1 /******************************************************************************
3 * Copyright (C) 1999-2012 Broadcom Corporation
5 * Licensed under the Apache License, Version 2.0 (the "License");
6 * you may not use this file except in compliance with the License.
7 * You may obtain a copy of the License at:
9 * http://www.apache.org/licenses/LICENSE-2.0
11 * Unless required by applicable law or agreed to in writing, software
12 * distributed under the License is distributed on an "AS IS" BASIS,
13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 * See the License for the specific language governing permissions and
15 * limitations under the License.
17 ******************************************************************************/
19 /******************************************************************************
21 * This file contains functions that handle BTM interface functions for the
22 * Bluetooth device including Rest, HCI buffer size and others
24 ******************************************************************************/
36 #include "device/include/controller.h"
37 #include "hci_layer.h"
40 #include "btcore/include/module.h"
41 #include "osi/include/thread.h"
43 #if BLE_INCLUDED == TRUE
45 #endif /* BLE_INCLUDED */
47 extern thread_t *bt_workqueue_thread;
49 /********************************************************************************/
50 /* L O C A L D A T A D E F I N I T I O N S */
51 /********************************************************************************/
53 #ifndef BTM_DEV_RESET_TIMEOUT
54 #define BTM_DEV_RESET_TIMEOUT 4
57 #define BTM_DEV_REPLY_TIMEOUT 2 /* 1 second expiration time is not good. Timer may start between 0 and 1 second. */
58 /* if it starts at the very end of the 0 second, timer will expire really easily. */
60 #define BTM_INFO_TIMEOUT 5 /* 5 seconds for info response */
62 /********************************************************************************/
63 /* L O C A L F U N C T I O N P R O T O T Y P E S */
64 /********************************************************************************/
66 static void btm_decode_ext_features_page (UINT8 page_number, const BD_FEATURES p_features);
68 /*******************************************************************************
70 ** Function btm_dev_init
72 ** Description This function is on the BTM startup
76 *******************************************************************************/
77 void btm_dev_init (void)
79 #if 0 /* cleared in btm_init; put back in if called from anywhere else! */
80 memset (&btm_cb.devcb, 0, sizeof (tBTM_DEVCB));
83 /* Initialize nonzero defaults */
84 #if (BTM_MAX_LOC_BD_NAME_LEN > 0)
85 memset(btm_cb.cfg.bd_name, 0, sizeof(tBTM_LOC_BD_NAME));
88 btm_cb.devcb.reset_timer.param = (TIMER_PARAM_TYPE)TT_DEV_RESET;
89 btm_cb.devcb.rln_timer.param = (TIMER_PARAM_TYPE)TT_DEV_RLN;
91 btm_cb.btm_acl_pkt_types_supported = BTM_ACL_PKT_TYPES_MASK_DH1 + BTM_ACL_PKT_TYPES_MASK_DM1 +
92 BTM_ACL_PKT_TYPES_MASK_DH3 + BTM_ACL_PKT_TYPES_MASK_DM3 +
93 BTM_ACL_PKT_TYPES_MASK_DH5 + BTM_ACL_PKT_TYPES_MASK_DM5;
95 btm_cb.btm_sco_pkt_types_supported = BTM_SCO_PKT_TYPES_MASK_HV1 +
96 BTM_SCO_PKT_TYPES_MASK_HV2 +
97 BTM_SCO_PKT_TYPES_MASK_HV3 +
98 BTM_SCO_PKT_TYPES_MASK_EV3 +
99 BTM_SCO_PKT_TYPES_MASK_EV4 +
100 BTM_SCO_PKT_TYPES_MASK_EV5;
104 /*******************************************************************************
106 ** Function btm_db_reset
108 ** Description This function is called by BTM_DeviceReset and clears out any
109 ** pending callbacks for inquiries, discoveries, other pending
110 ** functions that may be in progress.
114 *******************************************************************************/
115 static void btm_db_reset (void)
118 tBTM_STATUS status = BTM_DEV_RESET;
122 if (btm_cb.devcb.p_rln_cmpl_cb)
124 p_cb = btm_cb.devcb.p_rln_cmpl_cb;
125 btm_cb.devcb.p_rln_cmpl_cb = NULL;
128 (*p_cb)((void *) NULL);
131 if (btm_cb.devcb.p_rssi_cmpl_cb)
133 p_cb = btm_cb.devcb.p_rssi_cmpl_cb;
134 btm_cb.devcb.p_rssi_cmpl_cb = NULL;
137 (*p_cb)((tBTM_RSSI_RESULTS *) &status);
141 static void reset_complete(void *result) {
142 assert(result == FUTURE_SUCCESS);
143 const controller_t *controller = controller_get_interface();
145 /* Tell L2CAP that all connections are gone */
146 l2cu_device_reset ();
148 /* Clear current security state */
149 for (int devinx = 0; devinx < BTM_SEC_MAX_DEVICE_RECORDS; devinx++) {
150 btm_cb.sec_dev_rec[devinx].sec_state = BTM_SEC_STATE_IDLE;
153 /* After the reset controller should restore all parameters to defaults. */
154 btm_cb.btm_inq_vars.inq_counter = 1;
155 btm_cb.btm_inq_vars.inq_scan_window = HCI_DEF_INQUIRYSCAN_WINDOW;
156 btm_cb.btm_inq_vars.inq_scan_period = HCI_DEF_INQUIRYSCAN_INTERVAL;
157 btm_cb.btm_inq_vars.inq_scan_type = HCI_DEF_SCAN_TYPE;
159 btm_cb.btm_inq_vars.page_scan_window = HCI_DEF_PAGESCAN_WINDOW;
160 btm_cb.btm_inq_vars.page_scan_period = HCI_DEF_PAGESCAN_INTERVAL;
161 btm_cb.btm_inq_vars.page_scan_type = HCI_DEF_SCAN_TYPE;
163 #if (BLE_INCLUDED == TRUE)
164 btm_cb.ble_ctr_cb.conn_state = BLE_CONN_IDLE;
165 btm_cb.ble_ctr_cb.bg_conn_type = BTM_BLE_CONN_NONE;
166 btm_cb.ble_ctr_cb.p_select_cback = NULL;
167 gatt_reset_bgdev_list();
168 btm_ble_multi_adv_init();
173 l2c_link_processs_num_bufs(controller->get_acl_buffer_count_classic());
174 #if (BLE_INCLUDED == TRUE)
176 #if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE)
177 /* Set up the BLE privacy settings */
178 if (controller->supports_ble() && controller->supports_ble_privacy() &&
179 controller->get_ble_resolving_list_max_size() > 0) {
180 btm_ble_resolving_list_init(controller->get_ble_resolving_list_max_size());
181 /* set the default random private address timeout */
182 btsnd_hcic_ble_set_rand_priv_addr_timeout(BTM_BLE_PRIVATE_ADDR_INT);
186 if (controller->supports_ble()) {
187 btm_ble_white_list_init(controller->get_ble_white_list_size());
188 l2c_link_processs_ble_num_bufs(controller->get_acl_buffer_count_ble());
192 BTM_SetPinType (btm_cb.cfg.pin_type, btm_cb.cfg.pin_code, btm_cb.cfg.pin_code_len);
194 for (int i = 0; i <= controller->get_last_features_classic_index(); i++) {
195 btm_decode_ext_features_page(i, controller->get_features_classic(i)->as_array);
198 btm_report_device_status(BTM_DEV_STATUS_UP);
201 // TODO(zachoverflow): remove this function
202 void BTM_DeviceReset (UNUSED_ATTR tBTM_CMPL_CB *p_cb) {
203 /* Flush all ACL connections */
204 btm_acl_device_down();
206 /* Clear the callback, so application would not hang on reset */
209 module_start_up_callbacked_wrapper(
210 get_module(CONTROLLER_MODULE),
216 /*******************************************************************************
218 ** Function BTM_IsDeviceUp
220 ** Description This function is called to check if the device is up.
222 ** Returns TRUE if device is up, else FALSE
224 *******************************************************************************/
225 BOOLEAN BTM_IsDeviceUp (void)
227 return controller_get_interface()->get_is_ready();
230 /*******************************************************************************
232 ** Function btm_dev_timeout
234 ** Description This function is called when a timer list entry expires.
238 *******************************************************************************/
239 void btm_dev_timeout (TIMER_LIST_ENT *p_tle)
241 TIMER_PARAM_TYPE timer_type = (TIMER_PARAM_TYPE)p_tle->param;
243 if (timer_type == (TIMER_PARAM_TYPE)TT_DEV_RLN)
245 tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_rln_cmpl_cb;
247 btm_cb.devcb.p_rln_cmpl_cb = NULL;
250 (*p_cb)((void *) NULL);
254 /*******************************************************************************
256 ** Function btm_decode_ext_features_page
258 ** Description This function is decodes a features page.
262 *******************************************************************************/
263 static void btm_decode_ext_features_page (UINT8 page_number, const UINT8 *p_features)
268 BTM_TRACE_DEBUG ("btm_decode_ext_features_page page: %d", page_number);
271 /* Extended (Legacy) Page 0 */
272 case HCI_EXT_FEATURES_PAGE_0:
274 /* Create ACL supported packet types mask */
275 btm_cb.btm_acl_pkt_types_supported = (BTM_ACL_PKT_TYPES_MASK_DH1 +
276 BTM_ACL_PKT_TYPES_MASK_DM1);
278 if (HCI_3_SLOT_PACKETS_SUPPORTED(p_features))
279 btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_DH3 +
280 BTM_ACL_PKT_TYPES_MASK_DM3);
282 if (HCI_5_SLOT_PACKETS_SUPPORTED(p_features))
283 btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_DH5 +
284 BTM_ACL_PKT_TYPES_MASK_DM5);
286 /* Add in EDR related ACL types */
287 if (!HCI_EDR_ACL_2MPS_SUPPORTED(p_features))
289 btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH1 +
290 BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 +
291 BTM_ACL_PKT_TYPES_MASK_NO_2_DH5);
294 if (!HCI_EDR_ACL_3MPS_SUPPORTED(p_features))
296 btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_NO_3_DH1 +
297 BTM_ACL_PKT_TYPES_MASK_NO_3_DH3 +
298 BTM_ACL_PKT_TYPES_MASK_NO_3_DH5);
301 /* Check to see if 3 and 5 slot packets are available */
302 if (HCI_EDR_ACL_2MPS_SUPPORTED(p_features) ||
303 HCI_EDR_ACL_3MPS_SUPPORTED(p_features))
305 if (!HCI_3_SLOT_EDR_ACL_SUPPORTED(p_features))
306 btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 +
307 BTM_ACL_PKT_TYPES_MASK_NO_3_DH3);
309 if (!HCI_5_SLOT_EDR_ACL_SUPPORTED(p_features))
310 btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH5 +
311 BTM_ACL_PKT_TYPES_MASK_NO_3_DH5);
314 BTM_TRACE_DEBUG("Local supported ACL packet types: 0x%04x",
315 btm_cb.btm_acl_pkt_types_supported);
317 /* Create (e)SCO supported packet types mask */
318 btm_cb.btm_sco_pkt_types_supported = 0;
319 #if BTM_SCO_INCLUDED == TRUE
320 btm_cb.sco_cb.esco_supported = FALSE;
322 if (HCI_SCO_LINK_SUPPORTED(p_features))
324 btm_cb.btm_sco_pkt_types_supported = BTM_SCO_PKT_TYPES_MASK_HV1;
326 if (HCI_HV2_PACKETS_SUPPORTED(p_features))
327 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_HV2;
329 if (HCI_HV3_PACKETS_SUPPORTED(p_features))
330 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_HV3;
333 if (HCI_ESCO_EV3_SUPPORTED(p_features))
334 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_EV3;
336 if (HCI_ESCO_EV4_SUPPORTED(p_features))
337 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_EV4;
339 if (HCI_ESCO_EV5_SUPPORTED(p_features))
340 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_EV5;
341 #if BTM_SCO_INCLUDED == TRUE
342 if (btm_cb.btm_sco_pkt_types_supported & BTM_ESCO_LINK_ONLY_MASK)
344 btm_cb.sco_cb.esco_supported = TRUE;
346 /* Add in EDR related eSCO types */
347 if (HCI_EDR_ESCO_2MPS_SUPPORTED(p_features))
349 if (!HCI_3_SLOT_EDR_ESCO_SUPPORTED(p_features))
350 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_NO_2_EV5;
354 btm_cb.btm_sco_pkt_types_supported |= (BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 +
355 BTM_SCO_PKT_TYPES_MASK_NO_2_EV5);
358 if (HCI_EDR_ESCO_3MPS_SUPPORTED(p_features))
360 if (!HCI_3_SLOT_EDR_ESCO_SUPPORTED(p_features))
361 btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_NO_3_EV5;
365 btm_cb.btm_sco_pkt_types_supported |= (BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 +
366 BTM_SCO_PKT_TYPES_MASK_NO_3_EV5);
371 BTM_TRACE_DEBUG("Local supported SCO packet types: 0x%04x",
372 btm_cb.btm_sco_pkt_types_supported);
374 /* Create Default Policy Settings */
375 if (HCI_SWITCH_SUPPORTED(p_features))
376 btm_cb.btm_def_link_policy |= HCI_ENABLE_MASTER_SLAVE_SWITCH;
378 btm_cb.btm_def_link_policy &= ~HCI_ENABLE_MASTER_SLAVE_SWITCH;
380 if (HCI_HOLD_MODE_SUPPORTED(p_features))
381 btm_cb.btm_def_link_policy |= HCI_ENABLE_HOLD_MODE;
383 btm_cb.btm_def_link_policy &= ~HCI_ENABLE_HOLD_MODE;
385 if (HCI_SNIFF_MODE_SUPPORTED(p_features))
386 btm_cb.btm_def_link_policy |= HCI_ENABLE_SNIFF_MODE;
388 btm_cb.btm_def_link_policy &= ~HCI_ENABLE_SNIFF_MODE;
390 if (HCI_PARK_MODE_SUPPORTED(p_features))
391 btm_cb.btm_def_link_policy |= HCI_ENABLE_PARK_MODE;
393 btm_cb.btm_def_link_policy &= ~HCI_ENABLE_PARK_MODE;
395 btm_sec_dev_reset ();
397 if (HCI_LMP_INQ_RSSI_SUPPORTED(p_features))
399 if (HCI_EXT_INQ_RSP_SUPPORTED(p_features))
400 BTM_SetInquiryMode (BTM_INQ_RESULT_EXTENDED);
402 BTM_SetInquiryMode (BTM_INQ_RESULT_WITH_RSSI);
405 #if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
406 if( HCI_NON_FLUSHABLE_PB_SUPPORTED(p_features))
407 l2cu_set_non_flushable_pbf(TRUE);
409 l2cu_set_non_flushable_pbf(FALSE);
411 BTM_SetPageScanType (BTM_DEFAULT_SCAN_TYPE);
412 BTM_SetInquiryScanType (BTM_DEFAULT_SCAN_TYPE);
416 /* Extended Page 1 */
417 case HCI_EXT_FEATURES_PAGE_1:
418 /* Nothing to do for page 1 */
421 /* Extended Page 2 */
422 case HCI_EXT_FEATURES_PAGE_2:
423 /* Nothing to do for page 2 */
427 BTM_TRACE_ERROR("btm_decode_ext_features_page page=%d unknown", page_number);
432 /*******************************************************************************
434 ** Function BTM_SetLocalDeviceName
436 ** Description This function is called to set the local device name.
438 ** Returns status of the operation
440 *******************************************************************************/
441 tBTM_STATUS BTM_SetLocalDeviceName (char *p_name)
445 if (!p_name || !p_name[0] || (strlen ((char *)p_name) > BD_NAME_LEN))
446 return (BTM_ILLEGAL_VALUE);
448 if (!controller_get_interface()->get_is_ready())
449 return (BTM_DEV_RESET);
451 #if BTM_MAX_LOC_BD_NAME_LEN > 0
452 /* Save the device name if local storage is enabled */
453 p = (UINT8 *)btm_cb.cfg.bd_name;
454 if (p != (UINT8 *)p_name)
456 BCM_STRNCPY_S(btm_cb.cfg.bd_name, sizeof(btm_cb.cfg.bd_name), p_name, BTM_MAX_LOC_BD_NAME_LEN);
457 btm_cb.cfg.bd_name[BTM_MAX_LOC_BD_NAME_LEN] = '\0';
463 if (btsnd_hcic_change_name(p))
464 return (BTM_CMD_STARTED);
466 return (BTM_NO_RESOURCES);
471 /*******************************************************************************
473 ** Function BTM_ReadLocalDeviceName
475 ** Description This function is called to read the local device name.
477 ** Returns status of the operation
478 ** If success, BTM_SUCCESS is returned and p_name points stored
480 ** If BTM doesn't store local device name, BTM_NO_RESOURCES is
481 ** is returned and p_name is set to NULL
483 *******************************************************************************/
484 tBTM_STATUS BTM_ReadLocalDeviceName (char **p_name)
486 #if BTM_MAX_LOC_BD_NAME_LEN > 0
487 *p_name = btm_cb.cfg.bd_name;
491 return(BTM_NO_RESOURCES);
496 /*******************************************************************************
498 ** Function BTM_ReadLocalDeviceNameFromController
500 ** Description Get local device name from controller. Do not use cached
501 ** name (used to get chip-id prior to btm reset complete).
503 ** Returns BTM_CMD_STARTED if successful, otherwise an error
505 *******************************************************************************/
506 tBTM_STATUS BTM_ReadLocalDeviceNameFromController (tBTM_CMPL_CB *p_rln_cmpl_cback)
508 /* Check if rln already in progress */
509 if (btm_cb.devcb.p_rln_cmpl_cb)
510 return(BTM_NO_RESOURCES);
513 btm_cb.devcb.p_rln_cmpl_cb = p_rln_cmpl_cback;
515 btsnd_hcic_read_name();
516 btu_start_timer (&btm_cb.devcb.rln_timer, BTU_TTYPE_BTM_DEV_CTL, BTM_DEV_REPLY_TIMEOUT);
518 return BTM_CMD_STARTED;
521 /*******************************************************************************
523 ** Function btm_read_local_name_complete
525 ** Description This function is called when local name read complete.
526 ** message is received from the HCI.
530 *******************************************************************************/
531 void btm_read_local_name_complete (UINT8 *p, UINT16 evt_len)
533 tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_rln_cmpl_cb;
537 btu_stop_timer (&btm_cb.devcb.rln_timer);
539 /* If there was a callback address for read local name, call it */
540 btm_cb.devcb.p_rln_cmpl_cb = NULL;
544 STREAM_TO_UINT8 (status, p);
546 if (status == HCI_SUCCESS)
553 /*******************************************************************************
555 ** Function BTM_SetDeviceClass
557 ** Description This function is called to set the local device class
559 ** Returns status of the operation
561 *******************************************************************************/
562 tBTM_STATUS BTM_SetDeviceClass (DEV_CLASS dev_class)
564 if(!memcmp (btm_cb.devcb.dev_class, dev_class, DEV_CLASS_LEN))
567 memcpy (btm_cb.devcb.dev_class, dev_class, DEV_CLASS_LEN);
569 if (!controller_get_interface()->get_is_ready())
570 return (BTM_DEV_RESET);
572 if (!btsnd_hcic_write_dev_class (dev_class))
573 return (BTM_NO_RESOURCES);
575 return (BTM_SUCCESS);
579 /*******************************************************************************
581 ** Function BTM_ReadDeviceClass
583 ** Description This function is called to read the local device class
585 ** Returns pointer to the device class
587 *******************************************************************************/
588 UINT8 *BTM_ReadDeviceClass (void)
590 return ((UINT8 *)btm_cb.devcb.dev_class);
594 /*******************************************************************************
596 ** Function BTM_ReadLocalFeatures
598 ** Description This function is called to read the local features
600 ** Returns pointer to the local features string
602 *******************************************************************************/
603 // TODO(zachoverflow): get rid of this function
604 UINT8 *BTM_ReadLocalFeatures (void)
606 // Discarding const modifier for now, until this function dies
607 return (UINT8 *)controller_get_interface()->get_features_classic(0)->as_array;
610 /*******************************************************************************
612 ** Function BTM_RegisterForDeviceStatusNotif
614 ** Description This function is called to register for device status
615 ** change notifications.
617 ** If one registration is already there calling function should
618 ** save the pointer to the function that is return and
619 ** call it when processing of the event is complete
621 ** Returns status of the operation
623 *******************************************************************************/
624 tBTM_DEV_STATUS_CB *BTM_RegisterForDeviceStatusNotif (tBTM_DEV_STATUS_CB *p_cb)
626 tBTM_DEV_STATUS_CB *p_prev = btm_cb.devcb.p_dev_status_cb;
628 btm_cb.devcb.p_dev_status_cb = p_cb;
632 /*******************************************************************************
634 ** Function BTM_VendorSpecificCommand
636 ** Description Send a vendor specific HCI command to the controller.
639 ** BTM_SUCCESS Command sent. Does not expect command complete
640 ** event. (command cmpl callback param is NULL)
641 ** BTM_CMD_STARTED Command sent. Waiting for command cmpl event.
644 ** Opcode will be OR'd with HCI_GRP_VENDOR_SPECIFIC.
646 *******************************************************************************/
647 tBTM_STATUS BTM_VendorSpecificCommand(UINT16 opcode, UINT8 param_len,
648 UINT8 *p_param_buf, tBTM_VSC_CMPL_CB *p_cb)
652 BTM_TRACE_EVENT ("BTM: BTM_VendorSpecificCommand: Opcode: 0x%04X, ParamLen: %i.",
655 /* Allocate a buffer to hold HCI command plus the callback function */
656 if ((p_buf = GKI_getbuf((UINT16)(sizeof(BT_HDR) + sizeof (tBTM_CMPL_CB *) +
657 param_len + HCIC_PREAMBLE_SIZE))) != NULL)
659 /* Send the HCI command (opcode will be OR'd with HCI_GRP_VENDOR_SPECIFIC) */
660 btsnd_hcic_vendor_spec_cmd (p_buf, opcode, param_len, p_param_buf, (void *)p_cb);
664 return (BTM_CMD_STARTED);
666 return (BTM_SUCCESS);
669 return (BTM_NO_RESOURCES);
674 /*******************************************************************************
676 ** Function btm_vsc_complete
678 ** Description This function is called when local HCI Vendor Specific
679 ** Command complete message is received from the HCI.
683 *******************************************************************************/
684 void btm_vsc_complete (UINT8 *p, UINT16 opcode, UINT16 evt_len,
685 tBTM_CMPL_CB *p_vsc_cplt_cback)
687 tBTM_VSC_CMPL vcs_cplt_params;
689 /* If there was a callback address for vcs complete, call it */
690 if (p_vsc_cplt_cback)
692 /* Pass paramters to the callback function */
693 vcs_cplt_params.opcode = opcode; /* Number of bytes in return info */
694 vcs_cplt_params.param_len = evt_len; /* Number of bytes in return info */
695 vcs_cplt_params.p_param_buf = p;
696 (*p_vsc_cplt_cback)(&vcs_cplt_params); /* Call the VSC complete callback function */
700 /*******************************************************************************
702 ** Function BTM_RegisterForVSEvents
704 ** Description This function is called to register/deregister for vendor
705 ** specific HCI events.
707 ** If is_register=TRUE, then the function will be registered;
708 ** if is_register=FALSE, then the function will be deregistered.
710 ** Returns BTM_SUCCESS if successful,
711 ** BTM_BUSY if maximum number of callbacks have already been
714 *******************************************************************************/
715 tBTM_STATUS BTM_RegisterForVSEvents (tBTM_VS_EVT_CB *p_cb, BOOLEAN is_register)
717 tBTM_STATUS retval = BTM_SUCCESS;
718 UINT8 i, free_idx = BTM_MAX_VSE_CALLBACKS;
720 /* See if callback is already registered */
721 for (i=0; i<BTM_MAX_VSE_CALLBACKS; i++)
723 if (btm_cb.devcb.p_vend_spec_cb[i] == NULL)
725 /* Found a free slot. Store index */
728 else if (btm_cb.devcb.p_vend_spec_cb[i] == p_cb)
730 /* Found callback in lookup table. If deregistering, clear the entry. */
731 if (is_register == FALSE)
733 btm_cb.devcb.p_vend_spec_cb[i] = NULL;
734 BTM_TRACE_EVENT("BTM Deregister For VSEvents is successfully");
736 return (BTM_SUCCESS);
740 /* Didn't find callback. Add callback to free slot if registering */
743 if (free_idx < BTM_MAX_VSE_CALLBACKS)
745 btm_cb.devcb.p_vend_spec_cb[free_idx] = p_cb;
746 BTM_TRACE_EVENT("BTM Register For VSEvents is successfully");
750 /* No free entries available */
751 BTM_TRACE_ERROR ("BTM_RegisterForVSEvents: too many callbacks registered");
753 retval = BTM_NO_RESOURCES;
760 /*******************************************************************************
762 ** Function btm_vendor_specific_evt
764 ** Description Process event HCI_VENDOR_SPECIFIC_EVT
766 ** Note: Some controllers do not send command complete, so
767 ** the callback and busy flag are cleared here also.
771 *******************************************************************************/
772 void btm_vendor_specific_evt (UINT8 *p, UINT8 evt_len)
776 BTM_TRACE_DEBUG ("BTM Event: Vendor Specific event from controller");
778 for (i=0; i<BTM_MAX_VSE_CALLBACKS; i++)
780 if (btm_cb.devcb.p_vend_spec_cb[i])
781 (*btm_cb.devcb.p_vend_spec_cb[i])(evt_len, p);
786 /*******************************************************************************
788 ** Function BTM_WritePageTimeout
790 ** Description Send HCI Write Page Timeout.
793 ** BTM_SUCCESS Command sent.
794 ** BTM_NO_RESOURCES If out of resources to send the command.
797 *******************************************************************************/
798 tBTM_STATUS BTM_WritePageTimeout(UINT16 timeout)
800 BTM_TRACE_EVENT ("BTM: BTM_WritePageTimeout: Timeout: %d.", timeout);
802 /* Send the HCI command */
803 if (btsnd_hcic_write_page_tout (timeout))
804 return (BTM_SUCCESS);
806 return (BTM_NO_RESOURCES);
809 /*******************************************************************************
811 ** Function BTM_WriteVoiceSettings
813 ** Description Send HCI Write Voice Settings command.
814 ** See hcidefs.h for settings bitmask values.
817 ** BTM_SUCCESS Command sent.
818 ** BTM_NO_RESOURCES If out of resources to send the command.
821 *******************************************************************************/
822 tBTM_STATUS BTM_WriteVoiceSettings(UINT16 settings)
824 BTM_TRACE_EVENT ("BTM: BTM_WriteVoiceSettings: Settings: 0x%04x.", settings);
826 /* Send the HCI command */
827 if (btsnd_hcic_write_voice_settings ((UINT16)(settings & 0x03ff)))
828 return (BTM_SUCCESS);
830 return (BTM_NO_RESOURCES);
833 /*******************************************************************************
835 ** Function BTM_EnableTestMode
837 ** Description Send HCI the enable device under test command.
839 ** Note: Controller can only be taken out of this mode by
840 ** resetting the controller.
843 ** BTM_SUCCESS Command sent.
844 ** BTM_NO_RESOURCES If out of resources to send the command.
847 *******************************************************************************/
848 tBTM_STATUS BTM_EnableTestMode(void)
852 BTM_TRACE_EVENT ("BTM: BTM_EnableTestMode");
854 /* set auto accept connection as this is needed during test mode */
855 /* Allocate a buffer to hold HCI command */
856 cond = HCI_DO_AUTO_ACCEPT_CONNECT;
857 if (!btsnd_hcic_set_event_filter(HCI_FILTER_CONNECTION_SETUP,
858 HCI_FILTER_COND_NEW_DEVICE,
859 &cond, sizeof(cond)))
861 return (BTM_NO_RESOURCES);
864 /* put device to connectable mode */
865 if (!BTM_SetConnectability(BTM_CONNECTABLE, BTM_DEFAULT_CONN_WINDOW,
866 BTM_DEFAULT_CONN_INTERVAL) == BTM_SUCCESS)
868 return BTM_NO_RESOURCES;
871 /* put device to discoverable mode */
872 if (!BTM_SetDiscoverability(BTM_GENERAL_DISCOVERABLE, BTM_DEFAULT_DISC_WINDOW,
873 BTM_DEFAULT_DISC_INTERVAL) == BTM_SUCCESS)
875 return BTM_NO_RESOURCES;
878 /* mask off all of event from controller */
879 hci_layer_get_interface()->transmit_command(
880 hci_packet_factory_get_interface()->make_set_event_mask((const bt_event_mask_t *)("\x00\x00\x00\x00\x00\x00\x00\x00")),
885 /* Send the HCI command */
886 if (btsnd_hcic_enable_test_mode ())
887 return (BTM_SUCCESS);
889 return (BTM_NO_RESOURCES);
892 /*******************************************************************************
894 ** Function BTM_DeleteStoredLinkKey
896 ** Description This function is called to delete link key for the specified
897 ** device addresses from the NVRAM storage attached to the Bluetooth
900 ** Parameters: bd_addr - Addresses of the devices
901 ** p_cb - Call back function to be called to return
904 *******************************************************************************/
905 tBTM_STATUS BTM_DeleteStoredLinkKey(BD_ADDR bd_addr, tBTM_CMPL_CB *p_cb)
907 BD_ADDR local_bd_addr;
908 BOOLEAN delete_all_flag = FALSE;
910 /* Check if the previous command is completed */
911 if (btm_cb.devcb.p_stored_link_key_cmpl_cb)
916 /* This is to delete all link keys */
917 delete_all_flag = TRUE;
919 /* We don't care the BD address. Just pass a non zero pointer */
920 bd_addr = local_bd_addr;
923 BTM_TRACE_EVENT ("BTM: BTM_DeleteStoredLinkKey: delete_all_flag: %s",
924 delete_all_flag ? "TRUE" : "FALSE");
926 /* Send the HCI command */
927 btm_cb.devcb.p_stored_link_key_cmpl_cb = p_cb;
928 if (!btsnd_hcic_delete_stored_key (bd_addr, delete_all_flag))
930 return (BTM_NO_RESOURCES);
933 return (BTM_SUCCESS);
936 /*******************************************************************************
938 ** Function btm_delete_stored_link_key_complete
940 ** Description This function is called when the command complete message
941 ** is received from the HCI for the delete stored link key command.
945 *******************************************************************************/
946 void btm_delete_stored_link_key_complete (UINT8 *p)
948 tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_stored_link_key_cmpl_cb;
949 tBTM_DELETE_STORED_LINK_KEY_COMPLETE result;
951 /* If there was a callback registered for read stored link key, call it */
952 btm_cb.devcb.p_stored_link_key_cmpl_cb = NULL;
956 /* Set the call back event to indicate command complete */
957 result.event = BTM_CB_EVT_DELETE_STORED_LINK_KEYS;
959 /* Extract the result fields from the HCI event */
960 STREAM_TO_UINT8 (result.status, p);
961 STREAM_TO_UINT16 (result.num_keys, p);
963 /* Call the call back and pass the result */
968 /*******************************************************************************
970 ** Function btm_report_device_status
972 ** Description This function is called when there is a change in the device
973 ** status. This function will report the new device status to
978 *******************************************************************************/
979 void btm_report_device_status (tBTM_DEV_STATUS status)
981 tBTM_DEV_STATUS_CB *p_cb = btm_cb.devcb.p_dev_status_cb;
983 /* Call the call back to pass the device status to application */