tools/misc/imx_usb_loader/mx6_usb_work.conf

   1 mx6_qsb
   2 #hid/bulk,[old_header,]max packet size, {ram start, ram size}(repeat valid ram areas)
   3 hid,1024,0x10000000,1G,0x00907000,0x31000
   4 #file:dcd,plug,load nnn,jump [nnn/header/header2]
   5 #jump nnn - header is after last downloaded word
   6 #            entire file is loaded before jump, needs load nnn as well
   7 # i.e. file:load nnn,jump nnn
   8 #jump header - only length parameter is downloaded
   9 #header - uses existing header(error if none), but clears plug and dcd values unless plug also specified
  10 #header2 - uses 2nd header found(error if none)
  11 #plug - without jump uses header but clears plug flag to stop after plug execution
  12 #load nnn - load entire file to address
  13 #../u-boot-imx6/u-boot.bin:dcd,plug,jump header
  14 #:modify,020e02a8,7,1
  15 #:modify,020e00bc,7,4
  16 #:read,020e02a8
  17 #:read,020e00bc
  18 #:read,020c4078
  19 #:modify,020c407c,0,0f000000
  20 #:modify,020c4080,0,c00
  21 #:read,020c4084
  22 #../imx_utils/mx6_ddr_init_xm.bin:dcd
  23 #../u-boot-imx6/u-boot.bin:load 0x13effc00
  24 #../u-boot-imx6/u-boot.imx:load 0x13f00000
  25 #../u-boot-dirk/u-boot.imx:load 0x13f00000
  26 #u-boot-6w.bin:load 0x13effc00
  27 #u-boot_1103.bin:load 0x13effc00
  28 #u-boot_1103.bin:jump header
  29 #../imx_utils/mx6_ecspi_ram_write_xm.bin:clear_dcd,plug
  30 #../imx6_obds/output/mx61/bin/diag-obds-mx61qsb-rev1.bin:jump header