2 # Guess values for system-dependent variables and create Makefiles.
3 # Generated by GNU Autoconf 2.59.
5 # Copyright (C) 2003 Free Software Foundation, Inc.
6 # This configure script is free software; the Free Software Foundation
7 # gives unlimited permission to copy, distribute and modify it.
8 ## --------------------- ##
9 ## M4sh Initialization. ##
10 ## --------------------- ##
12 # Be Bourne compatible
13 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
16 # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
17 # is contrary to our usage. Disable this feature.
18 alias -g '${1+"$@"}'='"$@"'
19 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
22 DUALCASE=1; export DUALCASE # for MKS sh
24 # Support unset when possible.
25 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
32 # Work around bugs in pre-3.0 UWIN ksh.
33 $as_unset ENV MAIL MAILPATH
40 LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
41 LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
44 if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
45 eval $as_var=C; export $as_var
51 # Required to use basename.
52 if expr a : '\(a\)' >/dev/null 2>&1; then
58 if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
65 # Name of the executable.
66 as_me=`$as_basename "$0" ||
67 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
68 X"$0" : 'X\(//\)$' \| \
69 X"$0" : 'X\(/\)$' \| \
70 . : '\(.\)' 2>/dev/null ||
72 sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
73 /^X\/\(\/\/\)$/{ s//\1/; q; }
74 /^X\/\(\/\).*/{ s//\1/; q; }
78 # PATH needs CR, and LINENO needs CR and PATH.
79 # Avoid depending upon Character Ranges.
80 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
81 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
82 as_cr_Letters=$as_cr_letters$as_cr_LETTERS
83 as_cr_digits='0123456789'
84 as_cr_alnum=$as_cr_Letters$as_cr_digits
86 # The user is always right.
87 if test "${PATH_SEPARATOR+set}" != set; then
88 echo "#! /bin/sh" >conf$$.sh
89 echo "exit 0" >>conf$$.sh
91 if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
102 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
103 test "x$as_lineno_1" != "x$as_lineno_2" &&
104 test "x$as_lineno_3" = "x$as_lineno_2" || {
105 # Find who we are. Look in the path if we contain no path at all
108 *[\\/]* ) as_myself=$0 ;;
109 *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
113 test -z "$as_dir" && as_dir=.
114 test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
119 # We did not find ourselves, most probably we were run as `sh COMMAND'
120 # in which case we are not to be found in the path.
121 if test "x$as_myself" = x; then
124 if test ! -f "$as_myself"; then
125 { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
126 { (exit 1); exit 1; }; }
128 case $CONFIG_SHELL in
130 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
131 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
134 test -z "$as_dir" && as_dir=.
135 for as_base in sh bash ksh sh5; do
138 if ("$as_dir/$as_base" -c '
141 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
142 test "x$as_lineno_1" != "x$as_lineno_2" &&
143 test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
144 $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
145 $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
146 CONFIG_SHELL=$as_dir/$as_base
148 exec "$CONFIG_SHELL" "$0" ${1+"$@"}
156 # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
157 # uniformly replaced by the line number. The first 'sed' inserts a
158 # line-number line before each line; the second 'sed' does the real
159 # work. The second script uses 'N' to pair each line-number line
160 # with the numbered line, and appends trailing '-' during
161 # substitution so that $LINENO is not a special case at line end.
162 # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
163 # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
164 sed '=' <$as_myself |
169 s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
172 s,^['$as_cr_digits']*\n,,
174 chmod +x $as_me.lineno ||
175 { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
176 { (exit 1); exit 1; }; }
178 # Don't try to exec as it changes $[0], causing all sort of problems
179 # (the dirname of $[0] is not the place where we might find the
180 # original and so on. Autoconf is especially sensible to this).
182 # Exit status is that of the last command.
187 case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
188 *c*,-n*) ECHO_N= ECHO_C='
190 *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
191 *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
194 if expr a : '\(a\)' >/dev/null 2>&1; then
200 rm -f conf$$ conf$$.exe conf$$.file
202 if ln -s conf$$.file conf$$ 2>/dev/null; then
203 # We could just check for DJGPP; but this test a) works b) is more generic
204 # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
205 if test -f conf$$.exe; then
206 # Don't use ln at all; we don't have any links
211 elif ln conf$$.file conf$$ 2>/dev/null; then
216 rm -f conf$$ conf$$.exe conf$$.file
218 if mkdir -p . 2>/dev/null; then
221 test -d ./-p && rmdir ./-p
225 as_executable_p="test -f"
227 # Sed expression to map a string onto a valid CPP name.
228 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
230 # Sed expression to map a string onto a valid variable name.
231 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
235 # We need space, tab and new line, in precisely that order.
245 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
246 # so uname gets run too.
247 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
254 ac_default_prefix=/usr/local
255 ac_config_libobj_dir=.
260 SHELL=${CONFIG_SHELL-/bin/sh}
262 # Maximum number of lines to put in a shell here document.
263 # This variable seems obsolete. It should probably be removed, and
264 # only ac_max_sed_lines should be used.
265 : ${ac_max_here_lines=38}
267 # Identity of this package.
274 ac_unique_file="Makefile.in"
275 ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os all_subdirs install_subdirs mostlyclean_subdirs clean_subdirs distclean_subdirs maintainer_clean_subdirs this_srcdir subconfigure_args LIBOBJS LTLIBOBJS'
278 # Initialize some variables set by options.
280 ac_init_version=false
281 # The variables have the same names as the options, with
282 # dashes changed to underlines.
290 program_transform_name=s,x,x,
298 # Installation directory options.
299 # These are left unexpanded so users can "make install exec_prefix=/foo"
300 # and all the variables that are supposed to be based on exec_prefix
301 # by default will actually change.
302 # Use braces instead of parens because sh, perl, etc. also accept them.
303 bindir='${exec_prefix}/bin'
304 sbindir='${exec_prefix}/sbin'
305 libexecdir='${exec_prefix}/libexec'
306 datadir='${prefix}/share'
307 sysconfdir='${prefix}/etc'
308 sharedstatedir='${prefix}/com'
309 localstatedir='${prefix}/var'
310 libdir='${exec_prefix}/lib'
311 includedir='${prefix}/include'
312 oldincludedir='/usr/include'
313 infodir='${prefix}/info'
314 mandir='${prefix}/man'
319 # If the previous option needs an argument, assign it.
320 if test -n "$ac_prev"; then
321 eval "$ac_prev=\$ac_option"
326 ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
328 # Accept the important Cygnus configure options, so we can diagnose typos.
332 -bindir | --bindir | --bindi | --bind | --bin | --bi)
334 -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
337 -build | --build | --buil | --bui | --bu)
338 ac_prev=build_alias ;;
339 -build=* | --build=* | --buil=* | --bui=* | --bu=*)
340 build_alias=$ac_optarg ;;
342 -cache-file | --cache-file | --cache-fil | --cache-fi \
343 | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
344 ac_prev=cache_file ;;
345 -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
346 | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
347 cache_file=$ac_optarg ;;
350 cache_file=config.cache ;;
352 -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
354 -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
356 datadir=$ac_optarg ;;
358 -disable-* | --disable-*)
359 ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
360 # Reject names that are not valid shell variable names.
361 expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
362 { echo "$as_me: error: invalid feature name: $ac_feature" >&2
363 { (exit 1); exit 1; }; }
364 ac_feature=`echo $ac_feature | sed 's/-/_/g'`
365 eval "enable_$ac_feature=no" ;;
367 -enable-* | --enable-*)
368 ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
369 # Reject names that are not valid shell variable names.
370 expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
371 { echo "$as_me: error: invalid feature name: $ac_feature" >&2
372 { (exit 1); exit 1; }; }
373 ac_feature=`echo $ac_feature | sed 's/-/_/g'`
375 *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
378 eval "enable_$ac_feature='$ac_optarg'" ;;
380 -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
381 | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
382 | --exec | --exe | --ex)
383 ac_prev=exec_prefix ;;
384 -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
385 | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
386 | --exec=* | --exe=* | --ex=*)
387 exec_prefix=$ac_optarg ;;
389 -gas | --gas | --ga | --g)
390 # Obsolete; use --with-gas.
393 -help | --help | --hel | --he | -h)
395 -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
396 ac_init_help=recursive ;;
397 -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
398 ac_init_help=short ;;
400 -host | --host | --hos | --ho)
401 ac_prev=host_alias ;;
402 -host=* | --host=* | --hos=* | --ho=*)
403 host_alias=$ac_optarg ;;
405 -includedir | --includedir | --includedi | --included | --include \
406 | --includ | --inclu | --incl | --inc)
407 ac_prev=includedir ;;
408 -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
409 | --includ=* | --inclu=* | --incl=* | --inc=*)
410 includedir=$ac_optarg ;;
412 -infodir | --infodir | --infodi | --infod | --info | --inf)
414 -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
415 infodir=$ac_optarg ;;
417 -libdir | --libdir | --libdi | --libd)
419 -libdir=* | --libdir=* | --libdi=* | --libd=*)
422 -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
423 | --libexe | --libex | --libe)
424 ac_prev=libexecdir ;;
425 -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
426 | --libexe=* | --libex=* | --libe=*)
427 libexecdir=$ac_optarg ;;
429 -localstatedir | --localstatedir | --localstatedi | --localstated \
430 | --localstate | --localstat | --localsta | --localst \
431 | --locals | --local | --loca | --loc | --lo)
432 ac_prev=localstatedir ;;
433 -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
434 | --localstate=* | --localstat=* | --localsta=* | --localst=* \
435 | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
436 localstatedir=$ac_optarg ;;
438 -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
440 -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
444 # Obsolete; use --without-fp.
447 -no-create | --no-create | --no-creat | --no-crea | --no-cre \
448 | --no-cr | --no-c | -n)
451 -no-recursion | --no-recursion | --no-recursio | --no-recursi \
452 | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
455 -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
456 | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
457 | --oldin | --oldi | --old | --ol | --o)
458 ac_prev=oldincludedir ;;
459 -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
460 | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
461 | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
462 oldincludedir=$ac_optarg ;;
464 -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
466 -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
469 -program-prefix | --program-prefix | --program-prefi | --program-pref \
470 | --program-pre | --program-pr | --program-p)
471 ac_prev=program_prefix ;;
472 -program-prefix=* | --program-prefix=* | --program-prefi=* \
473 | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
474 program_prefix=$ac_optarg ;;
476 -program-suffix | --program-suffix | --program-suffi | --program-suff \
477 | --program-suf | --program-su | --program-s)
478 ac_prev=program_suffix ;;
479 -program-suffix=* | --program-suffix=* | --program-suffi=* \
480 | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
481 program_suffix=$ac_optarg ;;
483 -program-transform-name | --program-transform-name \
484 | --program-transform-nam | --program-transform-na \
485 | --program-transform-n | --program-transform- \
486 | --program-transform | --program-transfor \
487 | --program-transfo | --program-transf \
488 | --program-trans | --program-tran \
489 | --progr-tra | --program-tr | --program-t)
490 ac_prev=program_transform_name ;;
491 -program-transform-name=* | --program-transform-name=* \
492 | --program-transform-nam=* | --program-transform-na=* \
493 | --program-transform-n=* | --program-transform-=* \
494 | --program-transform=* | --program-transfor=* \
495 | --program-transfo=* | --program-transf=* \
496 | --program-trans=* | --program-tran=* \
497 | --progr-tra=* | --program-tr=* | --program-t=*)
498 program_transform_name=$ac_optarg ;;
500 -q | -quiet | --quiet | --quie | --qui | --qu | --q \
501 | -silent | --silent | --silen | --sile | --sil)
504 -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
506 -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
508 sbindir=$ac_optarg ;;
510 -sharedstatedir | --sharedstatedir | --sharedstatedi \
511 | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
512 | --sharedst | --shareds | --shared | --share | --shar \
514 ac_prev=sharedstatedir ;;
515 -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
516 | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
517 | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
519 sharedstatedir=$ac_optarg ;;
521 -site | --site | --sit)
523 -site=* | --site=* | --sit=*)
526 -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
528 -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
531 -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
532 | --syscon | --sysco | --sysc | --sys | --sy)
533 ac_prev=sysconfdir ;;
534 -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
535 | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
536 sysconfdir=$ac_optarg ;;
538 -target | --target | --targe | --targ | --tar | --ta | --t)
539 ac_prev=target_alias ;;
540 -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
541 target_alias=$ac_optarg ;;
543 -v | -verbose | --verbose | --verbos | --verbo | --verb)
546 -version | --version | --versio | --versi | --vers | -V)
550 ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
551 # Reject names that are not valid shell variable names.
552 expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
553 { echo "$as_me: error: invalid package name: $ac_package" >&2
554 { (exit 1); exit 1; }; }
555 ac_package=`echo $ac_package| sed 's/-/_/g'`
557 *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
560 eval "with_$ac_package='$ac_optarg'" ;;
562 -without-* | --without-*)
563 ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
564 # Reject names that are not valid shell variable names.
565 expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
566 { echo "$as_me: error: invalid package name: $ac_package" >&2
567 { (exit 1); exit 1; }; }
568 ac_package=`echo $ac_package | sed 's/-/_/g'`
569 eval "with_$ac_package=no" ;;
572 # Obsolete; use --with-x.
575 -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
576 | --x-incl | --x-inc | --x-in | --x-i)
577 ac_prev=x_includes ;;
578 -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
579 | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
580 x_includes=$ac_optarg ;;
582 -x-libraries | --x-libraries | --x-librarie | --x-librari \
583 | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
584 ac_prev=x_libraries ;;
585 -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
586 | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
587 x_libraries=$ac_optarg ;;
589 -*) { echo "$as_me: error: unrecognized option: $ac_option
590 Try \`$0 --help' for more information." >&2
591 { (exit 1); exit 1; }; }
595 ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
596 # Reject names that are not valid shell variable names.
597 expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
598 { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
599 { (exit 1); exit 1; }; }
600 ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
601 eval "$ac_envvar='$ac_optarg'"
605 # FIXME: should be removed in autoconf 3.0.
606 echo "$as_me: WARNING: you should use --build, --host, --target" >&2
607 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
608 echo "$as_me: WARNING: invalid host type: $ac_option" >&2
609 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
615 if test -n "$ac_prev"; then
616 ac_option=--`echo $ac_prev | sed 's/_/-/g'`
617 { echo "$as_me: error: missing argument to $ac_option" >&2
618 { (exit 1); exit 1; }; }
621 # Be sure to have absolute paths.
622 for ac_var in exec_prefix prefix
624 eval ac_val=$`echo $ac_var`
626 [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
627 *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
628 { (exit 1); exit 1; }; };;
632 # Be sure to have absolute paths.
633 for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
634 localstatedir libdir includedir oldincludedir infodir mandir
636 eval ac_val=$`echo $ac_var`
638 [\\/$]* | ?:[\\/]* ) ;;
639 *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
640 { (exit 1); exit 1; }; };;
644 # There might be people who depend on the old broken behavior: `$host'
645 # used to hold the argument of --host etc.
646 # FIXME: To remove some day.
651 # FIXME: To remove some day.
652 if test "x$host_alias" != x; then
653 if test "x$build_alias" = x; then
654 cross_compiling=maybe
655 echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
656 If a cross compiler is detected then cross compile mode will be used." >&2
657 elif test "x$build_alias" != "x$host_alias"; then
663 test -n "$host_alias" && ac_tool_prefix=$host_alias-
665 test "$silent" = yes && exec 6>/dev/null
668 # Find the source files, if location was not specified.
669 if test -z "$srcdir"; then
670 ac_srcdir_defaulted=yes
671 # Try the directory containing this script, then its parent.
672 ac_confdir=`(dirname "$0") 2>/dev/null ||
673 $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
674 X"$0" : 'X\(//\)[^/]' \| \
675 X"$0" : 'X\(//\)$' \| \
676 X"$0" : 'X\(/\)' \| \
677 . : '\(.\)' 2>/dev/null ||
679 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
680 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
681 /^X\(\/\/\)$/{ s//\1/; q; }
682 /^X\(\/\).*/{ s//\1/; q; }
685 if test ! -r $srcdir/$ac_unique_file; then
689 ac_srcdir_defaulted=no
691 if test ! -r $srcdir/$ac_unique_file; then
692 if test "$ac_srcdir_defaulted" = yes; then
693 { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
694 { (exit 1); exit 1; }; }
696 { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
697 { (exit 1); exit 1; }; }
700 (cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
701 { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
702 { (exit 1); exit 1; }; }
703 srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
704 ac_env_build_alias_set=${build_alias+set}
705 ac_env_build_alias_value=$build_alias
706 ac_cv_env_build_alias_set=${build_alias+set}
707 ac_cv_env_build_alias_value=$build_alias
708 ac_env_host_alias_set=${host_alias+set}
709 ac_env_host_alias_value=$host_alias
710 ac_cv_env_host_alias_set=${host_alias+set}
711 ac_cv_env_host_alias_value=$host_alias
712 ac_env_target_alias_set=${target_alias+set}
713 ac_env_target_alias_value=$target_alias
714 ac_cv_env_target_alias_set=${target_alias+set}
715 ac_cv_env_target_alias_value=$target_alias
718 # Report the --help message.
720 if test "$ac_init_help" = "long"; then
721 # Omit some internal or obsolete options to make the list less imposing.
722 # This message is too long to be a string in the A/UX 3.1 sh.
724 \`configure' configures this package to adapt to many kinds of systems.
726 Usage: $0 [OPTION]... [VAR=VALUE]...
728 To assign environment variables (e.g., CC, CFLAGS...), specify them as
729 VAR=VALUE. See below for descriptions of some of the useful variables.
731 Defaults for the options are specified in brackets.
734 -h, --help display this help and exit
735 --help=short display options specific to this package
736 --help=recursive display the short help of all the included packages
737 -V, --version display version information and exit
738 -q, --quiet, --silent do not print \`checking...' messages
739 --cache-file=FILE cache test results in FILE [disabled]
740 -C, --config-cache alias for \`--cache-file=config.cache'
741 -n, --no-create do not create output files
742 --srcdir=DIR find the sources in DIR [configure dir or \`..']
747 Installation directories:
748 --prefix=PREFIX install architecture-independent files in PREFIX
750 --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
753 By default, \`make install' will install all the files in
754 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
755 an installation prefix other than \`$ac_default_prefix' using \`--prefix',
756 for instance \`--prefix=\$HOME'.
758 For better control, use the options below.
760 Fine tuning of the installation directories:
761 --bindir=DIR user executables [EPREFIX/bin]
762 --sbindir=DIR system admin executables [EPREFIX/sbin]
763 --libexecdir=DIR program executables [EPREFIX/libexec]
764 --datadir=DIR read-only architecture-independent data [PREFIX/share]
765 --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
766 --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
767 --localstatedir=DIR modifiable single-machine data [PREFIX/var]
768 --libdir=DIR object code libraries [EPREFIX/lib]
769 --includedir=DIR C header files [PREFIX/include]
770 --oldincludedir=DIR C header files for non-gcc [/usr/include]
771 --infodir=DIR info documentation [PREFIX/info]
772 --mandir=DIR man documentation [PREFIX/man]
778 --build=BUILD configure for building on BUILD [guessed]
779 --host=HOST cross-compile to build programs to run on HOST [BUILD]
780 --target=TARGET configure for building compilers for TARGET [HOST]
784 if test -n "$ac_init_help"; then
791 if test "$ac_init_help" = "recursive"; then
792 # If there are subdirs, report their specific --help.
794 for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
795 test -d $ac_dir || continue
798 if test "$ac_dir" != .; then
799 ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
800 # A "../" for each directory in $ac_dir_suffix.
801 ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
803 ac_dir_suffix= ac_top_builddir=
807 .) # No --srcdir option. We are building in place.
809 if test -z "$ac_top_builddir"; then
812 ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
814 [\\/]* | ?:[\\/]* ) # Absolute path.
815 ac_srcdir=$srcdir$ac_dir_suffix;
816 ac_top_srcdir=$srcdir ;;
818 ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
819 ac_top_srcdir=$ac_top_builddir$srcdir ;;
822 # Do not use `cd foo && pwd` to compute absolute paths, because
823 # the directories may not exist.
825 .) ac_abs_builddir="$ac_dir";;
828 .) ac_abs_builddir=`pwd`;;
829 [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
830 *) ac_abs_builddir=`pwd`/"$ac_dir";;
833 case $ac_abs_builddir in
834 .) ac_abs_top_builddir=${ac_top_builddir}.;;
836 case ${ac_top_builddir}. in
837 .) ac_abs_top_builddir=$ac_abs_builddir;;
838 [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
839 *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
842 case $ac_abs_builddir in
843 .) ac_abs_srcdir=$ac_srcdir;;
846 .) ac_abs_srcdir=$ac_abs_builddir;;
847 [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
848 *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
851 case $ac_abs_builddir in
852 .) ac_abs_top_srcdir=$ac_top_srcdir;;
854 case $ac_top_srcdir in
855 .) ac_abs_top_srcdir=$ac_abs_builddir;;
856 [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
857 *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
862 # Check for guested configure; otherwise get Cygnus style configure.
863 if test -f $ac_srcdir/configure.gnu; then
865 $SHELL $ac_srcdir/configure.gnu --help=recursive
866 elif test -f $ac_srcdir/configure; then
868 $SHELL $ac_srcdir/configure --help=recursive
869 elif test -f $ac_srcdir/configure.ac ||
870 test -f $ac_srcdir/configure.in; then
874 echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
880 test -n "$ac_init_help" && exit 0
881 if $ac_init_version; then
884 Copyright (C) 2003 Free Software Foundation, Inc.
885 This configure script is free software; the Free Software Foundation
886 gives unlimited permission to copy, distribute and modify it.
892 This file contains any messages produced by compilers while
893 running configure, to aid debugging if configure makes a mistake.
895 It was created by $as_me, which was
896 generated by GNU Autoconf 2.59. Invocation command line was
907 hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
908 uname -m = `(uname -m) 2>/dev/null || echo unknown`
909 uname -r = `(uname -r) 2>/dev/null || echo unknown`
910 uname -s = `(uname -s) 2>/dev/null || echo unknown`
911 uname -v = `(uname -v) 2>/dev/null || echo unknown`
913 /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
914 /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
916 /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
917 /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
918 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
919 hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
920 /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
921 /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
922 /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
926 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
930 test -z "$as_dir" && as_dir=.
946 # Keep a trace of the command line.
947 # Strip out --no-create and --no-recursion so they do not pile up.
948 # Strip out --silent because we don't want to record it for future runs.
949 # Also quote any args containing shell meta-characters.
950 # Make two passes to allow for proper duplicate-argument suppression.
955 ac_must_keep_next=false
961 -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
962 -q | -quiet | --quiet | --quie | --qui | --qu | --q \
963 | -silent | --silent | --silen | --sile | --sil)
965 *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
966 ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
969 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
971 ac_configure_args1="$ac_configure_args1 '$ac_arg'"
972 if test $ac_must_keep_next = true; then
973 ac_must_keep_next=false # Got value, back to normal.
976 *=* | --config-cache | -C | -disable-* | --disable-* \
977 | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
978 | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
979 | -with-* | --with-* | -without-* | --without-* | --x)
980 case "$ac_configure_args0 " in
981 "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
984 -* ) ac_must_keep_next=true ;;
987 ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
988 # Get rid of the leading space.
994 $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
995 $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
997 # When interrupted or exit'd, cleanup temporary files, and complete
998 # config.log. We remove comments because anyway the quotes in there
999 # would cause problems or look ugly.
1000 # WARNING: Be sure not to use single quotes in there, as some shells,
1001 # such as our DU 5.0 friend, will then `close' the trap.
1002 trap 'exit_status=$?
1003 # Save into config.log some information that might help in debugging.
1008 ## ---------------- ##
1009 ## Cache variables. ##
1010 ## ---------------- ##
1013 # The following way of writing the cache mishandles newlines in values,
1016 case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
1019 "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
1020 s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
1024 "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1031 ## ----------------- ##
1032 ## Output variables. ##
1033 ## ----------------- ##
1036 for ac_var in $ac_subst_vars
1038 eval ac_val=$`echo $ac_var`
1039 echo "$ac_var='"'"'$ac_val'"'"'"
1043 if test -n "$ac_subst_files"; then
1050 for ac_var in $ac_subst_files
1052 eval ac_val=$`echo $ac_var`
1053 echo "$ac_var='"'"'$ac_val'"'"'"
1058 if test -s confdefs.h; then
1065 sed "/^$/d" confdefs.h | sort
1068 test "$ac_signal" != 0 &&
1069 echo "$as_me: caught signal $ac_signal"
1070 echo "$as_me: exit $exit_status"
1072 rm -f core *.core &&
1073 rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
1076 for ac_signal in 1 2 13 15; do
1077 trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
1081 # confdefs.h avoids OS command line length limits that DEFS can exceed.
1082 rm -rf conftest* confdefs.h
1083 # AIX cpp loses on an empty file, so make sure it contains at least a newline.
1086 # Predefined preprocessor variables.
1088 cat >>confdefs.h <<_ACEOF
1089 #define PACKAGE_NAME "$PACKAGE_NAME"
1093 cat >>confdefs.h <<_ACEOF
1094 #define PACKAGE_TARNAME "$PACKAGE_TARNAME"
1098 cat >>confdefs.h <<_ACEOF
1099 #define PACKAGE_VERSION "$PACKAGE_VERSION"
1103 cat >>confdefs.h <<_ACEOF
1104 #define PACKAGE_STRING "$PACKAGE_STRING"
1108 cat >>confdefs.h <<_ACEOF
1109 #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
1113 # Let the site file select an alternate cache file if it wants to.
1114 # Prefer explicitly selected file to automatically selected ones.
1115 if test -z "$CONFIG_SITE"; then
1116 if test "x$prefix" != xNONE; then
1117 CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
1119 CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
1122 for ac_site_file in $CONFIG_SITE; do
1123 if test -r "$ac_site_file"; then
1124 { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
1125 echo "$as_me: loading site script $ac_site_file" >&6;}
1126 sed 's/^/| /' "$ac_site_file" >&5
1131 if test -r "$cache_file"; then
1132 # Some versions of bash will fail to source /dev/null (special
1133 # files actually), so we avoid doing that.
1134 if test -f "$cache_file"; then
1135 { echo "$as_me:$LINENO: loading cache $cache_file" >&5
1136 echo "$as_me: loading cache $cache_file" >&6;}
1138 [\\/]* | ?:[\\/]* ) . $cache_file;;
1139 *) . ./$cache_file;;
1143 { echo "$as_me:$LINENO: creating cache $cache_file" >&5
1144 echo "$as_me: creating cache $cache_file" >&6;}
1148 # Check that the precious variables saved in the cache have kept the same
1150 ac_cache_corrupted=false
1151 for ac_var in `(set) 2>&1 |
1152 sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
1153 eval ac_old_set=\$ac_cv_env_${ac_var}_set
1154 eval ac_new_set=\$ac_env_${ac_var}_set
1155 eval ac_old_val="\$ac_cv_env_${ac_var}_value"
1156 eval ac_new_val="\$ac_env_${ac_var}_value"
1157 case $ac_old_set,$ac_new_set in
1159 { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
1160 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
1161 ac_cache_corrupted=: ;;
1163 { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
1164 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
1165 ac_cache_corrupted=: ;;
1168 if test "x$ac_old_val" != "x$ac_new_val"; then
1169 { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
1170 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
1171 { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
1172 echo "$as_me: former value: $ac_old_val" >&2;}
1173 { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
1174 echo "$as_me: current value: $ac_new_val" >&2;}
1175 ac_cache_corrupted=:
1178 # Pass precious variables to config.status.
1179 if test "$ac_new_set" = set; then
1181 *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
1182 ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
1183 *) ac_arg=$ac_var=$ac_new_val ;;
1185 case " $ac_configure_args " in
1186 *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
1187 *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
1191 if $ac_cache_corrupted; then
1192 { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
1193 echo "$as_me: error: changes in the environment can compromise the build" >&2;}
1194 { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
1195 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
1196 { (exit 1); exit 1; }; }
1200 ac_cpp='$CPP $CPPFLAGS'
1201 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1202 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
1203 ac_compiler_gnu=$ac_cv_c_compiler_gnu
1227 for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
1228 if test -f $ac_dir/install-sh; then
1230 ac_install_sh="$ac_aux_dir/install-sh -c"
1232 elif test -f $ac_dir/install.sh; then
1234 ac_install_sh="$ac_aux_dir/install.sh -c"
1236 elif test -f $ac_dir/shtool; then
1238 ac_install_sh="$ac_aux_dir/shtool install -c"
1242 if test -z "$ac_aux_dir"; then
1243 { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
1244 echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
1245 { (exit 1); exit 1; }; }
1247 ac_config_guess="$SHELL $ac_aux_dir/config.guess"
1248 ac_config_sub="$SHELL $ac_aux_dir/config.sub"
1249 ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
1251 # Find a good install program. We prefer a C program (faster),
1252 # so one script is as good as another. But avoid the broken or
1253 # incompatible versions:
1254 # SysV /etc/install, /usr/sbin/install
1255 # SunOS /usr/etc/install
1256 # IRIX /sbin/install
1258 # AmigaOS /C/install, which installs bootblocks on floppy discs
1259 # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
1260 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
1261 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1262 # OS/2's system install, which has a completely different semantic
1263 # ./install, which can be erroneously created by make from ./install.sh.
1264 echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1265 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
1266 if test -z "$INSTALL"; then
1267 if test "${ac_cv_path_install+set}" = set; then
1268 echo $ECHO_N "(cached) $ECHO_C" >&6
1270 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1274 test -z "$as_dir" && as_dir=.
1275 # Account for people who put trailing slashes in PATH elements.
1277 ./ | .// | /cC/* | \
1278 /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
1279 ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
1282 # OSF1 and SCO ODT 3.0 have their own names for install.
1283 # Don't use installbsd from OSF since it installs stuff as root
1285 for ac_prog in ginstall scoinst install; do
1286 for ac_exec_ext in '' $ac_executable_extensions; do
1287 if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
1288 if test $ac_prog = install &&
1289 grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1290 # AIX install. It has an incompatible calling convention.
1292 elif test $ac_prog = install &&
1293 grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1294 # program-specific install script used by HP pwplus--don't use.
1297 ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
1309 if test "${ac_cv_path_install+set}" = set; then
1310 INSTALL=$ac_cv_path_install
1312 # As a last resort, use the slow shell script. We don't cache a
1313 # path for INSTALL within a source directory, because that will
1314 # break other packages using the cache if that directory is
1315 # removed, or if the path is relative.
1316 INSTALL=$ac_install_sh
1319 echo "$as_me:$LINENO: result: $INSTALL" >&5
1320 echo "${ECHO_T}$INSTALL" >&6
1322 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1323 # It thinks the first close brace ends the variable substitution.
1324 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
1326 test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
1328 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
1330 # Make sure we can run config.sub.
1331 $ac_config_sub sun4 >/dev/null 2>&1 ||
1332 { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
1333 echo "$as_me: error: cannot run $ac_config_sub" >&2;}
1334 { (exit 1); exit 1; }; }
1336 echo "$as_me:$LINENO: checking build system type" >&5
1337 echo $ECHO_N "checking build system type... $ECHO_C" >&6
1338 if test "${ac_cv_build+set}" = set; then
1339 echo $ECHO_N "(cached) $ECHO_C" >&6
1341 ac_cv_build_alias=$build_alias
1342 test -z "$ac_cv_build_alias" &&
1343 ac_cv_build_alias=`$ac_config_guess`
1344 test -z "$ac_cv_build_alias" &&
1345 { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
1346 echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
1347 { (exit 1); exit 1; }; }
1348 ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
1349 { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
1350 echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
1351 { (exit 1); exit 1; }; }
1354 echo "$as_me:$LINENO: result: $ac_cv_build" >&5
1355 echo "${ECHO_T}$ac_cv_build" >&6
1357 build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1358 build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1359 build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1362 echo "$as_me:$LINENO: checking host system type" >&5
1363 echo $ECHO_N "checking host system type... $ECHO_C" >&6
1364 if test "${ac_cv_host+set}" = set; then
1365 echo $ECHO_N "(cached) $ECHO_C" >&6
1367 ac_cv_host_alias=$host_alias
1368 test -z "$ac_cv_host_alias" &&
1369 ac_cv_host_alias=$ac_cv_build_alias
1370 ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
1371 { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
1372 echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
1373 { (exit 1); exit 1; }; }
1376 echo "$as_me:$LINENO: result: $ac_cv_host" >&5
1377 echo "${ECHO_T}$ac_cv_host" >&6
1379 host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1380 host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1381 host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1384 echo "$as_me:$LINENO: checking target system type" >&5
1385 echo $ECHO_N "checking target system type... $ECHO_C" >&6
1386 if test "${ac_cv_target+set}" = set; then
1387 echo $ECHO_N "(cached) $ECHO_C" >&6
1389 ac_cv_target_alias=$target_alias
1390 test "x$ac_cv_target_alias" = "x" &&
1391 ac_cv_target_alias=$ac_cv_host_alias
1392 ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
1393 { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
1394 echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
1395 { (exit 1); exit 1; }; }
1398 echo "$as_me:$LINENO: result: $ac_cv_target" >&5
1399 echo "${ECHO_T}$ac_cv_target" >&6
1400 target=$ac_cv_target
1401 target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1402 target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1403 target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1406 # The aliases save the names the user supplied, while $host etc.
1407 # will get canonicalized.
1408 test -n "$target_alias" &&
1409 test "$program_prefix$program_suffix$program_transform_name" = \
1411 program_prefix=${target_alias}-
1413 if test -d ${srcdir}/spu ; then
1419 if test -d ${srcdir}/mep ; then
1420 configdirs="$configdirs mep"
1423 *mips*-*-pe* | *sh*-*-pe* | *arm*-*-wince | *arm*-wince-pe* )
1424 if test -d ${srcdir}/wince ; then
1425 configdirs="$configdirs wince"
1432 mostlyclean_subdirs=""
1434 distclean_subdirs=""
1435 maintainer_clean_subdirs=""
1437 for dir in $configdirs ; do
1438 all_subdirs="${all_subdirs} all-$dir"
1439 install_subdirs="${install_subdirs} install-$dir"
1440 mostlyclean_subdirs="${mostlyclean_subdirs} mostlyclean-$dir"
1441 clean_subdirs="${clean_subdirs} clean-$dir"
1442 distclean_subdirs="${distclean_subdirs} distclean-$dir"
1443 maintainer_clean_subdirs="${maintainer_clean_subdirs} maintainer-clean-$dir"
1454 [\\/]* | ?:[\\/]* ) # Absolute
1455 this_srcdir=${srcdir}
1458 this_srcdir="../${srcdir}"
1463 case "${cache_file}" in
1464 [\\/]* | ?:[\\/]* ) # Absolute
1465 this_cache_file=${cache_file}
1468 this_cache_file="../${cache_file}"
1471 subconfigure_args=${ac_configure_args}
1472 subconfigure_args="${subconfigure_args} --cache-file=${this_cache_file} --srcdir=${this_srcdir}"
1475 ac_config_files="$ac_config_files Makefile"
1477 cat >confcache <<\_ACEOF
1478 # This file is a shell script that caches the results of configure
1479 # tests run on this system so they can be shared between configure
1480 # scripts and configure runs, see configure's option --config-cache.
1481 # It is not useful on other systems. If it contains results you don't
1482 # want to keep, you may remove or edit it.
1484 # config.status only pays attention to the cache file if you give it
1485 # the --recheck option to rerun configure.
1487 # `ac_cv_env_foo' variables (set or unset) will be overridden when
1488 # loading this file, other *unset* `ac_cv_foo' will be assigned the
1493 # The following way of writing the cache mishandles newlines in values,
1494 # but we know of no workaround that is simple, portable, and efficient.
1495 # So, don't put newlines in cache variables' values.
1496 # Ultrix sh set writes to stderr and can't be redirected directly,
1497 # and sets the high bit in the cache file unless we assign to the vars.
1500 case `(ac_space=' '; set | grep ac_space) 2>&1` in
1502 # `set' does not quote correctly, so add quotes (double-quote
1503 # substitution turns \\\\ into \\, and sed turns \\ into \).
1506 s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
1509 # `set' quotes correctly as required by POSIX, so do not add quotes.
1511 "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1518 s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
1520 /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
1522 if diff $cache_file confcache >/dev/null 2>&1; then :; else
1523 if test -w $cache_file; then
1524 test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
1525 cat confcache >$cache_file
1527 echo "not updating unwritable cache $cache_file"
1532 test "x$prefix" = xNONE && prefix=$ac_default_prefix
1533 # Let make expand exec_prefix.
1534 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
1536 # VPATH may cause trouble with some makes, so we remove $(srcdir),
1537 # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
1538 # trailing colons and then remove the whole line if VPATH becomes empty
1539 # (actually we leave an empty line to preserve line numbers).
1540 if test "x$srcdir" = x.; then
1541 ac_vpsub='/^[ ]*VPATH[ ]*=/{
1542 s/:*\$(srcdir):*/:/;
1543 s/:*\${srcdir}:*/:/;
1545 s/^\([^=]*=[ ]*\):*/\1/;
1551 # Transform confdefs.h into DEFS.
1552 # Protect against shell expansion while executing Makefile rules.
1553 # Protect against Makefile macro expansion.
1555 # If the first sed substitution is executed (which looks for macros that
1556 # take arguments), then we branch to the quote section. Otherwise,
1557 # look for a macro that doesn't take arguments.
1558 cat >confdef2opt.sed <<\_ACEOF
1561 s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
1563 s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
1567 s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
1573 # We use echo to avoid assuming a particular line-breaking character.
1574 # The extra dot is to prevent the shell from consuming trailing
1575 # line-breaks from the sub-command output. A line-break within
1576 # single-quotes doesn't work because, if this script is created in a
1577 # platform that uses two characters for line-breaks (e.g., DOS), tr
1579 ac_LF_and_DOT=`echo; echo .`
1580 DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
1581 rm -f confdef2opt.sed
1586 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
1587 # 1. Remove the extension, and $U if already installed.
1588 ac_i=`echo "$ac_i" |
1589 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
1591 ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
1592 ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
1596 LTLIBOBJS=$ac_ltlibobjs
1600 : ${CONFIG_STATUS=./config.status}
1601 ac_clean_files_save=$ac_clean_files
1602 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
1603 { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
1604 echo "$as_me: creating $CONFIG_STATUS" >&6;}
1605 cat >$CONFIG_STATUS <<_ACEOF
1607 # Generated by $as_me.
1608 # Run this file to recreate the current configuration.
1609 # Compiler output produced by configure, useful for debugging
1610 # configure, is in config.log if it exists.
1615 SHELL=\${CONFIG_SHELL-$SHELL}
1618 cat >>$CONFIG_STATUS <<\_ACEOF
1619 ## --------------------- ##
1620 ## M4sh Initialization. ##
1621 ## --------------------- ##
1623 # Be Bourne compatible
1624 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1627 # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1628 # is contrary to our usage. Disable this feature.
1629 alias -g '${1+"$@"}'='"$@"'
1630 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
1633 DUALCASE=1; export DUALCASE # for MKS sh
1635 # Support unset when possible.
1636 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1643 # Work around bugs in pre-3.0 UWIN ksh.
1644 $as_unset ENV MAIL MAILPATH
1651 LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
1652 LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
1653 LC_TELEPHONE LC_TIME
1655 if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
1656 eval $as_var=C; export $as_var
1662 # Required to use basename.
1663 if expr a : '\(a\)' >/dev/null 2>&1; then
1669 if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
1670 as_basename=basename
1676 # Name of the executable.
1677 as_me=`$as_basename "$0" ||
1678 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
1679 X"$0" : 'X\(//\)$' \| \
1680 X"$0" : 'X\(/\)$' \| \
1681 . : '\(.\)' 2>/dev/null ||
1683 sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
1684 /^X\/\(\/\/\)$/{ s//\1/; q; }
1685 /^X\/\(\/\).*/{ s//\1/; q; }
1689 # PATH needs CR, and LINENO needs CR and PATH.
1690 # Avoid depending upon Character Ranges.
1691 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1692 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1693 as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1694 as_cr_digits='0123456789'
1695 as_cr_alnum=$as_cr_Letters$as_cr_digits
1697 # The user is always right.
1698 if test "${PATH_SEPARATOR+set}" != set; then
1699 echo "#! /bin/sh" >conf$$.sh
1700 echo "exit 0" >>conf$$.sh
1702 if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1713 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1714 test "x$as_lineno_1" != "x$as_lineno_2" &&
1715 test "x$as_lineno_3" = "x$as_lineno_2" || {
1716 # Find who we are. Look in the path if we contain no path at all
1719 *[\\/]* ) as_myself=$0 ;;
1720 *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1724 test -z "$as_dir" && as_dir=.
1725 test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1730 # We did not find ourselves, most probably we were run as `sh COMMAND'
1731 # in which case we are not to be found in the path.
1732 if test "x$as_myself" = x; then
1735 if test ! -f "$as_myself"; then
1736 { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
1737 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
1738 { (exit 1); exit 1; }; }
1740 case $CONFIG_SHELL in
1742 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1743 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
1746 test -z "$as_dir" && as_dir=.
1747 for as_base in sh bash ksh sh5; do
1750 if ("$as_dir/$as_base" -c '
1753 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1754 test "x$as_lineno_1" != "x$as_lineno_2" &&
1755 test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
1756 $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
1757 $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
1758 CONFIG_SHELL=$as_dir/$as_base
1760 exec "$CONFIG_SHELL" "$0" ${1+"$@"}
1768 # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
1769 # uniformly replaced by the line number. The first 'sed' inserts a
1770 # line-number line before each line; the second 'sed' does the real
1771 # work. The second script uses 'N' to pair each line-number line
1772 # with the numbered line, and appends trailing '-' during
1773 # substitution so that $LINENO is not a special case at line end.
1774 # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
1775 # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
1776 sed '=' <$as_myself |
1781 s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
1784 s,^['$as_cr_digits']*\n,,
1786 chmod +x $as_me.lineno ||
1787 { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
1788 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
1789 { (exit 1); exit 1; }; }
1791 # Don't try to exec as it changes $[0], causing all sort of problems
1792 # (the dirname of $[0] is not the place where we might find the
1793 # original and so on. Autoconf is especially sensible to this).
1795 # Exit status is that of the last command.
1800 case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
1801 *c*,-n*) ECHO_N= ECHO_C='
1803 *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
1804 *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
1807 if expr a : '\(a\)' >/dev/null 2>&1; then
1813 rm -f conf$$ conf$$.exe conf$$.file
1815 if ln -s conf$$.file conf$$ 2>/dev/null; then
1816 # We could just check for DJGPP; but this test a) works b) is more generic
1817 # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
1818 if test -f conf$$.exe; then
1819 # Don't use ln at all; we don't have any links
1824 elif ln conf$$.file conf$$ 2>/dev/null; then
1829 rm -f conf$$ conf$$.exe conf$$.file
1831 if mkdir -p . 2>/dev/null; then
1834 test -d ./-p && rmdir ./-p
1838 as_executable_p="test -f"
1840 # Sed expression to map a string onto a valid CPP name.
1841 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
1843 # Sed expression to map a string onto a valid variable name.
1844 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
1848 # We need space, tab and new line, in precisely that order.
1858 # Open the log real soon, to keep \$[0] and so on meaningful, and to
1859 # report actual input values of CONFIG_FILES etc. instead of their
1860 # values after options handling. Logging --version etc. is OK.
1864 sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
1865 ## Running $as_me. ##
1870 This file was extended by $as_me, which was
1871 generated by GNU Autoconf 2.59. Invocation command line was
1873 CONFIG_FILES = $CONFIG_FILES
1874 CONFIG_HEADERS = $CONFIG_HEADERS
1875 CONFIG_LINKS = $CONFIG_LINKS
1876 CONFIG_COMMANDS = $CONFIG_COMMANDS
1880 echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
1884 # Files that config.status was made for.
1885 if test -n "$ac_config_files"; then
1886 echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
1889 if test -n "$ac_config_headers"; then
1890 echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
1893 if test -n "$ac_config_links"; then
1894 echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
1897 if test -n "$ac_config_commands"; then
1898 echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
1901 cat >>$CONFIG_STATUS <<\_ACEOF
1904 \`$as_me' instantiates files from templates according to the
1905 current configuration.
1907 Usage: $0 [OPTIONS] [FILE]...
1909 -h, --help print this help, then exit
1910 -V, --version print version number, then exit
1911 -q, --quiet do not print progress messages
1912 -d, --debug don't remove temporary files
1913 --recheck update $as_me by reconfiguring in the same conditions
1914 --file=FILE[:TEMPLATE]
1915 instantiate the configuration file FILE
1917 Configuration files:
1920 Report bugs to <bug-autoconf@gnu.org>."
1923 cat >>$CONFIG_STATUS <<_ACEOF
1926 configured by $0, generated by GNU Autoconf 2.59,
1927 with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
1929 Copyright (C) 2003 Free Software Foundation, Inc.
1930 This config.status script is free software; the Free Software Foundation
1931 gives unlimited permission to copy, distribute and modify it."
1936 cat >>$CONFIG_STATUS <<\_ACEOF
1937 # If no file are specified by the user, then we need to provide default
1938 # value. By we need to know if files were specified by the user.
1944 ac_option=`expr "x$1" : 'x\([^=]*\)='`
1945 ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
1953 *) # This is not an option, so the user has probably given explicit
1956 ac_need_defaults=false;;
1960 # Handling of the options.
1962 cat >>$CONFIG_STATUS <<\_ACEOF
1963 -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
1965 --version | --vers* | -V )
1966 echo "$ac_cs_version"; exit 0 ;;
1968 # Conflict between --help and --header
1969 { { echo "$as_me:$LINENO: error: ambiguous option: $1
1970 Try \`$0 --help' for more information." >&5
1971 echo "$as_me: error: ambiguous option: $1
1972 Try \`$0 --help' for more information." >&2;}
1973 { (exit 1); exit 1; }; };;
1974 --help | --hel | -h )
1975 echo "$ac_cs_usage"; exit 0 ;;
1976 --debug | --d* | -d )
1978 --file | --fil | --fi | --f )
1980 CONFIG_FILES="$CONFIG_FILES $ac_optarg"
1981 ac_need_defaults=false;;
1982 --header | --heade | --head | --hea )
1984 CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
1985 ac_need_defaults=false;;
1986 -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1987 | -silent | --silent | --silen | --sile | --sil | --si | --s)
1991 -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
1992 Try \`$0 --help' for more information." >&5
1993 echo "$as_me: error: unrecognized option: $1
1994 Try \`$0 --help' for more information." >&2;}
1995 { (exit 1); exit 1; }; } ;;
1997 *) ac_config_targets="$ac_config_targets $1" ;;
2003 ac_configure_extra_args=
2005 if $ac_cs_silent; then
2007 ac_configure_extra_args="$ac_configure_extra_args --silent"
2011 cat >>$CONFIG_STATUS <<_ACEOF
2012 if \$ac_cs_recheck; then
2013 echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
2014 exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
2023 cat >>$CONFIG_STATUS <<\_ACEOF
2024 for ac_config_target in $ac_config_targets
2026 case "$ac_config_target" in
2027 # Handling of arguments.
2028 "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
2029 *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
2030 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
2031 { (exit 1); exit 1; }; };;
2035 # If the user did not use the arguments to specify the items to instantiate,
2036 # then the envvar interface is used. Set only those that are not.
2037 # We use the long form for the default assignment because of an extremely
2038 # bizarre bug on SunOS 4.1.3.
2039 if $ac_need_defaults; then
2040 test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
2043 # Have a temporary directory for convenience. Make it in the build tree
2044 # simply because there is no reason to put it here, and in addition,
2045 # creating and moving files from /tmp can sometimes cause problems.
2046 # Create a temporary directory, and hook for its removal unless debugging.
2049 trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
2050 trap '{ (exit 1); exit 1; }' 1 2 13 15
2053 # Create a (secure) tmp directory for tmp files.
2056 tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
2057 test -n "$tmp" && test -d "$tmp"
2060 tmp=./confstat$$-$RANDOM
2061 (umask 077 && mkdir $tmp)
2064 echo "$me: cannot create a temporary directory in ." >&2
2065 { (exit 1); exit 1; }
2070 cat >>$CONFIG_STATUS <<_ACEOF
2073 # CONFIG_FILES section.
2076 # No need to generate the scripts if there are no CONFIG_FILES.
2077 # This happens for instance when ./config.status config.h
2078 if test -n "\$CONFIG_FILES"; then
2079 # Protect against being on the right side of a sed subst in config.status.
2080 sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
2081 s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
2082 s,@SHELL@,$SHELL,;t t
2083 s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
2084 s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
2085 s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
2086 s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
2087 s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
2088 s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
2089 s,@exec_prefix@,$exec_prefix,;t t
2090 s,@prefix@,$prefix,;t t
2091 s,@program_transform_name@,$program_transform_name,;t t
2092 s,@bindir@,$bindir,;t t
2093 s,@sbindir@,$sbindir,;t t
2094 s,@libexecdir@,$libexecdir,;t t
2095 s,@datadir@,$datadir,;t t
2096 s,@sysconfdir@,$sysconfdir,;t t
2097 s,@sharedstatedir@,$sharedstatedir,;t t
2098 s,@localstatedir@,$localstatedir,;t t
2099 s,@libdir@,$libdir,;t t
2100 s,@includedir@,$includedir,;t t
2101 s,@oldincludedir@,$oldincludedir,;t t
2102 s,@infodir@,$infodir,;t t
2103 s,@mandir@,$mandir,;t t
2104 s,@build_alias@,$build_alias,;t t
2105 s,@host_alias@,$host_alias,;t t
2106 s,@target_alias@,$target_alias,;t t
2108 s,@ECHO_C@,$ECHO_C,;t t
2109 s,@ECHO_N@,$ECHO_N,;t t
2110 s,@ECHO_T@,$ECHO_T,;t t
2112 s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
2113 s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
2114 s,@INSTALL_DATA@,$INSTALL_DATA,;t t
2115 s,@build@,$build,;t t
2116 s,@build_cpu@,$build_cpu,;t t
2117 s,@build_vendor@,$build_vendor,;t t
2118 s,@build_os@,$build_os,;t t
2120 s,@host_cpu@,$host_cpu,;t t
2121 s,@host_vendor@,$host_vendor,;t t
2122 s,@host_os@,$host_os,;t t
2123 s,@target@,$target,;t t
2124 s,@target_cpu@,$target_cpu,;t t
2125 s,@target_vendor@,$target_vendor,;t t
2126 s,@target_os@,$target_os,;t t
2127 s,@all_subdirs@,$all_subdirs,;t t
2128 s,@install_subdirs@,$install_subdirs,;t t
2129 s,@mostlyclean_subdirs@,$mostlyclean_subdirs,;t t
2130 s,@clean_subdirs@,$clean_subdirs,;t t
2131 s,@distclean_subdirs@,$distclean_subdirs,;t t
2132 s,@maintainer_clean_subdirs@,$maintainer_clean_subdirs,;t t
2133 s,@this_srcdir@,$this_srcdir,;t t
2134 s,@subconfigure_args@,$subconfigure_args,;t t
2135 s,@LIBOBJS@,$LIBOBJS,;t t
2136 s,@LTLIBOBJS@,$LTLIBOBJS,;t t
2141 cat >>$CONFIG_STATUS <<\_ACEOF
2142 # Split the substitutions into bite-sized pieces for seds with
2143 # small command number limits, like on Digital OSF/1 and HP-UX.
2145 ac_sed_frag=1 # Number of current file.
2146 ac_beg=1 # First line for current file.
2147 ac_end=$ac_max_sed_lines # Line after last line for current file.
2150 while $ac_more_lines; do
2151 if test $ac_beg -gt 1; then
2152 sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
2154 sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
2156 if test ! -s $tmp/subs.frag; then
2159 # The purpose of the label and of the branching condition is to
2160 # speed up the sed processing (if there are no `@' at all, there
2161 # is no need to browse any of the substitutions).
2162 # These are the two extra sed commands mentioned above.
2164 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
2165 if test -z "$ac_sed_cmds"; then
2166 ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
2168 ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
2170 ac_sed_frag=`expr $ac_sed_frag + 1`
2172 ac_end=`expr $ac_end + $ac_max_sed_lines`
2175 if test -z "$ac_sed_cmds"; then
2178 fi # test -n "$CONFIG_FILES"
2181 cat >>$CONFIG_STATUS <<\_ACEOF
2182 for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
2183 # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
2185 - | *:- | *:-:* ) # input from stdin
2187 ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
2188 ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
2189 *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
2190 ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
2191 * ) ac_file_in=$ac_file.in ;;
2194 # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
2195 ac_dir=`(dirname "$ac_file") 2>/dev/null ||
2196 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
2197 X"$ac_file" : 'X\(//\)[^/]' \| \
2198 X"$ac_file" : 'X\(//\)$' \| \
2199 X"$ac_file" : 'X\(/\)' \| \
2200 . : '\(.\)' 2>/dev/null ||
2202 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
2203 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
2204 /^X\(\/\/\)$/{ s//\1/; q; }
2205 /^X\(\/\).*/{ s//\1/; q; }
2207 { if $as_mkdir_p; then
2212 while test ! -d "$as_dir"; do
2213 as_dirs="$as_dir $as_dirs"
2214 as_dir=`(dirname "$as_dir") 2>/dev/null ||
2215 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
2216 X"$as_dir" : 'X\(//\)[^/]' \| \
2217 X"$as_dir" : 'X\(//\)$' \| \
2218 X"$as_dir" : 'X\(/\)' \| \
2219 . : '\(.\)' 2>/dev/null ||
2221 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
2222 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
2223 /^X\(\/\/\)$/{ s//\1/; q; }
2224 /^X\(\/\).*/{ s//\1/; q; }
2227 test ! -n "$as_dirs" || mkdir $as_dirs
2228 fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
2229 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
2230 { (exit 1); exit 1; }; }; }
2234 if test "$ac_dir" != .; then
2235 ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
2236 # A "../" for each directory in $ac_dir_suffix.
2237 ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
2239 ac_dir_suffix= ac_top_builddir=
2243 .) # No --srcdir option. We are building in place.
2245 if test -z "$ac_top_builddir"; then
2248 ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
2250 [\\/]* | ?:[\\/]* ) # Absolute path.
2251 ac_srcdir=$srcdir$ac_dir_suffix;
2252 ac_top_srcdir=$srcdir ;;
2254 ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
2255 ac_top_srcdir=$ac_top_builddir$srcdir ;;
2258 # Do not use `cd foo && pwd` to compute absolute paths, because
2259 # the directories may not exist.
2261 .) ac_abs_builddir="$ac_dir";;
2264 .) ac_abs_builddir=`pwd`;;
2265 [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
2266 *) ac_abs_builddir=`pwd`/"$ac_dir";;
2269 case $ac_abs_builddir in
2270 .) ac_abs_top_builddir=${ac_top_builddir}.;;
2272 case ${ac_top_builddir}. in
2273 .) ac_abs_top_builddir=$ac_abs_builddir;;
2274 [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
2275 *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
2278 case $ac_abs_builddir in
2279 .) ac_abs_srcdir=$ac_srcdir;;
2282 .) ac_abs_srcdir=$ac_abs_builddir;;
2283 [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
2284 *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
2287 case $ac_abs_builddir in
2288 .) ac_abs_top_srcdir=$ac_top_srcdir;;
2290 case $ac_top_srcdir in
2291 .) ac_abs_top_srcdir=$ac_abs_builddir;;
2292 [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
2293 *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
2299 [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
2300 *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
2303 # Let's still pretend it is `configure' which instantiates (i.e., don't
2304 # use $as_me), people would be surprised to read:
2305 # /* config.h. Generated by config.status. */
2306 if test x"$ac_file" = x-; then
2309 configure_input="$ac_file. "
2311 configure_input=$configure_input"Generated from `echo $ac_file_in |
2312 sed 's,.*/,,'` by configure."
2314 # First look for the input files in the build tree, otherwise in the
2316 ac_file_inputs=`IFS=:
2317 for f in $ac_file_in; do
2319 -) echo $tmp/stdin ;;
2321 # Absolute (can't be DOS-style, as IFS=:)
2322 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
2323 echo "$as_me: error: cannot find input file: $f" >&2;}
2324 { (exit 1); exit 1; }; }
2327 if test -f "$f"; then
2330 elif test -f "$srcdir/$f"; then
2335 { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
2336 echo "$as_me: error: cannot find input file: $f" >&2;}
2337 { (exit 1); exit 1; }; }
2340 done` || { (exit 1); exit 1; }
2342 if test x"$ac_file" != x-; then
2343 { echo "$as_me:$LINENO: creating $ac_file" >&5
2344 echo "$as_me: creating $ac_file" >&6;}
2348 cat >>$CONFIG_STATUS <<_ACEOF
2352 cat >>$CONFIG_STATUS <<\_ACEOF
2354 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
2355 s,@configure_input@,$configure_input,;t t
2356 s,@srcdir@,$ac_srcdir,;t t
2357 s,@abs_srcdir@,$ac_abs_srcdir,;t t
2358 s,@top_srcdir@,$ac_top_srcdir,;t t
2359 s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
2360 s,@builddir@,$ac_builddir,;t t
2361 s,@abs_builddir@,$ac_abs_builddir,;t t
2362 s,@top_builddir@,$ac_top_builddir,;t t
2363 s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
2364 s,@INSTALL@,$ac_INSTALL,;t t
2365 " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
2367 if test x"$ac_file" != x-; then
2368 mv $tmp/out $ac_file
2377 cat >>$CONFIG_STATUS <<\_ACEOF
2379 { (exit 0); exit 0; }
2381 chmod +x $CONFIG_STATUS
2382 ac_clean_files=$ac_clean_files_save
2385 # configure is writing to config.log, and then calls config.status.
2386 # config.status does its own redirection, appending to config.log.
2387 # Unfortunately, on DOS this fails, as config.log is still kept open
2388 # by configure, so config.status won't be able to write to it; its
2389 # output is simply discarded. So we exec the FD to /dev/null,
2390 # effectively closing config.log, so it can be properly (re)opened and
2391 # appended to by config.status. When coming back to configure, we
2392 # need to make the FD available again.
2393 if test "$no_create" != yes; then
2395 ac_config_status_args=
2396 test "$silent" = yes &&
2397 ac_config_status_args="$ac_config_status_args --quiet"
2399 $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
2401 # Use ||, not &&, to avoid exiting from the if with $? = 1, which
2402 # would make configure fail if this is the last instruction.
2403 $ac_cs_success || { (exit 1); exit 1; }