4 # Copyright (c) 2000-2001 Silicon Graphics, Inc. All Rights Reserved.
6 # This program is free software; you can redistribute it and/or
7 # modify it under the terms of the GNU General Public License as
8 # published by the Free Software Foundation.
10 # This program is distributed in the hope that it would be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
24 sed -Ee 's/[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}/yyyy-mm-dd hh:mm:ss/'
27 _filter_vmstate_size()
29 sed -E -e 's/[0-9. ]{5} [KMGT]iB/ SIZE/' \
30 -e 's/[0-9. ]{5} B/ SIZE/'
33 _filter_generated_node_ids()
35 sed -Ee 's/\#block[0-9]{3,}/NODE_NAME/'
40 gsed -e '/Attached to:/s/\device[[0-9]\+\]/device[N]/g'
43 # replace occurrences of the actual TEST_DIR value with TEST_DIR
46 sed -e "s#$TEST_DIR/#TEST_DIR/#g" \
47 -e "s#$SOCK_DIR/#SOCK_DIR/#g" \
48 -e "s#SOCK_DIR/fuse-#TEST_DIR/#g"
51 # replace occurrences of the actual IMGFMT value with IMGFMT
54 sed -e "s#$IMGFMT#IMGFMT#g"
57 # Replace error message when the format is not supported and delete
58 # the output lines after the first one
59 _filter_qemu_img_check()
61 gsed -e '/allocated.*fragmented.*compressed clusters/d' \
62 -e 's/qemu-img: This image format does not support checks/No errors were found on the image./' \
63 -e '/Image end offset: [0-9]\+/d'
66 # Removes \r from messages
72 # sanitize qemu-io output
76 gsed -e "s/[0-9]* ops\; [0-9/:. sec]* ([0-9/.inf]* [EPTGMKiBbytes]*\/sec and [0-9/.inf]* ops\/sec)/X ops\; XX:XX:XX.X (XXX YYY\/sec and XXX ops\/sec)/" \
77 -e "s/: line [0-9][0-9]*: *[0-9][0-9]*\( Aborted\| Killed\)/:\1/" \
81 # replace occurrences of QEMU_PROG with "qemu"
84 gsed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
85 -e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#' \
86 -e $'s#\r##' # QEMU monitor uses \r\n line endings
89 # replace problematic QMP output like timestamps
93 gsed -e 's#\("\(micro\)\?seconds": \)[0-9]\+#\1 TIMESTAMP#g' \
94 -e 's#^{"QMP":.*}$#QMP_VERSION#' \
95 -e '/^ "QMP": {\s*$/, /^ }\s*$/ c\' \
99 # readline makes HMP command strings so long that git complains
102 gsed -e $'s/^\\((qemu) \\)\\?.*\e\\[D/\\1/g' \
106 # replace block job offset
107 _filter_block_job_offset()
109 gsed -e 's/, "offset": [0-9]\+,/, "offset": OFFSET,/'
112 # replace block job len
113 _filter_block_job_len()
115 gsed -e 's/, "len": [0-9]\+,/, "len": LEN,/g'
118 # replace actual image size (depends on the host filesystem)
119 _filter_actual_image_size()
121 gsed -s 's/\("actual-size":\s*\)[0-9]\+/\1SIZE/g'
124 # Filename filters for qemu-img create
125 _filter_img_create_filenames()
128 -e "s#$REMOTE_TEST_DIR#TEST_DIR#g" \
129 -e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
130 -e "s#$TEST_DIR#TEST_DIR#g" \
131 -e "s#$SOCK_DIR#SOCK_DIR#g" \
132 -e 's#SOCK_DIR/fuse-#TEST_DIR/#g' \
133 -e "s#$IMGFMT#IMGFMT#g" \
134 -e 's#nbd+unix:///\??socket=SOCK_DIR/nbd#TEST_DIR/t.IMGFMT#g'
137 # replace driver-specific options in the "Formatting..." line
138 _do_filter_img_create()
140 # Split the line into the pre-options part ($filename_part, which
141 # precedes ", fmt=") and the options part ($options, which starts
143 # (And just echo everything before the first "^Formatting")
144 readarray formatting_line < <(gsed -e 's/, fmt=/\n/')
146 filename_part=${formatting_line[0]}
147 unset formatting_line[0]
149 options="fmt=${formatting_line[@]}"
151 # Set grep_data_file to '\|data_file' to keep it; make it empty
153 # We want to drop it if it is part of the global $IMGOPTS, and we
154 # want to keep it otherwise (if the test specifically wants to
156 grep_data_file=(-e data_file)
157 if _get_data_file "$TEST_IMG" > /dev/null; then
161 filename_part=$(echo "$filename_part" | _filter_img_create_filenames)
163 # Break the option line before each option (preserving pre-existing
164 # line breaks by replacing them by \0 and restoring them at the end),
165 # then filter out the options we want to keep and sort them according
166 # to some order that all block drivers used at the time of writing
171 | gsed -e 's/ \([a-z0-9_.-]*\)=/\n\1=/g' \
172 | grep -a -e '^fmt' -e '^size' -e '^backing' -e '^preallocation' \
173 -e '^encryption' "${grep_data_file[@]}" \
174 | _filter_img_create_filenames \
176 -e 's/^\(fmt\)/0-\1/' \
177 -e 's/^\(size\)/1-\1/' \
178 -e 's/^\(backing\)/2-\1/' \
179 -e 's/^\(data_file\)/3-\1/' \
180 -e 's/^\(encryption\)/4-\1/' \
181 -e 's/^\(preallocation\)/8-\1/' \
183 | sed -e 's/^[0-9]-//' \
185 | sed -e 's/^ *$//' -e 's/ *$//'
188 if [ -n "$options" ]; then
189 echo "$filename_part, $options"
190 elif [ -n "$filename_part" ]; then
191 echo "$filename_part"
195 # Filter qemu-img create output:
196 # Pipe all ^Formatting lines through _do_filter_img_create, and all
197 # other lines through _filter_img_create_filenames
200 while read -r line; do
201 if echo "$line" | grep -q '^Formatting'; then
202 echo "$line" | _do_filter_img_create
204 echo "$line" | _filter_img_create_filenames
209 _filter_img_create_size()
211 gsed -e "s# size=[0-9]\\+# size=SIZE#g"
216 if [[ "$1" == "--format-specific" ]]; then
217 local format_specific=1
220 local format_specific=0
224 regex_json_spec_start='^ *"format-specific": \{'
225 regex_json_child_start='^ *"children": \['
226 gsed -e "s#$REMOTE_TEST_DIR#TEST_DIR#g" \
227 -e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
228 -e "s#$TEST_DIR#TEST_DIR#g" \
229 -e "s#$SOCK_DIR#SOCK_DIR#g" \
230 -e "s#$IMGFMT#IMGFMT#g" \
231 -e 's#nbd+unix:///\??socket=SOCK_DIR/nbd#TEST_DIR/t.IMGFMT#g' \
232 -e 's#SOCK_DIR/fuse-#TEST_DIR/#g' \
233 -e "/encrypted: yes/d" \
234 -e "/cluster_size: [0-9]\\+/d" \
235 -e "/table_size: [0-9]\\+/d" \
236 -e "/compat: '[^']*'/d" \
237 -e "/compat6: \\(on\\|off\\)/d" \
238 -e "s/cid: [0-9]\+/cid: XXXXXXXXXX/" \
239 -e "/static: \\(on\\|off\\)/d" \
240 -e "/zeroed_grain: \\(on\\|off\\)/d" \
241 -e "/subformat: '[^']*'/d" \
242 -e "/adapter_type: '[^']*'/d" \
243 -e "/hwversion: '[^']*'/d" \
244 -e "/lazy_refcounts: \\(on\\|off\\)/d" \
245 -e "/extended_l2=\\(on\\|off\\)/d" \
246 -e "/block_size: [0-9]\\+/d" \
247 -e "/block_state_zero: \\(on\\|off\\)/d" \
248 -e "/log_size: [0-9]\\+/d" \
249 -e "s/iters: [0-9]\\+/iters: 1024/" \
250 -e 's/\(compression type: \)\(zlib\|zstd\)/\1COMPRESSION_TYPE/' \
251 -e "s/uuid: [-a-f0-9]\\+/uuid: 00000000-0000-0000-0000-000000000000/" | \
252 while IFS='' read -r line; do
253 if [[ $discard == 0 ]]; then
254 if [[ $format_specific == 0 && $line == "Format specific information:" ]]; then
256 elif [[ $line =~ "Child node '/" ]]; then
258 elif [[ $line =~ $regex_json_spec_start ]]; then
260 regex_json_end="^${line%%[^ ]*}\\},? *$"
261 elif [[ $line =~ $regex_json_child_start ]]; then
263 regex_json_end="^${line%%[^ ]*}\\],? *$"
266 if [[ $discard == 0 ]]; then
268 elif [[ $discard == 1 && ! $line ]]; then
271 elif [[ $discard == 2 && $line =~ $regex_json_end ]]; then
277 # filter out offsets and file names from qemu-img map; good for both
278 # human and json output
279 _filter_qemu_img_map()
281 # Assuming the data_file value in $IMGOPTS contains a '$TEST_IMG',
282 # create a filter that replaces the data file name by $TEST_IMG.
284 # In $IMGOPTS: 'data_file=$TEST_IMG.data_file'
285 # Then data_file_pattern == '\(.*\).data_file'
286 # And data_file_filter == -e 's#\(.*\).data_file#\1#
288 if data_file_pattern=$(_get_data_file '\\(.*\\)'); then
289 data_file_filter=(-e "s#$data_file_pattern#\\1#")
292 sed -e 's/\([0-9a-fx]* *[0-9a-fx]* *\)[0-9a-fx]* */\1/g' \
293 -e 's/"offset": [0-9]\+/"offset": OFFSET/g' \
294 -e 's/Mapped to *//' \
295 "${data_file_filter[@]}" \
296 | _filter_testdir | _filter_imgfmt
301 # nbd.c error messages contain function names and line numbers that are
302 # prone to change. Message ordering depends on timing between send and
303 # receive callbacks sometimes, making them unreliable.
305 # Filter out the TCP port number since this changes between runs.
306 sed -e '/nbd\/.*\.c:/d' \
307 -e 's#127\.0\.0\.1:[0-9]*#127.0.0.1:PORT#g' \
308 -e 's#localhost:[0-9]*#localhost:PORT#g' \
309 -e 's#host=127\.0\.0\.1,port=[0-9]*#host=127.0.0.1,port=PORT#g' \
310 -e 's#host=localhost,port=[0-9]*#host=localhost,port=PORT#g' \
311 -e "s#path=$SOCK_DIR#path=SOCK_DIR#g" \
312 -e "s#?socket=$SOCK_DIR#?socket=SOCK_DIR#g" \
313 -e 's#\(foo\|PORT/\?\|.sock\): Failed to .*$#\1#'
316 _filter_qemu_nbd_exports()
318 grep '\(exports available\|export\|size\|min block\|qemu-nbd\):'
321 _filter_qmp_empty_return()
323 grep -v '{"return": {}}'
326 _filter_json_filename()
328 $PYTHON -c 'import sys
329 result, *fnames = sys.stdin.read().split("json:{")
332 depth += 1 # For the opening brace in the split separator
333 for chr_i, chr in enumerate(fname):
341 # json:{} filenames may be nested; filter out everything from
342 # inside the outermost one
344 chr_i += 1 # First character past the filename
345 result += "json:{ /* filtered */ }" + fname[chr_i:]
347 sys.stdout.write(result)'
350 _filter_authz_check_tls()
352 sed -e 's/TLS x509 authz check for .* is denied/TLS x509 authz check for DISTINGUISHED-NAME is denied/'
355 _filter_qcow2_compression_type_bit()
357 gsed -e 's/\(incompatible_features\s\+\)\[3\(, \)\?/\1[/' \
358 -e 's/\(incompatible_features.*\), 3\]/\1]/' \
359 -e 's/\(incompatible_features.*\), 3\(,.*\)/\1\2/'
362 # filter warnings caused for block migration deprecation
363 _filter_migration_block_deprecated()
365 gsed -e '/warning: parameter .blk. is deprecated; use blockdev-mirror with NBD instead/d' \
366 -e '/warning: block migration is deprecated; use blockdev-mirror with NBD instead/d'
369 # make sure this script returns success