1 /******************************************************************************
3 * Copyright (C) 1999-2012 Broadcom Corporation
5 * Licensed under the Apache License, Version 2.0 (the "License");
6 * you may not use this file except in compliance with the License.
7 * You may obtain a copy of the License at:
9 * http://www.apache.org/licenses/LICENSE-2.0
11 * Unless required by applicable law or agreed to in writing, software
12 * distributed under the License is distributed on an "AS IS" BASIS,
13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 * See the License for the specific language governing permissions and
15 * limitations under the License.
17 ******************************************************************************/
19 /******************************************************************************
21 * This file contains functions that handle BTM interface functions for the
22 * Bluetooth device including Rest, HCI buffer size and others
24 ******************************************************************************/
36 #include "device/include/controller.h"
37 #include "hci_layer.h"
40 #include "btcore/include/module.h"
41 #include "osi/include/thread.h"
43 #if BLE_INCLUDED == TRUE
45 #endif /* BLE_INCLUDED */
47 extern fixed_queue_t *btu_general_alarm_queue;
48 extern thread_t *bt_workqueue_thread;
50 /********************************************************************************/
51 /* L O C A L D A T A D E F I N I T I O N S */
52 /********************************************************************************/
54 #ifndef BTM_DEV_RESET_TIMEOUT
55 #define BTM_DEV_RESET_TIMEOUT 4
58 // TODO: Reevaluate this value in the context of timers with ms granularity
59 #define BTM_DEV_NAME_REPLY_TIMEOUT_MS (2 * 1000) /* 2 seconds for name reply */
61 #define BTM_INFO_TIMEOUT 5 /* 5 seconds for info response */
63 /********************************************************************************/
64 /* L O C A L F U N C T I O N P R O T O T Y P E S */
65 /********************************************************************************/
67 static void btm_decode_ext_features_page (UINT8 page_number, const BD_FEATURES p_features);
69 /*******************************************************************************
71 ** Function btm_dev_init
73 ** Description This function is on the BTM startup
77 *******************************************************************************/
78 void btm_dev_init (void)
80 #if 0 /* cleared in btm_init; put back in if called from anywhere else! */
81 memset (&btm_cb.devcb, 0, sizeof (tBTM_DEVCB));
84 /* Initialize nonzero defaults */
85 #if (BTM_MAX_LOC_BD_NAME_LEN > 0)
86 memset(btm_cb.cfg.bd_name, 0, sizeof(tBTM_LOC_BD_NAME));
89 btm_cb.devcb.read_local_name_timer =
90 alarm_new("btm.read_local_name_timer");
91 btm_cb.devcb.read_rssi_timer = alarm_new("btm.read_rssi_timer");
92 btm_cb.devcb.read_link_quality_timer =
93 alarm_new("btm.read_link_quality_timer");
94 btm_cb.devcb.read_inq_tx_power_timer =
95 alarm_new("btm.read_inq_tx_power_timer");
96 btm_cb.devcb.qos_setup_timer = alarm_new("btm.qos_setup_timer");
97 btm_cb.devcb.read_tx_power_timer = alarm_new("btm.read_tx_power_timer");
99 btm_cb.btm_acl_pkt_types_supported = BTM_ACL_PKT_TYPES_MASK_DH1 + BTM_ACL_PKT_TYPES_MASK_DM1 +
100 BTM_ACL_PKT_TYPES_MASK_DH3 + BTM_ACL_PKT_TYPES_MASK_DM3 +
101 BTM_ACL_PKT_TYPES_MASK_DH5 + BTM_ACL_PKT_TYPES_MASK_DM5;
103 btm_cb.btm_sco_pkt_types_supported = BTM_SCO_PKT_TYPES_MASK_HV1 +
104 BTM_SCO_PKT_TYPES_MASK_HV2 +
105 BTM_SCO_PKT_TYPES_MASK_HV3 +
106 BTM_SCO_PKT_TYPES_MASK_EV3 +
107 BTM_SCO_PKT_TYPES_MASK_EV4 +
108 BTM_SCO_PKT_TYPES_MASK_EV5;
112 /*******************************************************************************
114 ** Function btm_db_reset
116 ** Description This function is called by BTM_DeviceReset and clears out any
117 ** pending callbacks for inquiries, discoveries, other pending
118 ** functions that may be in progress.
122 *******************************************************************************/
123 static void btm_db_reset (void)
126 tBTM_STATUS status = BTM_DEV_RESET;
130 if (btm_cb.devcb.p_rln_cmpl_cb)
132 p_cb = btm_cb.devcb.p_rln_cmpl_cb;
133 btm_cb.devcb.p_rln_cmpl_cb = NULL;
136 (*p_cb)((void *) NULL);
139 if (btm_cb.devcb.p_rssi_cmpl_cb)
141 p_cb = btm_cb.devcb.p_rssi_cmpl_cb;
142 btm_cb.devcb.p_rssi_cmpl_cb = NULL;
145 (*p_cb)((tBTM_RSSI_RESULTS *) &status);
149 bool set_sec_state_idle(void *data, void *context)
151 tBTM_SEC_DEV_REC *p_dev_rec = data;
152 p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
156 static void reset_complete(void *result) {
157 assert(result == FUTURE_SUCCESS);
158 const controller_t *controller = controller_get_interface();
160 /* Tell L2CAP that all connections are gone */
161 l2cu_device_reset ();
163 /* Clear current security state */
164 list_foreach(btm_cb.sec_dev_rec, set_sec_state_idle, NULL);
166 /* After the reset controller should restore all parameters to defaults. */
167 btm_cb.btm_inq_vars.inq_counter = 1;
168 btm_cb.btm_inq_vars.inq_scan_window = HCI_DEF_INQUIRYSCAN_WINDOW;
169 btm_cb.btm_inq_vars.inq_scan_period = HCI_DEF_INQUIRYSCAN_INTERVAL;
170 btm_cb.btm_inq_vars.inq_scan_type = HCI_DEF_SCAN_TYPE;
172 btm_cb.btm_inq_vars.page_scan_window = HCI_DEF_PAGESCAN_WINDOW;
173 btm_cb.btm_inq_vars.page_scan_period = HCI_DEF_PAGESCAN_INTERVAL;
174 btm_cb.btm_inq_vars.page_scan_type = HCI_DEF_SCAN_TYPE;
176 #if (BLE_INCLUDED == TRUE)
177 btm_cb.ble_ctr_cb.conn_state = BLE_CONN_IDLE;
178 btm_cb.ble_ctr_cb.bg_conn_type = BTM_BLE_CONN_NONE;
179 btm_cb.ble_ctr_cb.p_select_cback = NULL;
180 gatt_reset_bgdev_list();
181 btm_ble_multi_adv_init();
186 l2c_link_processs_num_bufs(controller->get_acl_buffer_count_classic());
187 #if (BLE_INCLUDED == TRUE)
189 #if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE)
190 /* Set up the BLE privacy settings */
191 if (controller->supports_ble() && controller->supports_ble_privacy() &&
192 controller->get_ble_resolving_list_max_size() > 0) {
193 btm_ble_resolving_list_init(controller->get_ble_resolving_list_max_size());
194 /* set the default random private address timeout */
195 btsnd_hcic_ble_set_rand_priv_addr_timeout(BTM_BLE_PRIVATE_ADDR_INT_MS / 1000);
199 if (controller->supports_ble()) {
200 btm_ble_white_list_init(controller->get_ble_white_list_size());
201 l2c_link_processs_ble_num_bufs(controller->get_acl_buffer_count_ble());
205 BTM_SetPinType (btm_cb.cfg.pin_type, btm_cb.cfg.pin_code, btm_cb.cfg.pin_code_len);
207 for (int i = 0; i <= controller->get_last_features_classic_index(); i++) {
208 btm_decode_ext_features_page(i, controller->get_features_classic(i)->as_array);
211 btm_report_device_status(BTM_DEV_STATUS_UP);
214 // TODO(zachoverflow): remove this function
215 void BTM_DeviceReset (UNUSED_ATTR tBTM_CMPL_CB *p_cb) {
216 /* Flush all ACL connections */
217 btm_acl_device_down();
219 /* Clear the callback, so application would not hang on reset */
222 module_start_up_callbacked_wrapper(
223 get_module(CONTROLLER_MODULE),
229 /*******************************************************************************
231 ** Function BTM_IsDeviceUp
233 ** Description This function is called to check if the device is up.
235 ** Returns TRUE if device is up, else FALSE
237 *******************************************************************************/
238 BOOLEAN BTM_IsDeviceUp (void)
240 return controller_get_interface()->get_is_ready();
243 /*******************************************************************************
245 ** Function btm_read_local_name_timeout
247 ** Description Callback when reading the local name times out.
251 *******************************************************************************/
252 void btm_read_local_name_timeout(UNUSED_ATTR void *data)
254 tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_rln_cmpl_cb;
255 btm_cb.devcb.p_rln_cmpl_cb = NULL;
257 (*p_cb)((void *) NULL);
260 /*******************************************************************************
262 ** Function btm_decode_ext_features_page
264 ** Description This function is decodes a features page.
268 *******************************************************************************/
269 static void btm_decode_ext_features_page (UINT8 page_number, const UINT8 *p_features)
271 BTM_TRACE_DEBUG ("btm_decode_ext_features_page page: %d", page_number);
274 /* Extended (Legacy) Page 0 */
275 case HCI_EXT_FEATURES_PAGE_0:
277 /* Create ACL supported packet types mask */
278 btm_cb.btm_acl_pkt_types_supported = (BTM_ACL_PKT_TYPES_MASK_DH1 +
279 BTM_ACL_PKT_TYPES_MASK_DM1);
281 if (HCI_3_SLOT_PACKETS_SUPPORTED(p_features))
282 btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_DH3 +
283 BTM_ACL_PKT_TYPES_MASK_DM3);
285 if (HCI_5_SLOT_PACKETS_SUPPORTED(p_features))
286 btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_DH5 +
287 BTM_ACL_PKT_TYPES_MASK_DM5);
289 /* Add in EDR related ACL types */
290 if (!HCI_EDR_ACL_2MPS_SUPPORTED(p_features))
292 btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH1 +
293 BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 +
294 BTM_ACL_PKT_TYPES_MASK_NO_2_DH5);
297 if (!HCI_EDR_ACL_3MPS_SUPPORTED(p_features))
299 btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_NO_3_DH1 +
300 BTM_ACL_PKT_TYPES_MASK_NO_3_DH3 +
301 BTM_ACL_PKT_TYPES_MASK_NO_3_DH5);
304 /* Check to see if 3 and 5 slot packets are available */
305 if (HCI_EDR_ACL_2MPS_SUPPORTED(p_features) ||
306 HCI_EDR_ACL_3MPS_SUPPORTED(p_features))
308 if (!HCI_3_SLOT_EDR_ACL_SUPPORTED(p_features))
309 btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 +
310 BTM_ACL_PKT_TYPES_MASK_NO_3_DH3);
312 if (!HCI_5_SLOT_EDR_ACL_SUPPORTED(p_features))
313 btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH5 +
314 BTM_ACL_PKT_TYPES_MASK_NO_3_DH5);
317 BTM_TRACE_DEBUG("Local supported ACL packet types: 0x%04x",
318 btm_cb.btm_acl_pkt_types_supported);
320 /* Create (e)SCO supported packet types mask */
321 btm_cb.btm_sco_pkt_types_supported = 0;
322 #if BTM_SCO_INCLUDED == TRUE
323 btm_cb.sco_cb.esco_supported = FALSE;
325 if (HCI_SCO_LINK_SUPPORTED(p_features))
327 btm_cb.btm_sco_pkt_types_supported = BTM_SCO_PKT_TYPES_MASK_HV1;
329 if (HCI_HV2_PACKETS_SUPPORTED(p_features))
330 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_HV2;
332 if (HCI_HV3_PACKETS_SUPPORTED(p_features))
333 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_HV3;
336 if (HCI_ESCO_EV3_SUPPORTED(p_features))
337 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_EV3;
339 if (HCI_ESCO_EV4_SUPPORTED(p_features))
340 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_EV4;
342 if (HCI_ESCO_EV5_SUPPORTED(p_features))
343 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_EV5;
344 #if BTM_SCO_INCLUDED == TRUE
345 if (btm_cb.btm_sco_pkt_types_supported & BTM_ESCO_LINK_ONLY_MASK)
347 btm_cb.sco_cb.esco_supported = TRUE;
349 /* Add in EDR related eSCO types */
350 if (HCI_EDR_ESCO_2MPS_SUPPORTED(p_features))
352 if (!HCI_3_SLOT_EDR_ESCO_SUPPORTED(p_features))
353 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_NO_2_EV5;
357 btm_cb.btm_sco_pkt_types_supported |= (BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 +
358 BTM_SCO_PKT_TYPES_MASK_NO_2_EV5);
361 if (HCI_EDR_ESCO_3MPS_SUPPORTED(p_features))
363 if (!HCI_3_SLOT_EDR_ESCO_SUPPORTED(p_features))
364 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_NO_3_EV5;
368 btm_cb.btm_sco_pkt_types_supported |= (BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 +
369 BTM_SCO_PKT_TYPES_MASK_NO_3_EV5);
374 BTM_TRACE_DEBUG("Local supported SCO packet types: 0x%04x",
375 btm_cb.btm_sco_pkt_types_supported);
377 /* Create Default Policy Settings */
378 if (HCI_SWITCH_SUPPORTED(p_features))
379 btm_cb.btm_def_link_policy |= HCI_ENABLE_MASTER_SLAVE_SWITCH;
381 btm_cb.btm_def_link_policy &= ~HCI_ENABLE_MASTER_SLAVE_SWITCH;
383 if (HCI_HOLD_MODE_SUPPORTED(p_features))
384 btm_cb.btm_def_link_policy |= HCI_ENABLE_HOLD_MODE;
386 btm_cb.btm_def_link_policy &= ~HCI_ENABLE_HOLD_MODE;
388 if (HCI_SNIFF_MODE_SUPPORTED(p_features))
389 btm_cb.btm_def_link_policy |= HCI_ENABLE_SNIFF_MODE;
391 btm_cb.btm_def_link_policy &= ~HCI_ENABLE_SNIFF_MODE;
393 if (HCI_PARK_MODE_SUPPORTED(p_features))
394 btm_cb.btm_def_link_policy |= HCI_ENABLE_PARK_MODE;
396 btm_cb.btm_def_link_policy &= ~HCI_ENABLE_PARK_MODE;
398 btm_sec_dev_reset ();
400 if (HCI_LMP_INQ_RSSI_SUPPORTED(p_features))
402 if (HCI_EXT_INQ_RSP_SUPPORTED(p_features))
403 BTM_SetInquiryMode (BTM_INQ_RESULT_EXTENDED);
405 BTM_SetInquiryMode (BTM_INQ_RESULT_WITH_RSSI);
408 #if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
409 if( HCI_NON_FLUSHABLE_PB_SUPPORTED(p_features))
410 l2cu_set_non_flushable_pbf(TRUE);
412 l2cu_set_non_flushable_pbf(FALSE);
414 BTM_SetPageScanType (BTM_DEFAULT_SCAN_TYPE);
415 BTM_SetInquiryScanType (BTM_DEFAULT_SCAN_TYPE);
419 /* Extended Page 1 */
420 case HCI_EXT_FEATURES_PAGE_1:
421 /* Nothing to do for page 1 */
424 /* Extended Page 2 */
425 case HCI_EXT_FEATURES_PAGE_2:
426 /* Nothing to do for page 2 */
430 BTM_TRACE_ERROR("btm_decode_ext_features_page page=%d unknown", page_number);
435 /*******************************************************************************
437 ** Function BTM_SetLocalDeviceName
439 ** Description This function is called to set the local device name.
441 ** Returns status of the operation
443 *******************************************************************************/
444 tBTM_STATUS BTM_SetLocalDeviceName (char *p_name)
448 if (!p_name || !p_name[0] || (strlen ((char *)p_name) > BD_NAME_LEN))
449 return (BTM_ILLEGAL_VALUE);
451 if (!controller_get_interface()->get_is_ready())
452 return (BTM_DEV_RESET);
454 #if BTM_MAX_LOC_BD_NAME_LEN > 0
455 /* Save the device name if local storage is enabled */
456 p = (UINT8 *)btm_cb.cfg.bd_name;
457 if (p != (UINT8 *)p_name)
458 strlcpy(btm_cb.cfg.bd_name, p_name, BTM_MAX_LOC_BD_NAME_LEN);
463 if (btsnd_hcic_change_name(p))
464 return (BTM_CMD_STARTED);
466 return (BTM_NO_RESOURCES);
471 /*******************************************************************************
473 ** Function BTM_ReadLocalDeviceName
475 ** Description This function is called to read the local device name.
477 ** Returns status of the operation
478 ** If success, BTM_SUCCESS is returned and p_name points stored
480 ** If BTM doesn't store local device name, BTM_NO_RESOURCES is
481 ** is returned and p_name is set to NULL
483 *******************************************************************************/
484 tBTM_STATUS BTM_ReadLocalDeviceName (char **p_name)
486 #if BTM_MAX_LOC_BD_NAME_LEN > 0
487 *p_name = btm_cb.cfg.bd_name;
491 return(BTM_NO_RESOURCES);
496 /*******************************************************************************
498 ** Function BTM_ReadLocalDeviceNameFromController
500 ** Description Get local device name from controller. Do not use cached
501 ** name (used to get chip-id prior to btm reset complete).
503 ** Returns BTM_CMD_STARTED if successful, otherwise an error
505 *******************************************************************************/
506 tBTM_STATUS BTM_ReadLocalDeviceNameFromController (tBTM_CMPL_CB *p_rln_cmpl_cback)
508 /* Check if rln already in progress */
509 if (btm_cb.devcb.p_rln_cmpl_cb)
510 return(BTM_NO_RESOURCES);
513 btm_cb.devcb.p_rln_cmpl_cb = p_rln_cmpl_cback;
515 btsnd_hcic_read_name();
516 alarm_set_on_queue(btm_cb.devcb.read_local_name_timer,
517 BTM_DEV_NAME_REPLY_TIMEOUT_MS,
518 btm_read_local_name_timeout, NULL,
519 btu_general_alarm_queue);
521 return BTM_CMD_STARTED;
524 /*******************************************************************************
526 ** Function btm_read_local_name_complete
528 ** Description This function is called when local name read complete.
529 ** message is received from the HCI.
533 *******************************************************************************/
534 void btm_read_local_name_complete (UINT8 *p, UINT16 evt_len)
536 tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_rln_cmpl_cb;
540 alarm_cancel(btm_cb.devcb.read_local_name_timer);
542 /* If there was a callback address for read local name, call it */
543 btm_cb.devcb.p_rln_cmpl_cb = NULL;
547 STREAM_TO_UINT8 (status, p);
549 if (status == HCI_SUCCESS)
556 /*******************************************************************************
558 ** Function BTM_SetDeviceClass
560 ** Description This function is called to set the local device class
562 ** Returns status of the operation
564 *******************************************************************************/
565 tBTM_STATUS BTM_SetDeviceClass (DEV_CLASS dev_class)
567 if(!memcmp (btm_cb.devcb.dev_class, dev_class, DEV_CLASS_LEN))
570 memcpy (btm_cb.devcb.dev_class, dev_class, DEV_CLASS_LEN);
572 if (!controller_get_interface()->get_is_ready())
573 return (BTM_DEV_RESET);
575 if (!btsnd_hcic_write_dev_class (dev_class))
576 return (BTM_NO_RESOURCES);
578 return (BTM_SUCCESS);
582 /*******************************************************************************
584 ** Function BTM_ReadDeviceClass
586 ** Description This function is called to read the local device class
588 ** Returns pointer to the device class
590 *******************************************************************************/
591 UINT8 *BTM_ReadDeviceClass (void)
593 return ((UINT8 *)btm_cb.devcb.dev_class);
597 /*******************************************************************************
599 ** Function BTM_ReadLocalFeatures
601 ** Description This function is called to read the local features
603 ** Returns pointer to the local features string
605 *******************************************************************************/
606 // TODO(zachoverflow): get rid of this function
607 UINT8 *BTM_ReadLocalFeatures (void)
609 // Discarding const modifier for now, until this function dies
610 return (UINT8 *)controller_get_interface()->get_features_classic(0)->as_array;
613 /*******************************************************************************
615 ** Function BTM_RegisterForDeviceStatusNotif
617 ** Description This function is called to register for device status
618 ** change notifications.
620 ** If one registration is already there calling function should
621 ** save the pointer to the function that is return and
622 ** call it when processing of the event is complete
624 ** Returns status of the operation
626 *******************************************************************************/
627 tBTM_DEV_STATUS_CB *BTM_RegisterForDeviceStatusNotif (tBTM_DEV_STATUS_CB *p_cb)
629 tBTM_DEV_STATUS_CB *p_prev = btm_cb.devcb.p_dev_status_cb;
631 btm_cb.devcb.p_dev_status_cb = p_cb;
635 /*******************************************************************************
637 ** Function BTM_VendorSpecificCommand
639 ** Description Send a vendor specific HCI command to the controller.
642 ** BTM_SUCCESS Command sent. Does not expect command complete
643 ** event. (command cmpl callback param is NULL)
644 ** BTM_CMD_STARTED Command sent. Waiting for command cmpl event.
647 ** Opcode will be OR'd with HCI_GRP_VENDOR_SPECIFIC.
649 *******************************************************************************/
650 tBTM_STATUS BTM_VendorSpecificCommand(UINT16 opcode, UINT8 param_len,
651 UINT8 *p_param_buf, tBTM_VSC_CMPL_CB *p_cb)
653 /* Allocate a buffer to hold HCI command plus the callback function */
654 void *p_buf = osi_malloc(sizeof(BT_HDR) + sizeof(tBTM_CMPL_CB *) +
655 param_len + HCIC_PREAMBLE_SIZE);
657 BTM_TRACE_EVENT("BTM: %s: Opcode: 0x%04X, ParamLen: %i.", __func__,
660 /* Send the HCI command (opcode will be OR'd with HCI_GRP_VENDOR_SPECIFIC) */
661 btsnd_hcic_vendor_spec_cmd(p_buf, opcode, param_len, p_param_buf, (void *)p_cb);
665 return (BTM_CMD_STARTED);
667 return (BTM_SUCCESS);
671 /*******************************************************************************
673 ** Function btm_vsc_complete
675 ** Description This function is called when local HCI Vendor Specific
676 ** Command complete message is received from the HCI.
680 *******************************************************************************/
681 void btm_vsc_complete (UINT8 *p, UINT16 opcode, UINT16 evt_len,
682 tBTM_CMPL_CB *p_vsc_cplt_cback)
684 tBTM_VSC_CMPL vcs_cplt_params;
686 /* If there was a callback address for vcs complete, call it */
687 if (p_vsc_cplt_cback)
689 /* Pass paramters to the callback function */
690 vcs_cplt_params.opcode = opcode; /* Number of bytes in return info */
691 vcs_cplt_params.param_len = evt_len; /* Number of bytes in return info */
692 vcs_cplt_params.p_param_buf = p;
693 (*p_vsc_cplt_cback)(&vcs_cplt_params); /* Call the VSC complete callback function */
697 /*******************************************************************************
699 ** Function BTM_RegisterForVSEvents
701 ** Description This function is called to register/deregister for vendor
702 ** specific HCI events.
704 ** If is_register=TRUE, then the function will be registered;
705 ** if is_register=FALSE, then the function will be deregistered.
707 ** Returns BTM_SUCCESS if successful,
708 ** BTM_BUSY if maximum number of callbacks have already been
711 *******************************************************************************/
712 tBTM_STATUS BTM_RegisterForVSEvents (tBTM_VS_EVT_CB *p_cb, BOOLEAN is_register)
714 tBTM_STATUS retval = BTM_SUCCESS;
715 UINT8 i, free_idx = BTM_MAX_VSE_CALLBACKS;
717 /* See if callback is already registered */
718 for (i=0; i<BTM_MAX_VSE_CALLBACKS; i++)
720 if (btm_cb.devcb.p_vend_spec_cb[i] == NULL)
722 /* Found a free slot. Store index */
725 else if (btm_cb.devcb.p_vend_spec_cb[i] == p_cb)
727 /* Found callback in lookup table. If deregistering, clear the entry. */
728 if (is_register == FALSE)
730 btm_cb.devcb.p_vend_spec_cb[i] = NULL;
731 BTM_TRACE_EVENT("BTM Deregister For VSEvents is successfully");
733 return (BTM_SUCCESS);
737 /* Didn't find callback. Add callback to free slot if registering */
740 if (free_idx < BTM_MAX_VSE_CALLBACKS)
742 btm_cb.devcb.p_vend_spec_cb[free_idx] = p_cb;
743 BTM_TRACE_EVENT("BTM Register For VSEvents is successfully");
747 /* No free entries available */
748 BTM_TRACE_ERROR ("BTM_RegisterForVSEvents: too many callbacks registered");
750 retval = BTM_NO_RESOURCES;
757 /*******************************************************************************
759 ** Function btm_vendor_specific_evt
761 ** Description Process event HCI_VENDOR_SPECIFIC_EVT
763 ** Note: Some controllers do not send command complete, so
764 ** the callback and busy flag are cleared here also.
768 *******************************************************************************/
769 void btm_vendor_specific_evt (UINT8 *p, UINT8 evt_len)
773 BTM_TRACE_DEBUG ("BTM Event: Vendor Specific event from controller");
775 for (i=0; i<BTM_MAX_VSE_CALLBACKS; i++)
777 if (btm_cb.devcb.p_vend_spec_cb[i])
778 (*btm_cb.devcb.p_vend_spec_cb[i])(evt_len, p);
783 /*******************************************************************************
785 ** Function BTM_WritePageTimeout
787 ** Description Send HCI Write Page Timeout.
790 ** BTM_SUCCESS Command sent.
791 ** BTM_NO_RESOURCES If out of resources to send the command.
794 *******************************************************************************/
795 tBTM_STATUS BTM_WritePageTimeout(UINT16 timeout)
797 BTM_TRACE_EVENT ("BTM: BTM_WritePageTimeout: Timeout: %d.", timeout);
799 /* Send the HCI command */
800 if (btsnd_hcic_write_page_tout (timeout))
801 return (BTM_SUCCESS);
803 return (BTM_NO_RESOURCES);
806 /*******************************************************************************
808 ** Function BTM_WriteVoiceSettings
810 ** Description Send HCI Write Voice Settings command.
811 ** See hcidefs.h for settings bitmask values.
814 ** BTM_SUCCESS Command sent.
815 ** BTM_NO_RESOURCES If out of resources to send the command.
818 *******************************************************************************/
819 tBTM_STATUS BTM_WriteVoiceSettings(UINT16 settings)
821 BTM_TRACE_EVENT ("BTM: BTM_WriteVoiceSettings: Settings: 0x%04x.", settings);
823 /* Send the HCI command */
824 if (btsnd_hcic_write_voice_settings ((UINT16)(settings & 0x03ff)))
825 return (BTM_SUCCESS);
827 return (BTM_NO_RESOURCES);
830 /*******************************************************************************
832 ** Function BTM_EnableTestMode
834 ** Description Send HCI the enable device under test command.
836 ** Note: Controller can only be taken out of this mode by
837 ** resetting the controller.
840 ** BTM_SUCCESS Command sent.
841 ** BTM_NO_RESOURCES If out of resources to send the command.
844 *******************************************************************************/
845 tBTM_STATUS BTM_EnableTestMode(void)
849 BTM_TRACE_EVENT ("BTM: BTM_EnableTestMode");
851 /* set auto accept connection as this is needed during test mode */
852 /* Allocate a buffer to hold HCI command */
853 cond = HCI_DO_AUTO_ACCEPT_CONNECT;
854 if (!btsnd_hcic_set_event_filter(HCI_FILTER_CONNECTION_SETUP,
855 HCI_FILTER_COND_NEW_DEVICE,
856 &cond, sizeof(cond)))
858 return (BTM_NO_RESOURCES);
861 /* put device to connectable mode */
862 if (BTM_SetConnectability(BTM_CONNECTABLE, BTM_DEFAULT_CONN_WINDOW,
863 BTM_DEFAULT_CONN_INTERVAL) != BTM_SUCCESS) {
864 return BTM_NO_RESOURCES;
867 /* put device to discoverable mode */
868 if (BTM_SetDiscoverability(BTM_GENERAL_DISCOVERABLE,
869 BTM_DEFAULT_DISC_WINDOW,
870 BTM_DEFAULT_DISC_INTERVAL) != BTM_SUCCESS) {
871 return BTM_NO_RESOURCES;
874 /* mask off all of event from controller */
875 hci_layer_get_interface()->transmit_command(
876 hci_packet_factory_get_interface()->make_set_event_mask((const bt_event_mask_t *)("\x00\x00\x00\x00\x00\x00\x00\x00")),
881 /* Send the HCI command */
882 if (btsnd_hcic_enable_test_mode ())
883 return (BTM_SUCCESS);
885 return (BTM_NO_RESOURCES);
888 /*******************************************************************************
890 ** Function BTM_DeleteStoredLinkKey
892 ** Description This function is called to delete link key for the specified
893 ** device addresses from the NVRAM storage attached to the Bluetooth
896 ** Parameters: bd_addr - Addresses of the devices
897 ** p_cb - Call back function to be called to return
900 *******************************************************************************/
901 tBTM_STATUS BTM_DeleteStoredLinkKey(BD_ADDR bd_addr, tBTM_CMPL_CB *p_cb)
903 BD_ADDR local_bd_addr;
904 BOOLEAN delete_all_flag = FALSE;
906 /* Check if the previous command is completed */
907 if (btm_cb.devcb.p_stored_link_key_cmpl_cb)
912 /* This is to delete all link keys */
913 delete_all_flag = TRUE;
915 /* We don't care the BD address. Just pass a non zero pointer */
916 bd_addr = local_bd_addr;
919 BTM_TRACE_EVENT ("BTM: BTM_DeleteStoredLinkKey: delete_all_flag: %s",
920 delete_all_flag ? "TRUE" : "FALSE");
922 /* Send the HCI command */
923 btm_cb.devcb.p_stored_link_key_cmpl_cb = p_cb;
924 if (!btsnd_hcic_delete_stored_key (bd_addr, delete_all_flag))
926 return (BTM_NO_RESOURCES);
929 return (BTM_SUCCESS);
932 /*******************************************************************************
934 ** Function btm_delete_stored_link_key_complete
936 ** Description This function is called when the command complete message
937 ** is received from the HCI for the delete stored link key command.
941 *******************************************************************************/
942 void btm_delete_stored_link_key_complete (UINT8 *p)
944 tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_stored_link_key_cmpl_cb;
945 tBTM_DELETE_STORED_LINK_KEY_COMPLETE result;
947 /* If there was a callback registered for read stored link key, call it */
948 btm_cb.devcb.p_stored_link_key_cmpl_cb = NULL;
952 /* Set the call back event to indicate command complete */
953 result.event = BTM_CB_EVT_DELETE_STORED_LINK_KEYS;
955 /* Extract the result fields from the HCI event */
956 STREAM_TO_UINT8 (result.status, p);
957 STREAM_TO_UINT16 (result.num_keys, p);
959 /* Call the call back and pass the result */
964 /*******************************************************************************
966 ** Function btm_report_device_status
968 ** Description This function is called when there is a change in the device
969 ** status. This function will report the new device status to
974 *******************************************************************************/
975 void btm_report_device_status (tBTM_DEV_STATUS status)
977 tBTM_DEV_STATUS_CB *p_cb = btm_cb.devcb.p_dev_status_cb;
979 /* Call the call back to pass the device status to application */