2009-07-10  Arnim Laeuger  <arniml>

  * src/tap/cable/ft2232.c: disable "Set Data bits LowByte" for
    ft2232_transfer, seems to be superfluous and decreases cable performance
    (Jie Zhang)

2009-06-15  Arnim Laeuger  <arniml>

  * src/bus/mpc824x.c: experimental support for x16 mode, including help 

2009-06-13  Rutger Hofman <rfhh>

  * include/urjtag/*.h: change all struct/enum definitions from
    typedef struct urj_bla urj_bla_t into typedef struct URJ_BLA urj_bla_t
    because swig otherwise generates name collisions
  * Makefile.am, urjtag.i: add the dumbest possible swig target that generates
    swig for everything referenced include/urjtag/urjtag.h. This might even
    turn out to be useful once the API has been cleaned up.

2009-06-11  Arnim Laeuger  <arniml>

  * src/bus/bf533_stamp.c: [ 2804509 ] bf533_stamp bus driver enchancement
    (MURANAKA Masaki)

2009-06-05  Rutger Hofman <rfhh>

  * src/tap/cable.c: sanity check on driver device type at connect time
  * have only /* style comments in the public includes, since that allows
    a client app to compile with -ansi

2009-06-08  Arnim Laeuger  <arniml>

  * src/tap/cable.c, src/tap/cable/minimal.c, src/tap/Makefile.am:
    [ 2798198 ] The Minimal Parallel Port JTAG Cable (Yen Rui)

  * data/MANUFACTURERS: commented manufacturer ARM
    [ 2778313 ] Failed to detect ARM cores.

  * MAINTAINERS: new

2009-06-05  Rutger Hofman <rfhh>

  * src/tap/cable/ts7800.c, src/tap/cable/vision_ep9307.c: make them compile
    again

2009-06-04  Arnim Laeuger  <arniml>

  * src/bsdl/bsdl_flex.l: force Base = DECIMAL for BOUNDARY_LENGTH attribute

2009-06-04  Rutger Hofman <rfhh>

  * src/tap/cable/*.c, src/tap/parport/*.c, src/tap/usbconn/*.c: return/handle
    URJ_STATUS_OK/FAIL more correctly

2009-06-02  Arnim Laeuger  <arniml>

  * src/cmd/cmd_initbus.c: use separate index variable for driver selection

2009-06-01  Arnim Laeuger  <arniml>

  * src/bsdl/bsdl_sem.c, THANKS: Fix bsdl bit order and safe bit
    (Jean-Christian de Rivaz)

2009-06-01  Mike Frysinger  <vapier@gentoo.org>

  * src/bsdl/bsdl_sem.c: add missing "length" in display (Jean-Christian de
    Rivaz)

2009-05-28  Rutger Hofman <rfhh>

  * include/urjtag/cmd.h, src/cmd/cmd.h: move defitions from public to private
    include file because these parameter utilities are no longer used outside
    cmd

  * include/urjtag/usbconn/*.h: move to src/tap/usbconn/ because these are
    actually internal include files

2009-05-28  Rutger Hofman <rfhh>

  * src/global/urjtag.c, src/global/Makefile.am: rename urjtag.c to
    src/global/log-error.c

  * src/global/params.c, src/global/Makefile.am, include/urjtag/params.h,
    include/urjtag/Makefile.am: data structure for key/value pairs

  * src/bus/*, include/urjtag/bus_driver.h, include/urjtag/bus.h,
    src/cmd/cmd_initbus.c: have an API call initbus() that uses key/value
    pairs to pass in options

  * src/tap/cable.c, src/tap/parport.c, src/tap/usbconn.c, src/tap/cable/*,
    src/tap/parport/*, src/tap/usbconn/*, include/urjtag/cable.h: have API
    calls urj_tap_cable_parport_connect(), urj_tap_cable_usb_connect(),
    urj_tap_cable_other_connect(); have a tagged union in the cable driver
    that offers driver-specific connect() calls.

  * src/cmd/cmd_cable.c, src/tap/cable/wiggler.c: the 4th wiggler argument,
    the pin bitmap, is now a key/value parameter with key 'bitmap='.

2009-05-28  Mike Frysinger  <vapier@gentoo.org>

  * configure.ac: improve svn rev look up by ignoring errors, unifying
    duplicated code, and support git-svn tree

  * src/tap/detect.c: if the part could not be found because the data file
    could not be opened, then log an obvious error message

  * src/cmd/cmd_debug.c: display current log level if no arguments specified

2009-05-24  Rutger Hofman <rfhh>

  * src/bus/avr32.c: fix uninitialized warning (Florian Fainelli)

2009-05-26  Mike Frysinger  <vapier@gentoo.org>

  * src/tap/cable/xpc.c: fix crash when USB device is busy (Florian Fainelli)

2009-05-26  Arnim Laeuger  <arniml>

  * src/bus/bf561_ezkit.c, src/bus/sharc21065l.c, src/bus/bf537_stamp.c,
    src/bus/bf533_ezkit.c, src/bus/bf533_stamp.c, src/bus/ppc405ep.c,
    src/bus/bf548_ezkit.c: keywords

  * src/bus/bf533_stamp.c: manual fix of [ 2793104 ]

2009-05-25  Arnim Laeuger  <arniml>

  * src/bus/bf533_stamp.c: [ 2793104 ] hidden bug? in bf533-stamp.c
    (MURANAKA Masaki)

2009-05-24  Rutger Hofman <rfhh>

  * src/bus/readmem.c, src/bus/writemem.c, include/urjtag/bus.h,
    src/cmd/cmd_readmem.c, src/cmd/cmd_writemem.c: readmem() and
    writemem() now return an error condition. Patch up error handling
    in readmem() and writemem().

2009-05-23  Arnim Laeuger  <arniml>

  * src/bsdl/bsdl_msg.h, src/bsdl/vhdl_flex.l, src/bsdl/vhdl_bison.y,
    src/bsdl/bsdl_flex.l, src/bsdl/bsdl_bison.y:
    change some errors to fatals

  * include/urjtag/error.h, src/global/urjtag.c,
    src/apps/bsdl2jtag/bsdl2jtag.c,
    src/bsdl/bsdl_msg.h, src/bsdl/bsdl.c, src/bsdl/bsdl_sem.c,
    src/bsdl/vhdl_flex.l, src/bsdl/vhdl_bison.y,
    src/bsdl/bsdl_flex.l, src/bsdl/bsdl_bison.y: port BSDL message system to
    urj_log/urj_err_set functionality

2009-05-23  Rutger Hofman <rfhh>

  * configure.ac, Makefile.am: add an option (--disable-apps) to build only
    the library, not the application main programs

2009-05-23  Arnim Laeuger  <arniml>

  * src/bsdl2jtag, configure.ac, Makefile.am, src/Makefile.am,
    src/apps/bsdl2jtag/Makefile.am, src/apps/bsdl2jtag/bsdl2jtag.c:
    replace wrapper shell script with application that links to liburjtag

2009-05-22  Arnim Laeuger  <arniml>

  * src/bsdl/bsdl_sem.c: replace remaining printf invocations with urj_log

  * src/flash/flash.c: verify speed-up: use URJ_BUS_READ_START, _NEXT,
    and _END instead of monolithic URJ_BUS_READ

  * src/flash/jedec.c: rework autoselect probing, better support of
    x8/x16 capable flash chips

  * src/bsdl/bsdl.c, src/bsdl/bsdl_bison.y, src/bsdl/bsdl_sem.c,
    src/bsdl/bsdl_flex.l, src/bsdl/bsdl_types.h: use URJ_STATUS_ return
    codes except on toplevel interface, this needs to be revisited

2009-05-21  Mike Frysinger  <vapier@gentoo.org>

  * data/xilinx/PARTS: added xc3s1200e_fg320 and xc2vp30-ffg896 (Florian
    Fainelli)

  * configure.ac: enable -Werror by default only when building out of an scm,
    and add an explicit --enable-werror option to control it

  * src/tap/detect.c: if the idcode failed to parse, don't print it out like it
    actually worked but only returned zero's as this is confusing -- be clear
    in that we didn't even attempt to read the idcode

  * src/cmd/cmd_idcode.c: update usage to reflect reality

  * include/urjtag/tap_register.h, src/tap/detect.c, src/tap/register.c:
    convert the local bits_to_uint64() to a proper urj_tap_register_get_value()
    so everyone can use it

  * src/tap/idcode.c: decode the bit stream into hex values so people don't
    have to do this manually

2009-05-19  Arnim Laeuger  <arniml>

  * data/Makefile.am, data/broadcom/bcm6348/bcm6348,
    data/broadcom/bcm6348/STEPPINGS, data/broadcom/bcm6358/bcm6358,
    data/broadcom/PARTS: added bcm6348 (Julien Aube)

2009-05-19  Rutger Hofman <rfhh>

  * include/urjtag/error.h: make urj_log into a macro. Principal reason: if
    urj_log won't print, it also won't evaluate the arguments so there is no
    performance penalty in having gazillion disabled low-level prints
  * src/bus/*, include/urjtag/bus_driver.h: refactor src/bus to use urj_log
    i.s.o. printf, set urj_error wherever appropriate, return FAIL/OK state
    where appropriate. read_start() now returns status.

2009-05-18  Rutger Hofman <rfhh>

  * src/cmd/cmd_debug.c, include/urjtag/jtag.h, src/global/urjtag.c: change
    to set log level; remove unused global variable urj_debug_mode

2009-05-18  Rutger Hofman <rfhh>

  Make it compile for my eCos BlackFin checkout.
  - numerous casts because "%zd" ever requires a size_t, even for a manifest
    constant; and because a uint32_t should be cast to a long unsigned to be
    printed with "%lu" (long unsigned is at least 32-bit)
  * include/urjtag/urjtag.h, include/urjtag/urjtag.h.in: rename to only
    export .h files for modules actually configured: USB, SVF, BSDL are
    only conditionally exported

2009-05-18  Arnim Laeuger  <arniml>

  * src/flash/amd.c: added Winbond W19B320AT/B flash chip

2009-05-16  Arnim Laeuger  <arniml>

  * src/bus/ixp435.c, src/bus/buses.c, src/bus/buses.h,
    src/bus/Makefile.am, configure.ac, THANKS:
    [ 2770421 ] Patch: Support for IXP43x (Florian Boor)
    without jtag description files

  * include/urjtag/parport.h, src/tap/parport/ppdev.c, src/tap/parport/ppi.c,
    src/tap/parport/direct.c, src/tap/parport.c: [ 2782584 ] PPWDATA and PPWCONTROL
    ioclts take unsigned char not uint8_t (Yen Rui)

2009-05-14  Arnim Laeuger  <arniml>

  * src/svf/svf_bison.y, src/svf/svf.c, src/cmd/cmd_svf.c,
    include/urjtag/svf.h:
    implement pass/fail return values with URJ_STATUS_*

2009-05-14  Rutger Hofman <rfhh>

  * src/tap/cable/*.c: convert return values, error handling, printfs
  * src/**: globally remove \n or !\n from error detail msgs; sanitize
    error prints a tiny bit
  * include/urjtag/sysdep.h, include/urjtag/Makefile.am: sysdep.h should most
    certainly not be in the directory of exported header files. Move it back
    to the root dir in expectation of an include dir that is private to the
    src tree

2009-05-12  Rutger Hofman <rfhh>

  * src/cmd/*.c, many more files: have the commands in src/cmd/ return
    URJ_STATUS_OK on success, URJ_STATUS_FAIL on error, URJ_STATUS_MUST_QUIT
    at a 'quit' command. The command implementations themselves do not print
    on error; that is left to the caller, i.e. the application or a file
    parser.
    Library commands that produce output (print routines) are equipped with
    a urj_log_level_t parameter to control their verbosity.
  * include/urjtag/error.h, many more files: introduce error values
    URJ_ERROR_FTD, URJ_ERROR_USB. Handle URJ_ERROR_IO specially through macro
    urj_error_IO_set that handles errno/strerror().

2009-05-11  Arnim Laeuger  <arniml>

  * src/bus/ejtag_dma.c (ejtag_dma_bus_init): invert abort condition for break
    timeout

2009-05-10  Arnim Laeuger  <arniml>

  * doc/UrJTAG.txt: hint for non-standard flash commands

2009-05-09  Rutger Hofman <rfhh>

  * configure.ac, **/Makefile.am: Add automake magic to have -Werror except
    in the flex-generated files. See the automake FAQ:
    http://www.gnu.org/software/automake/manual/html_node/Flag-Variables-Ordering.html#Flag-Variables-Ordering
    Only setting -Wno-error=unused-function doesn't work for some gcc-s.

2009-05-09  Arnim Laeuger  <arniml>

  * src/bsdl/Makefile.am, src/svf/Makefile.am: avoid -Werror to bail out because
    of unused input() functions in flex-generated files

  * include/urjtag/svf.h, src/cmd/cmd_svf.c, src/svf/svf.c,
    src/svf/svf_bison.y, src/svf/svf.h, src/svf/svf_flex.l:
    replace print_progress with DETAIL log level

2009-05-07  Rutger Hofman <rfhh>

  * src/flash/, src/svf/, src/tap/*.c, src/tap/parallel/, src/tap/usbconn:
    replace calls to printf() with calls to urj_log() and urj_error_set()

2009-05-07  Arnim Laeuger  <arniml>

  * src/tap/cable/wiggler2.c: [ 2782581 ] TRST, TMS and TDI incorrectly marked
    in wiggler2 cable

  * po/POTFILES.in: src/jim/tap.c renamed to jim_tap.c, removed getdelim.c
    and getline.c 

  * src/cmd/cmd_test.c: [ 2776954 ] typo? on 'help test'

2009-05-06  Arnim Laeuger  <arniml>

  * src/flash/amd.c: fix typo in S29GLxxxN, twice

2009-05-05  Rutger Hofman <rfhh>

  * src/svf/svf.c, src/svf/svf_bison.y, src/svf/svf_flex.y: replace calls to
    printf() with calls to urj_log() and urj_error_set()

  * src/lib/getline.c, src/lib/getdelim.c: remove because unused

  * src/global/parse.c: replace calls to printf() with calls to urj_log() and
    urj_error_set()

  * include/urjtag/jim.h, include/urjtag/jim/some_cpu.h, src/jim/tap.c,
    src/jim/jim_tap.c, src/jim/some_cpu.c, src/jim/intel_28f800b3.c: replace
    calls to printf() with calls to urj_log() and urj_error_set()

  * include/urjtag/part.h, src/cmd/cmd_bus.c, src/cmd/cmd_detect.c,
    src/cmd/cmd_signal.c, src/bsdl/bsdl_bison.y, src/part/instruction.c,
    src/part/bsbit.c, src/part/part.c, src/part/signal.c: start replacing
    calls to printf() with calls to urj_log(), for starters with src/part.
    Sometimes that means fixing a function to return an error status where
    it previously printed and returned void

  * include/urjtag/data_register.h, include/urjtag/error.h,
    include/urjtag/log.h, src/global/*.c, src/cmd/cmd_register.c,
    src/cmd/cmd_instruction.c, src/bsdl/bsdl_sem.c, src/tap/detect.c,
    src/part/data_register.c, src/svf/svf_flex.l, src/svf/svf.c,
    src/flash/detectflash.c: transform a number of urj_cmd_run() calls into
    API calls

2009-05-04  Rutger Hofman <rfhh>

  * src/cmd/cmd_bus.c, src/bus/buses.c, include/urjtag/bus.h: transform the
    bus cmd implementation into an API call
  * src/cmd/cmd_detect.c, src/tap/detect.c, include/urjtag/tap.h: transform the
    detect cmd implementation into an API call

2009-05-02  Rutger Hofman <rfhh>

  Refactor the autoconf stuff a bit so make install actually creates
  include/urjtag/*.h

2009-05-01  Rutger Hofman <rfhh>

  Global variables for liburjtag should not reside in the shell app
  * src/jtag.c: split into src/global/urjtag.c and src/apps/jtag/jtag.c

2009-05-01  Rutger Hofman <rfhh>

  Move all include/* to include/urjtag/* to lower collision chance on #include.
  Start lifting commands from cmd/ into the library modules. Begun work on:
    * src/cmd/cmd_bit.c
    * src/cmd/cmd_instruction.c
    * src/cmd/cmd_signal.c

2009-04-24  Mike Frysinger  <vapier@gentoo.org>

  * data/analog/bf518/bf518: Update with public BSDL file.

  * data/analog/bf527/bf527, data/analog/bf533/bf533, data/analog/bf537/bf537,
    data/analog/bf538/bf538, data/analog/bf548/bf548, data/analog/bf561/bf561:
    Add more register/instruction JTAG encodings.

2009-04-23  Rutger Hofman <rfhh>

  Use the changes by Przemyslaw Iskra, published as
  $ svn co http://labserver.uv.es/svn_FPGA/trunk/source/urjtag urjtag-lib
  to use libtool from now on. He based on r1427.
  * configure.ac, **/Makefile.am: use libtool to create one shared liburjtag.la

2009-04-23  Rutger Hofman <rfhh>

  Expand tabs also in #defines -- indent skips them.
  Run indent again. Since many identifiers have changed, line wraps have to
  be redone.
  Public typedefs of enums follow the same naming scheme as structs:
  typedef enum urj_bla { ... } urj_bla_t;
  * affects the complete code base.

2009-04-23  Rutger Hofman <rfhh>

  Mechanically replace all global function/variable names w/ a prefix
  urj_(<module>_)*. Investigated with
      ctags -R -x --c-kinds=f --file-scope=no  | grep function
      ctags -R -x --c-kinds=v --file-scope=no  | grep variable
      ctags -R -x --c-kinds=t --file-scope=no | grep typedef
      ctags -R -x --c-kinds=e --file-scope=no | grep enum
  then (sed-wise or manually) repair what doesn't fit automatically:
    - imported files from src/lib
    - duplicate modules like urj_cmd_cmd_detect that becomes urj_cmd_detect
    - stuff where prefix escalation has a mismatch w/ existing name escalation
      because of different order:
        usbconn_cable_usbblaster_ftdi
      becomes
        urj_tap_cable_usbconn_usbblaster_ftdi
      not
        urj_tap_cable_usbconn_cable_usbblaster_ftdi
    - typedefs only (or mostly) under include. Typedefs under src/ are left
      unmodified, since they will be invisible outside liburjtag.
  and then some.
  The identifier names in .y and .l files have been changed by hand.
  Some type names happen to be identical to variable/parameter names. These
  were changed too by the automatic replace. Undo a number of them by hand.
  * affects the complete code base.

2009-04-22  Rutger Hofman <rfhh>

  A very few typedef'ed types do NOT have an _t prefix. Orthogonize this by
  adding _t to typedefs: instruction, data_register, tap_register.
  * include/part.h, include/data_register.h, include/instruction.h,
  include/register.h, include/tap.h, src/cmd/instruction.c,
  src/cmd/register.c, src/cmd/dr.c, src/cmd/bit.c, src/cmd/scan.c,
  src/cmd/print.c, src/tap/discovery.c, src/tap/detect.c, src/tap/register.c,
  src/tap/tap.c, src/tap/idcode.c, src/part/instruction.c, src/part/part.c,
  src/part/data_register.c, src/bus/fjmem.c, src/bus/ejtag_dma.c,
  src/bus/avr32.c, src/bus/ejtag.c, src/svf/svf.c, src/svf/svf.h

2009-04-22  Rutger Hofman <rfhh>

  Check suspicious-looking public symbols whether they shouldn't be in fact
  static:
  * src/jim/tap.c: make some variables static
  * src/jim/intel_28f800b3.c: make some variables static
  * src/jim/some_cpu.c
  * src/tap/parport/direct.c
  * src/bus/ejtag_dma.c
  * src/bus/mpc824x.c
  * src/bus/bcm1250.c
  * src/bus/slsup3.c
  * src/flash/amd_flash.c

2009-04-21  Rutger Hofman <rfhh>

  Run indent over the code base: all '*.[ch]' files except evidently imported
  ones, like the libiberty imports in lib.
  * xargs indent -npro -nut -bli0 -i4 {-T typedef}* < indent-files
    where indent-files is `find . -name '*.[ch]' -print` except:
  	src/lib/ansidecl.h
	src/lib/filenames.h
	src/lib/lbasename.c
	src/lib/libiberty.h
	src/lib/lrealpath.c
	src/lib/make-relative-prefix.c
	src/lib/safe-ctype.c
	src/lib/safe-ctype.h
	include/gettext.h
  * README: add a warning as to the status of the urjtag/ branch AKA the
    Librarification branch

2009-04-17  Kolja Waschk <kawk>

  * Makefile.am: Distribute UrJTAG.nsi in source tarball next time

2009-04-17  Arnim Laeuger  <arniml>

  Version 0.10 released.

2009-04-17  Arnim Laeuger  <arniml>

  * configure.ac, NEWS: set release version 0.10

  * src/jtag.c: Update copyright year at both instances

2009-04-17  Kolja Waschk <kawk>

  * configure.ac: Last minute fix for USBCFLAGS for libusb
  * doc/UrJTAG.txt: Info about installing precompiled version on Win
  * src/flash/jedec.c: Add license info
  * UrJTAG.nsi: Create links to EXE and UrJTAG.txt in Start Menu

2009-04-16  Arnim Laeuger  <arniml>

  * THANKS: added contributors

2009-04-16  Kolja Waschk <kawk>

  * include/xpcu.h, src/flash/jedec_exp.c: Add license info
  * doc/UrJTAG.txt: Info about source for 64bit/Vista inpout32.dll
  * UrJTAG.nsi: Include inpout32.dll (needs some manual work)

2009-04-16  Arnim  <arniml>

  * doc/UrJTAG.txt: Documentation fixes (Uwe Hermann)

2009-04-13  Arnim  <arniml>

  * configure.ac: follow version info in NEWS

2009-04-12  Arnim  <arniml>

  * src/tap/cable/ft2232.c: flyswatter description update

  * NEWS: prepare for 0.10 release, still requires version update

2009-04-10  Arnim Laeuger  <arniml>

  * src/flash/flash.c (flasherase): fix missing base address for block_no calculation,
    re-use find_block() from flashmem() to align block_no calculation

2009-04-08  Arnim Laeuger  <arniml>

  * couple of files: enable Id keyword substitution

  * po/fr.po, po/rw.po, po/sk.po: update to latest status

  * src/bus/bscoach.c: use english text per default

  * po/POTFILES.in: update to current file list

  * data/Makefile.am: added missing files for install

  * doc/UrJTAG.txt: describe bus command

  * doc/bsdl2jtag.1, doc/jtag.1, THANKS: Various manpage updates (Uwe Hermann)

2009-04-06  Arnim Laeuger  <arniml>

  * src/Makefile.am, po/POTFILES.in: fix two build issues (Uwe Hermann)

  * src/tap/usbconn/libftdi.c: Better errors from ftdi (Jon Smirl)

  * src/flash/jedec.c: Author added.

2009-04-05  Arnim Laeuger  <arniml>

  * configure.ac: turn feature options that are enabled by default into
    --disable-*

  * src/tap/cable/ft2232.c: check target status for UsbScarab2 (Tomek Cedro)

2009-04-04  Arnim Laeuger  <arniml>

  * src/tap/cable/ft2232.c, src/tap/cable.c, src/tap/cable/generic_usbconn.c,
    THANKS, doc/UrJTAG.txt: usbscarab2 cable driver added (Tomek Cedro)

2009-03-30  Arnim Laeuger  <arniml>

  * doc/UrJTAG.txt: multi-byte description

  * configure.ac: better description for flash-multi-byte

2009-03-29  Arnim Laeuger <arniml>

  * UrJTAG.txt: Update supported pod and device lists

2009-03-28  Arnim Laeuger  <arniml>

  * src/tap/chain.c (chain_set_pod_signal) : keep old value of trst in
    case trst isn't modified by mask/val

  * src/tap/chain.c: [ 2610857 ] chain_set_pod_signal() looks funky

  * UrJTAG.txt: typo

2009-03-28  Arnim Laeuger  <arniml>

  * src/bsdl2jtag, src/Makefile.am, doc/UrJTAG.txt: implement bsdl2jtag
    as a wrapper script that calls jtag shell with 'bsdl dump ...'

  * src/Makefile.am, src/bsdl2jtag.c: removed bsdl2jtag

2009-03-27  Arnim Laeuger  <arniml>

  * src/jtag.c: more than one optional file can be specified

  * src/flash/jedec.c: fix memory corruption from jedec code (Jon Smirl)

2009-03-26  Arnim Laeuger  <arniml>

  * src/cmd/initbus.c: Notify which bus is active when a new bus is initialized
    (Jon Smirl)

  * src/bus/mpc5200.c, THANKS: Support the MUX parameter on the mpc5200
    local bus for hardware (Jon Smirl)

2009-03-23  Arnim Laeuger  <arniml>

  * src/cmd/pod.c: show signal names for TRST and RESET

2009-03-18  Arnim Laeuger  <arniml>

  * acinclude.m4: add libtinfo, fix for
    [ 2691154 ] Configure fails to detect libtinfo

  * src/flash/intel.c, src/flash/amd.c: activate multi byte write mode
    for > 1, not > 0
    [ 2690857 ] Can't write flashes

2009-03-12  Arnim Laeuger  <arniml>

  * data/atheros/ar2312/ar2312: AR2313 flash access patch
    (snowweihua)

2009-03-08  Arnim Laeuger  <arniml>

  * src/svf/svf.c, src/svf/svf_bison.y, src/svf/svf.h:
    [ 2666261 ] Add pass/fail report to SVF player

  * src/svf/svf.c: avoid double free for SIR/SDR parameter strings in case
    of a consistency check error

  * src/bsdl/bsdl_sem.c: avoid leading space when printing commands

2009-03-07  Arnim Laeuger  <arniml>

  * data/ti/tnetv1060/tnetv1060, data/ti/tnetv1061/tnetv1061:
    init EJTAG bus automatically

2009-03-05  Arnim Laeuger  <arniml>

  * src/tap/print_queue.c, src/bus/bscoach.c, src/bus/ejtag_dma.c,
    src/bus/pxa2x0.c, src/bus/zefant-xs3.c, src/bus/jopcyc.c,
    src/bus/s3c4510x.c, src/bus/ejtag.c: skip operations of *_bus_init()
    if TAP is not in RUNTEST/IDLE state
    [ 2658604 ] Errors when part description contains commands accessing TAP

2009-03-04  Arnim Laeuger  <arniml>

  * src/bus/mpc5200.c: add additional address decoding to mpc5200 bus driver
    (Jeff Wittrock)

2009-03-02  Arnim Laeuger  <arniml>

  * data/freescale/PARTS: add stepping for MPC5200B (Jeff Wittrock)

2009-03-01  Arnim Laeuger  <arniml>

  * data/ti/PARTS, data/ti/tnetv1060/tnetv1060, data/ti/tnetv1060/STEPPINGS,
    data/Makefile.am:
    TI tnetv1060 (Kenny)

2009-02-27  Arnim Laeuger  <arniml>

  * doc/UrJTAG.txt: Warning about FTD2XX driver, USB FAQ.

  * src/cmd/flashmem.c, src/flash/flash.c, include/flash.h:
    [ 2645787 ] Bypass verify stage of flashmem cmd (Jeff Wittrock)

2009-02-26  Arnim Laeuger  <arniml>

  * data/Makefile.am, data/MANUFACTURERS, data/ti/PARTS,
    data/ti/tnetv1061/STEPPINGS, data/ti/tnetv1061/tnetv1061:
    TI tnetv1061 (Kenny)

  * src/svf/svf_flex.l:
    [ 2638083 ] SVF progress indicator not visible for some .svf files
    (William)

2009-02-25  Arnim Laeuger  <arniml>

  * src/svf/svf_flex.l: [ 2635979 ] Replace index() to strchr()
    (MURANAKA Masaki)

2009-02-23  Arnim Laeuger  <arniml>

  * src/tap/usbconn/libftdi.c, src/tap/usbconn/libftd2xx.c:
    keep JTAG dongle in current mode (Holger Schurig)

  * data/atmel/at32ap7000/at32ap7000: clarifications for AVR32 data
    (Holger Schurig)

2009-02-17  Mike Frysinger  <vapier@gentoo.org>

  * src/bus/mpc824x.c (setup_address): Return on unhandled sizes to avoid
    compiler warnings.

  * src/bsdl2jtag.c, src/bus/mpc824x.c, src/cmd/include.c, src/cmd/scan.c,
    src/cmd/shell.c, src/jim/intel_28f800b3.c, src/jim/some_cpu.c,
    src/jim/tap.c, src/part/data_register.c, src/tap/cable.c,
    src/tap/cable/generic.c, src/tap/cable/jim.c, src/tap/cable/jlink.c,
    src/tap/cable/xpc.c, src/tap/usbconn/libusb.c: Remove spurious semicolons
    from places they do not belong (like at the end of braces).

2009-02-16  Arnim Laeuger  <arniml>

  * doc/UrJTAG.txt: some FAQs

2009-02-13  Mike Frysinger  <vapier@gentoo.org>

  * include/chain.h, include/tap.h, src/tap/chain.c, src/tap/tap.c: Add a
    prefix to all local variables named "exit" to avoid shadowing the system
    exit() function.

  * src/cmd/print.c (cmd_print_run): Use puts() to display the formatted buffer
    rather than printf() to avoid security issues with dynamically generated
    format strings, and to avoid warnings generated by such compilers:
    print.c:111: warning: format not a string literal and no format arguments

  * configure.ac: Put our local -I paths into CPPFLAGS before anything coming
    from the user as we want to make sure our local paths take precedence.
    Reported by Steve Franks from a FreeBSD report.

2009-02-11  Arnim Laeuger  <arniml>

  * src/bsdl/bsdl_sem.c: return proper error code to upper level

2009-02-07  Arnim Laeuger  <arniml>

  * doc/UrJTAG.txt: turn http links into real hyperlinks

  * doc/UrJTAG.txt: libftdi URL changed

2009-02-06  Arnim Laeuger  <arniml>

  * src/tap/cable/ft2232.c: fix nSRST for flyswatter (Kees Jongenburger)

2009-01-26  Kolja Waschk <kawk>

  * UrJTAG.nsi: Script to create Windows installer using NSIS.

2009-01-22  Mike Frysinger  <vapier@gentoo.org>

  * src/cmd/include.c: Include ctype.h for isalpha().

  * src/bsdl/bsdl_sem.c (create_register): Use %zu for size_t with printf().

  * src/tap/detect.c (detect_parts): Use the PRIX64 format string for 64bit
    types with printf().

  * src/part/part.c (part_print): Use const markings with const strings.
  * src/cmd/include.c (cmd_include_or_script_run): Likewise.

  * sysdep.h: Redirect swprintf() calls to _snwprintf() for Windows as they
    implemented a different function from ISO C (theirs does not take a count).

2009-01-19  Kolja Waschk <kawk>

  * doc/UrJTAG.txt,
    include/cable.h, include/chain.h, include/pod.h, include/Makefile.am,
    src/cmd/cmd.c, src/cmd/pod.c, src/cmd/Makefile.am, src/tap/cable.c,
    src/tap/chain.c, src/tap/cable/wiggler.c, src/tap/cable/arcom.c,
    src/tap/cable/mpcbdm.c, src/tap/cable/ts7800.c,
    src/tap/cable/usbblaster.c, src/tap/cable/jlink.c,
    src/tap/cable/generic.c, src/tap/cable/vision_ep9307.c,
    src/tap/cable/ea253.c, src/tap/cable/triton.c, src/tap/cable/ei012.c,
    src/tap/cable/byteblaster.c, src/tap/cable/generic.h,
    src/tap/cable/ft2232.c, src/tap/cable/wiggler2.c,
    src/tap/cable/keithkoep.c, src/tap/cable/lattice.c,
    src/tap/cable/dlc5.c, src/tap/cable/xpc.c, src/svf/svf.c:
    [ 2187351 ] Direct JTAG signal access, get/set_trst extension;
    Integrated changes from getset_pod branch, substituting the
    get/set_trst cable functions with more mighty get/set_signal
    functions. Finally, this gives low level access to cable signals
    as Sebastian Hesselbarth suggested and implemented first (thanks).
    Arnim implemented it for the FTDI cable drivers, while I worked
    on the parport cable drivers and new "pod" command.

2009-01-16  Arnim Laeuger  <arniml>

  * src/cmd/parse.c: flush_chain() between commands read from file
    [ 2499176 ] No chain_flush() when executing commands from file

2009-01-03  Arnim Laeuger  <arniml>

  * configure.ac, src/bus/bscoach.c, src/bus/buses.c,
    src/bus/buses.h, src/bus/Makefile.am:
    [ 2187115 ] Bus driver for Goepel Boundary Scan Coach
    (by Markus Schneider)

2008-12-23  Arnim Laeuger  <arniml>

   * src/svf/svf.c: added debug output for svf_compare_tdo()

2008-12-23  Kolja Waschk <kawk>

   * src/tap/parport/direct.c, configure.ac, doc/UrJTAG.txt:
     Dynamically load the InpOut32.dll for parallel port access. Tested
     in MinGW environment (Cygwin GCC with -mno-cygwin flag), and 
     documented how to compile it. Could build a distributable EXE now.

   * src/cmd/usleep.c, sysdep.h: usleep() is declared in
     unistd.h, also present in modern MinGW environments.
     Defining it in sysdep.h collides with unistd.h. 

2008-12-22  Arnim Laeuger  <arniml>

   * src/tap/cable/usbblaster.c:
     limit maximum number of bytes queued, equivalent for
     Bug 2456024 - FTD2XX fails with certain SVF file

   * src/tap/cable/ft2232.c:
     set cable frequency to real FT2232 frequency

   * src/tap/usbconn/libftdi.c, src/tap/usbconn/libftd2xx.c,
     include/usbconn/libftdx.h, src/tap/cable/ft2232.c:
     increased MPSSE buffer size from 4k to 64k
     mitigates performance decrease for mid-sized clock operations

2008-12-21  Kolja Waschk <kawk>

   * src/svf/svf.c: Fix 2456021 - SVF compare_tdo flaw

   * src/tap/cable/ft2232.c, src/tap/cable/cmd_xfer.c,
     src/tap/cable/cmd_xfer.h: limit maximum number of bytes queued 
     into one cmd buffer. Should fix problems with high clocks count for
     SVF runtest execution (Bug 2456024 - FTD2XX fails with certain SVF file)

   * configure.ac, src/tap/parport/direct.c: added detection of InpOut32
     library and support for using it for I/O port access even under Vista

2008-12-17  Kolja Waschk <kawk>

   * src/tap/discovery.c: Optional (#ifdef) printf for discovery debugging

2008-12-16  Kolja Waschk <kawk>

   * data/Makefile.am: Added bcm6358 files, thanks Anselmo Luginbuehl

2008-12-09  Kolja Waschk <kawk>

   * data/broadcom/bcm6358, data/broadcom/bcm6358/bcm6358,
     data/broadcom/bcm6358/STEPPINGS, data/broadcom/PARTS:
     [ 2412479 ] neufbox4 support. BCM6358 data files (by
     Julien Aube, slightly modified)

   * src/flash/amd.c: [ 2412481 ] neufbox4 support: MX29LV640B
     recognition (by Julien Aube)

2008-12-08 Julien Aube  <obconseil@gmail.com>

   * src/bus/ejtag_dma.c, src/bus/Makefile.am, src/bus/buses.c,
     src/bus/buses.h, configure.ac: [ 2412486 ] Support for ejtag in DMA mode.

2008-12-07  Mike Frysinger  <vapier@gentoo.org>

   * data/analog/bf518/bf518, data/analog/bf518/STEPPINGS, data/analog/PARTS,
     data/Makefile.am: Initial support for BF518 processors.

   * data/analog/bf548/STEPPINGS: Add 0.3 silicon revision.

   * data/analog/PARTS: Add BF534 and BF548M ids.

2008-12-03  Arnim Laeuger  <arniml>

   * src/tap/cable/ft2232.c, src/tap/cable/generic_usbconn.c,
     src/tap/cable.c, doc/UrJTAG.txt:
     [ 2382324 ] Patch to add support for TinCanTools Flyswatter JTAG cable
     (Mark Norman)

   * include/flash.h, src/flash/amd_flash.c, src/flash/amd.c, 
     src/flash/intel.c, src/flash/flash.c, configure.ac:
     restructure multi-byte flash programming support
     flashmem no longer needs to know about the capabilities of
     the flash chip to handle multi-byte programming

2008-12-02  Arnim Laeuger  <arniml>

   * include/flash/intel.h, src/flash/intel.c:
     support for multi-byte write mode
     chips must match the following criteria to qualify
     - CFI data specifies multi-byte write mode supported
     - handled by intel.c
     - 8 or 16 bit interface

2008-12-01  Arnim Laeuger  <arniml>
   * include/flash.h, src/flash/amd_flash.c, src/flash/amd.c,
     src/flash/intel.c, src/flash/flash.c, configure.ac:
     support multi-byte write mode
     chips must match the following criteria to qualify
     - CFI data specifies multi-byte write mode supported
     - handled by amd.c
     - 8 or 16 bit interface

   * src/bus/prototype.c (prototype_bus_new): consider amode parameter properly
     when specified on the command line. pervious version didn't set ASHIFT in
     this case.

   * src/flash/amd.c (amd_flash_print_info): added Spansion S92GL chips

2008-11-16  Kolja Waschk  <kawk>

   * src/bus/ejtag.c: Support BCM6348/EJTAG 3.1 (by Andy Potter/livebox)

2008-10-30  Arnim Laeuger  <arniml>

   * src/svf/svf_bison.y, src/svf/svf.c, src/svf/svf.h:
     removed obsolete parameter

   * include/svf.h, src/cmd/svf.c, src/svf/svf.c,
     src/svf/svf_bison.y, src/svf/svf.h, doc/UrJTAG.txt:
     add the ref_freq option to svf command

2008-10-28  Arnim Laeuger  <arniml>

   * src/cmd/parse.c (jtag_parse_stream): avoid clipping message when
     reading comments (Hartley)

   * renamed data/lattice/lfec2-12e/lfec2_12e to lfec2-12e

   * data/MANUFACTURERS, data/lattice/lfec2-12e, data/lattice/lfec2-12e/lfec2_12e,
     data/lattice/lfec2-12e/STEPPINGS, data/lattice/PARTS, data/lattice/lc4064zc,
     data/lattice/lc4064zc/lc4064zc, data/lattice/lc4064zc/STEPPINGS, data/marvell/88e1118,
     data/marvell/88e1118/88e1118, data/marvell/88e1118/STEPPINGS, data/marvell/88f5182,
     data/marvell/88f5182/88f5182-a2, data/marvell/88f5182/STEPPINGS, data/marvell/PARTS,
     data/Makefile.am:
     [ 2187342 ] Technologic Systems TS-7800 JTAG support
     (Catalin Ionescu)
     part description files

2008-10-26  Arnim Laeuger  <arniml>

   * configure.ac, doc/UrJTAG.txt, src/tap/Makefile.am,
     src/tap/cable/ts7800.c, src/tap/cable.c, THANKS:
     [ 2187342 ] Technologic Systems TS-7800 JTAG support
     (Catalin Ionescu, Stanislav Sinyagin)
     cable driver only

   * src/cmd/print.c, doc/UrJTAG.txt:
     [ 1964834 ] Add 'print instruction' support to print command
     (Hartley Sweeten)

2008-10-23  Arnim Laeuger  <arniml>

   * src/svf/svf_bison.y: initialize max_time to 0.0 if
     the optional MAXIMUM is missing for RUNTEST commands

2008-10-22  Arnim Laeuger  <arniml>

   * src/tap/cable/generic.c: make calibration loop more tolerant for
     less accurate OS timers

2008-10-18  Kolja Waschk <kawk

   * src/cmd/usleep.c, src/cmd/cmd.c, src/cmd/Makefile.am:
     Add usleep command (Stanislav Sinyagin)

2008-10-18  Kolja Waschk <kawk>

   * src/tap/cable/ft2232.c, src/tap/cable/generic_usbconn.c:
     Add support for ARM-USB-OCD TINY (Sebastian Hesselbarth)

2008-10-13  Jie Zhang  <jie.zhang@analog.com>

   * src/tap/cable/ft2232.c (ft2232_transfer_schedule): Don't
     access memory out of bounds.

2008-10-11  Arnim Laeuger  <arniml>

   * src/bus/ejtag.c (ejtag_bus_init): added remaining return values
     (Stanislav Sinyagin)

2008-09-27  Arnim Laeuger  <arniml>

   * include/jtag.h, src/cmd/detect.c, src/cmd/initbus.c,
     src/cmd/print.c, src/bus/bf548_ezkit.c, src/bus/fjmem.c,
     src/bus/ppc405ep.c, src/bus/sh7727.c, src/bus/prototype.c,
     src/bus/sa1110.c, src/bus/ppc440gx_ebc8.c, src/bus/tx4925.c,
     src/bus/sh7750r.c, src/bus/pxa2x0.c, src/bus/bf533_stamp.c,
     src/bus/bf533_ezkit.c, src/bus/bf537_stamp.c, src/bus/ixp425.c,
     src/bus/avr32.c, src/bus/h7202.c, src/bus/zefant-xs3.c,
     src/bus/mpc824x.c, src/bus/bcm1250.c, src/bus/sharc21065l.c,
     src/bus/readmem.c, src/bus/au1500.c, src/bus/lh7a400.c,
     src/bus/sh7751r.c, src/bus/generic_bus.c, src/bus/mpc5200.c,
     src/bus/jopcyc.c, src/bus/bf561_ezkit.c, src/bus/slsup3.c,
     src/bus/writemem.c, src/bus/s3c4510x.c, src/bus/ejtag.c,
     src/flash/amd_flash.c, src/flash/cfi.c, src/flash/jedec_exp.c,
     src/flash/jedec.c, src/flash/intel.c:
     [ 2102453 ] Use macros for std return values instead of literals

2008-09-16  Mike Frysinger  <vapier@gentoo.org>

   * data/analog/bf527/STEPPINGS: Add bf527 0.2.
   * data/analog/bf533/STEPPINGS: Add bf533 0.5 and 0.6.
   * data/analog/bf548/STEPPINGS: Add bf548 0.2.

2008-09-15  Arnim Laeuger  <arniml>

   * src/svf/svf.h, src/svf/svf_flex.l: SVF player fix for
     [ 2112823 ] Conversion with strtod and similar influenced by locale

2008-09-14  Kolja Waschk <kawk>

   Version 0.9 released.

2008-09-14  Kolja Waschk <kawk>

   * configure.ac, NEWS, po/fr.po, po/rw.po, po/sk.po: Preparation
     for release of UrJTAG 0.9 tarball
   * include/Makefile.am, src/bsdl/Makefile.am: list new header
     files here so they get included in distribution

2008-09-09  Arnim Laeuger  <arniml>

   * src/cmd/detect.c: test correct return value of bus->driver->init()

   * src/bsdl2jtag.c: fix from and to for downto vectors

2008-09-06  Arnim Laeuger  <arniml>

   * src/tap/usbconn/libftdi.c, src/tap/usbconn/libftd2xx.c:
     [ 2091744 ] Automatic detection of alternative VID/PID cables broken

   * src/tap/cable/usbblaster.c: set fixed frequency and print warning
     if a different frequency is requested

   * src/tap/cable/generic.c: fixed calibration loop

   * src/svf/svf.c: require frequency setting from cable for
     RUNTEST MIN SEC command, fixes
     [ 2090432 ] SVF programming problem with "x SEC" arg to runtest
     also restore previous frequency setting at end of SVF execution

2008-09-04  Arnim Laeuger  <arniml>

   * configure.ac, src/tap/usbconn/libftd2xx.c,
     src/tap/usbconn/libftdi.c: forward and use the desc= paramter
     [ 2085244 ] Wrong device chosen by ftd2xx driver

2008-09-03  Arnim Laeuger  <arniml>

   * src/tap/usbconn/libftd2xx.c,  src/tap/usbconn/libftdi.c:
     use puts() and printf() instead of perror()

2008-09-03  Mike Frysinger  <vapier@gentoo.org>

   * src/tap/parport/ppdev.c, src/tap/cable/wiggler.c,
     src/tap/cable/generic_parport.c: Change HAVE_LINUX_PPDEV_H to
     ENABLE_LOWLEVEL_PPDEV.

   * src/tap/cable/generic_parport.c, src/tap/cable/wiggler.c:
     Fix typo: PPDEF -> PPDEV.

2008-08-27  Arnim Laeuger  <arniml>

   * include/Makefile.am, include/bsdl.h, include/bsdl_mode.h,
     src/cmd/include.c, src/cmd/bsdl.c, src/bsdl/vhdl_parser.h,
     src/bsdl/bsdl_msg.h, src/bsdl/bsdl.c, src/bsdl/bsdl_bison.y,
     src/bsdl/vhdl_flex.l, src/bsdl/bsdl_parser.h, src/bsdl/bsdl_sem.c,
     src/bsdl/bsdl_flex.l, src/bsdl/bsdl_types.h, src/bsdl/vhdl_bison.y,
     src/tap/detect.c: cleaned-up bsdl subsystem, avoid double reading
     during detect, commenting

2008-08-24  Arnim Laeuger  <arniml>

   * src/bsdl/bsdl_sem.c (bsdl_process_cell_info): fix error with
     repeated usage of cmd[]

2008-08-22  Arnim Laeuger  <arniml>

   * src/bsdl/vhdl_bison.y: enhanced error reporting

   * configure.ac, data/Makefile.am, src/Makefile.am,
     src/bsdl/Makefile.am, src/bsdl/bsdl.c, src/bsdl/bsdl_bison.y,
     src/bsdl/bsdl_flex.l, src/bsdl/bsdl_sem.c, src/bsdl/bsdl_sysdep.h,
     data/bsdl/STD_1532_2001, data/bsdl/STD_1532_2002, src/bsdl/bsdl_msg.h,
     src/bsdl/bsdl_parser.h, src/bsdl/bsdl_types.h, src/bsdl/vhdl_bison.y,
     src/bsdl/vhdl_flex.l, src/bsdl/vhdl_parser.h, src/bsdl/bsdl_local.h:
     merged from branches/bsdl 1304:1340
     rewrite of BSDL parser

2008-07-15  Arnim Laeuger  <arniml>

   * doc/UrJTAG.txt, src/cmd/dr.c (cmd_dr_help):
     document feature to set active data register with dr

2008-07-14  Arnim Laeuger  <arniml>

   * include/chain.h, include/tap.h, src/cmd/reset.c, src/tap/detect.c,
     src/tap/chain.c, src/tap/tap.c, src/bus/fjmem.c, src/bus/avr32.c:
     [ 1873260 ] Command 'reset' does not reset internal states
     next round to fix this one

2008-07-10  Arnim Laeuger  <arniml>

   * src/tap/usbconn/libftd2xx.c (usbconn_ftd2xx_open): perform device reset
     and RX purge

2008-07-09  Arnim Laeuger  <arniml>

   * src/tap/usbconn/libftd2xx.c: added some debugging messages

   * src/tap/usbconn/libftd2xx.c (usbconn_ftd2xx_write),
     src/tap/usbconn/libftdi.c (usbconn_ftdi_write): don't subtract from
     p->to_recv

2008-07-03  Mike Frysinger  <vapier@gentoo.org>

   * src/lib/ansidecl.h, src/lib/libiberty.h: Import headers from binutils
     that the local src/lib/ files need for relocatable support.
   * src/lib/Makefile.am (libiberty_sources): Add local headers to the list.

2008-07-03  Jie Zhang  <jie.zhang@analog.com>

   * src/bsdl/bsdl.c: Remove trailing whitespaces.
   * src/lib/make-relative-prefix.c: Likewise.
   * src/lib/lbasename.c: Likewise.
   * src/lib/lrealpath.c: Likewise.
   * doc/UrJTAG.txt: Likewise.
   * data/atmel/PARTS: Likewise.

   * src/bus/bf537_stamp.c (bus_driver_t bf538f_ezkit_bus): New.
     (bus_driver_t bf526_ezkit_bus): New.
   * src/bus/buses.c (bus_drivers[]): Add bf526_ezkit_bus and
       bf538f_ezkit_bus.
   * src/bus/buses.h (bf526_ezkit_bus): Declare.
     (bf538f_ezkit_bus): Declare.
   * src/bus/Makefile.am (libbus_a_SOURCES): Add bf537_stamp.c
       for bf526 ezkit and bf538f ezkit.
   * configure.ac: Add bf526_ezkit and bf538f_ezkit.
   * data/analog/PARTS: Add bf538.
   * analog/bf538/STEPPINGS: New file.
   * analog/bf538/bf538: New file.
   * data/Makefile.am (nobase_dist_pkgdata_DATA): Add
       analog/bf538/STEPPINGS and analog/bf538/bf538.

   * src/tap/cable/ft2232.c: Make the gnICE comment a little more specific.

2008-07-02  Jie Zhang  <jie.zhang@analog.com>

   * include/bus_driver.h (struct bus_driver): Add driver argument
       to new_bus.
   * src/cmd/initbus.c (cmd_initbus_run): Pass driver to new_bus.
   * src/bus/bf548_ezkit.c (bf548_ezkit_bus_new): Add driver
       argument and use it.
   * src/bus/fjmem.c (fjmem_bus_new): Likewise.
   * src/bus/ppc405ep.c (ppc405ep_bus_new): Likewise.
   * src/bus/sh7727.c (sh7727_bus_new): Likewise.
   * src/bus/prototype.c (prototype_bus_new): Likewise.
   * src/bus/sa1110.c (sa1110_bus_new): Likewise.
   * src/bus/ppc440gx_ebc8.c (ppc440gx_ebc8_bus_new): Likewise.
   * src/bus/sh7750r.c (sh7750r_bus_new): Likewise.
   * src/bus/tx4925.c (tx4925_bus_new): Likewise.
   * src/bus/bf533_stamp.c (bf533_stamp_bus_new): Likewise.
   * src/bus/bf533_ezkit.c (bf533_ezkit_bus_new): Likewise.
   * src/bus/ixp425.c (ixp425_bus_new): Likewise.
   * src/bus/avr32.c (avr32_bus_new): Likewise.
   * src/bus/zefant-xs3.c (zefant_xs3_bus_new): Likewise.
   * src/bus/h7202.c (h7202_bus_new): Likewise.
   * src/bus/mpc824x.c (mpc824x_bus_new): Likewise.
   * src/bus/bcm1250.c (bcm1250_bus_new): Likewise.
   * src/bus/sharc21065l.c (sharc_21065L_bus_new): Likewise.
   * src/bus/au1500.c (au1500_bus_new): Likewise.
   * src/bus/lh7a400.c (lh7a400_bus_new): Likewise.
   * src/bus/sh7751r.c (sh7751r_bus_new): Likewise.
   * src/bus/mpc5200.c (mpc5200_bus_new): Likewise.
   * src/bus/jopcyc.c (jopcyc_bus_new): Likewise.
   * src/bus/bf561_ezkit.c (bf561_ezkit_bus_new): Likewise.
   * src/bus/slsup3.c (slsup3_bus_new): Likewise.
   * src/bus/s3c4510x.c (s3c4510_bus_new): Likewise.
   * src/bus/ejtag.c (ejtag_bus_new): Likewise.
   * src/bus/pxa2x0.c (pxa2xx_bus_new_common): Remove.
     (pxa2xx_bus_new): New.
     (pxa2x0_bus_new): Remove.
     (pxa27x_bus_new): Remove.
     (pxa2xx_bus_printinfo): New.
     (pxa2x0_bus_printinfo): Remove.
     (pxa27x_bus_printinfo): Remove.
     (bus_driver_t pxa2x0_bus): Replace pxa2x0_bus_new with
       pxa2xx_bus_new. Replace pxa2x0_bus_printinfo with
       pxa2xx_bus_printinfo.
     (bus_driver_t pxa27x_bus): Replace pxa27x_bus_new with
       pxa2xx_bus_new. Replace pxa27x_bus_printinfo with
       pxa2xx_bus_printinfo.
   * src/bus/bf537_stamp.c (bf537_stamp_bus_new_1): Rename
       to ...
     (bf537_stamp_bus_new): ... this. And use the new driver
       argument.
     (bf537_ezkit_bus_new): Remove.
     (bf527_ezkit_bus_new): Remove.
     (bf537_stamp_bus_printinfo): Use description in bus driver.
     (bf537_ezkit_bus_printinfo): Remove.
     (bf527_ezkit_bus_printinfo): Remove.
     (BF537_STAMP_BUS_FUNCTIONS): Define.
     (bus_driver_t bf537_stamp_bus): Use BF537_STAMP_BUS_FUNCTIONS.
     (bus_driver_t bf537_ezkit_bus): Likewise.
     (bus_driver_t bf527_ezkit_bus): Likewise.

2008-06-28  Kolja Waschk <kawk>

   * data/sigma/smp8634/smp8634, data/sigma/smp8634/STEPPINGS,
     data/sigma/PARTS, data/Makefile.am: Added Sigma SMP8634 (andi2k)
   * doc/UrJTAG.txt: FAQ about CVS needed for autogen.sh and superuser
     rights being needed for running "make install" (frankvh)

2008-06-27  Arnim Laeuger  <arniml>

   * UrJTAG.txt: JTAGkey-Tiny

   * UrJTAG.txt: update of bus driver init() function
   * include/bus_driver.h, src/cmd/initbus.c, src/bus/bf548_ezkit.c,
     src/bus/fjmem.c, src/bus/ppc405ep.c, src/bus/sh7727.c,
     src/bus/prototype.c, src/bus/sa1110.c, src/bus/ppc440gx_ebc8.c,
     src/bus/tx4925.c, src/bus/sh7750r.c, src/bus/pxa2x0.c,
     src/bus/bf533_stamp.c, src/bus/bf533_ezkit.c, src/bus/bf537_stamp.c,
     src/bus/ixp425.c, src/bus/avr32.c, src/bus/h7202.c,
     src/bus/zefant-xs3.c, src/bus/mpc824x.c, src/bus/bcm1250.c,
     src/bus/sharc21065l.c, src/bus/au1500.c, src/bus/lh7a400.c,
     src/bus/sh7751r.c, src/bus/generic_bus.c, src/bus/mpc5200.c,
     src/bus/jopcyc.c, src/bus/bf561_ezkit.c, src/bus/slsup3.c,
     src/bus/s3c4510x.c, src/bus/ejtag.c, src/bus/generic_bus.h:
     [ 1984813 ] Bus driver cleanup, separate (*init) and (*prepare)
     functions (Hartley Sweeten)

2008-06-24  Jie Zhang  <jie.zhang@analog.com>

   From Michael Hennerich <michael.hennerich@analog.com>
   * src/tap/cable.c (ft2232_bfin_ujtag_cable_driver): Rename to ...
     (ft2232_gnice_cable_driver): ... this.
     (cable_drivers[]): Change accordingly.
   * src/tap/cable/generic_usbconn.c
     (usbconn_cable_bfin_ujtag_ftd2xx): Rename to ...
     (usbconn_cable_gnice_ftd2xx): ... this.
     (usbconn_cable_bfin_ujtag_ftdi): Rename to ...
     (usbconn_cable_gnice_ftdi): ... this.
   * src/tap/cable/ft2232.c (BIT_BFIN_UJTAG_nTRST): Rename to ...
     (BIT_GNICE_nTRST): ... this.
     (BIT_BFIN_UJTAG_nLED): Rename to ...
     (BIT_GNICE_nLED): ... this.
     (BITMASK_BFIN_UJTAG_nTRST): Rename to ...
     (BITMASK_GNICE_nTRST): ... this.
     (BITMASK_BFIN_nLED): Rename to ...
     (BITMASK_GNICE_nLED): ... this.
     (ft2232_bfin_urjtag_init): Rename to ...
     (ft2232_gnice_init): ... this.
     (ft2232_bfin_urjtag_done): Rename to ...
     (ft2232_gnice_done): ... this.
     (usbconn_cable_bfin_ujtag_ftdi): Rename to ...
     (usbconn_cable_gnice_ftdi): ... this.
     (ft2232_usbcable_help): Change accordingly.
     (ft2232_bfin_ujtag_cable_driver): Rename to ...
     (ft2232_gnice_cable_driver): ... this.
     (usbconn_cable_bfin_ujtag_ftdi): Rename to ...
     (usbconn_cable_gnice_ftdi): ... this.
     (usbconn_cable_bfin_ujtag_ftd2xx): Rename to ...
     (usbconn_cable_gnice_ftd2xx): ... this.
   * po/fr.po: Update.
   * po/rw.po: Update.
   * po/sk.po: Update.

2008-06-21  Arnim Laeuger  <arniml>

   * src/bus/bf548_ezkit.c, src/bus/fjmem.c, src/bus/ppc405ep.c,
     src/bus/sh7727.c, src/bus/prototype.c, src/bus/sa1110.c,
     src/bus/ppc440gx_ebc8.c, src/bus/tx4925.c, src/bus/sh7750r.c,
     src/bus/pxa2x0.c, src/bus/bf533_stamp.c, src/bus/bf533_ezkit.c,
     src/bus/bf537_stamp.c, src/bus/ixp425.c, src/bus/h7202.c,
     src/bus/mpc824x.c, src/bus/bcm1250.c, src/bus/sharc21065l.c,
     src/bus/au1500.c, src/bus/lh7a400.c, src/bus/sh7751r.c,
     src/bus/generic_bus.c, src/bus/mpc5200.c, src/bus/bf561_ezkit.c,
     src/bus/slsup3.c, src/bus/generic_bus.h:
     [ 1984813 ] Bus driver cleanup, generic_bus_prepare function for
     all bus drivers that just load the EXTEST instruction
     (Hartley Sweeten)

2008-06-18  Arnim Laeuger  <arniml>

   * include/bus_driver.h, src/bus/bf548_ezkit.c, src/bus/fjmem.c,
     src/bus/ppc405ep.c, src/bus/sh7727.c, src/bus/prototype.c,
     src/bus/sa1110.c, src/bus/ppc440gx_ebc8.c, src/bus/tx4925.c,
     src/bus/sh7750r.c, src/bus/pxa2x0.c, src/bus/bf533_stamp.c,
     src/bus/bf533_ezkit.c, src/bus/bf537_stamp.c, src/bus/ixp425.c,
     src/bus/avr32.c, src/bus/h7202.c, src/bus/zefant-xs3.c,
     src/bus/mpc824x.c, src/bus/bcm1250.c, src/bus/sharc21065l.c,
     src/bus/au1500.c, src/bus/lh7a400.c, src/bus/sh7751r.c,
     src/bus/mpc5200.c, src/bus/jopcyc.c, src/bus/bf561_ezkit.c,
     src/bus/slsup3.c, src/bus/s3c4510x.c, src/bus/ejtag.c:
     [ 1984813 ] Bus driver cleanup, uniquify chain and part in
     bus_t struct (Hartley Sweeten)

2008-06-16  Arnim Laeuger  <arniml>

   * src/cmd/initbus.c (cmd_initbus_run),
     src/cmd/initbus.c, src/bus/bf548_ezkit.c, src/bus/fjmem.c,
     src/bus/ppc405ep.c, src/bus/sh7727.c, src/bus/prototype.c,
     src/bus/sa1110.c, src/bus/ppc440gx_ebc8.c, src/bus/tx4925.c,
     src/bus/sh7750r.c, src/bus/pxa2x0.c, src/bus/bf533_stamp.c,
     src/bus/bf533_ezkit.c, src/bus/bf537_stamp.c, src/bus/ixp425.c,
     src/bus/avr32.c, src/bus/h7202.c, src/bus/zefant-xs3.c,
     src/bus/mpc824x.c, src/bus/bcm1250.c, src/bus/sharc21065l.c,
     src/bus/au1500.c, src/bus/lh7a400.c, src/bus/sh7751r.c,
     src/bus/mpc5200.c, src/bus/jopcyc.c, src/bus/bf561_ezkit.c,
     src/bus/slsup3.c, src/bus/s3c4510x.c, src/bus/ejtag.c:
     [ 1984813 ] Bus driver cleanup, remove unnecessary sanity checking
     (Hartley Sweeten)

2008-06-11  Arnim Laeuger  <arniml>

   * po/fr.po, po/rw.po, po/sk.po: updated

   * src/tap/cable/generic.c (fmax): define fallback in case libm doesn't
     provide fmax()
   * configure.ac: detect availability of fmax() in libm

   * src/bus/bf548_ezkit.c, src/bus/ppc405ep.c, src/bus/sh7727.c,
     src/bus/sa1110.c, src/bus/ppc440gx_ebc8.c, src/bus/tx4925.c,
     src/bus/sh7750r.c, src/bus/pxa2x0.c, src/bus/bf533_stamp.c,
     src/bus/bf533_ezkit.c, src/bus/bf537_stamp.c, src/bus/ixp425.c,
     src/bus/h7202.c, src/bus/mpc824x.c, src/bus/bcm1250.c,
     src/bus/sharc21065l.c, src/bus/au1500.c, src/bus/lh7a400.c,
     src/bus/sh7751r.c, src/bus/mpc5200.c, src/bus/jopcyc.c,
     src/bus/bf561_ezkit.c, src/bus/slsup3.c, src/bus/s3c4510x.c:
     [ 1984813 ] Bus driver cleanup, second step of part 2) (Hartley Sweeten)
     use generic_bus_attach_sig() in all bus drivers

2008-06-10  Arnim Laeuger  <arniml>

   * src/bus/generic_bus.c, src/bus/generic_bus.h, src/bus/zefant-xs3.c:
     [ 1984813 ] Bus driver cleanup, first step of part 2) (Hartley Sweeten)
     generic_bus_attach_sig() added

   * src/bus/au1500.c, src/bus/avr32.c, src/bus/bcm1250.c,
     src/bus/bf533_ezkit.c, src/bus/bf533_stamp.c, src/bus/bf537_stamp.c,
     src/bus/bf548_ezkit.c, src/bus/bf561_ezkit.c, src/bus/ejtag.c,
     src/bus/fjmem.c, src/bus/generic_bus.c, src/bus/generic_bus.h,
     src/bus/h7202.c, src/bus/ixp425.c, src/bus/jopcyc.c,
     src/bus/lh7a400.c, src/bus/mpc5200.c, src/bus/mpc824x.c,
     src/bus/ppc405ep.c, src/bus/ppc440gx_ebc8.c, src/bus/prototype.c,
     src/bus/pxa2x0.c, src/bus/s3c4510x.c, src/bus/sa1110.c,
     src/bus/sh7727.c, src/bus/sh7750r.c, src/bus/sh7751r.c,
     src/bus/sharc21065l.c, src/bus/slsup3.c, src/bus/tx4925.c,
     src/bus/zefant-xs3.c:
     [ 1984813 ] Bus driver cleanup, second step of part 4) (Hartley Sweeten)
     generic_bus_read() added

2008-06-09  Arnim Laeuger  <arniml>

   * src/bus/bf548_ezkit.c, src/bus/fjmem.c, src/bus/ppc405ep.c,
     src/bus/sh7727.c, src/bus/prototype.c, src/bus/sa1110.c,
     src/bus/ppc440gx_ebc8.c, src/bus/tx4925.c, src/bus/sh7750r.c,
     src/bus/pxa2x0.c, src/bus/bf533_stamp.c, src/bus/bf533_ezkit.c,
     src/bus/bf537_stamp.c, src/bus/ixp425.c, src/bus/avr32.c,
     src/bus/h7202.c, src/bus/zefant-xs3.c, src/bus/mpc824x.c,
     src/bus/bcm1250.c, src/bus/sharc21065l.c, src/bus/au1500.c,
     src/bus/lh7a400.c, src/bus/sh7751r.c, src/bus/mpc5200.c,
     src/bus/jopcyc.c, src/bus/bf561_ezkit.c, src/bus/slsup3.c,
     src/bus/s3c4510x.c, src/bus/ejtag.c:
     [ 1984813 ] Bus driver cleanup, first step of part 4) (Hartley Sweeten)

   * src/svf/svf_flex.l, src/flash/flash.c (flashmem):
     avoid '\r' in i18n strings (Hartley Sweeten)
   * po/fr.po, po/rw.po, po/sk.po: remove '\r'

2008-06-06  Kolja Waschk <kawk>

   * src/bus/bcm1250.c: Allow for 8 IO_CS_L signals, not just 7
      (Hartley Sweeten)

   * src/bus/bf548_ezkit.c, src/bus/fjmem.c, src/bus/ppc405ep.c,
     src/bus/sh7727.c, src/bus/prototype.c, src/bus/sa1110.c,
     src/bus/ppc440gx_ebc8.c, src/bus/sh7750r.c, src/bus/tx4925.c,
     src/bus/pxa2x0.c, src/bus/bf533_stamp.c, src/bus/bf533_ezkit.c,
     src/bus/bf537_stamp.c, src/bus/ixp425.c, src/bus/avr32.c,
     src/bus/zefant-xs3.c, src/bus/h7202.c, src/bus/mpc824x.c,
     src/bus/bcm1250.c, src/bus/sharc21065l.c, src/bus/au1500.c,
     src/bus/lh7a400.c, src/bus/sh7751r.c, src/bus/generic_bus.c,
     src/bus/mpc5200.c, src/bus/jopcyc.c, src/bus/Makefile.am,
     src/bus/slsup3.c, src/bus/bf561_ezkit.c, src/bus/s3c4510x.c,
     src/bus/ejtag.c, src/bus/generic_bus.h: [ 1984813 ] Bus driver
      cleanup: Unified *bus_free functions and moved them to new
      src/bus/generic_bus.c/h (Hartley  Sweeten)

2008-06-05  Arnim Laeuger  <arniml>

   * src/tap/usbconn/libftdi.c: issue device reset in usbconn_ftdi_open(), fixes
     hang of FT245 chip when initializing the cable more than once
   * src/tap/cable/usbblaster.c: split get_tdo and transfer functions into schedule
     finish parts for deeper queueing with extended flush function

2008-06-05  Kolja Waschk <kawk>

   * src/bus/bf548_ezkit.c, src/bus/fjmem.c, src/bus/ppc405ep.c,
     src/bus/sh7727.c, src/bus/prototype.c, src/bus/sa1110.c,
     src/bus/ppc440gx_ebc8.c, src/bus/sh7750r.c, src/bus/tx4925.c,
     src/bus/pxa2x0.c, src/bus/bf533_stamp.c, src/bus/bf533_ezkit.c,
     src/bus/bf537_stamp.c, src/bus/ixp425.c, src/bus/avr32.c,
     src/bus/zefant-xs3.c, src/bus/h7202.c, src/bus/mpc824x.c,
     src/bus/bcm1250.c, src/bus/sharc21065l.c, src/bus/au1500.c,
     src/bus/lh7a400.c, src/bus/sh7751r.c, src/bus/mpc5200.c,
     src/bus/jopcyc.c, src/bus/slsup3.c, src/bus/bf561_ezkit.c,
     src/bus/s3c4510x.c, src/bus/ejtag.c: Partial [ 1984813 ]
      Bus driver cleanup: Changed mallocs to callocs, added (NULL) pointer
      for *init to the drivers where it was missing (Hartley Sweeten)

2008-05-29  Kolja Waschk <kawk>

   * src/tap/cable/wiggler.c src/tap/cable/generic_usbconn.c,
     src/tap/cable/usbblaster.c, src/tap/cable/vision_ep9307.c,
     src/tap/cable/jim.c, src/tap/cable/ft2232.c,
     src/tap/cable/generic_parport.c: More malloc/free cleanup
       in cable drivers (Hartley Sweeten)

2008-05-28  Kolja Waschk <kawk>

   * src/cmd/cable.c, src/tap/cable/wiggler.c,
     src/tap/cable/generic_usbconn.c, src/tap/cable/vision_ep9307.c,
     src/tap/cable/jim.c, src/tap/cable/ft2232.c, 
      src/tap/cable/usbblaster.c, src/tap/cable/generic_parport.c: Cable
      connect/disconnect cleanup, fix malloc/free issues (Hartley Sweeten)

2008-05-27  Arnim Laeuger  <arniml>

   * UrJTAG.txt: document progress option of svf command
   * src/cmd/svf.c (cmd_svf_run): new command option 'progress'
   * src/svf/svf.c (svf_run), include/svf.h (svf_run): new parameter
     print_progress
   * src/svf/svf_flex.l (fix_yylloc_nl): report line / total number

2008-05-26  Arnim Laeuger  <arniml>

   [adding svf progress output] (Steve Franks)
   * src/svf/svf_bison.y (svf_bison_init): hand down parameters for scanner
     initialization
   * src/svf/svf_flex.l: output progress indicator upon newline detection
   * src/svf/svf.c (svf_run): caluclate number of lines and pass result
     to scanner initialization
   * src/svf/svf.h: added "extra" data type for scanner

2008-05-26  Kolja Waschk <kawk>

   * src/bus/avr32.c, src/bus/buses.c, src/bus/buses.h,
     src/bus/Makefile.am, src/flash/amd.c, THANKS, configure.ac,
     doc/UrJTAG.txt, data/atmel/at32ap7000, data/atmel/at32ap7000/at32ap7000,
     data/atmel/at32ap7000/STEPPINGS, data/atmel/PARTS, data/Makefile.am:
     add support for Atmel's AT32AP7000 (by Gabor Juhos)

2008-05-24  Arnim Laeuger  <arniml>

   * src/tap/cable/usbblaster.c (usbblaster_connect): added missing
     malloc for cable_params

2008-05-23  Mike Frysinger  <vapier@gentoo.org>

   * data/analog/PARTS: Add BF526 id.

2008-05-21  Jie Zhang  <jie.zhang@analog.com>

   [ 1951767 ] bsdl2jtag cannot parse some bsdl files
   * src/bsdl2jtag.c (endline): Prevent `:' from being scanned in.

2008-05-21  Jie Zhang  <jie.zhang@analog.com>

   [ 1968455 ] Enter UPDATE state after register shift
   * include/chain.h (EXITMODE_UPDATE): Define.
   * src/tap/tap.c (tap_defer_shift_register): Enter Update-DR
     or Update-IR when requested.

2008-05-20  Arnim Laeuger  <arniml>

   * src/tap/cable/ft2232.c, src/tap/cable/usbblaster.c:
     typo in help string fixed
   * src/tap/cable/ft2232.c, src/tap/cable/usbblaster.c:
     run on top of usbconn drivers
   * src/tap/cable/cmd_xfer.c, src/tap/cable/cmd_xfer.h:
     provide command queueing functions to ft2232.c and usbblaster.c
   * src/tap/usbconn/libftd2xx.c, src/tap/usbconn/libftdi.c,
     include/usbconn/libftdx.h, src/tap/parport/ftdi.c,
     src/tap/parport/ftd2xx.c, src/tap/parport.c, src/tap/Makefile.am,
     src/tap/usbconn.c, src/tap/cable/generic_usbconn.c,
     src/tap/cable/generic_usbconn.h, doc/UrJTAG.txt:
     ftdi & ftd2xx drivers ported from parport to usbconn
   * src/tap/usbconn/libusb.c, include/usbconn.h: added read and write
   * configure.ac: --enable-parport renamed to --enable-lowlevel
     respective renaming for Makefile and C macros

2008-05-13  Kolja Waschk <kawk>

   * src/tap/cable/generic_usbconn.c: Read VID/PID as hexadecimal, fixes 
	 Bug [1962628] VID/PID for usbconn cables are parsed as decimal

2008-05-12  Kolja Waschk <kawk>

   * doc/jtag.1: Explanation of [file] argument, correct location
     of rc file (thanks Steve Franks for noticing)

2008-05-09  Mike Frysinger  <vapier@gentoo.org>

   * data/analog/PARTS, data/Makefile.am, data/analog/bf527/:
     Rename BF527c to BF527 and relocate files as appropriate.
   * data/analog/PARTS, data/Makefile.am, data/analog/bf548/:
     Rename BF549 to BF548 and relocate files as appropriate.
   * data/analog/bf527/STEPPINGS: Add support for bf527 0.1.

2005-05-06  Kolja Waschk <kawk>

   * acinclude.m4, src/cmd/cmd.c, src/jtag.c: 
     Update for [ 1940323 ] OS X support for UrJTAG (by Ville Voipio)

2008-05-05  Mike Frysinger  <vapier@gentoo.org>

   * src/svf/svf.c: Fix __MINGW32__ typo.
   * src/flash/amd.c: Remove _() around part names.
   * src/flash/amd_flash.c: Likewise.
   * src/lib/safe-ctype.c: Include from libiberty as it is needed on some
     non-POSIX ports (like mingw).
   * src/cmd/include.c (cmd_include_or_script_run): Add handling of absolute
     paths under Windows that take the form <letter>:\.
   * sysdep.h, src/flash/amd.c, src/flash/amd_flash.c, src/jtag.c: Move some
     Windows stub functions to sysdep.h so we don't have to redeclare them in
     every single file and so we don't trigger future bitrot.

2008-05-04  Mike Frysinger  <vapier@gentoo.org>

   * src/flash/amd.c: Handle chipid 0x22ed M29W640DT.

2008-05-02  Arnim Laeuger  <arniml>

   * src/tap/cable/generic_usbconn.c (generic_usbconn_connect):
     fix user_specified.driver comparison

2008-05-01  Mike Frysinger  <vapier@gentoo.org>

   * configure.ac: Check for libusb before libftdi since the latter needs
     the former.
   * configure.ac: Use AC_PATH_TOOL() instead of AC_PATH_PROG() so that we
     handle cross-compiling sanely.
   * configure.ac: Make LIBS/CPPFLAGS sane and consistent when checking for
     libusb and libftdi.
   * configure.ac: Use POSIX compliant tests for equality ("=", not "==").

2008-04-26  Kolja Waschk <kawk>

   * src/flash/amd.c: Separate Chip name by Manufacturer (Andrey F. Ilchuk)

2008-04-24  Mike Frysinger  <vapier@gentoo.org>

   * src/tap/usbconn/libusb.c (usbconn_libusb_connect): Use the
     usb_get_busses() function rather than the usb_busses global
     variable due to portability issues (like with libusb-win32).
   * src/jtag.c (jtag_readline_loop): [ 1950315 ] Fix quiting when
     using the non readline version.
   * configure.ac: [ 1950061 ] Look for the ChangeLog in $srcdir.

2008-04-19  Kolja Waschk <kawk>

   * src/tap/parport/ftd2xx.c: SetBaudRate to 3E6, not 48E6. Should
     fix [ 1925509 ] ftd2xx: SetBaudRate fails with FT245
   * src/flash/intel.c: Handle chips that support "Mitsubishi
     standard/enhanced command set" just like Intel chips. Need
     to do more research about the differences (if any) [1946559]
   * src/tap/cable/usbblaster.c: clock() at highest possible rate
     using the byte shift mode for n>=8 (Thanks M. Banditt)
   * include/cmd.h, src/cmd/cmd.c, src/jtag.c: [ 1946331 ] command
     completion support (by Mike Frysinger)
   * configure.ac, acinclude.m4: [ 1946114 ] make AC_PROG_SED
     workaround sane (Mike Frysinger)
   * include/jtag.h, src/cmd/detect.c, src/tap/detect.c:
     [ 1946119 ] fixup relocatable jtag in detection (M.Frysinger)
   * src/cmd/frequency.c: ensure that cable is initialized. Fixes
     [ 1933736 ] "frequency" command segfaults without args

2008-04-19  Arnim Laeuger  <arniml>

   * src/bsdl/Makefile.am, src/svf/Makefile.am: ensure that
     bsdl_bison.h is generated prior to compiling bsdl_flex.c and
     bsdl_bison.c
     [ 1943435 ] fixup bsdl parallel build issue (part2)

2008-04-13  Kolja Waschk <kawk>

  * src/tap/parport/ftd2xx.c, src/tap/usbconn/libusb.c, src/lib/fclock.c,
    src/jtag.c, src/flash/amd_flash.c, src/flash/amd.c, src/flash/jedec.c,
    src/svf/svf.c, configure.ac, doc/UrJTAG.txt: Provide variants of
    usleep, frealtime, mkdir for [ 1838732 ] EXE built with MinGW

2008-04-11  Kolja Waschk <kawk>

   * src/bsdl/bsdl.c, src/tap/parport/ftd2xx.c, src/tap/parport/ftdi.c,
     src/tap/usbconn/libusb.c, src/lib/fclock.c, src/jtag.c:
     [ 1940323 ] OS X support for UrJTAG (by Ville Voipio)

2008-04-11  Arnim Laeuger  <arniml>

   * src/tap/parport/ftdi.c (ftdi_flush_output): removed unused variables

2008-04-11  Jie Zhang  <jie.zhang@analog.com>

   From Michael Hennerich <michael.hennerich@analog.com>
   * src/tap/parport/ftdi.c (ftdi_generic_open): Detect
     BFIN-UJTAG cable.
   * src/tap/cable.c (ft2232_bfin_ujtag_cable_driver): Declare.
     (cable_drivers): Add ft2232_bfin_ujtag_cable_driver.
   * src/tap/cable/ft2232.c (BIT_BFIN_UJTAG_nTRST,
     BIT_BFIN_UJTAG_nLED, BITMASK_BFIN_UJTAG_nTRST,
     BITMASK_BFIN_UJTAG_nLED): Define.
     (ft2232_bfin_ujtag_init): New.
     (ft2232_bfin_ujtag_done): New.
     (ft2232_bfin_ujtag_cable_driver): Define.

2008-04-10  Jie Zhang  <jie.zhang@analog.com>

   * src/flash/flash.c (flashmem): Show the address when verifying.
     Show the end address when program and verify complete.

2008-04-10  Jie Zhang  <jie.zhang@analog.com>

   From Stefan Pledl  <stefan.pledl@mesutronic.de>
   * src/bsdl2jtag.c (endline): Set mode to 0 for INSTRUCTION_LENGTH
     and BOUNDARY_LENGTH attributes.
   * data/atmel/atf15xx/STEPPINGS: New file.
   * data/atmel/atf15xx/atf1504asv: New file.
   * data/atmel/PARTS: Add atf15xx.
   * data/Makefile.am (nobase_dist_pkgdata_DATA): Add
     atmel/atf15xx/STEPPINGS and atmel/atf15xx/atf1504asv.

2008-04-09  Jie Zhang  <jie.zhang@analog.com>

   * src/bus/bf537_stamp.c (bf537_stamp_bus_new_1): Renamed
     from bf537_stamp_bus_new, but don't set driver.
     (bf537_stamp_bus_new): Call bf537_stamp_bus_new_1 and
       set driver here.
     (bf537_ezkit_bus_new): Likewise.
     (bf527_ezkit_bus_new): Likewise.
     (bf537_ezkit_bus): Replace bf537_stamp_bus_new with
       bf537_ezkit_bus_new.
     (bf527_ezkit_bus_printinfo): New.
     (bf527_ezkit_bus): Define.
   * src/bus/buses.c (bus_drivers[]): Add bf527_ezkit_bus.
   * src/bus/buses.h (bf527_ezkit_bus): Declare.
   * src/bus/Makefile.am (libbus_a_SOURCES): Add bf537_stamp.c
     if ENABLE_BUS_BF527_EZKIT. Allow ENABLE_BUS_BF537_EZKIT
     independent on ENABLE_BUS_BF537_STAMP.
   * configure.ac: Add bf527_ezkit.
   * data/Makefile.am (nobase_dist_pkgdata_DATA): Add
     analog/bf527c/STEPPINGS and analog/bf527c/bf527c.
   * data/analog/bf527c/bf527c: New file.
   * data/analog/bf527c/STEPPINGS: New file.
   * data/analog/PARTS: Add bf527c.

2008-04-09  Michael Hennerich <michael.hennerich@analog.com>

   * data/analog/bf537/STEPPINGS: Add stepping 3.

2008-04-08  Arnim Laeuger  <arniml>

   * src/bsdl/bsdl_flex.l (bsdl_flex_deinit): close file if still open

2008-04-08  Kolja Waschk <kawk>

   * src/cmd/idcode.c: [ 1936543 ] Check for set-up cable in idcode (U.Bonnes)

2008-04-05  Kolja Waschk <kawk>

   * src/tap/cable/usbblaster.c: [ 1934843 ] Fix for USBBLASTER (U.Bonnes)
   * src/jtag.c: [ 1933141 ] Don't add duplicate history lines (U.Bonnes)

2008-04-03  Kolja Waschk <kawk>

   * src/jtag.c: Optionally use JTAG_PROMPT environment setting for
     prompt instead of "jtag>" (by Mike Frysinger)

   * include/jtag.h, src/cmd/jtag_data_dir.c, src/cmd/include.c,
     src/cmd/Makefile.am, src/bsdl/Makefile.am, src/bsdl/bsdl_flex.l,
     src/lib/make-relative-prefix.c, src/lib/safe-ctype.h,
     src/lib/lbasename.c, src/lib/Makefile.am, src/lib/filenames.h,
     src/lib/lrealpath.c, src/jtag.c, configure.ac:
     [ 1916428 ] support runtime-relocatable urjtag (by Mike Frysinger)

   * include/jtag.h, src/cmd/cmd.c, src/cmd/idcode.c, src/cmd/Makefile.am,
     src/tap/parport/ftdi.c, src/tap/idcode.c, src/tap/Makefile.am, THANKS:
     [ 1933730 ] new "idcode" command (by Uwe Bonnes)

2008-04-03  Arnim Laeuger  <arniml>

   [ 1929235 ] Use less global and static variables:
   * src/bus/jopcyc.c, src/bus/zefant-xs3.c: made global variable
     last_address local
   * src/svf/svf.c, src/svf/svf.h: support reentrant parser and scanner
   * src/svf/svf_bison.y: provisions for reentrant parser
   * src/svf/svf_flex.l: made scanner reentrant
   * src/svf/Makefile.am: removed command line options for
     bison and flex
   * configure.ac: require flex 2.5.33 also for SVF scanner
   * doc/UrJTAG.txt: document flex version for SVF scanner

2008-04-02  Arnim Laeuger  <arniml>

   [ 1929235 ] Use less global and static variables:
   * src/bsdl/bsdl.c, src/cmd/bsdl.c: use globals from chain_t
   * src/tap/chain.c (chain_alloc): init BSDL globals
   * include/chain.h: added bsdl_globs_t to chain_t
   * include/bsdl.h: defined structure for BSDL globals
   * src/bsdl/Makefile.am, src/bsdl/bsdl_sem.c, src/bsdl/bsdl_flex.l,
     src/bsdl/bsdl_bison.y, src/bsdl/bsdl.c, src/bsdl/bsdl_local.h:
       renamed bsdl.h to bsdl_local.h

2008-04-01  Arnim Laeuger  <arniml>

   [ 1887221 ] Add configure switch to disable all cable&parport drivers:
   * doc/UrJTAG.txt: updates for new options and summary reporting
   * src/tap/parport.c: reworked driver referencing based on
     ENABLE_PARPORT_* macros
   * src/tap/cable.c: reworked driver referencing based on
     ENABLE_CABLE_* macros
   * src/tap/Makefile.am (libtap_a_SOURCES): include sources based on
     ENABLE_CABLE_* and ENABLE_PARPORT_* macros
   * src/bus/buses.c: reference bus drivers based on ENABLE_BUS_* macros
   * src/bus/buses.h: sorted sequence of extern declarations
   * src/bus/Makefile.am (libbus_a_SOURCES): include sources based on
     ENABLE_BUS_* macros
   * src/Makefile.am (jtag_LDADD): moved -lcmd to top of list to prevent
     linker error for --enable-cable=jim
   * configure.ac: added switches --enable-bus, --enable-cable and enable-parport
     removed (superseeded) --enable-jim and --enable-ep9307

2008-03-26  Kolja Waschk <kawk>

   * src/flash/amd.c: Fix address shift (Jeff Wittrock)

2008-03-15  Jie Zhang  <jie.zhang@analog.com>

   * include/jtag.h (jtag_parse_line): Declare.
     (jtag_parse_stream): Declare.
   * src/discovery.c: Move ...
   * src/tap/discovery.c: ... here.
   * src/detect.c: Move ...
   * src/tap/detect.c: ... here.
   * src/tap/Makefile.am (libtap_a_SOURCES): Add detect.c and
       discovery.c.
   * src/readmem.c: Move ...
   * src/bus/readmem.c: ... here.
   * src/writemem.c: Move ...
   * src/bus/writemem.c: ... here.
   * src/bus/Makefile.am (libbus_a_SOURCES): Add readmem.c and
       writemem.c.
   * src/flash.c: Move ...
   * src/flash/flash.c: ... here.
   * src/flash/Makefile.am (libflash_a_SOURCES): Add flash.c.
   * src/jtag.c (get_token, jtag_parse_line, jtag_parse_stream,
     jtag_parse_file): Move to ...
   * src/cmd/parse.c: ... here.
   * src/cmd/Makefile.am (libbus_a_SOURCES): Add parse.c.
   * src/Makefile.am (jtag_SOURCES): Remove detect.c, discovery.c,
       readmem.c, writemem.c and flash.c.
     (jtag_LDADD): Add -ltap and -lflash one more time to resolve
       undefined references.

   * po/POTFILES.in: Update according to the changes above.
   * po/fr.po, po/rw.po, po/sk.po: Update.

2008-03-14  Arnim Laeuger  <arniml>

   * configure.ac: format AC_ARG_ENABLE help with AS_HELP_STRING macro

2008-03-13  Kolja Waschk <kawk>

   * po/POTFILES.in: Sorted and updated to fix [1904952] Missing xpcu_pp.c
       prevents "make urjtag.pot-update"
   * po/fr.po, po/rw.po, po/sk.po: Updated

2008-03-10  Arnim Laeuger  <arniml>

   [ 1911429 ] Read TDO data from instruction shift:
   * doc/UrJTAG.txt: removed note about SIR deficiency
   * src/svf/svf.c (svf_sxr): request TDO capture for SIR when command specifies TDO paramters
   * src/tap/chain.c (chain_shift_instructions_mode): use defered shifting and capture TDO
       output when requested
   * src/part/instruction.c (instruction_alloc): allocate tap_register out
   * include/chain.h: parameter capture_output added to chain_shift_instructions_mode()
   * include/instruction.h: tap_register out added

2008-03-03  Arnim Laeuger  <arniml>

   * src/tap/parport/ftd2xx.c (ftd2xx_mpsse_open): fix FT_SetChar() parameters
   * doc/UrJTAG.txt: fix some typos

2008-03-01  Arnim  <arniml>

   * src/tap/parport/ftdi.c (ftdi_mpsse_open): rework sequence to fix
       a system that shows similar hangs as reported in
       [ 1904970 ] JTAG operations hang with libftdi
   * src/tap/parport/ftd2xx.c (ftd2xx_mpsse_open): align with ftdi.c

2008-03-01  Kolja Waschk <kawk>

   * src/tap/cable/jlink.c: Added VREF detection and a call to usb_reset()
      when cable initialization failed
   * src/tap/cable/xpc.c: Implemented much faster access method using GPIF
      transfers via vendor request 0xA6. Reportedly works with DLC9 now.

2008-02-28  Kolja Waschk <kawk>

   * doc/UrJTAG.txt: Concretized list of supported USB cables.
   * src/detect.c: Use "include" internally instead of "script", avoid errmsg

2008-02-27  Kolja Waschk <kawk>

   * src/tap/cable/generic.c (generic_flush_one_by_one): Always flush,
       don't let the queue grow unnecessarily.

2008-02-27  Jie Zhang  <jie.zhang@analog.com>

   * include/bus.h: Don't include chain.h.
   * include/svf.h: Include chain.h.
     (svf_run): Add a parameter to pass chain.
   * include/cmd.h: Include chain.h.
     (cmd_t): Add a parameter to pass chain for run.
     (cmd_run, cmd_test_cable): Add a parameter to pass chain.
   * include/bus_driver.h: Include chain.h.
     (struct bus_driver): Add a parameter to pass chain for new_bus.
   * include/bsdl.h: Include chain.h
     (bsdl_read_file, bsdl_scan_files): Add a parameter to pass chain.
   * include/jtag.h (chain): Don't declare.
     (jtag_parse_file): Add a parameter to pass chain.
   * src/bsdl/bsdl.c (bsdl_read_file): Add a parameter to pass chain.
       Initialize parser_priv->jtag_ctrl.chain.
     (bsdl_scan_files): Add a parameter to pass chain.
   * src/bsdl/bsdl_sem.c (bsdl_set_instruction_length): Call cmd_run
       with priv->jtag_ctrl.chain.
   * src/bsdl/bsdl.h (struct jtag_ctrl): Add chain field.
   * src/detect.c (detect_parts): Pass chain to bsdl_scan_files
       and cmd_run.
   * src/bus/bf548_ezkit.c (bf548_ezkit_bus_new): Add a parameter to
       pass chain.
   * src/bus/fjmem.c (fjmem_bus_new): Likewise.
   * src/bus/ppc405ep.c (ppc405ep_bus_new): Likewise.
   * src/bus/sh7727.c (sh7727_bus_new): Likewise.
   * src/bus/prototype.c (prototype_bus_new): Likewise.
   * src/bus/sa1110.c (sa1110_bus_new): Likewise.
   * src/bus/ppc440gx_ebc8.c (ppc440gx_ebc8_bus_new): Likewise.
   * src/bus/tx4925.c (tx4925_bus_new): Likewise.
   * src/bus/sh7750r.c (sh7750r_bus_new): Likewise.
   * src/bus/pxa2x0.c (pxa2x0_bus_new): Likewise.
     (pxa27x_bus_new): Likewise.
   * src/bus/bf533_stamp.c (bf533_stamp_bus_new): Likewise.
   * src/bus/bf533_ezkit.c (bf533_ezkit_bus_new): Likewise.
   * src/bus/bf537_stamp.c (bf537_stamp_bus_new): Likewise.
   * src/bus/ixp425.c (ixp425_bus_new): Likewise.
   * src/bus/h7202.c (h7202_bus_new): Likewise.
   * src/bus/zefant-xs3.c (zefant_xs3_bus_new): Likewise.
   * src/bus/bcm1250.c (bcm1250_bus_new): Likewise.
   * src/bus/sharc21065l.c (sharc_21065L_bus_new): Likewise.
   * src/bus/au1500.c (au1500_bus_new): Likewise.
   * src/bus/lh7a400.c (lh7a400_bus_new): Likewise.
   * src/bus/sh7751r.c (sh7751r_bus_new): Likewise.
   * src/bus/mpc5200.c (mpc5200_bus_new): Likewise.
   * src/bus/jopcyc.c (jopcyc_bus_new): Likewise.
   * src/bus/slsup3.c (slsup3_bus_new): Likewise.
   * src/bus/bf561_ezkit.c (bf561_ezkit_bus_new): Likewise.
   * src/bus/s3c4510x.c (s3c4510_bus_new): Likewise.
   * src/bus/ejtag.c (ejtag_bus_new): Likewise.
   * src/bus/mpc824x.c (mpc824x_bus_new): Likewise.
     (mpc824x_bus_write): Change chain to CHAIN.
   * src/svf/svf.c (yyparse): Add a parameter to pass chain. And update
       all call sites.
     (svf_force_reset_state): Likewise.
     (svf_goto_state): Likewise.
     (svf_frequency): Likewise.
     (svf_runtest): Likewise.
     (svf_state): Likewise.
     (svf_sxr): Likewise.
     (svf_trst): Likewsie.
     (svf_run): Likewise.
   * src/svf/svf_bison.y (yyerror): Update declaration and call sites.
     (chain): %parse-param.
   * src/svf/svf.h: Include chain.h and update function declarations.
   * src/cmd/endian.c (cmd_endian_run): Add a parameter to pass chain.
       And update all call sites.
   * src/cmd/frequency.c (cmd_frequency_run): Likewise.
   * src/cmd/part.c (cmd_part_run): Likewise.
   * src/cmd/salias.c (cmd_salias_run): Likewise.
   * src/cmd/instruction.c (cmd_instruction_run): Likewise.
   * src/cmd/quit.c (cmd_quit_run): Likewise.
   * src/cmd/register.c (cmd_register_run): Likewise.
   * src/cmd/debug.c (cmd_debug_run): Likewise.
   * src/cmd/flashmem.c (cmd_flashmem_run): Likewise.
   * src/cmd/svf.c (cmd_svf_run): Likewise.
   * src/cmd/peekpoke.c (cmd_peek_run): Likewise.
     (cmd_poke_run): Likewise.
   * src/cmd/cmd.c (cmd_test_cable): Likewise.
     (cmd_run): Likewise.
   * src/cmd/dr.c (cmd_dr_run): Likewise.
   * src/cmd/cable.c (cmd_cable_run): Likewise.
   * src/cmd/shell.c (cmd_shell_run): Likewise.
   * src/cmd/discovery.c (cmd_discovery_run): Likewise.
   * src/cmd/detect.c (cmd_detect_run): Likewise.
   * src/cmd/readmem.c (cmd_readmem_run): Likewise.
   * src/cmd/signal.c (cmd_signal_run): Likewise.
   * src/cmd/shift.c (cmd_shift_run): Likewise.
   * src/cmd/initbus.c (cmd_initbus_run): Likewise.
   * src/cmd/eraseflash.c (cmd_eraseflash_run): Likewise.
   * src/cmd/bit.c (cmd_bit_run): Likewise.
   * src/cmd/get.c (cmd_get_run): Likewise.
   * src/cmd/test.c (cmd_test_run): Likewise.
   * src/cmd/reset.c (cmd_reset_run): Likewise.
   * src/cmd/include.c (cmd_include_or_script_run): Likewise.
     (cmd_include_run): Likewise.
     (cmd_script_run): Likewise.
   * src/cmd/bsdl.c (cmd_bsdl_run): Likewise.
   * src/cmd/scan.c (cmd_scan_run): Likewise.
   * src/cmd/detectflash.c (cmd_detectflash_run): Likewise.
   * src/cmd/help.c (cmd_help_run): Likewise.
   * src/cmd/writemem.c (cmd_writemem_run): Likewise.
   * src/cmd/bus.c (cmd_bus_run): Likewise.
   * src/cmd/set.c (cmd_set_run): Likewise.
   * src/cmd/print.c (cmd_print_run): Likewise.
   * src/jtag.c (chain): Don't define.
     (jtag_parse_line): Add a parameter to pass chain.
       And update all call sites.
     (jtag_readline_multiple_commands_support): Likewise.
     (jtag_readline_loop): Likewise.
     (jtag_parse_stream): Likewise.
     (jtag_parse_file): Likewise.
     (jtag_parse_rc): Likewise.
     (cleanup): Likewise.
     (main): Define a local chain.

2008-02-26  Arnim Laeuger  <arniml>

   * src/tap/cable/ft2232.c (send_and_receive): loopback_off moved to ftdi.c/ftd2xx.c
   * src/tap/parport/ftd2xx.c (ftd2xx_mpsse_open): set TCK, loopback_off, reset, purge
   * src/tap/parport/ftdi.c (ftdi_mpsse_open): set TCK, loopback_off, reset, purge

2008-02-24  Mike Frysinger  <vapier>

   * src/jtag.c: allow people to disable startup message (1901877),
       quit upon EOF (1901880)

2008-02-25  Arnim Laeuger  <arniml>

   * src/bus/fjmem.c (fjmem_bus_new): accept 'len' parameter to suppress
       data register length detection

2008-02-25  Kolja Waschk <kawk>

   * include/usbconn/libusb.h, src/tap/cable/jlink.c: J-Link driver
       doesn't use global variables anymore

2008-02-25  Jie Zhang  <jie.zhang@analog.com>

   * src/bus/buses.c (bus_drivers): bf548_ezkit_bus.
   * src/bus/buses.h: Declare bf548_ezkit_bus.

   * include/flash/cfi.h (MAJOR_VERSION_OFFSET): New macro.
     (MAJOR_VERSION_OFFSET): New macro.
     (MINOR_VERSION_OFFSET): New macro.
     (ADDRESS_SENSITIVE_UNLOCK_OFFSET): New macro.
     (ERASE_SUSPEND_OFFSET): New macro.
     (SECTOR_PROTECT_OFFSET): New macro.
     (SECTOR_TEMPORARY_UNPROTECT_OFFSET): New macro.
     (SECTOR_PROTECT_SCHEME_OFFSET): New macro.
     (SIMULTANEOUS_OPERATION_OFFSET): New macro.
     (BURST_MODE_TYPE_OFFSET): New macro.
     (PAGE_MODE_TYPE_OFFSET): New macro.
     (ACC_MIN_OFFSET): New macro.
     (ACC_MAX_OFFSET): New macro.
     (TOP_BOTTOM_SECTOR_FLAG_OFFSET): New macro.
     (PROGRAM_SUSPEND_OFFSET): New macro.
     (UNLOCK_BYPASS_OFFSET): New macro.
     (SECSI_SECTOR_SIZE_OFFSET): New macro.
     (EMBEDDED_HWRST_TIMEOUT_MAX_OFFSET): New macro.
     (NON_EMBEDDED_HWRST_TIMEOUT_MAX_OFFSET): New macro.
     (ERASE_SUSPEND_TIMEOUT_MAX_OFFSET): New macro.
     (PROGRAM_SUSPEND_TIMEOUT_MAX_OFFSET): New macro.
     (BANK_ORGANIZATION_OFFSET): New macro.
     (BANK_REGION_INFO_OFFSET): New macro.
     (struct amd_pri_extened_query_structure): Define.
     (amd_pri_extened_query_structure_t): Typedef.
   * src/flash/cfi.c (cfi_array_free): Free primary vendor table.
     (cfi_detect): Detect AMD CFI primary vendor-specific extended
     query table. Reverse the order of erase block region information
     for top boot devices.
   * src/flash/detectflash.c (detectflash): Print out information
     of AMD CFI primary vendor-specific extended query table.

2008-02-24  Kolja Waschk <kawk>

   * include/cable.h, include/usbconn.h, include/usbconn/libusb.h,
     src/tap/cable.c, src/tap/usbconn/libusb.c, src/tap/parport.c,
     src/tap/usbconn.c, src/tap/Makefile.am: Merged code from usb_abstraction
       branch, adding a "usbconn" link driver (similar to the existing
       parport link driver) for USB cables.

   * src/tap/cable/generic_parport.c, src/tap/cable/generic_parport.h,
     src/tap/cable/generic_usbconn.h, src/tap/cable/generic_usbconn.c,
     src/tap/cable/generic.c, src/tap/cable/generic.h: Separated link-specific
       code from generic.c into addition source files for parport and usbconn

   * src/tap/cable/wiggler.c, src/tap/cable/arcom.c, src/tap/cable/mpcbdm.c,
     src/tap/cable/usbblaster.c, src/tap/cable/jlink.c, src/tap/cable/ea253.c,
     src/tap/cable/vision_ep9307.c, src/tap/cable/triton.c, src/tap/cable/ei012.c,
     src/tap/cable/byteblaster.c, src/tap/cable/wiggler2.c, src/tap/cable/dlc5.c,
     src/tap/cable/ft2232.c, src/tap/cable/keithkoep.c, src/tap/cable/lattice.c:
        Small modifications to adapt to the changes in cable.h and generic.h

   * src/tap/cable/xpc.c, src/tap/parport/xpcu_pp.c, src/tap/parport/xpcu_common.c:
     Xilinx Platform Cable USB driver now based on usbconn link driver

   * src/tap/cable/jlink.c: New driver for Segger J-Link, Atmel SAM-ICE etc.
       based on usbconn link driver

   * doc/UrJTAG.txt: Added section about link drivers

2008-02-24  Eugene Boldenkov <eugene_b>

   * src/bus/mpc824x.c: Add 32-bit bus support (1900847)

2008-02-24  Mike Frysinger  <vapier>

   * configure.ac: Fix building out of tree (1899908), only use libusb flags
       as needed (1899930), provide flag about wchar.h presence (1899922)
   * src/cmd/print.c: Fix dependency on wchar.h (1899922)

2008-02-23  Arnim Laeuger  <arniml>

   * extra/fjmem/README: new file
   * doc/UrJTAG.txt: mention fjmem driver, document bus driver internals
   * src/svf/Makefile.am (svf_flex.o svf.o): fix dependencies to svf_bison.h
   * src/bsdl/Makefile.am (bsdl_flex.o bsdl_sem.o): fix dependencies to bsdl_bison.h
    -> resolves [ 1899911 ]
   * src/tap/cable/ft2232.c (send_and_receive): only flush if not TO_OUTPUT
   * src/tap/chain.c (chain_shift_data_registers_mode): flush TO_OUTPUT instead
       of CONSERVATIVELY
   * src/tap/cable.c (cable_flush), include/cable.h (enum): removed CONSERVATIVELY
   * configure.ac: conservative-flush removed

2008-02-21  Arnim Laeuger  <arniml>

   * src/tap/parport/ftdi.c (ftdi_mpsse_open): set latency timer to 16ms
   * src/tap/parport/ftd2xx.c (ftd2xx_mpsse_open): set latency timer to 16ms
   * src/tap/cable/ft2232.c (send_and_receive): issue SEND_IMMEDIATE command
       when receive bytes were scheduled
   * src/bsdl/bsdl_bison.y, src/bsdl/bsdl.h, src/bsdl/bsdl_flex.l, src/bsdl/bsdl.c:
       push mode and debug through init tree to avoid error message from scanner
       in simple test mode.
   * src/bus/fjmem.c: merged branches/jmem to trunk
       -> added fjmem bus driver

2008-02-20  Arnim Laeuger  <arniml>

   * data/Makefile.am (nobase_dist_pkgdata_DATA): added bsdl/STD_1149_1_2001

2008-02-20  Kolja Waschk <kawk>

   Version 0.8 released.

2008-02-20  Kolja Waschk <kawk>

   * po/fr.po, po/sk.po, po/rw.po, POTFILES.in: Regenerated or updated

2008-02-19  Arnim Laeuger  <arniml>

   * src/bsdl/bsdl_flex.l (bsdl_flex_set_bin_x), src/bsdl/bsdl.h,
     src/bsdl/bsdl_bison.y (Init_Text): properly support COMPLIANCE_PATTERNS
     -> fix for [ 1896382 ]

2008-02-18  Arnim Laeuger  <arniml>

   * src/bsdl/bsdl.c, src/bsdl/bsdl_flex.l, src/bsdl/bsdl_bison.y,
     src/bsdl/bsdl.h, src/bsdl/bsdl_sem.c: support quiet scanning of files
       in include.c
   * src/cmd/include.c (cmd_include_run): check and read file if it's BSDL
       syntax -> [ 1895936 ]
   * doc/UrJTAG.txt: add note about BSDL support in 'include'

2008-02-18  Kolja Waschk <kawk>

   * doc/UrJTAG.txt: How to use initbus (and ejtag/prototype bus driver)
       and some other smaller updates in the "commands" section. Also
       added note about unsupported spiflash* commands, and about now
       obsolete script command (see below)
   * Merged src/script.c into src/include.c. The command looks for the
       specified file in the repository if it's neither an absolute path
       nor begins with ./ or ../, otherwise it uses the filename as is.
       When called as "script", the command behaves as before but emits
       a warning that "include" should be used in future.

2008-02-17  Arnim Laeuger  <arniml>

   * configure.ac: check for pre-generated src/svf/svf_flex.c
       -> second part of [ 1895353 ]
   * src/bsdl/Makefile.am (noinst_HEADERS): bsdl_sysdep.h added for proper
       release packing -> first part of [ 1895353 ]

2008-02-17  Kolja Waschk <kawk>

   * doc/UrJTAG.txt: How to use USB cables. THANKS: some additions
   * include/Makefile.am: Add jim.h and jim/some_cpu.h headers for distr.

2008-02-16  Arnim Laeuger  <arniml>

   * src/tap/cable/ft2232.c (ft2232_flush): fix inconsistency of TDO caching
        in ft2232_flush()
   * THANKS: to the original SVF and BSDL parser programmers
   * src/tap/cable/ft2232.c (ft2232_generic_init, ft2232_jtagkey_init, ft2232_armusbocd_init):
        initialize mpsse frequency via ft2232_set_frequency()

2008-02-16  Kolja Waschk <kawk>

    * src/jtag.c, src/tap/chain.c, include/chain.h: Always flush immediately
        after each command when used interactively
    * src/cmd/scan.c, src/cmd/Makefile.am, src/cmd/cmd.c: Implemented basic
        boundary "scan" command to detect changes on input pins; tested with
        an (completely erased) Actel ProASIC3 A3P125
    * src/svf/svf.c: Small fix for computation of run_count from min_time
    * doc/UrJTAG.txt: Updated doc about building with FTD2XX in Cygwin
    * src/tap/cable.c, include/cable.h, src/tap/cable/*.c (all drivers):
        moved cable_set_frequency functionality from cable.c to the cable
        drivers, to fix [ 1836319 ] Delay loop calibration takes ages
    * src/tap/cable.c: Include ftdi-based cable drivers if either libftdi or
        FTDI's FTD2XX (CDM) drivers are present (--with-ftd2xx)
    * src/flash/Makefile.am, src/flash/jedec_exp.c, src/flash/detectflash.c,
        configure.ac: Experimental new code for flash detection, to be enabled
        during configuration with --enable-jedec-exp (disabled by default)
    * src/bus/s3c4510x.c: disable debug output (was enabled in 929..), do a
        chain_shift_data_registers before trying to read b0size (fixes the
        old problem of B0SIZE unknown, needed for proper flash detection)
    * include/register.h, src/tap/register.c, src/discovery.c: report if tdo
        seems to be stuck during detect_register_size (ie. "detect").

2008-02-14  Arnim Laeuger  <arniml>

    * src/tap/cable.c (cable_flush), src/tap/chain.c (chain_shift_data_registers_mode),
        include/cable.h, configure.ac: follow conservative flush strategy for transfers
        without output capture (if not disabled via configure --disable-conservative-flush)

2008-02-14  Kolja Waschk <kawk>

    * src/tap/chain.c: Enabled the new^2 implementation in tap_shift_register
        (which was implemented 2008-02-03 but not proven (now it is...))

2008-02-14  Jie Zhang  <jie.zhang@analog.com>

    * src/bus/bf537_stamp.c: New.
    * src/bus/bf548_ezkit.c: New.
    * src/bus/bf561_ezkit.c: New.
    * src/bus/buses.c (bus_drivers): Add bf537_stamp_bus,
        bf537_ezkit_bus, and bf561_ezkit_bus.
    * src/bus/buses.h: Declare bf537_stamp_bus, bf537_ezkit_bus,
        and bf561_ezkit_bus.
    * src/bus/Makefile.am (libbus_a_SOURCES): Add bf537_stamp.c,
        bf548_ezkit.c, and bf561_ezkit.c.
    * data/analog/bf533/STEPPINGS: Add stepping 4.
    * data/analog/bf537/bf537: New.
    * data/analog/bf537/STEPPINGS: New.
    * data/analog/bf549/bf549: New.
    * data/analog/bf549/STEPPINGS: New.
    * data/analog/bf561/bf561: New.
    * data/analog/bf561/STEPPINGS: New.
    * data/analog/PARTS: Add bf537, bf549, and bf561.
    * data/Makefile.am (nobase_dist_pkgdata_DATA): Add
       analog/bf537/STEPPINGS, analog/bf537/bf537,
       analog/bf549/STEPPINGS, analog/bf549/bf549,
       and analog/bf561/STEPPINGS, analog/bf561/bf561.

2008-02-13  Arnim Laeuger  <arniml>

    * src/tap/cable/ft2232.c: implemented control of TRST
        second step of
        [ 1891845 ] Add support for TRST/SRST/LEDs to FT2232 cable driver

2008-02-12  Arnim Laeuger  <arniml>

    * src/tap/cable/ft2232.c: statically set GPIO high byte with product-specific values
        first step of
        [ 1891845 ] Add support for TRST/SRST/LEDs to FT2232 cable driver

2008-02-11  Arnim Laeuger  <arniml>

    * src/bsdl/bsdl_bison.y (Store_Text): removed function Make_String()
        the QUOTED_STRING is directly copied to buffer_for_switch
    * src/bsdl/bsdl.h: memeber String_Val of parser_priv obseleted

2008-02-10  Arnim Laeuger  <arniml>

    * src/tap/cable/ft2232.c (ft2232_generic_init, ft2232_jtagkey_init) 
    (ft2232_armusbocd_init, ft2232_transfer_schedule): store low byte value and direction
        information in param structure to enable "Set Data Bits Low Byte" commands in
        non pod-specific functions.

2008-02-10  Kolja Waschk <kawk>

    * acinclude.m4, configure.ac: Use local copy of AC_PROG_SED macro (renamed
        to ACI_PROG_SED) maintain compatibility with older autoconf; fixes
        [1890192] - autogen.sh fails on AC_PROG_SED
    * include/cable.h, src/tap/cable/usbblaster.c, src/tap/cable/generic.c,
        src/tap/cable/generic.h, src/tap/cable/ft2232.c, src/tap/cable.c,
        doc/UrJTAG.txt: Extended cable_flush() to take one extra argument
        regarding the amount of items to flush (see UrJTAG.txt for doc),
    * cable.c: possible fix and optional more verbose output (#ifdef VERBOSE)
        for tracking down 1884952 Internal error (queue full)

2008-02-09  Arnim Laeuger  <arniml>

    * src/tap/cable/ft2232.c (ft2232_transfer_schedule): ensure max number of bytes for
        a single byte operation
    * src/svf/svf.c (svf_sxr): avoid output capture in case TDO is not specified for SDR

2008-02-07  Kolja Waschk <kawk>

    * src/jtag.c, doc/jtag.1: Fix dropthrough to caller if -n was given
        (fixes [1887179] reported by A.Dyer), add command line option "-i"
        to run interactive mode even after executing commands from files

2008-02-07  Arnim Laeuger  <arniml>

    * src/tap/cable/ft2232.c (ft2232_connect): check parport driver setting
      and set maxrecv accordingly
      (send_and_receive): fix problem with send suspend detection
    * src/tap/parport/ftdi.c (ftdi_mpsse_open): decreased latency timer
      (ftdi_flush_output): return error code from ftdi_write_data
    * src/tap/parport/ftd2xx.c (ftd2xx_mpsse_open): decreased latency timer

2008-02-05  Arnim Laeuger  <arniml>

    * src/tap/cable/ft2232.c: massive rewrite to support deferred transfers
      initial version with clean queue handling

2008-02-05  Kolja Waschk <kawk>

    * src/tap/cable.c: cable_queue_add_item didn't always correct q->next_free,
         and a memory leak in cable_defer_transfer was fixed [1884952].

2008-02-04  Arnim Laeuger  <arniml>

    * src/tap/cable/ft2232.c (ft2232_flush): rework flush implementation to benefit from
      queued deferred transfers

2008-02-04  Kolja Waschk <kawk>

    * configure.ac, src/tap/parport/xpcu_common.c, src/tap/parport_xpcu_pp.c,
        doc/UrJTAG.txt: Minor fixes regarding bug [1875234] "Can't compile 
        UrJTAG with libusb on Cygwin"
    * src/svf/svf.c: define SA_ONESHOT SA_RESETHAND, fixes bug [1875235]
        (On older Cygwin, SA_ONESHOT isn't known)

2008-02-03  Kolja Waschk <kawk>

    * src/flash/amd.c: Not only bus width but also device geometry affects
        the address shift ([1869650] Improve flash detection and support)
    * src/tap/tap.c, src/tap/chain.c: Split tap_shift_register into two
        halves, one that queues transfers, another that picks up the results.
        ([1832990] Speed improvements for USB cables) esp. for long chains

2008-02-02  Arnim Laeuger  <arniml>

    * src/bsdl/bsdl.h, src/bsdl/bsdl_flex.l: convert filename to uppercase
    * src/bsdl/bsdl_sem.c (create_register): don't create a new register if it's already there
    * data/bsdl/STD_1149_1_2001: dummy file for 2001 standard added
    * src/cmd/print.c (cmd_print_run): accept longer data register name
    * include/data_register.h (MAXLEN_DATA_REGISTER): increased to 32 for some BSDL files
    * src/flash/amd.c (amdstatus): increase timeout count to address
      [ 1882111 ] Timeout in amdstatus() too small

2008-02-02  Kolja Waschk <kawk>

    * src/tap/cable.c: Automatically resize JTAG activity queue if necessary
    * doc/UrJTAG.txt: New section about current cable driver internals

2008-02-01  Arnim Laeuger  <arniml>

    * src/tap/parport/ftd2xx.c (ftd2xx_pre_connect): fix compiler warning
    * src/tap/cable/ft2232.c: cleanup
    (ft2232_usbcable_help): mention ftd2xx-mpsse in cable help

2008-02-01  Kolja Waschk <kawk>

    * include/cable.h, include/chain.h, src/tap/chain.c, src/tap/tap.c,
      src/tap/cable/wiggler.c, src/tap/cable/arcom.c, src/tap/cable/mpcbdm.c,
      src/tap/cable/usbblaster.c, src/tap/cable/generic.c,
      src/tap/cable/vision_ep9307.c, src/tap/cable/ea253.c,
      src/tap/cable/triton.c, src/tap/cable/jim.c, src/tap/cable/byteblaster.c,
      src/tap/cable/ei012.c, src/tap/cable/generic.h, src/tap/cable/ft2232.c,
      src/tap/cable/wiggler2.c, src/tap/cable/keithkoep.c,
      src/tap/cable/lattice.c, src/tap/cable/dlc5.c, src/tap/cable/xpc.c,
      src/tap/cable.c: New functions to queue "deferred" JTAG activity.
        New code in cable drivers to flush the activity queue, both generic
        (for parport-based and new drivers) and optimized implementations
        for FT2232-based cables (by Arnim Laeuger) and USB-Blaster (by me).
        Result is a vast speed improvement at least for FT2232; this
        implements [ 1832990 ] Speed improvements for USB cables

2008-01-30  Arnim Laeuger  <arniml>

    * src/tap/tap.c (tap_reset): set instructions of all parts to BYPASS, fix
      [ 1873260 ] Command 'reset' does not reset internal states
    * src/part/part.c (parts_set_instruction): catch NULL pointer

2008-01-25  Kolja Waschk <kawk>

    * include/jim.h, src/jim/tap.c, intel_28f800b3.c, Makefile.am,
      some_cpu.c: Code skeleton and alloc/free calls for actual parts
      connected to JIM's some_cpu

2008-01-24  Kolja Waschk <kawk>

    * tap/cable/ft2232.c, tap/parport/ftdi.c, tap/cable.c: added support
      for Amontec JTAGkey USB cable (submitted by Laurent Gauch - Amontec)

2008-01-22  Arnim Laeuger  <arniml>

    * src/bsdl/bsdl_flex.l, src/bsdl/bsdl_bison.y,
      data/bsdl/STD_1149_1_1990, data/bsdl/STD_1149_1_1994:
      update header with link to source

2008-01-21  Kolja Waschk <kawk>

    * New JTAG declarations for MPC5241 (from kurobox.com, enh. 1869671)

2008-01-21  Arnim Laeuger  <arniml>

    * src/bsdl/*: use gettext for message strings, removed trailing whitespace

2008-01-20  Arnim Laeuger  <arniml>

    * src/bsdl/bsdl_bison.y, src/bsdl/bsdl_sem.c, src/bsdl/bsdl.h:
      support multiple port names in one port definition
    * src/bsdl/bsdl_bison.y, src/bsdl/bsdl_sem.c, src/bsdl/bsdl.h:
      handle vectored ports correctly, part 1 of fix for
      [ 1875737 ] Syntax errors/Port index warning parsing ATMEL BSDL files
    * src/bsdl/bsdl_bison.y, src/bsdl/bsdl_sem.c, src/bsdl/bsdl_flex.l:
      support OBSERVE_ONLY attribute in cell description (like input attribute)
      part 2 of fix for
      [ 1875737 ] Syntax errors/Port index warning parsing ATMEL BSDL files

2008-01-20  Kolja Waschk <kawk>
 
    * src/jim/some_cpu.c, src/jim/some_cpu.bsd: Added BSDL file for some_cpu
    * src/jim/some_cpu.c, src/jim/some_cpu.bsd, README.jim: JIM can now be
      accessed using the prototype bus driver and displays the given address,
      data and enable signals; example script in README.jim
    * src_jim/tap.c: Fixed TDI shift-in

2008-01-19  Kolja Waschk <kawk>

    * ChangeLog: whitespace cosmetics
    * Makefile.am, configure.ac, jim/tap.c, jim/Makefile.am, jim/README.jim,
      tap/cable/jim.c, tap/cable.c, tap/Makefile.am, jim/some_cpu.c, 
      include/jim.h, include/jim/some_cpu.h: JTAG target simulator "JIM"
      and a "jim" cable driver to "connect" to it; detection already works.

2008-01-18  Arnim Laeuger  <arniml>

    * configure.ac: restructured the test logic for bison error locations and
      the BSDL subsystem [ 1873515 ] BSDL part doesn't compile under Cygwin

2008-01-18  Kolja Waschk   <kawk>

    * Moved the code from libbrux/ subdirectory into appropriate locations in
      our src/ subdirectory (Enhancement 1873220):

      libbrux/cmd/help.c                -> src/cmd/help.c
      libbrux/cmd/quit.c                -> src/cmd/quit.c
      libbrux/cmd/cmd.c + src/cmd.c     -> src/cmd/cmd.c
      libbrux/cmd/cmd_detectflash.c     -> src/cmd/detectflash.c
      libbrux/flash + Makefile.am       -> src/flash/

    * Merged the header files from openwince "include" package, which were 
      previously moved in inclow/, into our final include/ directory, omitting
      all the files that aren't actually used by UrJTAG (Enhancement 1873220):

      common.h                          -> n/a (use bitmask.h!)
      openwince.h (asm/C detection)     -> n/a (use #ifdef __ASSEMBLY__)
      openwince.h (bitmasks)            -> bitmask.h
      brux/cmd.h + cmd.h                -> cmd.h
      brux/cfi.h + brux/flash.h+flash.h -> flash.h
      brux/bus.h                        -> bus_driver.h
      std/mic.h                         -> flash/mic.h
      device/flash/cfi.h                -> flash/cfi.h
      device/flash/intel.h              -> flash/intel.h
      arm/pxa2x0/mc.h                   -> src/bus/pxa2x0_mc.h

2008-01-17  Kolja Waschk   <kawk>

    * UrJTAG.txt: Updates regarding Cygwin ioperm package and readline library
    * src/jtag.c: Without readline library, informative output often
       was printed after prompt, not before
    * src/bus/s3c4510x.c: Address alignment on A0..Ax lines changes dynamically
       with bus width

2008-01-16  Arnim Laeuger  <arniml>

    * src/bus/prototype.c (prototype_bus_new): properly calculate the address
       shift based on the current bus width

2008-01-15  Arnim Laeuger  <arniml>

    * src/bus/prototype.c (prototype_bus_new): parameter amode added

2008-01-11  Arnim Laeuger  <arniml>

    * src/bus/prototype.c: added

2008-01-09  Arnim Laeuger  <arniml>

    * src/bus/h7202.c (h7202_bus_new): API extension

2008-01-08  Arnim Laeuger  <arniml>

    * src/bus/prototype.c: new prototype bus driver (Detrick Martin)
    * src/bus/zefant-xs3.c (zefant_xs3_bus_new): API extension: cmd_params for new_bus()
    * src/bus/sharc21065l.c (sharc_21065L_bus_new): API extension
    * src/bus/jopcyc.c (jopcyc_bus_new): API extension
    * src/bus/tx4925.c (tx4925_bus_new): API extension
    * src/bus/slsup3.c (slsup3_bus_new): API extension
    * src/bus/sh7751r.c (sh7751r_bus_new): API extension
    * src/bus/sh7750r.c (sh7750r_bus_new): API extension
    * src/bus/sh7727.c (sh7727_bus_new): API extension
    * src/bus/s3c4510x.c (s3c4510_bus_new): API extension
    * src/bus/sa1110.c (sa1110_bus_new): API extension
    * src/bus/pxa2x0.c (pxa2x0_bus_new): API extension
    (pxa27x_bus_new): API extension
    * src/bus/ppc405ep.c (ppc405ep_bus_new): API extension
    * src/bus/ppc440gx_ebc8.c (ppc440gx_ebc8_bus_new): API extension
    * src/bus/mpc5200.c (mpc5200_bus_new): API extension
    * src/bus/mpc824x.c (mpc824x_bus_new): API extension
    * src/bus/lh7a400.c (lh7a400_bus_new): API extension
    * src/bus/ixp425.c (ixp425_bus_new): API extension
    * src/bus/bf533_ezkit.c (bf533_ezkit_bus_new): API extension
    * src/bus/bf533_stamp.c (bf533_stamp_bus_new): API extension
    * src/bus/ejtag.c (ejtag_bus_new): API extension
    * src/bus/bcm1250.c (bcm1250_bus_new): API extension
    * src/bus/au1500.c (au1500_bus_new): API extension
    * src/bus/Makefile.am (libbus_a_SOURCES): added prototype.c
    * src/bus/buses.c: added prototype_bus (Detrick Martin)
    * src/cmd/initbus.c (cmd_initbus_run): hand down command parameters to bus_new()

2008-01-06  Arnim Laeuger  <arniml>

    * src/tap/cable/wiggler.c (wiggler_connect): enable bit<->pin mapping from parameter string
    * src/tap/cable/wiggler.c: make std_wgl_map static

2007-12-31  Arnim Laeuger <arniml>

    * src/bsdl/Makefile.am (noinst_HEADERS): move headers to noinst_HEADERS
    * include/Makefile.am (noinst_HEADERS): add bsdl.h to list of headers
    * src/bsdl/Makefile.am (libbsdl_a_SOURCES): add bsdl.h to list of sources

2007-12-30  Arnim Laeuger  <arniml>

    * src/detect.c (detect_parts): call bsdl_scan_file() if configure result indicates inclusion of BSDL subsystem
    * src/cmd/cmd.c: include cmd_svf and cmd_bsdl based on configure result
    * src/Makefile.am (jtag_DEPENDENCIES): link to libsvf.a and libbsdl.a based on configure result
    * src/cmd/Makefile.am (libcmd_a_SOURCES): compile svf.c and bsdl.c based on configure result
    * configure.ac: added --enable-svf and --enable-bsdl
    * README.svf: contents moved to doc/UrJTAG.txt, file deleted
    * data/Makefile.am (nobase_dist_pkgdata_DATA): fixed merge results
    * many files: integration of BSDL parser
    * data/xilinx/PARTS: added xc2v80-fg256,xc2v250-fg256,xc2v1000-fg256
      '[ 1859678 ] jtag support for xilinx xc2v80-fg256, xc2v250, xc2v1000 FPGA' (Alexander Didebulidze)
    * data/altera/ep1c12/ep1c12: CLAMP and HIGHZ instructions activated

2007-12-29  Arnim Laeuger  <arniml>

    * data/altera/PARTS: ep2c8 added
      '[ 1859032 ] jtag support for Altera EP2C8' (Hartley Sweeten)
    * data/Makefile.am (nobase_dist_pkgdata_DATA): ep2c8 files added
      '[ 1859032 ] jtag support for Altera EP2C8' (Hartley Sweeten)

2007-12-27  Arnim Laeuger  <arniml>

    * src/cmd/print.c (cmd_print_run): applied patch:
      '[ 1858985 ] possible fix to print the signal aliases' (Hartley Sweeten)

2007-12-26  Kolja Waschk <kawk>

    * tap/cable/vision_ep9307.c, tap/cable.c, tap/Makefile.am, configure.ac:
      Integrated first modern (single-file w/o parport) cable driver
      (1858709: EP9307 target specific cable driver, from Hartley Sweeten)

2007-12-23  Kolja Waschk <kawk>

    Version 0.7 released.

2007-12-23  Kolja Waschk <kawk>

    * NEWS: Summarized changes since fork from openwince CVS.
    * configure.ac: Updated copyright information.

2007-12-19  Kolja Waschk <kawk>

    * tap/cable/*, tap/parport/xpcu_common.c, cmd/part.c, cmd/cable.c,
      bus/pxa2x0.c, jtag.c: fix prototypes, include stdlib (thx Hartley)
    * src/cmd/print.c: cast uint64_t to (long long unsigned) for %llu

2007-12-18  Kolja Waschk <kawk

    * configure.ac, src/tap/parport/*.c: include stropts.h only if
      it's available (needed for uClinux and others; thanks Hartley)
    * doc/UrJTAG.txt, src/jtag.txt: Cosmetics, Copyright
    * src/tap/Makefile.am: include cable driver for USB Blaster and
      FT2232-based cables if any of libftdi or ftd2xx is present

2007-12-16  Kolja Waschk <kawk>

    * jtag.c: Don't abort on invalid command line options
    * configure.ac: Reorganized the libusb/libftdi detection.
    * data/MANUFACTURERS: Change 11110000111 code to point to
      "ARM" instead of Sharp to stop misdetection of other 
      (non-Sharp) chips which use ARM cores. See Bug 1837991.
    * libbrux/amd/amd_flash.c: Fix for [1851777] segfault when
      running detectflash
    * include/setdevice.h, include/Makefile.am, src/detect.c,
      src/cmd/setdevice.c, src/cmd/cmd.c, src/cmd/Makefile.am,
      src/jtag.c, doc/UrJTAG.txt, libbrux/flash/amd_flash.c,
      libbrux/setdevice.h, libbrux/Makefile.am: Removed code for
      "setdevice" command and added some documentation how to get
      along without it.

2007-12-15  Kolja Waschk <kawk>

    * configure.ac, tap/parport/parport.c, tap/parport/ppi.c,
      tap/parport/direct.c: Adapted openwince patch by Daniel
      O'Connor, [1235990] Add support for FreeBSD's ppi interface
      (closes our copy of that tracker item, 1829585)
    * src/cmd/cable.c, include/cable.h, src/tap/cable/*.c: Add
      help function to every cable; temporarily allow old syntax
      for cable command when used for parallel port cables
    * data/intel/pxa270/STEPPINGS, src/bus/pxa2x0.c: Integrated two
      patches from F. Rysanek, adding C5 stepping of PXA270 and a few
      few functions that resolve the PXA270 address space into the 6 
      default nCS windows per 64MB. (Enhancement req. 1849493)
    * cmd/part.c, cmd/setdevice.c, cmd/instruction.c, cmd/svf.c,
      cmd/dr.c, cmd/initbus.c, cmd/test.c, part/part.c, libbrux/cmd/cmd.c,
      libbrux/cmd/help.c: Make command string comparisons case-insensitive
      (fixes 1845811 "Case sensitivity in shell")

2007-12-14  Kolja Waschk <kawk>

    * README, doc/UrJTAG.txt: pointer to http://www.urjtag.org
    * configure.ac, src/Makefile.am, src/tap/parport/ftd2xx.c:
      Changes to allow linking against FTDI FTD2XX in Cygwin, initial
      support for --with-(libftdi|libusb|ftd2xx) configure options

2007-12-13  Kolja Waschk <kawk>

    * configure.ac: Run "svn info" with "-R" to get latest revision

2007-12-12  Arnim Laeuger  <arniml>

    * data/Makefile.am (nobase_dist_pkgdata_DATA): add missing '\', fixes
      [ 1849477 ] Missing \ in data/Makefile.ac

2007-12-09  Kolja Waschk <kawk>

    * configure.ac: Improve detection of flex version, get Subversion
      revision from 1. svn info, or 2. ChangeLog, or 3. Revision tag, 
      auto-detect whether -lrt is needed
    * src/svf/svf_flex.l: derive HAVE_MODERN_FLEX internally
    * src/jtag.c: show version from config.h, compile without readline
    * src/version.awk: not needed; SVN info now available in config.h
    * src/Makefile.am: removed -lrt link and version.h target
    * doc/UrJTAG.txt: Added info about libraries, ioperm, "setdevice" cmd

2007-12-08  Kolja Waschk <kawk>

    * include/Makefile.am, src/Makefile.am, src/svf/Makefile.am
      configure.ac, libbrux/configure.ac: Mention more files to
      ensure that dist tar.gz is complete; prevent installation
      of inclow/ headers during "make install" on top level

2007-12-07  Kolja Waschk <kawk>

    * README: All info moved to doc/UrJTAG.txt
    * README_21065L: Merged into doc/UrJTAG.txt
    * doc/UrJTAG.xml, UrJTAG.txt: converted DocBook to asciidoc
    * COPYING: GPLv2 added
    * AUTHORS: Updated
    * TODO: removed (we're using SourceForge trackers)

2007-12-06  Kolja Waschk <kawk>

    * ChangeLog: Import SVN commit messages from past month 
    * THANKS: Added all missing names (that I know of) of the people who
      contributed the patches that have been integrated in the past weeks

2007-12-05  Arnim Laeuger  <arniml>

    * src/jtag.c (main): Print build number based on version.h.
    * src/Makefile.am (version.h): Added rules to generate version.h from ChangeLog's revision tag.

2007-12-04 07:06  Kolja Waschk <kawk>

    * include/cable.h, include/parport.h, src/cmd/cable.c,
      src/tap/cable/generic.c, src/tap/cable/generic.h,
      src/tap/parport/direct.c, src/tap/parport/ftd2xx.c,
      src/tap/parport/ftdi.c, src/tap/parport/ppdev.c,
      src/tap/parport/xpcu_pp.c: [1839040] Make "cable" command less
      parport-centric. Changes "cable" command syntax!

2007-12-03 12:18  Kolja Waschk <kawk>

    * ChangeLog: added "Revision" keyword

2007-12-02 17:56  Kolja Waschk <kawk>

    * trunk/include, Makefile.am, configure.ac, inclow: openwince
      "include" package moved into "jtag" (now named "inclow")

2007-11-30 07:06  Kolja Waschk <kawk>

    * README: update fixes [1837364] Install instructions wrong

2007-11-28 22:42  Kolja Waschk <kawk>

    * doc/bsdl2jtag.1, doc/jtag.1: Imported man pages from
      openwince-jtag Debian package (w/permission from p2@debian)

2007-11-28 20:20  Kolja Waschk <kawk>

    * src/jtag.c: [ 1838018 ] "Forbid" to run JTAG tools with suid root

2007-11-28 19:43  Kolja Waschk <kawk>

    * src/jtag.c: [ 1839756 ] (openwince [972637]) add command line
      options to jtag

2007-11-28 00:13  Kolja Waschk <kawk>

    * doc/UrJTAG.xml: Integrated text from Wiki pages from Ralf,
      Incorporated README into UrJTAG.xml

2007-11-27 22:06  Kolja Waschk <kawk>

    * doc/UrJTAG.xml,doc-layout.txt: renamed top-level DocBook XML file

2007-11-27 22:05  Kolja Waschk <kawk>

    * doc/doc-layout.txt, doc/internals.xml: Include license text(s)
      and internals.xml

2007-11-27 21:01  Kolja Waschk <kawk>

    * doc/gpl.dbk, doc/lgpl.dbk: Use version 2, not 3

2007-11-27 20:56  Kolja Waschk <kawk>

    * doc/fdl.xml, doc/gpl.dbk, doc/lgpl.dbk: Added license texts
      (docbook) from www.gnu.org

2007-11-26 14:01  Kolja Waschk <kawk>

    * src/cmd/shell.c: Clean up fix for [1837985] "shell" command
      causes segfault

2007-11-25 22:49  Kolja Waschk <kawk>

    * doc/doc-layout.txt: Converted to DocBook-XSL

2007-11-25 14:45  Kolja Waschk <kawk>

    * doc/doc-layout.txt: Layout draft for new, comprehensive
      documentation...

2007-11-25 13:08  Kolja Waschk <kawk>

    * src/cmd/shell.c: Allow arbitrary number of arguments for "shell"
      command (fix for [1837985] "shell" command causes segfault)

2007-11-25 00:02  Arnim Laeuger  <arniml>

    * src/tap/parport/ftd2xx.c, src/tap/parport/ftdi.c: fix for '[
      1836616 ] Segfault/Memory corruption if USB device inaccessible'

2007-11-23 19:52  Arnim Laeuger  <arniml>

    * configure.ac, src/svf/Makefile.am, src/svf/svf_bison.y,
      src/svf/svf_flex.l: make SVF parser/lexer backwards compatible to
      pre-2.5.31 flex
      for those the error location feature is skipped in svf_flex.l

2007-11-20 20:35  Arnim Laeuger  <arniml>

    * configure.ac, src/cmd/cable.c, src/tap/Makefile.am,
      src/tap/cable/ft2232.c, src/tap/parport.c,
      src/tap/parport/ftd2xx.c, src/tap/parport/ftdi.c: ftd2xx parport
      driver added

2007-11-18 13:38  Arnim Laeuger  <arniml>

    * configure.ac: add some messages to show configuration summary, to
      be extended

2007-11-17 21:39  Arnim Laeuger  <arniml>

    * src/cmd/cable.c: report cable usage for USB & FTDI based cables
      only in case respective support is included

2007-11-16 17:50  Arnim Laeuger  <arniml>

    * include/cable.h, include/chain.h, src/cmd/cable.c, src/svf/svf.c,
      src/tap/Makefile.am, src/tap/cable.c, src/tap/cable/arcom.c,
      src/tap/cable/byteblaster.c, src/tap/cable/dlc5.c,
      src/tap/cable/ea253.c, src/tap/cable/ei012.c,
      src/tap/cable/ft2232.c, src/tap/cable/generic.c,
      src/tap/cable/keithkoep.c, src/tap/cable/lattice.c,
      src/tap/cable/mpcbdm.c, src/tap/cable/triton.c,
      src/tap/cable/usbblaster.c, src/tap/cable/wiggler.c,
      src/tap/cable/wiggler2.c, src/tap/cable/xpc.c, src/tap/chain.c,
      src/tap/parport.c, src/tap/parport/ftdi.c, src/tap/tap.c: merged
      changes from /branches/ft2232_eval@770
      this is the initial stable version of the ft2232 cable driver

2007-11-13 23:09  Arnim Laeuger  <arniml>

    * src/flash.c: removed obsolete declaration of amd_detect()

2007-11-13 08:07  Kolja Waschk <kawk>

    * configure.ac, src/tap/Makefile.am, src/tap/cable.c: Fix [ 1828368 ]
      Compilation fails without libusb/libftdi

2007-11-10 17:17  Kolja Waschk <kawk>

    * data/Makefile.am, data/lattice/PARTS,
      data/lattice/lc4128c-tqfp100,
      data/lattice/lc4128c-tqfp100/STEPPINGS,
      data/lattice/lc4128c-tqfp100/lc4128c-tqfp100: [ 1105256 ] jtag
      descriptor for Lattice LC4032V-TQFP100

2007-11-10 16:22  Arnim Laeuger  <arniml>

    * README.svf: remove links to openwince

2007-11-10 01:15  Arnim Laeuger  <arniml>

    * src/bus/Makefile.am, src/bus/buses.c, src/bus/buses.h,
      src/bus/zefant-xs3.c: added Zefant-XS3 bus

2007-11-10 00:31  Arnim Laeuger  <arniml>

    * data/xilinx/xc3s1000/fg320, data/xilinx/xc3s1000/fg456,
      data/xilinx/xc3s1000/fg676, data/xilinx/xc3s1000/ft256,
      data/xilinx/xc3s1000/xc3s1000: xc3s1000 kw

2007-11-10 00:15  Arnim Laeuger  <arniml>

    * data/Makefile.am, data/xilinx/xc3s1000/STEPPINGS,
      data/xilinx/xc3s1000/fg320, data/xilinx/xc3s1000/fg456,
      data/xilinx/xc3s1000/fg676, data/xilinx/xc3s1000/ft256,
      data/xilinx/xc3s1000/xc3s1000,
      data/xilinx/xc3s1000/xc3s1000_fg320,
      data/xilinx/xc3s1000/xc3s1000_fg456,
      data/xilinx/xc3s1000/xc3s1000_fg676,
      data/xilinx/xc3s1000/xc3s1000_ft256,
      data/xilinx/xc3s1000/xc3s1000l,
      data/xilinx/xc3s1000/xc3s1000l_fg320,
      data/xilinx/xc3s1000/xc3s1000l_fg456,
      data/xilinx/xc3s1000/xc3s1000l_fg676,
      data/xilinx/xc3s1000/xc3s1000l_ft256: unification xc3s1000

2007-11-09 22:44  Arnim Laeuger  <arniml>

    * src/cmd/bit.c: fixed [ 1828672 ] cmd/bit.c broken

2007-11-08 09:44  Kolja Waschk <kawk>

    * configure.ac, data/Makefile.am, data/xilinx/PARTS,
      data/xilinx/xc2c256-vq100, data/xilinx/xc2c256-vq100/STEPPINGS,
      data/xilinx/xc2c256-vq100/xc2c256-vq100,
      data/xilinx/xc2c64a-vq44, data/xilinx/xc2c64a-vq44/STEPPINGS,
      data/xilinx/xc2c64a-vq44/xc2c64a-vq44, include/Makefile.am,
      include/cable.h, include/xpcu.h, src/cmd/cable.c,
      src/part/data_register.c, src/tap/Makefile.am, src/tap/cable.c,
      src/tap/cable/arcom.c, src/tap/cable/byteblaster.c,
      src/tap/cable/dlc5.c, src/tap/cable/ea253.c,
      src/tap/cable/ei012.c, src/tap/cable/generic.c,
      src/tap/cable/generic.h, src/tap/cable/keithkoep.c,
      src/tap/cable/lattice.c, src/tap/cable/mpcbdm.c,
      src/tap/cable/triton.c, src/tap/cable/usbblaster.c,
      src/tap/cable/wiggler.c, src/tap/cable/wiggler2.c,
      src/tap/cable/xpc.c, src/tap/parport.c, src/tap/parport/ftdi.c,
      src/tap/parport/xpcu_common.c, src/tap/parport/xpcu_pp.c,
      src/tap/tap.c: [ 1479632, 1649637 ] Drivers for Altera USB
      Blaster and Xilinx Platform Cable USB

2007-11-08 09:13  Kolja Waschk <kawk>

    * include/Makefile.am, README, README_21065L, THANKS, 
      data/Makefile.am, data/analog/PARTS, data/analog/sharc21065l,
      data/analog/sharc21065l/STEPPINGS,
      data/analog/sharc21065l/sharc21065l, include/setdevice.h,
      libbrux/Makefile.am, libbrux/flash/amd_flash.c,
      libbrux/flash/detectflash.c, libbrux/setdevice.h,
      src/bus/Makefile.am, src/bus/buses.c, src/bus/buses.h,
      src/bus/sharc21065l.c, src/cmd/Makefile.am, src/cmd/cmd.c,
      src/cmd/setdevice.c, src/detect.c, src/flash.c, src/jtag.c: 
      [ 1605981 ] JTAG Support for ADSP-21065L Processor (with
      modifications) (Girish G Pai, Lesly A. M, Tony K Nadackal, Shaju Abraham)

2007-11-08 07:33  Kolja Waschk <kawk>

    * data/MANUFACTURERS, data/Makefile.am, data/admtek,
      data/admtek/adm5120, data/admtek/adm5120/adm5120, data/atheros,
      data/atheros/ar2312, data/atheros/ar2312/ar2312, data/brecis,
      data/brecis/PARTS, data/brecis/msp2006,
      data/brecis/msp2006/STEPPINGS, data/brecis/msp2006/msp2006,
      data/hitachi/PARTS, data/hitachi/ar7300,
      data/hitachi/ar7300/STEPPINGS, data/hitachi/ar7300/ar7300,
      data/lexra, data/lexra/PARTS, data/lexra/lx5280,
      data/lexra/lx5280/STEPPINGS, data/lexra/lx5280/lx5280,
      doc/README.ejtag: [ 1429825 ] EJTAG driver (new data files) (Oleg)

2007-11-08 07:11  Kolja Waschk <kawk>

    * src/bus/Makefile.am, src/bus/buses.c, src/bus/buses.h,
      src/bus/ejtag.c, src/tap/parport/ppdev.c: [ 1429825 ] EJTAG
      driver (partial patch - only the bus driver for now) (Oleg)

2007-11-07 23:17  Arnim Laeuger  <arniml>

    * src/bus/Makefile.am, src/bus/buses.c, src/bus/buses.h,
      src/bus/h7202.c: [ 1585617 ] support for the Magnachip h7202 cpu

2007-11-07 22:43  Arnim Laeuger  <arniml>

    * README.svf: update README.svf

2007-11-07 22:21  Arnim Laeuger  <arniml>

    * src/cmd/debug.c, src/cmd/eraseflash.c, src/cmd/peekpoke.c,
      src/cmd/script.c, src/cmd/shell.c, src/cmd/signal.c,
      src/cmd/test.c, src/detect.c, src/jtag.c, src/part/signal.c,
      src/readmem.c, src/svf/svf_bison.y, src/svf/svf_flex.l,
      src/writemem.c: get rid of (most) compiler warnings

2007-11-07 09:56  Kolja Waschk <kawk>

    * include/bssignal.h, include/jtag.h, include/part.h, src/jtag.c:
      Remaining diffs from gumstix repository: Add debug, test and
      shell command, aliases for parts, small fixes.

2007-11-07 09:44  Kolja Waschk <kawk>

    * src/bsdl2jtag.c, src/bus/ppc440gx_ebc8.c, src/cmd/Makefile.am,
      src/cmd/cmd.c, src/cmd/debug.c, src/cmd/part.c, src/cmd/print.c,
      src/cmd/script.c, src/cmd/shell.c, src/cmd/signal.c,
      src/cmd/test.c, src/detect.c, src/part/part.c, src/part/signal.c:
      Remaining diffs from gumstix repository: Add debug, test and
      shell command, aliases for parts, small fixes.

2007-11-07 09:09  Kolja Waschk <kawk>

    * doc/howto_add_support_for_more_flash.txt: [ 1460563 ] How to add
      Support more Flash chip???

2007-11-07 09:07  Kolja Waschk <kawk>

    * src/writemem.c: [ 1249554 ] Writemem command to write to SRAM
      (compile fix)

2007-11-07 09:04  Kolja Waschk <kawk>

    * src/svf/svf_flex.l: [ 1194137 ] better SVF diagnostics (compile
      fix)

2007-11-07 09:03  Kolja Waschk <kawk>

    * src/bus/ppc405ep.c, src/bus/Makefile.am: The 405ep support patch
      _still_ wasn't completely integrated.

2007-11-07 08:55  Kolja Waschk <kawk>

    * Makefile.am: Remove additional lines left over from unsuccessful
      patch before.

2007-11-07 08:47  Kolja Waschk <kawk>

    * data/Makefile.am, data/xilinx/PARTS, data/xilinx/xc2s300e,
      data/xilinx/xc2s300e/STEPPINGS, data/xilinx/xc2s300e/fg456,
      data/xilinx/xc2s300e/ft256, data/xilinx/xc2s300e/pq208,
      data/xilinx/xc2s300e/xc2s300e: [ 1377859 ] Device description
      files for Xilinx XC2S300E (Spartan-IIE) (Arnim Laeuger)

2007-11-07 08:41  Kolja Waschk <kawk>

    * data/Makefile.am: Added Xilinx parts XC3S*

2007-11-07 08:31  Kolja Waschk <kawk>

    * data/Makefile.am: Added Atmel AT91SAM7S files to Makefile.am

2007-11-07 08:16  Kolja Waschk <kawk>

    * data/xilinx/PARTS, data/xilinx/xc18v04pc44,
      data/xilinx/xc18v04pc44/STEPPINGS,
      data/xilinx/xc18v04pc44/xc18v04pc44, data/xilinx/xc2s200e-pq208,
      data/xilinx/xc2s200e-pq208/STEPPINGS,
      data/xilinx/xc2s200e-pq208/xc2s200e-pq208, data/xilinx/xc3s1000,
      data/xilinx/xc3s1000/STEPPINGS, data/xilinx/xc3s1000/xc3s1000,
      data/xilinx/xc3s1000/xc3s1000_fg320,
      data/xilinx/xc3s1000/xc3s1000_fg456,
      data/xilinx/xc3s1000/xc3s1000_fg676,
      data/xilinx/xc3s1000/xc3s1000_ft256,
      data/xilinx/xc3s1000/xc3s1000l,
      data/xilinx/xc3s1000/xc3s1000l_fg320,
      data/xilinx/xc3s1000/xc3s1000l_fg456,
      data/xilinx/xc3s1000/xc3s1000l_fg676,
      data/xilinx/xc3s1000/xc3s1000l_ft256, data/xilinx/xc3s100e_die,
      data/xilinx/xc3s100e_die/STEPPINGS,
      data/xilinx/xc3s100e_die/xc3s100e_die,
      data/xilinx/xc3s100e_die/xc3s100e_pq208,
      data/xilinx/xc3s100e_die/xc3s100e_tq144,
      data/xilinx/xc3s100e_die/xc3s100e_vq100, data/xilinx/xc3s1500,
      data/xilinx/xc3s1500/STEPPINGS, data/xilinx/xc3s1500/xc3s1500,
      data/xilinx/xc3s1500/xc3s1500_fg320,
      data/xilinx/xc3s1500/xc3s1500_fg456,
      data/xilinx/xc3s1500/xc3s1500_fg676,
      data/xilinx/xc3s1500/xc3s1500l,
      data/xilinx/xc3s1500/xc3s1500l_fg320,
      data/xilinx/xc3s1500/xc3s1500l_fg456,
      data/xilinx/xc3s1500/xc3s1500l_fg676, data/xilinx/xc3s200,
      data/xilinx/xc3s200/STEPPINGS, data/xilinx/xc3s200/xc3s200,
      data/xilinx/xc3s200/xc3s200_ft256,
      data/xilinx/xc3s200/xc3s200_pq208,
      data/xilinx/xc3s200/xc3s200_tq144,
      data/xilinx/xc3s200/xc3s200_vq100, data/xilinx/xc3s2000,
      data/xilinx/xc3s2000/STEPPINGS, data/xilinx/xc3s2000/xc3s2000,
      data/xilinx/xc3s2000/xc3s2000_fg456,
      data/xilinx/xc3s2000/xc3s2000_fg676,
      data/xilinx/xc3s2000/xc3s2000_fg900,
      data/xilinx/xc3s2000/xc3s2000l,
      data/xilinx/xc3s2000/xc3s2000l_fg676,
      data/xilinx/xc3s2000/xc3s2000l_fg900, data/xilinx/xc3s400,
      data/xilinx/xc3s400/STEPPINGS, data/xilinx/xc3s400/xc3s400,
      data/xilinx/xc3s400/xc3s400_fg320,
      data/xilinx/xc3s400/xc3s400_fg456,
      data/xilinx/xc3s400/xc3s400_ft256,
      data/xilinx/xc3s400/xc3s400_pq208,
      data/xilinx/xc3s400/xc3s400_tq144, data/xilinx/xc3s4000,
      data/xilinx/xc3s4000/STEPPINGS, data/xilinx/xc3s4000/xc3s4000,
      data/xilinx/xc3s4000/xc3s4000_fg1156,
      data/xilinx/xc3s4000/xc3s4000_fg676,
      data/xilinx/xc3s4000/xc3s4000_fg900,
      data/xilinx/xc3s4000/xc3s4000l,
      data/xilinx/xc3s4000/xc3s4000l_fg1156,
      data/xilinx/xc3s4000/xc3s4000l_fg900, data/xilinx/xc3s50,
      data/xilinx/xc3s50/STEPPINGS, data/xilinx/xc3s50/xc3s50,
      data/xilinx/xc3s50/xc3s50_cp132, data/xilinx/xc3s50/xc3s50_pq208,
      data/xilinx/xc3s50/xc3s50_tq144, data/xilinx/xc3s50/xc3s50_vq100,
      data/xilinx/xc3s5000, data/xilinx/xc3s5000/STEPPINGS,
      data/xilinx/xc3s5000/xc3s5000,
      data/xilinx/xc3s5000/xc3s5000_fg1156,
      data/xilinx/xc3s5000/xc3s5000_fg900, data/xilinx/xc3s500e_fg320,
      data/xilinx/xc3s500e_fg320/STEPPINGS,
      data/xilinx/xc3s500e_fg320/xc3s500e_fg320,
      data/xilinx/xc3s500e_fg320/xc3s500e_ft256,
      data/xilinx/xc3s500e_fg320/xc3s500e_pq208,
      data/xilinx/xc9572xl_vq44, data/xilinx/xc9572xl_vq44/STEPPINGS,
      data/xilinx/xc9572xl_vq44/xc9572xl_vq44, data/xilinx/xcf04s,
      data/xilinx/xcf04s/STEPPINGS, data/xilinx/xcf04s/xcf04s: Added
      Xilinx XC3S* parts and others from gumstix repository

2007-11-07 08:10  Kolja Waschk <kawk>

    * data/atmel/PARTS, data/atmel/at91sam7s256,
      data/atmel/at91sam7s256/STEPPINGS,
      data/atmel/at91sam7s256/at91sam7s_tq48v0,
      data/atmel/at91sam7s256/at91sam7s_tq64v0: Added AT91SAM7S256 data
      from gumstix repository

2007-11-06 21:39  Kolja Waschk <kawk>

    * src/bus/Makefile.am, src/bus/au1500.c, src/bus/bcm1250.c,
      src/bus/buses.c, src/bus/buses.h, src/bus/jopcyc.c,
      src/bus/lh7a400.c, src/bus/mpc5200.c, src/bus/ppc440gx_ebc8.c,
      src/bus/slsup3.c, src/bus/tx4925.c: some more fixes, eg. ppc405
      support patch still wasn't completely applied

2007-11-06 20:56  Kolja Waschk <kawk>

    * data/ibm/PARTS: [ 1173994 ] IBM PPC405EP support (PARTS file
      wasn't updated when I applied the patch)

2007-11-06 20:53  Kolja Waschk <kawk>

    * src/bus/Makefile.am, src/bus/buses.c, src/bus/buses.h,
      src/bus/jopcyc.c: [ 1281749 ] Bus driver for JOP.design Cyclone
      boards (jopcyc+serial patch) (Arnim Laeuger)

2007-11-06 20:49  Kolja Waschk <kawk>

    * data/Makefile.am, data/altera/PARTS, data/altera/ep1c12,
      data/altera/ep1c12/STEPPINGS, data/altera/ep1c12/ep1c12,
      data/altera/ep1c12/f256, data/altera/ep1c12/f324,
      data/altera/ep1c12/q240, data/altera/epm3064a,
      data/altera/epm3064a/STEPPINGS, data/altera/epm3064a/epm3064a,
      data/altera/epm3064a/l44, data/altera/epm3064a/t100,
      data/altera/epm3064a/t44: [ 1281673 ] Device description files
      for Altera EP1C12 and EPM3064A (Arnim Laeuger)

2007-11-06 20:32  Kolja Waschk <kawk>

    * include/jtag.h, src/Makefile.am, src/cmd/Makefile.am,
      src/cmd/cmd.c, src/cmd/writemem.c, src/writemem.c: [ 1249554 ]
      Writemem command to write to SRAM (Kent Palmkvist)

2007-11-06 20:29  Kolja Waschk <kawk>

    * data/Makefile.am, data/altera/PARTS, data/altera/ep1c6q240,
      data/altera/ep1c6q240/STEPPINGS, data/altera/ep1c6q240/ep1c6q240,
      src/bus/Makefile.am, src/bus/buses.c, src/bus/buses.h,
      src/bus/slsup3.c: [ 1249552 ] New bus type SLS UP3 (Altera FPGA
      board) (Kent Palmkvist)

2007-11-06 20:26  Kolja Waschk <kawk>

    * src/tap/cable.c, src/tap/cable/wiggler.c: [ 1236272 ] Add support
      for Analog Devices Blackfin Processor: IGLOO.patch (Robin Getz)

2007-11-06 20:24  Kolja Waschk <kawk>

    * src/bus/Makefile.am, src/bus/bf533_ezkit.c,
      src/bus/bf533_stamp.c, src/bus/buses.c, src/bus/buses.h: [
      1236272 ] Add support for Analog Devices Blackfin Processor:
      STAMP_EZKIT.patch (Robin Getz)

2007-11-06 20:20  Kolja Waschk <kawk>

    * data/MANUFACTURERS, data/Makefile.am, data/analog,
      data/analog/PARTS, data/analog/bf533,
      data/analog/bf533/STEPPINGS, data/analog/bf533/bf533: [ 1236272 ]
      Add support for Analog Devices Blackfin Processor: Blackfin.patch

2007-11-06 20:15  Kolja Waschk <kawk>

    * src/tap/parport/ppdev.c: [ 1194141 ] better diagnostics for
      opening ppdev device (Hein Roehrig)

2007-11-06 20:14  Kolja Waschk <kawk>

    * src/svf/svf.c, src/svf/svf.h, src/svf/svf_bison.y,
      src/svf/svf_flex.l: [ 1194137 ] better SVF diagnostics (+ manual
      integration with previous jtag-svf-vec-hexa fix) (Hein Roehrig)

2007-11-06 19:59  Kolja Waschk <kawk>

    * src/svf/svf.c: [ 1194140 ] SVF better RUNTEST timing (Hein Roehrig)

2007-11-06 19:53  Kolja Waschk <kawk>

    * include/Makefile.am, include/cable.h, include/fclock.h, src/Makefile.am,
      src/cmd/frequency.c, src/lib/Makefile.am, src/lib/fclock.c,
      src/tap/cable.c: [ 1194130 ] busy-loop waiting (breaks compilation of
      svf.c... wait for next two patches) (Hein Roehrig)

2007-11-06 19:34  Kolja Waschk <kawk>

    * src/tap/register.c: [ 1174000 ] Miscellanous fixes (omitting the
      speedup for flash.c, obsoleted by an earlier patch) (Wojtek Kaniewski)

2007-11-06 19:31  Kolja Waschk <kawk>

    * src/bsdl2jtag.c: [ 1173997 ] bsdl2jtag bidir support (Wojtek$ Kaniewski)

2007-11-06 19:29  Kolja Waschk <kawk>

    * data/Makefile.am, data/ibm/ppc405ep, data/ibm/ppc405ep/STEPPINGS,
      data/ibm/ppc405ep/ppc405ep: [ 1173994 ] IBM PPC405EP support (Wojtek
      Kaniewski)

2007-11-06 19:25  Kolja Waschk <kawk>

    * src/bsdl2jtag.c: [ 1169349 ] better error codes for bsdl2jtag (Hein
      Roehrig)

2007-11-06 19:23  Kolja Waschk <kawk>

    * data/sharp/lh7a400/lh7a400: [ 1164111 ] FIX of the lh7a400 port (Marko
      Roessler)

2007-11-06 19:22  Kolja Waschk <kawk>

    * data/Makefile.am, data/intel/PARTS, data/intel/pxa270,
      data/intel/pxa270/STEPPINGS, data/intel/pxa270/pxa270,
      libbrux/flash/intel.c, src/bus/buses.c, src/bus/buses.h,
      src/bus/pxa2x0.c, src/flash.c: [ 1112022 ] PXA270 Support (Cliff Brake)

2007-11-06 19:19  Kolja Waschk <kawk>

    * README.svf, include/svf.h: [ 1074347 ] SVF Player (README and
      include file) (Arnim Laeuger)

2007-11-06 19:18  Kolja Waschk <kawk>

    * data/freescale, data/freescale/PARTS, data/freescale/mpc5200,
      data/freescale/mpc5200/STEPPINGS, data/freescale/mpc5200/mpc5200,
      src/bus/mpc5200.c: [ 1079531 ] jtag mpc5200 support (added files)

2007-11-06 19:06  Kolja Waschk <kawk>

    * configure.ac, data/MANUFACTURERS, data/Makefile.am,
      include/chain.h, src/bus/Makefile.am, src/bus/buses.c,
      src/bus/buses.h: [ 1079531 ] jtag mpc5200 support (Asier Llano Palacios)

2007-11-06 19:01  Kolja Waschk <kawk>

    * src/Makefile.am: add -lm because SVF player uses floor()

2007-11-06 18:58  Kolja Waschk <kawk>

    * src/Makefile.am, src/cmd/Makefile.am, src/cmd/cmd.c,
      src/cmd/svf.c, src/svf, src/svf/Makefile.am, src/svf/svf.c,
      src/svf/svf.h, src/svf/svf_bison.y, src/svf/svf_flex.l,
      src/tap/chain.c, src/tap/tap.c: [ 1074347 ] SVF Player (4
      patches: jtag-svf, -inc1, -goto_state, -vec-hexa) (Arnim Laeuger)

2007-11-06 18:47  Kolja Waschk <kawk>

    * src/tap/cable/wiggler.c, src/tap/cable/wiggler2.c: [ 1060345 ]
      Fix certain Wigglers. (David Vrabel)

2007-11-06 18:37  Kolja Waschk <kawk>

    * src/cmd/bit.c: fix error from merging 972649+1012149 in bit.c

2007-11-06 18:32  Kolja Waschk <kawk>

    * src/cmd/bit.c: [ 1012149 ] Error messages in src/cmd/bit.c file (Jerome
      Debard)

2007-11-06 18:21  Kolja Waschk <kawk>

    * src/flash.c: [ 1012144 ] User messages printed during flashmem (Jerome
      Debard)

2007-11-06 18:14  Kolja Waschk <kawk>

    * src/cmd/dr.c: [ 986415 ] Allow interactive loading of DR (Martin Buck)

2007-11-06 18:09  Kolja Waschk <kawk>

    * src/cmd/bit.c, src/cmd/cable.c, src/cmd/dr.c, src/cmd/endian.c,
      src/cmd/flashmem.c, src/cmd/get.c, src/cmd/print.c,
      src/cmd/register.c, src/cmd/set.c, src/cmd/shift.c,
      src/part/part.c, src/tap/parport/direct.c,
      src/tap/parport/ppdev.c: [ 972649 ] make jtag more tolerant of
      case (Andrew Dyer)

2007-11-06 18:04  Kolja Waschk <kawk>

    * src/bus/ixp425.c, src/bus/mpc824x.c, src/bus/pxa2x0.c,
      src/bus/s3c4510x.c, src/bus/sa1110.c, src/bus/sh7727.c,
      src/bus/sh7750r.c, src/bus/sh7751r.c, src/cmd/detect.c,
      src/tap/Makefile.am, src/tap/cable.c, src/tap/cable/wiggler2.c: [
      909598 ] Detect 16bit flash on PXA25x 1/2 (partially included for
      compatibility with other patches and wiggler2 driver, but actual
      new pxa2x0 patch omitted - another later patch will fix this) (Matej)

2007-11-06 17:20  Kolja Waschk <kawk>

    * src/bus/s3c4510x.c, src/cmd/peekpoke.c, src/jtag.c: [ 826404 ]
      s3c4510 bus driver (without jedec.c fix) (Krzysztof Blaszkowski)

2007-11-06 16:51  Kolja Waschk <kawk>

    * include/flash.h: [ 1268229 ] gcc4 compilation fix (Asier Llano Palacios)

2007-11-06 09:30  Kolja Waschk <kawk>

    * libbrux, trunk/libbrux: moved libbrux subdir into jtag subdir. See
      ChangeLog there too

2007-11-02  Kolja Waschk <Kolja Waschk <kawk>>

    * created "UrJTAG" project as fork of openwince jtag tools. All older
      log entries in this ChangeLog describe the openwince development.

2004-11-24  Marcel Telka  <marcel@telka.sk>

    * src/cmd/reset.c: New file.
    * src/discovery.c (jtag_reset): Function changed to non-static.
    * src/cmd/Makefile.am (libcmd_a_SOURCES): Added reset.c.
    * src/cmd/cmd.c (cmds): Added cmd_reset.

2004-11-21  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (jtag_parse_stream, cleanup): New function.
    (jtag_parse_file): Replaced stream parsing algorithm with jtag_parse_stream() call. Removed support
        for special filename '-'.
    (main): Rewritten and improved startup sequence to distinguish between interactive invocation
        and stdin input (fixed bug 858535, thanks to Andrew Dyer for an idea).

2004-11-17  Marcel Telka  <marcel@telka.sk>

    * acinclude.m4: New file with VL_LIB_READLINE macro (removed dependency on ac-archive package).
    * autogen.sh: Removed acinclude call (removed dependency on ac-archive package).

2004-11-16  Marcel Telka  <marcel@telka.sk>

    * data/MANUFACTURERS: Added Lattice Semiconductors and IBM Semiconductors (patch 1012120, Jerome Debard).
    * data/ibm/PARTS: New file (patch 1012120, Jerome Debard).
    * data/ibm/ppc440gx/STEPPINGS: Ditto.
    * data/ibm/ppc440gx/ppc440gx: Ditto.
    * data/lattice/PARTS: Ditto.
    * data/lattice/lc4032v-tqfp48/STEPPINGS: Ditto.
    * data/lattice/lc4032v-tqfp48/lc4032v-tqfp48: Ditto.
    * data/lattice/m4a3-256.192-fpbga256/STEPPINGS: Ditto.
    * data/lattice/m4a3-256.192-fpbga256/m4a3-256.192-fpbga256: Ditto.
    * data/lattice/m4a3-64.32-tqfp48/STEPPINGS: Ditto.
    * data/lattice/m4a3-64.32-tqfp48/m4a3-64.32-tqfp48: Ditto.
    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added new files.

2004-10-22  Marcel Telka  <marcel@telka.sk>

    * data/MANUFACTURERS: Added Sharp manufacturer (patch 886068, Marko Rößler).
    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added new files (patch 886068, Marko Rößler).
    * data/sharp/PARTS: New file (patch 886068, Marko Rößler).
    * data/sharp/lh7a400/STEPPINGS: Ditto.
    * data/sharp/lh7a400/lh7a400: Ditto.
    * src/bus/lh7a400.c: Ditto.
    * src/bus/Makefile.am (libbus_a_SOURCES): Added lh7a400.c (patch 886068, Marko Rößler).
    * src/bus/buses.c (bus_drivers): Added lh7a400_bus (patch 886068, Marko Rößler).
    * src/bus/buses.h: Ditto.

2004-10-17  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_INIT): Changed version number to 0.6.
    (AM_GNU_GETTEXT_VERSION): Changed version number for gettext to 0.14.1.

2004-10-17  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable/wiggler.c (nTRST): Changed pin value (patch 1040199, Andrew Dyer).
    (nSRESET): New pin value (patch 1040199, Andrew Dyer).
    (wiggler_init, wiggler_clock, wiggler_get_tdo, wiggler_set_trst): Changed nTRST to not inverted
        signal (patch 1040199, Andrew Dyer).

2004-09-21  Marcel Telka  <marcel@telka.sk>

    * data/intel/PARTS: Added support for different IXP425 frequency variants (patch 1030647, Trevor Man).

2004-08-24  Marcel Telka  <marcel@telka.sk>

    * src/bus/Makefile.am (libbus_a_SOURCES): Added ppc440gx_ebc8.c.
    * src/bus/buses.c (bus_drivers): Added ppc440gx_ebc8_bus (patch 1012154, Jerome Debard).
    * src/bus/buses.h: Ditto.
    * src/bus/ppc440gx_ebc8.c: New file (patch 1012154, Jerome Debard).

2004-08-20  Marcel Telka  <marcel@telka.sk>

    * src/bus/pxa2x0.c (pxa2x0_bus_init): New function.
    (pxa250_bus_prepare): Replaced bus initialization sequence with pxa2x0_bus_init() call.
    (pxa2x0_bus_area): Added pxa2x0_bus_init() call.

2004-08-20  Marcel Telka  <marcel@telka.sk>

    * src/tap/Makefile.am (libtap_a_SOURCES): Added cable/lattice.c.
    * src/tap/cable.c (cable_drivers): Added lattice_cable_driver (patch 1012138, Jerome Debard).
    * src/tap/cable/lattice.c: New file (patch 1012138, Jerome Debard).

2004-08-19  Marcel Telka  <marcel@telka.sk>

    * src/bus/Makefile.am (libbus_a_SOURCES): Added tx4925.c (patch 972625, Andrew Dyer).
    * src/bus/buses.c (bus_drivers): Added tx4925_bus (patch 972625, Andrew Dyer).
    * src/bus/buses.h: Ditto.
    * src/bus/tx4925.c: New file (patch 972625, Andrew Dyer).

2004-08-17  Marcel Telka  <marcel@telka.sk>

    * data/MANUFACTURERS: Added Toshiba manufacturer (patch 972621, Andrew Dyer).
    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added new files (patch 972621, Andrew Dyer).
    * data/xilinx/PARTS: Added XCR3032XL-VQ44 entry (patch 972621, Andrew Dyer).
    * data/xilinx/xcr3032xl-vq44/STEPPINGS: New file (patch 972621, Andrew Dyer).
    * data/xilinx/xcr3032xl-vq44/xcr3032xl-vq44: Ditto.
    * data/toshiba/PARTS: Ditto.
    * data/toshiba/tx4925/STEPPINGS: Ditto.
    * data/toshiba/tx4925/tx4925: Ditto.
    * data/toshiba/tx4926/STEPPINGS: Ditto.
    * data/toshiba/tx4926/tx4926: Ditto.

2004-08-17  Marcel Telka  <marcel@telka.sk>

    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added new files.
    * data/philips/PARTS: Added XCR3128XL-VQ100 entry (patch 1010714, Michael Lauer).
    * data/xilinx/PARTS: Added directory for XCR3128XL-VQ100 entry (patch 1010714, Michael Lauer).
    * data/philips/xcr3128xl-vq100/STEPPINGS: New file (patch 1010714, Michael Lauer).
    * data/philips/xcr3128xl-vq100/xcr3128xl-vq100: Ditto.
    * data/xilinx/xcr3128xl-vq100/xcr3128xl-vq100: Ditto.

2004-08-16  Marcel Telka  <marcel@telka.sk>

    * src/bus/pxa2x0.c (bus_params_t): Added new member: inited.
    (INITED): New macro.
    (pxa2x0_bus_new): Removed BOOT_DEF initialization.
    (pxa250_bus_prepare): Added BOOT_DEF initialization.

2004-08-15  Marcel Telka  <marcel@telka.sk>

    * include/jtag.h (detect_parts): Changed return type.
    * src/detect.c (detect_parts): Changed return value to return number of detected parts.
    * src/cmd/detect.c (cmd_detect_run): Added reset of the chain->parts to NULL before
        detect_parts() call. Ignored detect_parts() return value.

2004-08-13  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c: Added missing locale.h include (patch 986414, Martin Buck).

2004-08-11  Marcel Telka  <marcel@telka.sk>

    * Makefile.rules (RECURSIVE_TARGETS, lint-recursive): Removed.
    (lint): Added command to run recursive make.
    (.PHONY): Removed lint-recursive.

2004-06-13  Marcel Telka  <marcel@telka.sk>

    * data/broadcom/PARTS: Added BCM4712 entry (Alan Wallace).
    * data/broadcom/bcm4712/STEPPINGS: New file (Alan Wallace).
    * data/broadcom/bcm4712/bcm4712: Ditto.

2004-01-20  Marcel Telka  <marcel@telka.sk>

    * acinclude.m4: File removed.
    * autogen.sh: Added acinclude call.

2003-12-20  Marcel Telka  <marcel@telka.sk>

    * src/bus/Makefile.am (libbus_a_SOURCES): Added au1500.c.
    * src/bus/au1500.c: New file (patch 853883, Zhang Wei).
    * src/bus/buses.c (bus_drivers): Added au1500_bus (patch 853883, Zhang Wei).
    * src/bus/buses.h: Added au1500_bus.

2003-11-02  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_INIT): Changed version number to 0.5.2.

    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added motorola/mpc8245/1.2.
    * data/motorola/mpc8245/1.2: New file.
    * src/bus/mpc824x.c: Ditto.
    * src/bus/Makefile.am (libbus_a_SOURCES): Added mpc824x.c.
    * src/bus/buses.c (bus_drivers): Added mpc824x_bus.
    * src/bus/buses.h (mpc824x_bus): Added bus declaration.

    * include/bsbit.h (bsbit_alloc): Changed parameter name (signals -> signal).
    * src/part/bsbit.c (bsbit_alloc): Changed parameter behaviour.
    * src/cmd/bit.c (cmd_bit_run): Passed exact signal to bsbit_alloc() instead of list of signals.

    * src/jtag.c (main): Added cfi_array deallocation.

    * src/flash.c (set_flash_driver): Used global cfi_array variable to set flash driver.
    (flashcheck): Function removed.
    All function calls replaced by set_flash_driver().
    (flashmsbin): Removed local cfi_array variable.
    (flashmem): Removed local cfi_array variable. Fixed bug with one more block erase while programming
        data at end of previous block.
    (flasherase): Removed local cfi_array variable. Fixed block number calculation.
    * src/readmem.c (readmem): Fixed bug while reading address near to end of 32 bit address range.
    * src/bus/pxa2x0.c (pxa2x0_bus_new): Added BSR sampling before BOOT_DEF initialization (bugfix).

2003-10-23  Marcel Telka  <marcel@telka.sk>

    * include/bssignal.h (salias_t): Added new type.
    (salias_alloc, salias_free): Adde new function prototypes.
    * include/part.h (struct part): Added new structure member 'saliases'.
    * src/cmd/Makefile.am (libcmd_a_SOURCES): Added salias.c.
    * src/cmd/cmd.c (cmds): Added cmd_salias.
    * src/cmd/salias.c: New file.
    * src/part/part.c (part_alloc): Added saliases initialization.
    (part_free): Added saliases deallocation.
    (part_find_signal): Added signal aliases searching.
    * src/part/signal.c (salias_alloc, salias_free): New functions.

2003-10-20  Marcel Telka  <marcel@telka.sk>

    * data/hitachi/hd64465/hd64465: Completed BSR bits declaration.

2003-10-20  Marcel Telka  <marcel@telka.sk>

    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added hitachi/sh7729/STEPPINGS and hitachi/sh7729/sh7729.
    * data/hitachi/sh7729/STEPPINGS: New file (Beregnyei Balazs).
    * data/hitachi/sh7729/sh7729: Ditto.

2003-10-17  Marcel Telka  <marcel@telka.sk>

    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added hitachi/hd64465/hd64465.
    * data/hitachi/hd64465/hd64465: New file.

2003-10-13  Marcel Telka  <marcel@telka>

    * data/intel/ixp425/STEPPINGS: Added B0 stepping.

2003-10-11  Marcel Telka  <marcel@telka>

    Version 0.5.1 released.

2003-09-23  Marcel Telka  <marcel@telka.sk>

    * src/flash.c (flash_drivers): Added amd_16_flash_driver (Bradley D. LaRonde).
    (find_block): New function (Bradley D. LaRonde).
    (flashmem): Added block calculations using exact CFI data (Bradley D. LaRonde).

    * src/tap/cable/triton.c (triton_init): Removed unused variable 'data'.

2003-09-15  Marcel Telka  <marcel@telka.sk>

    * configure.ac: Fixed spelling (patch 805108, Andreas Mohr).
    * src/jtag.c (main): Ditto.
    * src/cmd/discovery.c (cmd_discovery_help, cmd_discovery): Ditto.
    * src/cmd/flashmem.c (cmd_flashmem_help): Ditto.

    * src/tap/cable/ei012.c: Changed comment (patch 805108, Andreas Mohr).
    * src/tap/cable/keithkoep.c: Ditto.
    * src/tap/cable/mpcbdm.c: Ditto.

2003-09-14  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable/triton.c: New file (patch 805103, Andreas Mohr).
    * src/tap/Makefile.am (libtap_a_SOURCES): Added cable/triton.c (patch 805103, Andreas Mohr).
    * src/tap/cable.c (cable_drivers): Added triton_cable_driver member (patch 805103, Andreas Mohr).
    * src/tap/cable/generic.h (PARAM_SRESET): New macro (patch 805103, Andreas Mohr).
    (generic_params_t): New structure member 'sreset' (patch 805103, Andreas Mohr).

    * configure.ac: Changed description for --with-include parameter (thanks to Andreas Mohr).

2003-09-12  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_CHECK_FUNCS): Added swprintf.
    * src/cmd/print.c (cmd_print_run): Added alternative implementation of the header printing using
        snprintf() for platforms without swprintf() function available.

2003-09-12  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_INIT): Changed version number to 0.5.1.

2003-09-11  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable/wiggler.c (wiggler_init, wiggler_clock, wiggler_get_tdo, wiggler_set_trst): Fixed
        inverted TRST signal (see patch 799377 for more info, thanks to Mike Tesch for reporting).

2003-09-11  Marcel Telka  <marcel@telka.sk>

    * src/cmd/dr.c (cmd_dr_run): Added test for missing active instruction and data register (thanks to
        Mike Tesch for reporting).

2003-09-10  Marcel Telka  <marcel@telka.sk>

    * src/bus/bcm1250.c (bcm1250_bus_printinfo, bcm1250_bus): Fixed typo (compatibile->compatible) in
        output message (thanks to Andreas Mohr).
    * src/bus/ixp425.c (ixp425_bus_printinfo, ixp425_bus): Ditto.
    * src/bus/pxa2x0.c (pxa2x0_bus_printinfo, pxa2x0_bus): Ditto.
    * src/bus/s3c4510x.c (s3c4510_bus_printinfo, s3c4510_bus): Ditto.
    * src/bus/sa1110.c (sa1110_bus_printinfo, sa1110_bus): Ditto.
    * src/bus/sh7727.c (sh7727_bus_printinfo, sh7727_bus): Ditto.
    * src/bus/sh7750r.c (sh7750r_bus_printinfo, sh7750r_bus): Ditto.
    * src/bus/sh7751r.c (sh7751r_bus_printinfo, sh7751r_bus): Ditto.

2003-09-05  Marcel Telka  <marcel@telka.sk>

    * include/bus.h (bus_drivers): Added constant declaration.
    (new_sa1110_bus, new_pxa250_bus, new_ixp425_bus, new_sh7727_bus, new_sh7750r_bus, new_sh7751r_bus)
    (new_bcm1250_bus): Function declarations removed.
    * src/bus/buses.c (bus_drivers): New constant definition.
    * src/bus/buses.h: New file.
    * src/bus/Makefile.am (libbus_a_SOURCES): Added buses.h.

    * src/bus/bcm1250.c (bcm1250_bus_printinfo): Added new function parameter 'bus'.
    (bcm1250_bus): Changed structure type to bus_driver_t. Changed members.
    (new_bcm1250_bus): Function renamed ...
    (bcm1250_bus_new): ... to this one. Changed parameter list to void (and function body updated).
    * src/bus/ixp425.c (ixp425_bus_printinfo): Added new function parameter 'bus'.
    (ixp425_bus): Changed structure type to bus_driver_t. Changed members.
    (new_ixp425_bus): Function renamed ...
    (ixp425_bus_new): ... to this one. Changed parameter list to void (and function body updated).
    * src/bus/pxa2x0.c (pxa2x0_bus_printinfo): Added new function parameter 'bus'.
    (pxa250_bus): Structure transformed ...
    (pxa2x0_bus): ... to this constant (changed type to bus_driver_t, changed members).
    (new_pxa250_bus): Function renamed ...
    (pxa2x0_bus_new): ... to this one. Changed parameter list to void (and function body updated).
    * src/bus/s3c4510x.c (s3c4510_bus_printinfo): Added new function parameter 'bus'.
    (s3c4510_bus): Changed structure type to bus_driver_t. Changed members.
    (new_s3c4510_bus): Function renamed ...
    (s3c4510_bus_new): ... to this one. Changed parameter list to void (and function body updated).
    * src/bus/sa1110.c (sa1110_bus_printinfo): Added new function parameter 'bus'.
    (sa1110_bus): Changed structure type to bus_driver_t. Changed members.
    (new_sa1110_bus): Function renamed ...
    (sa1110_bus_new): ... to this one. Changed parameter list to void (and function body updated).
    * src/bus/sh7727.c (sh7727_bus_printinfo): Added new function parameter 'bus'.
    (sh7727_bus): Changed structure type to bus_driver_t. Changed members.
    (new_sh7727_bus): Function renamed ...
    (sh7727_bus_new): ... to this one. Changed parameter list to void (and function body updated).
    * src/bus/sh7750r.c (sh7750r_bus_printinfo): Added new function parameter 'bus'.
    (sh7750r_bus): Changed structure type to bus_driver_t. Changed members.
    (new_sh7750r_bus): Function renamed ...
    (sh7750r_bus_new): ... to this one. Changed parameter list to void (and function body updated).
    * src/bus/sh7751r.c (sh7751r_bus_printinfo): Added new function parameter 'bus'.
    (sh7751r_bus): Changed structure type to bus_driver_t. Changed members.
    (new_sh7751r_bus): Function renamed ...
    (sh7751r_bus_new): ... to this one. Changed parameter list to void (and function body updated).

    * src/cmd/cable.c (cmd_cable_run): Replaced bus->free() call with bus_free().
    * src/jtag.c (main): Ditto.

    * src/cmd/cmd.c (cmds): Added cmd_initbus.
    * src/cmd/detect.c (cmd_detect_run): Removed explicit bus driver detection.
    * src/cmd/initbus.c: New file.
    * src/cmd/Makefile.am (libcmd_a_SOURCES): Added initbus.c.

    * data/broadcom/bcm1250/bcm1250: Added 'initbus' command call.
    * data/hitachi/sh7727/sh7727: Ditto.
    * data/intel/ixp425/ixp425: Ditto.
    * data/intel/pxa250/pxa250: Ditto.
    * data/intel/pxa250/pxa250c0: Ditto.
    * data/intel/sa1110/sa1110: Ditto.
    * data/samsung/s3c4510b/s3c4510b: Ditto.

2003-09-04  Marcel Telka  <marcel@telka.sk>

    * configure.ac (CPPFLAGS): Added top_srcdir into include directory list.

2003-09-03  Marcel Telka  <marcel@telka.sk>

    * src/bus/pxa2x0.c (set_data_in, setup_data): Added new 'adr' parameter. Used real data bus width
        for data reading (based on patch 792591, thanks to Guennadi Liakhovetski).
    All function callers updated.
    (pxa250_bus_read_next, pxa250_bus_read_end): Used real data bus width for data reading (based on
        patch 792591, thanks to Guennadi Liakhovetski).
    * src/bus/sa1110.c (set_data_in, setup_data, sa1110_bus_read_next, sa1110_bus_read_end): Ditto.
    * src/bus/sh7727.c (set_data_in, setup_data, sh7727_bus_read_next, sh7727_bus_read_end): Ditto.

2003-08-28  Marcel Telka  <marcel@telka.sk>

    * src/bus/pxa2x0.c (pxa250_bus_read_next, pxa250_bus_read_end): Added support for BOOT_DEF register
        emulation.
    (pxa2x0_bus_area): Added Memory Mapped registers (Memory Ctl) area.

2003-08-28  Marcel Telka  <marcel@telka.sk>

    * src/readmem.c (readmem): Replaced bus_width macro with new bus_area.
    * src/bus/bcm1250.c (bcm1250_bus_width): Function removed.
    (bcm1250_bus_area): New function.
    * src/bus/ixp425.c (ixp425_bus_width): Function removed.
    (ixp425_bus_area): New function.
    * src/bus/pxa2x0.c (pxa250_bus_width): Function removed.
    (pxa2x0_bus_area): New function.
    * src/bus/s3c4510x.c (s3c4510_bus_width): Function removed.
    (s3c4510_bus_area): New function.
    * src/bus/sa1110.c (sa1110_bus_width: Function removed.
    (sa1110_bus_area): New function.
    * src/bus/sh7727.c (sh7727_bus_width): Function removed.
    (sh7727_bus_area): New function.
    * src/bus/sh7750r.c (sh7750r_bus_width): Function removed.
    (sh7750r_bus_area): New function.
    * src/bus/sh7751r.c (sh7751r_bus_width): Function removed.
    (sh7751r_bus_area): New function.
    * src/cmd/print.c (cmd_print_run): Added bus area printing.

2003-08-27  Marcel Telka  <marcel@telka.sk>

    * include/flash.h: Removed CFI_INTEL_ERROR_* macros.

2003-08-26  Marcel Telka  <marcel@telka.sk>

    * src/cmd/print.c (cmd_print_run): Fixed header print format.

2003-08-25  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_INIT): Changed package name.
    * src/jtag.c (main): Added full package name to banner.

2003-08-22  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable/byteblaster.c (byteblaster_init): Added additional checks for valid ByteBlaster cable
        connection and enabled all variants of the cable (patch 793313, Rojhalat Ibrahim).

2003-08-22  Marcel Telka  <marcel@telka.sk>

    * MANUFACTURERS: Added Altera manufacturer (Rojhalat Ibrahim).
    * altera/PARTS: New file (Rojhalat Ibrahim).
    * altera/ep1c20f400/STEPPINGS: Ditto.
    * altera/ep1c20f400/ep1c20f400: Ditto.
    * altera/epm7128aetc100/STEPPINGS: Ditto.
    * altera/epm7128aetc100/epm7128aetc100: Ditto.
    * Makefile.am (nobase_dist_pkgdata_DATA): Added new Altera JTAG files.

2003-08-19  Marcel Telka  <marcel@telka.sk>

    Version 0.5 released.

2003-08-19  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AM_GNU_GETTEXT_VERSION): Changed version number to 0.12.1.

2003-08-19  Marcel Telka  <marcel@telka.sk>

    * src/bus/s3c4510x.c: Changed comment.

2003-08-19  Marcel Telka  <marcel@telka.sk>

    * src/bus/Makefile.am (libbus_a_SOURCES): Added s3c4510x.c.
    * src/bus/s3c4510x.c: New file (Jiun-Shian Ho).

2003-08-19  Marcel Telka  <marcel@telka.sk>

    * src/tap/parport/direct.c (direct_connect): Marked two indirect strings for translation.
    * src/tap/parport/ppdev.c (ppdev_connect): Ditto.

2003-08-19  Marcel Telka  <marcel@telka.sk>

    * sysdep.h: Renamed pkgcfg.h to config.h.
    * configure.ac (AM_CONFIG_HEADER): Ditto.

2003-08-19  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (main): Fixed setlocale() call.
    * Makefile.am (noinst_HEADERS): Renamed config.h -> sysdep.h.
    * config.h: Renamed this file ...
    * sysdep.h: ... to this one.
    Changed config.h -> sysdep.h include in all source files.

2003-08-18  Marcel Telka  <marcel@telka.sk>

    * data/samsung/s3c4510b/s3c4510b: Fixed some errors in instruction declarations (Jiun-Shian Ho).

2003-08-18  Marcel Telka  <marcel@telka.sk>

    * src/detect.c (detect_parts): Marked one forgotten string for translation.
    * src/cmd/bit.c (cmd_bit_run): Fixed control bit setup.
    * src/cmd/eraseflash.c (cmd_eraseflash_run): Changed formatting.
    (cmd_eraseflash_help): Updated help text.
    * src/cmd/flashmem.c (cmd_flashmem_help): Ditto.
    * src/cmd/readmem.c (cmd_readmem_help): Ditto.

2003-08-14  Marcel Telka  <marcel@telka.sk>

    * include/jtag.h (flasherase): New function prototype (patch 772267, Thomas Fröhlich).
    * src/flash.c (flasherase): New function (patch 772267, Thomas Fröhlich).
    * src/cmd/Makefile.am (libcmd_a_SOURCES): Added eraseflash.c (patch 772267, Thomas Fröhlich).
    * src/cmd/cmd.c (cmds): Added cmd_eraseflash (patch 772267, Thomas Fröhlich).
    * src/cmd/eraseflash.c: New file (patch 772267, Thomas Fröhlich).

2003-08-14  Marcel Telka  <marcel@telka.sk>

    * src/tap/chain.c (chain_shift_instructions): Moved test for parts without active instruction before
        shifting process.
    (chain_shift_data_registers): Moved test for parts without active instruction or data register before
        shifting process.

2003-08-14  Marcel Telka  <marcel@telka.sk>

    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added samsung/s3c4510b/s3c4510b.
    * data/samsung/s3c4510b/s3c4510b: New file (Jiun-Shian Ho).

2003-08-14  Marcel Telka  <marcel@telka.sk>

    * data/MANUFACTURERS: Changed directory name for Philips.
    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added philips/PARTS, philips/xcr3128xl-cs144/STEPPINGS, and
        philips/xcr3128xl-cs144/xcr3128xl-cs144.
    * data/philips/PARTS: New file.
    * data/philips/xcr3128xl-cs144/STEPPINGS: Ditto.
    * data/philips/xcr3128xl-cs144/xcr3128xl-cs144: Ditto.
    * include/part.h (MAXLEN_MANUFACTURER): Increased size to 25.

2003-08-13  Marcel Telka  <marcel@telka.sk>

    * include/jtag.h (detect_register_size): Added function declaration.
    * src/discovery.c (detect_register_size): Changed to non-static.
    * src/detect.c (detect_parts): Added support for parts without IDCODE.

2003-08-13  Marcel Telka  <marcel@telka.sk>

    * src/bus/sa1110.c (sa1110_bus_width): Removed bus width printing.
    * src/bus/sh7751r.c (sh7751r_bus_printinfo): New function.

2003-08-13  Marcel Telka  <marcel@telka.sk>

    * include/bus.h (new_sh7751r_bus): New function declaration (patch 773533, Matan Ziv-Av).
    * src/bus/Makefile.am (libbus_a_SOURCES): Added sh7751r.c (patch 773533, Matan Ziv-Av).
    * src/bus/sh7751r.c: New file (patch 773533, Matan Ziv-Av).

2003-08-13  Marcel Telka  <marcel@telka.sk>

    * include/part.h (struct part): Added new member 'id'.
    (part_alloc): Added new parameter 'id'.
    * src/detect.c (detect_parts): Added execution JTAG declarations as script.
    * src/jtag.c (get_token): Added support for in-line comments.
    * src/cmd/Makefile.am (libcmd_a_SOURCES): Added signal.c, bit.c, and register.c.
    * src/cmd/bit.c: New file.
    * src/cmd/register.c: Ditto.
    * src/cmd/signal.c: Ditto.
    * src/cmd/cmd.c (cmds): Added cmd_signal, cmd_bit, and cmd_register.
    * src/cmd/instruction.c (cmd_instruction_run, cmd_instruction_help, cmd_instruction): Added support
        for new instruction declaration.
    * src/part/parse.c: File removed.
    * src/part/Makefile.am (libpart_a_SOURCES): Removed parse.c.
    * src/cmd/detect.c (cmd_detect_run): Fixed possible NULL pointer dereference.
    * src/part/part.c (part_alloc): Added new parameter 'id'.
    (part_free): Addedd id deallocation.
    (part_print): Added support for instructions without data register.
    * src/tap/chain.c (chain_shift_data_registers): Ditto.

2003-08-13  Marcel Telka  <marcel@telka.sk>

    * data/broadcom/bcm5421s/bcm5421s: Fixed bad pin -> signal changes.

2003-08-13  Marcel Telka  <marcel@telka.sk>

    * data/broadcom/bcm1250/bcm1250: Changed pin -> signal keyword.
    * data/broadcom/bcm5421s/bcm5421s: Ditto.
    * data/hitachi/sh7727/sh7727: Ditto.
    * data/intel/ixp425/ixp425: Ditto.
    * data/intel/pxa250/pxa250: Ditto.
    * data/intel/pxa250/pxa250c0: Ditto.
    * data/intel/sa1110/sa1110: Ditto.
    * data/xilinx/xc2c256-tq144/xc2c256-tq144: Ditto.
    * data/xilinx/xcr3128xl-cs144/xcr3128xl-cs144: Ditto.
    * data/xilinx/xcr3256xl-ft256/xcr3256xl-ft256: Ditto.

2003-08-12  Marcel Telka  <marcel@telka.sk>

    * src/bsdl2jtag.c (endline): Added support for "downto" in bit vectors and "observe_only" (patch 787346,
        Brad Parker).

2003-08-11  Marcel Telka  <marcel@telka.sk>

    * src/cmd/Makefile.am (libcmd_a_SOURCES): Added include.c.
    * src/cmd/include.c: New file.
    * src/cmd/cmd.c (cmds): Added cmd_include.

2003-08-11  Marcel Telka  <marcel@telka.sk>

    * src/flash.c (flash_drivers): Added amd_8_flash_driver.

2003-08-11  Marcel Telka  <marcel@telka.sk>

    * include/bus.h (buses_t): Added new structure.
    * src/jtag.c (bus): Removed global variable.
    * src/bus/Makefile.am (libbus_a_SOURCES): Added buses.c.
    * src/bus/buses.c: New file.
    * src/bus/bcm1250.c (bcm1250_bus_printinfo): New function.
    * src/bus/ixp425.c (ixp425_bus_printinfo): Ditto.
    * src/bus/pxa2x0.c (pxa2x0_bus_printinfo): Ditto.
    * src/bus/sa1110.c (sa1110_bus_printinfo): Ditto.
    * src/bus/sh7727.c (sh7727_bus_printinfo): Ditto.
    * src/bus/sh7750r.c (sh7750r_bus_printinfo): Ditto.
    * src/cmd/Makefile.am (libcmd_a_SOURCES): Added bus.c.
    * src/cmd/bus.c: New file.
    * src/cmd/cmd.c (cmds): Added cmd_bus.
    * src/cmd/detect.c (cmd_detect_run): Added support for multiple buses detection.
    * src/cmd/print.c (cmd_print_run): Fixed header printing while syntax error. Added support for printing
        list of active buses.
    (cmd_print_help): Added new parameter 'bus'.

2003-08-11  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_INIT): Changed version number to 0.5.

    * include/chain.h (chain_t): Added active_part.
    * src/tap/chain.c (chain_alloc): Added active_part initialization.
    * include/part.h (parts_print): Removed 'header' parameter.
    * src/part/part.c (parts_print): Removed header printing.
    * src/cmd/print.c (cmd_print_run): Added header printg. Added new parameter 'chain' for print command.
    (cmd_print_help): Added new parameter 'chain'.
    * src/cmd/dr.c (cmd_dr_run, cmd_dr_help): Removed PART parameter.
    * src/cmd/get.c (cmd_get_run, cmd_get_help): Ditto.
    * src/cmd/instruction.c (cmd_instruction_run, cmd_instruction_help): Ditto.
    * src/cmd/set.c (cmd_set_run, cmd_set_help): Ditto.
    * src/cmd/Makefile.am (libcmd_a_SOURCES): Adde part.c.
    * src/cmd/part.c: New file.
    * src/cmd/cmd.c (cmds): Added cmd_part.

2003-07-25  Marcel Telka  <marcel@telka.sk>

    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added broadcom/bcm3310/STEPPINGS and
        broadcom/bcm3310/bcm3310.
    * data/broadcom/PARTS: Added BCM3310.
    * data/broadcom/bcm3310/STEPPINGS: New file.
    * data/broadcom/bcm3310/bcm3310: Ditto.

2003-07-24  Marcel Telka  <marcel@telka.sk>

    * po/POTFILES.in: Removed missing files.
    * configure.ac: Removed VL_LIB_READLINE macro and moved it to ...
    * acinclude.m4: ... this new file.

2003-07-16  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (jtag_parse_line): Fixed invalid memory allocation size (core dump).

2003-07-01  Marcel Telka  <marcel@telka.sk>

    * include/bus.h (new_sh7750r_bus, new_bcm1250_bus): New function declarations (patch 753300, Matan Ziv-Av).
    * src/bus/Makefile.am (libbus_a_SOURCES): Added bcm1250.c and sh7750r.c (patch 753300, Matan Ziv-Av).
    * src/bus/bcm1250.c: New file (patch 753300, Matan Ziv-Av).
    * src/bus/sh7750r.c: Ditto.
    * src/cmd/detect.c (cmd_detect_run): Added bus driver for SH7750R and BCM1250 (patch 753300, Matan Ziv-Av).

2003-06-19  Marcel Telka  <marcel@telka.sk>

    * include/jtag.h (discovery): Removed 'filename' parameter.
    * src/discovery.c (TEST_COUNT): Changed test repeat count from 5 to 1.
    (detect_register_size): Removed 'f' parameter. Removed output messages.
    (jtag_reset): Removed sleep() calls.
    (discovery): Removed 'filename' parameter. Removed support for output to file. Simplified output
        messages.
    * src/cmd/discovery.c (cmd_discovery_run): Removed FILENAME parameter.
    (cmd_discovery_help): Updated help text.

2003-06-18  Marcel Telka  <marcel@telka.sk>

    * src/discovery.c (discovery): Removed explicit JTAG chain length detection. Changed starting of the DR
        size detection from all 1 instead all 0 for IR (patch 753298, Matan Ziv-Av).

2003-06-18  Marcel Telka  <marcel@telka.sk>

    * /src/flash.c (flash_drivers): Added 1 x 8 bit Intel Flash driver (patch 753295, Matan Ziv-Av).

2003-06-12  Marcel Telka  <marcel@telka.sk>

    * include/flash.h (flash_driver_t): Structure removed.
    (flash_erase_block, flash_unlock_block, flash_program, flash_readarray): Macro removed.
    * src/flash.c (set_flash_driver, flashcheck, flashmsbin, flashmem): Updated for new
        flash_driver_t declared in brux/flash.h in include module.

2003-06-10  Marcel Telka  <marcel@telka.sk>

    * include/Makefile.am (noinst_HEADERS): Removed cfi.h.
    * include/cfi.h: File removed.
    * src/flash.c: Updated include header files.

2003-06-10  Marcel Telka  <marcel@telka.sk>

    * src/bus/sh7727.c (bus_params_t): Added md3 and md4.
    (sh7727_bus_width): Moved to implementation using MD3 and MD4 (thanks to Rainer Dörken).
    (new_sh7727_bus): Added MD3 and MD4 signal searching (thanks to Rainer Dörken).

2003-06-10  Marcel Telka  <marcel@telka.sk>

    * src/bus/ixp425.c (ixp425_bus_width): Changed return value type (int -> unsigned int).
    * src/bus/pxa2x0.c (pxa250_bus_width): Ditto.
    * src/bus/sa1110.c (sa1110_bus_width): Ditto.
    * src/bus/sh7727.c (sh7727_bus_width): Ditto.

2003-06-06  Marcel Telka  <marcel@telka.sk>

    * src/bus/sh7727.c (bus_params_t): Fixed cs array length.
    (setup_address): Removed address shift by BASE.
    (sh7727_bus_read_end): Simplified CS handling.
    (new_sh7727_bus): Fixed CS signal searching (thanks to Rainer Dörken).

2003-06-03  Marcel Telka  <marcel@telka.sk>

    * include/cfi.h (detect_cfi): Macro removed.
    * src/flash.c (flashcheck): Renamed detect_cfi to cfi_detect.

2003-06-03  Marcel Telka  <marcel@telka.sk>

    * src/Makefile.am (jtag_LDADD): Added libbrux twice to resolve dependencies.
    * src/jtag.c: Fixed cmd.h include path.

2003-06-03  Marcel Telka  <marcel@telka.sk>

    * src/cmd/Makefile.am (libcmd_a_SOURCES): Removed quit.c, help.c, and detectflash.c.
    * src/cmd/cmd.c (cmd_run, cmd_params, cmd_get_number): Functions moved to module libbrux,
        file cmd/cmd.c.
    * src/cmd/detectflash.c: File moved to module libbrux, directory cmd.
    * src/cmd/help.c: Ditto.
    * src/cmd/quit.c: Ditto.

2003-06-03  Marcel Telka  <marcel@telka.sk>

    * include/Makefile.am (noinst_HEADERS): Added cmd.h.
    * include/cmd.h: New file.
    * src/cmd/Makefile.am (libcmd_a_SOURCES): Removed cmd.h.
    * src/cmd/cmd.h: File removed. Partially moved to include module (file brux/cmd.h).

    * src/cmd/detectflash.c (cmd_detectflash_help): Changed help text.

2003-06-03  Marcel Telka  <marcel@telka.sk>

    * src/readmem.c (detectflash): Function extracted to module libbrux, file flash/detectflash.c.

2003-06-03  Marcel Telka  <marcel@telka.sk>

    * include/jtag.h (detectflash, flashmem, flashmsbin): Declarations moved to include module,
        file brux/flash.h.

2003-06-03  Marcel Telka  <marcel@telka.sk>

    * src/cmd/cable.c (cmd_cable_run): Added bus deallocation.
    * src/cmd/detectflash.c (cmd_detectflash_run): Removed cable connection test.
    * src/cmd/flashmem.c (cmd_flashmem_run): Ditto.
    * src/cmd/peekpoke.c (cmd_peek_run, cmd_poke_run): Ditto.
    * src/cmd/readmem.c (cmd_readmem_run): Ditto.

2003-06-03  Marcel Telka  <marcel@telka.sk>

    * src/flash.c (flashmsbin, flashmem): Removed '\r' from translatable messages.
    * src/readmem.c (readmem): Ditto.

2003-06-03  Marcel Telka  <marcel@telka.sk>

    * src/cmd/Makefile.am (libcmd_a_SOURCES): Added peekpoke.c (patch 747447, Matan Ziv-Av).
    * src/cmd/cmd.c (cmds): Added peek and poke commands (patch 747447, Matan Ziv-Av).
    * src/cmd/peekpoke.c: New file (patch 747447, Matan Ziv-Av).
    * po/POTFILES.in: Updated.

    * include/bus.h (bus_t): Declaration moved to include module (brux/bus.h).
    * include/cfi.h (cfi_chip_t, cfi_array_t, cfi_array_free, detect_cfi): Declarations moved
        to include module (brux/cfi.h).

2003-06-02  Marcel Telka  <marcel@telka.sk>

    * Makefile.am (SUBDIRS): Added libbrux.
    * configure.ac (AC_CONFIG_FILES): Removed src/flash/Makefile.
    (AC_CONFIG_SUBDIRS): Added libbrux.
    * src/Makefile.am (SUBDIRS): Removed flash.
    (jtag_DEPENDENCIES): Removed flash/libflash.a, added ../libbrux/libbrux.a.
    (jtag_LDADD): Removed libflash, added libbrux.
    * src/flash/Makefile.am: File removed.
    * src/flash/amd.c: File moved to module libbrux, directory flash.
    * src/flash/cfi.c: Ditto.
    * src/flash/intel.c: Ditto.

2003-05-30  Marcel Telka  <marcel@telka.sk>

    * src/tap/parport/direct.c (direct_set_control): Inverted SELECT, AUTOFD, and STROBE
        signals (bug 745824).
    * src/tap/parport/ppdev.c (ppdev_set_control): Ditto.
    * src/tap/cable/mpcbdm.c (mpcbdm_init, mpcbdm_set_trst): Changed (inverted) TRST handling.
    (mpcbdm_clock, mpcbdm_get_tdo): Removed TRST setting.

2003-05-29  Marcel Telka  <marcel@telka.sk>

    Version 0.4 released.

2003-05-29  Marcel Telka  <marcel@telka.sk>

    * src/bsdl2jtag.c (main): Renamed 'pin' keyword to 'signal'.
    * src/part/parse.c (read_part): Added support for 'signal' keyword.

    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added new files.
    * data/dec/PARTS: New file.
    * data/dec/sa1100/STEPPINGS: New file (thanks to Jachym Holecek).
    * data/dec/sa1100/sa1100: New file.

2003-05-28  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_INIT): Changed version number to 0.4.

    * src/cmd/frequency.c (cmd_frequency_run): Added support for printing current TCK frequency.
    (cmd_frequency_help): Updated help text.

    * po/POTFILES.in: Updated.
    * src/detect.c (find_record, detect_parts): Marked messages for translation.
    * src/discovery.c (detect_register_size, discovery): Ditto.
    * src/flash.c (set_flash_driver, flashcheck, flashmsbin, flashmem): Ditto.
    * src/readmem.c (readmem): Ditto.
    * src/flash/amd.c (amd_flash_print_info, amd_32_flash_driver): Ditto.
    * src/flash/intel.c (_intel_flash_print_info, intel_flash_erase_block, intel_flash_unlock_block)
    (intel_flash_program, intel_32_flash_driver, intel_16_flash_driver): Ditto.
    * src/tap/cable/arcom.c (arcom_cable_driver): Ditto.
    * src/tap/cable/byteblaster.c (byteblaster_cable_driver): Ditto.
    * src/tap/cable/dlc5.c (dlc5_cable_driver): Ditto.
    * src/tap/cable/ea253.c (ea253_cable_driver): Ditto.
    * src/tap/cable/ei012.c (ei012_cable_driver): Ditto.
    * src/tap/cable/keithkoep.c (keithkoep_cable_driver): Ditto.
    * src/tap/cable/mpcbdm.c (mpcbdm_cable_driver): Ditto.
    * src/tap/cable/wiggler.c (wiggler_cable_driver): Ditto.

2003-05-27  Marcel Telka  <marcel@telka.sk>

    * src/part/part.c (part_set_signal, part_get_signal): Moved variable declarations to beginning
        of a block (Matan Ziv-Av).

2003-05-26  Marcel Telka  <marcel@telka.sk>

    * include/bus.h (new_sh7727_bus): Added function declaration.
    * src/cmd/detect.c (cmd_detect_run): Added bus driver for Hitachi SH7727.
    * src/bus/Makefile.am (libbus_a_SOURCES): Added sh7727.c (patch 743140, Matan Ziv-Av).
    * src/bus/sh7727.c: New file (based on patch 743140, Matan Ziv-Av).

2003-05-26  Marcel Telka  <marcel@telka.sk>

    * include/chain.h (chain_shift_data_registers): Added new parameter `capture_output' (idea from
        patch 743146, Matan Ziv-Av).
    * src/tap/chain.c (chain_shift_data_registers): Ditto.
    All chain_shift_data_registers() function callers updated.

2003-05-26  Marcel Telka  <marcel@telka.sk>

    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added broadcom/bcm5421s/STEPPINGS
        and broadcom/bcm5421s/bcm5421s.
    * data/MANUFACTURERS: Added new manufacturer ID code for Boradcom (patch 743129, Matan Ziv-Av).
    * data/broadcom/PARTS: Added entry for BC5421S (patch 743129, Matan Ziv-Av).
    * data/broadcom/bcm5421s/STEPPINGS: New file (patch 743129, Matan Ziv-Av).
    * data/broadcom/bcm5421s/bcm5421s: Ditto.

2003-05-22  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AM_CONFIG_HEADER): Renamed acconfig.h configuration header to pkgcfg.h.
    * config.h: Ditto.

2003-05-22  Marcel Telka  <marcel@telka.sk>

    * config.h: New file.
    Changed all relevant source files to include this file unconditionaly.
    * Makefile.am (noinst_HEADERS): Added config.h.
    * configure.ac (AM_CONFIG_HEADER): Renamed generated configuration file
        from config.h to acconfig.h.

2003-05-22  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c: Added new global variable 'big_endian'.
    * include/jtag.h: Ditto.
    * src/flash.c (flashmem): Added full support for little/big endian.
    * src/readmem.c (readmem): Ditto.
    * src/cmd/Makefile.am (libcmd_a_SOURCES): Added endian.c.
    * src/cmd/cmd.c (cmds): Added new command 'endian'.
    * src/cmd/endian.c: New file.

2003-05-21  Marcel Telka  <marcel@telka.sk>

    * Makefile.rules: New file.
    * Makefile.am: Added Makefile.rules include.
    (EXTRA_DIST): Added Makefile.rules.
    * data/Makefile.am: Added Makefile.rules include.
    * doc/Makefile.am: Ditto.
    * include/Makefile.am: Ditto.
    * po/Makevars: Ditto.
    * src/Makefile.am: Ditto.
    * src/bus/Makefile.am: Ditto.
    * src/cmd/Makefile.am: Ditto.
    * src/flash/Makefile.am: Ditto.
    * src/lib/Makefile.am: Ditto.
    * src/part/Makefile.am: Ditto.
    * src/tap/Makefile.am: Ditto.

2003-05-21  Marcel Telka  <marcel@telka.sk>

    * include/signal.h: Renamed this file ...
    * include/bssignal.h: ... to this one.
    All includes changed.
    * include/Makefile.am (noinst_HEADERS): Renamed signal.h to bssignal.h.

    * include/data_register.h: Marked local include files with double quotes.
    * include/instruction.h: Ditto.
    * include/part.h: Ditto.

2003-05-21  Marcel Telka  <marcel@telka.sk>

    * include/bsbit.h (bsbit, bsbit_t): Renamed typedef bsbit to bsbit_t.
    All occurences of the bsbit type changed to bsbit_t.

2003-05-21  Marcel Telka  <marcel@telka.sk>

    * include/part.h (part_find_signal): New function declaration.
    (part_set_signal, part_get_signal): Changed parameter signal name to signal pointer.
    * src/part/part.c (part_find_signal): New function.
    (part_set_signal, part_get_signal): Removed signal searching, used supplied pointer to signal.
    * po/POTFILES.in: Added src/bus/ixp425.c, src/bus/pxa2x0.c, and src/bus/sa1110.c.
    * src/bus/ixp425.c (bus_params_t, select_flash, unselect_flash, setup_address, set_data_in)
    (setup_data, ixp425_bus_read_start, ixp425_bus_read_next, ixp425_bus_read_end, ixp425_bus_write)
    (new_ixp425_bus): Optimized signal searching to increase bus access speed.
    * src/bus/pxa2x0.c (bus_params_t, setup_address, set_data_in, setup_data, pxa250_bus_read_start)
    (pxa250_bus_read_next, pxa250_bus_read_end, pxa250_bus_write, new_pxa250_bus): Ditto.
    * src/bus/sa1110.c (bus_params_t, setup_address, set_data_in, setup_data, sa1110_bus_read_start)
    (sa1110_bus_read_next, sa1110_bus_read_end, sa1110_bus_write, new_sa1110_bus): Ditto.
    (sa1110_bus_width): Updated part_get_signal() function call. Added explicit signal search.
    * src/cmd/get.c (cmd_get_run): Ditto.
    * src/cmd/set.c (cmd_set_run): Updated part_set_signal() function call. Added explicit signal search.

2003-05-20  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_CONFIG_FILES): Added src/cmd/Makefile.
    * include/Makefile.am (noinst_HEADERS): Added jtag.h.
    * include/jtag.h: New file.
    * po/POTFILES.in: Updated.
    * src/Makefile.am (SUBDIRS): Added cmd.
    (jtag_SOURCES): Removed jtag.h and help.c.
    (jtag_DEPENDENCIES): Added cmd/libcmd.a.
    (jtag_LDADD): Added libcmd.
    (INCLUDES): Removed JTAG_DATA_DIR.
    * src/help.c: File removed.
    * src/jtag.h: Ditto.
    * src/jtag.c (jtag_parse_line): Removed command parsing and moved it to cmd directory.
    (jtag_parse_file): Function is no longer static.
    * src/cmd/Makefile.am: New file.
    * src/cmd/cable.c: Ditto.
    * src/cmd/cmd.c: Ditto.
    * src/cmd/cmd.h: Ditto.
    * src/cmd/detect.c: Ditto.
    * src/cmd/detectflash.c: Ditto.
    * src/cmd/discovery.c: Ditto.
    * src/cmd/dr.c: Ditto.
    * src/cmd/flashmem.c: Ditto.
    * src/cmd/frequency.c: Ditto.
    * src/cmd/get.c: Ditto.
    * src/cmd/help.c: Ditto.
    * src/cmd/instruction.c: Ditto.
    * src/cmd/print.c: Ditto.
    * src/cmd/quit.c: Ditto.
    * src/cmd/readmem.c: Ditto.
    * src/cmd/script.c: Ditto.
    * src/cmd/set.c: Ditto.
    * src/cmd/shift.c: Ditto.

    * src/part/part.c (parts_print): Fixed header printing.

2003-05-20  Marcel Telka  <marcel@telka.sk>

    * src/part/data_register.c: Added l10n support. Marked messages for translation.
    * src/part/instruction.c: Ditto.
    * src/part/parse.c: Ditto.
    * po/POTFILES.in: Added above files.

2003-05-19  Marcel Telka  <marcel@telka.sk>

    * src/tap/parport/ppdev.c (ppdev_get_status): Inverted BUSY signal value.

    * include/cfi.h (cfi_chip_t, cfi_array_t): New typedefs.
    (cfi_array_free): New function prototype.
    (detect_cfi): Changed function prototype.
    * include/flash.h (set_flash_driver): Removed function prototype.
    * src/flash/cfi.c (BW16): Macro removed.
    (read2): Function removed.
    (cfi_array_free): New function.
    (detect_cfi): Added code to detect all CFI chips on the data bus.
    * src/flash.c (flashcheck): Removed bus width checking. Updated due changes in src/flash/cfi.c.
    (flashmsbin): Updated due changes in src/flash/cfi.c. Removed memory leak.
    * src/readmem.c: Added l10n support. Marked messages for translation.
    (detectflash): Updated due changes in src/flash/cfi.c. Removed memory leak.
        Removed flash driver setup.
    * po/POTFILES.in: Added src/readmem.c.

2003-05-16  Marcel Telka  <marcel@telka.sk>

    * include/part.h (part_print): New function declaration.
    * src/part/part.c: Marked all user visible messages for translation.
    (part_print): New function.
    (parts_print): Simplified. Added part_print() call.
    * po/POTFILES.in: Added src/part/part.c.

    * src/Makefile.am (jtag_DEPENDENCIES): Added flash/libflash.a.

2003-05-15  Marcel Telka  <marcel@telka.sk>

    * include/cfi.h (detect_cfi): Added new parameter `adr'.
    All relevant functions and callers updated.

2003-05-15  Marcel Telka  <marcel@telka.sk>

    * configure.ac (CPPFLAGS): Added path to the openwince include arm directory.
    * include/bus.h (bus_width): Added new `adr' parameter for this macro.
    All relevant functions and callers updated.

    * src/bus/pxa2x0.c (bus_params_t): Added last_adr and MC_registers structure members.
    (LAST_ADR, MC_pointer): New macros.
    (pxa250_bus_read_start, pxa250_bus_read_next, pxa250_bus_read_end, pxa250_bus_write): Disabled
        external bus cycles for addresses above 0x04000000.
    (pxa250_bus_width): Removed some output messages. Implemented BOOT_DEF emulation.
    (new_pxa250_bus): Implemented BOOT_DEF emulation.

2003-05-14  Marcel Telka  <marcel@telka.sk>

    * include/Makefile.am (noinst_HEADERS): Added cfi.h.
    * include/cfi.h: New file.
    * src/jtag.h (detect_cfi): Removed function declaration.
    * src/flash.c: Replaced jtag.h include with cfi.h.
    * src/readmem.c: Ditto.

    * src/flash/Makefile.am (libflash_a_SOURCES): Added cfi.c.
    * src/Makefie.am (jtag_SOURCES): Removed cfi.c.
    * src/cfi.c: Moved this file ...
    * src/flash/cfi.c: ... here and replaced jtag.h include with cfi.h one.

2003-05-14  Marcel Telka  <marcel@telka.sk>

    * include/part.h (part_t, parts_t): Macros removed.
    * src/detect.c: Replaced obsolete types `parts' with `parts_t' and `part' with `part_t'.
    * src/part/parse.c: Ditto.
    * src/part/part.c: Ditto.

2003-05-14  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_CONFIG_FILES): Added src/flash/Makefile.
    * include/Makefile.am (noinst_HEADERS): Added flash.h.
    * src/Makefile.am (SUBDIRS): Added flash.
    (jtag_SOURCES): Removed flash.h, flash-intel.c, and flash-amd.c.
    (jtag_LDADD): Added libflash.
    * src/flash-amd.c: Moved this file ...
    * src/flash/amd.c: ... here.
    * src/flash-intel.c: Moved this file ...
    * src/flash/intel.c: ... here.
    * src/flash.h: Moved this file ...
    * include/flash.h: ...here.
    * src/flash/Makefile.am: New file.

2003-05-13  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (jtag_parse_file): Added support for command scripts from stdin.

2003-04-29  Marcel Telka  <marcel@telka.sk>

    * data/MANUFACTURERS: Added new manufacturer: DEC.

    * src/jtag.c (jtag_create_jtagdir): Changed permissions for jtag directory.

    * include/part.h (part_alloc, read_part): Changed return type from `part *' to `part_t *'.
    (struct parts): Changed parts member type from `part **' to `part_t **'.
    (parts_alloc): Changed return type from `parts *' to `parts_t *'.
    * src/bus/ixp425.c (select_flash, unselect_flash, setup_address, set_data_in, setup_data):
        Changed first parameter type from `part *' to `part_t *'.
    * src/bus/pxa250.c (setup_address, set_data_in, setup_data): Ditto.
    * src/bus/sa1110.c (setup_address, set_data_in, setup_data): Ditto.

    * include/bus.h: Replaced static bus_driver_t architecture with dynamic bus_t.
        Removed direct chain_t dependency. Added `params' and `prepare' members.
    All related functions' parameter types changed.
    * src/bus/ixp425.c (bus_params_t): New structure typedef.
    (CHAIN, PART): New macros.
    (ixp425_bus_prepare, ixp425_bus_free, new_ixp425_bus): New functions.
    (ixp425_bus_driver, ixp425_bus): Renamed `ixp425_bus_driver' to `ixp425_bus' and updated
        for new bus driver architecture.
    * src/bus/pxa250.c (bus_params_t): New structure typedef.
    (CHAIN, PART): New macros.
    (pxa250_bus_prepare, pxa250_bus_free, new_pxa250_bus): New functions.
    (pxa250_bus_driver, pxa250_bus): Renamed `pxa250_bus_driver' to `pxa250_bus' and updated
        for new bus driver architecture.
    * src/bus/sa1110.c (bus_params_t): New structure typedef.
    (CHAIN, PART): New macros.
    (sa1110_bus_prepare, sa1110_bus_free, new_sa1110_bus): New functions.
    (sa1110_bus_driver, sa1110_bus): Renamed `sa1110_bus_driver' to `sa1110_bus' and updated
        for new bus driver architecture.
    * src/readmem.c (detectflash, readmem): Moved JTAG chain initialization to bus->prepare().
    * src/flash.c (flashcheck): Ditto.
    (flashmsbin, flashmem): Removed BYPASS instruction setup.
    * src/jtag.c (bus_driver, bus): Replaced `bus_driver' with `bus' global variable.
    (jtag_parse_line, main): Added `bus' deallocation.
    * src/flash.h (flash_driver_t): Changed parameter type for all function members from
        `chain_t*' to `bus_t *'.
    All function callers changed.

2003-04-04  Marcel Telka  <marcel@telka.sk>

    Version 0.3.2 released.

2003-04-04  Marcel Telka  <marcel@telka.sk>

    * data/xilinx/PARTS: Added XCR3256XL-FT256 (Jachym Holecek).
    * data/xilinx/xcr3256xl-ft256/STEPPINGS: New file (Jachym Holecek).
    * data/xilinx/xcr3256xl-ft256/xcr3256xl-ft256: Ditto.
    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added new files.

2003-04-02  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_INIT): Changed version number to 0.3.2.

2003-04-02  Marcel Telka  <marcel@telka.sk>

    * include/signal.h: Changed signal typedef to signal_t (thanks to Jachym Holecek).
        All `signal' instances renamed to `signal_t'.
    * src/tap/parport.c: Ported to NetBSD/i386 (Jachym Holecek).
    * src/tap/parport/direct.c (parport_drivers): Conditionally removed direct_parport_driver.
    * configure.ac: Added test for i386_set_ioperm() function. Defined HAVE_IOPERM
        and HAVE_I386_SET_IOPERM.

2003-04-01  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable/keithkoep.c: New file.
    * src/tap/Makefile.am (libtap_a_SOURCES): Added cable/keithkoep.c.
    * src/tap/cable.c (cable_drivers): Added keithkoep_cable_driver.

2003-03-19  Marcel Telka  <marcel@telka.sk>

    Version 0.3.1 released.

2003-03-19  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_CONFIG_FILES): Added doc/Makefile.
    * Makefile.am (SUBDIRS): Added doc.

2003-03-18  Marcel Telka  <marcel@telka.sk>

    * src/tap/parport/direct.c (direct_connect): Fixed cable disconnecting loop.

2003-03-18  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (jtag_parse_line) <script>: Added support for `quit' command in scripts.
    (jtag_parse_rc): Ditto.
    (jtag_parse_file): Added support for comments and `quit' command in scripts.
    (main): Added command line parameter list execution as scripts.
    * data/intel/pxa250/STEPPING: Added support for Intel PXA255 A0 (thanks to Mike Sprauve).
    * configure.ac (AC_INIT): Changed version number to 0.3.1.

2003-03-18  Marcel Telka  <marcel@telka.sk>

    * po/POTFILES.in: Added src/tap/parport/direct.c and src/tap/parport/ppdev.c.
    * src/help.c (help) <cable>: Added help for `cable ppdev' command.
    * src/tap/parport/ppdev.c (ppdev_open): Removed debug messages.
    * src/jtag.c (jtag_parse_line) <cable>: Added chain_disconnect() call before
        new cable connection.

2003-03-18  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_CHECK_HEADERS): Added test for linux/ppdev.h.
    * src/tap/Makefile.am (libtap_a_SOURCES): Added parport/ppdev.c.
    * src/tap/parport.c (parport_drivers): Added ppdev parport driver.
    * src/tap/parport/ppdev.c: New file.

2003-03-18  Marcel Telka  <marcel@telka.sk>

    * src/bsdl2jtag.c (endline): Removed compile warning.

2003-03-18  Marcel Telka  <marcel@telka.sk>

    * include/parport.h: New file. Added parport driver support.
        All cable drivers modified.
    * src/tap/parport.c: Ditto.
    * src/tap/parport/direct.c: Ditto.
    * src/jtag.c (jtag_parse_line) <cable>: Added parport driver support.
    * include/Makefile.am (noinst_HEADERS): Added parport.h.
    * src/tap/cable/generic.c: New file withgGeneric functions for cable drivers.
        All cable drivers modified.
    * src/tap/cable/generic.h: Ditto.
    * src/tap/Makefile.am (libtap_a_SOURCES): Added parport.c, parport/direct.c, cable/generic.h,
        and cable/generic.c.

    * include/cable.h: Added dynamic cable objects. Added cable interpose functions.
        All callers changed.
    * src/tap/cable.c: Ditto.

    * include/chain.h (chain_connect): Function removed.
    (chain_disconnect): New function.
    * src/tap/chain.c (chain_free): Modified for chain_disconnect() call.
    (chain_connect): Removed.
    (chain_disconnect): New function.

2003-03-17  Marcel Telka  <marcel@telka.sk>

    * src/Makefile.am (bin_PROGRAMS, bsdl2jtag_SOURCES): Added new bsdl2jtag conversion
        tool (Matan Ziv-Av).
    * src/bsdl2jtag.c: New file (Matan Ziv-Av).

2003-03-14  Marcel Telka  <marcel@telka.sk>

    * configure.ac (CPPFLAGS): Added common include paths.
    * src/Makefile.am (INCLUDES): Removed common include paths.
    * src/bus/Makefile.am (INCLUDES): Ditto.
    * src/part/Makefile.am (INCLUDES): Ditto.
    * src/tap/Makefile.am (INCLUDES): Ditto.

2003-03-13  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_CONFIG_HEADERS): Replaced this `new' macro ...
    (AM_CONFIG_HEADER): ... with this `old' one to make build compatible with automake-1.6.
    (AM_GNU_GETTEXT_VERSION): Relaxed version number from 0.11.5 to 0.11.4.
    * src/Makefile.am (jtag_LDADD): Added LIBINTL.
    (LIBS): Removed LIBINTL.
    (DEFS): Removed whole content ...
    (INCLUDE): ... and added it here.

2003-03-13  Marcel Telka  <marcel@telka.sk>

    * include/chain.h: New file.
    * src/tap/chain.c: Ditto.
    * src/tap/Makefile.am (libtap_a_SOURCES): Added chain.c.
    * include/Makefile.am (noinst_HEADERS): Added chain.h.
    * src/jtag.c: Encapsulated parts, cable and TAP state into one object - chain.
        All relevant function parameters changed to `chain'.
    * src/tap/state.c: `trst' state moved to cable drivers.
        All cable drivers changed.
    * include/cable.h (cable_driver_t) <set_trst>: Changed return value from void to int.
        All cable drivers changed.
    (cable_driver_t) <get_trst>: New function.
        Implemented this function to all cable drivers.
    * include/part.h (part_shift_instruction, part_shift_data_register)
    (parts_shift_instructions, parts_shift_data_registers): Funcions removed.
    * src/part/part.c (part_shift_instruction, part_shift_data_register)
    (parts_shift_instructions, parts_shift_data_registers): Ditto.
    * src/tap/cable/arcom.c: Removed dependency on state.h.
    * src/tap/cable/byteblaster.c: Ditto.
    * src/tap/cable/dlc5.c: Ditto.
    * src/tap/cable/ea253.c: Ditto.
    * src/tap/cable/ei012.c: Ditto.
    * src/tap/cable/mpcbdm.c: Ditto.
    * src/tap/cable/wiggler.c: Ditto.

    * include/state.h (bit): Replaced with common.h include.
    (Unknown_State, Run_Test_Idle, Select_DR_Scan, Select_IR_Scan): Removed parentheses.
    * include/tap.h (write_command): Removed unused declaration.

    * src/detect.h: Removed file.
    * src/jtag.h: New file with common jtag function declarations.
    * src/Makefile.am (jtag_SOURCES): Removed detect.h, added jtag.h.
    * src/cfi.c: Added jtag.h include. Moved common function declarations to jtag.h file.
    * src/detect.c: Ditto.
    * src/discovery.c: Ditto.
    * src/flash.c: Ditto.
    * src/help.c: Ditto.
    * src/jtag.c: Ditto.
    * src/readmem.c: Ditto.

    * src/jtag.c (jtag_create_jtagdir, jtag_load_history, jtag_save_history, jtag_parse_line)
    (jtag_readline_loop, jtag_parse_file, jtag_parse_rc): Changed functions to `static'.

    * src/tap/tap.c: Added l10n support.
    * po/POTFILES.in: Added src/tap/chain.c and src/tap/tap.c.

2003-03-13  Marcel Telka  <marcel@telka.sk>

    * include/part.h: Renamed types part to part_t, parts to parts_t,
        tap_register to tap_register_t.
    * include/register.h: Renamed tap_register type to tap_register_t.

2003-03-11  Marcel Telka  <marcel@telka.sk>

    * configure.ac: Improved openwince include package detection.

2003-03-07  Marcel Telka  <marcel@telka.sk>

    * src/lib/getdelim.c: Added unistd.h include for ssize_t.
    * src/lib/getline.c: Ditto.

2003-03-06  Marcel Telka  <marcel@telka.sk>

    * configure.ac: Added test for readline library.
    * src/Makefile.am (jtag_LDADD): Removed readline and ncurses.

2003-03-06  Marcel Telka  <marcel@telka.sk>

    * autogen.sh: Added test for autoreconf fail.

2003-02-25  Marcel Telka  <marcel@telka.sk>

    Version 0.3 released.

2003-02-25  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable.c: Added config.h include.

2003-02-25  Marcel Telka  <marcel@telka.sk>

    * data/MANUFACTURERS: Added Hitachi (Matan Ziv-Av).
    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added Hitachi SH7727
        files (Matan Ziv-Av).
    * data/hitachi/PARTS: New file (Matan Ziv-Av).
    * data/hitachi/sh7727/STEPPINGS: Ditto.
    * data/hitachi/sh7727/sh7727: Ditto.

2003-02-25  Marcel Telka  <marcel@telka.sk>

    * data/MANUFACTURERS: Added Broadcom (Matan Ziv-Av).
    * data/Makefile.am (nobase_dist_pkgdata_DATA): Added Broadcom BCM1250
        files (Matan Ziv-Av).
    * data/broadcom/PARTS: New file (Matan Ziv-Av).
    * data/broadcom/bcm1250/STEPPINGS: Ditto.
    * data/broadcom/bcm1250/bcm1250: Ditto.

2003-02-21  Marcel Telka  <marcel@telka.sk>

    * src/help.c (help): Marked translatable strings.
    * src/jtag.c (jtag_parse_line): Ditto.
    (jtag_parse_file): Ditto.
    (main): Ditto.
    * po/POTFILES.in: Added src/help.c and src/jtag.c.

2003-02-21  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (main): Added conditional compilation for l10n.

2003-02-20  Marcel Telka  <marcel@telka.sk>

    * src/Makefile.am (jtag_SOURCES): Added missing flash.h.
    * src/jtag.c: Added missing string.h include. Moved gettext.h include
        to the top level of the include list.
    * src/help.c: Moved gettext.h include to the top level of the include list.

2003-02-20  Marcel Telka  <marcel@telka.sk>

    * Makefile.am (SUBDIRS): Removed intl.
    * autogen.sh: Replaced subsequent call of auto* tools with autoreconf one.
    * configure.ac (AC_CONFIG_FILES): Removed intl/Makefile.
    (AM_GNU_GETTTEXT): Added 'external' parameter.

2003-02-19  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_CONFIG_HEADERS): Added new macro with config.h.
    * autogen.sh: Added autoheader invocation.

2003-02-18  Marcel Telka  <marcel@telka.sk>

    * include/Makefile.am (noinst_HEADERS): Added gettext.h.

2003-02-18  Marcel Telka  <marcel@telka.sk>

    * autogen.sh: Added autopoint call. Added '-I m4' parameter for aclocal.
    * Makefile.am (SUBDIRS): Added intl, include and po.
    (DIST_SUBDIRS): Removed.
    (ACLOCAL_AMFLAGS): Added '-I m4'.
    * configure.ac (AC_INIT): Changed version number to 0.3.
    (AC_CONFIG_FILES): Added intl/Makefile and po/Makefile.in.
    (AM_GNU_GETTEXT): Added.
    (AM_GNU_GETTEXT_VERSION): Added with version 0.11.5.
    * include/gettext.h: Copied new file from gettext share.
    * po/LINGUAS: Added new empty file.
    * po/Makevars: Added new file.
    * po/POTFILES.in: Added new empty file.
    * src/Makefile.am (INCLUDES): Removed JTAG_DATA_DIR.
    (localedir): Added path to locale directory.
    (DEFS): Added JTAG_DATA_DIR and LOCALEDIR.
    (LIBS): Added LIBINTL.
    * src/help.c: Included gettext.h.
    * src/jtag.c: Included gettext.h.
    (main): Added l10n support.

2003-02-18  Marcel Telka  <marcel@telka.sk>

    * src/flash.c (flashmsbin): Changed flash error message.
    (flashmem): Changed output messages. Enabled verify for 2 x 16, not
        for 1 x 16. Added better end of file test for verify.

2003-02-18  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_CONFIG_FILES): Added src/bus/Makefile.
    * src/bus.h: Moved this file...
    * include/bus.h: ...here.
    * include/Makefile.am (noinst_HEADERS): Added bus.h.
    * src/ixp425.c: Moved this file...
    * src/bus/ixp425.c: ...here.
    * src/pxa250.c: Moved this file...
    * src/bus/pxa2x0.c: ...here.
    * src/sa1110.c: Moved this file...
    * src/bus/sa1110.c: ...here.
    * src/bus/Makefile.am: New file.
    * src/Makefile.am (SUBDIRS): Added bus.
    (jtag_SOURCES): Removed bus.h, ixp425.c, pxa250.c, sa1110.c.
    (jtag_DEPENDENCIES): Added libbus.a.
    (jtag_LDADD): Ditto.

2003-02-18  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable.c: Added <sys/types.h> include for useconds_t on some systems.
    * src/flash-amd.c (amdstatus29): Disabled unused function.
    (amdisprotected): Ditto.

2003-02-17  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (jtag_parse_line): Fixed segfault for 'set' command.

2003-02-17  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (jtag_parse_line): Added new 'get signal' command.
    * src/help.c (help): Added help for new 'get signal' command.

2003-02-17  Marcel Telka  <marcel@telka.sk>

    * data/intel/pxa250/pxa250: Changed comment.
    * data/intel/pxa250/pxa250c0: Ditto.

2003-02-17  Marcel Telka  <marcel@telka.sk>

    * src/help.c (help): Added help for new command 'script'.

2003-02-17  Marcel Telka  <marcel@telka.sk>

    * src/flash-intel.c (intel_flash_autodetect): Fixed Intel flash algorithm Id.
    (intel_flash_autodetect32): Ditto.

2003-02-17  Marcel Telka  <marcel@telka.sk>

    * configure.ac (AC_CHECK_FUNCS): Added getdelim and getline.
    (AC_CONFIG_FILES): Added src/lib/Makefile.
    * src/Makefile.am (SUBDIRS): Added lib.
    (jtag_DEPENDENCIES): Added libjtaglib.a.
    (jtag_LDADD): Ditto.
    * src/jtag.c: Added portable getline() declaration.
    * src/lib/Makefile.am: New file.
    * src/lib/getdelim.c: Ditto.
    * src/lib/getline.c: Ditto.

2003-02-16  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (jtag_creae_jtagdir): New function (Alessandro Zummo).
    (jtag_load_history): Ditto.
    (jtag_save_history): Ditto.
    (jtag_readline_loop): Ditto.
    (jtag_parse_file): Ditto.
    (jtag_parse_rc): Ditto.
    (jtag_parse_line): New funcion, content extracted from main function, added new
        'script' command (Alessandro Zummo).
    (main): Moved parsing capability to jtag_parse_line function (Alessandro Zummo).

2003-02-16  Marcel Telka  <marcel@telka.sk>

    * src/flash.c (flash_drivers): Added missing 1 x 16 Intel flash driver.

2003-02-16  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (main): Corrected error message for 'instruction' command and added
        a notice when an instruction is unknown (Alessandro Zummo).

2003-02-16  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (main): Fixed segfault in 'detectflash'. Thanks to August Hörandl
        for reporting this issue.

2003-02-16  Marcel Telka  <marcel@telka.sk>

    * src/Makefile.am (jtag_SOURCES): Added new flash files with flash driver
        framework (August Hörandl).
    * src/flash-amd.c: New file with AMD flash support (August Hörandl).
    * src/flash-intel.c: New file. Extracted Intel flash support from src/flash.c
        file (August Hörandl, me).
    * src/flash.c (set_flash_driver): New function. Added support for flash
        drivers (August Hörandl).
    (flashceck): Ditto.
    (flashmsbin): Added support for flash driver (August Hörandl).
    (flashmem): Ditto.
    (flash_erase_block): Function moved to src/flash-intel.c (August Hörandl).
    (flash_unlock_block): Ditto.
    (flash_program): Ditto.
    (flash_erase_block32): Ditto.
    (flash_unlock_block32): Ditto.
    (flash_program32): Ditto.
    * src/flash.h: New file. Interface for flash drivers (August Hörandl).
    * src/help.c (help): Added list of supported flash drivers for 'flashmem'
        command (August Hörandl).
    * src/readmem.c (detectflash): Removed Intel specific code. Enhanced output
        messages (August Hörandl).

2003-02-14  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (jtag): Added command history load/save support (August Hörandl).

2003-02-14  Marcel Telka  <marcel@telka.sk>

    * src/readmem.c (readmem): Added support for 1 x 16 bit memory configuration and
        buffered file writes (Christian Pellegrin).
    * src/flash.c (flashmem): Added support for 1 x 16 bit flash configuration and
        buffered file reads (Christian Pellegrin).
    (flash_erase_block): Added debug messages (Christian Pellegrin).
    (flash_unlock_block): Added debug message (Christian Pellegrin).
    (flash_program): Ditto.

2003-02-14  Marcel Telka  <marcel@telka.sk>

    * src/cfi.c (detect_cfi): Added support for 1 x 16 bit flash configuration (Christian
        Pellegrin).
    * src/detect.c (find_record): Added error message if file cannot be opened (Christian
        Pellegrin).

2003-02-14  Marcel Telka  <marcel@telka.sk>

    * data/xilinx/xc2c256-tq144/xc2c256-tq144: Added JTAG declarations for Xilinx
        XC2C256-TQ144 (Alessandro Zummo).
    * data/xilinx/xc2c256-tq144/STEPPINGS: Ditto.
    * data/xilinx/PARTS: Ditto.
    * data/Makefile.am: Ditto.

2003-02-14  Marcel Telka  <marcel@telka.sk>

    * src/ixp425.c (setup_address): Removed set_gpio() call.
    (set_gpio): Removed unused function.

2003-02-13  Marcel Telka  <marcel@telka.sk>

    * src/ixp425.c: Added bus driver for Intel IXP425 (Christian Pellegrin).
    * src/bus.h: Ditto.
    * src/jtag.c (main): Ditto.
    * src/Makefile.am (jtag_SOURCES): Added ixp425.c (Christian Pellegrin).

2003-02-13  Marcel Telka  <marcel@telka.sk>

    * data/intel/ixp425/ixp425: Added JTAG declarations for Intel IXP425 (Christian
        Pellegrin).
    * data/intel/ixp425/STEPPINGS: Ditto.
    * data/intel/PARTS: Ditto.
    * data/Makefile.am: Ditto.

2003-02-13  Marcel Telka  <marcel@telka.sk>

    * include/bsbit.h (BSBIT_BIDIR): Added new macro (Christian Pellegrin).
    * src/part/bsbit.c (bsbit_alloc): Added support for bidirectional pins (Christian
        Pellegrin).
    * src/part/parse.ci (read_part): Ditto.

2003-02-10  Marcel Telka  <marcel@telka.sk>

    * src/sa1110.c (sa1110_bus_read_start): Added support for all six static memory banks.
        The function is now 'static'.
    (sa1110_bus_read_end): Ditto.
    (sa1110_bus_read_next): The function is now 'static'.
    (sa1110_bus_read): Ditto.
    (sa1110_bus_width): Ditto.
    (sa1110_bus_write): Added support for all six static memory banks (bug 682660).
        The function is now 'static'.

2003-02-07  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable/arcom.c: Added support for Arcom JTAG Cable (patch 682310,
        Ian Campbell).
    * src/tap/cable.c: Ditto.
    * src/tap/Makefile.am: Ditto.

2003-02-07  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable/mpcbdm.c (mpcbdm_clock): Fixed port address for TRST & TRST1.

2003-02-07  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable/mpcbdm.c: Added support for Mpcbdm JTAG Cable (Christian Pellegrin).
    * src/tap/cable.c: Ditto.
    * src/tap/Makefile.am: Ditto.

2003-02-04  Marcel Telka  <marcel@telka.sk>

    * src/help.c (help): Added missing short help description for 'set' command.
    * src/jtag.c (main): Added test for uninitialized ps for 'set' command.
    * src/tap/tap.c (tap_shift_register): Changed final state to Run-Test/Idle
        for immediately propagation of the new BSR values.

2003-02-04  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (main): Added more checks for syntax errors. Added support for
        printing input data registers - command 'dr'. Added 'set signal'
        command.
    * src/help.c (help): Updated help for 'dr' command, added help for 'set
        signal.

2003-02-04  Marcel Telka  <marcel@telka.sk>

    Version 0.2.2 released.

2003-02-04  Marcel Telka  <marcel@telka.sk>

    * configure.ac: Changed version number to 0.2.2.

2003-02-04  Marcel Telka  <marcel@telka.sk>

    * src/flash.c (flashmsbin): Changed instructions to BYPASS after successfull
        flash.
    (flashmem): Ditto.

2003-01-30  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable/byteblaster.c (byteblaster_init): Added support for
        parallel ports with I/O addresses above 0x3FF.
    (byteblaster_done): Ditto.
    * src/tap/cable/dlc5.c (dlc5_init): Ditto.
    (dlc5_done): Ditto.
    * src/tap/cable/ea253.c (ea253_init): Ditto.
    (ea253_done): Ditto.
    * src/tap/cable/ei012.c (ei012_init): Ditto.
    (ei012_done): Ditto.
    * src/tap/cable/wiggler.c (wiggler_init): Ditto.
    (wiggler_done): Ditto.

2003-01-19  Marcel Telka  <marcel@telka.sk>

    * configure.ac: Added AC_GNU_SOURCE.

2003-01-18  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (main): Added new 'frequency' command.
    * src/help.c (help): Added help for 'frequency' command.
    * include/cable.h (cable_wait): Added new function prototype.
    * src/tap/cable.c (cable_wait): Added new function.
    * src/tap/cable/byteblaster.c (byteblaster_clock): Added support for TCK
        frequency limit.
    (byteblaster_get_tdo): Ditto.
    * src/tap/cable/dlc5.c (dlc5_clock): Ditto.
    (dlc5_get_tdo): Ditto.
    * src/tap/cable/ea253.c (ea253_clock): Ditto.
    (ea253_get_tdo): Ditto.
    * src/tap/cable/ei012.c (ei012_clock): Ditto.
    (ei012_get_tdo): Ditto.
    * src/tap/cable/wiggler.c (wiggler_clock): Ditto.
    (wiggler_get_tdo): Ditto.

2003-01-16  Marcel Telka  <marcel@telka.sk>

    * data/MANUFACTURERS: Added Cypress (patch 669157). Thanks to Chris Ellec.

2003-01-13  Marcel Telka  <marcel@telka.sk>

    Version 0.2.1 released.

2003-01-13  Marcel Telka  <marcel@telka.sk>

    * include/state.h: Added new function tap_state_reset().
    * src/tap/state.c (tap_state_reset): Ditto.
    * src/tap/tap.c (tap_reset): Added explicit TAP state reset.

2003-01-13  Marcel Telka  <marcel@telka.sk>

    * configure.ac: Changed version number to 0.2.1.

2003-01-11  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable/bytebaster.c: Added support for Altera ByteBlaster family cables.
    * src/tap/cable.c: Ditto.
    * src/tap/Makefile.am: Ditto.
    * src/help.c (help): Increased space for cable short name.

2003-01-11  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable/wiggler.c: Added support for Macraigor Wiggler JTAG Cable (Stas Khirman).
    * src/tap/cable.c: Ditto.
    * src/tap/Makefile.am: Ditto.

2003-01-10  Marcel Telka  <marcel@telka.sk>

    * src/tap/cable.c: Added missing stdlib.h include (bug 665923). Thanks to Chris Ellec.

2003-01-09  Marcel Telka  <marcel@telka.sk>

    * src/jtag.c (main): Fixed minor typo in 'cable' output message.

2003-01-09  Marcel Telka  <marcel@telka.sk>

    * src/discovery.c (detect_register_size): Changed register length test iteration.
        Now the test iterates to MAX_REGISTER_LENGTH, not to MAX_REGISTER_LENGTH - 1.

2003-01-08  Marcel Telka  <marcel@telka.sk>

    Version 0.2 released.

2003-01-08  Marcel Telka  <marcel@telka.sk>

    * include/cable.h: Unified and simplified cable driver handling, added driver name
        and driver description into driver interface structure.
    * src/help.c (help): Ditto.
    * src/jtag.c (main): Ditto.
    * src/tap/Makefile.am: Ditto.
    * src/tap/cable.c: Ditto.
    * src/tap/cable/dlc5.c: Ditto.
    * src/tap/cable/ea253.c: Ditto.
    * src/tap/cable/ei012.c: Ditto.

2003-01-08  Marcel Telka  <marcel@telka.sk>

    * include/cable.h: Added cable driver for ETC EI012 JTAG Cable.
    * src/help.c (help): Ditto.
    * src/jtag.c (main): Ditto.
    * src/tap/Makefile.am: Ditto.
    * src/tap/cable/ei012.c: Ditto.

2003-01-08  Marcel Telka  <marcel@telka.sk>

    * configure.ac: Bumped version number to 0.2, added check-new and dist-bzip2
        parameters to AM_INIT_AUTOMAKE() invocation.
    * src/jtag.c: Updated year in initial banner.

2003-01-08  Marcel Telka  <marcel@telka.sk>

    * include/cable.h: Added cable driver for Xilinx DLC5 JTAG Parallel Cable III.
    * src/help.c (help): Ditto.
    * src/jtag.c (main): Ditto.
    * src/tap/Makefile.am: Ditto.
    * src/tap/cable/dlc5.c: Ditto.

2003-01-08  Marcel Telka  <marcel@telka.sk>

    * include/Makefile.am: Removed ctrl.h, added cable.h.
    * include/ctrl.h: Removed obsolete file.
    * include/cable.h: Added common declarations for JTAG cable drivers.
    * src/detect.c: Replaced ctrl.h include with cable.h (JTAG cable driver support).
    * src/discovery.c: Ditto.
    * src/tap/tap.c: Ditto.
    * src/help.c (help): Added help for new command 'cable'.
    * src/jtag.c (main): Added support for JTAG cable drivers, added new command 'cable'.
    * src/tap/Makefile.am: Removed ctrl.c, added cable/ea253.c, updated includes.
    * src/tap/ctrl.c: Removed obsolete file.
    * src/tap/state.c: Changed default TRST state to 1.
    * src/tap/cable/ea253.c: Added driver for EA253 JTAG cable.

2003-01-06  Marcel Telka  <marcel@telka.sk>

    * src/discovery.c (discovery): Fixed memory leaks, added out of memory test,
        added test for invalid IR length.

2003-01-05  Marcel Telka  <marcel@telka.sk>

    * include/register.h (register_inc, register_dec, register_shift_right,
        register_shift_left): Added new functions.
    * src/tap/register.c (register_inc, register_dec, register_shift_right,
        register_shift_left): Ditto.
    * src/Makefile.am: Added discovery.c file.
    * src/discovery.c: Added new file with discovery() implementation.
    * src/help.c (help): Added help for 'discovery' command.
    * src/jtag.c (main): Added 'discovery' command.
    * src/tap/tap.c (write_command): Removed unused function.

2002-12-16  Marcel Telka  <marcel@telka.sk>

    * data/Makefile.am: Renamed intel/pxa250/pxa260 to intel/pxa250/pxa250c0.

2002-12-11  Marcel Telka  <marcel@telka.sk>

    * data/intel/pxa250/STEPPINGS: Renamed file pxa260 to pxa250c0.
    * data/intel/pxa260: Ditto.
    * data/intel/pxa250c0: Ditto.

2002-11-29  Marcel Telka  <marcel@telka.sk>

    * src/flash.c (flashmsbin, flashmem): Fixed crash if flash memory is not detected.
    * src/readmem.c (detectflash): Ditto.

2002-11-27  Marcel Telka  <marcel@telka.sk>

    * data/xilinx/xcr3128xl-cs144/xcr3128xl-cs144: Added pins and BSR bits.

2002-11-26  Marcel Telka  <marcel@telka.sk>

    * data/xilinx/xcr3128xl-cs144/xcr3128xl-cs144: Added user-defined
        instructions.

2002-11-25  Marcel Telka  <marcel@telka.sk>

    Version 0.1 released.


$Revision$