/* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include "apq8096pro-v1.1.dtsi"
#include "msm8996-pm8994.dtsi"
#include "msm8996-agave-adp.dtsi"
#include "msm8996pro-auto.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. MSM 8996pro AUTO ADP";
	compatible = "qcom,apq8096-adp", "qcom,msm8996", "qcom,adp";
	qcom,msm-id = <316 0x10001>;
	qcom,board-id = <0x02010019 0>, <0x00010001 0>;
};

&spi_9 {
	status = "ok";
	can-controller@0 {
		compatible = "renesas,rh850";
		reg = <0>;
		interrupt-parent = <&tlmm>;
		interrupts = <122 0>;
		spi-max-frequency = <5000000>;
	};
};

&soc {
	qcom,msm-ssc-sensors {
		status = "disabled";
	};

	qcom,msm-thermal {
		qcom,hotplug-temp = <115>;
		qcom,hotplug-temp-hysteresis = <25>;
		qcom,therm-reset-temp = <119>;
	};

	qcom,adv7481@70 {
		qcom,cam-vreg-min-voltage = <1300000 0 1800000>;
		qcom,cam-vreg-max-voltage = <1300000 0 1800000>;
	};
};

&pil_modem {
	pinctrl-names = "default";
	pinctrl-0 = <&modem_mux>;
};

&slim_msm {
	status = "disabled";
};

&pm8994_mpps {
	mpp@a500 { /* MPP 6 */
		qcom,mode = <1>;		/* Digital output */
		qcom,output-type = <0>;		/* CMOS logic */
		qcom,vin-sel = <2>;		/* S4 1.8V */
		qcom,src-sel = <0>;		/* Constant */
		qcom,master-en = <1>;		/* Enable GPIO */
		status = "okay";
	};
};

&sdhc_2 {
	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on_sbc>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off
			&sdc2_cd_on_sbc>;
};

&i2c_7 {
	silabs4705@11 { /* SiLabs FM chip, slave id 0x11*/
		status = "disabled";
	};
};