clearcpuid=BITNUM [X86]
Disable CPUID feature X for the kernel. See
- arch/x86/include/asm/cpufeature.h for the valid bit
+ arch/x86/include/asm/cpufeatures.h for the valid bit
numbers. Note the Linux specific bits are not necessarily
stable over kernel options, but the vendor specific
ones should be.
See Documentation/x86/intel_mpx.txt for more
information about the feature.
- eagerfpu= [X86]
- on enable eager fpu restore
- off disable eager fpu restore
- auto selects the default scheme, which automatically
- enables eagerfpu restore for xsaveopt.
module.async_probe [KNL]
Enable asynchronous probe on this module.
Format: <first>,<last>
Specifies range of consoles to be captured by the MDA.
+ mds= [X86,INTEL]
+ Control mitigation for the Micro-architectural Data
+ Sampling (MDS) vulnerability.
+
+ Certain CPUs are vulnerable to an exploit against CPU
+ internal buffers which can forward information to a
+ disclosure gadget under certain conditions.
+
+ In vulnerable processors, the speculatively
+ forwarded data can be used in a cache side channel
+ attack, to access data to which the attacker does
+ not have direct access.
+
+ This parameter controls the MDS mitigation. The
+ options are:
+
+ full - Enable MDS mitigation on vulnerable CPUs
+ off - Unconditionally disable MDS mitigation
+
+ On TAA-affected machines, mds=off can be prevented by
+ an active TAA mitigation as both vulnerabilities are
+ mitigated with the same mechanism so in order to disable
+ this mitigation, you need to specify tsx_async_abort=off
+ too.
+
+ Not specifying this option is equivalent to
+ mds=full.
+
+ For details see: Documentation/hw-vuln/mds.rst
+
mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory
Amount of memory to be used when the kernel is not able
to see the whole system memory or for test.
in the "bleeding edge" mini2440 support kernel at
http://repo.or.cz/w/linux-2.6/mini2440.git
+ mitigations=
+ [X86] Control optional mitigations for CPU
+ vulnerabilities. This is a set of curated,
+ arch-independent options, each of which is an
+ aggregation of existing arch-specific options.
+
+ off
+ Disable all optional CPU mitigations. This
+ improves system performance, but it may also
+ expose users to several CPU vulnerabilities.
+ Equivalent to: nopti [X86]
+ nospectre_v1 [X86]
+ nospectre_v2 [X86]
+ spectre_v2_user=off [X86]
+ spec_store_bypass_disable=off [X86]
+ mds=off [X86]
+ tsx_async_abort=off [X86]
+
+ auto (default)
+ Mitigate all CPU vulnerabilities, but leave SMT
+ enabled, even if it's vulnerable. This is for
+ users who don't want to be surprised by SMT
+ getting disabled across kernel upgrades, or who
+ have other ways of avoiding SMT-based attacks.
+ Equivalent to: (default behavior)
+
mminit_loglevel=
[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
parameter allows control of the logging verbosity for
noalign [KNL,ARM]
+ noaltinstr [S390] Disables alternative instructions patching
+ (CPU alternatives feature).
+
noapic [SMP,APIC] Tells the kernel to not make use of any
IOAPICs that may be present in the system.
nohugeiomap [KNL,x86] Disable kernel huge I/O mappings.
+ nospectre_v1 [X86,PPC] Disable mitigations for Spectre Variant 1
+ (bounds check bypass). With this option data leaks are
+ possible in the system.
+
+ nospectre_v2 [X86,PPC_FSL_BOOK3E] Disable all mitigations for the Spectre variant 2
+ (indirect branch prediction) vulnerability. System may
+ allow data leaks with this option, which is equivalent
+ to spectre_v2=off.
+
+ nospec_store_bypass_disable
+ [HW] Disable all mitigations for the Speculative Store Bypass vulnerability
+
noxsave [BUGS=X86] Disables x86 extended register state save
and restore using xsave. The kernel will fallback to
enabling legacy floating-point and sse state.
nojitter [IA-64] Disables jitter checking for ITC timers.
- nopti [X86-64] Disable KAISER isolation of kernel from user.
-
no-kvmclock [X86,KVM] Disable paravirtualized KVM clock driver
no-kvmapf [X86,KVM] Disable paravirtualized asynchronous page
norandmaps Don't use address space randomization. Equivalent to
echo 0 > /proc/sys/kernel/randomize_va_space
- noreplace-paravirt [X86,IA-64,PV_OPS] Don't patch paravirt_ops
-
noreplace-smp [X86-32,SMP] Don't replace SMP instructions
with UP alternatives
pt. [PARIDE]
See Documentation/blockdev/paride.txt.
- pti= [X86_64]
- Control KAISER user/kernel address space isolation:
- on - enable
- off - disable
- auto - default setting
+ pti= [X86_64] Control Page Table Isolation of user and
+ kernel address spaces. Disabling this feature
+ removes hardening, but improves performance of
+ system calls and interrupts.
+
+ on - unconditionally enable
+ off - unconditionally disable
+ auto - kernel detects whether your CPU model is
+ vulnerable to issues that PTI mitigates
+
+ Not specifying this option is equivalent to pti=auto.
+
+ nopti [X86_64]
+ Equivalent to pti=off
pty.legacy_count=
[KNL] Number of legacy pty's. Overwrites compiled-in
Run specified binary instead of /init from the ramdisk,
used for early userspace startup. See initrd.
+ rdrand= [X86]
+ force - Override the decision by the kernel to hide the
+ advertisement of RDRAND support (this affects
+ certain AMD processors because of buggy BIOS
+ support, specifically around the suspend/resume
+ path).
+
reboot= [KNL]
Format (x86 or x86_64):
[w[arm] | c[old] | h[ard] | s[oft] | g[pio]] \
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/laptops/sonypi.txt
+ spectre_v2= [X86] Control mitigation of Spectre variant 2
+ (indirect branch speculation) vulnerability.
+ The default operation protects the kernel from
+ user space attacks.
+
+ on - unconditionally enable, implies
+ spectre_v2_user=on
+ off - unconditionally disable, implies
+ spectre_v2_user=off
+ auto - kernel detects whether your CPU model is
+ vulnerable
+
+ Selecting 'on' will, and 'auto' may, choose a
+ mitigation method at run time according to the
+ CPU, the available microcode, the setting of the
+ CONFIG_RETPOLINE configuration option, and the
+ compiler with which the kernel was built.
+
+ Selecting 'on' will also enable the mitigation
+ against user space to user space task attacks.
+
+ Selecting 'off' will disable both the kernel and
+ the user space protections.
+
+ Specific mitigations can also be selected manually:
+
+ retpoline - replace indirect branches
+ retpoline,generic - google's original retpoline
+ retpoline,amd - AMD-specific minimal thunk
+
+ Not specifying this option is equivalent to
+ spectre_v2=auto.
+
+ spectre_v2_user=
+ [X86] Control mitigation of Spectre variant 2
+ (indirect branch speculation) vulnerability between
+ user space tasks
+
+ on - Unconditionally enable mitigations. Is
+ enforced by spectre_v2=on
+
+ off - Unconditionally disable mitigations. Is
+ enforced by spectre_v2=off
+
+ prctl - Indirect branch speculation is enabled,
+ but mitigation can be enabled via prctl
+ per thread. The mitigation control state
+ is inherited on fork.
+
+ prctl,ibpb
+ - Like "prctl" above, but only STIBP is
+ controlled per thread. IBPB is issued
+ always when switching between different user
+ space processes.
+
+ seccomp
+ - Same as "prctl" above, but all seccomp
+ threads will enable the mitigation unless
+ they explicitly opt out.
+
+ seccomp,ibpb
+ - Like "seccomp" above, but only STIBP is
+ controlled per thread. IBPB is issued
+ always when switching between different
+ user space processes.
+
+ auto - Kernel selects the mitigation depending on
+ the available CPU features and vulnerability.
+
+ Default mitigation:
+ If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
+
+ Not specifying this option is equivalent to
+ spectre_v2_user=auto.
+
+ spec_store_bypass_disable=
+ [HW] Control Speculative Store Bypass (SSB) Disable mitigation
+ (Speculative Store Bypass vulnerability)
+
+ Certain CPUs are vulnerable to an exploit against a
+ a common industry wide performance optimization known
+ as "Speculative Store Bypass" in which recent stores
+ to the same memory location may not be observed by
+ later loads during speculative execution. The idea
+ is that such stores are unlikely and that they can
+ be detected prior to instruction retirement at the
+ end of a particular speculation execution window.
+
+ In vulnerable processors, the speculatively forwarded
+ store can be used in a cache side channel attack, for
+ example to read memory to which the attacker does not
+ directly have access (e.g. inside sandboxed code).
+
+ This parameter controls whether the Speculative Store
+ Bypass optimization is used.
+
+ on - Unconditionally disable Speculative Store Bypass
+ off - Unconditionally enable Speculative Store Bypass
+ auto - Kernel detects whether the CPU model contains an
+ implementation of Speculative Store Bypass and
+ picks the most appropriate mitigation. If the
+ CPU is not vulnerable, "off" is selected. If the
+ CPU is vulnerable the default mitigation is
+ architecture and Kconfig dependent. See below.
+ prctl - Control Speculative Store Bypass per thread
+ via prctl. Speculative Store Bypass is enabled
+ for a process by default. The state of the control
+ is inherited on fork.
+ seccomp - Same as "prctl" above, but all seccomp threads
+ will disable SSB unless they explicitly opt out.
+
+ Not specifying this option is equivalent to
+ spec_store_bypass_disable=auto.
+
+ Default mitigations:
+ X86: If CONFIG_SECCOMP=y "seccomp", otherwise "prctl"
+
spia_io_base= [HW,MTD]
spia_fio_base=
spia_pedr=
platforms where RDTSC is slow and this accounting
can add overhead.
+ tsx= [X86] Control Transactional Synchronization
+ Extensions (TSX) feature in Intel processors that
+ support TSX control.
+
+ This parameter controls the TSX feature. The options are:
+
+ on - Enable TSX on the system. Although there are
+ mitigations for all known security vulnerabilities,
+ TSX has been known to be an accelerator for
+ several previous speculation-related CVEs, and
+ so there may be unknown security risks associated
+ with leaving it enabled.
+
+ off - Disable TSX on the system. (Note that this
+ option takes effect only on newer CPUs which are
+ not vulnerable to MDS, i.e., have
+ MSR_IA32_ARCH_CAPABILITIES.MDS_NO=1 and which get
+ the new IA32_TSX_CTRL MSR through a microcode
+ update. This new MSR allows for the reliable
+ deactivation of the TSX functionality.)
+
+ auto - Disable TSX if X86_BUG_TAA is present,
+ otherwise enable TSX on the system.
+
+ Not specifying this option is equivalent to tsx=off.
+
+ See Documentation/hw-vuln/tsx_async_abort.rst
+ for more details.
+
+ tsx_async_abort= [X86,INTEL] Control mitigation for the TSX Async
+ Abort (TAA) vulnerability.
+
+ Similar to Micro-architectural Data Sampling (MDS)
+ certain CPUs that support Transactional
+ Synchronization Extensions (TSX) are vulnerable to an
+ exploit against CPU internal buffers which can forward
+ information to a disclosure gadget under certain
+ conditions.
+
+ In vulnerable processors, the speculatively forwarded
+ data can be used in a cache side channel attack, to
+ access data to which the attacker does not have direct
+ access.
+
+ This parameter controls the TAA mitigation. The
+ options are:
+
+ full - Enable TAA mitigation on vulnerable CPUs
+ if TSX is enabled.
+
+ off - Unconditionally disable TAA mitigation
+
+ On MDS-affected machines, tsx_async_abort=off can be
+ prevented by an active MDS mitigation as both vulnerabilities
+ are mitigated with the same mechanism so in order to disable
+ this mitigation, you need to specify mds=off too.
+
+ Not specifying this option is equivalent to
+ tsx_async_abort=full. On CPUs which are MDS affected
+ and deploy MDS mitigation, TAA mitigation is not
+ required and doesn't provide any additional
+ mitigation.
+
+ For details see:
+ Documentation/hw-vuln/tsx_async_abort.rst
+
turbografx.map[2|3]= [HW,JOY]
TurboGraFX parallel port interface
Format: