/* * Copyright (C) 2016 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.gnss@1.0; /** Represents a GNSS navigation message (or a fragment of it). */ interface IGnssNavigationMessageCallback { /** * Enumeration of available values to indicate the GNSS Navigation message * types. * * For convenience, first byte is the GnssConstellationType on which that signal * is typically transmitted. */ @export(name="", value_prefix="GNSS_NAVIGATION_MESSAGE_TYPE_") enum GnssNavigationMessageType : int16_t { UNKNOWN = 0, /** GPS L1 C/A message contained in the structure. */ GPS_L1CA = 0x0101, /** GPS L2-CNAV message contained in the structure. */ GPS_L2CNAV = 0x0102, /** GPS L5-CNAV message contained in the structure. */ GPS_L5CNAV = 0x0103, /** GPS CNAV-2 message contained in the structure. */ GPS_CNAV2 = 0x0104, /** Glonass L1 CA message contained in the structure. */ GLO_L1CA = 0x0301, /** Beidou D1 message contained in the structure. */ BDS_D1 = 0x0501, /** Beidou D2 message contained in the structure. */ BDS_D2 = 0x0502, /** Galileo I/NAV message contained in the structure. */ GAL_I = 0x0601, /** Galileo F/NAV message contained in the structure. */ GAL_F = 0x0602 }; /** * Status of Navigation Message * When a message is received properly without any parity error in its * navigation words, the status must be set to PARITY_PASSED. * If a message is received with words that failed a parity check, but the GNSS * receiver has corrected those words, the status must be set to PARITY_REBUILT. * Do not send any navigation message that contains words with parity errors * that cannot be corrected. */ @export(name="navigation_message_status", value_prefix="NAV_MESSAGE_STATUS_") enum NavigationMessageStatus : uint16_t { PARITY_PASSED = (1 << 0), PARITY_REBUILT = (1 << 1), UNKNOWN = 0 }; struct GnssNavigationMessage { /** * Satellite vehicle ID number, as defined in GnssSvInfo::svid * This is a mandatory value. */ int16_t svid; /** * The type of message contained in the structure. * This is a mandatory value. */ GnssNavigationMessageType type; /** * The status of the received navigation message. * No need to send any navigation message that contains words with parity * errors that cannot be corrected. */ bitfield status; /** * Message identifier. It provides an index so the complete Navigation * Message can be assembled. * * - For GNSS L1 C/A subframe 4 and 5, this value corresponds to the 'frame * id' of the navigation message, in the range of 1-25 (Subframe 1, 2, 3 * does not contain a 'frame id' and this value can be set to -1.) * * - For Glonass L1 C/A, this refers to the frame ID, in the range of 1-5. * * - For BeiDou D1, this refers to the frame number in the range of 1-24 * * - For Beidou D2, this refers to the frame number, in the range of 1-120 * * - For Galileo F/NAV nominal frame structure, this refers to the subframe * number, in the range of 1-12 * * - For Galileo I/NAV nominal frame structure, this refers to the subframe * number in the range of 1-24 */ int16_t messageId; /** * Sub-message identifier. If required by the message 'type', this value * contains a sub-index within the current message (or frame) that is being * transmitted. * * - For GNSS L1 C/A, BeiDou D1 & BeiDou D2, the submessage id corresponds to * the subframe number of the navigation message, in the range of 1-5. * * - For Glonass L1 C/A, this refers to the String number, in the range from * 1-15 * * - For Galileo F/NAV, this refers to the page type in the range 1-6 * * - For Galileo I/NAV, this refers to the word type in the range 1-10+ */ int16_t submessageId; /** * The data of the reported GNSS message. The bytes (or words) are specified * using big endian format (MSB first). * * - For GNSS L1 C/A, Beidou D1 & Beidou D2, each subframe contains 10 30-bit * words. Each word (30 bits) must fit into the last 30 bits in a * 4-byte word (skip B31 and B32), with MSB first, for a total of 40 * bytes, covering a time period of 6, 6, and 0.6 seconds, respectively. * The standard followed is 1995 SPS Signal specification. * * - For Glonass L1 C/A, each string contains 85 data bits, including the * checksum. These bits must fit into 11 bytes, with MSB first (skip * B86-B88), covering a time period of 2 seconds. * The standard followed is Glonass Interface Control Document Edition 5.1. * * - For Galileo F/NAV, each word consists of 238-bit (sync & tail symbols * excluded). Each word must fit into 30-bytes, with MSB first (skip * B239, B240), covering a time period of 10 seconds. The standard * followed is European GNSS(Galileo) Signal in Space Interface * Control Document Issue 1.2. * * - For Galileo I/NAV, each page contains 2 page parts, even and odd, with * a total of 2x114 = 228 bits, (sync & tail excluded) that must fit * into 29 bytes, with MSB first (skip B229-B232). The standard followed * is same as above. * * The data reported here must be the raw data as demodulated by the GNSS * receiver, not data received from an external source (i.e. not from a server * download.) */ vec data; }; /** * The callback to report an available fragment of a GNSS navigation messages * from the HAL. * * @param message - The GNSS navigation submessage/subframe representation. */ gnssNavigationMessageCb(GnssNavigationMessage message); };