_INSTALL)
443 ifneq ($(CUSTOM_CC),)
447 ifneq ($(CUSTOM_COPT),)
458 LDFLAGS += $(PROFILE)
462 ##########################################################################
464 # substitute implementations of C library routines (see src/port/)
465 # note we already included -L.../src/port in LDFLAGS above
469 LIBS := -lpgport $(LIBS)
471 # to make ws2_32.lib the last library, and always link with shfolder,
472 # so SHGetFolderName isn't picked up from shell32.dll
473 ifeq ($(PORTNAME),win32)
474 LIBS += -lws2_32 -lshfolder
477 # Not really standard libc functions, used by the backend.
481 ##########################################################################
483 # Global targets and rules
486 $(CPP) $(CPPFLAGS) -o $@ $<
489 $(GZIP) --best -c $< >$@
496 # Remake Makefile.global from Makefile.global.in if the latter
497 # changed. In order to trigger this rule, the including file must
498 # write `include $(top_builddir)/src/Makefile.global', not some
500 $(top_builddir)/src/Makefile.global: $(top_srcdir)/src/Makefile.global.in $(top_builddir)/config.status
501 cd $(top_builddir) && ./config.status src/Makefile.global
503 # Remake pg_config.h from pg_config.h.in if the latter changed.
504 # config.status will not change the timestamp on pg_config.h if it
505 # doesn't change, so as to avoid recompiling the entire tree
506 # unnecessarily. Therefore we make config.status update a timestamp file
507 # stamp-h everytime it runs, so that we don't trigger this rule everytime.
508 # (We do trigger the null rule for stamp-h to pg_config.h everytime; so it's
509 # important for that rule to be null!)
511 # Of course you need to turn on dependency tracking to get any
512 # dependencies on pg_config.h.
513 $(top_builddir)/src/include/pg_config.h: $(top_builddir)/src/include/stamp-h
515 $(top_builddir)/src/include/stamp-h: $(top_srcdir)/src/include/pg_config.h.in $(top_builddir)/config.status
516 cd $(top_builddir) && ./config.status src/include/pg_config.h
518 # Also remake ecpg_config.h from ecpg_config.h.in if the latter changed, same
520 $(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h: $(top_builddir)/src/interfaces/ecpg/include/stamp-h
522 $(top_builddir)/src/interfaces/ecpg/include/stamp-h: $(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h.in $(top_builddir)/config.status
523 cd $(top_builddir) && ./config.status src/interfaces/ecpg/include/ecpg_config.h
525 # When configure changes, rerun configure with the same options as
526 # last time. To change configure, you need to run autoconf manually.
527 $(top_builddir)/config.status: $(top_srcdir)/configure
528 cd $(top_builddir) && ./config.status --recheck
534 @$(MAKE) INSTALL_PROGRAM_ENV="STRIPPROG='$(STRIP)'" \
535 INSTALL_STLIB_ENV="STRIPPROG='$(STRIP_STATIC_LIB)'" \
536 INSTALL_SHLIB_ENV="STRIPPROG='$(STRIP_SHARED_LIB)'" \
537 INSTALL_STRIP_FLAG=-s \
541 ##########################################################################
543 # Automatic dependency generation
544 # -------------------------------
545 # When we configure with --enable-depend then we override the default
546 # compilation rule with the magic below. While or after creating the
547 # actual output file we also create a dependency list for the .c file.
548 # Next time we invoke make we will have top-notch information about
549 # whether this file needs to be updated. The dependency files are kept
550 # in the .deps subdirectory of each directory.
552 autodepend = @autodepend@
554 ifeq ($(autodepend), yes)
557 COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
564 # GCC allows us to create object and dependency file in one invocation.
566 @if test ! -d $(DEPDIR); then mkdir -p $(DEPDIR); fi
567 $(COMPILE.c) -o $@ $< -MMD -MP -MF $(DEPDIR)/$(*F).Po
571 # Include all the dependency files generated for the current
572 # directory. List /dev/null as dummy because if the wildcard expands
573 # to nothing then make would complain.
574 -include $(wildcard $(DEPDIR)/*.Po) /dev/null
577 clean distclean maintainer-clean: clean-deps
583 # When in automatic dependency mode, never delete any intermediate
584 # files automatically. Otherwise, the following could happen: When
585 # starting from a clean source tree, the first build would delete the
586 # intermediate file, but also create the dependency file, which
587 # mentions the intermediate file, thus making it non-intermediate.
588 # The second build will then need to rebuild the now non-intermediate
589 # missing file. So the second build will do work even though nothing
590 # had changed. One place where this happens is the .c -> .o -> .so
591 # chain for some contrib modules.
597 ##########################################################################
599 # Native language support
601 ifeq ($(enable_nls), yes)
602 ifneq (,$(wildcard $(srcdir)/nls.mk))
604 include $(top_srcdir)/src/nls-global.mk
610 ##########################################################################
614 # Explanation of involved files:
617 # foo.gcno gcov graph (a.k.a. "notes") file, created at compile time
618 # (by gcc -ftest-coverage)
619 # foo.gcda gcov data file, created when the program is run (for
620 # programs compiled with gcc -fprofile-arcs)
621 # foo.c.gcov gcov output file with coverage information, created by
622 # gcov from foo.gcda (by "make coverage")
623 # foo.c.gcov.out stdout captured when foo.c.gcov is created, mildly
625 # lcov.info lcov tracefile, built from gcda files in one directory,
626 # later collected by "make coverage-html"
628 ifeq ($(enable_coverage), yes)
630 # There is a strange interaction between lcov and existing .gcov
631 # output files. Hence the rm command and the ordering dependency.
633 gcda_files := $(wildcard *.gcda)
635 lcov.info: $(gcda_files)
637 $(if $^,$(LCOV) -d . -c -o $@ $(LCOVFLAGS))
639 %.c.gcov: %.gcda | lcov.info
640 $(GCOV) -b -f -p -o . $(GCOVFLAGS) $*.c >$*.c.gcov.out
642 coverage: $(gcda_files:.gcda=.c.gcov) lcov.info
643 $(if $(SUBDIRS),for dir in $(SUBDIRS); do $(MAKE) -C $$dir coverage || exit; done)
645 .PHONY: coverage-html
646 coverage-html: coverage
649 $(GENHTML) --show-details --legend --output-directory=coverage --title=PostgreSQL --num-spaces=4 --prefix=$(abs_top_srcdir) `find . -name lcov.info -print`
653 clean distclean maintainer-clean: clean-coverage
655 .PHONY: clean-coverage
658 rm -f *.gcda *.gcno lcov.info *.gcov *.gcov.out
661 # User-callable target to reset counts between test runs
663 rm -f `find . -name '*.gcda' -print`
665 endif # enable_coverage